Section 14 Custom Chrome Europe Catalog 2025

14

FRAMES

EDITION 50

170377

170379

14

Chica Style Gooseneck Swingarm and Rigid Frames by Santee

Frames accept any Big Twin engine (except Twin Cam 88 engines) and the wider-than-stock swingarms permit the use of up to

200-series tires with a 1 1/2"-wide rear belt. The 38 degree Gooseneck gives these frames a vintage chopper look.

• Smooth rear axle adjuster blocks

• Accept most Original Equipment or aftermarket accessories, and late 87-99 rear brake calipers and master cylinders

• Take early-style coil brackets (48-early 82)

• 4-speed or 5-speed transmissions may be installed with the appropriate mounting plate

• Include rear axle and swingarm pivot shaft with bearings

Softail

170379 38° rake frame with no tank mounts for up to 200-series tire


Rigid


14.2

Attention! Articles marked with the APPROVAL-sign do not necessarily cover all H-D and Indian models and years. Before ordering please check if your bike is listed in

the approval certificate. Please contact your CCE dealer or our sales support. In case of any complaints we do not grant any warranty and will not withdraw those parts.

APPAREL

SINGLE DOWNTUBE

SEATS &

TOURING

FOOT

CONTROLS

650048

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

Santee 200 Single Downtube Chopper Frames

These Santee single downtube frames feature the same quality, strength and great style, like our popular Santee 250 Chopper

frames! Which gives us yet another opportunity to offer a unique custom frame that will satisfy your desire to customize.

• Made from 1 3/8"-diameter DOM tubing f or maximum strength

• Accept up to 200-series tires for a brawny appearance

650048 Rigid frame with 40° rake, 6" downtube stretch, 4" backbone stretch and no tank mounts, for up to 200 mm tire

650050 Single downtube rigid frame with 40° rake, 6" downtube stretch, 4" backbone stretch and no tank mounts, for up to 250mm

tire

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

Santee 250 Frame

Create the ultimate fat tired bike. Santee frame kits come with every-thing you need to get your project started. They’re designed to

accept Avon’s 250 x 18" rear tire (CC #1012093) and may also be used with Metzler’s 240 x 18" tire. They have all the features you’ve

come to expect from Santee including custom rear axle plates, boxed-in steering heads, and are designed to accept standard oil

tanks. Frame kits include axles and swingarm.

95112 Stock 30º rake, 0" downtube stretch, 0" backbone stretch

FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.3

EDITION 50

650192

Santee Single Downtube Rigid Frame for 86-03

Sportsters

This frame was designed to run a 86-03 Sportster engine and

will hold up to a 130mm rear tire with a belt or chain final drive.

Made in the U.S.A.

651236 30° rake, 0” Backbone, 0” downtube stretch single

downtube rigid frame without tank mounts for 86-03 XL

engines

650198

Santee 4-Speed Rigid Frames

These Classic Santee frames are the perfect start to any ‘Old

School’ build. Available with the classic look of either Wishbone

or Straight Leg style downtubes that Santee is known for.

Frames accept any Big Twin engine except Twin Cam (including

Strokers and Evolution motors). Frames are set-up for disc brakes

and include rear axle kit. Made in the USA.

Straight Leg Frames

650192 30º rake, 0" downtube stretch, 0" backbone stretch with

‘Flatside’ tank mounts

Wishbone Frames

650198 30º rake, 0" downtube stretch, 0" backbone stretch with

‘Flatside’ tank mounts

14

Replacement Axle Kit

650241 Replacement axle for Santee 4-speed rigid frames

Optional Oil Tanks

650224 Custom 3.5 qt. oil tank with push-on hose barbs

650225 Custom 3.5 qt. oil tank with push-on hose barbs and

spin-on filter

Santee Rigid Frame for 04- Rubber Mounted

Sportsters

This frame was designed to run a 04-Up rubber mounted

Sportster engine and will hold up to a 150mm rear tire with a

belt or chain final drive. Made in the U.S.A.

651237 30° rake, 0” Backbone, 0” downtube stretch rigid frame

without tank mounts for 04-Up rubber mounted XL

engines

14.4



APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

Rick’s Trick ‘n’ Roll 300 Fat Ass Kit with Approval

(T)Rick’n’Roll now means 300 series tyres in your stock Softail frame! Gone are the times of offset transmissions, offset primaries,

right side drives, frame alterations and difficult welding jobs. The swingarm of this new kit for TwinCam Softail models fits your

stock factory HD frame, with the 300 wheel perfectly centered. Power transmission is achieved through an intermediate drive shaft

which is positioned exactly in the pivoting center of the swingarm. As a result engine and transmission stay absolutely untouched,

which minimizes stress on the drive train and suspension forces on the rear belt. Since the primary housing also remains in its original

position, footpegs need not to be re-positioned and ground/cornering clearance is not affected. Further advantages are that the

motorcycle stays well balanced and that installation is quick and hassle-free. As with all Rick’s Motorcycles Kits the components are

developed, tested and Approval (with shown wheel designs only). The selection includes kits for OEM/custom brakes right or Drive

Side Brakes (= DSB) left with your choice of kits for center mount or side mount license plate. A matching rear fender made from

fibre glass compound is also available. Each kit comes complete with swingarm, intermediate shaft, two 1” wide Gates carbon fibre

belts, all necessary small parts and detailed instructions. A single manufacturer product! Made in Germany and patent-protected.

Because of the high amount of variations this is not a stock item. Please contact our sales team for a special order form which

includes all possibilities and fitment information.

Supersteve

Lector

Rodder

Trick ‘n’ Roll Swingarm Kits

619498 TnR Kit, for Twin Cam 88 cui 00-07

619499 TnR Kit, for Twin Cam 88 cui 00-07 with bracket for drive side brake system

619500 TnR Kit, for Twin Cam 88 cui 00-07 with brackets for drive side brake system

and threads for side mount plate

619501 TnR Kit, for Twin Cam 88 cui 00-07 with threads for side mount plate

619502 TnR Kit, for Twin Cam 96 cui

619503 TnR Kit, for Twin Cam 96 cui, with bracket for drive side brake system

619504 TnR Kit, for Twin Cam 96 cui, with brackets for drive side brake system


619505 TnR Kit, for Twin Cam 96 cui, with threads for side mount plate

619506 TnR Kit, for Twin Cam 08-10

619507 TnR Kit, for Twin Cam 08-10, with bracket for drive side brake system

619508 TnR Kit, for Twin Cam 08-10, with drive side brake system/side mount

plate

619509 TnR Kit, for Twin Cam 08-10, with threads for side mount plate

619510 TnR Kit, for Twin Cam 11-17

619511 TnR Kit, for Twin Cam 11-17, with bracket for drive side brake system

619512 TnR Kit, for Twin Cam 11-17, with brackets for drive side brake system


619513 TnR Kit, for Twin Cam 11-17 with bracket for side mount plate

Optional parts

619514 TnR Rear fender kit Rick‘s 300 GFK ShortCut RACE TC88

619515 TnR Rear fender kit Rick‘s 300er GFK ShortCut RACE TC96

619516 TnR Rear fender kit Rick‘s 300er GFK TC88

619517 TnR Rear fender kit Rick‘s 300er GFK TC96

619518 TnR License plate bracket

619630 TnR drive side brake system (caliper and mounting hardware)

Note: Wheel, brake rotor and pulley are not included in the package and must be ordered separately!


EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.5

EDITION 50

86112

Wide Drive Swingarm Kits for Dyna Models By

Rick’s for 260 Series Wheels with Approval

Precision manufacturing wide drive swingarm kits made in

Germany by Rick‘s. Nice looking tube design for 1” or 25 mm

axles. A Rick’s wide drive kit is in all kits included which makes

the rear wheel able to run perfect aligned in the middle. Also

included is a Gates rear belt with 131 teeth for 66 teeth pulleys.

With this kit you do not need to change any internals of your

transmission. Kits come with raw swingarm.

619419 Dyna models 06-11 with 1“ axle incl. offset kit

619420 Dyna models 06-11 with 25 mm axle incl. offset kit



Wide Swingarm Kits with Approval for

Sportster Models

Complete swingarm conversion kits for all Sportster models

from 87-03. Each kit comes with raw swingarm, offset sprocket,

stainless steel axle and spacers, aluminum chain adjusters and

shock studs. Because of the wider swingarm, the following

rim-tire combos are possible: 5.5" x 17" rim with Metzeler

180/55x17", 5.5" x 15" rim with Bridgestone 170/80x15" and 6.0"

x 16" rim with Avon AM23 200/60x16". All swingarm kits come

with Approval. Swingarm covers are not included.

86112 Wide stock-style swingarm kit

86111 Wide drag-style swingarm kit

86111

14

14.6



APPAREL

Wide Tire Swingarm Kit for

Softail

894448 Fits Softail models 91-06

Replacement parts

894969 Primary Spacer 1“ Offset-Raw

Alumium

894970 Chrome Belt Guard With Hardware

Kit

894971 Stainless Steel Splash Guard With

Hardware

894972 Black Swingarm

894973 3/4“ Axle with washer & nut, chrome

894974 Swingarm Spacer - Late Model

894975 Chrome Fender Struts With

Hardware

894976 Black Axle Caps With Screws

894977 11“ Raw Rear Fender Without Holes

894978 Black Floorbard Spacer With

Hardware

894979 Clutch Push Rod

894980 Starter Shaft Extension

894981 Pulley Spacer Steel

894982 5-Speed Main Shaft

894983 Starter Bolt

894984 Trans/Primary Spacer-Upper W/

Dowel Pin

894988 Primary O-Rings (Pk2)

894989 Transmission/Primary Spacer-Bolts

894990 Motor/Primary Bolts

894991 Starter Lock Plate & Retaining Ring

894992 Transmission/Primary Alum Spacer -

Lower

894993 5Th Gear Main Shaft

894994 5Th Gear Counter Shaft

894995 1“ Ext Shaft Extension & Nut Set

894996 Raw Early Model 91-99 Spacer

894448

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES


Wide Tire Swingarm Kit for

Softail

894449 Wide Tire Swingarm Kit, Softail

07-17 Fitment Note: 07 Softail

models need aditional spacer

894974, witch are not included in

the kit. Kit only with 3/4“ axle available

and it is not for ABS models.

Replacement parts

894997 Black Swingarm

894998 Axle With Washer & Nut Chrome

894999 Swingarm Spacer 08- Fxst Model

894970 Chrome Belt Guard With Hardware

Kit

894971 Stainless Steel Splash Guard With

Hardware

894974 Swingarm Spacer - Late Model

894975 Chrome Fender Struts With

Hardware

894976 Black Axle Caps With Screws

894977 11“ Raw Rear Fender Without Holes

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.7

EDITION 50

931652 931653

931652

14

Pro Performance Swingarm Kit

The Thunderbike Pro Performance Swingarm not only delivers a cool look but also reinforces the chassis while reducing weight.

• CNC milled aluminum

• Ready to install

• Compatible with 100 mm radial brake caliper and 292 mm brake disc

• Brake anchor or optional pulley brake system must be purchased separately

• Includes all mounting parts

• Note: Exhaust modifications may be required for aftermarket exhaust systems

Color: Raw , Certification: With Approval , Material: Aluminium , Unit: Kit , Qty.: 1

PART# FITMENT DESCRIPTION

931652 18-24 Softail, (except 18-19, 22-24 FXBR, 18-20, 22 FXBRS 114, 18, 22 FXBRS 114

ANX, 18-20 FLFB, 18-20, 22 FLFBS 114, 18, 22 FLFBS 114 ANX, 18, 22 FLFBS 114

ANV, 19-20 FXDRS 114, 21-22 FXBRS, 21, 23-24 FLFBS, 23 FLFBS ANV)

Narrow Frame: For rear wheels up to 6.0 x

18 and 200/55 R18 tires

931653 18-19, 22-24 FXBR, 18-20, 22 FXBRS 114, 18, 22 FXBRS 114 ANX, 18-20 FLFB, 18- Wide Frame: For rear wheels up to 9.0 x 18

20, 22 FLFBS 114, 18, 22 FLFBS 114 ANX, 18, 22 FLFBS 114 ANV, 19-20 FXDRS 114, and 260mm tires

21-22 FXBRS, 21, 23-24 FLFBS, 23 FLFBS ANV

14.8

APPAREL

SEATS &

TOURING

Swing Arm Bearing Kit

Unit: Kit , Qty.: 1

PART# FITMENT OEM #

921733 58-65 Panhead, 66-81 FL 9052

Shovel, (except 80-81 FLT,

81 FLTC), 71-84 FX Shovel,

85 FXWG

921732 86-99 Softail 9076

921734 00-24 Softail 9209

921735 02-24 Touring, 09-24 Trike 9208

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

Wide Tire Swingarm Replacement Parts For

Touring Models

Replacement parts

895000 Primary Spacer 12Mm Offset Raw For 894450

895001 Low Rear Fender Rubber Bumper Rail Guard For FLT

895002 Rear Swingarm

895003 1” Axle

895005 Primary Locking Tabs #33318-85

895006 Saddle Bag Support

895007 Extented Shaft Extension Crank Shaft Nut

895008 Extended Mainshaft

895009 Extended Main Drive Gear W/Bearing&Seal

895010 Spacer Top (Bend) With Dowel Pin

895011 Spacer Short

895012 Spacer Long For Use On Softail Models

895013 Raw Aluminum Spacer For Use On Dyna Models

895014 Spocket Spacer

895015 Clutch Pushrod

895016 Starter Motor Bolt

895017 Hex Bolt 5/16-18X2 1/2” & Washer & Space

F. Kodlin Racing Swingarm for Sportster

Models

The swingarm accomodates 200 rear tires and fits 04-20

Sportster, except 08-10 XR 1200, 10-13 XR 1200X. Comes black

powder coated with rear stainless steel axle, axle adjusters and

Approval.

894343 Racing swingarm

240 Swingarm Kit by Fred Kodlin for Dyna

Models

Solid wide end swingarm kit, designed for all HD Dyna models,

fits „Street Bob“, „Fat Bob“ and other Dynas. Allows the use of

240 rear tires without offset-kit (only modification necessary:

Shortening of the right OEM brake caliper bracket by 10 mm,

133 tooth Belt with 20 mm width required). Advanced chromed

3D design belt tensioners at the end of the swingarm. The

paintwork is protected by metal inserts, thus offering perfect

function and long lasting clean look. Comes raw finish.1“ axle.

683457 For 06-17 Dyna models

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.9

EDITION 50

888787

888789

888793

888790

888794 888791 888792 888795

Pulley Covers

Belt

Belt Protector

Primary Offset Kit For Twin Cam Models 08-17

This new primary offset kit allows for the installation of up to

240 wide rear tires in wider than stock swingarms without taking

the transmission apart and still use the stock final drive belt.

