SleepTech Kasım Aralık 2025

November - December 2025

FROM RECYCLED FOAM

TO RETAIL SHELF

C

O

N

T

E

N

T

S

Contents

6 En route to Moscow...

8 Nespon Makina showcased Turkish

engineering and industrial resilience at

IBIA Expo 2025

10 Dual-action bed hinges improve ease

of use and durability

14 Fully automated mattress production

lines bring speed and flexibility

revolution

18 Smart mattress sensors enable

advanced sleep analysis

24 Water-based adhesives revolutionize

mattress manufacturing: safer, greener,

and efficient

28 Needle punching technology achieves

new level of speed and uniformity

32 Next-gen pocket springs enhance

support and durability in modern

mattresses

36 IBIA Expo 2025 becomes the global

meeting point for the mattress supply

industry

46 BIFAS opens the door to a new era

in sleep technologies with Ibia Expo

2025

50 Facility visits conducted after

IBIA Expo 2025

54 Preparations begin for IBIA EXPO

2026: The heart of the bedding

industry beats again in Istanbul

58 Akkoza Dokuma: Production success

strengthened by trade fairs

59 Elektroteks crowns its export success

with new awards

62 Bedcovers: The name of quality,

innovation, and trust in bedding textiles

64 Erplast stood out at IBIA Expo 2025

with 27 years of experience in the

packaging industry

65 Feltturc & Kaliteks

highlighted 21

years of experience

in mattress

components at IBIA

Expo 2025

66 Baknoteks aims

for technology

and sustainable

growth in nonwoven

production

67 Apex Adhesive: A

global power in bonding solutions

68 Feryal Group strengthens its position in

the bedding accessories market at

IBIA Expo 2025

70 Metal Matris highlighted Turkish

engineering and export strength at

IBIA Expo 2025

72 Aydın Mattress Ticking: A global brand

growing through innovation

76 Askom Tekstil: A success story built on

handcraftsmanship and vision

80 Akdemir Group marks its global

presence in spring unit roll pack

machinery

84 Can Kimya: Half a century of trust in

hot-melt adhesive production

85 Galanthus makes a mark at IBIA Expo

2025 with Dolphin Pack representation

in the polyurethane sector

86 Polya Yatak stood out at IBIA Expo

2025 with its export vision and strong

production capacity

87 Yaskawa makes its debut at IBIA

Expo 2025: The power of Japanese

engineering in robotics arrives in

Türkiye

88 Sinova Bedding debuts in Türkiye with

innovative mechanisms at IBIA Expo

2025

92 Özdemir Malzemecilik stood out at

IBIA Expo 2025 with its innovative

production and export power

93 Özay Group became the voice of the

industry at IBIA Expo 2025: “This fair

must live on”

94 Dorutech stands out as the address

of quality and reliability in technical

textiles at IBIA Expo 2025

95 Elifoğlu Plastik becomes the symbol

of quality and trust in furniture

accessories with 30 years of

experience

96 Rubateks stood out at IBIA Expo 2025

with its innovative production strength

and export vision

97 D-Label showcased quality and

ınnovation in mattress labeling at

IBIA Expo 2025

98 Hybrid foam technologies minimize

pressure points in mattresses

104 Marsteks showcased Turkish quality

and strong production power at

IBIA Expo 2025

INDEX ADS

Boyçelik...............................................Front cover

Boyteks................................................Back cover

Form Sünger..................................Front cover ear

Elektroteks................................. Inside front cover

Boyçelik.....................................Inside back cover

Comfytex......................................................... 2-3

Kimyapsan...........................................................5

Özen İplik.............................................................7

India Mattress Tech.............................................9

Nespon......................................................... 12-13

Bella Yay.......................................................16-17

Kangaroo...........................................................19

Feltturc...............................................................21

Fasmac........................................................ 22-23

Gemba......................................................... 26-27

Dellsa Kimya................................................ 30-31

BRN............................................................. 34-35

Giz Grup...................................................... 42-43

Tefa Makina................................................. 44-45

Ural Medikal................................................. 48-49

Ibia 2026............................................................53

Starfelt......................................................... 56-57

Doqu Home................................................. 60-61

Nano Yay...........................................................71

Marsala.........................................................74-75

Bed Cover.................................................... 78-79

Marsteks...................................................... 82-83

Interzum.............................................................89

EDR............................................................. 90-91

Kırayteks...................................................102-103

4 SleepTech • November - December

Editor

En route to Moscow...

As we close out another dynamic year for

the global bedding and sleep technologies

sector, I am pleased to present to you the

latest issue of Sleep Tech Magazine. Our

previous edition accompanied us to IBIA

Expo Istanbul, where we had a strong

and engaging presence. It was a pleasure

to meet many of you at our stand, share

complimentary copies, and cover the fair

with the professionalism and depth that our

industry deserves.

Now, with this new issue in hand, we are

taking our place at Mebel Expo Moscow—a key meeting point for

the furniture and sleep products world. As always, we are committed

to bringing you the most relevant insights, innovative products, and

industry developments straight from the exhibition floor.

This edition also marks the final issue of the year—a moment to

reflect on the progress we’ve made and the momentum we’ve built.

Looking ahead, we are preparing for an even more active calendar.

In the coming year, we will continue to track and report on all major

international events, from China to America, supporting the exporters

who drive our industry forward.

Thank you for joining us on this journey. Your readership motivates us

to push boundaries, expand our coverage, and keep you informed

about every major development in the global sleep technologies

market.

Wishing you a productive close to the year and an energetic start to

the next.

Publisher

ISTMAG

Magazin Gazetecilik Yayıncılık

İç ve Dış Ticaret Ltd. Şti.

Adına sahibi

H. Ferruh IŞIK

Managing Editor

(Responsible)

Mehmet SOZTUTAN

(mehmet.soztutan@img.com.tr)

Editorial Consultants

Assoc. Prof. Mehmet Ali OZBUDUN

Recep SAHIN

Omer Faruk GORUN

İsmail CAKIR

Advertising Sales Manager

Omer Faruk GORUN

(omer.gorun@img.com.tr)

T: +90 224 211 44 50-51

M: +90 505 299 62 65

Foreign Relations Manager.

Ayca SARIOGLU

(ayca.sarioglu@img.com.tr)

Art Director

Serkan BEYOGLU

(serkan.beyoglu@img.com.tr)

Technical Manager

Tayfun AYDIN

(tayfun.aydin@img.com.tr)

Web Developer

Emre YENER

(emre.yener@img.com.tr)

Finance Manager

Yusuf DEMIRKAZIK

(yusuf.demirkazik@img.com.tr)

Subscription

Ismail OZCELIK

(ismail.ozcelik@img.com.tr)

HEAD OFFICE

IHLAS MEDIA CENTER

Merkez Mah. 29 Ekim Cad. No:11 Medya

Blok Kat:1 34197 Yenibosna

İstanbul / Turkey

Tel: +90 212 454 22 22

Faks: +90 212 454 22 93

Editor

Mehmet SÖZTUTAN

mehmet.soztutan@img.com.tr

Mehmet Soztutan

LIAISON OFFICE: BURSA

Buttim Plaza A. Blok Kat:4 No:1038

Osmangazi / Bursa

Tel: +90 224 211 44 50-51

Fax: +90 224 211 44 81

PRINTED BY

IHLAS GAZETECILIK A.Ş.

Merkez Mahallesi 29 Ekim Caddesi İhlas

Plaza No:11 A/41

Yenibosna-Bahçelievler/ISTANBUL

Tel: 0212 454 30 00


Profile

Nespon Makina showcased Turkish

engineering and industrial resilience at IBIA

Expo 2025

Nespon Makina made a strong impression at IBIA Expo 2025, standing

out with its expertise in mattress and bedding machinery production.

The company emphasized its dedication to quality, technology, and

sustainable growth while strengthening its international presence

under its renewed brand identity.

Company owner Ahmet

Yasin Büyükkeçeci stated

that this was the first time

Nespon participated in IBIA under

its new brand, following its earlier

attendance in 2022 with a different

corporate name. “So far, the fair

has exceeded our expectations in

terms of quality visitors. Instead of

crowded traffic, we’re seeing real

buyers and long-term business

partners. We’ve already completed

several trade agreements here and

initiated promising negotiations,” he

said.

Strong participation and new

connections

IBIA Expo 2025 once again

served as a valuable platform for

manufacturers and international

buyers. Büyükkeşeci noted that the

fair allowed them to hold productive

meetings with both domestic

and foreign clients, adding, “Our

dialogues with customers from the

Arab region—especially Egypt and

Saudi Arabia—as well as from Africa,

India, and Russia were very fruitful.

We also had meaningful discussions

with visitors from

Albania and Kosovo in

Europe.”

The importance of

global fairs

Highlighting the

significance of

international events,

Büyükkeşeci said,

“If we want to grow

globally, fairs are

essential. They provide

visibility and credibility.”

Although the company

hasn’t yet attended

other global fairs,

plans are underway to

participate in Interzum

and similar events in the

near future.

Industry outlook and

2026 projections

Assessing the current market,

Büyükkeşeci emphasized that the

global economy is facing a period

of contraction affecting multiple

sectors. However, he expressed

optimism about the future: “As

manufacturers, we believe that

with disciplined work, 2026 will

mark the beginning of recovery.

The slowdown can’t last forever—

markets will reopen, and demand

will rise sharply across all industries,”

he said.

A message to the industry

Büyükkeşeci also shared a clear

message for Turkish producers:

“We must represent our country

with quality and commitment. Price

matters, but performance and

quality matter more. When these

values are prioritized, price becomes

a secondary concern for any serious

customer.”

With its innovative production

approach, strong service network,

and focus on performance-based

quality, Nespon Makina continues

to position itself as one of Türkiye’s

rising industrial brands in the

mattress machinery sector.


Bangalore International Exhibition

Centre (BIEC), Bengaluru, India

MACHINERY | FABRIC | FOAM | ADHESIVE | COMPONENTS | PACKAGING SOLUTIONS

Mariam Jan

M: +91 76191 63080

E: mariam.jan@nm-india.com

Anand Vivarekar

M: +91 98332 67675

E: anand.vivarekar@nm-india.com

Supporting Associations: Media Partner: Co-located with:

th

10 International Trade Fair for Mattress and Upholstery

Production Technology, Machinery and Supplies

News

Dual-action bed hinges

improve ease of use and

durability

Durable metal alloys and quiet operation mechanisms make

them stand out.

In the bedding industry,

durability and smooth

operation are two of the

most important features for

storage bed bases and folding

mechanisms. Dual-action bed

hinges address both needs,

providing an easy-open, easyclose

experience for users while

extending the overall lifespan of

the base.

Engineered for strength and

longevity

High-quality dual-action hinges

are typically made from reinforced

steel or aluminum alloys, offering

exceptional resistance to bending

and wear over time. Their

design distributes weight evenly,

reducing stress on individual

parts and preventing premature

failure. Many models undergo

rigorous fatigue testing to ensure


it accessible for elderly users or

those with limited mobility.

Added value for manufacturers

For furniture makers,

incorporating high-quality dualaction

hinges not only increases

the product’s longevity but also

enhances customer satisfaction,

reducing the likelihood of returns

or complaints. With the rising

popularity of storage beds in both

domestic and export markets,

this hardware is becoming an

essential component in premium

bed designs.

they can withstand thousands of

open-close cycles without loss of

performance.

Smooth, silent operation

One of the defining features

of modern dual-action hinges

is their noise-free movement.

Precision-engineered

components, combined with

silent gas springs or dampening

systems, allow the bed base

to be lifted or lowered without

jerks or creaks. This is especially

appreciated in compact living

spaces where noise can be a

concern.

User-friendly design

Dual-action hinges are designed

to work for users of different

ages and physical strengths.

The balanced lift mechanism

minimizes the force required to

open or close the base, making

SleepTech • November - December

11

News

Fully automated mattress

production lines bring speed

and flexibility revolution

Next-gen machines enable one-touch transitions between different

mattress models.

The mattress manufacturing

sector is experiencing a

major shift as fully automated

production lines redefine speed,

flexibility, and efficiency. Designed

for seamless integration, these

advanced systems allow

manufacturers to switch from

producing one mattress model to

another at the touch of a button,

eliminating lengthy reconfiguration

times and reducing production

bottlenecks.

Integrated modules for

faster output

One of the most significant

advantages of these production

lines is their modular architecture.

Integrated cutting, sewing,

assembly, and packaging units

work in harmony, enabling

continuous operation without

manual intervention. Automated

fabric spreaders, CNC foam

cutters, robotic sewing arms,

and conveyor-based assembly

stations work together in a

synchronized flow, reducing

overall production time by up

to 40% compared to traditional

semi-automated setups.

High flexibility for diverse

product ranges

Consumer demand for

customization has driven the need

for production flexibility. Advanced

control software allows operators

to pre-program multiple product

specifications—including mattress

dimensions, layer compositions,

and fabric designs—into the

system. Switching between

models requires no mechanical

adjustments, meaning a factory

can produce luxury hybrid

mattresses, memory foam

models, and budget-friendly

spring units within the same shift.

Improved quality control and

consistency

Automation minimizes the

variability caused by manual

handling. Vision inspection

systems and AI-driven quality

control modules monitor each

stage of production in real-time,

ensuring precise stitching, uniform

foam density, and accurate

edge support assembly. These

checks reduce the rate of defects

and ensure that every mattress

leaving the line meets strict quality

standards.


Energy efficiency and

cost savings

Modern fully automated lines

are equipped with energysaving

drives, optimized motor

controls, and regenerative

braking systems on conveyor

modules. The result is reduced

electricity consumption, lower

operational costs, and a

smaller environmental footprint.

Predictive maintenance alerts

further reduce downtime,

ensuring uninterrupted

production cycles.

Future-ready manufacturing

With global competition

intensifying, mattress producers

adopting fully automated systems

gain a significant competitive

edge. The combination of rapid

changeovers, consistent quality,

and reduced labor requirements

positions these manufacturers

to meet evolving consumer

preferences while maintaining

cost efficiency. Analysts predict

that the adoption rate of such

lines will grow rapidly over the

next five years, particularly in

export-oriented factories.

By merging cutting-edge

robotics, intelligent software,

and modular engineering, fully

automated mattress production

lines are transforming the

industry into a faster, more

adaptable, and more profitable

space for manufacturers

worldwide.


15

News

Smart mattress sensors enable

advanced sleep analysis

Built-in sensors collect sleep data and provide personalized

recommendations.

The integration of smart

sensors into mattresses

is redefining how people

understand and improve their

sleep. By embedding advanced

monitoring technology directly into

the sleep surface, manufacturers

are creating mattresses that do

far more than offer comfort—they

become active participants in

promoting better rest and overall

wellness.

How it works

Smart mattresses are equipped

with a variety of embedded

sensors, typically including

pressure sensors, motion

detectors, temperature sensors,

and sometimes even biometric

trackers for heart rate and

breathing patterns. These

sensors continuously collect data

throughout the night, tracking

factors such as sleep duration,

sleep stages, restlessness, and

environmental conditions like

temperature and humidity.

Data-driven sleep improvement

The collected data is transmitted

in real time to a companion


News

mobile application or a cloudbased

platform. Here, algorithms

analyze the information to generate

personalized sleep reports, often

accompanied by actionable

recommendations. For example,

the system might suggest

adjusting room temperature,

modifying bedtime routines, or

improving mattress firmness

to optimize sleep quality. This

feedback loop allows users to

make informed decisions about

their sleep environment and habits.

Integration with smart home and

wellness ecosystems

Many smart mattress systems are

designed to integrate seamlessly

with other smart home devices

and health platforms. This means

a mattress can signal a thermostat

to adjust the temperature, sync

with a smart lighting system to

simulate sunrise, or share sleep

data with a wearable fitness

tracker for a complete view of daily

health. Such integrations transform

the bedroom into a coordinated

wellness space tailored to the

user’s needs.

Applications beyond the home

While consumer use is the primary

market, smart mattress sensor

technology is finding valuable

applications in healthcare, elder

care, and hospitality. In medical

settings, these mattresses can

monitor patients’ movement

patterns to prevent bedsores

or track recovery progress. In

elder care facilities, they can alert

caregivers if a resident has been

out of bed for an extended period.

In the hospitality industry, premium

hotels use the technology to

offer guests a personalized and

luxurious sleep experience.

Privacy and data security

considerations

Because sleep sensors gather

sensitive biometric information,

privacy and data security are

essential. Leading manufacturers

are investing in encrypted data

transmission, secure cloud

storage, and transparent privacy

policies to reassure users that

their personal information is

protected.

The future of sleep technology

As artificial intelligence and

machine learning become more

advanced, smart mattress

systems will be able to make

even more precise and predictive

recommendations. Future models

could adapt in real time—

automatically adjusting firmness,

elevation, or temperature based

on ongoing sensor readings. This

level of responsiveness could

significantly improve sleep quality

and overall health outcomes.

Smart mattress sensors

represent the next step in

the evolution of bedding.

By combining comfort with

advanced monitoring and

personalized insights, they offer

a powerful tool for improving

both nightly rest and long-term

wellness.


News

Water-based adhesives

revolutionize mattress

manufacturing: safer, greener,

and efficient

Eco-conscious water-based adhesives offer low-VOC, high-bonding

solutions, streamlining production—especially for bed-in-box models.

The mattress industry is

undergoing a vital shift

toward sustainability—

and water-based adhesives

are at the forefront. These

adhesives are gaining rapid

traction thanks to their low

volatile organic compounds

(VOCs), strong bonding

capabilities, and compatibility

with automated, fast-paced

production lines. Leading

industry insiders describe

water-based formulations as “a

key advancement in mattress

manufacturing,” offering quality

without compromise.

Eco-friendly bonding with high

performance

Historically, solvent-based

adhesives were the go-to for

fastening diverse mattress

materials. However, they carry

hidden costs: high VOC emissions,

strict ventilation requirements,

and safety concerns for workers.

In contrast, modern water-based

adhesives significantly reduce

these risks. New formulations can

now match the bond strength

of solvent-based options while

eliminating harmful emissions.

Production speed meets

sustainability

One of the main challenges

previously limiting water-based

adhesive adoption was long

drying times, potentially leading

to supply chain bottlenecks and

even mold growth due to trapped

moisture. Fortunately, forced

curing technologies—such as

infrared drying—have transformed


the landscape. Manufacturers can

now apply, cure, and roll-pack

mattresses literally within minutes,

eliminating delays and preserving

product integrity.

Tailored solutions for modern

fabrication

Leading adhesive

suppliers such

as SABA offer

specialized

water-based

solutions

designed for

automated

assembly lines.

Their “Produce &

Pack” system integrates

forced drying steps so

mattresses can be sealed

and packed immediately after

bonding—perfect for the exploding

“bed-in-box” market.

Similarly, companies like Chemique

Adhesives deliver hightack waterbased

formulations suitable for

rollercoat applications. These

reduce coating weight and speed

up drying, seamlessly aligning

with both manual and automated

production workflows.

Market trends: growth powered

by sustainability

The global mattress adhesives

market is booming. Forecasts

predict a Compound Annual

Growth Rate (CAGR) of about 7%

from 2025 to 2032, expanding

from $3 billion in 2024 to over

$5 billion by 2032. This surge

isn’t just volume-driven—it’s

values-driven. Consumers

and manufacturers alike are

demanding eco-friendly, highperformance

options. Water-based

adhesives align with this shift and

are particularly popular in Asia-

Pacific, where industrial growth

and environmental awareness are

both accelerating.

Meanwhile, a broader industry

trend shows emerging innovations

in low-VOC, eco-friendly

adhesive chemistry, further

reinforcing this

directional

shift.

Why the industry is

embracing this change

Worker and consumer

safety: Reduced VOCs ensure

safer production environments and

end products.

Production efficiency: With

high-bond strength and rapid

curing, water-based adhesives

help maintain high throughput.

Environmental impact: Lower

emissions and cleaner chemistry

reinforce circular economy goals.

Market differentiation: Offering

greener manufacturing practices

can elevate brand appeal amid

eco-conscious consumers.

Future

outlook:

continuous innovation ahead

Looking forward, advancements

continue to emerge. Water-based

adhesive systems are evolving

to include bio-based and hybrid

resin formulations, offering even

greener performance. Research

into waterborne polyurethanes

and other hybrid resins points to

increasing performance, versatility,

and environmental compatibility.

Producers who invest in these

cutting-edge adhesives today will

gain not just operational agility,

but a foothold in the future of

responsible, high-quality mattress

manufacturing.


25

News

Needle punching technology

achieves new level of speed

and uniformity

Next-generation machines deliver denser and more balanced needle

punching, enhancing felt quality for mattress manufacturing and

beyond.

Needle punching, a critical

step in the production

of nonwoven felts for

mattresses, furniture padding, and

various industrial applications, has

seen a significant leap forward

with the introduction of advanced

machinery designed for higher

speed, greater precision, and

superior consistency. These

innovations are transforming the

way filling and support layers are

manufactured, enabling producers

to meet growing demands for both

quality and efficiency.

Enhanced density and structural

integrity

In traditional needle punching,

variations in needle penetration

depth and spacing can lead to

uneven density, affecting the

performance and durability of

the finished product. The latest

generation of needle punching

machines addresses these

challenges by using high-precision

control systems that ensure

uniform penetration and spacing

across the entire width of the felt.

This results in a denser, more

evenly compacted structure

that maintains its shape and

resilience over time. For mattress

manufacturers, this means

more consistent comfort layers

and improved longevity of their

products.

Higher production speeds

without compromising quality

While quality is paramount,

productivity remains a major

concern for manufacturers

operating in competitive markets.

The new technology integrates

optimized drive systems,

automated fabric feeding, and

synchronized needle boards that

operate at higher strokes per

minute. This combination allows for

significant increases in production

throughput—sometimes exceeding

20% over previous-generation

machines—without sacrificing

the uniformity or strength of the

felt. Faster output means shorter

lead times, making it easier for

producers to respond to seasonal

peaks in demand or special project

deadlines.


Improved fiber blending and

sustainability benefits

Modern needle punching machines

also incorporate advanced fiber

handling capabilities, allowing

seamless blending of recycled

PET fibers, natural fibers such

as cotton or wool, and highperformance

synthetics. This

flexibility opens the door for

sustainable production strategies,

as manufacturers can increase the

proportion of recycled materials

without compromising product

performance. In an industry where

environmental responsibility is

gaining importance, the ability to

create eco-friendly felt products at

scale is a notable advantage.

Precision through digital

monitoring

Many of the new models feature

digital control panels and realtime

monitoring systems that

track production variables such

as needle wear, stroke frequency,

and fabric tension. Operators

can make instant adjustments,

minimizing downtime and ensuring

consistent product specifications.

Predictive maintenance alerts

also help extend machine life and

reduce the risk of unexpected

breakdowns.

Broader impact across

industries

While mattress production remains

a primary application, the benefits

of advanced needle punching

extend to upholstery, automotive

interiors, filtration media, and even

geotextiles. In all these sectors,

the improved speed and uniformity

lead to better-performing products,

lower material waste, and

increased production efficiency.

By combining cutting-edge

engineering with sustainabilityoriented

design, the latest

generation of needle punching

technology offers manufacturers a

way to stay ahead in competitive

markets while meeting modern

quality and environmental

standards. For mattress industry

stakeholders, it represents not

just a machinery upgrade, but a

strategic investment in product

excellence and operational

efficiency.


29

News

Next-gen pocket springs

enhance support and durability

in modern mattresses

Advanced pocket spring systems deliver tailored body support,

improved airflow, and extended mattress lifespan.

The mattress industry is

embracing a new wave of

innovation with the arrival

of next-generation pocket spring

systems designed for enhanced

comfort, breathability, and

durability. Unlike traditional opencoil

constructions, pocket springs

operate independently, responding

to the sleeper’s individual pressure

points for a more customized feel.

Manufacturers are now elevating

this concept with advanced coil

shapes, reinforced edge zones,

and sustainable steel production

methods that meet both comfort

and environmental goals.

Precision support for every

sleeper

One of the main

advantages

of

modern

pocket

spring

designs

is their

ability

to adapt

to different

body types and

sleeping positions.

By housing each coil in

a separate fabric pocket,

these systems reduce motion

transfer—meaning one partner’s

movement won’t disturb the

other. Advanced manufacturing

techniques have made it possible

to vary coil diameters and tensions

across different zones of the

mattress, offering softer support

for shoulders and firmer resistance

for hips and lower back. This

zoned approach ensures proper

spinal alignment, which experts

say is crucial for long-term sleep

health.

Breathability and

temperature regulation

Airflow is another area

where pocket spring

systems excel. The open

structure between springs

allows heat and moisture to

dissipate more easily than in

solid foam cores. Many new

designs pair pocket springs with

breathable comfort layers, such

as natural latex or cooling foams,

to further enhance temperature

regulation. This combination

provides a fresher, more

hygienic sleep environment—an

increasingly important selling point

for health-conscious consumers.


Built to last with sustainable

practices

Durability has long been a strength

of spring-based mattresses, and

next-gen designs push this even

further. High-tensile, heat-treated

steel extends the coil’s lifespan,

while reinforced edge systems

prevent sagging and maximize

usable sleep surface. In response

to the industry’s sustainability

push, several manufacturers have

shifted to recycled steel and ecofriendly

pocket fabrics, reducing

the environmental footprint without

compromising performance.

Some producers are also

implementing closed-loop

production systems, recycling

offcuts and reusing process water

to minimize waste. These green

initiatives are resonating with

consumers who value products

that support both personal

and planetary well-being.

A future-ready sleep

technology

Market analysts forecast

strong growth in the premium

pocket spring segment over

the next decade, driven

by consumer demand for

personalized comfort and

long-lasting value. As hybrid

mattresses combining

springs with foam or other

advanced materials continue

to gain traction, next-gen

pocket spring technology will

remain a core feature of highquality

designs.

By combining engineering

precision, material innovation,

and sustainability, these

advanced pocket spring

systems are setting a new

benchmark for sleep quality—

helping the industry meet

the modern sleeper’s call for

comfort without compromise.


33

News

IBIA Expo 2025 becomes the global meeting

point for the mattress supply industry

IBIA Expo 2025 brought together over 20,000 professionals from 92

countries in Istanbul, further strengthening the international position

of the mattress supply and technologies sector.

The fair opened its doors for

the fourth time

Positioned as Türkiye’s

strongest international showcase

in the field of mattress supply and

technologies, IBIA Expo 2025

was held for the fourth time at the

Istanbul Expo Center between

24–27 September. This year’s edition

once again brought leading brands

of the sector under one roof and

generated a high level of synergy.

The fair featured a broad range

of products from mattress, foam,

spring, wire, fabric, machinery

and accessories manufacturers.

With both its product diversity and

professional visitor profile, IBIA

Expo continued to carry Türkiye’s

manufacturing strength to global

markets. The innovative solutions

presented by exhibitors clearly

reflected the level that technologydriven

competition in the Sleep Tech

field has reached.

This year’s edition once again

confirmed that IBIA Expo has

become the reference point of the

mattress supply industry in the

wider Eurasian region, supported by

strong interest from both domestic

and international companies.

Opening ceremony brought

together the industry’s leading

figures

The opening ceremony of IBIA

Expo 2025 brought together key

representatives of the international

mattress supply ecosystem,

adding significant prestige to the

fair. Speakers delivered in-depth

assessments of the current state of

the industry, the global competitive

landscape and expectations for the

future.

The first opening speech was

delivered by Osman Güler, Chairman

of the Board of the International

Bedding Industry Association

(IBIA), who drew attention to the

rapidly evolving structure of the

global mattress supply industry.

Güler underlined that smart

components, sustainable materials

and automation-based production

systems have now become

standard worldwide. He highlighted

that Türkiye is assuming a strong

role in this transformation and

emphasized that IBIA Expo provides

a critical platform for achieving

these ambitions. He also expressed

IBIA’s commitment to continuing its

support for the fair.

The next speaker, Ümit Vural,

Chairman of the Board of BİFAŞ

Birleşik Fuar Yapım A.Ş., stated that

IBIA Expo is not just an event for

Türkiye, but a vital instrument for

the growth of international trade,

the development of new business

connections and the representation

of the sector on the global stage.

Vural noted that the increasing


diversity of visitors, the strength of

international purchasing delegations

and the quality of the exhibitor

profile at this year’s fair created

major opportunities for Turkish

manufacturers. He underlined

that IBIA Expo plays a key role

in positioning Türkiye as one of

the strongest supply bases in the

Eurasian region.

The third speaker, Tiago Temponi,

Market Surveillance Committee

Chairman at Associação Brasileira

da Indústria de Colchões (ABICOL),

focused on the importance of

sectoral cooperation between

Brazil and Türkiye. Temponi

pointed out that both countries are

among the leading global players

in mattress production and that

mutual cooperation offers significant

advantages for both sides. In an

increasingly competitive global

market, he stressed that international

gatherings such as Ibia Expo, which

bring together manufacturers and

buyers from different continents, are

crucial platforms for the future of the

industry.

The fourth address came from

Ahmet Güleç, Deputy Chairman

of the Turkish Exporters Assembly

(TİM), who highlighted that the rise in

Türkiye’s mattress supply exports is

underpinned by technology, quality

and effective promotion activities.

Emphasizing the major role of

specialized fairs in this success,

Güleç stated that manufacturers

need to continue investing in

digitalization and automation in

order to strengthen their competitive

position globally. He reaffirmed TİM’s

ongoing support for all stakeholders

in the sector.

The final speech at the opening

ceremony was delivered by Mehmet

Ali Kılıçkaya, Director General of

Exports at the Ministry of Trade of

the Republic of Türkiye. Kılıçkaya

provided a detailed overview of

Türkiye’s external trade strategy

and expectations for the sector.

He noted that mattress supply and

sleep technologies have become

important pillars of value-added

exports, and underlined that IBIA

Expo is one of the most significant

platforms for developing international

partnerships. Kılıçkaya stated that

Türkiye’s manufacturing power is

finding increasing recognition in global

markets with each passing year.

A powerful business platform for

industry professionals

Over the course of four days, the

fair served as an intense hub of

commercial interaction between

international purchasing delegations

and sector professionals. Contacts

established with buyers from

different markets strengthened

companies’ access to new

geographies.

Thanks to collaborations with

international associations such

as ABICOL, EBIA and ISPA, there

was a marked increase in foreign

procurement delegations. This

helped Turkish manufacturers

become more visible and accessible

in world markets.

The B2B meetings held throughout

the fair once again demonstrated

that IBIA Expo is not only a

showcase, but also a strategic

business development center where

international supply chains are

reinforced.

20,245 professional

visitors registered

A total of 20,245 professional visitors

attended this year’s fair.

Of these, 14,088 were domestic

and 6,157 were international sector

representatives.

The visitor breakdown clearly reveals


37

News

the focal points of interest in the

industry:

• 41% mattress manufacturers

• 24% component importers

• 21% sleep product importers

• 10% foreign trade companies and

distributors

• 4% press

The high share of mattress

manufacturers confirms that the

fair is a strong attraction point for

production-oriented companies.

Both local promotional activities and

international visibility significantly

contributed to widening the visitor

profile.

Visitors from 92 countries

This year, IBIA Expo once again

demonstrated its international

reach by hosting professionals

from 92 countries. Visitors from

strategic markets such as Russia,

the UAE, Saudi Arabia, Iraq, Libya

and Brazil met directly with Turkish

manufacturers, paving the way for

new business relationships.

The broad visitor network spanning

Europe, Asia, Africa and South

America shows that IBIA Expo has

evolved from a regional event into

an industry gathering with genuine

global impact.

Exhibitor numbers and

exhibition space grew

A total of 120 companies exhibited

at the fair this year.

Of these, 89 were domestic and 31

were international manufacturers.

• Exhibition space used by domestic

companies: 10,084 m²

• Exhibition space used by

international companies: 1,309 m²

The exhibitor profile distribution was

as follows:

• 79% supply industry and materials

• 21% machinery and technologies

This structure demonstrates a strong

representation on both the materials

and machinery sides. In particular,

interest in automation and efficiencyfocused

production systems

generated heavy visitor traffic at the

machinery stands.

Export-oriented

growth supported

IBIA Expo 2025 stood out as

one of the most important events

supporting export-driven growth for

Turkish companies. The intensity of

foreign procurement delegations and

the quality of meetings enabled firms

to establish new partnerships in a

wide range of markets.

These long-term international

contacts have directly contributed

to the sector’s external trade

volume and strengthened its global

positioning.

Dates announced for

IBIA Expo 2026

The next edition of the fair will once

again be held at the Istanbul Expo

Center, from 16–19 September

2026.

The “See You Next Year”

announcement has already created

excitement in the sector and

accelerated preparations for the

upcoming event.

One of the key platforms

of the sector

IBIA Expo 2025 exceeded

expectations in terms of visitor

numbers, exhibitor diversity and

international business volume.

Automation technologies, nextgeneration

components and highefficiency

production systems were

among the standout innovations at

the fair.

With professionals from 92

countries, 120 exhibitors and four

days of intensive B2B activity, IBIA

Expo once again proved itself to be

a genuine global trade hub.

Bringing together production

strength, technological innovation

and an export-driven vision,

IBIA Expo has firmly established

its position as one of the most

important platforms supporting the

international competitiveness of

Türkiye’s mattress supply industry.


News

BIFAS opens the door to a new era in sleep

technologies with Ibia Expo 2025

BIFAS’ Ibia Expo 2025 strengthened the global position of the sleep

technologies and bedding components industry with its focus on

automation, innovation and international trade potential.

BIFAS’ Ibia Expo 2025 marked

a fresh chapter for the

global sleep technologies

ecosystem. Held in Istanbul, the

event brought together leading

manufacturers, machinery producers

and international buyers, reinforcing

the sector’s momentum with its

strong emphasis on automation,

advanced components and highvalue

business connections.

The sector gathered its strength

in Istanbul

Organized between 24–27

September 2025 at the Istanbul

Expo Center, the 4th International

Bedding Sub-Industry and

Technologies Fair – Ibia Expo 2025

– drew significant attention with both

its exhibitor diversity and strong

visitor turnout. Bringing together

mattress, foam, fabric, spring,

wire, accessories and machinery

manufacturers, the fair stood out not

merely as a meeting point, but as a

commercial hub that elevated the

industry’s global competitiveness.

Throughout the four-day event,

B2B meetings, international

procurement delegations and

new product launches created a

dynamic atmosphere that addressed

the expectations of both Türkiyebased

manufacturers and global

industry professionals. In the sleep

technologies segment, the central

themes were automation, smart

components and high-efficiency

production systems.

Automation and transformation

at the core of Ibia Expo 2025

According to BIFAS Chairman

Ümit Vural, this year’s fair was

shaped around two main pillars: the

integration of robotic transformation

into the sector and the transition

toward full automation. He

emphasized that Türkiye’s bedding

sub-industry has strengthened its

global position not only through

production capacity but also through

rapid adoption of technology.

For the sleep ecosystem, these

insights underline a major point: a

mattress is no longer just a physical

comfort zone; it has evolved into

a technology-supported product

capable of enhancing personalized

sleep experiences. This expectation

drives a structural change from

production lines to end-user design.

Key highlights across the exhibition

halls included:

Smart bedding components:

Pressure-responsive layers,

advanced viscoelastic materials,

thermal-balancing gel structures and

modular systems designed to offer

personalized support.

Sustainable materials: Natural-fiber

fabrics, environmentally conscious

filling materials and recyclable

components.

Automated production solutions:

Fully automated mattress production

lines, automatic adhesive systems,

robotic cutting and high-capacity

packaging technologies.

These advancements not only

improve operational efficiency but

also raise quality benchmarks,

offering global competitiveness

across all product categories.

More than 20,000 professionals

visited the fair

According to the official fair

report, Ibia Expo 2025 welcomed

20,245 professional visitors,

including 14,088 domestic and

6,157 international buyers. The

fact that 41% of visitors were

mattress manufacturers created

a highly productive environment

for companies focusing on sleep

technology innovations.

The international profile once again

highlighted the event’s global reach.

Professionals from 92 countries

explored a wide spectrum of

technologies—from automation

systems to innovative components.

Among the most prominent visitor


groups were buyers from Russia,

the UAE, Saudi Arabia, Iraq, Libya

and Brazil. Their strong presence

translated into remarkable potential

for new partnerships and supplychain

opportunities for Turkish

manufacturers.

Exhibitor profile expanded,

machinery firms stood out

This year’s edition hosted 120

exhibitors in total: 89 domestic

and 31 international companies.

Domestic firms showcased

their products across 10,084

square meters, while international

participants exhibited in 1,309

square meters—together pushing

the fair’s scale beyond previous

years.

Exhibitor breakdown:

Sub-industry and materials: 79%

Machinery and technologies: 21%

The increased presence of

machinery manufacturers reaffirmed

the sector’s shift toward automationdriven

production. Fully automated

lines and high-capacity machinery

attracted considerable attention

throughout the event.

B2B programs boosted

commercial outcomes

One of the most impactful elements

of the 2025 edition was BIFAS’

strong procurement delegation

program. Supported by the Ministry

of Trade and various exporters’

associations, these programs

connected qualified buyers from

targeted markets with manufacturers

throughout the fair.

According to Vural, this system

not only supports new business

connections but also strengthens

companies’ export capabilities.

Furthermore, Ibia Expo’s status as

a “Certified International Domestic

Fair” enables exhibitors to receive

reimbursement for a portion of their

participation costs—an important

incentive particularly for SMEs aiming

to expand their global presence.

A strategic hub for the global

Sleep Tech sector

Türkiye’s rapid rise in mattress and

sleep-related technologies has

become increasingly visible with the

support of events like Ibia Expo. The

industry, which was valued at 1.5

billion USD in 2021, has surpassed

3 billion USD today. This significant

growth is driven by higher quality

standards, diversification of materials

and rapid adoption of automated

production systems.

For Turkish manufacturers, the fair

represents more than a showcase—

serving as a strategic gateway to

long-term international partnerships.

Vural notes that the fair contributes

at least 20% to the industry’s export

growth, with the potential to reach

35% through the right strategies.

From a Sleep Well perspective,

Ibia Expo also provides a unique

vantage point for observing how

emerging materials and smart

construction methods will influence

next-generation consumer products.

Many of the technologies introduced

this year are expected to shape

the foundations of 2026 sleep

collections.

Roadmap set for Ibia Expo 2026

Reinforcing its commitment to

continuity, BIFAS has already

announced the dates for the next

edition:

16–19 September 2026, Istanbul

Expo Center.

Key objectives for the 2026 fair

include:

Expanding international buyer

participation

Strengthening outreach in Africa,

Asia and South America

Supporting the industry’s target of 4

billion USD in turnover and 3 billion

USD in exports

Advancing technology-focused

product development

Encouraging full-automation

transitions across the sector

Ümit Vural’s message to the sector

was clear:

“The future will belong to

manufacturers who adapt to

technology.”

His view highlights the growing

importance of machinery

investments and innovative

component development in the

coming years.

Strong outcomes for the sleep

industry

Ibia Expo 2025 exceeded

expectations across the Sleep

Tech landscape. The strengthening

of international participation,

accelerating interest in machinery

technologies and heightened

demand for smart materials

collectively reflected the sector’s

upward global momentum.

For brands operating in the sleep

segment, the most significant

takeaway from this year’s fair

is the steady alignment around

high technology + high comfort +

sustainable production. These pillars

are set to influence not only product

development but also the strategic

direction of the industry over the

next several seasons.


47

News

Facility visits conducted after

IBIA Expo 2025

In Kayseri and Bursa, buyer delegations visited Boyteks, Aydın Tekstil,

Yataş, BRN, Comfytex, Elektroteks, Kırayteks, Nano Yay, Feltturc,

Boyçelik, Metal Matris, Form Sünger, Zeb Springs–Anadolu Boru,

Özdemir Malzemecilik, Beha Ambalaj and many more manufacturers.

The facility visit program

organized right after IBIA

Expo 2025 stood out as a

productive series that moved the

commercial momentum of the

show into the field, turning it into

concrete collaborations. Designed

to introduce the production strength

of Türkiye’s bedding sub-industry

and technologies to international

markets, the program offered buyer

delegations an on-site look at the

sector. The first stage covered

visits in Bursa and Kayseri, where

leading brands hosted delegations

at their plants, with energy efficiency,

automation, quality control and

the use of sustainable materials as

headline themes throughout.

Kayseri line: the entire production

chain was on site

In Kayseri, the delegation followed

an intensive schedule that covered

every link of bedding and subindustry

manufacturing. Facilities of

Yataş Grup (Oktay Karaca), Kar-As

(Önder Aslan), Kaliteks–Feltturc

(Mustafa Kiper), Zeb Springs (Emre

Karacabey), Anadolu Boru (Ersin

Karacabey), BRN Yatak (Berna

Gözbaşı), Comfytex (Ülkü Seyhan

Kılıç), Özdemir Malzemecilik (Şeref

Özdemir), Metal Matris (Zafer Baktır),

Form Sünger (Metin Uğur) and

Boyçelik (Serhat Duru) were visited.

Participants examined a wide

production spectrum on site, from

spring systems to felt, from foams

to pipe and packaging solutions,

and were briefed on traceability, fast

delivery and flexible manufacturing.

A highlight was Boyteks, which

presented its portfolio that

combines design, functionality

and sustainability in mattress

fabrics and technologies. Branded

solutions such as Magnerest,

Cooler, Graphene, Biorytmic Life,

Ametist and Nano Clean were

noted as concrete examples of

comfort-enhancing functional

surfaces. At Aydın Tekstil, the focus

was on smart fabrics, antibacterial

finishes and eco-minded material

choices. At Beha Ambalaj, the

contribution of protective films and

presentation-oriented packaging

systems to logistics efficiency

was discussed. The Kayseri tour

concluded with visits to Aydın Tekstil

(Abdulkadir Aytemur, Semiha Kutsal),


Boyteks (Aydın Aydın) and Beha

Plastik (Samet Beğendik), where

presentations provided actionable

insights for future roadmaps.

Bursa line: integrated production

and technology investments

In Bursa, the delegation visited

Kırayteks (Onur Kırayoglu), Nese

Kimya–Viscomavi (Ayfer Erdoğan),

Nano Yay (Serkan Kır) and

Elektroteks (Osman Güler).

Kırayteks drew attention with its

integrated setup uniting weaving,

knitting, dyeing, finishing and digital

printing under one roof, along with

collections tailored for international

markets. Viscomavi shared new

formulations and automation

capabilities in visco pillows and filling

materials. Nano Yay introduced new

spring solutions addressing different

durability and comfort profiles.

Elektroteks demonstrated the latest

updates in mattress manufacturing

machinery, quilting and sewing lines,

and efficiency-driven automation.

In delegation notes, the region’s

complementary chain in chemicals,

textiles and machinery was

summarized as “high scale, flexibility

and consistent quality.”

An international bridge with

ABICOL

A key dimension of the program

was the presence of an ABICOL

delegation from Brazil and

Argentina. Starting at Özay Group

(Lokman Özay), the team then

observed production lines at

Nese Kimya–Viscomavi, Nano

Yay, Elektroteks and Kırayteks.

The delegation received detailed

briefings on R&D, sustainable

materials, digital traceability and

automation solutions, and held talks

on potential collaborations and

reciprocal supply plans for Latin

American markets. Good practices

shared by participating companies

formed an initial framework for

joint benchmarking in quality

management and productivity.

Knowledge sharing and

sector synergy

Throughout the program,

manufacturers openly shared

their investments for 2026 and

beyond, innovation agendas and

export targets. On the factory floor,

delegates directly observed quality

assurance metrics, energy-saving

processes and steps in digital

transformation. Initial assessments

indicate that Türkiye continues

to stand out in the bedding subindustry

with engineering strength,

product diversity and supply

capability. New connections were

established that can contribute to an

export volume exceeding two billion

dollars. Many participants underlined

that such on-site programs

accelerate technology sharing and

collective learning domestically as

well as internationally.


51

News

Strong preparation for

IBIA EXPO 2026

According to officials, these facility

visits are not merely courtesy calls,

they form a strategic preparation

phase that strengthens technical

alignment and communication

ahead of IBIA EXPO 2026, to be

held on 16–19 September 2026

at Istanbul Expo Center. An initial

summary report emphasized that

the sector’s production diversity,

quality standards and sustainability

approach in Türkiye reinforced

confidence among international

buyers. As demonstrated across

the Kayseri and Bursa stages, when

production power is combined with

a strong culture of collaboration,

lasting value emerges for the

industry.

The post-IBIA Expo 2025 facility

visit program acted as a bridge

that brings together knowledge,

technology and trade. With

this strong field presence and

international outreach, Türkiye’s

bedding sub-industry is gearing

up for a broader cooperation and

investment agenda on the road to

2026.


News

Preparations begin for IBIA EXPO 2026:

The heart of the bedding industry beats

again in Istanbul

Leading brands of the sector are getting ready to meet at the Istanbul

Expo Center between September 16–19, 2026

Recognized as one of the

most influential events in the

bedding components and

technologies industry, IBIA EXPO

is preparing to open its doors for

the fifth time in 2026. Scheduled

for September 16–19, 2026, at

the Istanbul Expo Center (IFM), the

exhibition will bring together more

than 300 leading companies, over

22,000 professional visitors, and

buyers from 91 countries, making

it one of the most comprehensive

trade platforms for the global

bedding industry.

A strong platform for innovation,

exports, and global trade

IBIA EXPO 2026 will unite

all segments of the bedding

production supply chain under

one roof — from components and

machinery to chemicals, fabrics,

foams, springs, and automation

systems. The event will showcase

a wide range of innovations

including nonwoven materials,

industrial adhesives, packaging

solutions, and high-tech fabric

designs, offering a complete

perspective on the future of the

sleep industry.

Covering an exhibition area

exceeding 35,000 square meters,

the event aims to strengthen

Türkiye’s mattress export capacity

exceeding USD 2 billion. IBIA

EXPO will once again serve as

an essential hub for business

partnerships, export agreements,

and technological investments that

drive the global competitiveness of

Turkish manufacturers.

High commercial potential for

exhibitors and visitors

The exhibition will attract a diverse

visitor profile including mattress,

pillow, quilt, and upholstery

manufacturers, private label

producers, designers, retailers,

and distributors. For participants,

IBIA EXPO is not only a stage

to display products but also a

gateway to new markets and

distribution channels, offering

access to key decision-makers

across the world.

Following the remarkable success

of its previous editions, IBIA EXPO

2026 will feature international

buyer delegations, industry

seminars, and B2B meetings,

providing a dynamic environment

for professional growth and

sectoral collaboration.


Türkiye’s rise in the bedding

industry continues

Türkiye currently ranks as the

world’s second-largest supplier

in the bedding sub-industry.

With a production volume of

USD 408 million and strong

export momentum, the sector is

expanding its global reach through

IBIA EXPO 2026.

The fair is organized by Birleşik

Fuar Yapım A.Ş. (BİFAŞ) with

the support of the International

Bedding Industry Association

(IBIA), under the supervision of the

Ministry of Trade of the Republic of

Türkiye and TOBB.

Istanbul, the dynamic hub of

international exhibitions

Strategically located between

Europe, Asia, and the Middle East,

Istanbul once again becomes

the international showcase of the

bedding industry with IBIA EXPO

2026.

With its modern infrastructure,

accessibility, and extensive trade

network, the Istanbul Expo Center

offers an ideal meeting point for

both exhibitors and visitors.

More than just an exhibition of new

products, IBIA EXPO 2026 stands

out as a global business platform

shaping the future of the sleep and

bedding industry.


55

Profile

Akkoza Dokuma: Production success

strengthened by trade fairs

One of the most trusted brands in the industry, Akkoza Dokuma

continues to make Türkiye’s name known in global markets with its

innovative production approach.

Celebrating its 10th anniversary

in mattress and home textile

accessories manufacturing,

Akkoza Dokuma operates in

modern facilities in İzmir, offering a

wide range of products including

labels, elastics, tapes, handles,

spacer fabrics, and air capsules.

With its quality-oriented production

philosophy, the company has built a

strong reputation both domestically

and internationally.

Founded in 2015, Akkoza Dokuma

San. Tic. Ltd. Şti. has rapidly

become one of Türkiye’s leading

integrated accessory manufacturers.

Operating in a 2,000-squaremeter

facility with a team of about

40 experienced employees, the

company manages a production line

of nearly 150 machines. Founder

and owner Ali Dinamit, who has over

30 years of experience in the textile

sector, has guided the brand’s steady

growth: “I don’t know any other

profession than label making, so we

strive to do what we know best.”

A brand of quality and trust

Over the past decade, Akkoza

Dokuma has distinguished itself

not only with production quality but

also with its service approach. The

company supplies leading mattress

producers in Türkiye such as Yatsan,

Bambi, Alfomo, Comfort, İdaş and

İstikbal Group, setting itself apart

with a fully in-house production

structure. Dinamit notes: “We are

not a buy-and-sell company; every

product we offer is made by us.”

Having achieved remarkable export

growth in recent years, Akkoza

Dokuma now generates around

40 percent of its sales from foreign

markets. In addition to the Middle

East and Africa, the company has

expanded its collaborations in

Europe, further growing its customer

base in Western Europe following

its participation in trade fairs in

Germany.

Guided by trade fair experience

Believing that fairs are the most

effective way to connect with the

industry, Akkoza Dokuma has so far

participated in major events such as

IBIA Expo, Interzum Cologne and K

Fair in Germany. This year, Dinamit

attended IBIA Expo as a visitor

rather than an exhibitor: “There were

clear signs of economic slowdown,

so we decided not to invest in a

booth this year — and it turned out

to be the right decision. Holding

fairs every two years could be more

efficient for the sector.”

temporary phase: “During the

pandemic, everyone was at home —

beds were replaced, sofas renewed.

Now we are experiencing the natural

slowdown after that.”

He also emphasizes solidarity within

the industry: “Turkish companies

should support one another. When

a foreign customer visits, we should

recommend not only our own

products but also our partners —

fabric, foam, interlining suppliers.

With this confidence, we can all

succeed together.”

“May everyone receive the reward

for their efforts. We will continue to

produce, innovate and add value to

the industry.”

Ali Dinamit

Founder of Akkoza Dokuma

A journey dedicated to

unity and quality

Commenting on the post-pandemic

slowdown that followed a production

surge, Dinamit views this as a


Elektroteks crowns its export success

with new awards

Becoming a global brand in mattress production lines, Elektroteks

stands out with its advanced technology investments, R&D efforts, and

strong export performance.

Operating in a modern

production area of 55,000

square meters in Bursa,

Elektroteks represents Türkiye’s

industrial strength as one of the

world’s leading manufacturers of

mattress and foam production

lines. With production facilities in

countries such as Germany, the

United States, India, Bulgaria, and

Brazil, the company continues to

make a strong impression in the

global market with its innovative

technologies and engineering

solutions. Elektroteks has been

honored by the Machinery

Exporters’ Association (MAİB)

for ranking among the top five

exporters in the categories of textile

and apparel machinery and parts,

packaging machinery and parts,

and lifting and handling machinery.

This recognition adds another

achievement to the company’s

export milestones. The award

further reinforces Elektroteks’s

leadership in Türkiye’s machinery

industry while once again proving its

influence in global markets.

A global power with production

lines tailored for the bedding

industry

Elektroteks leads the development

of the bedding sector through its

fully automated machinery lines,

foam processing systems, and

smart automation solutions. The

high-capacity production lines

in its portfolio not only increase

efficiency in the mattress industry

but also raise overall quality

standards. With its high-tech

manufacturing infrastructure, the

company meets the needs of the

bedding industry not only in Türkiye

but all around the world.

Osman Güler, Chairman of Sayger

Automation Machinery, which

manages Elektroteks’s foreign

trade operations, emphasized

that export growth is more than

just an economic gain, saying,

“This success reflects the

strength of Turkish engineering

and demonstrates our nation’s

production power to the world.”

“Contributing to the national

economy is our main motivation”

Through exports to more than 140

countries, Elektroteks continues to

strengthen its vision of sustainable

growth. Güler noted, “Our goal

is to contribute to the national

economy and position Türkiye

among the leading countries

in technology. Our future plans

prioritize innovative production

models, energy efficiency, and

environmentally friendly solutions.”

The company’s investments

in R&D, intelligent control

software, Industry 4.0-compliant

systems, and energy-saving

production lines continue to

strengthen Elektroteks’s position

in global competition. Its

integrated solutions for mattress

manufacturers enhance both

performance and sustainability.

An exemplary success in

Türkiye’s machinery industry

As one of Türkiye’s leading

machinery exporters, Elektroteks

stands out in the sector with its

original designs, quality certifications,

and customer-oriented approach.

The company maintains strong

relations with its domestic and

international partners, ensuring

high standards at every stage from

production to after-sales support.

Continuing its investments with

determination, Elektroteks remains

the innovative, reliable, and forwardlooking

face of Turkish industry.


59

Plastic Bottle / Plastik Şişe Flake / PET Kırığı Polyester Chips / Cips Poliester Staple Fiber / Kesikli Lif

Wadding Roll / Rulo Vatka

PRO SOFT ELYAF / Pro Soft Fiber

%25 daha hacimli ve performans verimliliği ile

uzun süreli kVonfor ve hacim sağlar. Nefes

alabilen, nem geçirgenliği yüksek, yumuşak

dokuya sahiptir. Isı ve nem dengesini sağlar.

It provides long-term comfort and volume with 25%

more volume and performance efficiency.

Breathable, high moisture permeability, soft touch.

Provides heat and moisture balance

FR ELYAF / Flame Reterdant Fiber

Nefes alabilen, nem geçirgenliği yüksek,

yumuşak tuşe. Uzun ömürlüdür. Yüksek

sıcaklıklara dayanıklıdır ve ısıyla çekme

yapmaz. 60°C'de yıkanabilir.

FR (BS 5852:2006 Bölüm 1 ve 2)

Breathable, high moisture permeability Soft touch,

good touchfeeling. Long lasting. Resistant tohigh

temperatures and does notshrink in heat.

Washable at 60 °C. Resistant to high temperatures

and does not shrink in heat. Flame retardant

(BS 5852:2006 Part 1 and 2)

REJENERE ELYAF (Recycle)

Recycled Fiber






good touch feeling. Long lasting. Resistant to high

temperatures and does not shrink in heat.

Washable at 60 °C.

MİKROJEL ELYAF / Microgel Fiber

Kaz tüyü yumuşaklığı ve sıcaklığı. Nano

teknoloji. Uzun süreli konfor ve hacim.

Nefes alabilir. Isı ve nem dengesini sağlar.

Goose down softness and warmth. Nano tecnolgy.

Long-lasting comfort and volume. Breathable.

Provides heat and moisture balance.

VİRJİN ELYAF / Virgin Fiber






good touch feeling.Long lasting. Resistant to high


Washable at 60 °C.

YÜN ELYAF / Wool Fiber

Doğal olarak sıcak bir uyku ortamı sağlar.

Özel yün karışımı ciltte kaşıntı ve tahrişi

önler. Nem dengeleme özelliği vardır. Nefes

alabilir , çevre dostu.

Provides a naturally warm sleep environment.

Special wool blend prevents itching and irritation

on skin. Has moisture management feature.

Breathable. Eco-friendly.

SİLİKONLU ELYAF/Siliconised Fiber






good touch feeling.Long lasting. Resistant to high


Washable at 60 °C.

VİSİL ELYAF / Visil Fiber




yapmaz. 60°C'de yıkanabilir. FR (BS 5852:

2006 Bölüm 2 - Crip 5, EN ISO 14116: 2015)


good touch feeling.Long lasting.Resistant to high


Washable at 60 °C. Resistant to high temperatures

and does not shrink in heat. Fire Barrier (BS

5852:2006 Part 2 - Crip 5, EN ISO 14116:2015)

TS 13616

BS 5852

BONCUK ELYAF / Ball Fiber

İnsanlara ve çevreye zarar vermez. Isı

yalıtımı sağlar. Yumuşak tuşe. Uzun ömürlü.

40°C'de yıkanabilir.

FR (BS 5852:2006 Bölüm 1 ve 2)

It does not harm people and the environment.

Provides thermal insulation. Soft touch, good touch

feeling. Long lasting. Washable at 40 °C.

Flame retardant (BS 5852:2006 Part 1 and 2)

SIVI İTİCİ ELYAF

Hydrofobic Fiber

Sıvı itici özelliği sayesinde yüzeyin neme

etkili bir şekilde direnmesi ile sıvı

geçirmezlik performansı sağlar. Böylelikle

sıvıyı yüzeyinde tutmaz.

Because of its liquid-repellent feature, it provides

liquid-tight performance by effectively resisting

moisture on the surface. does not retain water on

its surface

12.HTR.05064

Hohenstein HTTI

Fire

Retardant

Profile

Bedcovers: The name of quality,

innovation, and trust in bedding textiles

Standing out with its innovative approach in the bedding textile

industry, Bedcovers has become one of the most trusted brands in the

sector with its focus on production quality and customer satisfaction.

Founded under Günaydın/

Kardeşler Tekstil, whose

roots date back to 1995,

the company established the

“Bedcovers” brand in 2007,

marking a new era in bedding

textiles. In 2009, it gained

recognition for developing a

product specifically designed for

the protection and transportation of

mattresses — a first in the world.

In 2011, Bedcovers launched a

production facility dedicated to

covers for foam mattresses, and in

2018, the company expanded its

portfolio by adding the “Günaydın”

brand to its structure.

Today, Bedcovers exports to

50 countries, operating actively

in markets such as France,

the Netherlands, Germany,

Switzerland, the United Kingdom,

Serbia, Israel, Azerbaijan, Bulgaria,

and Kazakhstan. General Manager

Duygu Günaydın Atalay says,

“Our goal in bedding textiles is

to achieve reliable, high-quality,

and sustainable production. We

have reached steady growth both

domestically and internationally.”

Production focused on design,

comfort, and ergonomics

Bedcovers serves hotel, hospital,

and home textile sectors with

products such as mattress covers,

duvets, bedding sets, and mattress

bags. The company’s production

facilities are equipped with modern

machinery and continuously

upgraded technology that keeps

pace with global innovations.

Atalay summarizes the brand’s

vision: “Design, comfort, and

ergonomics are integral to each

other. In every new product, we

prioritize the user experience.”

All products are manufactured in

accordance with OEKO-TEX and

TSE standards, ensuring they

are free from harmful chemicals,

durable, and long-lasting. The

company is also certified under

the ISO 9001:2015 quality

management system. Each

product is tested by the quality

control department before being

delivered to the customer.

Sustainable growth and

customer satisfaction

To ensure lasting customer


satisfaction, Bedcovers provides

post-delivery support as part of its

service philosophy.

“The relationship with the customer

doesn’t end with the sale,” says

Atalay. “We carefully evaluate every

feedback and respond with quick

and effective solutions.”

The company focuses on

sustainable growth through

environmentally responsible

production. Investments that

enhance energy efficiency and the

use of recyclable materials are key

priorities in its operations.

Strong presence at

IBIA Expo 2025

This year, Bedcovers showcased

its latest collections at the IBIA

Expo 2025 held at the Istanbul

Expo Center.

“The exhibition was very productive

for us,” Atalay explains. “It was not

only a great opportunity to meet

with our existing customers but

also to establish new business

connections.”

The brand drew attention with its

simple designs, soft textures, and

long-lasting fabrics, particularly for

hotel textile products. “For us, it’s

not only about presenting products

but also about observing market

trends and innovations firsthand,”

she adds. “That’s how we continue

to develop our collections.”

“Maintaining quality is the

strongest investment”

Despite its rapid growth,

Bedcovers continues to place

stability and quality at the core of

its production philosophy.

“We value steady progress over

quick expansion. Maintaining

quality is the most important

investment for us,” says Atalay.

With its dynamic and forwardthinking

structure, Bedcovers

continues its journey in the

bedding industry under the motto

“Time for Change.” Each new

collection combines user-friendly

designs, sustainable fabrics, and

modern aesthetics — reaffirming

the brand’s commitment to

excellence and innovation in

bedding textiles.


63

Profile

Erplast stood out at IBIA Expo 2025 with

27 years of experience in the packaging

industry

Erplast became one of the most remarkable brands at the fair with its

innovative production approach and sustainable packaging solutions.

As one of the leading

manufacturers in the plastic

packaging industry, Erplast

Hocaoğlu Amb. Pls. San. ve Tic. A.Ş.

entered the market under the “Erplast”

brand in 1998. The company began

its operations at the Osman Kavuncu

Industrial Site in Kayseri, producing

printed and unprinted packaging films.

Today, Erplast operates in a 11,000

m² closed-area facility located in the

Kayseri Organized Industrial Zone,

focusing its investments on innovation,

technology, and environmental

responsibility.

With its efficiency-oriented philosophy

and uncompromising commitment to

quality, Erplast has become a reliable

solution partner for both domestic and

international markets.

Strong interest and new

connections at IBIA Expo 2025

Participating in IBIA Expo 2025,

held between September 23–27,

2025 at the Istanbul Expo Center,

Erplast attracted strong attention,

particularly from mattress and

furniture manufacturers. Sales

Manager İsmail Eraslan told Sleep

Tech, “The fair was extremely

productive for us. We had the

opportunity to meet with our existing

clients while also building

valuable new business

connections.”

Eraslan emphasized the

increasing demand from

European and Middle

Eastern professionals

for recyclable packaging

products, stating: “Our

production line with a

low carbon footprint and

our sustainable materials

policy drew the attention of

environmentally conscious

manufacturers. The interest

we received confirmed that

we are on the right path.”

Investment, innovation,

and export targets

Erplast manufactures a

wide range of packaging

products, including printed

and unprinted industrial films, pallet

covers, shrink films, perforated bags,

stretch films, garbage bags, shopping

bags, bubble wraps, and grip-seal

packaging. The company aims to

increase its production capacity by

40% by 2026, with plans to expand

further into the Middle Eastern,

Balkan, and North African markets.

Eraslan noted, “We are expanding our

production line with new machinery to

respond to customer demands faster

and more flexibly.”

Sustainable production and

environmental awareness

Erplast follows an environmentally

responsible policy by increasing

the use of recycled raw materials

in its production. The company

also works to reduce its carbon

emissions through modern, energysaving

systems and provides regular

training to employees to promote

eco-friendly production awareness.

In addition, Erplast plans to complete

its environmental certification process

by 2026, documenting its compliance

with international green production

standards.

A brand looking to the future with

confidence

Expressing satisfaction with the

positive feedback received at IBIA

Expo 2025, Eraslan said, “This fair

significantly increased our brand

visibility in global markets and gave

new momentum to our export goals.”

With its dedication to quality, trust,

and innovation, Erplast continues

to move forward confidently as

one of Türkiye’s rising forces in the

packaging industry.


Feltturc & Kaliteks highlighted 21 years

of experience in mattress components

at IBIA Expo 2025

Feltturc & Kaliteks stood out at IBIA Expo 2025 with its innovative

production strength, export vision, and quality-driven approach.

With more than 20 years

of experience in the

mattress components

industry, Feltturc & Kaliteks is

one of Türkiye’s well-established

manufacturers. The company

produces nonwoven felt, fiber, and

insulation materials for mattress

manufacturers and is recognized as

a trusted supplier both domestically

and internationally. Operating in a

modern facility within the Kayseri

Organized Industrial Zone, Feltturc

combines sustainability, durability,

and comfort in its production

processes.

Company partner Mustafa Kiper

told Sleep Tech, “We develop

solutions that bring comfort, quality,

and longevity to the mattress

industry. For us, production is

not just a business activity—it’s

a responsibility to ensure lasting

quality.”

Strong presence and international


During IBIA Expo 2025, held

September 23–27, 2025 at the

Istanbul Expo Center, Feltturc

& Kaliteks showcased its

next-generation products and

advanced technologies to industry

professionals.

Mustafa Kiper

explained, “This

year, the exhibition

coincided with

Interzum, which

slightly reduced

visitor numbers,

but in terms of

quality, it was

highly productive.

We established

new distributor

relationships and

strengthened

ties with our

existing partners,”

highlighting the

fair’s value for the

industry.

Feltturc & Kaliteks’s booth attracted

strong attention from visitors across

the Middle East, North Africa, and

Europe, who praised the products

for their unique balance of flexibility,

lightness, and durability.

Investment, innovation, and

sustainable growth in exports

Feltturc & Kaliteks adopts an ecofriendly

production model by using

recyclable raw materials and energyefficient

systems. Its felt products

enhance heat, sound, and moisture

insulation in mattresses, improving

comfort and product longevity.

Mustafa Kiper noted, “Our

investment plans focus on

sustainable growth. We aim for

steady expansion in exports

because, alongside quality,

production speed has become the

new standard of competitiveness.”

Currently exporting to 40 countries,

Feltturc & Kaliteks plans to enter

the Africa and Northern European

markets by 2026. The company

also intends to boost its production

capacity by 30% through new

machinery investments.

Industry unity and a confident

outlook for the future

Emphasizing the importance of

collaboration within the sector,

Mustafa Kiper said, “IBIA has

become the international showcase

for Türkiye’s mattress components

industry. Even if attendance is

modest, missing this fair would be

a much greater loss.”

With its commitment to quality,

trust, and innovation, Feltturc &

Kaliteks continues to strengthen

its role as one of Türkiye’s rising

forces in the mattress components

industry, advancing confidently

toward sustainable growth in

production and exports.


65

Profile

Baknoteks aims for technology and

sustainable growth in nonwoven production

Among Türkiye’s leading nonwoven fabric manufacturers, Baknoteks

was founded in 2012 in Kayseri. The company produces nonwoven

fabrics for the furniture, mattress, textile, and medical industries,

continually expanding its production capacity and product range

through ongoing investments.

As the first nonwoven fabric

manufacturer in Kayseri,

Baknoteks has reached a

monthly production capacity of

1,100 tons, offering fabrics ranging

from 10 to 150 grams per square

meter and widths between 2 and

330 centimeters. The company

provides this wide variety of

products in multiple colors and

applications to meet customer

needs.

Eyüp Baktır, Domestic and

International Trade Manager of

Baknoteks, explains the company’s

focus on innovation: “We have the

capacity to produce up to 1,100

tons per month. We use the latest

technology, and our R&D activities

continue. We are committed to

creating value-added products, and

to achieve this, we constantly invest

in new technologies.”

New SMS line enhancing

production capacity

In 2022, Baknoteks expanded its

existing SS production lines by

adding a new SMS line, significantly

increasing its production power and

product diversity.

“We commissioned our new SMS

line,” says Baktır.

“Our two existing

lines had a width of

2.40 meters. The

new line has a width

of 3.20 meters and

also allows us to

produce meltblown

fabrics. Investments

will continue to grow

each year.”

Thanks to this new

line, Baknoteks

has expanded its

capabilities beyond

the mattress and

furniture sectors,

now serving medical

and technical textile

industries as well.

60% growth

achieved in 2022

The company

achieved 60% growth

in both capacity and turnover during

2022. “Sixty percent of our sales

were in the domestic market and

40% in exports,” Baktır explains.

“In 2023, we plan to focus more on

exports and deliver our products to

a wider range of countries.”

Baknoteks aims to strengthen its

presence particularly in European

and Middle Eastern markets,

while also planning to exhibit its

products at the ISPA Fair in the USA,

further expanding its international

recognition.

Solidarity and optimism in

the sector

Participating in the IBIA Expo 2025

Eyüp Baktır,

Domestic and International Trade Manager of Baknoteks

this year, Baknoteks closely followed

sectoral developments. “The fair was

a bit quieter this year,” Baktır says,

“but it’s still important for visibility

and keeping a pulse on the industry.”

He also notes the growing

competition and price pressure in

the market: “Nonwoven fabric is no

longer a standalone product. It now

needs to be complemented with

additional materials.”

Highlighting the importance of

solidarity during challenging times,

Eyüp Baktır concludes with a

hopeful message: “We can only

overcome this period by supporting

one another. At Baknoteks, we will

continue to grow our production,

employment, and exports.”


Apex Adhesive: A global power in

bonding solutions

With its forward-thinking production philosophy, Dellsa Kimya has swiftly

established itself among the most dynamic new-generation brands in the

chemical industry, guided by an export-driven growth strategy.

Backed by over 15 years of

industry experience, Apex

Adhesive has become a

leading name in the chemical and

adhesive sectors — celebrated

for its high-performance

products, technical excellence,

and commitment to sustainable

manufacturing. Headquartered in

Türkiye, the company operates

across five continents, serving

clients in more than 40 countries

through a strong and expanding

distribution network.

Since its entry into the chemical

sector in the mid-2000s, Apex

Adhesive has earned its place

among global leaders with reliable,

high-quality adhesive solutions.

Guided by a future-oriented mindset,

the company focuses not only on

producing superior products but

also on cultivating long-term trust

among its customers. From the

very beginning, its mission has

centered on “lasting quality and

customer satisfaction” — a principle

that continues to drive the steady

expansion of its product portfolio.

Advanced

formulations

for the bedding

industry

In mattress

manufacturing, the

precise bonding

of foam layers

plays a crucial

role in ensuring

product quality

and comfort.

Apex Adhesive’s

specialized

formulas prevent

delamination over

time, significantly

enhancing mattress

durability and

longevity. The company’s expertise

in this field is built upon the pillars of

quality, comfort, and trust.

Yet Apex’s industrial footprint

extends far beyond bedding. The

company also provides tailormade

adhesive systems for the

furniture, automotive, insulation,

HVAC (heating, ventilation, and air

conditioning), and textile industries.

In every application, its goal remains

the same: to create powerful,

lasting bonds between materials —

improving both performance and

aesthetic value.

Sustainability and R&D

leadership

At Apex Adhesive, sustainability is

not a slogan but a core philosophy.

The company continuously works to

reduce its carbon footprint through

energy-efficient processes, waste

minimization, and the use of ecofriendly

raw materials.

Its dedicated R&D division develops

new adhesive formulations every

year, responding to the evolving

demands of multiple industries.

These research efforts go beyond

performance enhancement —

focusing equally on application

efficiency, production speed, and

cost optimization, ensuring clients

gain measurable benefits from every

innovation.

A trusted global partner

Today, Apex Adhesive proudly

serves over 500 clients worldwide,

earning a reputation as a reliable and

forward-thinking business partner.

Through continuous innovation

and technological investment,

the company delivers customized

solutions that strengthen longterm

collaborations across diverse

sectors.

With a vision to deliver “perfect

adhesive solutions,” Apex Adhesive

continues to shape the future of the

global chemical industry — uniting

quality, innovation, and sustainability.


67

Profile

Feryal Group strengthens its position in

the bedding accessories market at

IBIA Expo 2025

As one of the well-established brands in the zipper and textile

accessories industry, Feryal Group drew attention at IBIA Expo 2025

with its 33 years of experience, strong export network, and qualityoriented

production approach.

Operating in the zipper

industry for more than three

decades, Feryal Group has

become one of the trusted partners

of the mattress industry. For the

past 20 years, the company has

focused on producing long size

zippers specifically designed for

mattresses, while also manufacturing

complementary textile accessories

such as woven tapes, carrying

handles, elastics, and piping.

Previously serving the apparel

industry as well, Feryal Group now

dedicates 95% of its production to

mattress manufacturers.

Headquartered in Güngören,

Istanbul, the company manages its

administrative, financial, and export

operations from there. Its production

and weaving processes are carried

out at its 20,000 m² modern facility

in Kütahya, established five years

ago. With a team of about 115

employees, the company supplies

nearly all major mattress brands in

Türkiye.

A leading exporter and an IKEAapproved

supplier

Between 80% and 90% of the

company’s production is exportoriented.

Feryal Group is an

approved supplier of IKEA, the

world’s largest furniture and

mattress manufacturer. Its products

are produced in compliance with

international quality and testing

standards.

Oğuzhan Vural, production and

planning manager, emphasized

that the brand’s international

collaborations have made it

more visible and reliable in the


global market: “Our consistent

manufacturing philosophy and use of

high-quality materials have opened

the door to long-term collaborations

with leading global brands.”

IBIA Expo 2025: Quality visitors

and strong business connections

Participating in IBIA Expo 2025, held

between 23–27 September 2025

at the Istanbul Expo Center, Feryal

Group showcased its latest zipper

and textile accessory solutions to

industry professionals.

Vural noted that Akın Bebek,

chairman of the board, is also one

of the founding members of IBIA,

adding:

“IBIA is not just a fair for us; it’s a key

meeting point where we strengthen

relationships with our partners and

build new connections. Face-toface

communication is always more

effective than digital.”

Feryal Group has been participating

in IBIA since its very first edition.

Vural stated that while visitor

numbers used to be higher in

previous years, recent editions have

proven to be more productive thanks

to fewer but more qualified visitors.

Industry insight and future

vision

Vural stated that although both the

global market and the Türkiye market

continue to grow, the rate of growth

has declined in recent years. He

noted that economic pressures have

led to a drop in demand for high-end

products, as consumers increasingly

turn to more affordable alternatives,

resulting in declining profitability for

companies.

However, Vural emphasized

that Feryal Group has never

compromised on its quality-oriented

production approach, saying:

“We believe that a sustainable

manufacturing mindset and

innovative solutions will drive our

company forward in the long term.”

The company plans to strengthen its

presence in European markets while

continuing to invest in efficiency

and innovation within its production

processes.

With quality, trust, and innovation

at the core of its manufacturing

philosophy, Feryal Group continues

to rise as one of Türkiye’s leading

brands in the bedding accessories

industry, expanding its presence on

the global stage.


69

Profile

Metal Matris took its place once again

at IBIA Expo 2025, meeting with both

domestic and international customers

With its expertise in steel wire, bonnell springs, and pocket spring production

for the mattress and furniture industries, Metal Matris stood out as one of the

key exhibitors at this year’s IBIA Expo. The company continues to strengthen its

reputation as a reliable supplier and makes new investments every year in line

with its ambition to be among the leading players in the national market.

Founded in 2004, Metal Matris

operates through its production

facilities in Kayseri and İzmir.

The company exports to 65 countries

and maintains a strong domestic

presence. Through continuous

investment in technological innovation

and its commitment to sustainable

growth, Metal Matris aligns its

production capabilities with a global

market vision.

Participation in IBIA Expo 2025

and event evaluation

Onur Herdem, Domestic Sales &

Brand Marketing Chief at Metal

Matris, shared his evaluation of

the company’s fourth participation

with Sleep Tech: “We have been

attending the IBIA Expo regularly

since its first edition. We are already

a well-known brand in Türkiye,

so our primary goal here is to

strengthen our export connections.

Although the visitor numbers were

slightly lower compared to previous

editions, we still had the opportunity

to meet new companies from

international markets.”

Held from 23–27 September 2025

at the Istanbul Expo Center, IBIA

Expo 2025 proved productive in

terms of building new business

relationships. Herdem added,

“The fair allowed us to reconnect

with existing partners, meet new

manufacturers, and gain a clear

sense of the sector’s direction.”

Visitor profile and key

observations

The Metal Matris booth drew

strong interest particularly from

visitors from the Balkans (Bosnia

and Herzegovina, Albania), as well

as Iraq and Greece. Herdem noted

that the expected visitor traffic from

the United Kingdom was lower this

year, attributing this to scheduling

overlap with major international

events such as Interzum.

Recommendations for future

editions

Herdem stated, “Holding IBIA

every two years would be more

sustainable for participating

companies. It would allow

exhibitors to manage their

preparation periods more

effectively and would make the

fair even more attractive on an

international scale.”

He also highlighted the

organization’s overall quality: “The

fairground is compact and easily

accessible. Since the exhibitors are

genuinely key players in the sector,

they naturally become the focal

point for visitors. The organization

and venue offer an almost flawless

experience for participants.”

Onur Herdem, Domestic Sales & Brand

Marketing Chief at Metal Matris

Industry outlook and production

strategy

Herdem emphasized their ability

to adapt swiftly and effectively to

market dynamics: “The mattress

industry continues to grow at a

strong and steady pace every year.

The global market value currently

stands at around USD 30.81

billion, and this figure is expected

to nearly double by 2030. The

key is to analyze this growth

correctly and shape our objectives

in line with evolving consumer

preferences. Today, approximately

56% of consumers make their

purchases online. Accordingly,

manufacturers adjust their product

features, packaging methods, and

sales strategies to meet this shift.

At Metal Matris, we closely monitor

technological developments and

make new investments each year

to meet these emerging needs.”


Profile

Aydın Mattress Ticking: A global brand

growing through innovation

With more than 40 years of industry experience, Aydın Mattress

Ticking continues to move forward confidently toward becoming

a global brand in the field of mattress and upholstery fabrics,

distinguished by its innovative products, strong export network, and

customer-oriented approach.

