Untitled - Clpdigital.org

5: rr>
RgVIEW OF IRON A N D STEEL
LITERATURE FOR 1964
A CLASSIFIED LIST OF THF, MORF.
IMPORTANT BOOKS. SERIALS AND
TRADE PUBLICATIONS DURING THE
YEAR; WITH A FEW OF EARLIER
DATE NOT PREVIOUSLY ANNOUNCED
By ESTHER CHESIRE
Sonne and Technolotp' Department. Camwjie Library of Pittsburgh
Reprinted from
"The Blast Furnace and Steei Plant"
August-December 1965
CARNEGIE LIBRARY OF PITTSBURGH
1965
^
v \
^a&fyoz^v.A.u of Pittsburgh

CARNEGIE LIBRARY
OF PITTSBURGH
A free public library donated by
Andrew Carnegie and maintained by
the City of Pittsburgh.
A supplemental appropriation by the
County of Allegheny provides for free
service to County residents.

Review of Iron and Steel Literature for 1964
This Bibliography, the forty-eighth annual Review
of Iron and Steel Literature compiled for the Blast Furnace
and Steel Plant, attempts to list books and pamphlets
published during 1964, with some of earlier date not
included in previous issues.
When possible, the compiler has examined the publications
listed. In some cases they were not accessible,
and the only information regarding them was in technical
journals and publishers* announcements; unfortunately
this information is not always accurate or
complete for bibliographic purposes. Prices are difficult
to verify and may vary from one source to another
so that those listed may be inaccurate in some cases.
The Science and Technology Department, Carnegie
Library of Pittsburgh, receives the PB reports issued
by the Clearinghouse for Federal Scientific and Technical
Information (CFSTI), the non-secret AD reports
from the Defense Documentation Center (DDC). those
reports issued by the Atomic Energy Commission
(AEC) and the National Aeronautics and Space Administration
(NASA), and many others from various
government agencies. Complete translations and abstracts
of articles appearing in foreign language journals
are often included.
The Science and Technology Department is a partial
depository for atomic energy reports from Canada,
Great Britain, and Denmark. It also receives some from
Germany, Israel, Italy, Japan, the Netherlands, Spain,
Sweden, and Switzerland.
The Department provides photocopies, accessibility

to reports and journals, and reference assistance in
locating material. Comprehensive lists of books and
journal articles may be found and literature searches
conducted by means of the abstracts, indexes and bibliographies
available in the Department.
This list is concerned only with separately published
books and pamphlets. It is highly selective and makes
no attempt to be all-inclusive.
Much of the important literature in the field appears
in current periodicals and journals which may be approached
through guides such as: the Applied Science
and Technology Index, British Technology Index.
Chemical Abstracts, Engineering Index, International
Aerospace Abstracts, Journal of the Iron and Steel Institute,
Review of Metal Literature, and other abstracting
and indexing services.
Comprehensive indexes of United States government
publications currently available for reference are the
Monthly Catalog of L\ S. Government Publications,
Scientific and Technical Aerospace Reports, Nucleai
Science Abstracts, and the U. S. Government Research
and Development Reports.
The compilation of this bibliography was undertaken
as a project by the Science and Technology Department
under the supervision of Miss Esther Chesirf
with the cooperation and assistance of other stafl
members.
Daniel R. Pfoutz, Head
Science and Technology Department
Carnegie Library of Pittsburgh

Page
General 7
Iron Ores 7
Contents
Economics. Education. History. Statistics, Directories 7
Metallurgy. Refractories. Testing, Working 14
Design and Construction 30
Automation and Computers 32
Codes—Standards 33
Corrosion—Protective Coatings 36
Foundry 57
United States Government Publications ~>9

General
IRON ORES
Barnes, V, E. and Schofield, D. A. Potential lowgrade
iron ore and hydraulic-fracturing sand in Cambrian
sandstones. Northwestern Llano region, Texas.
58p. 1964. University of Texas, Austin. (Bur. of Economic
Geology Dept. of Investigations, no. 53.)
Gross, G. A. Iron deposits near Ungava Bay, Quebec,
x, 4Sp. 1962. Canada Dept. of Mines and Tech.
Surveys, Ottawa, Canada. SI. (Canada Geological
Survey, Bulletin, S2.)
Iron and Steel Institute. Ore mining and materials
handling. S7p. 1963. The Institute, London. 50s. (Special
report, 82.)
Kern, Marshall K. Investigation of Mississippi iron
ores. 77p. 1963. Miss. Geol.. Econ. and Top Survey,
Jackson, Miss. (Bulletin 101.)
Martins, Joao Antonio. Iron ores in Angola. 5Sp.
1962. Junta de Desenvolvimcnto Industrial, Fundo de
Formento de Producao's Exportacao, Luanda.
Pliilipsbom, Hcllmut von. Erzkunde, x, 247p. 1964.
Enke. Stuttgart. 34DM.
Ore Information.
ECONOMICS. EDUCATION, HISTORY. STATISTICS,
DIRECTORIES
American Iron and Steel Institute. Foreign Trade
Trends — Iron and Steel. 1963 ed. SSp. 1963. The
Instiute, New York. $.50.
Boesch, II. and Schib. K., Ed. Beitrage zur Geschichtc
der Schweizerischen Eisengiessereien. 20Sp.
1960. Fischer, Schafihausen.
Contributions to the history of the Swiss iron foundry industry.
7

British Iron and Steel Federation. Steel; leave well
alone. 30p. 1964. The Federation, London. Gratis.
British Iron and Steel Research Association, and
Iron and Steel Institute. Joint Conference on HigA-
Alloy Steels. 1964, Scarborough, Metallurgical development
in high-alloy steel. (9) 262p. 1964. The
Institute, London. 65/-.
Broudc, Henry Walter. Steel Decisions and the National
Economy. 332p. 1963. The Yale Univ. Pr., $7.50.
(Yale studies in economics, 16).
Canada Department of Mines t- Technical Surveys.
Mineral Resources Division. Ottawa.
No. 65: The Steel Industry of the Prairie Provinces,
by T. H. Janes and R. B. Elver, 36p. 1963. $.75.
No. 66: Technical and Economical Factors in Choice
of Steel Plant Location, by R. B. Elver and Others.
12p. 1963. S.75.
Directory of iron and steel plants, 1964. 479p. 1963.
Steel Publications, Pittsburgh. $17.
Frumcnto, Armando. Imprese lombarde nella storia
della siderurgia Italiana, v. 2. II ferro Milanese tra
il 1540 e il 1796. xxix, 505p. 1963. Acciaierie e Ferriere
Lombarde Falck. Milan.
Lombard enterprise story of Italian iron metallurgy, v. 2-
Milan iron from 1450 to 1796.
Frumagalli, Mario. La siderurgia padana; l'industrial
dell-acciaio a settentrione degli Appennini. iv.
132p. 1961. Acciaierie e Ferriere Lombarde FaicV,
Milan. (Monograph 28).
Gentzsch, Gerhard. Fachbibliographie der Unformtechnik.
Bd. 4: Schmieden and Pressen, 1957-1961.
xvi. 493p. 1964. Triltsch, Diisseldorf. 3SDM.
Bibliography on shaping technique, v. A: Forging and eMrussion.

German Federal Republic. Adressbuch der Giesserei-Industrie
in der Bundesrepublik Deutschland.
436p. 1963. Giesserei-Verlag GmbH, Dusseldorf. 25
DM.
Directory of the foundry industry in the German Federal Republic.
(Ed. 3).
Great Britain Directorate of Overseas Geological
Surveys. Statistical summary of the metal industry;
world producton, exports and imports. 1957-1962. 416
p. 1964. H.M.S.O., London. $5.50.
Prepared by Statistical Sect, of the Mineral Resources Div.,
Overseas Geo). Survey!.
Uaisig, Marian. Rzemiosla kowalsko-slusarskic na
Slasku do potowy XVIII wicku. 161p. 1962. Zaklad
Narodowy in. Ossolinskich, Wroclaw.
Ironwork, blacksmithing in Silesia.
Hall, Nathaniel. Directory of metal finishing chemi
cals. Ed. 2. 119p. 1963. Metals and Plastics Pubs. Inc..
Westwood, N. Y. $5.
Ilapak, P. Dejing zeleziarskeho priemyslu na Slovensku
od konca 18. storocia do roku 1S67. 315.20p.
1962. Slovenskej Akad, Vied, Bratislava. Kcs 28. 50.
History of the iron industry in Slovakia from the end of
the 18th century to 1867.
Hatzfeld, Lutz. Die Bergriindung der deutschen
Rohrcnindustrie durch die Fa. Poensgen & Scholler,
Mauel 1S44-1850. t. 1: Darstellung; t. 2: Regesten. xii,
328p. 1962. Steiner, Wiesbaden. 27DM. (Veroffenlichungen
aus dem Archiv der Plioenix-Rhcinrohr AG,
v.l.)
Establishment of the German tube industry due to Pocnsgren
fli Schoiler, in Mauel, 1844-1850. v. 1: Manufacture; v. 2: Administration.
Iron and Steel annual statistics for the United Kingdom,
1962-1963. Pub. with the British Iron and Steel

Federation. 2V. 1963-64. The Iron and Steel Bd., London.
1962. 7s6d; 1963, 15s.
Iron and Steel Board. Research in the iron and steel
industry; special report, 1963. iv, 63p. 1963. H.M.S.O.,
London.
Iron and Steel Institute. Iron and steel industry of
Japan. 130p. 1963. The Institute, London. 63s. (Special
report, 85).
Iron and Steel Institute. Metallurgical developments
in carbon steels. 95p. 1963. The Institute, London. $6.
Kurotvski, Stefan, Historyczny proces wzrostu gospodarczego;
analiza trendow sekukamych na podstawie
produkeji zelaza i stali. Wyd. 1. 432p. 1963.
Panstwowe Wydawn, Naukowe, Warszawa.
Historic process analyzing the increased secularization trend
in the economic production of iron and steel.
Landolt-Bornstein. Zalilenwerte und Funktionen aus
Physik, Chemie, Astronomie, Geophysik und Tcchnik.
Ed. 6, v.4, t.2; Stoffwerte und Verhalten von metallischen
Werkstoffen. Bd-Ta.: Grundlangen, Priifverfahren,
Eisenwerkstoffe. Ed. by Heinz Borchers and Ernst
Schmidt—xii, SSSp. 1963. Springer, Berlin. 46SDM.
Numerical values and functions of physics, chemistry, astronomy,
geophysics and engineering.
Lauersen, W'alther. Jugoslawien, xi, 125p. 1963. Institut
fiir Weltwirtschaft an der Universitat Kiel gemeinsam
mit der Wirtschaftsvereinigung Eisen-und Stahlindustrie,
Kiel. 16DM (Stahlwirtschaftliche Landerberichte,
v. 10).
Yugoslovia (World trade. Iron and steel industry).
Lauersen, W'alther, ed. Polen. vii, 116p. 1962. Institut
fiir Weltwirtschaft, Kiel. 14DM.
Poland (World trade, Iron and steel industry).
10

Marriott, Ewart Nelson. The iron and steel industry
as a career. 127p. 1964. Batsford, London. 12s6d.
Mayer, Karl Ernst. Was der Siemens-Martin-Stahlwerker
von seiner Arbeit wissen muss? 2. ed. 223p.
1963. Verl. Stahleisen, Dusseldorf. 15.S0 DM.
What knowledge did the Siemens-Martin Steelworker acquire
about his work?
Neal, K. W., Comp. Library facts for metallurgists.
7p. 1962. College of Technology Library, Chesterfield,
England.
Norris, James D. Frontier iron, 194p. 1964. State
Historical Society of Wisconsin, Madison, Wise. $4.25.
Case study of the Maramec Iron Works, from 1826 to 1876.
Ochel, Willy. Die wirtschaftlichen Folgen der sieh
andernden Technologie im Eisenhiittenwesen. 30p.
1963. Lange, Duisburg. 3.50 DM.
Paper presented May 30, 1963 at Dortmund.
Economic results of technical changes in metallurgy of iron.
Organization for Economic Co-operation and Development.
Air pollution in the iron and steel industry.
135p. 1963. The Organization, Paris 15s.
Picper, Wolfgang. Theodor Wupperman und die-Vereinigung
rheinischwestfalischer Bandeisenwalzwerke.
Eine studie iiber die Bedeutung der Personlichkeit fiir
die Entstchung und Entwicklung eines Kartells bis
zum Ausbruch des ersten Weltkrieges im Jahre 1914.
194p. 1963. Rheinisch-Westfalischen Wirtschaftsarchiv,
Koln.
Theodor Wupperman and the union of the Rheinish-Westphalia
flat steel rolling mills. A study of the personality of
the origin and development of cartels from the outbreak of the
first world war in 1914.
Reuss, Conrad and Others. Le Progres economique
en siderurgic: Belgigue, Luxembourg, Pays-Pays, 1830-
11

