Views
5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

KEY SWITCH 1- OFF

KEY SWITCH 1- OFF (Engine OFF) 2- ON (Engine ON) 3- START (Engine Start) 4- HEAT (Engine Preheat) SWITCH PANEL OPERATOR’S STATION 5- Work Light Switch Press the top side of switch (5) to turn work lights (10) located on the boom and cab roof front ON. Press the bottom side of switch (5) to turn work lights (10) OFF. 6- Travel Mode Switch Press the rabbit-mark side of switch (6) to select the fast travel mode. However, when the travel load becomes heavy, the slow travel mode will automatically be selected. Press the turtle-mark side of switch (6) to select the slow travel mode. 7- Wiper Switch Three-operation positions are provided on this switch. OFF: Both the wiper and washer do not operate. Center: The wiper operates. WASHER: The washer operates together with the wiper. 8- Auxiliary Flow Control Switch (Optional) The hydraulic oil flow in the auxiliary pipe line can be controlled. 9- Power Mode Switch Two engine speed modes, E and P modes, are selected by operating the power mode switch. • E (Economy) Mode Although production is slightly reduced more than in the P mode, the fuel consumption and noise levels are reduced, allowing the machine to operate efficiently. • P Mode Use the P mode when general digging work is needed. 1-4 10 2, 4 1 3 6 5 7 9 8 M1M0-01-014 M1M0-05-002 M1M0-01-011

MONITOR PANEL 1- Coolant Temperature Gauge 2- Fuel Gauge 3- Liquid Crystal Display (Hour Meter, etc) 4- Set Switch 5- Display Control Switch 6- Auto-Idle Indicator 7- Auto-Idle Switch 8- Fast Travel Mode Indicator 9- Preheat Indicator 10- Alternator Indicator 11- Fuel Level Indicator 12- Overheat Indicator 13- Engine Oil Pressure Indicator 14- System Failure Indicator Coolant Temperature Gauge The gauge segment position indicates the engine coolant temperature. When the first three segments come ON, the coolant temperature is normal. NOTE: When the coolant temperature is lower than 20°C, the first segment will flash. OPERATOR’S STATION Fuel Gauge The gauge segment position indicates the fuel level. Refill the fuel before only the E-marked segment comes ON. NOTE: Even though the key switch is OFF, when the display control switch is continuously pressed for more than 0.5 seconds, the fuel level is displayed. As long as the display control switch is kept pressed, the gauge indicates the fuel level. When the switch is released, the gauge stops indication the fuel level. IMPORTANT: In case all segments flash, the machine is abnormal. Immediately, contact your authorized dealer. 1-5 14 13 12 11 10 9 8 1 2 3 4 5 6 7 M1M7-01-028 M1SM-05-008 M1SM-01-003

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Get inspired by - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
3. Fusarium mycotoxins in cereals - Plant Research International ...
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
ALR 900 | AVR 1100 - PSM PLANT & TOOL HIRE CENTRES LTD
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Construction Plant World - 28th June 2018
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited