Section 06 Custom Chrome Europe Catalog 2025

6

ELECTRICAL

EDITION 50

Quick Disconnect

893256 893257 893258 893259

893271 893272 893273 893274

Fork Terminal

893383

893263 893264

893278 893279

893384 893385 893386 893387 893388

6

893389 893390 893391 893392 893393

893394 893395 893396 893397 893398

Butt Splice

893260 893261 893262

893275 893276 893277

893399 893400 893401 893402 893403

Ring Terminal

893404 893405 893406 893407 893408

893265

893268

893280

893283

893266

893269

893281

893284

18-Gauge Wire on Spool

• On 100 Foot (30 meters) spools in 18

gauge (1.02 mm)

• Available in all OEM colors

893383 Black

893384 Black/Red Stripe

893385 Brown/Black Stripe

893386 Pink/White Stripe

893387 Brown

893388 Brown/White Stripe

893389 Red

893390 Red/Yellow Stripe

893391 Red/Blue Stripe

893392 Orange/Black Stripe

893393 Orange/White Stripe

893394 Yellow/Black Stripe

893395 Yellow

893396 Green/Blue Stripe

893397 Blue/Black Stripe

893398 Blue

893399 Violet/Black Stripe

893400 Violet

893401 Gray

893402 Gray/Green Stripe

893403 Gray/White Stripe

893404 White/Black Stripe

893405 White

893406 White/Brown Stripe

893407 White/Blue Stripe

893408 White/Violet Stripe

893267

Universal Connectors

• Available PVC fully insulated or heat shrinkable

• Pack of 25

22-18

WIRING (0.7-

1.2 MM)

16-14 12-10

WIRING WIRING

(1.6-2.0 MM) (2.6-3.2 MM)

PVC Male 893256 893257 N/A

PVC Female 893258 893259 N/A

Heat Sealable Male 893271 893272 N/A

Heat Sealable Female 893273 893274 N/A

PVC 893263 893264 N/A

Heat Sealable 893278 893279 N/A

PVC 893260 893261 893262

Heat Sealable 893275 893276 893277

#8 (4.1 mm) 893265 893268 N/A

#10 (4.8 mm) 893266 893269 N/A

#.25” (6,35 mm) 893267 893270 N/A

Heat Sealable, #8 (4.1 mm) 893280 893283 N/A

Heat Sealable, #10 (4.8 mm) 893281 893284 N/A

Heat Sealable, #.25” (6,35

mm)

893270

893282

893285

893282 893285 N/A

6.2

APPAREL

Stainless Steel

BEFORE

SEATS &

TOURING

FOOT

CONTROLS

AFTER

Copper

HAND

CONTROLS

Flex Braiding

• Best protection

• “Old School” look

• 25 foot roll

Copper

670032 1/2” ID max

Black Flex

893412 3/4” ID max

Black Flex

DEI Protect-A-Wire

For a clean look that protects critical wiring and hoses from

heat. The DEI Protect-A-Wire is great for preventing hardening,

cracking or shorting. Constructed from high temp resistant glass

fiber material. Heat treated & saturated with an acrylic binder to

provide stiffness and frey resistance. Capable of handling direct

heat up to 500°F. Fuel & chemical resistant. Use when installing

turn signals, stereos, license plate relocation, auxiliary lighting,

and GPS units or whatever wiring you may need to protect.

Includes Military spec shrink tubing. Available in three different

diameters. Made in the USA.

660830 Black 10 feet Protect-A-Wire 5mm wide

660831 Black 10 feet Protect-A-Wire 8mm wide

660832 Black 5 feet Protect-A-Wire 13 mm wide

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

893417 3/4” ID max

893373 1/4” ID max

Stainless Steel

893374 3/8” ID max

670030 1/2” ID max

670031 3/4” ID max

893375 1/2” ID max

893376 3/4” ID max

ENGINE

Brass Steel

893411 1/2” ID max

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Namz Clear Heat Shrink Tubing

• Made of durable PVC

• Used with braided lines to protect painted finishes

• Will not fade, turn yellow, or crack

• Shrinks to half of its original size

• Sold in 25 foot spools

Clear

Black

670033 1/4" I.D.

670034 5/16" I.D.

670035 3/8" I.D.

670036 1/2" I.D.

670037 3/4" I.D.

893382 3/32” I.D.

893381 3/16” I.D.

893379 1/8” I.D.

893378 1/4” I.D.

893380 3/8” I.D.

893377 1/2” I.D.

Black ‘Wrap-It’ Wiring Harness Sleeving by

Russell

Lightweight oversleeve used to bundle and protect cable

assemblies and wire harness from chaffing and cutting. The 360°

self-wrapping feature allows for quick, easy installation and

removal without tools. Sold in 25 foot rolls.

27018 1/2"-diameter

771991

771995

771987

Round It Wire Wrap

• Add protection and looks

• A wire can be added or joined to an existing harness with no

cutting or fishing necessary

• Sold in 6-foot lengths

• Black

771995 1/2”

771987 1/4”

771991 3/8”

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM

6.3

EDITION 50

918445

918447

Lighting Splice Connector

• Perfect when adding connections or repairing broken ones

• No tools needed!

• Easy to use

• Sold in 5pk

Unit: Pack , Qty.: 5

PART#

DESCRIPTION

918445 Straight „H“ Style 18-22 Gauge, Two-Wire to Two-

Wire

918447 „T“ Style 18-22 Gauge, Two-Wire to Two-Wire

6

918444

918446

918444 Straight „H“ Style 18-22 Gauge, Single Wire to Single

Wire

918446 „T“ Style 18-22 Gauge, Single Wire to Single Wire

918465

918467

Butt Splice with Low Temperature Solder

Heat Shrinkable Butt Splice with Low Temperature Solder.


918466

PART#

DESCRIPTION

918465 0,3-0,8 mm²

918466 1,3-2,0 mm²

918467 3,3-5,3 mm²

670823

670826

670820

Deutsch DTM Series

Connectors

• For all HD 98-23 models

• For 14-23 (1.6-0.8 mm) gauge wire

Male Connectors

670821

670828

670826 2-Position (OEM 74102-98BK)

670024 3-Position (OEM 74103-98BK)

670827 4-Position (OEM 74104-98BK)

670828 6-Position (OEM 74106-98BK)

670827

670829 8-Position (OEM 74108-98BK)

670825 12-Position (OEM 74109-98BK)

Male Sockets

670825

670830 Stamped pins (100)

Female Connectors

670829

670820 2-Position (OEM 74112-98BK)

670023 3-Position (OEM 74113-98BK)

670821 4-Position (OEM 74114-98BK)

670822

670822 6-Position (OEM 74116-98BK)

670823 8-Position (OEM 74118-98BK)

670304 12-Position (OEM 74119-98BK)

Female Pins


670830

670824

Plug-off Pins

670042 Plug-off pins (10)

6.4

APPAREL

893126 893127

SEATS &

TOURING

670064 670070 670066 670072

893128 893129

FOOT

CONTROLS

893130 893131

HAND

CONTROLS

670063 670069 670065 670071

LIGHTING

670061 670067 670047 670053

Interface Seals

893126 2 Position

893127 3 Position

893128 4 Position

893129 6 Position

893130 8 Position

893131 12 Position

ELECTRICAL

EXHAUST

INTAKE

893124

893123

Deutsch OEM DT Series Connectors



Female Connectors

Male Connectors

893136

ENGINE

670061 2-Position, grey (OEM 72122-94GY)

670046 2-Position, black (OEM 72102-94BK)



GASKETS







893135

TRANNY &

CLUTCH







DRIVELINE









893134

WHEELS, TIRES

& BRAKES

Female Sockets

Male Pins

670074 Stamped sockets (100)

893124 Solid sockets (100)


893123 Solid pins (100)

Plug-off Pins

FRAMES

670025 Plug-off pins (10)

Deutsch DT-Series

Sealed Connectors

893134 4-Position Header

FORKS &

SHOCKS



SHEETMETAL

Throttle Control 6 Position Connector Kit includes terminals, wire seals

and TPA lock

Part#: 918471 , Fitment: 18-24 Softail, 17-24 Touring, 17-24 Trike , OEM #: 69201394 , Unit:

Kit , Qty.: 1

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.5

EDITION 50

893213 664145

893216

664152

664158

893214

664163

893217

893215

664146

670880

664153

664159 664147

664164

664154

6

664148 664160

664155 664165

664149

664161

664156 664166

664150 664162

664157 664167

664151

664168

664170

Molex MX-150 Series Connectors

OEM connectors replacement for Harley-Davidson 07-24

Female Connectors

893213 2-Position, black (OEM 69200271)



893214 3-Position, brown (OEM 72542-07BN)

893215 3-Position, green (OEM 75240-07GN)











Female Crimp Terminals

664168 Pins (100)

664169

Male Connectors

893216 2-Position, black (OEM 69200272)



893217 3-Position, brown (OEM 72542-07BN)

670880 3-Position, green (OEM 72534-07GN)










Male Crimp Terminals

664170 MX-150 Blade Cavity Plugs

664169 Pins (100)

Molex Connector

• Molex (2008-Up) 6-position female connector ,(single row) black. Throttle control actuator connector.

PART# FITMENT OEM #

897350 16-17 Softail, 08-16 Touring, 16-17 FXDLS with TBW 72483-08BK

6.6

APPAREL

670026

670027

670076

670028

670079

670029

AMP Multilock Connectors

These connectors (sold each) are typically used in lighting

applications. Fits stock models from 96-23

• 3-wire connector is used with stock headlight wire harness

• 6-wire connector is used with stock front turn signals

• 8-wire connector is used at the main wire harness to the rear

lighting harness

• 10-wire connector is used with indicator lights

Cap Connectors

670026 2-Position (OEM 73102-96BK)

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

670076 3-Position (OEM 73103-96BK)

670028 4-Position (OEM 73104-96BK)

LIGHTING

670077 6-Position (OEM 73106-96BK)

670077

670080

670043 8-Position (OEM 73108-96BK)

893137 10-Position (OEM 73110-96BK)

893138 12-Position (OEM 73112-96BK)

ELECTRICAL

Female Sockets

670043

670044

670083 Pins (100)

670027 2-Position (OEM 73152-96BK)

670079 3-Position (OEM 73153-96BK)

EXHAUST

670029 4-Position (OEM 73154-96BK)

670080 6-Position (OEM 73156-96BK)

INTAKE

670044 8-Position (OEM 73158-96BK)

893137

893139 10-Position (OEM 73160-96BK)

893139

893140 12-Position (OEM 73164-96BK

Plug Connectors

ENGINE

670082 Pins (100)

893138

893140

GASKETS

TRANNY &

CLUTCH

670083

670082

DRIVELINE

WHEELS, TIRES

& BRAKES

670848 670847 670850 670849

670851

670852

AMP Mini Multilock 040 Connectors

This connectors can be found on all HD Touring models located in

the fairing or used for heated grip wiring on models 08-24.

Cap Connectors

Plug Connectors

670848 2-Position (OEM

72902-01BK)


72904-01BK)

Female Sockets

670851 Pins (25)


72912-01BK)


72914-01BK)

Male Pins

670852 Pins (25)

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

Fuel Pump Connector

• NAMZ fuel pump/sender assembly connector kit (HD # 72485-

07) includes: Connector, terminals, wire seals, and TPA lock.

PART# OEM #

897349 72485-07

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.7

EDITION 50

670092

670086

893296

893297

893298

893295

893293 893292

670093

670087

MX-1900 Series Connectors

Introduced by the factory in 2011 on the 11-24 CAN-Bus models.

models, These are some of the smallest water tight connectors.

Fotment: 11-24 Softail, 14-20 Sportster, 12-17 Dyna, 14-24

Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24

FLTRX, 24 FLTRXSTSE), 14-24 Trike, 21-24 Sportster RH, 21-24

Pan America

893296 2-Position female (OEM 72906-11)

670094

670088

6

893295 2-Position male (OEM 72905-11)

893298 4-Position female (OEM 72908-11)


Pins

670095

670089

893293 Female crimp terminals (Pack 25), (OEM 72910-

11/69200308)

893292 Male crimp terminals (Pack 25), (OEM 72909-11)

670096

670090

MX-1900 Pin Housing

• MX-1900 4-position pin housing (OEM 69201180).

670097

670091

PART# OEM #

897351 69201180

897352 69201179

893142

893144

670843 670844

670831

670841

670838 670839

670832

670842

670099

670098

670836 670837

670845

Female Connectors


72043-71A)


72034-71)


72036-71)


70292-89)


72037-71)


70287-81)


70293-87)


72278-74)

Female Sockets

889098 Pins (100)

670846

670833

670834 670835

AMP Mate-N-Lock OEM Connectors



Male Connectors


72044-71A)


72035-71)


72040-71)


70291-89)


72041-71)


70288-81)


70305-87)


72276-74)

Male Pins

670855 Pins (100)

670840

AMP Mate-N-Lock Series Connectors

• Wire seal on both ends and between connectors


Cap with Wire Seals Plug with Wire Seals

670092 2-Position

670093 3-Position

670094 4-Position

670095 6-Position

670096 9-Position

670097 12-Position

893142 15-Position

Female Sockets

670099 Pins (100)

670086 2-Position

670087 3-Position

670088 4-Position

670089 6-Position

670090 9-Position

670091 12-Position

893144 15-Position

Male Pins

670098 Pins (100)

JST 6-Position Receptacle

• JST 6-position receptacle with wire seal.

PART# OEM # UNIT

897353 69201162 Each

6.8

APPAREL

JST 6-Position Tab

• JST 6-position tab with wire

seal.

PART# OEM # UNIT

897354 69201163 Each

893237

893236

893238

670868

1-Position Female Connector

893147 With wire seal and terminal, for

BCM Power Connector (OEM

72350-11) Fits 14-20 Sportster,

12-17 Dyna, 11-24 Softail, 14-24

Touring, 14-24 Trike

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

893300

LIGHTING

893301

670876

893239

670869

OEM Engine Temp Connector

893150 With terminals, for 95-06 models

(except Dyna 06), (OEM 72273-95)

ELECTRICAL

670878

893240

670870

EXHAUST

893302

893303

670866

670867

OEM Intake Air Temp Sensor

893151 With terminals, for 95-05 EFI

models (OEM 72247-95)

INTAKE

ENGINE

670875

670877

670879

893299

893241

Delphi Weather Pack

Environmentally sealed connection system made

to withstand exposure to extreme temperatures,

moisture and chemicals with superior performance.

Connectors with Seals

893236 1-Position male

893237 1-Position female






Pins and seals

670866 Male crimp terminals

(Pack 50)

670867 Female crimp

terminals (Pack

50)

893241 10 repl. wire

seals

OEM Throttle Position Sensor

Connector

893148 With terminals, for 95-05 models

(OEM 72280-95)

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

JST Series Connectors

• Super small and water tight

• For 22-26 (0.71-0.45 mm)

gauge wire only

Female Connectors


69200305)

893301 3-Position


769200306)

670878 8-Position

Female Crimp Terminals

670879 Pins (100) (OEM

69200307)

893302 2-Position

893303 3-Position

670875 4-Position

670877 8-Position

Male Crimp Terminals

893299 Pins (100)


Oil Pressure Switch Connector

PART# FITMENT OEM #

897348 99 FLHT, 99-06 FLHTCUI, 99-02,

08-09 FLTR, 99-02 FLTRI, 07-10,

12-16 FLHTCU, 07 FLHTCUSE2, 08

FLHTCUSE3, 09 FLHTCUSE4, 10

FLHTCUSE5, 10-16 FLHTK, 10, 13

FLTRX, 12 FLHTCUSE7, 13 FLHTCUSE8,

13 FLHTK ANV, 13, 16 FLTRU, 14-15

FLHTKSE, 15-16 FLHTKL, 15-16

FLTRXS, 11, 15-16 FLTRUSE, 11

FLHTCUSE6

72400-99

OEM Idle Speed Control

Actuator & Ignition Coil

Connector

893149 Idle speed control actuator for

models 95-05 and ignition coil

connector for models 02-05 (OEM

72263-95)

Brake Light Switch 1/8“

Female Crimp Terminal

1/8“ Female Crimp Terminal, 22-16 Gauge,

with heat shrink. Fits 1969 to 1981 brake

switches.

Part#: 918459 , Fitment: 69-81

Sportster, 71-81 FX Shovel, 69-81 FL

Shovel , OEM #: 9904 , Unit: Pack ,

Qty.: 10

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.9

EDITION 50

670863

893155

893146

893153

670045

6

670861

670864

Delphi EFI Connectors

Speed Sensor, Coil and Horn

670863 Speed sensor and alarm siren,

06-24 models (OEM 72064-06)

893155 Mate for CC# 670863

Throttle Position Sensor

670861 06-17 Dyna, 06-15 Softail, 06-07

Touring (OEM 72065-06)

893157 Mate for CC# 670861

Idle Speed Sensor, Ignition Coil and

Speed Sensors

670864 06-19 models (OEM 72066-06)

893156 Mate for CC# 670864

Map Sensor

893157

893156

670860

670860 04-06 Sportster, 98-03 XL1200S,

99-17 Dyna, except 16-17 FXDLS,

00-15 Softail, except 11 FLSTSE2,

12 FLSTSE3, 13-14 FXSBSE, 14-15

FLSTNSE, 99-07 Touring, 02-17

V-Rod (OEM 72230-98)

893154 Mate for CC# 670860

670865

670853

893154

Fuel Injector Connectors

893146 95-05 EFI models (OEM 72244-95)

893153 Mate for CC# 893156

670865 06-17 Dyna, (except 16-17

FXDLS), 06-24 Touring, 06-15

Softail, (except 11 FLSTSE2, 12

FLSTSE3, 13-14 FXSBSE, 14-15

FLSTNSE), 15-20 Street

893152 Mate for CC# 670865

O2 and Active Exhaust Sensors

Fits 05-17 Softail & Dyna, 05-16 Touring

670853 07-13 Sportster, 07-10 Dyna,

07-11 Softail, 07-09 Touring,

08-11 V-Rod (OEM 72007-05)

670854 07-16 Touring, 07-16 Softail,

07-16 Dyna, 09-16 Trike (OEM

72012-07)

Air Temp Sensor

893152

670854

670862

670862 06-17 models (OEM 72062-06)

Motor Factory Deutsch

Connector Builder Kits

Complete kit contains all the Deutsch

connectors used on Harley-Davidson

motorcycles. Both grey and black kits

comes with tray and order reference chart

to replenish bins. Each kit contains four

of the following, with wedge locks, and

silicone seals.

12-wire receptacle and plug housings






Male pins – strip of 100

Socket pins – strip of 100

670045 Black Builders Kit

Mate-N-Lok

Connector

• 6 of each 2 and 12 point

connectors


connectors


connectors

• 100 pins (male & female)

670085 Builder kit

Molex Builder Kit


connectors


connectors

• 3 of each 12 and 16

point connectors


893220 Builder kit

NAMZ / Dephi &

AMP Component

Connector Builders

Kit

670872 Wide Delphi/AMP

selection of cable

connectors from

Namz repl. OEM

72314-01

Motor Factory Multilock

Connector Kit

These AMP connectors are direct

replacements for those mainly used in

lighting applications. Ideal for integrating

aftermarket lighting to connect to

harness, or to repair existing lighting

wire harnesses. Comes with tray and

order reference chart to replenish bins.

Kit contains eight of cap housing, plug

housings and connector pins.

• 2-wire connector





• Socket pins (pack of 100)

• Male pins (pack of 100)

670075 AMP Multilock Connector Kit

6.10

85091

APPAREL

SEATS &

TOURING

Mate-N-Lok Connector

• 6 of each 2 and 12 point connectors





670085 Builder kit

Universal Mini “U” Barrel

Crimp Tool

• MX-1900 JST and Delphi Terminal.

893294 Tool

Molex MX-150 Terminal

Removal Tool by Namz Cycle

Products

Molex MX-150 style removal tool.

Removes both pins and receptacles. Made

in the USA

664122 Sold each

Chrome Cable Ties

These cable ties feature speciallyprocessed

chrome-plating to resist

cracking, and are ideal to dress up any

wiring job. Sold in packs of 5.

85090 140 mm (5 1/2"-long)

85091 160 mm (6 1/4"-long)

85095 300 mm (11 3/4"-long)

893247

893248

85090

893249

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

Mate-N-Lok Terminal Removal

Tools

Use with AMP Mate-N-Lok connectors.

664143 Rigid type

664144 Slide action (shown)

893242

893243

893245

893244

670873

ENGINE

GASKETS

Maxi-Fuse Connector

PART#

UNIT

900901 Kit

Part#: 920005 , Length: 260 mm, Unit:

Each , Qty.: 1

Delphi-Packard Terminal

Removal Tool by Namz Cycle

Products

A great tool for when working on

Delphi-Packard weather-pack terminal

connectors. Made in the USA

664123 Sold each

Fuses (Non-Automatic Reset)

Mini Fuses (Pack of 5)

893248 2-Amp

893249 5-Amp

893247 15-Amp

ATO Fuses (Pack of 5)

893242 3-Amp (OEM 72301-89)

893243 5-Amp (OEM 72302-89)

893244 10-Amp (OEM 72340-94)

893245 15-Amp (OEM 72347-94)

Maxi Fuse (Each)

670873 40-Amp (OEM 72314-01)

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Replacement Fuse

This replacement fuse with 40 A fits the

mo.unit battery cable with fuse and can

be exchanged easily.

Part#: 920006 , Field of Application:

For mo.unit battery cable with fuse

, Description: 40 Amp , Unit: Each ,

Qty.: 1

Terminal Pin/Receptacle

Extractors

Use with Molex style connectors on most

models 07-19.

400376 Pin extractor

400377 Receptacle extractor

Cap Terminals

893288 OEM Cap terminal (pack 10), (OEM

9905)


893250 893251 893252

893253 893254 893255

Circuit Breakers (Resettable)

Blade Style (Each)

893250 10-Amp (OEM 74586-94)

893251 15-Amp (OEM 74587-94)

893252 20-Amp (OEM 74588-94)

Circuit Breakers (Each)

893253 10-Amp, accessory

893254 15-Amp, accessory

893255 20-Amp, charging system

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.11

EDITION 50

17063

17064

17061

Standard Fuse and Socket

Kit comes with a 20 amp fuse and a

socket with 4” leads. Designed for custom

applications.

17702 Fuse and Socket

Electrical Junction

Blocks

Universal connection

blocks have brass-nickel plated links

and are rated for up to 30 amp loads.

Available with four, six or eight

connection terminals.

17707 Four connections

17706 Six connections

17705 Eight connections

6

895418

17062

19295

895419

893227 893224

Fuses Holder

893224 30-Amp AGU fuses (Pack 5)



893227 AGU Fuse holder

893232 AMP Power plug kit

Solid State Turn

Signal/Hazard Flasher

Stock replacement 12-volt, two

pin solid state flasher. Can be used as a

turn signal flasher or hazard flasher. Fits

all models from 65-83.

640881 Replaces OEM 68543-64C

Circuit Breakers by Standard

Top-quality electrical parts for a wide

variety of Harley-Davidson applications

from the manufacturer of Blue Streak

Performance Products. Sold each.

17064 15 amp (repl OEM 74587-94)

17063 15 amp (repl. OEM 74589-73)

17062 30 amp (repl OEM 74599-77B)

617526 40 amp (repl OEM 74600-97A)

17061 50 amp (repl. OEM 74600-94)

895418 Circuit Breaker With 10-32 Stud

And 2 1/4” Blade Terminals

Spades, 30 AMP

895419 Circuit Breaker With 10-32 Stud

And 2 1/4” Blade Terminals

Spades, 40 AMP

19295 Circuit breaker clips/rivets. Pack

of 10. 17064

NAMZ Sealed ATO Fuse Holder

670857 For 14 gauge wires

4-Way ATC Fuse Block

Sealed cap, this 4-way ATC fuse block

allows you to connect your wiring using

crimp-on spade terminals.

893246 4-way ATC fuse block

Hazard Flasher

D.O.T. approved stock

replacement 12-volt, two-pin bi-metal

(type) hazard flasher unit for all models

from 65-90 (except 69-90 Touring models).

640880 Replaces OEM 68541-64B

Electric Terminal Plate

A perfect reproduction of the Original

Equipment part. Fits FX and FL models

from 70-77.

35633 Replaces OEM 72300-70

Motor Factory Circuit Breakers

American-made replacement circuit

breakers for most models.

25200 30 amp. Fits FL models from

70-72 with mounting bracket

(repl. OEM 74586-70)

25201 30 amp. (repl. OEM 74559-77)

25202 15 amp. (repl. OEM 74589-73)


of 10.

Circuit Breaker Clips

Reproductions of the stock zinc-plated

parts. Includes aluminum rivet. Used many

applications to hold the turn signal flasher

unit and the circuit breaker.


of 10.

893304 893305

Toggle Switch

• 5-Amp

• Requires a 1/4” hole for mounting

893304 High/low beam

893305 Momentary ON & DUMP function

(perfect air ride fill switch)

6.12

APPAREL

17720

17728

SEATS &

TOURING

17719

17727

Standard Toggle Switches

Toggle switches are a high quality parts

for custom applications.

17719 Small toggle switch on/off spade

terminal

17720 Toggle switch 3 position 9” leads

17727 Toggle switch 3 position spade

terminal

17728 Toggle switch on/off screw terminal

Universal Toggle Switch

Handles 6 or 12-volt applications up to

35 amps. It was used for the spotlamps

on 4-speed FL models from 62-84 and

Heritage Softail Classic models from 87-03.

RST toggle switches

687855 RST 3 position toggle switch

687856 RST 2 position toggle switch

Dakota Digital MLX-3012-K

Fuel Light Resistor Pack

• When swapping the OEM speedo-tach

gauge on 14-Up Street or 15-Up Road

Glides to a single Dakota Digital MLX-

3012-K, you will need this module in

order to get the proper fuel reading on

your gauge.

• Plugs in between the fuel pump

connection under the seat and taps

switched power from the RED unused

purge solenoid connector on top the

battery tray.

• Heat-sealable butt splice is pre-installed

for easy hook up.

Part#: 925142 , Fitment: 15-18, 20-21,

23 FLHXS, 15 FLTRUSE, 15-23 FLTRXS,

16-19 FLTRU, 18-23 FLHX, 18 FLHX ANV,

18-23 FLTRX, 19 FLXHS, 20-24 FLTRK,

22-23 FLHXST, 22 FLHX , 22 FLTRXST, 23

FLHXANV

893347

893346

Complete Motorcycle Wiring

Harness

• OEM color-matching harness with

11-second self canceling turn signal

module

• Fuse block holds a full size, commonly

available & replaceable starter relay and

(3) ATO fuses

• A 30-Amp circuit breaker is installed

and is ready for any regulator/charging

system

• Harness provides running light and

turn signal functions to the front turn

signals, run, brake and turn signal

functions for the rear turn signals

• Oil, neutral, high beam, and turn signal

indicator wiring

• Color matching handlebar switch wiring

like 96-13 models

• Headlight wiring with headlight socket

and terminals

• Front turn signal connectors and

terminals

• Rear fender harness with connectors

and terminals

• Key switch wiring with ring terminals

• Coil wire with ring terminals,

tachometer, horn, oil sending unit,

brake switch and neutral switch wiring

with terminals

• Sections of 3/16”, 1/4”, 3/8” and 1/2” ID

heat shrink included

• Heavy gauge 12 (+) power and (-)

ground wires with terminals for battery

connection

890142 Complete motorcycle wiring harness

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Stainless Steel Push Button

Switch

Made of stainless steel, sold each.

893348

FORKS &

SHOCKS

619408 Push button switch

MD Ground Clip

This clip simplifies the ground connection

to the handlebar and to the attached

switches. Makes electric installation easier

and safer.

653382 Ground clip

OEM Complete Ignition

Harness

Plug-n-Play with the 3-position Delphi connector

and the 3 stand-alone mating male crimp

terminals.

893346 OEM 32435-99

893347 OEM 32435-00

893348 OEM 32435-01

EFI Harness

• Match OEM H-D specs

• Simple, plug-and-play installation

PART#

FITMENT

897363 02-03 Touring

OEM

#

70233-

02

UNIT

Each

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.13

EDITION 50

6

893340

36“ Front Turn Signal Relocation Harness

Harness comes with installed OEM connector and tested using

color matching wire. Allows front signals to be removed from

under switch housings while using original connector under the

tank or in the backbone of the bike.

• Solder-on

• 36“ long left and right color matching wires

• Heat shink and pre-installed OE mating connectors included

Unit: Each , Qty.: 1

PART#

FITMENT

893340 96-20 Sportster, 96-05 Dyna, 96-15 Softail, 96-13

Touring, (except 11 FLTRUSE, 04-06 FLTRI, 12 FLTRXSE,

07-09 FLTR, 09 FLTRSE3, 10, 13 FLTRX, 13 FLTRU, 13

FLTRXSE2, 13 FLTRXSE2 ANV)

893341 06-17 Dyna, 11 FLTRUSE, 04-06 FLTRI, 12 FLTRXSE, 07-09

FLTR, 09 FLTRSE3, 10, 13 FLTRX, 13 FLTRU, 13 FLTRXSE2,

13 FLTRXSE2 ANV

OE Reproduction

Complete Bike

Harness

• Replacement Bike Harness

• OEM color-matching harness with ALL OEM connectors preinstalled.

• Fuse block holds a full size, commonly available & replaceable

starter relay and (3) ATO fuses.

• A 30-Amp circuit breaker is installed and is ready for any

regulator/charging system.

• 100% plug-n-play, easy to install harness that allows for direct

connections to all original components.

• This harness is an exact replica of the OEM part number,

70153-99.

Part#: 928119 , Fitment: 99-03 Sportster, (except

99-03 XL1200S) , OEM #: 70153-99 , Unit: Kit ,

Qty.: 1

6.14

Reverse Switch Wire Harness Extensions for Tri

Glide Models

• Intended to extended the handlebar mounted reverse switch

wiring when changing to taller handlebars

• Terminal-to-terminal extension requires the removal of the OE

connector

• Simply connect male terminal to the female terminal, slide

over the 3/16“ diameter shrink over the terminals

• Note which colors are in which connector location before

removal as this will need to be reinstalled

Fitment: 09-13 Trike , Unit: Each , Qty.: 1

PART#

893343 8“

893342 4“

893344 12“

893345 15“

DESCRIPTION

Power Tap Harness

The Namz Power Tap Harness allows you to simply install their

plug-n-play harness in between the rear fender and main harness

and it gives you a 12-volt switched power source.

Part#: 893330 , Fitment: 96-13 Sportster , Unit: Each , Qty.:

1

Complete Bike Harness

• OEM color-matching harness with Run/Turn Signal Self

Canceling Module.

• Fuse block holds a full size, commonly available & replaceable

starter relay and (3) ATO fuses.

• A 30-Amp circuit breaker is installed and is ready for any

regulator/charging system.

• Harness provides turn signal functions to the front and rear

turn signals.

• Oil, neutral, high beam, and turn signal indicator wiring

• Color matching handlebar switch wiring as found on ‚96-13

non-glide models.

• Headlight wiring with headlight socket and terminals.

• Front turn signal connectors and terminals.

• Rear fender harness with connectors and terminals.

• Key switch wiring with ring terminals.

• Coil wire with ring terminals, tachometer, horn, oil sending

unit, brake switch and neutral switch wiring with terminals.

• Sections of 3/16“, 1/4“, 3/8“ and 1/2“ ID heat shrink included.

• Heavy gauge 12 (+) power and -) ground wires with terminals

for battery connection.

Part#: 928120 , Fitment: 96-05 Dyna, 96-06 Softail , Fitment

Note: With basic turn signal function, except EFI models ,

Description: With Starter Relay, 3-Circuits and Turn Signal

Self Canceling Module , Unit: Kit , Qty.: 1

APPAREL

SEATS &

TOURING

890354 890351 890355 890352 890356

890353

FOOT

CONTROLS

HAND

CONTROLS

890348 890349

LIGHTING

ELECTRICAL

890350

890347

EXHAUST

INTAKE

890346

890343

ENGINE

GASKETS

TRANNY &

CLUTCH

890342 890344

DRIVELINE

Fairing Rocker Switch Kit

Several replacement fairing rocker switches in your choice of chrome, black or gold.

Unit: Kit , Qty.: 1

PART# FITMENT COLOR DESCRIPTION OEM #

890354 08-13 FLHX Black Accessories/Cruise 70219-08

890355 08-13 FLHX Chrome Accessories/Cruise 70219-08

890356 08-13 FLHX Gold Accessories/Cruise 70219-08

890351 06 FLHXI, 07 FLHX Black Accessories only 70321-06

890352 06 FLHXI, 07 FLHX Chrome Accessories only 70321-06

890353 06 FLHXI, 07 FLHX Gold Accessories only 70321-06

890348 04-05 FLHTCI, 04-06 FLHTCUI, 07, 09-13 FLHTC, 07-10, 12-13 FLHTCU Black Spot/Accessories/Cruise 70278-04

890349 04-05 FLHTCI, 07, 09-13 FLHTC Chrome Spot/Accessories/Cruise 70278-04

890350 04-06 FLHTCUI, 04-05 FLHTCI, 07, 09-13 FLHTC, 07-10, 12-13 FLHTCU Gold Spot/Accessories/Cruise 70278-04

890346 98-06 FLHTCUI, 07-10, 12-13 FLHTCU Chrome Spot/Accessories/Speaker/Cruise 70271-98

890347 98-06 FLHTCUI, 07-10, 12-13 FLHTCU, 08 FLHTCUSE3 Gold Spot/Accessories/Speaker/Cruise 70271-98

890343 98-02 FLHTC, 99-03 FLHTCUI, 02 FLHTCI Chrome Spot/Accessories 70297-98

890342 98-03 FLHTCUI, 98-02 FLHTC, 02 FLHTCI Black Spot/Accessories 70297-98

890344 98-03 FLHTCUI, 98-02 FLHTC, 02 FLHTCI Gold Spot/Accessories 70297-98


WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.15

EDITION 50

930314 930315 930316 930317 930318

930322

6

Oxygen Sensor

• Direct replacement oxigen sensor


930319 930320 930321

PART# FITMENT FITMENT NOTE OEM #

930314 07-09 Touring, 07-13 Sportster Front or Rear 27690-08, 27719-07

930315 06-11 Dyna, 07-11 Softail, 09-11 V-Rod, 09 Touring, 09 Trike Front or Rear 27683-06, 27683-07

930316 08-11 V-Rod 08 V-Rod front and rear cylinder, 09-11 27703-08

V-Rod rear cylinder

930317 10-20 Touring, 10-20 Trike Rear only 27809-10

930318 10-16 Touring, 10-16 Trike, 15-20 Street Front only 27729-10

930319 12-17 Dyna, 12-17 Softail, 12-17 V-Rod Front only 32700005

930320 12-17 Dyna, 12-17 Softail, 12-17 V-Rod, 14-20 Sportster Rear only 32700006

930321 14-20 Sportster Front only 32700026

930322 17-20 Touring, 17-20 Trike Front only 32700046

6.16

APPAREL

899865 899866

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

899867 899868 899869

ELECTRICAL

EXHAUST

Feuling Stock Replacement O2

Sensors

FEULING® oxygen sensors are precision

made consisting of a ceramic body made

of stabilized zirconium dioxide, surface

coated with gas-permeable platinum

electrodes and a porous ceramic to

aid the prevention of erosion due to

contamination and particulates in the

exhaust gases.

An oxygen sensor or commonly called 02

sensor is a device which determines the

oxygen content of the exhaust gas by

producing a voltage proportional to the

amount of oxygen in the exhaust versus

the air.

Oxygen sensors can fail when the sensors

ceramic element is exposed to certain

types of contaminates such as silicone

compounds or even an oil-burning engine

can easily foul a sensor. Small amounts

of contamination in the gasoline or

over-the-counter fuel additives, which are

not oxygen sensor safe, can also kill an

oxygen sensor.

Failures can occur instantaneously at

the time the contaminant contacts the

02 sensor, causing a dead sensor, or

gradually over a period of time. Gradual

deterioration results in a slow sensor

which does not react as quickly as it

should. Slow oxygen sensors can cause

a drop in fuel economy of 10-15%,

excessive exhaust emissions and poor

drivability. Unfortunately, the symptoms

of a slow oxygen sensor are not always

obvious to the rider unless a major

decline in fuel economy is noticed or

drivability problems occur.

