Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Mould

VISI Mould Cooling Channel Layout

Objectives VISI Mould - Cooling Channel Layout At this stage of the mould development it is time to design the cooling channel layout. For this task we will use a pre designed configuration that we can apply using the Simple Cooling concept which will turn a layout of simple segments into a solidified cooling circuit with hose connectors and o-rings. For this task we will begin with a much more complete tool design which contains the majority of the components and it is required to load the starter file as detailed below. Do not worry if you have not managed to complete the previous training exercises as the starter file will bring you right up to the correct point for this section. Loading the File Lets begin by opening the file required for this tutorial. Select the File | Open command and select cooling-start.wkf Vcamtech Co., Ltd 1

YT-1200 - YOUNG TECH Co., Ltd.