When converting to the 20 mm wide final drive belt or chain, up

to 250 wide rear tires can be installed. Includes spacers to offset

the primary 1/4” (6 mm), extended starter bolts, compensator

sprocket spacer, extended motor sprocket bolt, clutch spacer and

offset 32 tooth transmission belt pulley. Fits all 2014 to present

Touring, Dyna and Softail models except FXSB Breakout..

Complete Kit

888786 Primary offset kit for 08-17 Dyna, 08-17 Softail, except

08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17

FXSE, 08-16 Touring

Replacement Parts

888787 Motor/primary spacer-1/4” raw aluminum

888788 Starter bolts (4 needed) sold each

888789 Starter spacer, raw aluminum

888790 Compensator spacer stainless steel

888791 Motor sprocket bolt

888792 Clutch spacer stainless steel

888793 Offset belt sprocket (32 Teeth)

888794 Inner/outer primary bolts and washers

888795 Transmission/primary spacer

Offset Pulleys

Rick’s Offset Kits for Sportster Models

Fits 05-20 Sportster, except 08-10 XR1200, 10-13 XR1200X

14

Offset Pulleys 29 Teeth

Made of steel, lasting longer compare to the aluminum versions.

890935 17 mm for 200/210 mm rear tires

890936 24 mm for 240 mm rear tires

Pulley Covers (matching to Pulleys above)

890938 For 17 mm offset pulley

890939 For 24 mm offset pulley

Belt Protector (matching to Pulleys above)

Fits Rick‘s offset pulleys and completes the look. CNC made

protector matching the OEM design with a opening for the

pulley with pulley cover.

890940 Belt protector, fits all Rick’s offset pulleys above, black

coated

Gates Rear Belt

890941 137 teeth, 20 mm (Kevlar®/Carbon reinforced)

DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and

Company.

Offset Parts

14243 1" extended for Big Twin models from 85-94 FX Model,

91-05 Dyna, 91-06 Softail, 85-06 Touring

14.10



APPAREL

SEATS &

TOURING

688207 688208 688206 12222

14241

FOOT

CONTROLS

Compensating Sprocket Assemblies

Replace your worn out Original Equipment unit with one of these complete assemblies.

Complete Assemblies

Each of these assemblies includes the shaft extension, cover with springs, sliding cam, engine nut and sprocket.

14241 25-tooth for all Big Twin models from 94-06 (except 06 Dyna)

14235 24-tooth for Softail models from 91-93

14238 24-tooth for Softail models from 85-90

14231 24-tooth for 5-speed rubber-mount models from 85-90

Cover Assemblies with Springs

Available for most models from 85-05

14233 Fits 5-speed rubber-mount models from 85-90 (repl. OEM 40267-85)

14240 Fits Softail models from 85-90 (repl. OEM 40384-83A)

14237 Fits all Big Twins from 91-05 (repl. OEM 40384-91)

Compensating Sprocket Components

Restore your compensating sprocket to peak performance. Fits most Big Twins with primary chains from 70-05.

Sliding Cams for Big Twins

12222 Fits most models from 70-83 (repl. OEM 40299-70)

12764 Fits all models from 85-05 (repl. OEM 40299-83A)

688207 Fits Dynas 06-11, Touring models from 07-10, Softails 07-11 except Rocker (repl. OEM 40333-06)

Sprocket Nut for Big Twins from 70-90

12112 Stock length (repl. OEM 40392-70)

14246 1/2" extended (repl. OEM 40392-70)

14245 1" extended (repl. OEM 40392-70)

Sprocket Nut for Big Twins from 91-06

12078 Stock length (repl. OEM 40392-91)

14248 1/2" extended (repl. OEM 40392-91)

14247 1" extended (repl. OEM 40392-91)

14771 1-1/2" extended (repl. OEM 40392-91)

Compensating Sprockets for Big Twins from Late 70-86

12218 22-tooth (repl. OEM 40280-70)

12232 23-tooth (repl. OEM 40282-70)

12233 24-tooth (repl. OEM 40275-70))

Compensating Sprockets for Big Twins from 85-11

14234 24-tooth for Softail models 85-93 and 5-speed rubber-mount models from 85-93 (repl. OEM 40269-85A)

14242 25-tooth for all Big Twin models from 94-05 (repl. OEM 40308-94)

Sprocket Shaft Extensions

For 4-speed Big Twins from late 70-83, 5-speed Big Twins from 80-E84 and Softail models from 84-90 (repl. OEM 40375-70).

20306 Stock length for 4-speed Big Twins from late 70-83, 5-speed Big Twins from 80-E84 and Softail models from 84-90 (repl. OEM

40375-70)

For Softail models from 91-11 and 5-speed rubber-mount Big Twin models from 85-06 (repl. OEM 40266-85).

688208 Stock length for Dynas 06-11 and Touring models from 07-10, Softails from 07-11 except Rocker (repl. OEM 40297-06)

14232 Stock length for Softail models from 91-06 and 5-speed rubber-mount Big Twin models from 85-06 (repl. OEM 40266-85)

14244 1/2" extended for Big Twin models from 85-06 (repl. OEM 40266-85)

14243 1" extended for Big Twin models from 85-06 (repl. OEM 40266-85)

14772 1-1/2" extended (for Big Twin models from 85-06)

14196 45 mm (1-3/4") extended (for Big Twin models from 85-06)

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.11

EDITION 50

HKC Axle Screw

681866 HKC retro style rear axle adjuster

screws for rigid frames 3/8 UNF

681867 HKC retro style rear axle adjuster

screws for Softail style frames 3/8

UNC

Swingarm Pivot Components

Manufactured from high-quality materials

for all factory and aftermarket swingarms.

Sold each.

For Softail Models from 84-99

95044 Swingarm pivot bearing and

retaining clip for all Softail models

from 84-99 (repl. OEM 9076)

Offset Transmission Plates

These 1-inch offset mounting plates

for 5-speed Softail transmissions, make

assembly of Wide Drive swingarm or extra

wide rigid-framed customs a snap. The

hot set-up for building that extra-wide

ride.

17285 Chrome mounting plate

17286 Raw steel mounting plate

Swing Arm Axle Cover for

Nightster and Sportster S

• Easy to mount

• Set (2 pieces)

• Milled aluminum

• Black

Color: Black Powder Coated ,

Material: Aluminium , Unit: Pair , Qty.:

1

PART#

FITMENT

923630 21-24 Sportster S RH1250S

923615 22-24 Nightster RH975, 23-24

Nightster Special RH975S

Swingarm Bumpers

For stock replacement or custom

applications. Replaces OEM 11451, and fit

all Softail models from 84-99.

Aftermarket Bumpers

695002 Sold each

Rear Wheel Pulley Spacers

Billet aluminum spacers permit custom

alignment of rear wheel pulleys. Can

be used with many wide rear tire kits

and frames. Will not fit 00-Up wheel

assemblies with sealed bearing style hubs.

14

Natural Aluminum Finish for 73-99

42693 .500"-thick

42694 .750"-thick

42695 .937"-thick

42697 1.250"-thick

High Performance Top

Stabilizer for Dyna Models

Twin Power’s Top Stabilizer Link allows

precise powertrain alignment, perfect for

high-performance use. Rubber bushings

reduce vibration.

