Industrial Solutions Issue 698

INDUSTRIAL

SOLUTIONS UK

www.solutionspublishing.co.uk www.facebook.com/solutionsuknews @Publishing_2016

F

ISSUE 698 • May 2026

UPGRADE OR TRADE-IN

YOUR FREEZE DRYER

WITH BIOPHARMA GROUP*

Do you need to scale-up from R&D to pilot scale to meet your production needs?

Is your Virtis R&D or pilot scale freeze dryer showing signs of aging?

Do you have VirTis machines coming out of guaranteed support?

Don’t compromise your research quality or efficiency, contact Biopharma Group*

See page 21

IN THIS ISSUE

VISIT WEBSITE

Stuart Canvas Group

see page 4

Autrix

see pages 6-7

* UK & Ireland Only

SDH Crisis Management

see page 8

UNISIG LAUNCHES ASSEMBLE-TO-

ORDER PROGRAM FOR UNE GUNDRILLING

MACHINES

see pages 17-19

BUILDING UPDATE

Cirrus Research

see pages IV-V

Contents

Issue 698 • May 2026

WHAT’S INSIDE

5

Amvic

High Performance

Building Systems

9

BUILDING UPDATE

Cirrus Research

Noise & Vibration

Measurement

SolGen Power

Solar Hybrid &

Sustainability

Telecetera

Asset & Facilities

Management

12-13

ESS Aircon

Heating & Cooling

Systems

14

CM Services

Maintenance in

Balance

17-19

UNISIG

Deep Hole

Drilling

20

Menzel GB

Motors

Castle Steel

Buildings

Steel Buildings Focusing

on Warehouse

IV-V

IV

XII

ON THE COVER

Biopharma Group

Editors Comments

Hello & Welcome to Issue 698 of

Industrial Solutions UK!

The team at Industrial Solutions UK has been working extremely

hard to bring you an issue that is full of innovative and exhilarating

companies and we are very excited to share their success and

achievements with you.

We have searched the length and breadth of the UK to bring

you some of the most ground-breaking innovations and this month,

we are overjoyed to be highlighting the activities of Biopharma Group

and Amvic.

Firstly, we would like to focus on the accomplishments Biopharma Group

who this month features on our front cover!

Secondly, we are featuring Amvic with the ‘High Performance Building

Systems’ profile following their impressive performance over the

years. For more information, turn to page 5.

I hope you enjoy reading this issue of Industrial Solutions as much as

we have enjoyed bringing it to you. Happy reading and we hope to see

you for the next edition!

Ian Hayward, Editor

INDUSTRIAL SOLUTIONS UK

Contacts

Editorial

Ian Hayward, Editor

T 0121 725 5267

info@solutionspublishing.co.uk

Accounts

Accounts Manager

T 0121 725 5268

accounts@solutionspublishing.co.uk

Production

Production Manager

T 0121 725 5267

production@solutionspublishing.co.uk

Sponsored by

Industrial Solutions UK is based on

the belief that our customers needs

are of the highest priority and the

utmost importance, with this in mind

our team of highly dedicated staff

work around the clock to make sure

that those needs are always met.

For more information or format

requirements, please see our

Media Pack.

For all advertising & sales

enquiries, please contact Ian

Hayward on: 0121 725 5267, email:


or please visit the website:

www.solutionspublishing.co.uk

Kedel

Kedel Education

XIII

on page 8

FIND US ON:

F

The entire content of this publication is advertorial based.

To place an advertorial or an advert, please call 0121 725 5267.

SCREWS • FIXINGS • FASTENERS

BRACKETS • FOAMS • SEALANTS

ADHESIVES • AND MORE

THE HOME OF

DIY Hardware & Architectural Ironmongery

Four decades of

fastening excellence

s an industry-

supplier of

Aleading

screws, fixings,

and fasteners,

ScrewShop

proudly serves the DIY, hardware,

building, joinery, and furniture

manufacturing sectors, and has built

a strong reputation from a solid

foundation of uncompromising quality,

exceptional customer service, and

extensive industry expertise.

Stocking over 100

product ranges and

thousands of products,

ScrewShop has a

diverse range of both

its own brands alongside

products from well-respected

suppliers. What’s more, ScrewShop

understands the importance of costeffectiveness

without compromising

on quality, which is why it will not be

beaten for price, and rivals some of

the industry’s top contenders.

LOW PRICES UK NEXT DAY

DELIVERY

THE EXPERTS CHOICE

SINCE 1985

SCAN TO VISIT US

ScrewShop is the online evolution

of N E Fasteners, which proudly

celebrated its 40th anniversary

earlier last year. Founded in 1985 by

Nigel Elliott as a small family business,

the company has grown into a

highly successful and trusted name

within the fasteners industry. With

a reputation built on reliability and

a loyal customer base, ScrewShop

continues to uphold the values that

have sustained the business for

over four decades.

ScrewShop is also the home of its

own branded trade used screw

ranges in Rhino and Turboqwik, but

also has the capabilities to partner

with major brands to offer a vast

range of products for any job.

One NEW product now available from

ScrewShop is Spectre Advanced

Timber Fixing Screws, which have a

flat head and are ideal for roofing

and securing sheet metal. ScrewShop

also have a large range of Fixing

Kits, that provide a comprehensive

solution for all your fastening needs

that include screws, plugs, anchors,

and other essential fixings.

With Nigel’s son Matt Elliott now named

as Managing Director, the company is

always looking to innovate and evolve,

and this includes searching for the

latest and newest products.

T 0121 5598866

sales@screwshop.co.uk

https://screwshop.co.uk

Logistics

Your worldwide freight and

logistics partner since 1870

Our mission, quite simply is to satisfy the international freight and

supply chain needs of our clients. This has remained a constant

ambition since our foundation in 1870.

We continue to take pride in providing a professional and awardwinning

portfolio of services that are reliable, time/cost-effective,

and tailored to the unique requirements of our customers. As one

of the first Customs – Authorised Economic Operators in Europe,

our focus on service, compliance and supply chain security has

been acknowledged as market-leading.

Davies Turner Rotherham offer many unique ways to arrange your

shipping requirements. If you have something out of the ordinary,

requires special licences, needs packing, heavy lifting or anything

out of the 'normal,' contact our Rotherham office who will never

refuse to quote on something unusual and will always take on the

challenge.

Contact Us

Catering for all your freight needs

www.daviesturner.com/specialist/rotherham-specialists

T 01709 529709 | F 01709 529710

Email rotherhamsales@daviesturner.co.uk

SDH Crisis Management sponsors this issue of Industrial Solutions UK: see them on page 8 3

Amvic ICF: The fastest growing

modern construction method

A scalable system that helps developers lower costs, reduce

risk and shorten programmes

CF is no longer a niche alternative. Insulated

IConcrete Formwork has become one of the fastest

growing Modern Methods of Construction in the

residential sector, with adoption accelerating steadily

across private, social and affordable housing schemes

– backed by an increasing level of government policy.

In 2025, MMC accounted for 24% of new-build

residential projects in the UK, up from 18% the

previous year. MMC shows no signs of slowing down,

and Amvic ICF is positioned at its centre.

ICF as a system itself is straightforward. Two

panels of extra high-density expanded polystyrene

are held together by structural ties, dry-stacked

to form a wall and filled with reinforced concrete

in a storey at a time pour. The formwork stays

permanently in place, acting as continuous

insulation on both faces. No drying time, no wet

trades waiting on cures, no weather-related

downtime – and ready to meet current energy

standards without additional remedial work.

High Performance Building Systems

Three recent Amvic ICF projects break down

how this modern construction method has been

transforming programmes across the UK and

Ireland.

A 98-unit mixed-tenure housing scheme comprising

semi-detached homes, terraced units and community

facilities demonstrates the benefits of ICF at scale.

Walls were rising at 800mm within two weeks of

breaking ground and eight units reached joist level

within a single week. Over 40,000m² of ICF was installed

across the scheme, finishing on programme.

A phased private housing estate project

delivered by Amvic ICF over 24 months displays

the cost savings that accompany ICF. The modular

installation process removed lead-time dependency,

continuous insulation eliminated cold bridging

entirely and airtightness levels exceeded standard

benchmarks – satisfying Building Regulations and

NZEB requirements without any additional cost.

A four-storey, 20-unit apartment block on a

constrained corner plot with limited access completes

the picture. Lightweight ICF simplified on-site handling,

reduced scaffolding requirements significantly and

removed the need for heavy plant. Foundation to

handover was completed in just 24 weeks.

When eight units can reach joist level in a week, a

98-unit scheme can be delivered at pace and a fourstorey

apartment block is handed over in 24 weeks,

the commercial case becomes difficult to argue

against. Faster programmes mean lower prelim

costs, earlier sales revenue and reduced exposure

to market risk. Amvic ICF brings over two decades

of experience to every project, working closely with

design teams and contractors from early-stage

appraisal through to delivery

to provide safe, cost-effective

and on-time results.

Contact

UK +44 (0)800 058 4377

Ireland +353 1 899 1883

sales@amvicireland.com

www.amvicicf.com


Warehouse & Material Handling Automation

A fully automated warehouse

solution for Wayland Games

The client

Established in 2008, Wayland Games Limited is

Europe’s largest independent retailer for tabletop

hobbies, serving a passionate community of

gamers and collectors across the UK and Europe.

Key challenges

Wayland Games required automation to support

their continued growth and expansion into a new

50,000 square foot facility near Brentwood, Essex.

■ Previous order volumes and capacity constraints

■ Staff walking distances before automation

■ Peak season pressures (e.g., new game

releases, Christmas)

■ Specific pain points with manual processes

■ Error rates or dispatch time issues

Solution

Scaling with confidence

Working closely with Wayland Games, we implemented

an AMR goods-to-person solution integrated with

the Autrix Automation Control System (ACS). The

Precision Grinding

system went live in March 2025,

handling the company’s full range of

tabletop gaming products across

their new facility.

Products are brought directly to

ergonomically designed picking

stations, so operators no longer

need to walk long distances. This

enables faster, more accurate order

processing while reducing physical

demands on warehouse staff.

Following the success of the initial deployment,

Autrix implemented fit-to-size packing automation

in November 2025. This creates right-sized boxes

for each order, reducing packaging waste and

shipping costs.

The new facility reflects Wayland Games’

commitment to sustainability, featuring solar

panels and energy-efficient lighting. ACS supports

this by reducing operational waste through

intelligent order consolidation and optimised

picking routes.

Results

The deployment has delivered measurable

improvements across Wayland Games’ fulfilment

operation.

The Automation Control System (ACS) and

AMR goods-to-person solution now handle the

company’s full product range. The same warehouse

team is processing double the

order volume, with pick rates more

than doubling since go-live.

Orders can now move from

placement to dispatch in 40

minutes. During peak periods, this speed and

consistency gives Wayland Games the capacity

to meet demand without adding headcount.

With fit-to-size packing automation now live,

the operation is positioned for continued growth.

“What sets Autrix apart is their genuine

partnership approach – they didn’t just

install equipment and leave. They’ve worked

alongside us to optimise operations and

ensure we’re getting maximum value from

the investment.” – Richard Lawford MD &

Founder, Wayland Games

Contact Joe Daft,

T 01522 246990

automate@autrix.co.uk

www.autrix.co.uk

Wayland Games:

www.waylandgames.co.uk

The world class engineering manufacture

company with an experience of over 45 years

ultigrind Services Ltd has been specialising in

MPrecision Grinding since 1977 and is a leading

specialist in this field offering a complete end-toend

solutions package that involves a subcontract

grinding service as well as the complete

manufacture of parts and sub-assemblies.

Multigrind, based in a purpose-built 10,000 sq. ft.

facility in Hertfordshire, operates over 40 machines

to serve a diverse customer base across Aerospace,

Defence, Oil & Gas, Motorsport (including Formula

1), Food/Scientific, and medical sectors. Now in

its fourth decade of operation, the company

offers a comprehensive range of services – from

high-volume, ‘lights out’ production to small batch

manufacturing and one-off prototypes – ensuring

no job is too large or too small.

One of its most recent achievements occurred in

2025, upon following successful completion of its

recent EN9100 Rev D initial stage 2 audit (with

zero non-conformances received), Multigrind is

now EN9100 certified.

In an outstanding performance, Multigrind

passed this rigorous audit without a single nonconformance,

reinforcing its dedication to ensuring

it delivers the highest quality CNC Machined

components that meet and exceed the demands

of the aerospace sector.

Martin Wharfe, Operations Director of Multigrind

had this to say about the accolade, “We are

extremely grateful and proud of our team here

at Multigrind Services Ltd for their hard work,

dedication and focus over recent months, ensuring

we succeeded with achieving this accreditation.

We look forward to exploring new opportunities

with current and potential customers within the

Aerospace sector – please contact us to see how

we can assist with your next project.”

This accreditation, combined with ISO 9001:2015

means that Multigrind can offer a complete

package that includes services such as CNC

Turning, CNC Milling, CNC Grinding, Centreless

Grinding and Surface Grinding – alongside various

other services through its supply chain partners

including Surface Treatments/Plating, Heat

treatment, Non-Destructive Testing (NDT), Electrical

discharge Machining (EDM) and Welding among others.

Since the 1970’s, Multigrind has set the bar high with its

grinding capabilities. Whether you’re in need of large

volumes or small batches, Multigrind’s team achieve

highly precise measurements, meeting strict tolerance

requirements across a range of materials including

stainless steel, aluminium, copper and plastics.

Other services worth noting are its Extensive

CNC Turning & Milling services. Built for precision

and efficiency, the Mazak Europe VCS 430A, which

is one of several powerhouse machines in their

Milling department is equipped with Renishaw UK &

Ireland probing for close-tolerance results along

with a 4th axis that combines multiple operations in

a single cycle. In addition, a range of Mazak Europe

Quick Turn 250MSY’s are fully installed with full C

axis capabilities and the latest Smooth G controls

complimented by Hydrafeed Ltd Barfeeds. What’s

more, Multigrind’s powerful CAM processing system

can also seamlessly translate drawings and 3D

models directly into the machines.

Using the latest technology supplied by PSL Datatrack

Ltd to plan and schedule workflow, Multigrind continues

to invest in the future to ensure it has the latest

tools and software to better serve clients, offering

a more cost-effective and time-efficient service.

If you’re interested in finding out more

about its services, please see below:

T 01923 721011

sales@multigrind.co.uk

https://www.multigrind.co.uk

6

Autrix sponsors this issue of Industrial Solutions UK: see them on pages 6-7

Business Crisis Management

Business resilience isn’t optional anymore

n an era defined by volatility, disruption has

Ibecome a constant rather than an exception. From

cyber incidents and supply chain breakdowns to

reputational crises and extreme weather events,

organisations across every sector are being tested

in ways that demand far more than reactive decisionmaking.

The ability to anticipate disruption, respond

decisively, and recover effectively has become a

defining characteristic of successful businesses.

This is where SDH Crisis Management plays a critical

role, helping organisations move beyond theoretical

planning and towards genuine operational resilience.

SDH Crisis Management is built on the understanding

that resilience is not a single plan or document, but

a capability that must be embedded throughout an

organisation. Too often, crisis and continuity plans

exist purely to satisfy compliance requirements,

lacking real-world relevance when an incident

unfolds. SDH challenges this approach by working

closely with leadership teams to ensure that

resilience strategies are practical, proportionate,

and aligned with the realities of how organisations

operate. The result is preparedness that can be

relied upon when pressure is at its highest.

Central to SDH’s work is the integration of crisis

management and business continuity. While distinct

disciplines, both are essential to navigating disruption

successfully. Crisis management focuses on responding

to high-impact events that threaten people, operations,

or reputation, often under intense time pressure and

scrutiny. Business continuity ensures that critical

activities can continue, or be rapidly restored, even

as disruption unfolds. SDH’s methodology recognises

that these functions cannot operate in isolation.

Instead, they must complement one another, forming

a cohesive framework that supports decisionmaking

before, during, and after an incident.

A key strength of SDH’s approach lies in its emphasis

on understanding risk in context. Rather than

relying on generic risk registers, SDH conducts

structured assessments that examine how threats

intersect with an organisation’s specific objectives,

dependencies, and operational realities. Through

detailed business impact analysis, organisations

gain clarity on which functions are truly critical,

how long they can tolerate disruption, and

where vulnerabilities exist across supply chains,

technology, people, and facilities. This clarity allows

leaders to prioritise resources effectively and

focus attention where it matters most.

When incidents do occur, SDH provides hands-on

support to organisations navigating the early

stages of disruption. In moments where time is

limited and information is incomplete, experienced

guidance can be invaluable. SDH supports

leadership teams by helping to structure decisionmaking,

manage information flow, and maintain

focus on priorities such as safety, operational

stability, and stakeholder confidence. This

practical involvement helps organisations stabilise

situations more quickly and reduces the risk

of secondary impacts caused by confusion

or miscommunication.

Recovery is treated not as an afterthought, but as

an essential phase of resilience. SDH’s work extends

beyond restoring operations to pre-incident levels,

focusing instead on learning and improvement. Every

disruption presents an opportunity to strengthen

systems, refine plans, and address weaknesses

that may not have been visible before. By supporting

organisations through structured post-incident

reviews and recovery planning, SDH helps ensure

that lessons are captured and embedded, rather

than forgotten once immediate pressures subside.

What’s more, standards and frameworks play an

important role in this process, particularly for

organisations operating in regulated environments.

SDH supports clients in aligning with recognised bestpractice

standards such as ISO: 22301 for business

continuity management. This not only enhances

operational robustness but also demonstrates

assurance to regulators, customers, and partners.

Beyond formal certification, SDH promotes broader

principles of organisational resilience, recognising

that leadership, culture, and adaptability are just as

important as documented procedures.

What ultimately distinguishes SDH Crisis Management is

its partnership-driven approach. Rather than delivering

off-the-shelf solutions, SDH works collaboratively with

organisations to develop strategies that reflect

their size, sector, and risk appetite. This tailored

approach ensures that resilience measures are

realistic and sustainable, embedding preparedness

into everyday decision-making rather than treating

it as a separate or occasional activity.

For more information, please see below:

T 07717 226379

info@sdhcrisismanagement.co.uk

https://sdhcrisismanagement.co.uk

8


Smarter job scheduling

he Telecetera team carry a

Tgreat depth of experience

that comes unrivalled in

the tech sector. Originally

providing early mobile phone

billing software, as well

as software development

services, 25 years ago, the

company released its first IT solution for the

mobile workforce management and field service

software sectors.

Telecetera software replaces paper forms,

spreadsheets, and legacy software with modern

Enterprise Applications and Mobile Apps. One of its

most popular products is its Connect Software,

which is used by hundreds of clients daily, to schedule

and track jobs that mobile operatives work on.

The Connect product is trusted across a wide range

of industries and professions, including property

maintenance teams, facilities managers, housing

associations, telecom installers, retail maintenance

teams, air conditioning engineers, emergency callout

contractors, and many other trades.

Connect offers an easy and efficient way to

assign jobs and co-ordinate tasks across your

entire workforce. With the combined power of

the Scheduler and Mobile App, your team receives

real-time job updates and data – keeping everyone

connected and informed.

The product features a clean, modern interface

that’s simple to navigate and built with the latest

technologies. Say goodbye to mountains of

paperwork – Connect enables a fully paperless

maintenance and service operation, so you won’t

need forms or spreadsheets ever again.

Connect also includes a powerful,

intelligent Job Scheduling engine

that ensures the right operative,

with the right skills and materials,

arrives at the right location at

the right time. Its fast-routing

capabilities, powered by Microsoft

Azure Maps, help optimise travel

routes and minimise time spent on the road. Simply

select a group of operatives and a list of jobs –

Connect’s AI-driven scheduling will automatically

plan and assign tasks for you.

ConnectManager seamlessly sends all updates

to an intuitive Mobile App – ConnectMobile. The

Connect product consists of ConnectManager aka

‘the scheduler’ and ConnectMobile, the mobile app,

which allows your Engineers to upload photos of

the job and assets, while automatically recording

time spent on-site.

In addition, Connect offers open APIs, allowing

seamless integration with third-party systems –

with no vendor lock-in. Telecetera also offers complete

flexibility with no enforced minimum contract terms,

giving customers the freedom to switch to alternative

platforms if their needs evolve or if they are acquired

by an organisation using a different solution.

Communications and collaboration are two of

Telecetera’s core values, “We answer the phone,

work in the office full-time, and respond to ideas

and suggestions from clients about how the

product could be improved,” stated Steven

Borwell-Fox, Managing Director.

For further information about Connect:

T +44 (0)1905 612220

www.telecetera.co.uk

Asset & Facilities Management

Your Field Service Management Software solution

For the team at Telecetera, IT, mobile workforce management, and field service

software are lifelong passions. When we released our first IT solution 25 years

ago, mobile phones were still a novelty; they certainly didn’t fit in your pocket!

Our depth of experience sets us apart from the competition, giving us an

intuitive grasp of the ways that mobile field service software can be used

to improve performance right field service management software for your

organisation.

Field Service Management Software

Once you have introduced a field service management software solution it will

quickly become a critical part of how your organisation operates.

Job Management & Tracking

Connect is technically robust, well proven, and it works – as proven by all our

existing customers in numerous sectors.

telecetera.co.uk | +44 (0)1905 612220


Instrumentation Valves & Pump Valves

Valves for gas modular

skid applications in

upstream gas operations

liver Valves

Ocontinues to

support upstream gas

developments through

the supply of highperformance

valves

for gas modular skid

applications installed

at gas wellheads. These

modular skid packages

form a critical part

of modern upstream

infrastructure, providing compact,

efficient control of high-pressure

gas streams in challenging operating

environments.

Gas modular skids are designed to

integrate multiple process and safety

functions within a single, transportable

unit. Valves used within these systems

must deliver absolute reliability, precise

control and long-term durability.

Oliver Valves supplies engineered

valve solutions specifically developed

to perform consistently within

these demanding gas modular skid

applications.

Our scope of supply includes API

6A-compliant choke valves, engineered

to operate as part of fully integrated

gas modular skid systems. These valves

are typically installed alongside High

Integrity Pressure

Protection Systems

(HIPPS), Wellhead

Shutdown (WSD) panels,

Emergency Shutdown

(ESD) systems and

Remote Terminal Unit

(RTU) panels. Integration

with fire and gas

detection systems and

chemical injection units

further reinforces the

need for dependable valve performance

under all operating conditions.

All valves supplied for gas modular skid

projects are designed, manufactured

and tested in accordance with API 6A

requirements. This ensures robust

construction, resistance to high

pressures and temperatures, and

consistent performance throughout

the operational life of the asset.

Where required, safety-related

instrumentation associated with valve

actuation and shutdown functions can

be supplied with SIL 3 certification,

supporting the highest levels of

functional safety and risk mitigation.

Contact

T +44 (0) 1565 632636

sales@valves.co.uk

https://www.valves.co.uk

High-pressure needle

valve supplied for

offshore Brazil application

liver Valvetek has

Osupplied a 1/2-inch

bore, 15,000PSI medium

duty needle valve for a

subsea project supporting

offshore operations off

the coast of Brazil for

Petrobras.

The valve was specified

for a high-pressure

subsea instrumentation

application where

pressure containment,

material integrity, and

long-term reliability are

critical. Designed and

manufactured in the UK, the

valve has been engineered

to perform in harsh subsea

environments, where

intervention opportunities

are limited and operational

reliability is essential.

Despite its compact footprint, the

valve provides robust performance

under extreme pressure conditions,

supporting precise control within the

subsea system. Material selection,

machining tolerances, and testing

regimes were aligned with the demands

of subsea service, ensuring consistent

performance and durability throughout

the design life.

This supply forms part of Oliver Valves’

ongoing involvement in global subsea

projects, delivering British-engineered

valve solutions for some of the most

challenging operating environments

in the energy sector.

Contact

T +44 (0)1565 632636

sales@valves.co.uk

https://www.valves.co.uk

10


Industrial Emission Monitoring & Gas Manufacturing Control

ECO PHYSICS AG develops new three-channel

chemiluminescence analyser (NO/NO 2

/NH 3

)

CO PHYSICS AG offers innovative analytical

Esolutions for measurement tasks in the fields

of environment, health and process control.

Using its vital expertise and technology to

contribute towards environmental preservation,

human health, and industrial innovation,

ECO PHYSICS’ interdisciplinary research and

development team work tirelessly to deliver

the best customer orientated and tailor-made

products and services for the industry.

Founded in 1990 through a management buyout,

ECO PHYSICS stands strong today as an

independent Swiss shareholder’s company

with an active board of members who are

committed to the future growth and success

of the company. We spoke to Dr. Grischa Peter

Feuersänger, Head of Sales & Marketing who

explained how the past 12 months have fared.

“We have received a positive recovery post

pandemic. Many public projects were reopened

which generated a lot of opportunities for

new references. The war in East Europe is a

new tough challenge to overcome, especially

for companies that rely almost completely on

importing parts and exporting their finished

products. But the main challenge for all of us

has particularly been the manufacturing costs,

shipping routes and exchange rates. Since 2022,

we have used this time to expand our product

portfolio and modernise our production line. New

staff has been hired for production and R&D, and

we have rearranged the supply chain due to the

rise in production costs. We have adapted our

yearly forecast to cater to this, we know it will

be hard, but optimisation is our current goal.”

Knowing there is no quick fix to economic

changes, ECO PHYSICS is determined to continue

innovating and has developed a new threechannel

analyser based on chemiluminescence.

As an upgrade from the The nCLD AL2, The

nCLDAL3/8555 CY analyser is the next generation

in high precision nitrogen oxide measurement.

Unique in speed and reliability, the nCLDAL3/8555

CY is modular designed and capable of

simultaneously NO, NO 2

, NO X

, NH 3

and NOX-Amines.

The new and intuitive graphical user interface

also individually displays and connects to other

instruments’ data.

Overall stability and reliability are lifted to a

new level. The optional electro-mechanical

bypass system balances out even the fastest

of pressure variations occurring in the sample

flow. Furthermore, the analyser is adaptable

to numerous non-standardised applications

and the calibration of the unit runs quickly and

automatically with all necessary data available

anywhere at any time. Its user friendly, compact,

modular, and intelligent hosting its own CPU

whilst enabling interaction with other CPUs by

BUS-communication.

Additionally, ECO PHYSICS has also been developing

upgrade kits for all its existing products to

help counteract some of the problematic

complications the supply chain has caused. “We

have used this chance for some substantial

upgrades in hardware, software and gas flow

controls,” added Dr. Grischa Peter Feuersänger.

Going forward, ECO PHYSICS is excited to

continue working on optimising production

workflow whilst simultaneously expanding

its current portfolio and developing new

technologies.

In closing, we asked Dr. Grischa Peter

Feuersänger how the company felt receiving

our award. He responded, “We are extremely

honoured to be nominated, thank you.”

Contact

T +41 55 220 22 22

info@ecophysics.com

https://www.ecophysics.com


Heating & Cooling Systems

How ESS is

transforming

commercial heating

and cooling

n this issue of Industrial Solutions, we are pleased

Ito feature ESS Air Con as our Heating & Cooling

Systems Company of Choice.

Established in 2000, ESS has evolved from a

specialist HVAC distributor into the UK’s leading

supplier of commercial heat pump systems.

Partnering with global brands such as Samsung

and Panasonic, alongside innovative manufacturers

including Maxa and Volta, ESS delivers tailored, highperformance

solutions to meet the complex needs

of modern commercial environments.

The demand for heat pumps across commercial

and industrial sectors continues to accelerate,

driven by the global push toward decarbonisation

and net zero targets. In both the UK and Europe,

government policy and corporate sustainability

commitments are reshaping the heating landscape.

As organisations transition away from gas

and other fossil-fuel systems, ESS stands at

the forefront – providing efficient, low-carbon

alternatives that enable businesses to reduce

emissions, cut operating costs, and future-proof

their operations.

Over recent months, ESS has intensified its focus

on deploying large-scale heat pump systems for

commercial and industrial properties – including

offices, warehouses, and manufacturing facilities.

With a deep understanding of the operational

demands and environmental challenges unique to

these sectors, ESS helps organisations enhance

building energy performance and transition

seamlessly to low-carbon heat pump technology. In

doing so, the company enables clients to cut energy

costs, improve efficiency, and meet their ESG and

sustainability commitments.

In the industrial and logistics sectors, the shift is

already underway. Businesses operating lowtemperature

industrial processes, distribution

centres, and temperature-controlled warehouses

are increasingly investing in large heat pump systems

– achieving measurable gains in energy efficiency,

long-term cost reduction, and carbon footprint

reduction.

Maxa Heat Pumps represent one of ESS’s most

recent strategic partnerships, bringing cuttingedge

heating and cooling technology from Italy to

the UK. Manufactured by the Ferroli Group, Maxa

products are imported and distributed across the

UK, offering industrial, commercial, and residential

clients high-performance climate control solutions.

Founded in 1992 by Luciano Tredicesimo Ferroli, the

company has grown into one of Italy’s top five heat

pump manufacturers and a leading player in the

domestic air conditioning sector. Today, Maxa is

recognised globally for its expertise in residential,

commercial, and industrial air conditioning solutions.

At the core of Maxa’s mission are environmental

comfort, sustainable growth, and ecological

responsibility. These values underpin every stage

of their design and production processes, ensuring

that each system delivers efficiency, reliability,

and long-term value.

Maxa’s versatile portfolio of heating and cooling

solutions can be applied across a wide range

of environments – from domestic homes and

commercial offices to public facilities – whether

for new-build projects or retrofits. With a

comprehensive selection of heat pumps, Maxa

provides reliable, adaptable solutions tailored to

every installation requirement.

Through ESS, these advanced systems can be supplied

and installed wherever high-quality climate control

is needed – from cold, temperate environments to

tropical conditions – ensuring environmental comfort

and human wellbeing wherever they are deployed.

ESS is also recognised for its deep expertise and

extensive product knowledge across a wide range of

air source heat pumps and air conditioning systems.

Companies looking to transition to advanced

heating and cooling solutions often face the

challenge of sourcing skilled installers and

maintenance engineers. ESS recognises that

integrating new systems into commercial buildings

– particularly older properties – can be complex.

That’s why the company invests heavily in customer

support and comprehensive training programs.

A key challenge across the industry is the

shortage of qualified installers and technical

expertise. ESS addresses this through its ongoing

installer training programs for heat pumps,

equipping professionals with the skills needed to

optimise system performance. By partnering with

businesses, ESS ensures that organisations get

the maximum efficiency and reliability from their

heating and air conditioning systems.

Its highly skilled technical team supports both

complex industrial installations and standard

commercial applications, ensuring businesses

benefit from seamless access to the latest

high-performance, energy-efficient technologies.

Through strong partnerships with leading brands

such as Maxa, ESS consistently delivers cuttingedge

solutions to the UK market.

Beyond supply, ESS provides end-to-end support,

including pre-sales consultations, expert system

design guidance, comprehensive after-sales technical

assistance, and some of the industry’s most respected

ongoing training programs. With a strong commitment

to low-carbon and eco-friendly solutions, ESS is helping

businesses – one heat pump at a time – to achieve and

exceed their net zero and ESG objectives.


T 0845 880 5862

sales@essaircon.com

https://essaircon.com

12


BUILDING UPDATE

ISSUE: 698 May | www.solutionspublishing.co.uk

SolGen Power

see them on.....IV

Mudfords

see them on.....VII

DCON Safety Consultants

see them on.....IX

Moore Concrete

see them on.....XIV

Service Sealing Solutions

see them on..XVII-XVIII

Checkedsafe

see them on.....XXII

F

www.facebook.com/solutionsuknews |

@Publishing_2016

Contents

Issue 698 • May 2026

WHAT’S INSIDE

IV-V

Cirrus Research

Noise & Vibration

Measurement

IV

SolGen Power

Solar Hybrid &

Sustainability

VIII

Baqus Group

Construction & Property

Consultancy

IX

DCON Safety

Safety

Consultancy

X

Independent

Access Sales

Platform Lifts

XII

Castle Steel Buildings

Steel Buildings Focusing

on Warehouse

XIII

Kedel

Kedel Education

XIV

Moore Concrete

Precast Concrete Products

XV

X2 Consult

Expert Safeguarding &

Child Protection Services

XVII-XVIII

Service Sealing

Solutions


ON THE COVER

LSA Projects

Editors Comments

Hello & Welcome to Issue 698 of

Building Update!

The team at Building Update has worked tirelessly to bring you

an edition packed with innovative and inspiring companies, and we are

delighted to share their achievements and success stories with you.

After searching across the UK for the latest ground-breaking

innovations, we are thrilled this month to showcase the outstanding

work of LSA Projects and SolGen Power.

First, we turn the spotlight on the remarkable accomplishments of

LSA Projects, proudly featured on this month’s front cover.

We are also pleased to feature SolGen Power in our ‘Solar Hybrid &

Sustainability’ profile, recognising their exceptional performance and

continued growth over the years. To find out more, turn to page IV.

We hope you enjoy reading this issue of Industrial Solutions as much

as we have enjoyed creating it for you. Happy reading, and we look

forward to welcoming you back for the next edition!

Ian Hayward, Editor

BUILDING UPDATE

Contacts

Editorial

Ian Hayward, Editor

T 0121 725 5267


Accounts

Accounts Manager

T 0121 725 5268

accounts@solutionspublishing.co.uk

Production

Production Manager

T 0121 725 5267

production@solutionspublishing.co.uk

Sponsored by

on page XIV

Building Update is based on the belief

that our customers needs are of

the highest priority and the utmost

importance, with this in mind our

team of highly dedicated staff work

around the clock to make sure that

those needs are always met.

For more information or format

requirements, please see our

Media Pack.

For all advertising & sales

enquiries, please contact Ian

Hayward on: 0121 725 5267, email:


or please visit the website:

www.solutionspublishing.co.uk

FIND US ON:

F

The entire content of this publication is advertorial based.

To place an advertorial or an advert, please call 0121 725 5267.

Haymarket Square Buildings

2 and 3: Gustafs Linear Rib

Acoustic Wall & Ceiling Products

Architect: Foster and Partners

Installer: MMM Joinery

Quantity: 2,000m 2

Specification: 38mm x 28mm and 22mm deep

ribs in Natural Oak veneer with 38mm gaps.

s part of the major Haymarket project

Ain Edinburgh, LSA supplied over 2,000m 2

of Gustafs Linear Ribs to the atrium space

between Buildings 2 and 3 of Haymarket

Square. Haymarket Square is a key part of

the commercial arm of the scheme by the

estate developers LSA worked with for the

Quartermile Edinburgh futures project in 2022.

This development spans 4 acres of commercial,

leisure, and retail space including 400k m 2 of

office space and 2 landmark hotels.

The rib system from LSA was specified by

masterplan architects Foster and Partners

for its acoustic performance and industry

leading resistance to fire classification.

Gustafs Linear rib in this format fixed with

38mm gaps achieves an impressive Class A

acoustic performance with minimal additional

acoustic mounting depth required. Ribs were

mounted in huge bays of up to 4m, arranged

vertically along life cores and horizontally

to balustrades around the atrium for an

elongating effect. Rib joints were staggered to

give the appearance of full length pieces and

the installation team from MMM did a great job

fulfilling this visual illusion.

In public areas like atriums and lift lobbies and

especially in high-rise modern developments,

fire safety is key and using products that will

impede the spread of flames is paramount.

Alongside all other products manufactured by

Gustafs top performance in the event of a fire

is a key selling feature especially when working

with timber products. Gustafs ribs achieve

Euroclass B, s1-d0 for spread of flames, smoke

production, and flaming droplets which makes

them one of the best performing timber

cladding materials on the market. This is lead

by their unique gypsum particleboard core

which is almost completely non-combustible

and stable in the event of fire; coupled with

their patented Capax mounting profiles the

system has been tented to be self sufficient

in the event of a fire and even to protect

supporting structure behind the installation.

LSA also worked on leased areas inside

Haymarket B4, supplying both linear ribs

and Gustafs panel system to staff areas,

lecture theatres, and lift lobbies.

Contact

T 01376 501199

rwarder@lsaprojects.co.uk

https://www.lsaprojects.co.uk

LinkedIn Experience Centre, Farringdon

Architect: Ab Rogers Design

Installer: Denne Joinery

Quantity: 160m 2 Ribs and 200m 2 Panels

Spec: Maple Veneered Acoustic and Non-Acoustic

Panels and Red Painted Ash Veneered Ribs

SA projects are proud to have contributed two

Lour of acoustic products to the new LinkedIn

Experience Centre in Farringdon, the centre is a multiuse

events space designed to bring the professional

networking platform to life. The Experience centre

houses a events and conference theatre as well

as meeting spaces and hybrid working facilities for

staff and members. The design needed to be sleek

and intuitive using the best products available to

share the brand’s vision and ethos.

The acoustic panel system supplied by Gustafs was

used in both the theatre space and main entrance.

Multiple acoustic perforation patterns were applied

to the Maple veneered panels for an interesting and

dynamic texture on the walls. In the lecture theatre

a combination of PH5 and PD8 perforations were

used for both linear and offset round apertures,

both providing Class B acoustic performance.

Behind the reception desk panels were completed

with nano perforations – a unique pattern which

combines high-density performance rear holes with

an almost invisible microperforated face veneer.

Gustafs Linear ribs were used to clad the exterior

drum of the lecture theatre including the standout

moving-wall style doors on each side of the

space. This product is a versatile system which

lends itself to variable installations like this. With

a simple support structure (designed to house it’s

own acoustic fleece) it can be applied to flat and

curved surfaces on walls and ceilings, as well as to

doors and hatches without sacrificing any tested

metrics including fire and acoustic performance.

Designers chose to use natural Ash veneer as a

base for the signature red paint; this combination

gives a stand-back bold appearance whilst retaining

the natural texture of the timber when viewed

closely. The linear rib elements are also used as an

acoustic tool, combined with Gustafs’ high density

mineral wool the module build up achieves Class

C performance with minimal additional mounting

depth which is ideal to add enough sound dampening

to breakout spaces like this one.

T 01376 501199

rwarder@lsaprojects.co.uk

https://www.lsaprojects.co.uk

DCON Safety Consultants sponsors this issue of Industrial Solutions UK: see them on page IX

III

Noise & Vibration Measurements

Revolutionising noise monitoring in factories and

warehouses: The power of cloud-connected solutions

n fast-paced industrial environments, noise is

Ian unavoidable by-product of operations. From

heavy machinery and conveyor belts to forklift

trucks and automated systems, these workplaces

generate significant levels of noise that, if left

unchecked, can post serious health risks to

workers. Effective noise monitoring is not just a

compliance requirement, it is a critical component

of occupational health and safety, ensuring a safer

and more productive workplace.

The Risks of Industrial Noise Exposure

Prolonged exposure to high noise levels can lead to

irreversible hearing damage, increased stress, and

reduced concentration, which in turn can heighten

the risk of workplace accidents.

The Health and Safety Executive (HSE) outlines strict

regulations under the Control of Noise at Work

Regulations 2005, mandating employers to assess

and manage noise exposure to protect employees.

Failure to adhere to these regulations can result

in legal repercussions, reduced productivity and

output, heightened absenteeism due to noiseinduced

health conditions, and even fines for

your organisation.

Quantum Indoor; The Ideal Solution

For businesses looking to enhance their noise

monitoring practices, the Quantum Indoor from

Cirrus Research offers an innovative and highly

effective solution. Designed specifically for indoor

environments such as factories, warehouses, and

manufacturing plants, Quantum Indoor provides

real-time noise monitoring with precision and ease.

Key features of Quantum Indoor:

S Continuous Monitoring: The device operates

24/7, capturing noise data throughout the day

to help identify problematic noise sources and

trends.

S Cloud Connectivity: Data is accessible

remotely via the cloud, allowing health and safety

managers to monitor noise levels from any

location.

S Custom Alerts: Quantum Indoor can be

configured to send instant notifications when

noise levels exceed safe thresholds, enabling

swift corrective action.

S Seamless Compliance: The system simplifies

compliance with HSE regulations, providing

accurate data and reporting tools essential

for audits and risk assessments.

Find out more about the Quantum Indoor on

the Cirrus Research Website today!

The Benefits of Cloud-Connected Monitoring

One of the standout features of Quantum Indoor

is its cloud-connected monitoring, which brings a

Solar Hybrid & Sustainability

Sustainable off-grid power

is no longer a trade-off

range of benefits to businesses operating in noiseintensive

environments.

S Remote Access to Data: With real-time

noise level tracking accessible from any device,

managers no longer need to be physically

present to monitor conditions.

S Improved Decision-Making: Historical noise

data and trend analysis help businesses make

informed decisions on noise control strategies

and equipment use.

S Automated Alerts & Reporting: Instant

notifications enable swift corrective actions,

while automatically generated reports simplify

regulatory compliance and auditing.

S Scalability: Cloud-connected systems can

be deployed across multiple sites, providing a

centralised view of noise levels across different

facilities.

S Reduced Downtime: By proactively identifying

and addressing noise issues, businesses can

minimise disruptions and maintain efficient

workflows.

By leveraging cloud technology, Quantum Indoor

enhances traditional noise monitoring, offering a

smarter, more efficient way to manage workplace noise.

Need more convincing?

Take a look at our cloud demo to discover

how easy noise monitoring can be!

For more information, please visit:

www.cirrusresearch.com or contact

us at: sales@cirrusresearch.com.

cross construction, infrastructure and

Atemporary works, the expectations placed

on-site power have shifted. Cost remains critical,

but so do noise constraints, emissions targets,

ESG reporting requirements and the practical

reality that many locations simply do not suit

constant generator running. In that context,

the conversation is moving from ‘how do

we power this site?’ to ‘how do we power it

efficiently, quietly and with provable outcomes?’

Hybridisation is the clearest step-change. By

combining solar generation, lithium battery

storage and an intelligent backup generator

in one integrated system, modern hybrid power

reduces fuel burn without compromising uptime.

The key point is operational control: when the

system is genuinely ‘solar-first’ and demandmatched,

the generator becomes an occasional

support asset rather than a 24/7 necessity.

The result is fewer refuelling visits, reduced

maintenance exposure, lower noise and

immediate cost impact.

At SolGen, the focus has been on building

a mobile, off-grid solution that maximises

renewable contribution in real conditions, not

only in idealised demonstrations. Our ‘Sunflower’

tracking approach is designed to harvest more

energy than fixed arrays by automatically

optimising panel pitch and direction as the sun

angle changes, with bifacial technology to further

increase capture. In practical terms, this can

materially increase solar yield compared with

static systems, and that yield directly translates

into reduced generator runtime and fuel

consumption.

For many sites, the economics are now difficult

to ignore. When this power system can cut

fuel costs by up to £1,000 per week versus a

traditional diesel generator setup, while also

enabling substantial carbon reduction, hybrid

power becomes a commercial decision as much

as a sustainability one. SolGen systems are built

to generate the reporting that procurement

teams and ESG leads increasingly need: remote

monitoring, real-time and historical performance

data, fuel and CO 2

saving outputs, and exportable

reporting for audits and sustainability

submissions.

The direction of travel is clear. Sites that adopt

intelligent hybrid power early are not only

reducing emissions; they are stabilising operating

costs, improving working conditions, and derisking

compliance. The future of temporary

off-grid power will be defined by systems that

deliver measurable outcomes, automatically,

day after day.

Contact

T 01778 300394

sales@solgenpower.co.uk

www.solgenpower.co.uk

IV

Moore Concrete sponsors this issue of Industrial Solutions UK: see them on page XIV

Measuring

Noise in the

Construction

Industry

Nationwide Construction

Consultancy Services

Baqus provide construction consultancy

services to sectors including:

Hospitality • Healthcare • Residential

Industrial • Arts • Commercial • Leisure

Baqus are an award winning, forward thinking business striving for

continued success. We offer a customer focussed service through continuous

in-house improvements and we deliver efficiencies and added value to all

projects undertaken.

Our Services:

Cost Management • Project Management

Building Surveying • Employer’s Agent

CDM Advisor • Principal Designer

Our offices

Birmingham

Suite 01a, Somerset House, 37 Temple Street

Birmingham B2 5DP

0121 312 1141

London

2/3 North Mews, London WC1N 2JP

020 7831 1283

Canterbury

The Rear Office, 114 High Street, Herne Bay, Kent CT6 5JY

01227 471700

Chichester

Chichester Enterprise Centre, Terminus Road, Chichester,

West Sussex PO19 8FY

012 4379 2220

Liverpool

Quantum House, 23 Roscoe Street, Liverpool L1 2SX

0151 708 5896

Manchester

44 Manchester Road, Chorlton, Manchester M21 9PH

01618 815216

Visit our website to find your local office

baqus.co.uk

Leaders in Built Environmental

Safety and Health and

Wellbeing Consultancy

Consulting on various aspects of project design,

constructability and operational lifecycle matters for

local and global commercial clients.

DCON Safety Consultants is committed to understanding the specific

needs, goals, and desires of each individual client and project. Upon

gaining this special understanding, we commit ourselves to the

implementation of a design and construction management plan that will

meet or exceed these requirements. Our foundation for each project is

honesty, integrity, trust, and professionalism.

OUR SERVICES

– DESIGN SUPERVISOR

– PLANNING COMPLIANCE

– CONSTRUCTION HEALTH & SAFETY

– HEALTH & SAFETY STRATEGY

– EXPERT WITNESS

Please visit: www.dconsafety.com

Email info@dconsafety.com • Phone +353 (0)1 611 1556

DCON Safety Consultants, Suite 5, Fitzwilliam Square East, Dublin 2

Steel Buildings Focusing on Warehouse

Steel solutions, engineered for the future

astle Steel Buildings is proud to be one of the

CUK’s leading suppliers of steel and portal frame

buildings. Based in Yorkshire, the company designs

and delivers bespoke solutions for a wide range of

applications – from private garages and workshops

to agricultural, commercial, and industrial buildings.

Serving the commercial, leisure, equestrian,

and farming sectors, Castle Steel Buildings is

committed to providing durable, low-impact

structures built to stand the test of time.

The company continually tests its systems to

ensure it remains at the forefront of the steel

building industry. All buildings meet – and exceed –

British Standards BS6399 and ISO: 9001:2000, giving

customers confidence that their structures are

designed to withstand even the most challenging

environments and climates.

Why steel?

Steel buildings are highly regarded for their

strength, flexibility, and sustainability. Their ability

to be shaped into a wide range of forms makes

steel the material of choice for bespoke, versatile

designs. Unlike wood, steel does not rot, warp, or

degrade when exposed to moisture or pests, ensuring

long-term structural integrity. Additional protection,

such as galvanisation and specialist coatings,

further enhances resistance to corrosion and rust.

With fire safety a top priority across the

construction industry, Castle Steel Buildings

designs structures that fully comply with fire

protection and thermal insulation regulations,

offering clients reassurance

and peace of mind. Every

building carries an accredited

CE mark, ensuring robust

performance in even the most

challenging environmental and

climate conditions. In terms

of sustainability, precision

engineering minimises waste

and creates structures with built-in longevity –

requiring minimal maintenance for years to come.

When it comes to constructing safe and durable

steel buildings, Kingspan Quadcore insulated panels

excel. Whether it’s an agricultural facility, industrial

unit, or commercial space, they ensure that your

building can withstand fire hazards by offering

a level of fire protection that sets them apart

from traditional materials. Noted as the smartest

choice for those seeking safety,

durability, and compliance in their

steel buildings, Kingspan Quadcore

is a next-generation insulated panel

core material that is made using a hybrid closedcell

structure that ensures outstanding thermal

performance and, crucially, superior fire resistance.

Established in 2017, Castle Steel Buildings offers a

comprehensive turnkey service covering design,

manufacture, and installation through its trusted

distributor network. All steel frame buildings

are designed in-house and engineered to meet

stringent British building codes and regulations.

In addition to supplying bespoke structures, the

company provides a leading in-house installation

service, delivered by a skilled team of fitters and

installers. Castle Steel Buildings also offers expert

guidance on groundwork requirements and supplies

full structural calculation packs tailored for

specific building control applications.


T 01302 301402

www.castlesteelbuildings.co.uk

XII

LSA Projects sponsors this issue of Industrial Solutions UK: see them on page III

Kedel Education

Recycled plastic educational furniture

maintenance-free outdoor classroom products

sing Recycled Plastic Wood and Recycled Mixed

UPlastic Lumber collected from UK Homes and

Businesses – Eco friendly and Sustainable

Recycled plastic lumber or recycled plastic

wood, is made from taking your waste plastic and

processing it for reuse. 66% less energy is needed

than is required in production of virgin plastic, and

it releases a whopping 250% less carbon dioxide.

We turn this recycled plastic into aesthetically

pleasing, useful products, for the general public,

construction companies, local authorities, educational

institutions and hospitals all over the world.

All our products are recycled as well as being recyclable.

This is the ideal of recycling. It’s a closed loop.

All the plastic products we use as consumers

should be capable of recycling indefinitely making

for a sustainable future for our children and a

cleaner less toxic environment.

In some cases we also reuse rather than recycle.

For example, we have a Recycled Plastic

Compost Tumbler/Compost Bin –

appropriately named, ‘The Compost Creator.’

For this we reuse a food grade plastic drum

previously used to transport food products.

Reuse is vastly superior to simply recycling

There is no significant consumption of energy, as

there is no manufacturing process involving heavy

use of energy. We just drill a few holes in the drum

and clean it up as best we can.

Both recycling plastic as well as

reusing it keeps large amounts of

plastic waste out of expensive and

now difficult to find landfill.

This results in a lower carbon footprint and

reduced human contribution to global warming and

climate change.

Recycled Mixed Plastic Lumber, recycled HDPE and

recycled polystyrene (which is the primary waste

plastic in our recycled plastic wood or recycled

plastic timber) are what we make all our products

out of.

These, often brightly coloured, Recycled plastic

products are extremely durable and attractive.

They will maintain their appearance for many years

to come.

Our highly acclaimed Compost Tumbler, or

Compost Bin, Raised Beds, Garden Planters,

2 and 3 Seater Garden Benches, Sports

Benches, Play Dens, and other Outdoor

Classroom products are not flimsy and light,

but robust and solid enough not to blow away in

a gale.

If you would like to pay us a

visit you will be very welcome.

Our manufacturing unit is

in Burnley, Lancashire. We

deliver nationwide, but you

may be nearby and can pop

in to see us. Best to call

01282 861325 first though.

We’re close enough for a

visit if you are in Nelson,

Foulridge, Lane Bottom, Colne,

Bradford, Clitheroe, Accrington, Blackburn, Keighley,

Newchurch, Preston, Rochdale, Huddersfield,

Shipley, Dewsbury, Castleford, Harrogate, Wakefield,

Darwen, Leyland, Halifax, Bacup, Hebden Bridge,

Barnoldswick, and West Yorkshire. Manchester or

Bolton are a stone’s throw away. Come and see our

showroom and view these elegant recycled plastic

products close up.

Our plastic wood will amaze you. This recycled

plastic looks and feels like genuine wood but is

superior in design and quality to traditional wood

lumber or timber products.

See Eco-Table and Bench Outdoor

Furniture Set: https://www.youtube.com/

watch?v=aAdixaIBHYs

Please visit:

www.kedel.co.uk

Recycled Plastic Educational Furniture Maintenance-

Free Outdoor Classroom Products

Made from 100% British Recycled Plastic

Your own Industrial Design Team

Kedel specialise in developing exclusive and bespoke childrens

outdoor classroom furniture ranges in 100% British recycled

plastic. Whether it’s a one off design, or a full scale production

range, with the aid of the most up to date CAD Software

(Computer Aided Design) and state of the art CNC (Computer

Numerically Controlled) cutting and drilling machinery, our

industrial design team will help bring your ideas to life.

“Learning in the outdoor classroom ignites children’s

creativity. It encourages teamwork and social development

through collaborative activities, offering value across the

curriculum. We’ve seen the most significant improvements

in writing and maths — leading to our best SATs results yet.”

Ann Flannery, Head of Eatock Primary School

What we can offer

From our KitchenPhonics range to Deluxe Raised Beds,

Kedel offer a stunning range of maintenance-free outdoor

classroom products, that act as teaching aids to stimulate

brain development and learning.

The Value of Outdoor Experience

Teachers have told us that children learn much faster from

the stimulating experience of playing outdoors. Recent

research found that in the early years a child’s brain makes

24 million new connections every minute. In fact, 70% of

brain connections change every day from ‘new experience.’

Visit kedel.co.uk

Call 01282 861325

Kedel Ltd, Old Transco Depot, Oswald Street, Burnley, Lancs, BB12 0BY


XIII

Expert Safeguarding & Child Protection Services

Raising the standard: X2Consult leading

safeguarding excellence

2Consult has quickly

Xestablished itself as

a leading safeguarding

and child protection

consultancy, supporting

organisations to create

environments where

safety, security and

wellbeing are embedded

at every level. Operating

across the UK, Europe and

beyond, the firm works

with clients ranging from educational settings

and community organisations to corporate

environments and large-scale public events.

Founded in 2022 by safeguarding specialist

Thomas Stead, X2Consult draws on more than

a decade of frontline experience in safeguarding

leadership, education and PREVENT strategy.

This depth of expertise underpins the company’s

reputation as a trusted partner for organisations

seeking not just compliance, but confidence in

their safeguarding approach.

What sets X2Consult apart is its comprehensive,

end-to-end service. The company provides

everything from risk assessments and policy

development to accredited training, consultancy

support and on-the-ground safeguarding delivery.

Its flexible model – including day-rate consultancy

and long-term retainer partnerships – allows

clients to access expert support in a way that

aligns with their operational needs.

Central to its offering is the Safeguarding Essentials

programme, equipping organisations with the

practical tools and knowledge required to implement

effective safeguarding systems. Alongside this,

X2Consult delivers specialist training in child

protection, safer recruitment and online safety, as

well as scenario-based exercises designed to test

real-world responses.

The company is particularly recognised for its

expertise in safeguarding at mass participation

events, where attendee numbers often exceed 10,000.

In these complex environments, X2Consult provides

a fully integrated service – from intelligence

gathering and planning through to live event

oversight and post-event evaluation. Its safeguarding

officers operate both within crowds and remotely,

ensuring any concerns are managed swiftly,

professionally and in line with legal requirements.

Notably, X2Consult is the only UK provider offering

fully accredited, event-specific safeguarding

training, giving clients assurance that their teams

are equipped with industry-recognised knowledge

and up-to-date practices.

Beyond technical delivery, the consultancy’s

approach is rooted in building a culture of

safeguarding. By promoting awareness,

accountability and multi-agency collaboration,

X2Consult helps organisations move beyond

box-ticking exercises towards meaningful, lasting

protection for vulnerable individuals.

As demand for safeguarding expertise continues

to grow across sectors, X2Consult is increasingly

being recognised as the consultancy of choice. Its

tailored, proactive and deeply informed approach

ensures clients are not only compliant, but resilient

in the face of evolving risks.

With ongoing expansion both in the UK and

internationally, X2Consult is setting a new

benchmark for safeguarding consultancy –

delivering expertise, assurance and, ultimately,

safer environments for all.

For more on X2 Consult, please see below:

T 01622 278702

www.x2consult.co.uk

Service Sealing Solutions sponsors this issue of Industrial Solutions UK: see them on pages XVII-XVIII

XV

Commercial Transport

Reducing fleet downtime and

protecting vehicle value in 2026

Commercial vehicle repair strategies

for UK fleets

n today’s commercial transport environment,

Idowntime is more than just an inconvenience

– it’s a tangible cost. For fleet managers,

engineers, business owners, and insurers

across the UK, every hour a vehicle is off the

road impacts productivity, delivery efficiency,

and profitability.

As a leading specialist in commercial vehicle

repairs in the UK, Spectrum VR Group

recognises that reducing fleet downtime while

safeguarding long-term vehicle value is vital in

2026 and beyond.

The true cost of fleet downtime

When a commercial vehicle requires accident

repair or structural bodywork, the

consequences go far beyond the workshop:

■ Missed operational targets

■ Costs of replacement hire vehicles

■ Increased insurance premiums

■ Disruption to fleet planning

For HGV operators and commercial fleet

managers, efficient accident repair is

essential. A quick turnaround must be balanced

with high-quality workmanship to ensure

vehicles return to service safely and in

compliance.

Electrical Products

Why choosing the right commercial

bodyshop matters

Not all repairers are prepared to manage

modern HGV and commercial vehicle

repairs. Advanced materials, manufacturer

specifications, and safety standards require

specialist expertise. As experienced HGV repair

specialists, Spectrum VR Group offers:

■ Precise and thorough damage assessment

■ Manufacturer-approved truck and van

repair techniques

■ Structural repairs conducted in accordance

with BS 10125 standards

■ Investment in modern equipment and repair

technology.

Maintaining recognised accreditations and

manufacturer approvals ensures repairs are

done correctly the first time – decreasing the

risk of repeat damage and prolonged downtime.

Reviewing your fleet repair strategy?

If you are reviewing your fleet vehicle repair

strategy in 2026, consider how accredited

workmanship, manufacturer approvals, and

efficient repair planning can reduce downtime

and enhance long-term performance. Choosing

a trusted commercial vehicle repair partner

isn’t just about fixing damage – it’s about

safeguarding your fleet investment, ensuring

compliance, and keeping your vehicles safely on

the road.

For four decades, Spectrum VR Group has

helped UK fleets minimise disruption and

maximise performance through professional,

responsible commercial vehicle repair.

Get in Touch with Spectrum VR

If you require help with fleet

management strategy, repair,

repainting, or a professional

assessment, our team

is ready to assist.

Not nearby? No problem –

our team is here to help:

Essex 01708 868306

Kent 020 8300 9534

info@spectrumvr.co.uk

www.spectrumvr.co.uk

SIMONBOX: The IP66 waterproof

electrical floor outlet

Over the past 10 years the SIMON IP66 electrical floor box

has been specified and installed in thousands of commercial

and domestic projects throughout the UK.

The new 2026 SIMONBOX range is now available in both a

single and double socket configuration. Fitted with 13amp

UK sockets as standard, the outlet has additional space

for a data or a charging USB port. When closed the unit

is watertight allowing hard floor surfaces to be safely wet

washed. The SIMONBOX provides convenient and accessible

socket access in open floor locations helping to minimise

unsightly and dangerous trailing cables. Available in stainlesssteel

or black finish its frameless compact design blends

perfectly with any type of flooring. SIMONBOX end users

include John Lewis, NEXT Home and Heathrow & Gatwick

airports.

For more information, please visit: www.simonbox.co.uk

SIMONBOX is available through your Electrical Wholesaler.

What to speak to us? Call: 02038 051752.

XVI


Service Sealing Solutions Ltd –

suppliers of DOYMA products

Service Sealing Solutions Ltd are the sole UK distributor of DOYMA

products. Wherever services are installed through walls, ceilings or

floors, penetrating water may cause damage to buildings. Lack of

attention to the points of entry of pipes and cables into the building

can have serious results: damp cellars, equipment damaged by

water ingress and high repair costs. Service sealing systems ensure

professional and perfect pipe sealing, thus presenting excellent

preventative measures against structural damage. The very best in

German engineering is used to seal penetration points to the wall

to permanently prevent any infiltration of gases and water into the

building, and the duct sealing systems are guaranteed for 25 years.

Service Sealing Solutions supply the full range of products to suit all

situations for power cables, communication cables, pipes and ducts,

and specialising in sealing district heating pipes.

01952 510050 | www.servicesealingsolutions.co.uk

sales@servicesealingsolutions.co.uk


Strengthening infrastructure,

one seal at a time

ased in the heart

Bof Shropshire,

Service Sealing

Solutions Ltd is a

trusted leader in highquality

utility sealing

systems, supplying

innovative solutions

to both public and

private sector

projects across the

UK. Unlike traditional

distributors, the

company goes beyond

supply – providing

complete support

throughout every

stage of a project to

ensure contractors

achieve the best

outcomes in safety,

performance, and

compliance.

Founded by Company Director, Tina McAra,

the business was created in response to

a growing demand for advanced sealing

technologies that safeguard buildings

and infrastructure. Recognising

the opportunity to expand

nationally, Tina welcomed

her husband Jim into the

company to strengthen

its operational

capabilities and grow

its distribution network

across the country.

We caught up with Tina,

to see how the last 12

months have been for the

company:

“The last 12 months have been

extremely positive. Inquiries

are on a parr with last year, though our

conversion rate to order has improved. We

have slightly exceeded forecast with inquiries

and expected orders, likely to stay strong into

the early part of next year.”

Correct sealing plays a crucial role in ensuring

that utilities such as power, water, and

communications remain accessible throughout

a building’s lifespan. Not only does this simplify

maintenance with minimal disruption, but it

also protects structures from the costly and

harmful effects of water ingress. Wherever

ducts pass through walls, floors, or ceilings,

advanced sealing systems help prevent

moisture penetration, mitigating risks of

structural decay and maintaining

the integrity of assets for the

long term.

As the exclusive UK

distributor for two of

the sealing industry’s

most respected

manufacturers – DOYMA

and HKD – Service Sealing

Solutions Ltd delivers

premium products

engineered for

durability,

watertight

performance,

and compliance

with the highest industry

standards. Their extensive

portfolio of sealing solutions

supports a wide range of

utility applications, offering

reliability recognised by

contractors nationwide.

“The primary range of products

we sell has an industry leading 25-year

manufacturers backed guarantee. DOYMA

have had sealing products in service since the

1970’s which continue to perform, and we are

extremely proud to be technical partners and

distributors for DOYMA GmbH. We also have

some exciting product launches due for 2026!”

added Tina.

One of DOYMA’s most popular products

is the DOYMAfix ® which incorporates an

innovative design that guarantees simple,

fast, and safe installation of connection pipes

for heat pumps. This product is the first

professional above-ground entry for air-towater

heat pumps, and can be installed in a

short time. With this unique system, DOYMA

Husband and wife team, Jim & Tina have

recently visited DOYMA in Germany to find

out about the innovative products that

DOYMA have been developing

enables thermal to be maintained,

transmitted noise from the heat

pump is reduced and building

air tightness is assured aiding

the fabric of the building to

meet Part L of UK Building

Regulations.

With personalised support,

technical expertise, and a

commitment to exceptional

product quality, Service Sealing

Solutions Ltd continues to set the

benchmark for service duct sealing

across the UK.

For more information,

please see below:

T 01952 510050

sales@servicesealingsolutions.co.uk

www.servicesealingsolutions.co.uk

XVIII

Moore Concrete sponsors this issue of Industrial Solutions UK: see them on page XIV

Your Field Service Management

Software solution

For the team at Telecetera, IT, mobile workforce

management, and field service software are lifelong

passions. When we released our first IT solution 25

years ago, mobile phones were still a novelty; they

certainly didn’t fit in your pocket!

Our depth of experience sets us apart from the

competition, giving us an intuitive grasp of the ways that

mobile field service software can be used to improve

performance right field service management software

for your organisation.

Field Service Management Software

Implementing a field service management solution

isn’t just an upgrade – it’s a game changer, you’ll

quickly discover how seamlessly it integrates into

your operations, becoming a vital driver of efficiency,

visibility, and growth across your entire organisation.

Job Management & Tracking

Connect is technically robust, well proven, and it works

– as proven by all our existing customers in numerous

sectors.

Connect Job Maintenance App

Replace paper-based systems and

spreadsheets with a Smart Scheduler and

Mobile App for your mobile engineers.

Used by 100s of users in the UK &

South Africa for Reactive and Planned

Preventative Maintenance (PPM) Jobs.

Custom Software

Development Services

Your own Enterprise Application or Mobile

App to systemise and streamline your

business processes.

Replace cumbersome, uncontrolled

spreadsheets with a slick Web Application,

which gives your team/customers a

streamlined user experience.

Data Virtualisation &

Visualisation

Connect disparate enterprise data

sources, databases, and systems

together, and query the data as if it is in

one database.

Our team then build visualisation

solutions, which showcase your data on

digital maps in 2D, 3D, 4D, and 5D.

telecetera.co.uk | +44 (0)1905 612220

Recommended Supplier Directory

Festivals, Live Shows, Sports & Events

Play Centre Attractions

Olympus Crew set up in early 2018 has

developed into offering event solutions

with crew, technicians and carpenters

nationwide. Staffing jobs and events

predominantly in the north of the UK,

Olympus Crew has now spread across

the UK and the globe working on some

of the worlds most prestigious events.

T 07904 903452

www.olympuscrew.co.uk

We Advise, Design, Manufacture,

Install and Support

Free Advice & Wisdom:

40+yrs experience

All Types: ‘Indoor Soft

Playcentres’ -to- ‘Outdoor

Timber Adventure Courses’

Contact +44 (0)1792 422818

hello@playcraftgroup.wales

www.playcraftgroup.wales

Construction & Property Consultancy

Deep Hole Drilling

BAQUS is a UK-based construction

and property consultancy offering

expert cost management,

project management, surveying

and advisory services across

sectors like healthcare, education,

commercial and residential.

www.baqus.co.uk

Our industry-leading customers

around the world rely on UNISIG ®

deep hole drilling technologies for

powerful, productive solutions and

value. We engineer our machines

to handle a complete range of

applications, and support them

with our high level of expertise

and service.

www.unisig.com

Safety Consultancy

Manufacturing

DCON Safety Consultants is

committed to understanding

the specific needs, goals, and

desires of each individual

client and project.

T +353 (0)1 611 1556

info@dconsafety.com

www.dconsafety.com

W J Horrod Ltd has been manufacturing

equipment for the roofing industry

since the late 1950s. Recognised as the

leading manufacturer for Safety and

Efficiency, Horrods is a family owned

business based in London, as it has

been for its 75 year existence.

Contact 020 8539 8746

www.wjhorrod.co.uk

Portable Buildings

Eco-Friendly Plastic Products

ModCon Cabins provides modern,

affordable and bespoke modular

and portable buildings for a

multitude of situations, each one

carefully crafted from new and

used shipping containers.

T 0333 404 8822

www.modconcabins.co.uk

Kedel Limited is a family business,

founded on ethical and ecologically

sound principles.

We created our business to

showcase the very best recycled

plastic products, putting green,

sustainable living at the heart of

all our company decisions.

www.kedel.co.uk

XX


Compliance Solutions

Hoists

CheckedSafe was developed

to provide simple and

inexpensive compliance

solutions that could be

tailored to any industry.

T 01282 908429

info@checkedsafe.com

www.checkedsafe.com

National construction hoist

specialist, with over 40 years’

experience in the hire, sales and

servicing of construction hoists

and associated products, based in

the midlands and serving industry

throughout England.

T 01724 781647

www.directhoist.co.uk

Machinery

Sealing Solutions

With 35 years of experience in the

access industry, we will find the

platform most suited for your

needs and supply at the best price

achievable.

Independent Access Sales offer

a complete service management

facility throughout the UK.

T 07483 246878

iasales.co.uk

Service Sealing Solutions are the

sole UK distributor for the sealing

industry’s top manufacturers;

DOYMA and HKD.

Contact

T 01952 510050

servicesealingsolutions.co.uk

Solar Hybrid & Sustainability

Steel Buildings

SolGen Power offers UK-designed

hybrid solar generators combining

solar, battery and low-emission

backup to slash fuel costs, cut CO 2

and deliver reliable off-grid power

for construction, rail, events and

infrastructure projects.

T 01778 300394

www.solgenpower.co.uk

CASTLE STEEL BUILDINGS –

specialists in steel and portal

buildings. Trusted as one of the

UK’s leading suppliers.

T 01302 301402

info@castlesteelbuildings.co.uk

castlesteelbuildings.co.uk

Fixings

Commercial & Heavy Vehicle Repairs

Our Award Winning Solutions are one

of the most cost-effective solutions

to enable the fitting of external

furniture through external wall

insulation and rain screen cladding,

with the added benefit of being

designed specifically for the job.

T 01884 211540

info@swifix.co.uk

www.swifix.co.uk

From vans and pick-up trucks

to HGVs, buses, trailers, and

specialist vehicles, Spectrum VR

Group delivers expert accident

and bodyshop repairs across

London, Essex, and Kent.

Contact

Essex 01708 868306

Kent 020 8300 9534

www.spectrumvr.co.uk


XXI

UK Distributors of Heat Pumps

and Air Conditioning Systems

Gamma R290 Heat

Pumps 6-50kW

i-290 Heat Pump Range

R290 Gas

i-290 0106/0109/0112/0115/0118/0121/0123/0125/0127

Key Features

ä Inverter Monoblock.

ä Single solution for heating, cooling and hot water

production.

ä Unique design integrates advanced technical

solutions and modern aesthetics.

ä The i-290 range is available in 9 sizes, with power

between 6kW and the 27kW.

ä MAXA’s i-290 heat pumps are designed to

ä generate high water temperature even in the

harshest conditions.

ä Made in Italy.

ä Market leading SCOP’s.

ä 3 year Manufacturer’s warranty. For information

about extended warranties contact ESS.

Visit www.essaircon.com

Contact 0845 880 5862

Maintenance in Balance

CMServices Global Ltd: At

the heart of Industry 5.0

or many industries, whilst Industry 4.0 is still

Fdominating with advancements in automation,

smart systems, robotics, big data analytics, AI,

machine learning and of course, the Internet of

Things (IoT), the focus for others is already on

Industry 5.0. Defined by the European Union as

‘placing the wellbeing of the worker at the centre

of the production process and using new

technologies to provide prosperity beyond jobs and

growth while respecting the production limits of

the planet.’ In short, we are shifting from economic

values to societal ones and embracing sustainability.

Condition monitoring is an important aspect of both

Industry 4.0 and 5.0 through the real-time tracking

of machine functionality but with the added bonus

of predictive maintenance and remote diagnostics

across a whole system.

AI now brings automated processing with faultless

accuracy, through seamless analysis of huge

chunks of data in real-time and identifying patterns

proactively, before a problem arises, such as pump

cavitation. This importantly allows on-site engineers

to schedule checks and repairs before a more costly

machine failure or malfunction occurs, later down

the line, contributing to the five Rs of the circular

economy: reduce, reuse, repair, refurbish and recycle.

CMServices Global Ltd is a market-leading

consultancy, offering AI condition monitoring

to diverse sectors from marine and offshore,

automotive, manufacturing, food and beverage,

postal sorting through to chemical, oil and gas.

For decades, the annual scheduling of manual

maintenance has been standard practice but

with the advent of AI monitoring, irregularities

can be identified through early warning prevention:

smart analysis of sensor data and the comparison

to standard historical data.

The Maintenance in Balance (MiB) software service

from CMServices Global Ltd brings Machine Learning

and AI together to provide diagnostic support for

assets, through condition monitoring techniques

that identify irregularities and provide further

diagnostic guidance.

The MiB asset condition assessment software provides

a cutting-edge, integrated platform for foresighted

ship machinery maintenance and furthermore,

drastically reduces inspection and maintenance costs,

up to £500 thousand per ship annually. Predictive fault

monitoring can decrease ship downtime from 7 to 1.5

days. With existing shipping delays due to geopolitical

conditions in the Red Sea and Panama Canal, this is

welcome news for the shipping industry.

That’s not all: MiB helps shipping vessels meet

compliant seaworthy regulations, giving quality

assurance across the board. The real genius of MiB

is it supplies an extra layer of real-time prescriptive

maintenance outputs, based on accurate condition

and systems performance data and provides

next-level operational performance across safety,

regulatory, environmental and business areas.

With rising costs, the annual lifecycle costs of

operating one ship amounts to a staggering £60

million and a third of the annual budget is spent on

repair and maintenance, to keep ships buoyant and

operational. Research has found that as much as

60% of all maintenance is in fact wholly unnecessary

and can even cause more issues going forward.

It’s no wonder then that MiB is in demand and when

we spoke to Simon, he said CMServices Global Ltd was

committed to ‘eight separate current pilot projects’

across cruise liners, container ships and oil and gas

industries, alongside a tender process in power

generation for three in Europe and two in the UK.

For more information on MiB and other

services, across any sector, please see

the website below:

T +44 (0)7422 079140

https://cmservicesglobal.com

MAINTENANCE IN BALANCE, THE ONLY SOFTWARE YOU’LL EVER NEED!

MiB is a product/service that builds in diagnostic support for multiple assets via Machine Learning and Artificial Intelligence.

MiB incorporates the diagnostic knowledge of expert diagnosticians in the conventions of mature condition monitoring techniques and

aligns this with AI functionality to identify true outliers and then offer meaningful diagnostic advice.

As more assets are managed remotely and fewer onboard personnel are sufficiently experienced to deal with all scenarios, it is becoming

clear that a marriage of technology and experience is needed to balance the equation.

Objectives

Using our asset condition assessment software MIB, we will create an integrated software platform for undertaking prescriptive

maintenance on your ship’s machinery, structures, and auxiliary systems. This will be achieved by using data from existing condition

monitoring, diagnostic sensors and systems, the implementation of advanced predictive analytics and the integration of a maintenance

actions/prescription database.

Based upon advanced, artificial intelligence (AI) and deep learning algorithms MIB will prescribe, the most appropriate maintenance strategy in

real-time for every asset under its control, based on the subtle but pre-alarm indications of emerging faults that will occur at a future time.

Specific objectives of MIB are to:

ä Establish the monitoring and maintenance needs of each vessel

ä Specify the software platform parameters based on each vessel’s requirements

ä Deploy our intelligent monitoring software module

ä Integrate the module into the MIB platform and provide routine updates to the crew

View the MIB interview on YouTube

Please visit: maintenance-in-balance.com or contact UK: +44 (0)7422 079140 or Baltic: +370 (8)652 99978

14


Over 45 years

experience in the

manufacturing industry

THE COMPLETE

MANUFACTURING PACKAGE

We specialise in custom manufacturing and pride

ourselves on being able to offer ‘The Complete

Package’ including CNC Turning, CNC Milling, CNC

Grinding, Centreless Grinding and Universal Grinding

– alongside various other services. We are also

honoured to receive the Aerospace EN9100 (AS9100

technical equivalent) accreditation.

