Views
5 years ago

RIMA SYSTEM

RIMA SYSTEM

RIMA

RIMA SYSTEM LaserCounter.Operation_v4.doc RIMA Digital CMOS Laser Sensor Operational Instructions � Sensor head: � Sensor amplifier: NOTE: detecting range is from 20 to 45mm � Sensor mounting position � Adjusting for product thickness and/or uneven surface � The pre-set threshold value of the unit is 4. it should work fine for all types of product thickness and speed. � Use the [UP] or [DOWN] arrow buttons to fine tune the setting value (green numbers). � By increasing the setting value (green numbers), we effectively decrease the sensitivity of the sensor. This means that small edges or surface irregularities would be ignored (would not trigger and output response). � A good way to start fine-tuning is to bring the setting value all the down to 1 or 2. Then start increasing it until there are no more false positive outputs. � Adjusting for non-spine leading product, stream speed and product spacing � The response time would directly affect the sensitivity of the sensor, since it represents the time needed for the sensor to establish the presence of an edge. 1

AV Brochure - System Sensor Canada
TMS 9000 Series Torque Measurement System - Intertechnology Inc.
Lighting management systems
Sieger System 57 - Detection & Measurement Systems
MODULUS - PCE UPS Systems
Candulor Denture System
November 2012 - Arrow Transportation Systems Inc
6 - SAE IT-systems GmbH & Co. KG
Integrated Optical and Electronic Sensor Systems
Tank Content & Draught Measuring System
FLAME MONITORING SYSTEM
DYNAMIC DIGITAL SIGNAGE and INFORMATION SYSTEMS
The Storage System STOPACOMPACT
Six Shooter Systems - Oceaneering
Medical Applications - Arrow Electronics
Racial Purity and Dangerous Bodies: Moral Pollution, Black Lives, and the Struggle for Justice (Rima L. Vesely-Flad)
Unmanned Aircraft Systems Roadmap 2005-2030 - Federation of ...
SBS Product Brochure - Dynamic Balance Systems
Industrial IT System 800xA Brochure