WORKHOLDING AuTOMATION 5-FACE-MACHINING - Thame ...

thame.eng.com

WORKHOLDING AuTOMATION 5-FACE-MACHINING - Thame ...

Distributor:

Version_Thame_1000

THAME WORKHOLDING

Field End, Thame Road,

Long Crendon,

Aylesbury,

Bucks

HP18 9EJ

Tel: 01844 208050

Fax: 01844 201699

Email: sales@thameworkholding.com

www.thameworkholding.com

WORKHOLDING • AUTOMATION • 5-FACE-MACHINING • 2011

Distributor:

WORKHOLDING

2011

AuTOMATION

5-FACE-MACHINING


1

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Welcome to the world of LANG Technik:

Motorsports

© www.kadach.com

Aerospace

Engineering

Of course we are serving many more industries, such as automobile industry, precision engineering,

jewellery and food industry. Aside of that many schools, research institutes and universities make

use of our innovative products.

2

Medical Engineering

Defence

Power Generation


NEW !

Once again there are many new developments

in the catalogue. Find out more about some of the

highlights right below!

Vario•Tec 77 centre vice

Our proven Vario•Tec adaptable support system is

now available for Makro•Grip ® 77 centre vices! The

perfect vice for small and compact parts.

Page 44

Eco•Compact automation system

Our small-sized and flexible assistant for all machining

centres. The simple and affordable automation system for

small batches.

Page 106

3

new product developments

Profile jaws – The clamping system

for all profile parts!

Clamp your profile parts safely with accurate reproduction.

Add-on jaws can be replaced easily, fast and with high repeatability.

Available for all Makro•Grip ® vices 77 and 125.

Page 32

Quick•Point ® – Tri•Top tombstone

The compact and versatile tombstone. Up to 3 centre vices

46 or 77 can be clamped at the same time with a minimal

interference diameter. Equipped with the Quick•Point ® 52

zero-point system and applicable for our automation system.

Page 76

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Trade show appearances world wide:

MACH

Birmingham

Industrie

Paris

TechniShow

Utrecht

AMB

Stuttgart

4

Euromold

Frankfurt

JIMTOF

Tokyo

Metall

München Munich

Of course we are also represented by our business partners on all important trades shows, e.g. Basel,

Bilbao, Bangalore, Brno, Bruxelles, Chicago, Copenhagen, Milan, Madrid, Stockholm,...


Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec

Up to 20 tons of hydraulic pressure generates indentations

in the surface of work pieces and guarantees highest holding

power in Makro•Grip ® vice due to form-closure technology.

Page 6

Ideal for 5-face machining (best accessibility). Increased

clamping range by reversible jaws. Available in many types,

e.g. Twin•Grip, Makro•Grip ® for profile clamping or Vario•Tec

centre vice.

Page 20

The zero-point clamping system with the lowest height

world wide and an exceptional positional accuracy make

this system the best in the market.

Page 50

Efficiency for horizonal machining centres: The adaptation

of compatible Quick•Point ® pallets in connection with a

sturdy tombstone generates a flexible and cost-effective

positioning system.

Page 80

Eco•Tower and Eco•Compact – our patented storage and

handling systems provide efficient manufacturing even with

small batches.

Page 96

Reduce set-up times! Adaptable support system with

movable pins for common vices. Proven and tested over

100.000 times.

Page 124

Cleaning problems? Now you can solve it with Clean•Tec!

Expandable carbon fibre wings clean the machine table or

suface of the work pieces quickly and reliable.

Page 136

5

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Präge•Fix

6


7

Stamping unit

Page 14

Accessories

Page 17

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Präge•Fix

Grip•Fix: Our patented "form-closure

technology" guarantees maximum

holding power – world wide!

8


9

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


"The original" – Advantages of Grip•Fix

stamping technology

Minimum clamping depth of work pieces (only 3 mm)

� enormous material savings

Highest holding power at minimum clamping force by form-closure technology

� minimum material deformation

High-tech holding tooth design

� high repeat accuracy (smaller than 0.01 mm)

In connection with Makro•Grip ® vices – best accessibility to work piece

� Short tools, that cause only light vibrations, can be used which results in

better surfaces and a minimum of abrasion

Preparatory time of work piece is reduced to a minimum because stamping/

indentation is conducted directly on saw cut or scale surface

� high reduction of set-up time

10


Ideal stamping pressure for realizing

a form-closure effect:

Stamping jaws

Even long extended parts are held with a clamping depth of only 3 mm.

Optimum milling performance even when machining

big and heavy parts.

11

Ideal stamping contour on work piece –

Control mark max. indetation 1/10 mm

Grip•Fix

Highest holding power is realised due to the formclosure

effect.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Functional principle of Grip•Fix technology – 5 seconds, which

All materials such as steel, aluminum, copper, brass or plastics or harder materials can be stamped – stamping time 3 - 5 seco

1

Stamping achieved

in 3 - 5 seconds

2

12

Sawing with minimum addition of

material to clamping depth


changes your machining process

nds

3

Inserting work piece in Makro•Grip ®

vice for safe “form-closure clamping“

at minimum clamping depth

4

13

Depth stops/ control marks should

be seen – max depth 0.1 mm

Grip•Fix

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Standard stamping unit: Ideal for a cost-effective

start in stamping technology

ergonomic adjustment of

stamping pressure

quick jaw adjustment

for different sizes of

work piece

pneumatic operation by hand

or foot for activating stamping

procedure

Stamping unit for work benches, max. clamping range 245 mm or 355 mm

Included in delivery:

• Stamping vice

• Stamping jaws with parallels (3 mm)

• Pneumatic-hydraulic power multiplier (0-360 bar)

• Pneumatic commutator for operation by hand or foot

• Gauging blocks to measure height of stamping teeth

• Scaled work piece stopper

• Protection shield

14

easily readable

hydraulic pressure

pneumatic hydraulic

power multiplier with

visible oil-level display

stamping jaws for

materials up to 35 HRc

(or 45 HRc), designed for

up to 20 tons of stamping

force

scaled stopper for quick

and safe insertion of

work piece

Description/Type: Weight in kg Order No. Price

Stamping unit, standard, clamping range max. 245 mm,

with standard stamping jaws for materials up to 35 HRc

Stamping unit, extended version, clamping range max. 355 mm,

with standard stamping jaws for materials up to 35 HRc

Stamping unit, standard, clamping range max. 245 mm,

with High-End stamping jaws for materials up to 45 HRc

Stamping unit, extended version, clamping range max. 355

mm, with High-End stamping jaws for materials up to 45 HRc

67,0 41200

77,0 41350

67,0 41200-HE

77,0 41350-HE

Stamping unit


THE ORIGINAL! Highest holding power world

wide due to "form-closure technology"!

Clamping of work piece

without stamping technology

Clamping problems of other manufacturers:

• A safe clamping of high-tensile materials can

only be realised with high clamping pressure

• Large and poorly accessible applications are

needed

• High wearing of jaw teeth and vice guidances ways

• Clamping with high repeatability is not possible

15

Grip•Fix

Clamping of work piece

with form-closure stamping

technology

Advantages of the Grip•Fix technology by LANG:

• Pre-stamping of the work piece with up to 20

tons of pressure allows you to clamp high-tensile

materials even with a smaller and compact vice

• An excellent accessibility allows you to use short

tools which results in fewer vibrations and longer

life

• Minimum wear of the vice

When machining Titanium, high clamping forces

are needed. We tested multible clamping systems

in our plant and acknowledged that Lang's Grip•Fix

technology has the highest holding power of all. To

bring in indentations in the work pieces we need

up to 15 tons of power, because we also machine

high-strength materials. That is only possible with

LANG's stamping technology.The Grip•Fix system

guarantees consistent and accurately defined holding

forces and therefore secure workholding in our

automated production line.

Helmar Schumacher

CAD/CAM

Fa. Herrmann Ultraschalltechnik

GmbH & Co. KG

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Mobile stamping unit – the handy and flexible

solution for your shop

base plate with slots for adding

a second stamping vice.

Marking bores for a simple

adjustment when stamping

with two vices

comfortable stamping by

foot operation. Both hands

can be used for handling

the work piece in an ergonomical

manner

Mobile stamping unit on trolley, max. clamping range 355 mm

Included in delivery:

• Stamping vice

• Stamping jaws with parallels (3 mm)

• Base plate with slots ( 596x496 mm)

• Handy and rugged trolley

• Pneumatic-hydraulic power multiplier (0-360 bar)

Description/Type Weight in kg Order No. Price

Mobile stamping unit, max. clamping range 355 mm,

with standard stamping jaws for materials up to 35 HRc

Addition stamping vice for dual stamping, with standard

stamping jaws

Mobile stamping unit, max. clamping range 355 mm,

with High-End stamping jaws for materials up to 45 HRc

Additional stamping vice for dual stamping,

with High-End stamping jaws

16

Mobile stamping unit

200 41400

45 41140

200 41400-HE

45 41140-HE

extended clamping

range (up to 355 mm)

handy and rugged

trolley for a flexible

place of operation

for long work pieces we

recommend dual-stamping

• Pneumatic commutator for operation by hand or foot

• Gauging blocks to measure height of stamping teeth

• Scaled work piece stopper

• Protection shield


Creating trust:

Always the same clamping quality!

To ensure consistent holding power in your clamping device, please check

the wear of the gripping teeth on a regular basis.

Clamp slightly one gauging block with slots on each side of

the stamping jaws.

17

Gauging blocks to measure height of the gripping teeth

Reconditioning of stamping jaws

Description Order No. Price per pair

Reconditioning standard

stamping jaws

Reconditioning High-

End stamping jaws

Grip•Fix > Accessories

Order No. Price per set

41020

An easy and quick way to control the gripping teeth contour

and decide if reconditioning is necessary.

When 3rd gauging block fits between the stamping jaws, send

jaws to us for reconditioning.

41111-01

41112-01

You can recondition the gripping teeth up to 10 times. To

bridge the time of the reconditioning we suggest keeping a

second pair in reserve.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


The original by LANG!

Different hard materials require different stamping jaws to extend the durability and to guarantee a safe

clamping. With our standard stamping jaws you are able to stamp work pieces up to 35 HRc, while high-tensile

materials (up to 45 HRc) require High-End stamping jaws.

Tensile strength Rm N/mm²

Standard

stamping jaws

Hardness HRc

Standard stamping jaws with parallels 3 mm

Weight in kg Order No. Price per pair

High-End stamping jaws with parallels 3 mm

Weight in kg Order No. Price per pair

18

1,4 41111

Standard stamping jaws for all materials up to 35 HRc.

(Identifiable by material No. 20 on the back side of the jaws)

1,4 41112

High-End

stamping jaws

High-End stamping jaws for all materials up to 45 HRc.

(Identifiable by material No. 15 on the back side of the jaws)


19

Grip•Fix > Accessories

Centre marking tool enables easy insertion

in central position without stopper

Centre marking tool

Description/Type Order No. Price

Centre marking tool 41010

Spare marking stud 41010-01

Easy retrofitting of your stamping unit.

Due to the centre marking the work piece blanks can be inserted centrally in our scaled centre vices.

(Stoppers are not necessarily needed anymore). You are still able to insert several work pieces with high

repeatability without stoppers.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ®

20


21

Makro•Grip ®

centre vices

46, 77, 125

Page 26

Makro•Grip ®

profile clamping vices

77 + 125

Page 34

Twin•Grip

conversion kits

Page 40

Twin•Grip

profile clamping

vices 77 + 125

Page 42

Vario•Tec

vices

77 + 125

Page 44

Accessories

Page 48

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


claMpinG with Grip:

One vice – Many claMpinG OptiOns!

5-Face MachininG at the hiGhest level!

Makro•Grip ® Profile Clamping

22


Twin•Grip Vario•Tec

23

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


The patented centre vice – Makro•Grip ® –

more precise, strong and with larger clamping range due

additional clamping location

for non-stamped work pieces

and semi-finished parts

double guidance for

jaws with integrated

slot nuts

stable and sturdy base -

lightweight and handy

obtain a larger clamping

range by turning around the

jaws within one minute.

equipped with double-sided holding

teeth contour. Resting height 3 mm

centring accuracy

± 0.02 mm

24

equipped with clamping

studs for precise clamping

in Quick•Point ®

zero-point system

spindle covers available,

see page 48.

thread to attach

stoppers


to reversible jaws.

Large clamping range due to patented reversible jaws. 5-face machining at the highest level.

Best accessability for 5 - face machining

Highest holding power at lowest clamping force due to

patented Stamping technology

High repeat accuracy for inserting work pieces in holding

contour of jaw - no stoppers needed

Large clamping range due to reversible jaws

Easy and flexible handling due to lightweight vices and

integrated zero-point clamping

Makro•Grip ® 125

Makro•Grip ® 77

Makro•Grip ® 46

Clamping force in N

20000

18000

16000

14000

12000

10000

8000

6000

4000

2000

10 20 30 40 50 60 70 80 90 100

25

Makro•Grip ®

We recommend using

a torque wrench when

working with our clamping

vices.

Torque in Nm

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ® 46 – our "baby"

High holding power with a marginal interference area

NEW!

Makro•Grip ® 46

Description/Type

Makro•Grip ® 46

base length 77 mm

Makro•Grip ® 46

base length 117 mm

Makro•Grip ® 46

base length 157 mm

Clamping range

in mm

26

Weight in kg Order No. Price

0 – 65 1,7 47065

0 – 105 2,5 47105

0 – 145 3,3 47145


"The Makro•Grip ® 46 centre vise enables the manufacturing

of extremely flexible clamping applications."

Markus Ausperger (General Manager)

Fa. Ausperger Präzisionstechnik

27

Perfectly qualified for plastic machining.

Makro•Grip ® 46

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ® 77 – the „all-rounder“

Our famous and top-selling vice – qualified for various tasks

NEW !

Makro•Grip ® 77

Description/Type

Makro•Grip ® 77

base length 102 mm

Makro•Grip ® 77

base length 130 mm

Makro•Grip ® 77

base length 170 mm

Makro•Grip ® 77

base length 210 mm

Clamping range

in mm

28

Weight in kg Order No. Price

0 – 85 2,7 47085

0 – 120 3,1 47120

0 – 160 3,7 47160

0 – 200 4,4 47200


Highest holding power even with a compact design Makro•Grip ® on a rotatory round table

29

Makro•Grip ® 77

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ® 125 – the "jumbo"

Our strong centre vice for major cutting tasks

Makro•Grip ® 125

Description/Type

Makro•Grip ® 125

base length 160 mm

Makro•Grip ® 125

base length 210 mm

Makro•Grip ® 125

base length 260 mm

Makro•Grip ® 125

base length 310 mm

Makro•Grip ® 125

base length 360 mm

Clamping range

in mm

Weight in kg Order No. Price

0 – 155 9,0 47155

0 – 205 10,9 47205

0 – 255 12,8 47255

0 – 305 15,2 47305

0 – 355 17,6 47355

30


The best holding power even at a clamping height of only 3 mm. 5-face machining with Makro•Grip ® 125

31

Makro•Grip ® 125

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Your clamping system

for all profile parts!

soft add-on jaws. Mounted to the base

jaws via 4 screws (M8x20 / M10x25)

double guide

rail for jaws

stable, sturdy and lightweight base

unit

highly precise

centring accuracy

32

NEW !

equipped with clamping studs for precise

clamping in Quick•Point ® zero-point system

manufacture your own add-on jaws!

hardened

base jaws


The complete machineability

of the soft add-on jaws allows

customers to have multiple

profiles in one single jaw.

Clamping of completely different

shaped workpieces possible.

33

Profile clamping

Available and suitable for all Makro•Grip ® vises 77 and 125.

Purchase the center vise and base jaws once. Manufacture

your own soft add-on jaws. Drawings upon request.

Accurate positioning of soft add-on jaws via location tenons.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Base jaws retrofitting kit for all Makro•Grip ® 77

You are also able to mount

your machined add-on jaws top

down thanks to the thread in

the base jaws.

Base jaws for Makro•Grip ® 77

Description/Type

Base jaws for Makro•Grip ® 77,

1 pair incl. location tenons and

screws, 112x46 mm

34

Profile clamping vice 77

Makro•Grip ® 77 profile clamping vice with base jaws 112x46 mm

Description/Type

Distance x

in mm

Weight

in kg

Makro•Grip ® 77 profile clamping vice with base jaws

Weight

in kg

Order

No.

1,5 49771

Order

No.

Base length 102 mm 10 3,3 49010

Base length 130 mm 40 3,7 49040

Base length 170 mm 80 4,3 49080

Base length 210 mm 120 5,0 49120

Price

in €

Price

in €


Base jaws retrofitting kit for all Makro•Grip ® 125

Base jaws for Makro•Grip ® 125

Description/Type

Base jaws for Makro•Grip ® 125,

1 pair incl. location tenons and

screws, 160x57 mm

35

Weight

in kg

Order No.

4,1 49251

Price

in €

Makro•Grip ® 125 profile clamping vice with base jaws 160x57 mm

Description/Type

Distance x

in mm

Profile clamping vice 125

Makro•Grip ® 125 profile clamping vice with base jaws

You are also able to mount

your machined add-on jaws top

down thanks to the thread in

the base jaws.

Weight

in kg

Order

No.

Base length 160 mm 50 10,4 49050

Base length 210 mm 100 12,3 49100

Base length 260 mm 150 14,2 49150

Base length 310 mm 200 16,6 49200

Base length 360 mm 250 19,0 49250

Price

in €

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Add-on profile jaws made of steel or aluminum

Soft add-on jaws for Makro•Grip ® 77

Description/Type

Add-on jaws steel,

112x57x36 mm, material:

16MnCr5, 1 pair

Add-on jaws aluminum,

112x57x36 mm, material:

AlZnMgCu 1,5, 1 pair

36

Weight

in kg

Order No.

3,5 49776

1,2 49777

Soft add-on jaws for Makro•Grip ® 125

Description/Type

Add-on jaws steel,

160x57x47 mm, material:

16MnCr5, 1 pair

Add-on jaws aluminum,

160x57x47 mm, material:

AlZnMgCu 1,5, 1 pair

Weight

in kg

Order No.

8,9 49256

3,2 49257

Alternatively, you can manufacture

your own soft add-on jaws!

(Drawings on request)

Price

in €

Price

in €


Profile jaws with integrated guidance

These profile jaws are mounted integrally on the vice.

Hardened guideways, soft profile block.

Sufficient steel body for optimal profile milling.

37

Profile jaws Makro•Grip ® 46

Order No. Amount Price

47469 1 pair

Dimensions (LxWxH) 46x21x20 mm

Weight: 0,5 kg

Material: 16MnCr5 (soft)

Profile jaws Makro•Grip ® 77

Order No. Amount Price

47779 1 pair

Dimensions (LxWxH) 125x47x40 mm

Weight: 5,0 kg

Material: 16MnCr5 (soft)

Profile jaws Makro•Grip ® 125

Order No. Amount Price

47259 1 pair

Dimensions (LxBxH): 125x47x40 mm

Weight: 5,0 kg

Material: 16MnCr5 (soft)

Profile clamping

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Middle jaw with spindle to convert Makro•Grip ® :

For batch production of small to mid-size

workpieces

Specifications:

Dual-clamping with Twin•Grip

38

NEW!

Grip•Fix holding teeth contour provides highest clamping force on work piece

Jaws can be reversed in approx. 1 min for larger clamping range

Additional clamping surface for non-stamped work pieces and semi-finished parts

Rigid base made of case-hardened quality steel

Floating assembly of movable jaws allows safe clamping of work pieces with different

lengths up to 2 mm difference (saw cut allowance)

4-piece-machining in Twin•Grip vice by dual-clamping


Transform your Makro•Grip ® into a

Twin•Grip within a few moments!

To remove the Makro•Grip ® jaws from the base unit, unscrew the jaws using an Allen

wrench.

Remove spindle and centerpiece with a

mallet and drift punch.

3 Twin•Grip 125 vices in a row to manufacture long parts.

Fa. Thomas Kalmbach Aluminium Formenbau

Replace the spindle + centerpiece with

the middle jaw + spindle and tighten the

screw on the bottom of the base.

39

Multiple copper parts are clamped in a row.

Fa. MF Schirmbrand KG, Wyhl

Twin•Grip

Flip base unit and remove center screw

with an Allen wrench.

Assemble the Makro•Grip ® jaws back

onto the base. You are able to use your

Makro•Grip ® vise as a Twin•Grip now.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Twin•Grip retrofitting kit – Convert your Makro•Grip ® vice

into a dual-clamping Twin•Grip!

NEW !

Spindle and middle jaw for Twin•Grip 46

Description/Type

Spindle length

82 mm, Ø12 mm

Spindle length

122 mm, Ø12 mm

Spindle length

162 mm, Ø12 mm

Spindle and middle jaw for Twin•Grip 77

Description/Type

Spindle length

102,5 mm, Ø16 mm

Spindle length

135 mm, Ø16 mm

Spindle length

175 mm, Ø16 mm

Spindle length

215 mm, Ø16 mm

Spindle and middle jaw for Twin•Grip 125

Description/Type

Spindle length

165 mm, Ø20 mm

Spindle length

215 mm, Ø20 mm

Spindle length

265 mm, Ø20 mm

Spindle length

315 mm, Ø20 mm

Spindle length

365 mm, Ø20 mm

For

Makro•Grip ®

For

Makro•Grip ®

For

Makro•Grip ®

40

Clamping range

in mm

Clamping range

in mm

Clamping range

in mm

Weight

in kg

(47065) 2 x 25 mm 0,20 47065-TG

(47105) 2 x 45 mm 0,25 47105-TG

(47145) 2 x 65 mm 0,30 47145-TG

Weight

in kg

Weight

in kg

Order No. Price

Order No. Price

(47085) 2 x 35 mm 0,55 47085-TG

(47120) 2 x 50 mm 0,60 47120-TG

(47160) 2 x 70 mm 0,70 47160-TG

(47200) 2 x 90 mm 0,75 47200-TG

Order No. Price

(47155) 2 x 65 mm 1,30 47155-TG

(47205) 2 x 90 mm 1,35 47205-TG

(47255) 2 x 115 mm 1,50 47255-TG

(47305) 2 x 140 mm 1,60 47305-TG

(47355) 2 x 165 mm 1,70 47355-TG


Twin•Grip 46

Twin•Grip 77

Twin•Grip 125

41

Twin•Grip

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Convert your profile clamping vice

into a dual-clamping vice!

Spindle and middle base jaw 112x46 mm for profile clamping vice 77

Description/Type

For profile

clamping

vice

Distance x in

mm

42

Weight

in kg

Order No.

Spindle length 175 mm, Ø16 mm (49080) 2 x 18 1,05 49080-TG

Spindle length 215 mm, Ø16 mm (49120) 2 x 36 1,10 49120-TG

Spindle and middle base jaw 160x57mm for profile clamping vice 125

Description/Type

For profile

clamping

vice

Distance x in

mm

Weight

in kg

Order No.

Spindle length 215 mm, Ø20 mm (49100) 2 x 20 2,5 49100-TG

Spindle length 265 mm, Ø20 mm (49150) 2 x 45 2,6 49150-TG

Spindle length 315 mm, Ø20 mm (49200) 2 x 70 2,7 49200-TG

Spindle length 365 mm, Ø20 mm (49250) 2 x 95 2,8 49250-TG

Price

in €

Price

in €


Base jaws, for retrofitting Twin•Grip vices

Base jaws for Twin•Grip

Description/Type

Base jaws for Twin•Grip 77, 3 pcs. incl. location tenons and

screws, 112x46 mm

Base jaws for Twin•Grip 125, 3 pcs. incl. location tenons and

screws, 160x57 mm

Soft add-on jaws for Twin•Grip

Description/Type

Soft add-on jaws for Twin•Grip 77, steel, 3 pcs.,

112x57x36 mm, material: 16MnCr5

Soft add-on jaws for Twin•Grip 77, aluminum, 3 pcs.,

112x57x36 mm, material: AlZnMgCu 1,5

Soft add-on jaws for Twin•Grip 125, steel, 3 pcs.,

160x57x47 mm, material: 16MnCr5

Soft add-on jaws for Twin•Grip 125, aluminum, 3 pcs.,

160x57x47 mm, material: AlZnMgCu 1,5

43

Weight

in kg

Weight

in kg

Twin•Grip profile clamping

Order No.

5,3 49774

1,8 49775

13,3 49254

4,8 49255

Order No.

2,2 49772

6,1 49252

Price

in €

Price

in €

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Our proven Vario•Tec system as a "mini-version"

for Makro•Grip ® 77

Ideal for the delicate parts of medical engineering, jewellery or precision industry

Vario•Tec 77

Description/Type

Vario•Tec 77

base length 130 mm

Vario•Tec 77

base length 170 mm

Vario•Tec 77

base length 210 mm

equipped with Vario•Tec adaptation

support system 77

thread to attach stoppers

Clamping range

in mm

Weight in kg Order No. Price

55 3,5 42055

95 4,1 42095

135 4,8 42135

44

position accuracy of support

pins ± 0.01 mm

pins are blown out by

air pressure pistol row by row

NEW!


45

Vario•Tec 77

Vario•Tec centre vice with

Quick•Point ® zero-point clamping

system (5-face machining).

Fa. Manz Automation, Tübingen

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Vario•Tec – the perfect clamping system for

universal machining tasks

Ideal support and stopper possibility for all kinds of work pieces

Vario•Tec 125

Description/Type

Vario•Tec 125

base length 210 mm

Vario•Tec 125

base length 260 mm

Vario•Tec 125

base length 310 mm

equipped with Vario•Tec

adaptation support

system 125

Vario•Tec 125

base length 360 mm

Clamping range

in mm

Weight in kg Order No. Price

100 12,1 42100

150 14,0 42150

200 16,3 42200

250 18,4 42250

46

position accuracy of

support pins ± 0.01 mm

pins are blown out by

air pressure pistol row by row


Work pieces can be located in an angle of 45 or 90 degrees

on pin grid.

47

Vario•Tec 125

Movable pins make parallels obsolete. Pins can be used as a

stopper or as a support.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Spindle covers stop chip clogging!

2 types available:

For serial parts:

Cover that snaps into the

guidance

Covers can be trimmed to the respective clamping range.

Spindle cover plastic

Description/Type Amount Order No. Price

for Makro-Grip 77,

40 x 70 mm

for Makro-Grip 125,

74 x 100 mm

10 pcs.

47077-70

47125-70

48

Spindle cover industrial foam

Description/Type Amount Order No.

for Makro-Grip 46,

width 10 mm

for Makro-Grip 77,

width 20 mm

for Makro-Grip 125,

width 30 mm

10 pcs.

Spindle covers

For single or serial parts:

Flexible spindle cover made of

industrial foam

Foam covers are inserted in the space either side of the

vice. Upon tightening the jaws, the foam is almost fully

compressed returning to its original size on release.

47046-80

47077-80

47125-80

NEW !

Price

in €


49

Tungsten Carbide coating

Tungsten Carbide coating for increasing friction

force – for Makro•Grip ® and Twin•Grip

Tungsten Carbide coating for higher holding

power of work pieces with smooth surfaces

Tungsten Carbide coating

Description/Type Order No. Price

Makro•Grip ® 46 45046-17

Twin•Grip 46 45046-15

Makro•Grip ® 77 45077-17

Twin•Grip 77 45077-15

Makro•Grip ® 125 45125-17

Twin•Grip 125 45125-15

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ®

50


51

Quick•Point ®

grid pallets

Page 56

Quick•Point ®

rectangular pallets

Page 60

Quick•Point ®

round pallets

Page 62

Quick•Point ®

round pallets with centre bore

Page 66

Quick•Point ®

adaptor pallets

Page 68

Quick•Point ®

sub-bases

Page 69

Quick•Point ®

twin-bases

Page 70

Quick•Point ®

support pallets

Page 72

Accessories

Page 73

Quick•Point ®

Tri•Top tombstone

Page 76

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® Zero-point clamping system – simple, safe

Only 27 mm high, the lowest Zero-point clamping pallet in the market

plastic covers for

mounting bores

mounting of pallet on machine

tool table by clamps or via

mounting bores (defined or on

customer's request)

high precision bore

with > 0.005 mm

tightening torque 30 Nm

52

4x M5 thread for 90 degree indexing

postion for batch production

sturdy, compact base plate

made of case-hardened quality

steel

alternatively, a hydraulic cylinder can be screwed in to

clamp or release studs by hydraulic power via machine

programme or by pneumatic-hydraulic power multiplier

height 27

± 0.01 mm


53

Quick•Point ®

and precise with highest holding power up to 6000 kg

Quick•Point ® offers ideal setting for Makro•Grip ® vices.

Quick•Point ® – not only highly precise, but also providing high mechanical load capacity. Example: Weight of work piece 175 kg,

height 525 mm. 4 clamping studs are directly screwed in the work piece.

Quick•Point ® provides multifunctional and flexible mounting of

different devices or fixtures on the machine tool table.

Easy adaptation of clamping different vices, fixtures or work

pieces by separate available clamping studs.

"Quick•Point ® is optimally qualified for clamping fixtures

quickly and with high repeatability." Fa. Spitzl, Stutensee

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Alignment & mounting of Quick•Point ® pallets

There are 3 possible ways to mount Quick•Point ® pallets to the machine tool table:

1. Mounting and alignment via t-slots

of the machine tool table

3. Round pallets can be aligned with the

12 H7 fit on the bottom of the pallet

54

2. Via clamps

Our Quick•Point ® pallets are available

with defined mounting bores for common

slot distances. Alternatively you

can set individual mounting bores.


Quick•Point ® – the versatile zero-point

clamping system

Universal 96 mm grid with Quick•Point ® grid pallets (item No. 45710)

Quickly - Safe - Precise! Quick•Point ® zero-point systems in

laser machines - type series LS. SITEC Industrie-

technologie GmbH, Chemnitz

55

Quick•Point ® can be used multifunctional, e.g. on indexers,

tombstones or milling machine tool tables.

Quick•Point ®

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® grid pallets

Quick•Point ® 52 PRICE

Ideal to create versatile and flexible clamping settings on the machine tool table. By stringing

together several of those pallets you get a universal grid.

Quick•Point ® grid pallet 104x104x27 mm, 52 mm stud distance

Description/Type Weight in kg Order No. Price

Quick•Point ® grid pallet, 52 mm stud distance,

104x104x27 mm

56

2,0 45600

Set mounting bores depending on customer's request – 45004

Set alignment grooves depending on customer's request – 45002

CUT!

Automation

makes it happen!


Quick•Point ® 96 PRICE

We recommend Quick•Point ® grid pallet 96 (45710) for larger machine tool tables and for the

adaptation of bigger clamping applications.

Quick•Point ® grid pallet 192x192x27 mm, 96 mm stud distance

Description/Type Weight in kg Order No. Price

Quick•Point ® grid pallet, 96 mm stud distance,

192x192x27 mm

57

7,2 45710

Set mounting bores depending on customer's request – 45004

Set alignment grooves depending on customer's request – 45002

Quick•Point ® grid pallets

CUT!

Automation

makes it happen!

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Alignment gauge for quick assembly

For simple assembly of Quick•Point ® grid pallets we recommend to apply the alignment gauge.

Precise aligning and dimensional accuracy of pallets is guaranteed.

Alignment gauge for Quick•Point ® grid pallets

Description/Type

Weight

in kg

58

Order No.

Alignment gauge 52 6,5 44152

Alignment gauge 96 11,6 44196

Alignment gauge 52 for rent (2 weeks) - 44152-10

Alignment gauge 96 for rent (2 weeks) - 44196-10

This high-precision gauge can be used for aligning Quick•Point ® raster pallets to each other by simply inserting the gauge in

2 or 4 plates and removing it again after tightening the mounting screws.

Price

in €


The versatility of Quick•Point ® pallets

has no limitations!

59

With the Quick•Point ® raster grid individual clamping fixtures

can be realized.

Also tombstones can be equipped with Quick•Point ® pallets according to your wishes.

Quick•Point ® grid pallets

All Quick•Point ® pallets can be activated by a bolt

from the bottom. That way also pneumatic

applications can be realized.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® 52

Quick•Point ® pallet 150x116x27 mm, 52 mm stud distance, with mounting bores

Description/Type Weight in kg Order No. Price

Quick•Point ® pallet 52 mm stud distance with mounting

bores and clamping edge

Quick•Point ® pallet 150x116x27 mm, 52 mm stud distance, without mounting bores

60

CAD

Download

www.lang-technik.de/

downloads

Description/Type Weight in kg Order No. Price

Quick•Point ® pallet 52 mm stud distance without mounting

bores or clamping edge

2,9 45150

3,4 45151

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002


Quick•Point ® 96

Quick•Point ® pallet 196x156x27 mm, 96 mm stud distance, with mounting bores

Description/Type Weight in kg Order No. Price

Quick•Point ® pallet 96 mm stud distance with mounting

bores and clamping edge

Quick•Point ® pallet, 192 x 156 x 27 mm, for 96mm stud diameter

61

5,5 45400

CAD

Download

www.lang-technik.de/

downloads

Description/Type Weight in kg Order No. Price

Quick•Point ® pallet 96 mm stud distance without mounting

bores or clamping edge

6,0 45401

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002

Quick•Point ®

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® 52 – Ø116 mm

Quick•Point ® round pallet Ø116 x 27 mm, 52 mm stud distance, with mounting bores

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø116 mm, 52 mm stud di-

stance with mounting bores

62

1,9 45750

Quick•Point ® round pallet Ø116 x 27 mm, 52 mm stud distance, without mounting bores

CAD

Download

www.lang-technik.de/

downloads

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø116 mm, 52 mm stud di-

stance without mounting bores

2,1 45751

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002


Quick•Point ® 52 – Ø157 mm

Quick•Point ® round pallet Ø157 x 27 mm, 52 mm stud distance, with mounting bores

63

Quick•Point ® 52

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø157 mm, 52 mm stud di-

stance with mounting bores

3,5 45900

Quick•Point ® round pallet Ø157 x 27 mm, 52 mm stud distance, without mounting bores

CAD

Download

www.lang-technik.de/

downloads

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø157 mm, 52 mm stud di-

stance without mounting bores

3,8 45901

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® 96 – Ø176 mm

Quick•Point ® round pallet Ø176 x 27 mm, 96 mm stud distance, with mounting bores

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø176 mm, 96 mm stud di-

stance with mounting bores

64

4,7 45800

CAD

Download

www.lang-technik.de/

downloads

Quick•Point ® round pallet Ø176 x 27 mm, 96 mm stud distance, without mounting bores

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø176 mm, 96 mm stud di-

stance without mounting bores

4,8 45801

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002


Quick•Point ® 96 – Ø196/Ø246 mm

Round pallets can be adapted to chucks of turn-milling-centres.

Please make sure that the pallet is set into the clamping jaws

sufficiently.

Quick•Point ® round pallets, 96 mm stud distance

65

CAD

Download

www.lang-technik.de/

downloads

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø196 mm, 96 mm stud

distance, without mounting bores

Quick•Point ® round pallet, Ø246 mm, 96 mm stud

distance, without mounting bores

Instead of centre bore 12H7, other diameters can be inserted

on back side of pallet. Price on request.

6,0 45820

9,5 45840

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002

Quick•Point ® 96

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® 52 – with 38 H7 centre bore

Quick•Point ® pallet with centre bore. Ideal for rotary tables with bar feeder and air/hydraulic connections.

Please notice: Clamping via 2 opposing screws.

NEW !

Quick•Point ® round pallet, Ø157 mm, with centre bore 38 H7 , 52 mm stud distance

66

Ø 38 H7

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø157 mm, with centre bore 38 H7 ,

52 mm stud distance

-- 45902

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002

CAD

Download

www.lang-technik.de/

downloads


Quick•Point ® 96 – with 62 H7 centre bore

CAD

Download

www.lang-technik.de/

downloads

Quick•Point ® round pallets, with centre bore 62 H7 , 96 mm stud distance

Description/Type Weight in kg Order No. Price

Quick•Point ® round pallet, Ø176 mm,

with centre bore 62 H7 , 96 mm stud distance

Quick•Point ® round pallet, Ø196 mm,

with centre bore 62 H7 , 96 mm stud distance

Quick•Point ® round pallet, Ø246 mm,

with centre bore 62 H7 , 96 mm stud distance

67

4,1 45802

5,4 45822

8,9 45842

Set mounting bores depending on customer's request -- 45004

Set alignment grooves depending on customer's request – 45002

Quick•Point ® 96

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


From big to small – these adaptor pallets

are the answer!

Reduction of grid from 96 mm to 52 mm

Quick•Point ® adaptor pallet

52 mm

96 mm

Description/Type Weight in kg Order No. Price

150x126 mm, reduction from 96 to 52 mm stud distance 3,4 45160

Quick•Point ® adaptor pallet, round

52 mm

96 mm

Description/Type Weight in kg Order No. Price

Ø157 mm, reduction from 96 to 52 mm stud distance 3,7 45910

68


69

Quick•Point ® adaptor pallets

Sub-base for Quick•Point ® pallets – Increase accessibility

to work piece on 5-face machine tools

Sub-base for Quick•Point ® 52 (150x116 mm)

Description/Type Weight in kg Order No. Price

Height 60 mm 2,5 43060

Height 100 mm 4,2 43100

Sub-base for Quick•Point ® 96 (192x156 mm)

Description/Type Weight in kg Order No. Price

Height 60 mm 4,7 44060

Height 100 mm 7,9 44100

Compatible to Quick•Point ® pallets 45150 abd 45400. Coated aluminum sub-

base designed with clearance for easy mounting and alignment to table (20 H7

bore) or use clamping studs to clamp sub-base on Quick•Point ® pallet

Included in delivery:

4x M10 screw + 2x alignment pins to position Quick•Point ® pallet

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Twin-base with integrated Quick•Point ® system, high

strength and sturdy, case-hardened and ground

rectangular to 0.01 mm

Quick•Point ® twin-base 52

Description/Type Weight in kg Order No. Price

Double-sided zero-point clamping for 52 mm stud pattern 13,8 47220

4 x 90°

Ideal for manual 5-face machining

of work piece by turning

workholding device with clamped

work piece 4x 90degrees using

a 3-axis machine tool. Result is

high repeat accuracy and controlled

process of work piece.

70

Quick•Point ® 52


Quick•Point ® twin-base 96

Description/Type Weight in kg Order No. Price

Double-sided zero-point clamping for 96 mm stud pattern 28 47520

71

Quick•Point ® 96

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Soft support pallets, made of steel – for individual adaptation

of fixtures and other devices

Support pallets 52

Type LxWxH Weight in kg Order No. Price

96 x 96 x 27, 52 mm stud distance 2,0 45275

156 x 156 x 27, 52 mm stud distance 5,2 45277

Use support pallets to adapt and strip down fixtures quickly

Support pallets 96

Type LxWxH Weight in kg Order No. Price

156 x 156 x 27, 96 mm stud distance 5,3 45575

196 x 196 x 27, 96 mm stud distance 8,3 45577

Use support pallets to adapt and strip down fixtures quickly

72


Gauging pallet for precise alignment of Quick•Point ® pallets

ca. 100 mm

ca. 125 mm

Gauging pallet 52

Type Order No. Price

for 52 mm stud distance 44252

- Size of Gauge 100 mm Square

- Case-hardened and ground

Gauging pallet 96

Type Order No. Price

for 96 mm stud distance 44296

- Size of Gauge 125mm Square

- Case-hardened and ground

73

Quick•Point ®

Recommended for rotating axis or chucks.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® clamping studs – for individual adaptation of your

existing vices, fixtures or work pieces in our Quick•Point ® zeropoint

clamping system

Mounting of Quick•Point ® clamping studs

Quick•Point ® clamping studs are perfectly

suitable for stripping down or activating fixtures.

Clamping studs for self installation of fixtures

Type Amount Order No. Price

Clamping stud Ø16 mm, for

52 mm stud pitch

Clamping stud Ø20 mm, for

96 mm stud pitch

74

1 pc. 45270

1 pc. 45570

Utilize studs in vices, fixtures or work pieces and clamp easy and quickly

in our precise Quick•Point ® pallet system

Mit Schrauben

52 96 52

96

via threaded bolt via screws

Place the 4 studs with an accuracy of ± 0.01 mm

squared!


Remove tightening screw and turn in hydraulic cylinder! Fits

all Quick•Point ® pallets.

Quick•Point ® cover plugs

Description/Type Amount Order No. Price

Quick•Point ® cover plugs Ø16

mm, for 52 mm stud pitch

Quick•Point ® cover plugs Ø20

mm, for 96 mm stud pitch

75

1 set

(4 pcs.)

1 set

(4 pcs.)

45052-20

45096-20

Cover plug for protection against material polution when not in use.

Quick•Point ® plastic cover

Description/Type Amount Order No. Price

Plastic cover Ø20 mm

1 set

(20 pcs.)

45008

Protects mounting bores against material polution, suitable for both stud

pitches (52 mm and 96 mm).

Quick•Point ® hydraulic cylinder

Description/Type

Screw-in hydraulic cylinder,

single, incl. angled screw

coupling (90 degrees)

Weight

in kg

Order No.

0,2 64310

- For automatic clamping of Quick•Point ® pallets

- Hydraulic pressure 70 to 200 bar

- Several hydraulic cylinders can be interlinked

Quick•Point ®

Price

in €

Simple laying of hydraulic pipes from machine table outside

to the pneumatic pressure multiplier.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Tri•Top 3-face tombstone

Minimizes shutdown times of your 4-/5-face machine!

hardened fit bushings

for longevity and

precision

NEW !

light-weight aluminum base

for an ergonomic handling

simple zero-point clamping

with one screw

76

Quick•Point ® 52 system

on all three sides

applicable for LANG

automation systems

incl. clamping studs for fast and accurate

clamping with Quick•Point ® 96


77

Tri•Top

Due to the sturdy and compact design our "all-round" vices

can be turned by 4x 90° with marginal interference

Typical 5-face machining of work pieces. Reduce your

tool-change times by multiple clamping.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Tri•Top 3-face tombstone

Tri•Top 3-face tombstone

Description/Type Dimensions Weight in kg Order No. Price

Tri•Top 3-face tombstone 52

Height: 167 mm

Diameter: 178 mm

(without bump stops)

78

5,5 45352


79

3-face clamping provides tremendous accessibility of

your tools

Tri•Top

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Tower

80


81

Quick•Tower

base bodies

Page 85

Quick•Point ®

zero-point pallets

Page 86

Makro•Grip ® 77

centre vices

Page 88

Eco•Grip 125

centre vices

Page 92

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Tower – clamping system

for horizontal machines!

Flexible, reasonable priced and rigid!

82

Work piece in workholding

device can be

rotated quickly and

precisely by 90 degrees

Instead of 3 sides, 5 sides

can be machined

Individual set-up of tombstone

using Quick•Point ®

pallets

Compatible with all of

LANG's workholding

devices

Low vibrations by stable

cast body

Machine running time

can be increased by

multiple clamping


83

Quick•Tower

Various applications of Quick•Tower for single and serial parts

All around batch production

Individual clamping set-up with Quick•Point ® zero-point

system

Long workpiece up to approx. 800 mm can be machined safely with

Quick•Tower

Repeated mounting of your fixture: Shut down and set up within

seconds!

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Simple mounting to machine table

84

Alternatively an individual hole pattern according to

customer's request can be inserted to mount the tower directly

on the machine table.

12 Quick•Point ® clamping studs are included as standard

- For quick and accurate adaptation of the tower to 4 grid

pallets (45710).


Quick•Tower base body

Precise machined surface with plane

parallelism of ± 0.02 mm on total height

Grip of 150 x 120 mm is designed

to mount Quick•Point ®

pallets 75710.

Quick•Tower base body

Description/Type Total height in mm Weight in kg Order No. Price

Quick•Point ® base body 650

Body: 192 x 192 mm

Base: 384 x 384 mm

Quick•Point ® base body 850

Body: 192 x 192 mm

Base: 384 x 384 mm

Individual mounting hole pattern

on customer's request

668 130 70650

860 160 70850

- - 70004

85

Quick•Tower

Grip 82 x 82 mm is designed

to mount Quick•Point ® pallets

75600

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


13x 52 mm grid on every side

grid

52

52

52

52

Quick•Point ® 52

Description/

Type

Quick•Point ®

52 mm stud

distance

Dimension

in mm

104 x 104

Height: 27

86

Tower 70650, height 668

max. 5 pallets on each side

Tower 70850, height 860

max. 7 pallets on each side

Weight

in kg

Order

No.

1,8 75600

Amount

up to 15

16 to 49

from 50

Price

per piece

*Block pricing only applies for a purchase of Quick•Tower


7x 96 mm grid on every side

grid

96

96

96

Quick•Point ® 96

Description/

Type

Quick•Point ®

96 mm stud

distance

87

Quick•Tower zero-point pallets

Dimension

in mm

192 x 192

Height: 27

Weight

in kg

Order

No.

246 mm

Tower 70650, height 668

max. 3 pallets on each side

5,8 75710

246 mm

Tower 70850, height 860

max. 4 pallets on each side

Amount

up to 10

11 tp 29

from 30

Price

per piece

*Block pricing only applies for a purchase of Quick•Tower

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ® – Ideal centre vice for serial parts

– machining with best accessibility

additional clamping location for

non-stamped work pieces and

semi-finished parts

double guidance for jaws

with integrated slot nuts

Makro•Grip ® 77, clamping range 120 mm

Description/Type

Makro•Grip ®

jaw width 77 mm

52 mm stud distance

Dimensions

in mm

base length:

130

clamping range:

0 - 120

equipped with double-sided holding

teeth contour. Resting height 3 mm

centring accuracy

± 0.02 mm

Weight

in kg

3,1 47120

88

Order No. Amount

activate a larger clamping range

by turning around the jaws within

one minute.

up to 15

16 to 49

from 50

thread to attach

stoppers

Price

per piece

Block pricing only applies for a purchase of Quick•Tower


Tower 70650, height 668 mm, max. 3

vices upright and max. 5 vices lateral

on each side

Tower 70850, height 860 mm, max. 5

vices upright and max. 7 vices lateral

on each side

Marginal interference diameter thanks

to compact design

89

Quick•Tower vices

Regardless of which clamping device – Quick•Tower provides a maximum

of flexibiliy. Martin Baker Aircraft Co. Ltd

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Makro•Grip ® profile clamping vice – castings, valves, ...

Express your creativity!

soft add-on jaws made of steel or

aluminum – mounted to the base

jaws via threaded screws

double guidance for jaws

with integrated slot nuts

Makro•Grip ® 77 profile clamping vice

Description/Type

Makro•Grip ® 77

profile clamping

vice, 52 mm stud

distance

Dimensions

in mm

base length: 130

max. distance

between jaws: 40

centring accuracy

± 0.02 mm

Weight

in kg

At page 36 you will find the fitting add-on

jaws. Alternatively you can manufacture

them by yourself. (Drawings on request)

3,7 49040

90

Dimensions of centre vice – see page 34

Order No. Amount

up to 15

16 to 49

from 50

hardened

base jaws

Price

per piece

Block pricing only applies for a purchase of Quick•Tower


Tower 70650, height 668 mm, max. 3

vices upright and max. 3 vices lateral

on each side

Tower 70850, height 860 mm, max. 5

vices upright and max. 5 vices lateral

on each side

91

Quick•Tower vices

Marginal interference diameter thank

to compact design Individual grid set-up possible also spaced over two pallets

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Grip – ergonomic assembly by light-weight

aluminum base body (only 6.3 kg)!

patented reversible jaws for

large clamping range

colour-indicators for

bilaterally correct

insertion

hardened guidance made of steel -

integrated in aluminum base body

Eco-Grip 125, clamping range 155 mm

Description/Type

Eco•Grip 125

Ø 178 mm

+ bump stop

Height 89 mm

Dimensions

in mm

clamping range:

0 - 155 mm

jaw width:

125 mm

equipped with double-sided holding

teeth contour. Resting height 3 mm

centring accuracy

± 0.02 mm

Weight

in kg

ergonomic

recessed grip

6,3 67155

92

Order No. Amount

vices with a fixed jaw in various

sizes available upon request.

thread to

attach

stoppers

up to 9

10 to 29

from 30

Price

per piece

Block pricing only applies for a purchase of Quick•Tower


Simple handling thanks to light-weight aluminum base body with hardened steel guidance

Marginal interference diameter thanks

to compact design

Tower 70650, height 668 mm,

max. 3 vices on each side

93

Quick•Tower vices

Tower 70850, height 860 mm,

max. 4 vices on each side

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Grip profile clamping vice – for bulky profile parts

hardened guidance made

of steel – integrated in

aluminum base body

Eco•Grip profile clamping vice 125

Description/Type

Eco•Grip 125,

profile clamping vice,

96 mm stud distance

Dimensions

in mm

base length:

180 mm

max distance between

jaws: 50 mm

centring accuracy

± 0.02 mm

On page 36 you will find the fitting add-on

jaws. Alternatively you can manufacture

them by yourself. (Drawings on request)

Weight

in kg

7,7 69050

94

Order No. Amount

up to 9

10 to 29

from 30

hardened

base jaws

Price

per piece

Block pricing only applies for a purchase of Quick•Tower


Batch production of casting parts clamped in soft profile jaws

Marginal interference diameter

thanks to compact design

Tower 70650, height 668 mm,

max. 3 vices on each side

95

Quick•Tower vice

Tower 70850, height 860 mm,

max. 4 vices on each side

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Automation

96


97

Eco•Tower

automation system

Page 102

Eco•Compact

automation system

Page 106

Eco•Grip ®

clamping devices

Page 112

Quick•Point ®

base towers

Page 120

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Tower can be installed and adapted to every machini

customers:

Front-loading with Hermle B300:

"Lang's Eco•Tower meets the criteria for a modern automation system: Simple

handling, reliability and a resonable purchase price. Furthermore we get everything

- zero-point system, clamping vices,... - from one source!"

Fa. Peter Merkl Präzisionsfertigung, Gilching

Eco•Tower with Mazak Variaxis 500-5X II DMU 40 monoBlock

98


ng centre. Here are some impressions of our satisfied

Hedelius RS 80 Magnum

Front-loading of Spinner VC1160

99

Eco•Tower Automation

„With the Lang Technik Automation system you get flexibility and the machining

centre now works 8 to 10 hours longer“

Franz Walter GmbH, Maulbronn

Side-loading of DMU 50 eVolution

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


One week with LANG automation

Increased profit for every batch size. Please pay attention

to the long cutting time (blue blocks)!

Duration analysis of

the same machining

centre WITH LANG

automation

= machining time

"Thanks to the LANG automation system we were able to increase the productivity of our 5-face machining centre dramatically.

Now we are able to finish tasks with high machining capacity in a short period of time. Besides we are convinced by the

simplicity of the system. We are going to keep investing in LANG technique in the future ..."

Uwe Zitelmann, Manager OZT GmbH, Oyten

100

Duration analysis of

a MAZAK Variaxis 500

WITHOUT LANG automation

= machining time


Quick and flexible preparation of work

pieces for the automated production

1 2

3

4 5

101

Automation

Sawing of work pieces Immediate stamping of Grip•Fix contour into work piece

Clamping work piece into Makro•Grip ® vice

Deposit Makro•Grip ® vice in lift Acceleration of vice into Eco•Tower

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Simple and advantageous

introduction to Automation!

Only small floor space required, because factory height

is well-utilized

Quick installation and training (max. 1-2 days)

Simple and user-friendly functional principle

No housing needed because of low pneumatic forces

Increased economic efficiency thanks to low purchase price

and operating costs

Manual operation still possible

Complete automation solution from one source: work piece

storage, -handling, clamping devices and zero-point clamping

system

102


Eco•Tower – Patented work piece storage

system for all machining centres

spiral for high storage capacity

in confined space

Eco•Tower work piece storage and handling system

Description/Type

ergonomic working: Easy

placement with blanks and fast

removal of finished parts

automation system

height 3,00 m

max. amount of pallets

Eco•Grip 77

(67160)

Eco•Grip 125

(67205)

60 45

103

Weight

in kg

Storage: 700

Handling: 450

Eco•Tower Automation

simple operation, easy

to learn

handling system, powered with

low pneumatic forces. Therefore

no housing needed

Order No. Price

69060

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Choose the most suitable

set-up for your shop floor!

