LCDBFD19WX.data sheet.v1
Transform your PDFs into Flipbooks and boost your revenue!
Leverage SEO-optimized Flipbooks, powerful backlinks, and multimedia content to professionally showcase your products and significantly increase your reach.
19" Widescreen "Lockable" Dropdown
Ceiling Mount Metal Monitor
Instruction Manual v1.0
Model #
LCDBFD19WX
Table of Contents
1.0 Key Features …......……..................................................................................... Page 1
2.0 Cautionary .……...................…............................................................................... Page 1
3.0 Wire Connections …................................................................................................ Page 2
4.0 Remote Control Button Functions …..................................................................... Page 2
5.0 Menu Descriptions …......……....…............................................................................. Page 3
6.0 Adjust the Screen Angle .……....…............................................................................. Page 3
7.0 Specifications …......……....…............................................................................. Page 4
8.0 Troubleshooting Tips …......……....…............................................................................. Pages 4
1.0 Key Features
1.1 19" drop-down heavy-duty metal housing
1.2 1025 x 768 Resolution
1.3 16:9 Widescreen
1.4 Lockable drop down mount
1.5 12 or 24 VDC operation
2.0 Cautionary
2.1 Do not shake the LCD screen with your hands or other instruments.
2.2 The power supply of this unit operates on 12 VDC or 24 VDC.
2.3 The unit cannot be exposed to rain or highly humid places.
2.4 The installation location should avoid direct sunlight or close to other heat sources
2.5 The part where the monitor is installed must have sufficient strength to withstand the weight
of the unit and the pulling force generated during bumps.
2.6 There is high voltage inside the monitor and strongly recommend NOT open unit, injuries may occur
2.7 If foreign matter or liquid falls into the monitor, turn off the power and then send it to repair shop.
2.8 The surface of the LCD screen is made of special materials. Do not scratch the surface of screen.
2.9 If the surface of the LCD screens Is stained., Turn off the Power, then use a clean soft cotton rag to wipe.
2.10 The control port can only be connected to the control switch, and not directly connected to power source.
Accele Electronics 800-788-1212 Page
1
19" Widescreen "Lockable" Dropdown
Ceiling Mount Metal Monitor
Instruction Manual v1.0
Model #
LCDBFD19WX
3.0 Wire Connections
3.1 Mount the monitor on a suitable strong roof rack with screws with diameter of 6 cm or bigger.
3.2 Red Wire => +12 VDC or +24 VDC
3.3 Black Wire => Ground
3.4 RCA yellow Video Input
3.5 Turn on power after all wire connection are secure
4.0 Remote Control Button Functions
Accele Electronics 800-788-1212
Page
2
19" Widescreen "Lockable" Dropdown
Ceiling Mount Metal Monitor
Instruction Manual v1.0
Model #
LCDBFD19WX
5.0 Menu Descriptions
Using the on-screen menu system, you can adjust various features shown below
5.1 Image
5.2 Sound
5.3 Time
5.1.1 Image Model : Adjusted to Standard, soft or dynamic
5.1.2 Color Temperature : Adjust vividness of the color
5.1.3 Zoom Mode : Scaling of the image
5.1.4 Noise Reduction : Reduce the noise of the videos or images on the display
5.2.1 Sound Mode : Select and customize sound patterns
5.2.2 Balance : Adjust the volume balance of the left and right channels
5.2.3 Automatic Volume : On/Off
5.3.4 Surround : On/Off
5.3.5 Equalizer : Adjust the sound effects of various frequencies
5.3.1 Clock : Set the current time (for timing switch)
5.3.2 Boot Time : Set the boot time of the unit
5.3.3 Shutdown Time : Set the shutdown time of the unit
5.3.4 Sleep Time : Set the sleep time of the unit
5.4 Setting
5.4.1 Menu Language : Set the menu language
5.4.2 Menu Reset : Factory reset for various display parameters
5.4.3 Menu Transparency : Adjust the transparency of the menu background
5.4.4 Menu Disappear Time : Set the display time of the menu, goes back to previous mode
5.5 Frequency
5.5.1 System Upgrade : Disable (Factory Channel)
5.5.2 FM Frequency : The unit transmit frequency can be adjusted
(Default FM frequency is 87.7 MHz)
6.0 Adjust the Screen Angle
5.5.1 System Upgrade : Disable (Factory Channel)
5.5.2 FM Frequency : The unit transmit frequency can be adjusted
(Default FM frequency is 87.7 MHz)
Accele Electronics 800-788-1212
Page
3
19" Widescreen "Lockable" Dropdown
Ceiling Mount Metal Monitor
Instruction Manual v1.0
Model #
LCDBFD19WX
7.0 Specifications
7.1 Display Size : Turn Monitor On or Off
7.2 Video System : NTSC / PAL Auto Switching
7.3 Max Resolution : 1440 * 900
7.4 Operating Voltage : 12 / 24 VDC
7.5 Video Signal Input : RCA video
7.6 Brightness : 400 Nit
7.7 Contrast : 400 : 1
7.8 Viewing Angle : 160 Degrees (L / R) & 130 Degrees (U / D)
7.9 Overall Dimensions, inches : Width = 19.50 x Depth 13.0 x Thickness = 2.0 inches
7.10 Overall Dimensions, mm : Width = 495.30 mm x Depth 330.20 mm x Thickness = 50.80 mm
7.11 Mourning Footprint : W = 10.0" x D = 5.0" (254.0 mm x 127.0 mm)
7.12 Maximum Horizontal Scanning : 60 Hz
7.13 Maximum Scanning Frequency : 85 Hz
8.0 Troubleshooting Tips
Malfunction
Malfunction Analysis
8.1
8.2
8.3
No Image
"Input Not Supported" Appears
Image is too bright or too dark
To check the power is on of off, or to check the signal input is
connected or not
The display mode of the input signal is not supported, please
refer to "Display Mode)
Use "Auto Correction" or adjust the brightness and contrast
manually, please refer to "On-Screen Menu System"
8.4
"No signal" appears
Check the signal input is connected securely
8.5
Color Cast
Use "Automatic Correction" or adjust the "RGB" three
primary colors manually, please refer to "On-Screen Menu
System"
Accele Electronics 800-788-1212
Page
4