+44 (0) - Holden Vintage and Classic Car Parts
+44 (0) - Holden Vintage and Classic Car Parts
+44 (0) - Holden Vintage and Classic Car Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
£2.00<br />
Dec 08
2<br />
HARDWARE<br />
Welcome to the hardware section of the 9th edition of the<br />
<strong>Holden</strong> <strong>Vintage</strong> & <strong>Classic</strong> motoring catalogue. Unlike the<br />
8th edition, printed back in Spring 2002, we have split the<br />
new catalogue into 4 sections, as our website. We are<br />
working to complete the remaining sections by the summer.<br />
At <strong>Holden</strong> <strong>Vintage</strong> & <strong>Classic</strong> we are classic motoring<br />
enthusiasts <strong>and</strong> are always happy to give advice on parts<br />
(including our speciality Lucas electrical) or classic rallying,<br />
so please don’t hesitate to get in touch with us for technical<br />
information or assistance.<br />
ELECTRICAL<br />
• Batteries<br />
• Bulbs & Warning Lamps<br />
• Control Boxes<br />
• Heaters & Electrical Fans<br />
• Horns & Spares<br />
• Ignition<br />
• Lighting<br />
• Switches<br />
• Wiring<br />
INTRODUCTION<br />
SHOP OPENING TIMES<br />
We also have a shop at Bromyard, so if you live nearby, or<br />
are in the area, please call in between:<br />
Adhesive seals 74<br />
Aero filler caps 15<br />
Aero screens & side screens 63<br />
Air filters 16 - 17<br />
Ammeters 31<br />
Ash trays 61<br />
Badge bars, badges & mascot 63<br />
Badges transfers & stickers 62<br />
Billet horn pushes & caps 56<br />
Bonnet accessories 69<br />
Bonnet catches, hooks & pins 68<br />
Boot racks 64 -66<br />
Boot stays 72<br />
Boot/bonnet h<strong>and</strong>les 71<br />
Bowl type fuel filters 9 - 10<br />
<strong>Car</strong>burettor accessories 11<br />
<strong>Car</strong>pet fasteners 77<br />
Clocks 27<br />
Compasses 60<br />
Copper pipe & solderless fittings 12<br />
Dellorto accessories 13<br />
Durable dot fasteners 77<br />
Dzus fasteners 77<br />
Eclipse gauges 28 & 31<br />
Edge trims 74<br />
Exterior h<strong>and</strong>les 71<br />
Facet fuel pumps 8<br />
Filler caps 14 & 15<br />
Fittings for Facet pumps 8<br />
HARDWARE<br />
• Accessories<br />
• Body Hardware<br />
• Fittings<br />
• Fuel Pumps & Systems<br />
• Gauges<br />
• Mirrors<br />
• Seats & Seat Belts<br />
• Steering Wheels<br />
• Washers & Wipers<br />
INDEX<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
<strong>Holden</strong> <strong>Vintage</strong> & <strong>Classic</strong> mail order company was<br />
established in November 1988. Now located in Bromyard in<br />
Herefordshire, Engl<strong>and</strong>, the company has developed in<br />
parallel with the worldwide interest in period motoring.<br />
The company started as Lucas electrical specialists for<br />
which we are renowned. Luckily some original tooling is still<br />
available, <strong>and</strong> in other instances we have commissioned<br />
new tooling to allow manufacture of otherwise unobtainable<br />
parts. The product range has been widened to cover many<br />
other items including clothing, accessories, media & tools.<br />
MAINTENANCE<br />
• <strong>Car</strong>e & Storage<br />
• Disposable Filters<br />
• Lifts/Jacks/Axle St<strong>and</strong>s<br />
• Oil, Grease & Fluids<br />
• Paint & Anti-Rust<br />
• Safety & Hygiene<br />
• Tools<br />
Fuel hose & fittings 11<br />
Fuel taps 10<br />
GB Plates 62<br />
Gear lever knobs 61<br />
Glazing channels 73<br />
Grab h<strong>and</strong>les 71<br />
Hard tops 67<br />
Harness accessories 50<br />
Harnesses 50<br />
Heat control 78 & 79<br />
Hinges 72<br />
In line fuel filters 10<br />
Interior h<strong>and</strong>les & door pull 70<br />
Latches & catches 72<br />
Leather bonnet straps 69<br />
Licence holders 60<br />
Lift the dot fasteners 76<br />
Luggage straps 66<br />
Mirrors 42 - 47<br />
Motorcycle Accessories 59<br />
Number plates 66<br />
Petrol Tank Products 59<br />
Petrol Taps 12<br />
Rocker covers 60<br />
Scottoil 58<br />
Seals 73<br />
Seat belts 51<br />
Seat runners 49<br />
Seats 48 - 49<br />
ABOUT THE COMPANY<br />
9.00am - 5.00pm Monday to Friday<br />
9.30am - 12 noon Saturday<br />
(not open on bank holiday weekends)<br />
CLOTHING & GIFTS<br />
• Gloves<br />
• Goggles<br />
• Hats & Helmets<br />
• Jackets & Coats<br />
• Leisure Clothing<br />
• Auto Gifts<br />
• Books, CDs & DVDs<br />
• Maps & Atlases<br />
• Picnic Accessories<br />
Shock absorbers 57<br />
Smiths gauges 22 - 35<br />
Steering wheel bosses 54 - 56<br />
Steering wheels 52 - 54 & 56<br />
SU accessories 6 & 7<br />
SU carburettor 6 - 5 & 13<br />
SU fuel pumps 3 - 5 & 7<br />
Sun visors 63<br />
Sundries 73<br />
T<strong>and</strong>em wiper arms: collet fixing 38<br />
Telemetrix gauges 29 & 31<br />
Tenax fasteners 76<br />
Thermometers 27<br />
Tube & leaf’ seals 75<br />
Turnbuckles 77<br />
Twin SU fuel pumps 4<br />
Vacuum gauges 34 & 58<br />
Waist seals 74<br />
Washer bottle stickers 36<br />
Washer bottles 37<br />
Washer jets 36<br />
Washer pumps 36<br />
Weber accessories 13<br />
Wheel spinners 67<br />
Wheelboxes 39 - 40<br />
Wing piping 73<br />
Wiper Arms 40 & 41<br />
Wiper blades 41<br />
Wiper motors 38 - 39
Website open 24hrs every day<br />
www.holden.co.uk<br />
SU FUEL PUMPS<br />
FUEL<br />
SU Fuel Pumps have always had an arrangement of contact breaker points to switch the current <strong>and</strong><br />
initiate the pumping action. This is the clicking noise you can hear which tells you that your pump is working.<br />
The SU system of points is very reliable <strong>and</strong> long lasting, but eventually problems can occur with burnt<br />
or dirty points. We are still able to supply new pumps to the original ‘pointed’ design which are not polarity<br />
conscious, but in addition are also able to supply SU pumps without points.<br />
These ‘pointless’ pumps are actuated by means of an electronic switch <strong>and</strong> a solid state timing control device<br />
which overcomes the problems with points <strong>and</strong> ensures that your pump will work every time, even after a long winter layup.<br />
The electronic system is patented <strong>and</strong> the ‘pointless’ pumps are externally identical to their ‘pointed’ counterparts <strong>and</strong><br />
the characteristic ticking has been retained, so you still know yours is working! In addition we offer DIY Conversion Kits<br />
complete with electronic circuit board <strong>and</strong> fittings to enable existing pumps to be modified to electronic actuation if required.<br />
The ‘pointless’ pumps are polarity conscious, which means that you have to order appropriate to your car.<br />
AZX PUSHING PUMP<br />
Ref AZX1331. Fit near tank, 12 volt,<br />
15 galls/hour at 2.7 p.s.i. As fitted to<br />
MGA, Austin Healey 100 four<br />
cylinder<br />
‘Pointed’ type 015.077<br />
£81.95 each | £71.26 ex VAT<br />
‘Pointless’ negative earth 015.444<br />
£90.13 each | £78.37 ex VAT<br />
‘Pointless’ positive earth 015.445<br />
£90.13 each | £78.37 ex VAT<br />
AUF PUSHING PUMP<br />
Ref AUF214. 12 volt, 7 galls/hour. As<br />
fitted to A40, Mini, 1100, 1300, Austin<br />
Healey Sprite, Midget<br />
‘Pointed’ type 015.065<br />
£63.25 each | £55.00 ex VAT<br />
‘Pointless’ negative earth 015.458<br />
£71.30 each | £62.00 ex VAT<br />
‘Pointless’ positive earth 015.459<br />
£71.30 each | £62.00 ex VAT<br />
Plastic Terminal Knob for SU fuel<br />
pumps. The finishing touch to your<br />
installation 015.071<br />
£3.61 each | £3.14 ex VAT<br />
AZX PUSHING PUMP<br />
Ref AZX1307. Fit near tank, 12 volt, 15<br />
galls/hour at 2.7 p.s.i. As fitted to<br />
MGB. Has breather pipe<br />
‘Pointed’ type 015.290<br />
£81.95 each | £71.26 ex VAT<br />
‘Pointless’ negative earth 015.446<br />
£90.13 each | £78.37 ex VAT<br />
‘Pointless’ positive earth 015.447<br />
£90.13 each | £78.37 ex VAT<br />
AZX PUSHING PUMP<br />
Ref AZX1308. 12 volt, As fitted to<br />
Jaguar from 1959 on. No breather<br />
pipe<br />
‘Pointed’ type 015.063<br />
£81.95 each | £71.26 ex VAT<br />
‘Pointless’ negative earth 015.448<br />
£90.13 each | £78.37 ex VAT<br />
‘Pointless’ negative earth 015.449<br />
£90.13 each | £78.37 ex VAT<br />
LCS PUSHING PUMP LCS PUSHING PUMP<br />
Ref AUA157–flat topped end cap with<br />
no condenser as used from 1948 to<br />
1968. 12 volt. 12.5 galls/hour. As fitted<br />
to Jaguar XK120 & XK140<br />
‘Pointed’ type 015.069<br />
£141.78 each | £123.29 ex VAT<br />
‘Pointless’ negative earth 015.440<br />
£155.86 each | £135.53 ex VAT<br />
‘Pointless’ positive earth 015.441<br />
£155.86 each | £135.53 ex VAT<br />
Ref AUA152–stepped end cap with<br />
condenser/diode as used from 1958 to<br />
1963. 12 volt. 12.5 galls/hour. As fitted<br />
to MGA Twin Cam<br />
‘Pointed’ type 015.068<br />
£141.78 each | £123.29 ex VAT<br />
‘Pointless’ negative earth 015.442<br />
£155.86 each | £135.53 ex VAT<br />
‘Pointless’ positive earth 015.443<br />
£155.86 each | £135.53 ex VAT<br />
Wrap this ‘SU GUARANTEED FACTORY REPLACEMENT UNIT’ Sticker around<br />
your pump for that authentic underbonnet look! 015.526<br />
£1.73 each | £1.50 ex VAT<br />
3
4<br />
FUEL<br />
6 volt LP type, ref AUA26–fits near<br />
engine, suction type, will pump 8<br />
galls/hour at 1.5 p.s.i. ‘Pointed’ type.<br />
As fitted to Morris 8. If your 6 volt<br />
pump is struggling to supply enough<br />
fuel <strong>and</strong> you are having to bang on the<br />
bulkhead to keep it going, this is your<br />
opportunity to get a new pump!<br />
015.060<br />
£86.25 each | £75.00 ex VAT<br />
Ref AUA26/B. Bronze body version of<br />
015.060 above 015.074<br />
£129.64 each | £112.73 ex VAT<br />
AUA SUCTION PUMP<br />
Ref AUA8. 12 volt. This is the pump<br />
fitted to all Derby Bentleys. It comes<br />
complete with the special cast alloy<br />
body with the base at an angle ready<br />
to sit on the cast alloy bulkhead <strong>and</strong><br />
connect up directly to the car’s metal<br />
fuel pipe<br />
Pointed’ type 015.292<br />
£253.72 each | £220.63 ex VAT<br />
‘Pointless’ negative earth 015.463<br />
£264.59 each | £230.08 ex VAT<br />
‘Pointless’ positive earth 015.464<br />
£264.59 each | £230.08 ex VAT<br />
AZX PUSHING PUMP<br />
ALP type, ref AUA25, 12 volt, 8<br />
galls/hour at 1.5 p.s.i. Fits near<br />
engine. Screw on fittings.<br />
‘Pointed’ type 015.073<br />
£80.95 each | £70.39 ex VAT<br />
‘Pointless’ negative earth 015.456<br />
£89.40 each | £77.74 ex VAT<br />
‘Pointless’ positive earth 015.457<br />
£89.40 each | £77.74 ex VAT<br />
Ref AUA25B. Bronze body version of<br />
015.073 above. As fitted to MG/Morris<br />
1934–1948 015.076<br />
£129.64 each | £112.73 ex VAT<br />
AUA SUCTION PUMP<br />
Ref AZX1405/AZX1416. 12 volts, both ends pump at the<br />
same time, 30 galls/hour at 2.7 p.s.i. As fitted to Aston<br />
Martin post 1964, Rolls-Royce Silver Shadow & Bentley<br />
T Type<br />
‘Pointed’ type 015.059 £201.25 each | £175.00 ex VAT<br />
‘Pointless’ negative earth<br />
015.469 £221.38 each | £192.50 ex VAT<br />
‘Pointless’ positive earth<br />
015.472 £216.27 each | £188.06 ex VAT<br />
SU FUEL PUMPS<br />
TWIN SU FUEL PUMPS<br />
Ref AUA11. Suction type, fitted to<br />
Aston Martin DBs 2.6 & 3 litre, 1951-<br />
58<br />
‘Pointed’ type 015.293<br />
£231.98 each | £201.72 ex VAT<br />
‘Pointless’ negative earth 015.465<br />
£240.43 each | £209.07 ex VAT<br />
‘Pointless’ positive earth 015.466<br />
£240.43 each | £209.07 ex VAT<br />
A special ‘pull type’ pump for larger<br />
engines with 6 volt electrics. ‘Pointed’<br />
type 015.293/6V<br />
£237.02 each | £201.72 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
AUA SUCTION PUMP AUA SUCTION PUMP<br />
AUA SUCTION PUMP<br />
AZX PUSHING PUMP<br />
Ref AUA66. 12 volt. 8 galls/hour at 1.5<br />
p.s.i. Fits near engine. As fitted to<br />
Morris Minor 1000, L<strong>and</strong> Rover <strong>and</strong><br />
many others. The inlet has a solid pipe<br />
connection, the outlet requires a pushon<br />
pipe of 1 ⁄4 in internal diameter<br />
‘Pointed’ type 015.061<br />
£86.25 each | £75.00 ex VAT<br />
‘Pointless’ negative earth 015.452<br />
£94.88 each | £82.50 ex VAT<br />
‘Pointless’ positive earth 015.453<br />
£94.88 each | £82.50 ex VAT<br />
AUA PUSHING PUMP<br />
Ref AUA161. Suction type, fitted to<br />
Aston Martin 3.7 litre, 1958-64. This<br />
pump produces a high flow at a<br />
relatively low output pressure<br />
‘Pointed’ type 015.294<br />
£231.98 each | £201.72 ex VAT<br />
‘Pointless’ negative earth 015.467<br />
£240.43 each | £209.07 ex VAT<br />
‘Pointless’ positive earth 015.468<br />
£240.43 each | £209.07 ex VAT<br />
Ref AZX1501. 12 volts, each end pumps separately to<br />
provide a main supply <strong>and</strong> a reserve. As fitted to Rover P5.<br />
12.5 galls/hour at 2.7 p.s.i.<br />
‘Pointed’ type 015.079 £238.10 each | £207.04 ex VAT<br />
‘Pointless’ negative earth<br />
015.473 £261.90 each | £227.74 ex VAT
Website open 24hrs every day<br />
www.holden.co.uk FUEL<br />
LCS<br />
Set of spare points for SU Pumps<br />
015.088<br />
£18.03 each | £15.68 ex VAT<br />
These include the diaphragm, armature spring, centering plates, rocker<br />
mechanism, pivot pin, contact blade, filter,inlet <strong>and</strong> outlet valves, washer <strong>and</strong><br />
gasket, <strong>and</strong> come with full instructions:<br />
For the earlier long housing (3”) LCS<br />
fuel pumps, for example AUA52<br />
(shown) 015.086<br />
£63.10 each | £54.87 ex VAT<br />
For short housing (2 3 ⁄8”) LCS fuel<br />
pumps, for example AUA152 <strong>and</strong><br />
015.068 015.085<br />
£52.91 each | £46.01 ex VAT<br />
SU FUEL PUMPS SPARES<br />
AZX<br />
Push-on Connection Kit for 5 Fitting Kit for all six LCS pump types, Union for AZX Type Pumps. Please<br />
⁄16” hose on<br />
contains 2 studs, 2 nipples, <strong>and</strong> 2 note that if you order one of these AZX Type Pumps 015.299<br />
tube nuts, suits 3⁄8” outside diameter pumps these unions are not fitted. If<br />
£6.33 each | £5.50 ex VAT<br />
copper pipe 015.070 required you will need to order them<br />
£19.52 each | £16.97 ex VAT separately 015.238<br />
£11.49 each | £9.99 ex VAT<br />
AUA AUA AUA<br />
Alternative Union for AUA type pumps<br />
015.060 to 015.062 015.230<br />
£11.49 each | £9.99 ex VAT<br />
Elbow kit, including nut & olive, use<br />
with 015.230 shown left 015.231<br />
£8.58 each | £7.46 ex VAT<br />
SU FUEL PUMP REBUILD KITS<br />
For pre 1985 LP type fuel pumps<br />
015.080<br />
£36.80 each | £32.00 ex VAT<br />
For post 1985 LP type fuel pumps<br />
<strong>and</strong> 015.060 <strong>and</strong> 015.061 (shown)<br />
015.081<br />
£36.80 each | £32.00 ex VAT<br />
AZX<br />
Push-on connection for 1 ⁄4” hose on<br />
AUA type pumps 015.239<br />
£8.58 each | £7.46 ex VAT<br />
Electronic conversion kit, enabling you to convert your own SU to electronic<br />
‘Pointless’ operation. This kit is polarity conscious, which means that you have to<br />
order appropriate to your car. They are, however, polarity protected, which means<br />
that if a pump is connected the wrong way it will not burn out, it will just not work.<br />
Negative earth 015.470 £56.41 each | £49.05 ex VAT<br />
Positive earth 015.471 £56.41 each | £49.05 ex VAT<br />
(For the double ended pumps on the next page you will need 2 kits)<br />
For AUF 300, AZX1300 series fuel<br />
pumps <strong>and</strong> 015.063. Use two for dual<br />
pumps series AZX1400, AZX1500 <strong>and</strong><br />
015 066. Negative earth (shown)<br />
015.082<br />
£36.80 each | £32.00 ex VAT<br />
For AUF 300, AZX1300 series fuel<br />
pumps <strong>and</strong> 015.064. Use two for dual<br />
pumps series AZX1400, AZX1500 <strong>and</strong><br />
015 067. Positive earth 015.083<br />
£36.80 each | £32.00 ex VAT<br />
For AUF200 series fuel pumps <strong>and</strong><br />
015.065 015.084<br />
£36.80 each | £32.00 ex VAT<br />
5
6<br />
FUEL<br />
THROTTLE OR CHOKE LINKAGE KIT<br />
Universal Throttle or Choke Linkage Kit. For use with pairs<br />
of HS carburettors, enabling you to make up either a throttle<br />
or choke connection. 100mm long rod (can be cut to<br />
length), a left h<strong>and</strong> lever, a right h<strong>and</strong> lever <strong>and</strong> a 32mm<br />
long actuating lever complete with screws, nuts <strong>and</strong><br />
washers. All parts plated<br />
015.525 £14.50 each | £12.61 ex VAT<br />
Steel <strong>and</strong> plated 015.234<br />
£11.13 each | £9.68 ex VAT<br />
BANJOS FOR PUSH ON HOSE<br />
For use with the Banjo Bolt that screws into SU float<br />
chambers. Uses 5 ⁄16” push on fuel hose<br />
Single Banjo 015.221<br />
£17.68 each | £15.37 ex VAT<br />
SU RETURN SPRING<br />
70mm (2 3 ⁄4”) long between<br />
ends. As fitted to MGBs for<br />
throttle <strong>and</strong> choke return,<br />
MG Midget/Austin Healey<br />
Sprite 1098 <strong>and</strong> 1275cc<br />
side throttle return spring,<br />
but can be used on many<br />
other cars 015.236<br />
£4.72 each | £4.10 ex VAT<br />
SU CARBURETTOR FITTINGS<br />
Double Banjo 015.222<br />
£18.49 each | £16.08 ex VAT<br />
BANJOS SCREW ON TYPE<br />
For use with the Banjo Bolt that screws into SU float<br />
chambers. Use 5 ⁄16” copper pipe with Nut <strong>and</strong> Olive.<br />
Single Banjo 015.226<br />
£17.10 each | £14.87 ex VAT<br />
Double Banjo 015.227<br />
£18.49 each | £16.08 ex VAT<br />
FLEXIBLE FUEL HOSE<br />
With stainless steel covering. Can be used with Banjos part<br />
number 015.226 <strong>and</strong> part number 015.227<br />
Length 406mm (16”) 015.212 £20.06 each | £17.44 ex VAT<br />
Length 457mm (18”) 015.213 £20.70 each | £18.00 ex VAT<br />
SU ACCESSORIES<br />
BANJO BOLTS<br />
This Banjo Bolt screws into all SU carburettor float chambers<br />
Brass & polished 015.297<br />
£11.13 each | £9.68 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Stainless steel 015.298<br />
£11.13 each | £9.68 ex VAT<br />
SU RETURN SPRING<br />
90mm (3 1 ⁄2”) long between<br />
ends. As fitted to MG<br />
Midget/Austin Healey<br />
Sprite 1098 <strong>and</strong> 1275cc<br />
centre throttle return spring,<br />
but can be used on many<br />
other cars 015.524<br />
£4.72 each | £4.10 ex VAT<br />
BANJO WASHER<br />
Fibre Washer 015.235<br />
£0.92 each | £0.80 ex VAT<br />
BANJOS SOLDER TYPE<br />
For use with the Banjo Bolt that screws into SU float<br />
chambers. Solder in 5 ⁄16”copper pipe<br />
Single Banjo 015.224<br />
£14.77 each | £12.84 ex VAT<br />
NUT & OLIVE FOR<br />
COPPER PIPE<br />
Use with Screw on Banjos<br />
<strong>and</strong> 5 ⁄16” copper pipe<br />
Nut 015.229<br />
£1.93 each | £1.68 ex VAT<br />
Olive 015.273<br />
£0.46 each | £0.40 ex VAT<br />
Double Banjo 015.225<br />
£18.49 each | £16.08ex VAT<br />
T PIECE SOLDER TYPE<br />
For soldering in 5 ⁄16” copper<br />
pipe. Not specifically for use<br />
with SU carburettors, it<br />
enables you to make up the<br />
fuel line on multi carburettor<br />
cars using soldered joints<br />
015.223<br />
£14.77 each | £12.84 ex VAT<br />
FLEXIBLE FUEL HOSE & BANJO<br />
With stainless steel covering. Has a Banjo on one end which<br />
fits to an SU float chamber using the Banjo Bolt. Other end<br />
screws to outlet of suitable SU Fuel Pump<br />
Length 356mm (14”) 015.210 £23.56 each | £20.49 ex VAT<br />
Length 533mm (21”) 015.211 £25.14 each | £21.86 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk FUEL<br />
BALL END<br />
015.201<br />
£5.08 each | £4.42 ex VAT<br />
SHORT CLEVIS PIN (9mm)<br />
015.232<br />
£2.39 each | £2.08 ex VAT<br />
LONG CLEVIS PIN (12mm)<br />
015.233<br />
£4.23 each | £3.68 ex VAT<br />
1 2 3 4 5 6 7 8 9 1011 12 13 14 1516<br />
CARBURETTOR NEEDLES<br />
There are so many different needles available, that we can’t<br />
possibly list them all here. Each one is identified by a two<br />
or three digit number stamped thereon. If you can quote<br />
this number then we can supply replacements.<br />
Alternatively, let us know the details of your car, make,<br />
model, year <strong>and</strong> engine size & we will supply the st<strong>and</strong>ard<br />
needles for your car. 015.530 Price on application<br />
SU ACCESSORIES & SPARE PARTS<br />
BALL SOCKET<br />
015.202<br />
£12.32 each | £10.71 ex VAT<br />
GASKET PACK<br />
Contains all gaskets <strong>and</strong> seals.<br />
Type Part No. Price each Ex VAT<br />
H1 AUE800 £8.97 £7.80<br />
H4 & H6 AUE801 £8.97 £7.80<br />
HD6 AUE805 £6.65 £5.78<br />
HD8 AUE806 £7.38 £6.42<br />
HS2 AUE810 £2.66 £2.31<br />
HS4 AUE811 £3.47 £3.02<br />
HS6 AUE812 £3.47 £3.02<br />
HIF4 AUE820 £8.86 £7.70<br />
D2 & H2 AUE900 £8.53 £7.42<br />
H4 & H6 AUE901 £8.71 £7.57<br />
SERVICE KIT<br />
Contains new jet, float valve, all gaskets <strong>and</strong> seals.<br />
Type Part No. Price each Ex VAT<br />
Two HS6 CSK22 £42.55 £37.00<br />
HS6 CSK24 £34.50 £30.00<br />
HS8 CSK29 £43.70 £38.00<br />
HD8 CSK30 £43.70 £38.00<br />
HD6 & HD8 CSK32 £43.70 £38.00<br />
HD6 & HD6 Th CSK37 £41.40 £36.00<br />
HD8 CSK38 £41.40 £36.00<br />
HS4 CSK39 £27.60 £24.00<br />
D2/H1/H2/H4/HV3 CSK40 £27.60 £24.00<br />
H6 CSK41 £27.60 £24.00<br />
H4 Th CSK42 £27.60 £24.00<br />
Two HS4 CSK49 £56.35 £49.00<br />
Two HIF4 CSK50 £34.50 £30.00<br />
HS2 CSK51 £27.60 £24.00<br />
HS4 CSK52 £27.60 £24.00<br />
HS6 CSK54 £29.90 £26.00<br />
Two HS6 CSK55 £43.70 £38.00<br />
Two HIF6 CSK58 £43.70 £38.00<br />
Two HS2 or HS4 CSK59 £37.95 £33.00<br />
Two CSK60 £39.10 £34.00<br />
Two HS6 CSK63 £39.10 £34.00<br />
HIF7 CSK82 £29.90 £26.00<br />
CHOKE CONNECTING LINKS<br />
With original style fork ends <strong>and</strong> nickel plated<br />
Adjustable between 178mm & 209mm (7” to 8 1 ⁄4”) between<br />
centres. As fitted to MG T series<br />
015.521 £17.51 each | £15.23 ex VAT<br />
Adjustable between 203mm & 235mm (8 to 9 1 ⁄4”) between<br />
centres. As fitted to Triumph TR2/TR3<br />
015.522 £24.05 each | £20.91 ex VAT<br />
THROTTLE CONNECTING RODS<br />
Length Part No. Price each Ex VAT<br />
76mm (3”) 015.203 £20.27 £17.63<br />
102mm (4”) 015.204 £20.27 £17.63<br />
127mm (5”) 015.205 £20.27 £17.63<br />
152mm (6”) 015.206 £20.27 £17.63<br />
178mm (7”) 015.207 £20.27 £17.63<br />
203mm (8”) 015.208 £20.27 £17.63<br />
REBUILD KITS<br />
Contains service kit, throttle disc, spindle, bushes & screws.<br />
Type Part No. Price each Ex VAT<br />
Two HS2 CRK101 £63.53 £55.24<br />
HS2 CRK104 £36.80 £32.00<br />
HIF4 CRK116 £69.00 £60.00<br />
HS4 CRK119 £35.65 £31.00<br />
HS2 CRK200 £48.30 £42.00<br />
HV3 & H2 CRK203 £39.10 £34.00<br />
H4 CRK205 £41.40 £36.00<br />
H4 Th CRK206 £41.40 £36.00<br />
H6 CRK210 £41.40 £36.00<br />
HD8 & HD8 Th CRK216 £58.65 £51.00<br />
HD6 & HD6 Th CRK217 £58.65 £51.00<br />
HS2 CRK219 £41.40 £36.00<br />
HS6 CRK223 £41.40 £36.00<br />
H1 CRK226 £43.70 £38.00<br />
Two HIF6 CRK228 £80.50 £70.00<br />
H6 CRK229 £43.70 £38.00<br />
HD6 CRK231 £71.30 £62.00<br />
HD8 CRK233 £71.30 £62.00<br />
HD8 CRK233 £58.65 £51.00<br />
H6 Th CRK240 £50.60 £44.00<br />
2x HS6 CRK243 £66.70 £58.00<br />
HS2 CRK251 £55.20 £48.00<br />
HS6 CRK253 £57.50 £50.00<br />
Two HS4 CRK254 £57.50 £50.00<br />
HD6 Th CRK299 £58.65 £51.00<br />
CARBURETTOR NEEDLE<br />
PROFILE CHARTS<br />
A useful little book which<br />
lists over 700 SU needle<br />
profiles available together<br />
with their diameters at up to<br />
20 points along each<br />
profile. The book also advises<br />
how to select alternative<br />
profiles to try on your<br />
modified car, or to make<br />
better use of modern fuels.<br />
094.429<br />
£6.00 each | No VAT<br />
7
8<br />
FUEL<br />
Specification<br />
Pair of mounting<br />
bobbins & earthing<br />
wire 015.400<br />
£7.10 each<br />
£6.17 ex VAT<br />
90 o fitting for solid<br />
state & silver pumps<br />
8mm ( 5 ⁄16”) outlet<br />
015.397 £4.17 each<br />
£3.63 ex VAT<br />
Flow Rate<br />
galls/hour<br />
Straight fitting for<br />
solid state <strong>and</strong> silver<br />
pumps 8mm ( 5 ⁄16”)<br />
outlet 015.401<br />
£2.42 each<br />
£2.10 ex VAT<br />
90 deg for red <strong>and</strong><br />
blue pumps 8mm<br />
( 5 ⁄16”) outlet 015.398<br />
£6.28 each<br />
£5.46 ex VAT<br />
at p.s.i.<br />
90 deg for red <strong>and</strong><br />
blue pumps 10mm<br />
( 3 ⁄8”) outlet 015.399<br />
£5.87 each<br />
£5.10 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
SOLID STATE 12 VOLT NEGATIVE EARTH<br />
Supplied with all the fittings shown in the photograph right<br />
(one of these is a filter). These pumps have 1 ⁄8 NPTF threads<br />
<strong>and</strong> use 8mm ( 5 ⁄16”) pipe. Will prime a dry fuel system up to<br />
a height of 300mm. Size 60mm x 48mm.<br />
Power Range<br />
up to B.H.P.<br />
Part number Price each Ex VAT<br />
Road 12 2.5 - 3.0 130 015.330 £55.15 £47.96<br />
Fast road 18 4.0 - 5.5 150 015.331 £58.06 £50.49<br />
Competition 25 6.0 - 7.0 180 015.332 £60.95 £53.00<br />
Specification<br />
Flow Rate<br />
galls/hour<br />
at p.s.i.<br />
POINTS TYPE 12 VOLT NEGATIVE EARTH<br />
These pumps are supplied with all the fittings shown in the<br />
photograph left. The road pump will prime a dry fuel system<br />
up to a height of 600mm <strong>and</strong> fast road <strong>and</strong> competition will<br />
prime a dry fuel system up to a height of 800mm.<br />
Size 135 x 50mm.<br />
Power Range<br />
up to B.H.P.<br />
Part number Price each Ex VAT<br />
Road (silver) 18 4.0 - 5.5 150 015.333 £88.44 £76.90<br />
Fast road (silver) 27 5.0 - 6.0 200 015.334 £89.01 £77.40<br />
Competition (red) 35 6.0 - 7.25 200+ 015.335 £95.45 £83.00<br />
Specification Volts Earth<br />
FACET FUEL PUMPS<br />
Flow Rate<br />
galls/hour<br />
at p.s.i.<br />
HISTORIC TYPE 12 VOLTS NEGATIVE EARTH<br />
Supplied without fittings. Size 135mm x 50mm<br />
Power Range<br />
up to B.H.P.<br />
Part number Price each Ex VAT<br />
Competition (blue) 12 Neg 35 6.0–8.0 200+ 015.339 £89.70 £78.00<br />
FITTINGS FOR FACET PUMPS<br />
Filter Union for Facet<br />
solid state pumps<br />
015.402<br />
£3.57 each<br />
£3.10 ex VAT<br />
Solid state <strong>and</strong> silver pumps have 1⁄8 NPTF<br />
threads to suit 8mm (5⁄16”) pipe fittings. Red &<br />
blue have 1⁄4 NPTF threads to suit 10mm (3⁄8”)<br />
pipe fittings
Website open 24hrs everey day<br />
www.holden.co.uk FUEL<br />
In addition to the filter element, these filter/regulators contain a membrane which reacts to provide a steady flow of fuel to<br />
improve running, particularly idling. The membrane has an adjustment enabling you to regulate it within limits to obtain the<br />
best idling of your engine<br />
FILTER/REGULATOR<br />
67mm diameter with plastic<br />
bowl. Suitable for engines<br />
up to 130 bhp. Fuel flow is<br />
left to right in picture. You<br />
can use either 1 ⁄4” or 5 ⁄16” hose<br />
015.174<br />
£43.70 each | £38.00 ex VAT<br />
Spare Filter Element<br />
015.178<br />
£3.91 each | £3.40 ex VAT<br />
FILTER/REGULATOR<br />
85mm diameter with metal<br />
bowl. Suitable for engines<br />
130 to 200 bhp. Fuel flow is<br />
right to left in picture. Outlet<br />
<strong>and</strong> blanking plug can be<br />
assembled so that outlet is<br />
either horizontal or pointing<br />
upwards. 5 ⁄16” fuel hose<br />
pushes on. Supplied with<br />
mounting bracket & screws<br />
015.380<br />
£63.02 each | £54.80 ex VAT<br />
Spare Filter Element<br />
015.381<br />
£5.69 each | £4.95 ex VAT<br />
BOWL TYPE FUEL FILTERS & REGULATORS<br />
FILTER/REGULATOR<br />
67mm diameter with alloy<br />
bowl. Suitable for engines<br />
up to 130 bhp. Fuel flow is<br />
left to right in picture. You<br />
can use either 1 ⁄4” or 5 ⁄16” hose<br />
015.175<br />
£44.74 each | £38.90 ex VAT<br />
Spare Filter Element<br />
015.178<br />
£3.91 each | £3.40 ex VAT<br />
FILTER/REGULATOR<br />
85mm diameter with alloy<br />
bowl <strong>and</strong> pressure gauge<br />
Suitable for engines 130 to<br />
200 bhp. Fuel flow is right to<br />
left in picture. 5 ⁄16” fuel hose<br />
pushes on. Supplied with a<br />
1 bar pressure gauge<br />
which can be removed <strong>and</strong><br />
blanked off with the plug<br />
provided 015.180<br />
£64.40 each | £56.00 ex VAT<br />
Spare Filter Element<br />
015.179<br />
£5.69 each | £4.95 ex VAT<br />
For Spares see below<br />
REPLACEMENT BOWL<br />
If you should be unlucky<br />
<strong>and</strong> break the (strong)<br />
bowl, we sometimes have<br />
replacements 015.249<br />
£14.38 each | £12.50 ex VAT<br />
FILTER/REGULATOR<br />
85mm diameter with plastic<br />
bowl. Suitable for engines<br />
130 to 200 bhp. Fuel flow is<br />
right to left in picture. 5 ⁄16”fuel<br />
hose pushes on 015.176<br />
£48.30 each | £42.00ex VAT<br />
Spare Filter Element<br />
015.179<br />
£5.69 each | £4.95 ex VAT<br />
FUEL PRESSURE<br />
REGULATOR<br />
67mm diameter. Suitable for<br />
engines up to 130 bhp. Fuel<br />
flow is right to left in picture.<br />
5 ⁄16” fuel hose pushes on.<br />
This model has no provision<br />
for filtering the fuel<br />
015.382<br />
£41.92 each | £36.45 ex VAT<br />
PRESSURE GAUGE<br />
Spare for 015.180<br />
015.893<br />
£17.25 each | £15.00 ex VAT<br />
FILTER/REGULATOR<br />
85mm diameter with alloy<br />
bowl. Suitable for engines<br />
130 to 200 bhp. Fuel flow is<br />
right to left in picture. 5 ⁄16”fuel<br />
hose pushes on 015.177<br />
£48.30 each | £42.00 ex VAT<br />
Spare Filter Element<br />
015.179<br />
£5.69 each | £4.95 ex VAT<br />
FUEL PRESSURE<br />
REGULATOR<br />
Fit into your fuel line <strong>and</strong><br />
dial up the pressure from 1<br />
to 5 p.s.i. Chrome finish<br />
Fits 1 ⁄4” diameter fuel hoses<br />
015.890<br />
£23.92 each | £20.80 ex VAT<br />
Fits 5 ⁄16” diameter fuel hoses<br />
015.891<br />
£24.67 each | £21.45 ex VAT<br />
Fits 3 ⁄8” diameter fuel hoses<br />
015.892<br />
£23.92 each | £20.80 ex VAT<br />
SPARE BLANKING PLUG<br />
For blanking off the hole on<br />
015.180 when you have<br />
removed the gauge<br />
015.894<br />
£2.88 each | £2.50 ex VAT<br />
9
10<br />
FUEL<br />
FUEL FILTER/WATER STRAINER<br />
Alloy head <strong>and</strong> glass bowl. Can be<br />
dismantled for cleaning.<br />
015.170 £20.48 each | £17.81 ex VAT<br />
FOR 1 ⁄4” CLEAR/RUBBER HOSE<br />
Glass tube with chrome end fittings.<br />
Can be dismantled for cleaning.<br />
015.378 £10.18 each | £8.85 ex VAT<br />
THROW AWAY TYPE<br />
Can be connected using either 1 ⁄4” or<br />
5 ⁄16” push on fuel hose.<br />
015.171 £2.42 each | £2.10 ex VAT<br />
BLACK KNOB<br />
Competition type fuel tap<br />
with black plastic knob.<br />
Select adaptor on right<br />
015.350<br />
£6.84 each | £5.95 ex VAT<br />
BOWL TYPE FUEL FILTER<br />
FITTING KIT<br />
The first way to plumb in 015.170 is to<br />
use this fitting kit. Comprises adaptor,<br />
washer, union <strong>and</strong> nut. The union is<br />
suitable for a 1 ⁄4” copper pipe to fit<br />
inside or 1 ⁄4” fuel hose can be stretched<br />
over it or 5 ⁄16” fuel hose can be fitted<br />
over it <strong>and</strong> retained with a hose clip.<br />
Can be used on either the inlet or the<br />
outlet of filter.<br />
015.248 £15.99 each | £13.90 ex VAT<br />
IN LINE FUEL FILTERS<br />
YELLOW KNOB<br />
Competition type fuel tap<br />
with yellow cast metal knob.<br />
Select adaptor on right<br />
015.351<br />
£8.91 each | £7.75 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
ADAPTOR FOR 1 ⁄4" HOSE<br />
Adaptor for fuel taps<br />
015.350 & 015.351<br />
015.352<br />
£2.50 each | £2.17 ex VAT<br />
BANJO BOLT, BANJO & WASHER<br />
The second way to plumb in 015.170<br />
is to use 2 Banjo bolts, 2 Banjos <strong>and</strong> 4<br />
washers. Use 5 ⁄16" fuel hose.<br />
Banjo Bolt<br />
015.168 £8.44 each | £7.34 ex VAT<br />
Banjo<br />
015.169 £13.79 each | £11.99 ex VAT<br />
Washer<br />
015.200 £0.92 each | £0.80 ex VAT<br />
FOR USE WITH METAL FUEL PIPE<br />
Glass tube with chrome end fittings. Supplied with short lengths of flexible fuel<br />
pipe to allow simple installation once you have cut your metal fuel pipe. Can be<br />
dismantled<br />
For use with 1 ⁄4” diameter pipe 015.172 £16.24 each | £14.12 ex VAT<br />
For use with 5 ⁄16” diameter pipe 015.173 £16.24 each | £14.12 ex VAT<br />
THROW AWAY TYPE<br />
Fuel filter, 6mm inlet/outlet round clear<br />
type.<br />
015.376 £1.55 each | £1.35 ex VAT<br />
FUEL TAPS<br />
THROW AWAY TYPE<br />
Fuel filter, 6mm inlet/outlet square<br />
MRC type.<br />
015.377 £1.67 each | £1.45ex VAT<br />
ADAPTOR FOR 5 ⁄16" HOSE<br />
Adaptor for fuel taps<br />
015.350 & 015.351<br />
015.353<br />
£2.50 each | £2.17 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk FUEL<br />
CLEAR PVC FUEL HOSE<br />
1 ⁄4” bore 015.910<br />
£2.88 per metre | £2.50 ex VAT<br />
5 ⁄16” bore 015.911<br />
£2.88 per metre | £2.50 ex VAT<br />
JOINERS<br />
For joining two lengths of 1 ⁄4”<br />
bore fuel hose 015.284<br />
£3.32 each | £2.89 ex VAT<br />
For joining 1 ⁄4” to 5 ⁄16” bore<br />
fuel hose 015.285<br />
£3.32 each | £2.89 ex VAT<br />
For joining two lengths of<br />
5 ⁄16” bore fuel hose 015.286<br />
£3.32 each | £2.89 ex VAT<br />
T PIECE FOR PUSH ON<br />
HOSE<br />
For joining three lengths of<br />
1 ⁄4” bore fuel hose 015.219<br />
£4.72 each | £4.10 ex VAT<br />
For joining three lengths of<br />
5 ⁄16” bore fuel hose 015.220<br />
£10.88 each | £9.45 ex VAT<br />
CHOKE CABLE<br />
1.6 metres long. Can also be used for<br />
other functions<br />
015.384 £8.28 each | £7.20 ex VAT<br />
CABLE ADJUSTER<br />
Use at the end of a throttle or choke<br />
cable to provide easy adjustment.<br />
Supplied with two nuts as shown<br />
015.392 £1.64 each | £1.43 ex VAT<br />
FUEL HOSE & FITTINGS<br />
Stocked on the roll <strong>and</strong> sold by the metre length<br />
RUBBER FUEL HOSE<br />
Resistant to all modern<br />
fuels. Black<br />
1 ⁄4” bore 015.214<br />
£4.37 per metre | £3.80 ex VAT<br />
5 ⁄16” bore 015.215<br />
£4.37 per metre | £3.80 ex VAT<br />
RUBBER/STAINLESS<br />
Nitrile rubber with stainless<br />
steel overbraid with rubber<br />
fitting on ends secured by a<br />
clip. Suits 1 ⁄4” & 5 ⁄16” pipe<br />
65mm long 015.050<br />
£2.88 each | £2.50 ex VAT<br />
170mm long 015.051<br />
£3.16 each | £2.75 ex VAT<br />
190mm long 015.052<br />
£3.39 each | £2.95 ex VAT<br />
255mm long 015.053<br />
£4.20 each | £3.65 ex VAT<br />
300mm long 015.054<br />
£5.35 each | £4.65 ex VAT<br />
355mm long 015.055<br />
£5.69 each | £4.95 ex VAT<br />
410mm long 015.056<br />
£8.51 each | £7.40 ex VAT<br />
560mm long 015.057<br />
£8.63 each | £7.50 ex VAT<br />
RUBBER/COTTON HOSE<br />
Nitrile rubber with cotton<br />
overbraid suitable for lead<br />
substitute, leaded, unleaded<br />
fuels, brake fluid (low<br />
pressure), diesel, air etc<br />
1 ⁄4” bore 015.216<br />
£4.54 per metre | £3.95 ex VAT<br />
5 ⁄16” bore 015.217<br />
£4.54 per metre | £3.95 ex VAT<br />
3 ⁄8” bore 015.218<br />
£4.54 per metre | £3.95 ex VAT<br />
HOSE CLIP–BLUE<br />
For cotton overbraided or<br />
stainless steel covered fuel<br />
hoses. Slip over end of<br />
hose <strong>and</strong> tighten, the<br />
finisher hides both the clip<br />
<strong>and</strong> the end of the hose<br />
For 1 ⁄4” bore hose 091.601<br />
£5.74 each | £4.99 ex VAT<br />
For 5 ⁄16” bore hose 091.603<br />
£5.74 each | £4.99 ex VAT<br />
For 3 ⁄8” bore hose 091.605<br />
£5.74 each | £4.99 ex VAT<br />
CARBURETTOR ACCESSORIES<br />
THROTTLE CABLE<br />
Requires 8mm ( 5 ⁄16”) diameter hole in<br />
any bulkhead. 1 metre long. A quality<br />
cable with smooth operation. Blue<br />
015.390 £6.60 each | £5.74 ex VAT<br />
SINGLE CABLE CROSS BOLT<br />
Length 47mm<br />
015.393 £5.64 each | £4.90 ex VAT<br />
RUBBER/STAINLESS<br />
Nitrile rubber with stainless<br />
steel overbraid suitable for<br />
lead substitute, leaded,<br />
unleaded fuels, brake fluid<br />
(low pressure), diesel, etc<br />
1 ⁄4” bore 015.282<br />
£10.12 per metre | £8.80 ex VAT<br />
5 ⁄16” bore 015.283<br />
£10.12 per metre | £8.80 ex VAT<br />
3 ⁄8” bore 015.288<br />
£10.58 per metre | £9.20 ex VAT<br />
HOSE CLIP–RED<br />
For cotton overbraided or<br />
stainless steel covered fuel<br />
hoses. Slip over end of<br />
hose <strong>and</strong> tighten, the<br />
finisher hides both the clip<br />
<strong>and</strong> the end of the hose<br />
For 1 ⁄4” bore hose 091.600<br />
£5.74 each | £4.99 ex VAT<br />
For 5 ⁄16” bore hose 091.602<br />
£5.74 each | £4.99 ex VAT<br />
PEDAL BLOCK<br />
Fits over your existing throttle<br />
(accelerator) pedal <strong>and</strong> is secured by<br />
grub screw or welding. It has 2 holes<br />
to take two throttle cables<br />
015.395 £9.20 each | £8.00 ex VAT<br />
DOUBLE CABLE CROSS BOLT<br />
Length 55mm<br />
015.394 £5.64 each | £4.90 ex VAT<br />
11
12<br />
FUEL<br />
NUTS<br />
Copper Nut for:<br />
1 ⁄4” copper pipe 015.262<br />
£0.92 each | £0.80 ex VAT<br />
5 ⁄16” copper pipe 015.272<br />
£0.92 each | £0.80 ex VAT<br />
BRACKETED ELBOW<br />
Bracketed Elbow for:<br />
5 ⁄16” copper pipe 015.277<br />
£7.45 each | £6.48 ex VAT<br />
COPPER PIPE & SOLDERLESS FITTINGS<br />
FUEL PIPE<br />
Copper:<br />
1 ⁄4” diameter 015.261 £5.29 per metre | £4.60 ex VAT<br />
5<br />
⁄16” diameter 015.271 £5.52 per metre | £4.80 ex VAT<br />
Copper Nickel:<br />
5<br />
⁄16” diameter 015.345 £7.48 per metre | £6.50 ex VAT<br />
PUSH-PULL TANK TO 1 ⁄4" PIPE<br />
For screwing in to tank, thread is 1 ⁄8"<br />
BSP <strong>and</strong> supplied with nut <strong>and</strong> nipple<br />
for soldering to 1 ⁄4" outside dia. pipe<br />
015.580<br />
£26.45 each | £23.00 ex VAT<br />
SIDE FEED BSA A65<br />
As fitted to BSA A65. Brass<br />
construction. 1/4 x 1/4 BSP 015.585<br />
£28.75 each | £25.00 ex VAT<br />
T PIECE<br />
Copper T piece for:<br />
1 ⁄4” copper pipe 015.264<br />
£5.75 each | £5.00 ex VAT<br />
5 ⁄16” copper pipe 015.274<br />
£7.48 each | £6.50 ex VAT<br />
STRAIGHT CONNECTOR<br />
Straight Connector for:<br />
1 ⁄4” copper pipe 015.268<br />
£2.85 each | £2.48 ex VAT<br />
5 ⁄16” copper pipe 015.278<br />
£3.16 each | £2.75 ex VAT<br />
PETROL TAPS<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
BSP NUT<br />
1 ⁄4” BSP nut for 5 ⁄16” copper<br />
pipe 015.913<br />
£2.76 each | £2.40 ex VAT<br />
BRACKETED T PIECE<br />
Bracketed T piece for:<br />
1 ⁄4” copper pipe 015.265<br />
£12.77 each | £11.10 ex VAT<br />
5 ⁄16” copper pipe 015.275<br />
£12.77 each | £11.10 ex VAT<br />
BRACKETED STRAIGHT<br />
CONNECTOR<br />
Bracketed connector for:<br />
1 ⁄4” copper pipe 015.269<br />
£12.77 each | £11.10 ex VAT<br />
5 ⁄16” copper pipe 015.279<br />
£12.77 each | £11.10 ex VAT<br />
PUSH-PULL 1 ⁄8" X 1 ⁄4" BSP<br />
Supplied with ferrules <strong>and</strong> nuts<br />
015.581<br />
£27.60 each | £24.00 ex VAT<br />
LEVER TYPE TANK TO 1/4" BSP<br />
For screwing in to tank, thread is 1/4"<br />
BSP <strong>and</strong> fitted with a filter. Outlet is<br />
1/4" BSP. Brass 015.583<br />
£24.15 each | £21.00 ex VAT<br />
OLIVES<br />
Copper Olive for:<br />
1 ⁄4” copper pipe 015.263<br />
£0.46 each | £0.40 ex VAT<br />
5 ⁄16” copper pipe 015.273<br />
£0.46 each | £0.40 ex VAT<br />
ELBOW<br />
Copper Elbow for:<br />
1 ⁄4” copper pipe 015.266<br />
£5.64 each | £4.90 ex VAT<br />
5 ⁄16” copper pipe 015.276<br />
£5.64 each | £4.90 ex VAT<br />
BULKHEAD CONNECTOR<br />
& LOCKNUT<br />
Bulkhead connector for:<br />
1 ⁄4” copper pipe 015.270<br />
£4.72 each | £4.10 ex VAT<br />
5 ⁄16” copper pipe 015.280<br />
£4.72 each | £4.10 ex VAT<br />
Locknut for both 015.281<br />
£1.73 each | £1.50 ex VAT<br />
AP LEVER TYPE 1/8" BSP<br />
For screwing in to tank, thread is 1 ⁄8"<br />
BSP. Outlet is 1 ⁄4" BSP. Brass 015.582<br />
£15.53 each | £13.50 ex VAT<br />
LEVER TYPE TANK TO 1/4" BSP<br />
For screwing in to tank, thread is 1/4"<br />
BSP <strong>and</strong> fitted with a filter. Outlet is<br />
1/4" BSP. Triumph Original Equipment<br />
Part No. is 15772/L 015.584<br />
£9.18 each | £7.98 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk FUEL<br />
SU CARBURETTOR COVERS, RAM PIPES & BELLMOUTHS<br />
These polished aluminium covers fit over your carburettor dashpots to give them a very smart appearance under the bonnet<br />
For <strong>Car</strong>burettor size 1 1 ⁄4”<br />
015.155<br />
£13.80 each | £12.00 ex VAT<br />
Ram Pipe for 1 1 ⁄2” carburettor,<br />
75mm long, with mesh<br />
015.150<br />
£13.80 each | £12.00 ex VAT<br />
Ram Pipe for 1 1 ⁄2” carburettor,<br />
75mm long, without<br />
mesh 015.165<br />
£12.08 each | £10.50 ex VAT<br />
FUEL UNION<br />
For DCOE carburettors 015.354<br />
£6.90 each | £6.00 ex VAT<br />
SINGLE DELLORTO FUEL UNION<br />
For DHLA carburettors<br />
015.356 £17.89 each | £15.56 ex VAT<br />
For <strong>Car</strong>burettor size 1 1 ⁄2”<br />
015.156<br />
£13.80 each | £12.00 ex VAT<br />
Ram Pipe for 1 3 ⁄4” carburettor,<br />
75mm long, with mesh<br />
015.153<br />
£13.80 each | £12.00 ex VAT<br />
Ram Pipe for 2” carburettor,<br />
75mm long, without mesh<br />
015.160<br />
£12.08 each | £10.50 ex VAT<br />
For <strong>Car</strong>burettor size 1 3 ⁄4”<br />
015.157<br />
£13.80 each | £12.00 ex VAT<br />
Ram Pipe for 2” carburettor,<br />
75mm long, with mesh<br />
015.152<br />
£13.80 each | £12.00 ex VAT<br />
Bellmouth for 2” carburettor,<br />
38mm long, without<br />
mesh 015.159<br />
£12.08 each | £10.50 ex VAT<br />
WEBER ACCESSORIES<br />
RETURN SPRING<br />
Suits Weber carburettors. 90mm long<br />
015.237 £4.05 each | £3.52 ex VAT<br />
DELLORTO ACCESSORIES<br />
RETURN SPRING<br />
Suits Dellorto carburettors. 90mm long<br />
015.237 £4.05 each | £3.52 ex VAT<br />
For <strong>Car</strong>burettor size 2”<br />
015.158<br />
£13.80 each | £12.00 ex VAT<br />
Bellmouth for 2” carburettor,<br />
38mm long, with mesh<br />
015.154<br />
£13.80 each | £12.00 ex VAT<br />
SU Sizes:<br />
H-2 or HS-2 1 1 ⁄4“<br />
H-4, HD-4 or HS-4 1 1 ⁄2“<br />
HIF4 1.5“<br />
H-6, HD-6 or HS-6 1 3 ⁄4“<br />
HIF7 1.875“<br />
HIF6 1.75“<br />
H-8, HD-8 or HS-8 2“<br />
90 DEGREE FUEL UNION<br />
For DCOE carburettors 015.355<br />
£14.49 each | £12.60 ex VAT<br />
TWO DELLORTOS FUEL UNION<br />
For DHLA carburettors<br />
015.357 £22.99 each | £19.99 ex VAT<br />
13
14<br />
FUEL<br />
MONZA<br />
2”–Thread size 2” x 18 TPI:<br />
Chrome plated brass 015.184<br />
£41.63 each | £36.20 ex VAT<br />
Light alloy 015.181<br />
£44.28 each | £38.50 ex VAT<br />
2 1 ⁄2”–Thread size 2 1 ⁄2” x 16 TPI:<br />
Chrome plated brass 015.185<br />
£50.60 each | £44.08 ex VAT<br />
Light alloy 015.182<br />
£52.90 each | £46.00 ex VAT<br />
2 3 ⁄4”–Thread size 2 3 ⁄4” X 16TPI:<br />
Chrome plated brass 015.186<br />
£56.35 each | £49.00 ex VAT<br />
Light alloy 015.183<br />
£59.80 each | £52.00 ex VAT<br />
BRASS COLLARS<br />
For soldering to the filler<br />
pipe of your tank:<br />
For 2” filler caps <strong>and</strong> filler<br />
pipes of 1 3 ⁄4 in diameter<br />
015.103<br />
£10.33 each | £8.98 ex VAT<br />
For 2 1 ⁄2” filler caps <strong>and</strong> filler<br />
pipes of 2 1 ⁄4” diameter<br />
015.104<br />
£12.33 each | £10.72 ex VAT<br />
For 2 3 ⁄4” filler caps <strong>and</strong> filler<br />
pipes of 2 1 ⁄2” diameter<br />
015.105<br />
£15.23 each | £13.24 ex VAT<br />
FLIP TOP FILLER CAP<br />
Chrome finish, complete<br />
with 51mm (2”) diameter<br />
filler neck. Lift catch to<br />
open, not lockable. Suits<br />
Triumph Spitfire Mk I–IV<br />
<strong>and</strong> TR6 but can be used<br />
on other cars 015.240<br />
£44.85 each | £39.00 ex VAT<br />
ALLOY COLLARS<br />
For welding to the<br />
aluminium filler pipe of your<br />
tank:<br />
For 2” filler caps <strong>and</strong> filler<br />
pipes of 2 in diameter<br />
015.106<br />
£7.94 each | £6.90 ex VAT<br />
For 2 1 ⁄2” filler caps <strong>and</strong> filler<br />
pipes of 2 1 ⁄2” diameter<br />
015.107<br />
£8.28 each | £7.20 ex VAT<br />
For 2 3 ⁄4” filler caps <strong>and</strong> filler<br />
pipes of 2 3 ⁄4 “ diameter<br />
015.108<br />
£9.20 each | £8.00 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Originally made in the 30s these Filler Caps will always be associated with<br />
famous competition cars of the sixties <strong>and</strong> they do not look out of place on more<br />
modern machinery. The caps are supplied in vented form but the small vent hole<br />
can be closed up if desired. The Aston is supplied with a quick release action or<br />
in 3.5” form with a roller catch. The smoother looking Monza has a snap action.<br />
Both caps can also be used on oil tanks, rocker covers etc.<br />
ASTON<br />
2 1 ⁄2”–Thread size 2 1 ⁄2” x 16 TPI:<br />
Chrome plated brass 015.195<br />
£50.60 each | £44.00 ex VAT<br />
Light alloy 015.189<br />
£52.90 each | £46.00 ex VAT<br />
2 3 ⁄4”–Thread size 2 3 ⁄4” x 16 TPI:<br />
Chrome plated brass 015.196<br />
£56.35 each | £49.00 ex VAT<br />
Light alloy 015.190<br />
£59.80 each | £52.00 ex VAT<br />
LOCKING FILLER CAP<br />
Chrome finish, complete<br />
with 51mm (2”) diameter<br />
filler neck. Suits Triumph<br />
TR3, TR4, TR5, TR6 but<br />
can be used on other cars<br />
015.241<br />
£40.25 each | £35.00 ex VAT<br />
FILLER CAPS<br />
CHROME FLANGES<br />
For bolting to your tank:<br />
For 2” filler caps 015.109<br />
£20.70 each | £18.00 ex VAT<br />
For 2 1 ⁄2” filler caps 015.110<br />
£25.30 each | £22.00ex VAT<br />
For 2 3 ⁄4” filler caps 015.111<br />
£29.90 each | £26.00 ex VAT<br />
ALLOY FLANGE<br />
For the 3 1 ⁄2” Aston filler cap<br />
015.112<br />
£33.93 each | £29.50 ex VAT<br />
LOZENGE SHAPE<br />
FILLER CAP<br />
Chrome finish, complete<br />
with mild steel filler neck.<br />
Lockable, two keys<br />
supplied. As used on<br />
Morgans etc.<br />
With 51mm (2”) diameter<br />
filler neck 015.242<br />
£67.85 each | £59.00 ex VAT<br />
With 57mm (2 1 ⁄4”) diameter<br />
filler neck 015.243<br />
£62.10 each | £54.00 ex VAT<br />
ASTON WITH ROLLER CATCH<br />
3 1 ⁄2”–Thread size 3 1 ⁄2” BSP. Light alloy<br />
only 015.193<br />
£171.64 each | £149.25 ex VAT<br />
The filler caps shown here need to be<br />
fitted using either a collar, flange or<br />
flange with funnel as detailed below:<br />
ALUMINIUM FLANGE<br />
WITH FUNNEL<br />
For bolting to the bodywork.<br />
Connection to tank is then<br />
by rubber hose indicated:<br />
For 2” Monza filler cap with<br />
2” hose 015.101<br />
£39.74 each | £34.56 ex VAT<br />
For 2 1 ⁄2” filler caps with 2 or<br />
2 1 ⁄4” hose 015.113<br />
£48.30 each | £42.00 ex VAT<br />
For 2 3 ⁄4” filler caps with 2, 2 1 ⁄4<br />
or 2 1 ⁄2” hose 015.114<br />
£50.60 each | £44.00 ex VAT<br />
For the 3 1 ⁄2” Aston filler cap<br />
with 2, 2 1 ⁄4 or 2 1 ⁄2 “ hose<br />
015.115<br />
£57.39 each | £49.90 ex VAT<br />
LOCKABLE INSERT<br />
To use with flange/funnels<br />
015.113, 015.114 &<br />
015.115. Vented. This<br />
provides a secondary lock<br />
beneath the filler caps<br />
which cannot be seen from<br />
the outside 015.122<br />
£27.60 each | £24.00 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
FILLER CAPS<br />
FUEL<br />
These filler caps look like the Monza <strong>and</strong> Aston on the previous page but they incorporate a lock <strong>and</strong> are specifically<br />
designed for Minis, or if your car has the same 63.5mm (2 1 ⁄2”) diameter filler neck as a Mini then they can be fitted. For use<br />
with the original Mini tank pipe fittings where a push-in-<strong>and</strong>-twist-to-lock cap is normally used. They fit over the end of the<br />
filler neck <strong>and</strong> are then rotated to the desired position <strong>and</strong> secured with three grub screws <strong>and</strong> Allen key supplied. The<br />
lockable insert then fits into the cap ring <strong>and</strong> locks on to your filler neck as did the original.<br />
MONZA LOCKING CAP<br />
Chrome plated on brass 015.188<br />
£81.47 each | £70.84 ex VAT<br />
Polished aluminium 015.187<br />
£83.77 each | £72.84 ex VAT<br />
MINI<br />
STAINLESS STEEL CAP<br />
For use with the original Mini tank pipe<br />
fittings where a push-in-<strong>and</strong>-twist-cap<br />
is normally used. It replaces the<br />
original cap. Made in stainless steel, it<br />
has a knurled edge for easy grip when<br />
turning <strong>and</strong> a built-in vent valve. Also<br />
fits MGA, MGB, MGC <strong>and</strong> Midget<br />
015.372<br />
£10.29 each | £8.95 ex VAT<br />
FILLER CAP<br />
2“ dia, 3” PCD fixing holes in flange,<br />
with integral funnel for 2/2 1 ⁄4” internal<br />
diameter hose. Non locking 015.120<br />
£86.83 each | £75.50 ex VAT<br />
Locking version, as shown 015.121<br />
£98.33 each | £85.50 ex VAT<br />
THREADED RING<br />
Ring incorporating captive nuts for<br />
Aero filler caps.<br />
015.251 £12.78 each | £11.11 ex VAT<br />
MINI<br />
ALLOY ASTON LOCKING CAP<br />
Polished aluminium. Also fits MGA,<br />
MGB, MGC, Midget <strong>and</strong> Sprite etc.<br />
015.192<br />
£73.07 each | £63.54ex VAT<br />
MINI<br />
STAINLESS STEEL LOCKING CAP<br />
For use with the original Mini tank pipe<br />
fittings where a push-in-<strong>and</strong>-twist-cap<br />
is normally used. It replaces the<br />
original cap. Made in stainless steel<br />
<strong>and</strong> supplied with two keys. Also fits<br />
MGA, MGB, MGC <strong>and</strong> Midget<br />
015.370<br />
£11.44 each | £9.95 ex VAT<br />
AERO FILLER CAPS<br />
FILLER CAP<br />
3” dia, 4” PCD fixing holes in flange.<br />
Non locking 015.116<br />
£86.83 each | £75.50 ex VAT<br />
Locking version as shown 015.117<br />
£98.33 each | £85.50 ex VAT<br />
RUBBER GASKET<br />
Thicker than the st<strong>and</strong>ard one <strong>and</strong><br />
conical in shape.<br />
015.250 £8.05 each | £7.00 ex VAT<br />
CHROME ASTON LOCKING CAP<br />
A special version of the Aston filler cap<br />
which is beautifully made in brass <strong>and</strong><br />
chrome plated. It locks on to close the<br />
filler neck <strong>and</strong> is then removed in one<br />
piece to put the petrol in 015.197<br />
£81.47 each | £70.84 ex VAT<br />
Beautifully made in silver anodised aluminium, these caps grace the flanks of the world’s most exclusive high performance<br />
cars. They bolt to bodywork with funnel or direct to tank. Supplied with 1 gasket & plated nuts & bolts. This type of filler cap<br />
is particularly suitable for use in kit cars as it is flush mounting therefore complying with the S.V.A. Regulations.<br />
MINI<br />
MINI<br />
DOMED LOCKING CHROME PLATED<br />
For use with the original Mini tank pipe<br />
fittings where a push-in-<strong>and</strong>-twist-cap<br />
is normally used. It replaces the<br />
original cap. Chrome plated <strong>and</strong><br />
supplied with two keys. Overall<br />
diameter 80mm. Also fits MGA, MGB,<br />
MGC <strong>and</strong> Midget 015.371<br />
£18.34 each | £15.95 ex VAT<br />
FLANGED FUNNEL & GASKET<br />
For 51mm (2”) internal diameter hose<br />
015.118 £27.60 each | £24.00 ex VAT<br />
FLANGED FUNNEL & GASKET<br />
For 57mm (2 1 ⁄4”) internal diameter hose<br />
015.119 £28.75 each | £25.00 ex VAT<br />
15
16<br />
AIR FILTERS<br />
For 1 1 ⁄4 in SU carburettor HS<br />
<strong>and</strong> HS2 as used on Morris<br />
Minor 1000, MG Midget<br />
Mk I, II & III, Triumph<br />
Vitesse 1600, Spitfire Mk I,<br />
II, III, IV <strong>and</strong> 1500. It has SU<br />
stamped on it 015.161<br />
£50.08 each | £43.55 ex VAT<br />
For Aston Martin DB4 2”<br />
carburettor, colour black,<br />
no breather 015.423<br />
£27.60 each | £24.00 ex VAT<br />
For Austin Healey 2”<br />
carburettor, colour grey<br />
No breather 015.424<br />
£22.99 each | £19.99 ex VAT<br />
With breather 015.425<br />
£22.99 each | £19.99 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
For those of us who like to keep engine compartments original these air filters are made by the original manufacturer to suit<br />
the appropriate SU carburettor. They are supplied either with or without a breather stub pipe, as indicated<br />
For Austin Healey Sprite<br />
(Frog-eye) 1 1 ⁄8” carburettor,<br />
colour grey<br />
No breather 015.410<br />
£22.99 each | £19.99 ex VAT<br />
With breather 015.411<br />
£22.99 each | £19.99 ex VAT<br />
For Austin Healey 1 3 ⁄4”<br />
carburettor, colour grey<br />
No breather 015.151<br />
£22.99 each | £19.99 ex VAT<br />
With breather 015.419<br />
£22.99 each | £19.99 ex VAT<br />
SU CHROME AIR FILTERS<br />
For 1 1 ⁄2" SU carburettor H4,<br />
HD4 <strong>and</strong> HS4 as used on<br />
Austin Healey BJ7 Mk II,<br />
Mini 1275GT, MGB, MGB<br />
GT. It has SU stamped in it.<br />
015.162<br />
£50.08 each | £43.55 ex VAT<br />
For 1 3 ⁄4" SU carburettor. It<br />
has SU stamped on it.<br />
015.163<br />
£50.08 each | £43.55 ex VAT<br />
ORIGINAL AIR FILTERS<br />
For Austin Healey Sprite<br />
1 1 ⁄4” carburettor, colour grey<br />
No breather 015.412<br />
£22.99 each | £19.99 ex VAT<br />
With breather 015.413<br />
£22.99each | £19.99 ex VAT<br />
For Daimler SP250 1 3 ⁄4”<br />
carburettor, colour black,<br />
with breather pipe 015.420<br />
£27.60 each | £24.00 ex VAT<br />
For Austin Healey 1 1 ⁄2”<br />
carburettor, colour grey<br />
No breather 015.416<br />
£22.99 each | £19.99 ex VAT<br />
With breather 015.417<br />
£22.99 each | £19.99 ex VAT<br />
For Jaguar XK (Rear carb<br />
on RHD cars) 1 3 ⁄4“<br />
carburettor, colour black,<br />
no breather 015.421<br />
£27.60 each | £24.00 ex VAT<br />
For Jaguar C type Rear 2”<br />
carburettor, colour black,<br />
no breather 015.426<br />
£27.60 each | £24.00 ex VAT<br />
For 2” SU carburettor H8 &<br />
HD8 as used on Austin<br />
Healey BJ8 Mk III, Jaguar<br />
E Type 3.8 & 4.2, 420 4.2<br />
litre, 420G, XJ6 2.8, 3.4 &<br />
4.2, XJ12, Rover 2000TC.<br />
It has SU stamped on it.<br />
015.164<br />
£50.08 each | £43.55 ex VAT<br />
For Triumph TR2 1 1 ⁄2”<br />
carburettor, colour black,<br />
no breather 015.418<br />
£27.60 each | £24.00 ex VAT<br />
For Jaguar XK, Triumph<br />
TR3, TR4 1 3 ⁄4” carburettor,<br />
colour black, no breather<br />
015.422<br />
£27.60 each | £24.00 ex VAT<br />
For Jaguar C type Front 2”<br />
carburettor, colour black,<br />
no breather 015.427<br />
£27.60 each | £24.00 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk AIR FILTERS<br />
These air filters are pierced for a breather tube from the filter to the engine. A Breather Adaptor Kit is avialable which contains<br />
both the adaptor <strong>and</strong> a blanking grommet for use when the breather pipe is not required, for this refer to 015.439<br />
For SU 1 1 ⁄8” H1 015.429<br />
£15.53 each | £13.50 ex VAT<br />
A pair of chrome air filters<br />
for 1 3 ⁄4” SU carburettors H6,<br />
HD6 & HS6 as used on<br />
Austin Healey BJ7 Mk I,<br />
Rover 2200TC, Rover 3.5,<br />
3500, Triumph TR3, 3a, 4 &<br />
4a, MGC 015.434<br />
£28.75 per pair<br />
£25.00 ex VAT<br />
For 1 1 ⁄2” Stromberg 150CD<br />
carburettor as used on<br />
Triumph Herald 13/60,<br />
1300, Vitesse 1600 &<br />
2000, GT6, 2000 015.436<br />
£14.38 each | £12.50 ex VAT<br />
For 40mm Weber 40DCOE<br />
carburettor as used on<br />
Lotus Elan Sprint, +2<br />
(1967-8), +2S, S4, S4 S/E,<br />
+2S 130, +2S 130/5,<br />
Europa Twin Cam<br />
015.438<br />
£19.55 each | £17.00 ex VAT<br />
CHROME AIR FILTERS<br />
For SU 1 1 ⁄4“ H2/HS2 as used<br />
on Morris Minor 1000, MG<br />
Midget Mk I, II & III,<br />
Triumph Vitesse 1600,<br />
Spitfire Mk I, II, III, IV <strong>and</strong><br />
1500 015.430<br />
£14.38 each | £12.50 ex VAT<br />
For 1 1 ⁄2” SU carburettor H4,<br />
HD4 <strong>and</strong> HS4 with offset<br />
intake as used on Austin<br />
Healey 100 BN2, 100 BN4,<br />
Le Mans, 100S, 3000 Mk I,<br />
II & III, Mini Mk I, II, 850<br />
<strong>and</strong> 1000 Automatics<br />
015.433<br />
£14.38 each | £12.50 ex VAT<br />
For 1 3 ⁄4” Stromberg 175CD<br />
carburettor 015.428<br />
£15.53 each | £13.50 ex VAT<br />
Circular blank for own fitting<br />
135mm (5.3”) diameter x<br />
28mm (1.1”) thick. Back is<br />
blank to enable you to cut<br />
to suit your own carburettor<br />
015.502<br />
£19.55 each | £17.00 ex VAT<br />
For 1 1 ⁄4” SU carburettor HS &<br />
HS2 with offset intake. Used<br />
on Austin Healey Sprite Mk<br />
I, IIA, III & IV, Mini Mk I, II,<br />
850 & 1000, Cooper,<br />
Cooper S, 1275 Cooper,<br />
Mini 1275 & Clubman<br />
015.431<br />
£14.38 each | £12.50 ex VAT<br />
For 2” SU carburettor H8 &<br />
HD8 as used on Austin<br />
Healey BJ8 Mk III, Jaguar<br />
E Type 3.8 & 4.2, 420 4.2<br />
litre, 420G, XJ6 2.8, 3.4 &<br />
4.2, XJ12, Rover 2000TC<br />
015.435<br />
£19.55 each | £17.00 ex VAT<br />
For 1 3 ⁄4” Stromberg 175CD2<br />
carburettor as used on<br />
Triumph Stag, Jaguar E<br />
Type V12, Lotus Elan +2<br />
(1968-9), S4, Europa<br />
Special 015.437<br />
£14.38 each | £12.50 ex VAT<br />
Part circular blank 155mm<br />
(6.1”) diameter x 28mm<br />
(1.1”) thick. Flat on one side<br />
gives width of 132mm<br />
(5.2”). Back is blank to<br />
enable you to cut to suit<br />
your carburettor 015.503<br />
£19.55 each | £17.00 ex VAT<br />
For 1 1 ⁄2” SU carburettor H4,<br />
HD4 <strong>and</strong> HS4 as used on<br />
Austin Healey BJ7 Mk II,<br />
Mini 1275GT, MGB, MGB<br />
GT 015.432<br />
£14.39 each | £12.50 ex VAT<br />
For Solex <strong>and</strong> Zenith 52mm<br />
carburettors. With circular<br />
upst<strong>and</strong> to fit over carb.,<br />
this is 52mm internal dia.<br />
<strong>and</strong> is supplied with a worm<br />
drive hoseclip to make<br />
secure 015.500<br />
£19.55 each | £17.00 ex VAT<br />
For Autolite single choke<br />
carburettor Post 1970<br />
015.501<br />
£19.55 each | £17.00 ex VAT<br />
Breather adaptor kit<br />
contains breather adaptor<br />
& a blanking grommet for<br />
use where a breather pipe<br />
is not required on the air<br />
filters on this page 015.439<br />
£2.39 each | £2.08 ex VAT<br />
17
18<br />
GAUGES<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Founded as watchmakers in London in 1851, Smiths entered the motor instrument trade early on. The firm became S. Smith<br />
& Sons (Motor Accessories) Ltd in 1914, by which time it had made more than 50,000 speedometers <strong>and</strong> was employing 400<br />
workers at its Cricklewood, London factory. By 1927 Smiths had become a household name in the motor accessory field <strong>and</strong><br />
at the 1965 Earls Court Motor Show had six different st<strong>and</strong>s to display its products: Radiomobile radios, British Jaegar<br />
instruments, Lodge plugs, KLG plugs, Smiths heaters <strong>and</strong>, of course, Smiths gauges. Smiths had become the main source<br />
of gauges for British cars in the classic period but sadly their fortunes declined in parallel with the decline of automotive<br />
manufacturing in the United Kingdom. But all is not lost because manufacture continues in a small way in the United Kingdom<br />
from which we are able to offer a selection of Smiths gauges. These classic gauges are genuine Smiths designed gauges,<br />
skillfully crafted to the original drawings <strong>and</strong> specifications, using the original tools <strong>and</strong> dies<br />
TACHOMETER<br />
0–7,000 rpm. Black dial 070.001<br />
£131.54 each | £114.38 ex VAT<br />
SMITHS CLASSIC GAUGES<br />
100mm SMITHS CLASSIC GAUGES TECHNICAL INFORMATION<br />
CLASSIC TACHOMETER<br />
104mm<br />
diameter<br />
over rim<br />
Metal<br />
‘Can’<br />
98mm<br />
diameter<br />
Depth<br />
over studs<br />
72mm for 070.001, 070.051 <strong>and</strong> 60mm for 070.420<br />
A Supplied with ‘O’ Ring<br />
B Socket for electrical connection, this includes the<br />
illumination. A harness is provided with five free end<br />
wires to connect to your vehicle’s electrical system. The<br />
harness incorporates a switch which is used to set the<br />
number of cylinders<br />
C Two studs with bracket <strong>and</strong> thumb nuts for fitting<br />
A<br />
B<br />
C<br />
104mm<br />
diameter<br />
over rim<br />
100mm SMITHS CLASSIC TACHOMETERS<br />
The nominal diameter is 100mm, there is a choice of black or magnolia dial. They connect to the contact breaker on your<br />
12 volt distributor <strong>and</strong> are switchable for 4, 6 or 8 cylinder engines (easy instructions provided). Suitable for 12 volt<br />
NEGATIVE Earth only<br />
TACHOMETER<br />
0–7,000 rpm. Magnolia dial with full V<br />
chrome rim 070.051<br />
£136.07 each | £118.32 ex VAT<br />
CLASSIC SPEEDOMETERS<br />
Metal ‘Can’<br />
98mm<br />
diameter<br />
Depth over studs 104mm<br />
A Supplied with ‘O’ Ring<br />
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)<br />
C Trigger cable fitting. This is the normal push on fitting<br />
found on many classic cars. The boss is 16mm diameter<br />
D Two studs with clamps <strong>and</strong> thumb nuts for fitting<br />
TACHOMETER<br />
0–8,000 rpm. Black dial with full V<br />
chrome rim 070.420<br />
£154.05 each | £133.96 ex VAT<br />
A<br />
B<br />
C<br />
D
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
The nominal diameter is 100mm, there is a choice of black or magnolia dial. They have a mileage or kilometre reading <strong>and</strong><br />
a trip reading with the trip reset on the front of the gauge. They connect to your gearbox using the existing cable provided it<br />
has the correct end fitting. These speedometers will need calibrating.<br />
SPEEDOMETER<br />
Reads to 140 mph. Black dial.<br />
070.004(140)<br />
£170.25 each | £148.04 ex VAT<br />
SPEEDOMETER<br />
Reads to140 mph. Magnolia dial<br />
070.361<br />
£175.12 each | £152.28 ex VAT<br />
100mm ‘O’ RING<br />
Spare ‘O’ ring for 100mm<br />
gauges. This ‘O’ Ring fits<br />
between the bezel <strong>and</strong> the<br />
dashboard. 070.042<br />
£0.81 each | £0.70 ex VAT<br />
100mm SMITHS CLASSIC SPEEDOMETERS<br />
SPEEDOMETER<br />
Reads to170 mph. Black dial.<br />
070.004<br />
£170.25 each | £148.04 ex VAT<br />
SPEEDOMETER<br />
Reads to170 mph. Magnolia dial<br />
070.054<br />
£175.12 each | £152.28 ex VAT<br />
100mm SMITHS CLASSIC SPARES<br />
100mm FULL V RIM<br />
Full V rim for 100mm<br />
gauges. Rims can be<br />
changed which involves<br />
bending over the retaining<br />
tabs. This enables you to<br />
change the rim on a gauge<br />
from black to chrome etc.<br />
Black 070.155<br />
£6.44 each | £5.60 ex VAT<br />
Chrome 070.156<br />
£7.36 each | £6.40 ex VAT<br />
100mm HALF V RIM<br />
Half V rim for 100mm<br />
gauges. Rims can be<br />
changed which involves<br />
bending over the retaining<br />
tabs. This enables you to<br />
change the rim on a gauge<br />
from black to chrome etc.<br />
Black 070.149<br />
£6.44 each | £5.60 ex VAT<br />
Chrome 070.150<br />
£7.36 each | £6.40 ex VAT<br />
KPH SPEEDOMETER<br />
Reads to 260 kph. Black dial<br />
070.005<br />
£170.25 each | £148.04 ex VAT<br />
KPH SPEEDOMETER<br />
Reads to 260 kph. Magnolia dial<br />
070.055<br />
£175.12 each | £152.28 ex VAT<br />
BULB HOLDER<br />
For Smiths <strong>Classic</strong> gauges<br />
070.038<br />
£3.52 each | £3.06 ex VAT<br />
Capless 12 volt bulb of 2.2<br />
watts as used in Smiths<br />
gauges LLB510<br />
£1.14 each | £0.99 ex VAT<br />
19
20<br />
GAUGES<br />
90mm<br />
diameter<br />
over rim<br />
SPEEDOMETER<br />
Reads to 140 mph. Black dial 070.136<br />
£166.47 each | £144.76 ex VAT<br />
80mm SMITHS CLASSIC SPEEDOMETERS<br />
SPEEDOMETER<br />
Reads to 140 mph. Magnolia dial<br />
070.176<br />
£171.14 each | £148.82 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
80mm SMITHS CLASSIC GAUGES TECHNICAL INFORMATION<br />
CLASSIC SPEEDOMETERS<br />
Metal ‘Can’<br />
80mm<br />
diameter<br />
Depth over studs 101mm<br />
A Supplied with ‘O’ Ring<br />
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)<br />
C SAE screw cable fittting is the normal threaded fitting<br />
found on many classic cars. The thread is 16mm diameter<br />
D Two studs with clamps <strong>and</strong> thumb nuts for fitting<br />
360mm long<br />
Flexline remote trip reset supplied with each gauge. Fits<br />
into hole in back of gauge. Requires 10 mm diameter hole<br />
at the reset button end<br />
A<br />
B<br />
C<br />
D<br />
CLASSIC TACHOMETER<br />
90mm<br />
diameter<br />
over rim<br />
Metal ‘Can’<br />
80mm<br />
diameter<br />
Depth over studs 75mm<br />
A Supplied with ‘O’ Ring<br />
B Two studs with bracket <strong>and</strong> thumb nuts for fitting<br />
C Socket for electrical connection, this includes the<br />
illumination. A harness is provided for connecting three<br />
free end wires to your vehicle’s electrical system<br />
These gauges are calibrated for the number of cylinders in<br />
your engine by setting a combination of 4 switches found<br />
by removing the rubber plug at the rear. Instructions are<br />
provided.<br />
The nominal diameter is 80mm, there is a choice of black or magnolia dial. They have a mileage or kilometre reading <strong>and</strong> a<br />
trip reading with a remote trip reset. They connect to your gearbox using the existing cable provided it has the correct end<br />
fitting. These speedometers will need calibrating.<br />
KPH SPEEDOMETER<br />
Reads to 240 kph. Black Dial 070.137<br />
£166.47 each | £144.76 ex VAT<br />
A<br />
B<br />
C
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
The nominal diameter is 80mm, there is a choice of black or magnolia dial. They connect to the contact breaker on your 12<br />
volt distributor <strong>and</strong> are switchable for 4, 6 or 8 cylinder engines (easy instructions provided). Some have an additional h<strong>and</strong><br />
(Max H<strong>and</strong>) with which you can mark the maximum r.p.m. you wish to use on any particular journey or event. Popular for<br />
competition work. Sutable for 12 volt NEGATIVE Earth only<br />
TACHOMETER<br />
0 – 7,000 rpm. Black dial 070.034<br />
£125.58 each | £109.20 ex VAT<br />
TACHOMETER<br />
0 – 7,000 rpm. Magnolia dial 070.045<br />
£130.73 each £113.68 ex VAT<br />
80mm ‘O’ RING<br />
Spare ‘O’ ring for 80mm<br />
gauges. This ‘O’ Ring fits<br />
between the bezel <strong>and</strong> the<br />
dashboard. 070.041<br />
£0.81 each | £0.70 ex VAT<br />
80mm SMITHS CLASSIC TACHOMETERS<br />
MAX HAND TACHOMETER<br />
0 – 8,000 rpm. Black dial 070.130<br />
£132.69 each £115.38 ex VAT<br />
MAX HAND TACHOMETER<br />
0 – 8,000 rpm. Magnolia dial 070.132<br />
£137.47 each | £119.54 ex VAT<br />
80mm SMITHS CLASSIC SPARES<br />
80mm HALF V RIM<br />
BLACK<br />
Half V rim for 100mm<br />
gauges. Rims can be<br />
changed which involves<br />
bending over the retaining<br />
tabs. This enables you to<br />
change the rim on a gauge<br />
from black to chrome etc.<br />
070.147<br />
£5.98 each | £5.20 ex VAT<br />
80mm HALF V RIM<br />
CHROME<br />
Half V rim for 100mm<br />
gauges. Rims can be<br />
changed which involves<br />
bending over the retaining<br />
tabs. This enables you to<br />
change the rim on a gauge<br />
from black to chrome etc.<br />
070.148<br />
£6.35 each | £5.52ex VAT<br />
MAX HAND TACHOMETER<br />
0 –10,000 rpm. Black dial 070.133<br />
£132.69 each £115.38 ex VAT<br />
MAX HAND TACHOMETER<br />
0 –10,000 rpm. Magnolia dial 070.135<br />
£137.47 each | £119.54 ex VAT<br />
BULB HOLDER<br />
With leads for Smiths<br />
classic gauges 070.037<br />
£3.52 each | £3.05 ex VAT<br />
Capless 12 volt bulb of 2.2<br />
watts as used in Smiths<br />
classic gauges LLB510<br />
£1.14 each | £0.99 ex VAT<br />
MORE MATCHING CLASSIC GAUGES ON FOLLOWING PAGES<br />
21
22<br />
GAUGES<br />
TYPICAL MECHANICAL OIL<br />
PRESSURE GAUGE<br />
56mm<br />
diameter<br />
over rim<br />
Metal ‘Can’<br />
52mm<br />
diameter<br />
Depth over stud 69mm<br />
*Mechanical temperature <strong>and</strong> dual gauges have a capilliary<br />
1980mm long (78”) <strong>and</strong> bulb for temperature measurement<br />
A Supplied with ‘O’ Ring<br />
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)<br />
C Oil pressure fitting, see page 33<br />
D Studs with brackets <strong>and</strong> thumb nuts for fitting<br />
A<br />
B<br />
C<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
52mm SMITHS CLASSIC GAUGES TECHNICAL INFORMATION<br />
CLOCK<br />
Electrical 070.021<br />
£73.46 each | £63.88 ex VAT<br />
WATER TEMPERATURE*<br />
Mechanical. 30–110°C<br />
070.014<br />
£89.31 each | £77.66 ex VAT<br />
Mechanical 0-100 lb/sq”<br />
30–110°C 070.018<br />
£113.21 each | £98.44 ex VAT<br />
D<br />
TYPICAL ELECTRICAL GAUGE<br />
56mm<br />
diameter<br />
over rim<br />
Metal<br />
‘Can’<br />
52mm<br />
diameter<br />
Depth over stud 73mm<br />
Except for ammeters <strong>and</strong> voltmeters you will need a sender<br />
to work with each electrically operated gauge. Please refer<br />
to page 32<br />
A Supplied with ‘O’ Ring<br />
B Two terminals, normally 6.4mm Lucar but ammeters have<br />
9.5mm Lucar terminals<br />
C Stud with bracket <strong>and</strong> thumb nut for fitting<br />
D Bulb <strong>and</strong> bulbholder fitted for 12 volt illumination (2 wires)<br />
52mm SMITHS CLASSIC FULL SCALE GAUGES<br />
CLOCK<br />
Electrical 070.065<br />
£76.68 each | £66.68 ex VAT<br />
WATER TEMPERATURE*<br />
Mechanical. 30–110°C<br />
070.063<br />
£96.09 each | £83.56 ex VAT<br />
OIL PRESSURE<br />
Mechanical. 0–100 lb/sq”<br />
070.068<br />
£65.46 each | £56.92 ex VAT<br />
OIL TEMPERATURE*<br />
Mechanical. 40–140°C<br />
070.028<br />
£89.31 each | £77.66 ex VAT<br />
DUAL OIL PRESSURE & WATER TEMPERATURE*<br />
Mechanical 0-100 lb/sq”<br />
90–230°F 070.129<br />
£107.57 each | £93.54 ex VAT<br />
Mechanical 0-60 lb/sq”<br />
30–110˚C 070.029<br />
£107.67 each | £93.54 ex VAT<br />
A<br />
B<br />
C<br />
D<br />
OIL PRESSURE<br />
Mechanical. 0–100 lb/sq”<br />
070.057<br />
£68.95 each | £59.96 ex VAT<br />
OIL TEMPERATURE*<br />
Mechanical. 40–140°C<br />
070.059<br />
£96.09 each | £83.56 ex VAT<br />
Mechanical 0–100 lb/sq”,<br />
90-230°F 070.064<br />
£110.12 each | £95.76 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
52mm SMITHS CLASSIC QUADRANT GAUGES & 52mm SPARES<br />
OIL PRESSURE<br />
Electrical. 0–100 lb/sq”<br />
070.006<br />
£37.12 each | £32.28 ex VAT<br />
OIL TEMPERATURE<br />
Electrical. 50–140°C<br />
070.008<br />
£37.12 each | £32.28 ex VAT<br />
FUEL GAUGE<br />
Electrical, 0– 1 ⁄2– 4 ⁄4 070.010<br />
£37.12 each | £32.28 ex VAT<br />
VOLTS<br />
10–15 volts 070.009<br />
£37.75 each | £32.83 ex VAT<br />
52mm FULL V RIM<br />
Full V rim for 52mm gauges.<br />
Rims can be changed<br />
which involves bending<br />
over the retaining tabs. This<br />
enables you to change the<br />
rim on a gauge from black<br />
to chrome etc.<br />
Black 070.151<br />
£4.37 each | £3.80 ex VAT<br />
Chrome 070.152<br />
£5.47 each | £4.75 ex VAT<br />
OIL PRESSURE<br />
Electrical. 0–100 lb/sq”<br />
070.056<br />
£40.11 each | £34.88 ex VAT<br />
OIL TEMPERATURE<br />
Electrical. 50–140°C<br />
070.058<br />
£40.11 each | £34.88 ex VAT<br />
FUEL GAUGE<br />
Electrical 0– 1 ⁄2– 4 ⁄4 070.061<br />
£40.11 each | £34.88 ex VAT<br />
VOLTS<br />
10–15 volts 070.060<br />
£40.11 each | £34.88 ex VAT<br />
52mm HALF V RIM<br />
Half V rim for 52mm<br />
gauges. Rims can be<br />
changed which involves<br />
bending over the retaining<br />
tabs. This enables you to<br />
change the rim on a gauge<br />
from black to chrome etc.<br />
Black 070.145<br />
£4.37 each | £3.80 ex VAT<br />
Chrome 070.146<br />
£5.47 each | £4.75 ex VAT<br />
OIL PRESSURE<br />
Mechanical. 0–100 lb/sq”<br />
070.007<br />
£63.32 each | £55.06 ex VAT<br />
WATER TEMPERATURE<br />
Electrical. 50–140°C<br />
070.013<br />
£37.12 each | £32.28 ex VAT<br />
AMMETER<br />
–60 to +60 amps 070.022<br />
£37.12 each | £32.28 ex VAT<br />
–30 to +30 amps 070.079<br />
£37.12 each | £32.28 ex VAT<br />
OIL PIPE FOR<br />
MECHANICAL GAUGES<br />
1.5 metres long 070.024<br />
£7.48 each | £6.50 ex VAT<br />
3.0 metres long 070.025<br />
£14.89 each | £12.95 ex VAT<br />
AMMETER BULB HOLDER<br />
For Smiths <strong>Classic</strong><br />
Ammeters only 070.069<br />
£1.50 each | £1.30 ex VAT<br />
Single contact Bayonet<br />
bulb for Ammeter 12 volts &<br />
4 watts. BA9s cap LLB233<br />
£0.81 each | £0.70 ex VAT<br />
OIL PRESSURE<br />
Mechanical. 0–100 lb/sq”<br />
070.067<br />
£66.61 each | £57.92 ex VAT<br />
WATER TEMPERATURE<br />
Electrical. 50–140°C<br />
070.062<br />
£40.11 each | £34.88 ex VAT<br />
AMMETER<br />
–60 to +60 amps 070.066<br />
£40.11 each | £34.88 ex VAT<br />
–30 to +30 amps 070.166<br />
£40.11 each | £34.88 ex VAT<br />
52mm ‘O’ RING<br />
Spare ‘O’ ring for 52mm<br />
gauges. This ‘O’ Ring fits<br />
between the bezel <strong>and</strong> the<br />
dashboard. 070.041<br />
£0.81 each | £0.70 ex VAT<br />
BULB HOLDER<br />
With leads for Smiths<br />
classic gauges 070.037<br />
£3.52 each | £3.05 ex VAT<br />
Capless 12 volt bulb of 2.2<br />
watts as used in Smiths<br />
classic gauges LLB510<br />
£1.14 each | £0.99 ex VAT<br />
23
24<br />
GAUGES<br />
120 mm 120 mm<br />
SPEEDOMETER<br />
Reads 0-140mph. 120mm (5”) diameter with full V chrome<br />
bezel, white figures on a black dial. Electronic operation.<br />
With 12 volt illumination. Requires hole size 120mm<br />
diameter. Depth over fixing studs 77mm 070.421<br />
£229.43 each | £199.50 ex VAT<br />
100 mm<br />
SPEEDOMETER MPH<br />
Electronic, negative earth. Reads to<br />
200 mph 070.440<br />
£174.50 each | £151.74 ex VAT<br />
FUEL GAUGE<br />
E- 1 ⁄2-F 070.446<br />
£48.32 each | £42.02 ex VAT<br />
For Senders see page 34<br />
120mm SMITHS CLASSIC GAUGES<br />
52 mm<br />
OIL TEMPERATURE<br />
Mechanical, 40 to 140˚C. 3,048mm<br />
(120”) capillary length 070.447<br />
£102.40 each | £89.04 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
TACHOMETER<br />
Reads 0–7,000 rpm. 120mm diameter with full V chrome<br />
bezel, white figures on a black dial reading to 7000 rpm.<br />
Operates electronically from 12 volts <strong>and</strong> can be switched<br />
for 4, 6 or 8 cylinder engines. With 12 volt illumination.<br />
Requires hole size 120mm diameter. Depth over fixing studs<br />
77mm 070.422 £221.79 each | £192.86 ex VAT<br />
SMITHS CLASSIC GAUGES FOR GT40’S<br />
100 mm<br />
52 mm 52 mm 52 mm<br />
OIL PRESSURE<br />
Mechanical. 0-100 lb/sq” 070.443<br />
£76.31 each | £66.36 ex VAT<br />
52 mm<br />
Made with the original tooling, <strong>and</strong> as fitted to the original classic GT40<br />
100 mm<br />
SPEEDOMETER KPH<br />
Electronic, negative earth. Reads to<br />
325 kph (outer scale) & 200 mph<br />
(inner scale) 070.441<br />
£174.50 each | £151.74 ex VAT<br />
WATER TEMPERATURE<br />
Mechanical, 30 to 120˚C. 3048mm<br />
(120”) capillary length 070.444<br />
£105.36 each | £91.62 ex VAT<br />
TACHOMETER<br />
Electrical, negative earth. Reads to<br />
8,000 rpm. Switchable for 4, 6 or 8<br />
cylinders 070.442<br />
£166.64 each | £144.90 ex VAT<br />
AMMETER<br />
–50 to +50 070.445<br />
£40.00 each | £34.78 ex VAT<br />
(Use connector kit 080.134)
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
These two 60mm clocks have not been available for well over thirty years! These quartz clocks will directly replace the Smiths<br />
mechanical clocks of the ‘50s <strong>and</strong> ’60s - your car can now have a working clock as opposed to one ‘just for show’!<br />
60 mm<br />
SMITHS CLASSIC 60MM CLOCK<br />
12V 60mm clock with black numbers on magnolia dial <strong>and</strong><br />
a full V bezel. Has flexible link to push button switch used<br />
for setting 070.409 £149.50 each | £130.00 ex VAT<br />
125 mm<br />
SMITHS CLASSIC GAUGES FOR CLASSIC MINIS<br />
BLACK DIAL SPEEDOMETER<br />
For Mini, reads to 90 mph 070.100<br />
£156.86 each | £136.40 ex VAT<br />
For Mini, reads to 140 kph 070.101<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 130 mph<br />
070.102<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 200 kph<br />
070.103<br />
£156.86 each | £136.40 ex VAT<br />
52 mm 52 mm<br />
OIL PRESSURE<br />
Mechanical, 0 to 100 p.s.i.:<br />
Black dial 070.112<br />
£59.52 each | £51.76 ex VAT<br />
White dial 070.113<br />
£61.89 each | £53.82 ex VAT<br />
Magnolia dial 070.114<br />
£61.89 each | £53.82 ex VAT<br />
60mm SMITHS CLASSIC GAUGES<br />
Made with the original tooling, <strong>and</strong> as fitted to the original classic MINI<br />
WHITE DIAL SPEEDOMETER<br />
For Mini, reads to 90 mph 070.104<br />
£156.86 each | £136.40 ex VAT<br />
For Mini, reads to 140 kph 070.105<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 130 mph<br />
070.106<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 200 kph<br />
070.107<br />
£156.86 each | £136.40 ex VAT<br />
WATER TEMPERATURE<br />
Electrical, C N H:<br />
Black dial 070.115<br />
£40.11 each | £34.88 ex VAT<br />
White dial 070.116<br />
£40.11 each | £34.88 ex VAT<br />
Magnolia dial 070.117<br />
£42.60 each | £37.04 ex VAT<br />
60 mm<br />
Picture coming<br />
soon<br />
SMITHS CLASSIC 60MM CLOCK<br />
12V 60mm clock with white numbers on black dial <strong>and</strong> a 1 ⁄2V<br />
bezel. Has flexible link to push button switch used for<br />
setting. Used by Jaguar, Aston Martin, Rootes group,<br />
many ‘60s cars. 070.408 £149.50 each | £130.00 ex VAT<br />
52 mm 52 mm<br />
CLOCK<br />
Electrical 070.021<br />
£73.46 each | £63.88 ex VAT<br />
Picture coming<br />
soon<br />
MAGNOLIA DIAL SPEEDOMETER<br />
For Mini, reads to 90 mph 070.108<br />
£156.86 each | £136.40 ex VAT<br />
For Mini, reads to 140 kph 070.109<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 130 mph<br />
070.110<br />
£156.86 each | £136.40 ex VAT<br />
For Mini Cooper, reads to 200 kph<br />
070.111<br />
£156.86 each | £136.40 ex VAT<br />
CLOCK<br />
Electrical 070.065<br />
£76.68 each | £66.68 ex VAT<br />
25
26<br />
GAUGES<br />
100 mm<br />
TACHOMETER<br />
Electrical, reads to 8,000 rpm 070.121<br />
£166.64 each | £144.90 ex VAT<br />
52 mm<br />
FUEL GAUGE<br />
0– 1 ⁄2–F 070.126<br />
£48.32 each | £42.02 ex VAT<br />
For sender use 070.011,<br />
070.012 or 070.091<br />
52 mm<br />
SMITHS AMMETER<br />
–50 to +50 070.125<br />
£40.00 each | £34.78 ex VAT<br />
SMITHS CLASSIC GAUGES FOR COBRAS<br />
Made with the original tooling, <strong>and</strong> as fitted to the original classic COBRA<br />
52 mm<br />
ANTICLOCKWISE SPEEDOMETER<br />
180 mph with remote trip reset. SAE<br />
screw cable 070.120<br />
£185.56 each | £161.36 ex VAT<br />
WATER TEMPERATURE<br />
Mechanical, 40 to 140˚C,<br />
1,980 mm (78”) capillary<br />
length 070.123<br />
£98.76 each | £85.88 ex VAT<br />
52 mm<br />
100 mm<br />
LUCAS AMMETER<br />
–50 to +50 070.244<br />
£40.00 each | £34.78 ex VAT<br />
52 mm<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
OIL TEMPERATURE<br />
Mechanical, 40 to 140˚C,<br />
1,980 mm (78”) capillary<br />
length 070.124<br />
£98.76 each | £85.88 ex VAT<br />
52 mm<br />
100 mm<br />
FUEL PRESSURE GAUGE<br />
0–10lb/sq”, 1 ⁄8” x 28BSP<br />
070.243<br />
£76.31 each | £66.36 ex VAT<br />
FUEL TANK SENDER<br />
As supplied to AC cars right up to <strong>and</strong> including the Mk 4. It fits to the top of the tank.<br />
Resistor box fits to a vertical rod <strong>and</strong> can be adjusted to the correct position for the pivot.<br />
Rod can then be cut to length. The float fits to the float arm <strong>and</strong> can be adjusted to the<br />
required position. Flange is 5 hole fitting. Comes with full instructions. Functions with gauges<br />
070.305 <strong>and</strong> 070.335 (not 070.126) 070.078 £36.00 each | £31.30 ex VAT<br />
SPEEDOMETER<br />
Electrical, reads to 160 mph 070.242<br />
£185.56 each | £161.36 ex VAT<br />
52 mm<br />
SMITHS CLASSIC GAUGE SPARES FOR COBRAS<br />
OIL PRESSURE<br />
Mechanical, 0–100 lb/sq”<br />
070.122<br />
£76.31 each | £66.36 ex VAT<br />
REVERSE<br />
WIND GEARBOX<br />
For reversing the rotation of<br />
the cable, If you are going<br />
to use the anticlockwise<br />
speedometer 070.188<br />
£50.90 each | £44.26 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
THERMOMETER<br />
Small, waterproof, shock resistant on<br />
board thermometer measuring air<br />
temperature in degrees F with<br />
degrees C around the outside. Fully<br />
encapsulated <strong>and</strong> liquid filled. Fits to<br />
any 6mm to 8mm ( 1 ⁄4") bolt or screw on<br />
your motorcycle.<br />
070.403 £35.22 each | £30.36 ex VAT<br />
52 mm<br />
TACHOMETER<br />
Electrical. Switchable for 4, 6 or 8<br />
cylinder engines<br />
070.181 £46.85 each | £40.74 ex VAT<br />
Actual<br />
size<br />
Silver dial<br />
070.414 £22.72 each | £19.76 ex VAT<br />
THERMOMETER & CLOCKS<br />
52 mm<br />
CLOCK<br />
12V negative earth. Matches tacho on<br />
left<br />
070.180 £40.11 each | £34.88 ex VAT<br />
Actual<br />
size<br />
White dial<br />
070.407 £22.72 each | £19.76 ex VAT<br />
GAUGES<br />
SMITHS CLOCK<br />
12V negative earth<br />
070.139 £73.46 each | £63.88 ex VAT<br />
WATERPROOF CLOCKS<br />
Waterproof, shock resistant Clocks containing a long lasting button-cell battery <strong>and</strong> quality movement. Comes complete with<br />
a mounting bracket for fitting using a 6mm to 8mm ( 1 ⁄4") bolt or screw. 45mm diameter<br />
45 mm<br />
Luminous dial<br />
070.402 £35.22 each | £30.63 ex VAT<br />
45 mm<br />
White dial<br />
070.401 £35.22 each | £30.63 ex VAT<br />
52 mm<br />
Black dial<br />
070.400 £29.35 each | £25.52 ex VAT<br />
ADHESIVE CLOCKS<br />
Small, waterproof, shock resistant Clocks containing a long lasting button-cell battery <strong>and</strong> quality movement. With rotating<br />
bezel. Mount it anywhere - it sticks to anything. 22mm diameter<br />
22 mm<br />
37 mm<br />
NIGHT VIEWING CLOCK<br />
Tough stainless steel case, white face<br />
<strong>and</strong> luminous h<strong>and</strong>s. For viewing in<br />
the dark it has a luminescent backlit<br />
dial. With a button cell battery that<br />
should last 3 years. Shock <strong>and</strong> water<br />
resistant. Supplied with small bracket<br />
<strong>and</strong> two Allen screws <strong>and</strong> key. Shock<br />
<strong>and</strong> water resistant.<br />
070.415 £48.92 each | £42.54 ex VAT<br />
22 mm<br />
ELECTRONIC SPEEDOMETER/CLOCK<br />
An accurate speedo that doubles as a<br />
clock <strong>and</strong> has multiple functions such<br />
as trip meter, distance, stopwatch,<br />
average speed readout <strong>and</strong> maximum<br />
speed recall, all in mph (up to<br />
183mph) or kph (up to 300kph) <strong>and</strong> is<br />
accurate to 1/100th of a mile.<br />
070.384 £32.25 each | £28.04 ex VAT<br />
Wireless upgrade, this replaces the<br />
cable link from forks to h<strong>and</strong>lebars by<br />
a wireless sender & receiver.<br />
070.389 £17.61 each | £15.31 ex VAT<br />
45 mm<br />
22 mm<br />
Actual<br />
size<br />
Black dial<br />
070.406 £22.72 each | £19.76 ex VAT<br />
27
28<br />
GAUGES<br />
52mm TURBO BOOST<br />
(MECHANICAL)<br />
–1 to 1.5 bar 070.312<br />
£47.08 each | £40.94 ex VAT<br />
52mm VOLTMETER<br />
9 to 17 volts 070.313<br />
£30.45 each | £26.48 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
A technically advanced range of slim instruments with crisp white graphics on black dials <strong>and</strong> full V chrome bezels.<br />
All are illuminated <strong>and</strong> 12 volt negative earth.<br />
100mm ELECTRONIC SPEEDOMETERS<br />
Programmable by the user to suit individual cars. They also<br />
feature an electronic digital odometer to record distance<br />
which has a resettable trip function on the front of the<br />
speedometer. 100mm nominal diameter<br />
180 mph Speedometer<br />
070.300<br />
£152.58 each<br />
£132.68 ex VAT<br />
52mm AMMETER<br />
–60 to +60 amps 070.303<br />
£30.45 each | £ 26.48 ex VAT<br />
52mmOIL PRESSURE<br />
(MECHANICAL)<br />
0–10 bar 070.308<br />
£47.08 each | £40.94 ex VAT<br />
280 kph Speedometer<br />
070.301<br />
£152.58 each<br />
£132.68 ex VAT<br />
ECLIPSE GAUGES<br />
52mm FUEL<br />
0–1/2–1. Use with Fuel Tank<br />
Sender 070.078 070.305<br />
£30.45 each | £ 26.48 ex VAT<br />
52mm OIL TEMP<br />
(ELECTRICAL)<br />
50–150°C 070.309<br />
£30.45 each | £ 26.48 ex VAT<br />
100mm TACHOMETER<br />
Connects to the contact<br />
breaker on your 12 volt<br />
distributor & switchable for<br />
4, 6 or 8 cylinder engines.<br />
100mm nominal diameter<br />
Reads to 8,000 rpm<br />
070.302<br />
£118.84 each<br />
£103.34 ex VAT<br />
52mmFUEL PRESSURE<br />
0–2 bar. It will need to be<br />
piped into the fuel line on<br />
your car 070.306<br />
£47.08 each | £40.94 ex VAT<br />
52mm OIL TEMP<br />
(MECHANICAL))<br />
50–150°C 070.310<br />
£64.42 each | £56.02 ex VAT<br />
52mm WATER TEMP<br />
(ELECTRICAL)<br />
40–120°C. Use with temp<br />
sensor 070.320 070.314<br />
£30.45 each | £26.48 ex VAT<br />
CLOCK<br />
52mm diameter, 12 volt<br />
negative earth & illuminated<br />
070.304<br />
£68.68 each | £59.72 ex VAT<br />
52mm OIL PRESSURE<br />
(ELECTRICAL)<br />
0–10 bar. Use with Pressure<br />
Sensor 070.318 070.307<br />
£30.45 each | £ 26.48 ex VAT<br />
52mm TRANSMISSION<br />
OIL TEMP<br />
50–150°C. Use with temp<br />
sensor 070.319 070.311<br />
£30.45 each | £26.48 ex VAT<br />
52mmWATER TEMP<br />
(MECHANICAL)<br />
40–150°C 070.315<br />
£64.42 each | £56.02 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
TELEMETRIX GAUGES<br />
A technically advanced range of slim instruments with crisp black graphics on magnolia dials <strong>and</strong> with small bezels. All are<br />
illuminated <strong>and</strong> 12 volt negative earth.<br />
100mm ELECTRONIC SPEEDOMETERS<br />
Programmable by the user to suit individual cars. They also<br />
feature an electronic digital odometer to record distance<br />
which has a resettable trip function on the front of the<br />
speedometer. 100mm nominal diameter<br />
Reads to 180 mph<br />
070.330<br />
£160.61 each<br />
£139.66 ex VAT<br />
52mm FUEL<br />
0–1/2–1. Use with Fuel Tank<br />
Sender 070.078 070.335<br />
£31.72 each | £27.58 ex VAT<br />
52mm OIL TEMP<br />
(ELECTRICAL)<br />
50–150°C 070.339<br />
£31.72 each | £27.58 ex VAT<br />
52mm VOLTMETER<br />
9 to 17 volts 070.343<br />
£31.72 each | £27.58 ex VAT<br />
Reads to 280 kph<br />
070.331<br />
£160.61 each<br />
£139.66 ex VAT<br />
52mm FUEL PRESSURE<br />
0–2 bar. It will need to be<br />
piped into the fuel line on<br />
your car 070.336<br />
£48.42 each | £42.10 ex VAT<br />
52mm OIL TEMP<br />
(MECHANICAL)<br />
50–150°C 070.340<br />
£61.16 each | £53.18 ex VAT<br />
52mm WATER TEMP<br />
(ELECTRICAL)<br />
40–120°C. Use with temp<br />
sensor 070.320 070.344<br />
£31.72 each | £27.58 ex VAT<br />
100mm TACHOMETER<br />
Connects to the contact<br />
breaker on your 12 volt<br />
distributor & switchable for<br />
4, 6 or 8 cylinder engines.<br />
100mm nominal diameter<br />
Reads to 8,000 rpm<br />
070.332<br />
£123.10 each<br />
£107.04 ex VAT<br />
52mm OIL PRESSURE<br />
(ELECTRICAL)<br />
0–10 bar. Use with Pressure<br />
Sensor 070.318 070.337<br />
£31.72 each | £27.58 ex VAT<br />
52mm TRANSMISSION<br />
OIL TEMP<br />
50–150°C. Use with temp<br />
sensor 070.319 070.341<br />
£31.72 each | £27.58 ex VAT<br />
52mm WATER TEMP<br />
(MECHANICAL)<br />
40–150°C 070.345<br />
£61.16 each | £53.18 ex VAT<br />
52mm CLOCK<br />
070.334<br />
£70.08 each | £60.94 ex VAT<br />
52mm AMMETER<br />
–60 to +60 amps 070.333<br />
£31.72 each | £27.58 ex VAT<br />
52mm OIL PRESSURE<br />
(MECHANICAL)<br />
0–10 bar 070.338<br />
£48.42 each | £42.10 ex VAT<br />
52mm TURBO BOOST<br />
(MECHANICAL)<br />
–1 to 1.5 bar 070.342<br />
£48.42 each | £42.10 ex VAT<br />
52mm DUAL<br />
(MECHANICAL)<br />
Oil 0–100 p.s.i., Water<br />
90–230°F 070.346<br />
£93.86 each | £81.62 ex VAT<br />
29
30<br />
GAUGES<br />
ELECTRONIC SPEEDOMETERS<br />
56mm<br />
diameter<br />
over rim<br />
56mm<br />
diameter<br />
over rim<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
100mm ECLIPSE & TELEMETRIX GAUGES TECHNICAL INFO<br />
104mm<br />
diameter<br />
over rim<br />
Metal<br />
‘Can’<br />
98.5mm<br />
diameter<br />
Depth over<br />
studs 75mm<br />
A Supplied with ‘O’ Ring<br />
B Socket for electrical connection, this includes the<br />
illumination. A harness is provided for connecting to your<br />
vehicle’s electrical system <strong>and</strong> to the sensor (see page<br />
31). Instructions are supplied<br />
C Two studs with bracket <strong>and</strong> thumb nuts for fitting<br />
Plastic ‘Can’<br />
52mm<br />
diameter<br />
Depth over<br />
studs 61mm<br />
A<br />
B<br />
C<br />
ELECTRONIC TACHOMETERS<br />
104mm<br />
diameter<br />
over rim<br />
Metal<br />
‘Can’<br />
98.5mm<br />
diameter<br />
MECHANICAL OIL<br />
PRESSURE GAUGES<br />
Metal<br />
‘Can’<br />
52mm<br />
diameter<br />
Depth over<br />
studs 75mm<br />
A Supplied with ‘O’ Ring<br />
B Socket for electrical connection, this includes the<br />
illumination. A harness is provided for connecting three<br />
free wires to your vehicle’s electrical system<br />
C Two studs with bracket <strong>and</strong> thumb nuts for fitting<br />
Tachometers are calibrated for the number<br />
of cylinders in your engine by setting a<br />
combination of 4 switches found by<br />
removing the rubber plug at the rear.<br />
Instructions are provided.<br />
52mm ECLIPSE & TELEMETRIX GAUGES TECHNICAL INFO<br />
TYPICAL ELECTRICAL GAUGES<br />
A Supplied with ‘O’ Ring<br />
B Studs with brackets <strong>and</strong> thumb nuts for fitting<br />
C Bulb <strong>and</strong> bulbholder fitted for 12 volt illumination (2 wires)<br />
D Two terminals, normally 6.4mm Lucar but ammeters<br />
have 9.5mm Lucar terminals<br />
A<br />
B<br />
C<br />
D<br />
Depth over<br />
stud 54mm<br />
A Supplied with ‘O’ Ring<br />
B Studs with brackets <strong>and</strong> thumb nuts for fitting<br />
C Oil pressure fitting, see page 31 for oil pipe<br />
D Bulb <strong>and</strong> bulbholder fitted for 12 volt illumination (2 wires)<br />
Mechanical temperature <strong>and</strong> dual gauges have a capilliary<br />
1980mm long (78”) <strong>and</strong> bulb for temperature measurement<br />
A<br />
B<br />
C<br />
A<br />
B<br />
C<br />
D
Website open 24hrs everey day<br />
www.holden.co.uk<br />
GAUGES<br />
SENSORS & SENDER UNITS ECLIPSE & TELEMETRIX GAUGES<br />
FUEL TANK SENDER<br />