Type 01

Type 03

min 3200

ca 800

2330

1415

max 850 (1050) 850

max 850 (1050) 850

2330

1415

ca 800

min 3200

104

Type 02

Type 04

2330

1415

850 max (1050) 850

min 3200

ca 800

Download

www.lang-technik.de/

downloads

According to customer's wishes we are able to install a side window in the machining centre or automate the front door with a

pneumatic cylinder.

ca 800

min 3200

850 max (1050) 850

1415

2330


Option: 90 degree swivel gripper for loading

indexers.

Optionally the Eco•Tower is also available in other

sizes to increase the storage capacity even more.

105

Eco•Tower types & options

More options for your individual solution.

Our experts enjoy advising you!

With 90 degree swivel gripper you are able to load

indexers. Hence you are able to machine 5 faces

with a 3-axis machining centre.

Cover steel plate for guides of handling system can

be delivered upon request.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Compact – Automation system for

Little space required

Favourable purchase price

Quick and easy assembly

Over-sized work pieces can be assembled, by loading only

every second pallet location

Reloading of storage pallet is possible at any time

> best accessibility

Low pneumatic driving forces (approx.15 kg), can be stopped

by hand at any time

106


atches up to 10 (optional up to 30)!

107

Eco•Compact Automation

Reloading is possible at any time. Due to low pneumatic driving forces the automation system is perfecly

designed for the "man and machine principle".

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Example of use of some equipped m

Eco•Compact with DMU 50 eVolution

108

Hurco VM1

Eco•Compact automation is a simple and reliable

system. Assembled rapidly it was ready for

operation instantly.

Richard Gjuga,

Fa. Richard Gjuga

Maschinenbau GmbH


achining centres

Eco•Compact with linear guides...

109

Eco•Compact Automation

... to ensure accessibility to machining centre.

Side-loading with Eco•Compact

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Compact – small-sized and flexible

assistant for all machining centres.

Eco•Compact work piece storage and handling system

Description/Type

simple operation,

easy to learn

easy accessible

loading table

Eco•Compact

work piece storage and handling system

for a batch size of 10

NEW!

Max. amount of

pallets

110

handling with integrated pneumatic

interface for Quick•Point ®

base towers

stable substructure for simple

connection to the machining

centre and quick initiation

Weight in kg Order No. Price

10 565 68810


Which type fits your

machining centre?

Type 01

Further options:

max 850 (1050) 850

Eco•Compact is also available with linear

guides upon request. The whole equipment

can be moved to increase accessibility with

front-loading.

1330

2700

111

Eco•Compact Automation

Type 02

max 850 (1050) 850

Download

www.lang-technik.de/

downloads

Eco•Compact is optionally available

with a storage capacity of 20 or 30.

2700

1330

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Grip 77 centre vice

The "allrounder" with best accessibility for all clamping tasks

hardened guidance made of

steel provide longevity

colour-indicators for

bilaterally correct insertion

Eco•Grip 77

Description/Type Dimensions

Eco•Grip 77

Ø 178 mm

+ bump stop

height 89 mm

Quick•Point ® clamping studs

for zero-clamping

clamping range:

0–160 mm

jaw width:

77 mm

ergonomic recessed grip

Weight

in kg

5,2 67160

112

equipped with reversible

Makro•Grip ® jaws and and additional

clamping location for

non-stamped work pieces

Order No. Amount

light-weight aluminum

base body

Eco•Grip 77 from below: With

sealing for secure clamping in

Quick•Point ® base towers

up to 15

16 to 29

from 30

Price

per piece


Even high parts can be machinied safely due to Grip•Fix

technology.

113

Automation > Eco•Grip 77

77

Great accessibility of Eco•Grip centre vice.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Eco•Grip 125 centre vice

Our "champion" for work pieces up to 205 mm length.

hardened guidance made of

steel provide longevity

colour-indicators for

bilaterally correct insertion

Eco•Grip 125

Description/Type

Eco•Grip 125

Length 210 mm

+ bump stop

height 89 mm

equipped with Quick Point 96

clamping bolts for zero clamping

Clamping

range in mm

Clamping range

0–205 mm

jaw width

125 mm

ergonomic recessed grip

for handling system

Weight

in kg

7,3 67205

114

equipped with reversible

Makro•Grip ® jaws and and

additional clamping location

for non-stamped work pieces

Order No. Amount

light-weight aluminum

base body

Eco•Grip 125 from below: With

sealing for secure clamping in

Quick•Point ® base towers

up to 9

10 to 29

from 30

Price

per piece


Eco•Grip vice with fixed jaw available upon request.

Eco•Grip vice with fixed jaw

115

Automation > Eco•Grip 125

Large clamping range due to reversible jaws.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Double Twin•Grip 77

Ideal for batch production of small parts - Up to 4 parts in one clamping!

exchange the middle jaws with the

included centre pieces and get a dualclamping

vice with an increased clamping

range up to 200 mm!

Double Twin•Grip 77

Description/Type

Double Twin•Grip 77

total length 210 mm

+ bump stops

height 89 mm

Clamping

range

Weight

in kg

4x 90 mm 9.8 67090

116

increased clamping range due to

patented reversible jaws

light-weight aluminum base body

with integrated adaptation for

handling system

Order No. Amount

up to 9

10 to 29

from 30

NEW!

Price

per piece


Clamping of 4 work pieces with Double Twin•Grip.

Eco•Compact - 6th-side machining for long

processing time.

Automation > Double Twin•Grip 77

117

Double Twin•Grip attached to Quick•Tower (see page 87).

Mounting of 64 work pieces possible!

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Automation support pallets, Ø 178 mm

Ideal support system for fixtures, clamping devices or work pieces

colour-indicators for bilaterally correct

insertion

support pallet

without bores

Support pallet, incl. fit bushings

Description/Type

Support pallet, aluminum, Ø178 mm + bump

stop, with hole pattern as per drawing

Support pallet, steel, Ø178 mm + bump stop,

without hole pattern

Support pallet, aluminum, Ø178 mm + bump

stop, without hole pattern

4 bores with fit for mounting

of clamping devices or work

pieces

equipped with Quick•Point ® 96

clamping studs

Height

in mm

118

Diameter

in mm

incl. fit bushings 12H7 to align

centre vices 46 and 77

Weight

in kg

24 ± 0,02 178 1,7 65191

24 ± 0,02 178 5,8 65192

24 ± 0,02 178 1,8 65193

sturdy base body made

of aluminum or steel

ergonomic recessed grip

for handling system

Order No. Price


With support pallet our Makro•Grip ® vices can be mounted

without modification.

119

Automation > Support pallets

Even work pieces can be automated with support pallets.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® base tower 96 – Flexible solution

for adaptation in zero-point pallets

ground pallet,

easy to clean

two different

sizes available:

80 mm and

100 mm

incl. clamping studs for

fast pull down or set up in

Quick•Point ® 96 zero-point

pallets

Quick•Point base tower 96, Ø176 mm

Description/Type

Quick•Point ® base tower 96

with clamping studs

Quick•Point ® base tower 96

with clamping studs

Height

in mm

pneumatic interface to

clamp, release and control

Mounting to

Quick•Point ®

120

highest clamping

forces due to patented

wedge closing design

interface adapter for manual operation

of the base tower. Can be connected to

a pneumatic hose or operated directly

with a compressed air pistol.

Weight

in kg

80 pallets 96

via clamping

studs

8,6 65850-080

100 10,0 65850-100

Order No. Price


If base tower is clamped with Quick•Point ® , it is set up or shut

down within seconds.

Automation > Quick•Point ® base tower

121

Automatic exchange of centre vice in Quick•Point ® base tower

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Quick•Point ® base tower 96 with collar for direct

mounting on machine tool table

highest clamping forces due

to patented wedge closing

design

two different sized

available: 80 mm

and 100 mm

strong Base for direct mounting

on the machine table(alternatively

the unit can be set up on a

Quick•Point ® 96 pallet).

ground pallet,

easy to clean

Quick•Point ® base tower 96, Ø176 mm, with collar Ø248 mm

Description/Type Height in mm

Quick•Point ® base tower 96

with collar

Quick•Point ® base tower 96

with collar

pneumatic interface to

clamp, release and control

Diameter of collar

in mm

122

interface adapter for manual operation

of the base tower. Can be

connected to a pneumatic hose or

operated directly with a compressed

air pistol.

Weight

in kg

80 248 10,0 65800-080

100 248 11,5 65800-100

Order No. Price


Due to the operating pannel the zero-point system can be

handled manually.

Automation > Quick•Point ® base tower

123

In connection with Eco•Grip vice best accessibility in 5-face

machining.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Vario•Tec

124


125

Vario•Tec

jaws

Page 128

Vario•Tec

accessories

Page 129

Super•Vario

vice

Page 132

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Vario•Tec – A system for all common vices

How does it work?

The pins are blown out with compressed air row by row at high accuracy (±0,01 mm). Push back the pins not needed easily by

hand.

Lasermarkings facilitate accurate reproduction of fixture for repeating work pieces.

Also 45° angles can be achieved within seconds just by pushing in the pins accordingly. With accessories, e.g. angle-plates you

are able to fit on all defined angles you need easily. Your advantage: safe milling, better quality and higher repeatability.

126


Movable pins make expensive devices and

all existing parallels obsolete

All common vices can be retrofitted.

Even small and flat work pieces can be fixed and clamped easily, quickly and safely

in Vario•Tec jaws. No more damaging of parallels while drilling near to the jaw.

127

Vario•Tec

Jaws and pins are hardened

and ground, positioning accuracy

better than 0,01 mm at a length

of 100 mm.

In order to maintain best function of pins it is recommended to move all pins once a week and to leave them in raised position

while not using the vice (this avoids crusting of coolant).

With restring strips you achieve different

clamping heights in steps of 2 mm

quickly

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Choose the suitable size for your vice!

Thickness of all jaws 15 mm generally

E

A

C

128

Please check jaw dimensions

of your vice to match Vario•Tec!

Vario•Tec

Type

Jaw

width

Fixed jaw

Order No.

Movable

jaw

Order No.