Aydın Mattress Ticking

is one of Türkiye’s most

established and innovative

companies, producing upholstery

fabrics for furniture, sofas,

couches, and mattresses. Utilizing

advanced machinery and state-ofthe-art

technology, the company

manufactures at world standards,

representing the power of Turkish

textiles in global markets

with its steadily growing

export volume each

year. Exporting to more

than 120 countries,


has become a symbol

of both quality and

innovation, thanks to

its know-how, modern

production facilities, and

expert staff.

During our meeting at

the IBIA Expo 2025,

held at the Istanbul

Expo Center between

September 24–27,

2025, Muhittin Tut,

Regional Sales Manager

– Mattress Ticking

at Aydın Mattress

Ticking expressed his

satisfaction with the

strong visitor interest

even on the second day

of the fair, saying:

“We have participated

in the IBIA Fair every

year since it first

began. This is our

fourth participation.

For us, the fair is not

just a sales point but a

platform for new collaborations and

new opportunities.”

Shaping the future with

innovative fabric technologies

At this year’s IBIA Fair, Aydın

Mattress Ticking introduced three

new products and technologies.

Leading the lineup was Coolgen,

a fabric that combines cooling

yarn with collagen technology.

Offering both a cooling effect and

skin-friendly properties, this nextgeneration

fabric is particularly

popular in warm climates,

providing a comfortable sleep

experience while also contributing

to sustainable production

practices.

Another innovation, Coolbalance,

was designed especially

for athletes. Featuring

cooling yarn at the

head and foot sections

and far-infrared

technology at the

center of the body, the

fabric balances body

temperature, ensuring

a more comfortable

and healthy sleep. This

product has already

attracted significant

attention in sports

mattresses, hotels,

and wellness-focused

projects.

The third new product

is a natural-surface,

water-repellent fabric

that successfully

passes Crib 5 and

FR tests. Widely

demanded in the UK

and hotel sectors, it

stands out with both its

aesthetic and functional

qualities. “All of these

products are the result

of our R&D strength,”

notes Tut. “We received

very strong feedback

from visitors — many


requested samples and even

placed pre-orders.”

A trusted name around the world

Aydın Mattress Ticking drew

significant attention at the fair,

not only for its product quality

but also for its sincere approach

to customer relations. Tut

emphasizes,

“We don’t see our customers

merely as business partners. We

build relationships with them like

family. Everyone who visits our

booth talks with us about the

market, the trends, and the sector.

For us, the most important thing is

mutual trust.”

Evaluating the current state of the

industry, Tut acknowledges that

global uncertainties and conflicts

affect purchasing power. However,

Aydın Mattress Ticking continues to

grow despite these challenges:

“Of course, there is a slowdown

worldwide. But because our name is

trusted, customers approach us with

confidence. We keep increasing our

orders and shipments.”

According to Tut, this success

comes not only from strong

production capacity but also from

the company’s belief in innovation

and quality. With its woven and

knitted collections, use of natural

yarns, and environmentally friendly

manufacturing, Aydın Mattress

Ticking serves as a model within

the textile sector.

A strong presence on the

international stage

Aydın Mattress Ticking has also

made its mark in international

exhibitions, participating

in Interzum (Germany)

and Heimtextil (Frankfurt)

earlier in 2025. The

company plans to

attend ISPA (USA) and

Formobile (Brazil) in

the coming period.

“We aim to carry the

Turkish flag at every

major international

organization,” says Tut

with pride.

The company has already

begun preparations

for 2026. Conducting

color, pattern, and trend

analyses in midyear,


plans to enrich its

mocha-toned 2025

collection with new

textures, nature-inspired

tones, and refreshed

patterns for the upcoming

season.

“We always aim to go

beyond where we are,” says Tut.

“Our plans are ready before the

new year begins. We determine

which colors and textures will be

trending and shape our collections

accordingly. Customers today don’t

just buy fabric; they buy a story —

and we are here to tell that story.”

Stronger together, moving

confidently toward the future

In his message to the industry,

Muhittin Tut highlights the

importance of unity and resilience:

“We must stay strong and stand tall.

This is not only for Aydın Mattress

Ticking but for all of our companies.

We represent our country. The more

we grow as Türkiye, the higher our

name will rise.”

Tut’s words sum up the vision

of Aydın Mattress Ticking: while

investing in high technology,

innovation, and sustainability, the

company also works hand in hand

with the entire sector to elevate

the reputation of Turkish textiles

worldwide.

With its deep-rooted experience

and innovative spirit, Aydın

Mattress Ticking continues to

blend tradition with technology.

Every year, through its newly

developed products, participation

in major fairs, and expanding

international network, the company

not only strengthens Türkiye’s

textile power but also shapes

the future of the global mattress

industry.


73

Profile

Askom Tekstil: A success story built on

handcraftsmanship and vision

What began seven years ago in a small workshop with two machines

has grown into a powerful story of craftsmanship, innovation, and

resilience. Today, Askom Tekstil stands as a rising name in the mattress

industry, offering products that combine handmade quality with advanced

technology, serving both domestic and international markets.

Specializing in upholstery

materials for sofas, couches,

and mattresses, Askom

Tekstil’s guiding principle is to deliver

world-class solutions by integrating

the latest technologies with artisanal

production. With its expertise,

technological capacity, and skilled

team, the company continues its

steady journey toward sustainable

global growth.

Speaking at IBIA Expo 2025, held

between September 24–27 at

the Istanbul Expo Center, founder

Arzu Demir shared her insights

and experiences with Sleep Tech

readers. What started with two

machines in Istanbul has evolved

into a state-of-the-art production

facility in Sakarya-Akyazı-Kuzuluk,

combining efficiency, quality, and

passion. “Everything we achieved

came through determination and

hard work. This success is entirely

handcrafted,” says Demir, reflecting

the company’s ethos.

Empowering women, adding value

through handcrafted pompons

Among Askom Tekstil’s diverse

range — including tufting tapes,

elastic webbings, button caps, and

mattress ribbons — the handcrafted

wool pompons hold a special

place. Around 50 women produce

these pompons at home, turning

traditional handcraft into an element

of industrial design. Demir describes

them as “the finishing touch — the

signature detail that completes a

mattress.” These artistic details

enhance the aesthetic appeal by

up to 60%, creating a significant

competitive edge in global markets.

Strong international interest at

IBIA Expo

Askom Tekstil’s second participation

in IBIA Expo exceeded expectations.

“The fair went far better than last

year; we received remarkable

attention, particularly from the

Middle East and Europe,” says

Demir. Visitors from Iran, the

Balkans, Dubai, and Qatar showed

great interest in the company’s

tufting and handcrafted pompon

products, reinforcing Askom Tekstil’s

growing global presence.


Türkiye on the path to becoming a

global mattress hub

Commenting on the future of the

industry, Arzu Demir notes: “Many

furniture manufacturers are shifting

to mattress production, and even

suppliers are adapting to this

new direction. We can clearly see

this transformation in production

centers like Kayseri.” Demir believes

that Turkey is steadily becoming

the new global hub for mattress

manufacturing.

“When the Storm Comes, the

Tallest Trees Break — the Grass

Bends and Rises Again”

Despite global economic challenges,

Askom Tekstil continues to move

forward with confidence and

optimism. Demir concludes with

a philosophy that defines the

company’s spirit: “When a storm

comes, the tallest trees break, but

the grass bends and rises again.”

This quote encapsulates Askom

Tekstil’s journey — a story of

resilience, craftsmanship, and vision

shaping a bright future.


77

Profile

Akdemir Group marks its global presence

in spring unit roll pack machinery

With the strength of three generations and over 90 years of

manufacturing experience, Akdemir Group continues to expand

its expertise in textile and plastic packaging machinery across 76

countries worldwide.

Founded in 1934 by the late

grandfather of the Akdemir

family, the company is now

led by the third generation, Ahmet

Akdemir and Osman Akdemir.

Operating under the name Akdemir

End. Amb. Mak. San. Tic. Ltd. Şti.,

the company serves Turkish industry

from its 3,500 m² open and 3,000

m² closed facilities in the Kayseri

Organized Industrial Zone.

Over the past three decades,

Akdemir Group has specialized

in designing and manufacturing

custom machinery for the plastics,

upholstery, and home textile

industries. Equipped with advanced

machining technologies and a highly

trained technical team, the company

has proven its expertise through

numerous successful projects,

becoming a trusted manufacturer

both in Türkiye and abroad.

Built on a heritage of

craftsmanship

Carrying forward a long-standing

family tradition in manufacturing,

Akdemir Group stands out for

its expertise in textile and plastic

packaging machinery, as well as in

spring unit roll pack machines used

in mattress production.

Renowned particularly for its

Spring Unit Roll Pack Machine,

the company provides a significant

logistical advantage by reducing the

volume of spring units by up to onefifteenth

during packaging.

“Transporting one truckload of

springs used to require fifteen

trucks. With our Roll Pack machine,

we eliminated that inefficiency,” says

General Manager Ahmet Akdemir,

noting that both domestic and

international manufacturers prefer

this advanced technology.

Taking Turkish Engineering

beyond borders

Akdemir Group’s production

capacity has long surpassed

the borders of Türkiye. Today, its

machines operate in 76 countries

worldwide.

As a supplier to leading Turkish

spring manufacturers such as

Boyçelik, BRN Sleep Products, and

Kar-As, Akdemir Group continues

to strengthen its international

reputation.

“When people talk about spring

coiling machines, everyone in the


industry knows Akdemir,” says

Ahmet Akdemir, emphasizing that

the company’s reputation rests on

“quality and reliability.”

Trade fairs as gateways to

new markets

In addition to its export operations,

Akdemir Group actively participates

in major international trade fairs.

The company took part in IBIA Expo

2025—held between September

24–27—for the third time, and also

exhibits regularly at global events

such as Düsseldorf K Fair & Koln

Interzum Fair in Germany and Ispa

Expo in United States of America.

“For us, fairs are not just about

promotion—they’re the key to

entering new markets,” Akdemir

explains.

Although this year’s visitor numbers

fell short of expectations, he remains

optimistic that the industry will regain

momentum in the coming years.

Keeping faith in production

Despite the global economic

slowdown, Akdemir Group looks to

the future with confidence, focusing

on continuous improvement through

its R&D team.

Beyond machinery production,

the company is also diversifying

by developing Aluminum Fence

Systems and Conveyor Belts for Ski

Resorts.

“Tough times never last forever,”

says Ahmet Akdemir. “We’ll keep

working, and when the markets

recover, everyone’s face will light up

again.”


81

Profile

Can Kimya: Half a century of trust in

hot-melt adhesive production

Since 1974, Can Kimya has been one of Türkiye’s pioneering adhesive

manufacturers, combining quality, reliability, and innovation through

its Tamtut and Fullbond brands to lead the industry.

Founded in Mersin in 1974,

Can Kimya is among the

most established names in

Türkiye’s chemical industry. Since

its inception, the company has

utilized the latest technologies to

produce hot-melt, solvent-based,

and polyurethane adhesives. Today,

it serves a wide range of industries

including hygiene, packaging,

furniture, printing, footwear, and

construction, standing out not only

for its high-quality products but also

for its commitment to sustainable

production practices.

The company’s CEO Cem

Göğüskabaran and General

Manager Çiğdem Altekin, siblings

who jointly manage the business,

are carrying their father’s legacy

into the future. “We work hard to

keep alive the brand our father

entrusted to us,” says Altekin. This

family-driven unity and shared vision

form the foundation of the trust and

stability that Can Kimya has upheld

for nearly half a century.

Dual strength with Tamtut and

Fullbond

Can Kimya continues its production

under its registered brands Tamtut

and Fullbond. Both are known

for their strong adhesion, ease of

use, and environmentally friendly

formulations. With its principle of

“always the best

product, always

the best service,”

the company has

made customer

satisfaction a core

value.

While Tamtut

has long been a

symbol of reliability

in industrial

applications,

Fullbond stands

out with its

modern production

techniques and

specialized adhesive solutions.

Together, they offer a wide product

range designed to meet the diverse

manufacturing needs of different

industries.

Focused on R&D and

sustainability

Operating at its modern facility

located along the Mersin–Adana

highway, Can Kimya ensures

quality control at every stage of

production. The company’s quality

policy is built on the principle

of “continuous improvement

to achieve excellence.” With

energy-efficient systems, ecoconscious

raw materials, and

recyclable packaging, the

company continues to make

significant strides in sustainable

manufacturing.

Representing Türkiye on the

global stage

Can Kimya actively participates

in major international events,

proudly representing Turkish

chemical manufacturing around

the world. The company has

exhibited at prestigious fairs such

as IDEA Boston, INDEX Geneva,

and Interpack Düsseldorf, each

serving as a valuable platform

for expanding brand visibility and

export markets.

Moving forward with confidence

With nearly 50 years of experience,

Can Kimya is now recognized as

one of the respected producers

not only in Türkiye but also globally.

Guided by technology and quality,

the company continues to develop

next-generation adhesive solutions.

Expanding its product range every

year, Can Kimya moves forward

under the motto: “brands that bond

with trust.”


Galanthus makes a mark at IBIA Expo

2025 with Dolphin Pack representation

in the polyurethane sector

Representing Dolphin Pack in Türkiye, Galanthus drew significant

attention at IBIA Expo 2025 with the company’s innovative mattress

and sofa packaging machine designs.

Based in Kadıköy, Istanbul,

Galanthus operates as a

representative company

providing equipment and chemical

solutions for polyurethane

production technologies. General

Manager Zarif Bilgen emphasized

their mission to bridge leading

European brands with Turkish

manufacturers, stating: “Our goal

is to deliver the latest European

technologies to Turkish producers

and raise the bar in the foam

industry.”

The company currently represents

six Germany-based firms in

Türkiye, covering foam pouring

machines, cutting systems, tank

stations, polyurethane paints, and

mold release agents. Most recently,

Italian packaging and wrapping

machine manufacturer Dolphin Pack

has joined Galanthus’ portfolio.

First IBIA experience: aiming for

networking and know-how

Participating for the first time in

the IBIA Expo 2025, held at the

Istanbul Expo Center

on September 23–

27, 2025, Dolphin

Pack introduced

its packaging

and roll-form

designs to industry

professionals.

Bilgen shared

insights about the

event: “This was our

first time at IBIA,

and we had a short

preparation period.

Our promotional

efforts were

therefore limited,

but the exhibition

provided valuable

exposure and new professional

connections.”

He highlighted that their primary

goal at the fair was not direct

sales, but building networks and

strengthening relationships with

existing customers.

“Visitor traffic wasn’t as heavy

as expected, but we established

quality connections. IBIA was the

right place to start for us,” Bilgen

added.

Fairs and industry presence

Beyond IBIA, Galanthus also takes

part in the PUTECH EURASIA

fair. Bilgen said, “We’ll also be

present at PUTECH EURASIA

in November,” Bilgen noted.

“Moreover, the companies we

represent regularly participate in

major international events such as

INTERZUM, K-DUSSELDORF, and

UTECH.”

Industry outlook and 2026–2027

expectations

Commenting on the current state

of the foam and polyurethane

industry, Bilgen observed the effects

of global market slowdown but

expressed optimism about recovery:

“There is a production slowdown,

but we believe this is temporary.

The market is expected to regain

momentum starting from 2027.”

With its vision of connecting

Turkish manufacturers to worldclass

technologies, Galanthus

continues to deliver efficiency-,

energy-, and quality-focused

solutions through its represented

brands. Centered on quality,

technology, and collaboration,

Galanthus remains committed

to reinforcing its bridge between

Türkiye and Europe, driving

sustainable growth in the

polyurethane sector.


