International Forest Industries June July 2024

SAWMILLING • LOGGING • BIOMASS • RENEWABLE ENERGY

JUNE / JULY 2024

SAWLINES • Forwarders • Mulchers • Wood Drying Technology

VERSATILE SERIES

V E R S A T I L E S E R I E S

5000V

A VERSATILE HEAD,

READY FOR LARGE TREES.

The Log Max 5000V is a modern and reliable harvesting head that

can handle a wide range of logging challenges. This is the perfect

mid-range head for both thinning and final felling. The head can

be equipped with a 82 cm saw bar and has a maximum cutting

diameter of 74 cm. It also features Log Max’s Multi-stemming

MK2, that is agile and lightweight, making thinning work easier.

The Log Max 5000V is suitable for those who seek the perfect

balance between agility, capacity, and durability.

What customers say:

“The cutting and feeding are brutally good and in combination with

the new length measuring unit, Log Max is unstoppable ; )”

logmax.com

LOGGING • BIOMASS

CONTENTS

PONSSE ELEPHANT

ROTTNE F20E

TIGERCAT 1085C

38

FORWARDERS

ALSTOR 840 PRO - COMBI

47

647

46

46 TIGERCAT - MULCHING HEADS

Tigercat Mulching Heads are an End To

End management solution

47 FAE - MULCHING HEADS

FAE expands its line of forestry mulchers

with Bite Limiter technology

6 ZF

Advanced Brake-by-Wire Solutions for the

Global Off-Highway Industry

JUNE / JULY 2024

REGULAR FEATURES 6 Logging News 48 Advertising Index LUMBER PROCESSING CONTENTS

COVER - MiCROTEC Strength Grading


Goldeneye 706 is the combination of

Goldeneye multi-sensor quality scanner

including X-ray and Viscan. This strength

grading solution localizes and recognizes

every detail of your lumber with unbeatable

precision and reliably determines MOE and

MOR at the highest production speeds.

Different grades can be determined for

different parts of the board, so weaker parts

can be removed allowing for a significant

increase in yield. With the approval

of a speed up to 1200m/min it is the

fastest strength grading solution

worldwide. Furthermore, it has been

certified according to the most relevant

grading standards worldwide including

EN 14081, MSR, and AS/NZS1748

standards.

microtec.eu


JUNE / JULY 2024

International Forest Industries | JUNE / JULY 2024 1

LUMBER PROCESSING

SAWLINES

22

18

20

22 SPRINGER

Introducing SAWBOX: Revolutionizing

the North American Lumber Industry

18 MICROTEC

Acon Timber: The first MiCROTEC Logeye

with X-ray capabilities in South America

20 BID GROUP

05242024_IFI_DeltaStackFaster_TPEE(187mmx125mm).pdf 1 5/24/2024 11:30:16 AM

BID Group presents two groundbreaking

innovations revolutionizing sawlines and

operations

Delta motion stacks up faster.

26

26 JARTEK

Frøslev Træ’s own thermally modified

wood production enhances service

level and flexibility

C

M

Y

CM

MY

CY

CMY

K

More throughput. Higher valued product. More profit.

Cut waste & stack productivity sky-high.

An advanced motion controller gets forest product machinery to

move faster, smoother, and more precisely, which enables

higher productivity, improved product quality, and ensures less

wasted raw material.

The difference with Delta is measurable.

Precisely coordinate multi-axis applications 10X faster. Scrap

will diminish, throughput will rise, and profits will stack up as a

result.

COME VISIT US AT

Delta RMC Motion Controllers

BOOTH 841

28 DELTA

35

28

Replacement Option for ControlLogix

Motion Modules

1 to 50 axes

35 USNR

Virginia Carolina Forest Products uses

USNR’s lineal grader for hardwood and

softwood lines

2 International Forest Industries | JUNE / JULY 2024

ISSUE 99

JUNE / JULY 2024

SUBSCRIPTIONS

SUBSCRIPTIONS

Tel:

Tel:

+44

+44

(0)1442

(0)1442

877

877

583

583

e

mma@internationalforestindustries.com

mma@internationalforestindustries.com

Annual

Annual

Subscription

Subscription

UK

UK

and

and

Europe

Europe

£160,

£160, €

230

230

Rest

Rest

of

of

the

the

world

world

US$270

US$270

EDITORIAL

EDITORIAL

T:

T:

+44

+44

(0)1442

(0)1442

877

877

583

583

F:

F:

+44

+44

(0)1442

(0)1442

870

870

617

617

www.internationalforestindustries.com

www.internationalforestindustries.com

2

Claridge

Claridge

Court,

Court,

Lower

Lower

Kings

Kings

Road

Road

Berkhamsted,

Berkhamsted,

Herts.

Herts.

HP4

HP4

2AF,

2AF,

UK

UK

Editor

Editor

Robin

Robin

Peach

Peach

robin@internationalforestindustries.com


Editorial Board

Dr NORTH Patrick AMERICAN Moore – Chairman SALES and Chief

Professor Kevin Lapham Piotr Paschalis-Jakubowicz –

Warsaw

J.P.Media

Agricultural

Inc

University (Poland)

Mr Kim Carstensen

Tel: +1 (630) 420 9752

Director General

Forest Fax: +1 Stewardship (630) 420 9763 Council

Eduardo Email: lapham@jpmediainc.com

Morales

South American Forestry Consultant

WEB OPTIMIZATION

Jo English

jo@internationalforestindustries.com

ADVERTISING AND PROMOTIONS

ADVERTISING AND PROMOTIONS

International Forest Industries Ltd


Advertising Manager

Advertising Manager

Emma Smith

Emma Smith

emma@internationalforestindustries.com


+44 (0)1442 877 583

+44 (0)1442 877 583

Publisher

Associate Editor

Robin Peach

Robin Peach



Advertising Production Enquiries

Advertising Production Enquiries

Emma Smith

Emma Smith



Studio Manager

Luke Evans

International luke@lecreative.co.uk

Forest Industries is published

by International Forest Industries Ltd,

2 Accounts Claridge Court, Lower Kings Road

Berkhamsted, Nicola ShuklaHerts. HP4 2AF, UK

International nicolas@internationalforestindustries.com

Forest Industries (ISSN 1755-6732) is

published bi-monthly by International Forest Industries

Ltd GBR and is distributed in the USA by Asendia USA,

17B International South Middlesex Forest Avenue, Industries Monroe is published NJ 08831 and

additional by International mailing Forest offices. Industries Periodicals Ltd, postage paid at

New 2 Claridge Brunswick Court, NJ. Lower POSTMASTER: Kings Road send address

changes

Berkhamsted,

to International

Herts. HP4

Forest

2AF,

Industries,

UK

17B South

Middlesex Avenue, Monroe NJ 08831

©

International

International

Forest

Forest

Industries

Industries

(ISSN

Ltd

1755-6732)

2007 – 2019

is

IFI

published

uses, as

bi-monthly

preference,

by

SI

International

units throughout.

Forest Industries

All

Ltd

dollars

GBR and

are

is

US

distributed

unless otherwise

in the USA

stated.

by Asendia USA,

701C Ashland Avenue, Folcroft, PA 19032 and

additional mailing offices. Periodicals postage paid at

New Brunswick NJ. POSTMASTER: send address

changes to International Forest Industries, 17B South

Middlesex Avenue, Monroe NJ 08831

© International Forest Industries Ltd 2007 – 2023

IFI uses, as preference, SI units throughout.

All dollars are US unless otherwise stated.

EDITORS COMMENT

Demo International Forestry Equipment

show & Conference heads to Ottawa/Gatineau,

Sept 17-21, 2024!

Registration open for premier industry event

OTTAWA/GATINEAU - The anticipation

is palpable as DEMO International, the

premier forestry equipment exhibition,

gears up to make its mark in the

picturesque capital region of Ottawa/

Gatineau from September 17-21, 2024.

Organized by the Canadian Woodlands

Forum, DEMO International is the

quintessential event for forestry

professionals, showcasing the latest

innovations and technologies in action

amidst the stunning woodland backdrop.

As part of the festivities, the DEMO

International Preconference will kick off at

the Delta Ottawa City Centre on September

17-18, offering attendees an unparalleled

opportunity to delve deeper into key

industry topics. From presentations on

research, automation, and digitalization

to discussions on logging and trucking,

biodiversity, and sustainability practices,

the pre-conference promises to be an

enriching experience for all participants.

Additionally, insights into international

forestry outlooks from Sweden and Finland

will provide valuable perspectives on

global forestry trends and best practices.

Mark your calendars as registration for

both the preconference and the main

DEMO International event is open,

offering attendees the chance to immerse

themselves in a week-long celebration of

forestry excellence.

DEMO International is renowned for

its dynamic demonstrations of cuttingedge

forestry equipment, providing

attendees with a firsthand glimpse into

the future of the industry. From stateof-the-art

machinery to groundbreaking

technologies, exhibitors will bring their

products to life, demonstrating their

capabilities live in the woods.

Hosted by SBC Cedar, a prominent

player in the forestry sector, this year’s

DEMO International promises to be an

unforgettable affair. Stay informed and

follow along for future announcements

and event information by visiting

DemoInternational.com.

For further information, please contact:

Becky Geneau Executive Director Canadian

Woodlands Forum

Becky.geneau@cwfcof.org

ROBIN PEACH

EDITOR


4

BRAKING

SYSTEMS

Electronic Pedal Control

Advanced Brake-by-Wire Solutions

for the Global Off-Highway Industry

from ZF

Intelligent braking

portfolio provides

turnkey solutions for offhighway

customers

• ZF’s electrohydraulic

braking solution supports

rapid transition to electric

and autonomous vehicle

applications

• Scalable technology

offers ease of installation,

adaptable brake pressure

ZF’s Industrial Technology

Division is introducing its

new brake-by-wire solutions.

A global leader in hydraulic

and electrohydraulic braking

systems, ZF supports

customers in the heavy duty,

off-highway, construction,

mining, and agriculture sectors

with safe and efficient brake

technology.

Electrohydraulic Brake Valve

The company’s newest

brake-by-wire solution is

an important step change,

as it provides vehicle

manufacturers the ability

to control deceleration via

an electronic signal that

adjusts brake pressure when

needed, removing the need for

hydraulic lines in the cab and

evolving towards remote and

autonomous operation.

As the off-highway market

continues its transition from

mechanical to intelligent

braking technology, the new

brake-by-wire system offers a

universal solution that is easily

scalable. Safety and vehicle

architecture are key drivers for

ZF customers when designing

their brake systems, and this

new technology can help them

achieve those goals.

The system is comprised

of three components:

an electronic pedal,

electrohydraulic brake valve

and a universal controller.

Together, the system offers

vehicle manufacturers ease of

installation, electrohydraulic

brake valves for precision brake

control and adaptable pedal

response/brake feel that can

be customized to fit a vehicle’s

brand identity. It also provides

key operator benefits including

reduced cabin noise, and

passenger car-like comfort for

brake feel.

ZF’s experience in

motion control technology

for passenger cars and

commercial vehicles enables

the Group to shape the

future of electrification for

these important off-highway

market sectors. The intelligent

braking portfolio not only

provides turnkey solutions for

customers in this sector today

but also supports their shift

to electric and autonomous

applications in the future.


573

TAKE CONTROL

Introducing the Tigercat 573. A powerful, triangulated three-wheel drive harvesting head for fast

picking, positive control, and precise measuring. Versatile for roadside processing and in-stand

harvesting. Excellent performance and productivity in medium to large sized timber.

Match the power and performance of Tigercat carriers with

an end-to-end Tigercat factory solution.

www.tigercat.com

Scan to learn more

After 18 years in the country, Ponsse’s fleet

exceeds 500 pieces of equipment sold in Brazil

Ponsse turned 18 in Brazil

in May and celebrated its

anniversary by celebrating

more than 500 pieces of

equipment, including heads,

harvesters and forwarders,

delivered in the country during

this period.

In the first quarter of 2024

alone, approximately 20

new Ponsse machines were

delivered to customers and

are already working in the

country’s cultivated forests.

The company that began

its activities in Finland in

1970, opened its Brazilian

subsidiary in 2006. At the

time, only Ponsse heads began

operations, with assembly at

the unit established in Mogi

das Cruzes-SP. “Brazil is one

of the largest forest producers

and we believe it can become

even more representative

within our client scenario”,

said Janne Loponen, director of

Ponsse Brasil.

Hopscotch in the country

Since its founding in 2006,

Ponsse Latin America, which is

the corporate name of Ponsse

Brasil, has sold more than 500

pieces of equipment, including

harvesters, forwarders and

heads, as mentioned above.

Currently in operation, it

is estimated that there are

approximately 400 “hopscotch

machines” (in reference to

the color of the brand on the

machines). Ponsse currently

holds a share of around 35% of

the forestry machinery market

in Brazil.

The expectation for this

year, according to Ponsse

Brasil’s Commercial Executive

Manager, Rodrigo Marangoni,

is for a more moderate growth

in the number of new orders,

mainly due to the cellulose

market. In the first quarter

alone, almost 20 pieces of

equipment were delivered

to Brazilian customers.

“The forestry machinery

market in Brazil follows the

same movement as the pulp

market. The expectation is

that the growth percentage

will increase, as world pulp

consumption also grows,” said

Marangoni.

Relevance of Brazil for Ponsse

Brazilian forestry producers

are more than just customers

for Ponsse. The reality found

in operations here is different

from others in the world

and challenges the creation

of robust, effective and

economically viable equipment.

The director of Ponsse Brasil

gave examples of equipment

that had great participation

from Brazilian producers in

the development: the PONSSE

H7HD Euca and PONSSE H8HD

Euca heads are high-tech

equipment with workload

capacity, ideal for the country’s

high demand.

Furthermore, there are

Ponsse developments aimed

at the Brazilian market, such

as the Harbunk, which is the

combination of a PONSSE Bear

harvester with a ClamBunk

clamp, ideal for cutting,

dragging and processing in

special areas, such as plots

of up to 10 thousand tons

of wood. ; and Multifleet by

Ponsse, which is a system

capable of integrated data

management from various

types of equipment and

different brands on a single

platform, facilitating data

analysis and management of

the forestry chain.

“Ponsse is a company that

develops its machines listening

to the real needs of the field.

We work side by side with

customers to understand and

bring solutions that really make

a difference. Furthermore, our

developments are driven by

technology and aligned with

sustainable development”,

Loponen said.

The director adds that, even

having started operations in

2006 with just head sales,

PONSSE H7HD Euca

PONSSE Mammoth

in just 18 years, Brazil has

become a reference in the

forestry market, adding not

only harvesting heads, but

purpose built machines , too.

This demonstrates, according

to Loponen, the gain of

confidence in the Brazilian

forestry sector, not only within

Ponsse, but throughout the

sector around the world.

Janne Loponen

General Director Ponsse Brasil

“Today, the country is one

of the great promises in the

cultivation of sustainable

forests and also has

operational challenges that

guide the development of new

technologies.”


The new high-performance chain

biolubricant for forestry applications

Engineered for full chain lubrication to provide

an active barrier against sawdust and dirt.

Helping to protect your equipment for longer!

CHAINSAWS

SAWMILLS

HARVESTERS

Internationally acclaimed iF DESIGN AWARD 2024

given to the PONSSE Opti 5G information system

Granted since 1954, the iF

DESIGN AWARD is one of

the most significant and

prestigious design awards

in the world. The globally

recognised iF DESIGN AWARD

is considered a symbol of

outstanding design. The award

winners werecelebrated at

the iF DESIGN AWARD NIGHT

2024 event at Friedrichstadt-

Palast in Berlin in Germany on

Monday 29 April 2024.

The jury paid particular

attention to the functionality

and usability of the PONSSE

Opti 5G information

system. The user interface

makes the forest machine

operator’s work easier and

HIGH-TECH

MOBILE WOOD-CHIPPING

SOLUTIONS

We offer a wide range of:

• Tractor driven PTO Chippers

• Truck driven chippers “Hack-Truck”

• Diesel engine driven chipper units

Follow us

100%

MADE

IN AUSTRIA

www.mus-max.at

produces other harvesting

information, including operator

working hours, production,

machine operation and fuel

consumption.

“The Opti 5G system is

designed to be easy to use to

reduce the cognitive load of

the forest machine operator

and improve productivity. The

user interface was completely

rethought in our project to

meet the users’ needs in the

forest industry of today and

the future. Design based

on a user study and the

large-scale testing of results

are key factors behind the

development of Opti 5G,” says

Juha Inberg, Chief Technology

and R&D Officer at Ponsse.

“During the project, we

addressed the needs of forest

machine operators, machine

owners, maintenance services

and sawmills,” says UX

Manager Panu Johansson.

“This award is for everyone

who has participated in the

software development of

the 5G system. Software

development is almost always

the result of the efforts of a

large group of people. Software

is at the core of modern forest

machines to facilitate the use

of the machine and make their

operation more efficient. The

user experience also plays an

important role in improving

efficiency, coping and comfort.

Development at Ponsse

focuses on understanding user

needs,” says Inberg.

Further information:

Juha Inberg, Chief Technology

and R&D Officer, Ponsse Plc


Sharpens.

Harvester.

Chains.

#teamfranzen2024

recommended by

www.franzen-machines.com

FORKLIFT TRUCKS

Branching out with Combilift

Following the launch of

five new models in its

25th anniversary year

in 2023, Irish Materials

Handling Specialist

Combilift has already

announced the premiere

of yet another innovation.

The Combi-CLL (Container

Log-Loader) was recently

exhibited at EXPO

Richmond 2024, one of

America’s leading trade

shows for the forest

products industry.

The concept and operation

of the Combi-CLL is based

on that of the Combi-

CSS (Container Slip Sheet),

which has been successfully

deployed across numerous

industries for the mechanised

loading of long products such

as packs of timber or steel

into containers. This not only

reduces the risk of accidents

to the workforce and product

damage but is incredibly fast

compared to other methods

– a 40’ container can be fully

loaded by one operator in

under 6 minutes.

The 30t capacity electrohydraulically

powered Combi-

CLL offers the same benefits

when it comes to speed,

safety and product integrity.

It was designed to address

the requirements of exporters

of softwood and hardwood

logs, the nature and shape of

which make them much trickier

to handle than palletised or

packed products. Logs can be

individually lifted and preloaded

into a robust, highsided

metal “tub” before the

patented push-pull mechanism

powers the tub into the

container. Once inside, the

hydraulic dropdown hatch is

closed and locked into position

to hold the logs securely in

place, and the tub is retracted

to allow the logs to settle

within the container.

Once again, Combilift has

come up with a customer-led

solution that also has potential

for applications beyond the

forestry industry.

Watch the video here:

https://youtu.be/1H_78Oqtlvs

?si=26BQh095DnNQTHz_

For more information, please

visit: https://combilift.com/

combi-css-log-loader/

www.combilift.com

Pettibone Extendo 1056X

10,000-Pound-Capacity Telehandler

BARAGA, Mich. —

Pettibone offers

the Extendo 1056X

telehandler, providing a

10,000-pound-capacity

machine capable of

reaching lift heights

of 56 feet.

This Extendo unit builds

upon Pettibone’s tradition

of rugged design while

offering numerous performance

improvements.

The Extendo 1056X features

a 117-horsepower Cummins Tier

4 Final diesel engine. A Deutz

74-horsepower Tier 4 Final

engine is optional. Mounted on

a side pod, the engine offers

easy service access while

allowing excellent visibility and

ground clearance of 18 inches.

Featuring a four-section

boom, the 1056X delivers

maximum lift capacity of

10,000 pounds, max forward

reach of 40 feet, and max lift

height of 56 feet, 6 inches. The

boom structure’s formed plates

offer greater strength while

reducing weight. The design

also minimizes boom deflection

for better control and accuracy

when placing loads. Abundant

boom overlap provides smooth

operation and reduces contact

forces on wear pads.

The Extendo 1056X comes

standard with X-Command®, a

Pettibone telematics program

that offers real-time access to

machine data, thereby saving

time, money and hassle for

rental centers and maintenance

technicians.


FOR MORE INFORMATION, PLEASE CONTACT:

MARK CUSACK

National Show Manager

mcusack@mpltd.ca • 506.333.1064

ANDREW BURNS

Exhibit Sales

aburns@mpltd.ca • 506.649.0025

Visitor Registration Coming Soon

Stay tuned to Social Media and

www.DEMOInternational.com for updates


CP Automation partners with Tele Radio to offer

expanded wireless and radio control support

To expand its range of wireless

and radio remote controls,

crane and hoist control

specialist CP Automation has

agreed a new partnership

with Tele Radio in the UK and

Ireland. After two years of

conversation and negotiation,

the two companies are now

officially partners. Following

the new agreement, CP

Automation will now supply the

Swedish original equipment

manufacturer’s extensive range

of radio controls, which can

support various crane and

lifting applications.

Following the new

agreement, CP Automation

will now supply the

Swedish original equipment

manufacturer’s extensive range

of radio controls together with

existing product ranges, which

can support various crane and

lifting applications. Tele Radio’s

range offers reliable and

flexible products customizable

to all kinds of specific crane,

lifting and hoisting needs.

When installed, the Tele Radio

remote controls can improve

safety in industrial applications

by enhancing operator control

from a safe distance.

“This new agreement

is the result of months of

collaboration, negotiation,

trust, and respect between

ourselves and Tele

Radio,”explained Andy Swann,

global business manager for

cranes & power transmission at

CP Automation. “Like us, Tele

Radio is a growing business

of experienced engineers

and specialists that put their

customers first and pride

themselves in the dependable

products and support that they

offer.

“Tele Radio was very open

with us and, by its admission,

cranes are not an industry that

the company solely specialises

in, so it was actively looking

for a partner,” added Swann.

“We’re a natural fit and,

together, we can now provide

greater technical support,

back-up, and product choice for

Tele Radio’s product customers,

which CP Automation will

manage using its market and

product expertise.”

“Power and motion control

is key to any material handling

system or application —

especially those involving

overhead cranes and hoists,”

added John Mitchell, global

sales and marketing director

at CP Automation. “As well as

cranes, we’ll be introducing

Tele Radio’s controls to our

elevator customers and those

working in our other core

industrial markets, so that

they can also benefit from

the improved control these

products provide.”

“Having had the opportunity

to meet the team at CP

Automation and to get to know

them over the past two years,

I know the word partnership

means more to us than just a

contract,” added John Suero,

managing director at Tele Radio

United Kingdom & Ireland.

“It means that we are fully

committed to each other’s

success.”

Tele Radio Group is a

multinational company that

develops, markets and supplies

universal, wireless remote

controls and tailor-made

wireless solutions for industrial

use. The products contribute to

a more comfortable and safer

work environment.

Media contact Shietel

Bhaggan |

marketing@tele-radio.com

Andy Swann, global business

manager for cranes & power

transmission at CP Automation

John Suero, MD at Tele Radio

United Kingdom & Ireland.

John Mitchell, global sales

& marketing director at CP

Automation

LEEA Leads High Quality #GLAD2024

The Lifting Equipment Engineers Association (LEEA)

has moved products, inspection, and training to the

front of its Global Lifting Awareness Day (GLAD)

campaign.

https://globalliftingawarenessday.com/


LOAD LOGS

25

INTO A

CONTAINER

IN 6

MINUTES

WITH

COMBILIFT.

THE COST EFFECTIVE SOLUTION FOR

LOADING LOGS INTO CONTAINERS

Introducing the Combi-CLL Log Loader, based on the highly

successful Combi-CSS Container is incredibly fast compared

to other methods. It can fully load logs into a 40’ container in

under 6 minutes to a 30t capacity. The risk of accidents to the

workforce is minimised and product damage is eliminated.

The Logs are pre-loaded into the robust, 40’ long high-sided

Tub. The patented push-pull mechanism powers the loaded

Tub into the container. Once inside, the Hatch is closed to hold

the logs securely in place, and the Tub is retracted.

CONTACT US TODAY

To find out how Combilift can help you unlock every inch of your

storage space.

combilift.com

Tidewater hosts

spectacular

Demo Day 2024

Tidewater Equipment’s

third demo day was the

culmination of years

of careful planning.

The event took place

on a beautiful spring

day at the Langdale

farm outside Valdosta,

Georgia, a key region

where Tidewater has

a strong support

presence and a high

concentration of forest

industry customers.

Following previous demo

days in 2015 and 2017, this

was Tidewater’s largest

and best attended ever. 1,600

visitors attended the one-day

event that featured an all-

Tigercat live demonstration,

21 Tigercat machines on static

display, food trucks, and games

and entertainment aimed at

men, women and children of

every possible age group.

The live demonstration

was operated by Tidewater

Equipment customer Sandlin

Forest Products and featured a

620H skidder, 234B and T250D

loaders, a 720G feller buncher

and a 6900 grinder. In addition

to the feller bunchers, skidders

and loaders common to the US

South, the static machines on

display included the TCi 920

dozer, a 480B track mulcher,

and the 865 and 875E loggers.

The Tigercat simulator, with

its new track feller buncher

program, was a big draw at the

event and saw a constant flow

of traffic by attendees of all

ages.

Tigercat brought 57 people

to the event including field

representatives, product

managers, designers, and

key senior-level management

personnel. It was an excellent

opportunity to interact directly

with customers, as well as

Tidewater sales and technical

representatives. Nothing beats

first-hand feedback and an

exchange of ideas in a relaxed

and welcoming setting. “I

congratulate the Tidewater

and Tigercat crews who

worked diligently to set up this

event, and of course, first and

foremost, our customers,” says

Tigercat founder and president

Ken MacDonald. “Without

them, there is no reason for the

rest of us. This is simply the

best way to meet and get to

know our customers.”

Tidewater president Jamie

Young comments, “The turnout

has been spectacular. The

weather has been spectacular.

It’s been a blessing to

Tidewater and our customers,

and we are very grateful to

have the turnout we have. It

was critical for us to show not

only customers that we are

different but our own team. We

are trying to be the best dealer

we can possibly be.”

“A venue of this magnitude

takes years to plan, and I’ll say

the Tidewater group certainly

hit a homerun. Visiting and

spending time with the

team from one of our largest

business partners and Tigercat

customers from the five states

they represent all at one venue

was invaluable. This demo was

probably the most impressive

event I have attended in my 25-

year career at Tigercat. Thanks

to the Tidewater team and

our customers for making the

demo a memorable event and

a huge success,” says Tigercat

US sales manager, Kevin Selby.


The Future

of Forestry

Modern forestry applications must first and foremost reduce

fuel consumption and minimize emissions. No matter the power

source, conventional or alternative fuels, hydrogen or electrification:

ZF is contributing to reducing emissions from less to zero.

Efficient, tough, silent: this is how we envision future operation in forestry. With

future-proof CVT technology, braking systems, and driveline solutions in the field of

electrification, we are making this vision a reality today. ZF.com/construction

SAWLINES

Acon Timber: The first

MiCROTEC Logeye with

X-ray capabilities in South

America

Acon Timber, the

Argentinean sawmill of

the Austrian HS Timber

Group, celebrated

the inauguration of

its production site in

Gobernador Virasoro,

Corrientes, in April.

The plant designed for the

processing of regional

pine (pinus taeda and

pinus elliottii) wood has an

annual production capacity of

370.000 m3 dry sawn timber.

The state-of-the-art sawmill

operates according to the

zero-waste principle, meaning

that 100% of the raw material

is used in the production

process. This commitment to

sustainability is supported

by MiCROTEC solutions

that ensure the best use of

wood, which also reflects the

continuation of the longstanding

partnership between

MiCROTEC and the HS Timber

Group.

First Logeye including X-ray in

South America

This project signifies a

remarkable advancement

in South America’s forestry

industry with the introduction

of the region’s first Logeye

equipped with X-ray

capabilities. The multi-sensor

scanner combines the data

from laser, color, and X-ray

sensors to provide real 360°

shape of the log. Based on this

it measures a stable underbark

volume of the logs throughout

the variation of external

conditions such as humidity or

seasonal changes and provides

data for the sorting based also

on the internal features of the

logs such as the dimension of

knots.

The Logeye works together

with the Winlog sorting and

control system that uses the

data for accurate tracking

and sorting of the logs.

Additionally, it visualizes

the infeed and sorting line

according to personalized

parameters and allows

the management of stock

targets, suppliers, shifts,

and downtimes according to

customized needs.

Extensive R&D efforts are

rewarded with success

The Logeye underbark

measurement has been made

possible by the extensive

research and development

efforts involved in the project.

Even training data collected

by the unique MiCROTEC CT

Log has been used to train the

Logeye to reliably recognize

the underbark diameter of

logs independently. This

highlights the capabilities of

the MiCROTEC Ai platform,

showing the advantages of

cross-learning.

Recurring trust in Goldeneye

Acon Timber’s planer mill is

equipped with a Goldeneye

Transverse scanner for accurate

sorting and trimming from all

four sides that runs at a speed

of 200 boards per minute. With

its multi-sensor approach the

scanner integrates color, laser,

and grain deviation images

into one overlapping, multidimensional

image, that allows

the detection of defects such

as knots, splits, bark, wane,

and twist of boards.

The Goldeneye works

together with the control suite

Variosort and is fully integrated

in the planer line provided by

Springer. Additionally, an M3

Scan measures the moisture

content of the lumber while

a Warpscan measures its

geometry to outsort nonconforming

boards.

The Goldeneye has already

been installed in previous

projects with the HS Timber

Group and although the

wood species is different this

time, the implementation has

been going smoothly and the

installation was completed

rapidly so that it has been

operational early on.


Introducing Sawbox: The innovative Wood Processing solution

Cutting capacity: Up to 8.5 million board feet of wood in two-shift operation.

Log diameter: 10 to 42 in, Lengths: 10 to 16 ft 2 in (20 ft on request)

100% self-sufficiency: Cut your own logs, optimize production costs.

Space-saving: Optimal use of operating area from 5,400 ft² to a maximum of 10,800 ft².

Long-term predictable prices: Own production ensures stable product prices.

Sustainability and regional value creation: Use of local wood, recycling of all wood waste.

Green footprint: up to 75% yield, maximizes log usage.

Innovative solutions for the North American

wood-processing industry

www.springer-usa.com International Forest Industries | JUNE / JULY 2024 19

SAWLINES

Mini Canter Profiler

In the ever-evolving

landscape of wood

processing, it’s no

surprise that efficiency

and precision are

paramount. Every

mill operator seeks

solutions that not only

streamline operations

but also enhance output

quality. In this pursuit,

BID Group presents

two groundbreaking

innovations

revolutionizing sawlines

and operations: the Mini

Canter Profiler and the

CETEC Twin Bandsaw

featuring the new on-thefly

maintenance system.

BID Group’s Sawline

Excellence Redefines

Wood Processing

BID’s Mini Canter Profiler

Compact yet powerful, the

Mini Canter Profiler stands tall

as the pinnacle of efficiency

in wood profiling and curve

sawing, making it the ideal

choice for space-conscious

mills.

Features Driving Performance

The design of the Mini

Canter Profiler combines the

canter and profiler within a

single module, along with

a guillotine press roll feed

module, creating a compact

curve sawing system. This

innovative setup not only

saves space but also enhances

efficiency by streamlining

the cutting process. With

three distinct feed modules

providing a robust grip on

cants during cutting, precision

and consistency in output are

ensured. Advanced hydraulic

force control technologies

further optimize performance

by applying the optimal

pressure on each cant,

guaranteeing precise cuts, and

minimizing waste. Sold with

Comact-branded secondary

breakdown scanners,

optimizers, and PLC systems,

the Mini Canter Profiler offers

a comprehensive solution

for maximizing efficiency

and output quality in wood

processing operations.

Benefits at a Glance

• Seamless Integration: The

Mini Canter Profiler’s ultracompact

design ensures

seamless integration

into existing mill setups,

minimizing disruptions and

maximizing productivity.

• Enhanced Efficiency: By

eliminating the need for

boards to return to the

edger, this innovation boosts

sawmill efficiency, optimizing

resource utilization and

reducing processing times.

• Swift ROI: With its rapid

results and tangible impact

on operations, the Mini

Canter Profiler ensures a

swift return on investment,

empowering mill owners

to reap the benefits in

record time.

BID Group’s CETEC Twin

Bandsaw – Featuring the

New On-The-Fly Maintenance

System

Traditionally, changing a

blade in a wood processing

line meant halting operations

entirely, a costly and timeconsuming

endeavor. However,

with the CETEC Twin Bandsaw,

BID Group introduces a

game-changing solution that

eliminates downtime without

compromising safety or quality.

Key Advantages:

• On-the-fly maintenance:

Unlike conventional

bandsaws, the latest CETEC

Twin and Quad Bandsaw

design enables blade

changes during operation,

thanks to its innovative saw

change system. This feature

not only minimizes downtime

but also eliminates financial

losses associated with

production halts.

• Enhanced safety: With

separate hydraulic units

and a rear-opening bandsaw

design, operators can safely

perform maintenance tasks

on one side while the other

side continues cutting

lumber, automatically

shielded from potential

hazards. While competitors

may overlook such safety

measures, at BID Group,

safety is non-negotiable.


Bandmill changed

during production

• Operational Efficiency:

The ability to continue

sawing while conducting

maintenance tasks translates

to unparalleled operational

efficiency. Whether it’s

checking lubrication,

inspecting components,

or replacing valves, the

CETEC Twin Bandsaw keeps

operations running smoothly.

While it may require slightly

more space and installation

complexity compared to

traditional bandsaws, the

CETEC Twin Bandsaw’s ability

to operate continuously

without interruptions makes

it a coveted asset in the

wood processing industry.

More benefits of the CETEC

include the following:

• Cutting-edge sensors

continuously track the saw’s

position on the wheels,

automatically adjusting

wheel tilt and strain to

ensure precise blade

tracking.

• Superior recovery rates

thanks to thin kerf

technology.

• Reliable performance

ensured by its double

column frame designed for

high-strain tensioning and

zero cantilever.

Integrated Solutions for

Optimal Performance

Both the Mini Canter Profiler

and the CETEC Twin Bandsaw

are not standalone solutions

but integral components of BID

Group’s offerings. Coupled with

state-of-the-art PLC systems

and optimization technologies,

these innovations represent an

approach to wood processing,

where efficiency, precision, and

safety converge to redefine

industry standards.

As the wood processing

industry navigates the

challenges of modernization

and optimization, BID

Group stands as a beacon of

innovation, offering solutions

that not only meet but exceed

the evolving needs of mill

operators. With the Mini Canter

Profiler and the CETEC Twin

Bandsaw leading the charge,

the future of wood processing

looks brighter than ever. For

more information, contact us at

info@bidgroup.ca.

CC02 & CC04

VIBRATION

RESISTANCE

HIGH IMPACT

Works with IP PoE

Networking, HDTVI and

Coax Analog

800.578.1853

opticomtech.com


SAWLINES

Sawbox - from

debarking via

scanning to

stacking

Introducing SAWBOX: Revolutionizing

the North American Lumber Industry

From Log to Lumber

with One Operator

The lumber industry

is on the cusp of

a technological

revolution, and

SAWBOX is leading

the way with its

groundbreaking ability

to turn logs into lumber

with just one operator.

This innovative sawmill

solution is designed

to meet the needs of

modern wood processing

operations, providing a

compact, automated system

that ensures efficient, high

quality lumber production.