Price per

jaw in €

A B

Dimensions

C D E

Standard* 125 22551 22552 125 40 80 15 M8

Standard** 160 26041 26042 160 50 100 20 M 8

Allmatic NC 125 22528 22529

125 40

88 12,3 M6

Allmatic 125 22521 22522

125 40

-

18 M10

Hilma 100 20011 20012

100 34

65

11

M6

Hilma 125 22511 22512

125 45

80

14 M8

Hilma 160 26011 26012

160 54 100 17 M10

Röhm 125 22581 22582 125 40 80 15,6 M8

* suitable for Arnold, Gressel and Kesel ** suitable for Arnold, Kesel and Röhm

D

B


72 mm

72 mm

30 mm

35 mm

Hint: When turning the angle plate 180 degrees you receive a

clamping depth of 1 mm - ideal for minimum clamping

129

Vario•Tec > accessories

Angle plates for clamping in sloping position, 3 mm

thick, hardened

Type Order No. Amount Price

5°, hardened 20105

10°, hardened 20110

15°, hardened 20115

20°, hardened 20120

25°, hardened 20125

30°, hardened 20130

35°, hardened 20135

40°, hardened 20140

45°, hardened 20145

- Higher accuracy of the angles

- Secure repeatability

- Higher milling feeds possible

Parallels, 12 mm height, 3 mm thick, hardened

Version

Length X in mm

1 pair

Order No. Amount Price

Parallels 125 20401 1 pair

Parallels achieve 2 different clamping heights of 2 + 4 mm

just by using them either top or bottom up. So small work

pieces can be fixed safely.

Easy cleaning of resting strip, repeated

positioning at high accuracy.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Prism for secure holding of round work pieces

Front

100 mm

Back

40 mm

Prism Standard

For batch production: Highest repeatability by fixing the prism at the jaw.

Type Order No. Amount Price

Prism Standard 20501 1

Mounting base, ground - For simple adjustment of the jaws.

No damaging of the cylinder‘s surface due to low clamping

forces. Fixation at Vario•Tec jaw simply by fitting on two particular

pins in one row and by tightening the lateral fixing screw.

For fixation of round material with a diameter from 5 to 55 mm.

130

Mounting base

Order No. Amount Price

20003 1

For simple adjustment of the jaws


Accessories for all Vario•Tec system

with pin diameter 6 mm

Ø 3,5 x 2 mm

Ø 4,5 x 1,5 mm

131

Spare pins, Ø6 mm

Vario•Tec > accessories

Order No. Amount Price

20001 5

Pins which are damaged by collision should be replaced.

Sealing for jaws

Order No. Amount Price

20002 1 pair

Please specify the width of your jaws when ordering! e.g.

125 mm, 160 mm, ...

Air pressure pistol

Order No. Amount Price

20004 1

• Ideal handling

• Perfect for Vario•Tec

• Best supply of air pressure

Sealing for pins, new version

Type Order No. Amount Price

New since

approx. 2002

Sealing for pins, old version

Type Order No. Amount Price

Older pins

before 2002

200010 100

Worn out sealings should be exchanged.

200011 100

Worn out sealings should be exchanged.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Super•Vario 96 precision vice

the only precision vice with integrated Vario•Tec adaptive

support system. Jaws are mounted from behind and therefore

no swarf accumulation on the clamping surface

low weight, only

about 10 kg

case-hardened steel,

sturdy construction for

the tough use in the work

shop

Highest repeat accuracy of your work

piece clamping in the micron range,

using a torque wrench.

132

easy disassembly of spindle by

pulling pin with internal thread


The solution for efficient milling, grinding,

drilling or measuring

quick adjustment of complete clamping

range by pulling pin and lifting

hatch with thread

clamping power up

to 1.8 tons

133

Super•Vario

alternatively, short spindle for narrow

spaces on the machine table.

Exchangeable within a minute!

set of 4 clamping studs included for

fitting into Quick•Point ® system

Integrated Vario•Tec jaws are completely sealed and allow clean and fast working. The tiresome removal of chips in holes and

spaces is not necessary anymore.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Super•Vario 96 mm jaw width

134

Super•Vario 96 mm, clamping range 0-120 mm

Typ Order No. Price

Super•Vario vice –

jaw width

96 mm complete

Included in delivery:

18000

15000

12000

9000

6000

3000

27096

1 x Vice complete (Weight 10,5 kg)

1 x Short spindle 135 mm

4 x Studs Ø16 mm for Quick•Point ® 52 mm

4 x Clamping jaws

1 x Hexagon wrench 90° angled

1 x Handle

Clamping force in N

Universal stopper

10 20 30 40 50 60

Super•Vario 96

Description/Type Order No. Price

Universal stopper 27095

- Ideal for positioning work pieces correctly

- Screw-on thread M8 – can be easily

operated without wrench

Torque

in Nm


Grip•Fix jaws

Attach jaws to your existing vice - Parallels with clamping depth of 3 mm included.

Type

E

Jaw

width

Order No.

Price

per pair

A

C

135

Dimensions

A B C D E

Standard* 125 421250 125 40 80 15 M8

Standard** 160 421600 160 50 100 20 M 8

Allmatic NC

Allmatic

Hilma

Hilma

Hilma

125

125

100

125

160

422527

422520

420010

422510

426010

125

125

100

125

160

40

40

34

45

54

88 12,3

18

65

80

100

11

14

17

D

M6

M10

M6

M8

M10

Röhm 125 422580 125 40 80 15,6 M8

* suitable for Arnold, Gressel and Kesel ** suitable for Arnold, Kesel and Röhm

Universal gripping jaws

Customize these jaws individually to your vice. Jaws case-hardened 57 HRc, 0.7 mm

deep. Material: 16MnCr5

Type Order No.

Price

per pair

A

Dimensions

B C D E

Universal Grip•Fix jaw 100 421035 100 35 individually

Universal Grip•Fix jaw 125 421240 125 40 individually

Universal Grip•Fix jaw 160 421650 160 50 individually

Thickness 15 mm

B

Grip•Fix jaws

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Clean•Tec

136


137

Clean•Tec

fan

Page 141

Clean•Tec

spare part kit

Page 141

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Save expensive compressed air – use Clean•Tec!

glass fibre compound with steel

centre core. Can be fitted in every

commercial shank of Ø20 mm

solid design with tension springs

allow safe opening and closing of

wings by centrifugal force even at

maximum revolution speed

Glass fibre wings open and close by switching on and off the machine tool spindle

138

strong wear resisting glass fibre

wings for a long service life - made

for tough applications


Cleaning with Clean•Tec power...

139

Clean•Tec

Exchange automatically from tool magazine. Rinse work pieces and fixtures by using interal coolant with

the spindle stopped.

Move the rotating Clean•Tec up to 100-150 mm clearance above

the work piece at 3-10 m/min. feed.

Ideal for cleaning work pieces prior to the automatic removal.

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Clean•Tec – the perfect partner

for our automation systems!

Chips and coolant belong inside

machining centres. We recommend

to clean work pieces prior to the

automatic removal to keep your

work shop tidy.

140


Ø 160 mm

Ø 260 mm

Ø 330 mm

Ø 68 mm

Ø 68 mm

Ø 20 mm

Ø 20 mm

Ø 68 mm

Ø 20 mm

82 mm 42 mm

42 mm

130 mm

42 mm

166 mm

141

Clean•Tec, Ø 160 mm

Type Order No. Amount Price

Clean•Tec

160

• Specific cleaning

30160 1

• Designed to clean surfaces of workholding

or blowing out water pockets

• Rotation from 6000 - 12000 rpm clockwise

with internal coolant bore

Clean•Tec, Ø 260 mm

Type Order No. Amount Price

Clean•Tec

260

30260 1

• Exchange Clean•Tec automatically from

tool magazine

• Ideal entry for all cleaning requirements

• Rotation from 5000 - 8000 rpm with internal

coolant bore - clockwise

Clean•Tec, Ø 330 mm

Type Order No. Amount Price

Clean•Tec

330

30330 1

• Cleaning of large surfaces and blow away

heavy chip emergance

• Rotation from 3000 - 8000 rpm clockwise

with internal coolant bore

Spare part kit, 4 pieces glass fibre wings and springs

Version Order No. Amount Price

Spare part kit 160 30164 1

Sparepartkit 260 30264 1

Sparepartkit 330 30334 1

Clean•Tec

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Order No. Description/Type Page

