Tillage Catalogue 2025

TILLAGE

2025

PRODUCTIVITY | EFFICIENCY

Welcome to

Tillage 2025

DESIGNED AND MADE IN AUSTRALIA TO SUIT CONDITIONS

Dual Shoot or Single Shoot, Liquid or wetter or both! We have parts to suit your crops and conditions.

Designed and made in Australia, to suit a variety of soil types. We have added an extra hard facing option

to our Morris Tine Legs and Adapt-T Seeding Systems.

THE ADAPT-T SEEDING SYSTEM

• Comes assembled together

• Liquid and Wetter Options

• Easily switch between Dual and Single Shoot

• Continous point for reduced wastage

• Available for Morris, Horsch and Bourgault

THE HOSE HOLDER

• Reduces hose wear on Morris Bars

• Suits most ground engaging gear

• Made from galvanized steel

Our team is here to help, so please call your local Primary Sales technical support for advice on the

right product for your conditions and your machine.

Call 08-9250-3500 or email us at sales@primarysales.com.au

2 TILAGE 2025

For help & more information, call your Primary Sales office

ADAPT-T SEEDING SYSTEM

SINGLE SHOOT

ADAPT-T SINGLE SHOOT $499.00

ADAPT-T SINGLE SHOOT STARTER MORRIS INC HOLDER, 2 X POINTS & FASTENERS

ADT3-MO-SSKA

ADAPT-T CURVED SEED TUBE MORRIS/HORSCH

ADT3-STMC-40

ADAPT-T SINGLE SHOOT BEHIND THE POINT $493.00

ADAPT-T DUAL SHOOT STARTER MORRIS INC HOLDER, 2 X POINTS & FASTENERS, AND FERTILISER TUBE

ADT3-MO-DSKA

ADAPT-T FERT BOOT TIPPED INC BOLT & NYLOC

ADT3-FB01-TK

ADAPT-T DUAL SHOOT - NO LIQUID $572.50


ADT3-MO-DSKA


ADT3-STMC-40


ADT3-FB01-TK

ADAPT-T DUAL SHOOT - LIQUID AND WETTER $628.50


ADT3-MO-DSKA

ADAPT-T LIQUID TUBE SUIT MORRIS/HORSCH

ADT3-LM

Precision Non-Wetting Soil Sticky Soil

Seeding


ADT3-STMC-40L


ADT3-FB01-TK

Prices are ex works & exclude GST.

All Prices are list & are subject to change without notice. Parts may vary slightly from illustrations. PRIMARYSALES.COM.AU 3


Seeding

BUILD YOUR OWN KIT

1. CHOOSE YOUR STARTER

SPARE PARTS

ADAPT-T SINGLE SHOOT STARTER MORRIS INC HOLDER, 2 X

POINTS & FASTENERS

ADT3-MO-SSKA

$419.50

2. ADD YOUR SEED BOOT

ADAPT-T CURVED SEED TUBE MORRIS 40MM

ADT3-STMC-40

$79.50

ADAPT-T CURVED SEED TUBE MORIS 55MM

ADT3-STMC-55

$115.00

$69.50

3. ADD FERT BOOT (IF REQUIRED)


ADT3-FB01-TK

$52.00

$117.00


ADAPT-T PAIRED ROW FERT/SEED. TUBE REAR

ADT3-PR-FTRH

ADAPT-T PAIRED ROW BOOT TIPPED INC BOLT & NYLOC

ADT3-PR01-TK

ADAPT-T FERTILISER TUBE INC MOUNT CLAMP ADT3-FTH-K $22.00

ADAPT-T SEED BOOT MOUNT PLATE (PAIR INC FASTENERS) SUIT

MORRIS/HORSCH

ADAPT-T DUAL SHOOT STARTER MORRIS INC HOLDER, 2 X

POINTS & FASTENERS, AND FERTILISER TUBE

ADT3-MO-DSKA

$441.00

4. ADD LIQUID TUBE

ADAPT-T CURVED SEED TUBE 40MM WITH LIQ

ADT3-STMC-40L

$98.00

ADAPT-T CURVED SEED TUBE MORIS 55MM WITH LIQ

ADT3-STMC-55L

$157.50


ADT3-LM

$37.50

ADT3-SBM01-K $62.00

ADAPT-T HOLDER, SUIT MORRIS ADT3-HM $155.00

ADAPT-T CONTINUOUS POINT 16MM INC FASTENERS ADT3-P03-16K $115.00

ADAPT-T CONTINUOUS POINT 16MM HARD FACING

INC FASTENERS

ADT3-P03-16-HF-K $123.00

For WA Soils

4 TILLAGE 2025



ADAPT-T ADAP-T SINGLE SHOOT $499 $532.00

ADAPT-T SINGLE SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS & FASTENERS

ADT3-H18-SSKA


ADT3-STMC-40

ADAP-T SINGLE SHOOT BEHIND THE POINT $519.00

ADAPT-T DUAL SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS & FASTENERS, AND FERTILISER TUBE

ADT3-H18-DSKA

FERTILISER


ADT3-FB01-TK

ADAPT-T DUAL SHOOT - NO LIQUID ADT3-H18-DS $598.50

ADAPT-T DUAL SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS & FASTENERS, AND FERTILISER TUBE

ADT3-H18-DSKA


ADT3-STMC-40


ADT3-FB01-TK



ADT3-H18-DSKA


ADT3-LM


Seeding

ADAPT-T CURVED SEED TUBE MORRIS/HORSCH WITH LIQ

ADT3-STMC-40L


ADT3-FB01-TK




Seeding


SPARE PARTS

ADAPT-T SINGLE SHOOT STARTER HORSCH INC HOLDER, 2 X

POINTS & FASTENERS

ADT3-H18-SSKA

$452.50


ADAPT-T CURVED SEED TUBE 40MM

ADT3-STMC-40

$79.50


ADT3-STMC-55

$115.00

$69.50



ADT3-FB01-TK

$52.00

$117.00


BUILD ADAP-T YOUR SINGLE OWN SHOOT KIT

$499


ADT3-PR-FTRH


ADT3-PR01-TK

ADAPT-T FERTILISER TUBE INC MOUNT CLAMP ADT3-FTH-K $22.00

ADAPT-T SEED BOOT MOUNT PLATE (PAIR INC FASTENERS) SUIT

MORRIS/HORSCH

ADAPT-T DUAL SHOOT STARTER MORRIS INC HOLDER, 2 X

POINTS & FASTENERS, AND FERTILISER TUBE

ADT3-H18-DSKA

$467.00

4. ADD LIQUID TUBE


ADT3-STMC-40L

$98.00


ADT3-STMC-55L

$157.50


ADT3-LM

$37.50

ADT3-SBM01-K $62.00

ADAPT-T HOLDER, SUIT HORSCH ADT3-HH18V2 $220.00


ADAPT-T CONTINUOUS POINT 16MM HARD FACING

INC FASTENERS

ADT3-P03-16-HF-K $123.00

For WA Soils

6 TILLAGE 2025



BUILD ADAPT-T- YOUR SINGLE OWN SHOOT KIT

$496.50

ADAPT-T SINGLE SHOOT STARTER BOURGAULT INC HOLDER, 2 X POINTS & FASTENERS

ADT3-BG-SSKA

ADAPT-T CURVED SEED TUBE BOURGAULT

ADT3-STBC-40

ADAPT-T SINGLE SHOOT BEHIND THE POINT $491.00

ADAPT-T DUAL SHOOT STARTER BOURGAULT INC HOLDER, 2 X POINTS & FASTENERS AND FERTILISER

TUBE

ADT3-BG-DSKA


ADT3-FB01-TK

ADAPT-T DUAL SHOOT - NO LIQUID $570.50


TUBE

ADT3-BG-DSKA

ADAPT-T CURVED SEED TUBE BOURGAULT

ADT3-STBC-40


ADT3-FB01-TK



TUBE

ADT3-BG-DSKA

ADAPT-T LIQUID TUBE SUIT BOURGAULT

ADT3-LB2


Seeding

ADAPT-T CURVED SEED TUBE BOURGAULT WITH LIQ

ADT3-STBC-40L


ADT3-FB01-TK




Seeding


BUILD YOUR OWN KIT


ADAPT-T SINGLE SHOOT STARTER BOURGAULT INC HOLDER, 2 X

ADAPT-T DUAL SHOOT STARTER BOURGAULT INC HOLDER, 2 X

POINTS, DEFLECTOR & FASTENERS

POINTS & FASTENERS AND FERTILISER TUBE

ADT3-BG-SSKA

ADT3-BG-DSKA

$ $417.00

$ $439.00




ADT3-STBC-40

ADT3-STBC-40L

$ $79.50

$ $89.00


ADT3-PR-FTRB

$ $70.00


4. ADD LIQUID TUBE



ADT3-FB01-TK

ADT3-LB2

$52.00

$37.50


ADT3-PR01-TK

$117.00

SPARE PARTS

ADAPT-T HOLDER MOUNT BOURGAULT (INC FASTENERS) ADT3-HBM-K $92.50 $92.00

ADAPT-T HOLDER BOURGAULT ADT3-HB $136.00


DEFLECTOR BOURGAULT ADT3-DB $9.50 $10.00

ADAPT-T FERTILIZER FERTILISER TUBE INC MOUNT CLAMP ADT3-FTH-K $21.50 $22.00

8 TILLAGE 2025


CONTOUR 2 / QUANTUM DUAL

THE OPTIMUM DUAL SHOOT KIT (NO LIQUID) MO-K-DS40C2 $630.00

TINE LEG WITH HARD FACING (TO SUIT

DEEP BANDING, ADJ. FERTILISER TUBE INC

REPLACEABLE POINT) INCL. 2 X B&N

4X B&N, FOR OPTIMUM SEPARATION

MO-C2-TLHDL

PHX-DS-FT2

WEAR ENHANCED 12MM, HEIGHT-ADJ

ADJ SEED TUBE WITH 40MM CLOSER

REPLACEABLE POINT INCL. B&N (B-M10-

MO-C2-STC-40

035-G10, B-NM10-NYL)

MO-C2-PF

MORRIS QUANTUM HOSE HOLDER

- GALVANISED (INC FASTENERS)

MO-Q-HH

THE ULTIMATE DUAL SHOOT KIT (WITH LIQUID)

MO-K-DS40 $671.00

10 MM LIQUID TUBE


MO-C2-LIQ

4X B&N, FOR OPTIMUM SEPARATION

PHX-DS-FT2




MO-C2-TLHDL

MO-C2-STC-40


MORRIS QUANTUM HOSE HOLDER


- GALVANISED (INC FASTENERS)

035-G10, B-NM10-NYL)

MO-Q-HH

MO-C2-PF

THE SUPREME DUAL SHOOT KIT (WITH WETTER AND LIQUID)

MO-K-DS40WL $707.00

10 MM LIQUID TUBE

MORRIS QUANTUM HOSE HOLDER - GAL-

MO-C2-LIQ

VANISED (INC FASTENERS)

MO-Q-HH



DEEP BANDING, ADJ. FERTILISER TUBE INC 4X B&N,

MO-C2-TLHDL

FOR OPTIMUM SEPARATION

PHX-DS-FT2


Seeding



035-G10, B-NM10-NYL)

MO-C2-PF

ADJ SEED TUBE 40MM CLOSER WITH LIQ

MO-C2-STC-40C2L




Seeding

TINE LEG (TO SUIT REPLACEABLE POINT)

INCL. 2 X B&N

MO-C2-TL

$185.00



035-G10, B-NM10-NYL)

MO-C2-PF

$117.00

TINE LEG WITH IN-LINE SINGLE SHOOT BEHIND THE POINT


INCL. 2 X B&N

MO-C2-TL

$185.00

TINE LEG WITH MORRIS PAIRED ROW & PSA WING DUAL SHOOT >

FOR ACCRETIVE SOIL CONDITIONS


INCL. 2 X B&N

MO-C2-TL

$185.00

WEAR ENHANCED 12MM, HEIGHT-ADJ REPLACEABLE

POINT INCL. B&N (B-M10-035-G10, B-NM10-NYL)

MO-C2-PF

$117.00

CONTOUR 2 / QUANTUM SINGLE

TINE LEG WITH IN-LINE SINGLE SHOOT

10 MM LIQUID TUBE

MO-C2-LIQ

$41

ADJ SEED TUBE WITH (CURVE) 40MM CLOSER

MO-C2-STC-40C2

$91.50

SINGLE SHOOT BRACKET (INC 4 X B&N)

MO-C2-SBB

$50.50


4X B&N

PHX-DS-FT2

$125

WEAR ENHANCED 12MM, HEIGHT-ADJ REPLACEABLE

POINT INCL. B&N (B-M10-035-G10, B-NM10-NYL)

MO-C2-PF

$117

10MM LIQUID TUBE

MO-C2-LIQ

$41

WEAR ENHANCED WING TO SUIT OEM MORRIS

PAIRED ROW

MO-C2-WING

$126

10 TILLAGE 2025


1. CHOOSE YOUR TINE LEG 2. CHOOSE YOUR POINT

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N.

