Section 12 Custom Chrome Europe Catalog 2026

12

DRIVELINE

CHECK OUR DEALER STORE | WWW.CUSTOM-CHROME-EUROPE.COM

EDITION 51

697135

696548

697130

697133

697136

2 Inch Open Belt Drive for Shovelheads with

Motor Plate

BDL’s new 2” belt drives feature their beefy one piece 6061-T6

polished billet motor plate, their new shorty starter housing and

starter gear cover and their new side guard. These also include

BDL’s ball bearing lock up clutch. The Shovelhead version is also

available with a black All-Balls starter.

642646 Polished fits all Shovelhead models 70-78 (Comes with

All-Balls starter)

697133 Black fits all Shovelhead models 70-78

696548 Shovelhead 70-78, polished

642664 Replacement 2" wide primary 142 tooth belt

697142

890047

12

697131

2 Inch Open Belt Drive for Softails with Motor

Plate




BDL’s ball bearing lock up clutch.

697130 Polished fits all Softails 90-06

697131 Black fits all Softails 90-06

697135 Polished fits all Softails 07-17 (except FXCW/C & FXSB)

697136 Black fits all Softails 07-17 (except FXCW/C & FXSB)

642664 Replacement 2" wide primary 142 tooth belt

2 Inch Open Belt Drive for Touring models with Motor

Plate




BDL’s ball bearing lock up clutch. With mount for heel-toe shifter

697141 Polished fits all Touring models 07-13

697142 Black fits all Touring models 07-13

Replacement starter ring gears

890047 BDL starter ring gear for models 07-17 (69 teeth)

BDL 2-3/4” Open Primary Replacement Belt

Made from 6061 billet aluminum and highly polished comes

with a unique side guard and rear pulley cover. Includes a

52 tooth front pulley and a 69 tooth rear pulley both 69mm

wide with a 142 tooth belt. Also featured in this kit is the BDL

patented Ball Bearing Lock-up Clutch for positive engagement

with minimal clutch pull.

642699 Replacement 2-3/4" wide primary 142 tooth belt

12.2

APPAREL

A

B

SEATS &

TOURING

FOOT

CONTROLS

C

I

L

J

2“ Open Belt Drive Kit for Miwaukee Eight

Softail

• 2“ open belt drive kit

• 2 piece motorplate

• Profile and design front pulley

• Diaphragm Spring (6) Hole

Color: Black, Anodized , Description: 52 Tooth Front/69

Tooth Rear, 142 Tooth 2“ Belt , Material: Aluminium , Belt

Pulley Width: 2“ , Unit: Kit , Qty.: 1

HAND

CONTROLS

LIGHTING

ELECTRICAL

PART#

FITMENT

K

G

D

E

F

918557 18 FLFBS 114 ANV, 18 FLFBS 114 ANX, 18-20 FLFBS 114,

18-20 FLFB, 18 FXBRS 114 ANX, 18-20 FXBRS 114, 18-19,

23-24 FXBR, 21-24 FLFBS, 21-22 FXBRS, 23 FLFBS ANV

918558 18-24 Softail, (except 18 FLFBS 114 ANV, 18 FLFBS 114

ANX, 18-20 FLFBS 114, 18-20 FLFB, 18 FXBRS 114 ANX,

18-20 FXBRS 114, 18-19, 23-24 FXBR, 19-20 FXDRS 114,

21-24 FLFBS, 21-22 FXBRS, 23 FLFBS ANV)

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

2 Inch “Shorty Drive” Belt Drive for

Shovelhead without Motor Plate

For those that want that stripped down look but still have

the convenience of a starter, BDL has you covered. This kit

was designed for electric start without using a motor plate

and includes rear pulley plate with their new “Shorty” starter

housing, 2” clutch basket, starter gear cover, rear pulley cover,

front pulley with hardware and belt.

642648 Fits all Shovelhead models 70-78

Replacement Parts for BDL 2” Open Belt Drives with

“Shorty” Starter Housing & Starter Gear Cover

B 642650 Rear Pulley Cover (Used for both Softail &

Shovelhead)

C 642651 Softail Motorplate

F 642657 Ring Gear Guard Shovelhead

G 642658 Clutch Adjustment Screw

I 642661 Front Pulley

J 642662 Complete Clutch Basket (Clutch Basket not

included)

K 642663 Hub Nut

L 642664 Replacement 2" wide primary 142 tooth belt

M 42623 Starter Pinion Gear

2” Open Belt Drive Kit for Miwaukee Eight

Touring

• 2” open belt drive kit

• 2 piece motorplate

• Profile and design front pulley

• Diaphragm Spring (6) Hole

PART# FITMENT COLOR OPERATION TYPE

900460 07-16 Touring Black Hydraulic

900461 07-16 Touring Chrome Hydraulic

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM

12.3

EDITION 51

642644

BDL 3" Belt Drive Kits with Billet Motor Plates

Beefy, one-piece 6061-T6 polished billet motor plate locks the

tranny and engine together. The fanning condition set up by the

spinning pulleys and belt creates extra cooling for the filter, and

the kit allows the oil lines to be hidden out of the way. All of

these kits include a 3"-wide belt drive unit with polished pressure

plate, double-row sealed mainshaft bearing, polished aluminum

side plate and pulley covers, and a complete ‘Competitor

Clutch’ with Kevlar® plates. For installation in wide frame/tire

applications, choose the appropriate insert to space the front

pulley out for your particular frame and driveline combination.

For Softail Models from 90-06

42644 3” belt drive kit

For Shovelhead Models with 4-Speed Ratchet Top

Transmissions from 70-E79 with Starter Motor

42579 3” belt drive kit

Note 1: Installation requires use of a 91-10 starter motor, and the use of a late 79-10 clutch arm

(CC #18430) which must be modified to provide adequate clearance.

Note 2: FX models require removal of the OEM oil tank bracket to allow proper starter fitment.

Note 3: No provision is made for footpegs or floorboards with these kits.

Replacement Belts

42515 Fits CC #612251, 42644, 642644, 697144

43036 Replacement 3” wide primary 144 tooth 8 mm belt

DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pontde Nemours and

Company.

12

RevTech 3" Open Belt Drive by BDL

RevTech and BDL have teamed up to produce this stunning, yet

affordable 3" belt drive unit. It’s the only 3" belt drive to be

fitted with BDL’s patented ball bearing lock up clutch.... a must

for big inch motors. The RevTech belt drive by BDL is completely

made in the USA and utilizes all of BDL’s proven components.

This kit includes a newly designed motor plate cut from 6061-

T6 billet aluminum and then fully polished, double row sealed

main shaft bearing, polished aluminum pulley covers and side

plate, competitor clutch with Kevlar® friction plates and newly

designed ball bearing lock up pressure plate, starter jack shaft and

housing. The kit comes complete with the standard pulley offset.

For installation on wide tire applications you must purchase an

additional pulley offset.

642644 Polished, Fits all Softail models from 90-06

697144 Black fits all Softail models from 90-06

42515 Replacement 3” wide primary 141 tooth belt

RevTech 2-3/4" Open Belt Drive by BDL

We decided to go a little narrower on the later model drives,

other than that the components are the same high quality and

the same awesome features listed above.

697146 Black fits all Softail models from 07-17 (except FXCW/C &

FXSB)

642699 Replacement 2-3/4" wide primary 142 tooth belt

DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and

Company.

BDL 3" Belt Drive Kit with 1 1/2" Offset

Beefy, one-piece 6061-T6 polished billet motor plate locks the

tranny and engine together. This kit includes a 3"-wide belt drive

unit with polished pressure plate, double-row sealed mainshaft

bearing, polished aluminum side plate and pulley covers, and a

complete ‘Competitor Clutch’ with Kevlar® plates.

612224 Fits all Softail models from 90-06


Company.

12.4

APPAREL

SEATS &

TOURING

Primo ‘Brute V’ Belt Drive Kit with Motor Plate

Primo Belt Drives 14mm, 3 1/2" wide "SUPER STREET" primary

belt drive is designed to handle all the horses your big stroker

can make. It‘s the first 3 1/2" wide, 14mm belt drive available.

PRIMO introduced the 14mm belt drive way back in 1973. Now

you can get famous PRIMO quality and performance in a super

wide 14mm belt drive for your Big Twin. Kits include polished

outer pulley/belt cover.

• Features polished motor plate and performance clutch

• Has 14mm strength and a 3 1/2" wide belt

• Easy installation

• Electric start

667511 Fits Evolution Softail models from 90-99

BDL 3"-Wide Primary Drive Kits for Kick Start

Applications

Eliminate gyroscopic imbalance and belt whipping found in

many 3" drives with a BDL drive kit that puts the inner hub a

full inch further inboard than most other belt drives. With the

rear pulley further over the main shaft virtually all instability

in the primary drive is eliminated. The 8 mm pulleys are hard

anodized and use a special belt that traps less air than HTD

belts. The rear pulley has a double row bearing that supports

a ‘Stressproof’ steel clutch hub. Also included are a clutch and

polished aluminum pressure plate. Safety guards are always

recommended with 3" drive systems.

42537 Kit with 47/72-tooth pulleys for Softail models with

splined shaft from 90-06

42536 Kit with 47/72-tooth pulleys for Softail models with

tapered shaft from late 86-89

42541 Kit with 47/76-tooth pulleys for Panhead and

Shovelhead models with splined shaft from 55-E84

42542 Kit with 47/72-tooth pulleys (for less engine speed) for

Shovelhead models with splined shaft from 65-early 84

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.5

EDITION 51

M8

Single Belt System with Classic Base Plate with Belt

Cover, Bobber Support Arm and Drop Clutch cover

Bobber Base Plate

Classic Base Plate

Triangle Clutch Cover

12

Belt Cover

Round Clutch Cover

Double Belt System with Classic Base Plate

without Belt Cover and Bone Support Arm

Drop Clutch Cover

Support Arms

Classic

Bobber

Groove

Bone

12.6

APPAREL

Single/Dual Belt Drive Kits

RWT Belt Drive systems feature a modular design. You can tailor your system precisely to your needs by choosing the desired model,

offset, color, and base plate variation, as well as opting for a single or dual belt setup. Additional customization options include

the outer support arm and clutch hub covers, available in several styles. These components can be combined with contrasting

colors to ensure your bike is a true head-turner. RWT belt systems must be ordered using the mandatory order form, which can be

downloaded here: https://onlinecatalog.custom-chrome-europe.com/orderform-rwt-belts/70912858

• Made in Austria

• Complete CAD engineered from Billet Aluminum

• Clutch included

• Bobber or Classic Base Plate

• Single or Dual Belt Belt version

• Choose options up to 20,5 mm offset

• Color Jet black (RAL 9005) or Aluminum raw

• Shown with Bobber style outer support arm

• More Support Arm Designs available

• Choose from 3 Clutch Hub Designs

Unit: Kit , Qty.: 1

FITMENT COLOR DESCRIPTION OFFSET DOUBLE BELT SINGLE BELT

18-19, 23-25 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, Aluminium Bobber Base Plate Stock 932460 932440

18-20, 25 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18

FLFBS 114 ANV, 19-20 FXDRS 114, 21-22 FXBRS, 21-24

FLFBS, 23 FLFBS ANV, 25 FLSTFI

18-19, 23-25 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, Aluminium Classic Base Plate Stock 932580 932560




18-19, 23-25 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, Black/Anodized Bobber Base Plate Stock 932450 932430




18-19, 23-25 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, Black/Anodized Classic Base Plate Stock 932570 932550




18-26 Softail, (except 18-19, 23-25 FXBR, 18-20 FXBRS Aluminium Bobber Base Plate 20,5 mm 932461 932441

114, 18 FXBRS 114 ANX, 18-20, 25 FLFB, 18-20 FLFBS

114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 19-20 FXDRS

114, 21-22 FXBRS, 21-24 FLFBS, 23 FLFBS ANV, 25 FLSTFI)

18-26 Softail, (except 18-19, 23-25 FXBR, 18-20 FXBRS Aluminium Classic Base Plate 20,5 mm 932581 932561




18-26 Softail, (except 18-19, 23-25 FXBR, 18-20 FXBRS Black/Anodized Bobber Base Plate 20,5 mm 932451 932431




18-26 Softail, (except 18-19, 23-25 FXBR, 18-20 FXBRS




Black/Anodized Classic Base Plate 20,5 mm 932571 932551

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.7

EDITION 51

TWIN CAM 96


Bobber Base Plate

Round Clutch Cover

Single Belt System with Classic Base

Plate with Belt Cover, Bone Support

Arm and Drop Clutch cover

Classic Base Plate

Drop Clutch Cover

Belt Cover

Support Arms

12

Classic

Groove

Bobber

Bone

Single/Dual Belt Belt Drive Kits






• Made in Austria


• Clutch included



• Choose options up to 45 mm offset


• Shown with Bone style outer support arm

• More Support Arm Designs to choose from available


Unit: Kit , Qty.: 1

12.8

APPAREL

FITMENT COLOR DESCRIPTION OFFSET DUAL BELT SINGLE BELT

07-17 Softail, (except 13-14 FXSBSE, 13-17 FXSB, 16-17

FXSE, 08 FXCW, 08-11 FXCWC)















































13-14 FXSBSE, 13-17 FXSB, 16-17 FXSE, 08 FXCW, 08-11

FXCWC, (except 13-14 FXSBSE, 13-17 FXSB, 16-17 FXSE, 08

FXCW, 08-11 FXCWC)


FXCWC


FXCWC


FXCWC

Aluminium Bobber Base Plate 20 mm 932501 932481






Aluminium Classic Base Plate 20 mm 932621 932601






Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Matte Black

Powder Coated

Bobber Base Plate 20 mm 932491 932471






Classic Base Plate 20 mm 932611 932591






Classic Base Plate Stock 932610 932590

Aluminium Bobber Base Plate Stock 932500 932480

Aluminium Classic Base Plate Stock 932620 932600

Matte Black

Powder Coated

Bobber Base Plate Stock 932490 932470

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.9

EDITION 51

EVO/TWIN CAM 88

Bobber Base Plate

Classic Base Plate


Belt Cover

Round Clutch Cover

12Single Belt System with Classic Base Plate Bone

Support Arm and Drop Clutch cover

Drop Clutch Cover

Support Arms

Classic

Bobber

Groove

Bone

12.10

APPAREL

Single/Dual Belt Belt Drive Kits






• Made in Austria


• Clutch included



• Choose options up to 45 mm offset


• Shown with Bone style outer support arm

• More Support Arm Designs to choose from available


Fitment: 94-06 Softail , Unit: Kit , Qty.: 1

COLOR DESCRIPTION OFFSET DUAL BELT SINGLE BELT







Aluminium Bobber Base Plate Stock 932540 932520







Aluminium Classic Base Plate Stock 932660 932640

Matte Black Powder Coated Bobber Base Plate 20 mm 932531 932511






Matte Black Powder Coated Bobber Base Plate Stock 932530 932510

Matte Black Powder Coated Classic Base Plate 20 mm 932651 932631






Matte Black Powder Coated Classic Base Plate Stock 932650 932630

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.11

EDITION 51

Order your RWT Power Belt Drive System by selecting the configuration that fits your

vehicle and preferences below. Please sign the order form and return it to your sales

representative to finalize your purchase.

Customer No._____________

Model: ____________________________________________ Year_______

M8: q Twin Cam 96 CUI: q EVO/Twin Cam 88 CUI: q

Offset (mm):

M8 models: Stock q 20,5 q

Twin Cam/EVO models: Stock q 20 q 25 q 30 q 35 q 40 q 45

Dual Belt: q

Single Belt q

Support Arm: Classic q Bobber q Bone q Milled q Black q Alu q

Base Plate: Classic q Bobber q Black q Alu q

Clutch Hub Cover: Triangle q Round q Drop q Black q Alu q

Previous Modifications made on your bike regaring Engine/Frame/Swingarm please describe below:

12

RWT Power Belts cannot be canceled once an order has been placed. The order form must be

completed in its entirety. Please double-check your information to avoid ordering errors. RWT

Power Belts are not kept in stock; they are custom-made to your specific requirements. The

customer is responsible for accurately measuring the offset based on the selected swingarm

configuration, wheel width, and drive pulley. The order form is only valid with the customer’s

signature and official stamp.

Customer Signature/Stamp Custom Chrome Sales-Rep.

12.12

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.13

EDITION 51

BDL Wide-Belt Primary Drives for Kick Start

Big Twins

The 2" and 3"-wide pulleys and clutch hubs are cast from 356-T6

aluminum and machined in BDL’s own foundry and machining

operation. These kits use the stock clutch hub and clutch, and

include 76-tooth clutch basket and 47-tooth engine pulleys,

8mm-pitch belt, and ‘Big Fix’ clutch hub roller bearings.

42534 3"-wide kit for Big Twins with splined shaft from 55-E84

42532 2"-wide kit for Big Twins with splined shaft from 55-E84

BDL 11 mm Primary Belt Drive Kits

1-1/2"-wide, 11 mm belt kit. For precision belt adjustment,

kits for aluminum-primary Big Twins include a BDL idler that

makes sure belt tension is correct (tin primary models use tranny

adjustment for correct belt tension). All kits use 31-tooth engine

pulleys and 47-tooth clutch pulleys.

42589 Fits 5-speed models with electric start from 80-E84

42588 Fits 4-speed models with electric start from 65-E84

42587 Fits splined shaft 4-speed kick start models from 65-E84

42586 Fits splined shaft 4-speed kick start models from 55-64

42585 Fits tapered shaft 4-speed kick start models from 36-54

BDL 8mm Primary Belt Drive Kits for 4-Speed

Models

The 8mm belt pitch has been used for years on primary drives and

the 1-1/2"-wide kit is considered by many to provide the best allaround

combination for dependable operation. Kits include front

pulley, rear clutch and hub/pulley . Designed for use with existing

clutch hub and clutch.

1242524 40/60-tooth pulleys for electric start models from 65-78

42525 41/61-tooth pulleys for electric start models from 80-E84

42526 Same as CC #42525 but specifically for models with factory

rear belt drive and belt drive inner primary

42527 39/62-tooth pulleys for kick start models with tapered

engine shaft from 36-54

42528 39/62-tooth pulleys for kick start models with splined





engine shaft from 79-E84

BDL 8 mm ’Bolt-In’ Belt Drive Kits

Engineered to handle the most brutal torque and horsepower

demands. Requires no primary case modifications to install.

Features a cylindrical-shaped, replaceable clutch dog capable of

withstanding 1200 foot pounds of torque. BDL’s steel hub design

moves the clutch basket inward, eliminating unnecessary weight

hanging from the mainshaft. Barnett Kevlar® clutch provides

70% greater surface area than stock for maximum hook-up.

Complete kit includes front and rear pulleys, clutch, and a sealed

clutch hub bearing.

42520 Fits 90-06 Softail and 91-05 Dyna Glide models

42518 Fits Softail models from 86-89

42521 Fits 4-speed Shovelhead models with chain rear drive

from 70-E84

42674 Fits 4-speed Shovelhead models with belt rear drive

from 80-E84


Company.

12.14

APPAREL

8mm

11mm

13.8mm

14mm

SEATS &

TOURING

8mm Gates HTD Rubber

Primary Belts

43032 'ST',1-1/2"-wide, 132-

teeth. Fits all Karata

HTD belt drives for

Big Twins with closed

primaries, and kick

or electric start from

36-E84. Also re-places

belt #30853-1-ST.