1955. 462p. (1963) Institut de Rccherches Economiqucs
et Sociales del'Universite de Louvain, Belgium.
Economic progress in the iron and steel industry: Belgium.
Luxemburg, the Netherlands. 1830-1955.
Ryland's overseas directory of iron and steel works,
rolling mills, foundries, forging plants, coking plants,
coal-mines, mines and quarries throughout the world.
340p. 1964. Fuel and Metallurgical Jrs., London. 84/-.
Salewski, W. Alte Eisenwerke in Schlesien und
Mahren. 89p. 1962. Galtgaxben-Verlag, Holzminden.
DM 79.
Old ironworks in Silesia and Moravia.
Schiffner, Carl. Alte Hiitten und Hammer in Sachsen.
313p. 1961. Akad. Verlag, Berlin. DM 28.
Ancient furnaces and forges in Saxony.
Schmidt, Johannes Werner. Kriminalitat in der
eisenschaffenden industrie (1951-1957) 112p. 1963.
Rohrscheid, Bonn. 15 DM.
Crime in the iron working industry.
Schueneman, Jean J., and others. Air pollution aspects
of the iron and steel industry, vii, 118p. 1963.
U. S. Public Health Service, Washington, D. C. (Publice
Health Service Pub. no. 999-AP-l.)
Seiko, Ed. Die Eisne, Stahl-und NE-Metall-Industrie
und ihre Heifer, v.p. 1964. Industrieschau-Verlagsges.
Darmstadt. 16.50 DM.
Iron, steel and NE metal industry and assistants.
Steel Founders Society of America. 1963-64 Biennial
directory of steel foundries in the United States, Canada
and Mexico. 1964. The Society, Cleveland. $15.
Stimmel, William D., and Bakes, Jack, comps. Recent
books on metals. An annotated bibliography. 25p.
(1964) Special Libraries Ass'n. Metals Div., N. Y.
12

Temin, Peter. Iron and steel in nineteenth-century
Amercia, an economic inquiry, ix, 304p. 1964. M.I.T.
Pr., Cambridge, Mass. $7.50.
Thomes, Vernon, and Kitts, Albert. Steel: the commanding
height of the economy, with an introduction
by Robert Maxwell, xvi, 48p.'l964. Lincolns-Prager.
2/6.
Tokyo Foreign Service. Japan's iron and steel industry,
1963. 302p. 1963. The Author, Tokyo, Japan.
$10.
United Nation Economic Commission for Europe.
European Steel Market. 1961. 2,v,122p. 1962. 7/-.
Warne, Colston Estey, ed. Steel strike of 1919. 10
1963. Heath. Boston. $1.50.
Watkins Cyclopedia of the Steel Industry, Ed. 10,
1965. 558p. 1964. Steel Publications. Pittsburgh. $10.,
$8.50 (softbd.)
Weisberger, Bernard A., and others. The age of
steel and steam. 160p. 1964. Time. N. Y. $3.95.
Wellinger, Karl, and Gimmel, Paul Werkstoff-Tabellen
der Metalle. Bezeichnung, Festigkeitswerte, Verwendung,
Lieferwerke, Werksmarken. Ed.6. vii, 408p.
1963. Kroner, Stuttgart. 2S DM.
Metals materials tables. Symbols, strength factors, applications,
contractors, production brands.
W'iel, P. Das Ruhrgcbict in Vergangenhcit und Gegenwart.
152p. 1963. Schariothsche Buchhandlung, Essen.
DM 19-.
The Ruhr district, past and present.
Willis, Raymond Edson. Study of the relationships
between fluctuations in the steel and related indus-
13

tries. 16Sp. 1964. U. of Minn., School of Bus. Admin.,
Minneapolis. (Business rept. no.6).
Wirtschaftsvereinigung Eisen-und Stahlindustrie,
Ed. Kostenrcchnungs-Richtlinien Kaltbandwalzwerke.
27p. 1963. Betriebswirtschaftliches Institut der Eisenhiittenindustrie
Diisseldorf. 6 DM.
Cost calculations guide for cold strip rolling mills.
Kostenrechnungs-Richtlinien Eisen-und Stahlindustrie,
I. Erganzungslieferung 1964. 23p. 1964. The Institut,
Diisseldorf. 2.50 DM.
Cost calculations and guide lines for iron and steel industry.
1. Supplementary shipments.
Wirtschaftsvereinigung Eisen-und Stahlindustrie.
Statistisches Jahrbuch der Eisen-und Stahlindustrie fiir
1963. xiv, 319p. 1964. Verl. Stahleisen. Diisseldorf. 15
DM.
Statistical yearbook of the iron and steel industry for 1963.
METAUURGY, REFRACTORIES. TESTING, WORKING
Adenis, D., and Blanchard, P. Fragilite et fragilisation
des metaux ct alliages. xv, 207p. 1963. Dunod,
Paris. 38 FF.
Brittleness and brittle fracture of metals and alloys.
Admiralty Authority of the Lords. Commissioners.
Comparison of transition temperatures determined by
small scale and wide plate tests on as rolled and normalized
plates from the same cast of steel. 24p. 1962.
HMS., London. (Rpt. no. P4).
Available from British Information Services, N. Y. $1.20.
Akademia Nauk, SSSR. Institut Fiziki Metalloo.
Betatronna gamma-defektosopia stali. Ed. by A. N. Orlov
and I. G. Fakidov. 56p. 1961. The Academy, Moscow.
$4.
Betatron gamma-defectoscopy of steel.
11

Aleksecnko, M. F. Struktura i svojslva teplostojkich
konstrukcionnych i nerzavejuscich stalej. 215p.
1962. Gosudarstevennoc Naucno-Techniccskoc Izdatelstvo
Obogongiz, Moscow.
Properties of heat stable constructional steels. National Institute
of Scientific Literature. Moscow.
Allmand, T. R. Microscopic identification of inclusions
in steel. 72p. 1962. B.I.S.R.A., London.
Alloy Digest. Orbit (Tough Tool Steel, Type A6)
1 p. 1963. The Digest, TS-131.
Almen, John O., and Black, Paul H. Residual stresses
and fatigue in metals. 226p. 1963. McCraw, N. Y.
$12.50.
American Institute of Mining, Metallurgical and
Petroleum Engineers. Blast Furnace, Coke Oven and
Raw Materials Commission. Metallurgical Society of
the A.I.M. and P. E. Proceedings, v. 21, 1962. p.1963.
Interscience, N. Y. $15.
American Iron and Steel Institute. High temperature
high strength alloys. 155p. 1963. The Institute. N. Y.
$2. (Contributions to the metallurgy of steel).
American Iron and Steel Institute. Introduction to
high-strength low-alloy steel sheets. 19p. 1964. The
Institute, N. Y.
American Iron and Steel Institute. Steel Products
Manual. Alloy Steel Sheets and Strip. 36p. 1963. The
Ass'n. New York.
Carbon steel; plates, structural sections; rolled floor
plates; steel sheet piling. 62p. 1963.
Carbon steel pipe, structural tubing, line pipe and
oil country tubular goods. 60p. 1964.
15

Carbon steel strip. 57p. 1964. The Instiute. N. Y.
Flat rolled electrical steel, 36p. 1964.
Stainless and heat resisting steels. 117p. 1963. Gratis.
Tool steels. 72p. 1963. Gratis.
Wire and Rods, Carbon Steel. Rev. 131p. 1963.
American Society for Metals. Strengthening Mechanisms
in Solids, viii, 416p. 1962. The Society, Metals
Park, Ohio. $15.
American Society for Metals. Committee on Furnace
Atmosphere. Furnace atmosphere and carbon control,
xiii, 200p. 1964. The Society, Metals Park, Ohio.
$5. (ASM monographs on heat treating).
American Society for Testing Materials. STP no.
364: Comparison of the properties of basic oxygen and
open hearth steels. 30p. 1964. $1.50. (Members $L).
American Society for Testing Materials. S.T.P. No.
345: Symposium on materials for aircraft, missiles, and
space vehicles, 1962. 143p. 1963. $7. (Members $4.90).
American Welding Society. Brazing Manual. 290p.
1963. The Society, N. Y. $7.50.
Armour, J. D. Progress Report on the Development
of Better Machining Carbon Steels. Sp. 1963. A.S.M.,
Metals Park. Ohio. "(Tech. Report No. 21-3.)
Associazione Italiana de Metallurgia. Centro Ricerche
Spettrochimiche, Spettro di Arco del Ferro e
Righe Analitiche di 55 Elcmenti, by R. Intonti and A.
Taddeucci. 52p. 1961. The Association, Milan. $35.
Arc spectrum of iron and spectrum analysis of 55 elements.
Austel, Willi. Beitrag zum Verfestigungsverhalten
und zu Ausscheidengsvorgangen aus dem Y-Mischk-
16

istall eines Manganhartstahles mit O.S% Chrom. 20Sp.
1962. Techn. Hochsch., Aachen.
Dissertation: Contribution to the solidification behavior and
the separation preparation from Y mixed crystals to an austenitic
manganese steel with 0.8% chromium.
Austin, James B. Trends in the metallurgy of lowalloy,
high-yield-strength steels. 12p. 1964. A.S.T.M..
Philadelphia. $1.
Baare, Rolf-Dieter. Besonderheiten bei der Herstellung
und Erstarrung unberuhigter weicher Stahlqualtiiten.
29p. 1962. Technical University Berlin.
Dissertation: Peculiarities of manufacture and solidification
of rimmed steel quality.
Baker, Sir John Fleetwood. Plastic Design in Steel
to B.S. 96S. 24p. 1963. British Constructional Steelworks
Association, London. 2/6. (Publication No. 21.)
Bashforth, George Reginald. Manufacture of iron
and steel. Ed. 3. v.l: Iron production, xiii, 334p. 1964.
45/-.
V. 2: Steel production, x, 479p. 1964. 56/-.
Becker, Horst. Die Obcrflachenspannung von Eisen,
Nickel und Chrom-Nickel Stahlen. 73p. 1963. U. Berlin.
Dissertation. Surface tension of iron, nickel and chromenickel
steels.
Beliaev, Vasilii Ivanovich. Problems of metal fatigue.
78p. 1963. (1964) Israel Program of Scientific
Trs., Jerusalem. (D. Davey, N. Y.) $3.95.
Bcnard, Jacques, ed. Uoxydation des mctaux, t. II.
517p. 1964. Gautlucr-Villares, Paris. $13.
Oxidation of metals.
Bcnbow, W. E., ed. Steels in modem industry. 562p.
1964. Iliffe, London. 42s.
IT

Bennett, P. E., and Sinclair, G. M. Parameter representation
of the yield behavior of iron. 6p. 1963.
(ASME Paper no. 62-WA-263).
Bernstein, M. L., and Rachstadt, A. G., eds. Metallovedenie
i termiceskaja obrabotka stali. Spravocnik.
t.1-2 Ed.2. Moscow. 747p. 1961. t.l 31, 50 DM., ti.
1962. p.756-1656. 50 DM.
Metallography and heat treatment of steel. Handbook.
Bertossa, Robert C. Methods for brazing unusual
metal combinations, lip. 1963. A.S.M., Metals Park,
Ohio. (A.S.M. Technical Report, No. 1-2).
Betz, Carl Egmont. Principles of Penetrants. 442p.
1963. Magnaflux Corp., Chicago. $7.35.
Bidwell, J. B., ed. Rolling contact phenomena. Symposium,
1960. 438p. 1962. Elsevier Pub. Co., Amsterdam.
DF1. 50.
Boetz, V. Die Kaltformung von Stahl und NE-Metallen.
Betriebsbucher. t.5. 75p. 1963. Hanser, Munich. D.
M. 7.80.
Cold forming of steel and NE metals.
British Cast Iron Pressure Pipe Association. Cast
Iron pipe. 28p. 1963. The Assn., London.
Buch, Alfred, ed. Fatigue resistance of materials and
metal structural parts; proceedings of an international
conference held at Warsaw, viii, 313p. 1964. Macmil-
Ian, N. Y. $15.
Btthlcr, Hans, I- Pfalzgraf, Georg. Untersuchungen
iiber den Abbau von Eigenspannungen in Gusseisen
und Stahl durch mechanisches Riitteln und Langzeitlagerung
im Freien. 56p. 1962. VDI-Verlag. Diisseldorf.
Investigation into the decomposition of residual stress in pig
iron and steel due to vibration and prolonged storage outdoors.
18

Caho, F. A., and others. Studies of the welding
metallurgy of steels. 71p. 1963. British Welding Research
Association. Cambridge. 21/-.
Canada Department of Mines and Technical Surveys.
Research Report. No. R-95: Influence of uranium
additions to ferrous alloys. An interim rpt., prepared
by R. F. Knight and D. K. Faurschou. xxvii. 320p.
1962. $1.
Cazaud, R. Aide-Memoire Dundod: Metallurgie.
246p. 1964. Dunod, Paris, S Fr. fr.
Dunod Vade-Mecum: Metallurgy, v. 1. Includes steel casting,
ordinary and special steels, etc.
Ceskoslovenska Vedecko Technicka Spolecnost, ed.
Symposium iiber Ermiidungsfestigkeit. Praha, 8-10
Sept. 1960. cc, 523p. 1961. The Author.
Symposium on fatigue strength. Praha. 8-10 Sept. I960.
Chamouard, A. Estampage et forge, t.l. Statique
appliquee aux deformations a chaud par forgeage,
filage et matricage. xii, 194p. 1964. Dunod, Paris. 18F.
Stamping and forging. Statics applied to cold deformation
by forging, spinning and die working.
Coburn, K. G. Aluminum-coated steel sheets. 25p.
1963. ASM. Metals Park. Ohio. $3 (Member $1.50)
(ASM,TR no. 21.6).
Conference on unwanted variation in steel composition
— Cause and effect, viii. 147p. 1963. West of
Scotland Iron and Steel Institute. Glasgow. (Journal
v.70, 1961-1963).
Congres International sur les Acieries a Voxygene
Le Touquet, 1963. Developpement et controle des
acieries a Toxygene. 518p. 1964. The Congress, Le
Touquet. 50 f. fr.
Development and control of oxygen steel.
19

Cook, Nelson E. Galvanizing: A major ally of carbon
steel. 8p. 1963. A.S.M., Metals Park, Ohio. (A.S.M.
Technical Report #21-7.)
Cs. V. T. H. - H. S. (s.S.K.) Sekse Severomoravsk
Kraji (s.S.K.) Ostravske lutnicke a slevarenske khlokvium,
1962. Sbornik uvodnich pied nasek. 4v. 1963.
The Author, Ostrava.
Metallurgy and casting at Ostravo. Colloquim, 1962.
Damask, A. C, and Dienes, G. J. Point defects in
metals, xiii, 314p. 1963. Gordon and Breach, N. Y.
$19.50 (Prof. ed. $9.50).
Dingley, D. J., and McLean, D. Friction Stress in
Iron. 12p. 1963. British Iron and Steel Research Association,
London.
Draigor, David Abramovich, and VaFchuk, G. I.
Size effect in wear and fatigue of steel, ed. by F. P.
Belyankin. S7p. 1964. Daniel Davey, N. Y. $3.95.
(Also Israel Program for Scientific Translations, Jerusalem
$3.50).
Edneral, F. P. Electrometallurgv of Steel and Ferr
Alloys. 576p. 1962. Current Book House, Bombay. $12.
Elliott, John Frank, and Gieiser, Molly. Thermochemistry
for steel making; thermodynamic and transport
properties, v.2. p.297-S46, 1963. Addison-Wesley,
N. Y. $25.
Elsing, Leo. Anderung des Spannungs Dchnungs.
Verhaltens von technischem Reineisen und nickellegiertem
Eisen im Zugversuch bci verschiedenen Verformungsgeschwindigkciten
und bei Temperatures
20

von +20 bis +350° C. 60p. 1963. Techn. Hochsch
Aachen.
Dissertation: Deformation of strains —• stresses. Behavior
of technical concentrated iron and nickel alloy irons in tensile
tests with various deformation velocities and with temperatures
from -J-20 to +350° C.
Eugenio, Manuel Romulo. Determination of preferred
orientation in rolled electrical steels using single
diffraction of neutrons. 120p. 1963. Univ. of Maryland,
College Park, Md.
Thesis.
Everliart, John L. Impact and cold extrusion of metals.
208p. 1964. Chemical Pub. Co., N. Y. $850.
Freudenthal, A. M., and others. High temperature
structures and materials. 463p. 1963. Macmillan, N. Y.
$15.
Glenn, D. M., and Bryan, J. C. Organic coatings for
sheet steel. 15p. 1963. ASM, Metals Park, Ohio. $3.
(Members $1.50).
Goldshtein, M. I. Primencnie Radiokalvnykh Izolopov
Dlya Izucheviya Stal'Nogo Slitka. 184p. 1963.
Metallurgizdat, Moscow.
Use of radioactive isotopes in steel ingot structure studies.
Grasshoff, Hans Wilhclm. Langsmagnetostriktion
von Stiihlen in Abhangigkeit von chemischer zusammensetaung
und Gefugebau. 86p. 1963. Techn. Hochsch.,
Aachen.
Dissertation: Prolonged magnetostriction of steel in dependence
on chemical composition and building structure.
Great Britain. Navy Dept. Advisory Comm. on
Structural Steel. Current research work in the United
Kingdom on brittle fracture of mild steel. 2nd review.
v, lip. 1964. H.M.S.O., London. 4/6.
21

Gregory, Edwin, and Simons, Eric N. Steel working
processes; principles and practices of forging.
rolling, pressing, squeezing, drawing and allied methods
of metal forming. 240p. 1964. Odhams, Lond.
(Dist. Transatlantic. Hollywood-by-thc-Sea) $6.75.
Groetschel, Winfred. Beitrage zum auskoch und
Erstarrungsverhalten unberuhigten Stahls. 53p. 1964.
Bergakad., Clausthal.
Dissertation: Contributions on the boil off and solidification
checks on rimmed steels.
Grossmann, M. A., and Bain, E. C. Principles of heat
treatment. Ed. 5. 312p. 1964. ASM, Metals Park, Ohio.
$8.95. (Members $7.25).
Hadjisaroso, Poernomosidi. Der Sauerstoffabbau
wahrend dcs Blockerstarrung bei unbcruhigt vergossenem
Stahl. 49p. 1963. Bergakademie, Clausthal.
Dissertation: Oxygen destruction endurance of solidified
ingot with unstabiliied cast steel.
Hanchen, Richard. Dauerfestigkeitsbilder fur Stahl
und Gusseisen. 5Sp. 1963. Hanser, Miinchen. 7.S0 DM.
Endurance limit diagrams for steel and cast iron.
Handyside, James R. Properties of modem high
speed tool steels, 22p. 1964. ASTME, Detroit.
Haugc, Bjarne. Jem og stal, framstilling og bearbeiding;
handbok for smeder, mekanikere m. fl. 8. utg.
260p. 1962 (1964). Yrkesopplaeringsradet for handverk
og industri, Oslo.
Iron and steel manufacture and finishing. Handbook for forger
and mechanic.
Heinridi, E. Die Werkzuegstiihle. Ed. 2. 55p. 1964.
Springer, Berlin. 4.50 DM.
Tool steels.
Heyman, J. Structures and solid body machines.
v.l. 142p. 1964. Pergamon Pr., Oxford. £0.17.7.
Beams and framed structures.
22

Himmel, L., ed. Recovery and recrystallization of
metals, x, 3S9p. Wiley, N. Y. $20.
Hohmann, Klaus. Warmebehandlung aus der Schmiedehitze
zur Verbesserung der Zerspanbarkeit. 38p.
1964. Techn. Hochsch., Hannover.
Dissertation: Heat treatment as a forging temperature foi
improvement of machinability.
Holshouser, William L. Failure in aircraft parts
made of ultra strength steel. 14p. 1963. ASM, Metals
Park, Ohio. $3. (Members $1.50) (ASM Tech. Report
no. 11-1).
Illinois University. Civil Engineering Studies. Structural
Research Series.
No. 267: Analytical study of composite beams with
inelastic shear connection, by Peter Kuang Hsum Dai
and C. P. Siess. viii, 113p. 1963.
No. 270: Fatigue tests of plates and beams with
stud shear connectors, by Kenneth A. Selby and others.
v, 681. 1963.
No. 273: Fatigue crack propagation in notched mild
steel plates, by Stanley Theodore Rolfe and W. H.
Munse. 9p. 1963.
No. 278: Thin web girder fatigue behavior as influenced
by boundary rigidity*, by L. R. Hall and J. E.
Stallmeycr. x, 14p. 1964.
No. 280: Calibration tests of A490 high-strength
bolts, by Emile Wm. John Troup and E. Chesson,
Jr. iv, 17, 171. 1964.
Illinois University. Department of Theoretical an
Applied Mechanics. Report.
No. 235: Influence of temperature and strain rate on

crack toughness of mild steel, by Alan Kent Shoemaker,
vii, 351. 1962.
No. 245: Effects of repeated loading and moisture
on the fracture toughness of SAE 4340 steel, vi, 21,
151. 1963.
International Conference on Fatigue Effects, I960.
Warsaw. Fatigue resistance of materials and metal
structural parts. Ed. by Alfred Buch. viii, 315p. 1964.
Pergamon. Oxford. £5.
Iron and Steel Board. Research in the iron and
steel industry, Special Report, ix, 63p. 1963. H.M.S.O.,
London 4/6.
Iron and Steel Institute. Carbon Steels. 95p. 1963.
The Institute, I.ondon. 45s. (Special report, 81).
Iron and Steel Institute. Fume arrestment; reports of
the proceedings of the autumn general meeting, 26-27
Nov. 1963. 172p. 1964. The Instiute, London. 65s.
/ron and Steel Institute. Recent developments in
annealing. 149p. 1963. The Institute, London. 70s.
(Special report, no. 79).
Jackson, Albert. Oxygen steelmaking for steelmakers,
viii, 258p. 1964. Newnes, London. £2 10s.
Kahles, John F., and Zlatin, Norman. Machining
data — Its impact on the economics of machining ol
carbon steels. 19p. 1963. ASM, Metals Park, Ohio.
$3. (Members $1.50). (ASM, Tech. Report no. 21-2).
Kauczor, Egon. Metall unter dem mikroskop. 59p.
1964. Springer, Berlin. 4.50 DM.
Metal under the microscope.
Keil, F. Hochofenschlacke. Ed.2. xi, 392p. 1963. Verlag
Stahleisen, Dusseldorf. DM 54.
Blast furnace slag.
24

Kirkaldy, J. S., and Ward, R. G., eds. Aspects of
modern metallurgy. 356p. 1964. L'. of Toronto Pr.,
Toronto. $20.
Kochendorfer, Albert. Physikalische grundlagen der
Formanderungsfestigkeit der Metalle. 55p. 1963. Verl.
Stahleisen, Diisseldorf. 16.S0 DM.
Physical basis for mean tensile strength of metals.
Krishnan, R .A/., ed. Symposium on ferro alloy industry
in India. 244p. 1963. Technical Journals of India,
Private, Ltd., Jamshedpur.
Lashko, N. F., and I^ashko-Aoakyan, S. V. Brazing
and soldering of metals. 414p. 1961. Israel Program for
Scientific Translations, Jerusalem.
Lazarenko, B. R., ed. Electrospark machining of
metals, v.2. 195p. 1964. Consultants Bur., N. Y. $22.50.
Letort, Yves. Produits refractories et isolants. Nature,
fabrication, utilization. 149p. 1963. Centre
d'Etudcs Superieures de la Siderurgie, Metz. 50F.
(Cahiers du CEESSID. no. 3,2. aufl.)
Includes Halm, Louise: Essais des produits refractaires et
isolants.
Refractory and insulation products. Nature, manufacture,
use.
Includes tests of refractory and insulating products.
Liestmann, Wulf Dietrich. Die Wasserstoffgehalte
bei der Erzengung von Sauerstoffaufblasstahlen. 26p.
1963. Bergakad, Clausthal.
Dissertation: Hydrogen content in the production of oxygen
steel.
Meskin, Veniamin Semenovich. Osnovy Legirovmnia
Stali. 6S8p. 1959. $10.
Steel alloy foundation.
Monkemoller, Fr., and Holtzliausen, Paul, eds.
Stahlfibel. lOOp. 1964. Verl. Stahleisen i Komm. Dus-
25

seldorf. 1964. 3 DM (Mongraphien iiber Stahlverwendung,
v.5.)
Steel primer.
Oehler, Gerhard, and Kaiser, Fritz. Schnitt-, Stanzund
Ziehwerkzeuge. Unter bes. Berucksichtigung der
neuesten Verfahren und der Werkzeugstiihle mil
zahlreichcn. Ed. 4. viii. 614p. 1962. Springer, Berlin.
54 DM.
Cutting, punch and drawing tools. Significance of recent
methods with numerous tool steels.
Olsen, Kai V. Surface roughness as a functon of
cutting in finish turning of steel. 15p. 1964. (ASTME,
Paped no. 655).
Olszak, Feliks. Metalurgia stali. v p. (1963) Comiczo-Hutnicze
Katowice, Wydawn.
Steel metallurgy.
Osipov, K. A. Heat resistance of metals and alloys.
252p. 1961. Israel Program for Scientific Translations,
Jerusalem.
Palmgrcn, Arvid. Grundlagen der Walzlagertechnik.
Ed. 3. 264p. 1964. Franckh. Stuttgart. 29.50 DM.
Fundamentals of roller bearing technique.
Pantke, Heinz-Dieter. Cbcr die verzbgerungsfreie
Oberwachung der Entkohlungsreaktion bei Blasstahlverfahren.
45p. 1962. Tech., Univ.. Berlin.
Dissertation: On the free retardation control of decarburization
reactions with the blast steel process.
Patterson, Wilhelm, and Weskamp, Wilhclm. Versuche
zur Steigerung der Temperatur in der Schmelzzone
des Kupolofens und zur Erzielung eines optimalen
thermischen Werkungsgrades durch Verwendung
von HC-Koks in unterschiedlicher Stuckgrosse. 87p.
26

1961. Westdl. Verl., Koto. 22 DM. (Forschungsberichte
dcs Landes Nordrhein-Westfalen, no. 963).
Tests on temperature increase in the smelting zone of cupola
furnaces and reaching the best thermal efficiency by using HCcokes
in various lump sizes.
Pcckncr, Donald, ed. Strengthening of metals, vi,
250p. 1964. Rcinhold, N. Y. $12.50.
Pisek, Frantisek, and Jenicck, Ladislav. Xauka o
materia hi. v. 3 Svazek 1: Prehled vyvoje marterialu
teorie hutnickych pochodu obecne hutnictvi. Svazek 2:
Vyroba zeleza, oceli a nezeleznych kovu nekovove materialy.
v. 1. 456p., v .2. 916p. 1962. Nakl. Ceskoslovenske
Akad. Ved., Praha. 150 Kch.
Construction materials: v. 3. pt. 1: General fundamentals for
metallurgical engineering procedures, pt. 2: Production of iron,
steel and non ferrous metals.
Polushkin, Eugene Paul. Structural characteristics of
metals, (iii) 221p. 1964. American Elsevier. N. Y.
$7.75.
Portevin, P. A. Influence de differents oligo elements
sur la forgeabilite de l'acier midur. 59p. 1962.
Thesis. University of Paris. Influence of different elements
on the forgibility of semi-hard steel.
Production Engineering Research Association of
Great Britain. Cold extrusion of carbon steels. Pt. 1:
Effect of carbon content and heat treatment of slugs.
27p. 1959. Melton Mowbray. 10s. 6d. (PERA report
no. 69.)
Prutton, M. Thin ferromagnetic films. 278p. 1964.
Butterworth, Washingtn, D. C. $14.75.
Pryer, Vernon. Heat treatment of powdered iron
parts. 5p. 1963. A.S.M., Metals Park. Ohio. $3. (Members
$1.50) (ASM Tech. Report no. 14-1.)
Reed-HUI, Robert E. Physical metallurgy principles.
630p. 1964. Van Nostrand. Princeton, N. J. $10.95.
27

Romanov, V. V. Stress-corrosion cracking of metals.
153p. 1961. Israel Program for Scientific Translation.
Jerusalem.
Roos, A. Precis de metallographis appliquee. xx.
456p. 1963. Dunod, Paris 68F.
Summary of applied metallography.
Rote, Richard S. Investigation of the properties of
electroslag welds in various steels. 13p. 1964. ASTME,
Detroit.
Ryss, Mark Abramovich, and KJiodorvskii, A. N.
Production of ferroalloy. 278p. 1963. Universal Distributors.
$2.60.
Samsonov, G, V. High-temperature materials, v.2;
Properties index. 41Sp. 1964. Plenum Pr., N. Y.
Sims, Clarence E., ed. Electric furnace steelmakiog,
v. 1: Design, operation and practice; v.2: Theory and
fundamentals. 404, 471p. Wiley, N. Y. v. 1. $9., v. 2.
$11.
Smith, Phillip Hartley, ed. Mechanical working of
steel. I. 425p. 1964. Gordon and Breach. $8.75 (Members
$6.)
Proceedings of the Fifth Technical Conference sponsored
by Mechanical Working and Steel Processing Committee, 1963.
(Metallurgical Society Conference Ser.. v. 21.)
Sommcr, Franz, and Plockinger, Erwin. Elektrostahlcrzeugung.
Ed. 2. xiii, 55Sp. 1964. Verl, Stahleisen.
Diisseldorf. 78 DM.
Electric steel production.
Spruth, Fritz, and Scltaefer, Willwlm. Kleine Stahlkunde
fiir den Grubenausbau. 71p. 1962. Verl. Stahleisen,
Diiseldorf. 4 DM.
Steel information for mine improvement.
Symposium on stainless steels, 1963. 548p. Ccskos-
28

lovenska Vedecko Technicka Spolecnost Vyzkummy
Ustav Hutnictvi Zeleza, Czechoslovakia.
Tarnovskii, 1. Ya, and others. Deformation of metal
during rolling. 220p. 1964. Pergamon, N. Y. $10.
Tselikov, A. I., and Smirnov, V. V. Rolling mills.
426p. 1964. Pergamon, N. Y. $15.
Tsylev, Leonid Mikhailovich, ed. Smelting of ferroalloys
in the blast furnace using oxygen-enriched
blast: a collection of articles. 5. 175p. 1963. Pergamon,
N. Y. $9.75.
United Kingdom Atomic Energy Authority. Production
Group. Analytical method for the determination
of carbon in carbon steels and stainless steels. 2,
lOp. 1964. H.M.S.O., London 3/-. (P. G. Rpt. no.
540 (S) ).
Verein Deutscher Eisenhuttenleute, ed. Stahleiscn
Kalender. 3S3p. 1964. Verlag Stahleisen, Dusseldorf. 5
DM.
Iron and steel vade-mecum.
Wagener, Horst. Gleischgewichte der Eisen-Kohlenstoff-Legierungcn
mit CO/CO: und CH«/Hi Gemischen
im Temperaturbereich von 550 bis 1200°C und
ihre thermodynamische Auswertung. 77p. 1963. Bergakad,
Clausthal.
Dissertation: Equilibrium of iron-carbon alloys with CO/CO]
and CFiVHi composition in temperature range from 550 to
I200°C. and its thermodynamic evaluation.
Wells, John Thompson. Threshold effects in neutron
elastic scattering. 149p. 1963. Stanford University,
Stanford. California.
Thesis. Includes iron.
West of Scotland Iron and Steel Institute. Failur
29

a boiler during hydrostatic test at Sizewell nuclear
power station. SOp. 1964. (Special rept.).
Tests were made on welded Mn-Cr-Mo-V steel plate.
Wirth, Gunter. Einfluss des Aushartens und der Verformung
auf das Kriechverhalten einiger hochwamv
fester Metall-Legierungen auf chrom-nickel-kobalteisen-grundlage.
72p. 1962. Tech. Hochsch, AAchen.
Dissertation: Influence of aging and deformation creep behavior
united on high heat resistant metallic alloy of chromium-niclcel,
cobalt and iron base.
DESIGN AND CONSTRUCTION
American Institute of Steel Construction. Manual
of steel construction. Ed. 6. 750p. 1963. The Institute,
N. Y. $7.
American Iron and Steel Institute. Design in steel;
(Graphic Record of the Design in Steel Award Program)
47, (2)p. (1963). The Institute, New York.
American Iron and Steel Institute. Design manual
on steel electrical raceways (Rev. ed.) 143p. 1963. $1.
American Iron and Steel Institute. Light gage coldformed
steel design manual. Ed. 4. 127p. 1962. The
Institute. Gratis.
American Society of Civil Engineers. Structural
Div.. Pittsburgh Section. Proceedings of the Conference
on composite design in steel and concrete for
bridges and buildings. March 27-28, 1962. Pittsburgh,
Pa. v.p. (1963) The Association.
Atrops, Hans. Stiihlerne Druckrohrvcrzweigungen:
Entwurf und Berechnung. 163p. 1963. Springer. Berlin.
34.50 DM.
Steel pressure pipe junctions: design and calculation.
Beratungsstelle fur Stahlvcrwendung. Ed. Stahl und
30

