Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI-Mould Inserting

VISI-Mould Inserting Standard Elements

Objectives VISI Mould - Tool Build Tutorial Now that we have created the mould bolster configuration and the default standard elements, it is time to start inserting Standard Element components from the supplier catalogues. For this task we will begin from the last completed stage of the training and it is required to load the starter file as detailed below. Do not worry if you have not managed to complete the previous training exercises as the starter file will bring you right up to the correct point for this section. Loading the File Lets begin by opening the file required for this tutorial. Select the File | Open command and select plates&stdelem.wkf Vcamtech Co., Ltd 1