Color: Black , Unit: Each , Qty.: 1

PART#

FITMENT

919803 04-17 Dyna

919802 95-03 Dyna

Swingarm Stiffener Kit by

Rivera

The Stiffey helps to solve the decades long

problem of instability in 80-08 rubber

mount FL models. It installs super easy

and will make your ride safer by helping

control rear steering. Made in the USA.

667557 Stiffener kit

14.12

680028

APPAREL

SEATS &

TOURING

680037

FOOT

CONTROLS

The ‘Touring Link’ by

Progressive Suspension

Finally an inexpensive and easy to install

solution to the handling challenges faced

by most Touring models. The brace does

not hang below the frame so it will not

cut into your ground clearance. Helps

keep motor and swingarm assembly

aligned with chassis without introducing

unnecessary vibration to the rider.

680037 Fits 93-08 Touring models

680028 Fits 09-13 Touring models

26397

270144

Oil Tank Mounting Kits

For Softail Models

Includes chrome front and rear brackets to

mount oil tanks to most aftermarket and

Original Equipment Softail frames.

26397 Complete oil tank mounting kit

270144 Rear bracket only, chrome

(replaces OEM 62704-84)

270147 Front bracket only, chrome

(replaces OEM 62707-84)

Weld-On Frame Tab

Weld-on right hand side frame mounting

tab for all late model 4-speed Big Twins

without the Original Equipment mounting

tab.

17503 Sold each

Chrome Swingarm Pivot Bolts

for Softail Models

Chrome hex head swingarm pivot bolts.

Grade 8 bolts measure 3/4"-16 x 3"-long.

Fit Softail models from 84-99. Sold in

pairs.

84378 Swingarm Pivot Bolt Spacers

Swingarm Pivot Bolt Spacers

for Softail Models

Fit Softail models from 87-99. Pack of 10.

84602 Swingarm Pivot Bolt Spacers

Motor Mounts for Dyna

Models by Custom Cycle

Engineering

Custom Cycle Engineering introduces two

new products to align your power train

and reduce engine vibration.

Front Engine Bracket

Allows the rider to dial in the engine

to perfect power train alignment.

Eliminating the guess work by sliding the

engine left or right using the built in hash

marks.

889116 Front engine bracket 99-17 Dyna

Top Stabilizer Link

This new link is rubber isolated,

adjustable and greatly reduces vibration

especially at high speeds. This replaces

the stock link which is metal to metal

from the top motor mount to the frame.

Reduce engine vibration and align the

power train with this link. The two items

together will get your Dyna driving

straight and smooth down that road.

889117 Top stabilizer link for 04-17 Dyna

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

Stainless Steel Splash Guard

by Pro-One

The perfect replacement for the stock plastic

part for a custom look.

65429 Fits 5-speed Softail models from

86-99

Swingarm Upgrade Kit for

FXR/FLT Models

Specifically designed to upgrade the

quality and feel of the driveline on your

FXR or Touring model bike. These 7-pcs

convert the old style OEM parts to a

high-tech spherical bearings with CNC-

Machined precision spacers and collars.

Made in the U.S.A.

651435 7-pc swingarm upgrade kit for

80-01 FXR & Touring models


INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.13

EDITION 50

Club-Style Crash Bar

• For Softail models with narrow frames

• Replacement sliders in various colors available separately

• Black sliders included

• Steel, black coated

• Welded on special welding jigs

925229 Width: 900 mm Rear

14

• Mounting hardware included

• 3 variants available:

• Front crash-bar 820 mm width, recommended for Low Rider ST

• Front crash-bar 720 mm width

• Rear crash-bar 900 mm width

Fitment: 18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 18-20 FXFB, 18, 20 FXFBS 114, 18-20 FXLR,

18-20 FXBB, 18-24 FLSB, 19-20 FLHC 114, 19 FXFB 114, 20-24 FXLRS, 20-24 FXST, 21-24 FXBBS, 21-24 FLHCS, 21-24 FXFBS,

22-24 FXLRST, 22 FXRST, 23 FLHCSANV , Color: Black Powder Coated , Material: Steel , Unit: Each , Qty.: 1

PART# FITMENT NOTE DESCRIPTION POSITION

930428 CCE# 925228 recommended for Low Rider ST Width: 720 mm Front

930429 CCE# 925228 recommended for Low Rider ST Width: 820 mm Front

14.14

Club-Style Crash Bar Replacement Aluminium Sliders

• Replacement Sliders for Rick‘s Clubstyle Crash-Bars

• Different colors available

• Sold in pairs

• With Rick‘s Motorcycles lettering

Field of Application: Rick‘s front and rear Club-Style Crash Bars , Material: Aluminium , Unit: Pair , Qty.: 1

PART#

COLOR

925301 Gloss Blue, Anodized

925302 Gloss Gold, Anodized

925303 Gloss Red, Anodized

925304 Gloss Black, Anodized

925305 Aluminium

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

923419

LIGHTING

ELECTRICAL

EXHAUST

926645

926644

INTAKE

Club Style Engine Guard for M8 Softail with Oil Cooler Protection

Club Style engine crash bars for M8 Softail models. The front crash bar additionally features a solid frame around the oil cooler.

Fitment: 18-21 FLSL, 18-20 FXFB, 18, 20 FXFBS 114, 18-20 FXLR, 18-20 FXBB, 18-24 FLSB, 19 FXFB 114, 20-24 FXLRS, 20-24

FXST, 21-24 FXBBS, 21-24 FXFBS, 22-24 FXLRST , Fitment Note: Fits models with mid controls, will not fit with forward

controls , Position: Front , Unit: Each , Qty.: 1

PART# COLOR POSITION

923419 Black Powder Coated Front

926398 Bronze Powder Coated Front

926645 Black Powdercoated Rear

926644 Bronze Powdercoated Rear

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Engine Guard Chaps for HD Touring

Block moisture, cold air, wind and debris with these form-fitted Engine Guard Chaps for H-D Touring models. The durable, weatherresistant

smooth polyurethane vinyl material offers the appearance of leather without the required routine maintenance. Modern

updates to an old school design foundation make the Kuryakyn Engine Guard Chaps for H-D a versatile wind-blocking aid with

integrated pockets on both sides for small item storage.

• UV- and weather-resistant smooth PU vinyl material

• Integrated water-resistant zippered pocket and separate hook-&-loop storage pouch

• Cut-outs leave portion of engine guard exposed to retain use of highway pegs

• Hassle-free secure installation via high-strength hook-&-loop straps and snap button straps

Part#: 775266 , Fitment: 97-24 Touring, 09-24 Trike , Fitment Note: Fits standard engine guards without lower fairings ,

Color: Black , Unit: Pair , Qty.: 1

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.15

EDITION 50

14

Club-Style Crash Bar

An absolute must for every club style bike is a crash bar, not only for the perfect design but also for maximum safety. Increased

protection of tank, fairing and other components in case of of a fall without affecting the ride and cornering quality. The modelspecific

fastening material guarantees a secure and Easy mounting on the original mounting points without drilling or similar.

