Flygt Wastewater pumps 3045, 3057 - Anadolu Flygt

Flygt Wastewater pumps
3045, 3057
For groundwater and sewage (50Hz)

Reliable submersibles for
residential, commercial and lightindustrial
applications
Built to last
That’s precisely what
you’d expect from compact
pumps made by ITT
Water & Wastewater.
These submersibles are
ideal for small-scale
sew age transport or
groundwater drainage
–in locations such as
private dwellings, work
shops or restaurants.
They’re particularly suitable
for sewage sumps
as well as groundwater
pits. Both indoors and
outdoors.
The units couldn’t be
easier to install. Either
as free-standing or permanent
installations.
They’re simply lowered
into place, and set to
work.
Available with channel
or vortex impellers and
housed in cast iron,
these Flygt pumps offer
years of reliable, hardduty
service.

Easy to install,
easy to service
F For semi permanent installations,
the pump
rests free-standing on a
flat and even floor. The
discharge can be connected
to either a pipe or
hose. If connected to a
pipe, the pump is lifted
together with the first
section of the pipe.
S In what we call the ”S”
installation, getting the
pump into place could
not be simpler: mounted
on its own stand and
with a flexible hose attached
to the discharge,
the pump is simply lowered
into place and the
power turned on.
The outlet can also be
connected to a pipe.
For both F and S, a level
regulator controls start
and stop.
H - for semi-permanent
quick connection suspended
coupling arrangement.
Suitable for prefabricated
pump station for
sewage or pressurized
sewage system and for
groundwater.
Down with a clunk,
up with a click
The P installation is recommended
for sewage
pumping. With its guide
bars and automatic
discharge connection,
it is extremely easy to
access the pump. Guided
down into place by the
bars the pump automatically
connects to the
discharge pipe. As the
pump is lifted up, it automatically
disconnects
from the discharge.
A pair of external level
regulators control pump
start and stop.

Built for trouble-free
pumping
A motor made
for submersible pumps
Rather than buying off-the-shelf
motors, we design them our selves –
unique among pump manufacturers.
This ensures years of trouble-free
perfor mance, despite the tough
operating conditions.
The motor is dry rather than oil
filled. This results in higher efficiency
and easier maintenance, while eliminating
the risk of environmental
contamination.
The double mechanical
face seals
Two sets of mechanical shaft seals
provide double security.
Cast iron shell
The motor and pump housings are
made from cast iron. This makes
Flygt pumps sturdier and more
resistant to corrosion than the
pumps made from sheet metal.
The trouble-free
performance
Due to the compact
design of the pump,
the shaft overhang is
kept short: this virtually
eliminates shaft deflection
and vibrations,
lead ing to a minimum
of stress on the seals
and bearings.
Cable entry
Separate sealing and
strain-relief functions
reduce the risk of
leakage and cable
damage from improper
handling.
The oil chamber is filled with an environmental white
oil that is free from aromatic hydrocarbons and is
approved by the FDA for use in the food industry.

Two pumps,
two impeller types
Single-vane impeller (C-pumps)
The single-vane impeller offers both high efficiency
and good solid-passing characteristics which makes
it the optimal choice for most groundwater and
sewage applications.
CP/DP
ISO G2"
Pump A B C Weight
kg
3045 415 420 470 28
3057 425 490 540 34
Disch. conn. 7
3045 3057
Curve Motor data Rated current, A Impeller type
kW 3-phase 1-phase
400 V 240 V
C 250 1.2 2.7 – Single-vane
C 252 0.75 – 4.0 Single-vane
D 230 1.2 2.7 – Vortex
D 234 0.75 – 4.0 Vortex
A
B C
Vortex impeller (D-pumps)
The vortex impeller is ideally suited for media that
contains high concentrations of abrasive particles
or particularly large solids.
CS/DS
ISO G2"
Dimensions in mm Dimensions in mm
A
B
CF/DF
CD/DH
ISO G2"
Pump A B C Weight
kg
3045 295 470 465 28.5
3057 310 540 500 31
Curve Motor data Rated current, A Impeller type
kW 3-phase 1-phase
400 V 240 V
C 250 2.4 5.3 – Single-vane
C 252 1.7*) 3.8 8.7 Single-vane
C 254 1.7*) 3.8 8.7 Single-vane
D 230 2.4 5.3 – Vortex
D 232 1.7 3.8 – Vortex
D 234 1.7*) 3.8 8.7 Vortex
D 238 1.5 – 8.7 Vortex
*) 1.5 kW in 1-phase
A
C

What can ITT Water & Wastewater do for you?
Integrated solutions for fluid handling are offered by ITT Water & Wastewater as a world
leader in transport and treatment of wastewater. We provide a complete range of water,
wastewater and drainage pumps, units for primary and secondary biological treatment,
products for filtration and disinfection, and related services. ITT Water & Wastewater
operates in some 140 countries across the world, with own plants in Europe, China and
North and South America. Headquartered in Sweden, ITT Water & Wastewater has 5,800
employees and turnover exceeding $1.6 billion (2007). The company is wholly owned
by the ITT Corporation of White Plains, New York, supplier of advanced technology
products and services.
www.ittwww.com
Wastewater pumps 3045, 3057.50Hz.04.Eng.01.08 893786 Trosa Tryckeri AB 55535