Form, Gcschmiedete Skulpturen von Paul Aschenbach
Einfiihrungstext: Wolfram A. Wienhold. 32p. 1964.
Verl. Stahleisen, Diisseldorf. 3 DM.
Steel and form. Forged sculptures.
Bcratungsstelle fur Stahlverwendung Ed. Stahl und
form. Wandplastiken von H. Carl Scherer. Einfiihrungstext:
Elisabeth Wilhelms. 33p. 1963. Verl. Stahleisen,
Diisscldoif. 4 DM.
(Recommended situations for steel use.) Steel and form.
Wall sculpture.
Blodgett, Omer W. Design of weldmcnts. v.p. 1963.
James F. Lincoln Arc Welding Fd., Cleveland. $5.
Bouwccntrum, Ed. Modern steel construction in
Europe. 287p. 1964. American Elsevier, N. Y. $22.
British Constructional Steelwork Association. Use
of welding in steel building structures. New ed. Rev.
in accordance with the requirements of B.S. 4-19:1959,
by G. Bernard Godfrey. 36p. I960, (1964) The Association,
London. 3/6 (Pub. no. 14.)
Buchenau, IL, ed. Stahlhochbau. Ed. 16. by B. J.
Stolze, v.l. vi, 144p. 196-1. Teubner, Stuttgart. 19.20
DM.
Steel building construction.
Firth Brown, Ltd. Firth Brown alloy constructional
steels. 2Sp. 1963. The Company, Sheffield.
Franz. Gottliard. Konstruktionslchre des Stahlbetons.
400p. 1963. Springer, Berlin. DM 66.
Steel concrete construction theory.
Goodwin, Edward. Plastic design of steel structures.
beams and portals. 1, 64p. 1964. Draughtsmen's & Allied
Technicians Assn., Richmond (Sy) 5/-.
Larkman, Brian, and Glenister, S. H. Contemporary
31

design in metalwork. vii, 119p. 1964. Murray, London
(Transatlantic. Holly-wood-by-the-Sea, Fla.) $6.75.
Includes Scandinavian wrought ironwork.
Lindsay, John Seymour. Anatomy of English
wrought iron. 60p. 1964. Irvin, Clarke. $9.50.
Popescu, Victor. Consrructii metalice. 472p. 1963.
Editura Tecbnica, Bucharest.
Metal structures.
Schwaigerer, Siegfried. Festigkeitsberechnung von
Bauelementen des Dampfkessel, -Behalter-und Rohrleitungsbaties.
x, 127p. 1961. Springer, Berhn. 3250
DM.
Strength calculations of structural elements of steam boiltis.
vessels, and tubing structures.
Swiss Structural Steelwork Federation. Technical
Comm.. ed. Tables pour la construction metallique.
Ed. 3. 85p. 1964. Verlag Schweizer Stahlbau-Vereinigung,
Zurich. 17 Sw. fr.
Tables for steel construction.
Verein DeutscJien Eisenhuttcnleute. Stahlbau-Pro-
61c. (Ed. 11, ed. by Martha Schneider-Burger) 48p.
1963. Verlag Stahleisen, Diisseldorf. 4.40 DM.
Steel structural sections.
Wippel, Herbert. Berechnung von Verbundkonstrucktionen
aus stahl und Beton. 161p. 1963. Springer,
Berlin. DM 39.60.
Design of composite construction in steel and concrete.
AUTOMATION AND COMPUTERS
Bannykh, A. L, ed. Resultants acquis dans le domaine
du hautfourneau a l'usine de magnitofforsk 183o.
1961. IRSID. Metz.
Results established in the blast furnace by use of the m«fr
netoscope.

Bradfield, C. Use in industry of elasticity measurements
in metals with the help of mechanical vibrations,
xi, 159p. 1964. II.M.S.O.. London. $2. (National
Physical Laboratory. Notes on applied sciences no.
30.)
Institution of Metallurgists. Instrumentation in the
metallurgical industry. 130p. 1964. Iliffe, London. 37s.
6d.
Potthast, Ernst. Untersuchungen uber die Existenzbereichc
der Eisenkarbide mit Hilfe der Elcktronenmikroskopie
und Elektronenbeugung. 63p. 1963. Tech.
Hochsch., Aachen.
Dissertation: Investigations on the existing zones of iron
carbide with aid of electron microscopy and electron diffraction.
CODES - STANDARDS
American Society for Testing and Materials. 1964
Book of ASTM standards, pt. 1: Steel piping materials.
552p. 1964. $10. (Members $7.)
American Society for Testing and Materials. ASTM
Specifications for steel piping materials. Ed. 19. A1.514
xiip. The Society, Phil. $7. (Members $5.60).
Belgian Standards Institution. Draft Belgian Standard.
No. NBN 631: Thick and medium plates, wide
flats. Rolled steel bars and sections for general
purposes, for steel construction (quality standard)
1964. Supercedes in part standards 152-154. (1950)
Corresponds to European standards 25 and 28.
British Cast Iron Research Association. British and
foreign specifications for steel castings. Pt. 1. 81p.
1963. The Association, Sheffield. 50s.
33

British Standards Institution.
No. 29:1963: Carbon steel forgings for shipbuilding
and general engineering purposes. 3rd rev. 12p. 1963.
4/-.
No. 639:1964: Covered electrodes for the manual
metal-arc welding of mild steel and medium-tensile
steel. 2nd rev. 29p. 1964. 7/6.
No. 709:1964: Methods of testing fusion welded
joints and weld metal in steel. 2nd rev. 34p. 1964.
10/-.
No. 785: Pt. 2:1964: Hot rolled bars and hard drawn
wire for the reinforcement of concrete. 1st rev. Pt. 2:
Hard drawn mild steel wire. 9p. 1964. 4/-.
No. 1449:1964: Steel plate sheet and strip. 2nd
rev. Pt. 2A: Carbon steel plate—rolled by the noncontinuous
process. 16p. 1964 5/-.
Pt. 2B: Carbon steel rolled by the non-continuous
process. 16p. 1964. 5/-.
Pt. 3A: Hot rolled mild and carbon steel strip. 19p.
6/-.
Pt. 3B: Cold rolled mild and carbon steel strip. 28p.
1964. 10/-.
No. 1639:1964: Methods for bend testing of metals.
ISp. 5s.
No. 1775:1964: Steel tubes for mechanical, structural
and general engineering purposes. 1st rev. 56p.
1964. 12/6.
No. 1856:1964: General requirements for the metalarc
welding of mild steel: 1st rev. 31p. 1964. 10/-.
No. 2094: Pt. 9: 1964: Glossary of terms relating to
34

iron and steel. Pt. 9: Iron and steel founding. 48p.
1964. 15/-. F
No. 2451:1963: Chilled iron shot and grit. First rev
7p. 1963. 4/-.
No. 3603: 1963: Steel pipes and tubes for pressure
purposes. Carbon and alloy steel: low temperature
duties. 24p. 1963. 6/-.
No. 3605:1963: Specification for steel pipes and
tubes for pressure purposes. Austenitic stainless steel.
24p. 1963. 6/-.
No. 3706:1964: Mild steel for general engineering
purposes. 19p. 1964. 5/-.
No. 3737:1964: Guide to series of basic sizes for
metal sheet, strip and wire. 83p. 1964. 30/-.
No. 3740:1964: Steel plate clad with corrosion-resisting
steel. 16p. 1964. 6/-.
No. 3745:1964: Method for the evaluation of results
of accelerated corrosion tests on metallic coating. 17p.
1964. 6/..
No. 3S100:1963: Inspection and testing procedure
for aircraft material steel. 35(1 )p. 1964. 20s.
Deutscher Normenausschuss. DIN Normblattverzneichnis.
916p. 1963. Beuth-Vertrieb GmbH. Berlin.
DM 48.
German standards.
Deutschen Normenausschuss and Verein Deutscher
Eisenhuttenleute, Ed. Kurznamen und Wcrkstoffnummcrn
der Eisenwcrkstoffe in DIN-Normen und Stahl-
Eisen-Werkstoffblattem. Ed. 4. 1964. Verl. Stahleisen,
Diisseldorf.
Short name and raw materials listing of iron raw materials
in DIN standards and steel-iron raw materials scales.

Mexico, Direccion General de Normen. Metodos de
analisis quimico del acero; proyectos de recomendaciones
panamericanas, seminarios de normalizacion,
CPANT, ILAFA, OEA. 34, 961. 1962. The Author,
Mexico.
Methods for chemical analysis of steel: plans and recommendations
of Pan America standardization seminar.
CORROSION - PROTECTIVE COATINGS
Bregman, J. I. Corrosion inhibitors. 320p. 1963.
Macmillan, N. Y. $12.50.
Corrosion Prevention and Control. Anti-corrosion
manual. Ed.5. 349 p. 1964. The Author, London.
63/-.
Internalioiml Congress on Metallic Corrosion, 2nd,
1963. Proceedings, about 1000 p. 1964. National Association
of Corrosion Engrs., Houston, Texas. $50.75.
Johnson, W. E., and Hadley, R. L. One-coat porcelain
enameling steels. 12 p. 1963. ASM, Metals Park.
Ohio. (ASM Tech. Report no. 21-5).
Kutzelnigg, Artur. Test for metallic coatings, 223 p.
1964. Dunod, Paris. $5.75.
Marti, Bruno. Ober die atmospharische Korrosion
von Stahl. iii, 49 p. 1963. Verband Schweizerischer
Lack-und Farbenfabrikaten, Zurich. 1950 S. Fr.
Atmospheric corrosion of steel.
Nonn, Helmut, Einfluss der Oberflachenstruktur von
Stahl und Gusseisen auf die Ausbildung rissfreier, galvanischer
Hartchromschichtcn. 20 p. 1963. Techn.
Hochsch., Aachen.
Dissertation: Influence of surface area on steel and cast
iron on the formation of flawless galvanised hard chrome
coatings.
36

Stelzel, Wremer. Uber das Korrosionsverhalten von
Stahl in sulfidfreiem Beton. 26 p. 1963. Tech. Hochsch.,
Miinchen.
Dissertation: On the corrosion behavior of steel in sulphide
free concrete.
Wiederholt, Wilhelm. Die chemischc Oberflachenbchundlung
von Metallen zum Korrosionsschutz. 192
p. 1963. Leuze, Saulgau (Wiirtt), 16.50 DM.
Chemical surface treatment of metals as corrosion prevention.
Williams, A. C. Electro-slag refining and steel cleanness.
17 p. 1964. (BISRA Paper no. MG/A/74/64.)
Yamaoka, Hidcki, Einfluss von organischen Inhibitoren
auf die Suurekorrosion des Eisens. 82p. 1963.
Techn. Hochsch.. Karlsruhe.
Dissertation: Influence of organic inhibitors on acid corrosion
of irons.
FOUNDRY
Akimenko, Analolii Dmitricvich. Continuous casting
of steel. 77 p. 44 plates (1962) British Iron and Steel
Institute, London. 95s.
British Steel Castings Research Association. Recommended
procedure for the ultrasonic examination of
steel castings, vi, 49 p. 1964. The Assn., Sheffield. 30s.
Caine, John B. Design of ferrous castings. 123 p.
1963. American Foundrvmcn's Society, Des Plaines, 111.
$6.25. (Members $4.75.)
Chalmers, Bruce. Principles of solidification, xv,
319 p. 1964. Wiley, N. Y. $13.
Commission Nationale de la Formation Professionnelle
du Syndicate General des Fondeurs de France.
37

Technologie de la Fonderie en Moules Metalliques.
137, 5 p. 1962. Editions Techniques des Industries de
la Fonderie.
Technology of founding metal molds.
Council of Ironfoundry Associations. Guide to safe
working practices in iron foundries, x, 84 p. 1964. The
Assn., London. 15s.
Flemings, Merton C, Microsegregation in castings
and ingots. 12 p. 1964. American Fdym's Soc, Des
Plaincs, 111. $1.50 (Members $1.)
Krekeler, K. A. Feinguss. Verfahren. Wirtschaflichkeit.
Werkstoffe. 123 p. 1963. Dt. Verlagsanst, Stuttgart,
14 DM.
Fine castings. Processes. Economy, Materials.
Lubalin, Irwin. Shaw process cast dies. 20 p. 1964.
ASTME, Detroit.
Probst, A. E., and others, eds. Perspccktivyrazvitia
vyplavki chuguna v elektricheskikh pechakh na vostoke
SSSR. (Vostochnaia Sibir' i Dal'niiVostok) 151 p.
195S. $5.
Perspectives of development of smelting of cast iron in
electrical hearths in the East of the USSR. (Eastern Siberia
and Far East.)
Steel Castings Development Comm. Hardenabihty
of steel castings. 10 p. 1964. The Comm., Sheffield.
(Data sheet no. 10.)
Modulas of elasticity of steel castings. 4 p. 1964.
(Data sheet no. 11.)
Wastschenko, K. J., and Sofront, L. Magncsiumbehandeltes
Gusseisen. 456 p. 1960. VEB Verlag Deutscher
Verlag fiir Grundstoffindustrie, Leipzig. 35 DM.
Magnesium-treated cast iron. Tr. from the Russian.
38

