5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire


PREVENT FIRES Check for Oil Leaks: • Fuel, hydraulic oil and lubricant leaks can lead to fires, possibly resulting in personal injury or death. SAFETY • Check for missing or loose clamps, kinked hoses, lines or hoses that rub against each other, damage to the oil-cooler, and loose oil-cooler flange bolts, for oil leaks. • Tighten, repair or replace any missing, loose or damaged clamps, lines, hoses, oil-cooler and oil-cooler flange bolts. • Do not bend or strike high-pressure lines. • Never install bent or damaged lines, pipes or hoses. Check for Shorts: • Short circuits can cause fires. • Clean and tighten all electrical connections. • Check before each shift or after eight (8) to ten (10) hours operation for loose, kinked, hardened or frayed electrical cables and wires. • Check before each shift or after eight (8) to ten (10) hours operation for missing or damaged terminal caps. • DO NOT OPERATE MACHINE if cable or wires are loose, kinked, etc. S-26 SA-019

Precautions for Handling Flammables • Spilled fuel and oil, and trash, grease, debris, accumulated coal dust, and other flammables may cause fires. SAFETY • Prevent fires by inspecting and cleaning the machine daily, and by removing spilled or accumulated flammables immediately. • Do not store flammable fluid near open flames. • Do not burn or crush a pressurerized container. • Do not store oily cloths. They are liable to catch fire. • Do not wind easy-to-absorb-oil asbestos or glass wool around high-temperature parts such as a muffler or exhaust pipe. Check Heat Shield Covers around Engine Compartment • If the engine compartment heat shield cover becomes broken or lost, fire may break out. • If the engine compartment heat shield cover becomes broken or lost, repair or replace it before operating the machine. Check Key Switch: • If fire breaks out, failure to stop the engine will escalate the fire, hampering fire fighting. • Always check key switch function before operating the machine every day: 1) Start the engine and run it at slow idle. 2) Turn the key switch to the OFF position to confirm that the engine hasstopped. If any abnormalities are found, be sure to repair them before operating the machine. S-27

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Get inspired by - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
3. Fusarium mycotoxins in cereals - Plant Research International ...
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Construction Plant World - 28th June 2018
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited