TG Industriedienstleistungen GmbH profiles overview incl

2026

PROFILES FOR SHOWER PARTITIONS

profile overview

main program

&

special program

Effective 13.11.2025

TG-Industriedienstleistungen GmbH

Tel.: 0 52 06 / 91 81 - 720

Fax.: 0 52 06 / 91 81 - 726

E-Mail: info@tg-industrie.de

1

DIRECTORY

1. GENERAL INFORMATIONS .......................................................................................... 2

2. THE STRUCTURE OF OUR ARTICLE NUMBER .......................................................... 3

3. MAIN PROGRAM ........................................................................................................... 5

3.1 PROFILES WITH 5 MM OVERLAP FOR 8 MM THICK ESG* ..................................... 5

3.2 PROFILES WITH 12 MM OVERLAP FOR 6-8 MM ESG* ............................................ 7

3.3 PROFILES WITH 13 – 15 MM OVERLAP FOR 8-10 MM ESG* ............................... 15

3.4 PROFILE WITH 12 MM OVERLAP FOR 10-12 MM ESG* ........................................ 16

3.5 TUB SEALS, SQUARE & ANGLE PROFILES AND TOOLS ..................................... 18

3.6 BRUSH SEAL PROFILE WITH 12 MM OVERLAP FOR 8 MM AND 10 MM GLASS .....19

4. SPECIAL PROGRAM ....................................................................................................20

4.1 PROFILES WITH 12 MM OVERLAP FOR 4,8-5 MM THICK ESG* .......................... 20

4.2 PROFILES WITH 5 MM OVERLAP FOR 6 MM ESG* ............................................... 22

5. SVHC DUTIES TO COMMUNICATE INFORMATION (REACH) ...................................23

TG-Industriedienstleistungen GmbH – Lechtermannshof 3 – 33739 Bielefeld, Germany

Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


2

1. GENERAL INFORMATIONS

We offer basically seal profiles from the producer REHAU.

Because of their high-quality material formulation, especially aligned with your installation system,

REHAU shower partition seal profiles are suitable for use in a wide variety of shower partition seal

system, for example:

- All-glass shower cubicle

- Framework shower cubicles

- Bath fixtures

- Other types of partitions

Advantages offered by REHAU profiles in rigid/plasticized PVC:

- UV resistance.

UV resistance is tested in REHAU using XENON TEST 1200, cycle 102/18, alternate cycling.

Laboratory result: > 1.000 hrs. until there is a noticeable change in colour.

- Crystal clear colour matching (rigid PVC)

- Acrylic compatibility.

Contact by those profiles made of plasticised PVC with acrylic, PS sheets etc. can lead to stress

cracking and hardening of plasticised PVCs. The use if RAU-PVC 7539 (acrylic resistant

formulation) eliminates this chemical reaction.

Testing is done following DIN 53405, which states that migration of plasticizer during the test

period of 15 days, at 50°C with 5 kg loading may amount max. 10 mg.

- Structured soft PVC lips improver the sliding behaviour as regards the glass or adjacent

components.

Storage

- Store away from direct sunlight.

- Store in a dry place at room temperature of max. 30°C.

- Only store in wrapped condition and away from odour-forming substances (e.g. rubber).

- Shelf life: max. one year, profiles with adhesive tapes: max. 6 months


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


3

2. THE STRUCTURE OF OUR ARTICLE NUMBER

Our article code is based on the following System:

6072.11.2010

Length [mm]

Colour

Article

Colour Code:

01: Rigid material satinised transparency

Soft material

clear transparency

Magnet coating light grey (similar RAL 7035)

02: Rigid material satinised transparency

Soft material

clear transparency

Magnet coating silver grey metallic (similar RAL 9023)

05: Rigid material satinised transparency or

Rigid material

clear transparency

Soft material 1

clear transparency or

Soft material 1

structured transparency

Soft material 2


11: Rigid material clear transparency

Soft material 1


Soft material 1


Soft material 2

clear transparency

Magnet coating light grey (similar RAL 7035)


Soft material 1


Soft material 2

clear transparency

Magnet coating silver grey metallic (similar RAL 9023)