UNITED STATES GOVERNMENT PUBUCATIONS
AD-240855: Behavior and design of deep structural
members. Pt.6: The yield strength of intermediate
grade reinforcing bars under rapid loading, by W. A.
Keenan and A. Feldman. 107p. 1960 (1964) OTS.
$9.10 (AFSWC-T-R-59-72P6; PB-166057)
AD-278175: Influence of alloying elements on the
continuous cooling transformation and weldability of
binary and ternary alloys or iron, Pt.l. Final tech.
rpt., 1 March 61-28 Feb. 62. 34p. 1962 OTS. $3.60.
AD-286595: Pt.4: Study of the influence of technological
factors on the pressability of iron powders, by
I. M. Fedorchenko and N. A. Filatova. (19)p. 1962.'
AD-28S767: Study of anion exchange separations of
metals with tartaric acid, by Gerald F. Pitstick. 93p.
1962.
Thesis includes Fe'\
AD-290278: Investigation of the crack-propagation
resistance of high-strength alloys and heat-resistant
alloys. Summary Tech. Report, December 23, 1960-
October 23, 1962 by J. D. Morrison and others. 107p.
1962. OTS $2.50.
AD-292207: Installation for removing sinter from
the surface of a steel hot-rolled band with abrasive
material, by V. A. Kolenko and others. 5p. 1962.
(FTD-TT-62-1291/1+2)
AD-294517: Problems in metallurgy and physics of
metals, by V.A. U'ina and others. I63p. 1962. (FTD-
TT-62-1290/142&4)
Pt. 2: Brittleness in steel in low-temperature tempering,
by V. I. Sarrak and R. I. Entin.
39
Pt. 3: Electron microscope fractographic study of

the micro-mechanism of the failure of the process in
steel and iron, by L. C. Orlov and L. M. Utevskiy.
Pt. 4: Investigating austenitic transformation in the
middle region directly at the transformation temperatures,
by L. I. Kogan and R. I. Entin.
Pt. 5: Some features of reverse martensitic transformation,
by Ya. M. Golovchiner. (32)p. 1962.
AD-295475: Vapor plating of aluminum on steel
by Jesse J. Crosby, v, 21p. 1962. OTS $.75 (ASD-
TDR62-907.)
AD-295519: Investigation of hydrogen embrittlemcnt
of hard high chromium alloy plated 4340 steel.
Final report, by J. krieg. 22p. 1963 OTS $2.60.
AD-296222: Research on the freezing and melting
points of iron alloys. Tech. Rept., by \V. Hume-Rothery.
27p. 1962 (1964) (ARL-63-11).
AD-400501: Kinetic and geometric characteristics of
martcnsite conversion in an iron-nickel-manganic al
loy, by M. Ye. Blanter and P. V. Novichkov. 14p. 1963
(FTD-TT-62-1760/14-2).
AD-401559: Identification and investigation of heat
resistant alloys on a Fe-Ni-Cr base, by M. V. Prid
antsev and others. 54p. 1963. (FTD-TT-63-12/1+2)
AD-405694: New method of improving the machin
ability of cast steel, by S. V. Lominskiy. Sp. 1963
(FTD-TT-63-352/14-2-M).
AD-40994S: Stainless scale, acid and heat-resistant
steels and alloys, by Yu. P. Davydov and G. V. Pokrovskiy.
19p. 1963. (FTD-TT-63-353/1+2+4).
AD-416723: Research and development on the effects
of high pressure on various elements and binary
40

alloys. Pt. II. Effects of pressure on transformation in
iron and iron alloys. Report for 1 April 61-1 April 62,
by W. F. Claussen. 32p. 1963. OTS. SI. (ASDTDR 62
479. pt. 2.)
AD-417179: On the magnetic properties of piezoelectric
gallium-iron oxide, bv Charles H. Nowlin. lv.,
1962. OTS $17. (AFCRL 63 303.)
AD-417237: Embrittlement of metals by organic
liquids. Quarterly report no. 3, (1 June-31 August 63)
12p. 1963. OTS $1.60.
AD-417623: Stress-corrosion cracking of highstrength
alloys. Final report. 1 July 62-1 June 63, by
R. B. Setterlund. 27p. 1963. OTS. $2.
AD-41S403: Neutron and gamma-ray heating in
iron slabs. Nuclear pulse propulsion concept, by
Arthur Reetz. 57p. 1962 (1964) OTS $6.60 (GAMD-
3690).
AD-41S633: Determination of 30,000 hour creep
data on structural sheet materials. Progress report no.
5, 1 October 62-31 January 63, by W. F. Carcw and
C. F. Kinkel. 9p. 1963. OTS $1.10.
AD-41S6S1: Investigation of the crack-propagation
resistance of high-strength alloys and heat-resistant
alloys. Bi-monthly progress report no. 7, 23 December
61-23 February 62, by W. R. Salzman and J. D. Morrison,
2p. 1962 (1964) OTS $1.10.
AD-41S729: Strain hardening and ausforming in an
iron-nickel alloy. Final technical report 1 December
59-31 January 63, by Morris Cohen and Jack Taranto.
40p. 1963. OTS $1.25. (ARL-63-124).
AD-419216: Magnetic properties of a series of
nickel-copper-iron alloys, by George L. Rosenhauer.
74p. 1963. OTS $8.10. (GAE-PHYS/63-1.)
•il

AD-419518: Critical industry repair analysis: steel.
Final rpt. by Oiaf H. Femald and Randle H. Powley,
ed. 249p. (1964) OTS. $11.
AD-419617: Study of brittle fracture initiation in
mild steel. Technical report, by F. W. Barton and W.
J. Hall. 30p. 1963. OTS. $1.
AD-420225: Submicron particle magnets of iron and
cobalt. Final rpt., by H. M. Fulton. 47p. 1963. OTS.
$1.25. (ASD-TRD-63-423).
AD-420234: Surface investigations on permanent
magnets. Final rpt. on applied research in electrical,
electronic and magnetic materials, by K. J. Kronenberg
and R. E. Quear. 29p. 1963. OTS. $.75. (ASD-TDR-63-
424).
AD-422382: Micro-x-ray diffraction of whiskers. Fi
al rpt. 1 Feb. 1962-1 Feb. 1963, by Werner R. Rambauske
and Ronald R. Grucnzel. 35p. 1963. (ASD-
TDR-63-643).
AD-422646: Stochastic estimates of the penetration
of gamma rays through slab shields, bv A. G. Pieper
and L. A. Beach. 32p. 1963. OTS. $3.60. (NRL-5981).
AD-423251: Experimental heat treatment of M-60
machine gun bolts, by P. E. Goettsch. 25p. 1963. OTS.
$.75.
AD-4233S7: Stress corrosion cracking in high
strength ferrous alloys, by J. F. Hildebrand and others.
46p. 1963. OTS. $1.25. (FZM-2690).
AD-423529: Elevated temperature fatigue properties
of D6AC high strength steel. Rpt. for Jan. 60-
Apr. 63 on materials application, by Sidnev O. Davis.
31p. 1963. OTS. $1. (ASD-TDR-63-645). "

AD-423682: Heat resistant conversion coatings for
steel. Interim Tech. Rept., by Linden H. Wagner. 13p.
1963. OTS. $.50. (Report 63-3345).
AD-425124: Problem of hydrogen in steel by A. R.
Elsea and E. E. Fletcher. 38p. 1963. OTS. $1. (DMIC-
Memo-180).
AD-425125: Report on the third maraging steel project
review by A. M. Hall and others. 59p. 1963. OTS.
$1.50. (DMIC-Memo-181).
AD-425593: Development of high strength elevatedtemperature,
corrosion-resistant steel, by A. Kasak and
others. 115p. 1963. OTS. (ASD-TDR-63-766).
AD-425714: Current status of the welding of maraging
steels, by R. E. Monroe. 32p. 1963. OTS. $1.
(DMIC-Memo-182).
AD-425948: Hot-cold working of steel to improve
strength by Charles W. Marschall. 76p. 1963. OTS. $2.
(DMIC-Hpt. 192).
AD-426299: Maraging steel project review (no. 3)
held 24-25 July 63. Rept. on materials application, by
R. M. Dunco and E. A. Janning. 584p. 1963. OTS. $7.
(RTD-TDR-63-4048).
AD-426698: Field ion microscopy of iron whiskers.
Final report. 1 June 62-30 June 63, by Erwin F. Muller
and Osamu Nichikawa. 21p. 1963. OTS. $.75.
AD-426964: Embrittlement of metal by organic
liquids. Summary rpt. 1 Dec. 1962-30 Nov. 1963. 42p.
OTS. $1.25.
AD-428026: Investigation of the effects of solute
elements on the magnetoelastic damping and coercivity
in very pure iron. Summarv rpt. bv R. E. Maringer.
22p. 1964. OTS. $2.60.
43

AD-428131: Electron microscope investigation of
fatigue fractures in a high-strength sheet steel, by
E. P. Dahlberg. 12p. 1962. (1964) OTS. $1.60. (NRL-
MR-1281).
AD-42S132: Effect of test temperature upon the
topography of fracture surfaces of AMS 6434 sheet
steel specimens, by C. D. Beachem. 12p. 1962. (1964)
OTS. $1.60. (NRL-MR-1293).
AD-42S226: Effect of specimen size on the fatigue
crack-strength of cylindrical specimens of heat-treated
4340 steel, by E.' P. Klicr. 17p. 1963. OTS. $.50.
NRL-6012).
AD-42S299: Joining of steel and other wear-resistant
metals to aluminum alloys, by M. S. Orvsh and
others. 62p. 1963. OTS. $6.60. (AFA-M-64-S-1).
AD-428309: On the sign of the exchange integral
in transition metals, by R. J. Weiss. lOp. 1963. OTS.
$1.10. (AMRA-TR-63-29; MRL-14I).
AD-42S513: Laboratory investigation of the effect
of cathodic protection on the corrosion of the galvanized
coating on galvanized steel, by T. E. Backstrom.
7p. 1963. OTS. $1.60.
AD-429031: Design, fabrication and hydrotesting of
120-inch diameter pressure vessel using IS per cent
nickel maraging steel. Research contract status rpt.
no. 8, 10 Oct.-12 Nov. 1963, by L. Colbert. 67p. 1963.
OTS. $7.60.
AD-429137: Development of an Hy-130/150 weldment.
Qtly. prog. rpt. no. 2, 1 Oct.-31 Dec. 1963, bv L.
F. Porter and others. 26p. 1963. OTS. $3.60.
AD-429140: Effect of cold forming on the stressstrain
characteristics of Hy-8-steel plates. Progress
44

pt. by S. T. Rolfe and R. P. Haak. lv. 1964. OTS.
$5.60.
AD-429141: Exploratory studies of 18/210 ksi yield
strength maraging steels. Progress rpt. by A. J. Birkkand
others. 34p. 1964. OTS. $5.60.
AD-429296: Stress-corrosion cracking of highstrength
alloys. Qtly. rpt. no. 2. 1 Oct.-31 Dec. 1963. by
R. B. Setterlund. 17p. 1964. OTS. $2.60.
AD-429446: Effect of cold forming on the fatigue
properties of Hy-80 steel plates, by R. P. Haak and
S. T. Rolfc. lv. 1964. OTS. $3.60.
AD-429447: Production and properties of 5Ni-Cr-
Mo-V steel plates, bv S. J. Manganello and others, lv.
1964. OTS. $2.60.
AD-42944S: Proposed structural evaluation of Hy-
130/150 and Hy-180/210 steels and weldments. bv
S. T. Rolfe. 20p. 1964. OTS. $2.60.
AD-429S00: Low-stress brittle fracture in mild
steel. Special rpt., by R. Dechaene and others. ISp.
1963. OTS. $.75. (PB1S1547; SSC158).
AD-429911: Processing-hydrogen cmbrittlement of
cadmium plated, ARTC project 6-61. notch tensile
specimens-sustained load testing of, bv W. M. Pratt
and R. L. Jones, 19p. 1962. (1964) OTS. $.75.
AD-4300S2: Discussion of the physical metallurgy
of the 18 per cent nickel maraging steels, by A. M.
Hall. ISp. 1963. OTS. $.75.
AD-430353: Surface transformations in an impacted
steel rod, by R. D. Potter. 20p. 1963. OTS. $1.60.
45

