Mission Statement and Berger Locations: 2 

Snow Retention Systems: 3-13 

Real Tool ® Snow Guards 3 

Berger Clear Snow Guards and Caulks 4 

F-RailTM , E-RailTM & S-RailTM Snow Retention 5 

Snow Meister Snow Guards 6 

Berger Residential Snow Guards 6-8 

Mullane Snow Guards 8-13 

Technical Information 14 

Synthetic Roofing Underlayment: 15 

EuraCraft Gutter SystemTM : 16-21 

Embossed Gutter: 22 

Berger Gutter: 23-25 

K-Style Gutter 23 

K-Style Apron Gutter 24 

Half Round Gutter 25 

Downspouts: 26-28 

Round Downspouts 26 

Square Downspouts 27 

Rain Chains 28 

Elbows: 29-30 

Round Elbows 29 

Square Elbows 30 

Accessories: 31-55 

Offsets 31 

Hangers – K-Style 32-35 

Hangers – Half Round 36-38 

Shanks – K-Style & Half Round 39-40 

End Caps – K-Style & Half Round 41 

Miters – K-Style 42 

Miters – Half Round 43 

End Pieces – K-Style & Half Round 44 

Slip Joints – K-Style & Half Round 44 

Outlets – K-Style & Half Round 45-46 

Conductor Heads 47 

Eave Boxes 48 

Funnels 48 

Featured Product: 

Quality Roof Drainage Products, Edgings & 

Coil in a Variety of Popular Colors 

49-52 

TABLE OF CONTENTS 

Accessories: 53-62 

Cut-Offs & Diverters 53 

Downspout Tubes 53 

Pipe Fasteners – Downspout Hooks, Rack & 

Key, Drives, Universal and Ornamental 

Conductor Bands, Pipe Brackets & Cleats 

54-57 

Miscellaneous – Wire Strainer, Pop Rivets, 

Gutter Wedge, Trim Nails, Gutter Mastic, 

Touch-Up Paint & Pipe Flashing 

58-59 

Gutter Guards, Splash Blocks & 

Flex-A-Spout 

60-62 

Step Flashing: 63 

Roof Edging & Trim: 64-74 

“A” Styles 64 

“B” Styles 64 

“C” Styles 64-66 

“D” Styles 67 

“E” Styles 67-68 

“F” Styles 68-70 

“H” Styles 71 

Vented Drip Edge 71 

Overhanging Drip Edge (ODE and ODLR) 72 

Miscellaneous – Drip Caps, Ridge Roll, 

Deck Ledger, Preformed Valley Flashing, 

Brick Moulding, Corner Flex 

72-74 

® Flashing, 

& Kick-Out Diverters 

Aluminum Soffit & Ventilation Products: 75-78 

Solid & Vented Aluminum & Copper Soffit 75 

Sofitt Accessories – AccuVentTM , Fascia, 

F Channel, J Channels, Starter Strip, 

Soffit Moulding & Soffit Trim 

76-77 

Ventilation – Pro-Master Ridge & Box Vents 78 

Decking Products: 79-88 

ProDeckTM Vinyl Railing Systems 79-84 

ProDeckTM Composite Railing Systems 85-87 

DrySnapTM Under Deck Rain Carrying System 88 

Coil Products: 89-92 

Aluminum & PVC Trim Coil 89 

Aluminum & Copper Gutter Coil 89-90 

Other – Terne Metal, Aluminum / Copper / 

Galvanized Steel Flashing, Copper 

Sheets, Metal Bender Tool & Blades 

90-92 

Technical Reference Appendix: A1-A16 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 1 

7/07

MISSION STATEMENT 

AND BERGER LOCATIONS 

Mission Statement 

To manufacture the highest quality products and maintain maximum customer satisfaction 

through superior service and competitive pricing. Promote a team atmosphere where 

employees will experience challenging and rewarding career opportunities. 

N. NEW JERSEY/NYC: 

41 Colonial Drive 

Piscataway, NJ 08854 

Ph: 732-981-0232 

Fax: 732-981-0382 

NEW ENGLAND: 

101 B H. P. Almgren 

Agawam, MA 01001 

Ph: 413-786-1713 

Fax: 413-786-8964 

SOUTHEAST: 

4455 River Green Parkway 

Duluth, GA 30096 

Ph: 404-732-7625 

Fax: 678-513-0941 

Berger Locations 

CORPORATE HEADQUARTERS: 

805 Pennsylvania Boulevard 

Feasterville, PA 19053 

Ph: 800-523-8852 

Ph: 215-355-1200 

Fax: 215-355-7738 

MIDWEST: 

Windham Industrial Center V 

1160 West Remington Boulevard 

Romeoville, IL 60446 

Ph: 630-679-0508 

Fax: 630-679-0903 

SOUTHWEST: 

1025 Avenue S, Suite 150 

Grand Prairie, TX 75050 

Ph: 972-641-1881 

Fax: 972-641-7333 

WEST: 

3701-A Pell Circle 

Sacramento, CA 95838 

Ph: 916-924-1881 

Fax: 916-924-0562 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 2 

7/07

U. S. Patents 5,282,340 and 351,989 

U. S. Patents 5,522,185 and 372,421 

U. S. Patent 364,338 

SNOW RETENTION SYSTEMS 

RT ® Snow Guard Series - 100 pcs. per ctn. 

Berger RT Snow Guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set 

screws to clamp them in place. They require no glues or sealants, and will not restrict thermal movement or contribute to unsightly oilcanning. 

RT Snow Guards are available in cast aluminum and cast bronze, and in two sizes to accommodate differing seam widths. They 

are particularly suited to double-lock and mechanically seamed metal roofing, and being traditional in design, they are ideal for 

restoration and preservation work. 

RT-200 Designed to accommodate seams of up to 3/16" (0.188" thick) and no higher than 1 inch. Suited for use with light gauge sheet 

metals such as 40lb. terne, 26 gauge galvanized, 16 ounce copper, lead coated copper and TCS. 

RT-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and no higher than 1 inch. Suited to heavier gauge metals 

such as 20 ounce copper, 24 gauge prefinished metal and products of similar thickness. 

• Available in Mill Finished Aluminum (M), E-Coat (E), Custom Color Aluminum (C) and Bronze- for Copper Roofs (B). 

• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return. 

ENTER COLOR/METAL CODE WHEN ORDERING 

Seams up to 3/16” Thick & 1 Inch High Seams up to 9/32” Thick & 1 Inch High 

Code Price Code Price 

RT200__ RT300__ 

AP Snow Guard Series - 50 pcs. per ctn. 

Page 3 

7/07 

Berger AP Snow Guards are non-penetrating devices which have been engineered specifically for use with the more popular structural 

and non-structural preformed and architectural metal roof systems. They are secured without glues or sealants, and utilize custom milled 

stainless steel set screws to clamp them in place. They are produced in cast aluminum, and are available in three different seam widths 

and heights. The attachment of the AP Snow Guard does not restrict thermal movement, and the deep throat permits it to be secured 

directly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularly 

effective in retaining snow with the higher seams and wider panel widths common in preformed architectural roofing. 

AP-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and at least 1-1/4" high, including high double locked 

mechanically closed seams and single locked preformed architectural panels. 

AP-400 Designed to accommodate seams of up to 3/8" (0.400") in thickness and at least 1-1/2" high, including snap-lock interlocking 

panels. 

AP-516 Designed to accommodate seams of just over 1/2" (0.516") in thickness and at least 1-1/2" high. 

• Available in Mill Finished Aluminum (M), E-Coat (E), and Custom Color Aluminum (C). 

• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return. 


Seams up to 9/32” Thick & 1 1/4” High Seams up to 3/8” Thick & 1 1/2” High Seams up to 1/2” Thick & 1 1/2” High 

Code Price Code Price Code Price 

AP300__ AP400__ AP516__ 

SM Snow Guard Series - 50 pcs. per ctn. 

Berger SM Surface Mount Snow Guards are manufactured of cast aluminum and are designed to be adhered to the pan surface of 

prefinished metal roofs using either a high strength construction adhesive or a combination of mechanical fasteners and an adhesive/ 

sealant. They are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam 

mounted device can be fastened, including batten and lap seam panels, and other profiles having a flat surface of as little as 2 3/8" in 

width and space for a 5" blade. The SM Snow Guard is uniquely suited for use on trapezoidal type panels when coupled with the 

matching RT-300 Snow Guard. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger. 

• Available in Mill Finished Aluminum (MF), E-Coat (EA) and Custom Color Aluminum (CA). 

• Custom Color (CA) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return. 


Surface Mount 

Code Price 

SM__ __SG 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

SNOW RETENTION SYSTEMS


RTCLSR 

RTCLSM 

U. S. Patents 6,266,929 and 418,403 

U. S. Patent Pending 


Clear Snow Guard Series - 50 pcs. per ctn. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 4 

7/07 

Berger Clear Snow Guards are manufactured in a crystal clear polycarbonate with U.V. stabilizers. There are two models of the Berger 

Clear Snow Guards: RTCLSR - Structural Ribs and RTCLSM - Surface Mount. The unique vent rib system allows for adhesive out 

gassing, which increases the shear and mechanical strength. The three to one base to blade ratio adds significantly to the shear and peel 

adhesion of the device to the surface. Superior engineering, along with the structured ribs, prevent common blade breakage. Berger Clear 

Snow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3-1/2" 

wide. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger. 

Structural Rib Surface Mount 


RTCLSR RTCLSM 

RTMINI Clear Snow Guards - 100 pcs. per ctn. 

Berger RTMINI Clear Snow Guards are manufactured in a high clarity polycarbonate plastic with U.V. stabilizers which provides strength 

and longevity. They have a low visibility and blend with roof materials. The RTMINI has a 1.5" wide base to fit parapet ribbed roof 

channels. They are manufactured with a 4.5 square inch holding area, a 2:1 base to blade ratio and a gusseted blade snow pocket that 

combine to effectively retain snow. They can be attached with adhesives, screws or VHB Tapes. The RTMINI features a blade "Snowflake" 

slot that accepts a metal color chip or custom emblem. Adhesive failure does not constitute Berger product defect and is not the 

responsibility of Berger. 

SB-190 Surebond Everseal Warm Weather, High Strength Construction 

Adhesive Caulk - 24, 10.3 oz. tubes per case 

A versatile, hard setting, one part adhesive specially designed for a wide variety of industrial sealing. This unique formula possesses 

up to 2000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. This adhesive/sealant requires 28 consecutive 

days (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. Please follow directions for 

best results. Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until initial set of 

adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will adhere 8-10 CL Snow Guards and 14-16 

RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes full 

responsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizing 

the directions of the adhesive manufacturer. In cold weather, Berger recommends mechanical attachment to the roof structural 

member combined with the adhesive sealant for the best result. Adhesive failure does not constitute Berger products defect and is not 

the responsibility of Berger. 

Code Price 

SB-190 

SB-1800 Surebond Everflex Cold Weather, High Strength Construction 

Adhesive Caulk - 24, 10.3 oz. tubes per case 

The Surebond Everflex SB-1800 is a cold weather sealant that can be used in temperatures as low as -20 degrees Fahrenheit and fully 

cures in 24 hours to 500psi shear tensile strength. Under certain conditions, temporary measures may need to be employed to hold 

the snow guard in place until initial set of adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will 

adhere 8-10 CL Snow Guards and 14-16 RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for the 

convenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adhering 

snow guards with successful results utilizing the directions of the adhesive manufacturer. Adhesive failure does not constitute Berger 

products defect and is not the responsibility of Berger. 

Code Price 

SB-1800 

Clear Polycarbonate 

Code Price 

RTMINI


F-Rail TM Snow Retention System 

• Accommodates up to 4 Rails of Protection. 

• The Only Rail Style Snow Fence Available that Functions BELOW the Standing Seams on 

Metal Roofs - Helping to Control the Possibility of Dangerous Ice Slides. 

• Requires NO Penetration of the Roof. 

• Receiver "Pockets" Make it an Easy-To-Install System. 

• Easy to Retrofit Existing Roofs. 

• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof. 

Please call Berger at (800) 523-8852 for specifics as these products are quoted as a “system” only. 

U. S. Patent 6688047 

Mill Finished Aluminum Custom Painted E-Coat Black Primer 


FCSTSF FCSTFP FCSTSFE 

E-Rail TM Snow Retention System 

• Dual Rail, Low Profile Snow Retention System. 

• Stronger and Lighter System that offers between the Seams Protection on Metal Roofs - 

Helping to Control the Possibility of Dangerous Ice Slides. 

• Requires NO Penetration of the Roof and is Easy-To-Install. 

• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof. 

• Receptor Slot for Custom Ornamental Attachment. U. S. Patent 6688047 



ECSTSF ECSTSFP ECSTSFE 

S-Rail TM Snow Retention System 

• Single Rail, Low Profile Snow Retention System. 

• Functions BELOW the Standing Seams on Metal Roofs - Helping to Control the 

Possibility of Dangerous Ice Slides. 

• Requires NO Penetration of the Roof and is Easy-To-Install. 

• Economical Snow Rail that's Easy to Retrofit to Existing Roofs. 

• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof. U. S. Patent 6688047 



SCSTSF SCSTSFP SCSTSFE 

F-Rail TM , E-Rail TM & S-Rail TM Snow Retention System Components 

• TBSS20 Tubing is available in 16 Gauge Stainless Steel and is 20 feet x 1 inch square. Tubing is Sold by the foot. 

• TBCR24P Tubing is available in 16 Gauge CR Steel and is 24 feet x 1 inch square, Painted to Match the Roof. 

• Tube End Caps are available in Black Plastic. 

• Stainless Self Tap Screws #8 x 1/2". 

• Stainless Self Tap Screws are Sold by the Bag - 25 Screws per Bag. 

TUBING END CAPS SCREWS 


TBSS20 TUBCAP STS812 

TBCR24P 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

TM 

TM 

Page 5 

7/07 



U. S. Patent 6,499,259 

U. S. Patent 6,499,259 

U. S. Patent 6,499,259 

U. S. Patent 6,499,259 


SG-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn. 

Page 6 

7/07 

These non-penetrating devices are for traditional double lock standing seam roofs 1.0" deep x .250" wide. They fit both 1" and 1-1/2" high 

seams. The symmetrical design rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom 

Colors. Black E-Coat Epoxy Primer Cast Aluminum requires a final color coat by contractor. Painted Aluminum and Polished Bronze 

require extended lead time and are not subject to cancellation or return. *Polished Bronze is a non-stock, special order. 

Mill Finished Cast Aluminum Painted Cast Aluminum Black E-Coat Primer Cast Alum. Polished Bronze 

Code Price Code Price Code Price Code Price 

SG-1MF SG-1C SG-1EBK SG-1PBZ* 

SG-175 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per 

ctn. These non-penetrating Cast Aluminum devices are for snap lock seam roofs 1.75" deep x .475" wide. The symmetrical design 

rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy Primer 

Cast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject to 

cancellation or return. 

Mill Finished Cast Aluminum Painted Cast Aluminum Black E-Coat Primer Cast Aluminum 


SG-175MF SG-175C SG-175EBK 

SL-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn. 

These non-penetrating Cast Aluminum devices are for single lock T seam roofs 1.0" deep x .575" wide. The symmetrical design 

rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy Primer 

Cast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject to 

cancellation or return. 



SL-1MF SL-1C SL-1EBK 

SG-3 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn. 

These non-penetrating Cast Aluminum devices are forstanding seam roofs 1.0" deep x 3" wide. The symmetrical design rotates 180 

degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy Primer Cast 

Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject to 

cancellation or return. Coming Soon. 



SG-3MF SG-3C SG-3EBK 

Pro 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs - 

50 pcs. per ctn. 

This heavy-duty snow guard is available in copper and stainless steel for corrugated, flat, slate and asphalt shingled roofs. The 

superior design of the Pro 100 includes a 1-inch gusset that reinforces the shoe, which makes this snow guard 5 times stronger than 

traditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied to 

the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed 

slots and pull to fully secure the bar. This style snow guard provides fast installation and is ideal for existing or new construction 

applications with asphalt shingled roofs. 

Copper Stainless Steel 


SGCP100 SGSP100 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738


Modified #100 Snow Guard for Asphalt Shingled Roofs - 50 pcs. per ctn. 

This is a modified Berger #100 Snow Guard. The #100 shoe is attached to a shorter, solid bar/strap, and is designed for easy 

installation on shingle roofs. 



SGC100HP SGS100HP 

No. 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs - 


This guard has eliminated the necessity of removing slate, avoiding the possibility of breakage. Simply insert the slotted bar under the 

slate or shingle, engage a nail with one of the conveniently placed slots and pull down to fully secure bar. This style snow guard 

provides fast installation and is ideal for existing or new construction applications with asphalt shingled roofs. 

Copper Stainless Steel Galvanized Steel 


SGC100 SGS100 SGG100 

No. 100 Snow Guards for Flat Metal Roof Surfaces - 50 pcs. per ctn. 

Affordable protection for your gutter, foundation or shrubbery. Ideal for mounting to corrugated or flat roof panels. Stainless steel offers 

no corrosion problems or stains and is suitable for paint to match your roof. The copper guard can be soldered or fastened to copper 

roof panels. These guards provide 8.75 square inches of stopping area. Holes for #8 screws or rivets. 1" x 2" flat mounting area. Use 

neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190). 



SG-CPS SG-SSS 

No. 1 Snow Guards for Standing Seam - 100 pcs. per ctn. 

The roofer’s choice since 1883 for use on standing seam metal roofs. They are pinched to clamp on the top of the seam providing a 

rigid permanent job. 

Bronze Galvanized Malleable Iron 


SGBR-1 SGML-1 

No. 20 Snow Guards for Metal Corrugated Roof Surfaces - 100 pcs. per ctn. 

Designed to fit 1 1/4" or 2 1/2" rounded corrugation. Use neoprene washer screws to fasten. All roof penetrations should be sealed with 

adhesive sealant (SB-190). It fits on top of the corrugation. 



SGBR20 SGML20 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 7 

7/07 



Soldering 

Nailing 

Retro Hook 

SNOW RETENTION SYSTEM 

No. 2 Snow Guard Assembly for Slate Roofs - 50 pcs. per ctn. 

Mullane BRONZE GUARD Model #100 Series- 50 pcs. per ctn. 

A traditional spike style snow guard, from a design first patented in 1899. The Model #100 is historically accurate for period 

restorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile, 

this model is more appropriate for residential usage. The Model #100 is for applications on slate, shake, and shingle roofs, and is 

designed to fit between adjacent pieces of roof material, so that only the casting is visible above the roof surface. 

#100 Series for Soldering 

Bronze Lead Coated Copper 


100CPSM 100LCPSM 

#100 Series for Nailing on New Installations (Slate or Shingles) 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 8 

7/07 

A durable, plated iron casting and bar assembly designed for slate roofs. The riveted steel bar is 1/8" x 1" x 12" long and goes 8" under 

the slate and between the slate course. It is normally installed with the slate roof application. Also suited for wood shake, tile and 

mineral surfaced shingles. Use neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190). 

No. 95 Snow Guard Assembly for Slate Roofs (Heavy Duty Ornamental) 

A larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate. This assembly is 

available in three material selections with 1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snows! 

Bronze - 30 pcs. per ctn. Aluminum - 50 pcs. per ctn. Galvanized Malleable Iron - 30 pcs. per ctn. 


SGBR95 SGAL95 SGML95 

Loop the Loop Snow Guards for Asphalt Shingle, Slate and Cedar Shake 

Roofs - 300 pcs. per ctn. 

Copper 

Code Price 

SGLLC1 



SGBR-2 SGML-2 

The Loop the Loop snow guard is an economy guard for wood deck applications under slate, wood shakes or asphalt shingles. 

Recommended snow guards per square: 1/4 pitch roof - 50 snow guards, 1/3 pitch roof - 75 snow guards, 1/2 pitch roof - 150 snow 

guards. Loop the Loop snow guard does not follow the typical layout pattern as seen on page 13. This style snow guard requires total 

roof coverage. Please call Berger at (800) 523-8852 for more information. 

Bronze for Slate Applications Lead Coated for Slate Applications Bronze for Asphalt Shingle Applications 


100S-NA 100SLC-NA 100S-AS 

#100 Series with Retro-Hook for Existing Slate Roofs 



100S-RH 100SLC-RH

Soldering 

Nailing 

Retro Hook 

Compressible Hook for Retro Fit 

Tile Roofs 

New Installations Only. 

Hook does not Compress. 

Soldering 

Nailing 

Retro Hook 

Compressible Hook for Retro Fit 


This spike style snow guard is fabricated from the same sheet metal components as the #100, but the #200 casting is 30% larger 

than the #100. Both products are equally strong and effective in their capacity to hold snow on the roof, but the Model #200S is more 

appropriate to larger scale buildings, or where the roof material is thicker than usual, such as tile roofing. 









#200 Series with Hook for New Installations (Tile Roofs) 


Code Price 





200S-RH 200SLC-RH 

200CPT 200LCPT 


A solid bronze pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 24 oz. copper 

installation base flange by four solid copper rivets for extreme durability and snow load bearing capacity. The solid bronze casting 

eliminates the corrosion problem caused by condensation which is formed inside of closed, pressed copper snow guards. The 

installation flange can be easily fabricated to any length for any roof application, and is also available with our Retro-Hook. 






(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 9 

7/07 







300S-RH 300SLC-RH 



Eagle Design 

Oak Leaf Design 

Fleur-de-Lis Design 



(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 10 

7/07 

This "Classic" BRONZE GUARD series features large (approximately 4” x 4”) decorative bronze castings in Eagle, Oak Leaf, or Fleur- 

De-Lis designs. The castings are mounted on solid 1" x 1/8" copper bar stock with solid brass bolts. The installation bar is predrilled 

for easy installation. While they are decorative elements, they are also extremely durable and are capable of holding extreme loads. 

They are typically installed in two rows along the eaves with subsequent rows of low profile guards to supplement the necessary 

snow holding design load. 

#400 Series, Eagle Design 

Bronze Bronze Patina 


400EGLBRZ 400EGLPAT 

#400 Series, Oak Leaf Design 



400LEAFBRZ 400LEAFPAT 

#400 Series, Fleur-de-Lis Design 



400FDLBRZ 400FDLPAT 

Mullane SNOW BOSS Model #630 for Metal Roofs - 50 pcs. per ctn. 

SNOW BOSS #630 are solid cast aluminum snow guards and are best used for curtain wall systems, window wells or cornice shelves. 

Typical installation is by means of high strength adhesives (SB-190) that develop superior peel and shear bonding strength on modern 

metal roofs coated with plastic resin paints such as Kynar ® . These aluminum guards are available mill finished or custom color matched 

using Dupont ® Imron enamels. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger. 

