Views
5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

SAFETY • Disconnect

SAFETY • Disconnect battery ground cable (−) before making adjustments to electrical systems or before welding on the machine. • Sufficiently illuminate the work site. Use a maintenance work light when working under or inside the machine. • Always use a work light protected with a guard. In case the light bulb is broken, spilled fuel, oil, antifreeze fluid, or window washer fluid may catch fire. • When the floor tilt mechanism check and/or maintenance is conducted, the operator’s station is tilted upward. Before conducting maintenance work, refer to page 7-74 on this manual for the detailed operation procedures and correctly operate the machine. • When required to work under the floor, support the raised operator’s station with the fall prevention bars (red color) to ensure safety. • When the inspection/maintenance work is complete, tilt the operator’s station downward after housing the fall prevention bars. Be sure to slowly lower the operator’s station at the time. Failure to remove the supporters such as wooden blocks may damage the tilt mechanism. WARN OTHERS OF SERVICE WORK • Unexpected machine movement can cause serious injury. • Before performing any work on the machine, attach a “Do Not Operate” tag in an easy-to-see place such as on the cab door or control lever. • Never attempt to operate the machine with a “Do Not Operate” tag attached. • Make it a rule for the inspection/service person to hold the engine start key during inspection/service work. S-22 SA-037 M1M0-07-032 SA-287

SUPPORT MACHINE PROPERLY SAFETY • Never attempt to work on the machine without securing the machine first. • Always lower the attachment to the ground before you work on the machine. • If you must work on a lifted machine or attachment, securely support the machine or attachment with stays or blocks strong enough to support the machine and/or attachment weight. STAY CLEAR OF MOVING PARTS • Contact with moving parts can cause serious injury or death due to amputation or entanglement. • To prevent accidents, care should be taken to ensure that hands, feet, clothing, jewelry and hair do not become entangled when working around rotating parts. PREVENT PARTS FROM FLYING • Grease in the track adjuster is under high pressure. Failure to follow the precautions below may result in serious injury, blindness, or death. • Do not attempt to remove GREASE FITTINGS or VALVE ASSEMBLIES. • As pieces of parts may fly off, be sure to keep body and face away from the valve. • Never attempt to disassemble the track adjuster. Inadvertent disassembling of the track adjuster may cause the parts such as a spring to fly off, possibly resulting in severe personal injury or death. • Travel reduction gears are under pressure. • As pieces of parts may fly off, be sure to keep body and face away from AIR RELEASE PLUG to avoid injury. • GEAR OIL is hot just after operation. Wait for gear oil to cool, then gradually loosen the air release plug to release pressure. S-23 SA-527 SA-026 SA-344

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
Get inspired by - Green Design Plant Hire
3. Fusarium mycotoxins in cereals - Plant Research International ...
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
ALR 900 | AVR 1100 - PSM PLANT & TOOL HIRE CENTRES LTD
15. LOADERS - CPHA - Contractors Plant Hire Association
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Construction Plant World - 28th June 2018
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited