5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire


STOPPING THE ENGINE Stop the engine following the steps below. OPERATING THE ENGINE 1. Before stopping the engine, lower the bucket and blade to the ground unless specified. 2. Return the engine control dial or the engine control lever to the slow idle position and keep the engine running at slow idle speed for 5 minutes. 3. Turn key switch (2) OFF to stop the engine. 4. Pull up pilot control shut-off lever (1) to the LOCK position. 3-6 1 2 M588-01-012 M1M0-03-001

TRAVEL LEVERS AND PEDALS DRIVING THE MACHINE Travel operation can be performed with either the levers or pedals. WARNING: In the standard traveling position, the front idlers are located in front of the operator’s seat and the travel motors at the rear. If the travel motors are positioned at the front of the machine, when the travel levers or pedals are operated in the direction as illustrated on the operation decals, the travel direction of the machine will be reversed. Be sure to confirm the position of the travel motors before traveling. NOTE: Travel lever dampers are provided for smooth control. In extremely cold weather (lower than -20° C), the travel lever (or pedal) will become heavy to operate. This is caused by increase in oil viscosity which is not abnormal. • Forward/Reverse Travel Move both levers (or pedals) forward together to travel forward. Pull the levers (or pedals) back together to travel in reverse. The travel speed can be controlled by adjusting the lever (or pedal) operating stroke. • Ascending/Descending Slopes The machine gradeability is 30° (58%). Slowly operate the travel levers (or pedals) when descending a slope. When the travel levers are placed in neutral, the travel brakes are automatically applied to stop the machine. NOTE: The travel pedal on this machine is a folding type. When traveling the machine using the travel pedals, unfold the pedals. 4-1 Operator’s Seat Left Front Rear Blade Right Forward/Reverse Travel Direction Travel Motor M571-01-001 M1LA-04-001 M1M7-04-011 M104-04-003 M1M7-04-010

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Get inspired by - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
3. Fusarium mycotoxins in cereals - Plant Research International ...
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Construction Plant World - 28th June 2018
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited