Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Next select the

Next select the Application Point 3. Application Point can be any one of the Fixed Half insert’s corner rads. Use the centre snap icon to snap to the radius corner. Note: - It is possible that you may not see a preview of the screw because it has been inserted on the Standard layer which is not currently visible.In the next step we will fix this situation. Now adjust the parameters for the Z30 element as shown below. Preview of Screw Change the Layer drop down menu to ‘CAV, to apply the components to this layer. Change the ‘Diameter’ parameter to 6mm Once you have set the parameters click the Add Instance button to insert the element into the model (it is no longer a preview). Select the Add Instance button. VISI Mould - Tool Build Tutorial Vcamtech Co., Ltd 6

VISI Mould - Tool Build Tutorial You now have a chance to insert extra instances of the same component because the Apply checkbox is flagged in the Element Data window. Please press the ESC key to cancel the insertion of extra instances as we will insert these in a different way. Now insert 3 more screws to the remaining corner positions. This can be done using the main Edit menu in the CAD or from the Edit Elements area. Select the Z30 screw. Pick the No option because the start / end plate thickness are the same. Screw is Mirrored to the 3 new positions to secure the insert. Pick the Mirror option from the Edit drop down menu. The Apply button is checked, meaning extra instances can be inserted after the first instance is added. From the Left Hand side Menu select the ‘2 Direction’ icon to mirror the screws to the other 3 corner positions. Select the coordinate position that represents the tool centre. Rebuild: - Because we are transforming the standard elements to different positions the system will ask if we need to rebuild the Elements to suit the new locations. Vcamtech Co., Ltd 7