Soft material 1


Soft material 1


Soft material 2


10: Aluminium white

20: Aluminium satin anodized

30: Aluminium chrome effect

33: Aluminium brass effect


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


4

084261.06.2500

Länge [mm]

Farbe

Artikel

Colour Code Brush Seal Profiles

06: Rigid material (PC) clear transparency

Brush seal (PP)

colour grey 06 mm

11. Rigid material (PC) clear transparency

Brush seal (PP)

colour grey 11 mm


Brush seal (PP)

colour grey 15 mm


Brush seal (PP)

colour grey 20 mm


Brush seal (PP)

colour grey 25 mm


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


5

3. MAIN PROGRAM

3.1 PROFILES WITH 5 MM OVERLAP FOR 8 MM THICK ESG*

Soft nose seals

Art. No. 5148.15.2030 PU 256 pcs

Art. No. 5148.15.2500 PU 256 pcs

Rigid PVC: clear transparency

Soft PVC: opening area: structured transparency

Soft PVC: soft lip: structured transparency

Art. No. 5038.15.2010 PU 187 pcs

Art. No. 5038.15.2500 PU 187 pcs


Soft PVC: opening area: clear transparency

Soft PVC: soft lips: structured transparency

Water deflectors

Art. No. 5108.15.2200 PU 88 pcs




Art. No. 5118.15.2200 PU 432 pcs




Lip seal

Art. No. 5111.05.2010 PU 135 pcs

Rigid PVC: satinised transparency



*ESG = single-pane safety glass


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


6

Gab seal

Art. No. 5130.05.2010 PU 165 pcs

Art. No. 5130.05.2500 PU 165 pcs




Magnetic door seals

Art. No. 6078.12.2500 PU 160 pcs



Soft PVC: magnet pocket: clear transparency

Magnet coating: silver-grey metallic

Art. No. 6088.12.2500 PU 160 pcs





Art. No. 6098.12.2500 PU 224 pcs






Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


7

3.2 PROFILES WITH 12 MM OVERLAP FOR 6-8 MM ESG*

Lip seals

Art. No. 5001.15.2010 PU 240 pcs

Art. No. 5001.15.2500 PU 240 pcs




Art. No. 5011.15.2010 PU 143 pcs

Art. No. 5011.15.2500 PU 143 pcs




Art. No. 5071.15.2010 PU 240 pcs

Art. No. 5071.15.2500 PU 240 pcs




Art. Nr. 5091.15.2500 PU 195 pcs




Art. No. 5112.15.2010 PU 238 Stück

Art. No. 5112.15.2500 PU 238 Stück




Central lip seals

Art. No. 5121.05.2010

Art. No. 5121.05.2500

Art. No. 5122.05.2010

Art. No. 5122.05.2500









Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


8

Soft nose seals

Art. No. 5042.15.2010 PU 153 pcs

Art. No. 5042.15.2200 PU 153 pcs

Art. No. 5042.15.2500 PU 153 pcs




Art. Nr. 5021.15.2010 VE 136 Stück

Art. Nr. 5021.15.2500 VE 136 Stück




Water deflectors

Art. No. 5160.15.2010 PU 32 pcs




Sliding door seals

Art. No. 5104.05.2050 PU 64 pcs

can be shortened to 15 mm.




Art. No. 5211.15.2500 PU 240 pcs

Art. No. 5240.15.2010 PU 192 pcs








Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


9

Water deflectors

Water deflectors curved

Art. No. 5101.05.2010 PU 63 pcs

Art. No. 5101.05.2500 PU 130 pcs




Art. No. 5101.05.0500

Art. No. 5101.05.0550 curved

Radius 500 mm / 90°

Length: ca.1194 mm

Straight nose: 200 mm both-sided.


Length: ca.1263 mm

Straight nose: 200 mm both-sided

Art. No. 5101.05.0135 curved


Length: ca. 890 mm



Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


10

Water deflectors

Water deflectors / curved

Art. No. 5102.05.2010 PU 70 pcs

Art. No. 5102.05.2500 PU 150 pcs




Art. No. 5102.05.0500

Art. No. 5102.05.0550 gebogen


Length: ca.1194 mm



Length: ca.1263 mm


Art. No. 5102.05.0135 curved


Length: ca. 890 mm



Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


11

Water deflectors

Water deflectors / curved

Art. No. 5141.15.2010 PU 48 pcs

Art. No. 5141.15.2500 PU 48 pcs




Art. No. 5141.15.0500

Art. No. 5141.15.0550 curved.