Functions with gauges 070.305 <strong>and</strong><br />
070.335 070.078<br />
£36.00 each | £31.30 ex VAT<br />
WATER OIL<br />
TEMPERATURE SENSORS<br />
Water temperature sensor for use with<br />
gauges 070.314 <strong>and</strong> 070.344. Thread<br />
is 3⁄8" NPTF 070.320<br />
£12.74 each | £11.08 ex VAT<br />
Oil temperature sensor for use with<br />
gauges 070.309, 070.311, 070.339,<br />
070.341. Thread is M14 070.319<br />
£12.74 each| £11.08 ex VAT<br />
To fit Eclipse or Telemetrix gauges you will need sensors or sending units as follows:<br />
TWIN CORE SCREENED CABLE<br />
For making the connection between<br />
speedometer 070.300, 070.301,<br />
070.330 or 070.331 <strong>and</strong> speed sensor<br />
070.316. 080.420<br />
£0.97 per metre | £0.84 ex VAT<br />
SPEED SENSOR FOR<br />
SPEEDOMETERS<br />
You will need to mount this sensor<br />
close to a rotating disc up to 152mm<br />
(6") diameter. You will also need twin<br />
core screened cable 080.420 to<br />
connect to the Speedometer 070.316<br />
£63.50 each | £55.22 ex VAT<br />
OIL PRESSURE SENSOR<br />
For use with oil pressure gauges<br />
070.307 <strong>and</strong> 070.337 070.318<br />
£32.57 each | £28.32 ex VAT<br />
MAGNETIC SENSOR FOR<br />
SPEEDOS<br />
Attach the six small magnets to the<br />
propshaft <strong>and</strong> fit the sensor in close<br />
proximity. You will also need twin core<br />
screened cable 080.420 to connect to<br />
the Speedometer 070.321<br />
£45.14 each | £39.25 ex VAT<br />
A useful addition to any car or motorcycle. Wire it in series with the battery via the ignition switch using heavy wires <strong>and</strong> it will<br />
tell you whether your battery is being charged or discharged. These ammeters are additional to those on other pages<br />
41.5 mm 41.5 mm<br />
Reads 8–0–8. Black dial<br />
with chrome bezel.<br />
Requires 40 mm diameter<br />
hole in panel 070.390<br />
£11.39 each | £9.90 ex VAT<br />
52 mm<br />
Reads 8–0–8. Black dial<br />
with chrome bezel. 52mm<br />
diameter 070.395<br />
£21.79 each | £18.95 ex VAT<br />
Reads 8–0–8. White dial<br />
with chrome bezel.<br />
Requires 40 mm diameter<br />
hole in panel 070.391<br />
£11.39 each | £9.90 ex VAT<br />
Reads 8–0–8. White dial<br />
with chrome bezel. 52mm<br />
diameter 070.396<br />
£21.79 each | £18.95 ex VAT<br />
AMMETERS<br />
41.5 mm<br />
Reads 12–0–12. Black dial<br />
with chrome bezel.<br />
Requires 40 mm diameter<br />
hole in panel 070.394<br />
£12.54 each | £10.90 ex VAT<br />
52 mm 52 mm 52 mm<br />
Reads 12–0–12. Black dial<br />
with chrome bezel. 52mm<br />
diameter 070.397<br />
£21.79 each | £18.95 ex VAT<br />
52 mm<br />
Reads 8–0–8. Black/white<br />
dial with chrome bezel.<br />
Replica of Miller 75v/812.<br />
52mm diameter 070.399<br />
£21.85 each | £19.00 ex VAT<br />
Reads 12–0–12. White dial<br />
with chrome bezel. 52mm<br />
diameter 070.398<br />
£21.85 each | £19.00 ex VAT<br />
31
32<br />
GAUGES<br />
1 ⁄8” NPTF TEMP<br />
SENDER<br />
Temperature Sender<br />
threaded 1 ⁄8" NPTF<br />
(27 t.p.i.) suitable for<br />
use with electrical oil<br />
& water temperature<br />
gauges. Fits MG's,<br />
Triumph Spitfire.<br />
Reliant Scimitar (to<br />
1976), Hillman Imp<br />
etc, or into 'T' Piece<br />
adaptors<br />
070.016<br />
£15.55 each<br />
£13.52 ex VAT<br />
WIRING DIAGRAM FOR SMITHS CLASSIC GAUGES<br />
1 ⁄8” NPTF OIL PRESSURE SENDER<br />
Oil Pressure Sender threaded 1 ⁄8" NPTF<br />
(27 t.p.i.) suitable for up to 100lbs per<br />
square inch gauges. Screws directly<br />
into block on some engines, including<br />
MG's, Triumph Spitfire, Reliant<br />
Scimitar (to 1976), Hillman Imp etc.<br />
or screws into 'T' Pieces or adaptors<br />
070.258 or 070.259<br />
070.185 £37.40 each | £32.52 ex VAT<br />
FITTINGS FOR SMITHS GAUGES - SENDERS<br />
5 ⁄8” UNF TEMP<br />
SENDER<br />
Temperature Sender<br />
threaded 5 ⁄8" UNF (18<br />
t.p.i.) suitable for use<br />
with electrical oil &<br />
water temp gauges<br />
070.017<br />
£15.55 each<br />
£13.52 ex VAT<br />
For use with Oil Pressure <strong>and</strong> Dual Gauges<br />
1 ⁄4” BSP OIL PRESSURE SENDER<br />
Oil Pressure Sender threaded 1 ⁄4" BSP<br />
(19 t.p.i.) suitable for up to 100lbs per<br />
square inch Gauges. Screws directly<br />
into block on some engines.<br />
070.186 £49.54 each | £43.08 ex VAT<br />
5 ⁄8” UNF TEMP<br />
SENDER<br />
INSULATED<br />
Temperature Sender<br />
threaded 5 ⁄8” UNF (18<br />
t.p.i.) with separate<br />
insulated earth return<br />
for use with housings<br />
080.879 to 080.883<br />
which fit into a<br />
radiator hose<br />
070.020<br />
£15.81 each<br />
£13.75 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
1 ⁄2” UNF OIL PRESSURE SENDER<br />
Oil Pressure Sender threaded 1 ⁄2" UNF<br />
(20 t.p.i.) suitable for up to 100lbs per<br />
square inch gauges. Screws directly<br />
into block on some engines, including<br />
L<strong>and</strong> Rover V8 <strong>and</strong> Range Rover.<br />
070.187 £49.54 each | £43.08 ex VAT<br />
5 ⁄8” UNF TEMP<br />
SENDER FOR<br />
MINI & MGB<br />
Temperature Sender<br />
threaded 5 ⁄8” UNF (18<br />
t.p.i.), with brass<br />
body. Fits Mini 998cc<br />
& MGB 1976+ for<br />
use with the original<br />
gauge on the car<br />
070.047<br />
£8.63 each<br />
£7.50 ex VAT<br />
Picture coming<br />
soon<br />
5 ⁄8” UNF TEMP<br />
SENDER FOR<br />
TRIUMPHS<br />
Temperature Sender<br />
threaded 5 ⁄8” UNF (18<br />
t.p.i.) with brass<br />
body. Fits Triumph<br />
TR2/3/3A/4/4A for<br />
use with the original<br />
gauge on the car<br />
070.048<br />
£8.63 each<br />
£7.50 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
GAUGES<br />
FITTINGS FOR SMITHS GAUGES - ADAPTORS & OIL PIPE<br />
Mechanically operated temperature gauges come fitted with<br />
a flexible capillary tube leading to a copper bulb. There are<br />
two types but both are fitted with an adaptor which provides<br />
a 5⁄8” UNF male thread for screwing into the block<br />
070.044<br />
070.043<br />
11mm<br />
10mm<br />
5 ⁄8” UNF<br />
5 ⁄8” UNF WATER TEMP<br />
ADAPTOR<br />
5 ⁄8" UNF male thread <strong>and</strong> a<br />
5 ⁄8" UNF female thread to suit<br />
sender 070.017 070.044<br />
£6.33 each | £5.50 ex VAT<br />
070.025 comes<br />
complete with<br />
070.031 Adaptor<br />
5 ⁄8” UNF<br />
36mm<br />
Copper Washer here<br />
Flexible<br />
tube to gauge<br />
33mm 57mm Flexible<br />
tube to gauge<br />
5 ⁄8” UNF MECHANICAL<br />
WATER TEMP ADAPTOR<br />
This has a 5 ⁄8" UNF male<br />
thread to screw into the<br />
block <strong>and</strong> a 3 ⁄8" BSP thread<br />
for the nut on the end of the<br />
capillary tube. 070.043<br />
£6.33 each | £5.50 ex VAT<br />
OIL PIPE FOR MECHANICAL GAUGES<br />
For use between the mechanical oil pressure gauge <strong>and</strong><br />
adaptor 070.031<br />
1.5 metres long 070.024 £7.48 each | £6.50 ex VAT<br />
3.0 metres long 070.025 £14.89 each | £12.96 ex VAT<br />
3 ⁄8” BSP OIL PRESSURE<br />
ADAPTOR<br />
This has a female thread<br />
into which you can fit oil<br />
pressure adaptor 070.031 or<br />
oil pressure sender 070.185<br />
070.259<br />
£6.33 each | £5.50 ex VAT<br />
5 ⁄8” UNF MECHANICAL<br />
OIL PRESSURE ADAPTOR<br />
This adaptor has a 5 ⁄8" UNF<br />
male thread <strong>and</strong> a female<br />
thread into which you can fit<br />
oil pressure adaptor<br />
070.031 or oil pressure<br />
sender 070.185 070.258<br />
£5.91 each | £5.14 ex VAT<br />
3 ⁄8” BSP WATER TEMP<br />
ADAPTOR<br />
3 ⁄8" BSP male thread <strong>and</strong> a 5 ⁄8"<br />
UNF female thread to suit<br />
sender 070.017.<br />
070.257<br />
£6.33 each | £5.50 ex VAT<br />
1 ⁄8" NPTF OIL PRESSURE<br />
ADAPTOR<br />
Straight adaptor 1 ⁄8" NPTF<br />
(27 t.p.i.) each side.<br />
070.031<br />
£4.03 each | £3.50 ex VAT<br />
OIL PIPE FOR MECHANICAL GAUGES<br />
1170mm long (black) for use between the mechanical oil<br />
pressure gauge <strong>and</strong> adaptor 070.031<br />
070.365 £11.21 each | £9.75 ex VAT<br />
Enables you to fit a mechanical or electrical gauge <strong>and</strong> retain your original oil pressure<br />
switch. These adaptors fit in place of your original oil pressure switch which is then screwed<br />
into the end of the adaptor. The side take-off is tapped 1 ⁄8" NPTF (27 t.p.i.) into which you can<br />
fit oil pressure adaptor 070.031 for mechanical gauges or oil pressure sender 070.185 for<br />
electrical gauges<br />
Size <strong>Car</strong> makes Part No. Price<br />
1 ⁄4”x18 NPT<br />
FITTINGS FOR SMITHS GAUGES - T PIECE ADAPTORS<br />
Fords, Reliant Scimitar & SS1, Saab 250 & 95, Vauxhall <strong>Car</strong>lton,<br />
Viceroy, Viva HC (post 76) Chevette, Royale, Cavalier, Viva HA<br />
& HB (exc 1600), GT, HC (pre 76) Firenza, Magnum 2.3L, VX<br />
1800/2300 (76 on) VX 4/90 FD & FE, Victor FE, Viva 1600,<br />
Firenza 1600, 1800 & 2000, Victor Ventora FD<br />
(The thread sizes given here are the male threads that screw into the block)<br />
070.026 £6.33 each | £5.50 ex VAT<br />
3 ⁄8” BSF L<strong>and</strong> Rover (not V8), Rover P6, 2000, 2200 070.027 £6.33 each | £5.50 ex VAT<br />
1 ⁄8”x27 NPTF Mini, MG’s, Triumph Spitfire, Reliant Scimitar (to 1976), Hillman<br />
Hunter, Avenger & Imp, DAF 33 & 44, Saab 99 & 900 etc.<br />
070.033 £6.33 each | £5.50 ex VAT<br />
1 ⁄8”x28 BSPT Triumph TR7 070.250 £6.33 each | £5.50 ex VAT<br />
1 ⁄2” UNF L<strong>and</strong> Rover V8, Range Rover, Jaguar 6 cyl 070.251 £6.33 each | £5.50 ex VAT<br />
33
34<br />
GAUGES<br />
TOP MOUNTING<br />
FUEL TANK SENDER<br />
Top mounting. Five hole fitting.<br />
Rubber gasket supplied. The arm<br />
length is screw adjustable for<br />
rectangular tanks of depths between<br />
240mm <strong>and</strong> 410mm. For use with fuel<br />
gauges 070.010 <strong>and</strong> 070.061<br />
070.091<br />
£29.90 each | £26.00 ex VAT<br />
MINI SIDE MOUNTING<br />
FUEL TANK SENDER<br />
The special fuel tank sender for the<br />
Mini. It fits to the side of the tank <strong>and</strong><br />
is secured with the locking ring (sorry,<br />
not supplied by us). This sender will<br />
work with all classic Mini fuel gauges<br />
which are within the speedometer<br />
070.119<br />
£30.82 each | £26.80 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
FITTINGS FOR SMITHS GAUGES - FUEL TANK SENDERS<br />
These senders will only work with bi-metal fuel gauges. They will not work with the earlier moving coil instruments.<br />
All SMITHS fuel gauges offered on the previous pages are bi-metal, so these senders will work with them unless stated.<br />
SIDE MOUNTING<br />
FUEL TANK SENDER<br />
St<strong>and</strong>ard Smiths fitting – six holes<br />
5.08mm diameter on 60.33mm pitch<br />
circle diameter. Cork gasket supplied. The arm length is<br />
adjustable for rectangular tanks of depths between 381mm<br />
<strong>and</strong> 610mm. 070.012 £36.00 each | £31.30 ex VAT<br />
TOP MOUNTING FOR ORIGINAL<br />
MOVING COIL FUEL GAUGES<br />
Replaces Smiths six hole top mounted<br />
sender. Suits moving coil fuel gauges.<br />
Arm secured by a grub screw which<br />
can be adjusted or replaced. 070.233<br />
£53.68 each | £46.68 ex VAT<br />
VACUUM ADAPTOR<br />
Threaded 2 BA for fitting into the engine manifold to make a<br />
vacuum connection. Supplied with screw to seal it off when<br />
not in use. For pipe refer to 030.018<br />
070.350 £4.54 each | £3.95 ex VAT<br />
SIDE MOUNTING FOR ORIGINAL<br />
MOVING COIL FUEL GAUGES<br />
Replaces Smiths six hole side<br />
mounted sender. Suits moving coil<br />
fuel gauges. Arm secured by a grub<br />
screw which can be adjusted or<br />
replaced. 070.236<br />
£56.35 each | £49.00 ex VAT<br />
FITTINGS FOR VACUUM GAUGES<br />
TOP MOUNTING<br />
FUEL TANK SENDER<br />
St<strong>and</strong>ard Smiths fitting – six holes<br />
5.08mm dia. on 60.33mm pitch circle dia.<br />
Cork gasket supplied. The arm length is adjustable for<br />
rectangular & cylindrical tanks of depths/diameters between<br />
203mm & 610mm. 070.011 £36.00 each | £31.30 ex VAT<br />
SIDE MOUNTING FOR LOW FUEL<br />
LIGHT MG TC/TD/TF<br />
Replaces Smiths six hole sender on<br />
MG TC/TD/TF which does not have a<br />
fuel gauge, just a low fuel warning<br />
light on the dash. Can be used on<br />
other cars with a similar system.<br />
070.235<br />
£53.68 each | £46.68 ex VAT<br />
FLOAT FOR FUEL TANK SENDERS<br />
White plastic float for all fuel tank<br />
senders we offer here, <strong>and</strong> can also<br />
be adapted to replace original cork<br />
floats. Overall length 55mm, maximum<br />
overall diameter 31mm <strong>and</strong> the<br />
diameter where the wire fits is 25mm<br />
070.229<br />
£7.48 each | £6.50 ex VAT<br />
VACUUM PIPE<br />
4.5mm internal diameter. Blue/black<br />
030.018 £6.49 per metre | £5.64 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk GAUGES<br />
FITTINGS FOR SMITHS GAUGES - VOLTAGE STABILISERS<br />
All Smiths <strong>Classic</strong> electrically operated gauges require a voltage stabiliser to<br />
regulate the voltage supply. See VOLT REG in the wiring diagram on page 32.. At<br />
least one stabiliser is required per three gauges:<br />
VOLTAGE STABILISER<br />
For negative earth<br />
070.019 £11.89 each | £10.34 ex VAT<br />
For positive earth<br />
070.362 £11.89 each | £10.34 ex VAT<br />
FITTINGS FOR SMITHS GAUGES - HOUSING<br />
HOUSING FOR WATER TEMPERATURE SENDER<br />
A housing that enables you to fit an electrical or mechanical<br />
sender into your top radiator hose to measure water temperature.<br />
Threaded 5 ⁄8" UNF (18 t.p.i.)<br />
VOLTAGE STABILISER FOR MINI<br />
This is a special unit for <strong>Classic</strong> Mini<br />
070.118 £11.89 each | £10.34 ex VAT<br />
Hose diameter Part No. Price<br />
VOLTAGE REDUCER<br />
If you have converted your 6v car to<br />
12v negative earth <strong>and</strong> wish to<br />
continue to use the original 6v gauges<br />
<strong>and</strong> senders this electronic device<br />
allows you to do this. Use one for each<br />
gauge but not normally the ammeter.<br />
Goes on the back of gauge. Full<br />
instructions supplied<br />
070.364 £11.44 each | £9.95 ex VAT<br />
25mm *080.879 £21.85 each | £19.00 ex VAT<br />
30mm *080.880 £21.85 each | £19.00 ex VAT<br />
35mm 080.881 £21.85 each | £19.00 ex VAT<br />
38mm 080.883 £21.85 each | £19.00 ex VAT<br />
*Mechanical bulbs will require Adaptor 070.044<br />
FITTINGS FOR SMITHS GAUGES - MOUNTING BRACKETS & PODS<br />
BLACK MOUNTING POD<br />
This pod will enable you to fit Smiths<br />
electrically operated 52mm gauges to<br />
any car. Can be mounted either above<br />
or below the dash. Made from<br />
injection moulded black plastic. You<br />
will also need a fitting kit (below)<br />
070.430 £27.54 each | £23.95 ex VAT<br />
MOUNTING POD FITTING KITS<br />
For plastic cased gauges This<br />
enables you to fit Smiths electrically<br />
operated 52mm gauge into pod<br />
070.433 £5.69 each | £4.95 ex VAT<br />
SILVER MOUNTING POD<br />
This pod will enable you to fit Smiths<br />
electrically operated 52mm gauges to<br />
any car. Can be mounted either above<br />
or below the dash. Made from<br />
injection moulded black plastic with<br />
silver anodised spun aluminium front.<br />
You will also need a fitting kit (below)<br />
070.431 £27.54 each | £23.95 ex VAT<br />
MOUNTING POD FITTING KITS<br />
For metal cased gauges. This enables<br />
you to fit Smiths electrically operated<br />
52mm gauges into pod.<br />
070.432 £5.69 each | £4.95 ex VAT<br />
MOUNTING POD FOR<br />
TACHOMETERS<br />
Designed for mounting 80mm dia.<br />
tachometers on the top of the dash.<br />
070.077 £18.11 each | £15.75 ex VAT<br />
BRACKET FOR ONE GAUGE<br />
Mounting bracket for one 52mm<br />
gauge, with brown woodgrain finish..<br />
070.157 £7.42 each | £6.45 ex VAT<br />
35
36<br />
WASHERS & WIPERS<br />
Single Screen Jet,<br />
chrome. Uses 3mm<br />
tubing 040.014<br />
£4.72 each<br />
£4.10 ex VAT<br />
T-piece for 4mm<br />
tubing 040.029<br />
£2.68 each<br />
£2.33 ex VAT<br />
Picture coming<br />
soon<br />
Manual Pump 15mm<br />
hole size 040.036<br />
£20.70 each<br />
£18.00 ex VAT<br />
‘Trico solvent’ Sticker,<br />
44 x 100mm & ‘wiper<br />
blades’ 28mm dia.<br />
040.121<br />
£5.64 per set<br />
£4.90 ex VAT<br />
Double Screen Jet<br />
with hexagon base,<br />
chrome. Uses 4mm<br />
tubing) 040.051<br />
£7.59 each<br />
£6.60 ex VAT<br />
Elbow for 4mm<br />
tubing 040.047<br />
£3.34 each<br />
£2.90 ex VAT<br />
Non-return Valve for 040.010 Tudor<br />
washer bottle 040.026<br />
£1.55 each | £1.35 ex VAT<br />
Fits with 30mm ‘P’<br />
clip. 12V 040.016<br />
£16.68 each<br />
£14.50 ex VAT<br />
‘Trico’ windscreen<br />
washer’ Sticker<br />
091.185<br />
£3.34 each<br />
£2.90 ex VAT<br />
WASHER JETS<br />
Double Screen Jet,<br />
chrome. Uses 4mm<br />
tubing 040.013<br />
£5.91 each<br />
£5.14 ex VAT<br />
In line Non-return<br />
Valve for 4mm tubing<br />
040.030<br />
£2.98 each<br />
£2.59 ex VAT<br />
Bulkhead Connector, a neat way to get<br />
your 4mm washer tube through the<br />
bulkhead 040.035<br />
£3.74 each | £3.25 ex VAT<br />
WASHER PUMPS<br />
With metal casing,<br />
12V 040.039<br />
£19.32 each<br />
£16.80 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Double Screen Jet,<br />
black plastic. Uses<br />
4mm tubing)<br />
040.038<br />
£4.19 each<br />
£3.64 ex VAT<br />
Foot Valve for 4mm<br />
tubing (goes in<br />
bottle) 040.031<br />
£3.58 each<br />
£3.11 ex VAT<br />
Clear Windscreen Washer Tubing<br />
3mm ( 1 ⁄8”) internal dia. 040.020<br />
£1.44 per metre | £1.25 ex VAT<br />
4mm ( 3 ⁄16”) internal dia. 040.021<br />
£2.01 per metre | £1/75 ex VAT<br />
Universal 12V, flange<br />
mounted 040.015<br />
£11.81 each<br />
£10.27 ex VAT<br />
WASHER BOTTLE STICKERS<br />
‘Tudor’ Sticker, 239mm x 35mm, fits small Tudor<br />
washer bottle 040.120<br />
£4.31 each | £3.75 ex VAT<br />
Non-return Valve<br />
T-piece. Uses 3mm &<br />
4mm tubing 040.046<br />
£3.88 each<br />
£3.37 ex VAT<br />
Foot Valve with filter<br />
for 4mm tubing (goes<br />
in bottle) 040.032<br />
£4.17 each<br />
£3.63 ex VAT<br />
High Volume, fit with<br />
30mm ‘P’ clip, 30%<br />
bigger heavy duty<br />
motor. 12V<br />
040.017<br />
£14.66 each<br />
£12.75 ex VAT<br />
‘Lucas Screenjet’<br />
Sticker 50 x 70mm<br />
040.122<br />
£5.23 each<br />
£4.55 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
TRICO WASHER BOTTLE<br />
Vacuum operated. As fitted to Jaguar<br />
XK120, 140 & Rolls-Royce 040.000<br />
£173.64 each | £150.99 ex VAT<br />
LUCAS WASHER BOTTLE<br />
12V electric operation. As fitted to<br />
Jaguar E Type series I 4.2, series II<br />
etc. 5SJ<br />
£105.05 each | £91.35 ex VAT<br />
WASHER BOTTLE<br />
Incorporating a 12V electric pump<br />
built in to the side of the plastic bottle.<br />
With bracket. Width 145mm x depth<br />
70mm x height 180mm, capacity 1.2<br />
litres. Use 4mm washer tubing<br />
040.049<br />
£28.75 each | £25.00 ex VAT<br />
WASHERS & WIPERS<br />
WASHER BOTTLES<br />
TRICO WASHER BOTTLE<br />
Vacuum operated. As fitted to Jaguar<br />
XK150, many other 1950’s applications<br />
040.009<br />
£173.64 each | £150.99 ex VAT<br />
BAG TYPE WASHER BOTTLE<br />
Incorporating a 12V electric pump<br />
built in to the side. Width approx<br />
210mm x 290mm tall. With 4mm<br />
tubing <strong>and</strong> a bracket to hang it on<br />
040.050<br />
£25.88 each | £22.50 ex VAT<br />
VACUUM HOSE<br />
This vacuum hose is 3.5mm internal<br />
diameter <strong>and</strong> is ideal for connecting<br />
Trico vacuum operated washer bottles<br />
to the inlet manifold. Black 040.048<br />
£2.76 per metre | £2.40 ex VAT<br />
LUCAS WASHER BOTTLE<br />
12V electric operation. As fitted to<br />
Jaguar ‘E’ Type series I, Aston<br />
Martins in 1960s etc. 2SJ<br />
£181.53 each | £157.85 ex VAT<br />
Although some of these items are electric we have included them here to keep all washer parts together<br />
LUCAS WASHER BOTTLE<br />
12V electric operation. As fitted to<br />
Triumph TR6 518264<br />
£71.73 each | £62.37 ex VAT<br />
LUCAS WASHER BOTTLE<br />
Electric operation. As fitted to<br />
Morgan, many other 1960s & 1970s<br />
applications WSB101<br />
£60.77 each | £52.84ex VAT<br />
TUDOR WASHER BOTTLES<br />
(Printed, not sticker). As fitted to MGA,<br />
<strong>and</strong> other 1950s & 1960s applications.<br />
160mm tall 040.010<br />
£18.19 each | £15.82 ex VAT<br />
200mm tall 040.022<br />
£34.43 each | £29.94 ex VAT<br />
WASHER BOTTLE BRACKETS<br />
For 160mm Tudor Washer Bottle<br />
040.019 £7.94 each | £6.90 ex VAT<br />
For 200mm Tudor Washer Bottle<br />
040.023 £13.80 each | £12.00 ex VAT<br />
37
38<br />
WASHERS & WIPERS<br />
STEEL BODIED WIPER MOTOR<br />
12V wiper motor, incorporating a<br />
switch. 110 degree sweep. Cut 6mm<br />
diameter shaft <strong>and</strong> spindle to length.<br />
040.100<br />
£171.17 each | £148.84 ex VAT<br />
5mm WIPER ARMS WITH NUT ON TOP<br />
Wiper Arms for For MG TC etc. 150mm long with collet<br />
fixing on drive end to fit 3 ⁄16” (approx 5mm) diameter shaft<br />
Right H<strong>and</strong> Arm 040.117<br />
£30.74 each | £26.73ex VAT<br />
SCREEN MOUNTED WIPER MOTORS<br />
WINDSCREEN MOUNTED WIPER MOTOR<br />
A beautifully made <strong>and</strong> chrome plated quick mount wiper motor for those of you<br />
who don't want to drill your screen frame. It clamps over the top of your screen<br />
<strong>and</strong> has a quick release electrical connection for 12V. (If you want to put up your<br />
hood you may have to arrange it around the motor)<br />
040.106 £127.08 per kit | £110.95 ex VAT<br />
TANDEM WIPER ARMS: COLLET FIXING<br />
Left H<strong>and</strong> Arm 040.118<br />
£30.74 each | £26.73ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
ALL METAL PARTS ON THESE ARMS ARE EITHER STAINLESS STEEL OR CHROME PLATED<br />
STRAIGHT CONNECTING BAR<br />
For use with screen mounted wiper assemblies as on the<br />
MG TC. This straight bar connects the two wiper arms<br />
together <strong>and</strong> is 460mm long. 732191S<br />
£8.72 each | £7.58 ex VAT<br />
VINTAGE STYLE WIPER MOTOR<br />
12V wiper motor with switch, 1 ⁄4”<br />
(approx 6mm) dia. shaft, 110˚ sweep.<br />
040.103<br />
£60.59 each | £52.69 ex VAT<br />
5mm WIPER ARMS WITH NUT ON UNDERNEATH<br />
Wiper Arms for For MG TC etc. 150mm long with collet<br />
fixing on drive end to fit 3 ⁄16” (approx 5mm) diameter shaft<br />
Right H<strong>and</strong> Arm 040.112<br />
£30.74 each | £26.73ex VAT<br />
CAV WIPER MOTOR<br />
12V wiper motor with switch. Two 5 ⁄16”<br />
mounting studs 58mm (approx 2 5 ⁄16”)<br />
apart. Wiper spindle is 5mm diameter.<br />
Made by CAV in Acton, London<br />
040.101<br />
£161.00 each | £140.00 ex VAT<br />
WIPER MOTOR MOUNTING KIT<br />
Comprises 3 rubber mounting bushes,<br />
3 studs, 3 nuts <strong>and</strong> 6 washers<br />
040.104<br />
£14.32 per set | £12.45 ex VAT<br />
Left H<strong>and</strong> Arm 040.113<br />
£30.74 each | £26.73ex VAT<br />
BENT CONNECTING BAR<br />
For use with screen mounted wiper assemblies as on the<br />
MG TC. This bent bar connects the two wiper arms together<br />
<strong>and</strong> is 460mm long. 732191<br />
£8.72 each | £7.58 ex VAT<br />
IDLER SPINDLE<br />
(Left) For use with screen mounted wiper assemblies as on the MG TC. This idler<br />
supports the second wiper arm <strong>and</strong> blade 731721 £11.42 each | £9.93 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk WASHERS & WIPERS<br />
UNDER DASH WIPER MOTORS<br />
12V, 110˚ sweep, supplied with rack<br />
040.151<br />
£148.35 each | £129.00 ex VAT<br />
Block & connectors for wiring 040.151<br />
above 040.153<br />
£5.46 each | £4.75 ex VAT<br />
DRIVE TUBE WITH NUT<br />
Cut <strong>and</strong> flare the ends to fit<br />
your wheelboxes. Length<br />
910mm 60600539<br />
£32.20 each | £28.00 ex VAT<br />
32 TEETH ON WHEEL<br />
Shaft length 45mm<br />
including spline 72919<br />
£44.85 each | £39.00 ex VAT<br />
40 TEETH ON WHEEL<br />
Shaft length 49.75mm<br />
including spline 72910<br />
£44.85 each | £39.00 ex VAT<br />
X<br />
Spline fixing<br />
1) Length ‘x’ as shown<br />
UNDER DASH WIPER MOTORS<br />
UNDER DASH WIPER MOTORS<br />
Wiper motor kit suitable for Caterham, Cobra <strong>and</strong> other<br />
kit car constructors: Comprises two speed Lucas motor with<br />
automatic park, rack, mild steel drive tube (that you can cut into three or<br />
even four lengths, flare the ends <strong>and</strong> fit), motor gear (110˚ sweep), mounting pad<br />
<strong>and</strong> locating strap, two wheelboxes that can be positioned anywhere along the<br />
drive tube, two ferrules <strong>and</strong> two embellisher sets. (You will need to order<br />
separately wiper arms with spline fixing) 040.150<br />
£228.85 each | £199.00 ex VAT<br />
RACK<br />
Used on many Lucas wiper<br />
motors. 1500mm long. Can<br />
be cut to length 743251<br />
£23.56 each | £20.49 ex VAT<br />
WHEELBOXES & FITTING<br />
32 TEETH ON WHEEL<br />
For <strong>Classic</strong> Mini. Shaft<br />
length 49.5mm inc. spline<br />
72872<br />
£44.85 each | £39.00 ex VAT<br />
40 TEETH ON WHEEL<br />
Shaft length 52.3mm<br />
including spline 72933<br />
£44.85 each | £39.00 ex VAT<br />
2) Lucas 5 or 6 figure no.<br />
FERRULE<br />
Used on many Lucas wiper<br />
motors. Locates the tube<br />
with the rack inside<br />
54704623<br />
£4.70 each | £4.09 ex VAT<br />
32 TEETH ON WHEEL<br />
Shaft length 64.75mm<br />
including spline 72891<br />
£44.85 each | £39.00 ex VAT<br />
40 TEETH ON WHEEL<br />
Shaft length 60.5mm<br />
including spline 72965<br />
£44.85 each | £39.00 ex VAT<br />
METAL NAMEPLATE<br />
For Lucas Two Speed<br />
Windscreen Wiper Motor,<br />
64mm x 23mm 040.123<br />
£10.35 each | £9.00 ex VAT<br />
32 TEETH ON WHEEL<br />
Shaft length 65mm<br />
including spline 72879<br />
£44.85 each | £39.00 ex VAT<br />
40 TEETH ON WHEEL<br />
Shaft length 65.25mm<br />
including spline 72866<br />
£44.85 each | £39.00 ex VAT<br />
3) Number of teeth on wheel<br />
WHEELBOXES TO YOUR SPECIFICATION<br />
We have many types of Lucas wheelboxes in stock. However, identification has not proved to be easy. If you require a<br />
wheelbox please help us to identify your requirements by advising length <strong>and</strong> numbers From £39.00 each<br />
39
40<br />
WASHERS & WIPERS<br />
WHEELBOX KIT<br />
Chromed nut, cover <strong>and</strong><br />
gasket for MGA 040.006<br />
£7.48 each | £6.50 ex VAT<br />
As above but with six-sided<br />
nut 040.061<br />
£7.48 each | £6.50 ex VAT<br />
5mm BAYONET FITTING<br />
260mm long, as fitted on the Mini & Cobra<br />
Cranked right 040.302 Cranked left 040.301<br />
£14.08 each | £12.24 ex VAT £14.08 each | £12.24 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
ALL METAL PARTS ON THESE ARMS ARE EITHER STAINLESS STEEL OR CHROME PLATED<br />
6mm WIPER ARM<br />
Adjustable for length between 220–285mm. Collet fixing on<br />
drive end to fit 1 ⁄4” (approx 6mm) dia. shaft (nut underneath)<br />
040.111 £20.42 each | £17.76 ex VAT<br />
BAYONET WIPER ARMS: SPLINE FIXING<br />
ALL METAL PARTS ON THESE ARMS & BLADES ARE EITHER STAINLESS STEEL OR CHROME PLATED<br />
*indicates tightening by crosshead screw, this type of blade is helpful if the splines on your wheelboxes are WORN<br />
ADAPTOR SPLINE TO COLLET<br />
If you have 1 ⁄4" (approx 6mm) diameter plain shafts, this<br />
adaptor clamps to the shaft <strong>and</strong> enables you to use wiper<br />
arms with the crosshead screw fitting 040.001<br />
£10.35 each | £9.00 ex VAT<br />
330mm long as fitted on the<br />
Reliant Scimitar<br />
Cranked right 040.300<br />
£23.97 each | £20.84 ex VAT<br />
7mm BAYONET FITTING<br />
WHEELBOX KIT<br />
Chromed nut, cover <strong>and</strong><br />
gasket for MGB GT<br />
040.060<br />
£7.48 each | £6.50 ex VAT<br />
WIPER ARMS: COLLET FIXING<br />
400mm long as fitted on the<br />
Lotus Europa<br />
Straight 040.200<br />
£19.83 each | £17.24 ex VAT<br />
WHEELBOX KITS<br />
WHEELBOX KIT<br />
Chromed nut, cover <strong>and</strong><br />
gasket for Jaguar E Type<br />
040.007<br />
£7.48 each | £6.50 ex VAT<br />
5mm BAYONET FITTING<br />
155mm long, as fitted on the Morgan/ Lotus 7.<br />
Straight *040.310<br />
£14.54 each | £12.64 ex VAT<br />
WHEELBOX NUT<br />
Eight sided 040.065<br />
£2.13 each | £1.85 ex VAT<br />
Six sided 040.066<br />
£2.13 each | £1.85 ex VAT<br />
5mm<br />
Cranked left *040.305<br />
£17.18 each | £14.94 ex VAT<br />
5mm BAYONET FITTING<br />
Adjustable for length between 215–270mm<br />
Cranked right Straight<br />
Cranked left<br />
*040.303<br />
*040.313<br />
*040.304<br />
£14.54 each £14.08 each £14.54 each<br />
£12.64 ex VAT £12.24 ex VAT £12.64 ex VAT<br />
7mm<br />
7mm BAYONET FITTING<br />
Adjustable for length between 260 – 330mm<br />
Cranked right Straight<br />
Cranked left<br />
*040.306<br />
*040.314<br />
*040.307<br />
£19.83 each £15.10 each £19.83 each<br />
£17.24 ex VAT £13.13 ex VAT £17.24 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
PEG TYPE<br />
Rubber Retaining Peg 040.114<br />
£1.52 each | £1.32 ex VAT<br />
BAYONET<br />
5mm CURVED OR FLAT SCREEN<br />
228mm (9”) long 040.509<br />
£11.26 each | £9.79 ex VAT<br />
254mm (10”), period style, hinged in<br />
the centre, & polished 040.510<br />
£11.26 each | £9.79 ex VAT<br />
279mm (11”) long 040.511<br />
£11.26 each | £9.79 ex VAT<br />
305mm (12”) long 040.512<br />
£11.26 each | £9.79 ex VAT<br />
330mm (13”) long 040.513<br />
£11.26 each | £9.79 ex VAT<br />
WASHERS & WIPERS<br />
PEG TYPE WIPER BLADES<br />
ALL METAL PARTS ON THESE BLADES ARE EITHER STAINLESS STEEL OR CHROME PLATED<br />
BAYONET WIPER BLADES<br />
PEG TYPE WIPER BLADE & PEG<br />
Peg Type Wiper Blade for flat screen, 203mm (8”) long<br />
040.115 £9.63 each | £8.37 ex VAT<br />
Peg Type Wiper Blade for flat screen, 228mm (9”) long<br />
040.116 £9.63 each | £8.37 ex VAT<br />
Peg Type Wiper Blade for flat screen, 254mm (10”) long<br />
040.125 £9.63 each | £8.37 ex VAT<br />
Peg Type Wiper Blade for flat screen, 254mm (10”) long<br />