MO-C2-TL

$185.00

TINE LEG WITH HARD FACING (TO SUIT REPLACEABLE POINT)

INCL. 2 X B&N

MO-C2-TLHDL

$204.00

3. CHOOSE YOUR FERT TUBE OR SHOOT BRACKET

DEEP BANDING, ADJ. FERTILISER TUBE INC 4X B&N, FOR OPTI-

MUM SEPARATION

PHX-DS-FT2

$125.00

PHOENIX DUAL SHOOT FERT TUBE - DEEP WITH HARD-

FACING INC 4 B&N

PHX-DS-FT2HD

$157.00

4. CHOOSE YOUR SEED TUBE


MO-C2-STC-40C2

$91.50


MO-C2-STC-55C2

$118.50

WEAR ENHANCED WING TO SUIT OEM MORRIS PAIRED ROW

MO-C2-WING

$126.00

LIQUID AND WETTER SOLUTIONS QUANTUMS ONLY

MORRIS SEED TUBE 40MM TAIL WITH LIQ (SUITS QUANTUM ONLY)

MO-C2-STC-40L

$123.50

MORRIS SEED TUBE 55MM TAIL WITH LIQ (SUITS QUANTUM ONLY)

MO-C2-STC-55L

$130.00

MORRIS Y TAIL SEED TUBE WITH DUAL LIQUID (SUITS QUANTUM ONLY)

MO-C2-ST-YTAIL-L

$168.00

MORRIS SEED TUBE 40MM CURVE TAIL WITH LIQ (SUITS QUAN-

TUM ONLY)

MO-C2-STC-40C2L

$127.50

5. CHOOSE ADDITIONAL OPTIONS

10MM LIQUID TUBE

MO-C2-LIQ

$41.00

MO-C2-RD

$44.50

CONTOUR 2 / QUANTUM

BUILD YOUR OWN KIT/ SPARE PARTS

REVERSIBLE RESIDUE DEFLECTOR

WEAR ENHANCED, 12MM HEIGHT-ADJ REPLACEABLE POINT

INCL. B&N

MO-C2-PF

$117.00

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT-ADJ. REPLACE-

ABLE POINT INCL. B&N

MO-C2-PF-16

$151.00

ADJ FERTILISER TUBE (INC B & N)

PHX-DS-FTN

$76.50

SINGLE SHOOT BRACKET (INC 4 X B& N)

MO-C2-SBB

$50.50


MO-C2-STC-40

$88.00


MO-C2-STC-55

$91.50

SEED TUBE 60MM Y-TAIL

MO-C2-ST-YTAIL

$136.50

LIQUID AND WETTER SOLUTIONS WITH

C2 CLEARANCE

MORRIS C2 SEED TUBE - 40MM WITH LIQUID WITH C2 CLEARANCE

MO-C2-STC-40L2

$126.00

MORRIS C2 CURVED SEED TUBE - 40MM WITH LIQUID WITH C2

CLEARANCE

MO-C2-STC-40C2L2

$131.50

MORRIS C2 CURVED SEED TUBE - 55MM WITH LIQUID WITH C2

CLEARANCE

MO-C2-STC-55C2L2

$144.00

HOSE HOLDER - GALVANISED (INC FASTENERS)

MO-Q-HH

$93.00

Suits Morris Quantum and most ground engaging gear, enquire for

more details.


Seeding




Seeding

CONTOUR DRILL 1

TINE LEG WITH IN-LINE DUAL SHOOT > FOR ACCRETIVE SOIL CONDITIONS


10 MM LIQUID TUBE

INCL. 2 X B&N

MO-CD-CTL-LT

MO-CD-CTL

$31.00

$175.00




MO-C2-STC-40

035-G10, B-NM10-NYL)

$88.00

MO-C2-PF

$117.00

DEEP BANDING, ADJ. FERTILISER TUBE (INC 4X

B&N) FOR OPTIMUM SEPARATION

PHX-DS-FT2

$125.00

TINE LEG WITH MORRIS PAIRED ROW & PSA WING DUAL SHOOT > FOR ALL SOIL CONDITIONS


10MM LIQUID TUBE

INCL. 2 X B&N

MO-CD-CTL-LT

MO-CD-CTL

$31.00

$175.00


WEAR ENHANCED WING TO SUIT OEM MORRIS


PAIRED ROW

035-G10, B-NM10-NYL)

MO-C2-WING

MO-C2-PF

$126.00

$117.00

TINE LEG WITH IN-LINE SINGLE SHOOT OPTIONS


10MM LIQUID TUBE

INCL. 2 X B&N

MO-CD-CTL-LT

MO-CD-CTL

$31.00

$ $175.00


MO-C2-ST-YTAIL

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT

$136.00

INCL. B&N

MO-C2-PF

SINGLE SHOOT BRACKET (IN 4 B &N)

$117.00

MO-C2-SBB

$50.50

12 TILLAGE 2025



1. ADD YOUR TINE LEG 2. CHOOSE YOUR POINT

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N.

MO-CD-CTL

$175.00


3. CHOOSE YOUR FERT TUBE OR SHOOT BRACKET

DEEP BANDING, ADJ. FERTILISER TUBE INC 4X B&N, FOR OPTI-

MUM SEPARATION

PHX-DS-FT2

$125.00

ADJ FERTILISER TUBE (INC 4 X B&N)

PHX-DS-FTN

$76.50

4. CHOOSE YOUR SEED TUBE

5. CHOOSE ADDITIONAL OPTIONS

10MM LIQUID TUBE

MO-CD-CTL-LT

$31.00

CONTOUR DRILL 1


MO-C2-STC-40

$88.00

WEAR ENHANCED WING TO SUIT OEM MORRIS PAIRED ROW

MO-C2-WING

$126.00

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT INCL. B&N

MO-C2-PF

$117.00

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE

POINT INCL. B&N

MO-C2-PF-16

$151.00

SINGLE SHOOT BRACKET (INC 4 X B&N)

MO-C2-SBB

$50.50


MO-C2-ST-YTAIL

$136.50

REVERSIBLE RESIDUE DEFLECTOR

MO-C2-RD

$44.50


Seeding




Seeding

POINT WITH HARD FACING FOR 4420

BOURGAULT PARALINK

TINE LEG WITH IN-LINE DUAL & SINGLE SHOOT > FOR SANDED/LOAMY SOIL

CURVED STEEL SEED TUBE

BG-3310-STC-3

$81.00

OPTIONS

BOURGAULT 4420

HEAVY DUTY 16MM WEAR EN-

HANCED, HEIGHT ADJ. REPLACE-


BG-3310-P16 $153.50

STRAIGHT ADJ STEEL SEED TUBE BG-3310-ST-2 $100.00

DJ SEED TUBE 60MM Y-TAIL

BG-4420-P

$170.00

BG-3310-

YTAIL

$117.00

HARD FACING SIDE PANEL

AND LEADING EDGE

WEAR ENHANCED, HEIGHT-ADJ.