Mill Finished Cast Aluminum Painted Cast Aluminum 


630M 630C 


SNOW BOSS #640 are "traditional shaped", solid cast aluminum snow guards for the mid-panel application on all standing, batten, 

and flat seam (non-copper) metal roofs. Typical installation is by means of high strength adhesives (SB-190) that develop superior 

peel and shear bonding strength on modern metal roofs coated with plastic resin paints such as Kynar ® . These aluminum guards are 

available mill finished or custom color matched using Dupont ® Imron enamels. Adhesive failure does not constitute Berger product 

defect and is not the responsibility of Berger. 



640M 640C



(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 11 

7/07 

SNOW BOSS #650 Series is constructed with durable UV resistant polycarbonate and is compatible with all non-copper metal roof 

systems. The Model #650 includes a new patent pending base design, which is the latest technological advance in adhesive mounted 

(SB-190) snow guard systems. This cross hatch design strengthens adhesive grip by increasing surface area and texture, and 

provides for faster solvent escape, and adhesive curing. The series of evenly spaced holes in the base allow the solvents to dissipate 

quickly, and become “glue rivets” when the adhesive keys in the holes for a more secure application. Adhesive failure does not 

constitute Berger product defect and is not the responsibility of Berger. 

Clear Polycarbonate 

Code Price 

650C 


SNOW BOSS #690 are a decorative, spoked, half-round designed solid cast aluminum snow guards. They are well suited for the midpanel 

application on all standing, batten, and flat seam (non-copper) metal roofs. Typical installation is by means of high strength 

adhesives (SB-190) that develop superior peel and shear bonding strength on modern metal roofs coated with plastic resin paints 

such as Kynar ® . These aluminum guards are available mill finished or custom color matched using Dupont ® Imron enamels. Adhesive 

failure does not constitute Berger product defect and is not the responsibility of Berger. 



690M 690C 

Mullane Model #500 Bronze Guard Snow Fence Bracket (for 3 Pipes) 

The Model #500 Snow Fence Bracket is cast from solid bronze for lifetime durability. The castings have been carefully engineered to 

assure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard, and give 

redundant protection against casting failure when under load. Holes for rails are 1.125” to accommodate 1.05” (od) brass pipe. The 

brackets are available in three angles: 90, 67.5, and 45 degrees. The base plate is 1/8" 220 bronze. The Model #500 is typically 

installed along the perimeter of slate roofs with rafters up to 25 ft. in areas with moderate to high snow falls. The Model #500 is a 

custom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe, Couplings and End Caps sold separately. 

Please call Berger at (800) 523-8852 for more information. 

Bronze Bracket & Plate 

Code Price 

500BBA 

Mullane Fitrite #121 Protector Snow Fence Bracket (for 2 Pipes) 

The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11 gauge 

galvanized steel plate. The brackets accommodate two .080” (od) galvanized pipes. The Fitrite #121 is typically installed on slate roofs 

with rafters not over 18 ft. in areas with moderate snow falls. The Fitrite #121 is a custom order and the base plate can be fabricated 

to any specified size. 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more 

information. 

Galv. Malleable Iron Bracket & Steel Plate 

Code Price 

FR121ML 



(Custom plate not shown) 

(Custom plate not shown) 


Mullane Fitrite #122 Protector Snow Fence Bracket (for 2 Pipes) 

Mullane Fitrite #124 Mini Protector Snow Fence Bracket (for 2 Pipes) 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 12 

7/07 

The Model #122 Snow Fence Bracket is cast in bronze for durability. The castings are mounted on an 11 gauge galvanized steel plate. 

The brackets accommodate two .080” (od) brass pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft. 

in areas with moderate snow falls. The Fitrite #122 is a custom order and the base plate can be fabricated to any specified size. 1/2" 

Red Brass Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information. 

Bronze Bracket & Brass Plate 

Code Price 

FR122BR 

The Fitrite #124 Mini Protector Snow Fence Bracket is cast in malleable iron for durability. The castings are mounted on a solid 

galvanized steel plate, 2" x 12", with pre drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2” 

galvanized pipes. Brackets are adjustable to the roof pitch. The Model #124 should be used only where low to moderate snowloads 

are anticipated and can be mounted to most any roof surface. The Fitrite #124 is availble in cast bronze or galvanized malleable iron. 

1/2" Red Brass Pipe or 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more 

information. 

Cast Bronze Galvanized Malleable Iron 


FR124BR FR124ML 

Mullane Fitrite #131 Snow Fence Bracket (for 3 Pipes) 

The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefully 

engineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3 

galvanized iron, bronze, brass or stainless steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. The 

brackets are adjustable to various roof pitches. The base plate is 11 gauge galvanized steel, sized to the slate dimension, and 

predrilled and countersunk for fasteners. Bolts are Grade 5 zinc plated steel. The Fitrite #131 is a custom order and the base plate can 

be fabricated to any specified size. 3/4" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523- 

8852 for more information. 

Malleable Iron Bracket & Galv. Steel Plate 

Code Price 

FR131ML 

Mullane Fitrite #132 Snow Fence Bracket (for 3 Pipes) 

The Model #132 Snow Fence Bracket is cast from solid bronze for durability. The castings have been carefully engineered to assure 

maximum strength at the points of the greatest stress when under load. The Model #132 accommodates 3 brass, bronze or stainless 

steel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. The 

base plate is 1/8" commercial bronze or brass plate, sized to the slate dimension, and predrilled and countersunk for fasteners. Bolts 

are solid brass. The Fitrite #132 is a custom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe, 

Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information. 

Bronze Bracket & Brass Plate 

Code Price 

FR132BR

Mullane Fitrite Pipe Snow Guards for Tile Roofs 

Fitrite #531 

Fitrite #532 


Available for Spanish, French, Ludowici, Designer, Celadon & Mission Tiles. Please call for details. 

Mullane Fitrite #531 and #532 Snow Fence Bracket with Spanish Tile 

Base (for 2 or 3 Pipes) 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 13 

7/07 

The Model #531 is cast in a solid Aluminum Alloy with a spanish tile base. It is available in 13" and 18" lengths with a Galvanized 

Malleable Iron 2 or 3 pipe bracket and adjustable support. The Model #532 is cast in solid Bronze with a spanish tile base. It is 

available in 13" and 18" lengths with a Bronze 2 or 3 pipe bracket and adjustable support. Both the Model #531 and Model #532 match 

the Ludowici designer tile. 

Aluminum Alloy Bracket Solid Bronze Bracket 


FR531 FR532 

Mullane Fitrite #631 and #632 Snow Fence Bracket with French Tile Base 

(for 2 or 3 Pipes) 

The Model #631 is cast in a solid Aluminum Alloy with a french tile base. It is available with a Galvanized Malleable Iron 2 or 3 pipe 

bracket and adjustable support. The Model #632 is cast in solid Bronze with a french tile base. It is available with a Bronze 2 or 3 pipe 

bracket and adjustable support. Both the Model #631 and Model #632 match the Ludowici designer tile. 



FR631 FR632 

Mullane Fitrite #831 and #832 Snow Fence Bracket with Designer Tile 


The Model #831 is cast in a solid Aluminum Alloy with a designer tile base. It is available with a Galvanized Malleable Iron 2 or 3 pipe 

bracket and adjustable support. The Model #832 is cast in solid Bronze with a designer tile base. It is available with a Bronze 2 or 3 

pipe bracket and adjustable support. Both the Model #831 and Model #832 match the Celadon designer tile. 



FR831 FR832 

Mullane Fitrite #931 and #932 Snow Fence Bracket with Mission Tile 


The Model #931 is cast in a solid Aluminum Alloy with a mission tile base. It is available with a Galvanized Malleable Iron 2 or 3 pipe 

bracket and adjustable support. The Model #932 is cast in solid Bronze with a mission tile base. It is available with a Bronze 2 or 3 

pipe bracket and adjustable support. Both the Model #931 and Model #932 match mission tile roofing. 



FR931 FR932 

All Fitrite Pipe Snow Guards forTile Roofs are a custom order. Please call Berger at (800) 523-8852 for more information. 



Snow Guard Guidelines 

2nd group same as 1st 

group with spacing pattern 

reversed as shown 

3rd row is same as 1st row. 

Up 15 in. or 

2 rows of shingles 

2nd row stagger 15 in. 

over central to 1st row, 

and 15 in. up roof or 2 rows 

of shingles above 1st row 

SNOW GUARD 

TECHNICAL INFORMATION 

Snow Guard Pattern Requirements Typical For Shingled Roofing 

Berger will provide a custom snow guard pattern recommendation. Please contact us at 800-523-8852 for your custom layout. 

Snow guard patterns provided by Berger are only recommendations. Actual snow guard patterns should be approved by a licensed architect. 

RIDGE (Top of Roof) 

6 to 8 ft. 

between groups 

X X X X X X X X X X X X X X 

X X X X X X X X X X X X X X X 


6 to 8 ft. 

between groups 




EAVE (Bottom of Roof) 

Start 1st row at or 

above exterior 

load bearing wall 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 14 

7/07 

DETERMINING THE PROPER AMOUNT OF TORQUE FOR SET SCREWS will vary depending on the type and gauge of metal roofing. The recommended 

method for determining proper torque is to install one unit first, with blade on the uphill side. After tightening the set screws, loosen and remove the unit, 

inspecting the indentations created in the seam to see that proper compression was obtained. Remember, the screw closest to the blade is the real workhorse as 

it derives its strength from the blade, and if extra torque is needed, apply it to this screw. 

WHEN MECHANICALLY FASTENING SNOW GUARDS, use sealant or neoprene washers to ensure watertight seals. It is imperative to secure these products 

to a structural membrane rafter or purlin at least 1.5 inches deep. 

Berger Building Products, Inc (BBPI) snow guards are devices that are attached to the roof structure in order to provide uniform retention and control the 

snow from avalanching in large sheets. The snow guards need to be applied in sufficient quantity according to a prescribed pattern in order to be effective. Snow 

Guards are intended to reduce snow movement and provide for a controlled melt and breakdown of the snow mass into smaller sections. Snow guard placement 

will vary from region to region and will be influenced by roof pitch, the lengths of roof runs and roof features. Local installation customs may not be the best 

guide for placement. Additional information can be found in Sheet Metal and Air Conditioning Contractors' National Association (SMACNA) architectural sheet 

metal manual. Ultimately a qualified professional should determine placement. 

2nd group should be 

approx. 6 to 8ft. 

from 1st group; additional 

groups may be needed 

depending on overall 

length of run. 

Positioning of Berger snow guards required for effective use: 1 every 40 inches over entire roof, or 2 groups of 3 staggered rows on 30 inch centers with 1 

group at the eave and 1 group midway on roof slope. On long slopes, multiple groups with 6 ft. space separation maximum. Snow guards should never be 

placed beyond the bearing wall on an extended roof section. This can result in ice damming and cause structural damage. 

Berger Building Products, Inc (BBPI) warrants that the products it manufactures shall be free from material defects. Should any of the products prove 

defective, the obligation of BBPI under this warranty shall be limited to replacement of the defective product or at our option the cost of the product originally 

shipped by Berger. This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for a 

particular purpose. There are no warranties, which extend beyond the description on the face hereof. BBPI in no event, whether claim is based on warranties, 

contract negligence or otherwise, is liable for incidental or consequential damages. 

Berger Building Products, Inc (BBPI) will not be responsible for misapplication or modification of product, incorrect material or defects that were obvious at 

time of installation. Any consequential damage, schedule delays, additional labor, and or equipment rental costs will not be BBPI responsibility. Any BBPI product 

warranty claim is limited solely to Berger Building Products, Inc.

FBC: #FL4855 

FBC: #FL4855 

SYNTHETIC 

ROOFING UNDERLAYMENT 

Pro-Master Roof Shield UDL - Synthetic Roofing Underlayment 

• UV Stabilized Synthetic Material Rated for One Year Exposure. 

• Lightweight: 28 lbs. for 10 Sq. Roll. 

• Printed with Nail Pattern and Alignment Guides. 

• Anti-Slip Coated for Safety. 

• 52" Width Makes Installation Quicker. 

• Resists Mold. 

• Stronger & Lighter than Organic Underlayment. 

• 25 Year Limited Warranty. 

• May be Used with: Asphalt Shingles, Wood Shakes, Non-Structural Metal Roofing, and Synthetic & Quarry Slate. 

• Florida Building Code Approved for Use in HVHZ (High Velocity Hurricane Zone) as per TAS 104. 

Woven Black Polypropylene with Polymer 

Roll Size Size Pallet Size Code Price 

10 Square Roll 52" x 231' 49 Rolls PMUDL10 

Pro-Master Roof Shield UDL PLUS - Synthetic Roofing Underlayment 

• UV Stabilized Synthetic Material Rated for One Year Exposure. 

• Lightweight: 30.3 lbs. for 10 Sq. Roll. 

• Printed with Nail Pattern and Alignment Guides. 

• Traction Twist Fiber for Safety - 30% Better Traction. 

• 52" Width Makes Installation Quicker. 

• Resists Mold. 

• Stronger & Lighter than Organic Underlayment. 


• May be Used with: Asphalt Shingles, Wood Shakes, Non-Structural Metal Roofing, and Synthetic & Quarry Slate. 

• Florida Building Code Approved for Use in HVHZ (High Velocity Hurricane Zone) as per TAS 104. 

Woven Black Polypropylene with Polymer 

Roll Size Size Pallet Size Code Price 

10 Square Roll 52" x 231' 36 Rolls PMUDL10P 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 15 

7/07 

SYNTHETIC ROOFING UNDERLAYMENT

GUTTER 

Half Round Gutter - 5 pcs per ctn. 

EURACRAFT 

GUTTER SYSTEM 

9.84' Long 18.04' Long 18.04' Long 

20 Oz. Copper 18 Oz. Copper 20 Oz. Copper 

Size Code Price Size Code Price Size Code Price 

5" L10E2C5 5" L18EC5 5" L18E2C5 

7.56" L10E2C75 6" L18EC6 6" L18E2C6 

7.56" L188EC75 7.56" L18E2C75 

Smooth Round Welded Downspout - 5 pcs per ctn. 

9.84' Long 9.84' Long 

18 Oz. Copper 20 Oz. Copper 

Size Code Price Size Code Price 

3" PRPEC3 4" PRPE2C4 

4" PRPEC4 

4.7" PRPE8C47 

Smooth Elbow 

• Elbow Angles Available in 40 Degrees (1) and 72 Degrees (3). 

ENTER ANGLE CODE WHEN ORDERING 

18 Oz. Copper 

Size Pcs. per ctn. Code Price 

3" 25 PR__EC3 

4" 25 PR__EC4 

4.7" 15 PR__EC47 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 16 

7/07

Fascia Hanger with Spring Tab 

End Cap 

LEFT 

RIGHT 

Quarter Ball End Cap 

EURACRAFT 

GUTTER SYSTEM 

Size 

18 Oz. Copper 

Pieces per Carton Code Price 

5" 50 GFBHGREC5 

6" 50 GFBHGREC6 

7.56" 10 GFBHGREC75 

J Roof Hanger with Spring Tab 

Size 

18 Oz. Copper 


5" 10 GRFHGREC5 

6" 10 GRFHGREC6 

7.56" 10 GRFHGREC75 

Size 

18 Oz. Copper 


5" 50 CENLHEC5 

6" 50 CENLHEC6 

7.56" 25 CENLHEC75 

5" 50 CENRHEC5 

6" 50 CENRHEC6 

7.56" 25 CENRHEC75 

18 Oz. Copper 

Size Pieces per Carton Code Price 

5" 50 CENBALL5 

6" 50 CENBALL6 

7.56" 25 CENBALL75 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 17 

7/07 

GUTTER

GUTTER 

End Cap with 2' Gutter 

EURACRAFT 

GUTTER SYSTEM 

18 Oz. Copper 


QUARTER BALL END CAP 

5" - left ball 1 EP5BLHEC 

6" - left ball 1 EP6BLHEC 

7.56"- left ball 1 EP756BLHEC 

5" - right ball 1 EP5BRHEC 

6" - right ball 1 EP6BRHEC 

7.56"- right ball 1 EP756BRHEC 

STANDARD END CAP 

5" - left 1 EP5LHEC 

6" - left 1 EP6LHEC 

7.56"- left 1 EP756LHEC 

5" - right 1 EP5RHEC 

6" - right 1 EP6RHEC 

7.56"- right 1 EP756RHEC 

Miters - Seamless 

OUTSIDE 

INSIDE 

Size 

18 Oz. Copper 


5" 5 LOSSMEC5 

6" 5 LOSSMEC6 

7.56" 5 LOSSMEC75 

5" 5 LISSMEC5 

6" 5 LISSMEC6 

7.56" 5 LISSMEC75 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 18 

7/07

Plug In Outlet (no solder required) 

Downspout Reducer 

Swan Neck Offset 

18 Oz. Copper 


3" 25 PROF23EC3 

4" 25 PROF23EC4 

4.7" 10 PROF23EC47 

EURACRAFT 

GUTTER SYSTEM 

18 Oz. Copper 


5" x 3" 25 PINOUT53 

6" x 4" 25 PINOUT64 

7.56" x 4" 25 PINOUT754 

7.56" x 4.7" 25 PINOUT7547 

Gutter Outlet (solder type) 

Metal: Size Pieces per Carton Code Price 

16 Oz. Copper 3" 50 RBOCP3 

16 Oz. Copper 4" 50 RBOCP4 

18 Oz. Copper 4.7" 50 RBOEC47 

Downspout Connector 

Size 

18 Oz. Copper 


3" 50 DSCONNEC3 

4" 50 DSCONNEC4 

4.7" 50 DSCONNEC47 

18 Oz. Copper 


100mm to 76mm Dia. 1 REDUC10076 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 19 

7/07 

GUTTER

GUTTER 

Rainwater Pipe Cleanout 

EURACRAFT 

GUTTER SYSTEM 

18 Oz. Copper 


3" 20 CLNOUT3 

4" 12 CLNOUT4 

Pipe Clamp Cover 

Size 

18 Oz. Copper 


76mm 10 CLPCVR76 

100mm 10 CLPCVR100 

Downspout Bracket with Brass Spike 

Size 

18 Oz. Copper 


3" 25 DSHNGBSPK3 

4" 25 DSHNGBSPK4 

Downspout Bracket with M10 x 3.54" Long Screw THD 

Size 

18 Oz. Copper 


3" 50 DSHNGBSCR3 

4" 50 DSHNGBSCR4 

4.7" 50 DSHNGBSCR47 

Premium Gutter Connector with Rubber Seals 

Size 

18 Oz. Copper 


5" 10 GSPRCONEC5 

6" 10 GSPRCONEC6 

Standard Gutter Connector with Rubber Seals 

Size 

18 Oz. Copper 


5" 10 GUCONEC5 

6" 10 GUCONEC6 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 20 

7/07

Downspout Strainer 

EURACRAFT 

GUTTER SYSTEM 

18 Oz. Copper 


3" 10 DSSTRNEC3 

4" 10 DSSTRNEC4 

4.7" 10 DSSTRNEC47 

Hanger Bending Tool 


Downpipe Expander 

1 HGRBEND 


3" 1 EXPANTOOL3 

4" 1 EXPANTOOL4 

4.7" 1 EXPANTOOL47 

Leaf Guard with Fixing Bracket 

Size 

18 Oz. Copper 


5" and 6" 5 LEAFGDEC5-6 

7.56" 5 LEAFGDEC756 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 21 

7/07 

GUTTER

GUTTER 

“K” STYLE EMBOSSED GUTTER & GUTTER COIL 

ENTER STYLE CODE WHEN ORDERING: 

Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT) 

EMBOSSED GUTTER & COIL 

Caesar Circles Greek Key Patriot 

Metal: 16 OZ. COPPER 

PRODUCT SIZE LENGTH Code Price 

K Style Gutter 5" 10' K10__ __5 




Gutter Coil for 5"K 11 3/4" 200' per roll 1134__ __ 

Gutter Coil for 6"K 15" 200' per roll 15-C__ __ 

HALF ROUND EMBOSSED GUTTER & GUTTER COIL 

Caesar Circles Greek Key Patriot 

ENTER STYLE CODE WHEN ORDERING: 

Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT) 

Metal: 16 OZ. COPPER 

PRODUCT SIZE LENGTH Code Price 

Half Round Gutter 5"SB 10' L10__ __5 




Gutter Coil for 5"HR 10" 200' per roll 10-C__ __ 

Gutter Coil for 6"HR 11 5/8" 200' per roll 1158__ __ 

U. S. Patent 6,314,685 and Patent Pending 

Please Call for Lead Times and Delivery on All Embossed Gutter. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 22 

7/07

• AVAILABLE LENGTHS 

“K” STYLE GUTTER 

LOC. 

SIZE 

Dimensions for Standard Gutter Sizes 

A B C D E F G 

4K 3 1/8" 2 3/4" 2 7/8" 9/16" 4" 7/16" 1/2" 

5K 3 5/8" 3 3/8" 3 5/8" 9/16" 5" 9/16" 1/2" 

6K 4 7/8" 3 7/8" 4 5/8" 1" 6" 5/8" 9/16" 

7K 5 7/8" 4 9/16" 6" 1" 7" 5/8" 5/8" 

8K 7 1/4" 5 3/8" 7" 1" 8" 5/8" 5/8" 

Aluminum K Style Gutter is Hemback Style 

Copper, Galvanized and Painted Steel are Straight Back Style 

All K Style Gutter is Roll-Formed 

SIZE LENGTH ALUMINUM COPPER GALV. STEEL P-STEEL P-GRIP 

Painted Painted Painted 

Aluminum Aluminum Mill Gal. Steel Paintgrip 

0.027 0.032 Finished 16 ounce 20 ounce 24 gauge 26 gauge 26 gauge 26 gauge 

4"K 10' N/A N/A N/A • N/A N/A • N/A N/A 

20' N/A N/A N/A • • N/A • N/A N/A 

5"K 10' • • • .024 • • • • • • 

16' • • • .024 • • • • • • 

20' • • • .024 • • • • • • 

21' • • • .024 • • • • • • 

26' • • • .024 • • • • • • 

30' • • • .024 • • • • • • 

32' • • • .024 • • • • • • 

6"K 10' N/A • • .032 • • • • • • 

16' N/A • • .032 • • • • • • 

20' N/A • • .032 • • • • • • 

21' N/A • • .032 • • • • • • 

30' N/A • • .032 • • • • • • 

32' N/A • • .032 • • • • • • 

7"K 10' N/A • N/A • N/A N/A • N/A • 

8"K 10' N/A • N/A N/A • • N/A N/A N/A 

.027 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Satin White Royal Brown Black Clay (.024 Only) 

.032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown Dark Bronze (6K Only) 

26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: White Brown 

7"K and 8"K are Available in Longer Lengths with Extended Lead Times. 

PACKAGING: 

ALUMINUM: 10' to 21' = 10 pcs. per ctn. 22'+ and 6"K = 5 pcs. per ctn. 

COPPER: 5"K: 10' to 21' = 5 pcs. per ctn. 5"K: 22'+ = 4 pcs. per ctn. 6"K: 10' to 17' = 5 pcs. per ctn. 6"K: 18'+ = 4 pcs. per ctn. 