040.125 £9.63 each | £8.37 ex VAT<br />
ALL METAL PARTS ON THESE BLADES ARE EITHER STAINLESS STEEL OR CHROME PLATED<br />
SPOON END WIPER ARMS: SPLINE FIXING<br />
5mm FLAT SCREEN<br />
254mm (10”) long 040.110<br />
£7.60 each | £6.61 ex VAT<br />
WIPER ARMS FOR LUCAS STANDARD SPLINED SHAFTS AND USING SPOON END WIPER BLADES<br />
Cranked left Cranked right Cranked left<br />
Wiper arm 220mm long as fitted on the<br />
Sprite/Midget 040.308<br />
£17.18 each | £14.94 ex VAT<br />
Cranked right<br />
Wiper arm adjustable for length<br />
between 255–315mm *040.315<br />
£17.86 each | £15.53 ex VAT<br />
SPOON END<br />
8”<br />
FLAT SCREEN<br />
203mm (8”) long, including Triumph<br />
TR2 to TR3a 040.718<br />
£11.26 each | £9.79 ex VAT<br />
7mm CURVED OR FLAT SCREEN<br />
279mm (11”) long 040.711<br />
£12.31 each | £10.70 ex VAT<br />
305mm (12”) long 040.712<br />
£12.31 each | £10.70 ex VAT<br />
330mm (13”) long 040.713<br />
£12.31 each | £10.70 ex VAT<br />
355mm (14”) long 040.714<br />
£12.31 each | £10.70 ex VAT<br />
381mm (15”) long 040.715<br />
£19.10 each | £16.61 ex VAT<br />
406mm (16”) long 040.716<br />
£19.10 each | £16.61 ex VAT<br />
Wiper arm 240mm long as fitted on the<br />
Morris 1000 040.311<br />
£17.18 each | £14.94 ex VAT<br />
Straight<br />
Wiper arm adjustable for length<br />
between 255–315mm *040.316<br />
£17.86 each | £15.53 ex VAT<br />
SPOON END WIPER BLADES<br />
CURVED OR FLAT SCREEN<br />
203mm (8”) long 040.309<br />
£11.26 each | £9.79 ex VAT<br />
228mm (9”) long 040.323<br />
£11.26 each | £9.79 ex VAT<br />
Wiper arm 240mm long as fitted on the<br />
Morris 1000 040.312<br />
£17.18 each | £14.94 ex VAT<br />
Cranked left<br />
Wiper arm adjustable for length<br />
between 255–315mm *040.317<br />
£17.86 each | £15.53 ex VAT<br />
CURVED OR FLAT SCREEN<br />
254mm (10”) long 040.320<br />
£11.26 each | £9.79 ex VAT<br />
279mm (11”) long 040.321<br />
£11.26 each | £9.79 ex VAT<br />
305mm (12”) long 040.322<br />
£11.26 each | £9.79 ex VAT<br />
41
42<br />
MIRRORS<br />
SUCTION FITTING<br />
Black. Glass size 120 x<br />
53mm 090.104<br />
£6.44 each | £5.60 ex VAT<br />
DASH MOUNTED<br />
Can be mounted on thedash<br />
or at the top of windscreen,<br />
chrome finish. Glass size<br />
150 x 60mm 090.279<br />
£23.81 each | £20.70 ex VAT<br />
DASH MOUNTED<br />
Chrome arm/gold back, as<br />
fitted to the MGA in the<br />
1950/1960’s. Glass size 127<br />
x 50mm 090.101<br />
£21.85 each | £19.00 ex VAT<br />
DASH MOUNTED<br />
Dash mounted by a single<br />
stud, chrome finish. Glass<br />
size 120 x 65mm 090.198<br />
£36.80 each | £32.00 ex VAT<br />
INTERIOR MIRRORS<br />
SUCTION FITTING<br />
Stainless steel. Glass size<br />
157 x 63mm 094.310<br />
£15.18 each | £13.20 ex VAT<br />
DASH MOUNTED<br />
Chrome finish, adjustable<br />
height as fitted to the<br />
Jaguar XK140 090.103<br />
£42.55 each | £37.00 ex VAT<br />
DASH MOUNTED<br />
Chrome finish, the tall<br />
(125mm) version fitted to<br />
the Jaguar XK120. Glass<br />
size 113 x 40mm 090.102<br />
£40.95 each | £35.61 ex VAT<br />
SCREEN ROD FIXING<br />
As on MGB. Chrome arm,<br />
gold back, 153 x 55mm<br />
094.313<br />
£21.79 each | £18.95 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
WINDSCREEN MOUNTING<br />
Stainless steel with an<br />
adhesive backing. Glass size<br />
157 x 63mm 094.311<br />
£15.18 each | £13.20 ex VAT<br />
DASH MOUNTED<br />
Chrome finish.<br />
Glass size 127 x 53mm<br />
090.275<br />
£32.20 each | £28.00 ex VAT<br />
Glass size 170 x 62mm.<br />
090.276<br />
£34.50 each | £30.00 ex VAT<br />
DASH MOUNTED<br />
Chrome finish, the short<br />
version (55mm) fitted to the<br />
Jaguar XK120. Glass size<br />
113 x 40mm 090.100<br />
£37.95 each | £33.00 ex VAT<br />
SCREEN ROD FIXING<br />
FOR MGB<br />
For fixing to screen rod as<br />
on MGB. Chrome backing<br />
to mirror with diecast<br />
chromed bracket 094.319<br />
£24.09 each | £20.95 ex VAT<br />
ANGLED BRACKET<br />
Stainless steel <strong>and</strong> chrome.<br />
Glass size 150 x 60mm<br />
094.314<br />
£28.75 each | £25.00 ex VAT<br />
DASH MOUNTED<br />
Chrome arm <strong>and</strong> back, as<br />
fitted to the MGA in the<br />
1950/1960’s. Glass size 127<br />
x 50mm<br />
090.101/CHROME<br />
£23.81 each | £20.70 ex VAT<br />
DASH MOUNTED<br />
Chrome arm, black<br />
surround. Glass size 120 x<br />
55mm 094.312<br />
£10.29 each | £8.95 ex VAT<br />
STAINLESS STEEL HEAD<br />
With convex glass.<br />
Cranked arm with swivel<br />
ball end. Slots into Morgan<br />
windscreen casting <strong>and</strong><br />
clamp:<br />
Glass size 128 x 54mm<br />
094.315<br />
£34.44 each | £29.95 ex VAT<br />
Glass size 172 x 63mm<br />
094.316<br />
£36.74 each | £31.95 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk MIRRORS<br />
Round mirror head<br />
108mm dia. Convex Glass<br />
090.111<br />
£14.42 each | £12.54 ex VAT<br />
RECTANGULAR<br />
MIRROR HEAD<br />
108 x 95mm. Convex glass<br />
090.113<br />
£15.20 each | £13.22 ex VAT<br />
NUT<br />
For fixing mirror heads on<br />
the right (spare part)<br />
090.107<br />
£7.16 each | £6.23 ex VAT<br />
See below for Mirror Arms<br />
ROUND MIRROR HEAD<br />
108mm diameter. Flat Glass<br />
090.112<br />
£14.42 each | £12.54 ex VAT<br />
RECTANGULAR<br />
MIRROR HEAD<br />
108 x 95mm. Flat glass<br />
090.114<br />
£15.20 each | £13.22 ex VAT<br />
SHORT ARM & NUT<br />
Sprung based special short<br />
arm & nut as fitted to<br />
Rolls-Royce. Select your<br />
own mirror head 090.108<br />
£22.90 each | £19.91 ex VAT<br />
PAIR OF WING MIRRORS<br />
110mm dia. Flat glass 094.321<br />
£33.98 pair | £29.55 ex VAT<br />
WING MIRRORS<br />
RIGHT HAND<br />
1950’s to 1960’s period<br />
accessory, 107mm dia.<br />
Flat glass 090.123R<br />
£22.01 each | £19.14 ex VAT<br />
Convex glass 090.173R<br />
£22.01 each | £19.14 ex VAT<br />
CHROME WING<br />
MIRROR HEAD<br />
E Marked, 145 x 91mm.<br />
Convex glass 090.146<br />
£16.74 each | £14.56 ex VAT<br />
STRAIGHT ARM & NUT<br />
Sprung based straight arm<br />
& nut, chrome. Select your<br />
own mirror head 090.110<br />
£20.11 each | £17.49 ex VAT<br />
AMERICAN STYLE<br />
110mm dia. Not h<strong>and</strong>ed.<br />
Flat glass 094.322<br />
£18.69 each | £16.25 ex VAT<br />
LEFT HAND<br />
1950’s to 1960’s period<br />
accessory, 107mm dia.<br />
Flat glass 090.123L<br />
£22.01 each | £19.14 ex VAT<br />
Convex glass 090.173L<br />
£22.01 each | £19.14 ex VAT<br />
CHROME WING<br />
MIRROR HEAD<br />
E Marked, 145 x 91mm. Flat<br />
glass 090.147<br />
£16.74 each | £14.56 ex VAT<br />
CURVED ARM & NUT<br />
Sprung based curved arm<br />
& nut, chrome. Select your<br />
own mirror head 090.109<br />
£20.11 each | £17.49 ex VAT<br />
ITAL STYLE<br />
Chrome/stainless wing<br />
mirror, 110mm diameter.<br />
Not h<strong>and</strong>ed. Flat glass<br />
094.320<br />
£21.79 each | £18.95 ex VAT<br />
43
44<br />
MIRRORS<br />
RIGHT HAND DOOR MIRROR<br />
133 x 78mm. Flat glass. Can be<br />
mounted on almost any vehicle<br />
090.126<br />
£26.13 each | £22.72 ex VAT<br />
RACING MIRROR<br />
A racing mirror specifically designed<br />
to fit on the left h<strong>and</strong> door on classic<br />
Minis, work <strong>and</strong> look good. A<br />
combination of chrome <strong>and</strong> stainless<br />
steel:<br />
Convex glass 090.223<br />
£44.32 each | £38.54 ex VAT<br />
Flat glass 090.225<br />
£44.32 each | £38.54 ex VAT<br />
VIEWMASTER MIRROR HEADS<br />
Polished stainless mirror heads<br />
140mm x 89mm.<br />
With flat glass 094.135<br />
£16.68 each | £14.50 ex VAT<br />
With convex glass 094.136<br />
£16.69 each | £14.50 ex VAT<br />
EITHER DOOR MIRROR<br />
Door mirror, not h<strong>and</strong>ed,<br />
round head, flat glass<br />
107mm diameter<br />
Chromed, with gasket<br />
090.156<br />
£25.30 each<br />
£22.00 ex VAT<br />
LEFT HAND DOOR MIRROR<br />
133 x 78mm. Flat glass. Can be<br />
mounted on almost any vehicle<br />
090.135<br />
£26.13 each | £22.72 ex VAT<br />
RACING MIRROR<br />
A racing mirror specifically designed<br />
to fit on the right h<strong>and</strong> door on classic<br />
Minis, work <strong>and</strong> look good. A<br />
combination of chrome <strong>and</strong> stainless<br />
steel:<br />
Convex glass 090.222<br />
£44.32 each | £38.54 ex VAT<br />
Flat glass 090.224<br />
£44.32 each | £38.54 ex VAT<br />
SWIVELLING DOOR<br />
MIRROR<br />
Fixes to either door <strong>and</strong> can<br />
be adjusted in height/<br />
angle, 108mm diameter.<br />
Chromed, with gasket<br />
090.270<br />
£33.35 each<br />
£29.00 ex VAT<br />
DOOR MIRRORS<br />
VIEWMASTER MIRROR ARMS<br />
Springback mirror arm, vertical height<br />
85mm, base 102mm x 32mm <strong>and</strong> hole<br />
centres 38mm.<br />
Left h<strong>and</strong> 094.133<br />
£26.45 each | £23.00 ex VAT<br />
Right h<strong>and</strong> 094.134<br />
£26.45 each | £23.00 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
MORGAN MIRROR<br />
HEAD<br />
Highly polished chrome<br />
plated brass domed mirror<br />
head with swivel connection<br />
to a stainless steel stem.<br />
British made from the best<br />
quality materials to a high<br />
st<strong>and</strong>ard of finish 094.318<br />
£40.19 each | £34.95 ex VAT<br />
FITTING KIT<br />
Allows mirrors Part No. 090.126, Part<br />
No. 090.135, Part No. 090.222 – Part<br />
No. 090.225 to be fitted to early<br />
classic Minis or MG Midget that<br />
didn’t originally have mirrors fitted. Not<br />
h<strong>and</strong>ed 090.127<br />
£11.47 each | £9.97 ex VAT<br />
FITTING KIT<br />
Allows mirrors Part No. 090.126, Part<br />
No. 090.135, Part No. 090.222 –<br />
090.225 to be fitted to later models of<br />
the classic Mini (with plastic mirrors)<br />
without re-drilling:<br />
Right h<strong>and</strong> fitting kit 090.348<br />
£3.99 each | £3.47 ex VAT<br />
Left h<strong>and</strong> fitting kit 090.359<br />
£3.99 each | £3.47 ex VAT<br />
PORSCHE STYLE<br />
DOOR MIRROR<br />
Stainless steel. 110mm dia. Supplied<br />
with two 5mm bolts. Complete with<br />
moulded rubber gasket. Use on either<br />
side of car 094.309<br />
£20.64 each | £17.95 ex VAT<br />
MORGAN MIRROR<br />
BASE<br />
Replacement base in<br />
polished stainless steel for<br />
the factory fitted door<br />
mirror. Made to suit existing<br />
hole fixing. It comes with a<br />
new rubber seal 094.317<br />
£57.44 each | £49.95 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
FLAT GLASS<br />
Bright polished aluminium <strong>and</strong><br />
chrome, 90mm dia. 090.296<br />
£22.71 each | £19.75 ex VAT<br />
CONVEX OR FLAT GLASS<br />
Chrome on spun brass. 100mm<br />
diameter glass, 2 bolt fixing. Convex<br />
glass 090.133<br />
£22.77 each | £19.80 ex VAT<br />
RAYDOT COPY<br />
Lightweight aluminium painted black,<br />
100mm diameter, flat glass. Single<br />
bolt fitting 090.678<br />
£28.04 each | £24.38 ex VAT<br />
RAYDOT COPY<br />
Lightweight aluminium with anodised<br />
finish & black base. Head is 100mm<br />
diameter, glass is 85mm diameter, flat<br />
glass. Single bolt fitting 090.677<br />
£28.04 each | £24.38 ex VAT<br />
RACING MIRRORS<br />
CONVEX GLASS<br />
Lightweight aluminium. 100mm diameter<br />
glass, 2 bolt fixing. 090.297<br />
£21.24 each | £18.47 ex VAT<br />
CONVEX OR FLAT GLASS<br />
Chrome on spun brass. 100mm<br />
diameter glass, 2 bolt fixing. Flat glass<br />
090.134<br />
£22.77 each | £19.80 ex VAT<br />
RAYDOT COPY<br />
Lightweight aluminium, 100mm<br />
diameter, flat glass. Single bolt fitting.<br />
090.676<br />
£28.04 each | £24.38 ex VAT<br />
LIGHTWEIGHT RACING MIRROR<br />
For left h<strong>and</strong> side of car. Adjustable.<br />
Flat glass 110 x 50mm. Black.<br />
Requires hole 6mm diameter<br />
090.668<br />
£33.35 each | £29.00 ex VAT<br />
MIRRORS<br />
CONVEX GLASS<br />
Chrome on copper. 100mm diameter<br />
glass, 2 bolt fixing. 090.273<br />
£46.00 each | £40.00 ex VAT<br />
CONVEX GLASS<br />
Black with convex glass, 100mm dia.<br />
090.274<br />
£20.70 each | £18.00 ex VAT<br />
RAYDOT COPY<br />
Lightweight aluminium, 100mm<br />
diameter, flat glass. Single bolt fitting.<br />
090.131<br />
£22.99 each | £19.99 ex VAT<br />
LIGHTWEIGHT RACING MIRROR<br />
For right h<strong>and</strong> side of car. Adjustable.<br />
Flat glass 110 x 50mm. Black.<br />
Requires hole 6mm diameter<br />
090.669<br />
£33.35 each | £29.00 ex VAT<br />
45
46<br />
MIRRORS<br />
GLASS CHANNEL<br />
MOUNTED<br />
Flat glass 70 x 110mm<br />
090.124<br />
£33.35 each | £29.00 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Round 105mm diameter with flat glass<br />
090.177<br />
£38.57 each | £33.54 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Flat glass 100mm diameter 094.331<br />
£25.30 each | £22.00 ex VAT<br />
SEAM MOUNTING<br />
For seam mounting on classic Minis.<br />
Flat glass 70 x 110mm 090.128<br />
£33.35 each | £29.00 ex VAT<br />
OVERTAKING MIRRORS<br />
GLASS CHANNEL<br />
MOUNTED<br />
Flat glass 70 x 110mm<br />
094.335<br />
£21.28 each | £18.50 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
GLASS CHANNEL<br />
MOUNTED<br />
Flat glass 106mm diameter<br />
094.330<br />
£20.64 each | £17.95 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Oval 125 x 85mm with flat glass<br />
090.178<br />
£38.57 each | £33.54 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Flat glass 75mm diameter 094.332<br />
£25.30 each | £22.00 ex VAT<br />
SEAM MOUNTING<br />
For seam mounting on classic Minis.<br />
Flat glass 70 x 110mm 094.336<br />
£21.28 each | £18.50 ex VAT<br />
GLASS CHANNEL<br />
MOUNTED<br />
Flat glass 106mm diameter<br />
094.337<br />
£33.35 each | £29.00 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Rectangular 145 x 90mm with flat<br />
glass 090.176<br />
£38.57 each | £33.54 ex VAT<br />
GLASS CHANNEL MOUNTED<br />
Flat glass 75mm diameter 094.333<br />
£24.73 each | £21.50 ex VAT<br />
SEAM MOUNTING<br />
For seam mounting on classic Minis.<br />
Flat glass 75mm diameter 094.334<br />
£24.73 each | £21.50 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
TYRE MOUNTED MIRROR<br />
Tyre mounted mirror with leather strap<br />
having a maximum effective length of<br />
480mm, flat glass 105mm diameter<br />
090.347<br />
£54.05 each | £47.00 ex VAT<br />
MIRROR BRACKET<br />
For MG T Types. Fits to holes in<br />
windscreen frame on TA, TB <strong>and</strong> TC.<br />
On TD & TF you will need to drill <strong>and</strong><br />
tap holes. Chrome plated<br />
Left h<strong>and</strong> 094.130<br />
£41.69 each | £36.25 ex VAT<br />
Right h<strong>and</strong> 094.131<br />
£41.69 each | £36.25 ex VAT<br />
These mirrors fit inside the end of the<br />
h<strong>and</strong>lebar. The mirror is held securely<br />
by an exp<strong>and</strong>ing sleeve which has<br />
equal expansion over its full length,<br />
thus it will not cause distortion to the<br />
h<strong>and</strong>lebar tube. Suitable for right <strong>and</strong><br />
left h<strong>and</strong> sides<br />
CUSTOM CRUISER<br />
Left/right mirrors with the 10mm<br />
st<strong>and</strong>ard thread. Head size 130 x<br />
75mm 094.327<br />
£14.89 each | £12.95 ex VAT<br />
VINTAGE MIRRORS<br />
VINTAGE STYLE ‘A’ POST<br />
Rectangular convex glass, 142 x<br />
65mm. Chromed. Mounting piece is<br />
58mm x 14mm with 5mm holes at<br />
42mm centres 090.125<br />
£59.80 each | £52.00 ex VAT<br />
MIRROR BRACKET<br />
For MG T Types, can be fitted either<br />
side of windscreen securing slot in<br />
lowered position. Supplied with dome<br />
nut, taper <strong>and</strong> flat washer 090.227<br />
£22.94 each | £19.95 ex VAT<br />
HANDLEBAR MIRRORS<br />
CIRCULAR<br />
Supplied with convex glass. Head size<br />
102mm Diameter<br />
094.323 £48.30 each | £42.00 ex VAT<br />
CLASSIC CUSTOM<br />
A pair of mirrors with the 10mm<br />
st<strong>and</strong>ard thread. Head size 130 x<br />
75mm 094.328<br />
£22.94 each | £19.95 ex VAT<br />
MIRRORS<br />
DESMO STYLE ‘A’ POST<br />
Oval convex glass, 102 x 75mm.<br />
Chromed. Mounting piece is 58mm x<br />
14mm with 5mm holes at 42mm<br />
centres 090.149<br />
£56.35 each | £49.00 ex VAT<br />
CONVEX GLASS<br />
Mirror for MG T Types. 157 x 80mm.<br />
Fits all three brackets shown left<br />
094.132<br />
£78.78 each | £68.50 ex VAT<br />
TRIANGULAR<br />
Supplied with convex glass. Head size<br />
130mm wide.<br />
094.325 £48.30 each | £42.00 ex VAT<br />
MIRROR MOUNT<br />
For use with mirrors with 10mm<br />
st<strong>and</strong>ard thread, including Part No.<br />
094.327 & part number 094.328<br />
094.329 £7.76 each | £6.75 ex VAT<br />
47
48<br />
SEATS & BELTS<br />
TAILOR MADE SEATS<br />
We can tailor seats to individual<br />
requirements both in size <strong>and</strong> choice<br />
of covering ranging from coloured<br />
PVC to colour matched quality leather.<br />
Delivery 5-8 weeks. Please ask our<br />
Sales department for a quotation. A<br />
50% deposit will be required for all<br />
tailor made seats.<br />
Sample colour<br />
Coloured PVC 090.317<br />
£457.13 each | £397.50 ex VAT<br />
Sample colour<br />
Coloured leather 090.319<br />
£562.93 each | £489.50 ex VAT<br />
BUCKET SEAT SHELL<br />
Untrimmed bucket seat shell for your<br />
own trimmer to complete 090.339<br />
£217.35 each | £189.00 ex VAT<br />
SPORTS BUCKET SEATS<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Sports bucket Seat in a 1968<br />
Morgan +8, personalised<br />
coloured leather seat with<br />
Luke Pro-4 Harness<br />
TRADITIONAL SPORTS BUCKET SEAT<br />
A traditional sports bucket seat that holds the body snugly but comfortably. Base<br />
mounted, height 580mm, length 535mm <strong>and</strong> width 380mm. St<strong>and</strong>ard seats<br />
available in black PVC or black leather:<br />
Black PVC 090.316<br />
£457.13 each | £397.50 ex VAT<br />
Black leather 090.318<br />
£531.88 each | £462.50 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
CLASSIC<br />
Styled to recreate the looks of seats of<br />
the classic period <strong>and</strong> ideally suited to<br />
Minis, Triumph <strong>and</strong> MG sports cars.<br />
Black vinyl with white piping.<br />
St<strong>and</strong>ard: Height 540mm, length<br />
540mm <strong>and</strong> width 475mm 091.490<br />
£137.89 each | £119.90 ex VAT<br />
Wide: Height 540mm, length 540mm<br />
<strong>and</strong> width 520mm 094.868<br />
£149.39 each | £129.90 ex VAT<br />
Headrest 091.491<br />
£42.55 each | £37.00 ex VAT<br />
GT4 SEAT IN BLACK<br />
CLOTH/VINYL<br />
Originally designed in the 60s as a<br />
luxurious replacement for the Mk 1<br />
Escort, Capri <strong>and</strong> Mini, but equally at<br />
home in most cars of this era. Tubular<br />
steel construction, generous foam<br />
padding, trimmed in black cloth <strong>and</strong><br />
vinyl <strong>and</strong> finished with eyelets. Width<br />
at base 480mm, depth at base 680mm<br />
<strong>and</strong> height 590mm 094.877<br />
£171.64 each | £149.25 ex VAT<br />
PAIR OF PAINTED SEAT RUNNERS<br />
These runners are only 25mm (1") high. Comprises both the<br />
parts that fit to the seat <strong>and</strong> the parts that fit to the floor. One<br />
has a locking lever<br />
091.527 £51.75 each | £45.00 ex VAT<br />
TRADITIONAL SEATS<br />
ALPINE<br />
Styled to recreate the looks of seats of<br />
the classic period <strong>and</strong> ideally suited to<br />
Minis, Triumph <strong>and</strong> MG sports cars.<br />
The outer parts of the Seat are in black<br />
quilted effect vinyl <strong>and</strong> the centre in<br />
black cord.<br />
St<strong>and</strong>ard: Height 540mm, length<br />
540mm <strong>and</strong> width 475mm 091.492<br />
£160.89 each | £139.90 ex VAT<br />
Wide: Height 540mm, length 540mm<br />
<strong>and</strong> width 520mm 094.869<br />
£181.70 each | £158.00 ex VAT<br />
Headrest 091.493<br />
£42.55 each | £37.00 ex VAT<br />
GT4 SEAT IN BLACK VINYL<br />
Originally designed in the 60s as a<br />
luxurious replacement for the Mk 1<br />
Escort, Capri <strong>and</strong> Mini, but equally at<br />
home in most cars of this era. Tubular<br />
steel construction, generous foam<br />
padding, trimmed in black vinyl <strong>and</strong><br />
finished with eyelets. Width at base<br />
480mm, depth at base 680mm <strong>and</strong><br />
height 590mm 094.876<br />
£171.64 each | £149.25 ex VAT<br />
SEAT RUNNERS<br />
SEATS & BELTS<br />
SPORTSMAN RECLINER SEAT<br />
A reclining seat with a maximum width<br />
of 415mm for narrow sports car <strong>and</strong> kit<br />
car applications, it has a robust<br />
recline/tilt forward mechanism.<br />
Trimmed in black vinyl <strong>and</strong> supplied<br />
complete with headrest. Width over<br />
recline mechanism 415mm, depth at<br />
base 635mm, height to headrest<br />
580mm, height of headrest 130mm<br />
094.878<br />
£204.70 each | £178.00 ex VAT<br />
GT8 SEAT HIGHBACK<br />
COMPETITION STYLE SEAT<br />
A familiar sight on the grid in the 70s.<br />
Rigid steel construction with generous<br />
padding <strong>and</strong> a 5 slot harness facility.<br />
Can be base or side mounted.<br />
Trimmed in black vinyl <strong>and</strong> cloth <strong>and</strong><br />
finished with eyelets. Width at base<br />
480mm, depth at base 750mm, height<br />
890mm 094.879<br />
£212.75 each | £185.00 ex VAT<br />
PAIR OF PLATED SEAT RUNNERS<br />
As fitted on the MGA. Plated for protection. Comprises both<br />
the parts that fit to the seat <strong>and</strong> the parts that fit to the floor.<br />
Length 480mm.<br />
Left h<strong>and</strong> seat (locking lever on left h<strong>and</strong> runner)<br />
091.589 £44.85 each | £39.00 ex VAT<br />
Right h<strong>and</strong> (locking lever on the right h<strong>and</strong> runner)<br />
091.590 £44.85 each | £39.00 ex VAT<br />
49
50<br />
SEATS & BELTS<br />
LUKE G-MAX 3<br />
Lap <strong>and</strong> shoulder straps are 50mm<br />
wide with a single shoulder fixing<br />
(three point fixing). Made by LUKE<br />
<strong>and</strong> RAC/National Event Approved.<br />
This high spec Clubmans harness was<br />
launched in 1975 <strong>and</strong> has been constantly<br />
developed since. It offers<br />
superb value for money. Supplied<br />
without eye bolts <strong>and</strong> stress plates<br />
(see below). Black 090.419<br />
£55.20 each | £48.00 ex VAT<br />
LUKE PRO-4<br />
Lap <strong>and</strong> shoulder straps are 50mm<br />
wide with two shoulder fixings (four<br />
point fixing) with classic aircraft type<br />
rotary action release box. Made by<br />
LUKE <strong>and</strong> recommended for national<br />
motorsport including classic rallying.<br />
This high spec Clubman's harness<br />
was launched in 1975 <strong>and</strong> has been<br />
constantly developed since. It offers<br />
superb value for money. Supplied<br />
without eye bolts <strong>and</strong> stress plates<br />
(see below). Black 090.426<br />
£103.50 each | £90.00 ex VAT<br />
HARNESSES<br />
LUKE G-MAX 4<br />
Lap <strong>and</strong> shoulder straps are 50mm<br />
wide with two shoulder fixings (four<br />
point fixing). Made by LUKE <strong>and</strong><br />
RAC/National Event Approved. This<br />
high spec Clubmans harness was<br />
launched in 1975 <strong>and</strong> has been<br />
constantly developed since. They offer<br />
superb value for money. Supplied<br />
without eye bolts <strong>and</strong> stress plates<br />
(see below). Black 090.420<br />
£57.50 each | £50.00 ex VAT<br />
LUKE 2004 4 POINT FIA<br />
APPROVED<br />
Lap <strong>and</strong> shoulder straps are 75mm<br />
wide with two shoulder fixings (four<br />
point fixing). Made by LUKE, they are<br />
TYPE 2004 Homologated to FIA 98<br />
specification. Now m<strong>and</strong>atory for<br />
international motorsport events.<br />
Supplied without eye bolts <strong>and</strong> stress<br />
plates (see below). Black<br />
For left h<strong>and</strong> seat 090.441/L<br />
£172.50 each | £150.00 ex VAT<br />
For right h<strong>and</strong> seat 090.441/R<br />
£172.50 each | £150.00 ex VAT<br />
When undone the buckle will fall into<br />
the centre of the car<br />
HARNESS ACCESSORIES<br />
EYE BOLTS/STRESS PLATE<br />
Luke harnesses come without eye bolts or stress plates. Please order as required<br />
St<strong>and</strong>ard eye bolt 20mm thread 090.447 £2.19 each | £1.90 ex VAT<br />
Extra long eye bolt 30mm thread 090.448 £2.99 each | £2.60 ex VAT<br />
Stress plate 55mm x 55mm 090.450 £1.44 each | £1.25 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
LUKE PRO-3<br />
Lap <strong>and</strong> shoulder straps are 50mm<br />
wide with a single shoulder fixing<br />
(three point fixing) with classic aircraft<br />
type rotary action release box. Made<br />
by LUKE <strong>and</strong> recommended for<br />
national motorsport including classic<br />
rallying. This high spec Clubman's<br />
harness was launched in 1975 <strong>and</strong><br />
has been constantly developed since.<br />
It offers superb value for money.<br />
Supplied without eye bolts <strong>and</strong> stress<br />
plates (see below). Black 090.425<br />
£101.20 each | £88.00 ex VAT<br />
LUKE 2004 CATERHAM/LOTUS<br />
Special 4 point Harness for Lotus 7 or<br />
Caterham. Made by LUKE, they are<br />
TYPE 2004 Homogolated to FIA 98<br />
specification. Now m<strong>and</strong>atory for<br />
international motorsport events. LUKE<br />
on the shoulder pads. Supplied for<br />
bolt in fittings at ends<br />
For left h<strong>and</strong> seat 092.596<br />
£128.80 each £112.00 ex VAT<br />
For right h<strong>and</strong> seat 092.597<br />
£128.80 each £112.00 ex VAT<br />
When undone the buckle will fall into<br />
the centre of the car<br />
LUKE CRUTCH<br />
STRAPS<br />
Designed to be<br />
used as an<br />
addition to:<br />
Pro-3, Pro-4 <strong>and</strong><br />
Type 2004<br />
Single 092.598<br />
£13.80 each<br />
£12.00 ex VAT<br />
Double 092.599<br />
£16.10 each<br />
£14.00 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
INERTIA REEL<br />
E Marked by SECURON. The top<br />
fitting mounts on the 'B' post, the<br />
inertia reel at floor level below this.<br />
With stalk 150mm long suitable for<br />
mounting direct to the seat (if you have<br />
that type of seat) or to the side of the<br />
transmissiion tunnel or side sill<br />
090.452 £52.44 each | £45.60 ex VAT<br />
CHILDRENS HARNESS<br />
For approximate ages 4 to 9 years,<br />
with fitting kit for all car types<br />
090.444 £28.18 each £24.50 ex VAT<br />
SEAT BELTS<br />
ANGLE ADJUSTABLE<br />
INERTIA REEL<br />
E Marked by SECURON. Designed for<br />
2 door cars without door pillars or in<br />
the rear of the car for the rear seats.<br />
The reel can be mounted at an angle.<br />
Length of webbing is 2.6 metres. With<br />
stalk 150mm long suitable for<br />
mounting direct to the seat (if you have<br />
that type of seat) or to the side of the<br />
transmissiion tunnel or side sill<br />
090.442 £66.70 each | £58.00 ex VAT<br />
ANGLE ADJUSTABLE<br />
INERTIA REEL<br />
E Marked by SECURON. Designed for<br />
2 door cars without door pillars or in<br />
the rear of the car for the rear seats.<br />
The reel can be mounted at an angle.<br />
Length of webbing is 2.6 metres. With<br />
stalk 300mm long suitable for<br />
mounting at floor level 090.443<br />
£66.70 each | £58.00 ex VAT<br />
SEATS & BELTS<br />
INERTIA REEL<br />
E Marked by SECURON. The top<br />
fitting mounts on the 'B' post, the<br />
inertia reel at floor level below this.<br />
With stalk 300mm long suitable for<br />
mounting at floor level 090.452L<br />
£52.44 each | £45.60 ex VAT<br />
CLASSIC TYPE 3 POINT<br />
Static operation with chromed release<br />
buckle. Requires two eyebolts at floor<br />
level, refer to Part No. 090.447 or Part<br />
No. 090.448 <strong>and</strong> stress plates Part No.<br />
090.450 (see previous page), <strong>and</strong> is<br />
bolted in at shoulder level. If you don't<br />
have a fitting already in your car you<br />
will need a tapped plate to complete<br />
the installation 090.451<br />
£143.75 each | £125.00 ex VAT<br />
SECURON 3-POINT INERTIA REEL<br />
Two belts fix either side of the seat <strong>and</strong> then buckle up over the abdomen. From<br />
each of these belts are two more, that go over each shoulder <strong>and</strong> join to an inertia<br />
reel, allowing you to lean forward to operate switches etc. The reel is angle<br />
adjustable <strong>and</strong> can go on floor or bulkhead. In front of this reel is another buckle,<br />
allowing you to break the seat belt at this point, as required on sports cars like<br />
the Alfa Giulietta for raising <strong>and</strong> lowering the hood (top). Colour black<br />
092.600 £67.85 each | £59.00 ex VAT<br />
51
52<br />
STEERING WHEELS<br />
MOTO-LITA STEERING WHEELS<br />
MOTO-LITA have been designing <strong>and</strong> making custom steering wheels since the 1950’s. AC <strong>Car</strong>s,<br />
Aston Martin, Cooper <strong>Car</strong> Co., Caterham, Jensen, Lister, Lola, MG, Opel, Panther, Rolls-Royce,<br />
Rover, Saab, Shelby Mustang, Triumph, TVR <strong>and</strong> Vauxhall are some of the companies who have chosen MOTO-LITA steering<br />
wheels for their quality, enhanced driving comfort <strong>and</strong> good looks. MOTO-LITA steering wheels are designed <strong>and</strong> h<strong>and</strong><br />
built in Engl<strong>and</strong> by British craftsmen.<br />
The centres of Moto-Lita’s steering wheels are hewn from a sold billet of aluminium. With this in mind we’re afraid that you<br />
might have to wait a while if you order a 16” wheel <strong>and</strong> it’s not in stock. The solid cylinder of aluminum is very heavy <strong>and</strong> they<br />
don’t like picking it up <strong>and</strong> putting onto their cutting saw to make only one wheel! 16” wheels are made to order only<br />
Unless stated, for all of these steering wheels you will need a boss to fit it to your car. Please see the next page for details<br />