85

Profile

Polya Yatak stood out at IBIA Expo

2025 with its export vision and strong

production capacity

As one of Europe’s leading mattress cover manufacturers, Polya Yatak

attracted attention at IBIA Expo 2025 with its innovative production

power and high export performance.

Founded in 1987 in Istanbul,

Polya Yatak completely shifted

from ready-made mattress

production to the manufacturing of

mattress, pillow, and quilt covers

in 2000. Since 2013, the company

has been operating in its 40,000

m² facility in the Kütahya Tavşanlı

Organized Industrial Zone, ranking

today among the top five producers

in Europe. Sales Representative

Ömer Serez said, “We produce with

high quality and strong capacity. Our

entire focus is on cover production.”

A role model for women’s

employment

With 70% of its 250–300 employees

being women, Polya Yatak

significantly contributes to regional

employment. Serez noted, “This

comes both from the region’s

workforce structure and from the

precision required in textile work —

women’s touch adds real value to

our quality standards.”

Fair insights: Strategy and

quality-focused participation

Having first participated in the IBIA

Fair in 2022, Polya Yatak took part

for the third time in 2025. Serez said,

“This fair is very valuable as it brings

together all industry stakeholders.

However, holding it every year limits

diversity and innovation. Organizing

it every two years would enhance

both quality and participation.”

At this year’s event, the company

aimed to reach new buyers,

particularly from North America

and Europe, while strengthening

collaborations within its supply

chain. “For us, the fair is not only

about finding new customers but

also about deepening our longterm

business partnerships,” Serez

added.

Visitor profile and

market evaluation

Serez stated that most visitors came

from Balkan countries (Albania,

Serbia, Bulgaria), South America,

and North Africa, while participation

from major European markets such

as Germany, Italy, and Poland was

relatively lower. He attributed this to

the global economic slowdown and

the fair’s annual frequency. “This isn’t

unique to Turkey — Interzum 2025

showed a similar pattern,” he said,

emphasizing that the contraction

in global textile markets is only

temporary.

A brand looking to the future

with confidence

Polya Yatak continues to strengthen

its global presence through major

international events such as Interzum

and Heimtextil. Serez concluded,

“2026 will be a year of recovery.

From 2028 onward, we expect a

more dynamic market. Holding IBIA

every two years would further boost

the industry’s momentum.”

With its focus on quality, sustainable

production, and women’s

employment, Polya Yatak once

again highlighted the strength and

innovative vision of Turkish textiles at

IBIA Expo 2025.


Yaskawa makes its debut at IBIA Expo

2025: The power of Japanese engineering in

robotics arrives in Türkiye

Founded in 1915 in Japan, Yaskawa—a global pioneer in robotics and motion

control systems—participated in IBIA Expo 2025 for the first time.

Kaya Kurt, Customer Manager

at Yaskawa Türkiye, shared

insights about the company’s

promotional activities during the fair

and his observations on the sector.

Yaskawa is known in the machinery

industry for its servo motors, AC

drives, and robotic solutions—

high-tech products that

enhance precision, speed,

and efficiency. Highlighting

their importance

particularly in mattress

production machinery,

Kurt said, “Our motion

control systems play a

major role in improving

machine performance

in the bedding industry.

That’s why IBIA has been

the perfect meeting point

for us.”

A new era in the

Türkiye market

Emphasizing that this

year marked Yaskawa’s

first participation in IBIA,

Kurt noted: “Here, we

presented our robots,

drive technologies,

and advanced control

systems, offering

innovative options to

machinery manufacturers.

By the third day, we had

already received highly

positive feedback from visitors.”

The company also attended the

Robot Investments Summit held

recently in Gebze, further boosting

its visibility in the Turkish market.

By maintaining an active presence

at similar fairs and industry events,

Yaskawa Türkiye aims both to

strengthen relationships with existing

clients and to develop new business

partnerships.

A vision for 2026 in the

machinery industry

Kurt emphasized that Türkiye’s

machinery sector is home to

innovative and globally competitive

companies:

“The key strength of these firms

lies in their ability to combine skilled

human resources with the right

technological solutions. At Yaskawa,

we contribute by providing reliable,

performance-proven products that

meet these needs.”

Pointing out Türkiye’s strategic

logistical and economic position,

Kurt added: “If we manage this

advantage wisely, I believe we can

surpass many countries by 2026.”

Perspectives on the fair’s future

The Yaskawa team stated

that the current timing

of the fair is suitable

but suggested that

organizing IBIA every

two years, in line with

international standards,

would give companies

more opportunities to

showcase their latest

innovations.

“Globally, fairs like this are

typically held biennially,

allowing brands to

prepare and present their

new technologies more

effectively. We believe the

industry associations will

reach a shared decision

on this matter,” Kurt said.

Bringing together

Japanese engineering

excellence with Türkiye’s

strong industrial

infrastructure, Yaskawa

showcased its innovative

technologies at IBIA Expo

2025, earning high praise

from both industry professionals

and manufacturers. With this first

step into the Türkiye market, the

company aims to accelerate its

regional growth and contribute

to technological progress in the

industry through new strategic

partnerships.


87

Profile

Sinova Bedding debuts in Türkiye with

innovative mechanisms at IBIA Expo 2025

Sinova Bedding introduced its advanced motion bed systems and

metal components at IBIA Expo 2025, marking its entry into the

Türkiye market with innovation and precision.

Combining European

experience with local

ambitions, the brand

impressed visitors with its highquality

and functional mechanism

solutions designed for modern

comfort.

Expanding from Europe to

Türkiye

As a manufacturer exporting to

19 European countries, Sinova

Bedding joined the fair to introduce

motion bed systems that are still

relatively new to Türkiye. Company

representative Aykut Çelik said,

“Our products have received great

attention in Europe. In Türkiye,

these systems are just beginning

to attract interest, and we aim to

raise awareness and make them

accessible.”

By the third day of the exhibition,

the company had already achieved

about 70–80% of its goals. “We’re

very pleased with the visitor quality

and feedback. Our objective is to

build a lasting presence in Türkiye,”

Çelik added.

Innovation, R&D, and new

market goals

Continuing to export all its

production abroad, Sinova

Bedding now plans to expand into

the U.S. and Russian markets. “We

regularly participate in Interzum

Cologne and Brussels Furniture

Fair. IBIA has become another

important meeting point for us,”

said Çelik, describing the fair

as “a true intersection of global

business.”

The company’s portfolio includes

motion bed systems, table and bed

bases, mechanisms, hinges, and

profile frames. Focusing solely on

metal production, Sinova defines

itself as a semi-finished product

manufacturer, serving major

international brands.

With an R&D center dedicated to

developing original and practical

designs, Sinova continues to

innovate. One of its popular

models has even been patented

in France, reflecting the brand’s

focus on both aesthetics and

performance.

Çelik emphasized the importance

of trade fairs like IBIA, noting

that “if organized annually, they

would provide greater value to the

industry and accelerate export

growth.”

For 2026, Sinova Bedding aims to

launch new mechanism models,

strengthen collaborations with

leading mattress brands, and

further enhance its international

visibility.

With its innovative production

power, strong European

background, and fresh perspective

on the Türkiye market, Sinova

Bedding stood out as one of the

most notable participants at IBIA

Expo 2025, reinforcing its position

in the global bedding industry.


Profile

Özdemir Malzemecilik stood out at IBIA

Expo 2025 with its innovative production

and export power

Özdemir Malzemecilik, one of the well-established representatives of

the mattress and sofa sub-industry, attracted the attention of the sector

at IBIA Expo 2025 with its 39 years of experience, wide product range,

and success in international markets.

Established in Kayseri in

1986, Özdemir Malzemecilik

is a strong family company

that continues its activities today

with its second-generation

management. The company

prioritizes quality and trust in its

production processes and increases

its competitive power in the sector

every year with its investments in

innovative technologies. At the

fair, the company met with both

existing business partners and

new connections, proving Turkish

production power in the international

arena once again.

From 1986 to today, the name of

stability in production

The Kayseri-based company is

among Türkiye’s leading mattress

and upholstery material suppliers. Its

production range includes essential

parts such as shock absorbers,

pocket springs, bonnell springs,

mattress wicks, and elastic webbing,

as well as complementary products

such as packaging nylon, cardboard,

adhesive, and staples. Foreign

Trade Manager Şeref Özdemir said,

“We produce our main products

ourselves, and we work with reliable

suppliers for other items.”

The star of the fair: Trustinspiring

production quality

Özdemir Malzemecilik participated

in IBIA Expo 2025 for the fourth

time this year. Şeref Özdemir

stated, “Before the fair, we made

one-on-one invitations and carried

out our social media promotions.

These preparations paid off; the

visitor profile to our stand was quite

qualified.”

Özdemir stated that the most

popular products at the fair were

pocket springs, gas spring and

mattress edge tape and said,

“This year, our mattress group

products especially stood out. In

the upholstery group, there was a

more niche but conscious customer

base.”

A brand opening to the world

Today, Özdemir Malzemecilik

xports to 76 countries and provides

logistical advantages with its

warehouses in Georgia and

the UK. Özdemir said, “Our

export rate is currently at

35–40%, and our goal is to

increase this to 50% in the

short term.”

It was also announced that a

special technical presentation

is planned in Kayseri after the

meetings held with the Brazilian

Mattress Association (ABICOL)

delegation within the scope of the

fair.

Continuing production

despite difficulties

Özdemir stated that they did not

stop production despite the global

economic slowdown, saying, «The

sector is currently slower than

expected, but we never stopped.

We are constantly at fairs and in the

field.» He added that they expect a

recovery in the last quarter of 2026.

Changing market, new strategies

Özdemir emphasized that the

transition from spring systems to

foam-based models in mattress

production is accelerating, saying,

“As labor costs increase, contract

manufacturing also increases.

We are constantly renewing our

production plans by adapting to this

change.”

Özdemir Malzemecilik once again

demonstrated the power of Turkish

industry as one of the most striking

brands at IBIA Expo 2025 with its

production quality, export vision, and

innovative approach.


Özay Group became the voice of the industry

at IBIA Expo 2025: “This fair must live on”

Özay Group stood out at IBIA Expo 2025 with its pioneering role

in mattress cover manufacturing, strong export performance, and

constructive industry messages. Company Chairman Lokman Özay

emphasized their long-term commitment to the event, saying, “This

fair is a major achievement for Türkiye. It must continue to thrive and

gain more international recognition.”

A

pioneering brand in

mattress cover production

Based in Bursa, Özay Group

is recognized as one of Türkiye’s

first and leading mattress cover

manufacturers. The company

exports 98% of its production to

markets including the European

Union, the United Kingdom, the

United States, and the Middle East.

“Our focus is entirely on exports,”

Özay noted. “We may not be very

active in the domestic market,

but our mission is to carry Turkish

quality to the world.” Combining

durability, elegance, and sustainable

manufacturing, Özay Group has

earned a solid reputation among

global clients.

IBIA Expo 2025 evaluation and

industry atmosphere

Held from September 23–27, 2025,

at the Istanbul Expo Center, this

year’s IBIA Expo was slightly calmer

than previous editions but still highly

valuable in terms of visitor quality.

Özay explained, “The overall visitor

count was a bit lower this year, but

those who came were focused and

professional. Events like this are

vital for tracking industry trends and

building new business connections.”

Economic conditions and

industrial resilience

Özay highlighted that Turkish

manufacturers continue to

operate steadily despite

challenging economic conditions.

“Manufacturing requires discipline.

Rising interest rates and input

costs put pressure on producers,

but Turkish industry keeps moving

forward under all circumstances,” he

said. He added that exchange rate

fluctuations have influenced exports

but can be managed through

sustainable economic strategies.

Support for manufacturers and

production-focused growth

Özay underscored the importance of

ensuring that government incentives

are directed toward real producers:

“Manufacturers are the backbone of

this country. If incentives focus on

production, employment, and added

value, the Turkish industry will grow

much faster,” he stated.

He also particularly highlighted

that incentives and loans should

be granted to those who genuinely

need them:

“Unfortunately, affordable loans are

currently being used not by those

in real need, but in areas driven

by rent-seeking interests. These

supports must instead be directed

toward businesses that produce,

create employment, and generate

added value — this is vital for the

national economy,” Özay added.

Future outlook and unity

message

Expressing optimism for the coming

year, Özay said, “This is a temporary

period. By 2026, we expect to

see a revival in both domestic and

international markets, as long as

producers are supported.”

He concluded with a call for closer

engagement between policymakers

and industry: “Leaders should

visit the field and see production

firsthand. Türkiye’s strength

comes from manufacturing — not

speculation, but labor.”

Özay Group, with its exportoriented

production strategy, strong

position in European markets, and

commitment to sustainable growth,

reaffirmed its place among the most

notable participants of IBIA Expo

2025, once again showcasing the

power of Turkish industry on a global

stage.


93

Profile

Dorutech stands out as the address

of quality and reliability in technical

textiles at IBIA Expo 2025

Dorutech continues to shape the future of the industry by combining

quality, innovation, and sustainable production through its advanced

nonwoven fabric solutions.

Founded in 2017, Dorutech

has quickly become one of

the most trusted technical

textile brands in Türkiye and

around the world. With 17,000

m² of open and 10,000 m² of

closed production area, the

company operates with a monthly

production capacity of 850 tons,

maintaining steady growth in the

nonwoven and spunbond fabric

sector. Dorutech is not only a

fabric manufacturer but also a

reliable solution partner that unites

innovation, technology, and trust

to create long-term value with its

business partners.

New connections and target

markets at IBIA Expo 2025

At IBIA Expo 2025, held between

September 23–27, 2025, at the

Istanbul Expo Center, Dorutech

showcased its innovative products

and advanced production

technologies in the nonwoven

fabric industry. The company

introduced the potential uses

of its products across different

industries, meeting new customers

while strengthening its relationships

with existing partners.

Marketing Manager Süleyman

Bütün told Sleep Tech, “We bring

technology and trust together in

our modern facilities. We offer

our customers not only products

but also solutions that ensure

sustainable success. Together, we

continue to raise the standard of

quality in this industry,” he said.

Bütün noted that the fair was

highly productive, particularly in

establishing

new business

connections

in Europe, the

Middle East, and

North Africa.

The company

also plans to

expand its

global promotion

network by

participating in

the Indeks Fair

in Switzerland

in 2026 and

Interzum Fair

in Germany in

2027.

Uninterrupted

production after

the earthquake

Although the

company

briefly paused

operations during

the earthquake period, Dorutech’s

facilities remained undamaged.

“After the earthquake, demand

increased significantly, and our

machines have been running

24/7,” Bütün said. He added

that growing demand from the

construction, healthcare, hygiene,

agriculture, and furniture sectors

continues to boost production

capacity.

Approximately 40% of the

company’s production serves the

bedding and furniture industries,

while 60% is directed toward other

industrial sectors. Its products

stand out with antibacterial,

flame-retardant, UV-resistant,

liquid-repellent, and heat-insulating

features.

A call for fair competition in

the sector

Bütün emphasized the importance

of ethical standards, stating,

“There’s enough work for everyone,

but let’s compete fairly.” With its

customer-oriented approach,

flexible production capability,

and innovation-driven R&D

investments, Dorutech continues

to strengthen its position as one of

Türkiye’s rising forces in technical

textiles.


Elifoğlu Plastik becomes the symbol

of quality and trust in furniture

accessories with 30 years of experience

Kayseri-based Elifoğlu Plastik attracted significant attention at IBIA

Expo 2025 with its innovative approach to furniture accessories and

decorative parts.