Length: ca.1194 mm



Length: ca.1263 mm


Water deflector

Art. No. 5325.05.2010 PU 20 pcs

Art. No. 5325.05.2500 PU 35 pcs




Art. No. 8140.01.0001

PVC plugs for Art. No. 5141


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


12

Sliding door bottom profiles

Art. No. 5119.05.2010 PU 150 pcs

Art. No. 5119.05.2500 PU 150 pcs




Art. No. 5329.05.2010

Art. No. 5329.05.2500




Rabate profiles

Art. No. 5050.05.2010 PU 140 pcs

Art. No. 5050.05.2500 PU 140 pcs




Art. No. 5080.05.2010 PU 210 pcs

Art. No. 5080.05.2500 PU 210 pcs





Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


13

Magnetic door seals

Art. No. 6042.11.2010 PU 70 pcs

Art. No. 6042.11.2500 PU 70 pcs




Magnet coating: light grey

Art. No. 6042.11.2010 or 2500

Art. No. 6092.11.2010 or 2500

Profile set for swing door.

Art. No. 6052.11.2010 PU 136 pcs

Art. No. 6052.11.2500 PU 136 pcs





Art. No. 6062.11.2010 PU 136 pcs

Art. No. 6062.11.2500 PU 136 pcs





135 ° Set

Art. No. 6052.11.2010 or 2500

Art. No. 6062.11.2010 or 2500

Magnetic door seals

Art. No. 6072.11.2010 PU 119 pcs

Art. No. 6072.11.2200 PU 119 pcs

Art. No. 6072.11.2500 PU 56 Stück





Art. No. 6082.11.2010 PU 119 pcs

Art. No. 6082.11.2200 PU 119 pcs

Art. No. 6082.11.2500 PU 56 pcs





180° Set

2 x Art. No. 6072.11. xxxx or

2 x Art. No. 6082.11. xxxx

90° Set

Art. No. 6072.11.xxxx + 6082.11.xxxx


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


14

Magnetic door seals

Art. No. 6092.11.2010 PU 150 Stück

Art. No. 6092.11.2200 PU 150 Stück

Art. No. 6092.11.2500 PU 70 Stück

180 ° Set

2 x Art. No. 6092.11.xxxx





Profile set

Art. No. 5224.05.2550 +

Art. No. 6042.11.2010 or 2500 +

Art. No. 6092.11.2010 or 2500

duct tape

Art. No. 5224.05.2550



Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


15

3.3 PROFILES WITH 13 – 15 MM OVERLAP FOR 8-10 MM ESG*

Rabate profile

Art. No. 5750.05.2500 PU 108 Stück

Attention: only for 8-10 mm thick ESG




Art. No. 5780.05.2500 PU 60 pcs

Attention: only for 8-10 mm thick ESG






Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


16

3.4 PROFILE WITH 12 MM OVERLAP FOR 10-12 MM ESG*

Lip seals

Art. No.101291.15.2500 PU 78 Stück




Art. Nr.101219.15.2500




Lip seals with central lip

Art. Nr.101220.15.2500




Soft nose seal

Art. No.101202.15.2500 PU 64 pcs




Gab seal

Art. No.101241.15.2500 PU 54 pcs




Art. No. 5150.05.2500 PU 126 pcs

Attention: 6 mm overlap for only for 10 mm thick ESG





Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


17

Magnetic door seals

Art. No.101272.11.2500 PU 42 pcs





Art. Nr.101282.11.2500 PU 42 pcs





180° Set

2 x Art. Nr. 101272.11.2500 or

2 x Art. Nr. 101282.11.2500

90° Set

Art.Nr.101272.11.2500+101282.11.2500

Magnetic door seals

Art. No.101292.11.2500 PU 60 pcs





180° Set

2 x Art .No. 101292.11.2500

135° Set

Art.Nr.101272.11.2500+101292.11.2500


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


18

3.5 TUB SEALS, SQUARE & ANGLE PROFILES AND TOOLS

Tub seals

Art. Nr. 8001.11.2010 VE 10 Stück

PMMA extruded, crystal clear

Art. Nr. 8010.11.2010 VE 5 Stück


Aluminium-Seals

Art. No. 8300.10.2410 white

Art. No. 8300.20.2410 satin anodized

Art. No. 8300.30.2410 chrome effect

