Cablecraft Issue 11 - DIN Rail Mounted Terminals & Accessories

CONNECT
Connect
6.0mm
6.0mm
6.0mm
6.0mm
DIN rail mounted terminals
and accessories
Our range of DIN Rail mounted terminals comprises of standard, double, triple
and miniature terminals. In this section you will also find a range of accessories
consisting of end stops, plates, partitions and insulation plates.
Standard feed through connector
range & accessories
SRK range 380
Protective earth terminals &
accessories
Protective earth terminals: SL range 406
DIN rail mounted terminals & accessories
12.0mm
RK range 388
144.0 x 210.0mm x 144.0 x 210.0mm x Double-deck terminal blocks &
accessories
6.0mm
RKD range 391
RKDG range 393
Protective earth terminals: SSL range 407
Fuse disconnect terminals &
accessories
Fuse disconnect terminals:
STK2 and SSIK range
409
SRKD range 394
SSLD range 400
Stud connection system
HSKG range 411
Triple-deck terminal blocks &
accessories
Other accessories
IK 2.5 – wire size 2.5mm 2 403
Terminal markers: SB5 range 414
IKD 2.5/Q – wire size 2.5mm 2 404
Terminal markers: SB6 range 414
DIN rail 415
378
11.0mm
Knife disconnect terminals
TRK 1.5 – wire size 2.5mm 2 405
DIN rail cutting tool 415
379

DIN rail mounted terminals & accessories
CONNECT
Standard feed-through connector range
Standard feed-through connector range
Cablecraft feed-through terminal blocks use the easy to operate screw connection
system. They have two connections and are suitable for top hat TS 35mm.
SRK 2.5/2A – wire cross section 2.5mm 2
Cablecraft SRK 2.5/2A
SPECIFICATIONS
Standards
features two channel
Material
IEC, UL and CSA approved,
pluggable crossconnectors
and a more rigid
SCREW
Polyamide 6.6 UL 94 - V0
RoHS 2 compliant
construction on the rail. The DIN rail type
Foot can be snapped on to TS 35 DIN rail
operating temperature is
SRK 4/2A
-40°C to +120°C. Standard Standards
IEC, UL and CSA approved,
SCREW
colour is beige, for colour
OTHER COLOURS AVAILABLE
RoHS 2 compliant
options see below.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
mm 2 /AWG
IEC
SRK 2.5/2A
SRK 4/2A (COLOUR) 1000/41 4.0/26-10 1
How to order
OTHER COLOURS AVAILABLE
144.0
x
210.0mm x
Add the colour to the end of the part no.
144.0 x 210.0mm x Part number RATED VOLTAGE/ MAX CURRENT Conductor
Pack
SRK 4/2A accessories
mm 2 /AWG
quantity
IEC
SES 35 ES 35
SRK 2.5/2A (COLOUR) 1000/32 2.5/30-12 1
380
SRK 2.5/2A accessories
SES 35 ES 35
6.0mm
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5-10 Beige 1
Partition plate TW 2.5-10 Beige 1
Two pole insulated cross connector SQI 2.5/2 Yellow 1
Three pole insulated cross connector SQI 2.5/3 Yellow 1
Four pole insulated cross connector SQI 2.5/4 Yellow 1
Ten pole insulated cross connector SQI 2.5/10 Yellow 1
Thirty pole insulated cross connector SQI 2.5/30 Yellow 1
26.0mm
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
Other colours may be available on request –
minimum order quantities apply.
6.0mm
SRK 4/2A – wire cross section 4mm 2
Cablecraft SRK 4/2A features
two channel pluggable crossconnectors
and a more rigid
construction on the rail. The
operating temperature is
-40°C to +120°C. Standard
colour is beige, for colour
options see below.
6.0mm
6.0mm
CONNECT
Standard feed-through connector range
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V0
DIN rail type
Foot can be snapped onto TS 35 DIN rail
HF
Halogen
Free
How to order
Add the colour to the end of the part no.
Pack
quantity
Other colours may be available on request –
minimum order quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5-10 Beige 1
Partition plate TW 2.5-10 Beige 1
Two pole insulated cross connector SQI 4/2 Yellow 1
Three pole insulated cross connector SQI 4/3 Yellow 1
Four pole insulated cross connector SQI 4/4 Yellow 1
Ten pole insulated cross connector SQI 4/10 Yellow 1
Thirty pole insulated cross connector SQI 4/30 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
26.0mm
381
DIN rail mounted terminals & accessories

CONNECT
CONNECT
6.0mm
Standard feed-through connector range
SRK 6/2A – wire cross section 6mm 2
6.0mm
SRK 10/2A – wire cross section 10mm 2
Standard feed-through connector range
DIN rail mounted terminals & accessories
Cablecraft SRK 6/2A features
two channel pluggable crossconnectors
and a more rigid
construction on the rail. The
operating temperature is
-40°C to +120°C. Standard
colour is beige, for colour
options see below.
SRK 6/2A
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V0
DIN rail type Foot can be snapped on
to TS 35 DIN rail
Standards IEC, UL and CSA approved,
RoHS 2 compliant
OTHER COLOURS AVAILABLE
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
How to order
Add the colour to the end of the part no.
Pack
quantity
SRK 6/2A (COLOUR) 1000/57 6.0/22-8 1
HF
Halogen
Free
6.0mm
Cablecraft SRK 10/2A features
two channel pluggable crossconnectors
and a more rigid
construction on the rail. The
operating temperature is
-40°C to +120°C. Standard
colour is beige, for colour
options see below.
SRK 10/2A
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V0
DIN rail type Foot can be snapped
on to TS 35 DIN rail
Standards
IEC, UL and CSA approved,
RoHS 2 compliant
OTHER COLOURS AVAILABLE
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
How to order
Add the colour to the end of the part no.
Pack
quantity
SRK 10/2A (COLOUR) 1000/76 10.0/18-6 1
HF
Halogen
Free
DIN rail mounted terminals & accessories
SRK 6/2A accessories
SRK 10/2A accessories
144.0 x 210.0mm 144.0 x 210.0mm x 144.0 SES 35 x 210.0mm
ES 35
Other colours may be available on request –
minimum order quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5-10 Beige 1
Partition plate TW 2.5-10 Beige 1
Two pole insulated cross connector SQI 6/2 Yellow 1
Three pole insulated cross connector SQI 6/3 Yellow 1
Four pole insulated cross connector SQI 6/4 Yellow 1
Ten pole insulated cross connector SQI 6/10 Yellow 1
Thirty pole insulated cross connector SQI 6/30 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
6.0mm
SES 35 ES 35
Other colours may be available on request –
minimum order quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5-10 Beige 1
Partition plate TW 2.5-10 Beige 1
Two pole insulated cross connector SQI 10/2 Yellow 1
Three pole insulated cross connector SQI 10/3 Yellow 1
Four pole insulated cross connector SQI 10/4 Yellow 1
Ten pole insulated cross connector SQI 10/10 Yellow 1
Thirty pole insulated cross connector SQI 10/30 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
12.0mm
382
26.0mm
26.0mm
383

DIN rail mounted terminals & accessories
CONNECT
Standard feed-through connector range
SRK 16/2A – wire cross section 16mm 2
Cablecraft SRK 16/2A is suitable for wire size 16mm 2 and features
two channel pluggable cross-connectors and a more rigid
construction on the rail. The operating temperature is -40°C to
+120°C. Standard colour is beige, for colour options see below.
SRK 16/2A
OTHER COLOURS AVAILABLE
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SRK 16/2A accessories
Accessory type Part number Pack quantity
End plate SAP 16 1
Two pole insulated cross connector SQI 16/2 1
6.0mm
SCREW
How to order Add the colour to the end of the part number.
SPECIFICATIONS
Pack
quantity
SRK 16/2A (COLOUR) 1000/101 16.0/16-4 1
The end plate is beige and the cross
connectors are yellow as standard.
Other colours are available on request –
minimum order quantities apply.
HF
Halogen
Free
Material
Polyamide 6.6 UL 94 - V0
DIN rail type Foot can be
snapped onto TS 35 DIN rail
Standards IEC, UL and CSA
approval pending,
RoHS 2 compliant
SRK 50/2A – wire cross section 50mm 2
Cablecraft SRK 50/2A is
suitable for wire size 50mm 2
and features screw crossconnectors
and a more rigid
construction on the rail. The
operating temperature is
-40°C to +120°C. Standard
colour is beige, for colour
options see below.
SRK 50/2A
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
CONNECT
Standard feed-through connector range
SPECIFICATIONS
OTHER COLOURS AVAILABLE
Material
Polyamide 6.6 UL 94 - V0
DIN rail type
Foot can be snapped onto TS 35 DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
6.0mm
SRK 50/2A accessories
SCREW
HF
Halogen
Free
How to order Add the colour to the end of the part number.
Pack
quantity
SRK 50/2A (COLOUR) 1000/192 50.0/8-0 1
DIN rail mounted terminals & accessories
SRK 35/2A – wire cross section 35mm 2
Cablecraft SRK 35/2A is suitable for wire size 35mm 2 and features
two channel pluggable cross-connectors and a more rigid
construction on the rail. The operating temperature is -40°C to
+120°C. Standard colour is beige, for colour options see below.
SCREW
HF
Halogen
Free
6.0mm
Accessory type Part number Pack quantity
Two pole cross connector SQ 50/2 1
Three pole cross connector SQ 50/3 1
Four pole cross connector SQ 50/4 1
SRK 35/2A
OTHER COLOURS AVAILABLE
How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
SRK 35/2A (COLOUR) 1000/150 35.0/16-1/0 1
384
SRK 35/2A accessories
The cross connectors are yellow as standard.
Other colours are available on request –
minimum order quantities apply.
Accessory type Part number Pack quantity
Two pole insulated cross connector SQI 35/2 1
SPECIFICATIONS
Material Polyamide 6.6 UL 4 - V0
DIN rail type Foot can be
snapped onto TS 35 DIN rail
Standards IEC approved, UL
and CSA approval pending,
RoHS 2 compliant
12.0mm
385

CONNECT
Standard feed-through connector range
12
CONNECT
Standard feed-through connector range
SRK 70/2A – wire cross section 70mm 2
13
SRK 120/2A – wire cross section 120mm 2
DIN rail mounted terminals & accessories
Cablecraft SRK 70/2A is suitable
for wire size 70mm 2 and features
screw cross-connectors and a
more rigid construction on the
rail. The operating temperature
is -40°C to +120°C. Standard
colour is beige, for colour
options see below.
SRK 70/2A
SPECIFICATIONS
OTHER COLOURS AVAILABLE
Material
Polyamide 6.6 UL 94 - V0
DIN rail type Foot can be snapped on to
TS 35 DIN rail
Standards IEC, UL and CSA approval
pending. RoHS 2 compliant
SCREW
How to order
Add the colour to the end of the part number
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
SRK 70/2A (COLOUR) 1000/232 70/6-000 1
HF
Halogen
Free
6.0mm
Cablecraft SRK 120/2A is suitable
for wire size 120mm 2 and
features screw cross-connectors
and a more rigid construction
on the rail. The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour options see below.
SRK 120/2A
OTHER COLOURS AVAILABLE
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V0
DIN rail type
Foot can be snapped on to TS 35 DIN rail
Standards IEC, UL and CSA approval
pending, RoHS 2 compliant
SCREW
How to order
Add the colour to the end of the part number
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
SRK 120/2A (COLOUR) 1000/290 120/4-0000 1
HF
Halogen
Free
DIN rail mounted terminals & accessories
SRK 70/2A accessories
144.0 x 210.0mm x SRK 120/2A accessories
144.0 x 210.0mm x Accessory type Part number Pack quantity
Accessory type Part number Pack quantity
386
Two pole cross connector SQ 70/2 1
Three pole cross connector SQ 70/3 1
Four pole cross connector SQ 70/4 1
HOW THE SRK AND SSL SCREW CONNECTION SYSTEM WORKS
a
b
c
a The Connection
The clamping yolk
transmits pressure
from the screw to
clamp the conductor
against the busbar.
The required contact
force is generated by
b Safe to wire
The screwconnection
mechanism is easy
to operate and can
be used to establish
a quick, safe connection
using solid and
c
the torque applied to
the screw.
flexible wires with
or without cord end
terminals.
Pluggable crossconnection
options
Distributing
potentials with the
pluggable SQI crossconnection
system is
quick and easy. Two
cross-connection
channels allow two
voltages to be fed
across when working
with the standard
terminals with rated
cross-sections of
2.5mm 2 , 4mm 2 ,
6mm 2 and 10mm 2 .
ÍCX,rÎ ÍCX,rÎ ÍCX,rÎ
ÍDX-vÎ ÍDX-vÎ ÍDX-vÎ
Two pole cross connector SQ 120/2 1
Three pole cross connector SQ 120/3 1
Four pole cross connector SQ 120/4 1
387

CONNECT
RK 95 – wire cross section 95mm 2
6.0mm
Standard feed-through connector range
RK 150 – wire cross section 150mm 2
6.0mm
CONNECT
Standard feed-through connector range
DIN rail mounted terminals & accessories
Cablecraft RK 95 feed through
terminal features a double-layer
insulation housing. It is suitable
for wire size 95mm 2 and fits
on to TS 35 rail. The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour options see below.
RK 95
OTHER COLOURS AVAILABLE
RK 95 accessories
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type Foot can be snapped on
to TS 35 DIN rail
Standards IEC, UL and CSA approved,
RoHS 2 compliant
How to order
Add the colour to the end of the part number
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Accessory type Part number Colour Pack quantity
SCREW
Pack
quantity
RK 95 (COLOUR) 1000/232 95/ 4/0-2 1
SES 35 ES 35
Two pole insulated cross connector AQI 2/95 Yellow 1
Three pole insulated cross connector AQI 3/95 Yellow 1
End stop – snap on SES 35 Beige 1
End stop - screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
HF
Other colours may be available on request – minimum order
quantities apply.
Halogen
Free
6.0mm
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type Foot can be snapped on
to TS 35 DIN rail
Standards IEC, UL and CSA approved,
RoHS 2 compliant
SES 35 ES 35
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
Cablecraft RK 150 feed through
terminal features a double-layer
insulation housing. It is suitable for
wire size 150mm 2 and fits on to TS
35 rail. The operating temperature
is -40°C to +120°C. Standard colour
is beige, for colour options see
below.
RK 150
OTHER COLOURS AVAILABLE
RK 150 accessories
How to order
Add the colour to the end of the part number
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Accessory type Part number Colour Pack quantity
SCREW
Pack
quantity
RK 150 (COLOUR) 1000/309 150/ 300-2 1
Two pole insulated cross connector AQI 2/150 Yellow 1
Three pole insulated cross connector AQI 3/150 Yellow 1
End stop – snap on SES 35 Beige 1
End stop - screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
HF
Other colours may be available on request – minimum order
quantities apply.
Halogen
Free
DIN rail mounted terminals & accessories
THE RK RANGE
The clamping yoke
The specialised construction of the
clamping yoke minimises the
contact resistance between the wire
and the busbar. The clamp is tightened
using a hex-socket screw which
creates the required torque together
with the clamping yoke.
Pegs
Pegs are located on the plastic
housing of the terminal blocks –
these lock to adjacent terminals to
increase the mechanical stability.
Cross connectors
The RK 50, RK 95 and RK 240 can be
connected electrically to each other
within the same rated cross section
range using 2-pole or 3-pole external
cross-connectors. The external crossconnectors
are designed to match
the rated current of the
corresponding terminal block.
12.0mm
388
389

CONNECT
6.0mm
Standard feed-through connector range
RK 240 – wire cross section 240mm 2
6.0mm
Double-deck terminals - RKD range
CONNECT
Double-deck RKD terminals
DIN rail mounted terminals & accessories
Cablecraft RK 240 feed through
terminal features a double-layer
insulation housing. It is suitable for
wire size 240mm 2 and has a unique
foot contact on both sides allowing the
terminal to be snapped on to TS 35 rail.
The operating temperature is -40°C to
+120°C. Standard colour is beige, for
colour options see below.
RK 240
OTHER COLOURS AVAILABLE
RK 240 accessories
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type Foot can be
snapped on to TS 35 DIN rail
Standards IEC, UL and CSA
approved, RoHS 2 compliant
How to order
Add the colour to the end of the part number
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Accessory type Part number Colour Pack quantity
SCREW
Pack
quantity
RK 240 (COLOUR) 1000/380 240/ 500-2/0 1
SES 35 ES 35
Other colours may be available on request – minimum order
quantities apply.
Two pole Insulated cross connector AQI 2/240 Yellow 1
Three pole insulated cross connector AQI 3/240 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
HF
Halogen
Free
6.0mm
RKD 2.5/35 – wire cross section 2.5mm 2
The RKD terminal blocks can be
cross-connected at both levels.
They have a width of 5mm and
three levels with six connection
points. They can handle solid or
stranded wires up to 2.5mm 2 .
The operating temperature is
-40°C to +120°C. Standard colour
is beige, for colour options
see below.
RKD 2.5/35
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, CSA approved, RoHS 2 compliant
OTHER COLOURS AVAILABLE
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
HF
Halogen
Free
How to order
Add the colour to the end of the part no.
Pack
quantity
RKD 2.5/35 (COLOUR) 500/24 2.5/22-14 1
RKD 2.5/35 accessories
SES 35 ES 35
Other colours may be available on request – minimum order
quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate AP 4 Beige 1
Two pole cross connector Q 2-5mm - 1
Three pole cross connector Q 3-5mm - 1
Four pole cross connector Q 4-5mm - 1
Ten pole cross connector Q 10-5mm - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
DIN rail mounted terminals & accessories
12.0mm
390
26.0mm
26.0mm
391