REPLACEABLE POINT WITH LIQUID

TUBE INCL. B&N


HANCED, HEIGHT-ADJ. REPLACE-

ABLE POINT WITH LIQUID TUBE.

INCL B&N

STEEL REDUCER TUBE REQUIRED

WHEN USING 25MM I.D. HOSE

NEW PRODUCT

SEED BOOT AND

PAIRED ROW

OPTION

BG-3310-P-

LIQ

BG-3310-

P16-LIQ

Coming

Soon

TINE ADAPTOR, INC: POINT HOLDER FERTILISER

TUBE, SHANK MOUNT PLATE (INC 4 X B&N)

BG-3310-TA2

$142.00

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE

POINT INCL. B&N

BG-3310-P

$114.00

$131.00

$165.00

ST-RED-32-25 $12.00

14 TILLAGE 2025


HORSCH SPRINTER (2018 & ONWARDS)

TINE LEG WITH IN-LINE DUAL SHOOT > ALL ROUNDER PHOENIX

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2

X B&N

PHX-H18-TL

$198.00

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT INCL. B&N

(B-M10-035-G10, B-NM10-NYL)

MO-C2-PF

$117.00

OPTIONS




MO-C2-PF16 $151.00

LIQUID TUBE

PHX-H18-LIQ

$40.50


PHX-STC-40C-2

DEEP BANDING, ADJ FERTILISER TUBE (INX 4

X B&N)

PHX-DS-FT2

$125.00

ADJ FERTILISER TUBE (INC 4 X

B&N)

PHX-DS-FTN $76.50


Wetting

ADJ SEED TUBE WITH 40MM

CLOSER

PHX-STC-40-2 $95.50 REVERSIBLE RESIDUE DEFLECTOR MO-C2-RD $44.50

TINE LEG WITH IN-LINE DUAL & SINGLE SHOOT > FOR SANDED/LOAMY SOIL

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2

X B&N

HOR-S18-TL

$128.50

CURVED STEEL SEED TUBE

BG-3310-STC-3

$81.00

TINE ADAPTOR, IN: POINT HOLDER FERTILISER TUBE,

SHANK MOUNT PLATE (INC 4 X B&N)

BG-3310-TA2

$142.00

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT

INCL. B&N

BG-3310-P

$114.00

OPTIONS




BG-3310-P16 $153.50 STRAIGHT ADJ STEEL SEED TUBE BG-3310-ST-2 $100.00

WEAR ENHANCED, HEIGHT-ADJ.

REPLACEABLE POINT WITH LIQUID

TUBE INCL. B&N

BG-3310-P-

LIQ

$131.00 ADJ SEED TUBE 60MM Y-TAIL

BG-3310-

YTAIL

$117.00


HANCED, HEIGHT-ADJ. REPLACE-

ABLE POINT WITH LIQUID TUBE.

INCL B&N

BG-3310-

P16-LIQ

$165.00



Precision Yield Seeding

Non-Wetting Soil Weeding Deep Ripping

Primary Coulter Assemblies

Excels in heavy Stubbles & vine-type weeds

The right-hand side of this paddock clearly illustrates the benefits of using our coulter discs

when sowing into heavy stubbles.

• Heavy-duty castoring coulter assemblies designed for a wide range of 100mmframe

cultivators, chisel plows and toolbars, featuring: adjustable depth (5

increments) & pressure settings

• Can be pinned-up when not required or easily removed

• Fitted with 500mm Ø x 60 ripple disc

• Long service life & low-maintenance design

• Includes all mounting gear

• Suitable for bars with adequate lifting capacity only

CLT-TBM-HYD-A

CLT-TBM-HYD-N

CLT-TBM-HYD-W

CLT-SBM-HYD

CLT-SBM-60

CLT-TBM-60-HDA

CLT-TBM-60-HD260

CLT-TBM-60-HD300

CLT-TBM-60

ORDER

SOON FOR

DELIVERY

2025

Twin Hydraulic Coulter HD Adjustable

Twin Hydraulic Coulter Fixed 260mm

Twin Hydraulic Coulter Fixed 300mm

Single Hydraulic Coulter

Single Bar Mounted Coulter

Heavy Duty Twin Adjustable Coulter

260mm Heavy Duty Twin Fix 260mm Coulter

Heavy Duty Twin Fix 300mm Coulter

Twin Bar Mounted Coulter with adjustable

spacing: 160mm to 234mm or 226mm to

330mm @ approx 10mm increments. Fixed

spacing is also available out to 400mm.

POA

POA

POA

POA

$2,019.00

$3,075.00

$2,325.00

$2,455.00

$2,265.00

TWIN ADJUSTABLE WIDTH,

HYDRAULIC DEPTH CONTROL

CLT-TBM-HYD-A

SINGLE DISC ASSEMBLY

SINGLE Bar Mount

CLT-SBM-60

TWIN DISC ASSEMBLY

Twin Adjustable

CLT-TBM-60

HEAVY DUTY TWIN DISC

ASSEMBLY Twin H/D Adjustable

CLT-TBM-60-HDA

Heavy duty adjustable version, showing

tapered roller bearing assemblies.

16 TILLAGE 2025


MADE RUGGED FOR DURABILITY & PRODUCTIVITY

Productivity

Precision Seeder Bar

With increasing need for dry seeding the priority for many

Australian farmers is getting

the seed into the ground for effective soil-to-seed contact and

to take advantage of any available moisture at depth whilst

completing their seeding program in time to benefit from rain

when it arrives.

Seeding into High Stubble

Depth of frame allows high flow of trash through the bar. Combined

with contour following tine module able to deliver 1000lbs

breakout at the point, this gives you control to maintain effective

delivery of seed in compact to rocky soil conditions.

Precision Non-Wetting Soil Sticky Soil Weeding

Stubble

Designed for Durability

Deep solid frame structure provides the rigid strength required to

cope with tough Australian farming conditions.

Control

To achieve flourishing crop emergence and yield potential having

better control over consistency in seed depth, fertiliser separation

and the soil-to-seed contact to suit your specific paddock

conditions is essential.

Trash Flow

Floatation tyres for better weight distribution & control

Superior through frame trash flow through deep rank frame

design (6 centre and 5 on wing frames)

Depth & Placement

Control over seed and fertiliser separation and placement to your

conditions, easy seed boot adjustment in 7.5mm increments and

control to

dig deep or shallow; easy control of working depth of the tine

from 5mm to 300mm.

Leading Ground

Engaging Options

See page 18



Precision Tine Assembly


• Hydraulically adjustable tine trip delivers up to 1000LB force at the point

• Poppet valve in tine cylinder to dampen return

• Assembly can be pinned up for double row spacing

ROLLER BOX U-PLATE

BOLT ON REPLACEMENT

P-T-RBUP-B2

ROLLER ASSEMBLY COMPLETE

FOR ROLLER BOX ASSEMBLY

P-T-FTRAC-3275

SHORT RE-OPENER TO SUIT

BOLT-ON WEAR PLATE HEAT

TREATED SPRING Steel tine,

16mm wide. Tine depth

adjustable in increments of

7.5mm

P-ST-3087-SH

PPS HUB CAP SUIT 4 STUD

HUB PRESS WHEEL &

$40.00

$95.00

$32.50

COULTER

P-PW-HC-2966-8 $49.50

PRESS WHEEL TYRE,

140MM WIDE “V”

P-PW-TYWV-2965

PRESS WHEEL RIM HALF,

GALVANISED STEEL

P-PW-RH-2873

$180.50

$34.50

MOUNT BAR FOR Y-TAIL

BOOT

(2 X BRACKET REQUIRED)

P-ST-3087-ST-V4

$45.00

65MM Y-TAIL SUITS 38MM

OD HOSE

P-ST-YTAIL

$118.50

FERTILISER TUBE, GALVANISED

(Hose holder Included)

P-FT-3107-2

SEED TUBE FOR 3087

RE-OPENER

P-ST-3087-04N

WEAR PLATES FOR 3087

RE- OPENER TUNGSTEN

$32.50

TIPPED C/W BOLTS 25MM

P-ST-3087-WP25 $30.50

25MM HD WITH EXTRA

TUNGSTEN

P-ST-3087-WP25E

40MM WIDE

P-ST-3087-WP40

$64.50

$48.00

$221.00

FERTILISER INJECTOR

TUBE WITH TC

WEAR PROTECTION

(Unsuitable for harsh

conditions)

P-FT-3003-SQ

$109.00

WING POINT MOUNT

FERT TUBE 32MM

P-FT-PMW-RH/LH

KNIFE POINT MOUNT

FERT TUBE 32MM

P-FT-PMK-LH/RH

MOUNT BAR FOR CURVED

BOOT

(2 X BRACKET REQUIRED)

P-ST-3087-ST-V4

$45.00

25MM WIDE CURVED TAIL

SUITS 38MM OD HOSE

P-ST-TAIL-C25

$100.50

LOWER TINE SHORT

P-T-LTS-3339

COMPLETE TINE RAM

ASSEMBLY

P-R-TINE-P-ASS

OPTIONAL LOWER TINE

QUICK ADJUSTER

Get the best wear from

your points with this clever

innovation!

P-T-LTQA INC PIN/CLIP

LIQUID FERTILISER TUBE 10MM

FOR PPS WINGED POINT

P-FT-3327-LIQW

CAST POINTS, HEAT TREATED

WITH TUNGSTEN CARBIDE TIPS

(Fixed to tine lower leg with

flush-fitting roll pins)

KNIFE POINT, 200 MM T/C

P-P-K-200-3325

KNIFE POINT,150 MM T/C

P-P-K-150-3325

$892.00

$176.00

STAINLESS STEEL (Other sizes available

to order)

FOR PPS KNIFE POINT

P-FT-3325-LHDK

$75.00

$56.50

$140.50

$128.00

WINGED POINT, 190 MM T/C

P-P-W-190-3327 $212.00

WINGED POINT,150 MM T/C

P-P-W-150-3327 $212.00

FERTILISER PROFILED

THROUGH THE TILLAGE

ZONE WITH OPTIONAL

POLYURETHANE FERTILIS-

ER BOOT.

INC. STAINLESS T-BOLT

CLAMP

P-FT-PFC-3001

$36.00

18 TILLAGE 2025


TINES WITH 2 X 7/16” BOLT HOLES @45MM CENTRES

Machine

CASE PTX 600 350LB, FLEXICOIL

265/350LB. C SHANK SHEARER 800 (PRE-2002)

GASON 5100

AFM 430LB

Bolts & Nuts for narrow points:

Points Selection

See Below

See Below

See Below

Two 2¾”X 7/16” G8 Bolts & Nylocs (includes extra

length for fitting boots) torque setting 75 nm, 55 LBFT.

SUPER SEEDER (60MM WING)

Tungsten Carbide on leading

edge and underside of wing

PR-96-DB-TW

Run

$92.00

Out

Double Shoot Boots

Use the cross-bolt to position the fertiliser

delivery tube for deep or shallow placement.

These fertiliser boots are also popular

for single shoot seeding behind shallow

working points, but only when sowing at

depth of working.

Single Shoot Brackets

Cultivators

Single Shoot

Brackets

ST-SBB-1

ST-SBB-4

ST-SBB-4


ANGLED Tungsten Carbide on

leading edge and wing

PR-96-DB-ATW

Run

$103.00

Out

(38MM O/D HOSE)

ST-DPB-LF4

$81.00

Dual Shoot

Fertiliser Brackets

ST-DPB-F1 (32mm O/D

hose)

ST-DPB-LF1 (38MM

O/D hose)

ST-DPB-F4 (32MM)

ST-DPB-LF (38MM)

ST-DPB-LF7 (38MM)

Seed Boots

All

All

All

12MM HEAVY DUTY KNIFE


edge

PR-97

$108.50

7/16” BOLT HOLES@45MM

7/16” BOLT HOLES @ 45MM

CENTRES

CENTRE

(32MM O/D HOSE)

(32MM O/D HOSE)

ST-DPB-F4

ST-DPB-F1

$82.50 $94.50

ST-SBB-1

$54.00

POINTS ARE TUNGSTEN CARBIDE TIPPED

FOR EXTRA WEAR LIFE AND EXCELLENT

PENETRATION

(38MM O/D HOSE)

ST-DPB-LF1

$80.50

ST-SBB-4

$54.00

Seed Boot Options

See Page 24

Run

Out

Precision Yield

Ultra Tine System

Upgrade your existing cultivator or chisel plow to an ultra-low disturbance machine with

these cost efficient, easy-to-fit replacement tines.

MADE TO ORDER

• Choice of “T” wing or Narrow knife point with tungsten carbide on leading edges

• Super slim design for ultra-low soil disturbance and superior stubble flow

• Various Shank, point and boot designs available to order

(ORDER EARLY)



Cultivators

TINES WITH 2 X ½” BOLT HOLES @45MM CENTRES


Machine Points

CASE PTX 600, SHEARER 630, 800 (POST 2002)

MORRIS* 9000 & 2000 (400, 550LB. TINE)

FLEXICOIL 350LB. EDGE-ON

BOURGAULT, EZEE-ON, GYRAL AGBOSS HB

SCARIBAR, GASON VERT. SHANK, SMALE

SIMPLICITY, PSA SCARI. CONVERSIONS


Points Selection

See Below

See Below

See Below

Two 2¾”X 1/2” G8 Bolts & Nylocs (includes extra length

for fitting boots) torque setting 82 nm, 60 LBFT.