Standard Product May Vary from SMACNA Guidelines. Use Berger Hangers to Avoid Possible Oil Canning on Face of Gutter. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 23 

7/07 

GUTTER

GUTTER 

“K” STYLE 90 DEGREE APRON GUTTER 

.032 PAINTED ALUMINUM COLORS AVAILABLE: 

High Gloss White Royal Brown Dark Bronze 

“K” STYLE HI-BACK GUTTER 


“K” STYLE APRON GUTTER 

LOC. 

SIZE 

SIZE LENGTH ALUMINUM COPPER GALV. 

Painted Mill 

Aluminum Finished 

0.032 0.032 16 ounce 26 gauge 

5" K 10' • • • • 

5" K 20' • • • • 

6" K 10' • • • • 

6" K 20' • • • • 

Dimensions for Hi-Back Gutter Sizes 

A B C D E F G H 

5K 3 5/8" 3 3/8" 3 5/8" 9/16" 5" 9/16" 1/2" 3" 

6K 4 7/8" 3 7/8" 4 5/8" 1" 6" 5/8" 9/16" 2 9/16" 

SIZE LENGTH ALUMINUM 

Painted 

COPPER GALV. P-STEEL 

Aluminum Mill 

0.032 Finished 16 ounce 26 gauge 26 gauge 

5" K 10' • • • • • 

6" K 10' • • • • • 

5" K 20' • • • • • 

6" K 20' • • • • • 

5" K 30' • • • • • 

6" K 30' • • • • • 

.032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown 

Dark Bronze 

26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: White Brown 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 24 

7/07


HALF ROUND GUTTER 

SIZE LENGTH ALUMINUM COPPER GALV. STEEL P-GRIP 

4"SB 10' N/A N/A N/A • • • • • 

20' N/A N/A N/A • • • • • 

5"SB 10' • • • .024 • • • • • 

20' • • • .024 • • • • • 

25' • • • .024 • • • • • 

30' • • • .024 • • • • • 

6"SB 10' N/A • • .032 • • • • • 

20' N/A • • .032 • • • • • 

25' N/A • • .032 • • • • • 

30' N/A • • .032 • • • • • 

7"SB 10' N/A • • • • • • • 

8"SB 10' N/A • • • • • • • 

.027 and .032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown 

20 Oz. Copper 7"SB and 8"SB are Available with Extended Lead Times. Manufactured Without Break Lines. 

Dimensions for Standard Gutter Sizes 

LOC. 

SIZE 

A B C Girth 

4SB 2" 1/2" 4" 8 1/2" 

5SB 2 1/2" 1/2" 5" 10" 

6SB 3" 9/16" 6" 11 1/2" 

7SB 3 1/2" 5/8" 7" 13 1/8" 

8SB 4" 5/8" 8" 15" 

Painted Painted 

Aluminum Aluminum Mill Paintgrip 

0.027 0.032 Finished 16 ounce 20 ounce 24 gauge 26 gauge 26 gauge 

DOUBLE BEAD HALF ROUND GUTTER & 

SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE 

DOUBLE BEAD 

This Gutter Requires Berger 

Regal Double Bead Bar Hanger 

Listed on Page 35. 

SINGLE BEAD 

WITH 1" FLANGE 

This Gutter Requires Berger 

Regal Single Bead Flange 

Gutter Roof Strap Hanger 

Listed on Page 36. 

SIZE LENGTH 

5" DB 10' • • • 

6" DB 10' • • • 

5" DB 20' • • • 

6" DB 20' • • • 

5" SB w/1" FL 10' • • • 

6" SB w/1" FL 10' • • • 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 25 

7/07 

Copper Galv. Steel Paintgrip 

16 ounce 26 gauge 26 gauge 

PACKAGING FOR DOUBLE BEAD HALF ROUND GUTTER: ALUMINUM: 10' to 26' = 10 pcs. per ctn. 27'+ = 5 pcs. per ctn. 

COPPER: 5"HR: 10' to 25' = 5 pcs. per ctn. 5"HR: 26'+ = 4 pcs. per ctn. 6"HR: 10' to 21' = 5 pcs. per ctn. 6"HR: 22'+ = 4 pcs. per ctn. 

PACKAGING FOR SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE: COPPER: 5 pcs. per ctn. 

GUTTER

DOWNSPOUTS 

ROUND DOWNSPOUTS 

Plain Round Downspout - 

3" & 4" Alum. - 100'/ctn. 3", 4" & 5" Copper - 50'/ctn. Galv. Steel - No Box 

5" & 6" MF Alum. - 50'/ctn. 6" Copper - 30'/ctn. 

ALUMINUM: 

• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss 

White (HG), Royal Brown (BR) and Dark Bronze (DB). 

• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only. 

COPPER: 

• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce. 

GALVANIZED STEEL: 

• 2" Galvanized Steel is Available in 26 Gauge Only. 

• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG). 

• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26). 

PAINTGRIP: 

• 3", 4", 5" & 6" Paintgrip is Available in 26 Gauge Only. 

ENTER COLOR/GAUGE CODE WHEN ORDERING 

Metal: Painted Aluminum Mill Finished Alum. 16 Oz. Copper Galvanized Steel Paintgrip 

Size Code Price Code Price Code Price Code Price Code Price 

2" N/A N/A PRPCP2 PRP262 N/A 

3" PRP__ __3 PRPMF3 PRPCP3 PRP__ __3 PRPPG3 

4" PRP__ __4 PRPMF4 PRPCP4 PRP__ __4 PRPPG4 

5" N/A PRPMF5 PRPCP5 PRP__ __5 PRPPG5 

6" N/A PRPMF6 PRPCP6 PRP__ __6 PRPPG6 

Round Corrugated Downspout - 

3" & 4" Alum. - 100'/ctn. 3", 4" & 5" Copper - 50'/ctn. Galv. Steel - No Box 

5" & 6" MF Alum. - 50'/ctn. 6" Copper - 30'/ctn. 

ALUMINUM: 

• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss 

White (HG), Royal Brown (BR) and Dark Bronze (DB). 

• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only. 

COPPER: 

• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce. 

GALVANIZED STEEL: 

• 2" Galvanized Steel is Available in 26 Gauge Only. 

• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG). 

• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26). 

PAINTGRIP: 

• 3", 4" & 5" Paintgrip is Available in 26 Gauge Only. 


Metal: Painted Aluminum Mill Finished Alum. 16 Oz. Copper Galvanized Steel Paintgrip 


2" N/A N/A N/A RCP262 N/A 

3" RCP__ __3 RCPMF3 RCPCP3 RCP__ __3 RCPPG3 

4" RCP__ __4 RCPMF4 RCPCP4 RCP__ __4 RCPPG4 

5" N/A RCPMF5 RCPCP5 RCP__ __5 RCPPG5 

6" N/A RCPMF6 RCPCP6 RCP__ __6 N/A 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 26 

7/07

Plain Square Downspout - 50'/ctn. 

SQUARE DOWNSPOUTS 

• Painted Aluminum is Available in High Gloss White (W), Royal Brown (B) and Dark Bronze (Z). 

• Painted Galvanized Steel is Available in White (WS) and Brown (BS). 

ENTER COLOR CODE WHEN ORDERING 

Metal: .032 Painted Alum. .032 Mill Fin. Alum. 16 Oz. Copper 26 Ga. Galv. Steel Paintgrip Painted Galv. Steel 

Size Code Price Code Price Code Price Code Price Code Price Code Price 

2" x 3" N/A N/A PSCP23 N/A N/A N/A 

3" x 4" PS3__34 PS3MF3 PSCP34 PSGL34 PSPG34 PS__ __34 

4" x 5" PS3__45 PS3MF4 PSCP45 PSGL45 PSPG45 PS__ __45 

5" x 6" PS3__56 PS3MF5 PSCP56 PSGL56 PSPS56 PS__ __56 

Square Corrugated Downspout - 

Alum. & MF Alum. - 100'/ctn. Copper - 50'/ctn. Galv. Steel - No Box 

Painted Galv. Steel - 50'/ctn. 

• Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Clay (CL). 

• Painted Aluminum 2" x 3" is Also Available in Satin White (SW), Black (BK) and Ivory (IA). 

• 2" x 2" Galvanized Steel is Available in 26 Gauge Only. 

• 2" x 3", 3" x 4" and 4" x 5" Galvanized Steel are Available in 24 Gauge (24), 26 Gauge (26) and 28 Gauge (28). 


• 2" x 3" Painted Aluminum is .019 Standard, .016 Economy (White Only) and .024 Commercial (White Only). 

• 3" x 4" Painted Aluminum is Available in .019 and .024. 

• 4" x 5" Painted Aluminum is .024 Standard. 

• 2" x 3" Mill Finished Aluminum is .019 Standard. 

• 3" x 4" and 4" x 5" Mill Finished Aluminum is .024 Standard. 

• Stainless Steel and 20 Oz. Copper are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks. 

Special Orders are Not Subject to Cancellation or Return. 

• 2" x 3" and 3" x 4" Square Corrugated Downspout is Now Available in Custom Lengths Please Call for Lead Times and Any 

Minimum Order Requirements that may Apply. 

• Requesting Longer Lengths of Downspouts may Increase the Possibility for Pipe to Exceed the Normal Material Tolerances and 

may Lead to Potential Mounting Problems. 


Metal: Painted Aluminum .032 Mill Fin. Alum. 16 Oz. Copper 26 Ga. Galv. Steel Paintgrip Painted Galv. Steel 

Size Code Price Code Price Code Price Code Price Code Price Code Price 

2" x 2" N/A N/A SCPCP2 SCP262 N/A N/A 

2" x 3" Call for Code SCPMF3 SCPCP3 SCP__ __3 SCPPG3 SCP__ __3 

3" x 4" Call for Code SCPMF4 SCPCP4 SCP__ __4 SCPPG4 SCP__ __4 

4" x 5" SCP__ __5 SCPMF5 SCPCP5 SCP__ __5 SCPPG5 SCP__ __5 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 27 

7/07 

DOWNSPOUTS

DOWNSPOUTS 

RAIN CHAINS 

"Tulip" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

235305 

"SunDrop" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

255032 

"Funnel" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

255020 

"Link Ring" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

235805 

"Lily" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

265005 

"Bell Cup" Rain Chain - 1 pc. per ctn., 10' Length 

Copper 

Code Price 

255052 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 28 

7/07

Plain Round and Round Corrugated Elbows - 

3" & 4" Alum. - 30 pcs./ctn. 3" & 4" Galv. - 20 pcs./ctn. 

5" & 6" Alum. & Galv. - 10 pcs./ctn. Copper Elbows - 10 pcs./ctn. All 2" - 20 pcs./ctn. 

• Elbow Angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0). 

• Elbow Angles Specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead 

Time. Special Orders are Not Subject to Cancellation or Return. 

• 3" & 4" Aluminum Elbows are Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF). 

• 5" & 6" Aluminum Elbows are Available in Mill Finished Only. 

• 3" Aluminum Elbows are .019 Standard Gauge. 

• 4" & 5" Aluminum Elbows are .024 Standard Gauge. 

• All Lap Joined Elbows Must be Soldered or Sealed Prior to Installation. 

ENTER COLOR/METAL/ANGLE CODE WHEN ORDERING 

ROUND ELBOWS 

Metal: Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel Paintgrip 

Size Code Price Code Price Code Price 

PLAIN ROUND 

2" N/A PR3CP2 PR63P2 N/A 

3" PR3 __ __3 PR3CP3 PR63P3 PR63G3 

4" PR3 __ __4 PR3CP4 PR63P4 PR63G4 

5" PR3MF5 PR3CP5 PR63P5 PR63G5 

6" PR3MF6 PR3CP6 PR63P6 N/A 

ROUND CORRUGATED 

2" N/A RC3CP2 RC63P2 N/A 

3" RC3 __ __3 RC3CP3 RC63P3 RC63G3 

4" RC3 __ __4 RC3CP4 RC63P4 RC63G4 

5" RC3MF5 RC3CP5 RC63P5 RC63G5 

6" RC3MF6 RC3CP6 RC63P6 N/A 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 29 

7/07 

GUTTER ACCESSORIES

GUTTER ACCESSORIES 

Style A 

Style A 

Style B 

Style B 

Plain Square Elbows 

• All Plain Square Elbows are Special Items and may Require Additional Lead Time. 

• All Plain Square Elbows are Bent at a 75 Degree Angle. Plain Square Elbows are NOT Crimped. They must be Hand Crimped in the Field. 

• Aluminum Elbows are Available in High Gloss White (W), Royal Brown (B) and Mill Finished (M). 

• Stainless Steel is a Special Order and may Require Extended Lead Time of at Least 2 Weeks. 

• Special Order Elbows are Not Subject to Cancellation or Return. 

ENTER COLOR/ANGLE CODE WHEN ORDERING 

METAL: .032 Aluminum 16 Oz. Copper 26 Ga. Galv. Steel 

Size: Code Price Code Price Code Price 

2" x 3" - A Style N/A PSAC23 N/A 

2" x 3" - B Style N/A PSBC23 N/A 

3" x 4" - A Style PSA__34 PSAC34 PSA634 

3" x 4" - B Style PSB__34 PSBC34 PSB634 





Square Corrugated Elbows - 30 pcs./ctn. Copper Elbows - 10 pcs./ctn. All 2" - 20 pcs./ctn. 

• Elbow angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0). 

• Elbow angles specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead 

Time. 

• Aluminum Elbows are Available in Mill Finished and also in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB), 

Clay (CL) - 2" x 3" Only and Satin White (SW) - 2" x 3" Only. 

• 2" x 3" Aluminum Elbows are .016 Standard Gauge. 

• 3" x 4" Aluminum Elbows are .019 Standard Gauge. 

• Painted Galvanized Steel Elbows are Available in White (WS) and Brown (BS). 

• Special Order Elbows are Not Subject to Cancellation or Return. 

ENTER COLOR/ANGLE CODE WHEN ORDERING 

SQUARE ELBOWS 

METAL: Aluminum Mill Finished Alum. 16 Oz. Copper 26 Ga. Galv. Steel 26 Ga. Paint Galv. Steel Paintgrip 

Size: Code Price Code Price Code Price Code Price Code Price Code Price 

2" x 2" N/A N/A SA3CP2 SA63P2 N/A N/A 

2" x 3" - A Style SA__ __ 33 SA3MF3 SA3CP3 SA63P3 SA3 __ __3 SA63G3 

2" x 3" - B Style SB__ __ 33 SB3MF3 SB3CP3 SB63P3 SB3 __ __3 N/A 





(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 30 

7/07

"H" 

"D" 

"O" 

"X" 

"W" 

"X" 

ROUND & SQUARE OFFSETS 

Plain Round Offsets - 10 pcs. per ctn 

• .019 Aluminum Offsets are Available in White (WA) Only. 

• Copper (CP) is Available in 16 Oz. Only. 

• Galvanized Steel (GS) is Available in 26 Gauge Only. 


Pipe Size Offset "O" Diameter "D" "X" Height "H" Code Price 

3" PR 1.5" 3" 2.5" 9.2" OFPR3__ __15 

3" PR 3" 3" 2.5" 12.0" OFPR3__ __3 

3" PR 4" 3" 2.5" 13.5" OFPR3__ __4 

3" PR 5" 3" 2.5" 14.5" OFPR3__ __5 

4" PR 1.5" 4" 3" 11.4" OFPR4__ __15 

4" PR 3" 4" 3" 14.1" OFPR4__ __3 

4" PR 4" 4" 3" 15.9" OFPR4__ __4 

4" PR 5" 4" 3" 17.7" OFPR4__ __5 

"H" 

"L" 

"O" 

Square Corrugated Offsets - 10 pcs. per ctn 

• .019 Aluminum Offsets are Available in White (WA) Only. 

• Copper (CP) is Available in 16 Oz. Only. 

• Galvanized Steel (GS) is Available in 26 Gauge Only. 


Pipe Size Offset "O" Length "L" Width "W" "X" Height "H" Code Price 

2" x 3" Sq. Corr. 1.5" 3" 2" 2.5" 9.2" OFSC3__ __15 

2" x 3" Sq. Corr. 3" 3" 2" 2.5" 12.0" OFSC3__ __3 

2" x 3" Sq. Corr. 4" 3" 2" 2.5" 13.5" OFSC3__ __4 

2" x 3" Sq. Corr. 5" 3" 2" 2.5" 14.5" OFSC3__ __5 

3" x 4" Sq. Corr. 1.5" 4" 3" 3" 11.4" OFSC4__ __15 

3" x 4" Sq. Corr. 3" 4" 3" 3" 14.1" OFSC4__ __3 

3" x 4" Sq. Corr. 4" 4" 3" 3" 15.9" OFSC4__ __4 

3" x 4" Sq. Corr. 5" 4" 3" 3" 17.7" OFSC4__ __5 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 31 

7/07 

GUTTER ACCESSORIES


40K Fascia Hanger with Snap Strap - 50 pcs. per ctn. 

• 5" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA) and Mill Finished (KMF). 

• 6" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA), Dark Bronze (KDB) and Mill Finished (KMF). 

• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS). 


41K Rafter Hanger with Snap Strap - 50 pcs. per ctn. 

• 5" & 6" Painted Aluminum Available in High Gloss White (KWA) and Royal Brown (BRA). 


Metal: Painted Aluminum Copper 

Size Code Price Code Price 

5" 41__ __ __5 41KCP5 

6" 41__ __ __6 41KCP6 

“K” Snap Strap Only for #40 & #41 Hangers - 50 pcs. per ctn. 

• Aluminum Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF). 

ENTER COLOR CODE WHEN ORDERING. 

Metal: Aluminum Copper 


One Size SNS__ __ __ SNS-CP 

Premium K-Style Fascia Hanger with Crossbar - 50 pcs. per ctn. 

• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR). 

• 6" Painted Aluminum Available in High Gloss White Only. 

• Recommended Hanger for Extreme Snow Areas. 




5" 5PF__ __C 5PFCCP 

6" 6PFHGC 6PFCCP 

“K” STYLE HANGERS 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 32 

7/07 

Metal: Aluminum Copper Galvanized Steel Painted Galvanized Steel 

Size Code Price Code Price Code Price Code Price 

4" N/A 40KCP4 40KGL4 N/A 

5" 40__ __ __5 40KCP5 40KGL5 40K__ __5 

6" 40__ __ __6 40KCP6 40KGL6 40K__ __6

Economy Model 

Crossbar Only for Premium K-Style Fascia Hanger - 50 pcs. per ctn. 

• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR). 




5" 5PCB__ __ 5PCBCP 

6" 6PCB__ __ 6PCBCP 

R-5 Rafter Hanger with Crossbar - 50 pcs. per ctn. 

• Painted Aluminum Available in High Gloss White Only. 

• Recommended Hanger for Extreme Snow Areas. 


Metal: Painted Aluminum 

Size Code Price 

5" R5HGCB 


K-Style Hidden Hanger - 100 pcs. per ctn. 

Standard Box - 100 pcs./ctn. Bulk Box - 500 pcs./ctn. 

Metal: Mill Finished Aluminum Mill Finished Aluminum 


5" HHMT-5 HHMTB-5 

6" HHMT-6 N/A 

K-Style Hidden Hanger with Screw for Straight Back Gutter - 

5" Alum. - 100 pcs./ctn. 6" Alum. - 75 pcs./ctn. 

Metal: Mill Finished Alum. Copper With Screw Copper Without Screw Economy Mill Fin. Alum. 


5" HID5S HIDC5S HIDC5 HID5SE 

6" HID6S HIDC6S HIDC6 HID6SE 

K-Style Hidden Hanger with Screw for Hem Back Gutter - 100 pcs./ctn. 

Metal: Mill Finished Aluminum 


5" HID5SH 

6" HID6SH 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 33 

7/07 

GUTTER ACCESSORIES


Custom Crossbar Hanger - 50 pcs. per ctn. 

Metal: Mill Finished Aluminum-.125" Brass-.125" Stainless Steel-.125" 


5" N/A CB5-BS CB5-SS 

6" CB6-MF CB6-BS CB6-SS 



K-Style Wrap Around Hanger - 50 pcs. per ctn. 

• 5" Aluminum Available in High Gloss White (WA), Royal Brown (BR) and Mill Finished (MF). 

• 6" Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BR). 

• 5" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS). 




5" KWH__ __5 KWHCP5 KWHGL5 KWH__ __5 

6" KWH__ __6 KWHCP6 KWHGL6 N/A 

Hidden Canadian Bar Hanger - 50 pcs. per ctn. 



5" CBH-MF 


K-Style Heavy Duty Hidden Hanger for Straight or Hem Back Gutter - 


• Hanger has Hole to Accept Standard Rod & Nut Assembly for Use as a Roof Mount Application. 



5" HHMF-5 

6" HHMF-6 

• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C.. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 34 

7/07

Ferrule - 100 pcs. per ctn. 

• Bulk Orders are Packed 500 pcs. per ctn.. 

• 5" & 6" Painted Galvanized Steel Available in White Only. 

“J” Bracket used with 5", 6", 7" & 8" High Back Gutter 

Metal: Mill Finish Alum. - 100 pcs./ctn. Brass - 50 pcs./ctn. 


One Size JBRACK JBRACB 

Roof Bar Hanger with Rod & Nut - 100 pcs. per ctn. 



5" RBRHMF 


Gutter Spike - Aluminum 500 pcs. per ctn., Copper & Galvanized 100 pcs. per ctn. 

• 7" & 8" Painted Aluminum Available in White (WA) and Royal Brown (BR). 

• 7" & 8" Painted Galvanized Steel Available in White (WS) and Brown (BS). 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 35 

7/07 

Metal: Painted Aluminum Copper Galvanized Steel Painted Galvanized Steel 


7" SPK__ __7 SPKCP7 SPKGL7 SPK__ __7 

8" SPK__ __8 SPKCP8 SPKGL8 SPK__ __8 

Metal: Mill Finished Alum. Copper Galvanized Steel Painted Galv. Steel Plastic 


4" N/A FERCP4 FERGL4 N/A N/A 

5" FERMF5 FERCP5 FERGL5 FERWS5 FERPL5 

5" Bulk FERBM5 N/A FERGB5 N/A N/A 

6" FERMF6 FERCP6 N/A FERWS6 N/A 

6" Bulk FERBM6 N/A FERGB6 N/A N/A 


GUTTER ACCESSORIES




HALF ROUND HANGERS 

Gem Circle with Spring Clip, Nut & Bolt - 50 pcs. per ctn. 

• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF). 

• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS). 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 36 

7/07 



4" N/A CIRCP4 CIRCS4 N/A 

5" CIR __ __5 CIRCP5 CIRCS5 CIR__ __5 

6" CIR__ __6 CIRCP6 CIRCS6 CIR__ __6 

#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn. 

Metal: Copper Galvanized Steel 


4" CCC104 CCS104 

#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn. 

• 5" & 6" Aluminum Available in High Gloss White (CHG), Royal Brown (CBA) and Mill Finished (A10). 


Metal: Aluminum Copper Galvanized Steel 


5" CB__ __ __5 CCC105 CCS105 

6" CB__ __ __6 CCC106 CCS106 

Face Mount Hanger with Crossbar and Spring Clip - 50 pcs. per ctn. 

• Hanger is Made from 3/16" x 1" Bar Stock and Come with a 1/16" x 1' Crossbar Used for Added Strength. 

• 7" & 8" Galvanized Steel and Paintgrip are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks. 



Metal: Mill Finished Aluminum Copper Galvanized Steel Paintgrip 


7" HRFMF7 HRFCP7 HRFGL7 HRFPG7 

8" HRFMF8 HRFCP8 HRFGL8 HRFPG8 

Hidden Hanger for Reverse Bead Gutter Only (Gutter Not Sold at Berger) 


• Painted Aluminum Available in White Only. 



6" HIDHA6 HIDHC6



Rival Strap Hanger - 50 pcs. per ctn. 

• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF). 





4" N/A RIVCP4 RIVGL4 

5" RIV __ __5 RIVCP5 RIVGL5 

6" RIV__ __6 RIVCP6 RIVGL6 

Regal Bar Hanger - 50 pcs. per ctn. 

• Hanger Includes Rod & Nut Assembly. 

• Improved Version of Imperial Bar Hanger. 

• Hanger Requires Final Form to Bead by Installer. 


Metal: Mill Finished Aluminum Copper Galvanized Steel 


5" REGMF5 REGCP5 REGGL5 




Regal Double Bead Bar Hanger - 50 pcs. per ctn. 

• Hanger Includes Rod & Nut Assembly. 

• Improved Version of Double Bead Hanger. 

• Hanger Requires Final Form to Bead by Installer. 

• 7" & 8" Mill Finished Aluminum Hangers are Considered a Special Order and may Require Extended Lead Time of at Least 2 

Weeks. Special Orders are Not Subject to Cancellation or Return. 




5" REGDM5 REGDC5 REGDG5 




(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 37 

7/07 

GUTTER ACCESSORIES



Regal Single Bead Flange Gutter Roof Strap Hanger - 50 pcs. per ctn. 

• Crossbar Nail Type Hanger. 

Metal: Copper Galvanized Steel 


5" REGFC5 REGFG5 

6" REGFC6 REGFG6 

Rod & Nuts for Regal Bar Hanger - 100 pcs. per ctn. 

• Brass is used with Copper Hanger. 

Metal: Mill Finished Aluminum Brass Galvanized 


One Size RODNUT RNBRAS SRDNUT 

Spring Clip for Gem Circle / #10 Combination Hanger - 50 pcs. per bag 

• Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BA). 


Metal: Painted Aluminum Brass Galvanized Steel 


One Size SPCL__ __ SPCLBR SPCLGL 

Nut & Bolt for Shanks - 50 pcs. per ctn. 

• #10 - 24 Thread x 3/4" Long. 

Metal: Brass Galvanized Steel 


One Size BN-CP BN-S 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 38 

7/07


#6 Shank for Ogee or Crown Molding - 50 pcs. per ctn. 

• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS). 


Copper Galvanized Steel Painted Galvanized Steel 


SHCP-6 SHCS-6 SH__ __-6 

#8 Shank for Cornice - 50 pcs. per ctn. 

Malleable Iron 

Code Price 

SH-CM8 

“K” STYLE & HALF ROUND 

SHANKS 

#10 Shank Plate for Fascia - 50 pcs. per ctn. 

• Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF). 


Aluminum Copper Galvanized Steel 


SH__ __-1 SHCP-1 SHCS-1 

#10 Shank for Fascia - 50 pcs. per ctn. 

• Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA). 

• Painted Galvanized Steel Available in White Only. 


Painted Aluminum Copper Galvanized Steel Painted Galvanized Steel 


SH__ __10 SHCP10 SHCS10 SHWS10 

#11 Shank for Nailing to Exposed Rafter - 50 pcs. per ctn. 



Painted Aluminum Copper Galvanized Steel 


SH__ __11 SHCP11 SHCS11 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 39 

7/07 

GUTTER ACCESSORIES


#12 Shank for Nailing to Sheeting - 1/3 Pitch - 50 pcs. per ctn. 


• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS). 


#25 Shank for Nailing to Sheeting - 1/2 Pitch - 50 pcs. per ctn. 

Copper Galvanized Steel 


SHCP25 SHCS25 

#30 Shank for Adjustable Pitch Rafters & Fascia - 50 pcs. per ctn. 





SH__ __30 SHCP30 SHCS30 

Shank Extension - 50 pcs. per ctn. 


SHANKS 

• Aluminum Available in High Gloss White (HG) and Royal Brown (BA). 




SH__ __EX SHCPEX SHCSEX 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 40 

7/07 

Aluminum Copper Galvanized Steel Painted Galvanized Steel 


SH__ __12 SHCP12 SHCS12 SH__ __12

Right 

Left 

K-Style End Cap - LEFT and RIGHT - 50 pcs. per ctn. 

Half Round End Cap “C” Style - 50 pcs. per ctn. 




END CAPS 

• 5" Aluminum Available in High Gloss White (HG), Satin White (SW), Royal Brown (BR), Clay (CL) and Mill Finished (MF). 

• 6" Aluminum Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF). 

• 7" & 8" Aluminum Available in High Gloss White (HG) and Dark Bronze (DB) . 

• Painted Galvanized Steel Available in White (WS) and Royal Brown (BS). 


Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Gal. Steel Paintgrip (26 Ga.) 


LEFT 

4" N/A ENLCP4 ENL264 N/A N/A 

5" ENL__ __5 ENLCP5 ENL265 ENL__ __5 ENL6G5 




RIGHT 

4" N/A ENRCP4 ENR264 N/A N/A 

5" ENR__ __5 ENRCP5 ENR265 ENR__ __5 ENR6G5 




Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Paintgrip (26 gauge) 


4" N/A CENCP4 CEN264 N/A 

5" CEN__ __5 CENCP5 CEN265 CEN6G5 




(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 41 

7/07 

GUTTER ACCESSORIES


Outside 

Inside 

K-Style 90 Degree Box Miter - INSIDE and OUTSIDE - 20 pcs. per ctn. 

• 5" & 6" Painted Aluminum Available in High Gloss White (SG), Royal Brown (SB), Clay (CL), Satin White (SW) and 

Dark Bronze (DB) - 6" Only. 

• 7" & 8" Painted Aluminum Available in High Gloss White (32) and Royal Brown (BR). 

• 5" & 6" Painted Galvanized Steel Available in White Only. 

• 7" & 8" Painted Aluminum and Copper Miters will have Break Lines. 


K-Style 90 Degree Strip Miter - INSIDE and OUTSIDE - 20 pcs. per ctn. 

• 5" & 6" Painted Aluminum Available in High Gloss White (HG), Satin White (LG) and Royal Brown (BA). 




INSIDE 

5" SMI__ __5 

6" SMI__ __6 

OUTSIDE 

5" SMO__ __5 

6" SMO__ __6 

“K” STYLE MITERS 

Metal: Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Gal. Steel Paintgrip (26 Ga.) 


INSIDE 

4" N/A N/A KIS264 N/A N/A 

5" KIS__ __5 KISCP5 KIS265 KISWS5 KIS6G5 

6" KIS__ __6 KISCP6 KIS266 KISWS6 KIS6G6 

7" KIS__ __7 KISCP7 KIS267 N/A N/A 

8" KIS__ __8 KISCP8 KIS268 N/A N/A 

OUTSIDE 

4" N/A N/A KOS264 N/A N/A 

5" KOS__ __5 KOSCP5 KOS265 KOSWS5 KOS6G5 

6" KOS__ __6 KOSCP6 KOS266 K0SWS6 KOS6G6 

7" KOS__ __7 KOSCP7 KOS267 N/A N/A 

8" KOS__ __8 KOSCP8 KOS268 N/A N/A 

Inside 

Outside 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 42 

7/07

Outside 

Inside 

Half Round 90 Degree Miter - INSIDE and OUTSIDE - 20 pcs. per ctn. 

• 5" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF). 

• 6", 7" & 8" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA). 


HALF ROUND MITERS 

Metal: Aluminum Copper (16 Oz.) Galv. Steel (26 Ga.) Paintgrip (26 Ga.) 


INSIDE 

4" N/A LISCP4 LIS264 N/A 

5" LIS__ __5 LISCP5 LIS265 LIS6G5 

6" LIS__ __6 LISCP6 LIS266 LIS6G6 

7" LIS__ __7 LISCP7 LIS267 N/A 

8" LIS__ __8 LISCP8 LIS268 N/A 

OUTSIDE 

4" N/A LOSCP4 LOS264 N/A 

5" LOS__ __5 LOSCP5 LOS265 LOS6G5 

6" LOS__ __6 LOSCP6 LOS266 LOS6G6 

7" LOS__ __7 LOSCP7 LOS267 N/A 

8" LOS__ __8 LOSCP8 LOS268 N/A 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 43 

7/07 

GUTTER ACCESSORIES


K-Style End Piece - 5" x 3" - 20 pcs. per ctn. 

• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR). 

• 5" x 3" Painted Galvanized Steel is Available in White Only. 


Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) Painted Gal. Steel 


5" x 3" KEP__ __5 KEPCP5 KEP265 KEPWS5 

Half Round End Pieces - 20 pcs. per ctn. 

• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA). 


Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) 


4" x 3" N/A N/A DE2643 

5" x 3" DEP__ __5 DECP53 DE2653 

6" x 4" N/A N/A DE2664 

K-Style Slip Joint - 50 pcs. per ctn. 

• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR). 

• 5" Painted Galvanized Steel Available in White Only. 

• KSJ265 Available in 30 pieces per carton. 


Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) Painted Gal. Steel 


4" N/A N/A KSJ264 N/A 

5" KSJ__ __5 KSJCP5 KSJ265 KSJWS5 

Half Round Slip Joint - 50 pcs. per ctn. 

• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA). 



END PIECES / SLIP JOINTS 

Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) 


4" N/A SCNCP4 SCN264 

5" SCN__ __5 SCNCP5 SCN265 

6" SCN__ __6 SCNCP6 SCN266 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 44 

7/07

3” & 4” 

5” & 6” 

U. S. Patent 4,619,544 

U. S. Patent 4,619,544 

K-Style Square Outlet with “Lock-In” Design - 50 pcs. per ctn. 

• Mill Finished Aluminum Square Outlets are Pop Rivet Style. 

• Painted Aluminum is Available in White Only. 


OUTLETS 

Metal: Mill Finished Aluminum Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) 


2" x 3" SKOMF3 SKOHG3 SKOCP3 SKO263 

3" x 4" SKOMF4 SKOHG4 SKOCP4 SKO264 

4" x 5" SKOMF5 N/A SKOCP5 SKO265 

K-Style Oval Outlet with “Lock-In” Design - 50 pcs. per ctn. 

Metal: Mill Finished Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) 


3" OKOMF3 OKOCP3 OKO263 

4" OKOMF4 OKOCP4 OKO264 

K-Style Wide Flange Pop Rivet Oval Outlet - 50 pcs. per ctn. 

• 3" Aluminum is Available in Mill Finished Only. 

• 4" Aluminum is Available in White Only. 

• 3" & 4" Painted Galvanized Steel are Available in White Only. 


Half Round B Style Outlet - 50 pcs. per ctn. 

• 3" & 4" Aluminum is Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF). 

• 5" & 6" Aluminum is Available in Mill Finished Only. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 45 

7/07 

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Galvanized Steel 


3" WKOMF3 WKOCP3 WKOGS3 WKOWS3 

4" WKOWA4 N/A WKOGS4 WKOWS4 

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) 


3" RBO__ __3 RBOCP3 RBO263 

ACCESSORIES 

4" RBO__ __4 RBOCP4 RBO264 

5" RBOMF5 RBOCP5 RBO265 

6" RBOMF6 RBOCP6 RBO266 GUTTER


Half Round WB Pop Rivet Style Outlet - 50 pcs. per ctn. 

• 3" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA). 



OUTLETS 

Half Round Wide Flange B Style Outlet - 50 pcs. per ctn. 

• 3" & 4" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA). 




3" WBO__ __3 

4" WBO__ __4 

Metal: Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) 


3" WBP__ __3 WBPCP3 WBP263 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 46 

7/07

3" & 4" Conductor Heads 5" & 6" Conductor Heads 

NOTE: Small spot welds may be visible on Galvanized Steel Conductor Heads Only. 


CONDUCTOR HEADS 

Plain Conductor Head with Oval Outlet* - 3" - 6 pcs. per ctn. 4" - 4 pcs. per ctn. 5" - 3 pcs. per ctn. 

3" Plain Conductor Head 4" Plain Conductor Head 5" Plain Conductor Head 

*5” Plain Conductor Head has a Square Outlet. 

#14 Conductor Head with Oval Outlet - 

3", 4" & 5" - 6 pcs. per ctn. 6" - 4 pcs. per ctn. 

Metal: Copper Galvanized Steel Paintgrip 


Molded Universal Conductor Head 

• Available in White Only. 

• Suited for Any Outlet Shape or Size. 

Polypropylene "Plastic" 

Code Price 

CHFMUW 

3" CHOCP3 CHOGL3 CHFPG3 

4" CHOCP4 CHOGL4 CHFPG4 

5" CHOCP5 CHOGL5 N/A 

6" CHOCP6 CHOGL6 N/A 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 47 

7/07 

• 3" and 4" Aluminum Available in High Gloss 

White (HG) and Royal Brown (BR). 

• 5" Aluminum Available in High Gloss White 

Only. 




3" CHO__ __3 

4" CHO__ __4 

5" CHOHG5 

GUTTER ACCESSORIES


Square "Y" Funnel - 12 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White (HG), Low Gloss White (LG) and Royal Brown (BR). 




2" x 3" SCY__ __3 

3" x 4" SCY__ __4 


EAVE BOXES / FUNNELS / 

DIVERTERS 

Regular (Open), Closed and Sloped Eave Boxes - 

Regular & Closed - 12 pcs. per ctn. Sloped - 6 pcs. per ctn. 

• All Painted Aluminum Available in High Gloss White Only. 



REGULAR (OPEN) 

3" x 12" EBWA32 EBCP32 

3" x 16" EBWA36 EBCP36 

4" x 12" EBWA42 EBCP42 

CLOSED 

3" x 16" CBWA36 CBCP36 

4" x 16" CBWA46 CBCP46 

SLOPED 

3" x 16" SBWA36 SBCP36 

4" x 16" SBWA46 SBCP46 

Oval Funnel - 12 pcs. per ctn. 

• Painted Aluminum is Available in White (WA) and Royal Brown (BR). 


Metal: Painted Aluminum Copper Galvanized Steel 


3" FUN__ __3 FUNCP3 FUNGL3 

4" FUN__ __4 N/A FUNGL4 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 48 

7/07

Downspout Tube - 12 pcs. per ctn. 



DIVERTERS / 

DOWNSPOUT TUBES 

Square Cutoff with Diverter - 12 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White (WA), Low Gloss White (LG) and Royal Brown (BA). 




2" x 3" SAC__ __3 

3" x 4" SAC__ __4 

Round Corrugated Cutoff with Diverter - 12 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White Only. 




3" RC RCCWA3 



2" DSTWA2 DSTCP2 DSTGL2 



(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 53 

7/07 

GUTTER ACCESSORIES


Brick Hook - ROUND and SQUARE - 50 pcs. per ctn. 

• Painted Galvanized is Available in White Only. 


PIPE FASTENERS 

Metal: Galvanized Steel Painted Galvanized Steel 


ROUND 

3" BPRGL3 BPRWS3 

4" BPRGL4 BPRWS4 

SQUARE 

2" x 3" BPSGL3 BPSWS3 

3" x 4" BPSGL4 BPSWS4 

Stamped Sickle Hook for Wood - ROUND and SQUARE - 50 pcs. per ctn. 

Metal: Galvanized Steel Painted Galv. - White Painted Galv. - Royal Brown 


ROUND 

3" PWHGL3 PWHWS3 PBRSH3 

4" PWHGL4 PWHWS4 PBRSH4 

SQUARE 

2" x 3" SSWGL3 SSWWS3 SHBRA3 

3" x 4" SSWGL4 SSWWS4 SHBRA4 

Plain Round and Round Corrugated Hinged Downspout Hook - 

3" & 4" - 50 pcs./ctn. 5" - 25 pcs./ctn. 

• Non-Stock Item. Please Allow Extended Lead Time. 

• Copper Plated Zinc Alloy. 

• Must be Purchased in Full Box Quantities. 

Metal: Coppered 


PLAIN ROUND 

3" HHPRC3 

4" HHPRC4 

5" HHPRC5 

ROUND CORRUGATED 

3" HHRCC3 

4" HHRCC4 

5" HHRCC5 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 54 

7/07

Rack & Key - 50 pcs. per ctn. 

• Aluminum is Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF). 

• Two Racks are Recommended per 10 ft. Downspout Section. 




One Size RAK__ __ __ RAK-CP RAK-CS 

Key - 50 pcs. per ctn. 

Metal: Mill Finished Aluminum Bronze (Used w/ Copper) 


One Size KEY-MF KEY-BR 



Plain Round Cast Bronze Sickle Hook - 25 pcs per ctn. 



Metal: Bronze 


4" PWHBZ4 

6" PWHBZ6 

2" x 3" and 3" x 4" Square Side-Fasten Hook - 50 pcs. per ctn. 






2" x 3" SFHC23 

3" x 4" SFHC34 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 55 

7/07 

Square Wired Wood/Brick Hook - 2" x 3" and 3" x 4" - 50 pcs. per ctn. 4" x 5" - 25 pcs. per ctn. 






2" x 3" WFHC23 

3" x 4" WFHC34 

4" x 5" WFHC45 

GUTTER ACCESSORIES


#0 Masonry Drive - 50 pcs. per ctn. 

Bronze Galvanized Steel 


DR-BR0 DRCS-0 

#4 Wood Drive - 50 pcs. per ctn. 

Copper Galvanized Steel 


DRCP-4 DRCS-4 

#5 Wood Drive - 50 pcs. per ctn. 

Malleable Iron 

Code Price 

DR-CM5 

#6 Drive - 50 pcs. per ctn. 



• Requires Rack & Key to Install. 

• Two Drives are Recommended per 10 ft. Downspout Section. 





• Aluminum Available in High Gloss White (WA-), Royal Brown (BRA) and Mill Finished (MF-). 

• Painted Galvanized Steel Available in White Only. 






DR__ __ __6 DRCP-6 DRCS-6 DRWS-6 

U-Bracket - 50 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White Only. 

• Two Brackets are Recommended per 10 ft. Downspout Section. 



2" x 3" UBR-WA UBR-CP 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 56 

7/07

#31 Pipe Cleat - 50 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White (HG) and Brown (BR). 

• Two Pipe Cleats are Recommended per 10 ft. Downspout Section. 


Painted Aluminum Copper 


PC__ __31 PCCP31 



Conductor Bracket - 50 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White (HG) and Royal Brown (BA). 

• Two Brackets are Recommended per 10 ft. Downspout Section. 




2" x 3" CB__ __-3 CBCP-3 

Universal Conductor Band - 50 pcs. per ctn. 

• Aluminum is Available in High Gloss White (WA), Low Gloss White (LG), Royal Brown (BA), Dark Bronze (DB) and 

Mill Finished (MF). 


• Two Conductor Bands are Recommended per 10 ft. Downspout Section. 


Metco Ornamental Conductor Bands - 100 pcs. per ctn. 

• Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Dark Bronze (DB). 

• Two Conductor Bands are Recommended per 10 ft. Downspout Section. 




3" MET__ __3 METCP3 METGA3 

4" MET__ __4 METCP4 METGA4 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 57 

7/07 



__ __12CB CP12CB GA12CB __ __12CB 

GUTTER ACCESSORIES


Wire Strainers - ROUND - 2", 3" & 4" - 50 pcs./ctn. 5" & 6" - 20 pcs./ctn. 



2" RWSMF2 RWSCP2 RWSGL2 





#42 Pop Rivet 1 1/2" - Aluminum 1,000 pcs./ctn. Stainless Steel 100 pcs./ctn. 

Copper & Galvanized Steel 500 pcs./ctn. 

• Painted Aluminum Available in White (BW) and Royal Brown (BB). 


Painted Aluminum Copper Galvanized Steel Stainless Steel 


A42A__ __ A42CPB A42GLB A42SSB 

#44 Pop Rivet 1 5/8" - Aluminum 1,000 pcs./ctn. Copper 500 pcs./ctn. 

• Painted Aluminum Available in White (BW), Royal Brown (BB) and Dark Bronze (DB). 


Painted Aluminum Copper 


A44A__ __ A44CPB 

Gutter Wedge - 100 pcs. per ctn. 

• Painted Aluminum Available in White Only. 



One Size GW-WA 

Trim Nails - 1 lb. box 

• Aluminum Available in White Only. 



1" 100WAW 


MISCELLANEOUS ACCESSORIES 

• Round Strainers can be used in Square Holes when Reformed by Hand. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 58 

7/07

Trim Nails 1 1/4" - Aluminum - 1 lb. box Copper - 1/4 lb. box 

• Aluminum Available in White (WAW) and Brown (BAW). 




1 1/4" 114__ __ __ 114CCP 

Gutter Mastic 5 oz. Tubes - 24 pcs. per ctn. 

• Available in White (WA) and Mill Finished (MF). 


Code Price 

MAS__ __8 

Touch-Up Paint 12 oz. Cans - 12 pcs. per ctn. 

• Available in High Gloss White (WHG), Satin White (SWP), White Steel (WSP), Royal Brown (BRP), Dark Bronze (DBP) 

and Ivory (IVY). 


Code Price 

TUP__ __ __ 


MISCELLANEOUS ACCESSORIES 

SeamerMate ® 10 oz. Tubes - 12 pcs. per ctn. 

• Available in Gray Only. 

Code Price 

SMMTGR 

No-Caulk Pipe Flashing - 12 pcs. per ctn. 



1 1/2" OMFN15 

2" OMFN20 

3" OMFN30 

4" OMFN40 

Ladder-Max Universal Ladder Stabilizer - 1 pc. per ctn. 

• The galvanized steel Ladder-Max Ladder Stand-Off Stabilizer Helps Improve Efficiency and Facilitates Ladder Productivity 

• Size: 20-3/4"h x 38-1/2"w, Weight: 7 lbs. 11 oz. 

• Stand-Off Depth is 19" 

• OSHA and ANSI Certified and Easily Attaches and Detaches without Tools to Most Ladder Styles 

Code Price 

LADMAX 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 59 

7/07 

GUTTER ACCESSORIES



GUTTER GUARDS 

K-Style Gutter Shingle - 20 pcs. per ctn. - 3' long ea. 

• Can be Used with 5"K or 6"K Gutter. 

• Powder Coated Steel Weatherwood can be Used with Steel or Aluminum. 