Life expectancy of an average oxygen

sensor in a properly tuned engine is

typical 30,000 - 50,000 miles

PART# DESCRIPTION FITMENT OEM #

899865

899866

899867

899868

899869

12mm Oxygen Sensor,Black

Connector 29” OAL, 4 Wires

12mm Oxygen Sensor, Grey

Connector, 29“ OAL, 4 Wire

18mm Oxygen Sensor, 12.5”

OAL, 2 Wire Sensor

18mm Oxygen Sensor 16.25“

OAL, 2 Wire Sensor

18mm Oxygen Sensor 22.25”

OAL, 2 Wire Sensor

10-16 Touring, 10-16 Trike, 15-20 Street. Front only 27729-10

10-16 Touring, 10-20 Trike. Rear only 27809-10

07-13 Sportster, (except 08-10 XR1200, 10-13 XR1200X), 07-09 Touring, 09 Trike.

07-08 Touring (incl. CVO) front and rear cylinder, 09 Touring (incl. CVO) front 27719-07

cylinder

07-11 Sportster, 07-09 Touring, 09 V-Rod, 08-10 FXDF, 07-09 FXDL, 07-11 FXDB,

07-11 FXDC, 07-08, 10-11 FXDWG, 08 FXDSE2, 09 FXDFSE, 10 FXDFSE2, 06 FXDLI,

06 FXDBI, 06 FXDCI, 06 FXDWGI, 07 FXDSE, 07 FXSTSSE, 07 FLSTSC, 07 FLSTN, 07 27683-06

FXSTD, 07 FXST, 07-08 FXSTB, 07-11 FLSTC, 07-11 FLSTF, 08 FXSTSSE2, 08 FXCWC,

09 FXSTSSE3, 09-11 FLSTSB, 10 FLSTSE, 10-11 FLSTFB, 11 FLSTSE2

08-11 V-Rod ( 08 V-Rod front and rear cylinder, 09-11 V-Rod rear cylinder )

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

18mm O2 Sensor

Wide band Lambda 02 sensor, fits auto tune modules and dynos. 5 wire, broadband, flat contacts in connector.

Part#: 917815 , Field of Application: For Auto Tune Modules and Dynos , OEM #: 27719-07 , Unit: Each ,

Qty.: 1


LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.17

EDITION 50

920465 920466 920467 920469 920470

6

Oxigen O2 Replacement Sensor

• Direct fit, no modifications needed.

• Extra high temperature dual shield end

• Improved engine performance

• ISO 9001 and TS 16949 certified manufacturing plant

• Meets or exceeds OEM specifications


920471

PART# FITMENT FITMENT NOTE DESCRIPTION OEM #

920461 07-08 Touring (incl. CVO) front and rear

cylinder, 09 Touring (incl. CVO) front cylinder

07-08 Touring (incl. CVO) front and rear 2 Wire 7 1/2“ 27719-07

cylinder, 09 Touring (incl. CVO) front cylinder

920462 09 Touring, 06-11 Dyna, 09-11 V-Rod 09 Touring, 06-11 Dyna, 09-11 V-Rod. 09 2 Wire 11 1/2“ 27683-07

Touring and 09-11 VRSC, rear only

920463 08-11 V-Rod 08 V-Rod front and rear cylinder, 09-11 2 Wire 17 1/2“ 27703-08

V-Rod rear cylinder

920464 10-16 Touring, 10-16 Trike, 15-20 Street Front only 27729-10

920465 10-20 Touring, 10-20 Trike Rear only 27809-10

920466 12-17 Dyna, 12-17 Softail, 12-17 V-Rod Front only 32700005

920467 12-17 Dyna, 12-17 Softail, 12-17 V-Rod, 14-20 Rear only 32700006

Sportster

920468 14-20 Sportster Front only 32700026

920469 08-10 XR1200, 10-13 XR1200X 27690-08

920470 17-20 Touring, 17-20 Trike Front only 32700046

920471 18-20 Softail 32700083

6.18

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

mo.unit blue Control Box

• The mo.unit blue is the digital control unit for your motorbike, the heart of the entire on-board electrical system. It can be

operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also

performing fuse functions. There are considerably fewer relays and individual components in the wiring harness and the vehicle

can be rewired with less effort in a very short amount of time.

• Features WITH smartphone and mo.ride App

• Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and mo.unit blue energy usage

• Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone)

• Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.)

• Alarm system mode and sensitivity can be adjusted

• The on board voltage can be monitored in the App

• Diagnostics on all inputs and outputs: current, voltage and device temperature measurement

• Real-time audio fault messages issued via the helmet headset

• Outputs can be switched manually via smartphone (except for starter)

• Firmware updates provided anywhere via smartphone and App without removal.

• Setup menu can be configured anywhere via smartphone and App without removal

• Speedometer input for comparing the vehicle mileage with mo.ride can be used for vehicle management with automatic alerts for

maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc

• Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks

• Parking position display and Ping! for help locating the vehicle

• LIN bus connection for connecting to compatible motogadget products at a later date

PART#

UNIT

900292 Each

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

922804 922803 922802 917437 917438

i.LASH Vehicle-Specific Adapter Cable with Integrated Simulation Electronics for Rear 3in1 DF

Lights

• The i.LASH products contain all parts so the indicator frequency is correct and dashboard warnings do not appear. The equipment

includes two adapter cables for the indicators with conncetors that fit the vehicle, if necessary with integrated adaption

electronics and if necessary a load-independent flasher relay.

• Vehicle compatible plug connection

• Very easy installation

• Usual flashing frequency

• No dashboard warnings

• Undisturbed operation of all Kellermann LED-indicators

Unit: Set , Qty.: 1

PART# FITMENT FITMENT NOTE DESCRIPTION

922802 18-20 FLSL, 18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20

For Rear 3 in 1 DF Turn Signals

FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 18-20

FXFB, 18, 20 FXFBS 114, 18-20 FXLR, 18-20 FXBB, 19 FXFB 114, 20 FXLRS

922803 14-20 Sportster For rear 3 in 1 DF Turn Signals

922804 13-17 Softail For models with For Rear 3 in 1 DF Turn Signals

standard 3in1

indicators

917437 18-20 Scout Bobber For Front Turn Signals

917438 18-20 Scout Bobber For Rear 3 in 1 DF Turn Signals


WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.19

EDITION 50

6

i.SED 3-In-1 Turn Signal Module

• For mounting Indicators with higher wattage than original,

indicators on vehicles where the ground is „plus“ but not

„minus“ as usual or „DF“ products on vehicles where the

indicators ground is switched but not the plus as usual. Note:

On some models, the “LED displays” option must be activated

PART# FITMENT DESIGN UNIT

912573

14-20 Sportster, 12-17

Dyna, 11-24 Softail, 14-

i.SED - V

24 Touring, 14-24 Trike,

12

21-24 Sportster RH, 21-24

Pan America

Set

i.BOS Turn Signal Module

• Provides correct function of the control and hazard

light, e.g. when using DF versions for Harley Davidson

models with Can-Bus.

PART# DESIGN UNIT FITMENT

912572 i.BOS - CL 1 Set

14-20 Sportster, 12-17 Dyna, 11-

24 Softail, 14-24 Touring, 14-24

Trike, 21-24 Sportster RH, 21-24

Pan America

m.button

Another innovation from motogadget: the m.button.

It’s a big help - in combination with the new m.unit blue, basic and m.unit v.2

- in reducing ‘cable clutter’ and simplifying wiring harnesses. Integrated into

the handlebar tube - or any other adequate location - this tiny cylinder will

electrically connect all handlebar instruments, switches and buttons. Using

state-of-the-art bus technology, the m.button digitally processes signals and

transmits them to the m.unit over a thin cable. The electrical consumers

will then be switched inside the m.unit. All control wires are moved into

the handlebar. This saves space, weight, labour and time. A ‘must have’ for

custom bikes with clean-look handlebars.

690974 mo.Button

CBW1 CAN-Bus Resistor

• The CBW1 resistor provides a required electrical load for your

vehicle, which, if the dip switches are set correctly, will result

in no flashing of the accessory flashers in the cockpit. If the

accessory indicators fail due to an electronic fault, an error

message is immediately displayed in the cockpit. Up to 2

channels can be operated, such as turn signals at the rear left

and turn signals at the rear right. The CBW1 can also be used

on vehicles with original LED turn signal equipment.

• Dimensions: Height = 11mm, Width = 31mm (without straps),

Width = 46mm (with tabs), Length = 40mm

• Cable length = 200mm with pins

• Resistance values: 150 ohms, 200 ohms, 170 ohms, 240 ohms,

300 ohms, 400 ohms, 600 ohms, 1200 ohms

PART#

UNIT

913218 Each

Front ABS 12“ Extension Harness

• 12“ extension

• Allows a simple way to safely lengthen your front end while

still having ABS connected properly

• 100% Plug-n-Play

Fitment Note: ABS models , Length: 304.8 mm, Unit: Each

, Qty.: 1

PART#

FITMENT

921795 08-16 Touring

921796 17-22 FLHR, 17-18 FLHRC, 18-24 FLHRXS

CB2 Position Light Control Box

• With few work steps install the CB2 PL CONTROLBOX between

the 2in1 indicator and activate a new great safety feature.

During the flashing process, the CB2 box switches the position

light off and starts only again after the flashing process. Thus,

the flashing signal is better perceived in road traffic.

• Dimensions: Diameter: 11 mm, Length: 17,5 mm

PART# FITMENT UNIT

913219 Not suitable for headlights with position light. Pair

6.20

APPAREL

SEATS &

TOURING

930328 930324 930329 930323

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

Crankshaft Sensor

• Direct replacement crankshaft sensor


930327 930325 930326

PART# FITMENT OEM #

930328 99 Dyna, 99 Touring 32497-99B

930324 00-03 Dyna, 00-03 Touring 32798-00B

930329 00 Softail 32707-00B

930323 06-20 Sportster, 06-17 Dyna, 01-17 Softail, 04-16 Touring, 09-16 Trike 32707-01C

930327 04-05 Sportster 32804-04B

930325 04-05 Dyna 32798-04C

930326 18-20 Softail, 17-20 Touring, 17-20 Trike 32700048

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.21

EDITION 50

912995

895525 895524

6

TLT Moto CAN Switchbox

To convert handlebar controls, tacho or speedo on CAN Bus

equipped models. This switchbox makes it possible! To ease up

the connection to the bikes harness we offer a handlebar and a

speedometer cable kit separately. For more detailed instructions

visit our dealer store!

912995 TLT CAN switchbox, 14-20 Sportster, 12-17 Dyna, 11-24

Softail, 14-24 Touring, 14-24 Trike

895524 TLT handlebar-cable-kit, 14-24 Touring, (except

23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24

FLTRXSTSE), 11-24 Softail, 12-17 Dyna, 14-20 Sportster,

14-24 Trike

895525 TLT speedometer-cable-kit

Wire Plus 105-Series Wiring System

The ultimate chopper-style wiring system! It features a solidstate

breaker pack (breakers that will never burn out) that

measures only 1" x 1" and is molded in waterproof epoxy with

diagnostic LED’s. The pre-assembled harness is configured for an

automotive start switch (switch sold separately) which eliminates

start circuit wiring in the harness. This system is supplied with an

installation kit that allows the builder to add indicator and turn

signal wires. Custom applications.

640362 Complete kit

912574

912575

6.22

i.NEX - V12 Electronic Solution Box

• Electronic universal solution for motorcycle lights such as

indicators, tail/brake light and position light

• Compatible with classic bikes, new models and modern

operating systems

• Correct flashing frequency

• No error messages in the cockpit

• No disruptive quiescent currents

• Installation of indicators with higher power consumption

[watts] than original

• Installation of indicators with lower power consumption

[watts] than original

• Installation on motorcycles with minus-switched indicators

• Installation on motorcycles with current-controlled indicators

Part#: 929363 , Field of Application: Suitable for standard

12 volt lights with a total output of up to 10 watts , Unit:

Each , Qty.: 1

R1 Miniture Turn Signal Relay

• All necessary components required for installation are included

• Simple installation in feed to the indicator switch or swap the

original 2-3 pole flasher relay

• Connection to indicator control light also possible

• Restricts the accompanying flashing of non-activated

indicators

• Load-independent / steady flash rate

• Switching capacity 0,5-50 watt

• Very small dimensions 22 x12 x 6 [mm] (L/W/H)

• Suitable for indicator switches

• Suitable for 6 and 12 volt DC applications

PART# FITMENT DESIGN UNIT

912574 R1 Each

912575

In certain cases the hazard warning

flasher must be deactivated.

R2

Each

APPAREL

920478 920479

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

920480/-81 920482

LIGHTING

MD Cycle Control Box

The cycle control box is one of the smallest units on the market.

It allows the use of push buttons for functions such as hi-low

beam, turn signals left and right, horn and last but not least it

even has an option for a starter button! The unit can be used

with conventional or LED turn signals. Due to its size it can be

installed almost anywhere on the bike, even in the headlight! 50

mm x 45 mm x 21 mm (2” x 1 3/4” x 0.8”)

681572 MD Cycle Control Box

681897 MD Cycle Control Box including hazard light function

681898 MD Cycle Control Box including hazard light and self

canceling turn signal function (17 seconds)

920483 920484

ELECTRICAL

EXHAUST

INTAKE

ENGINE

920485

GASKETS

TRANNY &

CLUTCH

MD Cycle Control Databus System

This little unit has the same functions as the standard MD Cycle

Control box but instead of running five wires through and out of

your handlebar there is only one wire that comes out and goes

to the module which is hidden somewhere on the bike! There is

no way to get a cleaner look. Detailed instructions included.

685430 Sold each

OEM Replacement Crank Sensor

• These are designed to be a direct replacement Crank sensor


PART# FITMENT OEM #

920478 99 Dyna, 99 Touring 32497-99

920479 00-03 Dyna, 00-03 Touring 32798-00

920480 00 Softail 32707-00

920481 06-20 Sportster, 06-17 Dyna, 01-17 Softail, 32707-01C

04-16 Touring, 09-16 Trike

920482 02-17 V-Rod 32313-01

920483 04-05 Dyna 32798-04

920484 04-05 Sportster 32804-04

920485 18-20 Softail, 17-20 Touring, 17-20 Trike 32700048

920486 95-98 Touring 32447-95

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.23

EDITION 50

681988

6

motogadget mo.Flash Relay

• Incredibly small and lightweight - just

a cable with a tiny device the size of a

mint

• Perfect for Custom Bikes with limited

space – no more clumsy OEM flasher

relay

• Laying cables together with the

mo.Flash inside a handlebar, frame tube

or directly on the wiring loom

• Completely load independent (widerange

indicator relays) – always stable

and correct flash rate

• Suitable for all flasher types: LED, Micro

size, 10 Watt, or 21 Watt

• No bulky load resistors necessary

• It works with 1 or 2 or 4 flashers in use

• Instant, loss less flash light operation

• Very easy to install – just connect the

two wires

• Completely waterproof

• Short - circuit - proof

• Automatic overload shut down

• Safe against high voltage spikes

• Generates no heat during operation

• Operating voltage from 5V to 18V

• Also suitable for 6 V vehicle voltage

systems

• Made by motogadget in Germany

681988 MG RELAY mo.Flash

motogadget mo.Relay+

The mo.Relay+ is a true combination of

a load independent digital turn signal

relay with push button functions. 4 modes

are available by pushing the buttons in

different time frames:

• Changing lines: short fingertip on

the button - turn signal flashes 3x,

automatic shut off after 3rd flash

• Turning: short push of the button -

flashes 10x, automatic shut off after

10th flash

• Permanent: push longer the button -

will turn off after second push of the

button when needed

• Hazard warning flasher by pushing

both buttons for left and right side

together

The m-Relay+ is load independent

(1-100W) and works with almost every

possible light combinations such as LEDturn

signals, micro-turn signals, halogenturn

signals, 10W or 21 Watt filament

lamps and delivers a constantly stable

flash mode. Bright and efficient turn

signal lights caused by a very efficient

microelectronic.

653346 m Relay+

mo.Relay - a small electronic

relay to switch high current

devices with tiny loads

The mo.Relay is a small, compact relay

to switch almost all kind of devices like

e.g. horn, ignition etc. The mo.Relay

moves high loads and currents directly

to the switched devices (the front

lamp for example). Thus enhances

electrical reliability of your bike and

reduces voltage drops in power supply

significantly. The load und current at the

handle bar switch gear and also at the

ignition lock is reduced to a minimum.

So you can use cables with very small

diameter at the switch gear. Damaged

and scorched contacts or cables will never

happen again. The absence of voltage

drops let shine your lights much brighter

and enhances your security on the road.

A threaded hole in the center of the

housing enables fast and easy mechanical

installation almost anywhere at the

bike - especially when you use multiple

units. The housing of the mo.Relay is

CNC machined and black anodized. It is

internally molded and completely water

proof and vibration resistant. Two red

cables allow the connection of devices

for 12V power supply and up to 20A load

current. The two black cables allow the

connection of the switch gear. Please

note! the mo.Relay is not intended as a

control unit for push button gear. Outer

diameter 19 mm, Hight without cable

19mm

682834 MG mo. relay 12V 20A

682347

682346

Spare parts for mo.Lock

The mo.Lock is a contact free digital ignition lock with RFID

technology and substitutes mechanical ignition locks or their

electrical switching feature respectively.

• RFID technology is tamper-resistant

• each key has a unique code

• the key first activates the mo.Lock without touching it and

then, via the relay, the entire on-board system

• neither key nor mo.Lock suffer from mechanical wear

• the key requires no battery - failsafe

• no overload or scorched pins possible due to indirect

switching via the 40 A main relay

• the mo.Lock is very compact an can be mounted hidden in

many places

• water tight and vibration resistant because of the

moulded-in construction

• depending on the model, key sizes range from very small

(key fob sized) to tiny (glass vial) and may be integrated

into other objects like gloves, clothing, pendants (NON-

METALLIC!) etc.

• keys can be easily purchased and 'learned' to any mo.Lock -

your integrated locksmith

• a switching distance of 4 - 5 cm ensures convenient

switching while excluding the possibility of accidental

engagement

• An integrated LED shows the status of the mo.Lock while

mounting, connecting and 'teaching' new keys

Dimensions and specifications

Transmitter/receiver, diameter of

installed assembly: 30 mm, Height:

14 mm, Cable length: approx. 50

cm, Weight incl. cable: approx. 30

g, Fixture: 2 x M3 threaded hole

on back side, Operating voltage:

6V - 18V, Operating temperature:

-20 °C... +80 °C

Parts delivered

Transmitter/receiver, diameter of

installed assembly: 30 mm, Height:

14 mm, Cable length: approx. 50

cm, Weight incl. cable: approx. 30

g, Fixture: 2 x M3 threaded hole

on back side, Operating voltage:

6V - 18V, Operating temperature:

-20 °C... +80 °C

Spare parts

682346 mo.Lock key teardrop

682347 mo.Lock key glass tube

682348 mo.Lock relay 12V 50A

682349 mo.Lock backing capacitor

6.24

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

mo.lock NFC Ignition Switch

• NFC technology is tamper-resistant

• Each key has a unique code

• The key first activates the mo.lock without touching it and

then, via the relay, the entire on-board system

• Neither key nor mo.lock NFC suffer from mechanical wear

• The key requires no battery

• No overload or scorched pins possible due to indirect switching

via the 40 A main relay

• The mo.lock NFC is very compact an can be mounted hidden in

many places

• Water tight and vibration resistant because of the moulded-in

construction

• Keys can be easily purchased and ‚learned‘ to any mo.lock NFC

- your integrated locksmith

• A switching distance of 2 - 4 cm ensures convenient switching

while excluding the possibility of accidental engagement

• An integrated RGB-LED shows the status of the mo.lock while

switching, connecting and ‚teaching‘ new keys

• Included parts: mo.lock NFC, 2 keys, 1 automotive relay,

12V/40A, Detailed installation and operating instructions

Part#: 924915 , Field of Application: We do not recommend

using the mo.lock in conjunction with an immobilizer.

Please ask your dealer whether the immobilizer can be

deactivated. , Color: Black , Unit: Set , Qty.: 1

mo.lock NFC Full Wiring Kit

As a complete solution, the mo.lock wiring harness enables very

quick and easy installation of the mo.lock in the vehicle‘s onboard

network.

Simply plug the relay supplied with the mo.lock into the

appropriate relay socket on the wiring harness, connect three

prepared cables to the mo.lock and connect two eyelets to the

battery poles - done! No soldering or crimping is required.

All cables are pre-assembled and the integrated 40A main fuse

protects the new electrical system centrally and safely.

• Cable from relay via fuse to +12V and ground: 60 cm

• Cable from relay to mo.lock NFC: 150 cm

• Cable from relay to vehicle electrical system: 150 cm

• integrated relay socket

• integrated 40A main vehicle fuse

• pre-assembled battery connection (M6 eyelets)

Part#: 924916 , Unit: Set , Qty.: 1

mo.lock NFC Replacement Key

The mo.lock NFC key is a replacement key for the mo.lock

NFC ignition lock. Up to 125 keys can be trained on a mo.lock.

Teaching in additional keys requires at least one key that has

already been taught in.

Part#: 924918 , Unit: Each , Qty.: 1

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

mo.lock NFC Replacement Bracket

Part#: 924919 , Color: Black , Unit: Each , Qty.: 1

FORKS &

SHOCKS

SHEETMETAL

mo.lock NFC Connection Cable

The mo.lock NFC connection cable is a high-quality, 2m long,

3-wire cable for connecting the mo.lock NFC and fits the cable

cover included with the mo.lock.


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.25

EDITION 50

Custom Chrome Turn Signal Load Equalizer

Very small designed load equalizer exclusively for Custom

Chrome.

686596 Sold each

6

Custom Chrome Load Equalizer II for CAN-Bus

models

The Load Equalizer II compensates the load differnce between

the LED unit and the board system on 11-24 Softail, 12-17 Dyna,

14-24 Touring, 14-20 Sportster, 14-24 Trike, 15-20 Street. To be

used with LED taillight, brake light and turn signals.

652728 Load Equalizer II

604920

912596

912597

Turn Signal Load Equalizer I

The Motor Factory LAP K1 compensates load differences

between flasher relays and flasher bulbs.

PART# FITMENT DESCRIPTION

912596

912597

63-13 Sportster, 91-11 Dyna,


85-94 FX Model, 63-65

Panhead, 66-84 FL Shovel, 71-

84 FX Shovel, 02-17 V-Rod

Without Can-Bus

11-24 Softail, 12-17 Dyna, 14-

24 Touring, 14-20 Sportster,

14-24 Trike, 15-20 Street

for use with LED Lights

for use with LED Lights

On some models, the

“LED displays” option

must be activated

Intensifier HI/LOW Modules

All Badlands Intensifier High/Low Modules are designed

to provide an inexpensive method to convert a (1) wire

incandescent, Halogen or LED light into a dual function or HI/

LOW light. Example, if you are installing an old school tail light

that has only (1) wire for illumination and (1) wire for ground

you would need our IHL-01 Module. This module will allow you

to have running and brake light illumination on that (1) single

wire! If you purchased a new pair of turn signals and they only

have (1) wire for illumination and (1) wire for ground, you would

need our IHL-02 Module. You would install this module to the

front or rear turn signal output wires and a protected switched

12+ power source. Then the output of our module would feature

turn signal and running light functions on (1) wire per side. If

room is an issue, (custom bike application) our IHL-03 Intensifier

will perform the same functions of our IHL-02 but are only rated

for 500-milliamps maximum.

TYPE OF

CONNECTION

Hard-Wired

DESCRIPTION

Single light intensifier

(Universal)

PART#

604920

6.26

APPAREL

SEATS &

TOURING

12690

604909

890080

604908

FOOT

CONTROLS

HAND

CONTROLS

36924

890078

890081

890082

LIGHTING

ELECTRICAL

699997 604924

890079

EXHAUST

Load Equalizers I, II, III and for CAN/BUS Models

All Badlands Load Equalizer Modules are designed to provide you the ability to use small incandescent bulbs, Halogen bulbs or LED

style (module operates both front & rear) turn signals without a rapid flash. (INSTALL OUR MODULE BEFORE YOU INSTALL YOUR

NEW LIGHTS!) A “rapid-flash” is caused by the factory turn signal module not seeing the specific amperage draw that the factory

installed 1156/1157 bulbs provided. Whether you have a Plug-n-Play module or the hard-wired version, Load Equalizer Modules all

work the same.

LOAD TYPE OF

EQUALIZERS CONNECTION DESCRIPTION

LED

READY

PART#

I Hard-Wired All models 73-99 No 12690

II

Hard-Wired

All models 73-99. Same as the version 1 but with emergency flasher capability ,

when the bike is shut off.

No 36924

III Hard-Wired All 91-13 models Yes 699997

III

Plug-n-Play

FLH 96-13 (except Street & Road Glides 10-17), FX & Dyna 97-13 (except Rocker),

XL models 99-03

Yes 604908

III Plug-n-Play XL 04-13 Only Yes 604909

III Plug-n-Play Street Glides and Road Glides 10-13 Only Yes 604924

FOR CAN/BUS MODELS

FRONT USE ONLY

CAN/Bus Plug-n-Play 14-20 Sportster, 12-17 Dyna, 11-24 Softail, 14-24 Touring Yes 890078

REAR USE ONLY

CAN/Bus

Plug-n-Play

Softail 11-17, FXDF 12-17, FXDB/P 12-17, FXDWG 12-17, FLD 12-17, FXDC/L 12-17,

FLSTC 12-17, FLSTF/B 12-17, FLSTN 12-17, FXST 12-17

Yes 890079

CAN/Bus Plug-n-Play FXSB 12-17, FLS 11-17 Yes 890080

CAN/Bus Plug-n-Play XL 14-20 Yes 890081

CAN/Bus Plug-n-Play All Touring Models 14-24 Yes 890082

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

Plug & Play Illuminator Module

• Like all Victory Motorcycles, Indian front or rear turn signals have the running light feature. The module installs in minutes and

adds the running light feature to front turn signals.

PART#

FITMENT

900899 15-17 Indian Bagger, 14-17 Indian Cruiser, 15-17 Indian Touring

900900 15-24 Indian Scout


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.27

EDITION 50

604900

6

918462

Illuminator Run, Brake and Turn Signal Module

All Badlands Illuminator Modules are designed to provide you

running light, brake light and turn signal functions to each rear

turn signal. These modules also have a built-in Load Equalizer

which is perfect when switching out factory turn signals to

halogen or LED versions.

Color: Black , Unit: Kit , Qty.: 1

PART#

FITMENT

604900 99-03 Sportster, 97-11 Dyna, 96-10 Softail, 97-13

Touring, (except 10-13 FLHX, 10 FLHXSE, 10, 13 FLTRX,

11 FLHXSE2, 12 FLHXSE3, 12 FLTRXSE, 13 FLTRXSE2, 13

FLTRXSE2 ANV)

918462 19-20 FXDRS 114

Badlands Illuminator Pro Module

This new module is a custom builders dream, and it also works perfectly

on stock models. It has several of our existing modules built into one

to control every feature you would want your turn signal system to

do. Automatic canceling, front running lights and turn signal on single

filament halogen or incandescent bulbs and LED’s, rear running lights,

brake light function and turn signals on single filament halogen or

incandescent bulbs as well as LED’s. A built in load equalizer runs LED’s

and up to 70 watts per corner / each station. You can cancel at any time

for a quick lane change and this module has emergency flasher mode that

does not build up heat.

• Built in automatic canceller

• Built in load equalizer

• Front run & turn signal for single filament bulbs, halogen

bulbs & LED’s

• Rear run, brake and turn signal functions like our

“Illuminator” module

• Emergency flasher without heating up

• Cancels at any time for quick lane changes

604904 Illuminator Pro

12675

604902

Hard-Wire Super Load Equalizer

This Plug-n-Play CAN/Bus Load Equalizer is needed to prevent

brake light BCM trouble codes when removing center taillights

on 2011-Up HD CAN/Bus models.

Part#: 918463 , Fitment: 14-20 Sportster, 12-17 Dyna, 11-24

Softail, 14-24 Touring, 14-24 Trike , Unit: Each , Qty.: 1

75567

75566

Self-Cancelling Turn Signal Modules

These are Original Equipment items. Excellent for stock

replacement or custom projects.


75566 Replaces OEM 68537-83G

PART#

604901

604903

Self Cancelling Modules

Designed to provide a less expensive alternative to the factory

flasher module. This modules are not only a built in 11-second

flasher but are also a Load Equalizer which allow you to use

small incandescent bulbs, halogen bulbs or LED’s without any

rapid-flashing issues. They also have a 4-way flasher feature for

safety or parade mode just like the factory flasher unit. Whether

you have a Plug-n-Play module or the hard-wired version, they

all work the same.

TYPE OF

CONNECTION

12675 Hard-Wired

DESCRIPTION

Universal on 73-90 models

without self canceling or Custom

Bikes

604901 Plug-n-Play FLH 87-93, FX 90-93, XL 92-93

604902 Plug-n-Play

604903 Plug-n-Play

All 94-99/2000 models (until

Delphi TSM system with

8-Position MALE Deutsch

Connector)

All 94/2000 models (Until Delphi

TSM System)

6.28

APPAREL

Marker Light X Box

Part#: 917974 , Length: 38 mm, Height: 11 mm, Width: 16

mm, Unit: Each , Qty.: 1

SEATS &

TOURING

FOOT

CONTROLS

Brake 2 Flash Control Module

• Wakes up riders behind you

• Provides more safety

• 14 different flasher mode adjustments

• Easy programming

PART#

HEIGHT

902045 11 38 16

Version H Electronic Box

• The box is able to control the main electrical functions of your

motorcycle from a central location.

• Light control with switch and push button possible

• Flasher control with switch and push button possible

• Emergency flash function

• 2 x flashes when ignition on

• Comfort flasher function

• Control of horn

• Control of starter relay

• Control LEDs in the box

PART#

HEIGHT

902034 25 40 12.5

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

Version D Electronic Box

• This electronic box version D controls the main functions of

your motorbike in combinations with switches or push buttons.

PART#

HEIGHT

902035 12 50 42

• Integrated flasher relay,

control with buttons or

switches

• Integrated output for

direction indicator in the

cockpit

• Integrated sidestand - and

neutralswitch inputs if

security options in the box

are activated

• Auto flasher off function,

emergency flasher, “Position

light” mode adjustable

• Control of low - and high

beam possible with a button

or a switch

• Control of starter relay

• Control of the horn

• Brake light control

• 8 status LED´s at the outputs

give a visible response of the

power outputs

• Recognizes automatically

a connected handle bar

adapter for button control.

A handle bar adapter is

available under “accessoires”

• The new D-Box can be

controlled via only 2 push

buttons without the need for

the user to learn complicated

button combinations:

• One short press on one

button will activate the

corresponding direction

indicators. One more short

press on the button switch

off the direction indicators

• A long press (above about 0,3

seconds) at the left button

switch on the horn

• A long press (above about 0,3

seconds) at the right button

will switch on the starter

• Two short presses at the left

button will switch between

high - and lowbeam

• Two short presses at the right

button will switch on or off

the ignition

•

• The power outputs are

short circuit protected with

an implemented self reset

function

Touch 2 Switch 2-Channel Relay

This electronic relay has 2 independent channels. Each output

can drive 70 Watt. The small size allows installation in the

handlebar or headlight. You can switch different loads with one

push button. Two different inputs allow you to control each

output with the pushbutton, whether the pushbutton is wired to

ground or + 12V. The Touch 2 Switch module can also be used as

a standard toggle switch relay. Just connect the thin brown input

cable directly to ground and the thin blue input cable directly to

+ 12 volts. That‘s it. Now the module switches between output

1 and output 2 when you press the button wired to the thin

purple cable.

• Inputs for non-locking push-button switches in separate mode

and for locking switches if the channels are linked together.

• You can use very thin cables for the connection between the

buttons and the module

• 2 independent channels, that can be linked together in order

to increase the maximum load to 120 Watt.

• The small dimensions allow an implementation in the most

handle bars.

• The module can also work as voltage inverter.

• Push-button switch (not latching) with connection to chassis or

to + 12 Volt



ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.29

EDITION 50

Handlebaradapter for D-Box or C-BS Wiring

Harness

• Watertight cast housing

• Connections 0.14mm², 20cm length

Part#: 921939 , Color: Blue , Length: 25 mm, Height: 8 mm,

Width: 10 mm, Unit: Each , Qty.: 1

Multi Flasher Relay

• This is a small flasher controller for pushbuttons in a small

package what will fit in every handlebar. A comfort flasher

function is integrated which will switch off the indicators after

a while if no button is pushed.

• Emergency flash function

• 2 x flashes when ignition on

• Flasher function with automatic off

• 2 outputs, 5A each

PART#

HEIGHT

902046 11 38 16

6

6 Booster 6V to 12 V Converter

This module is a 6 Volt to 12 Volt converter. It allows the

implementation of modern 12 Volt equipment, like led

indicators, rearlights or speedos in a vintage bike that still have a

6 Volt charger system. The maximum usuable load is 3 Watt or 2

Watt constant load. The module fits in the handlebar or even in

most LED rearlights due to it´s small size.



Mini Switch Relay

• The box is able to control the main electrical functions of

your motorcycle from a central location with switches or push

buttons.

• Light control with switch or button mode possible

• 2 Outputs, 5A each

• “Lights off when ignition on“-possibility

PART#

HEIGHT

902047 11 38 16

Air Ride Control Relay

• This Air Ride memory unit saves and recalls the pump up time

and the valve open time. It allows the user to save and recall

individual heights of the bike.

• Control of „pump“-time and „valve open“-time

• Press on the button recalls the saved time

• 2 outputs, 200W continous / 350 peak each

PART#

Nano Flasher Relay

• Smallest electronic flasher relay on the bike market

• Handles loads between 0,1 Watt and 42 Watt

• Replaces the standard flasher relay in custombikes

• Glued in an ABS housing.

• Works with LED lights or traditional halogen bulbs

PART#

HEIGHT

902040 12.5 40 25

HEIGHT

902048 5 15 9

Vari Load Load Equalizer

• If you have installed the new beautiful LED flashers on your

bike and now you have trouble with the flasher speed cause

the new LED lights have a much lower power consumption in

comparison to the old bulbs, leading in faster flashes or any

kind of other trouble with your ECU on your bike. However

You can buy and try different load equalizer for your bike

until you have spend much time and money and have found

the right load equalizer for your bike.

• The load is simple adjustable by touching and holding the blue

cable to + 12 Volt or ground. A touch and hold to + 12 Volt

increases the load up to 10 Watt. Touching and holding the

blue cable to ground result in a decrease of the load down to

0 Watt. A flashing LED indicates the change of the load and

the preset number. The LED is permanent on if the minimum

or maximum value is reached and switches off when you

remove the blue cable and the adjusted value is stored in the

Vari Load as preset. The time between the lowest load value

and the maximum load value is about 20 seconds.

PART#

UNIT

914348 Each

6.30

APPAREL

Automatic Daytime running light switch

• This electronic relay contains 2 power outputs what can drive

60 Watt / each. A daylight sensor detect if the ambience light

is dark or bright and the device switch between daytime

running light and low beam, depending of the ambience light.

The switch time from daytime running light to low beam is

immediately for situations when you ride from a bright place

in a darker place. The switch time from low beam to daytime

running light is adjusted to 3 seconds in order to get the the

light sensitivity down against light reflections. You can adjust

and store the trigger value of the ambience light in 60 steps.

PART#

UNIT

914346 Each

Ground Split Terminal Splitter

Many electrical problems at the bike result from a bad

connection to the minus pole of the battery. The chassis is often

in use as minus pole, which is not the best connection due to

rust, paint or dirt at the contact screw. The Gnd-Split is a 4

pin divider that can be screwed directly to the minus pole of

the battery. It can split up to 4 cables with a maximum size of

AWG14.



Elektronicbox Version B

The B-Box is our response from some clients, who prefer an easy

mechanical implementation of the control box in a bike and who

don´t take care about a bit bigger size compare to our other

devices. The B-Box can be controlled with the standard ignition

switch. 8 implemented status led´s allow a fast check while the

installation or the adjustment of the different functions. A 20

Ampere inline fuse in the main line is integrated. However, the

outputs are short circuit protected and self resetting.

• Functions:

• Switch - output for parking light / Plate light / speedo etc.

• Ignition (with or without side stand switch control)

• Starter (with or without neutral switch control)

• Headlight with button or switch control

• Integrated flasher relay, control with buttons or switches

• Brake light with flasher option

• Horn



SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

Multi Flasher Plus Relay

This is a small flasher controller for pushbuttons in a small

package that will fit in every handlebar. This device is controlled

via 12 Volt inputs, what make it easier to implement in an

existing OEM harness if no minimal wiring is required. An auto

cancel function can be activated. It switch off the indicators after

a while if no button is pushed.



TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Flasher Merger

The Flasher Merger is connected between the 2 direction

indicators and the indicator led in the dashboard or speedo. Two

diodes are implemented. The module allows the control of one

indicator led for both flashers. The maximum load is 100 mA or

1,2 Watt. The module is waterproof potted what makes it simple

to install without the need to wire 2 diodes, insulate it and try to

get it waterproofed.



Minimal Indicator

The minimal indicator is a small microcontroller module and

a 3-color LED. The controller drives the different colors of the

LED and allows to indicate all necessary functions of your bike

with just one LED. Allows to display 2 or 3 events at the same

time easily. The small dimensions allows the implementation

inside the head light or even in the handle bar. Cleans up your

dashboard for a much cooler look.

• You can indicate the following functions with one LED:

• Flasher left and right

• High beam

• Neutral

• Oil Pressure



FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.31

EDITION 50

Multi Flasher C

Have you exchanged your oem indicators for LED devices and

are still having problems with the flashing frequency of the turn

signals being way too high? The Multi Flasher C (The C stands

for constant frequency) convert any flasher frequency or even

a permanent switched output of the OEM flasher relay to 90

flashes/minute.



Speedometer and Instrument Extension

Harness

NAMZ Speedometer / Tachometer Extension Harness 15“, Fits

Sportster 1999 – 2006, Dyna 1999 – 2006. Allows for easy

relocation of speedo/tach cluster when using tall risers.

• 15“ long OEM wire colors, terminals and connector

installed.

• Includes heat shrink tubing

• Rider must de-pin OEM connector for easy installation

6

Part#: 918456 , Fitment: 99-06 Sportster, 99-06 Dyna ,

Length: 381 mm, Unit: Kit , Qty.: 1

Woven Cloth Split Loom

Woven Cloth Split Loom, an easy to use spring-bound wire loom.

Available in assorted 4 ft and 8 ft.

• Perfect for harness repairs when fishing through heat-shrink is

not possible.

• Easy to use and cut

• Kit includes 3 sizes

Unit: Kit , Qty.: 1

PART# DESCRIPTION LENGTH MM

918453 For diameter

1/8“,1/4“,3/8“; 8‘ ft long

918452 For diameter:

1/2“,5/8“,3/4“; 4‘ ft long

2438

1219

OEM Replacement Accessory 12 Volt Power

Connection

OEM Replacement electrical power connection for

navigation, audio, heated grips or charging ports. Supplies

ground, switched and 12+ battery power without CAN/Bus

interference.

Part#: 918440 , Fitment: 18-24 Softail, 17-24 Touring,

17-24 Trike , OEM #: 69201599A , Unit: Each , Qty.: 1

Speedometer Extension Harness for Indian

Chief

Handlebar Control Xtension Harness, 15” longer than stock for

any size handlebar.

• Easy to install

• 100% plug-n-play

• Allows riders to install taller bars, taller risers or relocate their

speedometers on ALL 2022-Up Indian Chief Models

• Color matching wire, OEM connectors and covered with PVC

extruded tubing for a “finished” look

Part#: 924992 , Fitment: 22-24 Chief Dark Horse, 22-24

Chief Bobber Dark Horse, 22-23 Super Chief Limited, 24

Super Chief 111, 24 Super Chief Limited 116 , Length: 381


Female H9 and H11 to Male H4 Connector

Headlight Adapter Pigtail

Headlight adapter pigtail, with (female) H9 & H11 to

(male) H4 Connector. Fits all models with 7“ headlights

when using 2014-Up Road King dual LED headlight.

Part#: 918442 , Fitment: 86-13 Touring, (except

86-93 FLTC, 89, 91-95 FLTCU, 96 FLTCUI, 99-03, 07-09

FLTR, 99-06 FLTRI, 09 FLHX, 09 FLTRSE3, 10, 13 FLTRX,

11 FLTRUSE, 12 FLTRXSE, 13 FLTRU, 13 FLTRXSE2, 13

FLTRXSE2 ANV), 09-13 Trike, 15-16 FLRT, 12, 14-16 FLD,

13 FLD103, 86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-

00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN,

01-06 FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI,

06 FLSTFSE2, 10-12, 14-17 FLSTFB, 12, 14-17 FLS, 12

FLSTSE3, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV,

13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15

FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS , Unit: Each , Qty.:

1

6.32

APPAREL

SEATS &

TOURING

893338

Headlight & Passing Lamp Adaptor Harness

893349 For 90-04 models using 4” auxiliary lamps (each)

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

Front Turn Signal Harness

• Stainless steel braided and clear coated

893338 24”

893339 36”

893339

NAMZ Replacement Headlight Socket &

Terminal Kit

670874 Repl. OEM 72047-71

ELECTRICAL

EXHAUST

INTAKE

Turn Signal Extensions by Namz Cycle Products

A must when installing taller bars, these practical turn signal

extensions are the cleanest way to extend the wires and retain

factory colors.

Fits 96-13 Sportster, 96-11 Dyna, 96-10 Softail

664137 4”

664138 8”

Fits 16-24 Softail, (except 16-17 FLSTC, 16-17 FLSTN, 18-20

FLDE, 18-21 FLHC, 18 FLHCS 114, 19-20 FLHC 114, 21-24

FLHCS, 23 FLHCSANV)

897355 4"

897356 8"

897357 12"

897358 15"

MD Mini Solid State Relay for Hi-Low Beam

Very small solid state relay for use with push buttons to switch

between hi and low beam. Due to ist minimal size it can be

installed inside the headlight and switches from low to high

beam at the touch of a button. 30 mm x 30 mm x 15 mm (1.18” x

1.18” x 0.6”)

681573

H9 and H11 to H4 Connector Headlight

Adapter Pigtail

• NAMZ Headlight Adapter Pigtail, with mating H9 & H11 to H4

Connector

• Used when removing OEM dual-bulb Headlight and replacing

with standard 7“ universal LED light

Part#: 918441 , Fitment: 14-24 Touring, (except 15-16

FLTRUSE, 15-23 FLTRXS, 16-19 FLTRU, 18-24 FLTRX, 18-19,

21-24 FLTRXSE, 20-24 FLTRK, 22-23 FLTRXST, 22 FLTRKSE, 23

FLTRKSEANV, 24 FLTRXSTSE) , Fitment Note: H9 and H11 to

H4 Pigtail , Unit: Each , Qty.: 1

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

36 Pin ECMConnector

• ECM 36 Pin connector kit with connector, strain relief, retainer

lock, seal, & terminals.

PART# OEM # UNIT

897364 72078-00 Kit

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.33

EDITION 50

6

Speedometer & Instrument Extension Harness

for Sportster and Dyna

Speedometer / Tachometer Xtension Harness 15“. Allows for easy

relocation of speedo/tach cluster when using tall risers.

• 15“ long OEM wire colors, terminals and connector installed

• Includes heat shrink tubing

• Rider must de-pin OEM connector for easy installation

Part#: 918455 , Fitment: 07-13 Sportster, 07-11 Dyna ,

Length: 381 mm, Unit: Kit , Qty.: 1

Plug-n-Play 8 to 6 Position Multilock Rear

Fender Harness

• Simple to install

• 38 ¾ inches long

• A perfect matching OEM color-coded wiring harness

• Complete with OEM 8-position connector that attaches under

the seat and the 6-position connector that connects into the

rear taillight circuit board.

• All NAMZ wiring harnesses are made in the USA

Part#: 918437 , Fitment: 97-09 Touring, 99-03 Sportster, 97-

11 Dyna, 96-10 Softail , Fitment Note: Touring Models only

97-13 Electra Glide, 98-09 Road Glide, 06-09 Street Glide ,

Description: 8-Position Multilock to 6-Position Multilock ,


20“ Plug and Play Speedometer and

Instrument Extension Harness

Part#: 924881 , 15-16 FLTRUSE, 15-23 FLTRXS, 16-19 FLTRU,

18-23 FLTRX, 18-19, 21-22 FLTRXSE, 20-24 FLTRK, 22-23

FLTRXST, 22 FLTRKSE, 23 FLTRKSEANV , Unit: Each , Qty.: 1


Harness for M8 Softail

NAMZ Speedometer & Instrument Extension Harness, 100% Plugn-Play,

32“ long extended replacement.

• 16“ longer than the OEM/factory harness

• 100% Plug-n-Play and installs in minutes

Part#: 918464 , Fitment: 18-19, 23-24 FXBR, 18-20 FXBRS

114, 18 FXBRS 114 ANX, 18-20 FXBB, 19-20 FXDRS 114, 20-

24 FXST, 21-24 FXBBS, 21-22 FXBRS, 22-24 FXLRST , Length:

812.8 mm, Unit: Each , Qty.: 1


Harnesss

NAMZ Plug-n-Play Speedometer & Instrument Extension Harness,

36“ Fits 2014-Up Road King & Sportster, 2012-2016 Dyna, 2011-

Up Softail Models (except FXBB, FXBR, FXBRS). Allows for easy

relocation of speedometer and indicator lights.

Part#: 918454 , Fitment: 14-20 Sportster, 12-17 Dyna, 11-

24 Softail, (except 18-19, 23-24 FXBR, 18-20 FXBRS 114,

18 FXBRS 114 ANX, 18-20 FXBB, 20-24 FXST, 21-24 FXBBS,

21-22 FXBRS, 22-24 FXLRST), 14-18 FLHRC, 14 FLHRSE, 16-22

FLHR, 18-24 FLHRXS , Length: 914.4 mm, Unit: Kit , Qty.: 1

OEM Speedometer and Rear Fender Tri-Bar

Light Connector Kit

OEM Speedometer/Tachometer and rear Fender Tri-Bar Light

Connector Kit, includes (12) Female Terminals.

Part#: 918468 , Fitment: 04-20 Sportster, 04-17 Dyna,

04-24 Softail, 04-24 Touring, (except 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 09-24 Trike, 21-

23 Sportster RH, 21-24 Pan America, 17-20 Street , OEM #:

72130-04 , Unit: Pack , Qty.: 12

6.34

12 V Power Connection

PART# FITMENT OEM # UNIT

897365 14-16 Touring, 14-16 Trike 69200722 Kit

Replacement Headlamp H4 Pigtail

NAMZ replacement headlight H4 pigtail for all models with H4

headlight harnesses, includes connector, heatshrink, installed

terminals on #16-gauge wire at 6“ long.

Part#: 918443 , Field of Application: For all Models with H4

Light Socket. , Unit: Each , Qty.: 1

APPAREL

893233

SEATS &

TOURING

670856 893223

FOOT

CONTROLS

893231

893229

893222

HAND

CONTROLS

LIGHTING

Fairing Radio Plugs

670856 23-Position radio plug (OEM

72382-98BK)

893223 23-Position radio plug Header

plug

893222 35-Position radio plug (OEM

72384-06BK)

893221 Female terminals (OEM 72381-

98) Pack 50

893228

Radio Amplifier Accessories

During your amplifier installation, you

may want have these items. Our noise

filter will reduce any buzz in your speakers

caused by your charging system. A Hi/

Low module is perfect for cleaner signal

when using OEM radio with an amp. RCA

cable is perfect when adding an amp or

component.

893231 In-Line RCA Cable noise filter for

engine noise reduction 95-24


893228 Hi to Low level converter for

OEM radios with amplifiers 95-24


893233 3-Foot Gold plated RCA cable,

oxygen free wire

893230

Radio Amplifier Installation

When installing an external power

amplifier on your motorcycle you will

need either one of our wiring kits. The

#10 gauge kit is intended for up to

600-watts and the #8 gauge kit is for up

to 900-watts. Both come with everything

you need to install an amp properly the

first time!

893229 #10 Wire, 2 RCA cables, fuse, holder

and terminals

893230 #8 Wire, 2 RCA cables, fuse, holder

and terminals

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

AMP Power Plug Kit

893232 AMP Power plug kit

893286

893287

OEM Speaker Connectors

This is the ones used by the factory since 1994.

893286 187” Female terminal (pack 20),

(OEM 72294-94) 95-24 Touring,

09-24 Trike

893287 25” Female terminal (pack 20),

(OEM 77290-94) 95-24 Touring,

09-24 Trike

Rear Speaker Harness

To use with the stock HD radio, perfect for

rear speakers (flash required)

893234 Rear speaker harness, HD radio only

OEM HD Radio Connector/BCM

Connector Kit with mating

terminals in (3) gauge sizes

OEM 2014-Up Harley Davidson Radio

Connector/BCM Connector Kit with

mating terminals in (3) gauge sizes.

Part#: 918469 , Fitment: 14-24

Touring, (except 23-24 FLHXSE,

23-24 FLTRXSE, 24 FLHX, 24 FLTRX,

24 FLTRXSTSE), 14-24 FLHTCUTG, 18

FLHTCUTG ANV, 20-22 FLHTCUTGSE,

23-24 FLTRT , Fitment Note: Only for

HD models equipped with OEM radio

, OEM #: 69200193 , Unit: Kit , Qty.: 1

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.35

EDITION 50

6

Switch Controller for

Can/Bus Models

So you you want to change

out your stock handlebar

controls on your 11-17 Softail

or 12 & 17 Dyna? This module

allows you to choose any

brand switch assembly you

want! Attach the wiring

directly to our color matching

wired module, plug in the

other end into the wiring

harness of the bike and it´s

done!

890141 14-24 Bagger models,

except Helix

Note: Will not work with keyless ignition

models.

O2 Sensor Extension/

Adapter Kit by Namz

Cycle Products

Got your eye on that perfect

exhaust system for your

Bagger but it only fits up to

2009? Well the crew at Namz

has solved that problem with

this slick new kit. It’s fast and

easy to install; simply plug it in

between the front O2 sensors

and the OEM wiring harness

and install the reducer plugs

into the O2 sensor ports on

the exhaust header and thats

it your done! Also works for

2012 and later Softails and

Dynas.

664180 O2 Sensor extension/

adapter for all 10-17

Touring models and

12-17 Softails and

Dynas

664190 O2 Sensor extension/

adapter for all 10-17

Touring models

and 12-17 Softails

and Dynas without

connectors

893361 893359 664183

Inline Enrichment Devices

A simple plug-n-play fuel management upgrade for your

bike. Nightrider´s unique patented design works with your

existing OEM O2 sensor and ECM allowing richer fuel mixtures.

Recommended for stock bikes and those with exhaust/intake

changes.

INLINE ENRICHMENT DEVICES TARGET AFR AFR SETTING

893361 14.2:1 Fixed

893359 14.3:1 Fixed

664183 13.9:1 Fixed

MODEL/YEAR V-ROD DYNA SOFTAIL TOURING

2006 N/A 893359 N/A N/A

2010 N/A N/A N/A

664183

2011 N/A N/A N/A 664183

2012 664183 664183 664183 N/A

681983

‘VOES’ Switches

These are Original Equipment

parts. Replacement vacuum

operated electric switch.

681984

895451 Fits XL / XLS / XLX

83-85, FXR 48-90 (repl.

OEM 23557-83)

895452 Fits FXST, FLST, Dyna,

FXR 91-95 (repl. OEM

26566-91)

75295 Fits Softail, FXR and

Dyna Glide models

from 91-95 (repl. OEM

26566-91)

75294 Fits Softail and

4-speed FX models

from 84-90 and

Sportster models from

86-93 (repl. OEM

26558-84)

75293 Fits FXR models from

84-90 and Sportster

models from 83-85

(repl. OEM 26557-83)

Wiring Bypass

Connector from Pistor

This little item makes the

usage of aftermarket exhausts

or aircleaner systems possible.

It overrules the engine

electronic, warning lights will

not come up after mounting

aftermarket systems.

681983 Bypass connector for

aftermarket exhaust

systems

681984 Bypass connector for

aftermarket aircleaners

6.36

APPAREL

664120

SEATS &

TOURING

FOOT

CONTROLS

Throttle-by-Wire

Extension Harness by

Namz Cycle Products

Namz new Throttle-by-Wire

harness is ‘plug-n-play’ and

a no brainer when installing

taller handlebars. It is longer

than stock and is one size fits

ALL handlebars. Simply remove

the OEM harness and plug this

one in. It comes complete with

OEM connectors installed for

simple installation.

Heated Grip Wiring

Extension Kit

The must for models with

taller handlebars.

893352 96-07 models

Universal Tachometer

Harness

Compatible with most factory

and aftermarket tachometers

893428 Universal

893334

HAND

CONTROLS

LIGHTING

ELECTRICAL

664120 Fits all Touring models

from 08-13

893335

EXHAUST


(except 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX,

24 FLTRXSTSE), 16-24 Trike

INTAKE

897359 4" Long

897360 8" Long

897361 12" Long


(except 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX,


897362 15" Long

893331

Universal Headlight

Harness

• Harness fully assembled

• With a clear layer PVC

893423 Universal

CAN/Bus Handlebar

Switch Harness

Same harness like OEM but

much longer to install the

tallest ape hangers without

cutting, splicing, soldering or

messing with the new CAN/Bus

BCM module. Lenght 48”.

893333 14-24 Touring, (except

14-18 FLHRC, 14 FLHRSE,

16-22 FLHR, 18-24

FLHRXS, 23-24 FLHXSE,

23-24 FLTRXSE, 24 FLHX,

24 FLTRX, 24 FLTRXSTSE),

14-24 Trike, (except 15-24

FLRT)

893336

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

893332

Handlebar Wiring

Covers

• Use it when you making

your own wiring

• Includes two pieces of

braided steel wiring hose,

black & clear heat shrink

and four Namz logo shrink

ends.

893331 For internal wiring

893332 For “stock” external

wiring

Handlebar Wiring

Harness Extensions

for CAN-BUS models

by Namz Cycle

Products

These new plug-n-play wiring

harness extensions will allow

for an easy install of tall

handlebars on the new CAN-

BUS equipped Softails. Fits

14-20 Sportster, 12-17 Dyna,

11-24 Softail

664185 Extension 4 inch

length


length


length


length

Momentary Switch

Converter Module

Allow you using momentary

(ON) switches for headlights

and a run switch the ability to

toggle as a HIGH/LOW switch

and a kill, ON/OFF switch. OEM

color matching wires, heat

shrink and instructions.

893329 Switch converter

module


893337

Universal Handlebar

Wire Extensions

Just cut and solder it!

Terminals already installed,

24” long, matching colors and

heat shrink included.

893334 Touring 96-06 models

only

893335 All models 96-06 (except

Touring)

893336 Touring 07-13 models

only

893337 All models 07-13 (except

Touring) 893334

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.37

EDITION 50

6

OEM Replacement Engine Coolant Temperatur

Sensor

• These are designed to be a direct replacement for the OEM

part

Part#: 920491 , Fitment: 02-13 V-Rod , OEM #: 32315-01 ,


OEM Replacement Engine Temperature Sensor

• These are designed to be direct replacement for the OEM part

Part#: 920490 , Fitment: 04-17 Dyna, 01-17 Softail, 99-16

Touring, 09-16 Trike , Fitment Note: Only EFI models , OEM

#: 32446-99 , Unit: Each , Qty.: 1

Plug-n-Play Rear Fender Harness



• Complete with OEM 6-position connector that connects under

the left side cover and comes with the 12-position connector

that connects into the tri-bar light in the rear fender fascia.

• All NAMZ wiring harnesses are made in the USA

Part#: 918439 , Fitment: 14-24 Touring, (except 24

FLTRXSTSE) , Description: OEM 6-Position Molex with

12-Position Fender Fascia Connector , Unit: Each , Qty.: 1

Engine Temperature Sensor

• Direct replacement engine temperature sensor

Part#: 930493 , Fitment: 04-17 Dyna, 01-17 Softail, 99-16

Touring, 09-16 Trike , Fitment Note: Only EFI models , OEM

#: 32446-99 , Unit: Each , Qty.: 1

Plug-n-Play 6 Position Molex to 10 Position Tri

Bar Light Connector Rear Fender Harness



• Complete with OEM 6-position connector that connects under

the left side cover and comes with the 12-position connector

that connects into the tri-bar light in the rear fender fascia.

• All NAMZ wiring harnesses are made in the USA!

Part#: 918438 , Fitment: 10-13 FLHX, 10, 13 FLTRX, 13

FLTRU , Description: OEM 6-Position Molex connector to

12-Position Connector, Tri Bar Light in rear Fender Fascia ,


6.38

Coolant Temperature Sensor

• Direct replacement coolant temperature Sensor

Part#: 930337 , Fitment: 02-13 V-Rod , OEM #: 32315-01 ,


918435 918436

Plug-n-Play Rear Fender Harness Adapter

(Fender Fascia)

Rear fender harness adapter, intended to adapt OE rear fender

harness from 97-13 Road King, Electra Glide, 98-09 Road Glide

and 06-09 Street Glide to a OE rear fender harness from a 10-20

Road Glide or Street Glide. 100% plug-n-play. A must when using

a late model fender fascia.

Fitment: 97-13 Touring, (except 10-13 FLHX, 10 FLHXSE, 10,

13 FLTRX, 11 FLTRUSE, 11 FLHXSE2, 12 FLHXSE3, 12 FLTRXSE,

13 FLTRU, 13 FLTRXSE2, 13 FLTRXSE2 ANV) , Unit: Each ,

Qty.: 1

PART#

DESCRIPTION

918435 When using 10-13 Fender Fascia Light

918436 When using 14-20 Fender Fascia Light

APPAREL

664132

893357

893364

SEATS &

TOURING

FOOT

CONTROLS

893355

893367

HAND

CONTROLS

893356

LIGHTING

ELECTRICAL

Hot Box Accessory Wiring

Harnesses by Namz Cycle

Products

NHB-B01

A replacement rear lighting harness for

both taillight and rear turn signals with

Namz ‘plug-n-play’ technology. Features

two separate detachable harnesses for

each saddlebag with RUN, TURN SIGNAL

and BRAKE functions. This module is

perfect for adding a custom taillight

to your fender and turn signals to your

saddlebags.

664132 Fits all Big Twins from 96-13

(except 11-13 Softails and 12-13

Dynas)

NHB-B02

Features two separate detachable

harnesses for each saddlebag with RUN,

TURN SIGNAL and BRAKE functions.

Designed to run with your stock rear

lighting harness, just unplug your stock

harness and plug the Namz unit in

between and your done! This module is

perfect for relocating your turn signals to

your saddlebags or if you just want to add

some custom lighting to your saddlebags.



Dynas)

664141 Fits 10-13 FLHX and FLTR models

NHB-B03

This unit utilizes a load equalizer and

provides a detachable right & left turn

signal harness for each saddlebag that

will operate both standard incandescent

or LED bulbs. Designed to run with your

stock rear lighting harness, just unplug

your stock harness and plug the Namz

unit in between and your done! This

module is perfect for adding custom

lighting to your saddlebags while keeping

your all your OEM lights.



Dynas)

664142 Fits 10-13 FLHX and FLTR models

Power Port

The perfect source for additional switched

power. Remove the seat of your Touring

and plug in this Y-Adaptor or charger port

that will allow you to charge a phone,

iPod or GPS.

893355 For NON CAN-Bus models

893356 14-20 Touring, 11-20 Softail,

12-17 Dyna, 14-20 Trike, 14-20

Sportster

893357 With dust cover, for all CAN-Bus

models

893289

893290

893145

Power Connectors

Used for accessory power and come with

terminals


893290 1-Position female 04-13 Sportster,

05-11 Dyna, 04-09 Softail, 04-13

Touring, 09-13 Trike, 07-17 V-Rod

(OEM 72260-04)

893145 18-Position, on FX 12-17 models

(OEM 72664-12)

4-Way ATC Fuse Block

Power-Up ONLY

893366

893368

893369

• A quick-disconnect harness to power-up

a Tour-Pack

• Plug in between rear fender harness

and connect into your Tour-Pack

• Connector is exposed behind the seat

for easy removal

893364 Touring 96-13 (except Street &

Road Glides 10-13 and CVO or SE

09-13)

Power-Up and Run-brake-turn Module

• This EZ harness will give you running,

brake & turn signal module inside your

Tour-Pack

• A few simple modifications to the Tour-

Pack wiring and attach the harness with

a few crimps.

893367 Touring 96-13 (except Street &

Road Glides 10-13 and CVO or SE

09-13)

893368 Street & Road Glides 10-13 ONLY

893369 10-13 CVO Touring models

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.39

EDITION 50

6

Ready to Install Handlebar Wire Extension Kits

by Namz Cycle Products

All the Items needed to successfully extend the wiring to a set

OEM handlebar switches. Harnesses include both male and

female terminal crimped on each end. All kits include wire

heat shrink and color matched wire. 08-17 Touring models with

Electric throttle require an additional wire kit. Made in the USA

For all 07-13 FLHT/FLHX/

FLHR/FLTR Models (26 wire)

664100 4-Inch kit

664101 8-Inch kit

664102 12-inch kit

664103 15-inch kit

For all 96-06 FLHT/FLHX/

FLHR/FLTR Models (24 wire)

664108 4-Inch kit

664109 8-Inch kit

664110 12-inch kit

664111 15-inch kit

For all 07-13 Models

(except Touring Models and

11-up Softails and 12-up

Dynas) (14-wires)

664104 4-Inch kit

664105 8-Inch kit

664106 12-inch kit

664107 15-inch kit

For all 96-06 Models

(except FLHT/FLHX/FLHR/

FLTR Models) (12-wires)

664112 4-Inch kit

664113 8-Inch kit

664114 12-inch kit

664115 15-inch kit

Additional Kits

For all 08-14 Touring

Models with ‘Throttle by

Wire’ Electric Throttle

664116 4-Inch kit

664117 8-Inch kit

664118 12-inch kit

664119 15-inch kit

923243 923244

923245

Throttle Position Sensor

• Direct replacement throttle position sensor


PART# FITMENT OEM #

930330 06-07 Touring, 06-17 Dyna, (except 16-17

FXDLS), 06-15 Softail, (except 11 FLSTSE2, 12

FLSTSE3, 13-14 FXSBSE, 14-15 FLSTNSE)

930331 07-20 Sportster, 02-05 Touring, 04-05 Dyna,

01-05 Softail

Manifold Absolute Pressure Sensor (MAP)

• Direct replacement manifold absolute pressure sensor


27659-06

27629-01

PART# FITMENT OEM #

930335 96-97 FLHRI, 96 FLHTUI, 96 FLTCUI, 97-98

FLHTCUI, 98 FLHRCI

930333 04-06 Sportster, 98-03 XL1200S, 99-17 Dyna,

(except 16-17 FXDLS), 01-15 Softail, (except

11 FLSTSE2, 12 FLSTSE3, 13-14 FXSBSE, 14-15

FLSTNSE), 99-07 Touring, 02-17 V-Rod

930492 07-20 Sportster, 16-17 Softail, 11 FLSTSE2, 12

FLSTSE3, 13-14 FXSBSE, 14-15 FLSTNSE, 08-16

Touring, 09-16 Trike, 16-17 FXDLS

32424-95

10220075,

32316-99,

32416-10,

32417-10,

32424-98,

32424-99

32319-07,

32319-

07A

OEM-Replacement Twist Grip Sensor

• These replacement twist grip sensors are an exact replica of

the OEM replacement without the small green connector in

the handlebar

• 100% plug-n-play

• Include the heated grip connector


PART# FITMENT OEM #

923243 08-13 Touring 32310-08

923244 14-15 Touring 32310-08A

923245 16-24 Touring, (except 23-24 FLHXSE,

23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24

FLTRXSTSE), 16-24 Trike, 16-17 Softail, 16-

17 FXDLS

32700050A

6.40

APPAREL

SEATS &

TOURING

920501 920502

FOOT

CONTROLS

HAND

CONTROLS

CAN/Bus Ignition Switch Converter Module

CAN/Bus ignition switch converter module. Allows the use of any

aftermarket Ignition or accessory switch on all Harley CAN/Bus

models. (not for use on key-less models)

Part#: 918458 , Fitment: 14-20 Sportster, 12-17 Dyna, 11-24

Softail, 14-24 Touring, 14-24 Trike , Fitment Note: Except

models, equipped with key-less go , Unit: Pack , Qty.: 10

920503 920504

LIGHTING

ELECTRICAL

920493 920494 920495

920497

920498

920496

920499

OEM Replacement Throttle Position Sensor

• These are designed to be a direct replacement for the throttle

position sensor



920501 98-01 Touring Early Magneti- 27271-95

Marelli Injection

920502 07-20 Sportster, 02-05

27629-01

Touring, 04-05 Dyna, 01-

05 Softail

920503 02-17 V-Rod 27975-01

920504 06-07 Touring, 06-17 Dyna,

(except 16-17 FXDLS),

06-15 Softail, (except 11

FLSTSE2, 12 FLSTSE3, 13-14

FXSBSE, 14-15 FLSTNSE)

27659-06

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

920500

DRIVELINE

OEM Replacement Speed Sensor

• These are designed to be direct replacement for OEM speed

sensors


PART# FITMENT FITMENT NOTE

920493 95-05 Dyna, 94-96 FLHR

920494 95-03 Sportster, 97-01 M2,

97-98 S1, 97-99 S3, 99-01

X1

920495 96-99 Softail

920496 00-03 Touring, 97-99 FLHR,

98-99 FLHRCI

920497 00-06 Softail, 04-06 Touring

920498 02-04 V-Rod

920499 04 Sportster

920500 05-20 Sportster, 06-17

Dyna, 07-24 Softail, 07-20

Touring, 22 FLHX, 22 FLHR,

22-23 FLTRX, 23 FLHXS, 09-

20 Trike, 05-17 V-Rod

22-23 FLHR, FLHX, FLTRX

without ABS

920487 920488

OEM Replacement MAP Sensor



PART# FITMENT OEM #

920487 04-06 Sportster, 98-03 XL1200S, 99-17 Dyna,

(except 16-17 FXDLS), 01-15 Softail, (except

11 FLSTSE2, 12 FLSTSE3, 13-14 FXSBSE, 14-15

FLSTNSE), 99-07 Touring, 02-17 V-Rod

920488 07-20 Sportster, 16-17 Softail, 11 FLSTSE2, 12

FLSTSE3, 13-14 FXSBSE, 14-15 FLSTNSE, 08-16

Touring, 09-16 Trike, 16-17 FXDLS

32316-99,

32416-10,

32417-10

32319-07

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.41

EDITION 50

920489 895428

920475 920476

6

OEM Replacement Cam Sensor

• These are designed to be a direct replacement part


PART# FITMENT OEM #

920475 99 Dyna, 99 Touring 32496-99

920476 00 Dyna, 00-01 Touring 32793-00

OEM Replacement Intake Air Control (IAC) Unit

• These are designed to be a direct replacement for the OEM

part

Part#: 920492 , Fitment: 06-17 Dyna, (except 16-17 FXDLS),

06-15 Softail, (except 11 FLSTSE2, 12 FLSTSE3, 13-14

FXSBSE, 14-15 FLSTNSE), 06-07 Touring , OEM #: 27658-06 ,


920511

OEM Replacement Oil Pressure Sensor



PART# FITMENT OEM #

920489 99-16 Touring, (except 99-03, 07-10, 13, 16 74438-99A

FLHR, 99-06 FLHRCI, 99-00, 03, 07-10 FLHT,

00-02, 04-06 FLHRI, 02 FLHRSEI, 03-04, 06

FLHTI, 04-06 FLHRSI, 07-16 FLHRC, 07 FLHRS,

07 FLHRSE3, 07-10, 13 FLHTP, 08 FLHRSE4,

13 FLHRSE5, 14 FLHRSE), 09-16 FLHTCUTG,

13 FLHTCUTG ANV

920509 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 26561-84

88-93 FLHS, 94-98 FLHR, 98 FLHRCI

920511 87-98 Touring, (except 89-93 FLHS, 94-98 74406-87

FLHR, 98 FLHRCI)

930338

930339

Idle Air Control (IAC) Unit

• Direct replacement idle air control unit (IAC)


PART# FITMENT OEM #

930338 06-17 Dyna, (except 16-17 FXDLS), 06-15

Softail, (except 11 FLSTSE2, 12 FLSTSE3, 13-

14 FXSBSE, 14-15 FLSTNSE), 06-07 Touring

930339 04-05 Dyna, 01-05 Softail, 01-05 Touring,

02-17 V-Rod

27658-06

27628-01,

27628-01A

Fuel Pressure Regulator

• Direct replacement fuel pressure regulator (for Magneti

Marelli Fuel Injection)

Part#: 930357 , Fitment: 95-01 Touring , OEM #: 27219-95 ,


893307

Starter Relay

• 30-Amp

893308 Socket & terminal kit (OEM 9937, 72046-79)

893307 Heavy Duty (OEM 31504-91A)

893308

6.42

Fuel Pressure Regulator for Touring (Magnet

Marelli EFI)

• Made from finest materials

• Designed for high quality and reliability

Part#: 928089 , Fitment: 95-01 Touring , Fitment Note: Only

for EFI models , OEM #: 27219-95 , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE PART#

95-01 Touring Only for EFI models 928089

Starter and Brake Light Relay with Diode

This is an Original Equipment part. Fits the starters on all models

from late 93-10, and the brake light circuit on Touring models

from 91-10.

75217 Replaces OEM 31504-91A

APPAREL

SEATS &

TOURING

Standard Micro

System Relay

A replacement for the original

equipment micro sized unit

fitted for all big twins from

00-15

617525 Replaces OEM 31511-

01A

Daytona Twin Tec

Ignition Power Relay

Kit

This relay kit improves or

eliminates the voltage drop on

big inch or high compression

motors with single fire

ignitions.

684962 Power relay kit

17050

17152

17060 17059

17293

17518

895443

17294

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

25004

Standard Motor Products

Top-quality electrical parts for a wide variety of Harley-Davidson

applications from the manufacturer of Blue Streak Performance

Products. Sold each.

EXHAUST

Micro Starter Relay

with Diode by Standard

Motor Products

A replacement for the Original

Equipment micro-sized unit fitted

to all Big Twins from 00-15. Sold

each.


00A

Starter Relay

This starter relay replaces OEM

31506-79 and fits most Big

Twin and Sportster models

from 80-99. Sold each.

688590 Starter relay 80-99

models (repl. OEM

31506-79)

24998

Starter Relays

Starter relays used on most

models 73-93. Fits FL and

FX models 73-79, Sportster

models 74-79 and all models

80-85 using round plastic,

terminal-style relay.


73A

Fits all models 80-93 using

either a metal or plastic square

bodied ‘plug’ style relay.

24998 Replaces OEM

31506-79B

Starter RelaysFits all 04-15

models


04, 31586-07 04-13

Sportster, 04-24


Fits all 80-99 models using a metal

or plastic square bodied ‘plug’

style relay.


79B

Same as CC #17060 but with an

improved ‘weather-proof’ skirt to

protect the connector block.


79B

Fits FL and FX models 73-79,

Sportster models 74-79 and all

models from 80-03 using a round

plastic, terminal-style relay.


73A

Micro Starter Relay with

Diode

A replacement for the Original

Equipment micro-sized unit fitted

to all Big Twins from 00-15.


00A

Starter/Brake Light Relay

with Diode

Works with starters on all models

from 93-10, and the brake light

circuit on Touring models from

91-10.


91A

Starter Relay Connectors with

Pigtail Harness

Connectors for use with CC #’s

17059 and 17060. Also fits CC

#’s 17518 and 75218 relays if

orange wire is not used.

17293 Five lug

17294 Four lug

Circuit Breakers

17064 15 amp (repl OEM

74587-94)

17063 15 amp (repl. OEM

74589-73)


74599-77B)


74600-97A)

17061 50 amp (repl. OEM

74600-94)

19295 Circuit breaker clips/

rivets. Pack of 10.

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

Starter Relay Custom

895443 High/Lowbeam control

for one wire button

switch 17060

SHEETMETAL

INSTRUMENTS

& GAUGES

Late Model XL Starter

Relay by Blue Streak

Replacement starter relay for

late model Sportsters. Sold

each.

668347 05-09 XL starter relay

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.43

EDITION 50

17715

12287

6

Starter Relay Cover

A chrome relay cover complete

with mounting spacers and

screws that fits all 4-speed FL

models from 65-84.


68T

Goodridge Brake

Light Switch

Hydraulic switch features wire

leads for your stoplight. Fits

most Big Twin and Sportster

models. Ideal for many

applications (7/8" hex with

1/8" NPT thread)

27052 Goodridge brake

light switch

25505 25506

Accel Hydraulic Brake

Switches

Top-quality Accel rear brake

light switches for most models.

They feature heavy-duty

contacts and brass terminals.

Fits ServiCar from 51-73 and

58-70 FL models.


51A

Fits Big Twin models from

71-up (except 08-Up Dyna

models), and Sportster models

from 79-03.


51A

895446

Hydraulic Brake

Switches

Top-quality hydraulic rear

brake light switches for most

models. Heavy-duty contacts

and quality brass terminals.