CONNECT
Double-deck RKD terminals
RKD 4/35 – wire cross section 4mm 2
6.0mm
RKDG 4 – wire cross section 4mm 2
6.0mm
CONNECT
Double-deck RKDG terminals
DIN rail mounted terminals & accessories
The RKD 4 terminal blocks have a
width of 6mm and are available in
a variety of designs. They have two
levels with four connection points
and can handle solid or stranded
wire up to 4mm 2 . The operating
temperature is -40°C to +120°C.
Standard colour is beige, for colour
options see below.
RKD 4/35
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, CSA approved, RoHS 2 compliant
OTHER COLOURS AVAILABLE
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
HF
Halogen
Free
How to order
Add the colour to the end of the part no.
Pack
quantity
RKD 4/35 (COLOUR) 500/32 4/22-12 1
The RKDG 4 terminal blocks have a
width of 6mm. They have two levels
with four connection points and
can handle solid or stranded wire
up to 4mm 2 . Their tightening screw
is accessible even when wired. The
operating temperature is -40°C to
+120°C. Standard colour is beige,
for colour option see below.
RKDG 4
6.0mm
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped onto TS 35
DIN rail
Standards
IEC, CSA approved, RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
Pack
quantity
RKDG 4 (COLOUR) 500/32 4/22-12 1
HF
Halogen
Free
DIN rail mounted terminals & accessories
RKD 4/35 accessories
RKDG 4 accessories
144.0 SES 35 ES 35 x 210.0mm 144.0 SES 35 ES 35 x 210.0mm x Other colours may be available on request – minimum order
Other colours may be available on request – minimum order
quantities apply.
quantities apply.
144.0 x 210.0mm
Accessory type Part number Standard colour Pack quantity
End plate AP 4 Beige 1
Two pole cross connector Q 2-1.5 - 1
Three pole cross connector Q 3-1.5 - 1
Four pole cross connector Q 4-1.5 - 1
Ten pole cross connector Q 10-1.5 - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
6.0mm
Accessory type Part number Standard colour Pack quantity
End plate APG4 Beige 1
Two pole cross connector Q 2 -1.5 - 1
Three pole cross connector Q 3 -1.5 - 1
Four pole cross connector Q 4-1.5 - 1
Ten pole cross connector Q 10-1.5 - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
392
26.0mm
26.0mm
393

CONNECT
6.0mm
6.0mm
Double-deck SRKD terminals
Double-deck terminals - SRKD (2x2 connections)
6.0mm
6.0mm
CONNECT
Double-deck SRKD terminals
DIN rail mounted terminals & accessories
SRKD 2.5 – wire cross section 2.5mm 2
The SRKD feed-through
terminal blocks are compatible
with the same cross-connectors
as the SRK range. The SRKD
2.5 is 5.1mm wide and has a
maximum current capacity
of 32(A). The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour option see below.
SRKD 2.5
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35 DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
Pack
quantity
SRKD 2.5 (COLOUR) 1000/32 2.5/30-12 1
HF
Halogen
Free
SRKD 4 – wire cross section 4.0mm 2
The SRKD feed-through terminal
blocks are compatible with the
same cross-connectors as the
SRK range. The SRKD 4 is 6.1mm
wide and has a maximum
current capacity of 41(A). The
operating temperature is -40°C
to +120°C. Standard colour is
beige, for colour option see
below.
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
144.0 x 210.0mm x 144.0 x 210.0mm x SRKD 4
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
Pack
quantity
SRKD 4 (COLOUR) 1000/41 4.0/26-10 1
HF
Halogen
Free
DIN rail mounted terminals & accessories
12.0mm
SRKD 2.5 accessories
SES 35 ES 35
Other colours may be available on request – minimum order
quantities apply.
6.0mm
SRKD 4 accessories
SES 35 ES 35
Other colours may be available on request – minimum order
quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 2.5/2 Yellow 1
Three pole insulated cross connector SQI 2.5/3 Yellow 1
Four pole insulated cross connector SQI 2.5/4 Yellow 1
Ten pole insulated cross connector SQI 2.5/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
Accessory type Part number Standard colour Pack quantity
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 4/2 Yellow 1
Three pole insulated cross connector SQI 4/3 Yellow 1
Four pole insulated cross connector SQI 4/4 Yellow 1
Ten pole insulated cross connector SQI 4/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
394
11.0mm
395

CONNECT
Double-deck SRKD terminals
SRKD 10 – wire cross section 10.0mm 2
6.0mm
6.0mm
Double-deck SRKD terminals
Double-deck terminals - SRKD (4 connections)
CONNECT
DIN rail mounted terminals & accessories
The SRKD feed-through terminal
blocks are compatible with
the same cross-connectors
as the SRK range. The SRKD
10 is 10.1mm wide and has
a maximum current capacity
of 76(A). The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour option see below.
SRKD 10
SES 35 ES 35
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
12.0mm
SCREW
Pack
quantity
SRKD 10 (COLOUR) 1000/76 10.0/18-6 1
SRKD 10 accessories
Other colours may be available on request – minimum order
quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate SAPD 10 Beige 1
Two pole insulated cross connector SQI 10/2 Yellow 1
Three pole insulated cross connector SQI 10/3 Yellow 1
Four pole insulated cross connector SQI 10/4 Yellow 1
Ten pole insulated cross connector SQI 10/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
SRKD 2.5/SV – wire cross section 2.5mm 2
The SRKD feed-through terminal
blocks are compatible with
the same cross-connectors
as the SRK range. The SRKD
2.5 is 5.1mm wide and has a
maximum current capacity
of 32(A). The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour option see below.
SRKD 2.5/SV
6.0mm
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35 DIN
rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SRKD 2.5/SV accessories
SES 35 ES 35
Accessory type Part number Standard colour Pack quantity
SCREW
Pack
quantity
SRKD 2.5/SV (COLOUR) 1000/32 2.5/30-12 1
Other colours may be available on request – minimum order
quantities apply.
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 2.5/2 Yellow 1
Three pole insulated cross connector SQI 2.5/3 Yellow 1
Four pole insulated cross connector SQI 2.5/4 Yellow 1
Ten pole insulated cross connector SQI 2.5/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
DIN rail mounted terminals & accessories
12.0mm
396
26.0mm
26.0mm
11.0mm
397

