Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Modelling – Draft

VISI Modelling – Draft Analysis IMPORTANT : For this example, it is necessary to switch off the ‘Angles evenly spaced’ option so that we can manually define our own angle ranges. Set the angle values to match the dialogue box displayed. Switch off this After defining the angle values select the ‘Update Graphics’ icon. If we look at the angle ranges defined inside the VISI-Analysis control panel we can see that any faces that are defined using a dark red colour fall between 0 and -1 degree draft. Any faces that are defined using a pink colour fall between -1 degree and -5 degrees of draft. Using this graphical representation, we can see that the 4 inner bosses are displayed dark red. This indicates that we will need to increase the draft angle for these features. Click on the ‘X’ to close Draft Analysis Vcamtech Co., Ltd 7

Modelling > Draft Faces Select reference edges - Select all 4 outer edges of the 4 inner bosses (E1) (confirm using RHM) Select Draft Faces - Select all 4 cylindrical faces of the 4 inner bosses (F1) (confirm using RHM) E1 VISI Modelling – Draft Analysis Vcamtech Co., Ltd 8 F1