17716 79-20 Sportster,

68-84 FL Shovel,

71-84 FX Shovel,

85-94 FX Model,

84-24 Softail, 85-24

Touring, 02-17

V-Rod, 91-07 Dyna,

21-24 Sportster

RH, (except 22-24

Nightster RH975,

23-24 Nightster

Special RH975S),

21-24 Pan America.

(repl. 72023-51A)

Fits ServiCar from 51-73 and

58-70 FL models.

17715 Replaces OEM

72002-51AFits FL

and FX models 73-79,

Sportster models 74-79

and all models from

80-03 using a round

plastic, terminal-style

relay.

895446 79-20 Sportster,

68-84 FL Shovel,

71-84 FX Shovel,

85-94 FX Model,

84-24 Softail, 85-24

Touring, 02-17

V-Rod, 91-07 Dyna,

21-24 Sportster

RH, (except 22-24

Nightster RH975,

23-24 Nightster

Special RH975S),

21-24 Pan America

Replaces OEM 72023-

51D

Brake Light Switch

Banjo Bolt by

Goodridge

Banjo bolt with pressure

switch built into it. Simplifies

the rear brake by eliminating

the tee and pressure switch

and creating a single brake

line system. Sold Each.

14137 3/8"-24

14138 7/16"-24

26440

26448

26429

26447

26435

Chrome Replacement

Stop Light Switches

Stamped steel construction

and heavy-gauge support

plates. Ideal for replacing

worn stock parts during a

restoration project or when

building a ground-up full

custom.

26447 Fits FX, FXE and FXS

models 73-77 (repl.

OEM 72005-73A)

push-off style

26448 Fits Sportster models

75-76 (repl. OEM

72004-75) pull-on

style

26435 Fits Big Twin models

37-57, 45" WL

models 37-57 and

Servicars 37-50 (repl.

OEM 72003-34T)

pull-on style


67-74 (repl. OEM

72004-70T) push-off

style

26429 Fits Sportster and K

models 52-66 (repl.

OEM 72004-52) pushoff

style

Universal Stop Light

Switch

Sold on a display card of 10, or

individually.

12287 Sold each

12288 Card of 10

Rear Brake Switch

Harness

Stainless braided rear brake

switch harness.

893425 Rear brake Harness

Replacement

Hydraulic Stoplight

Switch

Part#: 922741 , Fitment:

79-20 Sportster, 68-84 FL

Shovel, 71-84 FX Shovel,

85-94 FX Model, 84-24

Softail, 85-24 Touring,

02-17 V-Rod, 91-07 Dyna,

21-24 Sportster RH,

(except 22-24 Nightster

RH975, 23-24 Nightster

Special RH975S), 21-24 Pan

America , OEM #: 72023-

51E , Unit: Each , Qty.: 1

6.44

APPAREL

SEATS &

TOURING

Stoplight Switch

• Top quality hydraulic switch

• Heavy duty contacts

• Top quality brass terminals

17716 17715 895446

• Reliable performance in the most severe environments


928095

PART# FITMENT OEM #

17716 79-20 Sportster, 68-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 84-24 Softail, 85-24 Touring, 02-17 V-Rod, 91- 72023-51A

07 Dyna, 21-24 Sportster RH, (except 22-24 Nightster RH975, 23-24 Nightster Special RH975S), 21-24 Pan America

17715 58-65 Panhead, 66-68 FL Shovel, 51-73 Servi Car 72002-51A

895446 79-20 Sportster, 68-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 84-24 Softail, 85-24 Touring, 02-17 V-Rod, 91- 72023-51D

07 Dyna, 21-24 Sportster RH, (except 22-24 Nightster RH975, 23-24 Nightster Special RH975S), 21-24 Pan America

928095 08-17 Dyna 72026-08A

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

17901 17902 25536 658444

INTAKE

ENGINE

Transmission Neutral Switch

• Manufactured to very stringent specifications

• Proper function and long life in the toughest conditions

• Featuring hardened, high carbon steel stems

• Maximum wear resistance and durability


658445 84899 928090 928091

PART# FITMENT OEM #

17901 71-78 FX Shovel 71507-71

17902 65 Panhead, 66-78 FL Shovel 71507-65

25536 59-64 Panhead, 86-98 Sportster, 87-94 FX Model, 91-97 Dyna, 87-97 Softail, 87-97 Touring, 97-98 M2, 97-98 S1, 33900-59

97-98 S3

658444 01-05 Dyna, 00-06 Softail, 01-06 Touring 33904-00

658445 98-00 Dyna, 98-99 Softail, 98-00 Touring, 02-17 V-Rod 33902-98

84899 79-84 FL Shovel, (except 80-84 FLT, 81-84 FLTC), 79-84 FX Shovel, (except 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 33901-79

FXRSDG), 85-86 FX Model, 84-86 Softail

928090 99-20 Sportster, 99-02 M2, 99 S3, 99-02 X1, 03-10 XB 33900-99

928091 07-17 Dyna, 07-24 Softail, 07-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLTRXSTSE), 09-24 Trike 33926-06B

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.45

EDITION 50

895426

895427

6

895428

Oil Pressure Switch

895426 For FX/FXE/FXS1200/FXEF80/FXS80/FXB80/FXWG80 71-84,

FLT/FLHT 80-83, FL 80-92, FXR 82-83 (repl. OEM 26552-

72)

895427 For 77-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02

X1, 03-10 XB (repl. OEM 26554-77,-77D)

895428 For FLH/FLT/FXR 84-85, FX 84-86, Softail 84-99, FXR 86-92,

Dyna 91-99 (repl. OEM 26561-84)

Chrome Oil Pressure Sender Cover Kit by

Kuryakyn

This rubber-lined, easily-installed, die-cast cover kit fits all

Evolution Big Twins from 84-99 (except models equipped with

2-terminal sending units).

48265 Sold each

15103

12943

Accel Oil Pressure Switches

American-made units with heavy-duty contacts, brass ferrule,

thermoplastic insulator and a bright finish.

Fits Sportster and K models from 54-76 and Big Twins from 41-84

(except Evolution models).


Fits 77-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 03-10

XB

Twin Cam Oil Pressure Switch

Oil pressure switch for all Twin Cam models and V-rod models

688635 Oil pressure switch (repl. OEM 26561-99)

Universal Switch Plates

Sold on a card of 12.

15103 Key switch bracket

12943 Single mount hole

Replacement Transmission Neutral Switch


PART# FITMENT COLOR DESCRIPTION OEM #

922740 99-20 Sportster Silver One Pin 33900-99

922742 01-05 Dyna, 00-

06 Softail, 01-06

Touring

Black Two Pin 33904-00

Oil Pressure Switch

Quality replacement oil pressure switch for XL and K models

54-76 and Big Twin (except Evo) 41-84. Replaces OEM 26552-72,

sold each.

688594 Oil pressure switch (repl. OEM 26552-72)

Marine-Grade Key-Start Ignition Switch

Marine-Grade, Key-Start Ignition Switch with polished stainless

and knurled jam-nut. Complete with 2 keys and brass screws.

Includes optional momentary switch when you push in the key

while key is on!

• High impact recoil key start switch

• Includes:

• Brass screws

• Polished stainless-steel and knurled panel nut

• 2 keys

Part#: 925143 , Unit: Kit , Qty.: 1

6.46

APPAREL

12251 12286

SEATS &

TOURING

Chrome Ignition Switches

Fits Sportster models 75-77 and FX models

73-77.

12251 Ignition switch (repl. OEM 70124-

75)

Fits FX models from 78-85, Sportster

models from 78-93 and FXR

models from 82-93.

Universal Ignition Switch

• 3 Position

• Mounting Stem Diameter 5/8” and

length 7/16”

• 12V 5/10 AMP

895420 Universal ignition switch

Ignition Switch

Direct replacement for Dyna 93-02, FLHR

94-02 and Softail 96-02 (repl. OEM 71313-

96, 71501-93)

895421 Ignition switch

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING


77T)

ELECTRICAL

Three-Way Universal Ignition

Switch

12289 Popular as an OEM replacement

Heavy-Duty Ignition Switch

A top-quality, heavy-duty ignition switch

for all Softail, FXWG and FL models from

73-95 (except Dyna Wide Glide models).

Also compatible with all of our custom six

post switch dash covers.


73T)

Late Style Ignition Switch

Assemblies

Switch assemblies feature round tumbler

style keys for added security and simple

hook-ups.

EXHAUST

INTAKE

ENGINE

Mini Ignition Switch

Two position mini ignition switch for

custom applications. Includes two keys.

Sold each.

688193 Mini ignition switch

Heavy-Duty Electronic Ignition

Switch

Totally electronic switching eliminates

the troublesome pole-to-bar contacts of

Original Equipment switches. The 6-pole

terminal pattern is highly-resistant to

vibration and corrosion. Includes two

reversible keys and both the early and

late-style ignition switch caps.

26455 Fits all models from 36-95 (except

Dyna Wide Glide models)

Fits Sportster models from 75-03, FXR

models from 82-99, Dyna Glide models

(except FXDWG) from 91-03, and FX

models from 73-03 (except FXWG and

FXST) as well as custom applications.

49211 OEM-style barrel key ignition

switch, replaces OEM 71428-90B

Replacement for Dyna Glide models

(except FXDWG) from 91-93 as well as

many custom applications.


GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Custom Ignition Switch

Made of durable plastic which makes it

waterproof. Features off, run and spring

return start with push button feature. Can

be used without a starter relay. Made in

USA.

12203 Ignition switch, water resistant,

flat switch style with spring-return

start, 12-volts

FORKS &

SHOCKS

SHEETMETAL

Oil Sending Harness

Slide over the 18-gauge wire.

893424 For all EVO engines

Convertible Ignition Switch

5-post ignition switch and lock assembly

complete with both styles of caps.


36TA)

Replacement Ignition Switch Cap

Late die-cast style. Includes pins. Pack of 10.

25538 Switch cap

Side Hinge Ignition Switch

Chrome side hinge ignition switch with

barrel style key. Fits FXDWG 93-11; Softail

models 96-10; and Road King models 94-

13. Includes two keys.

17717 Replaces OEMs 71501-93 and

71313-96

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.47

EDITION 50

Drive

6

Universal 1" Handlebar

Combination Switch

High-lo beam switch with kill or horn

button.

25991 Chrome

Handlebar Light Switch

Mounts to any 1" handlebar. Duplicates

original-style, inside handlebar-wired

switch perfectly.

25534 Replaces OEM 71840-29T

Grill

Scallop

PM FL Ignition Switch Cover

Assembly

For 14-23 Touring, 14-23 FLHTCUTG, 18

FLHTCUTG ANV

607473 Drive, contrast cut

607474 Drive, chrome

607475 Grill, contrast cut

607476 Grill, chrome

607478 Scallop, chrome

Accel Single/Dual Fire Ignition

This ignition unit works with both single

or dual fire coils, eliminating the need to

buy a new ignition when you change coils.

Hours of dyno testing went into creating

this ignition so that it is simple to use and

delivers the premium performance you

expect from Accel. It has 14 preset ignition

curves to cover a stock engine through

exhaust and intake changes to a full

blown big inch, high compression motor.

Other features include an easily selectable

rev limiter and LED. timing light for quick

static timing. The harness has a V.O.E.S.

input, tachometer output and is externally

grounded for better reliability, and the

housing is machined out of aluminum for

better heat dissipation.

668013 Fits Big Twins from 71-99 (except

Twin Cam 88 models) and

Sportster models from 83-03

Handlebar Button Switch

Mounts to any 1" handlebar. Two-wire

style, and designed to run wires through

the handlebar for horn or starter.

25533 Replaces OEM 71800-26TA

Standard Motor Products

Ignition Sensors

Anyone who has ever told you that the

stock electronic ignition either works or

it doesn’t, is WRONG! Thousands of dyno

runs have proven to us that your stock

sensor can be operating at less than 100%

efficiency without you ever knowing it.

609994 For Touring models from 80-93,

Softail models from 84-85, FXR

and Sportster models from 80-94

(repl. OEM 32400-80A)

609995 For Dyna Glide models from

91-95 (repl. OEM 32404-90)

609996 For Touring models from 94-95,


and XL 1200S models from 98-03

(repl. OEM 32400-94)

Ignition Parts

Direct replacement for stock parts

59725 Ignition rotor for many models

from 83-02 (except models with

fuel injection) replaces OEM

32402-83

59726 Ignition rotor screw and washer

replaces OEM 2611B. Pack of 10.

VT-I Electronic Ignition System

by Daytona Twin Tec

Dual fire electronic ignition. Designed for

all Harley V-Twins except early magneto

style and 99 and later Twin Cam models.

Includes trigger rotor for use with

mechanical points. Built in adjustable RPM

limiter (5200-7000 RPM). Status LED for

easy static timing. Electronic dwell control

for maximum ignition energy at high RPM

and reduced current draw at low RPM.

Easy installation, simple two wire hookup.

672536 VT-I Ignition

031003

Daytona Twin Tec Fully

Programmable Ignition

Systems

These ignitions are an upgrade from

the non-adjustable stock OEM unit, and

feature advanced electronics set into a

machined billet aluminum housing. Rotary

switches are used to set the operating

modes (such as single or dual fire), adjust

the timing advance, and select the RPM

limit. Two diagnostic LEDs indicate the

status and the state of the vacuum switch

(VOES). The status LED is also used to

indicate top dead center (TDC) for easy

timing set-up. A special feature allows

use of the tachometer wire for a link to a

laptop PC. Windows compatible software

is freely available for download at the

company website. For kickstart enthusiasts

we have also included a kickstart mode.

031003 Fits most models from 70-99

(except Sportster models from

98-10 and Twin Cam 88 engines)

using stock electronic ignition

trigger rotor (not included)

672492 Internal Ignition 1500S for all

98-02 Sportster (except 1200S)

Not legal for sale or use on pollution

controlled vehicles.

Note: Sportster models from 71-82 and Big Twins from 70-83

require that mechanical advance units and point ignitions, or

early electronic ignitions and rotors be replaced by an OEM

32402-83 ignition timing rotor (CC #59725).

6.48

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

Compu-Fire Ignition System

for High Compression Motors

Eliminate pinging and misfire in high

compression and large displacement

engines. Advance curves range from fairly

steep for near stock to more gradual for

high-horsepower engines. All ignition

circuits are contained in the nose cone and

there is an ‘Accu-Ray’ static timing LED.

Single or dual fire operation is switchselected,

and dual sensor circuits eliminate

hard starts and give accurate spark timing

even at high RPM. Eight advance curves,

adjustable rev-limiter (6,000 to 7,500 rpm)

and two VOES modes.

17178 Fits all carbureted Big Twins

from 70-99 (except Twin Cam

models) and Sportster models

71-03

Compu-Fire ‘Elite 1’ Digital

Electronic Ignitions

All circuits are contained on the timing

plate. There’s no module or anything

else to mount! The HDE-1 and HDE-2

have fixed advance curves and 6500 RPM

rev-limiters to protect the engine. Model

HDE-3 has eight advance curves and an

eight-stage rev-limiter adjustable from

6000 to 7500 RPM or off. All models

have the Accu-Ray timing LED for precise

timing and system check. They work with

the factory VOES switch (HDE-3 offers

dual-range operation). Fit all carbureted

Big Twins from 70-99 (except Twin Cam

models) and Sportster models from 71-03.

17174 HDE-1 dual fire. Will not work on

kicker models.

17175 HDE-2 single fire

17176 HDE-3 single or dual fire

Compu-Fire Electronic

Ignitions

These digital ignitions use advanced

Hall-Cell triggering and surface mount

technology with a convenient builtin

‘Accu-Ray’ static timing LED. They

completely eliminate the rev-limiter and

have built-in adapters to correct the

tachometer output. Fit non-EFI Evolution

Big Twin models from 70-00 and Sportster

models from 71-03.

17170 Dual-Fire ignition system for single

plug cylinder heads

17171 Single-Fire ignition system for

single plug cylinder heads

Note: 80-10 models fitted with Original Equipment electronic

ignition systems will require the additional purchase of a

mechanical advance unit.

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.49

EDITION 50

6

Dyna ‘S’ Ignition Systems

Systems use magnetic rotors with Original Equipment spark advance mechanisms to

retain the factory advance curves and replace points and condensers with a highperformance

dual or single-fire system. Dyna ‘S’ ignitions change timing less than 3°

from 0-8,000 RPM and feature improved performance, easy installation and a 3-year

factory warranty. Dyna recommends using 5.0 ohm coils on Dynas’ dual and single fire

ignitions. Completely self-contained, and install behind points cover. Big Twins -99, XL

-03.

Note: For proper results, matching high-performance coils must be installed in conjunction with the CC #’s 12302 and 12369

single fire kits.

Complete Ignition Kits with Dyna Coils

Complete solution with Dyna S ignitions, Dyna high-performance coils, wiring and

detailed instructions.

12097 Dyna ‘S’ single fire kit

12098 Dyna ‘S’ dual fire kit

Kits without Advance Unit Assembly

Fit Sportster models from 71-79 and Big Twins from 70-79 using OEM advance unit.

12319 High-performance dual fire system (MFG #DS6-1)

12302 Single-fire ignition system (MFG #DS6-2)

Daytona Twin Tec Nose Cone Ignition Kit

Replaces the Original Equipment ignition system, and mounts in the gear case cover

using the standard H-D timing rotor (not included). Ignition offers adjustable advance,

adjustable RPM limit settings in 100 RPM increments, and switch selectable single

or dual fire modes. Single fire mode improves starting, reduces the occurrence of

backfiring at low RPM, and improves power at high RPM. Red LED flashes when the

engine reaches top dead center (TDC) permitting easy static timing. The status LED

also provides diagnostic information. A green VOES LED illuminates when the VOES

(vacuum switch) input is active. A special feature allows use of the tachometer wire for

an RS-232 link to a laptop computer when the engine is not running. Individual units

can be programmed with a custom advance curve and other engine parameters such as

rear cylinder timing offset. The use of the tachometer wire for the PC link eliminates

the need to remove the outer cover plate. Kit includes Single Fire ignition coil, 8.5 mm

universal plug wire set, and a nose cone ignition.

672528 Fits all Big Twin models from 70-99 and Sportster models from 71-97 insert

‘Stand-Alone’ Ignition System for Twin Cam Models by

Thunder Heart Performance

This innovative ignition is designed for use in custom bike applications were a twin cam

motor and crank sensor is going to be used. It consolidates all ignition components into

a small easy-to-mount package. Wiring the ignition system is a snap, because it includes

components needed to hook up the ignition to custom bike application. No factory

ignition harness required. Includes 'Smart Link' software that allows the user to fully

program the front and rear spark timing and rev limit with a lap top computer.

• Simplifies the installation of a Twin Cam motor into a custom bike

• Complete ignition system: Ignition module, Ignition coil

• Consolidates all ignition functions in a compact, easy-to-mount package

• Integrated high-output single fire operation

• Real-time diagnostic features aid in trouble-shooting and tuning

• Utilizes the factory crank trigger for improved starting and performance

• Billet aluminum housing is weather and vibration-proof

• Includes comprehensive instructions for installation

• Custom mounting using 1/4"-20 bolts at 2" center-to-center hole spacing

• Fits custom bikes using Twin Cam engines and Evolution engines with crank sensors

640330 Complete kit

6.50

APPAREL

630101

SEATS &

TOURING

640281

FOOT

CONTROLS

630102

HAND

CONTROLS

031005

LIGHTING

630103

Dynatek 2000iP Programmable Ignition Systems

Dynatek has upgraded their popular 2000i ignitions to be fully programmable when used with the

optional programming kit.

• Completely self-contained under the cam cover for a clean look

• Heavy-duty billet aluminum construction for long life

• Single fire operation down to zero rpm for easier cranking and kicking

• Operates all combinations of single fire or dual fire with single plug or dual plug heads (when

used with appropriate coils)

• Eight advance curves to cover a broad range of engine configurations and riding styles

• Engine over-rev protection adjustable from 6.000 to 7.500 rpm

• Adjustable timing retard for nitrous and turbo applications

• VOES indicator tells you at a glance, the status of the VOES switch

• Built-in tach driver can be used to activate shift lights and auto-shifters

• Easy static timing with built-in timing indicator

• Intelligent over-current/short-circuit protection, active dwell control and over-voltage protected

• Fits Sportster models from 70-03 and all Big Twin models from 70-99 (except Twin Cam 88

models)

630108 Dyna 2000i module ONLY

630101 Complete kit for single plug/single fire applications (includes one DC6-5 'Twin Fire II' 3 Ohm

coil)

630102 Complete kit for single plug/single fire applications (includes two DC3-1 single tower 3 Ohm

coils)

630103 Complete kit for dual plug/single fire applications (includes two Dyna DC1-1 dual tower 3

Ohm coils)

Optional Programming Kit for Dynatek 2000iP Ignitions

Adds full PC programmability and data recording to Dynatek 2000iP ignitions.

• 8 point fully definable wide open throttle curve, 8 point fully definable part throttle curve

• Rev limit programmable in 50 RPM steps

• Programmable dead cranking revs 0-5, Programmable rear cylinder offset, total of +/- 10°

• Programmable rev limiter

• Maximum RPM and Seconds near rev limit

• Total engine hours/time at wide open throttle

• Number of engine starts (two minutes running counts as one)

• Longest time operating at wide open throttle

630100 Programming kit

Daytona Twin Tec

Programmable

Ignition Modules

Special features:

• More power with dyno

tuning – optimized built-in

advance curves and easy

programming of custom

curves

• Full support of the new

J1850 data bus used for

communications with

instrument cluster and turn

signal/security module (TSM/

TSSM)

• Compatible with

H-D scan tools, also

allows recalibration of

speedometer/odometer to

accommodate tire and gear

changes

• Built-in data logging for

last 30 minutes of engine

operation (engine builders

will find this highly useful

for tuning, diagnosing

problems, and reducing

unjustified warranty claims)

• Free demo software

available for download on

Daytona Twin Tec web site

and custom advance curves

(must use USB interface

cable)

• Fits carbureted Twin Cam 88

and Sportster models with

12-pin connector from 04-06

640281 Programmable module

ONLY (T/C 04-06,

XL with 12 pin)

031005 Fits carbureted Twin

Cam 88 models from

99-03

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.51

EDITION 50

6

630107

890545

Mallory Unilite Distributor

For faster, easier starting, Mallory’s 12-

volt electronic ignition system delivers

performance and reliability at an

affordable price. The billet aluminum

distributor utilizes the Unilite ignition

module, and a heavy-duty fully adjustable

mechanical advance unit. Includes

detailed instructions and wiring harness.

26916 Fits Big Twins from 36-69

Note: When using stock heads, no head removal is required

Ignition Wiring Cover

This kit has everything you need to braid

the wire coming our of the cam cover.

893426 For all EVO ignition harnesses

Motor Factory Circuit Breaker

Cam

12322 Circuit breaker cam (repl. OEM

32542-70TA)

890546 Mallory All Electronic Ignition

Distributor

All the features and benefits of an

Dynatek 2000 for Carbureted

electronic Hall Effect ignition packaged in

Twin Cam & Sportster models a distributor for early model Big Twins and

• Single Fire ignition

for the old school customs. With electronic

• Fully programmed

advance, rev limiting, and choice of Single

• Stock OEM mounting

or Dual Fire for 12-volt systems. Detailed

• Stock OEM connectors

instructions included. Installs without

• Reverse battery and Spike protection removing the cylinder heads.

built-in

630107 Twin Cam carbureted 99-03

668030 Fits Big Twins from 36-69

890545 Twin Cam carbureted 04-06

890546 Sportster 04-06

Chrome Antique-Style Coil

Covers

Designed after the popular covers used in

the mid-1940s. The two openings in the

front permit easy access to the plug wires,

and the inside of the covers features a

heavy-duty mounting bracket.

15206 Fits all Softail models 84-99

Note: These coil covers may not be used in conjunction with

CC #’s 25410 or 25411 due to interference problems.

Chrome Ignition Module

Cover

Chromed steel cover replaces the

standard black metal cover on Sportster

models from 82-03.


Ignition Module Bolt Kit

Secure the ignition module cover on

Sportster models. Three-piece chromeplated

countersunk sockethead screw kit.

32049 Fits models from 98-03

Roller Bearing Advance Kit

Smooth advance for ignition timing has

reached a new level of performance and

reliability with our roller bearing advance

kit. Roller bearings at the pivots of the

advance weights gives the proper amount

of ignition advance at the right time every

time. Included are all the parts to make

the ignition up-to-date with better-thannew

performance. Includes the roller

bearing weights installed on a quality

advance unit shaft and plate, circuit

breaker base plate, points cam, wiring

harness, springs and timing screw. Fits 70-

E78 Big Twins or 71-E78 Sportster models

as well as many models from late 78-03

when converting to point-style ignitions.

12402 Complete kit

Coil Cover for Twin Cam

Models

Billet Aluminum coil cover for Twin Cam

models. Black powder coated. Sold each

681424 Black coil cover for crane single

fire coil

6.52

APPAREL

SEATS &

TOURING

Chrome Coil Cover for

Sportster Models

Show-chrome two-piece coil

cover. Beautifully constructed

from stamped steel for

a perfect fit on Original

Equipment or aftermarket

coils from 71-81.


83T

Static Timer

This static-timing device permits you to lock your advance position while you static-time it. Helps

reduce kickback while promoting easier starts and smoother running.

20134 Fits all models with point-type ignitions from 70-78

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

26378 688075

Chrome or Black Coil

Covers

A variety of styles to add the

perfect custom touch to your

machine. Fit 4-speed Big Twin

and Softail models from 65-99.

26378 Louvered chrome

coil cover (repl. OEM

31610-83T)

688076 Louvered black coil

cover (repl. OEM

31610-83T)

15210 Plain chrome coil

cover (repl. OEM

31606-65TA) not

shown

688075 Plain black coil cover

(repl. OEM 31606-

65TA)

Circuit Breaker

• Made only from the finest materials


Unit: Set , Qty.: 1

FITMENT FITMENT NOTE OEM # PART#

49-52 Flathead, 49-65 Panhead, 66-69 FL

Shovel, 54-69 Sportster

Except K models, equipped with

magneto ignition

30605-48 928092

58-69 Sportster For models with magneto ignition 29533-55A 928094

71-78 Sportster, 70-78 FL Shovel, 71-78 FX

Shovel

895422 895423

32661-70 928093

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

Coil Cover for FXR

Models

A beautiful chrome-plated coil

cover for all FXR models from

82-94.


82T

895424

Points & Condenser Kit

895422 Sportster And K Models Except Magneto 54-70 and Big Twins 48-69

895423 900 CC XLHC With Magneto 58-69

895424 Sportster 71- Early 78 and Big Twins 70-Early 78

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.53

EDITION 50

Blue Streak High-Performance Points and Condenser

These Blue Streak lubri-points feature heavy-duty construction, lubriwick, oversize ventilated

contacts and copper shunt. Available in a kit or individually.

Point and Condenser Set

17190 Fits Sportster models from 71-E78 and all Big Twins from 70-E78 (repl. OEMs 32661-70,

32726-30, 30801-47)

Points Only

17191 Fits Sportster models from 71-E78 and Big Twins from 70-E78 (repl. OEM 32661-70)

Condenser Only

17192 Fits all Sportster and K models (except magneto) from 54-E78 and Big Twins from 30-E78

(repl. OEMs 32726-30A, 30801-47)

6

25492

Accel Tune-Up Kits/Components

The tune-up kits include matched point sets with a compact mylar-insulated condenser and a

packet of point cam lube. Sold each.

Fits Sportster Models from 71-E78 and Big Twins from 70-E78

High-performance point set has a heavy-duty 32-oz. spring to resist ‘point bounce’ at high RPMs.

25490 Tune-up kit

Fits Sportster and K Models (except Magneto) from 54-70 and Big Twins from 48-69

25491 Tune-up kit

Fits 58-69 Sportster Models with Magneto

25492 Tune-up kit

Condenser

• Made only from the finest materials




928087 58-69 Sportster 29534-55A

928088 30-52 Flathead, 36-47 Knucklehead, 48-65

Panhead, 66-78 FL Shovel, 71-78 FX Shovel,

54-78 Sportster

Except K models with

magneto ignition

30801-47, 32726-30

6.54

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.55

EDITION 50

990109 917670 917670 607805

6

607803 607800 917669 917669

890392 607804 890706 890393

890394 607806 607809 607817

607801 607802 607807 607810

607818 607808 607815 890391

6.56

APPAREL

MotorFactory Ignition Coils

• High quality replacement coils

• OEM replacement coils for Indian and H-D models


SEATS &

TOURING

PART#

FITMENT

FITMENT NOTE

607803 01-06 Softail, 12, 14-17 FLS, 12 FXS, 13 FLS EFI Models Black 31743-01 Single Fire 0,5

103, 13 FXS 103, 14-16 FXSB, 16-17 FLSS, 02-06

Touring, 01-06 Dyna

890393 02-17 V-Rod EFI Models Black 32477-01A Single Fire 3

607805 07-17 Dyna, 07-16 Touring, 07-17 Softail, (except EFI Models Black 31696-07 Single Fire 0,5

12, 14-17 FLS, 12 FXS, 13 FLS 103, 13 FXS 103, 13-

14 FXSBSE, 14-16 FXSB, 16-17 FLSS, 16-17 FXSE),

09-16 Trike

607804 07-20 Sportster EFI Models Black 31656-07 Single Fire 0,5

890394 08 FXCW, 08-10 FXCWC EFI Models Black 31684-08 Single Fire 0,4

890395 11 FXCWC, 11-12 FXS, 14-16 FXSB, 13-14 FXSBSE, EFI Models Black 31684-11 Dual Fire 3

13 FXS 103

990109 15-24 Indian Bagger, (except 22 Challenger Dark EFI Models Black Dual Fire 0,9

Horse , 22 Challenger Limited , 23-24 Challenger,

23-24 Challenger Dark Horse, 23-24 Challenger

Limited, 23-24 Challenger Elite), 12-24 Indian

Cruiser, 15-24 Indian Touring, (except 22-24

Pursuit Dark Horse, 22-24 Pursuit Limited, 23

Pursuit Elite)

917669 17-24 Touring, (except 23-24 FLHXSE, 23-24 EFI Models Black 31600017 Dual Fire 5

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE),

17-24 Trike

917670 18-24 Softail EFI Models Black 31600067 Dual Fire 3

607806 65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, Carburator Models, with Black Compact Case 31609-65A Dual Fire 5

65-79 Sportster

Points Condensor Ignition

607809 65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, Carburator Models, with Black Molded Case 31609-65A Dual Fire 5

65-79 Sportster


607813 65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, Carburator Models, with Black 31609-65A Dual Fire 5

65-79 Sportster


607817 65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, Carburator Models, with Chrome 31609-65A Dual Fire 5

65-79 Sportster


17130 65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, Carburator Models only Black 31609-65A Dual Fire 5

65-79 Sportster

607801 71-03 Sportster, 70-84 FL Shovel, 71-84 FX Carburator Models Black Single Fire 3

Shovel, 85-94 FX Model, 91-98 Dyna, 84-99

Softail, 85-98 Touring

607802 71-03 Sportster, 70-84 FL Shovel, 71-84 FX Carburator Models Chrome Single Fire 3

Shovel, 85-94 FX Model, 91-98 Dyna, 84-99


607807 80-84 FL Shovel, 80-84 FX Shovel, 80-82 Carburator Models, with Black Compact Case 31609-80 Dual Fire 4

Sportster, 84 Softail

Elektronic Ignition

607810 80-84 FL Shovel, 80-84 FX Shovel, 80-82 Carburator Models, with Black Molded Case 31609-80 Dual Fire 4


Elektronic Ignition

607814 80-84 FL Shovel, 80-84 FX Shovel, 80-82 Carburator Models, with Black 31609-80 Dual Fire 4


Elektronic Ignition

607818 80-84 FL Shovel, 80-84 FX Shovel, 80-82 Carburator Models, with Chrome 31609-80 Dual Fire 4


Elektronic Ignition

17131 80-84 FL Shovel, 80-84 FX Shovel, 84 Softail, Carbureted Models, with Black 31609-80 Dual Fire 4

80-82 Sportster

Elektronic Ignition.

607808 85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85-98 Carburator Models Black Compact Case 31614-83 Dual Fire 3

Touring

607811 85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85-98 Carburator Models Black Molded Case 31614-83 Dual Fire 3

Touring

607815 85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85-98 Carburator Models Black 31614-83 Dual Fire 3

Touring

607819 85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85-98 Carburator Models Chrome 31614-83 Dual Fire 3

Touring

890391 95-97 FLHTCU, 95-98 FLHTC, 95-98 FLHR, 96-98 Magneti-Marelli Fuel Black 31639-95 Dual Fire 2

FLHT, 96 FLHTUI, 96-97 FLHRI, 97-98 FLHTCUI,

98 FLHRCI

Injected

890706 98-03 XL1200S Carburator Models Gray 31646-98 Single Fire 3

890392 99-01 Touring Carburator Models Black 31639-99 Dual Fire 3

607800 99-06 Dyna, 00-06 Softail, 04-06 Sportster, 02-06 Carburator Models Black 31655-99 Dual Fire 6

Touring

COLOR

DESCRIPTION

OEM #

OPERATION

TYPE

RESISTANCE

OHM

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.57

EDITION 50

09100

672493

6

Thunderbolt Coil

The internal windings

are 100% immersed in an

oil-filled jacket. The oil

insulation cannot become

brittle with age or crack from

heat like conventional jelly

materials. Includes wirecore

‘yellow jacket’ spark

plug leads with black 90°

plug boots, a chromed coil

bracket, hardware and a

“THUNDERBOLT” sticker.

25588 12-volt coil with 5.0

Ohms of resistance

for use with pointtype

ignition systems

Motor Factory 12-Volt

Coils

Quality replacement coils

for 12-volt applications.

Engineered to the exact

specifications and design as

the Original Equipment parts

they replace. They’re available

for 65-79 models or 80-84

models equipped with V-Fire II

or V-Fire III electronic ignitions.

Note: These two coils are not interchangeable.

Installation of the 80-84 coil on earlier

models, or the installation of the 65-79 coil

on later models, may shorten point life or

damage other electronic components on

the vehicle.

17130 Fits 12-volt models

from 65-79 with

points or Prestolite

electronic ignitions

(repl. OEM 31609-

65A)

17131 Fits all Shovelhead

models from 80-84

and Sportster models

from 80-82 with

V-Fire II electronic

ignition, as well as

Sportster models

from 83-84 with

V-Fire III ignitions

(repl. OEM 31609-80)

09413

Dynatek ‘Twin Fire’

High-Output Coils

The perfect complement to

digital electronic ignition

systems. Each unit packs two

individual 40,000 volt coils into

one high-performance single

fire unit, for FXR, Dyna Glide

and Softail models in stock

locations using stock brackets

and covers.

• No exposed lamination

to rust and degrade

performance

• Terminals machined from

solid brass

• High impact thermoplastic

housings are ultrasonically

welded and sealed against

moisture

• 3-Ohm resistance with peak

gap current in excess of

500ma

• Accepts 7 to 8mm sparkplug

wires

• Made in the USA.

For Single Spark Plug Heads

Easily fits under the gas tanks

of Sportster and Touring

models.

09100 Two output towers

(MFG #DC6-5)

For Dual Spark Plug Heads

Slightly larger than a stock

coil and features high and low

mount output towers.

09413 Four output towers

(MFG #DC6-4)

Note: These single fire coils were designed to

be used with digital electronic ignitions with

dwell control such as the Dyna 2000 Digital.

EFI Coil for Twin Cam

by Daytona Twin Tec

High output ignition coil for

fuel injected Twin Cam models

from 00-06. Mounts in stock

location. Sold each.

672494

672477

High Output Coils by

Daytona Twin Tec

672493 3 Ohm primary,

compatible with all

Twin Tec and most

aftermarket single

fire ignitions. Fits

Shovelhead models

70-84, Sportster

models 71-84 and

Evolution Big Twin

models 84-99 (except

those equipped with

fuel injection).

672494 0.5 Ohm primary,

fits 99-06 carbureted

Twin Cam and

Sportster 04-06.

Replaces OEM 31655-

99 (WILL NOT replace

OEM 31639-99)

672477 3 Ohm mini coil ,

compatible with

most single fire ignitions,

includes bag

with terminals (ARB

O.E. number D-641-2)

Sold each.

Chrome-Plated

Original-Style Coil

Original-style square coil

complete with copper core

wires, connectors and bracket.

Available to fit many models

from 48-E82. They’re not

compatible with electronic

ignitions on 80-Up models.

Plug wires are 13” and 23”

long. Sold each.