Replacement belt for

CC belt drive #42524

43033 1-1/2"-wide (Bullseye)

belt, 132-teeth. Fits

all Karata HTD belt

drives with tin primaries,

and replaces

belt #30853-2-BE for

Big Twins with closed

primary, and kick or

electric start from

36-E84. Also replaces

Phase III Bullseye

belt. Replacement

belt for CC belt drive

kits #42525, 42526,

42527, 42528,

42529 and 42530

(+.050")

43034 1-1/2"-wide, 144-

teeth. Replaces belt

#37144-1 for Big

Twins from 36-E84

with open or tin

primaries, and 47/76-

tooth pulleys. Also

replaces Phase III

applications

42514 1-5/8"-wide, 141-

teeth. Fits CC belt

drive kit #42509

42511 1-3/4"-wide, 132-

teeth

42512 1-3/4"-wide, 141-

teeth

43035 2"-wide, 144-teeth.

Replaces #37144-2

belt for Big Twins

from 36-E84 with

open primaries and

47/76-tooth pulleys.

42515 3"-wide, 141-teeth.

Fits CC belt drive kits

#42536, 42537 and

42542

43036 3"-wide, 144-teeth.

Fits all Karata HTD

belt drives for Big

Twins from 36-E84

with open primaries.

Also replaces

belt #37144-3 and

Phase III applications.

Replacement belt

for CC belt drive kits

#42533 and 42534

070970 135 tooth. Fits Brute

IV on FXR and FLT

models from 90-06

Dayco ‘Panther’ 3" Primary

Belts

Fit 3"-wide, 8 mm open belt

drives in racing applications

ONLY.

42755 144-teeth


Primary Belts

42517 1-1/2"-wide, 92-teeth.

Fits CC belt drive kit

#42589

43037 1-1/2"-wide, 96-teeth.

Replaces belt #30884

for Big Twins from

36-E84 with open or

closed primaries, kick

or electric start, and

either 29/44-tooth or

28/44-tooth pulley

combinations

43038 1-1/2"-wide, 99-teeth.

Replaces #1185 belt

for Big Twins from

36-E84 with open or

closed primaries, kick

or electric start, newer-style

combinations

with a 31/47-tooth

pulley combination.

Replacement belt

for CC belt drive kits

#42585, 42586,

42587, and 42588

42874

13.8mm Gates HTD Poly

Chain Primary Belts

43041 1-1/2"-wide,

78-teeth. Fits all

Karata HTD belt

drives for Big Twins

from 36-E84 with

4-speed trans-mission,

open or closed

primaries, and kick or

electric start



Primary Belts

43039 1 1/2"-wide, 78-teeth.

Replaces #38078

belt for all Big Twin

applications with a

24/37-tooth pulley

combination using

the Primo idler system

Reinforced Primary

Drive Belts by BDL

A selection of primary drive

belts to fit BDL ‘Bolt-In’ and

Primo ‘Brute III’ belt drive kits.

Reinforced with Kevlar®.

42873 Primary belt 8 mm x

42mm, 130-teeth for

rubber-mount applications

(except Dyna

Glide models). Fits CC

belt drive kits #42670,

42671, 42672, 42673

and Primo Brute III

belt drives for FXR,

FLT, FLHT, FLHS and

Road King models

with 68-tooth rear

and 48-tooth front

pulleys

42874 Primary belt 8,07 mm

x 41mm, 138-teeth

for Softail and Dyna

Glide applications.

Fits CC belt drive

kits #42518, 42519,

42520, 42674 and

Primo Brute III belt

drives for Softail and

Dyna Glide models

with 68-tooth rear

and 45-tooth front

pulleys.

42875 38mm-wide, 8mm,

138-teeth. Fits CC belt

drive kit #42521 with

68-tooth rear and

45-tooth front pulleys

Gates HTD Replacement Primary Drive Belts

A wide selection of replacement primary drive belts to fit most belt drive units on the market

today. All belts, whether HTD Rubber belts or HTD Poly Chain belts, are manufactured by the Gates

Rubber Company. All CC replacement belts are listed showing their pitch, construction, width,

number of teeth, and their most common applications.

HTD and Poly Chain are registered trademarks of the Gates Rubber

Company. Note: The belts offered for sale on this page have no warranty

whatsoever.

DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

12.15

EDITION 51

12

12.16

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

BDL Primary Pulleys and Accessories

By controlling the entire manufacturing process from design to casting to finish

machining, BDL provides consistent high-quality products. Pulleys are cast from 356T6

aluminum in their own foundry, and finished in their own machining center so that you

know that every pulley will be exactly what you need to transmit all that thundering

power to the road.

Pulleys for Big Twins

42548 Front 39-tooth tapered engine

shaft, 1-1/2" 8mm belt

42549 Front 39-tooth splined engine











shaft, 2" 8mm belt


shaft, 2" 8mm belt


shaft, 3" 8mm belt


shaft, 3" 8mm belt

42569 Rear 76-tooth kick start, 2" 8mm

belt

42570 Rear 76-tooth kick start, 3" 8mm

belt

Pulley Offset Inserts with Nuts (only

Evo and TC)

For wide tire applications choose

appropriate offset insert.

42866 Pulley ONLY for Softail models

42868 .25” offset insert (*not applicable

for TF-1000/2000)

42869 .50” offset insert (*not applicable

for TF-1000/2000)

42870 .75” offset insert

42871 1.00” offset insert





Primary Spacers (only Evo and 99-06

Twin Cam, except 06 Dyna)

For wide tire applications choose appropriate

primary spacer.

612230 .25” primary spacer



612233 1.00” primary spacer



Accessories

Starter Upgrade Kit for BDL

Applications

Includes a 66-tooth starter ring gear

and a 9-tooth starter gear. Permits you

to upgrade your 94-05 Big Twin to this

heavy-duty (early-style) setup.

42698 Fits Big Twins 94-06 (except 06

Dyna)

42699 9-tooth starter pinion gear only

Idler Bearing Kit

42608 Fits 11mm belt drive units

Polished Aluminum Open Belt Drive

Pulley Cover Set

Polished and undrilled. Installation

requires drilling the pulleys and covers, or

using an adhesive to attach the covers.

42648 Fits 72-tooth/47-tooth pulleys

42846 Fits CC #42508 for Shovelheads

Belt Guides

42609 Front pulley inner belt guide for

8 mm and 11 mm drives

42610 Front pulley outer belt guide for

8 mm and 11 mm drives

Starter Ring Gears for BDL Belt Drives

42582 Fits Big Twins 65-E84 (for CC#

42524, 42525, 42526, 42588,

42589)

42583 Fits Big Twins 85-93 (for all BDL

belt drives, open or closed, with

BDL clutch)

Billet Aluminum Rear Belt Pulley

Spacers

For offset belt and wide rear tire

applications.

42693 .500”-thick

42694 .750”-thick

42695 .937”-thick

42697 1.250”-thick

Ring Gear Lock Tool by BDL

For use on all BDL open belt drives. Once

the drive pulleys have been properly

installed and aligned this tool is used

to hold the pulleys and hubs in place

while they are torqued down. Works

best in conjunction with the CLT-100 (CC#

612434). Sold each.

612435 Ring gear lock tool

699608

699609

Replacement Belt Drive

Clutch Kits by Alto Products

Replacement clutch kits for the leading

manufacturer’s of belt drive units. Made

in USA.

Replacement Kit for BDL Belt Drives

This kit is reinforced with Aramid and

comes complete with friction and drive

plates.

699608 Complete kit

Replacement Kit for Primo Belt

Drives

This kit features Alto’s Red Eagle friction

material. Complete with friction and

drive plates.

699609 Complete kit

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.17

12

EDITION 51

BDL Parts and

Accessories

This page has a variety

of accessories and

replacement parts for the BDL primary

belt and chain drive kits sold by Custom

Chrome.

Replacement Parts for ‘Bolt In’ 8mm

Primary Belt Drive Kits

Offset kit Front Pulley (no insert)

42893 Fits CC #’s 42518, 42519, 42520

Front Belt Drive Pulleys and Guides

42881 45 tooth for Softail and 4-speed

Shovelhead models

42882 48 tooth for 5-speed Shovelhead

and FXR models

42883 Inner belt guide for CC #42881

42884 Outer belt guide for CC #42881

Clutch Baskets

Include basket with clutch dogs, bearing

and starter ring gear.

42885 Fits Softail, Dyna Glide and FXR

models with 66-tooth ring gears

from 86-05 (CC #’s 42518, 42519,

42520, 42670, 42671, 42674)

Clutch Hubs

42604 Clutch hub for splined

mainshafts from 90-06 Big Twin

(except 06 Dyna)

42605 Clutch hub for tapered

mainshafts from 86-89

42607 Clutch hub for Shovelheads from

65-84652760 Clutch hub for CC #

’s 42579, 642646, 642648

Round Clutch Dog Sets

Sold in packs of 12.

42886 Fits Softail, FXR and 5-speed

Shovelhead models

42887 Fits 4-speed Shovelhead models

Mainshaft Clutch Hub Nut

Pressure Plate Components

42598 Pressure plate for Big Twins from

84-99

42599 6 Shoulder bolts for CC #42598

42606 Clutch springs for Big Twins from

84-13 (set of 6)

42842 Clutch adjusting rod 29/16"

long. Used with all BDL belt

drives both open style and

closed primary style without ball

bearing clutch

Miscellaneous Parts

42632 C-clip for backside of clutch hub

42633 2.44" C-clip for hub bearing

42634 Kevlar® clutch plate, 1-sided

42635 Kevlar® clutch plate, 2-sided

42636 Notched steel drive plate

42637 Splined steel drive plate

42643 ‘Round dog’ steel drive plate

42638 40/62mm double row basket

hub bearing

42639 Sealed inner primary bearing for

Big Twins from 85-05

42600 Primary seal for Big Twins from

86-05

adjustable clutch rods

42641 Steel step washer for Evolution

Big Twin models

42593 Washer for splined engine shaft

42597 Flat hex splined shaft engine nut

Replacement Parts for 3" Belt Drive

Kits with Billet Motor Plates

Polished Aluminum Motor Plates

ONLY

42850 Fits Softail models (includes

bearing)

Polished Billet Starter Housings

42854 Fits BDL Evolution style motor

plates

Polished Aluminum Side Plates

42856 Fits Softail and Dyna Glide

models

Motor Plate Mainshaft Bearing and

Clip

42862 Fits Evolution models

42863 Fits Shovelhead models

42864 C-Clip bearing retainer

Starter Pinion Gears

696639 Fits 5-speed Softail, Dyna Glide

and FXR models +1’’

42623 Fits 5-speed Softail, Dyna Glide

and FXR models

42865 Fits Shovelhead models

Hardware Mounting Kits

For mounting 3" open belt drive

kits. Includes stand offs, engine and

transmission mounting hardware.

42859 Fits Softail and FXR models

Replacement Parts for BDL Chain

Primary Kits

Clutch Pack Kits

42837 Kevlar® clutch plates (set of 7)

42838 Steel drive plates (set of 8)

42839 Clutch pressure plate

Clutch Hubs and Nuts

42830 Fits 36-84 taper shaft

42832 Fits 90-06 (except 06 Dyna)

splined shaft

42843 Clutch hub nut

Step Washer

42833 Fits splined shaft clutch hubs

Shoulder Bolts

42840 Fits CC #42839 (set of 9)

Clutch Springs

42841 Fits CC #42840 shoulder bolts

and #42839 pressure plate (set

of 9)

Clutch Adjusting Screw and Nut

42842 Clutch adjusting rod 29/16"

long. Used with all BDL belt

drives both open style and

closed primary style without ball

bearing clutch

C-Clips

42834 Fits clutch hub

42835 Fits backside clutch hubs

42836 Fits step washer

Miscellaneous Parts

42593 Washer for splined engine shaft

42597 Flat hex splined shaft engine nut

DuPont and Kevlar® are trademarks or registered

trademarks of E.I. du Pont de Nemours and Company.

12.18

BDL Retro-Fit Clutch for 3"

Primary Belt Drives

This complete clutch package features

BDL’s advanced design that moves weight

in-board of the bearing to eliminate

gyroscopic-induced vibration in the

primary drive. Complete with Kevlar®

clutch, polished aluminum pressure plate

with springs, shoulder bolts, clutch basket,

steel clutch hub, double sealed bearing

and all hardware. It is designed to be

used with existing 3" front pulley and

8mm-pitch belts on 36-early 84 kick start

models.

42543 Complete kit

Ball Bearing Lock Up Clutches

from BDL

BDL’s new patent pending Ball Bearing

Lock Up clutch is now standard equipment

with all SS2 2" belt drives and RevTech 3"

open belt drives. This ball bearing ramp

style clutch set up reduces clutch slips no

matter what displacement motor you

own. It’s a must for big inch motors.

642641 For all BDL open belt drives

(except TF)

642642 For all Primo belt drives

642643 For stock clutch assemblies from

98-07

BDL Clutch Lock Up Tool

For use on all of our belt drive units which

have the BDL round clutch dogs. This

clutch lock-up tool is designed to help

you properly torque the clutch basket &

hub assembly to the main shaft of your

transmission without the use of an Impact

wrench that can damage the hub, basket

or other components of your new belt

drive.

612434 Clutch lock tool for BDL drives

APPAREL

688306

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

688639

LIGHTING

Cast Late-Style Inner Primary Housings for

Softail Models

Precision-machined cast aluminum inner primary housings are

polished smooth and chrome-plated for a brilliant finish. Also

available in black wrinkle finish.

Fit all Softail models from 89-93

28821 Chrome

Fit all Softail models from 94-06

688180 Chrome inner primary 94-06

688181 Black wrinkle inner primary 94-06

Replacement Parts

58685 Starter mounting kit for Big Twins from 89-99

92200 Starter shaft bushing for Big Twins from 89-93 (repl.

OEM 33445-89)

92201 Starter shaft bushing for inner primary on Big Twins

from 94-06 (except 06 Dyna) (repl. OEM 33445-94)

92203 Primary bearing (repl. OEM 9135)

28823 Retaining ring for primary bearing (repl. OEM 60678-85)

10 pack

688563 Primary bearing and retainer kit (one bearing two

retainers)

688564 Starter shaft bushing 94-06 Big Twins (exc. 06 Dyna)

OEM 33445-94A

688565 Starter shaft bushing 89-93 Big Twins OEM 33445-89

688638

Late-Style Outer Primary Covers

Replace your scratched or peeling OEM chrome cover, or upgrade

from the plain aluminum to one of these beautifully chromed or

black covers.

688638 Chrome Outer primary cover for 07-17 Softail and 06-17

FXDWG models

688306 Black Wrinkle Outer primary cover for 07-17 Softail and

06-17 FXDWG models

688639 Chrome Outer primary cover for 06-17 Dyna (excl.

FXDWG)

688307 Black Wrinkle Outer primary cover for 06-17 Dyna (excl.

FXDWG)

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

28860

FORKS &

SHOCKS

SHEETMETAL

Outer Primary Covers

Die-cast aluminum outer primary covers include starter shaft bushing and feature reinforcing ribs for increased strength and rigidity.

Comes with chrome hardware

28860 Chrome 5-hole cover for Softails 99-06 and Dyna Glide models from 99-05 (repl. OEM 60543-99)

28820 Chrome 3-hole cover for Softail and Dyna Glide models from 94-98 (repl. OEM 60543-95)

28077 Chrome 3-hole cover for Softail and Dyna Glide models from 89-93 (repl. OEM 60543-89)

Replacement Parts

92214 Starter shaft bushing for outer primary on Big Twins from 94-06 (except 06 Dyna) (repl. OEM 33446-94)


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

12.19

EDITION 51

688053

28065

Sportster Primary Cover XL 94-03 Models

895018 Chrome

895019 Black

25232 Replaces OEM 34761-94 Derby Cover

12

12.20

Chrome or Black Cast Early-Style Outer

Primary Covers

Reinforced outer primary covers for 4-speed Big Twin and

5-speed Softail models from 70-88. The starter shaft support

bearing is installed and additional thrust washers are provided

for belt and chain drive. Ready to mount on 8-hole primaries

with flat boss for ninth hole. FL cover has floorboard mounting

tab. Chrome hardware included.

28065 Chrome primary cover fits 4-speed FX and 5-speed

Softail models from 71-88 (small dowel pins)

688053 Black primary cover fits 4-speed FX and 5-speed Softail

models from 71-88 (small dowel pins)

28066 Chrome primary cover fits 4-speed FL models from 70-84

with chain final drive

688054 Black primary cover fits 4-speed FL models from 70-84

with chain final drive

250725 Chrome primary cover fits 5-speed Softail models from

86-88 (repl. OEM 60507-86A). Cover is machined for

O-ring derby cover seal and large diameter alignment

pins

Primary Cover Mounting Parts

Replacement parts including a set of 15 chrome sockethead

screws to mount primary cover, derby cover and inspection plate

on 4-speed Big Twins from 65-E84.

28817 Chrome screw set

28818 Thrust washer, starter drive for all 4-speed Big Twins

from 65-80 and Sportster models from 67-80 (replaces

OEM 31502-65). Sold in pairs.

28074 Needle bearing for Sportster models from 67-80, and

FX and FL chain drive models from 65-84 (replaces OEM

9063)

Primary Chain Housing Top Screw

Fits inner primary on 4-speed Big Twins from 65-86.

28811 Pivot screw, gear shift lever for inner primary cover on

all 4-speed Big Twins from 65-86 (replaces OEM 31478-

65A). Sold in 5 pack. Top screw.

605604

605606 605605

Chrome Late Sportster Covers for Primary

Dress up your late Sportster with this beautifully chromed outer

primary cover or accentuate your black or natural finish OEM

cover with one of our derby or inspection covers.

605604 Outer primary cover 04-05 XL

605607 Outer primary cover 06-20 XL

605605 Inspection cover 04-20 XL

605606 Derby cover 04-20 XL

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

Primary Covers “Trackster” for Sportster by EMD

Factory Racer inspired, this primary cover will offer a pure Vintage & Racing look to your Sportster! Aluminum cast with CNC

machined gasket surface. Sportster 04-05 models needs the shifter sleeve kit CC # 655793 and 06-16 Models Use Original Sleeve.

607199 04-20 Sportster, raw

607200 For Sportster 04-20, black out

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

911762 911764

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

911765 911765

FRAMES

Ribbed Primary Cover

• Ribbed Design directly inspired by the finned primary covers from the golden age of Choppers

• Replaces the OEM primary cover and will radically change the look of the left engine side

• Die cast aluminum with CNC milled gasket surface

• Dimensions and tolerances identical to your OEM hardware

• Seals not included (available separately)

Fitment: 18-24 Softail , Material: Cast Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE BLACK BLACK CUT RAW SEMI POLISHED

18-24 Softail For use with forward controls 911768 911769 911766 911767

18-24 Softail For use with mid controls 911764 911765 911762 911763

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.21

EDITION 51

Primary Covers “Ribsters” for Sportster

models

Primary”Ribsters”cover for Sportster models. Aluminum cast

with CNC machined gasket surface. Models from 91 to 93 needs

Müller clutch kit CCE # 687009. Sportster 04-05 models needs

shifter sleeve kit CC # 655793

618479 For Sportster 91-03, 5-Speed models , raw

618480 For Sportster 91-03, 5-Speed models, black cut

618481 For Sportster 04-20, raw

618482 For Sportster 04-20, black cut

Primary Covers “Snatch” for Softail & Dyna

Twin Cam

A touch of class for your bike! The Snatch covers are available in

raw or black-cut finish. For Softail models with forward controls

and Dyna with mid-controls.

618486 For Softail Twin Cam models 07-17, raw

618487 For Softail Twin Cam models 07-17, black cut

618488 For Dyna Twin Cam models 06-17 with mid-controls,

raw

618489 Primary cover Snatch for Dyna TC 06-17 with Mid-

Control, Black Cut

12

910654 910655

910656 910657

Billy Boy Primary Cover

• Directly inspired by the sheet metal primary cover from the famous Easy Riders Billy‘s Bike

• Will radically change the look of the left engine side

• Gaskets not supplied (available separately)

• Softail 94-06 and Dyna 94-05 models need the shifter sleeve kit CC # 655794

Material: Cast Aluminium , Unit: Each , Qty.: 1

PART# FITMENT FITMENT NOTE COLOR

618498 89-06 Softail Raw

618499 89-06 Softail Black

618500 91-05 Dyna Raw

655750 91-05 Dyna Black


910654 07-17 Softail With Forward Controls Raw

910655 07-17 Softail With Forward Controls Black

910656 06-17 Dyna With Mid Controls Raw

910657 06-17 Dyna With Mid Controls Black

12.22

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

Ribbed Primary Cover for Touring

• Ribbed design directly inspired by the finned primary covers

from the golden age of choppers

• Our primary cover EMD / ribsters snatch install in place of your

OEM touring primary cover and will radically change the look

of the left side of your engine

• Manufactured in die cast aluminum, CNC milled gasket surface

• Dimensions and tolerances identical to the OEM hardware

• Seals not included (available separately)

Fitment: 17-24 Touring, 17-24 Trike , Material: Cast

Aluminium , Unit: Each , Qty.: 1

PART# COLOR

920506 Black

920508 Black Cut

920507 Semi Polished

920505 Raw

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

Alternator Cover

Use on alternator Big Twin motors to protect your alternator and help cool it by acting as a heat sink. Has mounting lug for our belt shroud built in.

Made of aluminum casting and highly recommended for all open belt drive installations. Sold each.

42039 Polished Alternator Cover

688052 Black Alternator Cover

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

Clutch Domes

Highly-polished parts provide a finished, custom look to open belt drives, and protection from spinning parts. Fits Big Twins 36-84 (except

those with diaphragm clutches).

42042 Fits 5-finger clutch hubs (shown)

42038 Fits 3-finger clutch hubs


LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

12.23

EDITION 51

28281

12266

28286

Covers for ‘Tin’ Style Outer Primary Covers

Enhance the look of your ‘tin’ style primary with these heavygauge

covers.

12266 Chrome dimpled inspection cover. Fits Big Twin models

36-64 (repl. OEM 60573-36).

12267 Chrome derby cover. Fits Big Twins 36–64 (repl. OEM

60555-36).

651315 Derby and inspection cover screws

48231

48263

12

Steel ‘Tin-Style’ Primaries for Kickstart Big

Twins

Chrome-plated primaries for 4-speed Big Twins are accurate

reproductions for Original Equipment applications. Mounting

hardware included. 55-69 inner primaries can only be used if

aluminum primary and electric starter is removed.

28286 Chrome 36-54

28287 Chrome 55-69

Inner Covers

28281 Chrome 36-54

28280 Chrome 55-64

651314 Chrome 65-69

651316 Inner Primary Screws (10pk)

28287

28280

Chrome Inner Primary Cover Trims by

Kuryakyn

These easily-installed chrome accents give the look of a fully

chrome-plated inner primary for a fraction of the cost. Because

of the die-cast construction, a much more precise fit, and a

classier three-dimensional look results. Nicely formed edges

give these covers a creamy, flowing appearance that enhances

the entire primary area. Four mounting points permit easy

installation in minutes and ensure secure, quiet operation.

48231 Fits Softail models from 89-99 (except FLSTS models, or

bikes that have been lowered)

600485 Fits Softail models from 00-06 (will work on lowered

bikes)

48263 Fits Touring models 90-06

Sealed Bearing for Inner Primaries

893467 For inner primaries on Big Twins EVO 87-99 5-speed

models

12.24

APPAREL

SEATS &

TOURING

Nut For Serrated Plate by

Rivera

893473 For inner primaries on Big Twins

36- Early 84

FOOT

CONTROLS

Adjuster Rod Only by Rivera

893475 For 41-84 4-speed models

HAND

CONTROLS

LIGHTING

Mainshaft Bearing Support

Re-establishes mainshaft bearing

support when cast inner primary cover is

removed in open belt drive applications.

Cast aluminum construction with

reinforcement ribs. Fits Big Twins (except

models with diaphragm clutch) 66-84.

060689 Mainshaft support with bearings

20015 Bearing (repl. OEM 9061) sold

each

893468 Repl. bearing for support plate

060689

Rivera Idler Bearing Kit

893472 Idler bearing with small plate Big

Twin 36- early 84

Large Serrated Plate For Inner

Primary

893474 For Big Twins 36- early 84

Inner Primary Bearing Upgrade

Kit

If you are using a big inch motor or

running an open belt, this bearing upgrade

is a must. The kit comes with a double row

angular contact bearing, seal and snap

ring.

612400 Fits 5 speed Big Twins 90-06

(except 06 Dyna)

Shaft Extension by Rivera

893494 For Big Twins 85-06 except Dyna

06, Softail models 85-86 (repl.

OEM 40266-85)

Derby Cover Spacers by Rivera

Primo

On some models it may be necessary to

space out the derby cover if it appears

that the TPP weights may hit the derby.

For those instances we have introduced

two spacer kits for either 3 or 5 hole

derby covers.

893519 3 holes with gasket for Big Twins

70-97

893520 5 holes with gasket for Big Twin

98-17 (except 15 Touring Low

models, 16 Touring models)

893502 893499

893504

893500

893505

893506

Sprocket Shaft Extensions by

Rivera

For Big Twins 85-06 (except Dyna models

06)

893499 1 1/4”

893500 1 1/17”

Sprocket Shaft Nuts for Big Twins

893502 1/2”

893504 1 1/4”

893505 1 1/17”

893506 1 1/2”

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

Lock Nut by Rivera

893476 For Big Twins 41-early 84 (for

adjuster bolt)

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.25

EDITION 51

Compensating Sprocket

Nut

893493 Nut Big Twin 91- Except

Dyna Models 06- (repl.

OEM 40392-91)

HD Inner Primary

Bearing Kit

• 58x2 internal snap ring x 1

• Needle Bearing Shaft x 1

• Double Lip Seal x 1

• Needle Bearing x 1

Part#: 919350 , Fitment:

08-17 Dyna, 08-24 Softail,

08-24 Touring, 09-24 Trike

, OEM #: 9231 , Unit: Kit ,

Qty.: 1

12

Inner Primary

Bearing and Seal

Kit

• Contents:

• Oil Seal, selector shaft, inner

primary cover

• Oil Seal, inner primary

cover, double-lipped

• Snap ring (58x2)

• Inner ring (25x32.1x25.4)

• Bearing (32x52x15)

Part#: 921731 , Fitment: 89-

94 FX Model, 91-07 Dyna,

89-07 Softail, 89-07 Touring

, Unit: Kit , Qty.: 1

Magnetic Drain Plug

and Washer

For Original Equipment or CC inner

primaries. Fits 4-speed Big Twins

65-86.

28812 Replaces OEM 60348-

65A (bag of 5)

Inner Primary Bearing

Upgrade Kit

If you are using a big inch

motor or running an open

belt, this bearing upgrade is

a must. The kit comes with a

double row angular contact

bearing, seal and snap ring.

612400 Fits 5 speed Big Twins

90-06 (except 06

Dyna)

25308

25333

Inner Primary

Accessories

25308 Mainshaft seal (repl.

OEM 12018) pack of

10

54073 Mainshaft seal (repl.

OEM 12052) pack of

5

25333 Shifter shaft seal

(repl. OEM 60641-74)

pack of 5

54007 Alternator O-ring

(repl. OEM 11147)

pack of 10

Premium Inner

Primary Mainshaft

Bearing

Fits 4-speed Big Twins 65-E84.

High quality ‘sealed-type’

replacement bearing has builtin

lubrication and side seals to

keep dirt and grime out.

20015 Bearing (repl. OEM

9061) sold each

Colony Chrome Hex

Head Filler Plugs and

Caps

Designed for easy installation

and removal with a standard

15/16" wrench.

36061 Primary filler cap

for Sportster models

from 71-76

36060 Clutch adjusting hole

cap for Sportster

models from 71-76

36059 Primary filler cap or

clutch adjusting hole

cap for Sportster

models from 77-85

(replaces OEM 34742-

77B) sold each

36252 Primary filler cap or

clutch adjusting hole

cap for Sportster

models from 86-90

(two required per

motor) sold each

Timing and Transmission

Filler Plugs

Fits Big Twin and Sportster

timing holes and oil tanks with

a 5/8"-18 thread. Also fits the

transmission filler hole on all

45s thru 1940.

36186 Chrome (not shown)

Sprocket Lock-Nut Kit

CCE sprocket lock nuts are

the cure for your loose front

pulley or front sprocket nut.

These high tensile strength

nuts have a built-in lock plate

and can also be secured in

several additional places by

an easy drilling and tapping

operation.

Unit: Kit , Qty.: 1

PART#

FITMENT

919720 06-17 Dyna, 07-

24 Softail, 07-24

Touring, 09-24 Trike

919719 93-20 Sportster, 93-

94 FX Model, 93-05

Dyna, 93-06 Softail,

93-06 Touring, 97-02

M2, 97-98 S1, 97-99

S3, 99-02 X1, 03-10

XB

250750 250751

Primary Case Plugs

for Sportster Models

Chrome oil fill and clutch

adjustment hole plugs for

Sportster models from 71-90.

Available with stock type

slotted or custom hex heads.

Sold each.

Slotted Plugs

250751 Oil fill and clutch

adjusting hole plug (1

3/8"-12) for Sportster

models from 77-85

(repl. OEM 34742-

77A)

250750 Oil fill and clutch

adjusting hole plug

for Sportster models

from 86-90 (repl.

OEMs 25465-86,

34742-86)

Gasket Kit Crankcase

Saver by James

Gaskets

667085 RCM Gasket & Lock

Tabs, Evo/Twin


Saver by James

Gaskets

667086 FOAMET Gasket &

Lock Tabs, Twin Cam

12.26

APPAREL

SEATS &

TOURING


Saver by James

Gaskets

667088 FOAMET Gasket

& Lock Tabs,

Shovelhead

6 Speed Inner Primary

G5 Bolt and Seal Kit

Part#: 919697 , Fitment:

06-17 Dyna, 07-24 Softail,

07-16 Touring, 09-16 Trike ,

OEM #: 786A , Unit: Pack ,

Qty.: 5

Steel Offset Transmission Mounting Plates

Permit you to put 5-speed transmissions for Softail models

in 4-speed rigid frames. Made from 3/16" steel plate and are

machined, not stamped. Offset versions are available for wide

tire applications. Made in the USA by Motorway.

632009 Stock with no offset

632011 1/2" offset

632014 1 1/4" offset

Note: This conversion will require you to update your 4-speed primary and starter to those

fitted to 5-speed Softail models. Additionally, if you use a 86-89 Softail transmission, you will

need to use a 86-89 clutch hub, and if you use a 90-99 transmission, you will need to use a

matching clutch hub.

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE


Saver by James

Gaskets

667087 RCM Gasket & Lock

Tabs, Shovelhead

Primary Drive Lock

Tool

894889 With step fits all

models

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Gasket Kit by James

Gaskets

667109 Primary Inspection &

Clutch Derby Cover,

80-84 FLT, 82-84 FXR

Offset Transmission

Plates

These 1-inch offset mounting

plates for 5-speed Softail

transmissions, make assembly

of Wide Drive swingarm

or extra wide rigid-framed

customs a snap. The hot set-up

for building that extra-wide

ride.

17285 Chrome mounting

plate

17286 Raw steel mounting

plate

Transmission Offset Kit

CNC precision manufacturing from Germany easy to install. No

need for a longer main shaft or a longer clutch pushrod. 8 mm

offset for wheels up to 8,5“ wide.

619454 Rick’s offset kit 8 mm for 06-11 Dyna and 07-11 Softail

models

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

Seal Kit Starter

Housing & Shift Lever

by James Gaskets

667114 65-81, Shovelhead

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.27

EDITION 51

Chain Housing Drain Plug

These drain plugs are also available in oversize if the threads in the housing are defective.

Material: Steel , Unit: Each , Qty.: 1

PART# FITMENT COLOR DESCRIPTION OEM # THREAD

930450 65 Panhead, 66-84 FL Shovel, (except 80-84 FLT, 81-84 FLTC), 71-84 FX

Shovel, (except 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 FXRSDG), 91-00

Dyna, 93-00 Touring, 77-03 Sportster, 84-86 FXST

930451 65 Panhead, 66-84 FL Shovel, (except 80-84 FLT, 81-84 FLTC), 71-84 FX

Shovel, (except 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 FXRSDG), 91-00

Dyna, 93-00 Touring, 77-03 Sportster, 84-86 FXST

Zinc

Plated

930455 65 Panhead, 66-84 FL Shovel, 71-84 FX Shovel, 67-92 Sportster Zinc

Plated

60348-65 1/2“-20

UNF

Chrome 60346-65, 1/2“-20

60348-65A UNF

Oversized 9/16“-18

UNF

930456 65 Panhead, 66-84 FL Shovel, 71-84 FX Shovel, 67-92 Sportster Chrome Oversized 9/16“-18

UNF

12

Flute Standard Thread Re-Tapping Tool

Part#: 930437 , Fitment: 67-03 Sportster, 65 Panhead, 66-84

FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 91-98 Dyna,

84-99 Softail, 85-00 Touring , OEM #: 60348-65 , Unit: Each

, Qty.: 1

Magnetic Transmission, Primary and Engine Oil

Drain Plug

Available in standard size and oversize (use related thread retapping

tool).

Fitment: 99-17 Dyna, 00-24 Softail, 01-24 Touring, 09-24

Trike, 04-20 Sportster , OEM #: 60328-98 , Unit: Each , Qty.:

1

PART# COLOR DESCRIPTION THREAD

930431 Chrome 1/2“-20 UNF

930432 Zinc Plated 1/2“-20 UNF

930448 Chrome Oversized 9/16“-18 UNF

930449 Zinc Plated Oversized 9/16“-18 UNF

Magnetic Primary Drain Plug

Part#: 930459 , Fitment: 04-05 Dyna, 04-06 Softail , Color:

Zinc Plated , OEM #: 60391-04 , Material: Steel , Thread:

3/8“-24 UNF , Unit: Pack , Qty.: 1

12.28

APPAREL

899823, 899824

Inner Primary Bearing Race

Inner race for primary support roller bearing and inner primary

seal. Available for models with 5- and 6-speed transmissions.

Unit: Each , Qty.: 1

PART# FITMENT DESCRIPTION OEM #

899823 06-07 Dyna, 06-07

Softail, 06-07 Touring

899824 08-17 Dyna, 08-24

Softail, 08-24 Touring,

14-24 Trike

30528 85-94 FX Model, 91-05

Dyna, 85-06 Softail, 85-

06 Touring

For 5 and 6-Speed

Transmission Big

Twin 06-07

For 6-Speed

Transmission Big

Twin 08-up

For 5-Speed

Transmission Big

Twin

34091-06

34091-08

34091-85

92203 930856

Primary Support Roller Bearing

Primary support roller bearing. Available for models with 5- and

6-speed transmissions.


PART# FITMENT DESCRIPTION OEM #

92203 85-94 FX Model, For 5-Speed Big

91-05 Dyna, 84-06 Twin

Softail, 86-06

Touring

930856 06-17 Dyna, 07-24

Softail, 07-24

Touring, 09-24

Trike

For 6-Speed Big

Twin

9135

9231

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

Inner Primary Support Bearing Upgrade Kit

Kit includes dual row primary support bearing, oil seal (replaces OE# 12025), retaining ring (replaces OE# 60678-85).

Part#: 930857 , Fitment: 85-94 FX Model, 91-05 Dyna, 86-06 Softail, 85-06 Touring , Description: Including Oil Seal, Ret.-

ring , OEM #: 9135, 1252A, 60678-85 , Unit: Each , Qty.: 1

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.29

EDITION 51

Engine-to-Primary Spacers

These aluminum spacers permit the use of the latest extra-wide

rear tires with custom frame applications.

RAW FINISH

CHROME

17287 17282 1/4" offset

17288 17283 1/2" offset

Premium Engine Sprocket Compensator Kit

for Milwaukee EightPremium Engine Sprocket

Compensator Kit for Milwaukee Eight

Part#: 919723 , Fitment: 18-24 Softail, 17-24 Touring, 17-24

Trike , OEM #: 40100076 , Unit: Kit , Qty.: 1

Compensating Sprocket

Replace your worn out Original Equipment compensator

sprocket components with one of these Compensating Sprockets.

Material: Steel , Unit: Each , Qty.: 1

PART# FITMENT OEM #

14234 85-93 FX Model, 91-93 Dyna, 85-93


14242 94-05 Dyna, 94-06 Softail, 94-06

Touring

924541 06-11 Dyna, 07-11 Softail, 07-08

Touring

12218 70-84 FL Shovel, 71-84 FX Shovel,

12

85-86 FX Model, 84 Softail, 86

Touring



Touring



Touring

TEETH

TEETH

40269-85A 24

40308-94 25

40320-06 34

40280-70 22

40282-70 23

40275-70 24

17382

Motor Sprockets for

Big Twins

Tapered

Fit Big Twins from 36-54.

17382 23 tooth

17383 24 tooth

17384

18336 25 tooth

Splined

Fit Big Twins from 55-84.

17384 23 tooth

17385 24 tooth

18337 25 tooth

Chain Drive Compensator Sprocket


BDL’s patented chain drive sprockets with integrated

compensator.

PART# FITMENT OEM # TEETH TEETH

924954 06-17 Dyna, 07-17 Softail,

except 08 FXCW, 08-11

FXCWC, 14-17 FXSB, 13-

14 FXSBSE, 07-10 Touring

924952 91-93 Dyna, 84-93 Softail,

85-93 Touring

924953 94-05 Dyna, 94-06 Softail,

94-06 Touring

34

40275-83 24

40308-94 25

COMPENSATING SPROCKETS BY RIVERA

PART## TOOTH SIZE FITMENT

893483 25 1.4375” Softail 94-06 , Dyna

94-05

893487 24 1.000” Softail 90-93

893489 24 1.4375” Softail 90-93

893490 24 1.500” Softail 90-93

12.30

APPAREL

14246

20306

SEATS &

TOURING

FOOT

CONTROLS

12218

12112

12222

Compensating Sprocket Components

Restore your compensating sprocket to peak performance. Fit most Big Twins

with primary chain from 70-06.

Sliding Cams for Big Twins

12222 Fits most models from 70-83 (repl. OEM 40299-70)

12764 Fits all models from 85-06 (except 06 Dyna) (repl. OEM

40299-83A)

Sprocket Nut for Big Twins from 70-90

12112 Stock length (repl. OEM 40392-70)

14245 1" extended (repl. OEM 40392-70)

14246 1/2" extended (repl. OEM 40392-70)

Sprocket Nut for Big Twins from 91-06 (except 06 Dyna)

12078 Stock length (repl. OEM 40392-91)

14247 1" extended (repl. OEM 40392-91)

14248 1/2" extended (repl. OEM 40392-91)

Compensating Sprockets for Big Twins from Late 70-86

12218 22-tooth (repl. OEM 40280-70)

12232 23-tooth (repl. OEM 40282-70)

12233 24-tooth (repl. OEM 40275-70)

Compensating Sprockets for Big Twins from 85-05

14234 24-tooth for Softail models 91-93 and 5-speed rubber-mount

models from 85-90 (repl. OEM 40269-85A)

14242 25-tooth for all Big Twin models from 94-06 (except 06

Dyna) (repl. OEM 40308-94)

Sprocket Shaft Extensions

20306 Stock length for 4-speed Big Twins from late 70-83,

5-speed Big Twins from 80-E84 and Softail models from

84-90 (repl. OEM 40375-70)

14232 Stock length for Softail models from 91-06 and 5-speed

rubber-mount Big Twin models from 85-90 (repl. OEM

40266-85)

14244 1/2" extended for Big Twin models from 85-90 (repl.