CONNECT
6.0mm
Double-deck SRKD terminals
SRKD 4/SV – wire cross section 4.0mm 2
6.0mm
SRKD 10/SV – wire cross section 10.0mm 2
CONNECT
Double-deck SRKD terminals
DIN rail mounted terminals & accessories
The SRKD feed-through
terminal blocks are
compatible with the same
cross-connectors as the SRK
range. The SRKD 4 is 6.1mm
wide and has a maximum
current capacity of 41(A). The
operating temperature is -40°C
to +120°C. Standard colour is
beige, for colour option see
below.
SRKD 4/SV
SRKD 4/SV accessories
SES 35 ES 35
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Accessory type Part number Standard colour Pack quantity
SCREW
Pack
quantity
SRKD 4/SV (COLOUR) 1000/41 4.0/26-10 1
12.0mm
Other colours may be available on request – minimum order
quantities apply.
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 4/2 Yellow 1
Three pole insulated cross connector SQI 4/3 Yellow 1
Four pole insulated cross connector SQI 4/4 Yellow 1
Ten pole insulated cross connector SQI 4/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
6.0mm
The SRKD feed-through terminal
blocks are compatible with
the same cross-connectors
as the SRK range. The SRKD
10 is 10.1mm wide and has
a maximum current capacity
of 76(A). The operating
temperature is -40°C to +120°C.
Standard colour is beige, for
colour option see below.
SRKD 10/SV
SRKD 10/SV accessories
144.0 x 210.0mm x 144.0 x 210.0mm x SES 35 ES 35
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped onto TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
OTHER COLOUR AVAILABLE How to order Add the colour to the end of the part number.
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SCREW
Pack
quantity
SRKD 10 (COLOUR) 1000/76 10.0/18-6 1
6.0mm
Accessory type Part number Standard colour Pack quantity
End plate SAPD 10 Beige 1
Two pole insulated cross connector SQI 10/2 Yellow 1
Three pole insulated cross connector SQI 10/3 Yellow 1
Four pole insulated cross connector SQI 10/4 Yellow 1
Ten pole insulated cross connector SQI 10/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
SRK AND SSL TERMINAL TYPE HOUSING INSULATION MATERIAL
HF
Other colours may be available on request – minimum order
quantities apply.
Halogen
Free
DIN rail mounted terminals & accessories
12.0mm
398
26.0mm
Specification
• Polyamide PA6.6 UL 94, flammability class V0, self extinguishing without
burning drops.
• Free of hazardous material such as halogen or phosphor
• Creepage resistance: CTI 600
• Operating temperature from -40 °C to +120 °C
26.0mm
12.0mm
399

CONNECT
Double-deck SSLD terminals
6.0mm
Double-deck terminals - SSLD (4 connections)
SSLD 4/SV – wire cross section 4.0mm 2
6.0mm
CONNECT
Double-deck SSLD terminals
DIN rail mounted terminals & accessories
SSLD 2.5/SV – wire cross section 2.5mm 2
The SSLD feed-through terminal
blocks are configured with a PE
foot for contact on both sides
allowing the terminal to be
snapped on to TS 35 rails without
the use of screws. The SSLD 2.5 is
5.1mm wide and has a maximum
current capacity of 32(A).
The operating temperature is
-40°C to +120°C.
SSLD 2.5/SV
12.0mm
SSLD 2.5/SV accessories
SES 35 ES 35
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Accessory type Part number Standard colour Pack quantity
SCREW
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 2.5/2 Yellow 1
Three pole insulated cross connector SQI 2.5/3 Yellow 1
Four pole insulated cross connector SQI 2.5/4 Yellow 1
Ten pole insulated cross connector SQI 2.5/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Pack
quantity
SSLD 2.5/SV GREEN/YELLOW 1000/32 2.5/30-12 1
Other colours may be available on request – minimum order
quantities apply.
Halogen
Free
SES 35 ES 35
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
The SSLD feed-through terminal
blocks are configured with a PE
foot for contact on both sides
allowing the terminal to be
snapped on to TS 35 rails without
the use of screws. The SSLD 4/SV is
5.1mm wide and has a maximum
current capacity of 32(A).
The operating temperature is
-40°C to +120°C.
SSLD 4/SV
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped onto TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
6.0mm
SSLD 4/SV accessories
Accessory type Part number Standard colour Pack quantity
SCREW
End plate SAPD 2.5-4 Beige 1
Two pole insulated cross connector SQI 4/2 Yellow 1
Three pole insulated cross connector SQI 4/3 Yellow 1
Four pole insulated cross connector SQI 4/4 Yellow 1
Ten pole insulated cross connector SQI 4/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
Pack
quantity
SSLD 4/SV (COLOUR) GREEN/YELLOW 1000/41 4.0/26-10 1
Other colours may be available on request – minimum order
quantities apply.
DIN rail mounted terminals & accessories
12.0mm
12.0mm
400
11.0mm
401

CONNECT
Double-deck SSLD terminals
CONNECT
Triple-deck terminals
SSLD 10/SV – wire cross section 10.0mm 2
Triple-deck initiator terminals
DIN rail mounted terminals & accessories
The SSLD feed-through
terminal blocks are
configured with 2x2
connections. The SSLD 10 is
10.1mm wide. The operating
temperature is -40°C to
+120°C.
SSLD 10/SV
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - VO
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
Part number Colour Conductor
mm 2 /AWG
SCREW
Pack
quantity
SSLD 10/SV (COLOUR) GREEN/YELLOW 10.0/18-6 1
SSLD 10/SV accessories
144.0 x 210.0mm
SES 35 ES 35
144.0 x 210.0mm
Other colours may be available on request – minimum order
quantities apply.
Accessory type Part number Standard colour Pack quantity
End plate SAPD 10 Beige 1
Two pole insulated cross connector SQI 10/2 Yellow 1
Three pole insulated cross connector SQI 10/3 Yellow 1
Four pole insulated cross connector SQI 10/4 Yellow 1
Ten pole insulated cross connector SQI 10/10 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
HF
Halogen
Free
IK 2.5 – wire cross section 2.5mm 2
The IK 2.5 is a 5mm thin
initiator terminal with a screw
connection that combines all
of the connections found in an
initiator into a single terminal.
Use in combination with the
IKD 2.5 power supply terminal.
The operating temperature is
-40°C to +120°C.
IK 2.5
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS 35 DIN rail
Standards
IEC and CSA approved,
RoHS 2 compliant
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
12.0mm 6.0mm
144.0 x 210.0mm x SCREW
Pack
quantity
IK 2.5 BEIGE 250/24 2.5/22-14 1
IK 2.5 accessories
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5/ID Beige 1
Two pole cross connector Q 2-IKD - 1
Three pole cross connector Q 3-IKD - 1
Four pole cross connector Q 4-IKD - 1
Ten pole cross connector Q 10-IKD - 1
HF
Halogen
Free
End plate may be available in other colours on request – minimum order quantities apply.
DIN rail mounted terminals & accessories
402
11.0mm
11.0mm
403