• Made from steel

• High gloss powder coated

• Including mounting material

• German Made

• Fits models with center footpegs

• Will not fit models with forward pegs

Material: Steel , Qty.: 1

PART# FITMENT FITMENT NOTE COLOR POSITION LENGTH

MM

921434 91-17 Dyna Fits models with mid

controls, will not fit

with forward controls

921433 18-24 Softail, (except 18-19, 23-24 FXBR, 18-20 FXBRS

114, 18 FXBRS 114 ANX, 18-20 FXFB, 18, 20 FXFBS

114, 18-24 FLSB, 19 FXFB 114, 21-22 FXBRS, 21-24

FXFBS)

930911 18-24 Softail, (except 18-19, 23-24 FXBR, 18-20 FXBRS

114, 18 FXBRS 114 ANX, 18-20 FXFB, 18, 20 FXFBS

114, 18-24 FLSB, 19 FXFB 114, 21-22 FXBRS, 21-24

FXFBS)

Gloss Black

Powder Coated

Gloss Black

Powder Coated

Bronze Powder

Coated

921435 18-24 Softail Gloss Black

Powder Coated

930912 18-24 Softail Bronze Powder

Coated

UNIT

Front 760 Each

Front 800 Each

Front 800 Each

Rear 200 Pair

Rear 200 Each

14.16

APPAREL

930059 930060

SEATS &

TOURING

930061 930062

FOOT

CONTROLS

HAND

CONTROLS

930059

LIGHTING

ELECTRICAL

Club Style Crash Bar

• Easy to installation

• Supplied with black plastic sliders

• Optional golden slider-spacers and milled aluminum sliders available

Unit: Each , Qty.: 1

FITMENT POSITION GLOSS BLACK

POWDER COATED

18-20 FXLR, 18-20 FXBB, 20-24 FXST, 20-24 FXLRS, 21-24 FXBBS, 22-24 FXLRST, 22

FXRST

STAINLESS

STEEL

Front 930059 930060

18-24 Softail Rear 930061 930062

EXHAUST

INTAKE

ENGINE

GASKETS

930064

930063

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

930064

930065

FORKS &

SHOCKS

SHEETMETAL

Club Style Crash Bar Sliders

• Sold in pairs

• Plastic replacement or milled aluminium available

Field of Application: Fits Cult Werk (front, rear) Club Style

crash bars , Unit: Pair , Qty.: 1

PART# COLOR DESCRIPTION MATERIAL

930064 Black V1, Replacement Plastic

(Length: 50 mm)

930065 Black,

Anodized

V2, Aluminium with Cult-

Werk Clubstyle Design Milling

(Length: 45 mm)

Aluminium

Club Style Crash Bar Slider Spacers

• Sold in pairs

• Fits front and rear Cult Werk Club Style Crash Bars

• Elevates the look of your Club Style ride

Part#: 930063 , Field of Application: Fits Cult Werk (front,

rear) Club Style crash bars , Color: Gold, Anodized ,

Description: Length: 15 mm , Material: Aluminium , Unit:

Pair , Qty.: 1

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.17

EDITION 50

Brawler Front Crash Bar Kit

From drifting and rolling burnouts to poppin’ wheelies and

hitting 12 O’clock, there’s a generation of riders on the scene

and they’re here to stay! Whether you are new to the game

or a seasoned pro stunter, Burly designed the Burly Brand

Brawler Kits with the highest quality steel and finished off with

replaceable Delrin sliders for a look that kills and quality that

defends the bike in the event of a wipeout. Protect your bike in

style with Burly Brand’s Brawler Kits!

• TIG welded for max durability

• Black powder coat finish

• Replaceable Delrin sliders

Color: Black Powder Coated , Position: Front , Unit: Kit ,

Qty.: 1

PART# FITMENT FITMENT NOTE

930851 18-24 Softail Does not fit models with

forward controls

930853 09-24 Touring

Brawler Rear Crash Bar Kit

From drifting and rolling burnouts to poppin’ wheelies and

hitting 12 O’clock, there’s a generation of riders on the scene

and they’re here to stay! Whether you are new to the game

or a seasoned pro stunter, Burly designed the Burly Brand

Brawler Kits with the highest quality steel and finished off with

replaceable Delrin sliders for a look that kills and quality that

defends the bike in the event of a wipeout. Protect your bike in

style with Burly Brand’s Brawler Kits!




Color: Black Powder Coated , Position: Rear , Unit: Kit ,

Qty.: 1


930852 18-24 Softail Models with ST-Bags

require use of CCE#930850

930854 09-24 Touring

14

Brawler Crash Bar ST-Style Bag Adapter Kit

This spacer kit is designed for seamless integration of the Brawler

Kit when using ST-style bags and ensures optimal fitment,

providing a smooth and hassle-free installation.

• Kit includes 1 spacer and 1 longer mounting screw

Part#: 930850 , Fitment: 22-24 FXLRST, 22 FXRST , Field of

Application: Fits Softail Models equipped with OE ST-Bags

, Unit: Kit , Qty.: 1

Brawler Crash Bar Replacement Slider Kit

• Delrin plastic

Field of Application: Replacement Slider for Burly Brand

Brawler Crash Bars , Color: Black , Unit: Kit , Qty.: 1

PART# POSITION

924546 Front

924547 Rear

14.18

APPAREL

SEATS &

TOURING

FOOT

CONTROLS

924543

HAND

CONTROLS

LIGHTING

ELECTRICAL

924542

EXHAUST

924544

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

924545

WHEELS, TIRES

& BRAKES

FRAMES

Brawler Front and Rear Crash Bar Kit

From drifting and rolling burnouts to poppin’ wheelies and hitting 12 O’clock, there’s a generation of riders on the scene and they’re

here to stay! Whether you are new to the game or a seasoned pro stunter, Burly designed the Burly Brand Brawler Kits with the

highest quality steel and finished off with replaceable Delrin sliders for a look that kills and quality that defends the bike in the event

of a wipeout. Protect your bike in style with Burly Brand’s Brawler Kits!



• 7 Gauge Mild Steel Mount/Gussets


Color: Black Powder Coated , Position: Front, Rear , Unit: Kit , Qty.: 1


FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

924543 04-20 Sportster

924542 06-17 Dyna

924544 18-24 Softail, (except 18-19, 23-24 FXBR, 18-20 FXBRS 114, 18 FXBRS 114

ANX, 18-20 FXFB, 18, 20 FXFBS 114, 18-24 FLSB, 19 FXFB 114, 21-22 FXBRS,

21-24 FXFBS)

924545 09-24 Touring, (except 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLHX, 24 FLTRX, 24

FLTRXSTSE)


Models with ST-Bags require use of

CCE#930850; does not fit models with forward

controls

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.19

EDITION 50

925171

642904

925172

Curved Engine Guard

• Retro style engine guard

• Perfect protection with nice shaped curves

• Includes mounting set

Fitment: 00-03, 07-12, 14-17 FLSTC, 00-03 FLSTS, 00, 03-

12, 14-17 FLSTF, 01-06 FLSTCI, 01-03 FLSTSI, 01-06 FLSTFI,

05 FLSTFSE, 05, 07-12, 14-17 FLSTN, 05-06 FLSTSCI, 05-06

FLSTNI, 06 FLSTFSE2, 06 FLSTI, 07 FLSTSC, 08-11 FLSTSB,

10-12, 14-17 FLSTFB, 10 FLSTSE, 11 FLSTSE2, 12 FLSTSE3, 13

FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 103, 13 FLSTFB 103,

13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSTFBS , Unit: Each ,

Qty.: 1

PART#

COLOR

642903 Chrome

642904 Black

Chopped Front Highway Bar

Achieve a sophisticated and lowered appearance for your custom

bagger with the chopped engine guard. This guard combines a

sleek, streamlined look with optimal functionality, providing a

distinctive twist to your bike‘s style.