OEM 40266-85)

14243 1" extended for Big Twin models from 85-90 (repl. OEM

40266-85)

Compensating Sprocket Assemblies

Replace your worn out Original Equipment unit with one of these

complete assemblies.

Complete Assemblies

Each of these assemblies includes the shaft extension, cover with

springs, sliding cam, engine nut and sprocket.

14241 25-tooth for all Big Twin models from 94-06 (except 06

Dyna)

14235 24-tooth for Softail models from 91-93

14238 24-tooth for Softail models from 85-90

14231 24-tooth for 5-speed rubber-mount models from 85-90

Cover Assemblies with Springs

Available for most models from 85-05

14233 Fits 5-speed rubber-mount models from 85-90 (repl. OEM

40267-85)

14240 Fits Softail models from 85-90 (repl. OEM 40384-83A)

14237 Fits all Big Twins from 91-06 (except 06 Dyna) (repl. OEM

40384-91)

070812 500610

25396

Custom Sprocket Nuts

Chrome acorn style sprocket shaft nuts for Big Twins and

Sportster. Sold each.

070812 Fits Big Twin models from 36-54 (11/16"-18)

070813 Fits Big Twin models without com-pensating sprocket

from 55-05 (7/8"-14)

070814 Fits Sportster models from 57-03 (3/4"-16)

Stock Type Motor Sprocket Nuts

500610 Fits Big Twin models from 30-54 (11/16"-18)

Sprocket Nut Lock Tabs

25396 Fits 4-speed Big Twins from 41-E83 (repl. OEM 35216-36)

pack of 10

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.31

EDITION 51

688839

612280

688550

12282

12297

612281

12281

688551

070183

17065

17069

070179

688552

17431

Primary Chain Adjusters and Parts

High-quality reproductions of their Original Equipment

counterparts designed for years of faithful service.

Primary Chain Adjuster Plate Kit

Includes inner and outer plates, and hardware, and replaces

OEMs 39992-65C, 39998-65, and 1783

17065 Fits all Big Twins from 65-00

Adjusting Shoes

12

Fit most models from 57-06. Sold each

612280 Fits Twin Cam 88 models from 01-06 (except 06 Dyna)

12282 Fits Big Twin 65-00 (repl. OEM 39976-65B)

688839 Fits Sportster models from 04-20

612281 Fits 5-speed Sportster models from 91-03

12297 Fits Sportster models from 77-90 (repl. OEM 39966-80)

070183 Adjuster lining kit for Sportster models from 58-76.

Includes lining and retainer (repl. OEMs 39978-58, 39979-

58A)

070179 Retainer ONLY for Sportster models from 58-76 (repl.

OEM 39979-58A)

12281 Fits Sportster 57-76 (repl. OEM 39978-58)

Adjusting Plate Components

Fit Original Equipment and Custom Chrome inner primaries on

Big Twin models from 65-00

17069 Inner chain tensioner (repl. OEM 39990-65)

17431 Tensioner bolt kit (repl. OEM 39992-65C)

17418 Bolt, adj. plat. screw (2614) 10PK

Complete Primary Chain Tensioner Kits

Replace those old tired worn parts with these quality

reproductions of the original chain tensioners. Available for most

Big Twin models.

688550 Chain tensioner kit 00-06 Big Twins (except 06 Dyna)

688551 Chain tensioner kit L84-99 Big Twins

688552 Chain tensioner kit 65-E84 Big Twins

Armored Attitude Chain Adjuster Assembly

An insurance policy for your motorcycle in the form of a manual

chain adjuster. The stock auto tensioning system is known to

overtighten the primary chain. This unit allows you to set the

chain to the proper slack when cold and be assured that the

adjustment will not change.

• 28% finer teeth spacing (compared to 2001-2006 chain

adjuster) for more accurate adjustments.

• Active Plate and Back Support Plate investment cast with 4130

Steel Chain shoe machined from Nylon 66

• Increases torque by 3.42 ft/lbs

• Reduces primary noise

• Help prevent damage to primary

• Improves motor bottom end and inner primary race bearing

durability

• Made in the U.S.A.

Part#: 925425 , Fitment: 06-17 Dyna, 07-17 Softail, 07-

24 Touring, (except 23 FLTRKSEANV, 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE) , OEM #: 39929-

06, 36500075A , Unit: Kit , Qty.: 1

12.32

APPAREL

SEATS &

TOURING

Primary Chain

These high-quality replacement primary chains from Twin Power

are superior to the O.E.M. parts. Our premium quality endless

chains offer you precision-ground side plates for smoother

operation. Their specifications and performance are designed to

be superior to O.E. chains. Made in Japan.


FOOT

CONTROLS

HAND

CONTROLS

33036

PART# FITMENT OEM #

LIGHTING

33039

919797 04-20 XL1200C, 04-08 XL1200R, 06-10 40147-04

XL1200L, 08-12 XL1200N, 10-20 XL1200X,

12-16 XL1200V, 13 XL1200C ANV, 13-16

XL1200CA, 13-17 XL1200CB, 14-18 XL1200T,

16-20 XL1200CX, 18 XL1200X ANX, 19-20

XL1200NS, 19-20 XL1200XS, 20 XL 1200T

919799 06-17 Dyna, 07-24 Softail 40036-06

919798 07-24 Touring, 09-24 Trike 40037-07

ELECTRICAL

EXHAUST

Motor Factory Primary Chains by Diamond

Premium quality, made in USA endless primary chains for Big

Twin and Sportster models.

33035 82-link double row chain for 4-speed Big Twins thru 86

and 91-05 Dyna and 84-06 Softail (repl. OEM 40007-36A)

33039 76-link double row chain for 5-speed Big Twins (except

Dyna Glide and Softail models) from 80-06 (repl. OEM

40037-79)

33036 94-link triple row chain for Sportster models from 57-03

(repl. OEM 40005-57)

919795 36-52 Flathead, 36-47 Knucklehead, 48-65

Panhead, 71-84 FX Shovel, 66-84 FL Shovel,

(except 80-84 FLT, 81-84 FLTC), 91-05 Dyna,

84-06 Softail

919796 57-20 Sportster except 04-20 XL1200, 08-13

XR1200 Models

919794 85-94 FX Model, 86-06 Touring, 80-84 FLT,

81-84 FLTC

40007-36B

40005-57A

40037-79A

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Motor Factory Primary Chains

Motor Factory chains are manufactured to withstand the

heavy-duty demands of the Harley-Davidson engine. These

competitively priced double and triple row chains will fit most

applications.

FORKS &

SHOCKS

17415 82-link double row chain for 4-speed Big Twins thru 86

and 91-05 Dyna Glide and Softail models from 84-06

(repl. OEM 40007-36A)

SHEETMETAL

17416 76-link double row chain for 5-speed Big Twins (except

Dyna Glide and Softail models) from 80-06 (repl. OEM

40037-79)

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.33

EDITION 51

New Custom Clutch Cover

• CNC machined aluminium with black anodized finish

• Bicolor design

• Sold each

Color: Black, Anodized , Description: 5-hole , Material:

Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE BLACK

ANODIZED

19-24 Softail, 18 FLSB 914846

99-17 Dyna, 99-18 Softail, Does not fit

(except 18 FLSB), 99-15 Touring, models with H-D

(except 15 FLHTKL, 15 FLHTCUL), Narrow Profile

09-15 Trike

Primary Covers

913092

New Custom Point Cover

• With Thunderbike Logo

• CNC-made from billet aluminum

Material: Aluminium , Unit: Each , Qty.: 1

FITMENT

18-24 Softail, 17-24

Touring, (except

23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24

FLTRX, 24 FLTRXSTSE),

17-24 Trike

99-17 Dyna, 00-17

Softail, 99-16 Touring,

09-16 Trike

DESCRIPTION BI-COLOR

ANODIZED

2-hole, with

Thunderbike-

Logo

3-hole, with

Thunderbike

Logo

913094

BLACK

ANODIZED

917035

12

FITMENT

652990

Cross Clutch Cover


• Bicolor design

• Sold each

Color: Bi-Color, Anodized , Material: Aluminium , Unit:

Each , Qty.: 1

FITMENT

NOTE


ANODIZED

04-20 Sportster 6-hole 652990

19-24 Softail, 18 FLSB 5-hole 914845

99-17 Dyna, 99-18

Softail, (except 18

FLSB), 99-15 Touring,

(except 15 FLHTKL, 15

FLHTCUL), 09-15 Trike

Does not

fit models

with H-D

Narrow

Profile

Primary

Covers

5-hole 652988

652985

Cross Point Cover

Distinctive design matching the Thunderbike footpeg Base

program. Available for Twin Cam, Evo and XL models.


Each , Qty.: 1

FITMENT DESCRIPTION BI-COLOR

ANODIZED

18-24 Softail, 17-24 Touring, 2-hole 913093

(except 23-24 FLHXSE, 23-24

FLTRXSE, 24 FLHX, 24 FLTRX, 24

FLTRXSTSE), 17-24 Trike

71-20 Sportster, 70-84 FL Shovel, 2-hole 652986

71-84 FX Shovel, 85-94 FX Model,

91-98 Dyna, 84-99 Softail, 85-98

Touring

99-17 Dyna, 99-17 Softail, 99-16


3-hole 652985

652992

Open Mind Clutch Cover


• Bicolor design

• Sold each


Each , Qty.: 1

FITMENT DESCRIPTION BI-COLOR ANODIZED

04-20 Sportster 6-Hole 652996

19-24 Softail, 18 FLSB 5-Hole 929315

Open Mind Point Cover

• Billet aluminum point covers

• Bicolor design

FITMENT

18-24 Softail, 17-24 Touring, (except

23-24 FLHXSE, 23-24 FLTRXSE, 24

FLHX, 24 FLTRX, 24 FLTRXSTSE),

17-24 Trike

71-20 Sportster, 70-84 FL Shovel,

71-84 FX Shovel, 85-94 FX Model,

91-98 Dyna, 84-99 Softail, 85-98

Touring

99-17 Dyna, 99-17 Softail, 99-16



ANODIZED

2-hole 913097

2-hole 652992

2-hole 652991

12.34

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

„Thunderbike“ Clutch Cover


• Bicolor design

• Sold each

Color: Bi-Color, Anodized , Description: 6-hole, with Thunderbike Logo , Material: Billet Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE BI-COLOR ANODIZED

84-98 Softail, 91-98 Dyna, 85-98 Touring, 85-94 FX Model 900007

HAND

CONTROLS

LIGHTING

99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15 Touring,

(except 15 FLHTKL, 15 FLHTCUL), 09-15 Trike

Does not fit models with H-D Narrow

Profile Primary Covers

900016

ELECTRICAL

EXHAUST

INTAKE

ENGINE

„Thunderbike“ Point Cover

GASKETS

FITMENT

ANODIZED

84-99 Evo Big Twin, 86-20 Sportster 900006

99-17 Twin Cam 900013

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Unbreakable Clutch Cover


• Bicolor design or chromed

• Sold each

Fitment: 99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15 Touring, (except 15 FLHTKL, 15 FLHTCUL), 09-15 Trike ,

Fitment Note: Does not fit models with H-D Narrow profile Primary Covers , Material: Billet Aluminium , Unit: Each ,

Qty.: 1

FITMENT FITMENT NOTE DESCRIPTION BI-COLOR

ANODIZED

99-17 Dyna, 99-18 Softail, (except 18 FLSB),

99-15 Touring, (except 15 FLHTKL, 15





Does not fit models with

H-D Narrow profile Primary

Covers

Does not fit models with

H-D Narrow profile Primary

Covers

5-hole 900017 900018

CHROME POLISHED

900022 900019

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.35

EDITION 51

900030

900031, 914847

Drilled Clutch Cover


• Bicolor design or chromed

• Sold each

Description: 5-hole , Material: Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE DESCRIPTION ALUMINIUM

POLISHED

BI-COLOR

ANODIZED

16-24 Touring, 15 FLHTKL, 15 FLHTCUL, 16-24 Trike 5-hole 900030 900031


84-98 Softail, 91-98 Dyna, 85-98 Touring, 85-94 FX

Model

99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15

Touring, (except 15 FLHTKL, 15 FLHTCUL), 09-15 Trike

Does not fit models with H-D

Narrow profile Primary Covers

5-hole 690894

5-hole 900021 690892

Drilled Point Cover

12

FITMENT

BI-

COLOR

POLISHED

84-99 Evo Big Twin and 86-20 Sportster 690893 900009

18-24 Softail, 17-24 Touring, (except

23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX,

24 FLTRX, 24 FLTRXSTSE), 17-24 Trike

913095 913096

99-17 Twin Cam 690891 900020

12.36

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

Torque Clutch Cover


• Bicolor design

• Sold each

Color: Bi-Color, Anodized , Material: Billet Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE DESCRIPTION BI-COLOR ANODIZED

04-20 Sportster 6-hole 900028

04-20 Sportster With Thunderbike Logo, 6-hole 900029

16-24 Touring, 15 FLHTKL, 15

FLHTCUL, 16-24 Trike

16-24 Touring, 15 FLHTKL, 15

FLHTCUL, 16-24 Trike

5-hole 900032

With Thunderbike Logo, 5-hole 900033


19-24 Softail, 18 FLSB With Thunderbike Logo, 5-hole 914849

99-17 Dyna, 99-18 Softail, (except

18 FLSB), 99-15 Touring, (except 15

FLHTKL, 15 FLHTCUL), 09-15 Trike

99-17 Dyna, 99-18 Softail, (except

18 FLSB), 99-15 Touring, (except 15






5-hole 900025

With Thunderbike Logo, 5-hole 900026

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

900010 900011 900023 900024

Torque Point Cover

• Anodized Aluminium

• Bicolor Design

• Sold each

Color: Bi-Color, Anodized , Material: Aluminium , Unit: Each , Qty.: 1

FITMENT FITMENT NOTE DESCRIPTION BI-COLOR

ANODIZED

18-24 Softail, 17-24 Touring, (except 23-24 FLHXSE, 23-24

2-hole 913098

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 Trike

18-24 Softail, 17-24 Touring, (except 23-24 FLHXSE, 23-24

With Thunderbike 913099

FLTRXSE, 24 FLHX, 24 FLTRX, 24 FLTRXSTSE), 17-24 Trike

Logo, 2-hole

71-20 Sportster, 70-84 FL Shovel, 71-84 FX Shovel, 85-94

2-hole 900010

FX Model, 91-98 Dyna, 84-99 Softail, 85-98 Touring

71-20 Sportster, 70-84 FL Shovel, 71-84 FX Shovel, 85-94


FX Model, 91-98 Dyna, 84-99 Softail, 85-98 Touring

Logo, 2-hole

99-17 Dyna, 00-17 Softail, 99-16 Touring, 09-16 Trike 18-24 Softail, 17-24 Touring, 17-24 5-hole 900023

Trike M8 only with Thunderbike

adapter-kit, except (except 23-24

FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24

FLTRX, 24 FLTRXSTSE

99-17 Dyna, 00-17 Softail, 99-16 Touring, 09-16 Trike 18-24 Softail, 17-24 Touring, 17-24

Trike M8 only with Thunderbike

adapter-kit, except (except 23-24

FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24

FLTRX, 24 FLTRXSTSE


Logo, 5-hole


WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

12.37

EDITION 51

Domed 5-Hole Derby Cover for Big Twin Models

These domed derby covers are die-cast aluminum. Available in

different finishes. Includes hardware.

Derby Cover for Big Twin 99-17 except Touring 15-17 with

narrow profile primary cover (Low 15, all Touring 16-17)

688840 Chrome-plated

688841 Black wrinkle

688842 Satin black

SP-S Clutch Cover

• CNC milled aluminum

• Black anodized

• Thunderbike SP-S design

• Installation instructions / manual (DE/EN)

Part#: 923641 , Fitment: 21-23 Sportster S RH1250S, 22-23

Nightster RH975, 23 Nightster Special RH975S , Color:

Black, Anodized , Unit: Each , Qty.: 1

Domed 5-Hole Derby Cover for Big Twin

Models

Made of cast aluminum for Twin Cam 99-17, except 15 FLHTKL,

FLHTCUL and 16-17 Touring, Trike

600680 Chrome-plated (repl. OEM 60668-99)

12

Chrome ‘Porthole’ Timer Cover

Brilliantly-designed covers simulating port holes set off an eyecatching

custom look.

• Made of CNC billet aluminum and polished chrome

• Easy installation in minutes

• Sold each

98367 Points cover for all 70-98 Big Twin & 79-03 Sportster

‘Live To Ride’ Derby and Inspection Covers

Classic design with either ‘A Way of Life’ banner or ‘Eagle Spirit’

banner.

Derby Covers

Fits all Big Twin models from 70-98.

19005 ‘A Way of Life’ in Chrome

18920 ‘Live To Ride’ in Gold

‘Riveted’ Point Cover

Get that high-tech ‘racers only’ look with our buttonhead

‘Riveted’ chrome covers. Includes mounting hardware.

37251 Point cover fits 79-03 Sportster and 70-98 Big Twin models

12.38

APPAREL

SEATS &

TOURING

Chrome Flat Inspection Covers

Fits 4-speed Big Twins with forward controls from 65-86 and

Softail and Dyna Wide Glide models from 86-06.

15936 With counter sunk holes for OEM hardware(replaces

OEM 60572-78T)

15935 Without countersunk holes for use with sockethead

bolts

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

‘Flat’ and ‘Domed’ Derby Covers

Chromed or black heavy-gauge flat-steel or die-cast domed

derby covers. Fit all Big Twin models from 70-98.

15148 Chrome flat derby cover (repl. OEM 52573-77T)

25230 Chrome domed derby cover (repl. OEMs 60668-84A,

25392-84T)

688055 Black domed derby cover (repl. OEMs 60668-84A, 25392-

84T)

EXHAUST

INTAKE

ENGINE

Precision Inner Primary CoverC

• One-piece design with replacement screws for easy installation

• Die-cast aluminum construction with premium chrome or gloss

black finish

PART# FITMENT COLOR FINISH

776413 17-24 Touring, 17-24 Trike Chrome

776443 17-24 Touring, 17-24 Trike Black Gloss

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Covers for ‘Tin’ Style Outer Primary Covers

Enhance the look of your ‘tin’ style primary with these heavygauge

covers.

12266 Chrome dimpled inspection cover. Fits Big Twin models

36-64 (repl. OEM 60573-36).

12267 Chrome derby cover. Fits Big Twins 36–64 (repl. OEM

60555-36).

605305

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

Domed 4-Hole Derby Cover for Sportster

Dress up your 94-03 with this chrome 4-screw derby cover.

25232 Replaces OEM 34761-94

Inner Primary Covers by Kuryakyn

Transform your bike by adding these smooth lines to your inner

primary. Fits perfectly with the existing stock engine case and

primary housing.

605236 Inner primary cover for 07-17 Softails (except 08-11

FXCWI, 13-17 FXSB)

605305 Inner primary cover for 07-08 Touring models

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.39

EDITION 51

775706

Aztec Primary Cover SetSet

• Includes primary cover and center medallion

• Sized to match Indian Commemorative Coins and other factory

emblems intended for the primary, offering multiple custom

options

Derby Cover

Derby cover with Cult-Werk logo or with CNC Designs. They can

easily be exchanged for the original part and thus enhances your

V-Rod.