PR-86-DB-TW

$132.50

TT-FC-350 for “C” shank Flexicoil tine.

Residue Deflectors (Trash Tubes)

Single Shoot

Brackets

ST-SBB-2-5

ST-SBEO-FC

ST-SBB-4

* Morris Contour Drills: A complete range of point and boot options for these machine is available.

Refer page 12 and 13 for more information.

Double Shoot Boots






depth of working.


Run

Out


Angled Tungsten Carbide on

leading edge and wings

PR-86-DB-ATW

$146.00

32MM O/D HOSE

ST-DPB-F2-5

$78.50

38MM O/D HOSE

½” BOLT HOLTES @ 45-

50MM CENTRES

ST-DPB-LF2-5

$79.50

ST-SBB-2-5

Dual Shoot

Fertiliser Brackets

ST-DPB-F2-5 (32MM O/D

HOSE) OR ST-DPB-LF2-5

(38MM O/D HOSE)

ST-DPB-EO-F

ST-DPB-F4 (32MM OD/

HOSE) OR ST-DPB-LF4

(38MM OD/HOSE)

POINTS ARE TUNGSTEN CARBIDE TIPPED FOR

EXTRA WEAR LIFE AND EXCELLENT PENETRATION

$54.00 $54.00

Enquire for

more options

Seed Boots

All

All

All



edge

PR-87

$138.50

32MM O/D HOSE

½” BOLT HOLES @ 45-57MM

CENTRES

ST-DPB-F4

$82.50

38MM O/D HOSE

ST-DPB-LF4

$81.00

ST-SBB-4

Seed Boot Options

See Page 24

20 TILLAGE 2025


Chisel Plows

TINES WITH 2 X ½” BOLT HOLES @ 57MM CENTRES

Machine

CASE PTX 600, CONCORD,

JOHN DEERE, FRIGGSTAD, FLEXICOIL

550/650 MORRIS 750, SHEARER T/WORKER

BOURGAULT

EZEE-ON

AFM SCARICHISEL


Points Selection

See Below

See Below

Two 2¾”X 1/2” G8 Bolts & Nylocs (includes extra length

for fitting boots) torque setting 82 nm, 60 LBFT.




PR-86-DB-TW

$132.50

PR-18-T

2 ½” RIPPER T.C. TIPPED

$71.00

Double Shoot Boots






depth of working.


Dividing ridge avoids bringing

“sour” soil to surface.

$146.00

Single Shoot

Brackets

ST-SBB-3

ST-SBB-4

Dual Shoot

Fertiliser Brackets

ST-DPB-F3 (32MM O/D

HOSE) OR ST-DPB-LF3

(38MM O/D HOSE)

Note: use ST-DPB-FTW

for Shearer T/worker

(57mm centres)

ST-DPB-F4 (32MM) OR

ST-DPB-LF4 (38MM)

POINTS ARE TUNGSTEN CARBIDE TIPPED FOR

Seed Boots

EXTRA WEAR LIFE AND EXCELLENT PENETRATION

SUPER SEEDER


(60MM WING) ANGLEDTungsten

Carbide on leading edge

edge


and wing

PR-87

PR-86-DB-ATW $138.50

32MM O/D HOSE

32MM O/D HOSE

ST-DPB-F3

ST-DPB-F4

$78.50 $82.50

38MM O/D HOSE ½” BOLT

HOLES @ 57MM CENTRES

ST-DPB-LF3

$81.00 $81.00

ST-SBB-3

$54.00

All

All

38MM O/D HOSE ½” BOLT

HOLES @ 45-57MM CENTRE

ST-DPB-LF4

ST-SBB-4

$54.00

Seed Boot Options

See Page 24




Scarifiers

TINES WITH ½” BOLT HOLE


8” LOW-PROFILE SWEEP T.C.

TIPPED

PR-14-T Run

Out

$76.50

Coil Tine Parts for “Convert-a-Drill”

7” SWEEP T.C. TIPPED

PR-13-T

$67.50

One 2/14 x 1/2 G8 Bolts & Nylocs torque setting 82 nm, 60 LBFT.

Pasture Renovation

DUAL SHOOT

FERTILISER

BOOT

PCT-FT-235

$60.50

75MM (INC.

NYLOCS ) OR -

UB4A 100MM)

PCT-UB3A

$21.00

“BAKER” T-BOOT

PR-93-TW

$68.50

Tungsten Carbide on leading edge (60mm bolt

centres) Use two 1½” x 5/16” bolts for Connor

Shea Coil Tine coulter drill. Use two M10x30

bolts for Agrow Drill or Duncan Drill & two 1¾”x

5/16” for Aitchison (NZ) Drill

PR-94-TW

$86.50

Super Seeder 50mm wing with tungsten carbide

leading edge and underside of wing. Agronomic

benefits of an inverted-T seedbed with minimum

disturbance and precise seed placement.

OR PR-94 $69.00

With tungsten carbide leading edgeUse one 2

1/2 x 7/16 G8 Bolt & Nylocs

COIL TINE MUD

SHIELD

PCT-MUD-1

$12.50

102MM

PCT-L75A OR

PCT-L-102A

$34.50

SINGLE DUAL

SHOOT BRACK-

ET

PCT-SBB-2

$24.00

75MM

PCT-CP3A or

102MM

PCT-CP4A

$25.50

MINI T-BOOT

PR-92-M-TW

$51.50

KNIFE POINT

PR-91

$58.50

BARE TINE $253.00

2 ½” RIPPER T.C. TIPPED

PR-11-T

$55.50

Tungsten Carbide on leading edge (32mm bolt

centres) Use two 1” x 5/16” bolts for Begg,

Shearer Tine Drill, Sod Seeder Coulter Tine Drill,

Trash Culti-Drill, all other machines converted

with “Caldow” tine adaptors. Note: 2003 Model

adaptors may have 3/8” boltholes

Tungsten Carbide on leading edge 20mm-wide

Lucerne type point for pasture renovation and

minimised disturbance of the soil.

Use one 2 1/2 x 7/16 G8 Bolt & Nylocs.

DIAMOND (OR VERTICAL) MOUNT TINE

PCT-D-LH/RH

Shown with adjustable seed and fixed fertiliser boots, mud shielf and

residue deflector.