• Includes mounting Hardware

Fitment: 16-22 FLHR, 15-18, 20-21, 23 FLHXS, 18-24 FLHRXS,

14, 18-23 FLHX, 18 FLHX ANV, 18 FLHXS ANX, 22 FLHX ,

Fitment Note: Does not fit with lower fairings , Unit: Kit ,

Qty.: 1

PART# COLOR OEM #

925171 Chrome 49000105

925172 Black 49000114

925173

925173

14

925174

925174

Rear Saddlebag Guards

Reproductions of the Original Equipment bars constructed from steel tubing and available in

either a chrome-plated or gloss black powder coated finish.


Fitment Note: For models, equipped with saddlebags, relocation kit is needed , OEM #: 49261-00A , Unit: Kit , Qty.: 1

PART# FITMENT COLOR

925173 00-03, 07-12, 14-17 FLSTC, 00-03, 05 FXSTB, 00-03 FXST, 00-03 FXSTS, 12, 14-17 FLS, 11-12 FXS, 13 FLSTC 103, 13

FLSTC 103 ANV, 13 FLS 103, 13 FXS 103, 16-17 FLSS, 04-06 FLSTCI, 04-05 FXSTI, 04-05 FXSTSI, 04 FXSTBI

925174 00-03, 07-12, 14-17 FLSTC, 00-03, 05, 07-09 FXSTB, 00-03, 07, 11-15 FXST, 00-03 FXSTS, 08-10 FXSTC, 12, 14-17 FLS,

11-12 FXS, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLS 103, 13 FXS 103, 16-17 FLSS, 04-06 FLSTCI, 04-06 FXSTI, 04-06

FXSTSI, 04, 06 FXSTBI

Chrome

Black

14.20

APPAREL

642898

642900

642905

642907

SEATS &

TOURING

FOOT

CONTROLS

642909

925169

925169

925170

HAND

CONTROLS

LIGHTING

Front Highway Bar

Reproductions of the original equipment bars constructed from 1-1/4” steel tubing and available in either a chrome-plated or gloss

black powder coated finish. Hardware included.


Qty.: 1

PART# FITMENT COLOR OEM #

642897 09-24 Touring, (except 24 FLHX, 24 FLTRX, 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLTRXSTSE), 09-24 Trike Chrome

642898 09-24 Touring, (except 24 FLHX, 24 FLTRX, 23-24 FLHXSE, 23-24 FLTRXSE, 24 FLTRXSTSE), 09-24 Trike Black 49050-09

642899 97-08 Touring Chrome

642900 97-08 Touring Black

642905 00-03 FXSTS, 00-03, 07 FXST, 00-03, 05, 07 FXSTD, 00-03, 07-09 FXSTB, 01-02, 04, 06 FXSTBI, 01-02, Chrome

04-06 FXSTSI, 01-06 FXSTDI, 01-02, 04-06 FXSTI, 07-10 FXSTC, 07 FXSTSSE, 08 FXSTSSE2, 09 FXSTSSE3,

11-12 FXS, 13 FXS 103, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE

642906 00-03 FXSTS, 00-03, 07 FXST, 00-03, 05, 07 FXSTD, 00-03, 07-09 FXSTB, 01-02, 04, 06 FXSTBI, 01-02, Black

04-06 FXSTSI, 01-06 FXSTDI, 01-02, 04-06 FXSTI, 07-10 FXSTC, 07 FXSTSSE, 08 FXSTSSE2, 09 FXSTSSE3,

11-12 FXS, 13 FXS 103, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE

642907 86-87 FLST, 88-99 FLSTC, 90-95, 97-99 FLSTF, 93-96 FLSTN, 97-99 FLSTS Chrome 49004-90

642908 86-87 FLST, 88-99 FLSTC, 90-95, 97-99 FLSTF, 93-96 FLSTN, 97-99 FLSTS Black

642909 72-84 FX Shovel, 85 FXWG, 84-89, 99 FXST, 87-98 FXSTC, 89-99 FXSTS, 95-97 FXSTSB, 98-99 FXSTB Black

642911 00-03, 07-12, 14-17 FLSTC, 00-03 FLSTS, 00, 03-12, 14-17 FLSTF, 01-06 FLSTCI, 01-03 FLSTSI, 01-06 FLSTFI,

05 FLSTFSE, 05, 07-12, 14-17 FLSTN, 05-06 FLSTSCI, 05-06 FLSTNI, 06 FLSTFSE2, 06 FLSTI, 07 FLSTSC, 08-

11 FLSTSB, 10-12, 14-17 FLSTFB, 10 FLSTSE, 11 FLSTSE2, 12 FLSTSE3, 13 FLSTC 103, 13 FLSTC 103 ANV,

13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSTFBS

642912 00-03, 07-12, 14-17 FLSTC, 00-03 FLSTS, 00, 03-12, 14-17 FLSTF, 01-06 FLSTCI, 01-03 FLSTSI, 01-06 FLSTFI,

05 FLSTFSE, 05, 07-12, 14-17 FLSTN, 05-06 FLSTSCI, 05-06 FLSTNI, 06 FLSTFSE2, 06 FLSTI, 07 FLSTSC, 08-

11 FLSTSB, 10-12, 14-17 FLSTFB, 10 FLSTSE, 11 FLSTSE2, 12 FLSTSE3, 13 FLSTC 103, 13 FLSTC 103 ANV,

13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSTFBS

Chrome 49004-

00A

925169 18-24 Softail, (except 19-20 FXDRS 114) Chrome 49000138

925170 18-24 Softail, (except 19-20 FXDRS 114) Black 49000139

Black

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

Chrome Engine Guard with Footrests

This highway bar and footrest combination was designed with the riders comfort in mind. They are constructed of 1.25” steel tubing

and chrome-plated with the addition of a heavy-duty rubber foot pad. They are perfect for those long rides when you want to

stretch your legs while on the road.

Color: Chrome , Position: Front , Unit: Each , Qty.: 1

PART#

FITMENT

610367 86-87 FLST, 88-99 FLSTC, 90-95, 97-99 FLSTF, 93-96 FLSTN, 97-99 FLSTS

610369 97-08 Touring, (except 99-03, 07-08 FLTR, 99-06 FLTRI)

610370 09-24 Touring, (except 09 FLTR, 09 FLTRSE3, 10, 13, 18-24 FLTRX, 11, 15-16 FLTRUSE, 12, 18-19, 21-24 FLTRXSE, 13, 16-19

FLTRU, 13 FLTRXSE2, 13 FLTRXSE2 ANV, 15-23 FLTRXS, 20-24 FLTRK, 22-23 FLTRXST, 22 FLTRKSE, 23 FLTRKSEANV, 23-24

FLHXSE, 24 FLHX, 24 FLTRXSTSE), 09-24 Trike, (except 23-24 FLTRT)


SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.21

EDITION 50

642902

642901

925167

925168

14

Engine Guard with Highway Pegs

Achieve a cool look and added comfort on your rides with these engine guards. They allow you to stretch your legs while providing

a secure foothold on the integrated footrests.


