Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Mould - Tool Build

VISI Mould - Tool Build Tutorial Notice how the system automatically picks the most suitable plate size in the range (246_346) and the gap between the cavity and core plate is created in preview mode. Plate key size based on the clearance values 10mm and 30mm. Configuring the plate layout Now that we have the correct mould base key size, the next task is to configure the mould plates to the correct size and type. Delete the Insulation Plate from the configuration, Injection side. Select the Z121BLSD from the tree and click with the Right Mouse Button to see the pop up options. Pick the option Delete Plate from the list. Click Yes to confirm removal of the plate. 20mm gap now applied between core and cavity plates. Insulation Plate will be removed Vcamtech Co., Ltd 4

Delete the Insulation Plate from the configuration, Ejection side. Select the Z121BLSD from the tree and click with the Right Mouse Button to see the pop up options. Pick the option Delete Plate from the list. Click Yes to confirm removal of the plate. VISI Mould - Tool Build Tutorial Now that we have the desired plate layout it is time to set the thickness for the plates on both Injection and Ejection sides of the tool. Set the plate sizes for the Injection side of the tool Select the ‘K20’ plate in the treeview Click Here The bottom window updates to show the following. We will now change the Z dimension to update the plate thickness. 246 Double Click Here In the Z Dimension box Vcamtech Co., Ltd 5

YT-1200 - YOUNG TECH Co., Ltd.