AD-430911: Thermomechanical treatments applied
to ultrahigh-strength bainites. Progress rpt. no. 5, 15
Oct.-15 Dec. 1963. OTS. $2.60.
AD-431044: Effect of weld flaws on the fatigue behavior
of butt-welded joints in Hy-80 steel, by A. J.
Hartmann and others. 78p. 1963. OTS. $7.60.
AD 431127: Microyield study of dispersion strengthening
in speroidized steel at room temperature, by R.
Kossowsky and N. Brown. 33p. 1964. OTS. $3.60.
AD-431193: Kossel studies of iron whiskers. Rpt. for
15 May 62-14 Oct. 63, by William G. Morris and R.
E. Ogilvie. 33p. 1964. OTS. $1.
AD-431266: Investigation of the corrosion resistance
of aluminum-steel assemblies exposed to sea
water — Pt. HI: Evaluation of one-year samples.
Progress rpt. no. 21, by Thomas A. Lowe. 35p. 1963.
OTS. $3.60.
AD-431311: Effect of tempering on notch properties
of D6AC alloy steel sheet, bv Robert N. Katz. 17p.
1963. OTS. $.50. (AMRA-TR-63-35).
AD-431627: Iron plating: an annotated bibliography.
Comp. bv Jack B. Goldman. 95p. 1963. OTS.
$2.25.
AD-431759: Effect of processing history on fracture
of materials at high strength levels. Report for 1 May
62-1 Mav 63, by D. R. Poirier and others. 61p. 1963.
OTS. $6.60. (ASD-TRD 63-819, pt. 1).
AD-431897: Development of steel, weld metal, and
welding procedure capable of producing 150,000 psi
yield strength in heavy sections. Final rpt. 20 June
1960-30 June 1962, by J. Heuschkel and others. (1964)
OTS. $22.25.
46

AD-431969: Deformation processing of anisotropic
metals. Progress rpt. no. 3. 1 Nov.-31 Dec. 1963, by
D. H. Avery and W. A. Backofen. 3p. 1964. OTS. $1.10.
AD-431971: Use of x-rays in the investigation of
materials. 236p. 1964. OTS. $15.50. (FTD-TT-63-671).
AD-432317: Metallurgical characteristics of high
strength structural materials. Qtly. prog. qit. no. 3,
by P. P. Puzak and others. 55p.' 1964. OTS. $1.50.
(NRL-6086).
AD-432390: Variation of lateral contraction ratio
of low-carbon steel at elevated temperatures, by P. S.
Theocaris and E. Koroveos. 34p. 1964. OTS. $3.60.
AD-432476: Investigation of stress-corrosion crack
ing of high strength steels. Informal mo. progress rpt..
no. 29, by W. L. Bruckart. 15p. 1964. OTS. $1.60.
AD-432842: On the mechanism of strengthening in
maraging steels, by II. Conrad. 8p. 1964. OTS. $1.10.
(SSD-TDR-64-13).
AD-432969: Diffusion in B.C.C metals, by R. A.
Wolfe and H. W. Paxton. 26p. 1964. OTS. $2.60.
AD-432998: Investigation of solidification of high
strength steel castings. Interim summary rpt. (1963)
OTS. $6.60.
AD-432999: Interim summarv rpt. 9 Dec. 61-8 Dec.
62. 51p. 1963. OTS. $5.60.
AD-433286: Influence of environment on crack propagation
and delayed failures in high-strength steels.
Rpt. for Dec. 62-Nov. 63, by G. L. Hanna and E. A.
Steigerwald. 52p. 1964. OTS. $5.60. (RTD-TDR-63-
4225).
47

AD-433583: Creep of steel of various alloying degrees,
bv M. P. Braun and B. B. Vinokur. 6p. 1964.
OTS. $1.10. (FTD-TT-64-48/1TZ).
AD-43365S: Some gamma-ray shielding properties
of finite steel slabs, by G. E. Langer and B. W. Shumway.
48p. 1964. OTS. $4.60. (USNRDL-TR-707).
AD-433S49: Barkliausen effect in irradiated pure
iron and nickel. Final rpt. by S. I. Taimuty and J. B.
Swedlund. 44p. 1964. OTS. $4.60.
AD-433S95: Investigation of Hall effect devices for
flaw detection in metals, bv Harrv Sipler. 19p. 1964.
OTS. $1.60. (AFA-R-1710).
AD-434008: Influence of alloying elements on the
continuous cooling transformation and weldability of
binary and ternary alloys of iron. Final tech. rpt. 1
Dec. 1962-28 Feb. 1963. by F. Watkinson and R. C.
Baker, 62p. 1963. OTS. $6.60.
AD-434230: Dissolution rates of zone refined iron
and steel in HO, H1SO4 and NaCI aqueous solutions,
by M. E. Straumanis and others. 27p. 1964. OTS. $2.60.
AD-434247: Investigation of stress corrosion cracking
of high strength steels. Informal mo. prog. rpt.
no. 13 for Feb. 64. by R. B. Setterlund. 6p. 1964. OTS.
$1.10.
AD-434271: Plastic design in high strength steel, by
Theodore V. Galambos and Maxwell G. Lay. 53p.
1964. OTS. $5.60.
AD-4343S3: Development of high integrity close
tolerance high strength aircraft qualitv steel castings.
Rpt. for May 61-May 63. by John B. Dabney and
Hugo R. Larson. 97p. 1964. OTS. $2.25. (ADD-TDR-
63-70S).

AD-434751: Diffusion in B.C.C. metals, by R. A.
Wolfe and H. W. Paxton. 26p. 1964. OTS. $2.60.
AD-434939: Study of influence of refractory elements
on the self-diffusion of iron with the help of
radio-active isotopes, by S. Z. Bolshteyn and others.
19p. 1963. OTS. $1.60. (FTD-MT-63-40/1+2).
AD-4349S7: Some observations on the electronmicroscopic
fractography of embrittled steels, bv W.
R. Warke. 12p. 1961. OTS. $.50.
AD-435779: Study on yielding of iron, by Eun U.
Lee. 122p. 1964. OTS. $10.10. Doctoral Thesis.
AD-4357S0: Megacycle damping and the elastic
stiffness coefficients of single crystal and polycrystalline
Armco iron from room temperature to 400 c. by
Arthur E. Lord, Jr. 147p. 1964. OTS. $11. Doctoral
Thesis.
AD-436804: Yielding in polycrystalline metals, by
William Rostoker. 36p. 1963. OTS. $3.60. (ARL-63-
245).
AD-43724S: Material-AMS6434 steel, 1S0-210 KSI
and heat treat weld repair - fatigue test of. Test rpt. 3
Nov. 60-1 June 62, by S. V. Clorioso. 27p. 1964. OTS.
$2.60 (FGT-2956).
AD-437250: Plane strain fracture toughness of large
D6ac steel specimens, by R. J. Urban. 27p. 1964. OTS.
$2.60 (FTG3064).
AD-437579: Transformations in iron ruthenium alloys
under high pressure, by L. D. Blackburn and
others. 39p. 1964. OTS. $3.60.
AD-437SS1: Material evaluation of H-ll high
strength steel for F-III, by W. M. Pratt. 27p. 1964.
OTS. $2.60. (FTDM-3177).
49

AD-437885: Material-evaluation - Charpy impact
strength D6AC and 4330-V steel allov. 4p. 1964. OTS.
$1.10. (FTDM-3135).
AD-4378S7: Plane strain fracture toughness of larg
D6AC steel specimens heat treated to 220-240 and
260-280 ksi strength level, lip. 1964. OTS. $1.60.
(FTDM-3178).
AD-437965: Stress-corrosion cracking of highstrength
alloys. Qtly. Prog. rpt. no. 12, 1 Jan.-31
March 64, by R. B. Setterlund. 2Sp. 1964. OTS. $2.60.
AD-43S140: Material evaluation-fatigue SAE-4330-Y
modified steel allov, by M. Sargent. 7p. 1964.
(FTDM-3157).
AD-43S142: Mechanical properties of 17-4 PH steel,
homogenized vs: as received condition, by M. R. Sargent.
Sp. 1964. OTS. $1.10. (FTDM-3226).
AD-43S432: Cracking in high-strength steel weldments
— a critical review, by P. A. Kammer and
others. 117p. 1964. OTS. $2.75. (DMIC-197).
AD-43S779: Material evaluation of D6AC steel
extrusion-mechanical and metallurgical properties of,
by W. M. Pratt. 15p. 1964. OTS. $1.60.
AD-43S989: MateriaIs-4340 steel-stress corrosion
and effects of banding-literature survey. Pt. 11: Effects
of banding, by P. F. Ghena. 49p. 1964 (FGT-
2957-Pt. 2) (See AD-600034).
AD-439222: Comparison of the toughness characteristics
of D6 air and vacuum melt material, by Richard
C. Davis and William S. Crownovcr. 39p. 1964. OTS.
$3.60.
50

AD-439231: Thermomechanieal treatments applied
to ultrahigh-strength bainites. Final Tech. rpt., by D.
Kalish and S. A. Kulin. S9p. 1964. OTS. $8.10.
AD-439443: Nickel-iron permalloy films. An annotated
bibliography (1958-1963). comp. by Jack
B. Goldmann. 71p. 1963. OTS. $6.60. (SB-63-62).
AD-439842: Properties of ultra-highstrcngth bainitic
structures. Rpt. for 1 May 62-15 March 63, by
Charles R. Simcoe and John P. Sheehan. 36p. 1963.
OTS. $3.60. (ASD-TDR-63-458).
AD-441I10: Development of drilling, reaming and
tapping techniques on H-ll steel heat treated to 220-
240 ksi. Final rpt.. by I. A. D. Marco. 13p. 1964
(A732).
AD-60000S: Investigation of fracture toughness in
high strength alloys. Rpt. for 15 Aug. 62-15 Aug. 63,
by B. S. Lemcnt and others. 120p. 1964. OTS. $2.50.
AD-600034: Materials-4340 steel-stress corrosion
and effects of banding — literature survey. Pt. II: Effects
of banding, by P. F. Ghena. 49p. 1964. OTS.
$1.25. (Earlier entry under AD-438989).
AD-600150: Development and statistical analysis
evalution of melting and transverse properties of highstrength
(H-ll type) steel. Interim eng. rpt. no. 6. 1
Jan.-l May 64, by Jack A. Yoblin and Robert F. Zuchlke.
39p. 1964. OTS. $1. (ASD-TR7-678-V6).
AD-600188: Notch toughness of three low-alloy
steels at elevated temperatures, by George Sandoz. 11
p. 1964. OTS. $.50. (NRL-MR-1523).
AD-600375: Investigation of low-cycle fatigue failures
using applied fracture mechanics. Tech. documentary
rpt. 15 Feb. 63-15 Feb. 64. by C. F. Tiffany
51

and P. M. Lorenz. 106p. 1964. OTS. $2.50. (ML-
TDR-64-53).
AD-600404: Mechanical properties of cold-drawn
martensitic SAE 4310 sled rod. Tech. rpt.. bv Eugene
Di Cesare. 34p. 1964. OTS. SI. (AMRA-TR-6402).
AD-600515: Micromechanisms of cleavage fracture
in polycrystalline iron. Sixth prog, rpt., by Charles
J. McMahon. Jr. 62p. 1964. OTS. $1.75. (SSC-161).
AD-600563; Electrochemical behavior of Armco
iron in sulfuric acid. Tech. note, by Howard A. Porte
and Thomas E. Nappier. 26p. 1964. OTS. $.75.
(NCEL-N568).
AD-600579: Strengthening iron-base alloys by shock
waves. Qtly. prog. rpt. 16 Jan.-15April 1964, by B. C.
Koepke and R. P. Jewett. 77p. 1964. OTS. $2.
AD-600695: Embrittlement of metals by organic
liquids. Qtly. rpt. 1 March-31 May 64. by W. Rostoker.
15p. 1964. OTS. $.50.
AD-600727: Evaluation of air melted and vacuum
melted AISI 4340 steel by William H. Golding. 62p.
1964. OTS. $1.75. (NAEC-AML-1947).
AD-600790: Effect of cobalt on the strength and
toughness of Ni-Cr-Mo high-yield-strength steels.
Tech. rpt.. by A. J. Birkle and L. F. Porter. 33p. 1964.
OTS. $3.60.
AD-6000791: Preliminary evaluation of rapid heat
treatment. Tech. rpt., by R. P. Haak, 28p. 1964. OTS.
$2.60.
AD-600792: Feasibility of developing an HY-1S0/
210 weldmcnt. Qtly. Prog. rpt. no. 3, by L. F. Porter
and others. 46p. 1964. OTS. $4.60.
52