Most importantly, the SAWBOX

allows you to process

diameters up to 42 inches

that you would not be able

to handle in your normal

production operations. For

businesses in North America

the SAWBOX promises to be

a game changer, delivering

benefits that are too significant

to ignore.

Key Benefits of SAWBOX

• Self-Sufficiency

One of the outstanding

features of SAWBOX is its

ability to make companies

self-sufficient. By allowing

companies to cut their own

logs, SAWBOX helps optimize

production costs and ensures

a steady supply of raw

materials. This level of control

over the production process

can significantly improve a

company’s profitability and

operational efficiency.

• Cost-Effective Investment

Setting up a SAWBOX is

much more affordable than

traditional sawing technology.

The reduced investment costs

make it possible for smaller

companies to own and operate

their own sawmills, paving the

way for greater autonomy and

financial stability.

• Increased vs Enhanced Yield

and Efficiency

SAWBOX is designed to

maximize the use of each log,

achieving yields of up to 75%.

This high level of efficiency

not only reduces waste, but

also increases the overall

production, making the most of

the available resources.

• Sustainability and Regional

Added Value

SAWBOX supports the use of

local wood and the recycling

of all wood waste, promoting

sustainability and boosting the

local economies. By sourcing

wood locally and minimizing

waste, companies can reduce

their ecological footprint and

contribute to sustainable

forestry practices.

• Predictable Pricing

With SAWBOX, companies can

enjoy long-term stable product

prices by controlling their

own production processes.

This predictability is crucial

for maintaining competitive

pricing and ensuring customer

satisfaction in a fluctuating

market.

• Impressive Cutting Capacity

The SAWBOX can process up

to 8.5 million board feet of

lumber in a two-shift operation.

It accommodates logs from 10

to 42 inches in diameter and

from 10 to 16 feet 2 inches

(on request 20 feet) in length,

available upon request. This

versatility makes it suitable

for a wide range of lumber

dimensions.

• Space Efficiency

SAWBOX is designed to fit into

spaces ranging from 5,400 to

10,800 square feet, allowing for

optimal use of available space.

This compact footprint is

perfect for companies looking

to maximize their production

capacity without the need for

large, sprawling facilities.


Embrace the Future with

SAWBOX

For North American wood

processing companies, the

benefits of adopting SAWBOX

are clear. Whether you are

a sawmill, CLT or a gluelam

facility, integrating the

SAWBOX into your production

line can lead to significant

improvements in efficiency,

cost savings, and sustainability.

As the industry continues

to evolve, staying ahead of the

curve is essential. Discover

how SAWBOX can transform

your business, making it more

competitive and resilient in

a rapidly changing market.

By investing in SAWBOX, you

will not only improve your

manufacturing capabilities,

but also contribute to a more

sustainable and economically

vibrant community.

Explore the possibilities

of SAWBOX and take the first

step towards a more efficient

and sustainable future for your

wood processing business.

About SPRINGER

The family-owned company

located in Austria (Europe),

Greer (USA) and Nanaimo

(Canada), plans, develops, and

produces machines and state

of the art solutions for the

The optimized cutting process of Springer´s Sawbox

Machining Center

wood processing industry.

All processes, such as

transporting, sorting, grading

of wood, and automation,

are implemented at the

highest technological level.

Special attention is placed on

sustainability. The climateneutral

company employs more

than 500 people worldwide

and is managed by the third

generation of the Springer

family, Timo Springer and

Gero Springer.

www.springer-usa.com

Sorter, Stick Laying, Stacking

1 Logs, 2 Debarker, 3 Machining Center, 4 Sorter, 5 Robot on Linear Axis, 6 Lumber packages


SAWLINES

Isojoen Saha invests in

the future with a new

sawmill line

Isojoen Saha Oy is

constructing a new

main sawmill line. The

investment is one of the

largest in the company’s

history and continues

the sawmill’s long-term

development program.

The new modern main

sawmill line will diversify

and enhance Isojoen Saha’s

production. For example, wood raw

material can be utilized even better

and more accurately in the future.

“Our product range will also

diversify. The sawmill line enables

more customer-oriented products

and wider markets,” explains CEO

Esa Hakamäki.

Construction work on the

new premises for the sawmill

line started in May 2024 and

will be completed in early 2025.

The sawmill line itself will be

commissioned in stages during

2025. The new main sawmill line

will replace the current one.

The investment brings

positive employment effects to

the region. Local companies,

such as EP-insinöörit Oy and

Rakennuspalvelut T Kiukkonen Oy

from Kauhajoki, are responsible

for the construction work, and

several local subcontractors are

involved in the project. The sawmill

line will be delivered by Veisto Oy.

Other equipment suppliers are also

mainly domestic.

“The multiplier effects of

the new main sawmill line are

substantial. The investment

secures Isojoen Saha’s operations

far into the future, which is

significant for the entire region’s

economy. We are proud of

this investment in sustainable

development and the vitality

of our region. We want to be a

reliable employer and partner

for local forest owners and other

stakeholders in the future as well,”

says Hakamäki.

Isojoen Saha was founded in

1949, and the first logs were sawn

at the same location 75 years

ago. Production will continue on

the current lines throughout the

construction period, so there will

be no interruptions in deliveries.

The investment in the new main

sawmill line is co-financed by the

European Union.

Esa Hakamäki, CEO of

Isojoen Saha

The new main sawmill line in

a nutshell

• The area of the property to be

built is 2,200 m2

• The property includes sawmill

feeding, the new sawmill line, byproduct

handling from sawmill

production, and a feeding and

intermediate storage system for

green sorting of sawn timber

• Construction period 2024–2025

• The new main sawmill line will be

commissioned in Isojoen Saha’s

75th anniversary year 2025

New Canadian order for RemaSawco

RemaSawco works with

a partner in Canada

who has now signed an

agreement with a North

American customer

where RemaSawco’s

order value amounts to

approximately

SEK 3 million

For several years now,

RemaSawco has

collaborated with a

partner in Canada who has

now signed an agreement

with an end customer in the

USA. RemaSawco’s part of

the agreement concerns the

licensing of RemaSawco’s

world-leading system for board

scanning, RS-BoardScannerQ,

which can be used in all parts

of the board handling process

at a sawmill. The agreement

also includes technical support

during commissioning.

Delivery, installation and

commissioning are planned for

the third quarter of 2024.

“Just like in Sweden and the

rest of Europe, North America

has also suffered from limited

availability of raw materials,

which results in higher raw

material prices. We now note

that more and more customers

are discovering the benefits

of our market-leading board

scanner and what it can do for

more efficient board sorting

with higher yields using correct

optimization” says Emilien

Saindon, CEO RemaSawco AB

Emilien Saindon, CEO

RemaSawco AB


MORE THAN MECHANICS

www.jartek.fi

International Forest Industries | JUNE / JULY 2024 2023 25

Frøslev Træ’s own thermally modified wood production

enhances service level and flexibility – demand keeps

growing

Frøslev Træ is one of Denmark’s

largest timber suppliers. The

company supplies timber

and various processed wood

products not only for the

construction industry but

also for retailers. Operating in

southern Denmark, near the

German border, the company

processes timber and supplies

processed wood products to

its home country and to the

German market, as well as to

12 other countries.

In 2016, Frøslev Træ

decided to add thermally

modified wood to its product

range. Initially, the demand

was low. According to Jørgen

K. Johansen, the company’s

operational director, the

COVID-19 pandemic resulted

in significant growth in the

construction industry adding

to an already prevalent trend of

biocide free wood treatments,

as a result of which demand

for thermally modified wood

surged. Frøslev Træ had bought

thermally modified wood in

smaller quantities from various

suppliers and could no longer

supply customer demand.

The Idea of Own Production

Emerged from High Demand

As demand for thermally

modified wood skyrocketed,

Frøslev Træ conducted a small

market survey in the Danish

market to understand the

demand. The survey indicated

a growing preference for

environmentally friendly

and aesthetically pleasing

thermally modified wood

material. Encouraged by this,

the company began exploring

opportunities to start its own

production, leveraging its

extensive experience in wood

processing and treatment.

Through these explorations,

Jartek and Frøslev Træ entered

into discussion. Frøslev Træ

was convinced by Jartek’s

experience in delivering

industrial-scale production

facilities. What was seen as an

additional advantage according

to Johansen, was that the

thermally modified wood

produced in Jartek’s kilns could

be assigned the respected

ThermoWood® product

name. This ensures that the

end product is of high quality

and stability. ThermoWood®

retains its dimensions and

shape exceptionally well

regardless of moisture

conditions in comparison to,

for example, classical biocidal

pressure-treated wood.

The Environmentally Friendly

Production Process Was

Planned Together

Once Frøslev Træ decided to

establish a production facility

with Jartek’s equipment,

the planning work began

in collaboration. Jartek’s

staff visited the site of the

production facility. The

production facility was planned

in a way that the harmful gases

generated during the treatment

process are burned within the

production facility rather than

being released directly into

the atmosphere. If released

directly, these gases would

cause unpleasant odor among

other environmental issues.

ThermoWood® is

treated only with heat,

steam, and water and is

therefore inherently more

environmentally friendly than

wood that has been treated

with biocides. By not releasing

gases into the air, this

process becomes even more

environmentally friendly.

Demand Increases – Another

Production Facility Project

Initiated

The first production facility

began production in the

spring of 2022, and shortly

thereafter, a deal was made for

a second production facility.

Frøslev Træ’s customers prefer

thermally treated wood to

such an extent that currently

one-fifth of the company’s

turnover comes from


ThermoWood®. With its own

production, Frøslev Træ has

also improved its service level

– being able to deliver from its

own warehouses means that

delivery times are shorter and

transportation emissions have

decreased.

Harri Puolanne, Jartek’s

business director responsible

for the project, believes that

the high demand of thermally

modified wood is also due to

the beautiful appearance of it,

as beautiful architecture and

timber construction are valued

in Denmark.

Jartek’s Experts Always

Supervise Installations

According to Puolanne, there

were no difficulties during the

construction of either of the

thermal treatment kilns. The

design and installation of the

equipment went smoothly, and

the kilns have been operating

without issues in Denmark.

Jartek stayed on schedule,

and cooperation with Frøslev

Træ and subcontractors was

effortless.

Jartek’s own staff always

oversee the installation

Jørgen K. Johansen, the

company’s operational

director

Harri Puolanne, Jartek’s

business director

Thermowood Kilns at Jartek

Invest Oy

and commissioning of the

production facility – this time,

Puolanne was present himself

to ensure that everything

went as planned. In Europe,

Jartek also utilizes its own

subcontractors for installation

HALCO AD:Layout 3 3/8/10 17:22 Page 1

work, while in projects

conducted further away, local

subcontractors are used.

The Future of Processing Lies

in Products Like Thermally

Modified Wood

Both Johansen and Puolanne

state that the collaboration

has been excellent. Johansen

praises Jartek for managing

the entire process from project

management to maintenance

support. Both Frøslev Træ

and its customers have been

satisfied with the quality of

the end product. According to

Johansen, the environmentally

friendly ThermoWood®

material with its excellent

properties is of interest to

customers.

Frøslev Træ plans to further

increase the share of thermally

modified wood in its production

and sales and to continue

the fruitful cooperation with

Jartek. Johansen sees the

future of wood processing

in environmentally friendly

and sustainable processes

such as the production of

ThermoWood®.

Optimise your

production plan...

www.halcosoftware.com

Optimise your

operations

Whatever your mill...

Maximize profit by resolving trade-offs

between recovery, production rate, and value

OVER

25

SYSTEMS

SOLD

HALCO

Software Systems

Vancouver, Canada • Tel: 1 604 731 9311


Replacement Option for

ControlLogix Motion Modules

SAWLINES

Battle Ground, Washington

— All three of the

Rockwell Automation

ControlLogix analog motion

modules, 1756-HYD02,

1756-M02AS, and 1756-M02AE,

have reached end-of-life and,

as of December 2024, will be

discontinued and no longer

available for sale. Rockwell

does not have a replacement

option, which leaves a need for

a motion solution that Delta

Motion is uniquely positioned

to fulfill. Rockwell Automation

recommends that OEMs and

system integrators consider

RMC Motion Controllers

as a replacement for these

modules.