Our Services

CNC Turning CNC Milling Centreless Grinding

CNC Grinding Surface Grinding Quality

Supply Chain

CAD/CAM

Please visit www.multigrind.co.uk

Telephone +44 (0)1923 721011 or email sales@multigrind.co.uk

Deep Hole Drilling

UNISIG launches assemble-to-order

program for UNE gundrilling machines

NISIG, a global leader in deep hole drilling

Umachines and technology, has launched

a new assemble-to-order program for its

versatile UNE series gundrilling machines.

Designed to combine the speed of fast

delivery with the flexibility of custom

configuration, the program redefines

how job shops and manufacturers

acquire critical gundrilling capabilities.

“Gundrilling machines are not as common as

CNC mills or lathes, but that doesn’t mean

customers should settle for longer lead

times, compromises in performance, or poor

service,” said Anthony Fettig, CEO of UNISIG.

“With this new program, we’re making it

easier than ever to say yes to gundrilling.”

UNISIG’s assemble-to-order initiative

maintains inventory of all major components

of the UNE series, allowing machines to

be assembled to each customer’s exact

specifications – without the waste or

delays associated with pre-built stock or

full custom builds. With shorter lead times,

often half that of traditional build-to-order

systems, customers can get precisely what

they need faster.

“At UNISIG, we’re always focused on what’s

next, and our assemble-to-order program is

a prime example,” added Fettig. “Implementing

this approach has modernized key areas

of our operations by improving machine

quality, shortening lead times, and giving us

better visibility into service part needs and

inventory management.”

This effort required deep co-ordination

across engineering, supply chain,

manufacturing, and customer service.

Modular machine designs, synchronized ERP

systems, and automated planning tools allow

UNISIG to deliver tailored machines while

maintaining tight control over quality, cost,

and inventory.

About UNISIG

UNISIG is a leading manufacturer of deep hole

drilling machines and automation systems,

serving industries ranging from aerospace to

medical to moldmaking. Known for engineering

innovation and in-house manufacturing capabilities,

UNISIG combines precision, performance, and

reliability in everything it delivers.

Please visit: www.unisig.com

UNISIG: Manufacturer of deep hole

drilling machines

NISIG is a global leader in the design and

Umanufacture of deep hole drilling machines,

tooling, and integrated automation systems

serving industries that demand extreme

precision and reliability. From aerospace and

defence to medical manufacturing, hydraulics,

energy, and mold making, UNISIG delivers

engineered solutions that help manufacturers

produce complex components with exceptional

accuracy and consistency. The company’s

advanced technologies support a wide range of

applications, from micron-scale medical drilling

to large-diameter bores extending several

meters deep.

Built on a foundation of engineering innovation

and in-house manufacturing expertise, every

UNISIG system is developed to maximize

productivity, precision, and long-term

performance. The company designs complete

deep hole drilling solutions that combine

sophisticated machine platforms, automation,

tooling, and process knowledge into highly

efficient manufacturing systems. Its capabilities

include gundrilling, BTA drilling, skiving and roller

burnishing, trepanning, and advanced CNC

machining technologies engineered to meet the

demands of modern production environments.

UNISIG’s reputation has been built through

decades of solving complex manufacturing

challenges for customers around the world. Its

machines are engineered and manufactured

in the United

States and

supported globally

through technical

service, training,

and application

expertise. Whether

supporting highvolume

production

or highly

specialized custom

applications,

UNISIG partners

closely with

manufacturers

to improve

throughput,

maintain tight

tolerances,

and integrate automation into streamlined

workflows.

Today, UNISIG continues to advance deep hole

drilling technology with solutions that enable

manufacturers to achieve greater efficiency,

reliability, and precision in some of the world’s

most demanding industrial applications.

The accompanying video highlights UNISIG’s

advanced deep hole drilling technologies in action,

showcasing the precision, scale, and engineering

sophistication behind its manufacturing systems.

From high-performance aerospace components

to demanding industrial applications, the video

demonstrates how UNISIG combines machine

rigidity, automation, CNC control, and process

expertise to achieve exceptional accuracy and

repeatability in deep hole drilling operations.

It also emphasizes the company’s focus on

innovation, customer collaboration, and complete

manufacturing solutions that improve productivity

while maintaining the highest quality standards.

You can see more below:

https://vimeo.com/1177428604?fl=pl&fe=v

Please visit:

https://unisig.com


is the leading producer of gundrilling

and BTA deep hole drilling machines

Our industry-leading customers around the world rely on UNISIG ® deep hole drilling technologies

for powerful, intuitive capabilities. We engineer our machines to handle a complete range of

applications, and support them with our high level of expertise and service.

Standard Gundrilling Machines: Job Shops & Production Drilling

Production Deep Hole Drilling and Automation:

Modular Machines for Production Drilling

For more information, please visit our website:

www.unisig.com

Machines • Tools • Automation

UNISIG machines, engineered and manufactured in the USA

Recommended Supplier Directory

Precision Grinding

Warehouse & Materials Handling

Multigrind Services Ltd specialise

in custom manufacturing and pride

ourselves on being able to offer

‘The Complete Package’ including

CNC Turning, CNC Milling, CNC

Grinding, Centreless Grinding and

Universal Grinding.

T 01923 721011

sales@multigrind.co.uk

www.multigrind.co.uk

Autrix exists to help ambitious

warehouse businesses move

beyond manual workarounds

and disconnected systems.

We combine deep operational

experience with smart technology

to streamline how warehouses

run from goods-in to dispatch.

T 01522 246990

www.autrix.co.uk

Consultancy

UK Machinery

Your Virtual Finance Office provides

management reporting, cash-flow

control and CFO-level support

designed for manufacturers with

long lead times and tight margins.

Flexible monthly plans scale with your

business, helping you protect cash,

improve margins and plan for growth.

0121 805 6820

www.dvfo.co.uk

Machine Operators – Software

Engineers – Electronic and

Hydraulic Engineers

We have an excellent skill force and

team to back up our sales with 24/7

Support Network.

Over 35 Years if experience.

T 01482 420491

www.machinesupplies.co.uk

Marine, Offshore, Chemical, Oil & Gas

Noise & Vibration Measurement

MiB is a product/service that

builds in diagnostic support

for multiple assets via Machine

Learning and Artificial Intelligence.

T +44 (0)7422 079140

simon.edmondson@

cmservicesglobal.co.uk

maintenance-in-balance.com

We manufacture and supply highquality

acoustic measurement

instrumentation. Cirrus Research

is dedicated to the prevention

and eradication of noise-induced

hearing loss and environmental

noise pollution.

T +44 (0)1723 891655

www.cirrusresearch.com

Business Crisis Management

Production Freeze Dryers

At SDH, we help businesses

of all sizes build resilience by

identifying risks, safeguarding

critical activities, and ensuring

continuity through tailored

business continuity plans and

crisis management strategies.

07717 226379

sdhcrisismanagement.co.uk

Biopharma Group encompasses

several divisions catering to specific

territories and needs. Our aim is to

meet the needs of our customers’

projects appropriate to the size and

stage by augmenting their in-house

expertise whether to buy equipment,

a single cycle run/analysis or a full

formulation development programme.

www.biopharma.co.uk

22


Motor Technology

Air Pollution Control Systems

Your B2B partner for

customized electric motors –

trusted since 1927

As a German manufacturer, we

offer individual motor solutions

worldwide. Our quick adaptations and

customised designs up to 25MW and

13.8kV ensure the smooth operation

of your industrial machinery.

T +44 (0)1664 500844

http://menzel-motors.com

Providing specialist industrial air

pollution control, gas treatment

and odour control packages –

turnkey supply of the complete

system: design, supply, installation

and commissioning – all backed by a

process guarantee.

T 01403 290000

www.ergapc.co.uk

Deep Hole Drilling

Electrical Products

Our industry-leading customers

around the world rely on UNISIG ® deep

hole drilling technologies for powerful,

productive solutions and value. We

engineer our machines to handle a

complete range of applications, and

support them with our high level of

expertise and service.

T +49 (0)7125 9687590

https://unisig.com

The SIMONBOX IP66 watertight

floor box is designed for use in

hard floor areas which require

occasional power and data

connection and an IP protection

rating. Typical ip66 waterproof

floor box installations include

Department Stores, Airports,

Train Stations and Car showrooms.

T 0203 286 7949

simonbox.co.uk

Sealing Solutions

Measurement Applications

Service Sealing Solutions are the

sole UK distributor for the sealing

industry’s top manufacturers;

DOYMA and HKD.

Contact

T 01952 510050

servicesealingsolutions.co.uk

Interface Force Measurements

Ltd is the master distributor for

Interface load cells in the UK, Ireland,

Middle East and North Africa. While

we are separate companies, our

interests and values are closely

aligned in a long-term commercial

relationship spanning over 30 years.

T +44 (0)1344 776666

interfaceforce.co.uk

Emission Monitoring & Gas Control

Machine Knives

ECO PHYSICS AG offers innovative

analytical solutions for measurement

tasks in the fields of environment,

health and process control.

T +41 55 220 22 22

info@ecophysics.com

www.ecophysics.com

With over 25 years of experience

supplying the machine knives

industry. CAMB Machine Knives

was established in the UK in 1989

and aimed to provide consistently

high quality knives and service to a

broad range of industry sectors.

T 01454 322178

sales@camb-knives.co.uk

www.camb-knives.co.uk


CAMB MACHINE KNIVES

“A A Cut Above the Rest”

QUALITY IS OUR GUIDING PRINCIPAL

With over 34 years of experience supplying the machine knives industry. CAMB Machine Knives was established

in the UK in 1989 and aimed to provide consistently high quality knives and service to a broad range of industry

sectors. Based on these guiding principals, CAMB Machine Knives has flourished and grown throughout Europe,

USA in 25 countries worldwide establishing a reputation for high quality products and service.

SCALLOPED MICROTEETH KNIVES

Scalloped microteeth knives, also referred to as micro-serrations. They are used in the poultry industry. Our

design of micro-teeth allows for the knives to be re-sharpened while offering the same wear rate as OE knives.

We are also able to offer our microteeth on other knives including straight knives.

PART NO: 10/22349

PART NO: 10/22362 PART NO: 10/22361

PART NO: 10/22351 PART NO: 10/22352

KNIVES FOR INDUSTRY – WE’LL SUPPLY IT

Our range includes many types of blades, but not limited to:

CIRCULAR KNIVES

GRANULATOR KNIVES

POULTRY KNIVES

RAZOR BLADE KNIVES

STRAIGHT KNIVES

TOOTHED KNIVES TRAY FORM KNIVES TOP/BOTTOM KNIVES ZIG ZAG KNIVES

CAMB MACHINE KNIVES INTERNATIONAL LTD

Tel: 01454 322178 | Fax: 01454 321172

Email: sales@camb-knives.co.uk

www.camb-knives.co.uk

MANUFACTURERS AND DISTRIBUTORS OF MACHINE KNIVES TO ALL INDUSTRIES

Industrial Solutions Issue 698

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?