Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Add 4 x ‘O’ rings to

Add 4 x ‘O’ rings to the vertical channels as shown below: - Note: - Apply the ‘O’ rings to the lower vertical channels. Finally add the Plugs to the open ends of the remaining Channels. VISI Mould - Cooling Channel Layout Vcamtech Co., Ltd 14

Now activate all the layers on the model Subtracting the Channels VISI Mould - Cooling Channel Layout The last task we need to perform is to subtract all the cooling channels from the model to create actual holes. To do this, follow the next steps: - Apply the subtraction on all the solids in the model. Cooling holes removed from solid. Click twice on this icon to Reset the layer list, making all layers active. Select All. This will detect all the cavities to be removed. With the cooling circuits completed the next stage is to make some 2D drawings and details of the tool. Vcamtech Co., Ltd 15