Delta’s RMC Motion

Controllers can duplicate the

function of the discontinued

motion modules. They have the

same I/O signals, communicate

efficiently with Allen-Bradley

PLCs via EtherNet/IP, and

connect to all of the same field

devices as the ControlLogix

analog motion modules. Delta

Motion’s sales and support

team also has the expertise

to support customers in

converting from these modules

to RMC motion controllers.

Features of Delta Motion’s

RMC Motion Controllers

include:

• ±10V outputs (some RMCs

also have ±20mA and

4-20mA options)

• Connection to feedback

devices: Quadrature, SSI,

PWM, Start/Stop (analog

options are also available)

• Single and multi-axis: RMCs

are available from 1 to 50

axes for tightly synchronizing

axes

• Command-based

programming keeps most

control in the PLC, or the

RMC User Programs can

offload critical motionrelated

tasks from the PLC

• Easy-to-use and powerful

RMCTools software (freely

downloadable)

• Analog and load cell inputs

for position, pressure or

force feedback

• Extensive control algorithm

options, including dualloop

position-pressure or

position-force control

• Knowledgeable and

responsive technical support

24/7/365

To help get the word

out about this replacement

option, Rockwell Automation

welcomed Delta Motion

as a Technology Partner in

the Rockwell Automation

PartnerNetwork and

arranged for a booth at the

Automation Fair in Boston in

November.

Additionally, Delta

continues to develop and

release information designed

to make a smooth transition

for all applications. With

the announcement, Delta

has released a complete set

of details of using the RMC

with an Allen-Bradley PLC,

step-by-step instructions,

and a video on setting up the

communications between

ControlLogix and the RMCs.

For more information

regarding the transition

from ControlLogix to the

RMC, please contact Delta

Motion’s technical support at

technicalsales@deltamotion.com

or call +1 360-254-8688.

Delta Motion and Rockwell

Automation already share

many customers. Rockwell

Automation, as a leading global

automation company, has a

large installed base of its Allen-

Bradley Logix platform. Delta’s

RMC industrial hydraulic

motion controllers are used

extensively in conjunction with

these PLCs, providing easy

integration including exporting

of tag names for import into

Allen-Bradley PLCs.

Now, as a Technology

Partner, Delta looks forward to

working with more Rockwell

Automation customers to

achieve the best in industrial

motion control.

September 25-27, 2024

PORTLAND, OREGON

COME VISIT US AT

BOOTH 841


40+ YEARS

MAKING THE GRADE

EXPERIENCE. INNOVATION. EXCELLENCE.

EXPLORE

visit www.lmi3D.com/wood-ifi24

SAWLINES

Keitele Timber Oy invests

more than EUR 40 million

Keitele Group, one

of Finland’s largest

mechanical wood

processing companies,

has announced that

it was investing more

than EUR 40 million to

increase annual sawn

timber capacity at its

sawmill in Keitele,

Finland reports FEA.

With the expansion,

the Keitele Timber

Oy sawmill will be

capable of producing 600,000

cubic meters of finished sawn

timber. The investment is

planned for 2025–26.

According to the press

release, the investment will

increase net sales by EUR

60 million, while production

at Keitele will increase by

almost 50%. The investment

includes a new packaging

plant, additional drying

capacity, a processing

warehouse and batten load

handling equipment, as well

as 6 hectares of land and new

storage buildings for end

products.

The use of logs at Keitele

will increase to almost 1.3

million cubic meters per year.

The majority of the increasing

use of wood is spruce logs,

which are procured not only

from North Savo but also from

nearby regions.

The Finnish timber market,

which has become skewed as

a result of the end of Russian

pulpwood imports and the

increased energy use of wood,

will be balanced thanks to the

increased use of logs. This

creates a market for longcycle

raw material, which is

processed into sawn timber

and wood products to store

carbon.

Keitele Timber Oy’s total

sawn timber production

capacity will increase to 1.25

million cubic meters of finished

sawn timber. The company’s

other production facilities

are located in Alajärvi, South

Ostrobothnia and Kemijärvi

in Lapland. The three modern

plants use a total of nearly

2.7 million cubic meters of

high-quality Finnish conifer

logs per year, and the wood

procurement of Keitele

Forest Oy, the Group’s parent

company, covers more than

60% of the need.

BID Group Honored as OEM Partner of the Year

BID Group, a pioneer in wood

processing solutions, has

announced that it has been

bestowed with a distinguished

award as OEM Partner of

the Year from Rockwell

Automation.

The award, presented

during The PartnerNetwork

Conference, hosted by

Rockwell Automation,

recognizes BID Group’s

outstanding commitment to

ensuring customer success.

Rockwell Automation, a global

leader in industrial automation

and digital transformation,

uses its PartnerNetwork

Awards to commend

organizations that exhibit

exceptional performance in

implementing transformative

solutions, thereby fostering

collaboration and innovation

within the industry.

“We are deeply honored

to receive this award from

Rockwell Automation,” said

Simon Potvin, President of

Wood Processing at BID

Group. “Our relationship with

Rockwell has transformed

from a provider to a partner

status, enabling us to deliver

unmatched support and

solutions for our customers.

Through this collaborative

journey, we’ve identified

and implemented innovative

solutions specifically tailored

to address the demands of the

wood processing industry.”

The award highlights

BID Group’s ongoing efforts

to leverage advanced

technologies, including

artificial intelligence and digital

automation, to revolutionize

wood processing workflows

and optimize production

efficiency. By partnering

with industry leaders like

Rockwell Automation, BID

Group continues to push the

boundaries of what’s possible,

delivering unparalleled value

to its customers and driving

positive change in the wood

processing industry.

“We extend our heartfelt

gratitude to Rockwell

Automation for this honor, to

our dedicated team whose

hard work has made this

achievement possible, and, of

course, to our highly valued

customers, regarded not only

as clients but also as partners,”

commented Simon Potvin.

Simon Potvin, President

of Wood Processing at

BID Group


JS-50

X6B

CARRIAGES &

SHORT-INFEED

EDGERS

JS-50

WX

TRIMMERS

EDGERS &

MORE

JS-50

Z8

END-DOGGER,

C FRAME &

HI SPEED SNAPSHOT


SAWLINES

Kalesnikoff has

announced it will

construct a third location

this year. While the exact

location of the new facility

won’t be announced

for a few more weeks, a

Kalesnikoff recent press

release says it will be

located near the existing

mill and mass timber

facility in the Nelson-

Castlegar corridor.

Kalesnikoff announces

third new $34 million Mass

Timber Facility in West

Kootenays, Britsh Columbia

The building itself will be

constructed in part using

Kalesnikoff’s own mass

timber components. Groundbreaking

is anticipated soon

with a targeted opening by the

end of 2024.

Once complete, the new

facility will create up to 90 new

jobs. The company says the

new offerings will complement

existing Kalesnikoff products

and will be used for walls,

flooring and full modular

construction mass timber

projects.

“We have experienced

consistently strong interest

and demand in our initial mass

timber investment announced

almost exactly five years

ago,” Chris Kalesnikoff, chief

operating officer of Kalesnikoff

Mass Timber, said in a release.

“This additional offering of

leading mass timber products

and services for the North

American construction industry

will support mass timber

buildings including student

and workforce housing,

prefabricated housing and

other mass timber projects.”

In 2019, Kalesnikoff

expanded into the mass timber

market with a $35-million

manufacturing facility in South

Slocan that produces prefabricated

engineered building

products in the form of gluedlaminated

beams and crosslaminated

timber. On opening,

it created 60 new jobs, but now

employs 160.

Products and services at

the new facility will include

modular construction,

prefabricated mass timber

and light frame components,

Chris Kalesnikoff, CEO,

Kalesnikoff Mass Timber

and custom installation-ready

products to meet customers’

needs. It will also increase

Kalensnikoff’s glue laminated

timber capacity.

KWF Tagung Schwarzenborn

19th – 22nd June


WOOD DRYING

TECHNOLOGY

The HCK continuous

kiln dryer is Brunner-

Hildebrand´s answer to

the increasing demand

for continuous kiln

drying technology,

especially in the

expanding marketplace

of the softwood industry.

The HCK operates in

unidirectional mode with

lumber package motion

through the kiln in

longitudinal orientation.

This comes as a big

advantage in terms of

mill workflow with a clear

distinction between wet

side and dry side. Forklift

transport is reduced to a

minimum, no mingling

of wet and dry lumber

storage any more!

Brunner-Hildebrand HCK –

the future of Continuous

Kiln Drying!

Brunner-Hildebrand´s HCK

is divided in length into

several drying zones.

The number and size of these

drying zones are designed

according to the customers´s

desired KD output. The kilns

are rail-loaded and may

operate on a single rail or with

up to six rails depending on

customer specs. Roofings may

be added in front of the HCK

and behind to shelter lumber

from rain and snow.

With some degree of

simplification, the HCK dryer

may be regarded as a number

of batch kilns placed next

to each other with lumber

flow breaching through the

side walls of the individual

chambers. Each drying zone

is tightly controlled in terms

of temperature, air speed and

relative humidity – all of these

parameters adapted to the

actual level of lumber moisture

content.

Air speed generated

by heavy-duty axial fans

is controlled by VFCs with

periodical reversal of flow

direction. This eliminates

wet spots and results in

homogenous final moisture

content of the lumber load.

Brunner-Hildebrand´s HTT

(Hildebrand Turbo Technology)

system raises airspeed to

the maximum without the

necessity of installing overly

large fans with high power

consumption. HTT consists of

aluminum baffles which are

periodically moved in vertical

direction, thus shutting certain

sections of the lumber stacks

off from the air flow. This

increases air velocity in the

sections that are still exposed

to the air flow while air speed

is reduced to almost zero in the

baffled sections. This brings

about a recurring conditioning

effect which results in

minimized spread of final mc

distribution.

Kiln carts are moved

through the HCK by powerful

hydraulic pusher units inserted

into the concrete foundation

at the kiln entrance. Hydraulic

power is sized for pushing

the entire lumber load

forward throughout the kiln.

Indexing of the kiln carts is

performed in full automatic

mode, with surveillance

by a comprehensive set of

photoelectric sensors and end

switches.

As an integral part of the

kiln carts, Brunner-Hildebrand

installs their revolutionay

HWPT (short for „Hildebrand

Weight Precision Technology“)

system. With these wireless

weight measuring bars,

customers are capable of

measuring the weight of the

entire lumber stack resting

on top of the kiln cart and

record the weight and moisture

loss over time. The benefit

is a much tighter mc control

with hundreds of boards or

more determining the current

average mc.

With a multi-rail HCK, the

customer is even given the

opportunity of drying several

lumber dimensions in one

continuous kiln by simply

running different throughput

rates for each track. With

Brunner-Hildebrand´s special

feature, the Kiln Prime Zone

(KPZ), this even works for

lumber dimensions with

differing final target mc.

With Brunner-Hildebrand´s

game-changing GreenKilns

technology, the individual

drying zones of the HCK cooperate

in a thermal compound

system. Excess heat from one

drying zone will be extracted

and guided to another drying

zone which is in actual demand

of additional heat. This way, up

to 25% of thermal consumption

may be saved and reused for

lumber drying in an ecofriendly

way.

In 2024, PATA - the leading

forest management, lumber

production, logistics and trade

company in Latvia – finished

commissioning the last of four

Hildebrand HCK continuous

kilns for their greenfield project

at Jekabpils, about 85 miles

southeast of the capital city

Riga. All of these kilns feature

GreenKilns, HTT, HWPT and

individual zone control as

described above. Customer

feedback has been highly

positive with kiln capacity

exceeding sawline output

considerably and lumber grade

exactly at the desired level.