WOOD RIM STEERING WHEELS<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
The original classic British Wood Rim Steering Wheel. Built from selected cross-laminated wood which is bonded <strong>and</strong><br />
rivetted to a one piece, heavy gauge, h<strong>and</strong> polished, aluminium alloy frame. The underside of the rim has 36 carved finger<br />
notches. The rim is finished in a hardwearing deep lustre which is resistant to petrol, oil <strong>and</strong> the elements<br />
DERRINGTON SLOT<br />
With slots in the spokes<br />
Flat wheels:<br />
381mm (15”) 090.628<br />
£154.10 each | £134.00 ex VAT<br />
406mm (16”) 090.629<br />
£212.18 each | £184.50 ex VAT<br />
(VW Derrington was an aftermarket<br />
company supplying bolt-on-goodies in<br />
the classic era. Moto-Lita made<br />
Steering Wheels for them in period.<br />
Their particular feature is equally<br />
spaced spokes)<br />
CLASSIC THREE SPOKE<br />
WOOD RIM<br />
With holes in the spokes<br />
Flat wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
356(14”) 090.611 £154.10 £134.00<br />
381(15”) 090.612 £154.10 £134.00<br />
Dished wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
356(14”) 090.613 £154.10 £134.00<br />
381(15”) 090.614 £154.10 £134.00<br />
MARK THREE WOOD RIM<br />
With traditional drilled spokes<br />
Flat wheels:<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.053 £126.21 £109.75<br />
356(14”) 090.054 £126.21 £109.75<br />
381(15”) 090.055P£126.21 £109.75<br />
406(16”) 090.056 £212.18 £184.50<br />
Dished wheels:<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.057 £126.21 £109.75<br />
356(14”) 090.058 £126.21 £109.75<br />
381(15”) 090.059 £126.21 £109.75<br />
406(16”) 090.060 £212.18 £184.50<br />
CLASSIC THREE SPOKE<br />
WOOD RIM<br />
With slots in the spokes<br />
Flat wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
356(14”) 090.615 £154.10 £134.00<br />
381(15”) 090.080 £154.10 £134.00<br />
Dished wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
356(14”) 090.617 £154.10 £134.00<br />
381(15”) 090.618 £154.10 £134.00<br />
MARK THREE WOOD RIM<br />
With slots in the spokes<br />
Flat wheels:<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.063 £126.21 £109.75<br />
356(14”) 090.064 £126.21 £109.75<br />
381(15”) 090.065 £126.21 £109.75<br />
Dished wheels:<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.066 £126.21 £109.75<br />
356(14”) 090.067 £126.21 £109.75<br />
381(15”) 090.068 £126.21 £109.75<br />
CLASSIC FOUR SPOKE<br />
WOOD RIM<br />
<strong>Classic</strong> four spoke. Like the Bentley<br />
Boys wheels! Laminated wood <strong>and</strong><br />
rivetted rim<br />
Flat wheel only<br />
Dia (mm) Part No. Price each ex VAT<br />
356(14”) 090.050 £154.10 £134.00<br />
381(15”) 090.051 £154.10 £134.00<br />
406(16”) 090.052 £212.18 £184.50
Website open 24hrs everey day<br />
www.holden.co.uk<br />
ASTON MARTIN REPLICA<br />
A true replica of the Aston Martin<br />
DB2/3/4/5/6 steering wheel<br />
Flat wheel only<br />
406mm (16”) 090.953<br />
£234.60 each | £204.00 ex VAT<br />
JAGUAR ‘E’ TYPE REPLICA<br />
True replicas of the works Jaguar ‘E’<br />
Type wheel as fitted as original<br />
equipment for Series 1 & 1 1 ⁄2 cars<br />
Flat wheels only<br />
Dia (mm) Part No. Price each ex VAT<br />
381(15”) 090.061 £202.40 £176.00<br />
406(16”) 090.062 £202.40 £176.00<br />
MARK FOUR LEATHER RIM<br />
With slots in the spokes<br />
Flat wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.625 £126.21 £109.75<br />
356(14”) 090.626 £126.21 £109.75<br />
381(15”) 090.627 £126.21 £109.75<br />
STEERING WHEELS<br />
MOTO-LITA WOOD RIM STEERING WHEELS<br />
AC COBRA REPLICA<br />
A true replica of the original AC Cobra<br />
split centre steering wheel. Fits the<br />
original Cobra boss<br />
381mm (15”) 090.954<br />
£234.60 each | £204.00 ex VAT<br />
JAGUAR ‘D’ TYPE REPLICA<br />
A true replica of the Le Mans winning<br />
Jaguar ‘D’ Type steering wheel<br />
Flat wheel only<br />
381mm (15”) 090.088<br />
£239.20 | £208.00 ex VAT<br />
MOTO-LITA LEATHER RIM STEERING WHEELS<br />
MGA REPLICA & BOSS<br />
For the MGA we offer this 432mm<br />
(17”) diameter wood rim steering<br />
wheel, which is supplied complete<br />
with the boss to fit to the cars st<strong>and</strong>ard<br />
column <strong>and</strong> with the MG badge in the<br />
centre 090.090<br />
£381.80 each | £332.00 ex VAT<br />
These replica steering wheels<br />
require a special Boss & Horn Push<br />
which can be found on the following<br />
pages:<br />
Aston Martin Boss Page 54<br />
AC Cobra Boss Page 54<br />
Jaguar ‘E’ Type Boss Page 54<br />
Jaguar ‘E’ Type Horn Push Page 54<br />
The classic British leather rim steering wheel, suitable for virtually all cars from a 50’s sports car to the latest saloon. Made<br />
from top quality black leather, h<strong>and</strong>sewn over a natural rubber h<strong>and</strong>grip, with each spoke having an integral soft padded<br />
thumb grip. The traditionally drilled heavy gauge aluminium alloy spokes can be either anodised matt black or polished.<br />
MARK FOUR LEATHER RIM<br />
With polished spokes<br />
Flat wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
279(11”) 090.079* £126.21 £109.75<br />
305(12”) 090.091* £126.21 £109.75<br />
330(13”) 090.082 £126.21 £109.75<br />
356(14”) 090.083 £126.21 £109.75<br />
Dished wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.947 £126.21 £109.75<br />
356(14”) 090.077 £126.21 £109.75<br />
*No holes in the spokes<br />
MARK FOUR LEATHER RIM<br />
With matt black spokes<br />
Flat wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.073 £126.21 £109.75<br />
356(14”) 090.074 £126.21 £109.75<br />
381(15”) 090.075 £126.21 £109.75<br />
Dished wheels<br />
Dia (mm) Part No. Price each ex VAT<br />
330(13”) 090.076 £126.21 £109.75<br />
356(14”) 090.081 £126.21 £109.75<br />
381(15”) 090.078 £126.21 £109.75<br />
53
54<br />
STEERING WHEELS<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
MOTO-LITA LEATHER RIM STEERING WHEELS<br />
MARK 4 (SOLID SPOKES) DISHED SVA REGULATED<br />
LEATHER STEERING WHEEL<br />
Diameter 356mm (14”). Plain polished spokes. Designed to<br />
meet the SVA Regulations for kit cars<br />
090.099 £126.21 each | £109.75 ex VAT<br />
BOSSES FOR MOTO-LITA STEERING WHEELS<br />
Mota-Lita bosses are machined from aluminium alloy castings <strong>and</strong> are stove enamelled wrinkle black. Each boss is splined<br />
to fit a particular steering column, <strong>and</strong> enables you to fit the Moto-Lita steering wheel of your choice. It is important to have<br />
the correct boss for your car. Please select a boss from the list below. If your car is not included here please phone our order<br />
line with details of your car: make, model <strong>and</strong> year<br />
Bosses come fitted with either a plain cap or with a horn push which are moulded from black plastic <strong>and</strong> have a finish to<br />
match the boss. They have a indent to take a decal. They are supplied with an appropriate decal<br />
Make Model Type Boss Price each Ex Vat<br />
of Part No.<br />
Wheel<br />
AC Ace/Aceca. Accepts OE horn control F 098.B7 £68.43 £59.50<br />
AC Cobra D 098.B25 £45.43 £39.50<br />
Aston Martin DB2/DB3/DB4 F 098.B24H £68.43 £59.50<br />
Aston Martin DB5/DB6 F/D 098.B49A/9H £56.93 £49.50<br />
Aston Martin DBS (wood or leather rim) D 098.B49A/9H £56.93 £49.50<br />
Aston Martin V8 D 098.F23EH £68.43 £59.50<br />
Austin Healey 100/4, 100/6, 3000 with adjustable column. Accepts OE horn control F 098.B7 £68.43 £59.50<br />
Austin Healey 100/4, 100/6, 3000 with non-adjustable column. Accepts OE horn control F 098.B6 £56.93 £49.50<br />
Austin Healey Sprite Mk 1/2 F 098.B4H £45.43 £39.50<br />
Austin Healey Sprite Mk 3 F 098.B25H £45.43 £39.50<br />
Austin Healey Sprite Mk 4 F 098.B25CH £45.43 £39.50<br />
Austin Rover Cooper Mk 1 F/D 098.B1H £45.43 £39.50<br />
Caterham 1600 GT Sprint/1700 Sprint/Ford 1600GT F 098.B20H £45.43 £39.50<br />
Daimler Double Six <strong>and</strong> Sovereign '74 on F 098.B54H £45.43 £39.50<br />
Daimler 250, Sovereign <strong>and</strong> Double Six to '73 F 098.B33H £45.43 £39.50<br />
Daimler SP250 with adjustable column. Accepts OE horn control F 098.B7 £68.43 £59.50<br />
Daimler SP250 with non adjustable column F 098.B1H £45.43 £39.50<br />
Daimler SP250 with non-adjustable column. Accepts OE horn control F 098.B22OE £68.43 £59.50<br />
Ford 1600E D 098.B18 £45.43 £39.50<br />
Ford Anglia 105E D 098.B14 £56.93 £49.50<br />
Hillman Imp D 098.B27 £56.93 £49.50<br />
Jaguar E Type F 098.B33H £45.43 £39.50<br />
Jaguar E Type for original column F 090.596 £104.65 £91.00<br />
Jaguar Mk 2 Saloon/Mk 10 Saloon/420/XJ6/XJ12 to '73 F 098.B33H £45.43 £39.50<br />
Jaguar Mk 8/9. Accepts original horn control F 098.B32OE £45.43 £39.50<br />
Jaguar XJ6/XJ12 '74 to '86 F 098.B54H £45.43 £39.50<br />
Jaguar XJ6/XJ12 '87 on F 098.B54AH £68.43 £59.50<br />
Jaguar XJS to '89 F 098.B54H £45.43 £39.50<br />
Jaguar XJS '90 on F 098.B54CH £68.43 £59.50<br />
Jaguar XK120 F 098.B7H £68.43 £59.50<br />
Jaguar XK120 to accept original horn control etc. F 098.B7XK120OE £104.65 £91.00<br />
Jaguar XK140/XK150/ Mk 1 Saloon F 098.B32OE £45.43 £39.50
Website open 24hrs everey day<br />
www.holden.co.uk<br />
STEERING WHEELS<br />
BOSSES FOR MOTO-LITA STEERING WHEELS<br />
Make Model Type Boss Price each Ex Vat<br />
of Part No.<br />
Wheel<br />
Jensen Director/FF <strong>and</strong> Interceptor to ‘72 F 098.B24H £68.43 £59.50<br />
Jensen Interceptor '73-'83 F 098.B49J £56.93 £49.50<br />
Jensen Interceptor 1984 0n (6 hole fitting) F 098.B49JBH £56.93 £49.50<br />
Jensen Jensen Healey F/D 098.B35JH £56.93 £49.50<br />
L<strong>and</strong> Rover SWB 1973-87 D 098.B45 £45.43 £39.50<br />
Lotus 7 <strong>and</strong> Super 7 F 098.B20H £45.43 £39.50<br />
Lotus Cortina '65 on D 098.B18 £45.43 £39.50<br />
Lotus Eclat D 098.B20CH £45.43 £39.50<br />
Lotus Elan D 098.B20H £45.43 £39.50<br />
Lotus Elan 2 + 2 '73 on D 098.B44 £45.43 £39.50<br />
Lotus Elan 2 + 2 to '72 <strong>and</strong> Elite Mk 2 D 098.B20H £45.43 £39.50<br />
Lotus Esprit D 098.B20B £45.43 £39.50<br />
Lotus Europa to '73 D 098.B20H £45.43 £39.50<br />
Lotus Sunbeam D 098.F73 £45.43 £39.50<br />
MG TC F 098.B24 £68.43 £59.50<br />
MG TD, TF F 098.B8 £45.43 £39.50<br />
MG MGA F 098.B1 £45.43 £39.50<br />
MG MGB or MGC to '69 F/D 098.B25H £45.43 £39.50<br />
MG MGB '70 F/D 098.B25BH £45.43 £39.50<br />
MG MGB '71-'76 F/D 098.B25CH £45.43 £39.50<br />
MG MGB '77-'78 F/D 098.B25DH £45.43 £39.50<br />
MG MGB '79-80 F/D 098.B25D £45.43 £39.50<br />
MG Midget Mk 1 F 098.B4H £45.43 £39.50<br />
MG Midget Mk 2/3 <strong>and</strong> Mk 4 to '70 F 098.B25H £45.43 £39.50<br />
MG Midget Mk 4 '71 on F 098.B25CH £45.43 £39.50<br />
Mini 850 Mk 1 F/D 098.B1H £45.43 £39.50<br />
Mini 850 Mk 2 F/D 098.B1 £45.43 £39.50<br />
Mini 1000 F/D 098.B25 £45.43 £39.50<br />
Mini Mk 1 to take OE Horn Control F/D 098.B1OE £68.43 £59.50<br />
Mini Aug '77 on F/D 098.B45 £45.43 £39.50<br />
Mini Clubman F/D 098.B25 £45.43 £39.50<br />
Morgan 4/4, +4, plus 8 '98 on F 098.B71H £104.65 £91.00<br />
Morgan 4/4 '<strong>and</strong> plus 8, 70 on F 098.B25B £45.43 £39.50<br />
Morgan 4/4 <strong>and</strong> plus 8 to ‘70 F 098.B13 £56.93 £49.50<br />
Morgan Aero 8 F 098.B86 £104.65 £91.00<br />
Morgan Plus 4 to 1965 F 098.B13 £56.93 £49.50<br />
Morris 1100 Mk 2, 1300, GT, Clubman F/D 098.B25 £45.43 £39.50<br />
Morris Minor Side Valve F 098.B8 £45.43 £39.50<br />
Morris Minor 1000 D 098.B1H £45.43 £39.50<br />
Reliant Scimitar '70-'76 D 098.B44 £45.43 £39.50<br />
Reliant Scimitar '77 on D 098.B40A £56.93 £49.50<br />
Reliant Scimitar to '69 D 098.B20 £45.43 £39.50<br />
Sunbeam Alpine Adjustable Column F/D 098.B30H £68.43 £59.50<br />
Sunbeam Alpine Non Adjustable F/D 098.B29 £56.93 £49.50<br />
Sunbeam Tiger Adjustable Column F/D 098.B30H £68.43 £59.50<br />
Triumph Dolomite F/D 098.B23A £45.43 £39.50<br />
Triumph GT6 to '68 F/D 098.B20H £45.43 £39.50<br />
Triumph GT6 '69 on F/D 098.B20AH £45.43 £39.50<br />
Triumph Herald, Spitfire to ‘78 F/D 098.B20H £45.43 £39.50<br />
Triumph Spitfire '79 on F/D 098.B45 £45.43 £39.50<br />
Triumph Stag, Sprint F/D 098.B23A £45.43 £39.50<br />
Triumph TR2 non adjustable column. Accepts OE horn control F 098.B22OE £68.43 £59.50<br />
Triumph TR2 with adjustable column. Accepts OE horn control F 098.B7T £68.43 £59.50<br />
Triumph TR3 non adjustable F 098.B1H £45.43 £39.50<br />
Triumph TR3 with adjustable column. Accepts OE horn control F 098.B7T £68.43 £59.50<br />
Triumph TR4 & A F/D 098.B20H £45.43 £39.50<br />
Triumph TR5 F/D 098.B20AH £45.43 £39.50<br />
Triumph TR6 <strong>and</strong> Vitesse F/D 098.B20H £45.43 £39.50<br />
TVR All Models to '69 F/D 098.B20H £45.43 £39.50<br />
TVR All Models '70 to '87 F/D 098.B45 £45.43 £39.50<br />
55
56<br />
STEERING WHEELS<br />
MG BLACK CELLULOSE-ACETATE RIM<br />
Manufactured in Engl<strong>and</strong> using the original Bluemel tooling <strong>and</strong> traditional<br />
materials. The spokes are stainless steel with chrome separators. For<br />
pre-war N, P, TA, L Types & post-war TC, TD, TF , MGA Types<br />
394mm (15.5”) 090.621 £181.70 each | £158.00 ex VAT<br />
432mm (17”) 090.620 £181.70 each | £158.00 ex VAT<br />
BOSS FOR OTHER CARS<br />
This unbored boss enables steering<br />
wheels Part Nos 090.620 <strong>and</strong> 090.621<br />
to be fitted to cars of other makes.<br />
Supplied with four bolts/nuts/washers<br />
which clamp parts together 090.624<br />
£86.25 each | £75.00 ex VAT<br />
CAP<br />
Without indent for decal<br />
Small size (screws seen) 090.518<br />
£33.35 each | £29.00 ex VAT<br />
Large size (screws hidden) 090.517<br />
£33.35 each | £29.00 ex VAT<br />
CAP<br />
With indent for decal<br />
Small size (screws seen) 090.520<br />
£33.35 each | £29.00 ex VAT<br />
Large size (screws hidden) 090.519<br />
£33.35 each | £29.00 ex VAT<br />
BLUEMEL STEERING WHEELS<br />
A<br />
B<br />
C<br />
D<br />
E<br />
81mm<br />
44mm<br />
BILLET HORN PUSHES & CAPS<br />
HORN PUSH<br />
Without indent for decal<br />
Small size (screws seen) 090.089<br />
£56.35 each | £49.00 ex VAT<br />
Large size (screws hidden) 090.086<br />
£56.35 each | £49.00 ex VAT<br />
HORN PUSH<br />
With indent for decal<br />
Small size (screws seen) 090.504<br />
£56.35 each | £49.00 ex VAT<br />
Large size (screws hidden) 090.503<br />
£56.35 each | £49.00 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
60mm<br />
BOSS FOR PRE-WAR MGS<br />
This boss enables the rim on the left to<br />
be fitted to:<br />
Pre-war MG’s including N, P, TA, L<br />
Types<br />
090.622 £86.25 each | £75.00 ex VAT<br />
Post-war MG’s including TC, TD, TF,<br />
MGA Types<br />
090.623 £86.25 each | £75.00 ex VAT<br />
A) Brass disc suitable for<br />
engraving/etching or replacing with<br />
logo etc relating to your car<br />
B) Top plate<br />
C) Bluemels steering wheel fits here<br />
into slots provided<br />
D) Cast aluminium boss. You will need<br />
to machine it to suit the column of<br />
your car. This could involve<br />
machining a taper, a spline or a<br />
keyway, <strong>and</strong> slitting <strong>and</strong> cross<br />
drilling it to make it clamp your<br />
column. Surfaces are polished<br />
E) Bosses for cross drilling<br />
The wrinkle black centre of Moto-Lita Bosses can be replaced with a horn push or cap machined from solid aluminium billet<br />
<strong>and</strong> polished. When fitted, the centre of your steering wheel is polished aluminium (no black showing). They are available<br />
in two sizes. The smaller one allows the ring of screws securing the steering wheel to the boss to be seen <strong>and</strong> the larger<br />
size covers those screws. If you have a horn push in the centre of your steering wheel order a horn push, <strong>and</strong> if you don’t<br />
then order the cap. Both are available with or without an indent for a decal. The decals we have are shown below:<br />
JAGUAR E TYPE HORN PUSH<br />
We also offer a special horn push for<br />
the Jaguar E Type. Suits steering<br />
wheels Part No. 090.061 & Part No.<br />
090.062 (page xx) 090.500<br />
£55.20 each | £48.00 ex VAT<br />
SPACER<br />
Fits between a Moto-Lita boss <strong>and</strong><br />
their steering wheel to bring the latter<br />
19mm ( 3 ⁄4”) closer to you. Black<br />
crackle finish. Supplied with 9 longer<br />
screws to secure the steering wheel<br />
through the spacer into the boss<br />
090.608 £33.35 each | £29.00 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
FRICTION DISC<br />
2.5mm thick for 3 1 ⁄2”<br />
065.054<br />
£5.06 each | £4.40 ex VAT<br />
4.5mm thick for 3 1 ⁄2”<br />
065.055<br />
£5.06 each | £4.40 ex VAT<br />
2.5mm thick for 4 1 ⁄2”<br />
065.065<br />
£5.24 each | £4.56 ex VAT<br />
4.5mm thick for 4 1 ⁄2”<br />
065.066<br />
£5.24 each | £4.56 ex VAT<br />
CENTRE BOLT & NUT<br />
Single disc for 3 1 ⁄2” <strong>and</strong> 4 1 ⁄2”<br />
065.057<br />
£8.46 each | £7.36 ex VAT<br />
Multiple disc 3 1 ⁄2” <strong>and</strong> 4 1 ⁄2”<br />
065.058<br />
£9.11 each | £7.92 ex VAT<br />
SHOCK ABSORBERS<br />
New improved friction discs, specially treated <strong>and</strong><br />
impregnated, to resist the weather <strong>and</strong> give a smooth<br />
damping action under the most extreme working conditions<br />
A self locking indicator clearly<br />
registering the degree of adjustment<br />
which cannot work loose<br />
Dual control springs on either side of<br />
the shock absorber giving an accurate<br />
pressure adjustment<br />
New type non-corrosive friction plates<br />
unaffected by weather conditions<br />
Arms length<br />
31 ⁄2” Diameter<br />
Single Disc<br />
1 blade into 2<br />
BRASS DISC<br />
For 3 1 ⁄2” 065.061<br />
£6.72 each | £5.84 ex VAT<br />
For 4 1 ⁄2” 065.069<br />
£8.56 each | £7.44 ex VAT<br />
POINTER & LOCKING TAG<br />
For 3 1 ⁄2” <strong>and</strong> 4 1 ⁄2” 065.062<br />
£7.73 each | £6.72 ex VAT<br />
BUSHES<br />
Rubber Bush for 3 1 ⁄2” <strong>and</strong><br />
4 1 ⁄2” 065.064<br />
£15.64 each | £13.60 ex VAT<br />
Centre Bush for 3 1 ⁄2” <strong>and</strong><br />
4 1 ⁄2” 065.056<br />
£6.44 each | £5.60 ex VAT<br />
SHOCK ABSORBERS<br />
Andre Hartford Shock Absorbers are suitable for use on all makes of vintage car, <strong>and</strong> for all<br />
types of road <strong>and</strong> track events. This is the latest high efficiency model<br />
31 ⁄2” Diameter<br />
Multiple Disc<br />
2 blades into 3<br />
41 ⁄2” Diameter<br />
Single Disc<br />
1 blade into 2<br />
All shock absorber arms are finished in black enamel, with 3 colour indicator dial. Bolt, stars <strong>and</strong> locking rings are bright<br />
cadmium finish. Brass interleaving rings <strong>and</strong> wood friction discs in natural finish.<br />
Length of arms is measured from the centre of the indicator disc to the centre of each mounting bush. If you require shock<br />
absorbers with unequal length arms, please ask our Help Line for a quotation, prices are higher than with equal length arms<br />
STAR SPRING<br />
For 3 1 ⁄2” 065.059<br />
£13.71 each | £11.92 ex VAT<br />
For 4 1 ⁄2” 065.067<br />
£14.72 each | £12.80 ex VAT<br />
LOCATING RING<br />
For 3 1 ⁄2” <strong>and</strong> 4 1 ⁄2” 065.063<br />
£2.58 each | £2.24 ex VAT<br />
Sizes Suitable for<br />
use on cars<br />
up to:<br />
3 1 ⁄2” single disc 1 tonne<br />
3 1 ⁄2” multiple disc 2 tonne<br />
4 1 ⁄2” single disc 1 1 ⁄2 tonne<br />
4 1 ⁄2” multiple disc 2 tonne<br />
(1 tonne = 20 cwt)<br />
All arms are fitted with rubber bushes.<br />
These require no lubrication or<br />
attention, always remain silent in<br />
action, <strong>and</strong> have a long life.<br />
4 1 ⁄2” Diameter<br />
Multiple Disc<br />
2 blades into 3<br />
4 1 ⁄2” 065.001 065.012 065.023 065.036<br />
5” 065.002 065.013 065.024 065.037<br />
5 1 ⁄2 065.003 065.014 065.025 065.038<br />
6” 065.004 065.015 065.026 065.039<br />
6 1 ⁄2” 065.005 065.016 065.027 065.040<br />
7” 065.006 065.017 065.028 065.041<br />
7 1 ⁄2” 065.007 065.018 065.029 065.042<br />
8” 065.008 065.019 065.030 065.043<br />
8 1 ⁄2” 065.009 065.020 065.031 065.044<br />
9” 065.010 065.021 065.032 065.045<br />
9 1 ⁄2” 065.033 065.046<br />
10” 065.034 065.047<br />
Price each £103.50 | £90.00 ex VAT £138.00 | £120.00 ex VAT £109.25 | £95.00 ex VAT £143.75 | £125.00 ex VAT<br />
NUTS<br />
Special Castle Nut 1 ⁄2” BSF,<br />
deep slotted, countersunk<br />
065.052<br />
£5.69 each | £4.95 ex VAT<br />
St<strong>and</strong>ard 1 ⁄2” BSF Full Nuts<br />
065.053<br />
£1.43 each | £1.24 ex VAT<br />
INDICATOR DIAL<br />
With backplate<br />
For 3 1 ⁄2” 065.060<br />
£10.12 each | £8.80 ex VAT<br />
For 4 1 ⁄2” 065.068<br />
£10.12 each | £8.80 ex VAT<br />
CHASSIS<br />
MOUNTING BOLT<br />
Overall length 111mm,<br />
length of hexagonal portion<br />
27mm 065.051<br />
£15.32 each | £13.32 ex VAT<br />
Overall length 111mm,<br />
length of hexagonal portion<br />
17.5mm 065.050<br />
£14.72 each | £12.80 ex VAT<br />
Overall length 82.5mm,<br />
length of hexagonal portion<br />
4.75mm 065.049<br />
£14.72 each | £12.80 ex VAT<br />
57
58<br />
ACCESSORIES<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
Vacuum gauges are a convenient <strong>and</strong> accurate way of balancing carburettors on multi carburettor engines. These quality<br />
gauges are used by home mechanics <strong>and</strong> professional race teams. Every set is h<strong>and</strong>-built to exact engineering tolerances<br />
with brass internals housed in a powder coated steel <strong>and</strong> chromed case. The 63mm diameter dials give a clear reading.<br />
The gauges themselves come pre-damped <strong>and</strong> ready to use complete with 1 metre of neoprene hose per gauge <strong>and</strong> a set<br />
of adaptors. However, for most installations the adaptors shown below may be the most convenient method of picking up<br />
the vacuum just downstream of each carburettor<br />
Chromed rim on powder<br />
coated steel case<br />
Calibrated in cm HG from<br />
0 to 76 <strong>and</strong> in HG from 0 to 30<br />
CHAIN OILING KIT<br />
The Scottoiler Mk7 Universal System<br />
goes on <strong>and</strong> off with the engine <strong>and</strong><br />
enables the chain to be cleaned <strong>and</strong><br />
lubricated whilst the engine is on. It<br />
requires connecting into the vacuum<br />
between carburettor <strong>and</strong> engine <strong>and</strong><br />
the oil dispensing assembly can be<br />
bolted to the end, or glued to the<br />
underside of the swing arm. The Kit<br />
includes universal fittings <strong>and</strong> 500ml<br />
bottle of Scottoil (enough for approximately<br />
5,000 miles).<br />
060.700 £68.46 each | £59.53 ex VAT<br />
250ml Refill<br />
015.825 £3.86 each | £3.36 ex VAT<br />
VACUUM GAUGES<br />
Set of Two Gauges 070.410<br />
£51.38 each | £44.68 ex VAT<br />
Set of Three Gauges 070.411<br />
£66.80 each | £58.09 ex VAT<br />
CHAIN OILING KIT<br />
The Scottoiler Touring System consists<br />
of a high capacity reservoir <strong>and</strong> a<br />
remote metering valve that fits neatly<br />
behind the number plate increasing<br />
system capacity over 060.700 by eight<br />
times, also includes fittings to suit<br />
most bikes <strong>and</strong> 500ml Scottoil. Not<br />
suitable for Aprilia Capo Nord, Futura;<br />
Ducati ST4S; Honda VFR800VTec,<br />
Blackbird (can fit, needs to be lowered<br />
to clear seat keyhole); MV Agusta-All.<br />
060.701 £88.50 each | £76.96 ex VAT<br />
250ml Refill<br />
015.825 £3.86 each | £3.36 ex VAT<br />
Set of Four Gauges 070.412<br />
£87.40 each | £76.00 ex VAT<br />
Set of Six Gauges 070.413<br />
£123.31 each | £107.23 ex VAT<br />
SCOTTOIL AUTOMATIC CHAIN LUBRICATION SYSTEM<br />
Picture coming<br />
soon<br />
Picture coming<br />
soon<br />
Picture coming<br />
soon<br />
DUAL INJECTOR FOR 060.700/701<br />
An optional extra to 060.700 <strong>and</strong><br />
060.701 the Scottoiler Dual Injector<br />
provides a second supply of oil to<br />
clean <strong>and</strong> lubricate the chain. Not<br />
suitable for Ducati 749, 999; Honda<br />
VFR800 VTec. Honda VFR750 &<br />
VFR800i owners please telephone us<br />
before ordering on 01885 488 488<br />
060.702 £19.53 each | £16.98 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
CLUTCH/BRAKE LEVERS<br />
(145mm LONG)<br />
In steel with plain ends. For 7/8" (22<br />
mm) H<strong>and</strong>lebars. Length from pivot to<br />
end of lever 145 mm. One clutch <strong>and</strong><br />
one brake lever, sold as a pair<br />
060.540 £28.69 each | £24.95 ex VAT<br />
Picture coming<br />
soon<br />
TWIST GRIP NO. 74 (NO<br />
RUBBERS)<br />
For 1" (25 mm) diameter h<strong>and</strong>lebars<br />
060.614 £19.41 each | £16.88 ex VAT<br />
UNIVERSAL PILLION FOOTRESTS<br />
Supplied complete with rubbers<br />
060.750 £16.62 each | £14.45 ex VAT<br />
MATCHLESS KNEE GRIP SET<br />
Supplied as a pair for either side of the<br />
tank<br />
060.570 £23.00 each | £20.00 ex VAT<br />
MATCHLESS TANK BADGE<br />
Original Equipment Part No. 18896<br />
096.767<br />
£34.50 a pair | £30.00 ex VAT<br />
MOTORCYCLE ACCESSORIES<br />
DOHERTY CLUTCH/BRAKE<br />
LEVERS 208PA STYLE (150mm)<br />
Doherty 208PA style steel Levers with<br />
ball ends. For 7/8" (22 mm) h<strong>and</strong>lebars.<br />
Length from pivot to end of lever<br />
150 mm. One clutch lever <strong>and</strong> one<br />
brake lever, sold as a pair<br />
060.543 £28.69 each | £24.95 ex VAT<br />
DOHERTY TWIST GRIP<br />
For 7/8" (22mm) h<strong>and</strong>lebars<br />
060.550 £21.85 each | £19.00 ex VAT<br />
VALVE EXTENSION 90 DEGREES<br />
Extends your tyre valve to make<br />
access easier<br />
094.949 £4.54 each | £3.95 ex VAT<br />
EARLY BSA KNEE GRIP SET<br />
Supplied as a pair for either side of the<br />
tank. Original Equipment Part Nos. 65-<br />
8314/15<br />
060.572 £23.00 each | £20.00 ex VAT<br />
TRIUMPH (3 GALLON) BADGES<br />
For both sides of tank. Original part<br />
no. 82-4127/28 096.768<br />
£51.75 a pair | £45.00 ex VAT<br />
ACCESSORIES<br />
DUAL CONTROL LEVERS<br />
Dual levers for air <strong>and</strong> ignition. Goes<br />
on right h<strong>and</strong> h<strong>and</strong>lebar of 7/8"<br />
diameter<br />
060.549 £41.69 each | £36.25 ex VAT<br />
UNIVERSAL PROP STAND<br />
Clamps on to 7/8" diameter frame<br />
060.618 £28.92 each | £25.15 ex VAT<br />
RUBBER GROMMET BSA LOGO<br />
Grommet with BSA logo for petrol tank<br />
015.253<br />
£4.20 each | £3.65 ex VAT<br />
PAIR OF BACKING RUBBERS<br />
FOR MATCHLESS BADGE<br />
Backing Rubber for Matchless Petrol<br />
Tank Badge 096.767 096.759<br />
£13.17 a pair | £11.45 ex VAT<br />
TRIUMPH TANK BADGES<br />
Sold as a pair for both sides of the<br />
tank 096.842<br />
£44.85 a pair | £39.00 ex VAT<br />
59
60<br />
ACCESSORIES<br />
FORD CROSSFLOW<br />
ROCKER COVER<br />
Polished aluminium, with oil<br />
filler cap<br />
015.303<br />
£67.85 each<br />
£59.00 ex VAT<br />
MGA/MGB<br />
ROCKER COVER<br />
Polished aluminium, with oil<br />
filler cap <strong>and</strong> 'MG' cast into<br />
the rocker cover<br />
015.307<br />
£67.85 each<br />
£59.00 ex VAT<br />
ROCKER COVERS<br />
MGB ROCKER COVER<br />
Aluminium with black<br />
crackle finish <strong>and</strong> polished<br />
ribs with MG cast in to the<br />
rocker cover <strong>and</strong> chromed<br />
oil filler cap<br />
015.314<br />
£56.35 each<br />
£49.00 ex VAT<br />
TRIUMPH SPITFIRE/<br />
MIDGET 1500 COVER<br />
Aluminium with black<br />
crackle finish <strong>and</strong> polished<br />
ribs with pipe for breather<br />
<strong>and</strong> chromed oil filler cap<br />
015.315<br />
£60.95 each<br />
£53.00 ex VAT<br />
MORE ROCKER COVERS CAN BE FOUND ON OUR WEBSITE<br />
MODEL 58 COMPASS<br />
Rugged & compact, 58mm black<br />
compass card with direct reading<br />
scale. Universal bracket, enabling you<br />
to mount it vertically, horizontally,<br />
upside down or anywhere in between.<br />
Steel pivot <strong>and</strong> sapphire jewel, built in<br />
magnetic compensators <strong>and</strong> night<br />
lighting 091.812<br />
£54.57 each | £47.45 ex VAT<br />
Spare Bulb for above 091.798<br />
£9.32 each | £8.10 ex VAT<br />
Chrome plated steel, st<strong>and</strong>ard model<br />
090.136 £5.98 each | £5.20 ex VAT<br />
Allen key<br />
supplied.<br />
Anodised aluminium with invisible<br />
fixing pads. 090.157<br />
£18.98 each | £16.50 ex VAT<br />
COMPASSES<br />
MODEL M70BC<br />
This Compass is suitable for off road<br />
rallying. It can be subjected to<br />
unlimited tilting fore <strong>and</strong> aft, <strong>and</strong> up to<br />
30 degrees side to side. The dial is<br />
60mm dia <strong>and</strong> the housing is 115mm<br />
across. Illumination for 12V is<br />
included. It can be mounted almost<br />
anywhere, vertically, horizontally,<br />
sloping or hanging from the roof<br />
091.857<br />
£102.35 each | £89.00 ex VAT<br />
LICENCE HOLDERS<br />
De luxe stainless steel body, chrome<br />
on brass rim.<br />
090.137 £8.63 each | £7.50 ex VAT<br />
MG brown on cream ‘adhesive’ type<br />
090.141 £3.44 each | £2.99 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
MAP COMPASS<br />
With a protractor baseplate with<br />
magnifying lens for use on maps <strong>and</strong><br />
with lanyard 091.899<br />
£5.69 each | £4.95 ex VAT<br />
Suction type, chrome back<br />
090.148 £8.54 each | £7.43 ex VAT<br />
MG cream on brown ‘adhesive’ type<br />
090.142 £3.44 each | £2.99 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
For MGB 1972 on. The lid<br />
opens by pivoting<br />
backwards. Can also be<br />
fitted to other cars.<br />
Requires hole 66 x 53mm.<br />
Depth 37mm. You will need<br />
to make up a fitting that<br />
matches up with the spring<br />
clip at the front<br />
090.854<br />
£17.19 each | £14.95 ex VAT<br />
GEAR LEVER KNOBS<br />
As supplied as an extra on<br />
MGAs. Fits on top of the<br />
transmission tunnel by two<br />
hidden screws (not<br />
included) so can be fitted to<br />
almost any car. 90 x 80mm<br />