Metal: Copper Steel Weatherwood 


5" - 6" K GGSKCP GGSKPC 

K-Style Drop-In Gutter Guard - Aluminum 50 pcs. per ctn. 

Copper 25 pcs. per ctn.- 3' long ea. 

Metal: Mill Finished Aluminum Copper Galvanized 


5"K GG5KDI GG5KCDI GG5KGDI 

6"K GG6KDI GG6KCDI GG6KGDI 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 60 

7/07 

K-Style Hinged Gutter Guard - Aluminum & Galv. Steel 75 pcs. per ctn. - 

Painted Galv. Steel 50 pcs. per ctn. - Copper 25 pcs. per ctn. - 3' long ea. 

• Painted Galvanized Steel can be Used with 5"K or 6"K Gutter. 

• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K). 


Metal: Mill Finished Aluminum Copper Galvanized Steel Painted Galvanized Steel 


5"K GGAK-5 GGCK-5 GGGLK5 GGPC__6 

6"K GGAK-6 GGCK-6 GGGLK6 GGPC__6 

7"K N/A N/A GGGLK7 N/A 

K-Style Lock-On Gutter Guard - 25 pcs. per ctn. - 4' long ea. 

• Painted Galvanized Steel is Available in Black Only. 

Metal: Painted Galvanized Steel 


5" K GG5KKDI 

6"K GG6KKDI


GUTTER GUARDS 

K-Style NoLeaf Gutter Cover - 25 pcs. per ctn. - 4' long ea. 

• Installs on New or Existing K-Style Gutter Systems. 

• Stock Colors are Available in Almond (AL), Clay (CL), Cream (CR), Linen (LI), Royal Brown (RB), and White (WH). 

• Special Order Colors are Available in Beaver Brown (BB), Black (BL), Buckskin Brown (BU), Terra Bronze (BZ), CB Grey (CBG), 

Bronze (FBZ), Grecian Green (GG), Herringbone (HE), Ivory (IV), Musket Brown (MB), Pearl Gray (PG), Tuxedo Grey (TG) and 

Wicker (WI). 

• Special Order Colors may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not Subject to Cancellation or 

Return. 


Metal: .024 Gauge Aluminum 


One Size MNL__ __ __ 

NoLeaf Gutter Guard Bracket - 50 pcs. per ctn. 

• Use 2 Brackets per 4' Piece 

• PVC is Available in White (W) and Clay (C). 




One Size MNLB 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 61 

7/07 

K-Style Solid Snap-In Plastic Gutter Cover - 25 pcs. per ctn. - 4' long ea. 


• PVC is Available in White (W) and Clay (C). 


Metal: PVC 


5" - 6" K SPGC6K__4 

K-Style Diamond Shaped Snap-In Plastic Gutter Cover with Mesh Backing 

- 50 pcs. per ctn. - 3' long ea. 


• PVC is Available in White (W), Brown (B) and Black (K). 


Metal: PVC 


5" - 6" K PVCSI6__ 

GUTTER ACCESSORIES


Half Round Hinged Gutter Guard - Aluminum 50 pcs. per ctn. - 

Copper 25 pcs. per ctn. - 3' long ea. 

Metal: Mill Finished Aluminum Copper 


5" HR GGAR-5 GGCR-5 

6" HR GGAR-6 GGCR-6 

Splash Blocks 

Green Brown Gray 


SBGN06 SBBR07 SBGR34 

Flex-A-Spout - 12 pcs. per ctn. 

• Available in Brown (BR), Green (GR) and White (WH). 

• Sold in Full Box Quantities Only. 



GUTTER GUARDS 

Brown Green White 


FLXSBR FLXSGR FLXSWH 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 62 

7/07

Step Flashing 

STEP FLASHING 

Size/Description Metal/Color Pcs. Per Box Code Price 

2.5" x 2.5" x 7" Pre-Bent Brown Aluminum 500 SFB227 

2" x 3" x 7" Pre-Bent Brown Aluminum 500 SFB237 






3" x 5" x 8" Pre-Bent .019 Brown Aluminum 250 SF9B358 

3" x 5" x 12" Pre-Bent .019 Brown Aluminum 250 SF9B352 

2.5" x 2.5" x 7" Pre-Bent Black Aluminum 500 SFK227 

2" x 3" x 7" Pre-Bent Black Aluminum 500 SFK237 






3" x 5" x 8" Pre-Bent .019 Black Aluminum 250 SF9K358 

3" x 5" x 12" Pre-Bent .019 Black Aluminum 250 SF9K352 

2.5" x 2.5" x 7" Pre-Bent Mill Finished Aluminum 500 SFM227 

2" x 3" x 7" Pre-Bent Mill Finished Aluminum 500 SFM237 







5" x 7" Flat Mill Finished Aluminum 500 STFLMF 

6" x 8" Flat Mill Finished Aluminum 500 STMF68 

7" x 10" Flat Mill Finshed Aluminum 500 SFM710 

8" x 10" Flat Mill Finished Aluminum 500 SFM810 

5" x 7" Flat Black/Brown Aluminum 500 STFLBB 

6" x 8" Flat Black/Brown Aluminum 500 STBB68 

2.5" x 2.5" x 7" Pre-Bent 16 Oz. Copper 100 SFC227 

2" x 3" x 7" Pre-Bent 16 Oz. Copper 100 SFC237 

5" x 5" x 8" Pre-Bent 16 Oz. Copper 50 SFC558 

5" x 7" Flat 16 Oz. Copper 100 STFLCP 

2" x 3" x 7" Pre-Bent 30 Ga. Galv. Steel 100 SFG237 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 63 

7/07 

ROOF EDGING AND TRIM

ROOF EDGING AND TRIM 

A5 

B4 1/2 

BS4 1/2 

C3 

CS4 

A5 Drip Edge 

B4 1/2 Roof Edge 

• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA). 


Painted Aluminum - 500'/ctn. 

Gauge Code Price 

.019 B45__ __B 

BS4 1/2 Roof Edge 





.019 BS45__ __ 

C3 Drip Edge 

• .019 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF). 

• .0125 Aluminum is Available in White (WA) and Mill Finished (MF). 


Aluminum - 500'/ctn. 


.019 C-3__ __B 

.0125 C-3__ __2 

CS4 Drip Edge 




Aluminum - 500'/ctn. Copper - 200'/ctn. 

Gauge Code Price Gauge Code Price 

.019 CS4__ __B 16 oz. CS4CPB 

.0125 CS4__ __2 






.0125 A-5__ __2 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 64 

7/07

C3 1/2 

C4 

C4 1/2 

C5 

C3 1/2 Drip Edge 



.024 C35__24 16 oz. C35CPB 

.019 C35__ __B 

.016 C35__ __6 

.0125 C35WA2 


• .024 Aluminum is Available in White (W) and Requires a 2 Week Lead Time. 

• .024 Aluminum is 250'/ctn. 

• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Musket Brown (MB) and Mill Finished (MF). 


• .0125 Aluminum is Available in White Only. 

• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS). 


Aluminum - 500'/ctn. Copper - 200'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn. 

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price 

.024 C45__24 16 oz. C45CPB 28 ga. C45GLB 26 ga. C45__ __B 

.019 C45__ __B 

.016 C45__ __6 

.0125 C45WA2 


• .024 Aluminum is Available in White (W) and Royal Brown (B) and Requires a 2 Week Lead Time. 


• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Ivory (IA). 

• .016 Aluminum is Available in White (WA) and Royal Brown (BA). 

• .0125 Aluminum is Available in White Only. 


C4 Drip Edge 

• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE. 

Copper - 200'/ctn. Galvanized Steel - 200'/ctn. 


16 oz. C-4CPBD 26 ga. G90 C-4G90 

C5 Drip Edge 





.0215 C-5__ __2 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 65 

7/07 



C5 1/2 

C6 

C7 

C9 


C6 Drip Edge 

C9 Drip Edge 

• .032 Painted Aluminum is Available in White Only. 

• Requires a 2 Week Lead Time. 



.032 C-93WA 


• .032 Aluminum and .024 Aluminum are Available in White (W) and Royal Brown (B) and Require a 2 Week Lead Time. 

• .032 Aluminum and .024 Aluminum are 250'/ctn. 

• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF). 

• .016 Aluminum and .0125 Aluminum are Available in White (WA) and Royal Brown (BA). 



• .032 Aluminum is Available in White (WB), Royal Brown (BA), Dark Bronze (DZ) and Mill Finished (MF). 

• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Bronze (BZ). 

• 28 Gauge Galvanized Steel is 100'/ctn and 26 Gauge Galvanized Steel is 200'/ctn. 



Page 66 

7/07 



.032 C55__3B 16 oz. C55CPB 28 ga. C55GLB 26 ga. C55__ __B 

.024 C55__24 

.019 C55__ __B 

.016 C55__ __6 

.0125 C55__ __2 

Aluminum - 250'/ctn. Copper - 100'/ctn. Galvanized Steel Painted Galv. Steel - 100'/ctn. 


.032 C-63__ __ 16 oz. C-6CPB 28 ga. C-6GLB 26 ga. C-6__ __B 

C7 Drip Edge 



.032 C-73__ __ 

26 ga. G90 C-6G90 

• .032 Painted Aluminum is Available in White (WB), Royal Brown (BA) and Dark Bronze (DB). 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

D3 

D4 

E3 

E4 

E6 

D3 and D4 Rake Edge 

E3 Roofers Angle 






.019 E-3__ __B 

.016 E-3WA6 







D3 

.019 D-3__ __B 

D4 

.019 D-4__ __B 



• 28 Gauge Galvanized Steel is 250'/ctn and 26 Gauge Galvanized Steel is 200'/ctn 


Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel 

Gauge Code Price Gauge Code Price Gauge Code Price 

.019 E-4__ __B 16 oz. E-4CPB 28 ga. E-4GLB 

.016 E-4__ __6 




• 26 Gauge Painted Galvanized Steel is Available in White Only. 


Painted Aluminum - 500'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn. 


.019 E-6__ __B 28 ga. E-6GLB 26 ga. E-6WSB 

.016 E-6__ __6 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 67 

7/07 



E8 

E9 

F4 1/2 

FSN 4 1/2 


F4 1/2 Drip Edge 

• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and 


• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (WA) and Royal Brown (BA). 

• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K). 




.019 F45__ __B 16 oz. F45CPB 30 ga. F45GS3AX 30 ga. F45__S3AX 

.016 F45__ __6 

.0125 F45__ __2 

FSN4 1/2 High Tensile Drip Edge 

• .014 Painted Aluminum is Available in White (W), Royal Brown (B) and Black (K). 

• .0125 Painted Aluminum is Available in White (W) and Brown (B). 




.014 FS45__4 

.0125 FS45__2 





Painted Aluminum - 250'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 100'/ctn. 


.019 E-8__ __B 28 ga. E-8GLB 26 ga. E-8WSB 



Copper - 200'/ctn. Galvanized Steel - 200'/ctn. 


16 oz. E-9CPBD 26 ga. G90 E-9G90 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 68 

7/07

F5 

F5 

F5M 

F5 Drip Edge 

• .024 Painted Aluminum is Available in White (W) and Brown (B). 


• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and 







.024 F-5__24 16 oz. F-5CPB 28 ga. F-5GLB 26 ga. F-5__ __B 

.019 F-5__ __B 

.016 F-5__ __6 

F5 Open Drip Edge 


• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA) and Mill Finished (MF). 





.019 F5O__ __B 16 oz. F5OCPB 

.016 F5O__ __6 

.0125 F5O__ __2 

F5M (Medium) Drip Edge 

• .019 Aluminum is Available in White (WA), Royal Brown (BA), Clay (CL), Musket Brown (MB), Ivory (IA) and Mill Finished (MF). 

• .016 Painted Aluminum is Available in White (WA), Clay (CL) and Royal Brown (BA). 

• .013 and .011 Painted Galvanized Steel are Available in White (W) and Brown (B). 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 69 

7/07 



.019 F5M__ __B 16 oz. F5MCPB 28 ga. F5MGLB .013 F5M__13 

.016 F5M__ __6 .011 F5M__11 



F5 1/2 

FR4 1/2 

FR5 

F8 

F5 1/2 Open Drip Edge 

FR5 Drip Edge 

• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA) and Black (BK). 



Painted Aluminum - 500'/ctn. Galvanized Steel - 200'/ctn. 


.019 FR5__ __B 28 ga. FR5GLB 

.016 FR5__ __6 

F8 Drip Edge 


• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA), Mill Finished (MF) and Black (BK). 





.024 F-8W24 16 oz. F-8CPB 30 ga. F-83GL 30 ga. F-83WS 

.019 F-8__ __B 

.0125 F-8__ __2 


• .019 Aluminum is Available in White (WB), Royal Brown (BB) and Mill Finished (MF). 

• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (W) and Royal Brown (B). 




.019 F55O__ __ 

.016 F55O__6 

.0125 F55O__2 

FR4 1/2 Drip Edge 

• .019 Painted Aluminum and .016 Painted Aluminum are Available in White Only. 




.019 FR45WB 

.016 FR45W6 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 70 

7/07

H5 1/2 

H6F 

H7 

Vented 

H5 1/2 Slag Stop 







.019 H55__ __B 16 oz. H55CPB 28 ga. H55GLB 26 ga. H55__ __B 

.016 H55__ __6 

H6F Slag Stop 


• .032 Aluminum is Available in White (W), Royal Brown (B), Dark Bronze (D) and Mill Finished (M). 

• .032 Aluminum and .024 Aluminum are 250'/ctn. 






(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 71 

7/07 



.032 H6F__3B 16 oz. H6FCPB 28 ga. H6FGLB 26 ga. H6F__ __B 

.024 H6FW24 

.019 H6F__ __B 

.016 H6F__ __6 

H7 Slag Stop 

• .032 Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF). 




.032 H-73__ __ 

Vented Drip Edge - 5.0 Sq. In. of Net Free Area per Linear Ft. 

• .027 Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Mill Finished (MF). 




.027 VDE-__ __ 16 oz. VDE-CP 



DC1 

DC2 

ODE 

ODLR 

DC3 

DCW 3/4 

DCW 1 1/8 

DCW 1 5/16 

ODE Overhanging Drip Edge 

Painted Aluminum - 500'/ctn. Copper - 150'/ctn. 


.019 ODE-__ __ 16 oz. ODE-CP 

.016 ODE__ __6 

ODLR Drip Edge 

• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA), Clay (CL), Black (BK), Desert Tan (DT), Ivory (IA), 

Light Bronze (LB), Musket Brown (MB), Prairie Sand (PS) and Sandstone Beige (SB). 




.019 ODLR__ __ 

DC1, DC2, DC3, DCW 3/4, DCW 1 1/8, and DCW 1 5/16 Drip Cap 


Painted Aluminum 


DC1 - 500'/ctn. 

.0125 DC1WA2 

DC2 - 1000'/ctn. 

.0125 DC2WA2 

DC3 - 1000'/ctn. 

.0125 DC3WA2 

DCW 3/4 - 1000'/ctn. 

.0125 DCWW34 

DCW 1 1/8 - 1000'/ctn. 

.0125 DCWW18 

DCW 1 5/16 - 1000'/ctn. 

.0125 DCWW56 


• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA), Dark Bronze (DB), Black (BK) and Clay (CL). 



(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 72 

7/07

W 

V 

2" Round Ridge Roll 

• Aluminum is Available in White (WA), Brown (BA) and Mill Finished (MF). 



Aluminum - 200'/ctn. Copper - 100'/ctn. Galvanized Steel - 100'/ctn. 


.019 RRO__ __2 16 oz. RROCP2 28 ga. RRO282 

Deck Ledger Flashing Cap - 40 pcs./ctn. 

• Fits Over Ledger Board and Behind Siding to Protect from Water Damage. 

Plastic - 320'/ctn. 

Color Code Price 

Gray DLPGR8 

“W” Valley - 10' Lengths 

• .019 Painted Aluminum is Available in Black (BK) and Brown (9B). 



.019 Painted Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel 26 Gauge G90 Galv. Steel 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 73 

7/07 

Size Code Price Size Code Price Size Code Price Size Code Price 

18” WF__ __18 18” WFCP18 18” WF2618 18" WFG9018 

24” N/A 24” WFCP24 24” N/A 24" WFG9024 

“V” Valley 

• .032 Painted Aluminum is Available in Brown (B) and Black (K). 

• Copper is Available in 10' Lengths Only. 

• Mill Finished Aluminum and Galvanized Steel is Available in Various Lengths - 10' (1) and 8' (8). 

ENTER LENGTH/COLOR WHEN ORDERING 

.032 Painted Aluminum Mill Finished Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel 

Size Price Code Size Code Price Size Code Price Size Code Price 

18" V1__318 18" V1MF18 18" V1CP18 18" V__2618 



Brick Molding 




.019 BMCWA9 

CornerFlex ® Flashing - 20 pcs./ctn. 

• Sold in Full Box Quantities Only. 

Mill Finished Aluminum 


.012 FCF-MF 

Left Diverter Right Diverter 


KOL__ KOR__ 


Polypropylene Kick-Out Diverters - 30 pcs./ctn. 

• Durable polypropylene copolymers with UV & heat stabilizers. 

• Available in Brown (B), Grey (G), Tan (T) and White (W). 

• Patented design creates downward and outward water flow away from walls. 

• Helps prevent water intrusion at roof to wall intersections. 

• Easy to install & works with all leading roofing & wall cladding systems. 


Copper Kick-Out Diverter - 5 pcs./ctn. 

• Available in 16 Oz. Copper. 

Left Diverter Right Diverter 


KOLCP KORCP 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 74 

7/07

QLOK SYSTEM: 

QLOK SYSTEM: 

TRAPLOK SYSTEM: 

PRO LOCK SYSTEM: 

ALUMINUM SOFFIT & 

ACCESSORIES 

10" QLOK .019 Aluminum Soffit - 

120'/ctn. 1 sq./ctn. 10 pcs./ctn. 12' per piece 

9.6 In 2 Net Free Area/Ft 2 

• Available in White (WA), Royal Brown (BA), Dark Bronze (DB), and Clay (CL). 


SOLID (NON-VENTILATED) VENTILATED 


QS10__ __ QV10__ __ 

15" QLOK .019 Aluminum Soffit - 

120'/ctn. 1.5 sqs./ctn. 10 pcs./ctn. 12' per piece 


• Available in White (WA) and Royal Brown (BA). 




QS15__ __ QV15__ __ 

12" TRAPLOK .019 Aluminum Soffit - 

120'/ctn. 1.2 sqs./ctn. 10 pcs./ctn. 12' per piece 


• Available in White (WA), Royal Brown (BA) and Dark Bronze (DB). 




SV12__ __ LV12__ __ 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 75 

7/07 

12" PRO LOCK V-Groove 16 Oz. Copper Soffit - 

Custom Lengths 8.8 In 2 Net Free Area/Ft 2 

Berger will manufacture our Copper Soffit to size for your job. This product is not 

for use as vertical siding and cannot be run in lengths longer than 24 inches unless 

specifically engineered and quoted for the job. Please call for availability. 

• This is a Non-Stock Item and may Require Extended Lead Time. 



SS12C2 SV12C2 

PRODUCT INFORMATION: 

• QLOK style is recommended for use in coastal or windy environments. 

• Attachment of soffit requires nailing on 12" centers when used in areas subjected to wind uplift and vibration. 

• Short soffit overhangs of 16" or less require at least 1 nail per piece central of the hem. 

SOFFIT AND VENTILATION PRODUCTS

SOFFIT AND VENTILATION PRODUCTS 

AccuVent Soffit Insulation Baffler - 50 pcs./bundle - 56 bundles/skid 

• AccuVent is 22.5" x 41" and Fits Any Size Roof or Truss 

• Installs with Six Staples 

• Perforated for Adjusted Roof Truss Spacing 

100% Recycled PVC 

Code Price 

ACCUVENT 

.024 Aluminum Fascia - 300'/ctn. 25 pcs./ctn. 

• 4" Fascia is Available in White (WA) and Royal Brown (BA). 

• 6" Fascia is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Clay (CL). 

• 8" Fascia is Available in White (WA), Clay (CL) and Royal Brown (BA). 

• 10" Fascia is Available in White (WA), Royal Brown (BA) and Dark Bronze (DB). 


4" 6" 8" 10" 


FAS4__ __ FAS6__ __ FAS8__ __ FAS1__ __ 

.019 Aluminum 1/2 “F” Channel - 300'/ctn. 25 pcs./ctn. 

• Painted Aluminum is Available in White (-W), Brown (-B), Clay (CL), Dark Bronze (DB) and Light Bronze (LB). 


Code Price 

FA50__ __ 


ACCESSORIES 

.019 Aluminum Fascia - 300'/ctn. 25 pcs./ctn. 

• 6" Fascia is Available in White (WA), Desert Tan (DT), Granite Gray (GR), Ivy Green (IG), Light Bronze (LB), Natural Clay (NC), 

Prairie Sand (PS) and Sandstone Beige (SB). 


6" 

Code Price 

FA96__ __ 

.019 Aluminum 1/2 “J” Channel - 600'/ctn. 50 pcs./ctn. 

• Painted Aluminum is Available in White (-W) and Royal Brown (-B). 


Code Price 

JA50__ __ 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 76 

7/07

.019 Aluminum 1/2 Economy “J” Channel - 600'/ctn. 50 pcs./ctn. 

• Painted Aluminum is Available in White (EW), Brown (BA), Clay (CL), Dark Bronze (DB), Desert Tan (DT), Sandstone 

Beige (SB) and 16 Oz. Copper (CP). 


Code Price 

JA50__ __ 

Starter Strip - Aluminum 500 ft. per ctn. - Galvanized Steel 250 ft. per ctn. 

Aluminum Soffit Cove Moulding - 25 per ctn. - 300 ft. per ctn. 

• Painted Aluminum is Available in White (W) and Royal Brown (B) and is .019. 

Code Price 

RCM__12 

Aluminum - 10' Galvanized Steel - 10' 


ALSS10 GLSS10 


ACCESSORIES 

.019 Aluminum 3/4 “J” Channel - 600 ft. per ctn. 


Code Price 

J-34WA 

• Galvanized Steel Starter Strip Does Not have Nail Holes or Slots 

Starter Strip - Aluminum 394 ft. per ctn. - 10' Galvanized Steel 250 ft. per ctn. - 

118" Galvanized Steel 197 ft. per ctn. 

• 10' Galvanized Steel Starter Strip Has Nail Holes or Slots 

Aluminum - 118" Galvanized Steel - 10' Galvanized Steel - 118" 


ALS118 GLSS10N GSS118 

Aluminum Utility Trim - 600 ft. per ctn. 


Code Price 

UT19WA 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 77 

7/07 

SOFFIT AND VENTILATION PRODUCTS

SOFFIT AND VENTILATION PRODUCTS 

ROLL LENGTH DIMENSION CODE PRICE 

20' roll 10 1/2" x 3/4" x 20' PMRV20 

50' roll 10 1/2" x 3/4" x 50' PMRV50 

Black UV Stabilized Polypropylene 

Code Price 

HPS5RV 

VENTILATION 

PRODUCTS 

Pro-Master Ridge Vent - 48'/ctn. 12 pcs./ctn. 