Color: Black, Anodized , Material: Aluminium , Unit: Each ,

Qty.: 1

PART#

FITMENT

921492 16-24 Touring, 15 FLHTKL, 15 FLHTCUL, 16-24 Trike

PART# FITMENT COLOR UNIT

775706

15-20 Indian Bagger, 12-20 Indian

Cruiser, 15-20 Indian Touring

Black

Set

12

918224

918226 930137

930138

930139 930140

10-Gauge Derby Cover

• Machined from 6061-T6 billet aluminum

• 10-Gauge styling

• Chrome hardware included and gasket

• Matching 10-Gauge Point Cover

and other accessories are available

separately


BLACK BLACK CUT CHROME GOLD

FITMENT

ANODIZED ANODIZED

ANODIZED

16-24 Touring, 15 FLHTKL, 15 FLHTCUL, 16-24 Trike 930137 918224 918226 930138

99-17 Dyna, 00-18 Softail, (except 18 FLSB), 99-15 Touring, (except 15 FLHTKL, 15

FLHTCUL)

930139 918223 918222 930140

12.40

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

HKC Engine Covers

Matching design covers from Hells Kitchen Choppers made of billet aluminum in Germany. Available for several models in flat black

or polished versions.

Derby Covers for Big Twin Models with 3-Hole Covers

from 70-98

682086 Flat black Spades

682087 Polished Iron Cross

682088 Flat black Iron Cross

681802 Flat black 8-Ball

681803 Flat Black King Crime

Models with 5-Hole Covers from 99-05




681805 Flat black King Crime

Derby Cover for Twin Cam 99-17, except 15 FLHTKL,

FLHTCUL and 16-17 Touring, Trike





Derby Covers for Sportster Models 04-20, 6-Hole




Inspection Covers for Most 4-Speed and Softail Models from

65-93

682097 Polished Spades




Inspection Covers for 94-06 Softail and 94-05 Dyna Wide

Glide Models

682103 Polished Spades




Point Covers for Models with Horizontal Mounting Holes

from 70-03 (except Twin Cam 88 Models)





Point Covers (5-hole) for all Big Twin 99-17 (except Touring 17, 15-16

narrow profile primary cover)





INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.41

EDITION 51

CONTRAST CUT

Chrome

Nostalgia Derby Cover

• Design matched to the Nostalgia line of products

• Easy bolt-on installation

• CNC machined from billet aluminum

• Hardware included

• Made in the USA

Material: Billet Aluminium , Unit: Each , Qty.: 1

TM

FITMENT DESCRIPTION CHROME CONTRAST CUT

04-20 Sportster 3-Hole 895928

99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15 Touring, (except 15

FLHTKL, 15 FLHTCUL)

5-Hole 895923 895922

895918 895919 895920 895925 895926

Clarity Derby Cover

• Allows for viewing of internal engine components

12• Designed as a stock replacement on your OEM Primary

TM

• CNC machined from billet aluminum & polycarbonate

• Specialty coating does not allow oil and grease to adhere

• Proprietary abrasion and UV resistant film to protects surface from yellowing, marring or breakage


FITMENT DESCRIPTION BLACK OPS CHROME CONTRAST CUT

04-20 Sportster 895926 895925

99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15

Touring, (except 15 FLHTKL, 15 FLHTCUL)

5-hole 895920 895919 895918

12.42

APPAREL

SEATS &

TOURING

912361 912361 912362 912363 912367

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

925255

917583 919343 925254

925255

ELECTRICAL

EXHAUST

Porthole Derby Cover

• Glass panel offers a view on the clutch’s mechanical components

• The screen is made of an impact-resistant Makrolon disk

• Gaskets and O-rings sold separately


FITMENT

16-24 Touring, 15 FLHTKL, 15 FLHTCUL, 16-

24 Trike

ALUMINIUM POLISHED BI- BLACK SATIN GLOSS BLACK TEXTURED BLACK

COLOR,

GLOSS

BLACK

925253 925254 925255 918290

19-24 Softail, 18 FLSB 917583 918563 925252 919343

INTAKE

ENGINE

GASKETS

85-94 FX Model, 91-98 Dyna, 84-98 Softail,

85-98 Touring




912361 912363 912362 912364

912366 912368 912367

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.43

EDITION 51

688840 928167 928168 928169 928170

Smooth Derby Cover for Big Twins

Smooth, domed 5-Hole Derby Cover for Big Twin Models.

• Die-cast aluminum

• Includes hardware

Description: 5-hole , Material: Cast Aluminium , Unit: Each , Qty.: 1


688840 99-17 Dyna, 00-17 Softail, 99-15 Touring, (except 15






Not for models with Narrow

Profile primary cover





Chrome

928167 19-24 Softail, 18 FLSB Chrome

Black

Satin Black Powder Coated

928168 19-24 Softail, 18 FLSB Black Powder Coated

928169 19-24 Softail, 18 FLSB Satin Black Powder Coated

928170 19-24 Softail, 18 FLSB Textured Black Powder Coated

12PART#

928163 928164 928166

Smooth Point Cover for Big Twins

Fitment: 18-24 Softail, 17-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLTRXSTSE, 24 FLHX, 24 FLTRX), 17-24 Trike

, Unit: Each , Qty.: 1

COLOR

928163 Chrome

928164 Black Powder Coated

928165 Matte Black Powder Coated

928166 Textured Black Powder Coated

Performance Derby Cover

• High quality billet aluminium

• Manufactured with highest precision

• Maximum, efficient heat transfer

• Clean racing look

• Laser engraved with HeinzBikes Performance logo

Color: Gloss Black, Anodized , Description: 5-Hole , Unit: Each , Qty.: 1

PART# FITMENT FITMENT NOTE

926584 19-23 Softail, 18 FLSB

926586 99-17 Dyna, 99-18 Softail, (except 18 FLSB), 99-15

Touring, (except 15 FLHTKL, 15 FLHTCUL), 09-15 Trike

Except models with narrow profile primary

12.44

APPAREL

SEATS &

TOURING

Performance Timer Cover

• High quality billet aluminium

• Manufactured with highest precision

• Maximum, efficient heat transfer

• Clean racing look

• Laser engraved with HeinzBikes Performance logo

Color: Gloss Black, Anodized , Unit: Each , Qty.: 1

PART# FITMENT DESCRIPTION

926585 18-23 Softail, 17-23 Touring, 17-23 Trike 2-Hole

926587 99-17 Dyna, 99-17 Softail, 99-16


5-Hole

Vision Derby Cover

Performance Machine Vision Series Derby Covers give you the

power to view what goes on inside the heart of your bike‘s

clutch pack.

• Aluminum lens bezel eliminates cracking

• UV, abrasion, hazing, and yellowing resistant polycarbonate

lens


• Chrome hardware included

• Match perfectly with entire line of PM Vision Series products

Fitment: 16-24 Touring, 15 FLHTKL, 15 FLHTCUL, 16-24 Trike

, Material: Aluminium , Unit: Each , Qty.: 1

PART#

COLOR

918194 Black Ops, Anodized

918193 Contrast Cut, Anodized

Scallop Derby Cover

The new Performance Machine Scallop Cover Line was created

to replace those uninspiring H-D stock covers that are often

overlooked, but present the perfect opportunity to add a custom

hot rod touch to your motorcycle. Each billet aluminum cover

features timeless styled machined cut scallops with the iconic PM

logo. All covers are a direct replacement for OE covers that are

shipped with hardware and all necessary gaskets. Get them all,

and make your machine a perfect Performance Machine.


PART# FITMENT COLOR

918671 00-17 Softail, 99-15 Touring, (except 15

FLHTKL, 15 FLHTCUL), 99-17 Dyna, 09-15

Trike

918687 16-24 Touring, 15 FLHTKL, 15 FLHTCUL,

16-24 Trike

918689 16-24 Touring, 15 FLHTKL, 15 FLHTCUL,

16-24 Trike

918676 70-84 FL Shovel, 71-84 FX Shovel, 85-94

FX Model, 91-98 Dyna, 84-99 Softail, 86-

98 Touring

Chrome

Contrast Cut,

Anodized

Chrome

Black Ops,

Anodized

Race Series Derby Cover

Elevate the style of your Harley-Davidson Milwaukee-

Eight power plant with the Race Series engine covers from

Performance Machine. The Race Series covers are carefully

crafted with the utmost precision to dissipate heat more

effectively and provide a race-inspired look. Performance

Machine went beyond simply designing a series of engine

covers which only enhance the appearance of the M8 platform.

Painstaking hours were spent chasing forms and shapes

which transfer heat more efficiently away from the engine &

transmission to better accommodate increased temperatures

synonymous with racing. To complete the look, these covers

come in the innovative Black Ops finish with laser engraved

logos to provide a durable, yet elegant appearance.


• Dissipates heat more efficiently vs. stock covers

• Provides a race-inspired look

• Chrome hardware included

Color: Black Ops , Material: Billet Aluminium , Unit: Each ,

Qty.: 1

PART#

FITMENT

925122 16-24 Touring, 15 FLHTKL, 15 FLHTCUL

925121 19-24 Softail

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.45

EDITION 51

‘Mesh’ Derby and Inspection Covers by Fred

Kodlin

The perfect addition to Fred Kodlin’s Mesh style customparts

with matching design! Easy to exchange and a real eyecatcher to

customize your ride.

3-Hole Derby Covers

685700 Mesh 3-hole cover gold

Inspection Covers

685712 Mesh inspection cover black

685713 Mesh inspection cover chrome

Joker Machine Sportster 04-20 Derby Covers

Tired of that boring stock cover? Throw it away and replace it

with one of these eye pleasers.

Finned Derby Cover

684989 Black finned cover

890377

‘Thriller’ Derby Covers by Fred Kodlin

5-Hole Derby Covers for Big Twin 99-17 except Touring 15-17 with

narrow profile primary cover (Low 15, all Touring 16-17)

685691 Thriller 5-hole cover gold

Derby Covers by DUB Performance

For all fans of the DUB product line we have added these

beautifully machined 5-hole derby covers to our range. Available

in polished or black anodized finish.

652577 DUB crown logo derby cover polished

12

890374

‘Mesh’ Point Covers by Fred Kodlin

The perfect addition to Fred Kodlin’s Mesh style customparts!

Easy to exchange and a real eyecatcher to customize your ride.

For Evolution Models

685686 Mesh point cover Evo black

685687 Mesh point cover Evo chrome

685688 Mesh point cover Evo gold

890376

12.46

Pro-One ‘Millennium’ Covers

Chrome billet engine covers feature rounded edges. Available in

smooth or ball milled styles.

Derby Covers

Fit all 99-17 Big Twins (except narrow profile primary cover)

65451 Smooth

Derby Covers Stanza

• Ribbed design

• To be matched with the

point covers

• Chrome or black cut

For Big Twins 70-98

890374 3 holes, chrome

890375 3 holes, black cut

For Softails 99 and all Twin

Cams 00-17 (except 15-17

narrow profile primary

cover)



APPAREL

890378

890379

SEATS &

TOURING

890380

890381

Multiple Skull Inspection Cover

Polished cast aluminum from hand-carved mold. Fits 4-speed FL

and FX models with floorboards or forward controls from 65-86,

Softail & FX Wide Glide 84-06 & Dyna 91-06 with stock forward

controls

33154 Sold each

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

Point Covers Stanza

• Ribbed design

• To be matched with the derby covers

• Chrome or black cut

For all Sportsters 04-20

890378 2 holes, horizontal mount, chrome

890379 2 holes, horizontal mount, black cut

For all Sportsters 86-03

890380 2 holes, vertical mount, chrome

890381 2 holes, vertical mount, black cut

For all 99-17 Dyna, 99-18 Softail, except 18 FLSB, 99-15

Touring, except 15 FLHTKL, 15 FLHTCUL, 09-15 Trike



890383

37733

Multiple Skull Covers

Polished cast aluminum from hand carved mold. Fit Big Twin

models from 70-98 (except Twin Cam models).

37733 Derby cover with big and small skulls

37729 Point cover

37729

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

37725

TRANNY &

CLUTCH

37861

DRIVELINE

37862

WHEELS, TIRES

& BRAKES

37860

Skull Engine and Primary Covers

Ominous 3-dimensional skulls design. Gives a tuff look that’s sure

to draw attention in any crowd. Made from polished aluminum,

each piece is sand-cast from a hand-carved original.

Point Covers

37728 Skull, 5 hole mounting. Fits Twin Cam models from 99-17

37862 84-99 Evo Big Twin, 86-20 Sportster

Derby Covers

37726 Fits 99-17 Twin Cam (except narrow profile primary

cover)

37860 Skull, fits all Big Twin models from 70-98

37727 Fit all Sportster models from 94-03

Inspection Cover

37861 Skull, fits 4-speed FL and FX models with floorboards or

forward controls from 65-86, as well as Softail and Dyna

Wide Glide models from 84-06

Skull Rocker Box Cover Sets

37725 Fits Evolution Big Twins from 84-99

Custom Chrome Point & Derby Covers

Point Covers

688215 Black/chrome skull 99-17 TC

688216 Black/chrome skull horiz. holes 84-99 Evo Big Twin, 86-20

Sportster

688217 Black/chrome skull vertical mount hole 86-03 XL

688218 Black/gold skull fits 99-17 TC

688219 Black/gold skull horiz. mount hole 84-99 Evo Big Twin, 86-20

Sportster

688220 Black/gold skull vertical mount hole 86-03 XL

Derby Covers

688221 Black/chrome skull 84-98 BT

688222 Black/chrome skull for 99-17 Dyna, 99-18 Softail, except 18 FLSB,

99-15 Touring, except 15 FLHTKL, 15 FLHTCUL, 09-15 Trike

688223 Black/gold skull 84-98 BT

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.47

EDITION 51

Transmission Belt Pulley

Color: Raw , Position: Front , Unit: Each , Qty.: 1

FITMENT

FITMENT NOTE

TEETH

DESCRIPTION

OVERDRIVE

POWER

STOCK

12

06-17 Dyna, 07-16

Touring, 07-17 Softail

06-17 Dyna, 07-17


Requires the rear axle to be adjusted towards the rear of

the bike. If there is not enough axle adjustment for the new

pulley, use a belt with more (or less) teeth than stock.

30 6.4% more

RPM

912518

Requires the rear axle to be adjusted towards the rear of 31 3% more RPM 912520



06 Dyna Requires the rear axle to be adjusted towards the front of 34 6.4% less RPM 912526



07-16 Touring, 06-17

Dyna, 07-17 Softail

18-24 Softail, 17-24


18-24 Softail, 17-24


18-24 Softail, 17-24


85-93 FX Model, 85-93

Softail, 91-93 Dyna, 85-

93 Touring

85-93 FX Model, 85-93

Touring, 85-93 Softail,

91-93 Dyna

85-93 FX Model, 91-93


93 Touring

85-93 FX Model, 91-93


93 Touring

94-06 Touring, 94-05

Dyna, 94-06 Softail

94-06 Touring, 94-05

Dyna, 94-06 Softail

94-06 Touring, 94-06

Softail, 94-05 Dyna

94-06 Touring, 94-06

Softail, 94-05 Dyna

32 Stock

replacement

912523

32 Stock

912531

replacement

Requires the rear axle to be adjusted towards the front of 34 6.4% less RPM 912530






Requires the rear axle to be adjusted towards the front of 33 3% less RPM 912528



32 Stock

912525

replacement




Requires the rear axle to be adjusted towards the rear of

the bike. use a belt with more (or less) teeth than stock.

30 6.4% more

RPM

912519

Requires the rear axle to be adjusted towards the front of



33 3% less RPM 912527




32 Stock

replacement




912524

12.48

Gear Ratio Chart for Final Drive Pulleys

Transmission Pulley

Stock 5-speed Big Twins come with 32-tooth pulleys. Smaller 29, 30, and

31-tooth pulleys provide stronger acceleration, while larger 33 and 34-tooth

pulleys reduce engine speed for smoother cruising. For example, a 34-tooth

pulley will reduce engine speed by about 240 RPM at 60 mph.

Rear Wheel Pulley

Smaller pulleys will reduce the engine speed for smoother cruising. Larger

pulleys will raise the engine speed for stronger acceleration. 93 Softail

models came with 61-tooth rear wheel pulleys. 94 Softail models came with

70-tooth rear wheel pulleys. 95-99 Softail models came with 65-tooth rear

wheel pulleys, and Twin Cam 88 Softail models have 70-tooth pulleys. All

other Big Twins equipped with rear belt drive units since 80, have 70-tooth

rear pulleys.

Primary Drive Ratios

A primary ratio of 1.54 (24/37 tooth combination) was stock on all Big Twin

models from 85-93. A primary ratio of 1.44 (25/36 tooth combination) is

stock on all Big Twin models from 94-05.

Transmission

Pulley

Rear Wheel

Pulley

Secondary

Ratio

Overall Ratio

(1.54 Primary)

Overall Ratio (1.44

Primary)

29 70 2.41 3.72 3.48

30 70 2.33 3.60 3.36

31 70 2.26 3.48 3.25

32 70 2.19 3.37 3.15

33 70 2.12 3.27 3.06

34 70 2.06 3.17 3.00

29 68 2.35 3.61 3.38

30 68 2.27 3.49 3.26

31 68 2.19 3.38 3.16

32 68 2.13 3.27 3.06

33 68 2.06 3.17 2.97

34 68 2.00 3.08 2.88

29 65 2.24 3.45 3.23

30 65 2.17 3.34 3.12

31 65 2.10 3.23 3.02

32 65 2.03 3.13 2.92

33 65 1.97 3.03 2.84

34 65 1.91 2.94 2.75

29 61 2.10 3.24 3.02

30 61 2.03 3.13 2.92

31 61 1.97 3.03 2.83

32 61 1.91 2.94 2.75

33 61 1.85 2.85 2.66

34 61 1.79 2.76 2.58

Andrews Final Drive Pulleys

Change your final drive ratio with Andrews’

transmission pulleys. Precision-machined from heattreated

gear-quality steel. Fit 5-speed Big Twins from

85-06.

85-93 94-06, EXCEPT

06 DYNA

24200 * n/a 29-tooth pulley

n/a 24322 30-tooth pulley

24201 * 24323 34-tooth pulley

* Spacer and seal included

JIMS “Mega” Transmission Pulley Nut

for 5-Speed Models

The “Mega” nut features a built in lock plate that

stays tight even in high-performance application.

Fits all 5-speed models from 93-06.

060650 Sold each

Transmission Final Drive Pulley

Spacer

Fits Big Twin models from 85-93 (not shown).

56250 Replaces OEM 33334-85 (sold each)

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Aluminum Transmission Drive Pulleys by Belt Drives Limited

All new lightweight 7075 super strong aluminum transmission pulleys weigh about

1/3 as much as stock pulleys for extended 5th gear bearing life (4-speed pulleys are

constructed of 356 aluminum). And lighter weight means more horsepower to the

rear wheel. The pulleys are hard anodized for durability. A wide selection of sizes

permits fine tuning of final drive ratio. Includes a new spacer, shaft nut, seal and

retaining plate with screws. Made in the USA.

For Big Twin Models from 85-06

(except 06 Dyna)

42571 29-tooth

42572 30-tooth

42573 31-tooth

42574 32-tooth

42575 33-tooth

42576 34-tooth

Fit Sportster and Buell Models

from 91-03

42740 28-tooth

42741 29-tooth

42742 30-tooth

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.49

EDITION 51

Transmission Drive

Pulleys for Sportster

These transmission drive pulleys

are made high grade steel

then heat treated to last a long

time. A great alternative to the

higher price aluminum pulleys.

Sold each.

Fits Sportster models 04-20

642700 28 tooth. Replaces

OEM# 40379-04


OEM# 40409-04


OEM# 40380-04

Fits Sportster models 91-03


OEM# 40288-95

642704 28 tooth.