across <strong>and</strong> approx 40mm<br />
tall. Lid <strong>and</strong> removable tray<br />
are chrome, surround is<br />
crackle black. Apart from<br />
the finish this is the same as<br />
part number 090.856<br />
090.855<br />
£22.94 each | £19.95 ex VAT<br />
ASH TRAYS<br />
ACCESSORIES<br />
The Monte range of Gear Knobs is still being manufactured by the original 1960’s factory in genuine wood or leather, with a<br />
choice of decals as shown below. They are especially suitable for cars of the 50’s <strong>and</strong> 60’s. They are easy to fit<br />
Continental<br />
Wood<br />
091.970<br />
£9.20 each<br />
£8.00 ex VAT<br />
Dumpy Wood<br />
091.974<br />
£9.20 each<br />
£8.00 ex VAT<br />
St<strong>and</strong>ard Wood<br />
091.972<br />
£9.20 each<br />
£8.00 ex VAT<br />
The GTO Gear Lever Knob is machined from billet<br />
aluminium. There are three versions:<br />
With no<br />
provision for a<br />
decal<br />
091.227<br />
£22.94 each<br />
£19.95 ex VAT<br />
For gearboxes<br />
where the knob<br />
is lifted to obtain<br />
reverse. With<br />
provision for<br />
decal<br />
091.228<br />
£21.28 each<br />
£18.50 ex VAT<br />
St<strong>and</strong>ard<br />
gearboxes. With<br />
provision for<br />
decal<br />
091.229<br />
£21.28 each<br />
£18.50 ex VAT<br />
Continental<br />
Leather<br />
091.971<br />
£9.20 each<br />
£8.00 ex VAT<br />
MGB Gear Lever<br />
Knob up to<br />
1967. Plastic<br />
with a brass<br />
insert tapped<br />
5/16" UNF<br />
091.226<br />
£11.44 each<br />
£9.95 ex VAT<br />
As fitted to Sprites <strong>and</strong><br />
Midgets. Fits on top of the<br />
transmission tunnel by two<br />
hidden screws (not<br />
included) so can be fitted to<br />
almost any car. 90 x 80mm<br />
across <strong>and</strong> approx 40mm<br />
tall. Lid <strong>and</strong> surround are<br />
crackle black, removable<br />
tray is chrome. Apart from<br />
finish this is the same as<br />
part number 090.855<br />
090.856<br />
£22.94 each | £19.95 ex VAT<br />
Dumpy Leather<br />
091.975<br />
£9.20 each<br />
£8.00 ex VAT<br />
4-speed<br />
091.730<br />
£2.19 each<br />
£1.90 ex VAT<br />
5-speed<br />
091.731<br />
£2.19 each<br />
£1.90 ex VAT<br />
St<strong>and</strong>ard<br />
Leather<br />
091.973<br />
£9.20 each<br />
£8.00 ex VAT<br />
4-speed<br />
091.735<br />
£2.19 each<br />
£1.90 ex VAT<br />
5-speed<br />
091.732<br />
£2.19 each<br />
£1.90 ex VAT<br />
Fits Austin Healey BN1 to<br />
BJ8. Lid opens by pivoting<br />
backwards. Can also be<br />
fitted to other cars. Requires<br />
hole 61 x 52mm (2.4" x<br />
2.05"). Depth 45mm. You<br />
will need to make up a<br />
fitting that matches up with<br />
the spring clip at the back.<br />
Casing <strong>and</strong> removable tray<br />
are made from castings.<br />
Lid, tray lid <strong>and</strong> surround<br />
are chromed 090.857<br />
£27.54 each | £23.95 ex VAT<br />
61
62<br />
ACCESSORIES<br />
GREAT BRITAIN<br />
Chrome on ABS <strong>and</strong><br />
complete with tie bars for<br />
mounting on your grille or<br />
on any flat surface. Approx<br />
89mm diameter 092.215<br />
£14.38 each | £12.50 ex VAT<br />
A pair of enamelled Union<br />
Jacks for each side of your<br />
car. 52 x 29mm 090.719<br />
£15.07 pair | £13.10 ex VAT<br />
Two Union Jack stickers, 80<br />
x 50mm 090.709<br />
£4.14 pair | £3.60 ex VAT<br />
Union Jack sticker, 145 x<br />
95mm 090.698<br />
£1.90 each | £1.65 ex VAT<br />
Union Jack sticker, 230 x<br />
145mm 090.699<br />
£2.24 each | £1.95 ex VAT<br />
“Safety Fast” rosette<br />
transfer 090.815<br />
£4.72 each | £4.10 ex VAT<br />
Chrome on brass,<br />
letters 76mm (3”) tall<br />
with studs & nuts for<br />
fixing 090.322<br />
£18.40 each<br />
£16.00 ex VAT<br />
BADGES TRANSFERS & STICKERS<br />
SCOTLAND<br />
Chrome on ABS <strong>and</strong><br />
complete with tie bars for<br />
mounting on your grille or<br />
on any flat surface. Approx<br />
89mm diameter 092.216<br />
£14.38 each | £12.50 ex VAT<br />
A pair of enamelled ‘Cross<br />
of St. George’. 52 x 29mm<br />
090.820<br />
£15.07 pair | £13.10 ex VAT<br />
A Union Jack <strong>and</strong> a<br />
chequered flag sticker<br />
095.894<br />
£7.99 pair | £6.95 ex VAT<br />
“British Leyl<strong>and</strong> Special<br />
Tuning Abingdon” transfer,<br />
78 x 95mm 090.814<br />
£4.72 each | £4.10 ex VAT<br />
Stainless steel with<br />
adhesive backing,<br />
85mm (3.4”) tall<br />
094.340<br />
£12.88 each<br />
£11.20 ex VAT<br />
GB PLATES<br />
Small GB letters in an<br />
oval frame. Adhesive<br />
backed. Frame is<br />
100 x 75mm<br />
094.342<br />
£6.84 each<br />
£5.95 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
WALES<br />
Chrome on ABS <strong>and</strong><br />
complete with tie bars for<br />
mounting on your grille or<br />
on any flat surface. Approx<br />
89mm diameter 092.217<br />
£14.38 each | £12.50 ex VAT<br />
A pair of enamelled ‘Cross<br />
of St. Andrew’. 60 x 37mm<br />
090.823<br />
£15.07 pair | £13.10 ex VAT<br />
“BMC Special Tuning<br />
Abingdon” rosette transfer<br />
090.706<br />
£4.72 each | £4.10 ex VAT<br />
Castrol Oils car bodywork<br />
sticker.. 250mm diameter<br />
090.705<br />
£3.80 each | £3.30 ex VAT<br />
Oval plate 7” x 5”,<br />
black raised letters<br />
76 mm (3”) tall on<br />
white background<br />
090.323<br />
£11.39 each<br />
£9.90 ex VAT<br />
ST. CHRISTOPHER<br />
Chrome on ABS <strong>and</strong><br />
complete with tie bars for<br />
mounting on your grille or<br />
on any flat surface. Approx<br />
89mm diameter 092.218<br />
£14.38 each | £12.50 ex VAT<br />
A pair of enamelled ‘USA<br />
Stars & Stripes’. 60 x 36mm<br />
090.824<br />
£22.94 pair | £19.95 ex VAT<br />
“BMC British Motor<br />
Corporation” rosette transfer.<br />
090.707<br />
£4.72 each | £4.10 ex VAT<br />
Reproduction of an original<br />
RAC Badge 092.219<br />
£33.35 each | £29.00 ex VAT<br />
Sticker. Black letters<br />
on a white oval with an<br />
adhesive backing.<br />
112mm x 77mm<br />
094.343<br />
£1.44 each<br />
£1.25 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk ACCESSORIES<br />
GREAT BRITAIN<br />
Chrome on brass badge,<br />
approx size 111 x 92mm<br />
092.210<br />
£15.53 each | £13.50 ex VAT<br />
SCOTLAND<br />
Chrome on brass badge,<br />
approx size 111 x 92mm<br />
092.211<br />
£15.53 each | £13.50 ex VAT<br />
A badge bar with cast supports at each end, chrome<br />
plated, with a straight stainless steel tube 560mm long <strong>and</strong><br />
four chrome plated on brass badge clips<br />
090.324 £38.04 each | £33.08 ex VAT<br />
If you have space above your number plate this is a neat<br />
way of mounting badges on a badge bar. This straight<br />
stainless steel bar (565mm long) is supplied with two<br />
stainless steel brackets that you can fit behind your<br />
numberplate (you can mount two badges direct on here).<br />
Also included are four badge clips, chrome plated on brass<br />
090.345 £38.04 each | £33.08 ex VAT<br />
AC COBRA SIDE SCREENS<br />
With chrome fittings:<br />
Toughened glass 040.040<br />
£59.80 each | £52.00 ex VAT<br />
Perspex 040.040P<br />
£59.80 each | £52.00 ex VAT<br />
BADGE BARS, BADGES & MASCOT<br />
WALES<br />
Chrome on brass badge,<br />
approx size 111 x 92mm<br />
092.212<br />
£15.53 each | £13.50 ex VAT<br />
A badge bar with cast supports at each end, chrome<br />
plated, with a stainless steel tube having slight crank in the<br />
centre 560mm long <strong>and</strong> four chrome plated on brass badge<br />
clips 090.320 £38.04 each | £33.08 ex VAT<br />
With all these badge bars<br />
you can use this badge bar<br />
clip 090.320CLIP<br />
£3.75 each | £3.26 ex VAT<br />
AERO SCREENS & SIDE SCREENS<br />
ST. CHRISTOPHER<br />
Chrome on brass badge,<br />
approx size 111 x 92mm<br />
092.213<br />
£15.53 each | £13.50 ex VAT<br />
Jaguar Mascot, high<br />
quality, chrome, 190 x<br />
60mm 091.222<br />
£62.10 each | £54.00 ex VAT<br />
AERO SCREENS<br />
Choice of two made with Triplex laminated glass conforming to RAC competition<br />
regulations. Polished aluminium frame with chrome fittings. Width 406mm (16”)<br />
Radiused head 090.138 £88.55 each | £77.00 ex VAT<br />
Square cut head 090.139 £88.55 each | £77.00 ex VAT<br />
Aero screen support brackets including Allen key <strong>and</strong> rubbers. Either a spare<br />
part or for fitting to your other car enabling you to transfer your Aero screen over<br />
090.096 £18.98 set | £16.50 ex VAT<br />
SUN VISORS<br />
Made from tinted perspex with chrome friction hinges.<br />
105mm x 350mm<br />
Smoke 040.041 £54.00 each | £46.96 ex VAT<br />
Green 040.042 £54.00 each | £46.96 ex VAT<br />
Blue 040.043 £54.00 each | £46.96 ex VAT<br />
63
64<br />
ACCESSORIES<br />
380mm<br />
MG TC BOOT RACK<br />
Tailor made to fit above the petrol tank <strong>and</strong> spare wheel of<br />
the MG TC<br />
Chrome plated 094.080 £166.75 each | £145.00 ex VAT<br />
Stainless steel 094.081 £166.75 each | £145.00 ex VAT<br />
380mm<br />
895mm<br />
Two brackets<br />
at front of rack<br />
Two brackets at rear of rack<br />
895mm<br />
Two brackets at front of<br />
rack (painted black)<br />
Two brackets<br />
at rear of rack<br />
MG TF BOOT RACK<br />
Tailor made to fit above the petrol tank <strong>and</strong> spare wheel of<br />
the MG TF. Shown above <strong>and</strong> right<br />
Chrome plated 094.084 £189.75 each | £165.00 ex VAT<br />
Stainless steel 094.085 £189.75 each | £165.00 ex VAT<br />
BOOT RACKS<br />
Length<br />
adjustment<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
The ‘Works Pattern’ Boot Racks on these two pages are<br />
designed <strong>and</strong> tailor made for permanent fitment to specific<br />
cars <strong>and</strong> are supplied with all fittings<br />
380mm<br />
895mm<br />
Two brackets at front<br />
of rack fit to existing<br />
bolts on car<br />
Two brackets at rear of rack fit to existing bolts on car<br />
MG TD BOOT RACK<br />
Tailor made to fit above the petrol tank <strong>and</strong> spare wheel of<br />
the MG TD. Chrome plated steel<br />
094.082 £104.34 each | £90.73 ex VAT<br />
490mm<br />
830mm<br />
Two supports at rear of rack.<br />
Also supplied are two<br />
brackets requiring 4 small<br />
holes in the lip of the boot lid<br />
AUSTIN HEALEY 3000 BOOT RACK<br />
Tailor made to fit the boot lid of the Austin Healey 3000.<br />
Chrome plated. Fits to boot hinges at the front (special bolts<br />
supplied) <strong>and</strong> st<strong>and</strong>s on the bumper at the rear. Brackets,<br />
bolts, nuts, washers <strong>and</strong> gaskets supplied. Shown above<br />
<strong>and</strong> right 094.090 £155.94 each | £135.60 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk ACCESSORIES<br />
BOOT RACKS<br />
These Boot Racks are designed <strong>and</strong> tailor made for permanent fitment to specific cars <strong>and</strong> are supplied with all fitttings<br />
335mm<br />
875mm<br />
990mm<br />
AUSTIN HEALEY FROGEYE SPRITE BOOT RACK<br />
Tailor made to fit the tail of the Frogeye Sprite. Chrome<br />
plated. Fitting requires 4 holes in the panel. Bolts, nuts,<br />
washers <strong>and</strong> gaskets supplied<br />
094.092 £156.40 each | £136.00 ex VAT<br />
380mm<br />
915mm<br />
Hinge<br />
end<br />
TR2/3/3A BOOT RACK<br />
Tailor made to fit the boot lid of the TR2/3/3a. Fits to boot<br />
hinges at the front <strong>and</strong> clamps under the lip of the boot at<br />
the rear. Brackets, bolts, nuts, washers <strong>and</strong> gaskets<br />
supplied<br />
Chrome plated 094.096 £183.43 each | £159.50 ex VAT<br />
Stainless steel 094.097 £183.43 each | £159.50 ex VAT<br />
630mm<br />
405 mm<br />
930mm<br />
435 mm<br />
780mm<br />
MGB/MGC BOOT RACK<br />
Tailor made in stainless steel to fit the boot lid of the<br />
MGB/MGC. Bolts, nuts, washers <strong>and</strong> gaskets supplied.<br />
Fitting requires 6 holes in boot lid 094.089<br />
£166.75 each | £145.00 ex VAT<br />
440mm<br />
380mm<br />
460mm<br />
880mm<br />
MG MIDGET BOOT RACK<br />
Tailor made in stainless steel to fit the boot lid of the MG<br />
Midget/Austin Healey Sprite (not Frogeye). Fitting requires<br />
4 holes in the bootlid. Bolts, nuts, washers <strong>and</strong> gaskets<br />
supplied 094.095 £155.25 each | £135.00 ex VAT<br />
825mm<br />
Hinge<br />
end<br />
TR4/4A/5 BOOT RACK<br />
Tailor made to fit the boot lid of the TR4/4A/5. Brackets<br />
supplied to fit under boot hinges at the front <strong>and</strong> behind the<br />
numberplate at the rear. Bolts, Nyloc nuts, washers <strong>and</strong><br />
rubber washers supplied<br />
Chrome plated 094.078 £165.14 each | £143.60 ex VAT<br />
Stainless steel 094.079 £165.14 each | £143.60 ex VAT<br />
TR6 BOOT RACK<br />
(Left) Tailor made in stainless steel to fit the boot lid of the<br />
TR6. Platform size 865mm wide x 530mm deep. Fitting<br />
requires 4 holes in the bootlid 094.101<br />
£189.75 each | £165.00 ex VAT<br />
405mm<br />
440mm<br />
775mm<br />
MGA BOOT RACK<br />
Tailor made to fit the boot lid of the MGA. Bolts, nuts,<br />
washers <strong>and</strong> gaskets supplied. Fitting requires 6 holes in<br />
boot lid<br />
Chrome Plated 094.086 £156.40 each | £136.00 ex VAT<br />
Stainless Steel 094.087 £156.40 each | £136.00 ex VAT<br />
65
66<br />
ACCESSORIES<br />
UNIVERSAL BOOT RACKS<br />
Platform size 880mm wide x 375mm deep<br />
Polished aluminium tube.<br />
092.723 £74.75 each | £65.00 ex VAT<br />
Polished stainless steel <strong>and</strong> guaranteed against corrosion.<br />
092.722 £97.75 each | £85.00 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
These Boot Racks can be used on the boot lids of many models of classic car. They sit on four rubber feet on the boot lid<br />
<strong>and</strong> are retained on the edge of the lid by adjustable clamps. The clamps can be fitted to either the outer (as shown below)<br />
or inner bars. Alternatively, the four feet are tapped M6 <strong>and</strong> it would be possible to bolt through your boot lid into the feet to<br />
secure the rack permanently. The racks have a raised section at the back to retain your luggage<br />
515mm<br />
560mm<br />
690mm minimum,1360mm maximum<br />
SPARES FOR BOOT RACKS 092.722 TO 092.729<br />
Set of four Rubber Feet 092.747 £17.02 each | £14.80 ex VAT<br />
Spare fitting kit as supplied with these racks 092.748 £13.80 each | £12.00 ex VAT<br />
As above but made in stainless steel 092.749 £13.80 each | £12.00 ex VAT<br />
LEATHER LUGGAGE STRAPS<br />
Ideal for securing your picnic hamper or suitcase on your<br />
car’s luggage rack. H<strong>and</strong> stitched with brass buckles. A set<br />
comprises two straps each approximately 1 1 ⁄2 metres long x<br />
25mm wide <strong>and</strong> a cross strap<br />
Brown 090.163 £59.80 each | £52.00 ex VAT<br />
Black 090.166 £59.80 each | £52.00 ex VAT<br />
Tan 090.162 £59.80 each | £52.00 ex VAT<br />
BOOT RACKS<br />
515mm<br />
LUGGAGE STRAPS<br />
560mm<br />
690mm minimum,1360mm maximum<br />
CLASSIC BOOT RACKS<br />
Platform size 880mm wide x 375mm deep<br />
Aluminium with three wood slats.<br />
092.729 £74.69 each | £64.95 ex VAT<br />
Polished stainless steel tube <strong>and</strong> guaranteed against<br />
corrosion, with three wood slats.<br />
092.728 £97.66 each | £84.92 ex VAT<br />
Black<br />
NUMBER PLATES<br />
Brown<br />
Tan<br />
CROSS STRAPS<br />
Approximately 480mm long<br />
x 25mm wide <strong>and</strong> are<br />
available separately:<br />
Brown 090.165<br />
£10.93 each | £9.50 ex VAT<br />
Black 090.164<br />
£10.93 each | £9.50 ex VAT<br />
Tan 090.161<br />
£10.93 each | £9.50 ex VAT<br />
ABC789D ABC789D<br />
Black Adhesive number plates 090.817<br />
£3.45 each | £3.00 ex VAT<br />
White 80mm (3 1 ⁄8”) Adhesive Registration Digits, letters <strong>and</strong><br />
numbers. Please state your requirements<br />
090.780 to 812 £0.48 each | £0.42 ex VAT<br />
Please note that number plates with black backgrounds are<br />
only legal on vehicles registered before August 1973<br />
RATCHET STRAPS<br />
25mm wide x 5 metres long.<br />
Black 094.350<br />
£7.48 each | £6.50 ex VAT<br />
50mm wide x 7 metres long.<br />
Red 094.351<br />
£18.98 each | £16.50 ex VAT<br />
Particularly useful<br />
on trailers<br />
White Adhesive number plates 090.818<br />
£3.45 each | £3.00 ex VAT<br />
Black 80mm (3 1 ⁄8”) Adhesive Registration Digits, letters <strong>and</strong><br />
numbers. Please state your requirements<br />
094.880 to 094.912 £0.48 each | £0.42 ex VAT<br />
When ordering number plates please write or type your<br />
registration number very clearly<br />
Please note that we are no longer able to supply pressed aluminium number plates
Website open 24hrs everey day<br />
www.holden.co.uk CAR BODY PARTS<br />
TRIUMPH FITTING<br />
KIT FOR HARDTOP<br />
Fitting Kit for Hardtop<br />
060.236 for Triumph<br />
TR2/3/3A<br />
060.466<br />
£114.98 each<br />
£99.98 ex VAT<br />
PHONE FOR<br />
AVAILABILITY FOR<br />
OTHER FIXING KITS<br />
WHEEL SPINNERS<br />
These are quality wheel spinners, sometimes called hub nuts. ‘Right’ <strong>and</strong> ‘Left’ indicate that the wheel spinner is for the right<br />
or left h<strong>and</strong> side of the car<br />
PLAIN SPINNERS 42mm 8 T.P.I.<br />
For Austin Healey late 3000 Mk III, Austin Healey Sprite, MG<br />
Midget, MGB, some Morgans from 1949, Triumph TR2,<br />
TR3/TR3a, TR4/TR4a, TR5, TR6<br />
Right h<strong>and</strong> side of car 060.602<br />
£37.95 each | £33.00 ex VAT<br />
Left h<strong>and</strong> side of car 060.603<br />
£37.95 each | £33.00 ex VAT<br />
JAGUAR<br />
WHEEL SPINNERS<br />
For Jaguars. These fit<br />
hubs 52mm diameter<br />
Right h<strong>and</strong> side of car<br />
060.600<br />
£52.90 each | £46.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.601<br />
£52.90 each | £46.00 ex VAT<br />
PLAIN SPINNERS<br />
42mm 12 T.P.I.<br />
For MGA late 1500 on (not<br />
Twin Cam), Austin Healey<br />
100, Austin Healey early<br />
3000 Mk III<br />
Right h<strong>and</strong> side of car<br />
060.606<br />
£37.95 each | £33.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.607<br />
£37.95 each | £33.00 ex VAT<br />
HARD TOPS<br />
Model Part number Price<br />
MORGAN SPINNERS<br />
42mm 8 T.P.I.<br />
For some Morgans from<br />
1949<br />
Right h<strong>and</strong> side of car<br />
060.604<br />
£52.90 each | £46.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.605<br />
£52.90 each | £46.00 ex VAT<br />
MG SPINNERS<br />
42mm 12 T.P.I.<br />
For pre-war <strong>and</strong> most pre<br />
1962 MGs, T Types up to<br />
TF <strong>and</strong> MGA early 1500<br />
Right h<strong>and</strong> side of car<br />
060.654<br />
£37.95 each | £33.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.655<br />
£37.95 each | £33.00 ex VAT<br />
A high quality glass<br />
reinforced plastic hardtop<br />
with a superblack gel coat<br />
which does not require<br />
painting. The interior is grey<br />
flock sprayed. It comes<br />
complete with plastic<br />
window <strong>and</strong> all rubber<br />
seals. In design it is a<br />
replica of the original works<br />
supplied hardtop. <strong>Car</strong>riage<br />
subject to quotation<br />
Austin Healey Frogeye Sprite 060.232 £471.21 each | £409.75 ex VAT<br />
MG Midget/Austin Healey Sprite 060.233 £413.71 each | £359.75 ex VAT<br />
MGA 060.230 £452.24 each | £393.25 ex VAT<br />
MGB 060.231 £442.75 each | £385.00 ex VAT<br />
Triumph Spitfire Mk I/II/III 060.234 £420.15 each | £365.35 ex VAT<br />
Triumph Spitfire Mk IV 060.235 £433.84 each | £377.25 ex VAT<br />
Triumph TR2/3/3A 1953-1961 060.236 £483.00 each | £420.00 ex VAT<br />
Triumph TR6 060.237 £459.71 each | £399.75 ex VAT<br />
Picture coming<br />
soon<br />
Picture coming<br />
soon<br />
AC ACE SPINNERS<br />
42mm 8 T.P.I.<br />
For the AC Ace<br />
Right h<strong>and</strong> side of car<br />
060.650<br />
£67.85 each | £59.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.651<br />
£67.85 each | £59.00 ex VAT<br />
Picture coming<br />
soon<br />
RILEY SPINNERS<br />
42MM 8 T.P.I.<br />
For Rileys<br />
Right h<strong>and</strong> side of car<br />
060.652<br />
£67.85 each | £59.00 ex VAT<br />
Left h<strong>and</strong> side of car<br />
060.653<br />
£67.85 each | £59.00 ex VAT<br />
67
68<br />
CAR BODY PARTS<br />
HOOK PLATE<br />
To use with 060.050 & 060.218<br />
060.052<br />
£1.73 each | £1.50 ex VAT<br />
STRAIGHT TYPE BONNET CATCH<br />
Chrome plated 060.051<br />
£23.00 each | £20.00 ex VAT<br />
BONNET CATCH & HOOK<br />
As shown, body diameter 13mm ( 1 ⁄2”).<br />
Chromed 060.053<br />
£27.80 each | £24.17 ex VAT<br />
OVER CENTRE CLIPS<br />
Chrome plated 060.059<br />
£9.78 a pair | £8.50 ex VAT<br />
BONNET CATCHES, HOOKS & PINS<br />
NICKEL PLATED ANCHOR HOOK<br />
For use with 060.055 060.057<br />
£1.73 each | £1.50 ex VAT<br />
STRAIGHT TYPE BONNET CATCH<br />
Stainless steel, T h<strong>and</strong>le at top<br />
060.218<br />
£13.74 each | £11.95 ex VAT<br />
BONNET CATCH & HOOK<br />
As shown, body diameter 16mm ( 5 ⁄8”).<br />
Chromed 060.054<br />
£34.53 each | £30.03 ex VAT<br />
LOCKABLE OVER CENTRE CLIPS<br />
Chrome plated. Can be locked using a<br />
padlock 060.060<br />
£10.35 a pair | £9.00 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
SPRING TYPE BONNET CATCH<br />
Nickel plated catch 136mm long<br />
060.055<br />
£3.52 each | £3.06 ex VAT<br />
RIGHT ANGLED TYPE<br />
BONNET CATCH<br />
Right angled at the bottom. Chrome<br />
plated 060.050<br />
£23.00 each | £20.00 ex VAT<br />
OVER CENTRE BONNET CATCH<br />
114mm (4 1 ⁄2”) tall <strong>and</strong> 25mm (1”) wide.<br />
Chromed 060.058<br />
£27.68 each | £24.07 ex VAT<br />
SMALL RUBBER CATCHES<br />
65mm overall height 060.064<br />
£7.02 a pair | £6.10 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
LARGE RUBBER CATCHES<br />
125mm overall height 060.065<br />
£8.17 a pair | £7.10 ex VAT<br />
BLACK LONG LEATHER STRAPS<br />
Please specify your own lengths,<br />
either by phoning our Help Line or by<br />
e-mail sales@holden.co.uk. 091.669<br />
From £59.00 per pair inc VAT<br />
LINED LEATHER BONNET STRAPS<br />
Leather strap 50mm (2 in) wide with<br />
substantial plated buckle. Wool like<br />
lining on the inside to help reduce<br />
damage to the paintwork on your<br />
bonnet. As supplied length adjustable<br />
via the buckle from 2.055 metres (6 ft<br />
9 in) to 1.880 metres (6 ft 2 in) but you<br />
can shorten it further by cutting <strong>and</strong><br />
retrimming the ends<br />
Black 091.766<br />
£103.44 a pair | £89.95 ex VAT<br />
DARK BROWN LACING<br />
FOR COWLS & SCUTTLES<br />
13mm ( 1 ⁄2”) wide x 1750mm (5ft 9”)<br />
long. Complete with packet of rivets.<br />
Used between cowls/scuttles <strong>and</strong><br />
bonnets since the Model T! 060.216<br />
£11.44 each | £9.95 ex VAT<br />
LACING FOR RADIATOR SHELLS<br />
9mm ( 3 ⁄8”) wide x 1525mm (5ft) long.<br />
Used between radiator shells <strong>and</strong><br />
bonnets since the Model T! Dark<br />
brown 060.215<br />
£6.33 each | £5.50 ex VAT<br />
CAR BODY PARTS<br />
LEATHER BONNET STRAPS & ACCESSORIES<br />
COMPETITION BONNET PINS<br />
Suitable for bonnet or boot 060.061<br />
£14.42 a pair | £12.54 ex VAT<br />
SHORT LEATHER STRAPS<br />
Black short leather straps with<br />
stainless steel covers on ends<br />
091.290<br />
£21.41 a pair | £18.62 ex VAT<br />
LINED LEATHER BONNET STRAPS<br />
Leather strap 50mm (2 in) wide with<br />
substantial plated buckle. Wool like<br />
lining on the inside to help reduce<br />
damage to the paintwork on your<br />
bonnet. As supplied length adjustable<br />
via the buckle from 2.055 metres (6 ft<br />
9 in) to 1.880 metres (6 ft 2 in) but you<br />
can shorten it further by cutting <strong>and</strong><br />
retrimming the ends<br />
Brown 091.767<br />
£103.44 a pair | £89.95 ex VAT<br />
HEAVY DUTY BONNET PINS<br />
Heavier duty than 060.061 060.062<br />
£9.78 a pair | £8.50 ex VAT<br />
SHORT LEATHER STRAPS<br />
Brown short leather straps with<br />
stainless steel covers on ends<br />
091.348<br />
£21.41 a pair | £18.62 ex VAT<br />
CABLE FOR BONNET RELEASE<br />
Has picture of car with bonnet up on<br />
the T h<strong>and</strong>le. Length of cable 1.5<br />
metres. Requires 9.5mm diameter<br />
hole in dash or bulkhead 060.069<br />
£6.84 each | £5.95 ex VAT<br />
3 LEGGED BONNET HANDLE<br />
146mm (5 3 ⁄4“) x 63.5mm (2 1 ⁄2”) overall.<br />
Chromed 060.066<br />
£12.47 each | £10.84 ex VAT<br />
69
70<br />
CAR BODY PARTS<br />
WINDOW WINDER<br />
Chrome with black plastic knob.<br />
Hexagon fixing 1 1 ⁄8” (28mm) across.<br />
Suits Jaguar 'E' Type <strong>and</strong> can replace<br />
Mini, MGB, Midget h<strong>and</strong>les. 060.081<br />
£21.85 each | £19.00 ex VAT<br />
WINDOW WINDER<br />
As fitted to upmarket cars, chrome<br />
plated die casting. Fits 3 ⁄8” (9.5mm)<br />
square shaft <strong>and</strong> secures with pin.<br />
Complete with spring loaded<br />
escutcheon 060.129<br />
£34.44 each | £29.95 ex VAT<br />
DOOR LATCHES<br />
As fitted to the left h<strong>and</strong> door in MG<br />
TC/TD/TF <strong>and</strong> Austin Healey, but can<br />
be fitted to other cars. Has provision<br />
for operation by outside door h<strong>and</strong>le<br />
with 5 ⁄16” square shaft. Chrome plated<br />
060.220<br />
£39.39 each | £34.25 ex VAT<br />
STRIKER MG TC<br />
Door Striker, as fitted to MG TC.<br />
Complete with screws. Not h<strong>and</strong>ed.<br />
Use with latches 060.220 & 060.221.<br />
Chrome plated 060.222<br />
£29.77 each | £25.89 ex VAT<br />
IMPROVED LOCK<br />
Improved chrome locking exterior<br />
door lock for MGB, Midget, TR6. It<br />
has a threaded body & steel securing<br />
nut instead of a spring clip fastening<br />
<strong>and</strong> is supplied with 2 keys 060.040<br />
£24.16 per pair | £21.01 ex VAT<br />
INTERIOR HANDLES & DOOR PULLS<br />
WINDOW WINDER<br />
Black plastic with chromed centre to<br />
knob. Hexagon fixing 1 1 ⁄8” (28mm)<br />
across 060.121<br />
£4.62 each | £4.02 ex VAT<br />
DOOR HANDLE<br />
Fits 5 ⁄16” square shaft. 95mm overall<br />
length. Chrome finish 060.082<br />
£16.71 each | £14.53 ex VAT<br />
DOOR LATCH–RIGHT HAND<br />
As fitted to the right h<strong>and</strong> door in MG<br />
TC/TD/TF <strong>and</strong> Austin Healey, but<br />
can be fitted to other cars. Has<br />
provision for operation by outside<br />
door h<strong>and</strong>le with 5 ⁄16” square shaft.<br />
Chrome plated 060.221<br />
£39.39 each | £34.25 ex VAT<br />
STRIKER MG TD/TF<br />
Door Striker, as fitted to MG TD/TF.<br />
Complete with screws. Not h<strong>and</strong>ed.<br />
Use with latches 060.220 <strong>and</strong><br />
060.221. Chromed 060.223<br />
£29.77 each | £25.89 ex VAT<br />
CHROME KNOB<br />
Approx 19mm diameter, 16mm tall.<br />
Requires a 1 ⁄4" UNF nut to complete. As<br />
fitted to the Austin Healey Sprite <strong>and</strong><br />
MG Midget up to 1963<br />
060.790 £7.48 each | £6.50 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
WINDOW WINDER<br />
Black plastic with chromed knob <strong>and</strong><br />
bezel. Fits 3 ⁄8” (9.5mm) square shaft.<br />
Matches 060.123 below 060.124<br />
£5.07 each | £4.41 ex VAT<br />
DOOR HANDLE<br />
Black plastic with chromed bezel. Fits<br />
3 ⁄8” (9.5mm) square shaft. Matches<br />
part number 060.124 above 060.123<br />
£4.83 each | £4.20 ex VAT<br />
SWIVEL TYPE DOOR PULL<br />
Black with chrome ends. Holes are at<br />
117.5mm (4 5 ⁄8“) centres 060.122<br />
£5.46 each | £4.75 ex VAT<br />
STRIKER AUSTIN HEALEY<br />
Door Striker, as fitted to Austin<br />
Healey. Complete with screws. Not<br />
h<strong>and</strong>ed. Use with latches 060.220 &<br />
/060.221. Chromed 060.224<br />
£29.77 each | £25.89 ex VAT<br />
PLASTIC KNOB<br />
Approx 22mm diameter, 26mm tall.<br />
Requires an M5 screw to complete. As<br />
fitted to the heater vent door on MGs<br />
060.791 £6.61 each | £5.75 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
FLUTED DOOR HANDLE<br />
This h<strong>and</strong>le is 108mm (4 1 ⁄4”) long. Hole<br />
centres in plate are approx 36mm<br />
(1.43") apart. Shaft is 5 ⁄16” square <strong>and</strong><br />
127mm (5") long. Chrome plated<br />
Locking 060.031<br />
£39.10 each | £34.00 ex VAT<br />
Non-locking 060.032<br />
£32.20 each | £28.00 ex VAT<br />
MINI MK I 1961-6 LOCKING<br />
DOOR HANDLE<br />
For Mini Mk I 1961-1966. Shaft is 5 ⁄16”<br />
square <strong>and</strong> 127mm (5”) long. Chrome<br />
plated 060.038<br />
£80.82 per pair | £70.28 ex VAT<br />
SWIVEL TYPE DOOR PULL<br />
Suits many early cars, including, TR3,<br />
TR4, early Spitfire, Austin Healey,<br />
Alfa Romeo Giulietta Spider. Holes<br />
are at 121mm (4 3 ⁄4 “) centres. Chromed<br />
060.020<br />
£25.30 each | £22.00 ex VAT<br />
LOCKABLE BOOT HANDLE<br />
For MG Y Series, Morris 8<br />
etc. H<strong>and</strong>le is 9mm (3 3 ⁄4”)<br />
overall width, holes in plate<br />
are at approx 44mm (1.75”)<br />
centres, Shaft is 5 ⁄16” square<br />
<strong>and</strong> 127mm (5”) long.<br />
Chromed 060.001<br />
£34.50 each | £30.00 ex VAT<br />
EXTERIOR HANDLES<br />
'DICK BARTON' DOOR HANDLE<br />
This h<strong>and</strong>le is 105mm (4 1 ⁄8”) long. Hole<br />
centres in plate are approx 44mm<br />
(1.75”) apart. Shaft is 5 ⁄16” square <strong>and</strong><br />
127mm (5”) long. Chrome plated<br />
Locking 060.033<br />
£39.10 each | £34.00 ex VAT<br />
Non-locking 060.034<br />
£34.50 each | £30.00 ex VAT<br />
MINI MK II 1966-9 LOCKING<br />
DOOR HANDLE<br />
For Mini Mk II 1966-1969. Shaft is 5 ⁄16“<br />
square <strong>and</strong> 127mm (5”) long. Chrome<br />
plated 060.039<br />
£92.00 per pair | £80.00 ex VAT<br />
GRAB HANDLES<br />
CHROMED C TYPE GRAB HANDLE<br />
Holes are at 101mm (4”) centres.<br />
060.021<br />
£32.20 each | £28.00 ex VAT<br />
BOOT/BONNET HANDLES<br />
LOCKABLE BOOT HANDLE<br />
H<strong>and</strong>le is 108mm (4 1 ⁄4”)<br />
overall width, holes in plate<br />
are at approx 36mm (1.43”)<br />
centres. Shaft is 5 ⁄16” square<br />