• Environmentally Friendly with Fibers that are 100% Natural. 

• No Maintenance or Operating Costs. 

• An Economic and Efficient Way to Ventilate your Attic with 15.2 Square Inches of Net Free Ventilation Area per Lineal Foot. 

• Easy to Install and Nail. 


• Meets Attic Ventilation Requirements of ALL Nationally Recognized Building Codes for Ventilation when Properly Installed with 

Soffit or Eave Vents. 

• Nails Included – Both Hand and Power. 

Pro-Master Highpoint Series 5 Ridge Vent - 48'/ctn. 12 pcs./ctn. 

• Pre-Formed Nail Holes & Self-Closing Ends. 

• 18 sq. in. per Lineal Foot of Net Free Ventilating Area. 

• Easy to Install & No Filters to Clog. 


• Raises Ridge Cap Less Than One Inch & Conforms to Varying Roof Pitches. 

• No Connectors, Straps or Gaskets Needed. 

Pro-Master Highpoint Series 7 Ridge Vent - 112'/ctn. 28 pcs./ctn. 

• Designed to Withstand Dramatic Temperature Changes, Resist Stress & Extreme Loads. 

• 9 sq. in. per Lineal Foot of Net Free Ventilating Area – No Filters to Clog. 

• Easy to Install – Gun Nailable Using Standard 1-3/4" Ring Shank Roofing Nails. 

• Self-Closing Ends – No Straps, Connectors or Gaskets Required. 

• Provides a Low Profile Economical Solution with a Height of .505 in. Under the Cap. 

• Vent has Internal Baffles & Exclusive External Angled Counter Baffles for Enhanced Flow. 

Black UV Stabilized Polypropylene 

Code Price 

HPS7RV 

Pro-Master Standard Box Vent - 10 pcs./ctn. 

• Made from Durable Scratch and Dent Resistant Polypropylene. 

• Three Pre-Punched Nail Holes for Easy Installation. 

• Net Free Vent Area: 50 sq. in.. 

• One Vent Needed for Every 52 sq. ft. of Attic Floor. 

• 10 Year Warranty. 

• Available in Weatherwood (WW), Black (BK), Brown (BR) and Grey (GR). 


UV Stabilized Polypropylene 

Code Price 

SBV5__ __ 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 78 

7/07

Classic 

Stair Kit 

Classic 

Line Kit 

Colonial 

Line Kit 

Colonial 

Stair Kit 

PRODECK 

VINYL RAILING SYSTEM 

ProDeck Vinyl Railing System Line Kits 

• 6', 8' and 10' Line Kits Include: Top & Bottom Rails, Required Number of Balusters or Spindles, Connector 

Screw Pack, Line Connector Set, Foot Block (8' &10' Line Sections) and Instructions. 

• Available in Two Styles: "Classic", Square Balusters and "Colonial", Turned Spindles 

• Available in White (0), Clay (3) and Sand (5). 


Classic Line Kit Colonial Line Kit 


6' Line 36" KB__L6-36 6' Line 36" KS__L6-36 






ProDeck Vinyl Railing System Stair Kits 

• 6' and 8' Stair Kits Include: Top & Bottom Rails, Required Number of Balusters or Spindles, Connector Screw Pack, Stair 

Connector Set, and Instructions. 



Classic Stair Kit Colonial Stair Kit 


6' Line 36" KB__S6-36 6' Line 36" KS__S6-36 

8' Line 36" KB__S8-36 8' Line 36" KS__S8-36 

ProDeck Vinyl Railing System Rails 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 79 

7/07 

VR 

- PRODUCTS DECKING 

• Top/Bottom Rail Sold as a Pair. 

• Line Rail is Available in 6', 8' and 10'. Line Rail for Glass Panel is Available in 6'. 

• Stair Rail is Available in 6' and 8'. 

6' Line/Stair 



Line Rail Stair Rail 


8' & 10' Line/Stair 

6' Line Rail (67.812") R__L36 6' Stair Rail (67.812") R__S36 

6' Line Rail for Glass Panel R__LP16 8' Stair Rail (91.812") R__S38 

8' Line Rail (91.812") R__L38 

10' Line Rail (120.25") R__L20 

6' Line for Glass Panels

DECKING PRODUCTS - VR 

Universal Post 

Colonial 

Gate Kit 

Colonial Post 

Classic 

Gate Kit 

ProDeck Vinyl Railing System Posts 

• Available in Two Styles: Universal Posts and Colonial Posts. 

• Universal Posts are Also Available as a 2 x 4 Half Post. 

• Colonial Posts are Also Available as a 5 x 5 Load Bearing Porch Post (5000 lb. Capacity). 

• Actual Post Lengths: 36" = 39" and 42" = 45". 

• 60" & 96" Universal Posts and 36" & 42" Colonial Posts Available in White Only. 



Universal Posts and Universal Half Posts Colonial Posts and Colonial Porch Post 


4 x 4 x 39 P__U36 4 x 4 x 36 P0C36 

4 x 4 x 45 P__U42 4 x 4 x 42 P0C42 

4 x 4 x 60 P0U60 5 x 5 x104 Porch P__PP1 

4 x 4 x 96 P0U96 

4 x 4 x 120 P__U120 

2 x 4 x 36 P__H36 

2 x 4 x 42 P__H42 

PRODECK 


ProDeck Vinyl Railing System Post Wraps 

• Includes Two 2-Piece Post Trims and Screws. 


Vinyl Post Wraps 


4 x 4 x 108 P__U36 

6 x 6 x 108 P__U42 

ProDeck Vinyl Railing System Gate Kits 

• Gate Kits are Available in Classic & Colonial Styles and Include: Hinges, Latches and All Fasteners. 

• Gate Kits are Pre-Assembled for 36" Opening, 36" High. 



Classic Gate Kit Colonial Gate Kit 


36" KG__B136 36" KG__S136 

ProDeck Vinyl Railing System "Square" Post Cap - 28 pcs./ctn. 



4 x 4 Vinyl Post Cap 

Code Price 

P__C14 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 80 

7/07

One-Piece 

Universal 

Porch 

PRODECK 


ProDeck Vinyl Railing System "New England" Post Cap - 15 pcs./ctn. 



ProDeck Vinyl Railing System "Solar Lighted" Post Cap - 4 pcs./ctn. 



Code Price 

P__C44 


Code Price 

P__C24 

ProDeck Vinyl Railing System "Ball" Post Cap - 12 pcs./ctn. 




Code Price 

P__C34 

ProDeck Vinyl Railing System Post Trims 

• Available in Three Styles: Universal (25 pcs./ctn.), One Piece (30 pcs./ctn.) and Porch Post Flare (40 pcs./ctn.). 

• Porch Post Flare Trim is Available in White Only. 

• Universal and One-Piece Post Trims areAvailable in White (0), Clay (3) and Sand (5). 


4 x 4 or 5 x 5 "Universal" Post Trim 4 x 4 "One Piece" Post Trim 5 x 5 "Porch" Post Flare Trim 


P__F1U R__PTF2 R0PPF1 

ProDeck Vinyl Railing System Baluster Kits (Classic Style) 

• Baluster Kits Include: One Connector Set and Screw Pack. 

• 6' Line Kits = 13 Balusters, 8' Line Kits = 18 Balusters, 10' Line Kits = 24 Balusters, 6' Stair Kits = 11 Balusters, 

and 8' Stair Kits = 13 Balusters. 



36" Line Baluster Kits 42" Line Baluster Kits 36" Stair Baluster Kits 


6' Line KB__R56-13 6' Line KB__R52-13 6' Stair KB__S56-11 

8' Line KB__R56-18 8' Line KB__R52-18 8' Stair KB__S56-15 

10' Line KB__R56-24 10' Line KB__R52-24 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 81 

7/07 

DECKING PRODUCTS - VR


Stair 

Connectors 

Line 

Connectors 

22-1/2 Degree Adapters 

45 Degree Adapters 

Round Adapters 

PRODECK 


ProDeck Vinyl Railing System Spindle Kits (Colonial Style) 

• Spindle Kits Include: One Connector Set and Screw Pack. 

• 6' Line Kits = 13 Spindles, 8' Line Kits = 18 Spindles, 10' Line Kits = 24 Spindles, 6' Stair Kits = 11 Spindles, 

and 8' Stair Kits = 13 Spindles. 



36" Line Spindle Kits 42" Line Spindle Kits 36" Stair Spindle Kits 


6' Line KS__R46-13 6' Line KS__R42-13 6' Stair KS__S46-11 

8' Line KS__R46-18 8' Line KS__R42-18 8' Stair KS__S46-15 

10' Line KS__R46-24 10' Line KS__R42-24 

ProDeck Vinyl Railing System Tempered Glass Panel - 1 pc./ctn. 

Tempered Glass Panel for 6' Line Rail 


36" PCL1636 

42" PCL1642 

ProDeck Vinyl Railing System Connectors 

• All Connectors are Sold as a Set of 4. 

• Line Connectors Packaged 14 sets/ctn. and Stair Connectors Packaged 8 sets/ctn.. 



Line Connectors Stair Connectors 


R__WB2 A__CS2 

ProDeck Vinyl Railing System Adapters - 6 sets/ctn. 

• 22-1/2 Degree Line Adapters Sold as a Set of 4, 45 Degree Line Adapters Sold as a Set of 2, Round Line Adapters Sold as a 

Set of 2, 3 Degree Stair Adapters Sold as a Set of 4 and Round Stair Adapters Sold as a Set of 2. 



Line Adapters Stair Adapters 

Type Code Price Type Code Price 

22-1/2 Degree A__AL1 3 Degree A__AS1 

45 Degree A__AL2 Round A__AS2 

Round A__AL3 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 82 

7/07

Aluminum Galv. Steel 

Stainless Steel 

Galv. Steel 

PRODECK 


ProDeck Vinyl Railing System Post Anchors 

• Aluminum Anchors Packaged 12 pcs./ctn. and Galvanized Steel Anchors Packaged 1 pc./ctn.. 

Aluminum Galvanized Steel 


P0SP1 P0SP4 

ProDeck Vinyl Railing System Anchor Hardware Kits 

• Stainless Steel Packaged 15 pcs./ctn. and Galvanized Steel Anchors Packaged 25 pc./ctn.. 

Stainless Steel for Concrete Galvanized Steel for Wood 


P0CA3 P0WA2 

ProDeck Vinyl Railing System Connector Bolt Packs - 15 pcs./ctn. 

1/4" x 3/4" Stainless Steel (Line) 1/4" x1" Stainless Steel (Stair) 


P0VA2 P0VA1 

ProDeck Vinyl Railing System Connector Screw Pack - 25 pcs./ctn. 

Screw Packs 

Code Price 

P0VA3 

ProDeck Vinyl Railing System ACQ Protective Gaskets - 10 pcs./ctn. 

Rubber Gasket 

Code Price 

P0WG1 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 83 

7/07 

DECKING PRODUCTS - VR


Inside 

Outside 

Inside 

Corner 

5 Degree 

32 Degree 

36 Degree 

Line 

Type Code Price 

Line R0HLB 

Inside Corner R0HIB 

PRODECK 


ProDeck Vinyl Railing System Continuous Handrail 

• Meets all Americans with Disabilities Act (ADA) and Building Code Requirements. 

• Provides Accessibility to Ramps, Stairwells and Staircases. 

• For Use in Residential & Commercial Applications. 

• Maintenance Free. 

• Guaranteed for Life. 

• 1 Line Bracket Required for Every 6 Feet of Handrail. 


Reinforced Handrail 

1-1/2" Dia. x 104" 

Code Price 

R0H15 

Elbows 


5 Degree R0HE5 



Corners 


Inside R0HIC 

Outside R0HOC 

P Loop 

Code Price 

R0HPL 

Return 

90 Degree 

Code Price 

R0HR90 

Brackets 

Adjustable 

End Caps (Pair) 

Mounting Block 

Code Price 

RCHMB 

Connectors 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Line 

Code Price 

R0HC 

Page 84 

7/07 


Adjustable RDHAC 

Line RDHLC

PRODECK COMPOSITE 

RAILING SYSTEM 

ProDeck Composite Railing System Level Kits 

• 6' and 8' Level Kits Include: 2 Top/Bottom 3-1/2" Rails, 14 Square Balusters and 30 Baluster Plugs (6' KIT), 19 Square Balusters 

and 40 Baluster Plugs (8' KIT), Hardware Pack, 1 Foot Block and Instructions. 

• All Dimensions are True Dimensions. 

• Elegance Series (Painted Wood Look) Available in Classic White (W), Adobe (A) and Tuxedo Black (K). 

• Natural Woods Series (Natural, Unpainted Look) Available in Gray Ash (G), California Redwood (R) and American Cedar (C). 


6' Level Kit 8' Level Kit 


36" PC__RAIL366 36" PC__RAIL368 

42" PC__RAIL426 42" PC__RAIL428 

ProDeck Composite Railing System 6' Stair Kits 

• 6' Stair Kits Include: 2 Top/Bottom 3-1/2" Rails, 14 Square Balusters and 30 Baluster Plugs, Hardware Pack, 1 Foot Block and 

Instructions. 

• All Dimensions are True Dimensions. 




6' Stair Kit 


36" PC__STR366 

42" PC__STR426 

ProDeck Composite Railing System Post Sleeves 

• All Posts are Sold Separately. 

• Fit Easily Over Existing 4 x 4 Posts. 




5 x 5 Post Sleeve 


44" PC__POST44 

108" PC__POST108 

ProDeck Composite Railing System Structural Post (optional) 

• Surface Mount 36". 

• Sold Individually - Required When No Structural Post Exists. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 85 

7/07 

CR 

- PRODUCTS 

5 x 5 Structural Post 

Code Price 

55TSM DECKING

DECKING PRODUCTS - CR 

"Plateau" 

"Pinnacle" 



ProDeck Composite Railing System "Standard" Post Cap 

• Sold Separately. 





Code Price 

PC55__STD 

ProDeck Composite Railing System "New England" Post Cap 






Code Price 

PC__CAP 

ProDeck Composite Railing System "Polished Copper" Post Cap 





5 x 5 Polished Copper/Vinyl Post Cap 

Code Price 

PC55__POL 

ProDeck Composite Railing System "Composite" Post Cap 

• Sold Separately. Only Available in the Natural Woods Series. 



5 x 5 Unpainted Post Cap 

Code Price 

PC__COMP 

ProDeck Composite Railing System Premium Post Cap 


• Only Available in the Elegance Series in 5 x 5 Powder Coated Aluminum. 



"Plateau" "Pinnacle" 


PC__FLAT PC__PINN 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 86 

7/07

"Light 

Plateau" 

New England 

45 

Degree 

"Light 

Pinnacle" 

Low Profile 

22-1/5 

Degree 



ProDeck Composite Railing System Premium Low Voltage Post Cap 





ProDeck Composite Railing System Premium Solar Post Cap 





"Solar Plateau" 

Code Price 

PC__FLATSL 

"Light Plateau" "Light Pinnacle" 


PC__FLATLT PC__PINNLT 

ProDeck Composite Railing System Post Trim 

• Sold Individually. (Low Profile Model is a 2 Piece Set) 




5 x 5 "New England" Post Trim 5 x 5 "Low Profile" Post Trim 


PC__TRIM PC__TRIM2 

ProDeck Composite Railing System Adapters (optional) 

• Sold as a 4 Piece Pack. 




22-1/2 Degree Adapter Set 45 Degree Adapter Set 


PC__225S PC__45S 

ProDeck Composite Railing System Hardware Pack (optional) 

• Pack Includes: 4 Rail Brackets and Trims with Stainless Steel Screws 




5 x 5 Level Hardware Pack 5 x 5 Stair Hardware Pack 


PC__LEVELHK PC__STAIRHK 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 87 

7/07 

DECKING PRODUCTS - CR

DECKING PRODUCTS 

DRYSNAP - UNDER DECK 

RAIN CARRYING SYSTEM 

DrySnap - Under Deck Rain Carrying System 

• Maximize Your Outdoor Living Space. 

• Vinyl Ceiling Panels Collect and Drain Water to Provide a Dry Space. 

• Provides a Maintenance Free Ceiling that Covers the Unsightly 

Underside of Your Deck . 

• Easy Snap-Together Installation Under Any Raised Deck. 

• All Weather Protection. 


Starter Piece - 12 pcs. per ctn. 

12' Starter Piece 16' Starter Piece 


37320 37321 

Vinyl Panel - 12' - 12 pcs. per ctn. 16' - 9 pcs. per ctn. 

12' Vinyl Panel 16' Vinyl Panel 


37324 37325 

Joist Bracket - 36 pcs. per ctn. 

2" x 24" 

Code Price 

37341 

Pitch Spacers - 32 pcs. per bag / 384 pcs. per ctn. 

1/4" x 2" x 2" 

Code Price 

37351 

Trim Cap - 14 pcs. per ctn. 

12' Trim Cap 

Code Price 

37331 

Stainless Steel Deck Screws - 50 pcs. per pack 

2 1/2" Screws 3" Screws 


84178 84179 

Gutter Screws & Ferrule (for Hanging Gutter) - 10 pcs. per ctn. 

6 1/2" Screws & Ferrule 

Code Price 

84181 

For FREE DrySnap Job Material Estimates or Technical Questions, Please Call Berger at (800) 523-8852. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 88 

7/07

Standard .019 Aluminum Trim Coil Colors - 50' Rolls 

SOLD IN CARTON QUANTITIES ONLY. 

• 12" Width = 2 Rolls per ctn. 

• 14" and 24" Widths = 1 Roll per ctn. 

WIDTH COLOR DESCRIPTION CODE PRICE 

14" Black / Lomar White 200-14 

24" Black / Lomar White 200-24 

7" Black / Royal Brown 202-07 



24" Light Bronze / Dark Bronze 800-24 

24" Dark Bronze / Lomar White 801-24 

12" Lomar White / Lomar White 100-12 



24" Musket Brown / Lomar White 700-24 

14" Royal Brown / Lomar White 201-14 

24" Royal Brown / Lomar White 201-24 

24" Black / Black 204-24 

24" Terratone Bronze / Lomar White 803-24 

Special .019 Aluminum Trim Coil Colors - 50' Rolls - 1 Roll per ctn. 


24" Ivory / Lomar White 105-24 

24" Barn Red / Lomar White CBR-24 

24" Window White / Window White NBW-24 

24" Clay / Lomar White BCL-24 

24" Desert Tan / Snow White DT-24 

24" Pewter Grey / Lomar White PG-24 

24" Grecian Green / Lomar White 203-24 

24" Prairie Sand / Lomar White CPS-24 

COIL PRODUCTS 


Standard .019 PVC Coated Aluminum Trim Coil Colors - 50' Rolls 


• All .019 PVC Coated Aluminum Trim Coil has a wash coat on reverse side of coil. 


24" White 500-24 

24" Musket Brown 501-24 

Standard .027 and .032 Aluminum Gutter Coil 


24" Snow White / Snow White SW-24 

24" Wolverine Almond / Lomar White 452-24 

24" Sandstone Beige / Lomar White SB-24 

24" Cream / 280 White CRM-24 

24" Ivy Green / 280 White IG-24 

24" Granite Grey / Lomar White GG-24 

24" Herringbone / 280 White HB-24 

SOLD IN SKID QUANTITIES ONLY. 3 Rolls per skid. Approximate Weight: 375 lbs. per roll 

• Available in High Gloss White, Low Gloss White and Royal Brown. 

Flashing and Trim Products Must Not be Used as Primary Roofing Materials. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 89 

7/07 

COIL PRODUCTS

COIL PRODUCTS 

Gauge .009 - Economy 

Gauge .0078 - Versa 

Follansbee Seamless Virotin Terne II - 50’ Rolls 

SIZE CODE PRICE 

14" girth IC4014 




COIL PRODUCTS 

Copper Gutter Coil - 1 Roll per Skid - Approx. 500 lbs. per Roll 

• Copper is 16 Oz. and is Sold in Full Skids Only. 


11 3/4" girth, 5K GC6CP1175 

11 7/8" girth, 5K GC6CP11875 

15" girth, 6K GC6CP15 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 90 

7/07 

• Virotin is Carbon Steel Coated with a Two Phase Zinc / Tin Alloy. 

• 28 Gauge Available in Full Skids Only. 

• Rolls are Coated Both Sides. 

• All Terne Coated Rolls are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks. Special Orders 

are Not Subject to Cancellation or Return. 

Mill Finished Aluminum Economy Valley Flashing - 50' Rolls 


6" MFEV06 

8" MFEV08 

10" MFEV10 

12" MFEV12 

14" MFEV14 

16" MFEV16 

20" MFEV20 

24" MFEV24 

Mill Finished Aluminum Versa Valley Flashing - 50' Rolls 


4" MFVR04 

6" MFVR06 

8" MFVR08 

10" MFVR10 

12" MFVR12 

14" MFVR14 

16" MFVR16 

18" MFVR18 

20" MFVR20 

24" MFVR24 

Flashing and Trim Products Must Not be Used as Primary Roofing Materials.

Gauge .014 - Standard 

30 Gauge - Standard 

26 Gauge - G90 

Gauge .0167 - Commercial 

Mill Finished Aluminum Standard Valley Flashing - 50' Rolls 


4" MFST04 

6" MFST06 

8" MFST08 

10" MFST10 

12" MFST12 

14" MFST14 

16" MFST16 

18" MFST18 

20" MFST20 

24" MFST24 

COIL PRODUCTS 

Galvanized Steel Standard Valley Flashing - 50' Rolls 


6" GLST06 

8" GLST08 

10" GLST10 

12" GLST12 

14" GLST14 

16" GLST16 

18" GLST18 

20" GLST20 

24" GLST24 

28" GLST28 

Galvanized Steel G90 Valley Flashing - 50' Rolls 

• 18" and 20" Premium Valley Flashings are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks. 




16" VGL-16 

18" VGL-18 

20" VGL-20 

Mill Finished Aluminum Commercial Valley Flashing - 50' Rolls 


14" MFCM14 

20" MFCM20 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 91 

7/07 

COIL PRODUCTS

COIL PRODUCTS 

COIL PRODUCTS 

16 Oz. Soft Copper Economy Valley Flashing Rolls - 100 lb. Rolls 

• 12" and 16" are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not 

Subject to Cancellation or Return. 

SIZE CODE PRICE APPROX. LENGTH 

12" CPEV12 100' 

16" CPEV16 75' 

20" CPEV20 60' 

24" CPEV24 50' 

Metal Bender Tool with 3 1/2" Blade - 12 pcs./ctn. 

• Die Cast Aluminum. 

Code Price 

M-BEND 

7" & 10" Blades for Metal Bender Tool - 12 cards/ctn. 

