Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Analysis >

Analysis > Compare Select the first body - Select PART1 (the original solid model – light green) VISI Modelling – Core Modification Select the body to compare - Select PART2 (the revision solid model – pale yellow) NOTE ! The comparison tolerance value can be changed from inside the compare control panel. The following interface will be displayed : Select the ‘Update Graphics’ icon. to quickly identify the part modification Vcamtech Co., Ltd 3

VISI Modelling – Core Modification The slider bar can be used to modify the transparency of the first and second component. If you switch OFF the ‘show common faces’ option only the faces that have changed will be displayed. Select the ‘Apply’ icon Using the slider bar we can see that on the new part revision, the diameter of the internal diameter has been modified. Selecting the ‘Apply’ icon will retain the colours of the comparison faces. In this case blue faces will be created on the original model and yellow faces will be created on the revision model. With the comparison faces a different colour from the rest of the model, we can use the ‘Analyse Face Colour’ option to automatically separate the modified faces. Vcamtech Co., Ltd 4

YT-1200 - YOUNG TECH Co., Ltd.