For more information on

Hildebrand Continuous Kilns

and various other types of kiln

dryers, please contact andreas.

mueller@brunner-hildebrand.

com or visit www.brunnerhildebrand.com.


SAWLINES

Virginia Carolina

Forest Products in

Lawrenceville, VA,

is using just one

USNR lineal grader

to grade both a pine

and a mixed rough

hardwood lumber line

in a new, more efficient

application design.

Virginia Carolina Forest Products uses USNR’s

lineal grader for hardwood and softwood lines

The production lines run

parallel to one another

and the scan frame is

placed on a rail system that

intersects both. At the flip of

a switch, the scan frame can

easily move between the more

heavily used planer line and

the hardwood line. As each

board reaches the landing

table, an overhead board

tracker projects the grade onto

each board to be screened by a

quality control technician.

This quick-switch setup

will allow both lines to receive

faster, more accurate grading

for increased value.

USNR is grateful for the

opportunity to apply this new

technology to the production

lines at Virginia Carolina Forest

Products.

USNR improves kiln

efficiency at Toney Lumber

USNR recently

implemented several

upgrades to the batch

kiln at Toney Lumber in

Louisburg, North Carolina. This

project included reskinning the

kiln, replacing the doors, and

upgrading to more efficient

materials. The all-aluminum

door panels and skins with

wrap-around style corners

minimize leaks, improving

drying times and providing

better structural integrity to

produce top-quality lumber

products.

USNR works closely with

Toney Lumber in Louisburg on

these essential maintenance

and upgrade projects.

Visit their web page or

contact a USNR representative

to learn more about the

complete lineup of lumber

drying technology.

Kiwi Lumber receives new MillExpert Log Sorter

In Masterton, New Zealand,

Kiwi Lumber is streamlining

their operation with a new

MillExpert Log Sorter system

to identify badly shaped or

oversized logs for removal prior

to entering the sawmill log

breakdown line.

Comprised of four Bioluma

3900L sensors and USNR’s

MillExpert software, this log

sorter system immediately

improves throughput by

keeping logs flowing steadily

into the sawmill while also

helping prevent log jams.

USNR is proud to be part

of this project to improve Kiwi

Lumber’s operation.

BioLuma

3900L Lineal

Sensor


WOOD DRYING

TECHNOLOGY

In 2019 Pleasant River

became the first North

American company

to invest in Valutec’s

drying technology

“They are the best kilns

out there!”, said Chris

Brochu, co-president of

Pleasant River sawmill

group, when he,

together with his brother

Jason Brochu, received

the prize as Timber

Processing’s sawmilling

person of the year 2023.

In 2019 Pleasant River

became the first North

American company to

invest in Valutec’s

drying technology.

Valutec:

“The best kilns out there!”

Since then they’ve

invested in another three

Valutec TC continuous

kilns. Other notable North

American companies that have

invested in Valutec kilns are JD

Irving, Hampton Lumber and

Spruce Products.

As the leading developer

and world leader in continuous

kilns Valutec has delivered

more than 1 500 continuous

kilns to sawmills around the

world. The latest development

is the “TC continuous kiln”.

A sustainable state-of-theart

kiln that combines high

capacity and flexibility with

excellent quality and low

energy consumption.

Built to Last

very energy efficient. Studies

shows that Valutec’s stainless

steel TC continuous kiln emits

23 tons less CO2 per year

than the correspondent kiln

built in aluminum. 23 tons of

CO2 is about as much as three

hectares of coniferous forest

absorbs in a year.

The TC Kiln

Valutec is the only company

offering TC kilns. A kiln type

that comes with distinguishing

features such as low energy

consumption, high flexibility

and superior capacity. It gives

the operator the possibility

to create the ultimate drying

process with freedom to mix

dimensions, minimal moisture

content variation and reduced

risk of checking. Annual

capacity can reach 150 MMBF

with target moisture contents

down to around 12-18% with a

standard deviation of 1%. The

principle is based on the timber

package being fed length-wise

through zones in which the air

circulates laterally across the

drying channel. This enables

the separate regulation of

the climate in different zones

according to a schedule that

comes very close to the ideal

schedule of a batch kiln.

“The leap in technology

has fundamentally changed

the way of working at many

sawmills. Higher flexibility

creates significant advantages,

Valutec kilns are probably the

market’s most sustainable

timber kilns. Constructed

in stainless steel, resistant

to thermal expansion and

fatigue, the kilns have superior

longevity (minimum 40 years),

require no reskinning and

minimal maintenance. The kilns

are equipped with efficient

IE5 fan motors,heat recovery

systems and many energysaving

functions in their control

system which make the kilns

Valutec’s kilns are constructed in stainless steel, giving them a

superior longevity and minimal maintenance requirement.


Since the beginning of 2023

Robert Weithofer is Valutec’s

North American sales

representative

particularly when it comes

to planning. Competition is

extremely tough in the sawmill

business, where margins are

tight. So, customers in this

sector rely on high efficiency

and quality,” says Robert

Larsson, Managing Director,

Valutec.

Valmatics 4.0

Valutec’s control system

Valmatics 4.0 allows sawmills

around the world to automate

and optimise drying in all

types of lumber kilns. High

process quality is guaranteed

by simulators programmed

with data from hundreds of

thousands of measurements

that enable the calculation

of drying processes with

unbeatable accuracy from

beginning to end. Valmatics 4.0

means modern TC continuous

kiln functions can be put to

full use. All the kiln operator

needs to know is the incoming

and desired outcoming

moisturecontent – the system

does the rest.

ValuSim, the calculation

program for moisture content

in Valutec’s control system

“Valmatics 4.0” is based on a

physical model for the diffusion

of water from a wooden

surface. The calculation model

has been refined over many

years and can today calculate

moisture ratio with approx.

1% accuracy. As input data,

temperatures measured for the

current drying batch are used

as well as information about

the properties of the dryer

together with the dimensions

of the wood, wood species,

etc. ValuSim is fully integrated

into Valmatics 4.0 and can be

used for both calculation of

the current moisture content

and to generate drying

schedules. Valmatics 4.0 is

the only control system on

the market that combines

simulator technology with

adaptive control, and enables

optimization based on

capacity, quality and energy

consumption. Simultaneous.

Customer Feedback

“It’s a faster and better way

to dry lumber”, Jason Brochu

co-president of Pleasant River

sawmill group.

The TC kiln has reduced our

energy consumption with

more that 30%, states Mario

Desjardins, General Manager,

J.D. Irwing, CA.

“VIDA strives to have the latest

technology at all times. It will

be very interesting to evaluate

how much the TC kiln can help

us streamline our production,”

says Jonas Axelsson, Technical

Director, VIDA GROUP, SWE.

“We want to increase the

drying capacity at our sawmills

in Preding and Sachsenburg

and saw that TC kilns were

right for us. They offer a

combination of high capacity

and flexibility, without

compromising on quality,”

says Michael Fercher, CTO at

HASSLACHER Group, AUT.

The TC kiln does a great job, in

a lot less time than we’re used

to and puts out a much better

product”, says Fred Haigis,

Lumber Yard Supervisor Moose

River, US.

Ponsse Scorpion King

Processor

Pleasant River Lumber

Pleasant River Lumber owns

and operates 2 lumber

manufacturing facilities,

multiple log purchasing yards,

two saw filing shops, and a

trucking company spread out

across the State of Maine. They

operate two SPF Spruce/Fir

framing lumber mills.

The SPF Mills current

capacity is 300 million board

feet annually. The SPF product

line consists of 2×3 through

2×10 dimension lumber and

1×3 through 1×6 boards 6’ to

16’ long.

The company has invested

heavily in modern sawmill,

drying, and planing technology

to ensure maximum yield and

consistent quality.

Chris Brochu, Co-President,


They ship their products

in the Eastern US, using rail,

flatbed trucks, containers, and

dry vans. PRL prides itself on

providing high-quality products

and long-term consistent

business relationships.

A&A Brochu Logging

Operations (Pleasant River

Lumber)

They are a cut-to-length

operation using a Ponsse

Scorpion King Processor and a

new Ponsse Buffalo Forwarder

that are running 2 shifts

currently cutting 10 t/l’s of

spruce per shift for their Enfield

mill. They thin around 20 acres

a week per shift.

Jason Brochu, Co-President,


Ponsse Buffalo Forwarder

FORWARDERS


Ponsse Forwarder Range

Agility, power,

ergonomics, weight

distribution and

economic efficiency – these are

the features that set PONSSE

forwarders apart. You can

choose from various models

suitable for soft terrain and

steep slopes alike. Power

and some the best comfort

features in forests are standard

equipment.

All PONSSE forwarder

models have more than

enough power for changing

conditions and difficult terrain

types. The excellent weight

to load-carrying ratio, the

smallest turning radius in their

size classes and dimensions

that distribute loads evenly

to all wheels are prominent

features. The extreme tractive

force of their forwarders

This forwarder has what it takes to ensure

productive operations even in the most

demanding logging sites.

LOAD CARRYING CAPACITY

25 000 kg (55,116 lbs)

POWER

210 kW (286 hp) EU and North America

220 kW (299 hp) other countries

TRACTIVE FORCE

320 kN (71,938 lbf)

LOADER

K121 M/S

LOAD SPACE CROSS-SECTION

6.8 m² (73.2 sq ft)

VLA 8.0 m² (86.1 sq ft)

GROUND CLEARANCE

800 mm (31.5 in)

MINIMUM WEIGHT

28 500 kg (62,832 lbs)

TYPICAL WEIGHT

29 300 kg (64,595 lbs)

TIRES

28,5’’

25T

Powerful engine, never-ending tractive force

and 20-ton load-carrying capacity.


20 000 kg (44,093 lbs)

POWER



TRACTIVE FORCE

240 kN (53,954 lbf)

LOADER

K121 M/S, K111 S/M


5.8–6.7 m² (62.4–72.2 sq ft)

VLA 5.2–6.7 m² (56–72 sq ft)

GROUND CLEARANCE

800 mm (31.5 in)

MINIMUM WEIGHT

22 900 kg (50,486 lbs)

TYPICAL WEIGHT

23 700 kg (52,249 lbs)

TIRES

26,5’’

20T

38 International Forest Industries | JUNE / JULY 2024 2023

Forwarders

guarantees excellent comfort

and efficiency, particularly over

longer distances. Ponsse’s

range has some of the most

productive forwarders in the

markets, both for thinning and

regeneration felling.

Ponsse’s forwarders are the

only forest machines in the

world that use a continuously

variable transmission (CVT).

This enables higher fuel

economy and tractive force,

particularly in difficult terrain.

PONSSE forwarders, equipped

with ultimate tractive force,

guarantee efficient timber

transportation – while saving

the environment as much as

possible.

This workhorse gets the job done in

conditions which often are too challenging

for others.


18 000 kg (39,683 lbs)

POWER



TRACTIVE FORCE

220 kN (49,459 lbf)

LOADER

K121 M/S, K111 S/M


5.8–6.25 m² (62.4–67.3 sq ft)

VLA 5.2–6.7 m² (56–72 sq ft)

GROUND CLEARANCE

800 mm (31.5 in)

MINIMUM WEIGHT

22 000 kg (48,502 lbs)

TYPICAL WEIGHT

22 800 kg (50,265 lbs)

TIRES

26,5’’

18T

A straightforward, yet extremely dependable

tool with well-thought-out technical systems.


18 000 kg (39,683 lbs)

POWER



TRACTIVE FORCE

210 kN (47,210 lbf)

LOADER

K100+ M/S, K101 M/S, K111 M/S


5.2–5.8 m² (56–63 sq ft)

GROUND CLEARANCE

730 mm (28.7 in)

MINIMUM WEIGHT

20 600 kg (45,415 lbs)

TYPICAL WEIGHT

21 100 kg (46,517 lbs)

TIRES

26,5’’

18T


This forwarder goes where you want it to go,

easily and effortlessly.


