Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Screwing the Inserts to

Screwing the Inserts to the K20 plates VISI Mould - Tool Build Tutorial Our next task is to screw the Fixed Half Insert and the Moving Half Insert into their respective K20 bolster plates Set the Layer list to display only the 4 layers shown Follow the next sequence to add the screws: - You will now be presented with the lower docked dialog screen for catalogue / component choice. Pick on the “Suppliers” icon and select “Hasco” from the available pop-up list. Make sure the CAV layer is the current layer. Select Standard Element from the Mould drop down Now select the “Fixing” tab to display the list of fixing components, as shown below. Vcamtech Co., Ltd 4

Select the Z30 screw from the Fixing menu. You will now be presented with the ‘Element Data’ dialogue box. This is the area where the parameters can be set for each component in the library. It will appear in active until you pick a start and end plate for component insertion. You must select a Start Plate and End Plate as shown below. Now select the Start Plate and End Plate as shown below VISI Mould - Tool Build Tutorial 1.Select Start Plate K20 fixed half. 2.Select End Plate Fixed Half Insert Vcamtech Co., Ltd 5

YT-1200 - YOUNG TECH Co., Ltd.