OEM# 40205-95

Baker Long Life

Sprocket Spacer Seal

624050 Sold each, 94-06

(except 06 Dyna)

(repl. OEM 12067A)

Baker Long Life

Sprocket Spacer

624049 Sold each, OEM

33344-94

Baker Long Life

Pulleys, B/T 94-06

(except 06 Dyna)

624045 31-tooth

25 Tooth Drive

Sprocket

893492 For Softail models

90-93 and FX/FXR

models 85-90 (repl.

OEM 40269-85A)

Transmission Pulleys for

Big Twins

Stock style replacement pulleys

available with 30, 32 (stock) or

34 teeth. Steel construction.

For 5-Speed Big Twins from

85-93

080195 32 tooth (replaces

OEM 40210-85B)

080196 34 tooth

For 5-Speed Big Twins from

94-06

080198 32 tooth (replaces

OEM 40250-94)

12

1954-E1979

XL MODELS

L1979-E1984

XL MODELS

L1984-1990

XL MODELS

1936-1979

4-SPEED

1980-1985

4-SPEED

1980-1984

5-SPEED

Premium

Transmission

Sprockets

Precision-machined Americanmade

transmission sprockets

are plated for corrosion

resistance and fully hardened

for maximum service and

performance.

For Big Twins from 36-79

26418 22 tooth (repl. OEM

35203-36)


35212-73)

12227 24 tooth

12228 25 tooth

12229 26 tooth

For Big Twins with 4-Speed

Transmissions from 80-85


33338-83)


33337-83)

12223 24 tooth

For Sportster and K Models

54-79


35197-52)

18335 24 tooth

For Sportster Models from

79-84

1For Sportster Models from

84-90


35208-84)

18346 22 tooth

18347 23 tooth

For 5-Speed Evolution

Sportster Models from

91-92


37709-89)

18356 22 tooth

18357 23 tooth

Heavy-Duty

Transmission

Sprockets

High-quality imported

transmission sprockets provide

a lower-cost alternative to

our American-made Premium

transmission sprockets. Plated

for corrosion resistance and

fully hardened for maximum

service.

For Big Twins from 36-79

18368 25 tooth

For Big Twins with 5-Speed

Transmissions from 80-84,

and 5in4


33336-83)

18370 Transmission chain

sprocket, 23 tooth

(repl. OEM 33336-83)

18371 24 tooth

For Sportster and K Models

54-79

18382 20 tooth

18381 24 tooth


79-84


35205-79A)

18373 22 tooth


84-90

18376 22 tooth

12.50

APPAREL

SEATS &

TOURING

894955 894956

FOOT

CONTROLS

Aluminium Drive Pulleys by

Primo Rivera

893535 For Big Twins 93- with 32 tooth

for 2” rear belt drive


for 1” rear belt drive


29 Tooth Belt Drive

Transmission Pulley for

5-Speed Big Twin

• Precision machined

• Heat-treated quality alloy

steel

Higher torque (lower top speed) in

comparison with OEM 32 tooth pulley.

Recommended for high performance

engines.

Part#: 919684 , Fitment: 94 FX

Model, 94-05 Dyna, 94-06 Softail,

94-06 Touring , Fitment Note: Use in

combination with 1 1/8“ and 1 1/2“

final belt and rear pulley , OEM #:

40250-94 , Unit: Each , Qty.: 1

894957

Transmission Offset Sprockets

894955 26T 1/2” Offset Dyna 06-, Softail,

Touring 07-


Touring 07-


Touring 07-


Touring 07-*


Touring 07-*


Touring 07-*

Note: *Touring models 07- Requires modification

on primary and final

drive!

Belt to Offset Sprocket

Conversion Kit for 5-Speed

Big Twins

Install 150-series tires on 5-speed Big Twin

models by converting from belt to chain drive.

Offset 24-tooth front sprocket and spacer

moves the rear drive chain away from the tire.

The stock final drive ratio on 5-speed models

is 2.1875. Installation in conjunction with a

51-tooth rear sprocket will change the ratio to

2.125, with a 48-tooth rear sprocket it will lower

to 2.000 which is ideal for stroker motors. Fits

Softail models from 86-06 when used with 73-85

4-speed rear sprockets, and FXR models from

85-94 when used with rear sprockets originally

for FXR’s.

25658 Kit with 24-tooth sprocket

Offset Sprocket Kits for

4-Speed Big Twin Models

The perfect answer for problems posed by

the mounting of custom wide rear tires

or wheels. Includes offset transmission

sprocket, precision machined rear sprocket

spacer plate and hardware. Sprocket

offset is .255”. Spacer is .305” thick.




Replacement Sprockets

Specifically for the kits listed above.

18385 22-tooth

18386 23-tooth

18387 24-tooth

Note: Designed to ease problems encountered on some

custom applications. 1979 through 1985 FX models require

substantial modifications including changeover to a Prestolite

starter. Custom Chrome will happily provide a detailed instruction

sheet before your purchase so that you can better determine

its benefits for your particular application.

Mainshaft Sprocket Spacers

Get the proper clearance between the

transmission sprocket and case on 80-81

4-speed chain drive models, and earlier

style transmissions in conjunction with

aftermarket sprockets.

12225 Spacer, sprocket (repl. OEM

35079-80) pack of 5

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.51

EDITION 51

19519

Sprocket Covers for Sportster Models

These aluminum sprocket covers are available with your choice of

a polished or a chrome finish and are accurate reproductions of

the Original Equipment parts.

Fit 4-Speed Models from 82-90

19519 Chrome

19520 Polished (repl. OEM 34911-81TB)

Front Pulley Cover for 04-20 Sportster, except

08-10 XR 1200, 10-13 XR 1200X

• For use when stock pulley cover is removed

• Stainless steel wire mesh center

• Hardware included

• Pairs with Tracker Front Pulley Guard

896338 Contrast Cut

896339 Black Ops

12

Front Pulley Cover for Sportster S and

Nightster

The Tunderbike design cover for the front belt pulley provides a

classy black cut look.

• Machined aluminium

• Short belt guard is included

• Pulley-cover rotates with

Fitment: 21-24 Sportster S RH1250S, 22-24 Nightster

RH975, 23-24 Nightster Special RH975S , Color: Black Cut ,

Material: Billet Aluminium , Qty.: 1

PART# DESCRIPTION UNIT

923639 Plain Design Kit

929308 SP-S Design Each

Sprocket Cover for Sportster 04-20

Lightweight, functional and awesome looking. Includes mounting

hardware. Fits 04-20 Sportster, except 08-10 XR 1200, 10-13 XR

1200X

684995 Black sprocket cover

684996 Satin sprocket cover

12.52

Sprocket Cover

APPAREL

Pulley Cover

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

Drilled Pulley and Sprocket Cover for

Sportster

Stylish cover CNC-made with High-Tech look. The Sprocket cover

is the OEM version with round cut-out to get a free sight on the

pulley. You’ll need both to complete the look. Available for 28,

29 or 30 tooth pulley. Fits 04-20 Sportster, except 08-10 XR 1200,

10-13 XR 1200X

607983 Pulley cover (28 teeth Pulley)



607986 Sprocket cover, drilled Sprocket and Front Pulley Cover for Sportster

S and Nightster

Exclusive designed „open running“ front belt pulley, allowing to

view the rotating pulley highlighted with a machined cover

• Inner and outer cover for original/stock front sprocket

• Stainlees steel outer cover

• Form pressed and 3D lasered

• Powder coated black

• Bi-Color front Pulley cover

• CNC machined

Sprocket and Front Pulley Cover Mounting Kit

for Sportster S and Nightster

This mounting kit contains hardware to mount the Ricks

Sprocket and Front Pulley Cover according to factory

requirements.

• Kit contains:

• 1 x Nut (10400066A)

• 1 x Oil Seal (34800058)

• 1 x Spacer (36300030)


Nightster RH975, 23-24 Nightster Special RH975S , Color:

Black , Unit: Kit , Qty.: 1

• Made from high grade aluminum

• Black anodized and laser engraved

• Easy installation

• Delivery in a set, including both parts

• Including hardware for the covers

• Additional hardware kit for installaion according factory

requirements available (sold seperately)

• Made in Germany


Nightster RH975, 23-24 Nightster Special RH975S , Color:

Black , Unit: Kit , Qty.: 1

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Outer Sprocket Cover

• Direct replacement with the OE plastic cover

• Milled from aluminium 6082

• Black anodized and machined for the „black-cut“ look

• Laser etched VP logo

Part#: 917824 , Fitment: 25 Indian Scout , Color: Black Cut,

Anodized , OEM #: 5453945 , Unit: Each , Qty.: 1

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.53

EDITION 51

‘Nitro 18’ ‘Dominator 6’

REVTECH BELT PULLEYS

YEAR TOURING MODELS WIDTH TOOTH

NITRO 18

CHROME

07 FLHT/FLHR/FLTR 1" 66 603702

NITRO 18

‘MIDNIGHT SERIES’

DOMINATOR 6

‘MIDNIGHT SERIES’

04-06 FLHT/FLHR/FLTR 1 1/8" 70 603759

00-03 FLHT/FLHR/FLTR 1 1/2" 70 602768 603758

84-99 FLHT/FLHR/FLTR 1 1/2" 70 602768 603758

84-99 FLHT/FLHR/FLTR 1 1/2" 65 603764

Year

FLST Softail Models

84-99 FXST 1 1/2" 65 603764

12

NEED PULLEY

SPACER

07-23 FLST with 150 tire* 1" 66 603702 603750

07-17 FLSTF with 200 tire* 20 mm 66 603704 603749

00-06 FLST 1 1/8" 70 603759

84-99 FLST 1 1/2" 70 602768 603758

84-99 FLST 1 1/2" 65 603764

Year

FXST Softail Models

07-15 FXST with 200 tire* 20 mm 66 603704 603749

08-11 FXCW/C* 20 mm 66 603704 603750

06 FXST with 200 tire 20 mm 70

00-05 FXST with 150 tire 1 1/8" 70 603759

84-99 FXST 1 1/2" 70 602768 603758

Year

Dyna Models

07-17 FXD* 1" 66 603702 603751

00-06 FXD 1 1/8" 70 603759

84-99 FXD 1 1/2" 70 602768 603763

84-99 FXD 1 1/2" 65 603764

Year

FXR Models

00-01 FXR 1 1/8" 70 603759

84-99 FXR 1 1/2" 70 602768 603763

84-99 FXR 1 1/2" 65 603764

* These models require an additional pulley spacer (sold seperatly) for proper installation. Please add part# of the right hand column to the wheel order!

12.54

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

‘RevPro’

HAND

CONTROLS


TOURING MODELS WIDTH TOOTH

REVPRO

CHROME

FLHT/FLHR/FLTR 1" 66 603732

REVPRO ‘MIDNIGHT

SERIES’

FLHT/FLHR/FLTR 1 1/8" 70 602785

FLHT/FLHR/FLTR 1 1/2" 70 603730 602787

FLHT/FLHR/FLTR 1 1/2" 70 602787

FLHT/FLHR/FLTR 1 1/2" 65

FLST Softail Models

NEED PULLEY SPACER

FLST with 150 tire* 1" 66 603732 603750

FLSTF with 200 tire* 20 mm 66 603734 602784 603749

FLST 1 1/8" 70 602785

FLST 1 1/2" 70 602787

FLST 1 1/2" 65

FXST Softail Models

FXST with 200 tire* 20 mm 66 603734 602784 603749

FXCW/C* 20 mm 66 603734 602784 603750

FXST with 200 tire 20 mm 70

FXST with 150 tire 1 1/8" 70 602785

FXST 1 1/2" 70 602787

FXST 1 1/2" 65

Dyna Models

FXD* 1" 66 603732 603751

FXD 1 1/8" 70 602785

FXD 1 1/2" 70 602787

FXD 1 1/2" 65

FXR Models

FXR 1 1/8" 70 602785

FXR 1 1/2" 70 602787

FXR 1 1/2" 65

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.55

EDITION 51

Velocity T-5

‘RevPro’

12


YEAR TOURING MODELS WIDTH TOOTH T-5

CHROME

T-5

‘MIDNIGHT

SERIES’

VELOCITY

‘MIDNIGHT

SERIES

07 FLHT/FLHR/FLTR 1” 66 603826 603346 603732

NEED REVPRO REVPRO NEED PULLEY

PULLEY CHROME

SPACER

SPACER

04-06 FLHT/FLHR/FLTR 1 1/8” 70 603828 602785

00-03 FLHT/FLHR/FLTR 1 1/2” 70 603852 603830 603350 603730 602787

84-99 FLHT/FLHR/FLTR 1 1/2” 70 603852 603830 603350 602787

YEAR

FLST SOFTAIL MODELS

07-19 FLST with 150 tire* 1” 66 603826 603346 603750 603732 603750

07-17 FLSTF with 200 tire* 20 mm 66 603849 603827 603347 603749 603734 602784 603749

00-06 FLST 1 1/8” 70 603828 602785

84-99 FLST 1 1/2” 70 603852 603830 603350 602787

YEAR

FXST SOFTAIL MODELS

07-15 FXST with 200 tire* 20 mm 66 603849 603827 603347 603749 603734 602784 603749

08-11 FXCW/C* 20 mm 66 603849 603827 603347 603750 603734 602784 603750

06 FXST with 200 tire 20 mm 70

00-05 FXST with 150 tire 1 1/8” 70 603828 602785

84-99 FXST 1 1/2” 70 603852 603830 603350 602787

YEAR

DYNA MODELS

07-17 FXD* 1” 66 603826 603346 603751 603732 603751

00-06 FXD 1 1/8” 70 603828 602785

84-99 FXD 1 1/2” 70 603852 603830 603350 602787

YEAR

FXR MODELS

00-01 FXR 1 1/8” 70 603828 602785

84-99 FXR 1 1/2” 70 603852 603830 603350 602787

* These models require an additional pulley spacer (sold seperatly) for proper installation. Please

add part# of the right hand column to the wheel order!

12.56

APPAREL

SEATS &

TOURING

‘Speed Star’

‘Super Charger’

FOOT

CONTROLS

HAND

CONTROLS

YEAR TOURING MODELS SPEEDSTAR

CHROME

SPEEDSTAR

'MIDNIGHT

SERIES'

04-06 FLHT/FLHR/FLTR Models 602842 602819

SUPER CHARGER NEED PULLEY

'MIDNIGHT SERIES' SPACER

LIGHTING

ELECTRICAL

00-03 FLHT/FLHR/FLTR Models 602844 602821 602869

84-99 FLHT/FLHR/FLTR Models 602844 602821 602869

84-99 FLHT/FLHR/FLTR Models

YEAR FLST SOFTAIL MODELS SPEEDSTAR CHROME SPEEDSTAR

'MIDNIGHT SERIES'



07-23 FLST Models with 150 tire* 603750

07-17 FLSTF Fatboy Models w/ 200 tire* 603749

00-06 FLST Models 602842 602819

84-99 FLST Models 602844 602821

YEAR FXST SOFTAIL MODELS SPEEDSTAR CHROME SPEEDSTAR

'MIDNIGHT SERIES'



07-15 FXST Models with 200 tire 603749

08-11 FXCW/C Models* 603750

00-05 FXST Models with 150 tire 602842 602819

84-99 FXST Models 602844 602821 602869

YEAR DYNA MODELS SPEEDSTAR

CHROME

SPEEDSTAR

'MIDNIGHT

SERIES'



07-17 All FXD Models* 603751

00-06 All FXD Models 602842 602819

84-99 All FXD Models 602844 602821 602869

YEAR FXR MODELS SPEEDSTAR

CHROME

SPEEDSTAR

'MIDNIGHT

SERIES'

00-01 All FXR Models 602842 602819

84-99 All FXR Models 602844 602821 602869

* These models require an additional pulley spacer (sold separately) for proper installation.



EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.57

EDITION 51

Revel

Virtue

PERFORMANCE MACHINE BELT SPROCKETS (PULLEYS)

PART# DESIGN/FINISH/DESCRIPTION FITMENT

892457 Revel Chrome 70Tx 20 mm 06 FXST/FLST with 200 mm tire

892476 Revel Platinum Cut 66T X 20 mm 07 FLSTF,FXST/B/C

892478 Virtue Platinum Cut 66T X 20 mm 07 FLSTF,FXST/B/C

892488 Revel Platinum Cut 66T X 1" 07 FLSTC,D,N,SC

892489 Revel Chrome 66T X 1" 07 FLSTC,D,N,SC

892490 Virtue Platinum Cut 66T X 1" 07 FLSTC,D,N,SC

892500 Revel Platinum Cut 66T X 1" 12-24 Softail, 07-11 FLSTC, 07-11 FLSTN, 08 FXCW, 08-11 FXCWC, 11 FXS, 07

892501 Revel Chrome 66T X 1"

FLSTSC

892502 Virtue Platinum Cut 66T X 1"

892498 Virtue Platinum Cut 66T X 20 mm 08-11 FLSTF with 200 mm tire

892498 Virtue Platinum Cut 66T X 20 mm 08-11 FXSTB/C

892470 Virtue Platinum Cut 70Tx1-1/8" 06 FXD

892480 Revel Platinum Cut 66T X 1" 07-17 FXD

892481 Revel Chrome 66T X 1" 07-17 FXD

12

892482 Virtue Platinum Cut 66T X 1" 07-17 FXD

892483 Virtue Chrome 66T X 1" 07-17 FXD

892485 Revel Chrome 72T X 28 mm 07 V-ROD except VRSCR

892507 Virtue Chrome 72T X 28 mm 08-17 V-ROD

12.58

APPAREL

SEATS &

TOURING

OEM Style Rear Belt Pulley

• OEM-Style

• Made from forged aluminum

• CNC machined and hardened teeth


• Available in a black or silver powder-coated finish with

contrast cut accents

FOOT

CONTROLS

HAND

CONTROLS

FAMILY FITMENT BELT TEETH OEM # BLACK SILVER

PULLEY NUMBER

WIDTH

Dyna 00-05 Dyna 1 1/8“ 70 40114-00 915862

Dyna 00-05 Dyna 1 1/8“ 70 40221-00 915861

Dyna, Softail, Touring,

FL Shovel


FL Shovel


FL Shovel


FL Shovel


FL Shovel, FX Shovel


FL Shovel, FX Shovel

82-84 FL Shovel, 84-99 Softail, 91-99 Dyna, 86-99 Touring,

61T Pulley


61T Pulley


For all HD Models with 65T Pulley


For all HD Models with 65T Pulley

82-84 FL Shovel, 86-99 Touring, 87-99 Softail, 85-94 FX

Model, 91-99 Dyna, For all HD Models with 70T Pulley

82-84 FL Shovel, 86-99 Touring, 87-99 Softail, 85-94 FX

Model, 91-99 Dyna, For all HD Models with 70T Pulley

1 1/2“ 61 40236-88 915857

1 1/2“ 61 40237-88 915858

1 1/2“ 65 40311-94 915855

1 1/2“ 65 40312-94 915856

1 1/2“ 70 40217-79 915854

1 1/2“ 70 40221-85 915853

Softail 00-06 Softail, (except 06 FXSTBI, 06 FXSTI, 06 FXSTSI) 1 1/8“ 70 40289-00 915860

Softail

07-11 Softail, (except 07-11 FLSTC, 07-11 FLSTN, 07 FLSTSC, 20 mm 66 40690-07 915869

07 FXSTD, 08 FXCW, 08-11 FXCWC, 10 FLSTSE, 11 FXS, 11

FLSTSE2)

Sportster 00-03 Sportster 1 1/8“ 61 40213-00 915874



LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH




DRIVELINE

Touring 00-03 Touring 1 1/2“ 70 915865

Touring 00-03 Touring 1 1/2“ 70 40217-00 915866

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

696796

696793 696792 696794

SHEETMETAL

INSTRUMENTS

& GAUGES

Extended Belt Sprocket Mounting Kit by Gardner for 07-24 Softail, 07-17 Dyna, 07 Touring Models

696796 Gardner belt sprocket mounting kit 2 1/2” long, knurled heads

Extended Belt Sprocket Mounting Kit for Custom Applications

696792 Sockethead 7/16” x 2 1/2” without washers

696793 Smooth allen head 7/16” x 2 1/2” without washers

696794 Hex head 7/16” x 2 1/2” without washers

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.59

EDITION 51

890503

640703

12

Super Spoke and OEM Style

Pulleys

These chrome pulleys are a great addition

to any motorcycle or custom with wire

wheels or solid mags on it. They come in

1 1/2" and 1 1/8" widths to fit all Big Twin

models from 85-06. Must use CC #640699

pulley adapter on 85-99 Timken bearing

wheels.

