Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Mould - Creating

VISI Mould - Creating Mould Tool Documentation This is what Page 1 might look like after creating the views on an A0 page format. Now create a plan view of the Moving Half of the tool assembly on Page 2 Make sure the moving half group is activated. Activate Page 2 from the plot view manager. The moving half group contains all the layers relevant for the moving half. Access this from the Options tab. Vcamtech Co., Ltd 4

VISI Mould - Creating Mould Tool Documentation Now make the top view in the normal way and place the section as shown below. Plan View Of Moving Half and Required Section Try and make a section similar to that shown on the left. This section passes through a core pin and lifter. Suggested parameters for the section Vcamtech Co., Ltd 5