PFT Rotor/Stator D 7-2,5 neXt generation_en
- No tags were found...
Transform your PDFs into Flipbooks and boost your revenue!
Leverage SEO-optimized Flipbooks, powerful backlinks, and multimedia content to professionally showcase your products and significantly increase your reach.
D 7‒2.5 <strong>neXt</strong> <strong>g<strong>en</strong>eration</strong><br />
The next <strong>g<strong>en</strong>eration</strong> of <strong>PFT</strong> <strong>Rotor</strong>s and <strong>Stator</strong>s<br />
The optimized <strong>Stator</strong> D 7‒2.5 <strong>neXt</strong> <strong>g<strong>en</strong>eration</strong> for the „fast“ processor. With a delivery<br />
rate of 27 l/min and a grain size of up to 3 mm, the next <strong>g<strong>en</strong>eration</strong> integrates perfectly<br />
into the <strong>Rotor</strong>/<strong>Stator</strong> family.<br />
TECHNICAL INFORMATION<br />
<strong>Stator</strong> 00727738<br />
<strong>Rotor</strong> 00634586<br />
<strong>Rotor</strong> with tang 00704311<br />
TECHNICAL DATA<br />
Conveying output<br />
Conveying pressure<br />
Conveying distance<br />
Grain size<br />
<strong>Stator</strong> type<br />
Connection type<br />
Rubber hardness<br />
<strong>Stator</strong> - l<strong>en</strong>gth / Ø<br />
max. 27 l/min<br />
max. 30 bar<br />
max. 25 m<br />
max. 3 mm<br />
maint<strong>en</strong>ance-free<br />
D-pump<br />
hard<br />
273 mm / 90 mm<br />
ADVANTAGES AT A GLANCE<br />
• ideal for cem<strong>en</strong>t-based plasters<br />
• with anti-twist device (PIN) for greater safety<br />
• optimized conical geometry<br />
• better pressure build-up<br />
• optimum coordination betwe<strong>en</strong> <strong>Rotor</strong> and <strong>Stator</strong><br />
• 20 % more power than <strong>Rotor</strong>/<strong>Stator</strong> D 6‒3<br />
• highly wear resistant rubber compound<br />
• highly wear-resistant <strong>Rotor</strong><br />
made of hard chromium carbide cast iron<br />
V<br />
27 l/min<br />
<strong>PFT</strong> – ALWAYS AT YOUR SITE<br />
www.pft.net