Theben: Home & Building Control Systems KNX
Theben: Home & Building Control Systems KNX
Theben: Home & Building Control Systems KNX
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
compact passage <strong>KNX</strong><br />
<strong>KNX</strong><br />
Presence detectors SYSTEMS<br />
Presence detectors compact passage <strong>KNX</strong>, compact passimo <strong>KNX</strong><br />
compact passage <strong>KNX</strong> compact passimo <strong>KNX</strong><br />
Description<br />
Common functions<br />
■ Presence detector (PIR)<br />
■ Mixed light measurement<br />
■ Two outputs light for controlling two<br />
lighting groups<br />
■ Switching or constant light control<br />
■ Choice of fully or semi automatic operation<br />
■ Presence output for HVAC control with<br />
switch-on delay and switch-off delay<br />
■ Room monitoring with selective movement<br />
detection<br />
■ Integrated bus coupling<br />
■ QuickSet plus service remote control<br />
(optional)<br />
■ Clic user remote control (optional)<br />
Product selection<br />
Technical data<br />
40<br />
■ In the „switching“ operation mode,<br />
lighting switches on with darkness and<br />
presence and off with suffi cient light or<br />
when nobody is present. In the „constant<br />
light control“ operation mode the sensor<br />
controls the artifi cial light daylight-dependent<br />
on a constant lighting level.<br />
■ The self-learning switch-off delay time<br />
adjusts to occupants‘ behaviour<br />
■ Fully or semi-automatic: In „Fully automatic“<br />
mode, the lighting switches on and off<br />
automatically according to presence and<br />
light In „Semi-automatic“ mode, it must be<br />
switched on manually and it switches off<br />
automatically<br />
■ The monitoring output works with reduced<br />
sensitivity and indicates the presence of<br />
persons with a high level of accuracy<br />
httpAdditional technical data at:<br />
www.theben.de/product/ Article number<br />
■ The brightness output makes the light<br />
information available for visualisation<br />
purposes<br />
■ Master or slave operating mode is selected<br />
via confi guration<br />
■ Test operation mode checks the detection<br />
range and confi guration<br />
■ A maximum of 10 detectors can be switched<br />
at the same time<br />
compact passage <strong>KNX</strong><br />
■ Square detection range for corridors<br />
compact passimo <strong>KNX</strong><br />
■ Rectangular detection area for storage areas<br />
with clear demarcation vertically below<br />
the presence detector<br />
Installation type Colour Type Article number<br />
Ceiling mounting<br />
Operating voltage <strong>KNX</strong> Bus voltage<br />
Recommended installation height 2–3 m<br />
Brightness measuring range 10–1500 lx<br />
Light switch-off delay 30 s–20 min<br />
Light stand-by time 0 s–60 min<br />
Pure white (similar to RAL 9010) compact passage <strong>KNX</strong> 2019290<br />
Black (similar to RAL 9005) compact passage <strong>KNX</strong> BK 2019803<br />
Silver (similar to RAL 9006) compact passage <strong>KNX</strong> SR 2019804<br />
Pure white (similar to RAL 9010) compact passimo <strong>KNX</strong> WH 2019280<br />
Black (similar to RAL 9005) compact passimo <strong>KNX</strong> BK 2019809<br />
Silver (similar to RAL 9006) compact passimo <strong>KNX</strong> SR 2019810<br />
compact passage <strong>KNX</strong>, compact passimo <strong>KNX</strong><br />
Presence switch-off delay 30 s–120 min<br />
Presence switch on delay 0 s-30 min<br />
Ambient temperature +0 °C…+50 °C<br />
Protection rating IP 40