17132 12-volt

12381

Dynatek Ignition Coils

Dynatek coils for Harley-

Davidson applications are

high-quality American-made

performance coils designed

to provide spark voltages

in excess of 30,000 volts

and spark energy second to

none. Coils may be installed

in conjunction with Original

Equipment V-Fire III and

compatible after-market

electronic and point-type

ignition systems. Available

in four 12-volt versions with

single and dual towers, these

coils are the perfect answer

for two or four plug heads.

Additional brackets will be

required for installation. Sold

in pairs.

09422 12-volt, 3.0 Ohm coils

with single towers

(MFG #DC-3)


with dual towers

(MFG #DC-1)


with dual towers

(MFG #DC8-1)


with single towers

(MFG #DC10-1)

672537 EFI Twin Cam coil

6.58

APPAREL

SEATS &

TOURING

Dynatek Dyna-Mite Coils

Feature the same dependability and

performance as the original ‘Dyna’ coils

and produce spark voltages in excess of

30,000 volts with spark energies secondto-none.

All ‘Dyna’ coils are covered by a

Limited Manufacturers Warranty against

defects in materials and workmanship.

12381 3.0 Ohm for electronic ignitions

(MFG #DC6-1)

12382 5.0 Ohm for use with point ignitions

(MFG #DC7-1)

Ignition Coil for Twin Cam by

Blue Streak

Designed for a stock replacement ignition

coil on 02-06 Touring, 01-05 Dynas, 00-06

Softails and 04-06 Sportsters. Carbureted

models only. Sold each.

668345 TC repl. ignition coil

Single Fire Ignition Coil by

Blue Streak

High Quality coil for use with most single

fire applications (except Twin Cam). 3

Ohm primary resistance. Sold each.

668344 Single fire coil

668367

668368

Accel Super Coils for Twin

Cams

These ACCEL Motorcycle Super Coils

are designed to produce the maximum

amount of spark energy, fast coil rise

times and a voltage output that is

45% higher than the OEM coil. The

ACCEL Super Coil is our highest output

motorcycle coil. The Electronic Super Coil

is easily installed in the OEM location

using stock (later model year) coil covers

on electronic ignitions.

668367 Accel Carbureted Twin Cam -06

668368 Fits fuel injected Softails 01-06,

Dynas 04-05 and 2011 and

Touring models 02-07

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

Ignition Coil

• Direct replacement ignition coil


PART# FITMENT DESCRIP- OEM #

TION

930348 65-78 5 Ohms 31609-65A

Sportster,

65

Panhead,

66-79 FL

Shovel

930349 07-20

Sportster,

15-20

Street

31656-07

RevTech Coils

High-output, 80,000 volt coils that work

with 3 Ohm electronic ignitions on most

Big Twin models from 80-99 and Sportster

models from 80-03. Available in single or

dual fire versions that fit under Original

Equipment coil covers.

28714 Dual fire

28673 Single fire

ACCEL Stealth Supercoil

The all new ACCEL Stealth SuperCoil is

the hottest looking and best performing

ignition coil on the market. The ACCEL

Stealth SuperCoil eliminates the need for

ignition wires forever by mounting the

coil directly to the spark plug. A beautiful

cast aluminum cover holds the coil in

place and acts as a functional heat sink to

pull heat away from the cylinder head. All

wiring is hidden in the fins of the head for

a clean and custom look.

• Patent pending design mounts the coil

directly to the spark plug

• Custom, clean, wireless appearance

• Proven automotive technology for your

air cooled Twin Cam

• Maximum spark energy to the plugs

• Limited Lifetime Warranty

656070 Black for EFI Softail models

01-17, EFI FL models 09-16 and

EFI Dyna models 06-17

656071 Natural for EFI Softail models

01-17, EFI FL models 09-16 and

EFI Dyna models 06-17

Accel Power Pulse Coil

Accel performance coil with a unique

design that provides longer spark

duration with a greater KV rating and

faster rise time than the stock coil.

Molded in bright yellow epoxy, it is

guaranteed to improve starting, midrange

response and top-end performance.

25507 Fits 12-volt models with

point-triggered or Prestolite electronic

ignitions from 65-79 (4.2

Ohm primary resistance)

Accel Single Fire 3 Ohm ‘Super

Coil’

This ‘Super Coil’ is just as powerful as the

original. Makes for a perfect replacement

or upgrade and will bolt right on with no

modifications to your bracket. Fits all Big

Twin and Sportster models (except Twin

Cam models or fuel injected models) with

aftermarket single fire ignitions from 65-

06. Comes in black and ‘Accel Yellow’.

668002 Yellow

668033 Black

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.59

EDITION 50

25236

651307

6

Chrome Coil Bracket

Heavy-duty chrome plated coil brackets

for Big Twins 48-82. Can also be used for

custom builds with frames having the coil

mounts on the left hand side of the down

post.

25236 Coil bracket repl. OEM 31728-

78TA

651307 Coil bracket repl. OEM 31725-

48A

618388

Accel Super Coils

These coils produce up to 67% more

voltage than stock coils. They also have

a faster rise time and longer spark

duration which provide quicker starting,

an improved idle and crisper throttle

response. Other features include a

finned top which acts as a voltage dam

to prevent arcing, carbon-tracking

and “flashover”, as well as improved

configurations to permit simple bolt-on

installations. Come in black or ‘Accel

Yellow’ or chrome. Fits all 12-volt models

with point-triggered or Prestolite

ignitions from 65-79 (4.7 Ohm primary

resistance).

25410 Yellow

668031 Black

Fits all models with electronic ignitions

(except Twin Cam engines and fuel

injected Evolution engines) from 80-03

(2.3 Ohm primary resistance)

25411 Yellow

668032 Black

Note: These coils may not be used in conjunction with CC #’s

15205 or 15206 coil covers due to interference problems.

Coil Relocation Kit

This bracket relocates the coil and ignition

switch between the cylinder heads.

Fitment Note: Horn Needs To Be

Relocated. , Color: Black Powder

Coated , Unit: Kit , Qty.: 1

PART#

FITMENT

917042 07-13 Sportster


618387

Ignition Switch Relocation

Brakets for Sportster by ODC

618387 For Sportster 04-13 (on primary)

618388 For Sportster 92-03 (on battery

case)

MW Black Billet Twin

CamMotor Mount

Black top motor mount made of billet

aluminum and black powder coated

finish. Fits Twin Cam models

681423 Sold each

Cylinder Brackets for Dyna by

ODC

With this bracket, relocate your coil and

horn between the cylinders.

656150 For Dyna 99-17

6.60

APPAREL

618383

SEATS &

TOURING

618386

619662

888406

Accel ‘300+’ Plug Wire Sets

8.8 mm core has 300% greater current

capacity than most other ‘highperformance’

ignition wires, yet still

suppresses radio frequency interference

that electronic ignition systems demand.

23828 Fits 4-plug Sportster XL1200S

from 98-06

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

619661

ELECTRICAL

690831

EXHAUST

Cylinder Brackets for

Sportster by ODC

With this brackets, be free to relocate

your choke, coil or ignition switch on your

Sportster.

Coil & Key Switch Relocation

Kit

Black powder coated.

888406 XL 04-06

INTAKE

618386 With choke relocation for

Sportster 04-06

690831 XL 07-13 888406

ENGINE

619662 With coil relocation for Sportster

07-20

619661 With coil and ignition switch

relocation for 07-20 Sportster,

except 08-10 XR1200, 10-13

XR1200X(must be used with a

tank lift)

Universal Black Spark Plug

Wires by Compu-Fire

For use with all custom applications

utilizing single or dual plug heads and any

coil combination.

23232 8mm spiral wound plug wire set

for four-plug applications

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Coil Relocation Kit

Black powder coated.

888407 XL 14-20

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

Coil Relocation Bracket by

Cult Werk

Steel bracket black powder coated to

relocate the coil under the tank section.

No change of wiring needed!

Fits 06-20 Sportster

893742 Coil bracket

Ignition Coil Relocation Kit

• Converts the position of the coil up and

closer to the engine

• OEM bracket needs shortening

PART# FITMENT COLOR

912725 18-24 Softail Powder Coated

Precision Coil Cover

• Features a sculpted design with raised

fins that provide depth

• Covers the coil and plugs

• Easy bolt-on installation

Fitment: 18-23 Softail ,


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

PART#

COLOR

776467 Gloss Black

776466 Chrome

TOOLS &

EQUIPMENT


6.61

EDITION 50

668339 668335 668336 668338

668340 895448

6

895449

928096

928097

Triple Silicone Spark Plug Wire Set

• 8 mm triple silicone wire sets

• Ready to install

• Works with stock or performance coils

• Wire sets meet or exceed factory requirements

Color: Black , Unit: Set , Qty.: 1

• Quality construction of silicone throughout the jacket,

insulation and core

• High temperature resistance and durability

• OEM style terminals

PART# FITMENT DESCRIPTION OEM #

668330 For custom application multi-fit wireset

668331 80-84 FL Shovel, 91-98 Dyna, 84-99 Softail

668332 85-96 Touring

668333 82-84, 89-94 FXR, 82-84, 89-92 FXRS, 83-84, 89-92 FXRT, 84 FXRSDG, 86,

70187-82

89 FXRSL, 87 FXRC, 90-99 FXRS_CON, 90-93 FXRSSP

668334 86-03 Sportster, (except 98-03 XL1200S) 31986-86, 31996-86

668335 97-98 Touring 31992-91

668336 99-08 Touring 31992-99

668337 99-17 Dyna 31960-99,31981-99

668338 98-03 XL1200S 32043-98,32044-98,32045-

98,32046-98

668339 00-17 Softail, (except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103,

31983-00, 31981-99

14-16 FXSB)

668340 For custom application 4 plug multi-fit wireset

668341 04-06 Sportster 31996-04

668342 07-20 Sportster, (except 08-10 XR1200, 10-13 XR1200X) 32003-07,32006-07

895447 09-16 Touring, 09-16 Trike 32013-09, 32014-09

895448 09, 15 Victory Bagger, 09-15 Victory Cruiser, 09-15 Victory Touring

895449 12-13 Indian Cruiser N61100003

895450 15-17 Street 31600008, 31600009

928096 17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX,


Set of 4 Cables 31600018, 31600023, 31600078,

31600079

928097 18-24 Softail, (except 19-20 FXDRS 114) Set of 4 Cables 32001-08, 31600081

6.62

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

409 Pro Race 10,4mm Ignition Wires

• Taylor‘s .409-inch, 10.4mm diameter high performance ignition wires are available for street or track applications.

• „409” ignition wires provide continuous heat protection up to 600-degrees Fahrenheit and 102,000 volts dielectric strength and is

recommended for extreme under hood temperatures and open wheel racing.

• Features a Spiral-Wound core with 350 ohms per foot resistance for EMI and RFI suppression delivering maximum fire power

without radio interference and recommended for use with multiple-spark discharge and electronic ignition systems.

• Available in three color choices, Black, Red, and Blue, with color coordinated low profile 100% silicone PRO BOOTS® featuring

vibration proof double spring locking spark plug terminals.

Unit: Set , Qty.: 1

FITMENT BLACK BLUE RED

00-17 Softail, (except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB), 99-17 Dyna 602165 602167 602166

07-20 Sportster, (except 08-10 XR1200, 10-13 XR1200X) 602171 602172

09-16 Touring, 09-16 Trike 602180 602182 602181

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 Trike 917698 917699

18-24 Softail, (except 19-20 FXDRS 114) 917701 917702

66-79 FL Shovel, 71-84 FX Shovel, 85 FX Model, 91-98 Dyna, 84-99 Softail, 65-85 Sportster except FXR 602162 602164 602163

Models

80-84 FL Shovel, 85-98 Touring, 86-03 Sportster, (except 98-03 XL1200S) 602168 602169

82-84 FX Shovel, 85-94 FX Model Only FXR Models 602177 602179 602178

INTAKE

ENGINE

99-08 Touring, 04-06 Sportster 602176 602175

GASKETS

TRANNY &

CLUTCH

Pro-Spark 8mm High Performance Ignition Wires

• Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts

due to its affordable value and overall high performance

features

• Spiro-Pro‘s two-layer 100% silicone inner core & outer

jacket keeps the wires flexible for the life of your vehicle

maintaining its vibrant color with heat protection to 600º F

• Taylor Cable’s Spiro-Pro wire consists of a high conductive

spiral wound core with a Stainless Steel wire and covered with

a fluorocarbon conductive material

• Spiro-Pro features 350 ohms per foot resistance which

Unit: Set , Qty.: 1

provides more fire power to the spark plugs than OEM resistor

core wires and has up to 10 times less resistance than standard

resistor core wires

• Spiro-Pro eliminates radio frequency interference (RFI) and is

recommended when using a multi spark discharge, electronic

ignition systems and other electronic components

• Features Taylor Cable’s EXCLUSIVE low profile 100% silicone

PROBOOTS® with vibration proof Stainless Steel double

spring locking spark plug terminals

FITMENT BLACK BLUE RED

00-17 Softail, (except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB), 99-17 Dyna 602134 602137 602135

07-20 Sportster, (except 08-10 XR1200, 10-13 XR1200X) 602142 602145 602143

08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB 602158 602161 602159

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

09-16 Touring, 09-16 Trike 602154 602155

17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 917704 917707 917705

Trike

18-24 Softail, (except 19-20 FXDRS 114) 917708 917711 917709

66-79 FL Shovel, 71-84 FX Shovel, 85 FX Model, 91-98 Dyna, 84-99 Softail, 65-85 Sportster 602130 602133 602131

except FXR Models

80-84 FL Shovel, 85-98 Touring, 86-03 Sportster, (except 98-03 XL1200S) 602138 602141 602139

85-94 FX Model, 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 FXRSDG 602150 602153 602151

99-08 Touring, 04-06 Sportster 602146 602147

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.63

EDITION 50

668060 668061

Accel 8 mm Spark Plug Wire Sets

Accel 8 mm wires deliver up to 5x more energy to the spark plug. Fully compatible with Fuel Injected or Carbureted engines. Can

withstand temperatures over 500º. Silicone outer layer available in a variety of colors.

6

Fits 00-17 FXST, FLST

Models (except FXCW/C)

668068 Black

668069 Red

Fits 99-17 FXD/FXDWG

Models

668060 Black

668061 Red

Fits 99-08 FLHT/FLTR Models

668064 Black

668065 Red

Fits 09-16 FLHT/FLTR Models

668362 Black

668359 Red

Fits 07-20, except 08-13

XR1200/X

668355 Red

Accel Thundersport 5mm Ignition Wire Kits

Half the diameter of stock wire and extremely flexible. Easy to run through cylinder heads, rocker covers, and frame tubes for a totally hidden look. 150

Ohms per foot Ferro-Spiral wound alloy conductor delivers super performance. The high gloss 5mm silicone jacket is rated for over 550 degree F and 60KV.

They are available in four different colors, and packed with two 5 foot leads with 90 degree spark plug ends crimped on. Just run the wire, cut off excess,

and follow the easy instructions to terminate the straight coil boots. Fits all models except those with Delphi fuel injection.

668003 Black

668006 Blue

Accel Black 8.8 mm Custom Wire Sets

Black with black plug boots. Non-resistor stainless-reinforced high-conductivity silver-plated copper wire or resistor suppression

core. High dielectric-strength silicone plug boots prevent arcing to cylinder heads, and brass coil terminals have weatherproof boots

attached at the factory to insure perfect termination.

Stainless/Copper Core

26872 Fit all Sportster models with magneto from 58-69

Suppression Core

26868 Fit all 4-speed FL and FX models (except Softail models) from late 78-84

26869 Fit Sportster models from late 78-85, FX models from 85-86; Softail models from 84-90; Dyna Glide models from 91-98

26875 Fit Evolution Sportster models (except XL1200S models) from 86-03

26873 Fit all FXR models from 82-99

26874 Fit all 5-speed Touring models 80-84

26884 Fit all Softail models from 91-99

26885 Fit all Touring models from 91-98

6.64

APPAREL

668060 912636 912638

SEATS &

TOURING

FOOT

CONTROLS

8 mm Custom Spark Plug Wires

• 500 Ohm per foot

• Maximum RFI protection shields sensitive electronics

• Up to 5 times more peak energy than other „performance“ wires

• Custom fit sets are ready to install, no cutting or splicing required

• Include wire tires for a factory appearing installation

Unit: Set , Qty.: 1

913163

FITMENT BLACK RED

00-17 Softail, (except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB) 668068 668069

04-06 Sportster, 99-08 Touring 668064 668065

07-20 Sportster, (except 08-10 XR1200, 10-13 XR1200X) 668355

09-16 Touring 668362 668359

17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 Trike 912636 912638

18-24 Softail 913163

99-17 Dyna, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 03-10 XB 668060

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

930342 930343

930340 930341

TRANNY &

CLUTCH

DRIVELINE

930347

WHEELS, TIRES

& BRAKES

930344 930345 930346

FRAMES

Spark Plug Wire Set

• Direct replacement spark plug wire set

Unit: Set , Qty.: 1

PART# FITMENT OEM #

930340 00-17 Softail, (except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB), 99-17 Dyna 31907-08A

930341 07-20 Sportster, (except 08-10 XR1200, 10-13 XR1200X) 31932-99

930342 04-06 Sportster, 99-08 Touring 31992-99

930343 09-16 Touring, 09-16 Trike 32303-08A

930344 91-98 Dyna, 84-99 Softail, 85-98 Touring 32095-98B

930345 86-03 Sportster, (except 98-03 XL1200S), 85-98 Touring, 80-84 FLT, 81-84 FLTC 32092-98B

930346 85-94 FX Model, 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 FXRSDG 70187-82

930347 17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE) 31600108


FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.65

EDITION 50

668335

6

668339

668336

Blue Streak Plug Wires for

Points Ignitions

For older points style ignitions Blue Streak

offers a ‘Copper Core’ plug wire set with

improved electrical conductivity and

mechanical strength. These non resistive

sets should only be used with points

ignitions, proudly made in the USA.

668260 Fits XL and XLCH models with

magneto 65-69

668261 Fits all XL models 71-78

668262 Fits 65-78 FL, FLH and 71-78 FX

FXE models

Kuryakyn ‘Scorpion’ Head Bolt

Covers for Twin Cam Models

Held in position with set screws, insuring

rattle-free performance. With this design,

the spark plugs can be removed without

taking the covers off. Sold in pairs.

48271 Fits all Twin Cam models from

99-17 except 17 Touring models

668340

895448

Blue Streak Silicone Plug Wire

Sets

895448 Fits Victory 08-15

668338

895449 Fits Indian 09-13

895450 Fits HD Street models

Blue Streak Silicone Plug Wire

Sets

These replacement plug wire sets feature

triple silicone construction throughout

jacket, insulation and core. They meet or

exceed SAE J2031 and J2032 specifications.

Proudly made in the USA.

668330 Universal multi-fit set

668331 Fits all Softails 84-99, FXD 91-98

and FL 80-84

Flashlight Magnifier

• Flashlight and magnifying glass in one

• Perfect for reading spark plugs, jet sizes,

and many other uses

• Durable plastic head with chrome steel

body

20155 Flashlight

Chrome Spark Plug Covers by

Kuryakyn

Simply pushes over the spark plugs

to cover the plugs and head bolts

next to them. Chrome-plated die-cast

construction. Sold in pairs.

Note: Will not fit aftermarket head castings.

48018 Fits Evolution Big Twin 84-99 and


668332 Fits all FLT, FLHT, FLHR, FLTR

models 85-96 and FLHS 82-93

668333 Fits all FXR models 82-99

668334 Fits XL models (except 1200S)

86-03


models 97-98

Precision Plug Cover

PART# FITMENT COLOR


models 99-08

668337 Fits all FXD models 99-17

668338 Fits all XL 1200S models

668339 Fits all Softail models 00-17

668340 Universal 4 plug multi-fit set

Spark Plug Wire Separators

Machined from billet aluminum and

available in brilliant chrome or a red,

blue or black anodized finish with stylish

accent grooves. Sold each.

776444 17-24 Touring, 17-24

Trike, 18-24 Softail

777185 17-24 Touring, 17-24

Trike, 18-24 Softail

Gloss

668341 Fits all XL models 04-06

78412 Chrome

668342 Fits all XL models 07-20, except

08-13 XR1200/X

895447 Fits Touring 09-16 (repl. OEM

32313-08)

78413 Red

78414 Blue

78415 Black

6.66

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.67

EDITION 50

Pulstar Pulse Spark Plugs

Pulstar spark plugs generate up to 12% more horsepower and torque. They improve fuel

efficiency, throttle response. The Pulstar plugs come with iridium electrodes and a capacitor

built in for increased spark energy.

Note: For engines with performance modifications it is recommended to richen the air fuel mixture and slightly retard the timing.

688110 Pulstar plug 2PK for 86-20 Sportster, except 08-13 XR1200/X, 99-17 Dyna, 00-17 Softail,

99-16 Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike

688111 Pulstar plug 2PK for Evolution and Shovelheads

6

U-Groove Spark Plugs

• High-performance spark plugs for H-D models are ideally suited for all temperature ranges due to high-quality materials

• The special shape of the ground electrode produces a spherical spark, which prevents misfires

• Sold in pairs

Unit: Pair , Qty.: 1

PART# FITMENT OEM #

22012 78-81, 84 FX Shovel, 78-81, 84 FL Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 86-98 Touring 5R6A

22016 86-20 Sportster, 99-17 Dyna, 00-17 Softail, 99-16 Touring, 09-16 Trike 6R12

Spark Plugs

• Platinum-tipped high-performance plugs will maintain a precise gap longer for more consistent ignition performance

• Better mileage

• Side electrode is from high-chromium/nickel alloy for better spark at any voltage level

Unit: Pair , Qty.: 1

PART# FITMENT OEM #

22024 78-84 FL Shovel, 78-84 FX Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 86-98 Touring 5R6A

22023 86-20 Sportster, except 09-10 XR1200, 10-12 XR1200X, 99-17 Dyna, 00-17 Softail, 99-16 Touring, 97-02 M2, 97-98 S1,

97-99 S3, 09-16 Trike

6R12

6.68

APPAREL

SEATS &

TOURING

Copper Plus Spark Plugs

Spark Plugs including a wider-base insulator which provides an easier path to speed the transfer of heat and a longer insulator nose

containing a center electrode of pure copper inside of chrome-nickel to transfer heat between firings and help resist fouling.

Unit: Pack

ERP OEM NUMBER FITMENT PACK PACK PACK

6R10, RG6HCC, 18-24 Softail, 17-24 Touring, 15-20 Street, 17-24 Trike 920023

31600012

32302-09 29-52 Flathead, 32-55 Servi Car, 36-47 Knucklehead 22140

32303-47, 32305-48, 48-65 Panhead, 66-74 FL Shovel, 71-74 FX Shovel, 54-78 Sportster, 56-73 Servi Car 22115

32301-60

5R6A, N12YC, 32311- 78-84 FL Shovel, 78-84 FX Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 85-98 22129 031217

83, 32312-77, 32342-04 Touring

6R12, RA8HC, 32317-

86, 32362-04

4R, H8C, 32307-58,

31629-78

86-20 Sportster, (except 08-10 XR1200, 10-12 XR1200X), 99-17 Dyna, 00-17 Softail, 22122 031218

99-16 Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike

57-78 Sportster 22120

4R5, RL82YC, 32301-80 79-85 Sportster 22123

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

923256 3123932 3123212 3127634

GASKETS

TRANNY &

CLUTCH

Standard Spark Plugs

• OEM approved

• Triple-gasket sealing process

• Consistent performance

3122633 923259 3124339 3124339

• Spark plug of choice in millions of motorcycles

• Specified by more motorcycle manufacturers than any other spark plug company

• Sold in box of 10


PART# FITMENT DESCRIPTION OEM #

3122633 79-85 Sportster BPR6HS-10 4R5, RL82YC, 32301-80

3123212 48-65 Panhead, 66-74 FL Shovel, 71-74 FX Shovel, 54-78 Sportster B6L 32307-58, 31629-78,

32336-04

3123932 86-20 Sportster, (except 08-10 XR1200, 10-12 XR1200X), 99-17 Dyna, 00-17

Softail, 99-16 Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike

3124339 00-02 X1, 03-10 XB, 02-17 V-Rod, 15-24 Indian Bagger, (except 23-24 Challenger,

23-24 Challenger Dark Horse, 23-24 Challenger Limited, 23-24 Challenger Elite,

22 Challenger Dark Horse , 22 Challenger Limited ), 12-24 Indian Cruiser, 15-24

Indian Touring, (except 22-24 Pursuit Dark Horse, 22-24 Pursuit Limited, 23

Pursuit Elite)

3127634 91-98 Dyna, 84-99 Softail, 85-98 Touring, 85-94 FX Model, 78-84 FL/FX Shovel

except E78 models

DCPR7E 6R12, RA8HC, 32317-86,

32362-04

DCPR8E 10R12A, RA6HC, 32335-

04, 27671-01K, 3088051

BPR5ES11 5R6A, N12YC, 32311-83,

32312-77, 32342-04

923256 18-24 Softail, 17-24 Touring, 15-20 Street, 17-24 Trike CR9EB 6R10, RG6HCC, 31600012

923259 15-23 Indian Scout, 19-23 Indian FTR MR7F 3022662

923708 22 Challenger Dark Horse , 22 Challenger Limited , 23-24 Challenger, 23-24

Challenger Dark Horse, 23-24 Challenger Limited, 23-24 Challenger Elite, 22-24

Pursuit Dark Horse, 22-24 Pursuit Limited, 23 Pursuit Elite

LZMAR8AI-10 3070482

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.69

EDITION 50

6

Stator Rotor, Lectric, 38 Amp

for Harley-Davidson

ACCEL Lectric stator rotors are made for

high vibration and daily drive abuse. The

magnets are enclosed by stainless steel

to protect against dislodging and a super

thick housing and splines eliminate the

possibility of cracking.

607411 Accel Lectric Rotor 38/45 Amp.

for FXST 00-06, Dyna 04-05,

Touring 00-05 (repl. OEM 29981-

95)

Heavy Duty Forged Alternator

Rotor by Spyke

Thicker-than-stock black powder forged

steel rotors have encapsulated magnets

for durability. Features more steel

around the critical spline contact area for

better engagement. Ideal for high RPM

performance applications.

28597 Fits Softail 91-00 and Dyna Glide

models from 86-99

Rotors

895431 For models 70-03 (32, 18, 22,

32 Amp)(repl. OEM 29957-81B

/29956-70)

895432 For models 95-04 with 3 Phase

Stator, 38 Amp (repl. OEM 29981-

95)

895433 For models 95-04 with 45 Amp

system (repl. OEM 29999-97)

Compu-Fire Alternator Rotor

for S&S Shafts

Replacement rotor for Evolution Big Twins

using S&S sprocket shafts.

23226 Alternator rotor for 32 amp and

40 amp charging systems, for CC

#’s 23229

Stator

Mounting

Screws Unit: Pack

Replacement alternator stator

mounting bolts.

Spyke Super-Duty 32 Amp

Charging Systems

Heavy-duty forged steel rotors featuring

encapsulated magnets, thick gauge

stator windings with three rib plugs, and

durable solid-state voltage regulators, in

your choice of black or chrome finishes.

Fits all Big Twins from 70-99, (except Fuel

Injected models and TwinCams)

28849 With black regulator

28836 With chrome regulator

Stock Alternator Rotor

These are Original Equipment parts.

Components

75214 Rotor for all Big Twin models

from 82-05 (OEMs 29957-81B,

29957-85A)

PART# FITMENT

75272 91-06

Dyna, 89-

06 Softail

17268 95-05

Touring

DESCRIP-

TION

OEM

#

Pack of 4 2720 4

Pack of

10

QTY.

2918 10

6.70

APPAREL

SEATS &

TOURING

Accel Complete 38 Amp 3 Phase Charging

System Kit

• Heavy Duty Rotor features premium quality magnets to ensure

long life

• Stator is precision wound with premium copper to ensure long

life and the highest possible output

• Controlled by a premium chrome plated regulator

668052 Complete Charging System – Fits Softail models 01-06

Compu-Fire 3-Phase Charging Systems

These charging systems provide 25 amps at idle and 40 amps

continuously above 2.800 rpm. The unique narrow rotor and

stator combination fits the primary cases and voltage regulator

bolts on Softail and Dyna Glide models without any frame

modifications. The precision balanced vented rotor keeps the

stator cooler in closed primary systems to maintain maximum

output under all high-current draw conditions. The large flanged

seal spacer provides maximum support for the rotor and the

voltage regulator output is calibrated to 14.25 volts from idle on

up to red line.

610303 Fits Big Twins with enclosed primaries from 81-99

610316 Fits Big Twins with enclosed primaries from late 99-02

610304 Fits Big Twins with enclosed primaries from 03-06

(Except 06 Dyna, 06 Touring)

610305 Fits Big Twins with open belt drives from 81-99

610306 Fits Big Twins with open belt drives 03-06 (except 06

Dyna and Touring)

Compu-Fire Charging Systems

A must have for overloaded electrical systems!

• Made in the USA, delivers increased charging

• Systems include stator, rotor and voltage regulator

32 Amp Charging Systems

Each kit includes a stator, rotor and a black rectifier/regulator.

17016 Fits all Big Twin engines with Original Equipment sprocket

shafts from 81-99

23229 Fits all S&S Evolution Big Twin engines or stock engines

with S&S sprocket shafts

Replacement Parts

17030 32 amp for Evolution Big Twin models from 89-99

17014 Alternator rotor for CC #17016

23226 Alternator rotor for 32 amp and 40 amp charging systems,

for CC #’s 23229

17018 32 amp stator for CC#’s 17016 and 23229, for most carbureted

Evolution Big Twins from 89-99

895429

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

610327 610325

610324

895430

Stator and Rotor Kit

SMP stator-rotor kits available in 38A and 32A version including

spacer.

Unit: Kit , Qty.: 1


WHEELS, TIRES

& BRAKES

FRAMES

Replacement Parts for 3-Phase Charging

System

Replacement stator, rotor (vented) and regulator for 3-phase

charging systems.



610327 03-05 Dyna, 03-06 Softail,

03-05 Touring

610325 81-84 FL Shovel, 71-84 FX

Shovel, 85-94 FX Model,

91-98 Dyna, 84-99 Softail,

85-98 Touring

610324 Replacement Regulator for

610303, 610316, 610304,

610305, 610306

Replacement 40 Amp 3

Phase Vented Rotor

Replacement 40 Amp 3

Phase Stator

Replacement Regulator

895429 01-04 Softail, 04

Dyna

38 AMP

Unmolded

895430 89-94 FX Model, Except EFI models 32 AMP

91-98 Dyna, 89-99

Unmolded

Softail, 89-96

Touring

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.71

EDITION 50

923975 18876

895435

6

Stators

OEM replacement stator units meet or exceed factory standards. Some deliver a higher output specially when needed for a higher

electric consumption on the bike such as stereo systems, CB radios or charging devices for mobile handhelds etc..

FITMENT

PLUG ELECTRICAL

STYLE CURRENT

OEM # ACCEL MOTOR

FACTORY

STANDARD

MOTORCYCLE

PRODUCTS

00 Softail, 99-03 Dyna 32 AMP Unmolded E 32.0 29951-99 895435

00 Softail, 99-03 Dyna 38 AMP Unmolded E 38.0 29951-99 668028

00 Softail, 99-03 Dyna 38 AMP Unmolded Stator E 38.0 29951-99 899998

01-06 Softail, 04-06 Dyna 38 AMP Unmolded N 38.0 30017-01 668053

01-06 Softail, 04-06 Dyna 38 AMP Unmolded Stator H 38.0 30017-01 899999

02-05 Touring B 29987-02 668381

02-05 Touring 45 AMP Unmolded B 45.0 29987-02 895436

02-05 Touring 45 AMP Unmolded Stator B 45.0 29987-02 900002

04-06 Dyna, 01-06 Softail 38 AMP Unmolded N 38.0 30017-01 895439

06-16 Touring 50 AMP Unmolded M 50.0 29987-06 668375

06-16 Touring 50 AMP Unmolded Stator, 3 Phase M 50.0 29987-06 900003

07-13 Sportster 32 AMP Unmolded Stator G 32.0 29997-07 900004

07 Dyna, 07 Softail 40 AMP Unmolded Stator N 40.0 30017-07 900000

07 Softail, 07 Dyna 40 AMP Unmolded N 40.0 30017-07 668373

08-17 Softail, 08-17 Dyna 40 AMP Unmolded Stator M 40.0 30017-08 900001

18-24 Softail, 17-24 Touring, (except 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 Trike 48

AMP Unmolded Stator

K 48.0 29900042 923975

70-75 FL Shovel, 71-75 FX Shovel 18 AMP Unmolded, Plug A C 18.0 29965-70 56225

76-80 FL Shovel, 76-80 FX Shovel 17,8 AMP Molded D 17.8 29965-75 18871

76-80 FL Shovel, 76-80 FX Shovel 22 AMP Molded, Plug B D 17.0 29965-75 56226

81-84 FL Shovel, 81-84 FX Shovel, 85-88 FX Model, 85-88

Touring, 84-88 Softail 22 AMP Molded, Plug C


Touring, 84-88 Softail 22 AMP Unmolded, Plug C

F 22.0 29965-81 56227

F 22.0 29965-81 56228

84-90 Sportster Except E84 models 22 AMP Molded, Plug E L 22.0 29967-84 56222

89-94 FX Model, 91-98 Dyna, 89-99 Softail, 89-96 Touring

Except EFI models 32 AMP Unmolded, Plug D


Except EFI models 32 AMP Unmolded

J 32.0 29970-88 56229

J 32.0 29970-88 18876 895440

91-06 Sportster 17 AMP Unmolded Stator L 17.0 29967-89 640950

91-06 Sportster 22 AMP Unmolded L 22.0 29967-89 18877

97-98 Touring 95-96 EFI Touring models 38 AMP Unmolded E 38.0 29987-97 668029

97-98 Touring 95-96 EFI Touring models 40 AMP Unmolded

Stator

L 40.0 29987-97 640951

97-98 Touring 95-96 EFI Touring models 45 AMP Unmolded A 45.0 29987-97 895437

99-01 Touring 38 AMP Unmolded E 38.0 29987-99 668374

99-01 Touring 40 AMP Unmolded Stator E 40.0 29987-99 640952

99-01 Touring 45 AMP Unmolded A 45.0 29987-99 895438

6.72

A

B

C

D

E

APPAREL

SEATS &

TOURING

640951

900002

56225

56226

640952/9000002/899998

FOOT

CONTROLS

F

G

H

J

K

HAND

CONTROLS

LIGHTING

56227

900004

899999

56229

923975

ELECTRICAL

L

M

N

P

EXHAUST

17018

INTAKE

56222/640951/6400950

900001 900000

ENGINE

GASKETS

P

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

Replacement Stator

• Meets or exceed OEM Standards

• 32 AMP Versions available

• Perfect for overloaded electrical systems

Part#: 17018 , Plug Style: P , Fitment: 89-94 FX Model,

91-98 Dyna, 89-99 Softail, 89-96 Touring , Fitment Note:

Except EFI models , OEM #: 29970-88 , Unit: Each , Qty.: 1

Motor Factory Charging System Upgrade Kits

Enjoy a remarkable improvement in electrical performance by

installing one of these Motor Factory 32-amp systems. Each one

includes a Motor Factory alternator, rectifier/regulator and an

alternator rotor. Fit all Big Twins except Twin Cam Models from

70-99.

56230 With black rectifier

56232 With chrome rectifier

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

Crankcase Stator Plug Wire Retainer

Part#: 919714 , Fitment: 70-84 FL Shovel, 71-84 FX Shovel,

85-94 FX Model, 84-99 Softail, 85-98 Touring, 91-98 Dyna ,

Color: Stainless Steel , OEM #: 45095-85 , Unit: Pack , Qty.:

10

Stator Mounting Kit

030608 Includes lock plates, plug retainer and hardware. Fits Big

Twins 70-13


LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.73

EDITION 50

6

Motor Factory Finned Rectifier/Regulators

These rectifier/regulators utilize the latest state-of-the-art surface-mount technology. Unlike many products on the market today,

our rectifier/regulators are made with screen-printed circuit boards and ceramic components which lower operating temperatures

for longer life without temperature-related failures. They deliver improved electrical performance for lighting, battery and ignition

which also helps protect valuable power sources and wiring. Standard black finish with polished fins or fully chromed. Engineered in

the USA.

See table for applications.

Motor Factory Solid-State Voltage Regulators for Generator Models

Solid-state voltage regulators replace earlier-style mechanical regulators on generator-equipped bikes. No battery needed for lights if

used with magneto. Covered by our exclusive ‘High Voltage’ limited warranty that effectively extends coverage to one full year from

date of installation.