20001 Vario-Tec spare pins 131

200010 Vario-Tec sealing for pins, new version 131

200011 Vario-Tec sealing for pins, old version 131

20002 Vario-Tec sealing for jaws 131

20003 Vario-Tec mounting base, ground 130

20004 Vario-Tec air pressure pistol 131

20011 Vario-Tec jaw Hilma 100, fixed 128

20012 Vario-Tec jaw Hilma 100, movable 128

20105 Vario-Tec angle plate, 5° 129

20110 Vario-Tec angle plate, 10° 129

20115 Vario-Tec angle plate, 15° 129

20120 Vario-Tec angle plate, 20° 129

20125 Vario-Tec angle plate, 25° 129

20130 Vario-Tec angle plate, 30° 129

20135 Vario-Tec angle plate, 35° 129

20140 Vario-Tec angle plate, 40° 129

20145 Vario-Tec angle plate, 45° 129

20401 Vario-Tec parallels 125 mm 129

20501 Vario-Tec standard prism 130

22511 Vario-Tec jaw Hilma 125, fixed 128

22512 Vario-Tec jaw Hilma 125, movable 128

22521 Vario-Tec jaw Allmatic 125, fixed 128

22522 Vario-Tec jaw Allmatic 125, movable 128

22528 Vario-Tec jaw Allmatic NC 125, fixed 128

22529 Vario-Tec jaw Allmatic NC 125, movable 128

22551 Vario-Tec jaw Standard 125, fixed 128

22552 Vario-Tec jaw Standard 125, movable 128

22581 Vario-Tec jaw Röhm 125, fixed 128

22582 Vario-Tec jaw Röhm 125, movable 128

26011 Vario-Tec jaw Hilma 160, fixed 128

26012 Vario-Tec jaw Hilma 160, movable 128

26041 Vario-Tec jaw Standard 160, fixed 128

26042 Vario-Tec jaw Standard 160, movable 128

27095 Universal stopper 134

27096 Super-Vario 96 precision vice 134

30160 Clean-Tec Ø160 mm 141

30164 Clean-Tec spare part kit 160 141

30260 Clean-Tec Ø260 mm 141

30264 Clean-Tec spare part kit 260 141

30330 Clean-Tec Ø330 mm 141

30334 Clean-Tec spare part kit 330 141

41010 Centre marking tool 19

41010-01 Spare marking stud 19

41020 Gauging blocks 17

41111 Stamping jaws, standard 18

41111-01 Reconditioning of stamping jaws, standard 17

41112 Stamping jaws, High-End 18

41112-01 Reconditioning of stamping jaws, High-End 17

41140 Additional stamping unit 16

41140-HE Additional stamping unit, with High-End jaws 16

41200 Stamping unit, standard 14

41200-HE Stamping unit, with High-End jaws 14

142

Order No. Description/Type Page

41350 Stamping unit, extended 14

41350-HE Stamping unit, extended, with High-End jaws 14

41400 Mobile stamping unit 16

41400-HE Mobile stamping unit, with High-End jaws 16

420010 Grip-Fix jaws Hilma 100 135

42055 Vario-Tec 77, clamping range 55 mm 44

42095 Vario-Tec 77, clamping range 95 mm 44

42100 Vario-Tec 125, clamping range 100 mm 46

421035 Universal gripping jaws 100 mm 135

421240 Universal gripping jaws 125 mm 135

421250 Grip-Fix jaws Standard 125 135

42135 Vario-Tec 77, clamping range 135 mm 44

42150 Vario-Tec 125, clamping range 150 mm 46

421600 Grip-Fix jaws Standard 160 135

421650 Universal gripping jaws 160 mm 135

42200 Vario-Tec 125, clamping range 200 mm 46

42250 Vario-Tec 125, clamping range 250 mm 46

422510 Grip-Fix jaws Hilma 125 135

422520 Grip-Fix jaws Allmatic 125 135

422527 Grip-Fix jaws Allmatic NC 125 135

422580 Grip-Fix jaws Röhm 125 135

426010 Grip-Fix jaws Hilma 160 135

43060 Quick-Point 52 sub-base, 60 mm height 69

43100 Quick-Point 52 sub-base, 100 mm height 69

44060 Quick-Point 96 sub-base, 60 mm height 69

44100 Quick-Point 96 sub-base, 100 mm height 69

44152 Alignment gauge 52 58

44152-10 Alignment gauge 52 for rent 58

44196 Alignment gauge 96 58

44196-10 Alignment gauge 96 for rent 58

44252 Gauging pallet 52 73

44296 Gauging pallet 96 73

45008 Quick-Point plastic covers 75

45046-15 Titanium nitrite coating for Twin-Grip 46 49

45046-17 Titanium nitrite coating for Makro-Grip 46 49

45052-20 Cover plugs 52, Ø16 mm 75

45077-15 Titanium nitrite coating for Twin-Grip 77 49

45077-17 Titanium nitrite coating for Makro-Grip 77 49

45096-20 Cover plugs 96, Ø20 mm 75

45125-15 Titanium nitrite coating for Twin-Grip 125 49

45125-17 Titanium nitrite coating for Makro-Grip 125 49

45150 Quick-Point 52, 150x116 mm 60

45151 Quick-Point 52, 150x116 mm, without bores 60

45160 Quick-Point adaptor pallet, 150x126 mm 68

45270 Clamping studs 52, Ø16 mm 74

45275 Support pallet 52, 96x96x27 mm 72

45277 Support pallet 52, 156x156x27mm 72

45352 Tri-Top 3-face tombstone 78

45400 Quick-Point 96, 192x156 mm 61

45401 Quick-Point 96, 192x156 mm, without bores 61

45570 Clamping studs 96, Ø20 mm 74

45575 Support pallet 96, 156x156x27mm 72


Order No. Description/Type Page

45577 Support pallet 96, 196x196x27mm 72

45600 Quick-Point 52 grid pallet, 104x104 mm 56

45710 Quick-Point 96 grid pallet, 192x192 mm 57

45750 Quick-Point 52, Ø116 mm 62

45751 Quick-Point 52, Ø116 mm, without bores 62

45800 Quick-Point 96, Ø176 mm 64

45801 Quick-Point 96, Ø176 mm, without bores 64

45802 Quick-Point 96, Ø176 mm, Ø62H7 67

45820 Quick-Point 96, Ø196 mm, without bores 65

45822 Quick-Point 96, Ø196 mm, Ø62H7 67

45840 Quick-Point 96, Ø246 mm, without bores 65

45842 Quick-Point 96, Ø246 mm, Ø62H7 67

45900 Quick-Point 52, Ø157mm 63

45901 Quick-Point 52, Ø157mm, without bores 63

45902 Quick-Point 52, Ø157mm, Ø38H7 66

45910 Quick-Point adaptor pallet, Ø157 mm 68

47046-80 Spindle cover 46, foam 48

47065 Makro-Grip 46, clamping range 65 mm 26

47065-TG Retrofitting kit Twin-Grip 46, length 82 mm 40

47077-70 Spindle cover 77, plastic 48

47077-80 Spindle cover 77, foam 48

47085 Makro-Grip 77, clamping range 85 mm 28

47085-TG Retrofitting kit Twin-Grip 77, length 103 mm 40

47105 Makro-Grip 46, clamping range 105 mm 26

47105-TG Retrofitting kit Twin-Grip 46, length 122 mm 40

47120 Makro-Grip 77, clamping range 120 mm 28

47120 Makro-Grip 77, clamping range 120 mm 88

47120-TG Retrofitting kit Twin-Grip 77, length 135 mm 40

47125-80 Spindle cover 125, foam 48

47125-70 Spindle cover 125, plastic 48

47145 Makro-Grip 46, clamping range 145 mm 26

47145-TG Retrofitting kit Twin-Grip 46, length 162 mm 40

47155 Makro-Grip 125, clamping range 155 mm 30

47155-TG Retrofitting kit Twin-Grip 125, length 165 mm 40

47160 Makro-Grip 77, clamping range 160 mm 28

47160-TG Retrofitting kit Twin-Grip 77, length 175 mm 40

47200 Makro-Grip 77, clamping range 200 mm 28

47200-TG Retrofitting kit Twin-Grip 77, length 215 mm 40

47205 Makro-Grip 125, clamping range 205 mm 30

47205-TG Retrofitting kit Twin-Grip 125, length 215 mm 40

47220 Quick-Point twin-base 52 70

47255 Makro-Grip 125, clamping range 255 mm 30

47255-TG Retrofitting kit Twin-Grip 125, length 265 mm 40

47259 Profile jaws Makro-Grip 125 37

47305 Makro-Grip 125, clamping range 305 mm 30

47305-TG Retrofitting kit Twin-Grip 125, length 315 mm 40

47355 Makro-Grip 125, clamping range 355 mm 30

47355-TG Retrofitting kit Twin-Grip 125, length 365 mm 40

47469 Profile jaws Makro-Grip 46 37

47520 Quick-Point twin-base 96 71

47779 Profile jaws Makro-Grip 77 37

49010 Makro-Grip 77 with base jaws, 10 mm 34

143

Index (sorted by item #)

Order No. Description/Type Page

49040 Makro-Grip 77 with base jaws, 40 mm 34

49040 Makro-Grip 77, profile clamping vice 90

49050 Makro-Grip 125 with base jaws, 50 mm 35

49080 Makro-Grip 77 with base jaws, 80 mm 34

49080-TG Retrofitting kit Twin-Grip 77 profile, 175 mm 42

49100 Makro-Grip 125 with base jaws, 100 mm 35

49100-TG Retrofitting kit Twin-Grip 125 profile, 215 mm 42

49120 Makro-Grip 77 with base jaws, 120 mm 34

49120-TG Retrofitting kit Twin-Grip 77 profile, 205 mm 42

49150 Makro-Grip 125 with base jaws, 150 mm 35

49150-TG Retrofitting kit Twin-Grip 125 profile, 265 mm 42

49200 Makro-Grip 125 with base jaws, 200 mm 35

49200-TG Retrofitting kit Twin-Grip 125 profile, 315 mm 42

49250 Makro-Grip 125 with base jaws, 250 mm 35

49250-TG Retrofitting kit Twin-Grip 125 profile, 365 mm 42

49251 Base jaws for Makro-Grip 125 35

49252 Base jaws for Twin-Grip 125 43

49254 Add-on jaws steel, for Twin-Grip 125 43

49255 Add-on jaws aluminum, for Twin-Grip 125 43

49256 Add-on jaws steel, for Makro-Grip 125 36

49257 Add-on jaws aluminum, for Makro-Grip 125 36

49771 Base jaws for Makro-Grip 77 34

49772 Base jaws for Twin-Grip 77 43

49774 Add-on jaws steel, for Twin-Grip 77 43

49775 Add-on jaws aluminum, for Twin-Grip 77 43

49776 Add-on jaws steel, for Makro-Grip 77 36

49777 Add-on jaws aluminum for Makro-Grip 77 36

64310 Quick-Point screw-in hydraulic cylinder 75

65191 Support pallet aluminum Ø178 mm 118

65192 Support pallet steel Ø178 mm 118

65193 Support pallet aluminum Ø178 mm, without

bores

118

65800-080 Base tower 96, height 80 mm, with collar 122

65800-100 Base tower 96, height 100 mm, with collar 122

65850-080 Base tower 96, height 80 mm 120

65850-100 Base tower 96, height 100 mm 120

67090 Double Twin-Grip 77, clamping range 4x90 mm 116

67155 Eco-Grip 125, clamping range 155 mm 92

67160 Eco-Grip 77, clamping range 160 mm 112

67205 Eco-Grip 125, clamping range 205 mm 114

68810 Eco-Compact Automation 110

69050 Eco-Grip 125, profile clamping vice 94

69060 Eco-Tower Automation 103

70650 Quick-Tower 650 85

70850 Quick-Tower 850 85

75600 Quick-Point 52, 104x104 mm 86

75710 Quick-Point 192x192 mm 87

Grip•Fix

Makro•Grip ®

Quick•Point ®

Quick•Tower

Automation

Vario•Tec

Clean•Tec


Imprint

Titel:

LANG Programm 2011 (4. Ausgabe)

Drucklegung 8/2010

Pricee gültig bis zur Erscheinung des

neuen Kataloges

Editor:

LANG Technik GmbH

Zabergäustraße 5

D 73765 Neuhausen / F.

Tel.: +49 (0)7158 90 38 - 0

Fax: +49 (0)7158 72 40

www.lang-technik.de

e-mail: info@lang-technik.de

Legal provisions:

Copyright © 2010

LANG Technik GmbH

All rights reserved. Reprint, recording in online-services, internet and duplication on

data carrier as CD ROM, DVD, etc., or in extracts are prohibited. Misprints, errors

and changes are subject to modifications. All indications of weight are approximate

values. Illustrations can vary from articles.

144

More magazines by this user
Similar magazines