Art. No. 8300.33.2500 brass effect

Set: include end caps L+R and angle 90°

Art. Nr. 8301.10.0000 PVC white

Art. Nr. 8303.30.0000 PVC chrome effect

Square & angle profiles

Art. No. 8090.11.2010 (L = 6-6 mm)

Art. No. 8100.11.2010 (L = 8-8 mm)

Art. No. 8110.11.2010 (L = 10-10 mm)


Art. No. 8070.11.2010 (L 10-10-2)

Art. No. 8080.11.2010 (L 15-15-3)

Art. No. 8120.11.2010 (L 20-20-2)


Tools

Art. Nr. 8700.300.0001 Art. Nr. 8600.00.0001


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


19

3.6 BRUSH SEAL PROFILE WITH 12 MM OVERLAP FOR 8 MM AND 10 MM GLASS

The brush seal profiles consist of a piping profile made of polycarbonate (PC) in a clear

transparent color and a retractable brush seal in gray made of polypropylene (PP). We retract

the brushes, fix them in place with an adhesive dot, and pack them individually in tubular

bags.

Brush seal Profiles

Brush Seal Profile for 8 mm Glass

Art. Nr. 084261.06.2500 with brush seal 06 mm




Art. Nr. 084261.25,2500 with brush seal 25 mm

Bush Seal Profile for 10 mm Glass





Art. Nr. 104261.25,2500 with brush seal 25 mm


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


20

4. SPECIAL PROGRAM

Our special program includes seal profiles for 4,8 – 5 mm and 6 mm thick ESG. Due to the low demand

and stockpiling, the profiles are only available on request. Each profile can be made exclusive by

request. Please do not hesitate to contact us if you need further information about minimum production,

price etc.

4.1 PROFILES WITH 12 MM OVERLAP FOR 4,8-5 MM THICK ESG*

Lip seals

Art. No. 48501.15.2010 PU 240 pcs

Art. No. 48510.15.2010 PU 143 pcs







Vertical sliding door profiles

Art. No. 48511.15.2010 PU 240 pcs




Soft nose seal

Art. No. 48513.15.2010 PU 192 pcs




Water deflector

Art. No. 48542.15.2010 PU 153 pcs




Art. No. 48505.15.2010 PU 80 pcs






Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


21

Lip seals

Art. No. 48501.15.2010 PU 240 pcs

Art. No. 48510.15.2010 PU 143 pcs







Vertical sliding door profiles

Art. No. 48511.15.2010 PU 240 pcs




Soft nose seal

Art. No. 48513.15.2010 PU 192 pcs




Water deflector

Art. No. 48542.15.2010 PU 153 pcs




Art. No. 48505.15.2010 PU 80 pcs





Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


22

4.2 PROFILES WITH 5 MM OVERLAP FOR 6 MM ESG*

Lip seal

Soft nose seal

Art. No. 5006.05.2010 PU 504 pcs




Water deflector

Art. No. 5046.05.2500 PU 330 pcs




Gab seal

Art. No. 5106.05.2010 PU 99 Stück




Art. No. 5120.05.2010 PU 189 pcs

Art. No. 5120.05.2500 PU 189 pcs




Magnetic door seals

Art. No. 6076.02.2010 PU 190 pcs

Art. No. 6076.02.2500 PU 190 pcs





Art. No. 6086.02.2010 PU 190 pcs

Art. No. 6086.02.2500 PU 190 pcs






Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


23

5. SVHC DUTIES TO COMMUNICATE INFORMATION (REACH)

EU Chemicals Regulation REACH

With reference to the Regulation (EG) 1907/2006 (REACH) our suppliers have taken all

necessary measures to meet the requirements.

a) Preregistration and registration of substances

Our suppliers exclusively uses registered or preregistered raw materials and continuously

verifies the registration status of the raw materials in use.

b) SVHC duties to communicate information.