DIN rail mounted terminals & accessories
CONNECT
Triple-deck terminals
IKD 2.5/Q – wire cross section 2.5mm 2
The IKD 2.5/Q base
terminal can be positioned
anywhere on the terminal
strip combination. Crossconnection
is possible on
open and closed sides of
the terminal. The operating
temperature is -40°C to
+120°C.
IKD 2.5/Q
Part number
Colour
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS 35 DIN rail
Standards
IEC and CSA approved,
RoHS 2 compliant
RATED VOLTAGE/ MAX CURRENT
IEC
Conductor
mm 2 /AWG
SCREW
Pack
quantity
IKD 2.5/Q BEIGE 250/24 2.5/22-14 1
12.0mm
IKD 2.5/Q accessories
6.0mm
Accessory type Part number Standard colour Pack quantity
End plate AP 2.5/ID Beige 1
Two pole cross connector Q 2-IKD - 1
Three pole cross connector Q 3-IKD - 1
HF
Halogen
Free
End plate may be available in other colours on request – minimum order quantities apply.
6.0mm
The TRK 1.5 features a sturdy, closed housing; the established disconnect-blade
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
Knife disconnect terminals
TRK 1.5 – wire cross section 2.5mm 2
CONNECT
Knife disconnect terminals
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS
35 DIN rail
Standards
IEC, UL and CSA approved,
RoHS 2 compliant
SCREW
with high quality surfaces; minimal and stable level of contact resistance and touchsafe
protection also during the disconnect process. The operating temperature is
-40°C to +120°C. Standard colour is beige, for colour options see below.
TRK 1.5 terminals
OTHER COLOURS AVAILABLE
6.0mm
How to order
Add the colour to the end of the part number
HF
Halogen
Free
12.0mm
DIN rail mounted terminals & accessories
Four pole cross connector Q 4-IKD - 1
Ten pole cross connector Q 10-IKD - 1
Part number RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
TRK 1.5 (COLOUR) 400/10 2.5/22-12 1
TRK 1.5 accessories
SES 35 ES 35
Other colours may be available on request – minimum order
quantities apply.
Accessory type Part number Standard colour Pack quantity
Two pole external insulated cross connector AQI2/6/17 Yellow 1
12.0mm
404
11.0mm
Three pole external insulated cross connector AQI3/6/17 Yellow 1
Four pole external insulated cross connector AQI4/6/17 Yellow 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
405

CONNECT
Protective earth terminals
6.0mm
Protective earth terminals
6.0mm
Protective earth terminals: SSL range
CONNECT
Protective earth terminals
DIN rail mounted terminals & accessories
Cablecraft offers two types of protective earth terminals – the SL and
the SSL ranges. Both are based on a screw connection system to give
a good electrical connection.
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS
35 DIN rail
Standards
IEC and UL approved, RoHS 2
compliant
SCREW
Protective earth terminals: SL range
The SL range features the
proven screw-connection
system and a metal clamping
foot to secure to the DIN
rail, to establish a quick, safe
connection for the smallest
cross sections. The operating
temperature is -40°C to
+120°C.
12.0mm
SL 2.5/35
HF
Halogen
Free
SL 4/35
6.0mm
SL 10/35
The SSL range uses a screw
connection system for solid
and flexible wires, with or
without cord end terminals.
The protective-earth terminals
feature a PE foot contact that
is snapped on without screws,
ensuring mechanical and
electrical safety. The operating
temperature is -40°C to
+120°C.
SSL range terminals
Part number Colour Conductor mm 2 /
AWG
SSL 6/2A GREEN/YELLOW 6.0/22-8 1
144.0 x 210.0mm x SSL10/2A GREEN/YELLOW 144.0 10.0/10-6 x 210.0mm x 1
6.0mm
Pack
quantity
SSL 2.5/2A GREEN/YELLOW 2.5/22-12 1
SSL 4/2A GREEN/YELLOW 4.0/22-11 1
SSL16/2A GREEN/YELLOW 16.0/16-4 1
SSL 35/2A GREEN/YELLOW 35.0/16-1/0 1
SSL 50/2A GREEN/YELLOW 50.0/8-0 1
SSL 70/2A GREEN/YELLOW 70.0/6-000 1
See overleaf for accessories
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V0
DIN rail type
Foot can be snapped onto TS
35 DIN rail
Standards
* IEC, UL and CSA approved
** IEC, UL and CSA approval
pending, RoHS 2 compliant
SCREW
SNAP ON TO RAIL TS 35
LARGE WIRE ENTRY BAY
HF
Halogen
Free
12.0mm
DIN rail mounted terminals & accessories
SL 16/35 N
SL 35/35 N
SL range terminals
Part number Colour Conductor
mm 2 /AWG
Pack
quantity
SSL 2.5/2A*
SSL 4/2A*
SSL 6/2A*
SSL 10/2A*
SL 2.5/35 GREEN/YELLOW 2.5/22-12 1
SL 4/35 GREEN/YELLOW 4.0/22-11 1
406
SL 10/35 GREEN/YELLOW 10.0/20-6 1
26.0mm
SL 16/35 N GREEN/YELLOW 16.0/10-4 1
SL 35/35 N GREEN/YELLOW 35.0/12-2 1
SSL 16/2A**
SSL 35/2A**
26.0mm
SSL 50/2A**
12.0mm
SSL 70/2A**
407