SLEEVE BARFLOW INSERT

TO FLEXI BOOT

RUBBER FLEXI

BOOT

ST-RFB (see previous

page)

CHOICE OF TAIL

FERTILISER

BOOT

PCT-FT-235

RESIDUE

DEFLECTOR

PCT-TT-4

POINT

PR-94-TW

MUD-SHIELD

ST-MUD-R

22 TILLAGE 2025


Cultivators & Combines

EDGE-ON TINES WITH SINGLE 7 /1 6” BOLT HOLE

Machine

44° STEM ANGLE :ALAN JOHNS¹, GASON 4100/

5100, GY-RAL, INT. 751, MASSEY, RYAN¹, JOHN

SHEARER 580/620, ALFARM, HORWOOD BAG-

SHAW²

35° STEM ANGLE:ACKLAND PARKES, ALFARM, H.

BAGSHAW

44° STEM ANGLE: FORWARD 270, JOHN

DEERE 700/275

35° STEM ANGLE: BLUELINE, DUNSTAN,

4 FMRS, GYRAL, N H

1. USE GRADE 10.9, M10 BOLTS WITH RYAN & ALAN JOHNS TINES

Points Selection

See Below

See Below

2. SOME EARLY HORWOOD BAGSHAW SQUARE TINES REQUIRE TINE ADAPTOR PA-63

SUPER SEEDER WITH 50MM

WING

Tungsten Carbide on nose &

underside of wing

PR-94-TW

$86.50

4” COMBINE POINT, T.C.

TIPPED

PR-3-T

$43.00

2” CULTIVATOR

Tungsten Carbide Tipped

PR-23-T

$38.00

DUAL BANDING BOOT FOR

MOST TINES

Requires tine clip (TCB series)

& 1½” X 5/16”Bolt & Nyloc. Advise

shank type when ordering.

ST-UNI-R35

$79.00

SPEAR POINT, T.C.

TIPPED PR-42

$48.50

Direct fit on Connellan, Gyral,

Gason, Horwood Bagshaw,

fitted with spear point tines

adaptors. Also fits Janke 4

with PA 42-1 adaptor.

Single Shoot

Brackets

ST-SBEO-4

ST-SBEO-3

20MM KNIFE POINT

Tungsten Carbide Tipped

PR-91

$58.50

7” CULTIVATOR POINT T.C

TIPPED

PR-9-T

$61.00

SUITS MOST SINGLE BOLT

TINES Requires suitable st-cb

tine clip and 1” X 5/16”bolt &

nut ST-SBEO-4

$41.50

SUITS JD 275,753, FORWARD

270, 853 AND MOST 35 DE-

GREE TINES

Requires suitable st-cb tine clip

and 1” X 5/16”bolt & nut

ST-SBEO-3

$44.00

Adaptor to fit PR-42

Spear point to

Janke tines

PA-42-1 Run

$45.50

Out

Dual Shoot

Fertiliser Brackets

ST-UNI-R35 WITH

TINE CLIP (See

Below)

ST-FE-270-F

(32MM OD HOSE)

Seed Boots

All

All


One 2½”X 7/16” G8 Bolt &

Nyloc (includes extra length for

fitting boots) torque setting 70

nm, 52 LBFT.

44° & 35° STEM ANGLE

B-212-716-UNC-G8

B-N716-UNC-NYL-G8

DUAL-SHOOT EXAMPLE

Mud shield

For dual banding boots

ST-MUD-R

$13.50

Seed Boot Options

See Page 24

Non-Wetting Soil Weeding Seeding

Deep Ripping



Seeding Boot Selection

TO SUIT 32MM OD DELIVERY HOSE

Select Boot

WARRANTY

STANDARD FLEXI BOOT

ST-RFB

$51.50

LOW-MOUNT FLEXI BOOT

Hose mounts lower to match

long points and avoid bracket

damage on breakout

ST-RFB-LM

$56.00

All rubber Flexiboots must

have the delivery hose (hard

nylon hose) fully inserted

into boot for long life and

accurate seed/fertiliser

placement.

Select Tail

ALL RUBBER FLEXIBOOTS ARE

SUPPLIED WITH QUALITY

STAINLESS HOSE CLAMPS

STRAIGHT TAIL (45MM

LONG)

ST-RFBTAIL-45

$22.50

TOP SPIGOT OF FLEXIBOOT CAN BE

SLEEVED TO SUIT SMALLER HOSE

CURVED TAIL

ST-RFBTAIL-C

$24.50

32, 35 & 38MM TAIL

Not suited to rocky conditions

ST-ADJ

$62.50

TO SUIT 38MM OD DELIVERY HOSE

Select Boot

LARGE FLEXI BOOT

ST-L-RB

$54.00

LARGE FLOW-MOUNT FLEXI

BOOT

Hose mounts lower to match

long points and avoid bracket

damage on breakout

ST-L-RB-LM

$62.00

31.5MM OD X 25MM ID

WHITE NYLON TUBE

ST-FB-32TUBEROL

$240.00

38MM OD X 32MM ID

WHITE NYLON TUBE

ST-FB-38TUBEROL

Select Tail

HARDWARE ORDERED SEPARATLY. USE 2 OF

1” X 5/16” BOLTS AND NYLOCS TO MOUNT.

B-100-516-UNC-G5

B-N516-UNC-NYL

$240.00

Seeding

STRAIGHT TAIL (45MM

LONG)

ST-L-RBTAIL-45

$27.50

STRAIGHT TAIL (25MM

WIDE TAIL)

As used on our precision

seeder bars

P-ST-LRBTL-25

$21.00

TAIL (65MM WIDE)

Not designed for use

behind

narrow points or in rocky

conditions

ST-L-RBTAIL-Y

CURVED TAIL

ST-L-RBTAIL-C

$26.00

$39.50

24 TILLAGE 2025


IMPROVE SOIL

BETTER CROP FLOURISH

HYDRA

INCREASE PRODUCTIVITY LESS STOPPING

VIA VARIABLE RATE PROGRAM

AVAILABLE IN 7,000, 10,000 (2 X 5,000) & 14,000 (2 X 7,000) LITRE SIZES

INCREASE OPERATIONAL EFFICIENCY & CROP PROTECTION

YIELD IMPROVEMENT THROUGH SUPPORTING PRECISION, INFURROW

LIQUID INJECTION IN SEEDING

CHECK FOR SIZES AVAILABLE FOR 2026 SEASON DELIVERY

INCLUDES A 500L FLUSH TANK

COMPATIBLE WITH ALL LEADING LIQUID SYSTEMS

MADE TO ORDER

PROUDLY MADE IN WESTERN AUSTRALIA

PUMP MODULE, PLUMBING/HARNESS LINES & INSTALLATION IS IN AN

ADDITIONAL COST & CAN BE PURCHASED THROUGH YOUR DEALER

OR LIQUID SYSTEM PROVIDER SYSTEMS

PRIMARYSALES.COM.AU/HYDRA

THE HAY EXPRESS

STOCKFEEDING IS NOW QUICK, SAFE & EASY!

