Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Lets remove items 62 –

Lets remove items 62 – 64 from the parts list as follows. VISI Mould - Creating Mould Tool Documentation We will begin numbering the parts list focusing on one family at a time. Lets begin with the Mould Base family. Follow the next example to see how this is done. Take a look at the parts list, items 1 – 12 represent the Mould Base family and are the only ones displayed. Lets assign position numbers and then re-arrange the order of the Mould Base family. LMB Click into Item 1 then click RMB and select the option Assign position. From the Assembly Manager tree, uncheck the items as shown opposite. They will subsequently be removed from the parts list. From the Assembly Manager tree, make sure that the Mould Base family is the only one checked in the list. You should have a result similar to that shown below for the clamping plate. Assign a Position No.1 to the Bottom Clamping plate. Vcamtech Co., Ltd 14

VISI Mould - Creating Mould Tool Documentation Now repeat the task for all the items in the Mould Base family. Please make sure the numbers are assigned as follows: - Click on the Position column header as highlighted below to order the list in numerical order. The next family that we will number is the Insert family. Using the same method as previously described, number the family as follows: - Make sure Inserts is the only family checked. The numbering sequence (13-16) is shown below and follows on from the Mould Base family no’s The next family that we will number is the Lifters family, please number the family as follows: - The numbering sequence (17-23) is shown below and follows on from the Insert family no’s Vcamtech Co., Ltd 15

YT-1200 - YOUNG TECH Co., Ltd.