DIN rail mounted terminals & accessories
CONNECT
Protective earth terminals
SSL accessories (SSL 2.5/2A to SSL10/2A)
Accessory type Part number Pack quantity
End plate AP 2.5-10-GREEN 50
Partition plate TW 2.5-10 50
End stop - snap on SES 35 50
End stop - screw on ES 35 50
SSL 2.5/2A
Two pole insulated cross connector SQI 2.5/2 50
Three pole insulated cross connector SQI 2.5/3 50
Four pole insulated cross connector SQI 2.5/4 20
Ten pole insulated cross connector SQI 2.5/10 10
SSL 4/2A
Two pole insulated cross connector SQI 4/2 50
12.0mm
Three pole insulated cross connector SQI 4/3 50
Four pole insulated cross connector SQI 4/4 20
Ten pole insulated cross connector SQI 4/10 10
SSL 6/2A
Two pole insulated cross connector SQI 6/2 50
Three pole insulated cross connector SQI 6/3 50
Four pole insulated cross connector SQI 6/4 20
Ten pole insulated cross connector SQI 6/10 10
SSL 10/2A
6.0mm
Two pole insulated cross connector SQI 10/2 50
Three pole insulated cross connector SQI 10/3 50
Four pole insulated cross connector SQI 10/4 20
Ten pole insulated cross connector SQI 10/10 10
END STOP
SES 35
END STOP
ES 35
6.0mm
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
Fuse disconnect terminals
STK 2 wire cross section 4mm 2
Universal foot, fits
symmetrical (top hat) and G
rail. Takes 20mm fuse up to
6.3A. Lever lifts to isolate and
remove fuse. The operating
temperature is -40°C to
+120°C.
SPECIFICATIONS
Material
Polyamide 6.6 UL 94 - V2
DIN rail type
Foot can be snapped on to TS
35 DIN rail and G rail
Standards
IEC, UL and CSA approved,
RoHS 2 compliant
Fuse disconnect terminals
SCREW
Accessory for fuse disconnect terminals
HF
Halogen
Free
6.0mm
Part number Colours available IEC Conductor mm 2 /
AWG
CONNECT
Fuse disconnect terminals
STK 2 (COLOUR) BEIGE BLUE 500/6.3 4.0/22-12 1
End plate may be available in other colours on request – minimum order quantities apply.
Accessory type Part number Standard colour Pack quantity
Pack
12.0mm
quantity
DIN rail mounted terminals & accessories
End plates AP/SI-2 Beige 1
SSL accessories (SSL 16/2A to SSL35/2A)
Accessory type Part number Pack qty
SSL 16/2A
408
End plate SAP 16/2A-GREEN 20
Two pole insulated cross connector SQI 16/2 20
SSL 35/2A
26.0mm
Two pole insulated cross connector SQI 35/2 20
26.0mm
11.0mm
409

DIN rail mounted terminals & accessories
CONNECT
Fuse disconnect terminals
SSIK 4 and SSIK 6 wire cross section 4-6mm 2
The SSIK fuse-disconnect terminals
are compatible with the same crossconnectors
as the SRK range. They
are made from glass-fibre re-inforced
polyamide. With good dimensional
stability up to high temperatures,
they enable new applications in
electrical engineering. The operating
temperature is -40°C to +140°C.
SCREW
HF
Halogen
Free
Fuse disconnect terminals
SPECIFICATIONS
Material
Glass-fibre reinforced polyamide 6.6 UL
94 - V0
DIN rail type
Foot can be snapped on to TS 35 DIN rail
Standards
IEC, UL and CSA approval pending,
RoHS 2 compliant
Fuse sizes
SSIK 4/2A compatible with
5x20/5x25/5x30
SSIK 6/2A compatible with 6.3x25/6.3x32
Part number Colours available IEC Conductor mm 2 /
AWG
Pack
quantity
SSIK 4/2A BLACK 500/10 4.0/22-11 1
SSIK 6/2A BLACK 500/10 6.0/13-4 1
Accessories for SSIK 4/2A
12.0mm
6.0mm
6.0mm
HT
High
temperature
Other colours may be available on request – minimum order quantities apply.
SSIK 6/2A
SSIK 4/2A
Accessory type Part number Standard colour Pack quantity
End plates SAP-SSIK Black 1
Two pole insulated cross connector SQI 4/2 Yellow 1
Three pole insulated cross connector SQI 4/3 Yellow 1
Four pole insulated cross connector SQI 4/4 Yellow 1
6.0mm
6.0mm
6.0mm
HSKG stud connection system
Cablecraft HSKG stud connection system offers secure
connections for all energy transmitting applications.
Depending on the wire cross-section, the stud terminals can
be used with M6, M8, M10, M12 and M16 threaded studs.
When used with the ADH hinged covers, outstanding touch
protection is achieved.
HSKG stud connection system
SPECIFICATIONS
HSKG 35/M6/B/B wire cross section 35mm
144.0 x 210.0mm x 144.0 x 210.0mm x 2
HSKG 35/M6/B/B high-power stud terminal is suitable for wire size 35mm 2 . The
cable terminal, when placed on the stud and tightened, forms a secure contact
with another terminal or busbar.
HSKG 35/M6/B/B
HSKG 35/M6/B/B accessories
STUD
Material
Polyamide 6.6 UL 94 - V0
CONNECT
DIN rail type
Foot can be snapped on to TS 35
DIN rail
Temperature range
-40°C to +105°C
HF
Halogen
Free
Standards
EN 60947-7-1, EN 50124-1, DIN EN
61373. IEC, UL and CSA approved,
RoHS 2 compliant
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
SES 35 ES 35
Pack
quantity
HSKG 35/M6/B/B (COLOUR) BEIGE 1000/125 35/14-2 1
DIN rail mounted terminals & accessories
Accessories for SSIK 6/2A
410
Other colours may be available on request – minimum order quantities apply.
Accessory type Part number Standard colour Pack quantity
11.0mm
End plates SAP-SSIK Black 1
Two pole insulated cross connector SQI 6/2 Yellow 1
Three pole insulated cross connector SQI 6/3 Yellow 1
Four pole insulated cross connector SQI 6/4 Yellow 1
Accessory type Part number Colours available Pack quantity
Cover profile ADH-35 ADH 35 (COLOUR) YELLOW BLUE 1
QS cross-connection rail QS 2/35/6 - 1
QS cross-connection rail QS 3/35/6 - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES35 KST Beige 1
411