14 000 kg (30,865 lbs)

15 000 kg (33,069 lbs) with balanced bogies

POWER



TRACTIVE FORCE

185 kN (41,589 lbf)

An exceptionally fast forwarder that moves

slickly in all types of terrain and even over

longer distances.


16 000 kg (35,274 lbs)

POWER



TRACTIVE FORCE

210 kN (44,961 lbf)

LOADER

K90+ M/S, K100+ M/S, K101 M/S,

K111 M/S


4.5–5.5 m² (48.4–59.2 sq ft)

VLA 4.5–6.0 m² (48.4-64.6 sq ft)

GROUND CLEARANCE

680 mm (26.8 in)

MINIMUM WEIGHT

18 600 kg (41,005 lbs)

TYPICAL WEIGHT

19 800 kg (43,651 lbs)

TIRES

26,5’’

14T-

15T

LOADER

K101 M/S, K111 M/S


4.5–5.5 m² (48.4–59.2 sq ft)

VLA 4.5–6.0 m² (48.4-64.6 sq ft)

GROUND CLEARANCE

680 mm (26.8 in)

MINIMUM WEIGHT

22 000 kg (48,500 lbs)

TYPICAL WEIGHT

22 600 kg (49,824 lbs)

TIRES

26,5’’

16T


A powerful and durable forwarder with a

first-rate load-carrying capacity.


13 000 kg (28,660 lbs)

POWER



TRACTIVE FORCE

175 kN (39,341 lbf)

LOADER

K70+ M, K90+ M/S

An agile, lightweight forwarder with excellent

power, visibility, and load-carrying capacity.


12 000 kg (26,455 lbs)

POWER



TRACTIVE FORCE

165 kN (37,093 lbf)

LOADER

K70+ M


4.5–5.0 m² (48.4–53.8 sq ft)

VLA 4.5–6.0 m² (48.4–64.6 sq ft)

GROUND CLEARANCE

670 mm (26.38 in)

MINIMUM WEIGHT

17 700 kg (39,022 lbs)

TYPICAL WEIGHT

18 800 kg (41,447 lbs)

TIRES

26,5’’

13T


4.0–4.5 m² (43.1–48.4 sq ft)

GROUND CLEARANCE

645 mm (25.4 in)

MINIMUM WEIGHT

16 300 kg (35,935 lbs)

TYPICAL WEIGHT

17 300 kg (38,140 lbs)

TIRES

26,5’’

12T


Rottne F20E

Rottne E-series Forwarders

When you step into

the cab, you as a

driver is greeted by

a workplace that

leaves nothing to

chance

High ceiling, a spacious

airy feel, smart storage.

Even a built-in food

heater with timer function. A

generous storage compartment

that runs along the entire

windscreen, part of the space

is cooled by the machine’s air

conditioning system. Perfect

for storing your packed lunch.

Large windows that give you

a fantastic view around the

machine. The air conditioning

system with its automatic

temperature control and

efficient air filtration that also

purifies the recirculating air

ensures a workplace where you

can be efficient throughout the

shift. Even during the coldest

and warmest days of the year.

With main power activation via

the door switch, the system

starts up automatically and the

operator starts safely at the

touch of a button after entering

their personal start code on

the lever palette. The clean

surfaces of the cab and few

buttons in the side panels give

a neat and modern impression.

All the important functions that

are used continuously during

the work shift are close at hand

in the newly developed lever

palettes, all to make everyday

life easier for the driver. Color

displays in the lever palettes

provide the operator with the

most important information,

but also support for getting

started with the machine for

e.g. an inexperienced trailer

operator who does not drive

the machine on a daily basis.

The phone is easily connected

to the machine’s sound system

with ‘Bluetooth’ and placed in

the phone dock with built-in

antenna amplification. The

generous indoor lighting with

a LED strip in the ceiling and at

the floor both front and back

makes it easy to take care of

administrative tasks even in the

dark hours of the day. When

driving, the interior lighting

switches to a color of your

choice that provides a pleasant

light when driving in the dark.

Comfort Line

Rottne as a manufacturer

values operator comfort highly.

It is the operator who allows

the machine’s performance to

be fully utilized, and therefore

it is important that the

operator has good conditions.

Part of this work is our cab

suspension, Comfort Line. It

has become even better. After

many years of experience with

cab suspension, we have taken

it to a new level. The entire

structure has been given a lift

and become even more robust

than before. Weak points have

been improved, all to improve

operational reliability. Better

hose routing, newly designed

cylinders with high-quality

bearings and sealing systems

designed for the tough task.

The suspension has been

given a new hydraulic solution

with adjustable damping for

different terrain conditions.

With a simple push of a button,

the driver can choose between


Forwarders

three different damping levels

that can also be adjusted

to each individual’s wishes.

Informative menu for sensor

calibration and possible

troubleshooting.

Transmission

On our largest forwarder

models, the F18/F20E, we have

a robust drive with substantial

traction. Fully automatic

three-speed gearbox with

two hydrostatically driven

motors delivering up to 27

kN. The machine’s software

handles speed control and

shifting using the operator’s

instructions and an active

load control that gives the

machine efficient propulsion

both with and without a

load. The operator can easily

adjust to the right speed

using a potentiometer on

the lever palette along with

ergonomically designed, highresolution

accelerator pedals.

For long forwarding distances

or moving to the next object, a

cruise control is available.

For the smaller forwarders,

we use a transmission control

from Rexroth. This gives us

a safe and fast control of the

transmission.

On our intermediate

forwarder, XTF (Extra Traction

Force) is now available as an

option. It provides 12% better

traction for the really tough offroad

conditions. A good option

together with a balanced bogie.

All forwarders use a traction

limiter that is managed by the

software in the machine. This

gives the machine a better

behavior if the terrain requires

maximum traction to perform

the work.

Loaders

All Rottne’s forwarder models

have self-designed cranes. If,

on the other hand, you choose

a longer range, we have a good

collaboration with Epsilon.

The performance of the cranes

is well balanced with the size

of the machine and hydraulic

system. RCA (Rottne Crane

Assistance) is available as an

option on most variants. The

system helps the operator to

efficiently operate the crane

throughout the shift.

With the E-model, we want

to give you as a user a high

level of comfort during many

work shifts.

The air conditioning system with its automatic temperature

control and efficient air filtration that also purifies the

recirculating air ensures a workplace where you can be efficient

throughout the shift.

BL/EX LINE: BITE LIMITER TECHNOLOGY

FOR LIMITLESS PRODUCTIVITY.

Achieve new levels of productivity with the BL0, BL1, BL2, BL3, BL4 and the BL5/EX forestry mulchers for

excavators from 2 to 36 tons. The innovative Bite Limiter technology reduces power demand and promotes

a consistent working speed, guaranteeing excellent performance when mulching any type of wood.

Contact us to find the right FAE product for you: info@fae-group.com

fae-group.com


A 25-tonne 1085C

forwarder working in

Quebec, Canada.

Tigercat Forwarders

The 1055C is a heavy duty

14-tonne forwarder built

to handle both selective

harvesting and final

felling applications. In

order to meet the needs

of a global market, the

1055C has two bogie

choices, two transmission

choices, two sizes of

With a 20-tonne

capacity, the 1075C

is designed for

long distance forwarding,

tough terrain and scarifying

applications. The two Tigercat

hooked crane choices are the

F165T85 and the F195T85. With

optional extreme duty Tigercatbuilt

bogies, the 1075C excels

in tough terrain and slopes

and operates with minimal

soil disturbance due to the

extra-long 1,89 m (74 in) bogie

walking beams. An optional

two-speed transmission is

perfect for long forwarding and

moderate terrain.

The 1085C has a massive

25-tonne capacity. It excels

in severe duty, steep slope

applications. An optional steep

slope package includes a 25°

rearward tilting crane, a moving

reinforced gate, 21 tonne (23

US ton) rear frame tethering

lugs, and an optimized steep

slope bunk design. A baffle

system in the fuel tank ensures

a constant supply on steep

ground. The front bogie pinion

and transmission are pressure

lubricated. The Tigercat-built

drivetrain provides torque

that is unmatched in the

industry. Tigercat’s WideRange

transmission provides plenty

of tractive effort to carry large

loads on steep slopes and

achieves a maximum working

speed of 7 km/hr with a single

gear ratio. The 1085C can

attack and manoeuvre steep

slopes under load with ease.

level-load bunk systems,

and three wagon frame

lengths. Crane choices

include the standard

Mesera M92FT100, and

the Tigercat F135T85

hooked crane. Both are

available with various

grapple options.

A 20-tonne 1075C forwarder equipped with low-wide working in Sweden. The hooked

crane, low gate and angled bunk system enhance productivity in addition to making it

easier for the operator to see the load.


Hooked crane profile and lowwide

bunks

Tigercat cranes are capable of

heavy loads and tough duty

cycles. The slew base has a

tapered roller bearing system

designed to last the life of the

machine, and no plain slew

bearings or spherical rollers

often used in other cranes.

The crane’s hooked profile

is designed to increase the

working envelope of the crane

for reduced machine travel

and improved productivity. But

where the crane really shines

is when used in combination

with Tigercat’s new low-wide

expandable bunk systems.

In addition to a conventional

flat loading expandable

bunk system, Tigercat has

optional low-wide® bunks,

which are inclined rearward

to reduce overall gate height

and eliminate the need for

a vertically sliding gate.

In combination with the

hooked crane, the low-wide

bunk system significantly

reduces the chance of crane

contact with the gate or bunk

stakes. Operator visibility

and productivity is enhanced.

The operator enjoys a clear

sightline to the top of the

load, increasing log placement

accuracy and decreasing cycle

times. In addition, the grapple

stays within the operator’s view

through the entire loading and

unloading cycle for reduced

operator strain.

The low-wide system is

available for both the 1075C

and 1085C forwarders.

Operator’s Station

Crane control is very smooth

and predictable with optimized

flow sharing features so

A 14-tonne 1055C forwarder on a thinning operation in Sweden.

crane movements are precise

over a variety of loads and

conditions. Tigercat forwarders

are equipped with a modern,

spacious and comfortable cab.

Extended windows provide

excellent visibility to the

load area and the ground.

Operators comment about

an open feeling even after a

long shift in the cab. A rear

window guard provides more

protection and comes standard

on all forwarder cabs. A quiet

environment is important

for operator comfort and

productivity. The forwarder

cab is insulated and isolationmounted

for reduced noise and

vibration levels. A variety of

operator convenience options

is available. Each machine

comes with a TPMS system for

maximum tire life. LogOnTM

comes standard on Tigercat

forwarders and RemoteLog®

telematics is optional, along

with a data package paired to

the warranty period purchased

with the machine.

Tigercat F30 Productivity

Monitoring System

Tigercat forwarders the levelload

bunk system are available

with an optional payload

scale system. Payload data is

conveniently displayed in the

cab, including a load counter

and a tare weight reset button.

Payload scales can also be

integrated with the optional

F30 productivity system. Actual

load weight can be added

to data uploaded from the

harvester to make it easier to

track productivity, maximize

production, and provide load

information for the mill. The

F30 productivity system can

also generate StanForD classic

or 2010 reports from the data

Service

Tigercat forwarders have

unsurpassed service access

to all electrical, mechanical

and hydraulic systems. Access

to the engine, driveline, and

pumps is through the tilt-out

hood enclosure and tilting

cab. Hydraulic valves and

computer control modules are

located in one compartment

in the wagon frame. Easily

accessed from ground level,

hydraulic adjustments are

simple to perform. Hydraulic

cleanliness is easy to maintain

with spin-on hydraulic filters

and an electric oil-filling pump.

Electrical reliability is excellent

due to short wire runs between

the control modules and valves

located immediately beside

them.

Alstor 840 PRO - Combi

The Alstor 834 has a

completely new front

chassis where the

removable belly plate creates

very good serviceability.

