RE10TC Temperature Control Module Operating manual

Buffer Memory Buffer memory list
BFM#
(decimal)
280
Meaning Set range Unit Default value Description
Controller 1
281 Controller 2
282 Controller 3
283 Controller 4
284
285
Delay for sensor
monitoring
Controller 5
Controller 6
0 to 30 Minutes 0 Chapter 3.3.9
286 Controller 7
287 Controller 8
288 Controller 9
289 Controller 10
290 Leading value: Proportional band 0 to 500 0.1 72
291 Leading value: Integral time 0 to 1000 100 ms 600 Chapter 3.3.10
292 Leading value: Derivative time 0 to 1000 100 ms 118
293
294
Switching threshold for changing
between lead value and regular PID
constants
Controller 1
295 Controller 2
296 Controller 3
297 Controller 4
298
299
Heating currents
Controller 5
Controller 6
300 Controller 7
301 Controller 8
302 Controller 9
303 Controller 10
MITSUBISHI ELECTRIC 3 - 9
0 to 1000 0.1 K 70 Chapter 3.3.11
0 to 10000 0.01 V 0
304 Maximum leakage current 0 to 10000 0.01 V 0
305
Controller 1
306 Controller 2
307 Controller 3
308 Controller 4
309
310
Cooling constant
Controller 5
Controller 6
311 Controller 7
312 Controller 8
313 Controller 9
314 Controller 10
Tab. 3-9: Buffer memory areas for set values (5)
Setting of a min.
heating current.
If the measured
value of the heating
current is
less than the
min. current, an
alarm is issued.
The maximum
leakage current
is the current
which may flow
when all the
heating zones
are switched off
0 to 500 0.1 180 Chapter 3.3.128