Code Price 

710-BLA 

16 Oz. Cold Rolled Copper Sheets 

SOLD IN SKID QUANTITIES ONLY. 3' x 8' Sheets have 80 Sheets/Skid or approx. 1920 lbs.. 3' x 10' Sheets have 65 

Sheets/Skid or approx. 2000 lbs.. 


3' x 8' PS1696 

3' x 10' PS16CP 


(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page 92 

7/07

TECHNICAL REFERENCE APPENDIX 

TECHNICAL REFERENCE 

APPENDIX 

Berger requires that all materials be evaluated for fitness of use by the user prior to application. Berger will not be 

responsible for misapplication of product, incorrect material or defects that were obvious at time of installation; 

consequential damage, schedule delays, labor and equipment rental. Our warranty is limited to our cost of material 

on product determined to be a manufactured defect. Claims for defective material damaged due to snow and/or ice 

loads are not covered by our warranty unless Berger snow guards have been utilized and installed per our installation 

instructions. For further information on proper use of these products please review this Technical Reference Appendix, 

the SMACNA Architectural Sheet Metal Manual 5th Edition or the AIA Architectural Graphic Standards 6th Edition. 

1. Metal Specifications A2 

a. Specifications for Coil & Sheet Metal Goods Used A2 

In The Production of Gutter & Downspout 

2. General Roof Drainage System Information A3-A11 

a. Proper Gutter and Downspout Sizing A3-A11 

b. Gutter Hanger Selection A10 

c. Recommended Gutter Hanger Spacing A10 

d. Recommended Gutter Position A10 

e. Lap Joint Specification A10 

f. Typical Gutter Hanger Details A11 

3. Related Technical Information A12-A15 

a. Galvanic Corrosion A12 

b. Expansion of Metals Used for Roof Drainage Systems A13 

c. Basic Soldering Terms and Techniques A13-A15 

d. Storage and Handling of Product A15 

e. Patina Chemical Sources A16 

The information included in this Appendix has been derived from The SMACNA Architectural Sheet Metal Manual 5th Edition and the AIA Architectural Graphic Standards 

6th Edition. For full copies of these industry manuals please contact: 

Sheet Metal and Air Conditioning Contractors National Association, Inc. (SMACNA) The American Institute of Architects (AIA) 

4201 Lafayette Center Drive, Chantilly, VA 22021 1735 New York Ave., NW, Washington, DC 20006 

Phone: (703) 803-2980 • Fax: (703) 803-3732 Phone: (800) AIA-3837 • Fax: (202) 626-7547 

Website: www.smacna.org • E-Mail: info@smacna.org Website: www.aia.org • E-mail: infocentral@aia.org 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A1 

7/07

SPECIFICATIONS FOR COIL & SHEET METAL GOODS USED 

IN THE PRODUCTION OF GUTTER & DOWNSPOUT 

1. Aluminum 

A. Mill Finished Aluminum 

i. Metal: ASTM B209 – Temper & Alloy 3105 H14 

ii. Finish: None 

B. Painted Aluminum 

i. Metal: ASTM B209 – Temper & Alloy 3105 H14 

ii. Finish: .65 - .70 Mil Thick Polyester Finish 

C. Kynar 500 ® Painted Aluminum 

i. Metal: ASTM B209 – Temper & Alloy 3003 / 3105 H14 

2. Steel 

ii. Finish: Contact Berger for Technical Data on Kynar 500 ® Coating 

A. Galvanized Steel 

i. Metal: ASTM A653 – LFQ (Lock Form Quality) 

ii. Finish: Hot Dipped Galvanized Zinc Coating 

B. Paintgrip Galvanized Steel 


ii. Finish: Hot Dipped Galvanized Zinc Coating with a Bonderized / Phosphatized Finish 

C. Painted Galvanized Steel 


ii. Finish: Hot Dipped Galvanized Zinc Coating with a .20 - .30 Mil Thick Epoxy and a .70 - .80 Mil Polyester Finish 

D. Stainless Steel 

i. Metal: 304 Alloy 

ii. Finish: 2B 

3. Copper 

A. Natural Copper 

i. Metal: ASTM B370 – CDA110 or CDA 122 Alloy – Cold Rolled 

ii. Finish: None 

B. Lead Coated Copper 

i. Metal: ASTM B101 – Class A Type 1 & Type 2 

ii. Finish: Lead Coating 

C. Revere Freedom Gray ® Zinc Coated Copper 


ii. Finish: Z – T Alloy (Zinc – Tin) 

D. Revere Ever Green ® Pre-Patinated Copper 


ii. Finish: Artificially Accelerated Crystalline Patina 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A2 

7/07 

TECHNICAL REFERENCE APPENDIX


DESIGN OF ROOF DRAINAGE SYSTEMS 

ROOF DRAINAGE 

PROPER GUTTER AND DOWNSPOUT SIZING 

The roof is one of the most essential parts of a building as it 

protects occupants, contents, and interior of the structure 

from the elements. Once an architect has determined the 

kind of roof he intends to use, he must give equal attention 

to the design of the roof drainage system. 

Factors to be considered in the design of roof drainage systems 

are the area to be drained, size of gutters, downspouts, 

outlets, slope of roof, type of building, and appearance. 

ROOF AREA TO BE CONSIDERED 

The design capacity for a roof drainage system depends on 

the quantity of water to be handled. The quantity of water in 

turn depends on the roof area, slope, and rainfall intensity. 

In considering the roof area, it must be remembered that 

rain does not necessarily fall vertically and that maximum 

conditions exist only when rain falls perpendicular to a surface. 

Since the roof area would increase as its pitch increases, 

then it would not be advisable to use the plan area of a pitched 

roof in the calculation of a drainage system. 

Experience has taught that use of the true area of a pitched 

roof often leads to oversizing of gutters, downspouts, and 

drains. To determine the design area for a pitched roof, Table 

1-1 is used. 

TABLE 1-1 

DESIGN AREAS FOR PITCHED ROOFS 

PITCH *B 

in./ft. mm/mm 

Level to 3 76/305 1.00 

4 to 5 102-127/305 1.05 

6 to 8 152-203/305 1.10 

9 to 11 229-279/305 1.20 

12 305/305 1.30 

* To determine the design area multiply the plan area by the factor in B column 

These areas are then divided by the proper factor given in 

Table 1-2, thus obtaining the required area in square inches 

(square mm) for each downspout. From Table 1-3 select the 

downspout. 

Page A3 

7/07 

RAINFALL INTENSITY - DOWNSPOUT CAPACITY 

Rainfall intensity is usually given in inches per hour for a 

five minute duration or one hour duration based on U.S. 

Weather Bureau records. Table 1-2 based on records 

through 1978, gives five minute intensities for selected 

cities. New Orleans, Los Angeles, for example, may have 

8 in./hr.(203 mm/hr) for a five minute duration yet record 

only 4.8 in. (121 mm) in an hour over a 100 year period. 

These rates correspond to 0.133 in./min.(3.4 mm/min.) 

and 0.08 in./min.(2 mm/min.). Local codes may require 

that drainage systems only be designed for the latter. It 

takes 96.15 square feet(8.93 square meters) of surface 

with 1 inch per hour(25 mm/hr) of water to correspond 

with 1 gpm (0.063 l/s) flow rate. Downspouts and gutters 

are sized in relation to rainfall on this basis. 

Plumbing codes typically use the vertically projected roof 

area for drainage design and they often use a square foot 

allowance per square inch of downspout for 1 in./hr.(25 

mm/hr) rainfall that varies with diameter, for example, 3 

in.(76 mm): 911(85); 4 in.(102 mm): 1100 (102); 5 

in.(127 mm): 1280 (119); 6 in.(152 mm): 1400 (130) and 

8 in.(203 mm): 1750 (163) sq. ft.(sq. m). Net drainage 

capacity from using Table 1-1 and 1-2 should be compared 

with local code requirements. 

DOWNSPOUT SIZING 

In sizing downspouts, the following considerations apply: 

1. Downspouts of less than 7.00 sq in.(4515 sq mm) 

cross section should not be used except for small areas 

such as porches and canopies. 

2. The size of the downspout should be constant throughout 

its length. 

3. Downspouts should be constructed with conductor 

heads every 40 ft(12.2 m) to admit air and prevent 

vacuum. 

4. Offset of more than 10 ft(3.0 m) can affect drainage 

capacity. 

5. The gutter outlet capacity should suit the downspout 

capacity. 

6. The downspout size must suit the bottom width of the 

gutter. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ALABAMA: Birmingham 

Mobile 

ALASKA: Fairbanks 

Juneau 

ARIZONA: Phoenix 

Tucson 

ARKANSAS: Bentonville 

Little Rock 

CALIFORNIA: Los Angeles 

Sacramento 

San Francisco 

San Diego 

COLORADO: Denver 

Boulder 

CONNECTICUT: Hartford 

DISTRICT OF COLUMBIA 

FLORIDA: Jacksonville 

Miami 

Tampa 

GEORGIA: Atlanta 

HAWAII: Honolulu 

Kahului 

Hilo 

Lihue 

IDAHO: Boise 

ILLINOIS: Chicago 

INDIANA: Indianapolis 

IOWA: Des Moines 

KANSAS: Wichita 

KENTUCKY: Louisville 

LOUISIANA: New Orleans 

MAINE: Portland 

MARYLAND: Baltimore 

MASSACHUSETTS: Boston 

MICHIGAN: Detroit 

MINNESOTA: Minneapolis 


TABLE 1-2 

RAINFALL DATA AND DRAINAGE FACTORS 

A B 

STORMS WHICH SHOULD BE STORMS WHICH SHOULD BE 

EXCEEDED ONLY ONCE IN EXCEEDED ONLY ONCE IN 

10 YEARS 100 YEARS 

Intensity lasting Calculated roof area Intensity lasting Calculated roof area 

5 minutes drained per 5 minutes drained per 

downspout area downspout area 

in/hr mm/hr sq/ft sq m/ in/hr mm/hr sq/ft sq m/ 

sq in 100 sq mm sq in 100 sq mm 

7.5 191 160 2.30 10.1 256 120 1.7 

8.2 208 150 2.10 10.8 274 110 1.6 

2.1 53 570 8.30 3.8 97 310 4.5 

1.7 43 700 10.10 2.3 57 530 7.60 

5.6 141 220 3.10 8.8 224 140 2.00 

6.1 155 200 2.80 9.1 232 130 1.90 

7.4 187 160 2.30 10.2 259 120 1.70 

7.4 187 160 2.30 10.0 253 120 1.70 

4.9 124 250 3.50 6.7 170 180 2.60 

2.5 64 480 6.90 3.9 100 310 4.40 

2.7 68 450 6.4 3.7 93 330 4.70 

2.2 57 540 7.80 3.1 78 390 5.60 

5.7 146 210 3.00 9.1 232 130 1.90 

6.4 164 190 2.70 9.4 238 130 1.80 

6.2 158 190 2.8 8.7 221 140 2.00 

7.1 180 170 2.4 9.7 247 120 1.80 

7.9 200 150 2.20 10.1 256 120 1.70 

7.7 195 160 2.20 9.8 250 120 1.80 

8.3 212 140 2.10 10.8 274 110 1.60 

7.3 186 160 2.4 9.9 251 120 1.70 

8.7 221 140 2.00 12.0 305 100 1.40 

7.0 177 170 2.50 12.0 305 100 1.40 

17.4 442 70 1.00 19.2 488 60 0.90 

10.4 265 110 1.70 14.4 366 80 1.20 

1.8 46 660 9.50 3.3 84 360 5.20 

6.8 172 180 2.60 9.3 236 130 1.90 

6.8 173 180 2.50 9.4 239 130 1.80 

7.3 186 160 2.40 10.3 262 120 1.70 

7.5 191 160 2.30 10.5 267 110 1.60 

6.9 175 170 2.50 9.4 238 130 1.80 

8.3 211 140 2.10 10.9 277 110 1.60 

5.4 136 220 3.20 7.6 192 160 2.30 

7.1 181 .170 2.40 9.7 247 120 1.80 

5.3 134 230 3.3 7.2 183 170 2.40 

6.4 162 190 2.70 8.9 226 140 1.90 

7.0 178 170 2.50 10.0 253 120 1.70 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A4 

7/07 



MISSOURI: Kansas City 

Saint Louis 

MONTANA: Helena 

Missoula 

NEBRASKA: Omaha 

NEVADA: Reno 

Las Vegas 

NEW JERSEY: Trenton 

NEW MEXICO: Albuquerque 

Santa Fe 

NEW YORK: Albany 

Buffalo 

New York City 

NORTH CAROLINA: Raleigh 

NORTH DAKOTA: Bismark 

OHIO: Cincinnati 

Cleveland 

OKLAHOMA: Oklahoma City 

OREGON: Baker 

Portland 

PENNSYLVANIA: Philadelphia 

Pittsburgh 

RHODE ISLAND: Providence 

SOUTH CAROLINA: Charleston 

TENNESSEE: Memphis 

Knoxville 

TEXAS: Fort Worth 

Dallas 

Houston 

San Antonio 

UTAH: Provo 

Salt Lake City 

VIRGINIA: Norfolk 

WASHINGTON: Seattle 

Spokane 

WEST VIRGINIA: Parkersburg 

WISCONSIN: Madison 

Milwaukee 

WYOMING: Cheyenne 


TABLE 1-2 

RAINFALL DATA AND DRAINAGE FACTORS (Continued) 

A B 

STORMS WHICH SHOULD BE STORMS WHICH SHOULD BE 

EXCEEDED ONLY ONCE IN EXCEEDED ONLY ONCE IN 

10 YEARS 100 YEARS 

Intensity lasting Calculated roof area Intensity lasting Calculated roof area 

5 minutes drained per 5 minutes drained per 

downspout area downspout area 

in/hr mm/hr sq/ft sq m/ in/hr mm/hr sq/ft sq m/ 

sq in 100 sq mm sq in 100 sq mm 

7.4 187 160 2.30 10.4 265 110 1.70 

7.1 181 170 2.40 9.9 251 120 1.70 

1.8 46 660 9.50 3.1 77 390 5.70 

1.8 46 660 9.50 2.4 61 500 7.20 

7.4 188 160 2.30 10.5 267 110 1.60 

2.3 57 530 7.60 4.5 114 270 3.90 

2.1 53 570 8.3 5.2 133 230 3.30 

6.7 170 180 2.60 9.3 236 130 1.90 

4.0 102 300 4.30 6.7 171 180 2.60 

4.5 115 270 3.80 6.4 169 180 2.60 

6.5 165 190 2.70 9.1 232 130 1.90 

6.0 152 200 2.90 8.4 213 140 2.10 

6.7 169 180 2.60 9.2 235 130 1.90 

7.3 185 160 2.40 9.8 250 120 1.80 

6.6 167 180 2.60 9.8 250 120 1.80 

6.8 172 180 2.50 9.3 236 130 1.90 

6.3 160 190 2.70 8.8 223 140 2.00 

7.6 193 160 2.30 10.5 267 110 1.60 

2.2 56 550 7.90 3.8 97 310 4.50 

2.1 53 570 8.30 3.0 76 400 5.80 

6.8 172 180 2.60 9.4 238 130 1.80 

6.4 163 190 2.70 8.8 224 140 2.00 

5.6 143 210 3.10 7.8 198 150 2.20 

7.2 184 170 2.40 9.4 238 130 1.80 

7.4 187 160 2.30 10.0 253 120 1.70 

6.7 169 180 2.60 9.0 229 130 1.90 

7.6 193 193 160 10.5 267 110 1.60 

7.6 194 160 2.30 10.5 267 110 1.60 

8.2 208 150 2.10 10.8 274 110 1.60 

7.6 193 160 2.30 10.5 267 110 1.60 

3.0 75 410 5.80 5.2 131 230 3.30 

2.8 71 430 6.20 4.3 108 280 4.10 

7.1 181 170 2.40 9.5 242 130 1.80 

2.1 53 570 8.30 3.3 84 360 5.20 

2.1 53 570 8.30 3.5 90 340 4.90 

6.6 168 180 2.60 9.1 230 130 1.90 

6.8 172 180 2.50 9.5 241 130 1.80 

6.6 168 180 2.60 9.1 232 130 1.90 

5.7 146 210 3.00 9.9 252 120 1.70 

These intensities are based on records and statistical projections. They may occasionally be exceeded either in the general area or at small areas within the designated city. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A5 

7/07


TYPE AREA “A” Nominal Actual 

Size Size 

Plain sq.in. sq.mm. sq.in sq.mm. in. mm. in. mm. 

Round 7.07 4560 5.94 3831 3 76 3 76 

12.57 810 11.04 7120 4 102 4 102 

19.63 12661 17.71 11422 5 127 5 127 

28.27 18234 25.95 16737 6 152 6 152 

50.24 32404 47.15 30411 8 203 8 203 

Corrugated 5.94 3831 3 76 3 76 

Round 11.04 7120 4 102 4 102 

17.72 11429 5 127 5 127 

25.97 16750 6 152 6 152 

Plain 3.94 2541 3.00 1935 2 51 1.75x225 44x57 

Rectangular 6.00 3870 4.80 3096 3 76 2x3 51x76 

12.00 7740 10.31 6649 4 102 3x4 76x102 

20.00 12900 15.75 10158 5 127 3.75x4.75 95x121 

24.00 15480 21.56 13906 6 152 4x6 102x152 

Rectangular 3.80 2451 3.00 1935 2 51 1.75x2.25 44x57 

Corrugated 7.73 4985 6.38 4155 3 76 2.37x3.25 60x83 

11.70 7621 10.00 6513 4 102 2.75x4.25 70x108 

18.75 12213 16.63 10832 5 127 3.75x5 95x127 

“A” = area of 1/4 in.(6.4 mm) undersized inlet See Figures 1-31 and 1-32 for gage 

7. Assuming that using the fewest number of downspouts 

is desirable, their locations will be affected by 

a. gutter capacity and length. To limit the effects of thermal 

expansion in gutters 50 ft(15.3 m) is a practical maximum 

length of gutter to be served by a downspout. Unless 

special provisions are made for flexibility in downspouts, 

gutters and their support systems, gutters should expand 

away from downspouts and downspouts should not be located 

near gutter expansion joints. See expansion coefficients 

in Appendix A-1 and expansion allowances in Figures 1-5 to 1-10. 

b. the capacity of the inlet tube. See Table 1-3 and Figure 

1-33. Also, a sharp bend at the inlet may clog. 

c. potential for water freezing in downspouts and gutters. 

Open, partially open or corrugated styles downspouts 

are suggested for areas subject to icing. Locating downspouts 

on the north side of buildings is not recommended 

for such areas. 

d. the appearance of the downspout system and a potential 

need for concealment. See Figures 1-31 and 1-32. 

e. the greater capacity of a pitched gutter. 

f. the downspout discharge location. Water disposal at 

this location should be acceptable. See Figures 1-31 and 1-36. 

g. the risk of gutter overflow from insufficient drainage 

capacity. See Figures 1-4, 1-21, and 1-23. 

h. a scupper serving a designated roof area. See Figures 

1-26 to 1-30. 

After the number and location of downspouts have been 

determined, the areas to be drained by each downspout 

TABLE 1-3 

DIMENSIONS OF STANDARD DOWNSPOUTS 

Page A6 

7/07 

should be figured. In making this calculation for a pitched 

roof, the plan area should be adjusted according to recommendations 

given on Table 1-1. 

SAMPLE PROBLEM: Select downspouts for a building in 

Boston, Mass. The building is 100 x 85 ft.(30.5 x 26 m) with 

a double pitched roof having a slope of 6 in./ft.(152 mm/m). 

The slope is toward the 100 ft.(30.5 m) side. Maximum rainfall 

conditions will be used to determine downspout size. 

It is decided to drain the building with 4 downspouts located 

at each corner of the building. An expansion joint will be 

installed in each gutter between the downspouts. 

The plan area of this building is 8500 sq ft.(790 sq m). Since 

the slope is 6 in./ft.(152 mm/m), factor 1.10 is used (Table 

1-1), making the design area 9350 sq ft.(868 sq m). Thus 

each of the four downspouts will serve a 2338 sq ft.(217 sq 

m) area. From column B, Table 1-2, opposite Boston, it is 

found that 1 sq in.(645 sq mm) of downspout will drain 170 

sq ft.(16 sq m) of roof area. Divide 2338(217) by 170(16) to 

determine that each downspout should have a minimum area 

of 13.56 sq in.(8746 sq mm). 

From Table 1-3, it is found that there is a choice of; a 5 in. 

(127 mm) Plain Round, a 5 in.(127 mm) Corrugated Round, 

a 5 in.(127 mm) Rectangular Corrugated, or 5 in.(127 mm) 

Plain Rectangular downspout. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 



GUTTER SIZING 


In sizing gutters, the following considerations apply for typical 

section lengths of 8 to 10 feet( 2.41 to 3.0 m): 

1. Spacing and size of outlet openings. (The gutter can never 

be any more effective than the outlet and downspout selected 

to drain it. Downspout sizes must not exceed the bottom 

width of the gutter.) 

2. Slope of the roof. (The gutter must be of such a design 

and location that water from a steep pitched roof will not by 

its own velocity tend to overrun the front edge.) 

3. Style of gutters to be used. (All gutters are not effective 

for their full depth and width, see Figures 1-1 and 1-4 for 

design data.) 

4. Maximum length of gutter. (50 ft.(15.2 m) between ends 

or expansion joints is the limit unless the system is especially 

designed to accommodate the greater expansion, the 

larger flow and the need for special supports.) 

5. Gutter support capability. (Supports should be based on 

full capacity of the gutter. Ice load capacity also affect the 

size and strength of the system.) 

Level gutters may be sized by Charts 1-1, 1-2, or 1-3. Sloped 

gutters may be sized by Chart 1-3. Formulae for flow in gutters 

with different pitch are not available. The capacity of a 

gutter with 1/16 in./ft.(5.21 mm/m) or less pitch is taken as 

that of a level gutter even though it is somewhat greater. 

RECTANGULAR GUTTER SIZING 

The size of rectangular gutters depends upon these 

factors: 

1. Area to be drained. (A, Chart 1-1) 

2. Rainfall intensity per hour. (I, Chart 1-1) 

3. Length of gutter in ft.(m) (L, Chart 1-1) 

4. Ratio of depth to width of gutter. (M, Chart 1-1) 

Chart 1-1 is based on level gutter capacity as experimentally 

determined by the National Institute of Standards and Technology 

(NIST) formerly National Bureau of Standards. It is 

plotted from W = 0.0106 M -4/7 L 3/28 (1A) 5/14 with W in feet(m). 

IRREGULAR CROSS SECTION GUTTER SIZING 

The required sizes of gutters other than rectangular or round 

can be determined by finding the semicircle or rectangular 

area that most closely fits the irregular cross section. 

HALF ROUND GUTTER SIZING 

Page A7 

7/07 

Chart 1-2 is based on level gutter capacity as determined by 

NIST. It is based on W = 0.0182 (lA) 2/5 . W is the width in 

in.(mm). I denotes rainfall intensity (Table 1-2) and A is the 

roof area in square feet(sq m) (Table 1-1). 