<strong>and</strong> 127mm (5”) long.<br />
Chromed 060.003<br />
£46.00 each | £40.00 ex VAT<br />
CAR BODY PARTS<br />
LOCKABLE BOOT HANDLE<br />
For AC Cobra. H<strong>and</strong>le is<br />
95mm (3 3 ⁄4”) overall width,<br />
holes in plate are at approx<br />
36mm (1.43”) centres. Shaft<br />
is 5 ⁄16” square <strong>and</strong> 127mm<br />
(5”) long. Chromed<br />
060.002<br />
£39.10 each | £34.00 ex VAT<br />
SMALL 'L' DOOR HANDLE<br />
This h<strong>and</strong>le is 76mm (3”) long. Hole<br />
centres in plate are approx 35mm<br />
(1.375”) apart. Shaft is 5 ⁄16” square <strong>and</strong><br />
127mm (5”) long. Chrome plated<br />
060.035<br />
£36.80 each | £32.00 ex VAT<br />
Non-locking 060.037<br />
£36.80 each | £32.00 ex VAT<br />
MG TF DOOR HANDLE<br />
For MG TF. Shaft is 5 ⁄16” square <strong>and</strong><br />
127mm (5”) long. Not h<strong>and</strong>ed.<br />
Complete with gaskets <strong>and</strong> screws.<br />
Chrome plated 060.041<br />
£54.63 per pair | £47.50 ex VAT<br />
CHROMED GRAB HANDLE<br />
4 Screw Type Grab H<strong>and</strong>le. Holes are<br />
at 140mm (5 1 ⁄2”) & 22mm ( 7 ⁄8”) centres.<br />
060.022<br />
£32.20 each | £28.00 ex VAT<br />
LOCKABLE BOOT HANDLE<br />
For Morris Minor. H<strong>and</strong>le<br />
is 139mm (5.5”) overall<br />
width, two studs are at<br />
approx 32mm (1.25”)<br />
centres. Shaft is 5 ⁄16” square<br />
<strong>and</strong> 40mm (1.60”) long.<br />
Chromed 060.005<br />
£32.14 each | £27.95 ex VAT<br />
71
72<br />
CAR BODY PARTS<br />
BOOT HINGES<br />
As fitted to many cars, including<br />
Triumph TR4, Spitfire Mk I, II, III,<br />
Herald, Nash Metropolitain, St<strong>and</strong>ard<br />
8 & 10. 22mm x 125mm. Chromed<br />
060.091<br />
£69.00 per pair | £60.00 ex VAT<br />
ANTI-BURST DOOR<br />
LATCHES<br />
Right h<strong>and</strong> 060.073<br />
£39.10 each | £34.00 ex VAT<br />
Left h<strong>and</strong> 060.072<br />
£39.10 each | £34.00 ex VAT<br />
HINGES<br />
BOOT/BONNET HINGE<br />
As fitted to many cars, including<br />
Lotus Elan, TVR, Hillman Imp,<br />
Reliant etc. Suitable for kit cars.<br />
22mm x 135mm. Chromed 060.090<br />
£34.50 each | £30.00 ex VAT<br />
LATCHES & CATCHES<br />
BUDGET LATCH<br />
Right h<strong>and</strong> 060.015<br />
£9.43 each | £8.20 ex VAT<br />
Left h<strong>and</strong> 060.014<br />
£9.43 each | £8.20 ex VAT<br />
Universal Type 060.013<br />
£5.87 each | £5.10 ex VAT<br />
THROW OVER CATCH<br />
A h<strong>and</strong>ed pair of chrome plated catches. 82mm (31⁄4”) tall<br />
060.110 £45.95 a pair | £39.96 ex VAT<br />
ALIGNMENT PLATE & PIN<br />
For MGB, Rover 2000, Jaguar 'E' Type Series III, but can<br />
be fitted to other cars, including kit cars.<br />
Alignment plate 060.070 £6.33 each | £5.50 ex VAT<br />
Alignment pin 060.071 £5.19 each | £4.50 ex VAT<br />
SLIDING STAY SELF RELEASING<br />
Bonnet or boot stay. Bracket on lower end, 508mm (20”)<br />
extended length. 060.100 £17.02 each | £14.80 ex VAT<br />
These latches take 5 ⁄16” square shaft or key<br />
BOOT STAYS<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
BRIDGE TYPE LATCH<br />
Right h<strong>and</strong> with hooked<br />
latch 060.012<br />
£13.23 each | £11.50 ex VAT<br />
Left h<strong>and</strong> with hooked latch<br />
060.011<br />
£13.23 each | £11.50 ex VAT<br />
TRIUMPH LATCH<br />
Triumph Spitfire boot latch<br />
060.004<br />
£20.70 each | £18.00 ex VAT<br />
ESCUTCHEON<br />
Escutcheon for latches,<br />
chromed, with sprung<br />
cover 060.018<br />
£9.20 each | £8.00 ex VAT<br />
BOOT HINGES<br />
As fitted to classic Mini Saloon.<br />
Supplied with screws, studs <strong>and</strong> nuts.<br />
65mm x 90mm. Chromed 060.093<br />
£40.19 per pair | £34.95 ex VAT<br />
BOOT LATCH<br />
Latch as fitted to the boot of<br />
the MG Midget<br />
Right h<strong>and</strong> 060.017<br />
£13.80 each | £12.00 ex VAT<br />
Left h<strong>and</strong> 060.016<br />
£13.80 each | £12.00 ex VAT<br />
ANTI-BURST DOOR<br />
LATCHES<br />
Striker for anti-burst<br />
Latches 060.074<br />
£9.20 each | £8.00 ex VAT<br />
KEY FOR LATCHES<br />
Can open all 5⁄16” square key<br />
latches.127mm (5”) long.<br />
090.487<br />
£5.64 each | £4.90 ex VAT<br />
SLIDING STAY WITH SAFETY CATCH<br />
Bonnet or boot stay. Brackets on both ends, 457mm (18”)<br />
extended length 060.101 £18.40 each | £16.00 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
HOOD FASTENER<br />
Chrome plated on brass, fitted to top hood rail, to locate on<br />
to 16mm diameter peg on windscreen frame. base 63mm x<br />
13mm, 76mm (3”) overall height<br />
060.120 £21.74 each | £18.90 ex VAT<br />
FLEXIBLE GLAZING<br />
CHANNEL<br />
With steel core & lined with<br />
felt <strong>and</strong> moquette. Takes<br />
glass from 4.7mm to 6.4mm<br />
thick. Sold by the metre<br />
060.160<br />
£8.81 per metre | £7.66 ex VAT<br />
FLOCK SPRAYED CHANNEL<br />
As found on European cars. Fitted<br />
width 13mm. Sold by the metre<br />
060.169<br />
£5.57 per metre | £4.84 ex VAT<br />
SPONGE STRIP<br />
As shown 060.172<br />
£5.69 per metre | £4.95 ex VAT<br />
SEAL ROOF/DOOR<br />
Aston Martin DB4 GT 060.781<br />
£5.80 per metre | £5.04 ex VAT<br />
SUNDRIES<br />
GLAZING CHANNELS<br />
SINGLE RIGID<br />
GLAZING CHANNEL<br />
With steel core <strong>and</strong> lined<br />
with felt <strong>and</strong> moquette.<br />
Takes glass from 4.7 mm to<br />
6.4 mm thick. Sold in 1<br />
metre lengths 060.161<br />
£8.27 each | £7.19 ex VAT<br />
FLOCK SPRAYED CHANNEL<br />
As found on European cars. Fitted<br />
width 17mm. Sold by the metre<br />
060.171<br />
£5.77 per metre | £5.02 ex VAT<br />
SEALS<br />
Sold by the metre<br />
SEAL ROOF/BOOT<br />
Aston Martin DB4 GT 060.782<br />
£13.35 per metre | £11.61 ex VAT<br />
CAR BODY PARTS<br />
GLOVE BOX LOCK<br />
Suits MGB to 1974, but can be used on other cars.<br />
Chromed 060.125 £10.07 each | £8.76 ex VAT<br />
SINGLE RIGID<br />
GLAZING CHANNEL<br />
With steel core <strong>and</strong> flock<br />
spray lined. Will take glass<br />
from 4 mm to 6 mm thick.<br />
Sold in 1 metre lengths<br />
060.164<br />
£16.64 each | £14.47 ex VAT<br />
TOP LEAF SEAL<br />
Grip range 1.5mm to 2.5mm 060.174<br />
£5.31 per metre | £4.62 ex VAT<br />
WING PIPING<br />
SINGLE FLEXIBLE<br />
RUBBER CHANNEL<br />
Sold by the metre 060.165<br />
£5.91 per metre | £5.14 ex VAT<br />
DOUBLE FLEXIBLE GLAZING<br />
CHANNEL<br />
With steel core <strong>and</strong> lined with felt <strong>and</strong><br />
moquette. Takes glass from 4.7mm<br />
thick 060.162<br />
£8.76 per metre | £7.62 ex VAT<br />
TOP LEAF SEAL<br />
Grip range 1.5mm to 3.5mm 060.175<br />
£6.96 per metre | £6.05 ex VAT<br />
CLIP ON SPONGE SEAL<br />
As shown 060.780<br />
£4.54 per metre | £3.95ex VAT<br />
Vinyl coated fabric wrapped around a 3mm bead ( 1 ⁄8”). 32mm tail<br />
060.532 £2.88 per metre | £2.50 ex VAT<br />
Vinyl coated fabric wrapped around a 4.75mm bead ( 3 ⁄16”). 30mm tail<br />
060.533 £2.88 per metre | £2.50 ex VAT<br />
Vinyl coated fabric wrapped around a 6mm bead ( 1 ⁄4”). 27mm tail<br />
060.534 £2.88 per metre | £2.50 ex VAT<br />
73
74<br />
CAR BODY PARTS<br />
RIGID WAIST SEAL<br />
FOR WINDOWS<br />
Black with flock sprayed lip.<br />
Sold in 1 metre lengths<br />
060.166<br />
£7.72 each | £6.71 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1mm to 3mm.<br />
Goes 10.7mm over flange<br />
060.206<br />
£5.06 metre | £4.40 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1mm to 3mm.<br />
Goes 13.3mm over flange<br />
060.210<br />
£5.52 metre | £4.80 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.770<br />
£5.93 metre | £5.16 ex VAT<br />
WHITE ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.774<br />
£1.73 metre | £1.50 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
XK Jaguar adhesive base<br />
boot seal. 060.778<br />
£6.07 metre | £5.28 ex VAT<br />
EDGE TRIMS & WAIST SEALS<br />
RIGID WAIST SEAL<br />
FOR WINDOWS<br />
Black with flock sprayed lip.<br />
Sold in 1 metre lengths<br />
060.168<br />
£8.58 each | £7.46 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1mm to 3mm.<br />
Goes 12.5mm over flange<br />
060.207<br />
£5.06 metre | £4.40 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1.5mm to 3mm.<br />
Goes 12mm over flange<br />
060.211<br />
£3.39 metre | £2.95 ex VAT<br />
ADHESIVE SEALS<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.771<br />
£2.54 metre | £2.21 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.775<br />
£1.27 metre | £1.10 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base 060.779<br />
£5.53 metre | £4.81 ex VAT<br />
Sold by the metre<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
BLACK PVC EDGE TRIM<br />
Grip range 0.7mm to 2.5mm.<br />
Goes 12mm over flange<br />
060.204<br />
£3.19 metre | £2.77 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 2.5mm to 4mm.<br />
Goes 12.5mm over flange<br />
060.208<br />
£4.70 metre | £4.09 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1mm to 2mm.<br />
Goes 8mm over flange<br />
060.212<br />
£3.39 metre | £2.95 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.772<br />
£3.27 metre | £2.84 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.776<br />
£1.61 metre | £1.40 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 0.5mm to 1.5mm.<br />
Goes 8mm over flange<br />
060.205<br />
£3.57 metre | £3.10 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 2mm to 4mm.<br />
Goes 13mm over flange<br />
060.209<br />
£5.06 metre | £4.40 ex VAT<br />
BLACK PVC EDGE TRIM<br />
Grip range 1mm to 3mm.<br />
Goes 12.5mm over flange<br />
060.213<br />
£5.57 metre | £4.84 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.773<br />
£2.98 metre | £2.59 ex VAT<br />
BLACK ADHESIVE<br />
SPONGE SEAL<br />
With adhesive backing at<br />
base. 060.777<br />
£2.76 metre | £2.40 ex VAT<br />
ADHESIVE POLYETHYLENE STRIP<br />
For sealing where proof against dust, water/moisture is<br />
needed. Resistant to oil, weathering, most acids & alkalis.<br />
one side is adhesive <strong>and</strong> sticks to any surface.<br />
25 x 4mm 060.760 £1.83 per metre | £1.59 ex VAT<br />
25 x 6mm 060.761 £1.83 per metre | £1.59 ex VAT<br />
25 x 10mm 060.762 £3.05 per metre | £2.65 ex VAT<br />
25 x 12mm 060.763 £3.05 per metre | £2.65 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
TOP TUBE SEAL<br />
Grip range 1mm to<br />
2mm 060.176<br />
£5.97 per metre<br />
£5.19 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 1.5mm to<br />
2.5mm 060.182<br />
£7.59 per metre<br />
£6.60 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 0.8mm to<br />
2.5mm 060.187<br />
£4.35 per metre<br />
£3.78 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.193<br />
£8.60 per metre<br />
£7.48 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.199<br />
£5.82 per metre<br />
£5.06 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 1mm to<br />
3.5mm 060.177<br />
£6.00 per metre<br />
£5.22 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 1mm to<br />
2mm 060.183<br />
£7.79 per metre<br />
£6.77 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.188<br />
£7.89 per metre<br />
£6.86 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.194<br />
£7.84 per metre<br />
£6.82 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 3.5mm to<br />
5mm 060.200<br />
£5.95 per metre<br />
£5.17 ex VAT<br />
‘TUBE & LEAF’ SEALS<br />
Sold by the metre<br />
TOP TUBE SEAL<br />
Grip range 0.5mm to<br />
1.5mm 060.178<br />
£7.73 per metre<br />
£6.72 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 0.5mm to<br />
1.5mm 060.184<br />
£7.13 per metre<br />
£6.20 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 1.5mm to<br />
2.5mm 060.189<br />
£7.34 per metre<br />
£6.38 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.195<br />
£9.11 per metre<br />
£7.92 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 4mm to<br />
5mm 060.201<br />
£5.95 per metre<br />
£5.17 ex VAT<br />
CAR BODY PARTS<br />
TOP TUBE SEAL<br />
Grip range 0.5mm to<br />
1.5mm 060.179<br />
£8.17 per metre<br />
£7.10 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.185<br />
£9.11 per metre<br />
£7.92 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 0.5mm to<br />
1.5mm 060.190<br />
£7.34 per metre<br />
£6.38 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 1.5mm to<br />
3mm 060.197<br />
£9.61 per metre<br />
£8.36 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 1mm to<br />
3mm 060.202<br />
£4.81 per metre<br />
£4.18 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 1.5mm to<br />
2.5mm 060.181<br />
£5.31 per metre<br />
£4.62 ex VAT<br />
TOP TUBE SEAL<br />
Grip range 2mm to<br />
3mm. Boot Seal on<br />
Aston Martins<br />
060.186<br />
£8.20 per metre<br />
£7.13ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 1.5mm to<br />
2.5mm 060.192<br />
£8.22 per metre<br />
£7.15 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 2mm to<br />
3mm 060.198<br />
£7.82 per metre<br />
£6.80 ex VAT<br />
SIDE TUBE SEAL<br />
Grip range 0.8mm to<br />
2.5mm 060.203<br />
£8.35 per metre<br />
£7.26 ex VAT<br />
75
76<br />
CAR BODY PARTS<br />
SOCKETS<br />
5.6mm Prongs 091.100<br />
£1.38 each | £1.20 ex VAT<br />
7.1mm Prongs 091.101<br />
£2.07 each | £1.80 ex VAT<br />
MACHINE SCREW<br />
STUDS -14mm TALL<br />
Single Type suitable for 1<br />
Socket 091.105<br />
£1.52 each | £1.32 ex VAT<br />
BUTTON<br />
Fits to fabric using<br />
either 091.141 or<br />
091.142<br />
091.140<br />
£2.45 each<br />
£2.13 ex VAT<br />
MACHINE<br />
SCREW STUD<br />
10mm long thread<br />
091.145<br />
£1.38 each<br />
£1.20 ex VAT<br />
SIDE TUBE SEAL<br />
2 Screw Stud with<br />
Shoulder<br />
091.150<br />
£1.73 each<br />
£1.50 ex VAT<br />
CANVAS TO<br />
CANVAS STUD<br />
Short Stud<br />
091.151<br />
£1.73 each<br />
£1.50 ex VAT<br />
LIFT THE DOT FASTENERS<br />
CLINCH PLATE<br />
For use with Sockets<br />
091.102<br />
£0.61 each | £0.53 ex VAT<br />
2 SCREW STUD<br />
SINGLE TYPE<br />
13mm tall. Suitable for 1<br />
Socket. 091.107<br />
£2.42 each | £2.10 ex VAT<br />
STANDARD<br />
THREAD<br />
LOCKING NUT<br />
For 091.140.<br />
091.141<br />
£1.09 each<br />
£0.95 ex VAT<br />
MACHINE<br />
SCREW STUD<br />
25mm long thread<br />
091.146<br />
£1.50 each<br />
£1.30 ex VAT<br />
EXTENDED<br />
THREAD<br />
LOCKING NUT<br />
For 091.140.<br />
091.142<br />
£1.38 each<br />
£1.20 ex VAT<br />
MACHINE SCREW<br />
STUD WITH<br />
SHOULDER<br />
xxmm long thread<br />
091.147<br />
£2.65 each<br />
£2.30 ex VAT<br />
CANVAS TO<br />
CANVAS STUD<br />
Long Stud<br />
091.152<br />
£2.01 each<br />
£1.75 ex VAT<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
WOOD SCREW STUDS -<br />
14mm TALL<br />
Single Type suitable for 1<br />
Socket 091.103<br />
£2.14 each | £1.86 ex VAT<br />
PRONGED STUD<br />
13mm tall. Single type suitable<br />
for 1 Socket. 091.109<br />
£0.72 each | £0.63 ex VAT<br />
TENAX FASTENERS<br />
WOOD SCREW<br />
STUD<br />
Wood Screw Stud<br />
without Shoulder<br />
091.143<br />
£1.15 each<br />
£1.00 ex VAT<br />
SELF TAPPING<br />
STUD<br />
For metal panel or<br />
bodywork<br />
091.148<br />
£1.73 each<br />
£1.50 ex VAT<br />
CANVAS TO<br />
CANVAS STUD<br />
Locking Collar<br />
091.153<br />
£0.69 each<br />
£0.60 ex VAT<br />
WOOD SCREW STUDS -<br />
20mm TALL<br />
Double Type suitable for 2<br />
Sockets 091.104<br />
£3.21 each | £2.79 ex VAT<br />
PRONGED STUD<br />
WASHER<br />
Washer for use with<br />
Pronged Stud 091.110<br />
£0.24 each | £0.21 ex VAT<br />
WOOD SCREW<br />
STUD<br />
Wood Screw Stud<br />
with Shoulder<br />
091.144<br />
£1.38 each<br />
£1.20 ex VAT<br />
TWO SCREW<br />
STUD<br />
2 Screw Stud without<br />
Shoulder<br />
091.149<br />
£1.73 each<br />
£1.50 ex VAT<br />
LOCKING KEY<br />
Easy tightening of<br />
Tenax fittings<br />
091.154<br />
£0.92 each<br />
£0.80 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk<br />
PRONGED EYELET<br />
This eyelet is fitted to<br />
the fabric with Clinch<br />
Plate 091.113.<br />
091.112<br />
£0.69 each<br />
£0.60 ex VAT<br />
CLINCH PLATE<br />
For use with Eyelet<br />
091.117<br />
091.118<br />
£0.37 each<br />
£0.32 ex VAT<br />
BUTTON<br />
For use with Socket<br />
091.121 either side<br />
of the fabric.<br />
091.120<br />
£0.35 each<br />
£0.30 ex VAT<br />
SHORT EYELET<br />
Short eyelet, 6mm tall<br />
091.125<br />
£0.46 each<br />
£0.40 ex VAT<br />
CLINCH PLATE<br />
For use with Pronged<br />
Eyelet 091.112<br />
091.113<br />
£0.69 each<br />
£0.60 ex VAT<br />
PRONGED RING<br />
For pushing through<br />
the carpet from the<br />
top. 22mm dia. 8mm<br />
prongs 091.130<br />
£0.92 each<br />
0.80 ex VAT<br />
SOCKET<br />
For use with Button<br />
091.120 either side<br />
of the fabric<br />
091.121<br />
£0.35 each<br />
£0.30 ex VAT<br />
LONG EYELET<br />
Long eyelet. 9mm tall<br />
091.126<br />
£0.55 each<br />
£0.48 ex VAT<br />
TURNBUCKLES<br />
SINGLE 2 SCREW<br />
TURNBUCKLE<br />
Suitable for 1 eyelet.<br />
17mm tall.<br />
091.115<br />
£1.15 each<br />
£1.00 ex VAT<br />
STUD WITH<br />
WOOD SCREW<br />
Can also be used<br />
with a screw & nut or<br />
self tap 091.122<br />
£1.09 each<br />
£0.95 ex VAT<br />
CAR BODY PARTS<br />
DOUBLE 2 SCREW<br />
TURNBUCKLE<br />
Suitable for 2 eyelet.<br />
21mm tall.<br />
091.116<br />
£1.44 each<br />
£1.25 ex VAT<br />
CARPET FASTENERS<br />
CIRCULAR<br />
SOCKET<br />
Use with 091.130.<br />
Goes under the<br />
carpet 091.132<br />
£1.50 each<br />
£1.30 ex VAT<br />
TRIANGULAR<br />
SOCKET<br />
Use with 091.130.<br />
Goes under the<br />
carpet 091.133<br />
£0.92 each<br />
£0.80 ex VAT<br />
STUD<br />
For clipping 2 pieces<br />
of fabric together.<br />
091.124<br />
£0.46 each<br />
£0.40 ex VAT<br />
PRONGED TYPE<br />
TURNBUCKLE<br />
Suitable for 1 Socket.<br />
21mm tall. Use with<br />
Clinch Plate 091.118<br />
091.117<br />
£1.20 each<br />
£1.04 ex VAT<br />
STUD<br />
Stud for screwing to<br />
floor or panel<br />
091.134<br />
£0.46 each<br />
£0.40 ex VAT<br />
DZUS FASTENERS<br />
Countersunk Dzus Fasteners are designed to secure one panel to another quickly, requiring only a quarter turn to lock or<br />
free them. They fit almost flush with the outer panel <strong>and</strong> only require a screwdriver or coin to open. They are sized in<br />
accordance with the combined thickness of the two panels. The spring is common to all sizes. Fitting will require 1 ⁄8" rivets<br />
SPRING<br />
090.418<br />
£1.73 each<br />
£1.50 ex VAT<br />
4mm FASTENER<br />
090.410<br />
£6.33 each<br />
£5.50 ex VAT<br />
5mm FASTENER<br />
090.411<br />
£6.33 each<br />
£5.50 ex VAT<br />
DURABLE DOT FASTENERS<br />
6mm FASTENER<br />
090.412<br />
£6.33 each<br />
£5.50 ex VAT<br />
7mm FASTENER<br />
090.413<br />
£6.33 each<br />
£5.50 ex VAT<br />
STUD FOR POP<br />
RIVET<br />
For clipping 2 pieces<br />
of fabric together.<br />
091.123<br />
£0.52 each<br />
£0.45 ex VAT<br />
HAND TOOL<br />
Tool for Durable Dot Fasteners. 091.091 £18.69 each | £16.25 ex VAT<br />
77
78<br />
HEAT CONTROL<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
HEAT CONTROL<br />
Used on the hot parts of the engine these heat control products will reduce underbonnet temperatures <strong>and</strong> protect you from<br />
burns. They can also be used to protect starter motors <strong>and</strong> similar equipment from excess heat<br />
EXHAUST INSULATING<br />
WRAP - BROWN<br />
For the exhaust downpipes<br />
<strong>and</strong> exhaust system.<br />
Width 25mm (1”), 15m<br />
(50ft) roll 091.440<br />
£41.40 each | £36.00 ex VAT<br />
Width 50mm (2”), 15m<br />
(50ft) roll 091.441<br />
£64.40 each | £56.00 ex VAT<br />
EXHAUST HEADER KITS<br />
Exhaust manifold blanket/<br />
flexible exhaust heat shield<br />
to cover upper header<br />
manifolds on 4 & straight 6<br />
engines. Includes all<br />
necessary fasteners.<br />
091.456<br />
£107.84 each | £93.77 ex VAT<br />
Exhaust Manifold Blanket<br />
Kit for V6 & V8 engines.<br />
091.457<br />
£126.11 each | £109.66 ex VAT<br />
EXHAUST INSULATING<br />
WRAP - BLACK<br />
For the exhaust downpipes<br />
<strong>and</strong> exhaust system.<br />
Width 25mm (1”), 15m<br />
(50ft) roll 092.450<br />
£41.40 each | £36.00 ex VAT<br />
Width 50mm (2”), 15m<br />
(50ft) roll 092.451<br />
£64.40 each | £56.00 ex VAT<br />
Picture coming<br />
soon<br />
TURBO INSULATING KIT<br />
Keeps the turbo cool <strong>and</strong><br />
virtually eliminates turbolag.<br />
Radiant heat is also<br />
contained, making for a<br />
cooler under bonnet<br />
environment.<br />
For 4 cylinder engines<br />
091.418<br />
£127.21 each | £110.62 ex VAT<br />
For 8 cylinder engines<br />
091.419<br />
£148.64 each | £129.25 ex VAT<br />
COOL TUBE<br />
Flexible tubing to protect wiring, fuel lines, brake lines <strong>and</strong><br />
other areas from extreme heat. Manufactured from<br />
convoluted Nylon 6 tubing - no plastic - covered with<br />
aluminised fibreglass fabric. It is slit lengthwise for ease of<br />
installation, which eliminates the need to disconnect wires<br />
or lines. Sizes are dia. measured internally.<br />
13mm ( 1 ⁄2”) <strong>and</strong> 914mm (3ft) long<br />
092.416 £24.58 each | £21.37 ex VAT<br />
13mm ( 1 ⁄2”) <strong>and</strong> 4.5 metres (15ft) long<br />
092.417 £91.43 each | £79.50 ex VAT<br />
19mm ( 3 ⁄4”) <strong>and</strong> 914mm (3ft) long<br />
092.414 £37.86 each | £32.92 ex VAT<br />
19mm ( 3 ⁄4”) <strong>and</strong> 4.5 metres (15ft) long<br />
092.415 £110.07 each | £95.71 ex VAT<br />
THERMO SHIELD TAPE<br />
This is an aluminised<br />
adhesive backed tape for<br />
wrapping the hoses <strong>and</strong><br />
wires. 38mm (1 1 ⁄2”) wide x<br />
4.5 metres (15ft) long.<br />
091.455<br />
£25.76 each | £22.40 ex VAT<br />
EXHAUST SILENCER<br />
HEAT SHIELD<br />
Made from woven silica with<br />
a flexible mylar finish. For<br />
installation between the<br />
silencer or catalytic<br />
converter <strong>and</strong> the floor to<br />
reflect 90% of the heat away<br />
from the floor. Includes<br />
fasteners. Size 1016mm x<br />
610mm (40”x 24”) 091.435<br />
£78.86 each | £68.57 ex VAT<br />
HT SILICONE COATING<br />
An aerosol for spraying<br />
onto pipes or wrapped<br />
pipes. Resists extreme<br />
temperatures, weathering,<br />
chemicals, solvents, acid &<br />
salt. When sprayed direct<br />
on to pipes it helps maintain<br />
the integrity of the surface.<br />
Black 092.404<br />
£10.93 each | £9.50 ex VAT<br />
Aluminium 092.405<br />
£10.93 each | £9.50 ex VAT<br />
LOCKING TIES<br />
Pack of eight. They have a<br />
locking ball for increased<br />
holding power. Suitable for<br />
securing wrapped exhausts<br />
up to 51mm (2”) dia.<br />
203mm long 092.402<br />
£19.49 each | £16.95 ex VAT<br />
356mm long 092.403<br />
£12.34 each | £10.73 ex VAT<br />
ALUMINISED HEAT<br />
BARRIERS<br />
Withst<strong>and</strong>s 540˚C on one<br />
side & radiant temperatures<br />
of up to 1000˚C on the<br />
aluminised side.<br />
Size 508mm x 457mm<br />
(20”x18”) 091.445<br />
£30.38 each | £26.42 ex VAT<br />
Size 914mm x 508mm<br />
(36”x20”) 091.446<br />
£60.74 each | £52.82 ex VAT<br />
Size 1016mm x 914mm<br />
(40”x36”) 091.447<br />
£111.54 each | £96.99 ex VAT<br />
COOL TAPE<br />
For wrapping hoses <strong>and</strong><br />
wires that are close to a<br />
heat source <strong>and</strong> covering<br />
openings in firewalls <strong>and</strong><br />
footboards. Has a smooth<br />
finish & adhesive backing.<br />
35mm (1 3 ⁄8") wide x 4.5<br />
metres (15ft) long 092.411<br />
£21.53 each | £18.72 ex VAT<br />
35mm (1 3 ⁄8") wide x 9.1<br />
metres (30ft) long 092.412<br />
£38.86 each | £33.79 ex VAT<br />
51mm (2") wide x 18.3<br />
metres (60ft) long 092.413<br />
£80.20 each | £69.74 ex VAT
Website open 24hrs everey day<br />
www.holden.co.uk HEAT CONTROL<br />
STAINLESS STEEL<br />
STRAP KIT<br />
Contains 20ft (over 6m) of<br />
strap & 20 clips 091.444<br />
£39.10 each | £34.00 ex VAT<br />
INSULATING MAT<br />
A combination of heat <strong>and</strong><br />
sound technologies. Use<br />
for floor, bulkhead, doors,<br />
under bonnet <strong>and</strong> above<br />
transmission housings.<br />
Includes push-in fasteners<br />
Size 1219mm x 711mm<br />
(48”x 28”) 091.416<br />
£44.62 each | £38.80 ex VAT<br />
Size 1219mm x 1219mm<br />
(48”x 48”) 091.417<br />
£90.39 each | £78.60 ex VAT<br />
ALUMINISED INSULATED SLEEVES<br />
Slip them over hoses or wires to give<br />
protection from heat radiated from exhaust<br />
downpipes or engine block <strong>and</strong> other hot<br />
spots around the car. Prices are for a<br />
914mm (3 ft) length<br />
Size 6mm – 13mm ( 1 ⁄4”– 1 ⁄2”)<br />
091.448 £17.43 each | £15.16 ex VAT<br />
Size 5 ⁄8”–1”,16mm – 25<br />
091.449 £23.49 each | £20.43 ex VAT<br />
Size 1 1 ⁄8”–1 1 ⁄2”, 28mm – 38<br />
091.450 £28.58 each | £24.85 ex VAT<br />
Size 1 5 ⁄8”–2”, 41mm – 51<br />
091.451 £32.41 each | £28.18 ex VAT<br />
Size 2 1 ⁄8”–2 1 ⁄2”, 54 – 63<br />
091.452 £38.54 each | £33.51 ex VAT<br />
STARTER HEAT SHIELD<br />
Made to eliminate starter<br />
problems caused by close<br />
proximity to the exhaust.<br />
Easy to strap on. Size<br />
178mm x 559mm (7” x 22”)<br />
091.438<br />
£41.09 each | £35.73 ex VAT<br />
FIREWALL & FLOOR<br />
INSULATION<br />
The front has an aluminium<br />
shield to reflect heat, cold &<br />
moisture. Behind this the<br />
insulation is suitable for<br />
temperatures from -40°F to<br />
700°F making this material<br />
suitable for firewalls, floors,<br />
inside door panels <strong>and</strong><br />
under carpeting. 1220mm x<br />
1828mm (48"x72").<br />
Supplied as a roll 091.458<br />
£55.20 each | £48.00 ex VAT<br />
HEAT CONTROL<br />
HEAT SHROUD<br />
Designed to protect wires<br />
<strong>and</strong> lines from heat. For use<br />
on items 19 to 32mm ( 3 ⁄4 to<br />
1 1 ⁄4”) diameter. Wrap it<br />
around the wires or lines<br />
<strong>and</strong> it fastens to itself with<br />
the velcro provided. Length<br />
914mm (36”). 092.410<br />
£40.78 each | £35.46 ex VAT<br />
VERSA SHIELD<br />
The universal heat shield,<br />
originally designed to<br />
protect starters from heat, it<br />
can also be used to protect<br />
carburettors, fuel pumps,<br />
electrical boxes <strong>and</strong><br />
instruments. Can easily be<br />
cut to shape <strong>and</strong> attaches<br />
to itself using the velcro<br />
provided. Size 178mm x<br />
610mm (7”x24”) 092.407<br />
£38.32 each | £33.32 ex VAT<br />
COMPETITION FLOOR INSULATING MAT<br />
Has a highly textured aluminium composite<br />
surface on one side, a high temp silica felt<br />
centre & a durable mylar composite facing.<br />
Size 203mm x 305mm, (8”x12”)<br />
091.439 £82.98 | £72.16 ex VAT<br />
Size 254mm x 457mm, (10”x18”)<br />
091.486 £122.41 | £106.44 ex VAT<br />
Size 457mm x 457mm, (18”x18”)<br />
091.487 £139.23 | £121.07 ex VAT<br />
Size 457mm x 610mm, (18”x24”)<br />
091.488 £154.07 | £133.97 ex VAT<br />
Size 610mm x 610mm, (24”x24”)<br />
091.489 £163.99 | £142.60 ex VAT<br />
Size 610mm x 914mm, (24”x36”)<br />
091.415 £171.59 | £149.21 ex VAT<br />
PROTECT-A-BOOT<br />
Designed to protect spark<br />
plug boots <strong>and</strong> wires from<br />
extreme temperatures created<br />
by exhaust manifolds<br />
Pack of 2 092.418<br />
£19.99 each | £17.38 ex VAT<br />
Pack of 8 092.419<br />
£75.36 each | £65.53 ex VAT<br />
EXHAUST MANIFOLD<br />
JACKET KITS<br />
Wraps around the<br />
individual primary headers<br />
of exhaust systems. Can be<br />
fitted to all headers up to 2"<br />
(50mm) dia <strong>and</strong> consists of<br />
enough material to insulate<br />
up to 22" (559mm) of each<br />
primary header. Complete<br />
with fasteners.<br />
For 4 <strong>and</strong> straight 6 cylinder<br />
engines. 091.436<br />
£96.50 each | £83.91 ex VAT<br />
For V6 & V8 engines.<br />
091.437<br />
£126.11 each | £109.66 ex VAT<br />
ACID ABSORBING<br />
BATTERY SHIELD<br />
3 layer material. Insulates<br />
battery from heat, absorbs<br />
<strong>and</strong> neutralizes acid. Outer<br />
layer is aluminised for<br />
protection <strong>and</strong> to reflect<br />
heat. Trim <strong>and</strong> fit in<br />
accordance with the<br />
instructions provided<br />
091.453<br />
£41.40each | £36.00 ex VAT<br />
79
ABOUT US:<br />
<strong>Holden</strong> <strong>Vintage</strong> & <strong>Classic</strong> mail order company was established in November 1988. Now<br />
located in Bromyard in Herefordshire, Engl<strong>and</strong>, the company has developed in parallel<br />
with the worldwide interest in period motoring.<br />
The company started as Lucas electrical specialists for which we are renowned. Luckily<br />
some original tooling is still available, <strong>and</strong> in other instances we have commissioned new<br />
tooling to allow manufacture of otherwise unobtainable parts.<br />
The product range has now been widened to cover many other items including<br />
clothing, accessories, books, DVDs <strong>and</strong> tools for the garage or workshop.<br />
We also have a shop at Bromyard, so if you live nearby, or are in the area<br />
please call in between<br />
9.00am <strong>and</strong> 5.00pm Monday to Friday,<br />
9.30am <strong>and</strong> 12.00 noon Saturday.<br />
HOW TO ORDER:<br />
By phone:<br />
<strong>+44</strong> (0) 1885 488 488<br />
8.30am - 5.00pm, Mon - Fri<br />
By fax:<br />
<strong>+44</strong> (0) 1885 488 889<br />
By website:<br />
www.holden.co.uk<br />
By E-mail:<br />
sales@holden.co.uk<br />
By post:<br />
<strong>Holden</strong> <strong>Vintage</strong> & <strong>Classic</strong>,<br />
Linton Trading Estate,<br />
Bromyard,<br />
Herefordshire,<br />
HR7 4QT,<br />
Engl<strong>and</strong><br />
• 9000 + products<br />
• Br<strong>and</strong> sections<br />
• User friendly<br />
• Multi currency<br />
• Inclusive<br />
delivery<br />
prices<br />
Order lines open 8.30am - 5.00pm Mon - Fri<br />
<strong>+44</strong> (0) 1885 488 488<br />
www.holden.co.uk<br />
Lucas electrical specialists