Founded in 1993 by Bekir

Ceyhan, Elifoğlu Plastik has

been operating in the furniture

sub-industry for more than 30

years. The company is one of

Türkiye’s leading suppliers in the

production of decorative handles,

legs, fittings, and accessory parts.

Prioritizing quality and customer

satisfaction, Elifoğlu Plastik operates

in a 5,000 m² modern facility with a

strong commitment to sustainable

production principles.

Qualified visitors and fruitful

meetings at IBIA Expo 2025

Participating for the first time in

IBIA Expo 2025, held between

September 23–27, 2025 at the

Istanbul Expo Center, Elifoğlu

Plastik presented its wide product

range and latest collections to

both national and international

industry professionals. Marketing

Specialist Gökhan Alan stated,

“We joined the fair with no specific

expectations, yet meeting such

qualified and relevant visitors was

our most valuable achievement.”

Company representatives

expressed their satisfaction with

the interest shown by visitors from

the Balkans and North African

markets, noting that their products

were appreciated for their aesthetic

design and durability. “We received

numerous sample requests, which

clearly shows that this fair will lead

to tangible business partnerships

afterward,” they added.

Quality, speed, and customer

satisfaction at the forefront

Thanks to its modern production

technologies, Elifoğlu Plastik

ensures fast delivery and

reliable logistics even for highvolume

orders. Operating under

the principle that “customer

satisfaction comes before

everything,” the company

maintains meticulous standards

from production to delivery.

Its product portfolio includes

furniture legs, bed accessories,

phosphor components, pipe and

profile caps, hidden legs, and

furniture handles. Offering a wide

range of materials, colors, and

sizes, Elifoğlu Plastik also provides

customizable models to meet

unique design needs.

Focus on boutique fairs and

sustainable production

According to Gökhan Alan, “IBIA is

a boutique fair with a high-quality

visitor profile. The number of visitors

may be limited, but they are highly

relevant to the industry, and this

structure should be preserved.”

The company also adopts an

eco-friendly production approach,

emphasizing the use of recyclable

raw materials.

A call for ethical competition in

the sector

Board Member Hakan Ceyhan

stated, “There’s enough work

for everyone, but let’s compete

fairly,” highlighting the importance

of maintaining consistent quality

standards. He added that the

Turkish furniture industry has

now reached a production level

comparable to Europe, emphasizing

that “producing cheap goods may

harm Türkiye’s brand image —

quality is what truly strengthens it.”

By making quality, trust, and

innovation its guiding principles,

Elifoğlu Plastik continues to

represent the strength of Turkish

industry in international markets

through its long-standing expertise

in furniture accessories.


95

Profile

Rubateks stood out at IBIA Expo 2025

with its innovative production strength

and export vision

Specializing in knitted mattress fabric production, Rubateks Tekstil

was among the most notable brands at IBIA Expo 2025 with its

high-quality standards, export network spanning 40 countries, and

innovative production approach.

Founded in 2011, Rubateks

has focused on knitted fabrics

for the mattress industry for

the past three years, continuously

expanding its product range. The

company manufactures highquality

fabrics with a modern

machine park, strong production

capacity, advanced technology

infrastructure, and an experienced

team. Its production line operates

with full automation systems,

energy-saving technologies, and

sustainable materials, adopting

an environmentally responsible

production model.

Rubateks follows international

standards in its quality control

processes. Each product is tested

from yarn to the final stage to

ensure durability, breathability, and

aesthetics. With this approach, the

company has built a brand identity

that represents reliability and

consistency in global markets.

Operating entirely on an exportoriented

model, Rubateks

increases its capacity and market

share every year by focusing on

quality, consistency, and customer

satisfaction. Sales and Marketing

Manager Necip Değin said, “We

are a company that exports all

of its production. We are open

to innovation and focused on

continuous improvement. Every

year, we aim to move one step

further.”

Strong presence and positive

feedback at IBIA Expo 2025

Rubateks has been a regular

participant in IBIA Expo since 2022.

At this year’s event, the company

met with existing business partners

and established new connections

in different markets. It attracted

strong interest from visitors from

the Middle East, Africa, the UK,

and the Balkans. “The fair met our

expectations,” said Değin. “The

visitor profile was highly professional.

Türkiye holds a strong position in

the mattress industry, and this event

is important for showcasing our

country’s potential.”

Dynamic strategy for

new markets

Despite the global economic

slowdown, Rubateks has

maintained stable production

and sales, focusing on R&D,

design development, and market

diversification. “Markets may

slow down occasionally, but we

continue creating opportunities

in new regions,” said Değin. “The

Middle East and Africa bring strong

momentum, while we maintain longterm

partnerships with our European

clients.”

Optimistic outlook for 2026 and

sustainable growth

Değin added, “The years 2024 and

2025 have been relatively stagnant,

but 2026 will bring new growth.

The industry will recover slowly but

steadily.” The company plans to

invest in new machinery, expand

its fabric range, and enter the U.S.

market, aiming to increase its export

share to 60%.

With its high-quality production,

innovative vision, eco-friendly

approach, and export-oriented

strategy, Rubateks Tekstil once again

proved itself as one of the most

reliable representatives of Türkiye’s

mattress industry at IBIA Expo 2025.


D-Label showcased quality and

ınnovation in mattress labeling at

IBIA Expo 2025

D-Label strengthens mattress brands’ market presence with highquality

labeling and design solutions.

Kayseri-based D-Label is a

long-established manufacturer

producing mattress labels,

pillow boxes, mattress and pillow

bags, and other complementary

textile accessories. Founded in

1985, the company has extensive

experience in printing and graphic

design and has, in recent years,

successfully expanded its mattress

label production into international

markets.

Company executive Bilal Karakuş

told Sleep Tech, “A mattress gains

its identity through its label before

it ever reaches the user. We make

that identity visible,” summarizing the

brand’s role in the industry.

Consistency and export goals at

the IBIA Expo

A regular participant since the

Sleepwell era, D-Label once again

took its place at the IBIA Expo,

presenting its new designs. Karakuş

emphasized the importance of

the event for both strengthening

relationships with existing clients

and establishing new international

connections. “Visitors come from

both Türkiye and

abroad. We’re using

this platform to expand

our search for new

markets,” he said.

Beyond its role as a

manufacturer, D-Label

stands out for its ability

to provide powerful

visual identity solutions

to brands. The

company’s durable and

aesthetically refined

labels enrich mattress

displays in showrooms

and enhance perceived

product value. Karakuş

also noted that by

combining digital printing with

modern graphic applications, they

help brands create distinctive design

languages. This approach allows

D-Label to offer not just products

but complete corporate identity

support.

Economic challenges and new

market focus

Commenting on Türkiye’s current

economic slowdown, Karakuş

stated, “The domestic

market is expected to remain

tight for some time, so

expanding into new export

markets is essential.” In

this regard, the company is

actively participating in major

international events such as

Dubai Sleep Expo, ISPA in the

USA, and Sleep Expo in the

Netherlands.

With nearly four decades of

experience, D-Label produces

not only products but also

brand value. The company’s

DTM (Direct To Mattress) printing

system marks a new era in label

design, enabling labels to be

applied directly to the mattress.

This innovation reduces production

time and costs while giving the

product a premium appearance —

a significant competitive advantage

for manufacturers.

Suggestions for fair organization

Karakuş also suggested that fairs

should be organized every two

years instead of annually, noting,

“This would be more sustainable for

companies. Avoiding date overlaps

with Dubai and European fairs

would also increase participation.”

Becoming one of the most

influential yet often unseen forces

in the mattress industry, D-Label

continues to combine quality,

innovation, and design to enhance

brand competitiveness both in

Türkiye and worldwide.


97

News

Hybrid foam technologies

minimize pressure points in

mattresses

The combination of memory foam and high-density foam

enhances sleep comfort.

In recent years, foam

technology has undergone

a significant evolution in

the mattress industry, offering

more advanced solutions for

improving sleep quality and

addressing individual comfort

needs. Among these innovations,

hybrid foam constructions—

combining temperature-sensitive

memory foam with a supportive

high-density foam base—have

emerged as a key player.

These systems are engineered

to minimize pressure points,

improve spinal alignment, and

provide long-lasting durability,

meeting the expectations of even

the most demanding sleepers.

Personalized comfort through

advanced layering

The foundation of hybrid foam

mattresses lies in their ability

to adapt to the body’s natural

contours while maintaining

consistent support. Memory

foam, known for its viscoelastic

properties, softens in response to

body heat and pressure, molding

precisely to the sleeper’s shape.

This contouring effect distributes

body weight evenly, reducing

stress on sensitive areas like

shoulders, hips, and lower back.

Beneath the memory foam layer,

high-density polyurethane foam

serves as a stable and durable

base. This combination ensures

that while the top layer offers

plush comfort and adaptability,

the underlying structure

maintains firmness and prevents

sagging over time. The result is a

balance of softness and support

that many traditional foam or

innerspring mattresses cannot

match.

Temperature regulation for yearround

comfort

One of the criticisms of early

memory foam mattresses was

their tendency to retain heat,

leading to discomfort during

warmer months. Modern hybrid

foam technologies address

this issue through advanced

temperature regulation features.

Many manufacturers now

incorporate gel-infused memory

foams, open-cell structures, and

phase-change materials (PCMs)

that draw heat away from the

body and maintain a stable

sleeping temperature.

This innovation allows hybrid

foam mattresses to offer a


comfortable sleep environment

in all seasons, appealing to

consumers who value consistent

comfort regardless of climate.

Pressure relief and spinal

alignment

Reducing pressure points is not

just about comfort—it has a

direct impact on overall health

and well-being. By preventing

the concentration of weight on

specific areas, hybrid foams

can improve blood circulation,

reduce the risk of numbness, and

alleviate discomfort caused by

joint or muscle tension.

Equally important is spinal

alignment. The memory foam’s

contouring works in harmony

with the base layer to keep the

spine in a neutral position, which

is essential for preventing back

pain and promoting restorative

sleep. For side sleepers, the

foam’s ability to cushion the

shoulders and hips is particularly

beneficial, while back and

stomach sleepers benefit from

the base layer’s supportive

firmness.

Durability and sustainability in

foam production

Hybrid foam mattresses are

designed with longevity in mind.

High-density base foams are

resistant to sagging and maintain

their supportive qualities for

many years, often backed by

warranties of 10 years or more.

Additionally, advances in foam

chemistry have led to more ecofriendly

production processes.

Many manufacturers now use

plant-based polyols, water-based

adhesives, and low-VOC (volatile

organic compound) formulations,

reducing the environmental

impact without sacrificing

performance.

Some brands also prioritize

recyclability, ensuring that

components can be repurposed

at the end of the mattress’s

life cycle. This commitment to

sustainability is increasingly

influencing purchasing decisions,

High-density base

foams are resistant to

sagging and maintain

their supportive

qualities for many

years, often backed by

warranties of 10 years

or more. Additionally,

advances in foam

chemistry have led

to more eco-friendly

production processes.


99

News

especially among eco-conscious

consumers.

Market trends and consumer

demand

The growing popularity of hybrid

foam mattresses is closely

linked to broader trends in the

bedding industry. Consumers

are placing greater emphasis on

personalized comfort, wellness,

and sustainable manufacturing

practices. Online mattress

brands, in particular, have

embraced hybrid foam designs

as they can be compressed,

rolled, and shipped directly to

customers without compromising

quality.

Industry analysts predict

continued growth in this

segment, driven by innovations in

foam formulation, customizable

firmness options, and integration

with smart sleep technologies.

Integration with other comfort

systems

Hybrid foam mattresses are

also being paired with other


sleep technologies to enhance

performance. For example,

some manufacturers combine

hybrid foam layers with pocket

spring systems to create hybrid–

hybrid designs, offering the

contouring benefits of foam with

the responsiveness of springs.

Others integrate zoned foam

constructions, where varying

firmness levels are distributed

across the mattress to target

specific body regions.

Adjustable bed bases further

complement hybrid foam

designs, allowing users to finetune

their sleeping position for

optimal comfort and support.

Redefining comfort for the future

As material science continues to

advance, the next generation of

hybrid foam mattresses will likely

feature even more specialized

layers, from antimicrobial

copper-infused foams to

nanotechnology-based cooling

fabrics. Manufacturers investing

in R&D today are positioning

themselves to lead the market

in both performance and

sustainability.

For consumers, the appeal is

clear: a mattress that adapts

to their body, provides lasting

support, regulates temperature,

and aligns with modern

environmental values.

Hybrid foam technologies

are more than just a trend—

they represent a shift in

how the bedding industry

approaches comfort, health,

and sustainability. By combining

the best attributes of memory

foam and high-density foam,

these mattresses deliver a sleep

experience that is both luxurious

and practical, setting a new

standard for the future of rest.

SleepTech • November - December 101

Profile

Marsteks showcased Turkish quality

and strong production power at

IBIA Expo 2025

Marsteks stood out at IBIA Expo 2025 with its extensive experience in

mattress fabric and upholstery textile production.

Operating under Yılmaz

Group, Marsteks has a

fully integrated production

structure, manufacturing mattress

and upholstery fabrics, springs, foam,

yarn, and side borders. The company

also stands out in the upholstery

market with its Belette brand.

Harun Savıran, International

Marketing Executive of Marsteks,

told Sleep Tech, “We’ve been

participating in IBIA since its first

edition. Although we haven’t

expanded our booth, we continue to

maintain a consistent presence and

we’re satisfied with the fair overall.”

Qualified visitors and strong


Participating in IBIA Expo 2025, held

from September 23–27, 2025 at

the Istanbul Expo Center, Marsteks

presented its latest mattress fabric

collections to industry professionals.

Savıran explained, “Most of our

visitors came from the Middle East,

the Balkans, and Western Europe.

Although the visitor numbers were

slightly lower than expected, those

who came were genuinely businessfocused.”

The company attracted significant

attention with its cooling fabric

collections, including the ‘Moonblack’

black cooling fabric, the ‘Hypnos’

series, and the ‘Frozen White’

collection. These lines have secured a

strong position in the new generation

of mattress fabrics that combine

comfort with aesthetic appeal.

Global competition and the strength of

Turkish quality

Savıran highlighted that despite

price pressure from Chinese

manufacturers, Turkish producers

remain committed to high quality. “In

China, lower labor costs can create

a price gap of up to 15–25 cents.

But we don’t just sell a product—we

provide service and trust. Turkish

quality, punctual production, and

reliable delivery are our strongest

assets,” he said.

Fair organization and

industry cooperation

suggestions

In addition to IBIA,

Marsteks regularly

participates in international

exhibitions such as

Heimtextil (Frankfurt),

IMM (Cologne), Interzum

(Germany), Hometex, ISPA

(USA), and the London

Fair (UK).

Savıran noted that

attendance was slightly

lower this year due to

overlapping dates with

Interzum and Intermob

at TÜYAP. “If IBIA were held next

to the Metal Expo area, it would

attract more visitors. People could

visit multiple fairs in one day,” he

suggested.

Industry outlook and future

expectations

Savıran stated that although the

global market is facing challenges,

Turkish textile manufacturers

continue to stand out with their

focus on quality. “It’s a tough

business, but the Turkish textile

industry is resilient. The key is

consistent production and fair

competition,” he emphasized.

With its commitment to quality,

reliability, and innovation, Marsteks

continues to strengthen its

position as one of Türkiye’s leading

representatives in the global

mattress fabric industry.


SleepTech Kasım Aralık 2025

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?