CONNECT
HSKG stud connection system
HSKG 70/M8/B/B wire cross section 70mm 2
6.0mm
6.0mm
HSKG 185/M12/B/B wire cross section 185mm 2
CONNECT
HSKG stud connection system
DIN rail mounted terminals & accessories
HSKG 70/M8/B/B high-power stud terminal is suitable for wire size 70mm 2 . The cable terminal, when
placed on the stud and tightened, forms a secure contact with another terminal or busbar.
HSKG 70/M8/B/B
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
HSKG 70/M8/B/B BEIGE 1000/192 70/14-00 1
HSKG 70/M8/B/B accessories
SES 35 ES 35
Accessory type Part number Colours available Pack quantity
Cover profile ADH ADH 70 (COLOUR) YELLOW BLUE 1
QS cross-connection rail QS 2/70/8 - 1
QS cross-connection rail QS 3/70/8 - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
HSKG 120/M10/B/B wire cross section 120mm 2
HSKG120/M10/B/B high-power stud terminal is suitable for wire size 120mm 2 .
The cable terminal, when placed on the stud and tightened, forms a secure
contact with another terminal or busbar.
HSKG 120/M10/B/B
144.0 x 210.0mm x 144.0 x 210.0mm x Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
HSKG 120/M10/B/B BEIGE 1000/269 120/10-Kcmil 250 1
6.0mm
HSKG185/M12/B/B high-power stud terminal is suitable for wire size 185mm 2 . The cable terminal,
when placed on the stud and tightened, forms a secure contact with another terminal or busbar.
HSKG 185/M12/B/B
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
HSKG 185/M12/B/B accessories
SES 35 ES 35
Accessory type Part number Colours available Pack quantity
Cover profile ADH ADH 185 (COLOUR) YELLOW BLUE 1
QS cross-connection rail QS 2/185/12 - 1
QS cross-connection rail QS 3/185/12 - 1
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
HSKG 300/M16/B/B wire cross section 300mm 2
HSKG300/M16/B/B high-power stud terminal is suitable for wire size 300mm 2 .
The cable terminal, when placed on the stud and tightened, forms a secure contact
with another terminal or busbar.
Pack
quantity
HSKG 185/M12/B/B BEIGE 1000/353 185/10-Kcmil 500 1
6.0mm
HSKG 300/M16/B/B
Part number Colour RATED VOLTAGE/ MAX CURRENT Conductor
IEC
mm 2 /AWG
Pack
quantity
HSKG 300/M16/B/B BEIGE 1000/520 300/10-Kcmil 600 1
DIN rail mounted terminals & accessories
HSKG 120/M10/B/B accessories
SES 35 ES 35
HSKG 300/M16/B/B accessories
SES 35 ES 35
412
Accessory type Part number Colours available Pack quantity
Cover profile ADH ADH 120 (COLOUR) YELLOW BLUE 1
QS cross-connection rail QS 2/120/10 - 1
QS cross-connection rail QS 3/120/10 - 1
26.0mm
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
Accessory type Part number Colours available Pack quantity
Cover profile ADH ADH 300 (COLOUR) YELLOW BLUE 1
QS cross-connection rail QS 2/300/16 - 1
QS cross-connection rail QS 3/300/16 - 1
26.0mm
End stop – snap on SES 35 Beige 1
End stop – screw on ES 35 Beige 1
End stop – screw on heavy duty ES 35 KST Beige 1
413

DIN rail mounted terminals & accessories
414
CONNECT
Terminal markers
Other accessories
Markers: SB5 range to fit SRK 2.5 terminals
To fit SRK 2.5 terminals
or those wider than
5mm.
SB5 terminal markers
Part number Marks included Colours
available
Marker size
L x W (mm)
SPECIFICATIONS
Material Polyamide 6.6 UL 94 - V2
Temperature range
-40°C to +105°C
Standards RoHS 2 compliant
Markers per
row
Pack
quantity
SB5/10FW-1 1-10 Black on white 5 x 5 10 1
SB5/10FW-2 11-20 Black on white 5 x 5 10 1
SB5/10FW-3 21-30 Black on white 5 x 5 10 1
SB5/10FW-4 31-40 Black on white 5 x 5 10 1
SB5/10FW-5 41-50 Black on white 5 x 5 10 1
SB5/10FW-6 51-60 Black on white 5 x 5 10 1
SB5/10FW-7 61-70 Black on white 5 x 5 10 1
SB5/10FW-8 71-80 Black on white 5 x 5 10 1
SB5/10FW-9 81-90 Black on white 5 x 5 10 1
SB5/10FW-10 91-100 Black on white 5 x 5 10 1
Markers: SB6 range to fit SRK 4.0 terminals
To fit SRK 4.0 terminals or
those wider than 6mm.
SB6 terminal markers
Part number Marks included Colours
available
Marker size
L x W (mm)
SPECIFICATIONS
Markers per
row
HF
Halogen
Free
Material Polyamide 6.6 UL 94 - V2
Temperature range
-40°C to +105°C
Standards RoHS 2 compliant
Pack
quantity
SB6/10FW-1 1-10 Black on white 5 x 6 10 1
SB6/10FW-2 11-20 Black on white 5 x 6 10 1
SB6/10FW-3 21-30 Black on white 5 x 6 10 1
SB6/10FW-4 31-40 Black on white 5 x 6 10 1
SB6/10FW-5 41-50 Black on white 5 x 6 10 1
SB6/10FW-6 51-60 Black on white 5 x 6 10 1
12.0mm
6.0mm
SB6/10FW-7 61-70 Black on white 5 x 6 10 1
SB6/10FW-8 71-80 Black on white 5 x 6 10 1
26.0mm
SB6/10FW-9 81-90 Black on white 5 x 6 10 1
SB6/10FW-10 91-100 Black on white 5 x 6 10 1
6.0mm
Slotted DIN rail and brackets
A galvanised steel DIN rail
manufactured to a high
degree of dimensional
accuracy. Available in lengths
from 250mm to 2m. Steel
brackets are available –
height 48mm.
SPECIFICATIONS
Material
Galvanised steel
Standards
Complies with DIN EN 60715.
RoHS 2 compliant
DIN rail and bracket
DIN rail & DIN rail cutting tool
144.0 x 210.0mm x 144.0 x 210.0mm x 6.0mm
DIN rail cutting tool
6.0mm
26.0mm
CONNECT
Part no. Description Size Pack quantity
TS15/250 250mm slotted rail 250mm 1
TS35/250 250mm slotted rail 250mm 1
TS35/F.10 1000mm slotted rail 1m 10
TS35/F 2000mm slotted rail 2m 20
TSTW/M5 Bracket – 45° angle 48mm 1
TSTW/M6 Bracket – 45° angle 48mm 1
SPECIFICATIONS
• Suitable for 35mm top hat DIN Rail.
• 350mm long handle
• Clamps onto a vice or bolts on bench.
• Produces half cut for end stops. No burrs.
• Open throat with unique design and replaceable blades.
Cutting tool
Part number Description Pack
quantity
DIN-CUTTER DIN rail cutter 1
DIN-CUTTER BLADE Spare blade 1
415
DIN rail mounted terminals & accessories