640701 Super Spoke 70-tooth 1 1/2" pulley



652129 Super Spoke 66-tooth 1” pulley

652130 Super Spoke 68-tooth 1” cush

drive pulley

640699 Pulley adapter ring for 84-99

wheels

Original Equipment Rear Belt

Pulleys

These are Original Equipment items.

Available with black or silver finishes for

Big Twins from 80-99.

75515 Black 70-tooth pulley (repl. OEM

40217-79A)

75516 Silver 70-tooth pulley (repl. OEM

40211-85A)

Chrome Steel Pulley Covers

for Twin Cam 88 Softail

Models

Fit Softail models with 70-tooth rear

pulleys from 00-06. One version matches

the Original Equipment rear wheels fitted

to all Deuce models and may be installed

on any Softail model if desired. Sold each.

25425 Fits Softail models (except Deuce

models) replaces OEM 91347-00

Sprocket Disc Brake Kit by

Tolle

Complete sprocket disc brake kit provides

a clean open look, as a separate disc brake

rotor is no longer needed. Kit includes

caliper, caliper bracket, disc rotor/sprocket

and hardware for installation. Frame

mounting bracket must be custom made.

Available with drilled or slotted sprocket.

Made in Sweden.

130230 Sprocket disc brake kit. 48-tooth

drilled sprocket

130231 Sprocket disc brake kit. 48-tooth

slotted sprocket 130230

Drilled Sprocket Brake Kit by

Kustom Tech

• One-Side brake caliper and rear

sprocket

• 2 pistons Billet aluminium caliper with

integrated bracket,

• 51 tooth stainless steel sprocked

• Welding tap and all the hardware

• Fits on left or right side with 3/4” or 1”

wheel axle

890503 Kit polished

890504 Kit black

Replacement parts

Black Caliper

Chrome Caliper

890505 Replacement 51 tooth stainless

steel sprocket

890506 Replacement brake pad set

890507 Caliper rebuild kit

12.60

APPAREL

SEATS &

TOURING

25290

Chrome Rear Pulley Covers

Premium-quality stamped steel covers fit

most stock pulleys used on most Big Twins

from 80-99, and Sportster models from 91-

03. Includes chrome-plated Torx hardware

and 3/8"-drive bit unless specified

otherwise.

8-Hole Covers for 70-Tooth Pulleys

25290 Outer cover with hardware

25426 Outer cover ONLY repl. OEM

91733-85


25325 Outer cover with hardware


25420 Outer cover ONLY for 5-speed

Sportster models from 91-03

(repl. OEM 40279-91)

25421 Outer cover ONLY for Big Twin

models from 80-99 (repl. OEM

40284-90)

Assorted Hardware

25427 Kit with bolts, washers and tool

25423 Hardware only. Includes bolts and

washers ONLY

Rear Wheel Sprocket and

Pulley Spacers

Billet aluminum spacers permit custom

alignment of rear wheel pulleys or

sprockets. Can be used with many wide

rear tire kits and frames. L84-99.

Natural Aluminum Finish

42693 .500”-thick

42694 .750”-thick

42695 .937”-thick

42697 1.250”-thick

Steel Rear Wheel Pulley and

Sprocket Spacer

Used on Big Twin models from 80-85 to

properly space the rear belt pulley to

the wheel. Also used to space the rear

sprocket on chain applications. Measures

.200" thick. Sold each.

19722 Replaces OEM 40932-81

36112

Rear Brake Drum Sprocket

and Rivet Kits

Includes sprocket, rivets, and dowel pins.

Late Hydraulic Sprocket Kit

19350 Fits 67-72 FL and FX (replaces

OEM 41470-67)

19322 Rivet and dowel set for CC

#19350 (1.020" x .190" rivets)

Early (Cast) Hydraulic Sprocket Kit

19514 Fits 62-66 FL and FLH models

(replaces OEM 41470-62)


#19514 (.630 x .195 rivets)

Mechanical Sprocket for Big Twin,

Sportster Models

51-tooth sprocket with rivets and dowels.

Fits 30-E58 OHV Big Twins and 54-78

Sportster and K models.

19349 Black. Sprocket kit (replaces OEM

41470-30)


#19349

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

‘The Correct’ Rear Wheel

Pulley Spacers CV2000

Made from 6061 T6 aluminum. Machine

finished. 683977 allows you to use a

late model 1 1/8 pulley on an early style

wheel. 683978 & 683979 spacers allow

the use of any combination of early

or late style wheel, pulley, or sprocket

combination.Patent pending.

NOTE: Spacers are designed to work on hubs with a .187

flange height.

‘The Correct’ Rear Wheel Pulley

Spacers

683975 Rear Wheel Pulley Spacers (00-23

Wheels) 1/4“ thick 00-17 Dyna,

00-24 Softail, 00-07 Touring,

00-20 Sportster

683976 Rear Wheel Pulley Spacer (84-99

Wheels) 1/4“ thick

683981 Rear Wheel Pulley Spacer (00-

23) .100 thick 00-17 Dyna, 00-24

Softail, 00-07 Touring, 00-20

Sportster

36113

36114

Rear Pulley and Sprocket

Hardware Kits

Chrome-plated sockethead hardware kits.

36112 Screw and washer kit for the

sprocket or pulley on Sportster

and Big Twins with cast wheels

36113 Screw and nut kit for the sprocket

on Sportster and Big Twin

models with spoked wheels

36114 Screw and nut kit for the pulley

on Big Twin models with spoked

wheels from 85-92

72059 Custom hardware kit with flat

sockethead screws, countersunk

washers and locknuts. Fits FL, FX

and Sportster models with chain

drive and spoked wheels from

73-92


sockethead screws and countersunk

washers. Fits FL, FX and

Sportster models with belt or

chain drive and cast wheels from

73-98


sockethead screws, countersunk

washers and locknuts. Fits FXWG

and FXRS models with belt drive

and spoked wheels from 85-99

Chrome-Plated Rear Sprockets

with Cutouts

Match your 84-91 stock brake rotors

with these brilliant chrome, oval cutout

sprockets. Features the rugged durability

that Custom Chrome sprockets are known

for.

Fits 4-speed Big Twins from 73-85 and

Sportster models from 79-81.

09772 51 tooth (repl. OEM 41470-78)

09771 49 tooth

09770 48 tooth

Fits FXR models (except FXRT and

FXRP) with rear chain drive from 82-

85.

09773 48 tooth

Fits Sportster models from 82-85.

09774 48 tooth (repl. OEM 41470-82)

Fits Sportster models from 86-92.

09775 48 tooth (repl. OEM 41470-86)

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.61

EDITION 51

Dayco Panther and Falcon-SPC Rear Drive Belts

Dayco ‘Panther’ Rubber Belts

Rides smoother and quieter than conventional belts because the parabolic tooth profile eliminates

trapped air between the belt and pulley. Patented graphite, self-lubricating, double nylon cover with

special stiflex fiber allows this belt to hold up to maximum torque and extreme temperatures.

Falcon-SPC Carbon Fiber Belts by BDL

BDL’s latest offering the Falcon-SPC (Sport Plus Carbon) rear drive belts incorporate the

latest in design and technology. These belts are carbon fiber reinforced which offers up to

33% more tensile strength than standard drive belts which makes these belts a must for

high-horsepower applications.

DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

ALL 14 MM TOOTH

TO TOOTH

DAYCO

PANTHER

ULTRA CORD

DRIVE BELTS

FALCON SPC

CARBON FIBER

DRIVE BELTS

20 MM BELTS

132 teeth 642680

133 teeth 642684

135 teeth 642688

24 MM BELTS

134 teeth n/a 916294

133 teeth 642697

1” BELTS

126 teeth 42892

130 teeth 42894 642676

132 teeth 42895 642679

133 teeth 42896 642683

135 teeth 642687

136 teeth 42897 642691

137 teeth 642692

139 teeth 642695

140 teeth 618477

1 1/8” BELTS

126 teeth 42772 642669

128 teeth 642673

130 teeth 42774 642675

132 teeth 42775 642678

133 teeth 44603 642682

135 teeth 642686

136 teeth 42776 642690

137 teeth 642696

12139 teeth 640078 642694

1 3/8” BELTS

150 teeth 640080

1 1/2” BELTS

126 teeth 42126 642668

127 teeth 42127

128 teeth 642672

130 teeth 642674

132 teeth 42132 642677

133 teeth 42133 642681

135 teeth 42135 642685

136 teeth 42136 642689

139 teeth 642693

FITMENT GUIDE: REAR DRIVE BELTS

1-1/2" WIDE BELTS

125 teeth Special Application

126 teeth

Fits 80-86 FXB, FXSB, FXWG: 82-84 FL (repl. OEM 40003-

79)

127 teeth

Special application also (International 89-92 Softail repl.

OEM 40010-89)

128 teeth

Softail 93-99 with 61T rear pulley (repl. OEM 40012-90)

Fits International 93-94 Softail and 91-93 Dyna models

130 teeth

Fits 95-99 Softail with 65 T rear pulley (repl. OEM 40017-

94)

132 teeth

Fits 86-04 Softail with 70 T rear pulley (repl. OEM 40023-

86) Fits International 89-93 FLT, FXR

133 teeth Fits 91-99 Dyna (repl. OEM 40015-90)

135 teeth Fits 85-96 FLT, FXR ( For shorter fit than stock)

136 teeth Fits 85-96 FXR, FLT (repl. OEM 40001-85)

139 teeth Fits 97-03 FLT (repl. OEM 40024-97)

1-1/8" WIDE BELTS*

125 teeth Fits 91-03 Sportster with 55 T pulley (repl. OEM 40038-91)

128 teeth Fits 91-03 Sportster with 61 T pulley (repl. OEM 40022-91)

132 teeth Fits 06- Dyna (International with 34-68 ratio)

133 teeth Fits 00- Dyna with 70 teeth pulley

135 teeth

Fits 00- domestic and international Softail with 70 teeth

pulley

136 teeth Fits 04 883-883C

137 teeth Fits 04-06 XL 1200R, 1200C, 1200L

139 teeth Fits 04-06 FLT

Note: All other sizes in 1-1/8" width are for custom applications, fitment of teeth size is the same as all of

the above.

1-3/8" WIDE BELTS

149 teeth Fits 04- VRSCA/B V-Rod

Fits 02-03 VRSCA/B V-Rod and (02- International VRSCA/B

150 teeth

V-Rod) (repl. OEM 40027-01)

1" WIDE BELTS**

Fits 07-11 FXSTD,FLSTC, FLSTSC, FXS, FLSTN,08-11 FXCW/

133 teeth

FXCWC

136 teeth 07-10 Sportster XL 883C, XL 883L, XL 883N, XL 883R

137 teeth Fits 07-08 Touring, 11-20 Sportster

140 teeth Fits 09-23 Touring with 34-68 ratio (40024-09)

Note: All other sizes in 1” width are for custom applications only fitment of teeth size is the same as all of

the above.

20MM WIDE BELTS

132 teeth Fits all 07 Softail with 32/64 drive ratio

133 teeth Fits 07 FXST,FXSTB, FXSTC, FLSTF

135 teeth Fits 06 Softail FXST/I/B/BI/S/SI Models

24MM WIDE BELTS

133 teeth Fits all 07 FLSTC, FLSTN, FLSTF

133 teeth

Fits all 12-17 Softail models (except 13-17 FXSB, FXSBS,

FXSBSE, FXSE, 12 Japan models)

132 teeth Fits Break-Out

1-1/8" WIDE BELTS FOR BUELL MODELS

656088 128 teeth Fits all XB12R, XB9SX, XB12Scg repl. OEM G0500.1AAG

656089 135 teeth Fits all XB12X, XB12XT, XB12Ss, XB12XP repl. OEM G0500.1AKE

HTD and Poly Chain are registered trademarks of the Gates Rubber Company. Note: The belts offered for sale on this

page have no warranty whatsoever.

12.62

APPAREL

Gates Poly Chain Rear Belt

• Gates is one of the OEM’s to HD with this type of belt

• Belt is made with polyurethane with carbon cord

• This belt is a standard workhorse

Circular Pitch: 14 mm, Unit: Each , Qty.: 1

FAMILY FITMENT BELT

PULLEY

WIDTH

TEETH OEM #

NUMBER

PART#

Custom Applications Custom Application 1“ 126 42749


SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS



Custom Applications Custom Application 1 1/2“ 125 42614

LIGHTING

Custom Applications Custom Application 1 1/8“ 126 42778

Dyna 00-06 Dyna, For Models equipped with 70T Pulley 1 1/8“ 133 40015-00 42782

ELECTRICAL

Dyna 06 Dyna, For HDI Models. 1 1/8“ 132 40594-06 42781

Dyna 07-17 Dyna, Except HDI Japan Models. 1“ 131 40046-07 916292

Dyna 07-17 Dyna, Only for HDI Japan Models.- 1 1/8“ 130 40048-07 42780

EXHAUST

Dyna 91-93 Dyna, 93-94 Softail 1 1/2“ 128 40012-90 43021

Dyna 91-99 Dyna 1 1/2“ 133 40015-90 43020

FL Shovel, FX Shovel, FX

Model

Indian Bagger, Indian

Cruiser, Indian Touring

Softail

82-84 FL Shovel, 80-82 FXB Sturgis, 80-85 FXWG, 83-84 FXSB 1 1/2“ 126 40003-79 43043

14-18 Chief Classic, 14-19 Chief Vintage, 17-19 Chief Dark Horse,

16-20 Chieftain Dark Horse, 16-21 Springfield, 17-18 Chieftain

Limited Elite, 18-20 Chieftain Classic, 18-21 Springfield Dark Horse,

19-20 Chieftain Limited, 20 Chieftain, 20-21 Chieftain Elite, 21-22

Chieftain Dark Horse , 21-22 Chieftain Limited , 22 Springfield ,

22 Springfield Dark Horse , 15-21 Roadmaster, 17-18 Roadmaster

Classic, 20 Roadmaster Elite, 20-21 Roadmaster Dark Horse, 21

Roadmaster Limited, 22 Roadmaster , 22 Roadmaster Dark Horse ,

22 Roadmaster Limited

00-06 Softail, (except 06 FLSTFSE2, 06 FXSTBI, 06 FXSTI, 06 FXSTSI),

Softail With Rear Tire Up To 150mm, with 70T Pulley.

1“ 152 3211168 990316

1 1/8“ 135 40307-00 42783

Softail 07-11 FLSTC, 07-11 FLSTN, 07 FLSTSC, 07 FXSTD, 08-11 FLSTSB, 08 1“ 133 40058-07 42732

FXCW, 08-11 FXCWC, 11 FXS

Softail 89-92 Softail 1 1/2“ 127 42615

Softail 95-99 Softail 1 1/2“ 130 40017-94 42616

Softail, Touring, FX

Model

86-93 Softail, 89-93 Touring, 89-93 FXR, 89-92 FXRS, 89 FXRSL, 89-92

FXRT, 90-93 FXRSSP, 90-93 FXRS_CON

1 1/2“ 132 40023-86 43045

Sportster 04 XL53C, 04-06 XL883, 05-06 XL883R, 05-06 XL883L, 05-06 1 1/8“ 136 40570-04 42784

XL(H)53C

Sportster 09-10 XL883N, 07-09 XL883, 08-10 XL883C, 07-10 XL883L, 07-10 1“ 136 40371-07 42748

XL883R, 07 XL53C


Sportster 91-96 Sportster, For Models with 55T Pulley. 1 1/8“ 125 43023

Sportster, Touring 11-20 Sportster, 07-08 Touring 1“ 137 40024-07 916293

Touring 04-06 Touring 1 1/8“ 139 40024-04 640077

Touring 09-24 Touring 1“ 140 40024-09 618477

Touring 97-03 Touring 1 1/2“ 139 40024-97 42879

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

Touring, FX Model 86-96 Touring, 86, 89 FXRSL, 87 FXRC, 89-94 FXR, 89-92 FXRS, 89-92


Touring, FX Model 86-96 Touring, 86, 89 FXRSL, 87 FXRC, 89-94 FXR, 89-92 FXRS, 89-92


Victory Bagger, Victory

Touring

10, 12-17 Cross Country, 12-17 Cross Country Tour, 15-17 Magnum,

16-17 Magnum X-1

Victory Cruiser 09-12, 16-17 Hammer S, 09-11 Hammer, 09-17 Vegas 8 Ball, 09, 11-

12, 16-17 Vegas, 10-16 Hammer 8 Ball, 13-17 Judge, 15-17 Gunner

1 1/2“ 135 43049

1 1/2“ 136 40001-85 43044

1 1/8“ 154 3211107 990318

1 1/8“ 147 3211102 990317

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.63

EDITION 51

Conti Rear Drive Belt

Thanks aramid tension cord and special synthetic rubber, the Continental timing belts for Harley-Davidson not only run for an

extremely long time, they are also particularly quiet.

• For extreme applications with highest forces

• High temperature resistance

• Maintenance free

• Resistant to simple oils, fats and petrol

Circular Pitch: 14 mm, Unit: Each , Qty.: 1

FAMILY FITMENT BELT

PULLEY

WIDTH

TEETH

NUMBER

OEM #

PART#



Dyna 00-06 Dyna 1 1/8“ 133 40015-00 921897

Dyna 07-17 Dyna 1 1/8“ 130 40048-07 921905

Dyna 91-99 Dyna 1 1/2“ 133 40015-90 921901

Dyna, Softail 91-93 Dyna, 93-94 Softail 1 1/2“ 128 40012-90 921911

FL Shovel, FX Shovel, FX

Model

82-84 FL Shovel, 80-82 FXB Sturgis, 80-85 FXWG, 83-84

FXSB

1 1/2“ 126 40003-79 921909

Softail 00-06 Softail, (except 06 FLSTFSE2, 06 FXSTBI, 06 FXSTI, 06 1 1/8“ 135 40307-00 921893

FXSTSI)

Softail 06 FLSTFSE2, 06 FXSTBI, 06 FXSTI, 06 FXSTSI 20 mm 135 40655-06 921903

Softail 07, 11 FXST, 07-09 FXSTB, 07-10 FXSTC, 07 FXSTSSE, 07 20 mm 132 40074-07 921902

12

FXSTD, 07-11 FLSTF, 10-11 FLSTFB, 11 FLSTSE2, 08 FXSTSSE2,

09 FXSTSSE3, 10 FLSTSE

Softail 07, 11 FXST, 07-09 FXSTB, 07-10 FXSTC, 07 FXSTSSE, 07 20 mm 133 40072-07 921896

FXSTD, 07-11 FLSTF, 10-11 FLSTFB, 11 FLSTSE2, 08 FXSTSSE2,

09 FXSTSSE3, 10 FLSTSE

Softail 07-11 FLSTC, 07-11 FLSTN, 07 FLSTSC, 07 FXSTD, 08-11 1“ 133 40058-07 921906

FLSTSB, 08 FXCW, 08-11 FXCWC, 11 FXS

Softail 12-17 Softail, (except 13-14 FXSBSE, 14-17 FXSB, 16-17 24 mm 133 400000001 921915

FXSE)

Softail 95-99 Softail 1 1/2“ 130 40017-94 921900

Softail, Touring, FX

Model

86-93 Softail, 89-93 Touring, 89-93 FXR, 89-92 FXRS, 89

FXRSL, 89-92 FXRT, 90-93 FXRSSP, 90-93 FXRS_CON

1 1/2“ 132 40023-86 921898

Sportster 04-06 XL1200C, 04-06 XL1200R, 06 XL1200L 1 1/8“ 137 40571-04 921894

Sportster 04 XL53C, 04-06 XL883, 05-06 XL883R, 05-06 XL883L, 05 1 1/8“ 136 40570-04 921899

XL(H)53C

Sportster

09-10 XL883N, 07-09 XL883, 08-10 XL883C, 07-10 XL883L, 1“ 136 40371-07 921908

07-10 XL883R


Sportster, Touring 11-20 Sportster, 07-08 Touring 1“ 137 40024-07 921891

Touring 04-06 Touring 1 1/8“ 139 40024-04 921895

Touring 97-03 Touring 1 1/2“ 139 40024-97 921890

Touring, FX Model 85-96 Touring, 89-94 FX Model, 86 FXRSL 1 1/2“ 136 40001-85 921892

12.64

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

Rear Sprockets for 00-23 Sealed Bearing Wheels

These sprockets feature the large diameter center hole found on 00-23 models(except 08-19 Touring, 02-17 V-Rod), so there is no

need to machine early model sprockets anymore for your chain conversion. All steel construction with a black or chrome finish.

