Views
5 years ago

SARGENT® - Dugmore.com

SARGENT® - Dugmore.com

SARGENT ® 11-Line

SARGENT ® 11-Line T-Zone Lever Locksets How to order (888) DUGMORE 888.384.6673 The SARGENT T-Zone* sets a higher standard for Grade 1 bored-in locks. The unique T-Zone construction provides unequalled strength and durability for the most demanding applications like schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch. Solid cast levers Accommodates doors 1-3/4" (44mm) to 2" (51mm) thick and 2-1/4" (57mm) to 2-1/2" (64mm) thick Construction – Interlocking construction between lockbody and latch Lockbody – Cast/machined stainless steel Seamless brass tube Many functions are easily field changeable Simple cylinder removal Small 2-3/4" (70mm) dia. rose Security screw Only 45° of lever rotation to retract latch Multiple Key Systems available Direct linkage with fixed alignment between the hub and the latch is the best construction for quietly and effectively operating the latch. For this reason, SARGENT has developed the interlocking aligning and latch tubes, which form a rugged torque resistant “T” in the critical twist area. This “T-Zone” construction, combined with long lasting components, makes T-Zone Lever locks outstanding! Strength and Durability • Unequaled strength and durability • Withstands 3-1/2 times ANSI/BHMA A156.2 Grade 1 torque force on a locked lever. Over 3,000 in/lbs! • Exceeds 10 times ANSI/BHMA A156.2 Grade 1 standard for cycle testing. Over 8 million cycles with virtually no lever sag! • Non-handed field reversible • Fits on minimum stiles 4-1/4" (108mm) (B and O roses) and 4-1/2" (114mm) (E and L roses) Torque values greatly increased by a stainless steel bearing that provides stops for the heat treated lever locking piece • 10 year limited warranty - no service required to maintain warranty 28 Convenience • Finishes: 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D & split finish • Fits both 160 & 161 door preps. No through-bolts required • Fewer parts for easier installation • Only 45 degrees of lever rotation required to retract latch • 4 Solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements Security • UL and cUL fire door Listed, conforms to UL10C and UBC7-2 (1997) • High security lever attachment available for applications subject to severe vandalism • Resists vandalism • Torx® and spanner screws • Classroom security function available • Security key systems available (V-10, Signature, Keso F1, Keso, XC) Prefix Series/Guarded/Function 11G05 OL 26D Rose/Lever Applications • High traffic areas – offices, public buildings, and hospitals • High abuse areas – institutions, schools, retail • Any door that requires the contemporary look of a small rose and durability that exceeds Grade 1 standards Innovation • SARGENT’s revolutionary SARGuard available • Patented “T-Zone” construction with true interlocking between the lockbody and the latch 201 Fax: 888.329.3846 www.dugmore.com sales@dugmore.com Finish Available with the antimicrobial finish. Learn more on page 4