Position: Front , Qty.: 1

PART# FITMENT FITMENT NOTE COLOR OEM #

642902 00-03, 07-11, 14-17 FLSTC, 00, 03-05, 07-12, 14-17 FLSTF, 00-03 FLSTS,

01-05 FLSTCI, 01-05 FLSTFI, 01-03 FLSTSI, 05, 07-12, 14-17 FLSTN,

05 FLSTNI, 05 FLSTSCI, 05 FLSTFSE, 07 FLSTSC, 08-09, 11 FLSTSB, 06

FLSTFSE2, 10-12, 14-17 FLSTFB, 10 FLSTSE, 11 FLSTSE2, 12, 14-17 FLS, 12

FLSTSE3, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 103, 13

FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS

642901 00-03, 07-11, 14-17 FLSTC, 00, 03-05, 07-12, 14-17 FLSTF, 00-03 FLSTS,

01-05 FLSTCI, 01-05 FLSTFI, 01-03 FLSTSI, 05, 07-12, 14-17 FLSTN,

05 FLSTNI, 05 FLSTSCI, 05 FLSTFSE, 07 FLSTSC, 08-09, 11 FLSTSB, 06

FLSTFSE2, 10-12, 14-17 FLSTFB, 10 FLSTSE, 11 FLSTSE2, 12, 14-17 FLS, 12

FLSTSE3, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 103, 13

FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS

925167 18-24 Softail, (except 19-20 FXDRS 114) Except models, equipped


925168 18-24 Softail, (except 19-20 FXDRS 114) Except models, equipped


Black 49440-10

Chrome 49140-05B

Chrome 49000140

Black 49000141

14.22

APPAREL

28928 28929 28932

28934

SEATS &

TOURING

FOOT

CONTROLS

HAND

CONTROLS

28930

LIGHTING

Chrome Highway Bars

American-made reproductions of Original Equipment bars

have flawless chrome-plating and are made from high-strength

tubing with heavy-duty 1-1/4" steel plate mounts welded to the

tubing to insure a perfect fit.

Chrome Front 1-1/4"-Diameter Highway Bars

918383 Fits 18-24 Softail, except 19-20 FXDRS

609621 Fits FX Softail models from 00-17

28932 Fits FX Softail models from 84-99 and 4-speed FX models

from 72-86 (repl. OEM 49016-72D)

609632 Fits Dyna models from 06-17, chrome (exc. SE models)

609622 Fits FXRS/FXDX/FXDWG models from 93-05

609623 Fits all Dyna Glide models (except Dyna Wide Glide

models) from 91-05

609630 Fits 04-20 Sportster, except 05-20 XL 883L, 14-20 XL

1200T, chrome

609624 Fits all Sportster models from late 84-03

28929 Fits 4-speed FL models from late 79-84 (repl. OEM

49040-79)

28928 Fits 4-speed FL models with swingarm frames from

58-E79 (repl. OEM 49038-58B)

Black Front 1-1/4“-Diameter Highway Bars

918384 Fits 18-24 Softail, except 19-20 FXDRS

609626 Fits FX Softail models from 00-17, black

609633 Fits Dyna (exc. SE/FSE) models from 06-17, black

609627 Fits FXRS/FXDX/FXDWG models from 93-05, black

609628 Fits all Dyna Glide models (except Dyna Wide Glide

models) from 91-05, black

Rear Highway Bars

28930 Fits 4-speed chain drive FL models from late 67-84 (repl.

OEM 49137-67B) 7/8" tubing

28934 Fits Softail models from 86-99 (except 90-99 FL Softail

models) repl. OEM 49158-89B (1" tubing)

Warning: These reproduction Highway Bars are for cosmetic use only and will not provide leg

or vehicle protection in the event of a low-speed fall. They are not made nor intended to provide

protection from bodily injury in a collision with an automobile or any other object.

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

WHEELS, TIRES

& BRAKES

FRAMES

Teardrop Tool Boxes

Our popular chrome reproductions of the Original Equipment

‘teardrop’ tool box used from 40-59 are available in two

different versions, with your choice of the old-style lock or a

more modern, conventional tumbler lock for improved security.

26457 Tool box with conventional tumbler lock

Colony Tool Box Mounting Kit

36183 A complete hardware kit for mounting the tool box on

models from 36-61.

New Highway Bars for XL and FXD Models

Highly polished and chromed or flat black highway bars with 38

mm outer diameter. Mounting hardware is included.

682661 Highway bar for 04-20 Sportster models with forward

controls, 38mm, chrome

682665 Highway bar for FXD models 06-17, black, do not fit

FXDWG, FXDF & FLD (forward control)

912580 Highway Bar, 38 mm, black for 13-17 FXSB

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.23

EDITION 50

Tool Box Mounting Brackets

Original-style weld-on mounting brackets

to mount CC reproduction tool boxes on

vintage models. This bracket will work on

stock as well as most custom rigid frames.

26528 53-57 bracket. Mounts the teardrop

shape (CC #26469) tool box

only

Chrome Kickstand Kits for

Softail Models

Complete chrome kickstand kits are

available in 1" under stock length for

lowered bikes. Include all necessary

hardware. Fit all Softail models from 89-99

686321 -1" under stock length

Chrome Kickstand for

Lowered Dyna Glide Models

Chrome kickstand is available 1" under

stock length for lowered bikes. Fits Dyna

Glide models from 91-Up except Dyna

Glide Convertible models.

16003 -1" under stock kickstand

14

Steering Column Lock

This little item can solve a lot of big

problems. Secure your bike with a steering

column lock. In Europe, it is a must to

match Approval and getting insurance for

a custom made bike.

86519 Steering column lock with two

keys

686321 Weld-on lock housing

1“ Lowered Kickstand

Lowered design corrects angle of

kickstand on lowered bikes to ensure bike

is secure and will not fall over.

• A must when lowering your motorcycle

• 1“ shorter than factory kickstand

• Made from forged steel

• Fits factory kickstand mount

• Accept factory kickstand spring

Color: Chrome , Unit:

Each , Qty.: 1

PART#

FITMENT

631098 84-06 Softail

631099 07-24 Touring

930244 99-17 Dyna

Kickstand Kits for Softail

Models

Complete kickstand kits for 89-99 Softail

models in either a stock length or +1 inch

over stock

91991 Kit with stock-length kickstand

890500

696044

Weld On Kickstand by Kustom-

Tech

• Machined from solid steel or billet brass

• Designed with the return spring inside

• Clean and unique look. Steel attach

must be welded to the frame

696043 Raw

696044 Chrome

890500 Brass polished with diamond shaped

Kickstand Tab Extension

Tired of reaching for your kickstand?

Our kickstand extension bolts to your

factory kickstand tab to provide an easy

reach every time, even with extended

floorboards.

• Kickstand extension

• CNC machined from billet aluminum

• Installs over factory kickstand tab

• Eliminates difficulty reaching kickstand

with extended floorboards

• Black or chrome finish

Fitment: 82-84 FL Shovel, 85-24

Touring , Unit: Each , Qty.: 1

PART#

COLOR

919432 Black

919431 Chrome

Kickstand Rubber Bumper for

Touring

Part#: 919683 , Fitment: 99-06 Touring

, OEM #: 50245-99 , Unit: Each , Qty.: 1

14.24

APPAREL

SEATS &

TOURING

688171

Chrome Kickstands for

Sportster Models

Available in a stock length or -1” for

lowered bikes. Fits 04-20 Sportster, except

08-13 XR 1200/X, not for 08 up HDI

models with side stand switch.

610412 Stock length kickstand

610411 -1” under stock length kickstand

688171 Kickstand clevis pin fits 89-20

Sportster models

Kickstand Wedge Kit for

Touring Models

Allows the use of the stock kickstand

when the bike is lowered, without excess

lean. All mounting hardware is included.

688695 Kickstand wedge FLT 86-08

Kickstand Repair Kit

Includes mounting bracket, leg stop,

spring plate and spring. Fits 4-speed Big

Twin models 36-86 (except FXST).