See table for applications.

Regulators (for more images visit our Dealer Store)

Replacement regulators manufactured under highest standards to replace the OEM units. They meet or exceed the factory quality

by far. To make the identification easier we added the connecting Plug-Style in the table chart which can be identified on the right

hand page.

Replacement regulators manufactured under highest standards to replace the OEM units. They meet or exceed the factory quality by

far.


FITMENT PLUG STYLE OEM # BLACK CHROME

00 Softail H 74512-00 648362 648363

01-06 Softail K 74540-01, 74610-01 648364 648365

02-03 Touring P 74505-02 648384 648385

04-05 Dyna N 74631-04 648378 648379

04-05 Touring S 74505-04 648386 648387

04-06 Sportster R 74523-04 648368 648369

06-07 Dyna Q 74631-06 648380

06-08 Touring T 74505-06 648388 648389

07-08 Sportster, (except 08 XR1200) T 74546-07 648370 648371

07 Softail M 74540-07 648374 648375

08-17 Dyna T 74631-08 648382 648383

08-17 Softail OEM# 74540-08, 74540-11 T 74540-08, 74540-11 648376 648377

08-17 V-Rod T 74440-08 899982 899983

09-13 Sportster, 08 XR1200 T 74711-08 648372 648373

09-16 Touring, 09-16 Trike T 74505-09 899980 899981

17-23 Touring, 24 FLHRXS, 24 FLTRK, 24 FLHTK, (except 23 W 74700025 928085

FLHXSE, 23 FLTRXSE), 17-24 Trike

66-77 Sportster, 65 Panhead, 66-69 FL Shovel Solid State

G 74507-85, 74510-64, 74510-65 25369

Regulator to replace Mechanical Regulators on Generator

Models

70-75 FL Shovel, 71-75 FX Shovel B 74510-70 25358 25365

76-80 FL Shovel, 76-80 FX Shovel C 74510-75, 74512-79 25359 25366

77-81 Sportster E 74504-78 25354 25361





A 74515-86, 74516-86, 74513-85,

74512-84, 74513-82

A 74515-86, 74516-86, 74 513-

85, 74512-84, 74513-82

25360

25367

82-84 Sportster Except L84 models D 74505-82, 74504-82 25355 25362

84-90 Sportster Except E84 models F 74523-84 25357, 25364


J 74519-88, 74537-93 25353 25372

Except EFI models

91 Sportster F 74523-91 25349 25350

92-93 Sportster F 74523-92 25351

94-03 Sportster L 74523-94, 74490-00 25328 25329

97-01 Touring H 74505-97 648366 648367

99-03 Dyna H 74518-99, 74561-99 648360 648361

6.74

APPAREL

SEATS &

TOURING

668024 648377 648364 648366

25328

FOOT

CONTROLS

PLUG CHART REGULATORS

HAND

CONTROLS

A

B

C

D

E

LIGHTING

ELECTRICAL

G

H

J

K L M

EXHAUST

N

P Q

R S

T

U

INTAKE

W

ENGINE

GASKETS

17030

TRANNY &

CLUTCH

DRIVELINE

Regulator Deutsch Connector Kit

• Connectors and terminals

• For XL 94-03 models

670305 Regulator connector kit (OEM 74119-98BK)

Regulator Wiring Cover

This kit has everything you need to braid your existing regulator

wiring.

893427 Regulator wiring cover

23235

Compu-Fire High Performance Series Voltage

Regulators

• New generation series regulator obsoletes outmoded shunt

regulators

• Black powder coated, bolt-on replacements

• Voltage output is suitable for maintenance-free batteries

• Reduces load on stator and extends stator life

• Reduces engine drag for extra power

• Delivers high performance at an exceptional cost!


17031 22 amp for Big Twin models from 81-88

17035 22 amp for Sportster models from 91-99 and Buell models

(except Blast and Firebolt models) from 93-96

Compu-Fire Chrome Billet Series Voltage

Regulators

Offering the same sophisticated technical features as their line of

OEM-style regulators, but in an attractive “bullet-proof” chrome

billet case with mounting bracket.


WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.75

EDITION 50

6

OEM Replacement

Voltage Regulator

• Solid State Rectifier/Regulators

• Plug Style

• Replaces OEM unit

Fitment: 08-17 Softail , Description:

OEM# 74540-08, 74540-11 , OEM #:

74540-08, 74540-11 , Unit: Each , Qty.:

1

PART#

COLOR

888373 Black

888372 Chrome

19284 19282

Alternator Plug Retainers

Standard and chromed heavy-duty retainers

prevent rectifier/regulator plugs from working

loose. Fit all Big Twin models (except EFI and Twin

Cam models) from 70-99.

19284 Standard retainer, stainless steel

(held by engine case bolts) card

of 5

19282 Chrome-plated heavy-duty model

(held by front motor mount bolt)

card of 5

12492

Accel Mechanical Regulators

Top-quality American-made units

feature heavy-duty shock mounted steel

bases, vibration-resistant internal wire

connections, fiber and mylar insulated

pads, and large diameter contact surfaces.

12-Volt Bosch-Style

Fits XLH from 65-66 and XLCH from 65-77.

12492 Chrome

Precision Voltage Regulator

Cover

Conceal the factory regulator with this

direct bolt-on aluminum cover that’s easy

to install and sure to stand out. Vertical

grille design adds unique custom style to

the lower frame area.

PART# FITMENT COLOR

776427

776428

17-24 Touring,

(except 23-24

FLHXSE, 23-24

FLTRXSE, 24 FLHX,

24 FLTRX, 24

FLTRXSTSE), 17-24

Trike

17-24 Touring,

(except 23-24

FLHXSE, 23-24

FLTRXSE, 24 FLHX,

24 FLTRX, 24

FLTRXSTSE), 17-24

Trike

chrome

Gloss

Alternator Plug Retainer

Comes with self-tapping screws unlike the

Original Equipment part it replaces. Fits

Big Twins from 70-99. Sold on a card of 5.


Regulator Brackets

These chrome brackets mount solidstate

regulators on models with solidlymounted

motors.

19261 Fits Big Twins including Softail

models from 76-86 (repl. OEMs

74533-75, 74534-80)

Chrome Regulator Cover for

Touring Models by Kuryakyn

A two-piece design that uses a stamped

steel base and a chrome composite top

to cover your stock voltage regulator.

Routing holes for the wires and a wellvented

design keeps your regulator

running cool. Two functional and

decorative chrome fasteners add the

finishing touch.

600393 Fits all Touring models from

97-07

640912

640911

Regulator Cover for Softails

by Kuryakyn

A stock voltage regulator normally fades

into the background, but with this sharp

new Voltage Regulator Cover it will

be right in the spotlight! Deep fins &

beautiful chrome, it really stands out! For

01-17 Softails.

605208 Softail regulator cover

Chrome Rectifier Regulator

Mounting Bracket

Fits rubber-mounted 5-speed models

from 80-03 (except Dyna Glide models).

This reproduction steel bracket has an

extra set of holes for a second mounting

position when relocating the rectifier/

regulator on custom applications.


Voltage Regulator Covers

All are chrome finished with all necessary

mounting hardware. Just bolt it on.

640911 Fits Softail models from 89-99

(repl. OEM 74578-97)


(repl. OEM 74597-01)

640913 Fits Dyna Glide models from

91-03 (repl. OEM 74577-97)

640914 Fits Sportster models from 85-03

(repl. OEM 74579-97)

6.76

APPAREL

SEATS &

TOURING

Delco Type Voltage Regulator

• OEM equivalent electro-mechanical,

voltage regulator

• For 12V Generator

• Heavy duty, shock mounted steel base

• Vibration resistant internal wire

connections

• Large diameter contact surfaces

• Black enamel

Part#: 928099 , Fitment: 65 Panhead,

66-69 FL Shovel, 65-77 XLH , Color:

Black , OEM #: 74510-64 , Unit: Each ,

Qty.: 1

All Balls 12V Generators

These premium units fit Big Twin and

Sportster models. They feature machine

wound armatures, hardened shafts and

premium bearings are used throughout.

Available in standard black finish or show

quality chrome. Fits 65-69 big twins and

65-81 Sportsters with 12V systems.

668420 Generator 12V black

Generator Brush Set by

Standard

Replacement brush set for all two brush

generators from 58-64.

668343 Brush set

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

Motor Factory Generator

Regulator with Integral

Charging Monitor

Cure electrical system reliability problems

with the Motor Factory solid state

regulator with integral charging LEDs.

It attaches directly to the end of the

generator and is enclosed in a die-cast

aluminum housing with polished fins

on the end. Solid state components are

completely sealed in epoxy to eliminate

moisture and vibration problems giving

completely reliable service. Green and red

LEDs give continuous readout of system

performance. Green wire to field, red wire

to armature and black wire to battery.

Requires battery.

28092 Fits all Sportster models from

65-77 and FL models from 65-69

with 12-volt generators

Accel Generator Armature

This American-made 12-volt armature

features: heavy gauge copper wire

windings; precision- machined and

finished shafts; long-life, solid copper

commutator and heavy service lamination

segments.


and Big Twins from 65-69 (repl.

OEMs 30851-65A, 30851-86T)

Precision Starter Cover

PART# FITMENT COLOR

776416 17-24 Touring, 17-24

Trike

776446 Gloss

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

12V Generators by Cycle

Electric

Quality generators made in the USA.

Available with or without built in regulator.

Model without regulator requires current

limiting regulator (10 A) to prevent damage

due to excess current draw. Fits 65 Panhead,

66-69 FL Shovel, 65-81 Sportster

685470 Generator with regulator

685471 Generator only

685472 Repl. regulator

Battery Eliminator Kit by

Accel

Boost spark voltage at cranking and

eliminate flickering lights at low speed

with ACCEL Motorcycle battery eliminator.

Includes shock-resistant mounting clamps

and attachment hardware. Made in the

USA

668371 Battery eliminator


Starter Mount Cover

When combined with our Starter Cover,

our die-cast, chrome-plated Starter Mount

Cover completely dresses up the exposed

starter on 9-16 Touring Models. They are

a snap to install & put the finishing touch

on this area.

Part#: 777779 , Fitment: 09-16 Touring,

09-16 Trike , Fitment Note: Will also

fit ‚07-‘08 models if equipped with

a 2-1 or staggered dual exhaust.

Compatible with One-Piece Kuryakyn

inner primary cover. Not compatible

with Kuryakyn two-piece inner

primary cover. , Color: Chrome , Unit:

Each , Qty.: 1

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.77

EDITION 50

644068

899977

6

Motor Factory Hitachi-Type

Starter Motors

The latest in starter technology

performance has been integrated in

this starter. With heavy duty bearings

that provides better reliability, and

higher torque output for dependable

starts. Fits 73-88

644072 Black starter motor assembly

(repl. OEM 31570-73)

644073 Chrome starter motor

assembly (repl. OEM 31559-

89T)

28606 Chrome starter motor end

cover (repl. OEM 31565-67)

28624 Drive gear end ball bearing,

fits all Hitachi starters on

Big Twins from 73-88 and

Sportster models 74-76 (repl.

OEM 31583-73)

Motor Factory Prestolite-

Type Starter Motors

Reproductions of the Original

Equipment Prestolite electric starter

motor used on many models from

66-82. Chrome end cover kit and

replacement parts are also available.

644070 Black starter motor assembly

(repl. OEM 31458-66TA)

644071 Chrome starter motor

assembly (repl. OEM 31463-

88T)

28606 Chrome starter motor end

cover (repl. OEM 31565-67)

28604 Drive gear end ball-bearing,

fits all Prestolite starters on

Big Twins from 66-82 and


or 77-80 (repl. OEM 31539-

66)

High Torque Starter

The most common failure of starter motors is

the starter clutch. All Motor Factory starters are

equipped with a heavy duty starter clutch that

features wider intermediate gears and a much

stronger than stock one-way bearing.


PART#

FITMENT

COLOR

OEM #

POWER

KW

644068 89-93 FX Model, Chrome 31552-89, 1.8

91-93 Dyna, 89-

31553-90

93 Softail, 89-93

Touring

644069 94 FX Model,

94-05 Dyna, 94-

06 Softail, 94-06

Touring

899977 94-06 Softail, Alumi-

Touring models, nium,

spacer for the Raw

oil sproud

needed

Chrome 31553-94, 1.8

31558-94,

31559-99,

31558-94,

31335-03

31553-94, 2.0

31558-94,

31559-99,

31558-94,

31335-03

693871 693870 923966

923966 923966

899978 644060

OEM Replacement Starter

High-Quality replacement starter units.

Power: 1.4 kW, Unit: Each , Qty.: 1

644062 644064

PART# FITMENT FITMENT NOTE COLOR

693870 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Chrome

693871 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Black

644060 94 FX Model, 94-05 Dyna, 94-06 Softail, 94-06 Touring Touring models, spacer for the oil sproud Aluminium, Raw

needed

644062 94 FX Model, 94-05 Dyna, 94-06 Softail, 94-06 Touring Touring models, spacer for the oil sproud Black

needed

644064 94 FX Model, 94-05 Dyna, 94-06 Softail, 94-06 Touring Touring models, spacer for the oil sproud Chrome

needed

644061 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Aluminium, Raw

644063 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Black

644065 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Chrome

923966 81-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1 Black

899978 81-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1 Chrome

6.78

APPAREL

SEATS &

TOURING

36251

36265

FOOT

CONTROLS

Accel Generator

Repair Kit

Top-quality American-made

generator repair kit for 12-

volt, 2-brush generators. Fits

FL models from 65-69 and

Sportster models from 65-81.

Kit includes a pair of brushes,

gasket, seal and packet of

grease.

25515 Repair kit

Compu-Fire 1084 Gear

Set

Engineered to increase the

starter motor torque by

lowering the gear ratio of

the pinion gear to the clutch

ring gear. When used as a

replacement for the 9:66 ratio

gear sets, a 15% increase in

torque is obtained. Can also

be used as a re-placement for

the weak 10:102 ratio gear sets

which are prone to breaking.

610302 Fits all Big Twins from

98-06 (except 06 Dyna)

Chrome Generator

End Cover Kit

This die-cast end cover is the

perfect finishing touch for the

generator on both stock and

custom motorcycles. It installs

easily in minutes and fits all


as well as 58-69 Big Twins.


83T

Generator Mounting

Hardware from

Colony

High quality generator

mounting hardware made in

USA by Colony. Fit Big Twins &

Sportsters as noted.

Chrome Sockethead Screw

Kits


71-E84

36265 Fits Big Twins 58-69

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

921785

921785/921786 921785

921783

DRIVELINE

WHEELS, TIRES

& BRAKES

030393

030394

Starter

Starters feature all new construction and are way stronger than the Factory units. Available in black or chrome/polished finish.

Starters include a special conversion jackshaft bolt that allows these starters to fit most Big Twins.


PART# FITMENT COLOR OEM # POWER KW

030393 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Black 31552-89, 31553-90, 31553-94 1.4

030394 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Chrome 31552-89, 31553-90, 31553-94 1.4

030395 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Chrome 31552-89, 31553-90, 31553-94 1.7

921784 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Black 31618-06, 31621-06 1.4

921785 18-24 Softail Black 31400057 1.4

921786 17-24 Touring, 17-24 Trike Black 31400053 1.4

921783 81-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1,

03-10 XB

Black 31390-86, 31390-91 1.4

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.79

EDITION 50

6

All Balls Early Model Starters

New, up to date 1.4 KW designs that replace Hitachi and

Prestolite type starters. They are more compact, but generate

twice the shaft speed and 50% more power than the original

versions. Available in with black or chrome finishes. A great

remedy for those hard to start big-inch motors!

Black

030396 Hitachi starter (repl. OEM 31570-73)

030398 Prestolite starter (repl. OEM 31458-66TA)

28675

28664

28666

693871

PMGR 1.6 kW Starter for Early Big Twins by

Compufire

Permanent Magnet Gear Reduction (PMGR) Starter Motor for all

65-88 Harley-Davidson Big Twins. Mates to the OE starter gear

case and output shaft. 1.6 kW of cranking energy.

610328 PMGR starter

693870

M.E.S. Starters for Late-Model Twin Cams

1.4kw gives your bike more cranking power. Starters feature

M.E.S. lifetime starter clutch. Available in either a chrome-plated

or black finish.

Fits all06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike models

693870 Chrome

693871 Black

Spyke SuperTorque 1.4KW Starters

High-performance motors demand high-performance starting

power, which is exactly what Spyke starters are built to provide.

Full 1.4 KW rating, which is up to 25% more torque than stock.

Increased cranking speed and low amperage-draw design

delivers fast, reliable starts with less battery drain.

For Big Twins from 94-06 (except 06 Dyna)

28661 Black

28596 Polished

For Big Twins from 89-93

28660 Black

For Big Twins from 86-88

28663 Black80-86 FXWG-FXSB, 84-Early 86, FXST

82-Classic, 83-85 FLH-80, 80-84 Solid Mount w/

Rear Belt

28946 Polished

For Big Twins with Rear Chain Drive (except rubbermounted

Models) from L79-85

28664 Polished

For Rubber-Mounted Big Twins (except enclosed rear

chain) from 80-85

28675 Polished

For Big Twins with Rear chain Drive from 65-E79

28666 Polished

For Sportster and Buell models 81-20

28669 Black

Starter Terminal Rubber Boot

Part#: 688646 , Fitment: 89-03 Sportster, 89-94 FX Model,

91-94 Dyna, 89-94 Softail, 89-94 Touring , OEM #: 70578-89

, Unit: Pack , Qty.: 5

6.80

APPAREL

SEATS &

TOURING

Compu-Fire ‘Gen III’ Starters

The ‘Gen III’ turns over a full 2kw of starting power while

only drawing 175 amps from the battery. This chrome and

polished starter features a removable jackshaft coupler, ultra

powerful neodymium magnets, innovative high torque clutch

and 6:1 planetary gear reduction. It has the power to start

large displacement, high-compression motors, even without

compression releases. All in a short, compact package.

643882 Fits all Evolution and Twin Cam 88 Big Twins from 90-06

(except 06 Dyna)

643883 Fits all big bore Twin Cam 95 Big Twins from 90-06 (high

speed) (except 06 Dyna)

Easy Starter Kits for Big Twin Models

Improves starting on high-compression big inch engines through

an improved starter-to-clutch basket gear ratio. Complete kits

include a clutch basket for Big Twin models with a 66-tooth

starter ring and a 9-tooth starter pinion gear.

17664 Complete kit for Big Twin models from 94-97

17665 Complete kit for Big Twin models from 98-06 (except 06

Dyna)

Replacement Parts

17448 Clutch basket with ring gear for CC #17664

17663 Clutch basket with ring gear for CC #17665

23185 66-tooth starter ring gear with hardware fits only CC

#17420 clutch basket and OEM 37707-90

23183 9-tooth pinion gear

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

640644

‘The

Slugger’

ENGINE

GASKETS

1.5 kw Starter for late Twin Cams by Terry

Components

Available in chrome or black finish

Fits all 06-17 Dyna and 07-17 Softail and 07-16 Touring

models

640685 Chrome

640686 Black

Ring Gear Conversion Kits

Ring gear conversion kits are precision machined from 8620 steel,

heat treated and case hardened. Kit consists of ring gear and

bolts.

66T Conversion Kit for OEM Baskets

893669 Big Twin 98-06 (except Dyna 06)

84T Conversion Kit for OEM Baskets

893665 Big Twin 90-93

893666 Big Twin 94-97

47900 47909

47901

High-Torque Starters by Terry Components

1.8KW ‘The Slugger’ Starters

• ‘Universal’ starters offer superior windings, high tolerance

heavy-duty clutch, and thicker commentators that resist flying

shorts

• Static balanced for smoother operation

• Low-profile design clears the electronic speedometer sender

for easy installation

• Puts out the same amount of torque as a 2.0KW with less

amperage drain

640644 Polished/Chrome for Big Twins from 89-93

640645 Black wrinkle for Big Twins from 89-93

640646 *Polished/Chrome for Big Twins from 94-06 (except 06

Dyna Glide models)

640647 *Black wrinkle for Big Twins from 94-06 (except 06 Dyna

Glide models)

*Note: Installation of these starters on Touring models will require the additional purchase of a

CC #640643 Oil Pan Dipstick Adapter.

Replacement Parts for Terry Starters

47900 Solenoid repair kit (also fits most Original Equipment

and aftermarket Nippon Denso starters)

47901 Starter brush holder for 1.4KW starters

47902 Starter brush holder for 1.6KW and 2.0KW starters

47909 Starter clutch for 1.2KW, 1.4KW and 1.8KW starters

47910 Starter clutch for 1.6KW and 2.0KW starters

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.81

EDITION 50

28626

28811

050434

050437

28818

050443

25504

25531

644074

28074

6

09778

28627 12082

Replacement Starter Parts for Big Twin and Sportster Models

Listed below in CC part number order. Sold each unless noted otherwise.

09778 Starter housing bearing (replaces OEM 9062) sold each

09782 Fits 4-speed Big Twin models with Prestolite motor 65-E79 (repl. OEM 31465-65) 1/4-20 threads

12082 O-ring, starter crank, 37-86 (replaces OEM 11101). Pack of 10.

25504 Starter drive (Accel) for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A).

25531 Starter drive for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A). Made in USA

28074 Needle bearing for Sportster models from 67-80, and FX and FL chain drive models from 65-84 (replaces OEM 9063)

28626 Starter gear shift lever for all 4-speed Big Twin chain drive models from 65-84 (replaces OEM 31445-65A)

28627 Oil deflector plate for 4-speed FL chain drive models from 65-82, and 4-speed FX chain drive models from 71-85 (replaces OEM

60516-65A)

28811 Pivot screw, gear shift lever for inner primary cover on all 4-speed Big Twins from 65-86 (replaces OEM 31478-65A). Sold in 5 pack.

Top screw.

28818 Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Sold

in pairs.

050434 Shifter collar starter shaft for all 4-speed Big Twin chain drive models from 70-84 (replaces OEM 31503-70)

050437 Snap ring for 4-speed FX and FL models from 65-88 and Sportster models from 67-80 (replaces OEM 11039). Pack of 10.

050443 Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Made

in USA. Pack of 5.

644074 Starter drive (replaces OEM 31443-65A)

09782

25020

54061

25306

Generator Parts

Listed below in CC part number order

25020 Bearing, drive gear. Fits 58-81 Big Twin and Sportster models (repl. OEM 9007)

25306 Oil seal, end cover. Fits 61-73 Big Twin and Sportster models (repl. OEM 12002). Pack of 5.

54061 Oil seal, drive gear. Fits 46-81 Sportster and Big Twin models (repl. OEM 30145-46A) pack of 10

6.82

APPAREL

893531

893514

SEATS &

TOURING

893507

893534

FOOT

CONTROLS

893509

893508

893514

893515

893533

Pinion Gears by Primo Rivera

893529 9 tooth pinion gear Big Twin

Brute 4 and 5 belt drives with 66

tooth ring gear


94-06 (except Dyna models 06

with 66 tooth ring gear)


90-93 with 84 tooth ring gear


94-06 (except Dyna models 06


HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

893512

893516

ENGINE

Starter Ring Gears for Big

Twins by Rivera

High quality replacement starter ring

gear kits for fitment on Primo belt drive

baskets. They are available with 66 tooth,

102 tooth and 106 tooth configurations

(ring gear bolts are included). There is

also an 84 tooth kit sold with matching 10

tooth pinion gear for 90-93 & 94- models

running a Brute lll or Brute lll Extreme.

893507 66 teeth Big Twins 37-84 with

rivets for early belt drives 3 holes

893508 66 teeth Big Twins 37-84 with

bolt model Brute , classic , Brute

2

893509 84 teeth Big Twins 90-93 fits with

10 teeth pinion gear Brute 3 /

Extreme

893511 84 teeth Big Twins 94-06 fits

with 10T Pinion Gear Brute 3 /

Extreme,

(except 06 Dyna)

893512 106 teeth Big Twins 07-, Dyna

06- with Bolt Brute 3 Extreme / 4

Extreme

893513 102 teeth Big Twins 98-06 (except

06 Dyna models) chain drive

Seal Kit Starter Housing &

Shift Lever by James Gaskets

667114 65-81, Shovelhead

893517

Ring Gear Conversion Kits by

Primo Rivera

Specially designed kits which allow you

to convert existing stock ring & pinion

combinations to the more advantageous

combos offered by a 66 tooth ring gear

with a 9 tooth pinion gear for 94-06

Big Twins (except ‘06 Dyna Models) or

a middle of the road 84 tooth ring gear

with a 10 tooth pinion gear which will

offer more starter motor torque on the

early models yet help prevent ring gear

breakage from starter kickback on the

later models equipped with 102 tooth ring

gears.

893514 66 teeth / 9 teeth Big Twin 94-97

893515 66 teeth / 9 teeth Big Twin 98-06

(except 06 Dyna models)

893516 84 teeth / 10 teeth Big Twin

90-93


94-97


98-06 (except 06 Dyna models)


Starter Jackshaft Assemblies

by Rivera Primo

893521 Without pinion gear for Big

Twins 89-93

893522 Without pinion gear Big for

Twins 94-06 (except Dyna models

06)

893523 For Big Twins 89-93 (except those

with 10 tooth pinion gear or use


893524 For Big Twins 94-06 (except Dyna

Models 06, those with 10 tooth

pinion gear or use with 84 tooth

ring gear)

893525 For Big Twins 94-06 (except Dyna

models 06, with 9 tooth pinion

gear or use with 66 tooth ring

gear

893528 For Big Twin 94-06 (except Dyna

models 06 , with 10 tooth pinion

gear or use with 102 tooth ring

gear)

Starter Shaft Assemblies

Starter shaft assemblies are precision

machined from aircraft quality steel, heat

treated and black oxide coated.

For Big Twin 94-06 (except Dyna 06)

For Big Twin 90-03

893653 84T

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.83

EDITION 50

Replacement Starter Jackshaft

Kits

Complete jackshaft kits include starter

shaft, coupling, pinion gear, clips, spring,

locktab, washers and screws.

Starter Shaft Bolt Lock Tabs

Part#: 924480 , Fitment: 94-05 Dyna,

94-06 Softail, 94-05 Touring, 94 FX

Model , OEM #: 33126-94 , Unit: Pack

, Qty.: 10

921763

28380 10-tooth for Big Twins from 94-06

(except 06 Dyna)

6

628370 9-tooth for 94-06 Big Twins from

when using a 66-tooth starter

ring gear on 94-06 models

(except 06 Dyna)

28381 9-tooth for Big Twins from 89-93

Replacement Starter Motor

Parts

Listed below in OEM part number order.

All parts are sold each unless noted

otherwise.

3 5/8"

921764

75279 Gear shaft screw for Big Twins

from 94-05 (repl. OEM 4358) pack

of 10

75281 Retaining ring (repl. OEM 11248)

pack of 10

75276 Pinion gear for Big Twins from

94-05 (repl. OEM 31342-94)

921765

75288 Thrust washer for Big Twins from

89-93 (repl. OEM 31430-93)

75277 Thrust washer for Big Twins from

94-03 (repl. OEM 31430-94) pack

of 5

28382 Coupling for Big Twins from

89-93 (repl. OEM 31548-90)

75289 Lockplate for Big Twins from

89-93 (repl. OEM 33126-93)

75278 Lockplate for Big Twins from

94-05 (repl. OEM 33126-94) pack

of 5

28384 Extension shaft for Big Twins

from 89-93 (repl. OEM 33127-90)

92200 Starter shaft bushing for Big

Twins from 89-93 (repl. OEM

33445-89)

92201 Starter shaft bushing for inner

primary on Big Twins from 94-05

(repl. OEM 33445-94)

92214 Starter shaft bushing for outer

primary on Big Twins from 94-05

(repl. OEM 33446-94)

Spyke Grind-Free Jackshaft Kit

This Grind-Free jackshaft with 9 tooth

pinion gear fixes the grind associated with

many 3“ open belt drives that utilize onepiece

jackshafts. The grind-free is a three

piece unit with ramped teeth and enough

flex to integrate seamlessly with any belt

drive.

683394 Fits Big Twin models from 94-06

with 3” open-belt drive

(except 06 Dyna)

28678

Spyke Starter Jackshaft Kits

Includes starter shaft extension, couplings

and components for complete starter

installation.

One Piece Jackshaft Kit

Unit: Kit , Qty.: 1


921763 89-93 FX

Model,

91-93 Dyna,

89-93

Softail, 89-

93 Touring

921764 94 FX

Model,

94-05

Dyna, 94-06

Softail, 94-

06 Touring

921765 94 FX

Model,

94-05

Dyna, 94-06

Softail, 94-

06 Touring

9 Tooth

10 Tooth

9 Tooth Conversion

Starter Bearings

Replacement bearings for Prestolite and

Hitachi starter motors. Sold each.


(except 06 Dyna)


28604 Drive gear end ball-bearing, fits

all Prestolite starters on Big Twins

from 66-82 and Sportster models

from 67-73 or 77-80 (repl. OEM

31539-66)

28624 Drive gear end ball bearing, fits

all Hitachi starters on Big Twins

from 73-88 and Sportster models

74-76 (repl. OEM 31583-73)

6.84

APPAREL

28627

SEATS &

TOURING

28626

Starter Gear Shift Lever and

Oil Deflector Plate

Fit all Big Twin models with 4-speed

transmissions and rear chain drives from

65-84 (except 83-84 FL).

921760 921761

Heavy Duty Starter Drive by

MES

A typical starter drive gear contains five

rollers. This starter drive gear contains six

rollers providing a more reliable starter

gear, and less wear.

644074 Starter drive (replaces OEM

31443-65A)

FOOT

CONTROLS

HAND

CONTROLS

28626 Starter gear shift lever for all

4-speed Big Twin chain drive

models from 65-84 (replaces OEM

31445-65A)

LIGHTING

28627 Oil deflector plate for 4-speed FL

chain drive models from 65-82,

and 4-speed FX chain drive models

from 71-85 (replaces OEM

60516-65A)

921762 921768

921767

Accel Starter Drive

This unit fits all electric start models from

65-88 (except 81-88 Sportster models).

25504 Starter drive (Accel) for all Big

Twin models from 65-88, and


(replaces OEM 31443-65A).

ELECTRICAL

EXHAUST

INTAKE

ENGINE

Starter Motor Housings

Replacement starter motor housings that

duplicate the Original Equipment parts

which commonly have the mounting ears

broken off. Needle bearing not included.

09782 Fits 4-speed Big Twin models with

Prestolite motor 65-E79 (repl.

OEM 31465-65) 1/4-20 threads

09778 Starter housing bearing (replaces

OEM 9062) sold each

921770

Starter Drive

• Direct OEM replacement


Starter Drive Clutch by Spyke

Stock replacement for OEM 31663-90. For

Big Twin 90-05, XL883 95-02, XL1200-Buell

91-03.

28960 Starter clutch (repl. OEM 31663-

90)

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Heavy Duty Starter Drive

Beefier than the factory part for longer

life with high torque starters. Fits all

electric start models from 65-88 (except

81-88 Sportster models).

25531 Starter drive for all Big Twin

models from 65-88, and Sportster

models from 67-80 (replaces OEM

31443-65A). Made in USA

PART# FITMENT OEM #

921760 91-94 FX Model,

91-05 Dyna, 91-

06 Softail, 91-06

Touring

921761 89-90 Softail, 89-90

Touring, 89-90 FX

Model

921762 06-17 Dyna, 07-

17 Softail, 07-16


921767 67-80 Sportster,

66-84 FL Shovel,

71-84 FX Shovel,

85-88 FX Model,

85-88 Touring, 84-88

Softail

921768 81-20 Sportster,

97-02 M2, 97-98 S1,

97-99 S3, 99-02 X1,

03-10 XB

921770 18-24 Softail, 17-24


31663-90,

31516-94

31544-90

31633-07A

31443-65A

31556-91D

693872

Starter Clutch by M.E.S.

693872 Fits 06-17 Dyna, 07-17 Softail and

07-16 Touring models

644066 Fits all 1.2 kw, 1.4 kw and 1.8

kw on all Big Twin models from

90-05

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.85

EDITION 50

25008

668348

Starter Drive

668348 81-90 XL starter drive

895445 91-06 Big Twins (repl. OEM 31663-90)

(except 06 Dyna)

895445

895434

6

High Quality Delco Remy Style Starter Relay

Starter relay reduces the voltage drop in single fire ignition

applications during cranking and will allow full 12 volt battery

voltage to the module and coil.

Part#: 920510 , Fitment: 67-68 FL Shovel, 71-74 Sportster ,

OEM #: 71455-67B , Unit: Each , Qty.: 1

Starter Solenoid Repair Kit

Kit includes seals, gaskets, solenoid plunger, copper terminals

and contacts.

25008 For Big Twin models 89-06 (repl. OEM 31604-91)

895434 For Big Twin 65-83, Sportstser 67-80 (repl. OEM 71465-

85T)

668349

668350

Starter Solenoid

• OEM Replacement


921766 921769

PART# FITMENT OEM #

921766 67-80 Sportster, 65 Panhead, 66-84 FL 71469-65B

Shovel, (except 80-84 FLT, 81-84 FLTC),

71-84 FX Shovel, (except 82-84 FXR, 82-84

FXRS, 83-84 FXRT, 84 FXRSDG), 84-88 Softail

921769 18-24 Softail, 17-24 Touring, 17-24 Trike

Standard Starter Solenoids

Solenoids for 4 speed and 5 speed Big Twins.

Starter Solenoid for Big Twin 65-81 Single Bracket


Starter Solenoid for Big Twin 80-86 Dual Bracket


895442

895441

921758 921759

Solenoid Chrome

895441 For FL 65-84, XLH 76-78, FXE/F/S 71-85, XL 79-80, FX/FXE/

FXEF80 79-85,FXB 80-85, FXSB 83-85,FXST 84-88,FXWG

85-86 (Repl. OEM 71469-65B, 71469-69)

895442 For FLT 80-88, FXR/P 82-88 (Repl. OEM 31489-79B,

31511-90T,31526-81B)

6.86

Starter Solenoid Rebuild Kit

Unit: Kit , Qty.: 1

PART# FITMENT OEM #

921758 81-20 Sportster, 97-02 M2,

97-98 S1, 97-99 S3, 99-02

X1, 03-10 XB

921759 06-17 Dyna, 07-17 Softail,

07-16 Touring, 09-16 Trike

31603-91

31604-06

26430 668377

Starter Solenoids (Single Bracket)

A variety of imported or Accel starter solenoids. Fit all Sportster

models from 67-80 and Big Twins from 65-88 (with solenoid

mounted parallel to primary cover) including all 4-speed models

and all Softail models.

Accel Starter Solenoids

25003 Plain (repl. OEM 71469-65TB)

668377 Black (repl. OEM 71469-65B)

26430 Chrome (repl. OEM 71470-86T)

APPAREL

25046

668378

Starter Solenoids for 5-Speed Models (Dual

Bracket)

Accel starter solenoids for all 5-speed Big Twin models from 80-

88 (except Softail models).

Accel Starter Solenoids

25045 Plain (repl. OEM 31489-79TB)

668378 Black (repl. OEM 31489-79B)

25046 Chrome (repl. OEM 31511-90T)

Solenoid Mounting Kit

Fits Big Twin models from 65-88 and Sportster models from 67-80

with 2 hole mounting tab. Includes mounting spacer bolts and

lock washers.

050419 Replaces OEM 31452-65

Solenoid Inner Boot

Rubber solenoid inner boot for all 65-88 Big Twins and 67-80

Sportster models. Sold each.

25033 Replaces OEM 31441-65A

Fail-safe Pushbutton for Terry Components

Starters

Fail-Safe Switch. Use as a "backup" system or as a custom starter

button. Mounts on the end of the solenoid and installs in

minutes. For Terry Components 1.2 and 1.4 KW starters.

640687 Chrome Fail Safe Switch

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

Spyke Solenoid Repair Kit

Includes plunger assembly and contacts. Fits Big Twins from 89-

06.


640909 640910

Solenoid Cover Starter Button Switches

Can be used as a “back up” system or as a custom starter button

without the need for a starter switch on your handlebars. It

bypasses the stock relay, permitting starter activation at the push

of a hidden button. Fits stock bikes and customs using late style

1.2kw, and 1.4kw output type starters.

640909 Chrome

640910 Black wrinkle finish

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Starter Solenoid Repair Kit

Repair kit for the electric starter solenoids on all models from

65-88 (except 81-88 Sportster models).


Chrome Solenoid Cover

No adjustment needed to mount this triple chrome-plated cover.

