Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Modelling – Draft

VISI Modelling – Draft Analysis In this example the system will highlight yellow and blue arrows on 3 of the 4 edges. This indicates that along three of the edges, there are conditions that exceed the accptable smooth condition. Non-Smooth edge We will now re-build the problem face, check the smoothness of the new face and validate the ‘flow’ using the Iscoline rendering. Exit the ‘Check Edges’ panel. Modelling > Delete \ Detach faces Select the face to delete – Select face 1 (F1) F1 Non-Smooth edge Ensure that the ‘Delete’ option is set Non-Smooth edge Smooth edge Vcamtech Co., Ltd 13

VISI Modelling – Draft Analysis Using this function, we will remove the single face from the solid model (automatically converting it to a knitted surface body). It is then a simple case of creating the replacement surface and re-uniting it to the master model to recreate the solid body. Solid > Other Surfaces > Patch Surfaces Select the edges to create the patch surface (i) Select the first edge – Select Edge 1 (E1) (ii) Select the first edge – Select Edge 2 (E2) (iii) Select the first edge – Select Edge 3 (E3) (iv) Select the first edge – Select Edge 4 (E4) E2 E3 Operation > Unite To re-create our solid body it is necessary to unite our new patch surface to the existing knitted body. Select the target body – Select the ORANGE knitted surface body E4 E1 Select sheet body – Select the new patch surface body (Accept the default knitting parameters) Result of the patch Vcamtech Co., Ltd 14

YT-1200 - YOUNG TECH Co., Ltd.