(888) DUGMORE 888.384.6673 11-Line T-Zone Lever Lockset Trims and Functions Fax: 888.329.3846 OL O-Rose L-Lever LJ BP EB Storeroom or Closet (04) Latch from outside by key, inside by lever. Outside lever is rigid at all times. Deadlocking latch. Entrance or Office (05) Latch by either lever unless O/S lever is locked by push/ turn button in I/S lever. Push button released by key O/S or lever I/S.Turn button must be manually released. Key retracts latch when O/S lever is locked. Deadlocking latch. Exit (13) Deadlocking latch. Latch by inside lever. Outside lever rigid at all times. Passage (15) Latch by both levers at all times. Exit or Twin Communicating (15-3) Deadlocking latch. Blank rose outside. Latch by lever inside. Minimum clearance of 1-1/8" on single doors and 2-1/4" between double doors. Classroom Security, Apartment, Exit, Privacy (16) Deadlocking latch. Latch by either lever unless outside lever is locked by key in inside lever. Key in outside lever retracts latch when outside lever is locked. Inside lever always operative. Utility, Asylum or Institutional (17) Deadlocking latch. Both levers rigid at all times. Latch by key either side. Use only on rooms with more than one exit. Entrance or Office (24) Deadlocking latch. Latch by either lever unless outside lever is locked by push button in inside lever. Push button released by key or turning inside lever. Closing door does not unlock outside lever or release button. Key in outside lever retracts latch when outside lever is locked and releases inside push button. Communicating (30) Deadlocking latch. Latch by either lever. Key in either lever locks or unlocks its own lever only. Use only on rooms with more than one exit Classroom (37) Deadlocking latch. Latch by either lever unless outside lever is locked by key. Key in outside lever locks or unlocks outside lever and retracts latch. Inside lever always operative. Classroom Security (38) Deadlocking latch. Latch by either lever unless outside lever is locked by key. Key in either lever locks or unlocks out side lever. Inside lever always operable. Locked indication on inside rose standard with this function. Service Station (44) Deadlocking latch. Latch by either lever unless outside lever is locked by push button in inside lever. Key retracts latch when outside lever is locked. Push button released by turning inside lever, closing door, or by key in outside lever unless push button is fixed in locked position by turning coin slot in inside lever. Slotted inside button must be manually released. Hotel, Dormitory or Apartment (50) Deadlocking latch. Latch by key outside and lever inside. Outside lever always rigid. Depressing push button when door is closed shuts out all keys except emergency key and projects visual occupancy indicator in cylinder face. Push button released by turning inside lever automatically reactivating all keys and retracting visual occupancy indicator. Lock out key fixes push button in locked position, shutting out all keys except emergency. Push button fixed by lockout key must be released manually. Lock out key provided. Corridor, Dormitory (54) Deadlocking latch. Latch by either lever unless outside lever is locked by push button inside or key outside. Rotating inside lever or closing door releases button. Key outside locks or unlocks outside lever and releases inside button. Privacy/Bathroom (65) Deadlocking latch. Latch by either lever unless outside lever is locked by push button in inside lever. Turning inside lever or closing door releases button. Emergency button in outside lever unlocks, with use of a blade screwdriver in outside lever and releases inside button Hospital Privacy (68) Latch by either lever unless outside lever is locked by push button in inside lever. Turning inside lever or closing door releases button. Rotating thumbturn in outside lever unlocks the outside lever and releases the inside button. Single (93) & Double Lever Pulls (94) For wood or custom hollow metal doors. Lever and rose both sides joined by two through-bolts. Requires special door preparation. Double Lever Pull (94-2) For wood or custom hollow metal doors. Lever and rose both sides joined by two through-bolts. Dummy latch plate. Uses standard door prep template. 28 How to order Prefix Series/Guarded/Function 11G05 OL 26D Rose/Lever Finish www.dugmore.com sales@dugmore.com 202 SARGENT ®

7800/8200 Mortise Locks Functions - Sargent Locks
YM Series® and Residential Condensed Catalog - Dugmore.com
WIRELESS POSSIBILITIES - Sargent Locks
In Review: Nick Sargent | View the PDF - Sonya Clark
Sargent Profile Series v.N2 - Access Hardware Supply
SARGENT SE LP10-F FIPS Sell Sheet.pdf - Access Control ...
Lockdown Options for K-12 School - Chown Hardware
Residential Box Pack Price Book 72 - Top Notch Distributors, Inc.
“NM” SERIES - Cal-Royal
Residential - Top Notch Distributors, Inc.
Print Catalog Page - Cal-Royal
IDH MAX® & ELECTROMECHANICAL LOCKS - Best Access Systems
BASIS G catalog (Page 1) - DH Pace Company
SIMPLEX® Parts Price Book - Access Hardware Supply
Sargent 8200 Series.pdf - Access Hardware Supply
CYLINDERS & COMPONENTS - Dugmore.com