It slides over the solenoid and mounts with existing bolts to the

primary case. Fits all 4-speed Big Twins from 65-86 and all Softail

models from 84-88.


WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

Starter Solenoid Connector & Terminal

893291 1-Position locking connector. Pack of 5 (OEM 72295-94)

Rubber Solenoid Cover

Rubber solenoid cover for Big Twin models.

25025 Replaces OEMs 31444-65A, 31475-77

SHEETMETAL

INSTRUMENTS

& GAUGES


Clean-up the looks of your bike with this chrome cover for the

starter solenoid.

25036 Fits all models from 89-06


Fits the solenoid boot on Softail and 4-speed FL/FX models from

65-88.

25040 Includes a new solenoid boot


LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.87

EDITION 50

6

683450

683449

Pullstart Lever for 65-88 Big

Twins by CPV

The coolest way ever to start your shovel.

Turn the ignition on and pull the beefy

lever! Relay sold seperately.

Chrome Horn Covers

Set it off in style and add a custom touch

to your bike with these creative horn

cover kits. Available in 4 designs: Iron

Cross, Flames, Skull, and Flaming Skull.

Each one includes a new, black mini horn,

and fits most models with vertical motor

mount horn from 91-13. Sold each.

609991 Flames

Note: Requires horn bracket (OEM 69120-91)

Wolo Bad Boy Air Horn Cover

• One-piece design requires no hoses

• Heavy-duty, maintenance-free

compressor provides years of

dependable service

• Kuryakyn-designed bracket and plug-&-

play wiring harness mounts the Bad Boy

in stock H-D horn location without any

fabrication


Cover for Wolo Bad Boy Air Horn ,

Color: Chrome , Unit: Each , Qty.: 1

683449 Raw finish

683450 Black Anodized

893978

Chrome Starter End Cover

A simple-to-install chrome starter motor

end cover kit for all Sportster models

from 67-80 and Big Twins with Hitachi or

Prestolite starters from 65-88.

28606 Chrome starter motor end cover

(repl. OEM 31565-67)

Custom Horn Cover for

Sportster Models

Cover snaps over stock horn on XLH 883

models from 86-93 and XR 1000 models

from 83-84. Replaces OEM 39038-88T

350109 Horn cover

Super Deluxe Wolo Bad

Boy Air Horn

• Plug-&-play installation

• 118 decibel -530/680Hz Dual-Tone Air

Horn

• Note: Require 2“ clearance rear of

mount for horn clearance from shift/

brake pedal!

Fitment: 92-20 Sportster, 92-17 Dyna,

92-17 Softail, 92-16 Touring , Fitment

Note: With Stock Cowbell Horn ,

Color: Chrome , Unit: Kit , Qty.: 1

893979

PART#

DESCRIPTION

777742 Deluxe Wolo Bad Boy Horn Kit

777743 Super Deluxe Wolo Bad Boy

Horn Kit

Horn Cover

893978 The Vilain (incl. horn), for Touring

02-16

893979 Stealth (incl. horn), for Touring 02-16

Mini Horn

Small zink-plated two terminal horn packs

a powerful sound and measures 2 1/2" in

diameter.

19891 Mini horn

6.88

APPAREL

SEATS &

TOURING

28151

28152

28150

Horn Covers

Chrome-plated replacement horn covers.

Universal Horn with Cover

This 12-volt horn features a universal

mounting bracket and a removable

chrome-plated, injection-molded cover.

Can be used in custom applications and

has spade-type terminals.

31506 Universal horn

FOOT

CONTROLS

HAND

CONTROLS

Fits low note horns on Sportster models

76-85, and FX models from 76-80.


LIGHTING

Fits high note horns on Big Twins from

late 76-90, and 76-85 Sportster

models


ELECTRICAL

Fits Sportster models from 86-92 and

Softail or FLT models from 91-92.

28153 Replaces OEM 69012-86A (not

shown)

Fits Sportster models from 93-94 and

Softail or FLT models from 93-03.

28154 Replaces OEM 69012-93 (not

shown)

Tear Drop Horn Cover Kits by

Paughco

If you like Paughco’s Tear Drop air

cleaners then you might get your kicks

out of these matching horn covers.

Available in vertical or horizontal mount

versions. Mini chrome horn included.

651298 Ribbed horn kit, horizontal

Deluxe Chrome Horn with

Adjustable Mount

Two terminal horn comes equipped with a

universal adjustable mounting bracket.

19892 Chrome horn

EXHAUST

INTAKE

ENGINE

651299 Ribbed horn kit, vertical

651300 Smooth horn kit, horizontal

GASKETS

Electric Horn

Early-style 12-volt electric horn with

chrome grill. This heavy-duty, top-quality

horn has a universal mount and can be

used in many applications.

TRANNY &

CLUTCH

28120 Horn and grill

DRIVELINE

775731 775730 629670

Skull Horn Covers

• Durable, lightweight injection-molded ABS construction

• Installs over the existing horn cover using high-strength adhesive

• Available in chrome, black chrome or gloss black finishes

Fitment: 91-94 FX Model, 91-17 Dyna, 91-17 Softail, 91-24 Touring, 09-24

Trike, 90-02 XLH1200, 96-20 XL1200C, 12-16 XL1200V, 13 XL1200C ANV, 13-

16 XL1200CA, 13-17 XL1200CB, 14-18 XL1200T, 20 XL 1200T , Fitment Note:

For cowbell horn or waterfall horn cover , Unit: Each , Qty.: 1

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

PART#

COLOR

775731 Gloss Black

775730 Chrome

629670 Dark Chrome

Mach 2 Horn Cover

Fitment: 91-94 FX Model, 91-17 Dyna,

91-17 Softail, 91-24 Touring, 09-24

Trike, 90-02 XLH1200, 96-20 XL1200C,

12-16 XL1200V, 13 XL1200C ANV, 13-

16 XL1200CA, 13-17 XL1200CB, 14-18

XL1200T, 20 XL 1200T , Fitment Note:

For cowbell horn or waterfall horn

cover , Unit: Each , Qty.: 1

PART# COLOR DESCRIPTION

777296 Black, Chrome With black mesh

777297 Black, Chrome With chrome mesh

777295 Chrome With chrome mesh

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.89

EDITION 50

6

Horn Kit

• High performance horn kit

• CNC machined from forged billet aluminum

• Features a horn capable of 110 dB to make sure you are heard

on the road

• Stainless steel mesh insert

Unit: Kit , Qty.: 1

FITMENT

Ness Horn Covers

• These round horn covers accept any 5 hole point cover to

match the theme of your bike. Choose Ness, HD or your

favorite aftermarket design

• Steel construction cover is finished in chrome or black powder

coated finish

• Replaces the factory “cowbell” shaped horn cover on 91-19 Big

Twin and XL models

Note: Point cover sold seperately.

654039 Ness horn cover chrome

654040 Ness horn cover black

Note: With stock cowbell cover.

BLACK BLACK CUT CHROME

07-20 Sportster 930142 930143

91-94 FX Model, 91-17 Dyna,


09-24 Trike

930144 930141

10-Gauge Key Switch Cover

• Billet Aluminum

• Mounts directly over factory ignition switch

• 10-Gauge style

PART# FITMENT COLOR FINISH

990192 15-23 Indian Scout Chrome

Arlen Ness Beveled Horn Kits

• Beveled styling with a chrome finish

• Our new horn assemblies feature a high performance horn

and forged billet aluminum construction

• The high performance horn is capable of 110 dB

• A stainless steel mesh insert is installed into each housing for

style and additional horn protection

• These horns are a perfect match to our Inverted Series Air

Cleaners

550165 For Twin Cam models 91-20, black

550166 For Sportster models 07-20, chrome

550167 For Sportster models 07-20, black

550168 Universal fitment, chrome

550169 Universal fitment, black

6.90

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.91

EDITION 50

370320

6

6.92

Mega Battery Cables with 12”

Auxiliary Wire

All Terry Components cables have 18k

gold plating and tined copper 1666

strand Mega Cable. The auxiliary wire is

12 gauge tined copper 259 strand Mega

Cable.

Positive

These positive battery cables with

auxiliary wire eliminates stacking cables

on the battery and are perfect for custom

wiring direct to the terminal block,

regulator or any accessory.

647532 Positive 6" (w/12" auxiliary wire)

Battery Cable

647533 Positive 8" (w/12" auxiliary wire)

Battery Cable

647534 Positive 10" (w/12" auxiliary

wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable

Negative

These negative battery cables with

auxiliary wire are perfect for a custom

bike ultra ground and eliminate poor

electrical ground connections. Install the

4 gauge cable to the transmission and the

12 gauge wire to any electrical accessory

for an ultra ground.

647539 Negative 6" (w/12" auxiliary

wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable


wire) Battery Cable

All Balls ‘Ultra Flex’ Battery

Cables

• Increase starter performance by

supplying maximum battery current to

the starter motor

• 4-gauge cable manufactured with pure

electrolytic grade, 36-gauge tinned

copper strands for maximum current

transfer and flexibility

• Specially rated 125° C, oil and gas

resistant, ultra flexible translucent

jacket guarantees excellent

performance

• Sold each

370320 10"-long

370321 12"-long

370322 14"-long

370323 16"-long

370324 25"-long

Battery Cables

• Pro-Flex battery cable

• 4-gauge made

• 1/4” and 5/16” heavy duty battery lugs

BLACK

LENGTH

893312 6”

893313 7”

893314 9”

893315 11”

893316 13”

893317 15”

893318 17”

893319 19”

893312

893320

CLEAR

LENGTH

893320 6”

893321 7”

893322 9”

893323 11”

893324 13”

893325 15”

893326 17”

893327 19”

mo.unit Battery Cable with 40A Fuse

The mo.unit battery cable with fuse is the possible connection cable between each

mo.unit and the vehicle battery. It has an integrated main fuse with 40 A maximum

current load.

This high quality copper cable has high conductivity and comes with an integrated fuse

holder, 2 fuse, 2 cable eyelets for crimping and 2 pieces of heat shrink tubing. One cable

eyelet and heat shrink tubing are already pre-assembled

The total length is 160 cm.

• 1 x connection cable with approx. 8.4

qmm cross-section (AWG 8) and 26 cm

length.

• 1 x integrated fuse holder.

Part#: 920005 , Length: 260 mm, Unit: Each , Qty.: 1

• 2 x fuse 40 A.

• 2 x cable eye.

• 2 x heat shrink tubing.

Bulk Battery Cable Dealer Kit

• Pro-Flex battery cable

• 4-gauge made

• Include 1/4” and 5/16” heavy duty

battery lugs

893309 Bulk battery cable dealer kit

893310

Battery Lugs

• Pack of 5

893310 1/4” Battery lugs

893311 5/16” Battery lugs

893311

Rubber Battery Straps

Duplicates of the Original Equipment

parts. Sold each.

25032 Fits 5-speed Touring models from

80-92, Softail models from 84-93,

and 77-79 Sportster and XLCR

models (repl. OEM 66105-77)

300157 Rear strap for 93-10 Softail models

(repl. OEM 66111-93)

300158 Front strap for 93-10 Softail models

(repl. OEM 66109-93)

301151 Battery strap for 70-84 FLH models

mo.unit Battery Cable without

Fuse

The mo.unit battery cable without fuse

is the possible connection cable between

each mo.unit and the vehicle battery. It

does NOT have an integrated main fuse.

This high quality copper cable has high

conductivity and comes with 2 cable lugs

for crimping and 2 pieces of heat shrink

tubing. One cable eyelet and heat shrink

tubing is already pre-assembled

The total length is 60 cm.

Part#: 920007 , Length: 60 mm, Unit:

Each , Qty.: 1

APPAREL

921781 921776

921782

SEATS &

TOURING

FOOT

CONTROLS

921773

921777

921774

921780

921772

921775

921771

921778

921779

Battery Cable Kit

• Cables will increase starter performance by reducing voltage

losses from undersized cables

• Cables are manufactured with pure electrolytic grade,

36-gauge copper wire strands

• The 7 over 7 bundling of the copper strands maximizes current

flow and the flexibility of the cable

• The outer jacket material is rated for 257 °F (125 °C) and is oil

and gas resistant

Color: Black , Unit: Kit , Qty.: 1

PART#

FITMENT

921771 84-88 Softail

921772 89-08 Softail

921773 85-88 FX Model, 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84

FXRSDG

921774 89-94 FX Model

Mega Battery Cables

The lugs are twice the thickness of standard lugs and are made

from 99% pure electroplated copper, then 24k gold-plated to

provide a positive connection with greater conductivity. Kits

contain the lengths needed for specific applications.

Mega Cable Kits

647549 Fits Softail models from 08-17. Includes a 6” ground cable

and a 10” battery-to-starter cable, except 13-17 FXSB/S/SE

47521 Fits Softail models from 89-07. Includes a 10" ground

cable and a 12" battery-to-starter cable

47520 Fits Softail models from 84-88. Includes an 8" ground

cable, a 17" battery-to-solenoid cable, and a 15" solenoid-to-starter

cable

47522 Fits 4-speed FL models from 65-79. Includes a 9" ground

cable, a 16" battery-to-solenoid cable and a 16" solenoid-to-starter

cable

647546 Fits 07 Touring models. Includes a 17" ground cable with

an 8" auxiliary wire, and a 13" battery-to-ground wire.

647547 Fits 08 Touring models. Includes a 14" ground cable with

a 1/4" bent, 45 degree lug and a 9" auxiliary wire, and a

10" battery-to-starter cable with a 1/4" bent, 45 degree

lug.

647548 Fits Touring models from 09-13. Includes a 13" ground

cable with a 1/4" bent, 45 degree lug and a 5" auxiliary

wire. The positive cable is a 9" with a 1/4" bent, 45

degree lug and a 5" auxiliary wire.

647550 Fits Dyna models from 06-17. Includes 9”, 12” and 14”

cables

647551 Fits Sportster models from 04-13. Includes 12” and 13”

cables

Individual Mega Cables

Black insulation with copper lugs.

47530 7”

47533 13”

47531 9”

47532 11”

47534 15”

47535 17”

47536 25”

47537 32”

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

921775 91-03 Dyna

921776 66-79 FL Shovel

921777 80-84 FL Shovel, 85-88 Touring

921778 89-92 Touring

921779 93-08 Touring



921782 04-09 Dyna

Yuasa Jumper Cables

• Heavy duty, 8 foot, 8-gauge cables will not stiffen or freeze

• Tangle-resistant, encased rubber grips for safer use

2831656 Jumper cables

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.93

EDITION 50

6

RevTech Power AGM

The RevTech Power AGM battery is identical in construction to

the OEM-Battery and thus offers OEM-quality Made in the USA.

The AGM design allows easy installation without the worry of

acid spills and damage to equipment. Completely spillproof and

leakproof. The absorbed glassmat (AGM) technology increases

power while improving rider and environmental safety. Molded

top and side connection terminals provide versatility, increased

strength and durability.

• WORRY FREE...

• No vent tube

• No acid leaks to cause terminal corrosion

• Withstands damaging effects of vibration

• Environmentally friendly, 100% recyclable

• MAINTENANCE FREE...

• No filling

• No activation

• Eliminates low water levels

• Low discharge rates for off season storage

MOTOBATT Quadflex AGM

• Reduce your battery inventory by nearly 85%

• 2 x Minus and 2 x Plus Connectors

• Quit messing around with electrolyte

• MotoBatt is an AGM battery, a type of sealed lead acid

battery!

• Get all the benefits of a GEL battery at a sensible price

Unibat Batteries

Unibat have been producing high performance batteries for cars, motorcycles and heavy duty vehicles for over fifteen years and is

a leader in its field across European markets. All the shown batteries are maintenance free AGM batteries , and gives out optimum

cranking power. This type of battery can be safely installed in almost any position, because the acid is kept by individual separators

made of special absorbed glass material (AGM). These separators keep the acid and electric contacts between the elements.

Unibat CX Heavy Duty AGM

• 30% more power than classic AGM batteries

• Reinforced and more robust design

• Completely filled and sealed

• Leak proof and completely maintenance free

• Reinforced housing and connection contacts

• Particularly resistant to vibrations and shocks

• AGM technology with glass fiber fleece (similar to gel

technology)

• More charge cycles than conventional acid batteries

• Battery installation possible in every position

• Vibrations resistant

Unibat Maintenance Free AGM

• Dry Battery with Acid Pack

• Maintenance free (MF)

• AGM

• Acid pack included

• Superior starting power

• More discharge cycles with respect to conventional batteries

• It can be installed in any position, with no risk of acid leaks

• Available for the majority of applications

• Totally hermetic

• It doesn’t need refill

Important Notice: According to Regulation (EU) 2019/1148,

battery acid may NOT be provided or sold to end customers.

intAct Bike Power Gel Battery

The heavy-duty bundle of energy copes well with the strongest road shocks and engine vibrations from

Harleys or other large-displacement bikes and also starts two-wheelers with a high demand for electrical

energy (e.g. with ABS).

• Perfect for Harleys and other high displacement 2-cylinder engines

• Highest cold currents

• For two-wheelers with high energy requirements, e.g. ABS safety technology

• Extremely vibration resistant, plate packs compressed and accurately fitted in the battery box

• Robust housing made of impact-resistant plastic for heavy mechanical stresses

• Leak-proof, can be installed at any angle, electrolyte bound as gel

• Absolutely maintenance-free

Important Notice on battery disposal: The following notice is addressed to those who use batteries or products with built-in batteries and no longer resell them in the form

in which they were delivered to them (end users): You are legally obligated to return used batteries as an end user. You can return used batteries, which we carry or have

carried as new batteries in our product range, free of charge at our shipping warehouse. The symbols shown on the batteries have the following meaning: The symbol of the

crossed-out garbage can means that the battery must not be placed in the household garbage.

Pb = Battery contains more than 0.004% lead by mass | Cd = battery contains more than 0.002 mass percent of cadmium | Cadmium Hg = battery contains more than

0.0005 mass percent mercury

6.94

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

Yuasa Maintenance Free High Performance AGM Wet Charged Factory Activated Battery

If high power is top priority in a replacement battery, look to Yuasa‘s High Performance Maintenance Free batteries. Yuasa means

more power, less maintenance and longer life.

• Factory Activated

• Spill-proof design means virtually no possibility of leaks

• Advanced lead-calcium technology pumps up starting power

• Sulphation retardant dramatically reduces battery-killing plate sulphation

• Long lasting which means Yuasa‘s High Performance Maintenance Free batteries will last up to three times longer than

conventional batteries

• Exceptional resistance to vibration makes Yuasa the most reliable battery on the market today

• And, VRLA batteries hold voltage longer and need less charging in standby or storage mode

• Plus Increased Power

• Up to 30% more cranking amps thanks to a radial grid design and additional plates

Yuasa Maintenance Free AGM Wet Charged Factory Activated Battery

VRLA (Valve Regulated Lead Acid) means a battery that‘s perfect for people who have better things to do than battery maintenance!

Our permanently sealed VRLA battery never needs refilling; however, it still needs periodic charging. Ideal for motorcycles, scooters,

ATVs, riding mowers and personal watercraft.

• Factory Activated








Yuasa Maintenance Free AGM High Performance (with Acid Pack)









• Plus Increased Power

• Up to 30% more cranking amps thanks to a radial grid design and additional plates



Yuasa Maintenance Free AGM (with Acid Pack)

VRLA (Valve Regulated Lead Acid) means a battery that‘s perfect for people who have better things to do than battery

maintenance! Our permanently sealed VRLA battery never needs refilling; however, it still needs periodic charging.


• pill-proof design means virtually no possibility of leaks









Yuasa Conventional Battery

The Conventional 12 Volt battery is the industry standard for motorcycles, snowmobiles and ride-on mowers.

• Specifically designed to protect against seepage and corrosion

• Made to withstand vibration

• Patented separators providing high cranking power

• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS








TOOLS &

EQUIPMENT

6.95

EDITION 50

6

FAMILY FITMENT POWER

AGM,

GREY

Softail 91-24 Softail 685336



Dyna 91-96 Dyna 685336

Dyna 97-17 Dyna 685335

Touring

Touring

97-24

Touring

85-96

Touring

REVTECH MOTOBATT UNIBAT YUASA INTACT

685337

Trike 09-24 Trike 685337

Sportster

Sportster

Sportster

Sportster

Sportster

Sportster

RH

Pan

America

04-20

Sportster

97-03

Sportster

79-96

Sportster

70-78

Sportster

(Kickstart)

67-78

Sportster

(E-Start)

21-24

Sportster

S, 22-24

Nightster

RH975

21-23 Pan

America

656128

685336

QUADFLEX

AGM

619277

(Yellow),

619278

(Black)

619277

(Yellow),

619278

(Black)

619277

(Yellow),

619278

(Black)

619277

(Yellow),

619278

(Black)

619277

(Yellow),

619278

(Black)

619305

(Yellow),

888214

(Black)

619305

(Yellow),

888214

(Black)

656129

(Yellow),

911424

(Black)

619277

(Yellow),

619278

(Black)

CX

HEAVY

DUTY

AGM,

BLACK

MAINTENANCE

FREE AGM

(DRY WITH

ACID PACK),

BLACK

911760 618428

911759

911758 618427

911760 618428

911759

FACTORY

ACTIVATED

MAINTENANCE

FREE AGM,

BLACK

2831686,

2831685 (High

Performance)

2831686,

2831685 (High

Performance)

MAINTENANCE

FREE AGM

(DRY WITH

ACID PACK),

BLACK

2831560,

2831668 (High

Performance)

2831565,

2831667 (High

Performance)

2831560,

2831668 (High

Performance)

CONVEN-

TIONAL

DRY

LEAD

ACID

BIKE

POWER

GEL,

BLACK

919316

919316

911761 618430 2831647 2831687 919317

2831669 (High

Performance)

919319

911761 618430 2831647 2831687 919317

911757 618426 2831682 919318

911760 618428

685334 911758 618427

656128

656128

Street XG 15-20 Street 656128

656129

(Yellow)

656129

(Yellow)

656129

(Yellow)

2831686,

2831685 (High

Performance)

2831668 (High

Performance),

2831560

2831565,

2831667 (High

Performance)

2831179

(White)

2831443

(Black)

919316

911757 618426 2831682 919318

911757 618426 2831682 919318

911757 618426 2831682 919318







6.96

APPAREL

SEATS &

TOURING

FAMILY FITMENT POWER

AGM,

GREY

V-Rod 07-17 V-Rod 685336

V-Rod

FX Model

FL Shovel

FL Shovel

02-06 V-Rod,

07 VRSCR

85-94 FX

Model

80-84 FLT,

81-84 FLTC

66-84 FL

Shovel

REVTECH MOTOBATT UNIBAT YUASA INTACT

QUADFLEX

AGM

619277

(Yellow),

619278

(Black)

CX

HEAVY

DUTY

AGM,

BLACK

MAINTENANCE

FREE AGM

(DRY WITH

ACID PACK),

BLACK

911760 618428

685624 911756 618425

685334 911758 618427

FACTORY

ACTIVATED

MAINTENANCE

FREE AGM,

BLACK

2831686,

2831685 (High

Performance)

2831684 (High

Performance)

MAINTENANCE

FREE AGM

(DRY WITH

ACID PACK),

BLACK

2831560,

2831668 (High

Performance)

CONVEN-

TIONAL

DRY

LEAD

ACID

BIKE

POWER

GEL,

BLACK

919316

2831489 919320

2831565,

2831667 (High

Performance)

2831669 (High

Performance)

2831443

(Black)

919319

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

FX Shovel

FX Shovel

Panhead

Indian

Bagger

Indian

Touring

Indian

Cruiser

Indian

Cruiser

Indian

Scout

Indian

FTR

Buell

1125

71-84 FX

Shovel

71-72 FX

Shovel

(Kickstart)

65 Panhead

15-24 Indian

Bagger

15-24 Indian

Touring

14-24 Indian

Cruiser

12-13 Indian

Cruiser

685334 911758 618427

685336 911760 618428

685336 911760 618428

685336 911760 618428

2831565,

2831667 (High

Performance)

2831560,

2831668 (High

Performance)

2831560,

2831668 (High

Performance)

2831560,

2831668 (High

Performance)

2831669 (High

Performance)

15-24 Scout 923845 923842

19-24 Indian

FTR

685624

09-10 1125 656128

Buell XB 03-10 XB 685624

Buell X1 99-02 X1 685336

Buell M2 97-02 M2 685336

911424

(Black)

656129

(Yellow)

911424

(Black)

619277

(Yellow),

619278

(Black)

619277

(Yellow),

619278

(Black)

2831179

(White)

2831443

(Black)

919316

919316

919316

919319

911756 618425 2831684 923843 919320

911757 618426 2831682 919318

911756 618425 2831684 2831489 919320

911760 618428

911760 618428

Buell S1 97-98 S1 618427

Buell S3 97-99 S3 685336

619277

(Yellow),

619278

(Black)

911760 618428

2831686,

2831685 (High

Performance)

2831686,

2831685 (High

Performance)

2831686,

2831685 (High

Performance)

2831560,

2831668 (High

Performance)

2831560,

2831668 (High

Performance)

2831565,

2831667 (High

Performance)

2831560,

2831668 (High

Performance)

919316

919316

919316

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS








TOOLS &

EQUIPMENT

6.97

EDITION 50

PART# BATTERY TYPE OEM # COLD

CRANKING

AMPS

RevTech Power AGM

685334 YB16-B-CX

65991-82,

65991-75

WIDTH X DEPTH

X HEIGHT

325 174 x 100 x 155

685335 YB16HL-A-CX 65989-90 325 175 x 100 x 155

CONFIGURATION

685337 YIX30L 66010-97 400 165 x 128 x 178

685624 YTX14-BS 65948-00 220 147 x 85 x 143

656128 YTX14-LBS 65958-04 220 147 x 84 x 145

685336 YTX20L-BS 65989-97 310 178 x 88 x 155

MOTOBATT QUADFLEX AGM

6

619278

YTX20BS,

YTX20LBS

65989-97,

65991-75,

65991-82,

65989-90

310 173 x 86 x 156

888214 YIX30L 66010-97 390 164 x 126 x 177

911424 YTX14BS 65948-00 200 130 x 87 x 151

619277

YTX20BS,

YTX20LBS

65989-97,

65991-75,

65991-82,

65989-90

310 174 x 86 x 154

656129 YTX14-LBS 65958-04 240 150 x 89 x 146

619305 YIX30L 66010-97 390 166 x 125 x 176

UNIBAT CX HEAVY DUTY AGM

911757 GYZ16HL 65958-04 275 147 x 86 x 145

911761 GYZ32HL 66010-97 510 167 x 127 x 177

923845 YTX14AH-BS 4014770 245 134 x 89 x 164

911756 YTX14-BS 65948-00 275 147 x 83 x 147

911758 YTX20H-BS

65991-82,

65991-75

435 172 x 98 x 158

911760 YTX20HL-BS 65989-97 385 173 x 87 x 155

911759 YTX20L-BS 65989-90 435 172 x 97 x 160

UNIBAT MAINTENANCE FREE AGM (DRY WITH ACID PACK)

618430 YIX30L 66010-97 385 164 x 124 x 175

618425 YTX14-BS 65948-00 200 148 x 84 x 144

618426 YTX14L-BS 65958-04 200 148 x 87 x 144

618428 YTX20L-BS 65989-97 270 173 x 87 x 155

618427 YTX20L-BS

INTACT BIKE POWER GEL

65991-82,

65991-75

270 173 x 87 x 155

919317 YIX30L-BS 66010-97 445 166 x 130 x 175

919320 YTX14-BS 65948-00 255 149 x 87 x 144

919318 YTX14L-BS 65958-04 255 149 x 87 x 144

919316 YTX20L-BS 65989-97 350 176 x 87 x 154

919319 YTX24HL-BS 66010-82 410 205 x 87 x 162

YUASA MAINTENANCE FREE AGM (FACTORY ACTIVATED)

2831647 YIX30L 66010-97 400 166 x 129 x 178

2831684 YTX14H 65948-00 240 149 x 89 x 145

2831685 YTX20HL 65989-97 310 175 x 87 x 155

2831686 YTX20L 65989-97 270 175 x 87 x 155







6.98

PART# BATTERY TYPE OEM # COLD

CRANKING

AMPS

YUASA MAINTENANCE FREE AGM (DRY WITH ACID PACK)

WIDTH X DEPTH

X HEIGHT

2831687 YIX30L-BS 66010-97 400 166 x 129 x 178

923842 YTX14AH-BS 4014770 210 134 x 89 x 166

2831489 YTX14-BS 65948-00 200 149 x 89 x 145

923843 YTX14H-BS 4017581 240 150 x 87 x 145

2831682 YTX14L-BS 65958-04 200 151 x 89 x 146

2831565 YTX20-BS

2831667 YTX20H-BS

65991-82,

65991-75

65991-82,

65991-75

270 175 x 85 x 155

310 175 x 87 x 157

2831668 YTX20HL-BS 65989-97 310 175 x 88 x 156

2831560 YTX20L-BS 65989-97 270 175 x 85 x 155

2831669 YTX24HL-BS 66010-82 350 206 x 87 x 163

YUASA CONVENTIONAL LEAD ACID

2831443 YHD-12 66007-84 200 242 x 130 x 164

2831179 12N7-4A 66006-70 74 134 x 75 x 136

CONFIGURATION

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

‘Riveted’ Battery Covers

Chrome-plated covers with extra nonfunctional

buttonhead rivets for that

high-tech “racers only” look. These covers

complement our complete line of other

‘Riveted’ covers.

688077

TRANNY &

CLUTCH

37258 Fits 4-speed FX models with

electric start from 73-86 (except

Softail models) and all Sportster

models from 82-03

DRIVELINE

26375

WHEELS, TIRES

& BRAKES

26376

12296

91297

FRAMES

26019

Battery Covers for 4-Speed FL

Models

Show-chrome battery covers. Fit 4-speed

FL models from 70-84. Available in two

styles, choose the one which suits your

taste.

26019 Plain

26376 Louvered

Battery Covers for Sportster

and FX Models with Electric

Start

Complete with cell viewing window. Fit all

FX 4-speed electric start models from 73-86

(except Softail models) and all Sportster

models from 82-03.

12296 Chrome plain battery cover

688077 Black plain battery cover

26375 Chrome louvered battery cover

26506 24K gold wing emblem

Battery Cover and Tray Kits

Available in two different configurations.

We offer kits with covers only which

include the side and top covers including

the hold down strap, or with both covers,

the strap and the tray.

Kit With Cover

91298 Fits 73-86 4-speed FX models

(except FX Softail models)

Kit With Cover and Tray

91297 Fits 73-86 4-speed FX models

(except FX Softail models)

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS








TOOLS &

EQUIPMENT

6.99

EDITION 50

15204

12269

6

Stainless Steel Battery Hold-

Down Straps

18-gauge stainless steel with stainless eye

bolts and nuts.

25029 Fits FL models from 70-84 (repl.

OEM 66383-70T)

25028 Fits electric start Sportster models

from 67-78 (repl. OEM 66470-67)

25030 Fits FX and Sportster models with

kickstart only from 70-78 (repl.

OEM 66470-70T)

25031 Fits electric start 4-speed FX models

(except Softail models) from

73-86 and all Sportster models

from 82-97 (repl. OEM 66476-

73T)


(repl. OEM 66476-98)

Battery Cushions

High-quality pure neoprene closed-cell

foam rubber. Includes a 4" x 6 1/2" pad

for the battery tray, and two 2" x 1"

pads for the top cover.

Includes a 5 3/16" x 8" pad for the battery

tray, and three 2" x 1" pads for the top

cover.


(repl. OEM 66210-85B)


12268

Oil Tank, Battery and Fender

Accessories

12265 Tall 6-volt hold-down rods (repl.

OEMs 66390-58, 66393-58)

12269 Battery top plate (repl. OEM

66373-54TA)

12268 Battery bottom plate (repl. OEM

62575-36)

15204 Battery plate bracket (repl. OEM

62585-36)

26085

26088

26086

Chrome Battery Top Covers

26085 Fits 4-speed FL models from 65-84

CHROME




from 82-96 CHROME




from 82-96 BLACK

26088 Fits electric start Sportster models

from 67-78 CHROME26085

Chrome Battery Carrier Trays

Replacement chrome battery carriers

Include battery pad, rubber mounting

studs, brackets and all required mounting

hardware.

26479 Fits electric start FX models from

73-78 (repl. OEM 66191-73)

6.100

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

YCX1.5 Smart Battery Charger

• Fully automated 7-step charge and maintenance process refined by GS Yuasa engineers for unrivaled battery care

• Charges batteries faster than comparable models thanks to higher performance

• Engineered with GS Yuasa‘s world-leading battery manufacturing expertise to extend life, maintain performance and ensure

ultimate reliability

• Optimum charging performance for conventional lead-acid, AGM, lithium and gel batteries

• Charge and charge retention for motorcycle and powersport batteries (6 V and 12 V). charging from 2Ah to 30Ah; Trickle charge

up to 120 Ah

• Automatic battery diagnosis with patented rejuvenation phase to stop the sulphation process

• Detection and reporting of all charging errors caused by battery problems

• Automatic trickle charge with energy-saving eco mode maintains the optimal state of charge during storage of the battery

• Rugged, integral clamp and spade terminals attach permanently for plug-and-play connection

• Compact format with interchangeable sockets for use in Europe, UK and USA

• Enhanced safety features with short circuit, overcharge and reverse polarity protection provide ultimate reliability

• Easy to use thanks to simple navigation buttons and meaningful indicator LEDs

Part#: 924932 , Field of Application: For all AGM, Sealed Maintenance Free, GEL, Lithium and Lead Acid Batteries ,

Color: Black , Unit: Each , Qty.: 1

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

YCX6 Smart Battery Charger

• The fully automatic nine-stage charging and charge retention process, refined by GS Yuasa engineers, ensures maximum battery

protection

• Engineered with GS Yuasa‘s world-leading battery manufacturing expertise to extend life, maintain performance and ensure

ultimate reliability

• Charger designed for commercial use, popular and tried and tested by workshops and technicians

• Active cooling ensures stable power delivery and extends the life of the charger

• Self-activating float mode maintains optimal state of charge during battery storage

• Faster charging thanks to higher output power than comparable models

• Optimum charging performance for conventional lead-acid, start-stop, EFB, AGM, lithium and gel batteries

• Charging and charge retention of 12V batteries (even from the fully discharged state). Charging up to 120 Ah and trickle charging

up to 180 Ah

• Automatic battery diagnosis with patented rejuvenation phase to stop the sulphation process

• Detection and reporting of all charging errors caused by battery problems

• One charger for multiple uses: thanks to the adjustable output power, an unrivaled range of battery capacities is covered

• Automatic trickle charge with energy-saving eco mode maintains the optimal state of charge during storage of the battery

• Enhanced safety features with short circuit, overcharge and reverse polarity protection provide ultimate reliability

• Durable, splash-proof (IP44) construction with robust, integrated clamp and spade terminals

• Easy to use thanks to simple navigation buttons and meaningful indicator LEDs

Part#: 924933 , Field of Application: For all AGM, Sealed Maintenance Free, GEL, Lithium and Lead Acid Batteries ,


DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.101

EDITION 50

6

Pro-4 Duo 12V 5A Automatic

Diagnostic Battery Charger x 4

OptiMate Pro-4 Duo is the automatic

diagnostic charger for 4 x 12V Pb lead-acid

(STD, AGM, GEL) and/or 12.8V LFP lithium

(LiFePO4 / Lithium Ferrous Phosphate)

batteries. The 4 bank battery charger can

independently charge, test and maintain 4

x 12V lead-acid and 12.8V / 13.2V lithium

LFP batteries. Four fully independent

5 Amp charging stations / banks, each

with 3 selectable modes to service new

and used batteries – activate 4 x new,

or save and/or charge and test 4x used

batteries. Automatically save any type

of deep discharged battery from as low

as 0.5 Volts, additionally for LFP lithium,

manually reset the protective BMS and

save from zero volts – dead-flat, neglected

batteries can be recovered. State of

health test for good (80 to 100%), ok (60

– 80%) or bad (below 60%) batteries –

confirms if battery is serviceable or should

be replaced. Designed for the global

professional, including battery service,

new powersport vehicle and/or new

battery sales – service orientated product

designed for continuous use. Each bank

delivered with a replaceable output cord

and fused battery clip set, AC power cord

is replaceable / exchangeable.

