Views
5 years ago

Docket 468-2006 - Montana Board of Oil and Gas

Docket 468-2006 - Montana Board of Oil and Gas

Docket

Docket 174-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., to pool all interests in the permanent spacing unit comprised of all of Sections 18 and 19, T26N-R55E, Richland County, Montana, on a surface acreage participation basis, for production of oil and associated natural gas from the Three Forks/Bakken Formation through the Peterson 1-18H well; and to authorize non-joinder penalties in accordance with Section 82-11-202(2), M.C.A. Docket 175-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., to pool all interests in the permanent spacing unit comprised of all of Sections 28 and 33, T26N-R55E, Richland County, Montana, on a surface acreage participation basis, for production of oil and associated natural gas from the Three Forks/Bakken Formation through the Calvin 1-33H well; and to authorize non-joinder penalties in accordance with Section 82-11-202(2), M.C.A. Docket 176-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 2 and 11, T25N-R55E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 177-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 4 and 9, T25N-R55E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 178-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 8 and 17, T26N-R53E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. 14

Docket 179-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 6 and 7, T26N-R54E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 180-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 13 and 24, T26N-R54E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 181-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 14 and 23, T26N-R54E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 182-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the overlapping permanent spacing unit comprised of Sections 21 and 28, T26N-R54E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. Docket 183-2012 APPLICANT: CONTINENTAL RESOURCES, INC. - RICHLAND COUNTY, MONTANA Upon the application of Continental Resources, Inc., for authorization to drill up to three additional Bakken/Three Forks Formation horizontal wells in the permanent spacing unit comprised of Sections 18 and 19, T26N-R55E, Richland County, Montana, said wells to be located no closer than 200’ (heel/toe setback) and 500’ (lateral setback) to the boundaries of said spacing unit. Applicant requests placement on the Default Docket. 15

TechAppendix - Montana Board of Oil and Gas
Docket 468-2006 - Montana Board of Oil and Gas
STATE OF MONTANA - Montana Board of Oil and Gas
2006 Annual Review - Montana Board of Oil and Gas
May2009Orders - Montana Board of Oil and Gas
2000 Annual Review - Montana Board of Oil and Gas
2004 Annual Review - Montana Board of Oil and Gas
2005 Annual Review - Montana Board of Oil and Gas
2009 Annual Review - Montana Board of Oil and Gas
Minutes - Montana Board of Oil and Gas
2 columns - Montana Board of Oil and Gas
2008 Oil and Gas Update for Montana