Available in various sizes in either a flat or 6mm offset version.

Flat Sprockets

6mm Offset Sprockets

Chrome

688902 48T flat sprocket 00-Up



Black




Chrome

688907 48T offset sprocket 00-Up



Black




HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

RevPro

RevTech Chain Sprockets

RevTech sprockets are left side, flat & drilled for OEM HD bolt pattern with a 2.22 i.d. register for 00-23 applications (except 08-23

Touring, 02-17 V-Rod) and include a 1.985 reducer ring for installation on 84-99 applications. Machined from aircraft grade 7075 T6

aluminum and designed for use with 530 chain. Fits most models from 84-24.

TOOTH REVPRO POLISHED REVPRO 'MIDNIGHT SERIES'

48-Tooth 602788

51-Tooth 603748

RevPro

‚MIDNIGHT SERIES‘

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.65

EDITION 51

SPROCKET OFFSET

Sportster 1986-1992:

0mm

Sportster 1982-1985:

2mm

‘Stiletto’

‘Scorpion’

Sportster 1979-1981 and

Big Twins 1973-1985:

6mm

FXR/FXRS 1982-1985:

12mm

‘Scorpion’ and ‘Stiletto’ Directional Sprockets

Sensational styling is matched with precision engineering for

a perfect complement to our hot-selling RevTech wheels and

matching accessories like derby covers.

STILETTO

SCORPION

09792 09805 48 tooth for all FXR models with chain

drive (except FXRT, FXRP) from 82-85

(repl. OEM 40954-81)

09793 09806 48 tooth for all Sportster models from

86-92 (repl. OEM 41470-86T)

12chrome-plated

FXR

FX/XL

Rear Sprockets for Disc Brake Models

Top-quality rear sprockets in a variety of sizes. Available plain or

Fit 4-Speed Big Twins 73-85,

and Sportster Models 79-81

Plain (offset 6mm)

25644 48 tooth

25639 49 tooth

15912 51 tooth (repl. OEMs

41470-73 and 41470-

78T)

Chrome (offset 6mm)

84372 47 tooth

25692 48 tooth

25693 49 tooth

25694 51 tooth (repl. OEMs

41470-73 and 41470-

78T)

Chrome Sprockets for

Sportster Models from 82-

85 (offset 2mm)

09783 47 tooth


41470-82T)

09784 49 tooth

Chrome Sprockets for

Sportster Models from 86-

92 (Flat)

85134 46-tooth


41493-90T)


41470-86T)


41492-90T)

85138 51 tooth

Chrome Sprockets for FXR

Models (offset 12mm)

Fits 82-85 FXR models (except

FXRT, FXRP) with chain rear

drive.

25653 46 tooth

25654 47 tooth


40954-81)


40954-83)

RevTech Nickel-Plated O-Ring Chains

RevTech chains combine the high-strength and long wear of

O-ring design with great looks. Side plates are nickel-plated for

a custom appearance and to prevent rust and corrosion. With

top quality rubber O-rings, case hardened pins, and premium

bushings.

59550 530 x 102

59551 530 x 104

59552 530 x 106

59553 530 x 110

59554 530 x 112

59555 530 x 120

59556 RevTech nickel-plated O-ring master link

Note: Because O-ring chains are slightly wider than standard drive chains, it is imperative that

chain clearance to engine and frame components is checked after installation.

12.66

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

Heavy-Duty Chains

Available in various lengths.

17490 530 x 102

17491 530 x 104

17492 530 x 106

Master Links

17495 530 x 110

17496 530 x 112

17497 530 x 120

17498 Heavy-Duty clip-style master link (Sold each)

17499 Heavy-Duty clip-style half link

530ZVX Series Ultra Heavy-Duty Sealed O-Ring

Chains by EK Chain

The best chain on the market today for V-Twins – available in

colors! Great for customizing. Color choice allows chain to blendin

or stand-out from your bike. Not just another pretty face, EK

Ultra Heavy-Duty Chain stands-up to the demands of street and

strip use. Available in popular lengths, with either chrome or

colored side plates. Features include:

• Four-point pin riveting

• 10,560 lb. tensile strength

• Anti-kink solid bushings

• Solid reinforced rollers

• Factory packed with high-performance lube

• Extra strong x-style o-rings for superior sealing

• Clip-style master link included

• 530 x 110 Chain Size

081134 Gold

081144 Chrome

530 x 120 Chain Size

081135 Gold

081145 Chrome

081155 Red

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Diamond Chains

Diamond Chain Company has been manufacturing chains for over

100 years. Diamond Chain Company was the first to develop and

manufacture the dual roller chain.

Heavy Duty

A high quality chain produced through a superior manufacturing

process. Excellent for most applications at an economical price.

SIZE

530 x 100 33001

530 x 102 33002

530 x 104 33003

530 x 106 33004

530 x 110 33005

530 x 112 33045

530 x 120 33014

Master link each 33006

Spares kit 33038

HEAVY DUTY

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.67

EDITION 51

Motion Pro Quad

Stake Chain Rivet Kit

Use in conjunction with the

Motion Pro Jumbo Chain Tool.

This rivet kit will quad stake

chain, so it looks like a factory

job.

5008142 Complete kit

Master Link

Installation Tool

Turns the chore of installing

press-fit master link plates into

an easy job. Works equally

well on both standard and

O-ring chains.

20274 Master Link

Installation Tool

Motion Pro Jumbo Chain Tool Kit

• Ultra heavy duty tool for breaking and riveting roller chain

• Fits all 520, 525, 530 and 630 standard or O-ring chains, plus

industrial chains from #50-#80

• Pushes the pin completely through the chain link and rivets

the same size chain with the included rivet adapter

• Tool body may be mounted to a work bench for production

work, held in a vise or by the handle

• When bolted to a surface, an air or electric wrench may be

used to break chain

• Body bolt requires a 13⁄16" (21 mm) wrench and extractor pin

uses a 9⁄16" (14 mm) wrench or socket

5008135 Chain tool

5008935 Replacement pin

12

Diamond Chain

Breaker

Compression screw uses a

heat-treated steel tip to

press out chain pins. It’s

recommended that pins be

ground off flush to avoid

damaging the chain bushing.

33037 Replaces OEM 94480-

89T

Motion Pro Mini

Chain Press Tool

Tool box size and budget

priced tool for the installation

of press-fit side plates. Very

easy to use, and easily fits into

tool kit. Hex key wrench is

included.

5008070 Fits all 520 to 530

chains

Motion Pro Chain Breaker Tool

A tough tool designed for shop use, also makes a perfect tool

kit item. Properly used, the tool will break hundreds of chain

links without failure. Pushes chain link pin completely through

link. Handle folds to fit small tool pouch. Replaceable pin is heat

treated and hardened for long life. For shop use, tool may be

used with an air or electric impact wrench.

5008001 Fits all 420 to 630 chains (except EK/MVO/MVX chain)

5008002 Replacement pin

Motion Pro Masterlink

Pliers

• Simplifies installation

and removal of clip-type

masterlinks

• One tip is shorter and

notched to be placed on the

pin while the other is longer

to easily push the clip

5008230 Master Link Pliers

Belt Guard for Sportster S

• Steel cover

• Black coated

• With K-Logo lasered

Part#: 923425 , Fitment: 21-24 Sportster S RH1250S , Color:

Black Powder Coated , Material: Steel , Unit: Each , Qty.: 1

12.68

APPAREL

921526

SEATS &

TOURING

901912

901880

902123

86670

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

921525

ELECTRICAL

Belt Guard

The belt guards from Cult-Werk comes in black powder coated

versions. Cool and lean look for your bike and not boring like

the OEM counterpart. CNC-machined on the most modern 5-axis

CNC machining centers!

Color: Black Powder Coated , Material: Aluminium , Unit:

Each , Qty.: 1

PART# FITMENT DESCRIPTION

901912 07-17 Dyna Upper Guard

901880 08-17 Softail Upper Guard

901897 18-24 Softail, (except 19-20

FXDRS 114)

921525 18-24 Scout Bobber, 21-24

Scout Bobber Twenty, 18,

23 Scout Sixty, 23-24 Scout

Bobber Sixty

921526 18-24 Scout Bobber, 21-24

Scout Bobber Twenty, 18,

23 Scout Sixty, 23-24 Scout

Bobber Sixty

Upper Guard

Upper Guard

Lower Guard

86671 902124

Belt Guard

• Stainless steel belt guards

• Polished to a high luster finish

• Mounts to the OEM location points

Material: Stainless Steel , Unit: Each , Qty.: 1

FITMENT

FITMENT

NOTE

04-20 Sportster, (except 08-10

XR1200, 10-13 XR1200X)

18-24 Softail, (except 19-25

FXDRS 114)

84-17 Softail Fits models

with 65

tooth rear

pulleys

605601

BLACK POLISHED

902125 902126

902124 902123

86671 86670

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

901880 901897

12639

FORKS &

SHOCKS

Belt Guard

901912

PART# FITMENT COLOR

901880 08-17 Softail Powder Coated

901897

18-24 Softail, (except 19-20

FXDRS 114)

Powder Coated

901912 07-17 Dyna Powder Coated

Chrome Belt Guards for 5-Speed Sportster

Models

Made of heavy-gauge stamped steel, these guards keep your

belt clean and your bike looking good. Fits all 5-speed Sportster

models from 91-Up.

605601 Chrome upper Guard 04-20 Sportster, except 08-10 XR

1200X, 10-13 XR 1200X (repl. OEM 60367-04)

12639 Chrome upper guard XL 91-99 (repl. OEM 60381-91)

688696 Chrome lower guard 04-20 Sportster, except 08-10 XR

1200X, 10-13 XR 1200X (repl. OEM 60413-04)

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.69

EDITION 51

Belt Guard for FXDR

• Two-piece belt guard for FXDR 114

• Made of stainless steel with a flat black coating

• Easy and quick mounting to the original mounting points

(mounting material included)

Part#: 916666 , Fitment: 19-20 FXDRS 114 , Color: Flat Black

, Material: Stainless Steel , Unit: Each , Qty.: 1

12

Belt Guard for Nightster

• Stainless steel, laser cut, TIG welded

• Black matt powder coated

• Easy installation on stock OEM mounting points

• Mounting hardware included

• Made in Germany

Fitment: 22-24 Nightster RH975, 23-24 Nightster Special

RH975S , Color: Black Powder Coated , Qty.: 1

PART# DESCRIPTION UNIT

923389 Upper and Lower Kit

923390 Upper Each

923391 Lower Each

12.70

APPAREL

SEATS &

TOURING


The stock Sportster S belt guard ain’t a design highlight of this

otherwise spectacular bike. Rick’s Motorcycles has developed a

exchange belt guard which replaces „Bolt On“ the stock OEM

component. Rick’s belt guards are made from stainless steel and

finished in black powder coated surface finish. The kit includes

upper and lower belt guard.


Black Powder Coated , Unit: Each , Qty.: 1

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

916690

916686 916685

916693

INTAKE

ENGINE

916690 916689 916688 916691

GASKETS

Belt Guard for Softail Models

This belt guard delivers an easy but effective optic improvement to the standard version.

• Available in polished, gloss black or flat black

• Made from stainless steel

• Replacement for the original upper plastic belt guard

• Easy and quick mounting to the original mounting points (mounting material included)

Material: Stainless Steel , Unit: Each , Qty.: 1

FITMENT DESIGN FLAT BLACK GLOSS BLACK POLISHED

08-17 Softail Hole 918529 918528 918527

08-17 Softail Smooth 918526 918525 918524

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

08-17 Softail Square 918532 918531 918530

18-24 Softail, (except 19-20 FXDRS 114) Hole 916690 916689 916688

18-24 Softail, (except 19-20 FXDRS 114) Smooth 916687 916686 916685

FORKS &

SHOCKS

18-24 Softail, (except 19-20 FXDRS 114) Square 916693 916692 916691

SHEETMETAL

Hole Belt Guard for Sportster

• Featuring round laser cut outs

• Available in polished, gloss black or flat black

• Made from stainless steel

• Replacement for the original upper plastic belt guard

• Easy and quick mounting to the original mounting points (mounting material

included)

Part#: 916977 , Fitment: 10-20 Sportster , Color: Gloss Black Powder

Coated , Material: Stainless Steel , Unit: Each , Qty.: 1


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

12.71

EDITION 51

Belt Guard Bracket for Custom Swing Arms

This mounting kit allows the Thunderbike belt guard to be fitted

to swingarms where the bracket no longer fits. The 2-piece

clamp is precisely milled from aluminum to follow the contour of

the swingarm tube exactly. This ensures a secure and tight fit of

the belt guard.

• Made from aluminum

• Belt guard not included

Part#: 929317 , Fitment: 18-24 Softail, (except 19-20 FXDRS

114) , Fitment Note: For custom swingarms without OEM

bracket , Color: Black , Material: Aluminium , Unit: Kit ,

Qty.: 1

12

Belt Guard for M8 Softails

• Provides a visually perfect look

• Made from aluminium

• Simple installation

• Direct OEM replacement

Part#: 929316 , Fitment: 18-24 Softail, (except 19-20 FXDRS

114) , Color: Black Powder Coated , Unit: Each , Qty.: 1


The Thunderbike belt protection ensures a visually perfect cover

of the drive belt.

• Material: aluminum

• Black Matt

• Installation instructions / manual (DE/EN)


Gloss Black Powder Coated , Unit: Each , Qty.: 1

12.72

650327

APPAREL

12310

Chrome ‘Full Dress’ Chain Guards

Chrome reproductions of classic ‘Dresser’ rear chain guards

for 4-speed FL models from 63-84. Bolts directly onto 4-speed,

chain drive models (except Softail models) 71-85. Accurate to

the original with heavy-gauge construction, fully rolled edges,

inspection cover relief and front mount bushing.

12310 Standard chain guard (repl. OEM 60302-63T)

25548 Rubber grommet with a steel insert for use in mounting

Fat Bob tanks. Helps to isolate the tanks from vibration.

Pack of 10 (repl. OEM 11411)

650327

650325

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

Chain Guards for Hardtails and Rigid Frames

With mounting tabs for quick bolt-up adaptation to most

hardtails and custom rigid frames.

19386 Fits rigid framed Big Twins

12309

12315

Black Belt Guards for 5-Speed Sportster

Models

Tired of chrome? Want to make your own dark custom? These

black belt guards are a start. Combine them with many other

blacked out parts to finish the job.

650325 Black belt guard 91-99 XL

650326 Black drilled belt guard 91-99 XL

650327 Black drilled belt guard 04-20 Sportster, except 08-10

XR1200, 10-13 XR1200X

650328 Black belt guard, 04-20 Sportster, except 08-10 XR1200,

10-13 XR1200X

EXHAUST

INTAKE

ENGINE

GASKETS

12311

12306

TRANNY &

CLUTCH

12318

12317

690883

DRIVELINE

WHEELS, TIRES

& BRAKES

Chrome Chain Guards for Swingarm Models

Stock replacement and custom chain guards are precisely

engineered to bolt-on in minutes.

For FL and FX Models

12306 Custom chain guard for swingarm 4-speed Big Twins

(except Softail models) from 73-85

12309 Stock replacement for 4-speed FX models (except Softail

models) from 73-85 (repl. OEM 60302-73T)

12317 Stock replacement chain guard for Softail models from

84-85 (repl. OEM 60639-84)

For Sportster Models

12311 Stock replacement chain guard for 83-87 Sportster models

except 87 Hugger models (replaces OEMs 60375-83,

91777-85)

12318 Stock replacement chain guard for 88-90 Sportster models

and 87 Hugger models (replaces OEMs 60365-87,

60405-87)

For FXR Models

12315 Stock replacement chain guard for 82-84 FXR models

(except FXRT) and 86 FXR Super Glide models (replaces

OEMs 60640-86, 60607-81A)

894415

Belt Guard Custom

• Black powder coated

• For 04-20 Sportster, except 08-10 XR 1200, 10-13 XR 1200R

690883 Slotted

894415 Round holes

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


12.73

EDITION 51

605603

605602

‘Shorty’ Belt Guard for Softail Models

Show off more of your pulley and wheel with this chrome-plated

steel upper belt guard. Complete with chrome hardware and a

special T-nut that permits use with various pulley sizes.

12695 Fits all Softail models from 86-99

Chrome Lower Belt Guards for Softail Models

Chrome steel belt guards for Softail models.

Chrome Plain

605603 Lower belt guard fits Softail models from 07-17

605602 Lower belt guard fits Softails models from 00-06

632257

12314

12305

632258

12303

632259

12312

12313

Universal Chainguards

These chrome plated universal fit chainguards come with

mounting brackets. Available for left or right hand drive

fitment as well as a chainguard made specifically for use with

12the Paughco rigid Sportster frames we offer. Made in USA by

Paughco.

632257 Universal chain guard w/brackets. Left side

632258 Universal chain guard w/brackets. Right side

Chrome Upper and Lower Belt Guards

All Custom Chrome belt guards are made of heavily chromeplated

steel, and are designed for simple, bolt-on installation.

For FXR and FLT/FLHT Models

12314 Upper belt guard for FXR models from 85-86, and 87-92

FXRTs (repl. OEMs 60299-85, 91774-85)

12304 Upper belt guard for FXR models (except FXRT) from

87-94 (repl. OEMs 60297-87, 91739-87)

12312 Lower belt guard for FXR and Touring models from

85-01 (repl. OEM 60397-85)

677705 Lower belt guard in chrome for Touring models from

97-08 (repl. OEM 60491-02A)

677706 Lower belt guard in black for Touring models from 97-08

677707 Lower belt guard in chrome for Touring models from

09-24 (repl. OEM 60408-09)

677708 Lower belt guard in black for Touring models from 09-24

For FL and FX Models

12313 Upper belt guard for 4-speed models from 80-86 (repl.

OEMs 60388-82, 60380-79)

12303 Upper belt guard for Softail models from 86-92 (repl.

OEM 60533-86)

12305 Lower belt guard for Softail models with 70-tooth pulleys

from 86-94 (repl. OEMs 60366-89, 60362-86)

12.74

Section 12 Custom Chrome Europe Catalog 2026

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?