• For 12V lead-acid (STD/AGM/GEL),

12.8V/13.2V LiFePO4, Pb/LFP batteries

• 0.2A to 5A variable charging amps

(Ampmatic)

• 0.5V to 14.4V charging volts @ 12V

lead-acid mode

• 11.4V to 14.4V charging volts @

12.8V/13.2V Lithium LFP mode

• 0.5V to 14.4V charging volts @ 60‘ mode

• Class II AC cord suitable for region,

180cm charge lead extender, fused

battery clips included

• Global (100-240V 50-60Hz)

• AC Class 2 input socket, with ON/OFF

switch, 15cm output cord

• IP40 indoor rating

• 3 selectable opereation modes:

• Pb: for 12V lead-acid (STD / AGM / GEL)

batteries

• LFP: for 12.8V / 13.2V LiFePO4 batteries

• 60‘: A shortened program with charge

time limited to 60 minutes , suitable

for first charge / activation of a new

battery, or a quick recharge of a healthy

used battery with voltage higher than

11.4V.

• Note: If no selection (Pb or LFP) is

made prior to connecting a battery

for charge, the 60‘ mode becomes the

default selection.


12V batteries including lead-acid (Pb)

- STD (with filler caps), AGM & GEL

(sealed VRLA) and Li-Ion made with

LiFePO4 / LFP technology , Unit: Each

, Qty.: 1

Optimate 3 Battery Charger

OptiMate 3 is the most trusted fully sealed

battery saving charger and maintainer

– The most popular motorcycle charger

world-wide! Fully automatic multi-step

program brings the battery safely to

full charge. The all-in-one tool for 12V

battery care at home. Diagnoses, recovers,

charges, tests and optimally maintains,

automatically. No risk of overcharging.

Totally safe for vehicle electronics. Sparks

suppressed. Safe for long-term battery

maintenance. Automatic shut-down if

short-circuited or battery disconnected.

7 Step fully automatic operation (low volt

(from2V) start, desulfate safe, pulse safe,

controlled charge, optimize, test after

charge, Optimate maintenance).

• For AGM, GEL, STD 12V batteries from

2.5 – 38Ah

• 0.8A (constant current) charging amps

• Nominal: 12V range: 2V - 14.4V

charging volts

• Fully automatic operation

• Indoor / Outdoor use (lowest

temperature: -40°F / -40°C).

• Weatherproof case with wall mount

• Low Volt Start of 2V + 2 step

desulphation recovery

• Including weatherproof battery lead

(SAE) and battery clip set


For all AGM, Sealed Maintenance

Free, GEL, and Lead Acid Batteries ,


OptiMate Lithium 4s 0.8A

8-step 12.8V 0.8A sealed battery saving

charger and maintainer. Ultimate

protection for your high performance

Lithium battery. Fully automatic multistep

program brings the battery safely

to full charge – Connect to the battery

and OptiMate Lithium 4s 0.8A does the

rest, no supervision required! For Li-Ion

12.8V / 13.2V power sport battery types

made with LiFePO4 / LFP technology.

Maintains and protects LiFePO4 batteries.

No risk of overcharging. Totally safe for

vehicle electronics. Sparks suppressed.

Safe for long-term battery maintenance.

Automatic shut-down if short-circuited or

battery disconnected.

8 Step fully automatic operation (low volt

(0.5V) start, low volt safe, safe - monitor

cells, test - cell damage, cell-balancing

charge, optimize, test after charge,

Optimate 365 maintenance).

• For Lithium (LiFePO4) 12.8/13.2V

batteries from 1 – 10Ah

• 0.8A (constant current) charging

• Nominal: 12.8V range: 0.5V - 14.4V

charging volts

• Fully automatic operation

• Indoor / Outdoor use (lowest

temperature: -40°F / -40°C)

• Weatherproof case with wall mounts

• Low Volt Start of 0.5V + 3 step low volt

save and test

• Including weatherproof battery lead

(SAE) and battery clip set


For all Lithium, AGM, Sealed

Maintenance Free, GEL, and Lead Acid

Batteries , Unit: Each , Qty.: 1

6.102

APPAREL

Premium SAE Extension Cable for Battery

Charger

• Premium extender for battery chargers rated up to 5 Amps

• Rated for 5 Amp continuous use (7 Amp max.)

• Corrosion protected – Nickel coated contacts

• Rubber in-line seal protects SAE connection against dirt and

water

• Rated for low temperatures and outdoor use

• Thicker insulation (1,2 mm) for better protection


PART#

DESCRIPTION

926602 Length: 180 cm

926603 Length: 460 cm

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

Pro-1 Duo Battery Charger, Tester, Power

Supply

OptiMate PRO-1 DUO is the professional combination battery

charger-tester and power supply for powersport, small craft,

machine professionals, repair shops and battery retailers. 3

Selections: Select a charge mode for 12V lead-acid OR 12.8V

LiFePO4, or select PowerSupply mode for battery support during

vehicle diagnostics, tuning or troubleshooting. For all power

sport 12V batteries including lead-acid (Pb) - STD (with filler

caps), AGM & GEL (sealed VRLA) and Li-Ion made with LiFePO4 /

LFP technology.

• Automatic fast battery activation (green test light indicates

battery is healthy and sufficiently charged)

• Smart recovery mode for deep discharged batteries

• Pushbutton activated BMS reset for LiFePO4 batteries

• Test light indication for good (80 to 100%), ok (60 to 80%) and

bad (below 60%) batteries

• Powersupply mode provides constant power for vehicle

tuning, diagnostics and troubleshooting

• Global input - 100 to 240V 50-60Hz

• AC power socket for Class 2 power cords

• Portable use – vehicle hanging hook and wall receiver included

• PRO use: 12V lead-acid STD, AGM from 3-50Ah and

12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah

• Normal use: 12V lead-acid STD, AGM from 3-240Ah and

12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah.

• 0.4A to 10A variable charging amps(Ampmatic)

• 0.5V to 22V charging volts @ 12V lead-acid batteries

• 0.5V to 14.4V charging volts @ 12.8V/13.2V lithium batteries

• 11V to 13.6V powersupply

• IP40 indoor rating

Part#: 926600 , Field of Application: 12V batteries

including lead-acid (Pb) - STD (with filler caps), AGM &

GEL (sealed VRLA) and Li-Ion made with LiFePO4 / LFP

technology , Unit: Each , Qty.: 1

Solar Duo 10W Battery Charger

6-step 12V / 12.8V 0.83A sealed solar charger and maintainer.

OptiMate Solar DUO 10W is a smart sun powered charger and

maintainer for all 12V batteries. The optimate 1 duo adapts

automatically to the connected battery type (Lithium or

standard). The controller’s fully automatic multi-step program

brings the battery safely to full charge – Connect to the battery

and OptiMate Solar DUO 10W does the rest, no supervision

required. The fully automatic multi-step program of the

controller brings the battery to full charge. OptiMate Solar

DUO’s smart control guarantees longer battery life and more

battery power!

For all 12V power sport battery types including lead-acid (Pb) -

STD (with filler caps), AGM and GEL (sealed VRLA), Li-Ion made

with LiFePO4 / LFP technology.

• Converts low solar energy to efficient pulse charge

• DAY: Charge and maintain / NIGHT: monitor charge level

• Safe to leave connected - full electronic protection

• Saves your dead battery from as low as 4V

• Displays battery state of charge

• Energy saving technology

• IP 54 - works in any weather

• Solar panel specs:

• 10 Watts max.

• 12V / 12.8V

• Dimensions: 249 x 376 x 26 mm

• Outdoor Use

• Solar panel output cable 2000 mm long with SAE connector

Part#: 926599 , Field of Application: 12V batteries: leadacid

(Pb) - STD (with filler caps), AGM and GEL (sealed

VRLA), Li-Ion made with LiFePO4 / LFP technology , Unit:

Each , Qty.: 1

O-125 Charge Level Monitor SAE Adapter

Cable

SAE to SAE adapter with state of charge monitor that connects

directly to the SAE battery lead fitted to the 12V battery in your

parked powersport vehicle.

• Ideal for 12V lead-acid & 12.8V lithium LFP (LiFePO4) batteries

• SAE quick connect charge port for charging battery when

needed

• SAE connection system fits any SAE standard 2-pin connector

• Includes in-line seal that mates with OptiMate SAE

• With weatherproof sealing cap protects against dirt and water

• Battery status indication every 3 seconds (LED blinks)

• For high performance AGM and lithium-ion LFP

Part#: 926601 , Field of Application: Fits any battery SAE

standard 2-pin connector , Unit: Each , Qty.: 1


EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

6.103

EDITION 50

6

Junior 800, Selectable Lead

Acid/Lithium

• Output: 12 V @ 800 mA

• Input voltage: 220 to 240 Vac, 50/60 Hz

• Charger weight: 467 grams

• Size: 8,3 cm x 5 cm x 3,5 cm

• ISMTM Microcontroller constantly

updates charge sequence for smooth

transitions between charging steps

• Spark proof

• Short circuit protected

• Reverse hook-up protection

• Safety timer

• Selectable for AGM, flooded and GEL or

Lithium (LiFeP04) batteries

895139 800 mamp Power Battery Tender

Battery Tender Accessory Bag

This bag will accommodate the Battery

Tender Junior or the Battery Tender Plus

including all connectors and accessories.

2851017 Accessory bag

5A Power Tender Series High

Efficiency by Battery Tender

The Battery Power Tender Plus High

Efficiency is a 5 amp battery charger that

will fully charge and maintain a battery

at its proper storage voltage without

the damaging effects caused by trickle

chargers.

• Short Circuit Protected

• Reverse Polarity Protected

• Safety timer: 72 hours

• Dimensions: 3.99 W x 8.26 L x 2.34 H

890449 Battery Charger, Power Battery

Tender® Plus HI 12 V 5 A

Lithium Battery Charger

WP800 by Battery Tender

• Input: 120 VAC @ 60 Hz

• Designed to charge any 12 volt Lithium

(LiFePO4) Battery

• Spark Proof

• Short Circuit Protected

• Reverse Polarity Protected

• Auto recovery mode for batteries with

very low voltage

• Weatherproof

• Weighs only 1 Pound

890547 Lithium battery charger WP800

Waterproof Automatic Battery

Charger 0,8A

• Spark-proof, even when the leads are

touched together

• Reverse polarity protected

• Will not damage charger if hooked up

incorrectly

• Easy to install and use

• Safe in all weather conditions

• Will safely charge and maintain any size

12-volt battery though 200 amp-hour

capacity

• Safe and easy to use on all lead acid

batteries

• Solid-state two color LED indicates start

of charge

• Output: 12V @ 800mA - Input voltage:

220 to 240Vac, 50/60Hz


PART#

FIELD OF APPLICATION

686744 For all Lead Acid Batteries, with

EU Plug

686838 For all Lead Acid Batteries, with

UK Plug

Battery Tender 12-Volt 4-Bank

International Chargers

The 4-Bank International battery tender

charging station works anywhere in the

world! Designed to fully charge a battery

and maintain it at proper storage voltage

without the damaging effects caused by

trickle chargers.

• Features 4 independent charging

systems and 12 volts at 1.25 amps per

station

• Weighs less than 3 lbs.!

• Operates anywhere in the world (100-

240 VAC 50/60 Hz.)

• Microprocessor controlled constant

current charging

• Reverse polarity protected

• Complies to all International safety

standards

• Perfect for all AGM, sealed maintenance

free and flooded batteries

• Optional 25 ft. extension leads available

Battery Tender 4-Bank Chargers

686834 For Europe

6.104

APPAREL

895140

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

Battery Tender is a revolutionary

charger that charges any 12 or 6-volt

lead-acid or gel battery and keeps

it at full charge forever, WITHOUT

DAMAGING OR DESTROYING THE

BATTERY! It is NOT a trickle charger.

Just hook it to a battery and forget it.

Comes with alligator clips and quick

disconnect connections.

895141

LIGHTING

ELECTRICAL

EXHAUST

LED. Battery Gauge

Simple two-wire connection & a compact

size (about 2” x 3/4” x 3/16”) make

installation a breeze. Universal fitment

designed for all 12 V charging systems.

Fits: Universal Fitment for 12V Battery

Charging Systems

774219 Chrome (ea)

774218 Black (ea)

Gauge LCD Battery Meter

• QDC Plug

895143 Gauge LCD Battery

USB Port Charger

• QDC Plug

895144 USB Port Charger

1,25Amp and 4Amp Dual

Selectable Power Tender

• Output: 12V or 6V switchable

• Input voltage: 220 to 240Vac, 50/60Hz

• Charger weight: 612,3 grams

• Size: 17,2cm x 9,3cm x 4,9 cm

• ISMTM Microcontroller constantly

updates charge sequence for smooth

transitions between charging steps

• Spark proof

• Short circuit protected

• Reverse hook-up protection

• Safety timer

• Designed for AGM, Standard, Flooded

and GEL batteries

• Lithium (LiFeP04) - Switchable

895140 1,25Amp Power Battery Tender

895141 4Amp Power Battery Tender

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

Flat Type 2 Pole Neoprene Molded Connector

This flat type 2 pole neoprene molded connector with 12”, 18 gauge wire is ideal for connecting electrical

systems.

• Pre-wired

• Ready to install

• Molded case

• All-round weather protection

Part#: 928098 , Field of Application: Universal , Unit: Set , Qty.: 1

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.105

EDITION 50

6

CH-26000 Battery Charger

• Switchable for Lead-acid / AGM / Gel / Lithium batteies

• Output: 6V, 12V or 24V switchable

• Operating voltage: 200V-250V/AC50HZ

• Charging current: 6V - Auto/8A/24A ; 12V - 4A/12A/26A ; 24V -

2A/6A/13A

• LCD Display

• USB ports DC 5V

• Winter mode

• Repair function

• Automatic lithium BMS unlock

• Provide protection against: over temperatur, short circuit,

overload, high voltage, low voltage, reverse connection,

lithium battery BMS unlock

Part#: 921666 , Description: 26A , Unit: Each , Qty.: 1





• Charging current: 1A-6V / 1A-12V








• Output: 6V, 12V or 24V switchable


• Charging current: 6V - 4A/8A/15A ; 12V - 4A/8A/15A ; 24V -

2A/4A/8A

• LCD Display

• Repair function










• Charging current: 3.5A-6V / 3.5A-12V

• Repair function





Part#: 921664 , Description: 3,5A , Unit: Each , Qty.: 1

6.106

APPAREL

SEATS &

TOURING

Stereo Accent

Made from lightweight ABS. No tools or

disassembly required for installation.

605185

918448

FOOT

CONTROLS

Fits: ‘96-’13 Electra Glides, ‘06-’13 Street

Glides & ‘09-’13 Trike

773765 Chrome (ea)

HAND

CONTROLS

605186

LIGHTING

Switch Panel Accent by

Kuryakyn

This trim places an attractive chrome

frame around the ignition & the adjacent

control switches. The smooth chrome

surface is much easier to keep clean than

the stock matte finish. Simple peel-&-

stick installation requires no tools or

disassembly.

605184 Switch accent panel, fits 96-13


Speaker Grills by Kuryakyn

Crank it up! While you’re enjoying great

travelin’ tunes, add some visual punch to

your speakers. With these trick grills, your

speakers will look as good as they sound!

For all Electra and Street Glides. Sold in

pairs.

605185 Zombie speaker grills, fits 96-13

Touring/Trike

605186 Flame speaker grills, fits 96-13

Touring/Trike

918449

Plug-n-Play Complete Wiring

Installation Kit with Quick

Connector for Detachable Tour

Pack

Everything you need to connect the

wiring on your detachable OEM or aftermarket

tour pack! Allows for a plug-nplay

wiring harness with quick-disconnect

feature for easy removal.

Unit: Kit , Qty.: 1

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS


Rear Speaker Accents

Look great by themselves but are also

required to install matching Speaker Grills

to your rear speakers. Installs over stock

black rear speaker rings. Includes polished

stainless hardware.

Fits: ‘98-’13 FLHTCU/I, ‘10-’13 FLHTK,

‘08-’11 FLHTCUSE, ‘11-’13 FLTRU & ‘09-’13

FLHTCUTG

773792 Rear Speaker Accents (pr)

Note: Will also fit ‘98-’13 FLHTC if equipped with Accessory

Rear Speaker Kit.

OEM Delphi Tour Pack Light

Bar Connector

OEM Tour-Pack Light Bar Connector Kit,

includes terminals, wire seals, and TPA

lock.

• 5-position connector

• OEM# 69200225

Part#: 918470 , Fitment: 14-24

Touring, 14-24 Trike , Fitment Note:

For models, equipped with OEM tour

pak , OEM #: 69200225 , Unit: Kit ,

Qty.: 1

Complete Wiring Installation

Kit for Retrofitting Tour Packs

Complete Tour Pack Wiring Installation

Kit for Retrofitting a 2014-Up tour pack

to 2010-2013 Street & Road Glide Models.

Everything you need to connect the

wiring on your OEM or after-market tour

pack light! Allows for a plug-n-play wiring

harness with quick-disconnect feature for

easy removal.

• Kit includes everything you need to

wire up an OEM 2014-Up King Tour

Pack onto 2010-2013 Street & Road

Glide Models.

Unit: Kit , Qty.: 1

PART#

FITMENT

918451 09 FLTRSE3, 10 FLHXSE, 11

FLHXSE2, 12 FLHXSE3, 12

FLTRXSE, 13 FLTRXSE2, 13

FLTRXSE2 ANV

918450 10-13 FLHX, 10, 13 FLTRX, 13

FLTRU

918448 14, 18-23 FLHX,

15-18, 20-21,

23 FLHXS, 15-

23 FLTRXS, 18

FLHX ANV, 18

FLHXS ANX,

18-23 FLTRX, 19

FLXHS, 20-21

FLHT, 22-23

FLHXST, 22 FLHX

, 22-23 FLTRXST,

22 FLH, 23

FLHXANV

918449 99-13 Touring, For Retrofitting

(except 09 a 2014-Up

FLHTCUSE4, tour pack to FL

09 FLTRSE3, 10 1999-2013

FLHTCUSE5,

10 FLHXSE,

10-13 FLHX,

10, 13 FLTRX,

11 FLTRUSE,

11 FLHXSE2,

11 FLHTCUSE6,

12 FLHTCUSE7,

12 FLHXSE3,

12 FLTRXSE, 13

FLHRSE5, 13

FLHTCUSE8, 13

FLTRXSE2, 13

FLTRXSE2 ANV,

13 FLTRU)

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.107

EDITION 50

930813

930830

930814

930828

930815

930816

6

Free-Flex

Cup and Phone Holder

Don’t be forced to choose between your drink and your device.

While other phone mounts kick your beverage to the curb, the

Free-Flex Device and Cup Holder lets you sync AND drink! Made

in the U.S.A., this sleek and versatile mount fits inside virtually

any standard car, truck, SUV or UTV cup holder. The innovative

design leverages tension caused by the durable nylon “flexing”

out from within the cup holder, forming an extremely secure

base that keeps the cup holder’s intended use intact. Flexible

extended arms create the perfect perch that accommodates

a wide variety of phone sizes and cases, so you can keep your

hands free and focus on the road.


battery.dokk Power Adapter

The smart power adapter for connecting the CAYO moto.dokk

directly to the vehicle battery via USB-C plug.

• Quick and easy to connect directly to the battery terminals

• Switches off when not in use, no battery discharge

• No time-consuming search for ignition plus


930895 930895

car.dokk Phone Bracket System with Inductive

Charging

High-quality mounting system with inductive charging function

for smartphones in the vehicle. The patented clamp ensures

stable attachment to the ventilation slats and ensures that the

phone remains securely in position while driving. The device

is attached magnetically and can be used in both portrait and

landscape format. The inductive charging function with up to

15W enables fast, wireless charging. Compatible with CAYO

cases, as well as all MagSafe-compatible phones and accessory

cases. The elegant metal housing is coated in black for optimum

dissipation of the heat generated during charging. With its flat,

unobtrusive design, the car.dokk blends harmoniously into the

vehicle interior and adds an elegant touch to any cockpit.

Note: Not suitable for round ventilation outlets.


930818

930829

930832

930833

phone.dokk Phone Case

The elegant and flat case protects your valuable smartphone

from scratches and drops. MagSafe compatible with extra strong

magnets for attaching to magnetic holders and charging pods.

Integrated recess for secure and quick locking with the CAYO

mounting systems.


PART# COLOR DESCRIPTION

930810 Opaque Black For iPhone 14 Pro

930811 Clear White For iPhone 14 Pro

930812 Smoky Black For iPhone 14 Pro

930813 Opaque Black For iPhone 15 Pro

930814 Clear White For iPhone 15 Pro

930815 Smoky Black For iPhone 15 Pro

930816 Clear White For iPhone 15

930817 Smoky Black For iPhone 15

930818 Opaque Black For iPhone 15

930819 Clear White For iPhone 15 Pro Max

930820 Opaque Black For iPhone 15 Pro Max

930821 Smoky Black For iPhone 15 Pro Max

930822 Clear White For iPhone 14/13

930823 Smoky Black For iPhone 14/13

930824 Opaque Black For iPhone 14/13

930825 Clear White For iPhone 14 Pro Max

930826 Opaque Black For iPhone 14 Pro Max

930827 Smoky Black For iPhone 14 Pro Max

930828 Clear White For Samsung A54

930829 Smoky Black For Samsung A54

930830 Opaque Black For Samsung A54

930831 Clear White For Samsung S23

930832 Smoky Black For Samsung S23

930833 Opaque Black For Samsung S23

930834 Clear White For Samsung S23 Ultra

930835 Smoky Black For Samsung S23 Ultra

930836 Opaque Black For Samsung S23 Ultra

6.108

APPAREL

SEATS &

TOURING

930808

FOOT

CONTROLS

930806 930806

uni.dokk Universal Adhesive Pad

Your phone case is not included yet in the Cayo case line? No

problem, simply stick the Cayo universal adhesive pad to the

back of your smartphone or case. The high-quality adhesive pad

guarantees secure adhesion to almost all surfaces.


HAND

CONTROLS

LIGHTING

ELECTRICAL

930806 930806

930894

EXHAUST

bike.dokk Phone Bracket System

The quick and secure mounting system for your smartphone.

Suitable for bicycle or motorcycle. Select matching case or

universal pad separately.

• Very small and compact

• Quick and secure attachment

• Portrait and landscape format without conversion

• Suitable for all handlebar diameters


wall.dokk Plug-In Power Supply

The high-quality, small and powerful plug-in power supply

transforms any 220V socket into a lightning-fast charging

station. Thanks to its compact design, this power adapter fits

in any bag and is the ideal companion for on the go. Whether

you want to charge your smartphone, tablet or another USB-Ccapable

device - with 20W of power, your device will be supplied

with new energy in no time at all.


INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

930805 930805

930893 930893

FRAMES

930805

moto.dokk Phone Bracket System with

Inductive Charging

The fully equipped mounting system. Attaches your smartphone

quickly and securely to any motorcycle. Choose a suitable case or

universal pad. Direct connection to the vehicle battery is possible

with the Cayo battery.dokk.

• Integrated vibration decoupling

• Integrated inductive charging

• Smartphone docking in portrait and landscape format

• Suitable for all handlebar diameters

Part#: 930805 , Color: Black , Unit: Kit , Qty.: 1

disc.dokk Charging Pod

The CAYO disc.dokk is a high-quality, MagSafe-compatible

charging pod with up to 15W power and is a perfect match for

the CAYO phone.dokk cases. The solid metal housing in black

ensures optimum passive cooling and its compact design makes it

ideal for traveling or any desk. An integrated flip ring allows the

phone to be positioned vertically or horizontally - ideal for video

calls or watching movies. The soft-touch surface protects the

smartphone or case from scratches and at the same time ensures

a pleasant, high-quality feel.


FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.109

EDITION 50

6

Self Leveling Drink Cup Holder

by RAM Mounts

The perfect accessory for any vehicle

including motorcycles, ATVs and Big Rigs.

Easily installed and positioned to keep

your favorite beverage within reach comes

with a RAM can insulator. Take a corner,

this holder is ready to ride.

893924 RAM level cup drink holder

with koozie

Tough Claw Mount by RAM

Mounts

Consists of the small Tough-Claw base

and universal X-Grip holder. The X-Grip

holder has a clean and clever four leg

design that sports great holding power

without hiding your smart-phone behind

foam pads and plastic. The X-Grip holder

expands and contracts for perfect fit of

most smart phones. This mount rotates

360 degrees.

893923 RAM Tough-Claw mount with

universal X-Grip phone cradle

U-Bolt Mount by RAM Mounts

Consists of hardware for mounting to

either brake/clutch reservoirs and rails that

are 0.5” to 1.25” in diameter, short length

double socket arm and universal X-Grip®

cell phone cradle.

893921 RAM combination brake/clutch

reservoir U-Bolt mount with short

arm and universal X-Grip cell/

iPhone cradle

U-Bolt Handlebar Mount by

RAM Mounts

Consists of a zinc coated u-bolt base,

standard size aluminum double socket

arm and 1” diameter ball with custom

GoPro Hero adapter. With a RAM 1”

diameter patented rubber ball and socket

system that has adjustment points at both

ends of the double socket arm, absorbs

shock and vibration.

893922 RAM handlebar mount, zinc coated

U-bolt & 1” ball with custom

GoPro Hero adapter

893915

893914

Rail U-Bolt Mount by RAM

Mounts

This mount consists of a zinc coated u-bolt

base, double socket arm and universal

X-Grip cradle. Included in this package

is hardware that will accommodate rails

from 0.50” to 1.25” in diameter.

893919 RAM rail U-Bolt mount universal

with X-Grip

Torque Handlebar Mount by

RAM Mounts

The new RAM Torque handlebar and rail

mounting base. We’ve paired a B-sized 1”

rubber ball base that accommodates bars

3/4” - 1” in diameter with the dynamic

X-Grip for phones. Sizing inserts are

included to provide a snug fit and offer

additional protection for the rail.

893920 RAM bar mount 3/4”-1”ø short

with X-Grip

Phablet X-Grip Mounts by

RAM Mounts

The RAM-X-Grip for Phones/Phablets has

a clean and clever four leg design that

provides great holding power without

hiding your phone or mobile device

behind foam pads and plastic.

Cradle Dimensions

• Min width = 1.75“ (max height = 5.5“)

• Max width = 4.5“ (min height = 3.25“)

893915 Universal X-Grip large phone/

phablet cradle

Cell Phone Mounts

Cradle Dimensions

• Min width = 1.875” (max height =

4.25”)

• Max width = 3.25” (min height = 2.25”)

893914 Universal X-Grip cell/iPhone cradle

Handlebar/Rail Mount by RAM

Mounts

This mount consists of a zinc coated u-bolt

base, double socket arm and universal

X-Grip cradle. Included in this package

is hardware that will accommodate rails

from 0.50” to 1.25” in diameter.

893917 RAM handlebar rail mount with

zinc coated U-Bolt base and universal

X-Grip cell/iPhone cradle

GoPro Hero Adapter by RAM

Mounts

Here we offer a sleek new adapter that

will bring two revolutionary product

lines together and open up a world of

possibilities. While the GoPro line of

mounting accessories is nothing to scoff

at.

893916 RAM custom GoPro Hero adapter

with 1” rubber ball

6.110

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

Mirror Post Base by RAM

Mounts

Fits most H-D Touring models 08-.

893913 RAM Mount mirror post base

with 1” rubber ball for Harley

Davidson motorcycles

Torque Handlebar/Rail Mount

by RAM Mounts

The new RAM Torque handlebar and rail

mounting base. We’ve paired a B-sized 1”

rubber ball base that accommodates bars

3/4” - 1” in diameter with the dynamic

X-Grip for phones. With a RAM 1”

diameter patented rubber ball and socket

system that has adjustment points at both

ends of the double socket arm.

893918 RAM Torque 3/4” - 1” ø handlebar/rail

base with 1” ball, medium

arm and X-Grip for phones

Combination Base by RAM

Mounts

The RAM combination handlebar and

brake/clutch reservoir base provides

the ultimate flexibility for mounting to

your motorcycle. Mount to either your

handlebar or brake/clutch..

893912 RAM motorcycle combination

base for handlebar or brake/

clutch reservoir with 1” ball

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

Double Socket Arm by RAM

Mounts

These clamps provide a socket at both

ends that accommodates 1” ball bases. A

single spring inside the arm opens the end

sockets, allowing you to pivot the ball and

socket connection.

893905 RAM Rail Base

ENGINE

GASKETS

893910

893908

TRANNY &

CLUTCH

Clutch/Brake Reservoir Base

Mount by RAM Mounts

This mount connects to your handlebar

clutch/brake clamp, left or right side, and

holds one 1” diameter mounting ball. The

chrome base fits the control clamps on your

motorcycle with 40mm x 6mm stainless steel

hardware, provided in the kit.

DRIVELINE

WHEELS, TIRES

& BRAKES

893909

893907

893911 Chrome motorcycle brake/clutch

reservoir base with 1” ball

FRAMES

Double Socket Arm by RAM

Mounts

These clamps provide a socket at both

ends that accommodates 1” ball bases. A

single spring inside the arm opens the end

sockets, allowing you to pivot the ball and

socket connection.

Chrome

893910 Middle 90 mm

893909 Short 60 mm

Black

893908 Middle 90 mm

893907 Short 60 mm

Torque Mounting Base by RAM

Mounts

The RAM Torque handlebar and rail

mounting base has a 1” rubber ball and

accommodates bars ” to 1” in diameter.

Sizing inserts are included to provide a

snug fit and protection of the rail.

893906 1” diameter handlebar/rail base

with 1” ball

Free-Flex Cup and Phone

Holder

Don’t be forced to choose between your

drink and your device. While other phone

mounts kick your beverage to the curb,

the Free-Flex Device and Cup Holder lets

you sync AND drink! Made in the U.S.A.,

this sleek and versatile mount fits inside

virtually any standard car, truck, SUV or

UTV cup holder. The innovative design

leverages tension caused by the durable

nylon “flexing” out from within the cup

holder, forming an extremely secure base

that keeps the cup holder’s intended use

intact. Flexible extended arms create the

perfect perch that accommodates a wide

variety of phone sizes and cases, so you

can keep your hands free and focus on

the road.

Part#: 776474 , Color: Black , Unit:

Each , Qty.: 1

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.111

EDITION 50

6

USB Type-A Power Supply for Handlebar

Mount

• Input: DC 12V

• The USB port becomes 5V2.4A output, and the tablet terminal

can be charged

• A convenient product that can charge a battery such as a

smartphone

• You can choose the mounting method according to usage

situation

• Even sudden rain with the book cap covering the power

supply inlet is safe

Part#: 923952 , Color: Black , Unit: Set , Qty.: 1

Slim-Mount Two-Port USB Type-A Power

Supply

USB power socket with two ports and a slim size with a thickness

of 13.5 mm and a clean appearance.

Handle clamps are compatible with 22.2 and 25.4 mm and can be

mounted on a wide range of vehicles.

• USB 2 port (MAX 5V4.8A)

• Input voltage: DC12V

• Input voltage range: DC10V-16V

• Stand-by current (when not used): 6 mA

• Output voltage: 4.8-5.2 V

• Output rated current: 2.4A (1 port)

• Output rated efficiency: 12W (1 port) / 24W (2 ports total)


L-Shaped USB Cable

• L-shaped

• Wire length 200mm

• 18W(5V/3A, 9V/2A, 12V/1.5A)


PART#

DESCRIPTION

923953 USB Connector Type C to Type C

923954 USB Connector Type C to Lightning

923955 USB Connector Type A to Type C

923956 USB Connector Type A to Lightning

Slim-Mount One-Port USB Type-C Power Supply

in Aluminium Case

• Aluminum housing

• For USB PD(Power Delivery)

• Input DC12V

• Output 5V/3A, 9V/2A, 12V/1.5A

• Max. 18W

• For 22,2/25,4mm handlebars (22,2mm adapter included)

• Powers on with ignition key

• Water-resistant when closed

• CE approved

Part#: 925202 , Color: Black , Certification: ECE-Approved ,


USB Type-C Power Supply for Handlebar Mount

• Type-C for USB PD (Power Delivery)

• Work with main switch

• Input DC12V

• Output 5V/3A, 9V/2A, 12V/1.5A

• Max. 18W

• Including mini mounting stay

Part#: 923951 , Color: Black , Unit: Set , Qty.: 1

6.112

889721

889711

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

889720

Eklipes Bike-To-Bike Jr. Jump-

Start Harness

Jump start one vehicle from another by

simply plugging this cable directly into

your 2000 Amp EZ Jump-Start Battery

Harness.

HAND

CONTROLS

LIGHTING

891960

889720

• Jump-start extension cable

• Battery terminal alligator clips

889715 Eklipes Bike-To-Bike Jr. jump start

kitç

ELECTRICAL

EXHAUST

INTAKE

Cell Phone Mount for

Handlebars

• Securely fits any phone up to 3-1/4“ x

7“

• Durable Flex ball joint allows 360°

rotation and flexibility

• Design with quick-fasten technology for

easy on-the-fly mounting and removal

• Fits 7/8“, 1“ and 1-1/4“ handlebars

891960 Cell phone mount

Eklipes Viper smartphone and

GPS adapter socket

• Fits Viper handlebar brackets (above)

• Smartphone or GPS power socket

• # 889720 includes 2000 A EZ Jumpstart

12 V battery harness

889720 Chrome

889721 BlackEklipes Viper Adjustable

Dual Ring Handle Bar Bracket

• Fits all industry-standard 1 inch 12 V

power sockets

• Handle bar mount bracket ONLY

• 1 ”, 1” and 7/8” insert rings, chrome or

black

889711 Eklipes Viper, black

Eklipes Bike-To-Bike Jump-

Start Harness

• Jump-start extension cable

• Battery terminal alligator clips

• Includes Eklipes EZ jump-start harness

889716 Eklipes Bike-To-Bike jump start

kit including EZ jump-start harness

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

NAMZ Universal Cigarette

Lighter to USB Charger

Adapter

670886 Sold each

FRAMES

FORKS &

SHOCKS

Duo USB Smart Charger with

Battery Voltage Display

• Automatically adjusts current to avoid

overcharging devices

• Digital voltage display reads the output

of vehicle battery

• LED in USB ports

891961 Duo USB Smart charger

Eklipes EZ Jump-Start Harness

Jump starting between any two Power

Sports Vehicles.

• 2 ft (approx. 65 cm) long harnes

• Handles up to 2000 cranking amps

• 15 A fuse

• Waterproof caps

889714 Eklipes EZ jump-start harness

NAMZ “On Board” Power Port

with Dust Cover

670882 For 94-13 Touring, 09-13 Trike

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


6.113

EDITION 50

77896

Hidden Antenna for Touring Models

Mount it anywhere, in virtually any vehicle (UTV, boat, RV or motorcycle), and in any position! Kuryakyn‘s flexible and discreet

Hidden Antennas can be tucked away virtually anywhere for a clean look while enjoying 77897 all the benefits of AM/FM/Weatherband

radio!

• Antennas are 11“ long with 2“ of cable

• Requires no power wire; simple plug-in installation

• Offered with universal round antenna connector, or with Harley-Davidson-specific connector for 2014-newer models

• Provides AM/FM & Weatherband signal (no CB radio capabilities)


6


77896 15-23 Indian Scout, (except 18-23 Scout Bobber, 21-23

Scout Bobber Twenty, 23 Scout Bobber Sixty)

77897 14-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE,

24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 14-24 FLHTCUTG, 18

FLHTCUTG ANV, 20-22 FLHTCUTGSE, 23-24 FLTRT

Only for Models with Factory Stereo

Only for models with HD factory

sound system

With Universal

Connector

With Plug and Play

Connector for 14-22 H-D

USB Power Port

Featuring two USB ports (bottom 1.0A & top 2.1A). Mount anywhere you choose including inside your tour pack, on the dash, or on

your handlebars. Requires 1” x 1” flat surface or 1” of straight section on 1” bar for mounting. Connects directly to battery with inline

fuse.


PART#

COLOR

771703 Black

771688 Chrome

771423

771483

Electrical Power Point

Keep your cell phone, iPod, GPS, air pump or any other electrical device charged while on the road. Comes with everything you need

to connect directly to your battery with a quick disconnect.

771423 1” Bars (ea)

771476 1-1/4” Bars (ea)

771483 All 82-84 FL Shovel, 82-84 FX Shovel, 85-94 FX Model, 82-20 Sportster, 91-17 Dyna, 84-24 Softail, 85-24 Touring, 09-24 Trike,

02-17 V-Rod, 15-24 Indian Bagger, (except 24 Super Chief 111, 24 Super Chief Limited 116, 24 Sport Chief 116, 23-24 Super

Chief Limited), 12-24 Indian Cruiser, (except 23-24 Sport Chief), 15-24 Indian Touring, (except 22-24 Pursuit Dark Horse, 22-24

Pursuit Limited, 23 Pursuit Elite), 15-25 Indian Scout

6.114

Section 06 Custom Chrome Europe Catalog 2025

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?