Features

» Robust steel construction

» 2 tonne rated load capacity

» Stable, easy-to-tow design

» Patented mechanism controls feeds-out-rate

» Superior W A R N winch mechanism

» Optional breakaway braking system and lights

» Suitable for 4x4, 4x3 big square bales (with an optional

kit for 3x3 bales)

» Tandem load-sharing, roller-rocker spring assemblies

Benefits

» One person operation

» Considerable time and labour saving

» Saferty first (stay in the cab while feeding out)

» Low maintenance

» Wise investment compared with your current

feed-out methods

» Can be towed by any vehicle with a tow hitch

» Feeds hay in “biscuits” so stock can feed from all

directions with less trampling and wastage compared

to windrows

PRIMARYSALES.COM.AU/HAYEXPRESS

ADAPT-A-GAP

CROP FINGER SYSTEM

THE FE-13, 17, 21 AND 30W

Blue) finger extensions are angled upwards to provide an

ideal catching area on headers with downwards angled

knives, directing crop into the front.

FE PICKUP-2

This light duty lifter is designed to pick up down or lodged

crops

FE PICKUP-1

For lentils, peas and other ground- hugging crops

THE FE 13-3,17-3, 21-3 AND 30W-3

(Pink) fingers provide a straight extension of the knife

guard. They are ideal for header knives which are relatively

horizontal when lowered.

FIELD DENSITY FEEDS IN AT WIDTH

“A” AND IS COMPRESSED TO WIDTH

“B” FOR MUCH GREATER DENSITY

AT THE KNIFE.

21MM GAP USING

PLATFORM EXTEND-

ERS

For sorghum,

lupins, etc., and shatter-prone

crops.

13MM GAP SETTING

FE 13 (FE-13-3) extensions

for cereals:

6 bags/acre, 1.2

tonnes/ha.

15MM GAP SETTING

Alternate FE-

13(FE-13-3)with

FE-17(FE-17-3)

extensions for cereals

6-9 bags/acre 1.2-1.8

tonnes/ha

17MM GAP SETTING

FE 17(FE-17-3) extensions

for cereals 9-12

bags/acre, 1.8 - 2.4

tonnes/ha

19MM GAP SETTING

Alternate FE17

(FE-17-3) with FE 21

(FE-21-3) for cereals

12-15 bags/acre, 2.4-

3 tonnes/ha

21MM GAP SETTING

FE21(FE-21-3) extensions

for cereals over

15 bags/acre, over 3

tonnes/ha

3.62:

1

2.93:

1

2.54:

1

2.24:

1

2.00:

1

1.81:

1

26 TILLAGE 2025


SNAP-ON EXTENSIONS FOR ADJUSTING GAP WIDTH & ANGLE

CANADIAN, U.S. AND AUSTRALIAN PATENTS GRANTED

Simply “snap-on” the appropriate extensions to give the gap width/angle

you want and start recovering the grain you have previously been leaving

behind on the ground.

In light crop densities, cut stalks and heads can be lost over the front

because there is insufficient field density.

Also integrates with HWSC to help increase weed seed pickup.

Optional Extensions

These optional extensions greatly boost the flexibility, convenience, and efficiency with which crops such as sorghum, lupins, soybeans, chickpeas, and

faba beans may be profitably harvested.

The system is very useful for combing-up wind or hail-damaged or tangled crops. The angle adjustable version is the most popular, on which the catching

area forward of the guard can be adjusted to positions which best suit most header front types and cutter bar positional requirements.

1

MAXIMUM UPLIFT

(FE50WA-P)

Use on headers with

downward-angled knives

FIND

$85,000

YOU COULD BE LEAVING ON

THE GROUND

DOWNLOAD THE

“CROP LOSS”

CALCULATOR

2 MEDIUM UPLIFT

(FE50WA-S)

3&4 STRAIGHT

(FE50WA-P/FE50WA-S)

5 MEDIUM PICKUP

(FE50WA-P)

6 MAXIMUM PICKUP

(FE50WA-S)

Ideal for knives that are

relatively horizontal when

lowered.

Use for combing up of

down and tangled crops.

REPLACEABLE

WEAR STRIP

FS 10 X 8

REPLACEABLE

WEAR STRIP FS

10 X 8

34MM GAP SETTING

Bare 3 finger guards

for all crops

26MM GAP SETTING

FE-13 (FE-13-3) for

lighter crops when

using 2” centre

guards for cereals

10-13 bags/acre 2-2.6

tonnes/ha

21MM GAP SETTING

FE-30W for lighter

crops when using 2”

centre guards 7-10

bags/acre 1.4 - 2

tonnes/ha

32MM GAP

Using FE 65W-A platform

extenders on

2” center guards for

sorghum, lupins, etc.,

and shatter-prone

crops.

57MM GAP SETTING

Bare 2-finger guards

for all crops

42MM GAP SETTING

For 2-finger guards

in lighter crops,

using FE-30W (blue)

or FE-30W-3 (pink)

extensions

1.33:

1

2.10:

1

2.44:

1

3.20:

1



Get in Touch

National

Customer Service

(08) 9250 3500

sales@primarysales.com.au

Victoria & Southern NSW

Brian Legg

0436 608 435

(08) 9250 3500

bendigo@primarysales.com.au

Western Australia

Michael Bailey

0407 990 794

(08) 9250 3500

sales@primarysales.com.au

Central & Northern NSW & QLD

(08) 9250 3500

dubbo@primarysales.com.au

South Australia

Chris Bazeley

0428 990 973

(08) 9250 3500

adelaide@primarysales.com.au

Trading Terms

Terms and Conditions

Terms and conditions relating to purchases of Primary Sales Terms product are

available from our website.

Part Return Policy

Within 14 days of invoice date - No penalty.

14 days plus of invoice date - A restocking fee may be charged depending on

circumstances of 20%. After 90 days - Non-refundable.

Prices

Are GST-exclusive recommended retail Primary Sales products which

are effective 1st of January 2025 and are subject to change without notice.

Product specifications may also change without notice as a result of our commitment

to product development.

Warranty

Original purchasers of all new Primary Sales products enjoy the protection of

the statutory provisions of the trade practices act. As the set-up and use of tillage,

seeding and harvesting equipment is affected by variables beyond our control,

neither the Manufacturer nor any person employed on its behalf - including

dealers or agents - are liable for any loss or damage, whether consequential or

otherwise, resulting from the use of its products.

Warranty may/may not apply where any product is used for other than its

intended and recommended purpose, or is subjected to pressures, loads or

conditions beyond that for which it is designed. Should a product not perform

its intended or recommended function, contact the supplying Dealer (your

place of purchase).

Quality

ISO 9001

WA Only

PRIMARY SALES AUSTRALIA PTY. LTD

ABN 90 608 575 051

Tillage Catalogue 2025

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?