Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Select the Start face

Select the Start face for the lifter. 2.Use the SPACE BAR to toggle the fixing face, select the face shown opposite. Now select the End Face for the lifter 3.Select the lower ejector plate bottom face for lifter insertion. Next pick the insertion point for the lifter on the start face of the lifter head. Pick the predefined point using the point filter icon. VISI Mould - Inserting Lifters Vcamtech Co., Ltd 4

Next select the stroke direction for the lifter. Select the Y axis direction. Reverse axis direction to match that shown opposite. Use RMB to confirm. Finally select the Cavity plate that will house the clearance cavity for the lifter. Now enter the lifter parameters as shown opposite. VISI Mould - Inserting Lifters Pick the K20 core plate as the cavity slot insertion plate. Vcamtech Co., Ltd 5