The candidate list dd. 5 November 2025, which can be found on the ECHA homepage,

contains a total of 251 “substances of very high concern” (=” SVHC”) for which there is a

duty to communicate information from a content of more than 0.1% acc. to Article 33 of the

REACH regulation. This is to inform you that the articles we offer:

Article No.

005001.15.2010

005001.15.2500

005006.05.2010

005011.15.2010

005011.15.2500

005021.15.2010

005021.15.2500

005038.15.2010

005038.15.2500

005042.15.2010

005042.15.2200

005042.15.2500

005046.05.2500

005050.05.2010

005050.05.2500

SVHC DUTIES TO COMMUNICATE INFORMATION (REACH Article 33):

Article contain more than 0.1%:

2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate*

























Article does not contain more than 0,1% of any “substances of very high concern”

(=” SVHC”) stated in the current candidate list.




Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


24

Article No.

005071.15.2010

005071.15.2500

005080.05.2010

005080.05.2010

005080.05.2500

005091.15.2500

005101.05.0135

005101.05.0500

005101.05.0550

005101.05.2010

005101.05.2500

005101.05.2010

005101.05.2500

005102.05.0135

005102.05.0500

005102.05.0550

005102.05.2010

005102.05.2500

005104.05.2050

005106.05.2010

005108.15.2200

005111.05.2010

005111.05.2500

005112.15.2010

005112.15.2500

005118.15.2200























































Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


25

Article No.

005119.05.2010

005119.05.2500

005120.05.2010

005120.05.2500

005121.05.2010

005121.05.2500

005122.05.2010

005122.05.2500

005130.05.2010

005130.05.2500

005141.15.0500

005141.15.0550

005141.15.2010

005141.15.2500

005148.15.2030

005148.15.2500

005150.05.2500

005160.15.2010

005211.15.2500

005224.05.2550

005240.15.2010

005325.05.2010

005325.05.2500

005329.05.2010

005329.05.2500

005750.05.2500




























Artikel enthält mehr als 0,1%:

2-ethylhexyl10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate*


























Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


26

Article No.

005780.05.2500

006042.11.2010

006042.11.2500

006052.11.2010

006052.11.2500

006062.11.2010

006062.11.2500

006072.11.2010

006072.11.2200

006072.11.2500

006076.02.2010

006076.02.2500

006078.12.2500

006082.11.2010

006082.11.2200

006082.11.2500

006086.02.2010

006086.02.2500

006088.12.2500

006092.11.2010

006092.11.2200

006092.11.2500

006098.12.2500

008001.11.2010

008010.11.2010

008070.11.2010

008080.11.2010

























































Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


27

Article No.

008090.11.2010

008100.11.2010

008110.11.2010

008120.11.2010

008140.01.0001

008300.10.2500

008300.20.2500

008300.30.2500

008300.33.2500

008301.10.0000

008303.30.0000

008600.30.0001

008700.30.0001

048501.15.2010

048502.15.2010

048505.15.2010

048510.15.2010

048511.15.2010

048512.15.2010

048513.15.2010

048542.15.2010

048575.11.2010

048585.11.2010

048592.11.2010

101219.15.2500

101202.15.2500























































Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


28

Article No.

101202.15.2500

101220.15.2500

101241.15.2500

101272.11.2500

101282.11.2500

101291.15.2500

101292.11.2500

084261.06.2500

084261.11.2500

084261.15.2500

084261.20.2500

084261.25.2500

104261.06.2500

104261.11.2500

104261.15.2500

104261.20.2500

104261.25.2500





























(=” SVHC”) stated in the current candidate list.sind







*It is not necessary to take any particular precautionary measures when dealing with

these articles as the substance is bound in the polymeric matrix and is not released in

hazardous quantities when being used acc. to regulations.

REACH contacts

For specific questions on the REACH topic the employees of our sales offices through which

you normally handle your orders are primarily available. Questions that cannot be replied by

them will be forwarded internally to specialists.


Tel. +49 (0) 52 06 / 91 81 - 720 Fax +49 (0) 52 06 / 91 81 - 726


TG Industriedienstleistungen GmbH profiles overview incl

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?