SAMPLE PROBLEM: To size rectangular gutter for a building 

120 x 30 ft.(35.6 x 9.1 m) located in Buffalo, NY. This 

building has a flat roof with a raised roof edge on three sides. 

A gutter is to be located on one of the 120 ft.(35.6 m) sides. 

So that each section of gutter will not exceed 50 ft.(15.2 m), 

three downspouts will be used with 2 gutter expansion joints. 

The area to be drained by each section of gutter will be 1200 

sq ft.(111.5 sq m), the rainfall intensity from Table 1-2, col A 

is 6 in/hr(152 mm/hr), the length of each gutter section is 

40 ft.(12.2 m), and the ratio of gutter depth to width is 0.75. 

On Chart 1-1 find the vertical line representing L = 40(12.2 

m). Proceed vertically along this line to its intersection with 

the oblique line representing M = 0.75. Pass to B vertically 

to the intersect the horizontal line representing IA = 

7200(16948). The point of intersection occurs between the 

oblique line representing gutter widths of 5 and 6 in.(127 

and 152 mm). The required width of gutter is, therefore, 6 

in.(152 mm) and its depth need be only 4.5 in.(114 mm).in. 

SAMPLE PROBLEM: To size a half round gutter for a building, 

located in Kansas City, Mo., with a flat roof 80 x 40 

ft.(24.4 x 12.2 m). This building has a parapet wall on three 

sides and a gutter to be located on an 80 ft.(24.4 m) side. 

Column A, Table 1-2, was used to determine rainfall conditions. 

Since the gutter run will exceed 50 ft.(15.2 m), two 

downspouts will be used with an expansion joint between. 

The area of the building is 3200 sq ft.(297 sq m). Thus each 

of the downspouts will serve an area of 1600 sq ft. (149 sq 

m). From column A, Table 1-2, opposite Kansas City, Mo., it 

is found that 1 sq in.(100 sq mm) of downspout will drain 

160 sq ft.(2.3 sq m/100 sq mm) of roof area. Divide 1600 sq 

ft.(149 sq m) by 160 sq ft/sq in.(2.3 sq m/100 sq mm) to 

determine that each downspout should have a minimum area 

of 10 sq in.(6470 sq mm). From Table 1-3 it is found that a4 

in.(102 mm) downspout is required. From Chart 1-2 it is 

determined that a 9.5 in.(241 mm) half round gutter should 

be used. Area and flow in Table 1-4 are based on 1 in.(25 

mm) of rainfall per hour; divide these areas by the local rainfall 

rate in inches per hour to determine the actual roof area 

to be served by the gutter diameter. “The capacity of a sloped 

rectangular gutter may be approximated by using a gutter 

cross section area not less than that of a semicircular gutter 

and a depth to width ratio of at least 0.75. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738


L = LENGTH OF GUTTER – FEET 

(SERVED BY A DOWNSPOUT) 

CHART 1-1 

WIDTH OF RECTANGULAR GUTTERS FOR GIVEN ROOF AREAS 

AND RAINFALL INTENSITIES 

50000 

40000 

30000 

20000 

15000 

10000 

7200 

5000 

4000 

3000 

2000 

1500 

IA = 1000 

L = 1000 

15 

20 

30 

40 

50 

60 

2" (51 mm) 

2.25 

2.50 

2.00 

3" (76 mm) 

1.75 

1.50 

WIDTH OF GUTTER 7" (178 mm) 

4" (102 mm) 

1.25 

5" (127 mm) 

6" (152 mm) 

0.90 

1.00 

M = DEPTH/WIDTH 

0.80 

0.70 

W = 11" (279 mm) 

10" (254 mm) 

9" (229 mm) 

8" (203 mm) 

0.60 

0.50 

117,983 

94,386 

70,789 

47,193 

35,395 

23,596 

16,989 

11,798 

9,439 

7,079 

4,719 

3,539 

2,359 

IA = RAINFALL INTENSITY x AREA (AREA FROM TABLE 1-1 THAT RELATES TO L) 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

M = D/W 

3.0 

4.6 

6.1 

9.1 

12.2 

15.2 

18.3 

L = LENGTH OF GUTTER – METERS 

Page A8 

7/07 



Rainfall Intensity (1) In. Per Hr. 


9.3 

12 

19 28 37 47 56 74 93 139 186 279 372 

305 

11 

279 

10 

254 

9 

229 

8 

7 

6 

5 

4 

CHART 1-2 

HALF ROUND GUTTER SELECTION 

Width required for given roof areas and rainfall intensities 

3 in. 

76.2 mm 

4 in. 

102 mm 

Roof Area (A) (Square M) 

5 in. 

127 mm 

3 

100 200 300 400 500 600 800 1000 1500 2000 3000 4000 

6 in. 

152 mm 

TABLE 1-4 

SLOPED ROOF GUTTERS 

Maximum Roof Area for Gutters 

Diameter of C.S. Area Level Level 1/8 in per ft slope 1/4 in per ft slope 

gutter (3.2 mm/.3 m) (6.4 mm/.3 m) 

in mm sq in sq mm sq ft sq m gpm l/s sq ft sq m gpm l/s sq ft sq m gpm l/s 

3 76 3.5 2258 680 63 7 0.44 960 89 10 0.63 1360 126 14 0.88 

4 102 6.3 4064 1440 134 15 0.95 2040 190 21 1.33 2880 268 30 2.08 

5 127 9.8 6321 2500 232 26 1.64 3520 327 37 2.33 5000 465 52 3.28 

6 152 14.1 9095 3840 357 40 2.52 5440 505 57 3.60 7680 713 80 5.05 

7 178 5520 513 57 3.60 7800 725 81 5.11 11040 1030 115 7.26 

8 203 25.1 16190 7960 739 83 5.24 11200 1040 116. 7.32 14400 1338 165 10.4 

10 254 39.1 25220 14400 1338 150 9.47 20400 1895 212 13.4 28800 2676 299 18.9 

7 in. 

178 mm 

Roof Area (A) (square feet) 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

8 in. 

203 mm 

9 in. 

229 mm 

10 in. 

254 mm 

14 in. 

356 mm 

13 in. 

330 mm 

12 in. 

305 mm 

11 in. 

279 mm 

15 in. 

381 mm 

203 

178 

152 

127 

102 

Rainfall Intensity (1) mm. Per Hr. 

Page A9 

7/07

GUTTER HANGER SELECTION 

In deciding which hanger style is most acceptable, please consider such things as appearance, expected life, ice 

loading, size of gutter, material and expansion. 

When fascia board is less than 2" thick, the hanger fasteners must be driven into the rafter ends. 

In areas subject to snow slide, coordinate the front edge elevation of the gutter with the extended roof line (see Table 

on Required Clearance of Gutter Below Extended Roof Line). 

RECOMMENDED GUTTER HANGER SPACING 

Gutter hangers should be spaced at a maximum of 36" on center. In areas where ice and snow are long lasting, hanger 

spacing should be reduced to 18" on center. 

RECOMMENDED GUTTER PITCH AND 

POSITION ON THE EAVE 

There are two factors that go into determining gutter position on the eave, the pitch of the gutter and the roof slope. 

Gutter should be pitched 1/16" or greater per foot for proper drainage. Gutter can be run level for appearance but 

addition downspout will be necessary (See section on Proper Gutter and Downspout Sizing). 

Gutters should be placed below the extended roof line so that snow and ice can slide clear. Steeper pitches require 

less clearance. 

Required Clearance of Gutter Below Extended Roof Line 

Roof Pitch Clearance Below Extended Roof Line 

0 in 12 – 2 in 12 1" 

3 in 12 – 5 in 12 3/4" 

6 in 12 – 8 in 12 1/2" 

9 in 12 or Greater 1/4" 

LAP JOINT SPECIFICATION 

Joints in gutters must be overlapped 1", riveted on 2" centers and soldered if the metal can be soldered (see soldering 

instructions for details). With metals that cannot be soldered, a compatible sealant must be continuously applied 

within a 1" lapped joint and the sealed lap must be riveted on 1" centers. All rivet applications must receive sealant 

after installation. Lapping joints in the direction of flow is preferred; gutter outlet connections may not fit this 

condition. 

PENETRATING WALL FASTENERS 

We recommend drilling holes in masonary and the use of metal hole inserts and/or epoxy sealant when installing 

these pipe hook fasteners. Wall penetrations need to be sealed to prevent water intrusion and related problems. 

Driving these into brick mortar joints will cause damage to the pipe hook fasteners and the wall. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A10 

7/07 



Cornice Mounted Shank and Circle - 

Roof Pitch of 8/12 or Greater will 

Require an Extension Shank* 

Extended Roof Line 

3/4" Clearance 

Circle 

#6 Shank 

Nut & Bolt 

Rafter Mounted Shank and Circle 

with Square Cut Rafter Tails* 



Circle 

#11 Shank 

Nut & Bolt 

Lock shank against 

dent on circle 

Roof Mount Shank and Circle with 

Recessed Fascia Board - Roof 

Pitch of 6/12 or Greater will 

Require an Extension Shank* 



Nuts & Bolts 

Circle 



TYPICAL GUTTER HANGER DETAILS 

12 



12 

6 

Fasteners 

12 

6 

Fasteners 

Wood 

Cornice 

Shank should be perpendicular 

to ground and parallel 

to building face 

6 

Fasteners 

#12 or #25 Shank 

(Angle may be carefully bent to 

accommodate roof pitch. Shank 

should be plumb to ground and 

parallel to the wall face. Do not heat.) 

Extension Shank 

(Shown in full extension - extension 

shank should be positioned as high 

up on the roof shank as possible 

while keeping the gutter below the 

extended roof line.) 

Fascia Mounted Shank Plate - 

Steep Roof Pitch or Small Fascia 

Board may Need #10 or #30 Shank* 



*Only 1 hole will line up with bolt Center distance on shank is 1/2". Center distance on circle is 3/8". This allows the gutter to be pitched by lowering the circle on the shank in increments of 1/8". Berger 

does not imply fitness of use of our components in conjunction with competitors products. Berger will not warrant any system that incorporates products not manufactured by Berger. 

Circle 

#1 Shank 

Plate 

Nut & Bolt 

Fascia Mount Shank and Circle with 

Angled Fascia Board - Roof Pitch of 

8/12 or Greater will Require an 

Extension Shank* 



Circle 



#30 Shank 

Nut & Bolt 



Fascia Mounted Shank with 6" Fascia 

Board - Roof Pitch of Greater than 

12/12 will Require an Extension 

Shank - Fascia Board of Less than 6" 

will Require Extension Shank* 

Circle 

#10 or #30 

Shank 

Nut & Bolt 

12 

12 

6 

Fasteners 

6 

Fasteners 

Page A11 

7/07 

Angled Fascia 

Board 

Shank should be perpendicular 

to ground and parallel 

to building face 

Fasteners 



12 

6" Fascia Board 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

12

GALVANIC CORROSION 

The selection of gutter material must account for the potential of Galvanic or Electrolytic Corrosion at contact points 

with other metals and at supports. Also, special selection is required for corrosive environments such as coastal or 

polluted industrial atmospheres. Galvanic or Electrolytic Corrosion can occur when dissimilar metals are in contact in 

the presence of an electrolyte. An electrolyte is any non-metal substance that will conduct an electric current, 

especially a liquid solution. Water, particularly rainwater, is a good electrolyte. 

A galvanic scale has been developed for metals. Metals that are more electropositive (anodic) will corrode more 

easily and metals that are more electronegative (cathodic) are more corrosion resistant. When two dissimilar metals 

are in contact in the presence of an electrolyte, the electropositive metal will corrode. The farther the two metals are 

from each other on the galvanic scale, the speed and effect of the reaction will increase. 

GALVANIC SCALE 

Electropositive / Anodic End 

Zinc 

Aluminum 

Galvanized Steel 

Cadmium 

Mild Steel, Wrought Iron 

Cast Iron 

Stainless Steel, types 304 and 316 (active) 

Tin - Lead Solder 

Lead 

Brass, Bronze 

Copper 

Stainless Steel, types 304 and 316 (passive) 

Electronegative / Cathodic End 

To reduce the tendency for galvanic corrosion to occur between dissimilar metals one or more of the following 

actions can be taken: 

1. Avoid contact between metals that are father apart on the scale. 

2. Do not couple a small exposed area of a more electropositive (anodic) metal with a large area of a more 

electropositive (cathodic) metal. Fasteners are a particular concern in this regard. 

3. Coat the electropositive (cathodic) metal with a suitable paint or other non-metallic coating (or coat both 

surfaces at their interface). Zinc chromate or bituminous coatings are often used. 

4. Separate the metals by tape, gasket, waterproof paper, elastomeric sheet, sealant or other non-absorbent, 

non-conductive material. 

5. Do not allow moisture runoff from a more electronegative (cathodic) metal to drain on a more electropositive 

(anodic) metal, even if the metals are not in contact. 

6. Remove metal particles that are deposited from steel dies on formed metals (or prevent the deposits from 

occurring). 

Miscellaneous Information about Galvanic Corrosion: 

1. Passivated stainless steel has been chemically cleaned, usually with an acid solution. 

2. Anodized aluminum is considered compatible with all other metals. 

3. Salts increase the electrical conductivity of water. 

4. The discharge from drain pipes on rooftop air-conditioning units can be very corrosive, particularly if the 

piping is copper and the drainage goes into galvanized steel scuppers, conductor heads or gutters. 

5. Copper nails / fasteners should not be used for fastening galvanized steel roof panels even though the contact 

area of the more electropositive (anodic) zinc coating is small compared to the more electronegative 

(cathodic) copper metal. Galvanized steel nails / fasteners will corrode rapidly if used on copper roofing. 

6. Many organizations and individuals have published corrosion tables. All of the tend to rank corrosion rates in 

non-quantitative terms such as mild, moderate and severe. Rates of corrosion are also affected by conditions 

such as seacoast, dry inland, acid rain and polluted industrial atmospheres. 

Additional information on galvanic corrosion prediction is found in ASTM Standard G82 and ASTM STP 576. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A12 

7/07 



EXPANSION OF METALS USED FOR ROOF DRAINAGE 

Increase in 50 ft Length of Material Due to an Increase in Temperature of 100° Fahrenheit 

Note: Material will decrease in length by the same distances due to a decrease in temperature of 100° Fahrenheit. 

Gutter Expansion: 

It is essential to provide expansion joints in all gutter installations to allow for movement due to temperature changes. 

In planning expansion joint locations, it must be recognized that an expansion joint acts as a dam in the gutter, 

therefore, the number and placement of downspouts will be influenced (see section on Proper Gutter and Downspout 

Sizing). 

No gutter length should exceed 50 ft without an expansion joint. Expansion joints should be installed to comply with 

the SMACNA Architectural Sheet Metal Manual 5th Edition page 1.16 to 1.17 – Allowances For Gutter Expansion. 

There are two types of expansion joints commonly used in gutter installation, Lap Type and Butt Type. Both of these 

types of expansion joints are easily fabricated on the jobsite using end caps and small amounts of sheet metal. 

Details for both Lap Type and Butt Type can be found in the SMACNA Architectural Sheet Metal Manual 5th Edition 

pages 1.18 to 1.21 – Lap Type Expansion Joint Figure 1-6 and Butt Type Expansion Joint Figure 1-7. 

BASIC SOLDERING TERMS AND TECHNIQUES 

The successful application of soldering requires several elements that include properly tinned coppers, application 

and type of flux, properly blended solder, type of soldering tip, correctly heated coppers, properly prepared metal 

surface free of oxidation and the skill of the person applying the solder. 

Common Terms 

Galvanized Steel Copper Stainless Steel Aluminum Zinc 

Increase (in inches) 13/32" 5/8" 5/8" 25/32" 1 1/32" 

Solder – Any of various fusible alloys, usually made of tin and lead, used to join metallic parts. 

Soldering – joining or uniting of two or more pieces of metal by means of an alloy, usually tin and lead, having a lower 

melting point than the pieces being joined. 

Soldering Coppers – an instrument for soldering, consisting of a bit or bolt of copper having a pointed or wedgeshaped 

end, and furnished with a handle. Soldering Coppers can have various shapes for different kinds of work. 

Tinning – covering the point of a soldering copper or other surface with solder. 

Flux – A substance applied to a surface to be joined by welding, soldering or brazing to facilitate the flowing of solder 

and prevent formation of oxides. 

Sal Ammoniac – another name for Ammonium Chloride (NH4Cl), is a white crystalline compound used as a soldering flux. 

Zinc Chloride – (ZnCl) A substance, also called cut or killed acid, which is unequalled as a flux when soldering galvanized 

steel, stainless steel and copper. It is colorless, odorless and corrosive; therefore it should be handled with care. 

Muriatic Acid – The commercial grade of Hydrochloric Acid (HCl), also called raw acid, which is used for making Zinc 

Chloride, used as a flux and for cleaning dirty parts of metal before they are soldered. It is colorless, has a sharp 

pungent odor and is corrosive; therefore it should be handled with care. 

Rosin – The by-product of oil of turpentine that is a common, non-corrosive type of flux for soldering copper. Rosin is 

usually found in powder or paste form. 

Oxide – A compound that is formed on the surface of a metal due to a reaction with the oxygen in the air. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A13 

7/07

Preparation 

Filing and Tinning Soldering Coppers 

Unless the soldering copper is properly tinned, a good soldering job is impossible. Tinning keeps scale and 

corrosion from forming on the soldering copper point that acts as insulation, allows the solder to flow properly 

from the point to the metal, and keeps dirt and scale out of both the solder and the seam. For best results, use a 

50% Tin – 50% Lead solder. 

1. Heat the copper to a cherry red and place it in a vise. Using a coarse file, remove pits and old tinning. 

Then using a finer file, smooth off the rough edges of the corners of the point. 

2. Reheat the copper enough to melt the solder. Apply a small portion of solder to the tip and rub the tip 

lightly back and forth on a block of Sal Ammoniac. If the solder does not adhere to the point, it is 

because the soldering copper is not hot enough. Do not inhale the white smoke that should rise from 

the Sal Ammoniac block. It is a toxic gas and should not be breathed. 

3. The solder copper should be neither overheated nor under heated during the tinning operation. If the 

copper is too hot, the tin will burn off as fast as it is applied. If it is too cold, the solder will not adhere 

to the copper. 

Clean All Surfaces of Oxides, Dirt, Grease, and Other Foreign Matter 

Unless the metal that is being soldered is clean, neither the solder nor the flux will adhere to the surface if the 

metal. 

Applying the Soldering Flux 

Applying the flux is important. Carelessness in its application will ruin the entire solder procedure. 

Soldering 

BASIC SOLDERING TERMS AND TECHNIQUES 

1. Liquid Fluxes are applied with a small brush. Dip the brush and spread it lightly on the area to be 

soldered. Do not apply flux anywhere except where the soldering is to be done. 

2. Powdered flux, such as rosin may be sprinkled onto the surface to be soldered or it can be melted on to 

the metal with a hot copper. Do not apply flux anywhere except where the soldering is to be done. 

3. Flux will absorb moisture, which weakens its capability. Be sure to use fresh flux that has not been 

diluted. 

Position of the Soldering Copper 

The position of the soldering copper is important as it is applied to the parent metal because it heats the metal to 

the melting point of solder and it keeps the solder in a liquid state while soldering. 

1. It is important that as much of the point of the copper is resting on the metal as possible to allow 

maximum heat transfer from the tip to the metal. Most of the heat is in the body and the base of the 

point of the soldering copper – not in the tip. 

2. Since melted solders flow to the hottest point of the metal, have the base of the soldering copper in 

contact with the area in which the solder is to flow. When soldering a seam, allow the soldering copper 

to heat the seam itself so solder will flow into the seam for a watertight seal. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A14 

7/07 



BASIC SOLDERING TERMS AND TECHNIQUES / 

STORAGE AND HANDLING OF PRODUCT 

Soldering Different Types of Metal 

Different techniques and materials are needed to effectively solder different types of metal. 

1. Galvanized Steel 

a. If the galvanized steel is bright and clear, use Zinc Chloride as a flux to make a well-bonded joint. 

b. If the galvanized steel is dull and dirty, use Muriatic Acid as a flux to allow the solder to bond. 

c. For best results, use a 50% Tin – 50% Lead solder. 

d. All flux should be washed off of the metal after soldering is complete. 

e. There are many commercially marketed fluxes for soldering galvanized steel. 

2. Copper 

a. If the surface of the copper is free of oxide, it can be easily soldered using Zinc Chloride as a flux. 

b. If the copper is dull, apply Muriatic Acid directly to the metal with an acid brush to clean the 

surface. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chloride 

as a flux. 

c. For best results, use a 50% Tin – 50% Lead solder. 

d. All flux should be washed off of the metal after soldering is complete. 

e. There are many commercially marketed fluxes for soldering copper. 

3. Stainless Steel 

a. Apply Muriatic Acid directly to the metal with an acid brush to clean the surface. 

b. Leave the acid on the surface of the metal for the required time (this varies with the type of 

stainless steel and the strength of the acid). 

c. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chloride as a flux. 

d. For best results, use a 50% Tin – 50% Lead solder. 

e. All flux should be washed off of the metal after soldering is complete. 

f. There are many commercially marketed fluxes for soldering stainless steel. 

STORAGE AND HANDLING OF PRODUCT 

Berger products must be stored in a properly ventilated, dry environment to prevent condensation on metal surfaces. 

Materials that are stored in areas subject to temperature variations, outside storage or subjected to moisture damage 

are not returnable. Galvanized Steel and Zinc surfaces are susceptible to humid storage stain or white rust. SMACNA 

guidelines for storage and handling of materials apply. Refer to SMACNA appendix A-5 sections 1.7, 1.8, 1.9. 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A15 

7/07

PATINA CHEMICAL SOURCES 

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738 

Page A16 

7/07 

Copper will Patina naturally in most areas within 7 years when exposed to normal air quality and moisture. Areas that are dry or 

at high altitudes will take longer or not react to environmental surface oxidation. 

Berger Building Products, Inc provides this information as a service with the understanding that the results of the chemical 

patina will vary and Berger assumes no liability. 

Berger cautions the user that the user is responsible for the results. The user also must comply with all manufacturer safety 

recommendations on handling and disposing of chemicals in accordance with all Local, State and Federal EPA Guidelines. 

User can check for other sources on the internet, phone and industrial directories. 

Triple-S Chemical Products, Inc 

Los Angeles 

800-862-5958 

Patina Solutions 

800-882-7004 

Jax Chemical Co 

Floral Park, NY 

718-347-0057 

The Copper Development Association (CDA) provides information on the use of copper for every purpose known to man at the 

website: 

http://www.copper.org 

For specific information on architectural copper finishes go directly to: 

http://www.copper.org/applications/architecture/finishes.html

Table Of Contents

Create successful ePaper yourself

Table Of Contents

Create successful ePaper yourself

Delete template?

Save as template?