vero uk training material - VCAM TECH Co., Ltd

Objectives
VISI Mould - Inserting Lifters
Having now inserted some basic standard components we will move onto the automatic
creation of Lifters. The lifters are required to help mould the undercut features on the
product such as clips and slots that may be difficult to form with any other method.
For this task we will begin from the last completed stage of the training and it is required to
load the starter file as detailed below. Do not worry if you have not managed to complete
the previous training exercises as the starter file will bring you right up to the correct point
for this section.
Loading the File
Lets begin by opening the file required for this tutorial.
Select the File | Open command and select lifter-start.wkf
Vcamtech Co., Ltd 1