Operator ergonomics have

been optimised with reduced

cab noise levels and increased

storage. The traction is greatly

improved with a 24 hp Yanmar

engine. The new clutch

provides better control and

power in difficult and advanced

Cont’d from Page 48


Mulching Heads

4061 and 4054

Tigercat Mulching

Heads are an End To End

management solution.

They are well matched

to the high performance

and capabilities of

Tigercat Mulchers

including the

M726G, 760B,

470 and

480B models.

The 4061 and 4054 mulching

heads are manufactured

to Tigercat’s exacting high

standards for robustness and

quality. The 4061-30 is a 3

metre (118 in) wide mulching

head that can be used on the

480B and 760B mulchers. The

4061-25 is a 2,5 metre (98 in)

wide head, best suited to the

480B and M726G mulchers.

The 4054-20 is a 2 metre (79

in) wide head best suited to the

470 mulcher.

The housing features

reinforced side covers and

abrasion resistant skis. The

housing is optimized with

debris door cylinders mounted

internally for protection and

contains position references

to aid in ski alignment. Poly

chain eliminates belt slip

and provides efficient power

transfer to the rotor, lowering

maintenance time and costs

associated with conventional

v-belts.

Regular maintenance is a

snap, maximizing uptime. Large

removable side panels give

The 4161-15 mulching head, when paired with the LX830E is

a highly capable steep slope mulcher

access to the drive belts and

sprockets. Many removable

panels on the head provide

excellent access to all service

points. Features such as bolt-in

wear liner and reversible anvils

all help to increase overall

uptime.

4161-15 swing to tree

mulching head

The newest addition to the

Tigercat mulching head line is

the 4161 swing to tree mulching

head. The 4161-15 is a 1,5 metre

(59 in) heavy-duty swing to tree

mulching head is optimized

for use on Tigercat 800 series

carriers.

The 4161-15 uses many field

proven components common to

other Tigercat mulching heads.

There is a choice of standard

drum rotor or feed control

rotor with depth gauges in

front of each tooth to control

the cutting depth, reducing

load on the machine. The rotor

design is similar to 4061 series

mulching heads. Tool choices

include standard carbide,

heavy-duty rock resistant

carbide, and hardened steel

knife style.

The 4161-15 pivots 130°

(+/- 65°) left or right on a

hydraulically controlled wrist.

Hydraulic hoses to the head are

routed through the open boom

tip of the carrier and connected

to a manifold in the wrist. This

routing minimizes exposed

hoses, aiding in reducing wear

and damage.

When paired with the

Tigercat LX830E, this minimal

tail swing, leveling machine

is highly effective at fuel

load management and fire

mitigation on steep slopes and

tight areas.

The powerful Tigercat 760B with 4061-30 mulching head doing post-harvest

silviculture preparation in South Africa


New BL1/EX-75 forestry

mulcher with no motor

draining required

The FAE BL1/EX range expands with a new model

that eliminates the need for motor draining. The new

model for 4.5-to-7.5-ton excavators, features a newly

conceived gear motor, with easier and more costeffective

installation.

The BL1/EX-75 can mulch

light vegetation, shrubs,

and trees up to 12 cm

in diameter. It can be used

to control vegetation along

roadsides, railroad tracks, and

the banks of canals, rivers

and lakes, to manage and

protect wildlife habitats, and to

maintain commercial parks and

sports grounds.

The new BL1/EX-75 model

replaces the old, piston-motor

model, and is complemented

by the VT model, with the same

operating width.

The Bite Limiter technology

on this head is ideal for

high-productivity vegetation

management, with reliably

efficient shredding. The Bite

Limiter rotor uses special

wear-resistant steel profiles

to limit the reach (bite) of

the teeth. This cuts down on

power demand and promotes a

consistent working speed, for

excellent performance when

mulching any kind of wood. The

Bite Limiter technology also

minimizes rotor stalling and

optimizes fuel consumption.

The new BL1/EX-75 can be

equipped with BL/MINI blades

or C/3/MINI teeth and is

available in an operating width.

New FAE BL2/S/EX forestry

mulcher for 11–16 ton

excavators

FAE expands its line of forestry mulchers with Bite

Limiter technology with a model designed for

mid-range excavators: the BL2/S/EX for 11–16 ton

excavators.

The BL2/S/EX can mulch

vegetation, shrubs, and

trees up to 15 cm in

diameter. It is designed for

forestry management, roadside

and railway maintenance,

maintaining the banks of

canals, rivers and lakes, and

managing and protecting

wildlife areas.

The Bite Limiter technology

on this head is ideal for

high productivity vegetation

management, with reliably

efficient shredding. The rotor

with Bite Limiter technology

comes with special wearresistant

steel profiles that

limit the reach (bite) of the

teeth. This cuts down on

power demand and promotes a

consistent working speed, for

excellent performance when

mulching any kind of wood.

Bite Limiter technology also

minimizes rotor stalling and

optimizes fuel consumption.

The sturdy steel frame is

built to last, just like all FAE

products. The toothed belt

transmission provides optimal

power transfer and long-term

reliability. Interchangeable

bolt-on Spike Pro counter

blades and skids and a

hydraulically adjustable hood

are also major design features.

The BL2/S/EX is also

available with FAE’s exclusive

Sonic system, which keeps the

operating carrier and the FAE

mulcher completely aligned

by automatically calibrating

and constantly regulating the

mulcher’s hydraulic parameters

for a significant boost in

productivity. The FAE app is

also available for technical

support and makes it possible

to quickly and easily calibrate

the Sonic system for fast and

accurate connection to the

operating carrier so you can get

the highest level of productivity

from your FAE mulcher.

The new BL2/S/EX can be

equipped with BL blades or C/3

teeth and is available with a

working width of 125.

www.fae-group.com


SALES OFFICES

UK, Europe, South Africa,

US East Coast

CONTACT: Robin Peach


Tel: +44 (0)1442 877 777

Fax: +44 (0)1442 870 617


ADVERTISERS INDEX

Combilift . . . . . . . . . . . . . . . . . . . . . . 15

www.combilift.com

Delta Motion . . . . . . . . . . . . . . . . . . .2

www.deltamotion.com

Demo International 2024 . . . . 4 & 13

www.demointernational.com

Franzen . . . . . . . . . . . . . . . . . . . . . . . 11

www.franzen-machines.com

Microtec . . . . . . . . . . . . . . . . . . . F/C & 3

www.microtec.eu

M&I Materials . . . . . . . . . . . . . . . . . . . .9

www.mimaterials.com

Mus-Max . . . . . . . . . . . . . . . . . . . . . . . 10

www.mus-max.at

Opticom . . . . . . . . . . . . . . . . . . . . . . . . 21

www.opticomtech.com

Japan

CONTACT: Shigeru Kobayashi

Japan Advertising Communications, Inc.

Star Bldg., 3-10-3 Kanda Jimbocho

Chiyoda-ku, Tokyo 101-0051

Tel: 81-3-3261-4591

Fax: 81-3-3261-6126

Email: Shig-kobi@media-jac.co.jp

Western USA (AZ, CA, NV, UT)

Australia, & New Zealand

CONTACT: Kevin Lapham

J.P.Media Inc

Tel: +1 (630) 420 9752

Fax: +1 (630) 420 9763

Email: lapham@jpmediainc.com

Western USA (MT, ID, OR,WA) & Canada


J.P.Media Inc

Tel: +1 (630) 420 9752

Fax: +1 (630) 420 9763


FAE . . . . . . . . . . . . . . . . . . . . . . . . . .43

www.fae-group.com

Global Lifting Awareness Day (GLAD) . . 14

https://globalliftingawarenessday.com/

Halco Software Systems . . . . . . . . .27

www.halcosoftware.com

Jartek . . . . . . . . . . . . . . . . . . . . . . . .25

www.jartek.fi

Joescan . . . . . . . . . . . . . . . . . . . . . . . 31

www.joescan.com

LMI Technologies . . . . . . . . . . . . . . .29

www.LMI3D.com

Logmax . . . . . . . . . . . . . . . . . . . . . . IFC

www.logmax.com

Cont’d from Page 45

Ponsse . . . . . . . . . . . . . . . . . . . . . . . . . 5

www.ponsse.com

Rawlings . . . . . . . . . . . . . . . . . . . . . . . . 6

www.rawlingsmanufacturing.com

Rottne . . . . . . . . . . . . . . . . . . . . . . . . . .33

www.rottne.com

Springer . . . . . . . . . . . . . . . . . . . . . . . . 19

www.springer-usa.com

Tigercat . . . . . . . . . . . . . . . . . . . . . . . . . 7

www.tigercat.com

Timber Processing and Energy Expo . .IBC

https://timberprocessingandenergyexpo.com

ZF Group . . . . . . . . . . . . . . . . . . OBC/17

www.zf.com

Alstor 840 PRO - Combi Machine

US Mid-West, Central & Mountain


J.P.Media Inc

1163 E.Ogden Ave, Ste. 705-359 Naperville

IL 60563, USA

Tel: +1 (630) 420 9752

Fax: +1 (630) 420 9763


terrain. The new simplified powertrain

provides better braking performance and

creates better serviceability and reliability.

The Alstor 834 now also has electrically

lockable differential gears, which provide

even better agility and accessibility and

have a smaller footprint in the forest and

land. The newly developed timber nest

has sturdier bunks and a design that

facilitates loading and unloading. The

new design also makes it easier to adapt

to Alstor’s different load concepts and

special adaptations.

KWF Tagung Schwarzenborn

19th – 22nd June


JUNE / JULY 2024


JUNE / JULY 2024


International Forest Industries Magazine (IFI) stands as a premier

forestry publication globally, delving into timber harvesting, forwarding,

haulage, and sawmill operations. From timber handling to cutting-edge

technology and logistics, IFI provides comprehensive coverage. We also

address biomass collection and processing, bridging the longstanding

gap in forest-related industries for suppliers in timber harvesting, sawmill

operations, and biomass management.

APRIL / MAY 2024


APRIL / MAY 2024

Thinning Harvesters • Chippers

SAWLINES

FAST INSTALLATION

SIMPLE OPERATION

MAXIMUM VALUE EXTRACTION

FEB / MARCH 2024


FEBRUARY / MARCH 2024

SAWLINES

Planers & Edgers

Harvesters

Lifting & Loading

DEC / JANUARY 2024

SAWMILLING • LOGGING • BIOMASS • RENEWABLE ENERGY Dec / JANUARY 2024

SAWLINES

Planers & Edgers

Biomass

Steep Slope

Harvesting

Felling Heads

CHAIN SHARPENING PROFESSIONALS

OCTOBER / NOVEMBER 2023


OCTOBER / NOVEMBER 2023

SAWLINES

Harvester

Heads

Forestry

Mulchers

Track

Carriers

AUGUST / SEPTEMBER 2023


AUGUST / SEPTEMBER 2023

SAWLINES

Skidders

Shredders

& Grinders

Scanning

& Optimisation

JUNE / JULY 2023


JUNE / JULY 2023

SAWLINES

Forwarders

Harvester

Head Launch

CVT Technology

New Harvester

APRIL / MAY 2023

LIGNA

SHOW ISSUE


APRIL / MAY 2023

SAWLINES

Chippers

Access to the

Timber Stand

Feller

Bunchers

The end of the

road is where

we get started.

Efficient, clean and safe: this is how we envision future

off-road operation with intelligent system solutions.

As a full-range supplier, we supply comprehensive drive systems for off-road

machinery from one source. We develop axles and transmissions with advanced

software functions and combine them with state-of-the-art braking technology,

connectivity and safety solutions. Our answer to meeting the industry’s challenges:

comprehensive and intelligent system solutions, thoroughly matched to each other.

In doing so, we always keep an eye on reducing emissions and remain on our path

to Vision Zero. ZF.com/construction

International Forest Industries June July 2024

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template ?