OPERATOR’S STATION System Failure Indicator The system failure indicator comes ON or flashes an abnormality may be present in the engine control system. If the system failure indicator comes ON or flashes, immediately contact your authorized dealer for repair. Engine Oil Pressure Indicator The red indicator will light when the engine oil pressure is low. If the red indicator comes ON, the engine oil pressure warning buzzer will sound at the same time. Immediately stop the engine. Check the engine oil pressure system and the oil level for any abnormality. Overheat Indicator If the coolant temperature rises extremely high, this indicator operates. If the red light comes ON, the buzzer sounds at the same time. Immediately stop machine operation and reduce engine speed to the slow idle speed to lower the coolant temperature. Fuel Level Indicator When the fuel level indicator comes ON while the machine is operating on level ground, the remaining fuel amount in the fuel tank is 10 litters. Refill the fuel as soon as possible. 1-6 M1M7-01-008 M178-01-037 M178-01-036 M178-01-034
OPERATOR’S STATION Alternator Indicator The red indicator will light when low alternator output is present. Check the electrical system such as the alternator and/or battery system. Preheat Indicator The machine will automatically check if preheating is required or not. When preheating is required, preheat indicator is lit. NOTE: Preheating adopts the suction air heater system. Fast Travel Mode Indicator When the rabbit-mark (fast mode) side of the travel mode switch on the switch panel is pressed, the indicator comes ON. 1-7 M178-01-038 M178-01-041 M1M7-01-022
Launched in 1980, Construction Plant World Journal is published every two weeks, read by a worldwide audience of buyers and sellers of construction plant and equipment industries.
In conjuction with www.ConstructionPlantWorld.com, we offer sellers the most comprehensive, effective and easy to use solution to reach potential buyers globally.