RVCWLCK.Instructions.v1

by
Commercial Grade Wireless
Camera and Receiver
Operation Instruction v1.3
Model #
RVCWLCK
1.0 Connect Power to Camera Wires 2.0 Connect Power & Video Output to Receiver
Camera Transmits Video Signal
Receives Video Signal
* Red Wire = 12 VDC (IGN) * Red Wire = +12 VDC (IGN)
* Black Wire = Ground * Black Wire = Ground
* Yellow RCA Male Connector = Video Output
* Antenna bends up to 90 degrees
3.0 Camera and Receiver should be no farther away then 20 feet from each other for pairing, prefer within 5 feet.
4.0 Pairing Camera and Receiver
a. Press and Hold the reset Button for 5 seconds on the receiver & the unit will pair
5.0 Specs
5.1 Wireless Receiver : 2.4 GHz
5.2 Camera Image Device : 1/2.9 CMOS
5.3 Resolution : 420 TV Line
5.4 Operation Frequency : 2.4 GHz
5.5 Operating Temperature : -20 to 70C
5.6 Storage Temperature : -30 to 80C
5.7 Minimum Illumination : 0 Lux / 0.1 Lux
5.8 Operation Power Supply : 12 VDC System
5.9 Waterproof Rating : IP69K
09.10.2025
9130 Norwalk Blvd. Sante Fe Springs, CA 90670 (800) 788-1212 www.accele.com