17011010

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

Chrome Weld-On Kickstand by

TC Bros

Get rid of your ugly stock kickstand and

replace it with TC Bros. Choppers super

clean chrome kickstand with hidden

spring. Kit includes chrome kickstand and

weldable mild steel block coped to fit 1

1/8” tubing on your frame.

660913 Weld-on hidden spring kickstand

688174

Pro-One Kickstand Angle Plate

for Softail Models

Lowered bikes can make Original

Equipment side stands nearly useless,

leaving a bike precariously balanced when

parked. This clever design restores the

correct angle to the kickstand to support

the bike safely.

65303 Fits all Softail models from 84-99

FL Style Kickstand

• High strength steel

Fitment: 99-06 Touring , Color:

Chrome , Unit: Each , Qty.: 1

PART# DESCRIPTION OEM #

919682 10“ , Short

Version

919681 11“, Stock

Length

50075-83, 50075-

91

INTAKE

ENGINE

GASKETS

TRANNY &

CLUTCH

DRIVELINE

688173

Kickstands for Late Softail

Models

Stock length replacement kickstands for

07up Softail models, available in black or

chrome finish.

688173 Kickstand for 07-17 Softail models,

chrome

688174 Kickstand for 07-17 Softail models,

black

Kickstand wedge

Fits 84-99 Softail models.

170140 Kickstand wedge Big Twins

Kickstand Bumper for

Sportsters

Rubber kickstand bumper for Sportster

models from 89-20. Sold each.

688645 XL 89-20

170129

688640

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL


Kickstand Bumper for Softail

Replacement kickstand bumper fits Softail

models 89-06. Also used on many onepiece

fuel tanks on FX, FXE and XL 73-E84.

Sold each.

170129 Replaces OEM 62123-66 89-06

Softail

688640 Replaces OEM 62123-07, each

07-17 Softail

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT

14.25

EDITION 50

776955

681254

688185

688186

600734

688187

14

14.26

688188

Kickstand Springs

High quality replacement

kickstand springs. Sold each.

688185 Fits 91-01 Dyna models

(replaces OEM

50057-91)

688186 Fits 99-06 Touring

models (replaces

OEM 50112-99)

688188 Fits 37-84 FL, 84 FXST,

80-90 FLT, 52-83 XL

and K-models (replaces

OEM 50011-30A)

688184 Fits 07-Up Softail

and Touring models

(replaces 49725-07A)

688187 Fits 86-20 Sportster,

85-06 Softail (replaces

OEM 50005-85)

Replacement

kickstand spring

688183 Replacement

kickstand spring,

chrome for models

02-17 Dyna (replaces

OEM 50057-02)

600715

600716

776955

778146

776955

777228

Chrome Deluxe Neck Covers

• Hide welds and wires in one quick and easy step

• Customize the frame’s steering neck and down tubes

776955 14-24 Electra Glides, Road Glides, Road Kings & Street

Glides

605222 09-13 Electra Glides, Road Glides, Road Kings & Street

Glides

600716 95-’07 Electra Glides, Road Glides, Road Kings, Street

Glides & Tour Glides

Chrome Swingarm &

Axle Cover Sets For

Softails by Kuryakyn

Finally someone has come

up with an alternative to the

downtime and expense of

outfitting your Softail with a

chrome swingarm.

Complete kits with

Unlighted Phantom Covers

Super clean set covers the

axle, upper and lower tubing,

and the upper section of the

swingarm.

600734 Fits all 00-07 Softails

(except 00-07 Deuce,

06-up FX Softails)

600736 Fits all 86-99 Softail

models

Note: Lighted Phantom covers are not DOT

approved nor are they intended to replace

stock turn signals or taillights.

Chrome Rear Frame

Covers for Softail

Models

Dress up the rear section of

your Softail. Made of chrome

plastic installs in minutes with

silicone adhesive included. Fits

all Softail models except Fat

Boy and FLSTN models 86-99

(sold in pairs).

78054 Chrome Rear Frame

Covers for Softail

Models

APPAREL

690871

SEATS &

TOURING

Chrome Swingarm Pivot Bolt

Covers for Softail Models

These covers are held in place with set

screws. They fit all Softail models from

84-07 (except Fat Boy and FLSTN models).

Sold in pairs.

14317 Pivot bolt cover for Softails 84-99

688179 Pivot bolt cover for Softails 00-07

690871

FOOT

CONTROLS

HAND

CONTROLS

LIGHTING

ELECTRICAL

Swing Arm Axle Cover

• Aluminum

• Sold in pairs

• For 04-20 Sportster models

690873 Black powder coated matte

690872 Black powder coated gloss

690871 Raw

Thunderbike Frame Cover for

Sportster RH Models

• Replaces the original plastic cover

• Black with Thunderbike lettering


• Incl. all mounting parts

• Note: Brake line must be routed behind

the cover

Part#: 931584 , Fitment: 21-25

Sportster RH , Color: Black , Unit: Each

, Qty.: 1

EXHAUST

INTAKE

ENGINE

Swingarm Cover by Cult Werk

921648 Fits 21-24 Sportster S RH1250S

GASKETS

TRANNY &

CLUTCH

DRIVELINE

Chrome Pivot Bolt Cover for

Late Sportster Models

Fits over the exposed head of the

swingarm pivot bolt on all Sportster

models from 82-03. It features chromeplated

die-cast construction and is held

firmly in place by a sockethead screw. Sold

each.

14318 Chrome Pivot Bolt Cover

Frame Cover for Solo Spring

Seat

• 100% custom-fit ABS plastic part

• All existing bores and millings are

milled on the most modern 5-axis CNC

machining centers

• The part will be delivered in glossy

black

• Fits best in conjunction with Cult Werk

swing saddle

Part#: 921636 , Fitment: 18-20 FXBB,

20-24 FXST, 21-24 FXBBS , Field of

Application: Two holes must be

drilled during assembly for the saddle

base plate , Color: Gloss Black , Unit:

Each , Qty.: 1

Frame Cover for Sportster S

and Nightster Models

With this Thunderbike frame cover it is

possible to hide the brake line, the hoses

of the cooling and the EVAP (Activated

carbon filter) canister.

• Mounting instuction included (DE/EN)

Part#: 923640 , Fitment: 21-24

Sportster S RH1250S, 22-24 Nightster

RH975, 23-24 Nightster Special

RH975S , Color: Black , Unit: Each ,

Qty.: 1

WHEELS, TIRES

& BRAKES

FRAMES

FORKS &

SHOCKS

SHEETMETAL

INSTRUMENTS

& GAUGES

LUBRICANTS &

CHEMICALS

TOOLS &

EQUIPMENT


14.27

EDITION 50

Frame Cover Set

The Thunderbike frame cover set provides an elegant finish to the frame for f.e. rear conversions.

Part#: 917145 , Fitment: 18-19, 23-24 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS

114 ANX, 18 FLFBS 114 ANV, 21-22 FXBRS, 21-24 FLFBS, 23 FLFBS ANV , Color: Black , Unit: Pair , Qty.: 1

14

Frame Cover for Softail M8 Models

• Hides the front engine mount

• Color: black with Thunderbike lettering


• Incl. all attachments

Fitment: 18-25 Softail, (except 22-25 FXLRST, 22 FXRST) , Unit: Each , Qty.: 1

PART#

COLOR

931580 Flat Black

931579 Black

14.28

Section 14 Custom Chrome Europe Catalog 2025

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?