AD-600793: Base metal evaluation of a production
electric furnace heat of 5Ni-Cr-Mo-V steel. Tech. rpt.,
by S. J. Manganello and others. 41p. 1964. OTS. $4.60.
AD-600795: Drop-weight tests of experimental Hy-
130/150 steels. Tech, rpt., by S. T. Rolfe. 37p. 1964.
OTS. $3.60.
AD-600846: Influence of section size on the mechanical
properties and fracture toughness of 7075-T6
aluminum, 6Ai-6V-2Sn titanium and AISI 4340 steel,
by Thomas S. DeSisto and others. 18p. 1964. OTS.
$.50.
AD-600S99: Investigation of stress corrosion crack
ing of high strength steels. Informal mo. rpt. for April
64, by S. Brelant. 6p. 1964. OTS. $.50.
AD-600932: Effect of special additions on the notc
toughness of maraging steels. Tech. rpt., by A. J. Birkle
and others. 25p. 1964. OTS. $2.60.
AD-600933: Effects of composition on the transformation
characteristics and toughness of weld-heataffectcd
zones in Ni-Cr-Mo steels. Tech. rpt.. by L. P.
Conner and others. 36p. 1964. OTS. $3.60.
AD-600934: Evaluation of 3 Ni-Cr-Mo steels. Tech.
rpt.. by S. J. Manganello and L. F. Porter. 31p. 1964.
OTS. $3.60.
AD-600935: Preliminary explosion-bulge tests of
experimental Hy-130/150 weldments. Tech. rpt., by
J. H. Gross. 28p. 1964. OTS. $2.60.
AD-600936: Welding characteristics of 12 Ni-5 Cr-
3Mo maraging steel-L Technical rpt., by L. P. Connor
and A. M. Rathbone. 21p. 1964. OTS. $2.60.
53

AD-600937: Welding characteristics of maraging
steels. II. Tech. rpt. by D. S. Dabkowski and A. M.
Rathbone. 22p. 1964. OTS. $2.60.
AD-601116: Hydrogen-induced, delayed, brittle
failures of high-strength steels, by A. R. Elsea and
E. E. Fletcher. 162p. 1964. OTS. $3. (D MIC-196).
AD-601188: Low-cycle fatigue characteristics of
ultra-high-strength steels, by C. M. Carman and J.
II. Mulherin. 55p. 1964. OTS. $1.50. (AFA-R-1707).
AD-601202: Mossbauer quadruple resonance in Fe57
single crystals. Tech. rpt. no. 4, by Peter S. Zory, Jr.
78p. 1964. OTS. $2.
AD-601304: Sprayed metallic coatings for ferrous
metals, an introductory bibliography, comp. by Richard
W. H. Lee. lip. 1962. OTS. $1.60. (PDC-S-62-
013; PDL-43216).
AD-601389: Effects of high-pressure high-temperature
hydrogen on steel, by E. E. Fletcher and A. R.
Elsea. 76p. 1964. OTS. $2. (DMIC-202).
AD-601446: Evaluation of high strength steel forgings.
Rpt. for Jan. 62-Jan. 63, bv R. L. Jones and
F. C. Nordquist. 155p. 1964. OTS. S3. (RTD-TDR-63-
4050).
AD-601625: Evidence against a weak coupling model
for Fe (57), by C. S. Cook. lOp. 1964. OTS. $.50.
(NRDL-TR-742).
AD-601823: Vacuum degassing in the production of
premium-quality steels, by P. J. O'Reilly. 125p. 1964.
OTS. $2.75 (DMIC no. 200)
AD-602051: Tensile strengths of steel connections
having transverse and longitudinal fillet welds. Final
5J

pt. for 1 July 61-30 June 62, bv Olin S. Lord and
F. W. Schutz, Jr. 61p. 1963. OTS. $6.60.
AD-602075: Factors influening the fatigue life of
an Hy-80 composition steel fully quenched and tempered
to various strength levels. Progress rpt., by A. R.
Willner and M. L. Saline. 31p. 1964. OTS. $1.
(DTMB-1807).
AD-602137: On the influence of small amounts of
impurities on recrystallization and grain growth of
high purity iron. Note III: Effect of boron on recrystallization
and effect of impurities on normal and anomalous
grain growth. Final tech. rpt., for 1 Oct. 62-
29 Feb. 64. by G. Venturello and others. 97p. 1964.
OTS. $2.25.
AD-602203: Long-term rupture strength of alloys
and plastics from tensile strength at elevated temperatures.
Tech. rpt.. by S. Goldfein. 34p. 1964. OTS.
$1. (AERDL-1773-TR).
AD-602299: Effect of fluid environment on torsiona
fatigue failure. Prog. rpt. no. L 1 March-31 May 64. by
M. J. Hordon and P. F. Weihrauch. 46p. 1964. (OTS.
$1.25).
A/CONF.2S/P/157: Corrosion behavior of steels in
COr/CO atmospheres, by J. E. Antill and others. 15p.
1964. OTS. $.50.
AE-13S: Radiation-induced precipitation in iron,
by B. Solly. 9p. 1964.
AEC-tr-5195: Oxidation of ordinary or alloyed
steels heated in carbonic gas under pressure, by D.
Leclercq and others. 43p. 1960 (1962) OTS. or JCL.
Ph $4.60, Mf $1.49.
55

AEC-tr-6389: Study of caustic embrittlement of
boiler plates, by G. T. Athavale and W. Eilender. 3p.
1940 (1964) JCL. Ph. $1.10, Mf. $0.80.
AEC-tr-6394: Resistance of mild steel to stress co
rosion with respect to aging, heat treating, and aluminum
content, by Von Franz Nehl and Walter Werner.
4p. 1939 (1964) JCL. Ph. $1.10, Mf. $0.80.
AERE-R-4507: Magnetic field dependence of spin
wave specific heats at low temperatures, by M. W.
Stringfellow. 6p. 1964. BIS. $0.30.
AFCRL-63-824: Research on meteoric dust fall out.
Annual summary rpt. no. 1, May 1, 1962-April 30. 1963,
by E. A. Kreiken. 13p. 1963.
AGARD-465: Experimental investigation of turbulence-excited
panel vibration and noise (boundarylayer
noise), by M. Y. elBaroudi and others. 40p. 1963.
Study was made on steel panels.
AMC-Translation 1-63: Determination of iron in
aluminate solutions by a polarographic method, by
N. A. Suvorovskaya. 6p. 1963.
ASD-TDR-63-423: Submieron particle magnets of
iron and cobalt, by H. M. Fulton. 39p. 1963. OTS.
$4.60.
ATL-A-139: Investigation of thermal-stress-fatigue
behavior of stainless steels. Quarterly progress rpt. no.
7, July-September 1963, by K. E. Horton. 29p. 1963.
ATL-A-142: Investigation of thermal-stress -fatigu
behavior of stainless steels. Qtly. prog. rpt. no. 9, Jan.-
March 1964, bv K. E. Horton and J. M. Hallander. 27p.
1964. OTS. Ph. S2.60, Mf. $1.01.
96

AWRE-0-49/63: Permeation and diffusion of hydrogen
isotopes in nilo-K, by P.M.S. Jones and others.
24p. 1963.
BNL-6249: Mechanical properties of irradiated iron
and iron alloys, by J. C. Y. Chow and others. 56p.
1962. OTS. $5.60.
BNL-8015: Low-temperature embrittlement of iron,
iron alloys and steels by neutron irradiations, by J.
G. Y. Chow and C. B. McRickard. 28p. 1964. OTS. Ph.
$2.60, Mf. $1.04.
CEA-Bib-39: Les aciers de caissons et da cuves de
reacteurs de puissance, bv Marcel Jean. 31p. 1963.
OTS.
Steels used for power reactor pressure vessels.
CEA-tr-X-537: Methode de combustion-titrimetrique
de dosage rapide des traces de carbone dans
l'uranium metalliquc, dans le titane et dans Ics fonteset-aciers,
by I. Fujishima and T. Takcuchi. 24p. 1961
(1964) JCL. Ph. $1.10, Mf. $0.80.
Combustion-titrimetric method for rapid determination of
traces of carbon in metallic uranium, titanium and in irons and
steels.
CONF-48-6: Application of classical analytical
methods to refractory metals, by J. D. Golland. 22p.
1964. ORINS.
Includes standard methods for the determination of Fe and
its alloys.
CONF-32S-3: Mossbauer effect in iron-57, by King
Foo Suen. 61p. 1963. Auburn University, Alabama.
Thesis.
CONF-342-13: Critical magnetic scattering of neutrons
in iron, by L. Passell. 9p. 1962. ORINS, Gmelin.
CONF-524-5: Effect of twinning on the yield stress
of polycrystalline iron at low temperatures, by S. B.
57

McRickard and J.G.Y. Chow. 12p. (1964) OTS. Ph.
$1.60, Mf. $0.80.
CONF-540-2: Metallurgical bonding of dissimilar
metals by coextrusion, by Paul Lowenstein and Wilson
B. Tuffin. 17p. 1964. A.S.M. Western Metal and Tool
Conference, Los Angeles. $3. (Tech. rpt. no. W4-3.2).
DMI-Memo-lS3: Current status and 1970 potential
of selected defense metals. 45p. 1963. (AD-425604)
OTS. $1.25.
DMIC-192: Hot-cold working of steel to improve
strength, by Charles W. Marschall. 70p. 1963.
DMIC-19S: Mechanical propreties of the 18 per cent
nickel maraging steels, by J. E. Campbell and others.
64, (53)p. 1964.
DMIC-199: Appliction of high pressure in metal
deformation processing. 50,2.14p. 1964.
DMIC-207: Current methods of fracture-toughness
testing of high-strength alloys with emphasis on plane
strain, by J. E. Campbell, xii, 19p. 1964.
DMIC-208: Metal deformation processing, vol. I:
Survey conducted as part of the metalworking process
and equipment program, by F. W. Boulger and
others, (iii) 126p. 1964.
DMIC-Memo-166: Literature survey on the effect
of sonic and ultrasonic vibrations in controlling grain
size during solidification of steel ingots weldments, by
J. G. Kura and II .W. Mishler. 35p. 1963. OTS. $3.60.
(AD-41538).
DP-878: Mossbauer effect in ferredoxin, by William
L. Pillinger and John A. Stone. 17p. 1964. OTS. S0.50.
58

EURAEC-2S5: Corrosion problems. Final report
(Draft) 103p. (1961) OTS. Ph. $9.10, Mf. $3.29.
EURAEC-432: Study of the properties of low-car
bon martensites. Special rpt. no. 6, April 1-June 30
1962. 80p. (1964) OTS. Ph. $760, Mf. $2.60.
EURAEC-598: Study of gamma grain growth in
terms of the time and the temperature. Special rpt
no. 9, July 1-Sept. 30, 1962. 73p. (1963) OTS. Ph
$7.60, Mf. $2.39.
Studies made on austentic steel.
EURAEC-613: Development of a new determination
of the ductile brittle transition temperature. Qtly. rpt.
Jan.-March 1963, by H. C. Van Elst. lOlp. 1963. OTS.
Ph. $9.10, Mf. $3.23.
Includes: Intermittent propagation of brittle fracture in
steel.
EURAEC-663: Non -destructive examination of
welds. Qtly. rpt. no. 7, Jan. 1-March 31, 1963. 19p.
1964. OTS. $1.
EURAEC-675: On the behavior of alloy steels in
chloride solutions. I. Influence of chloride and oxidizing
agents in the presence of bicarbonate. 71p. 1962
(1964) OTS. $7.60.
EURAEC-676: On the behaviour of steel alloys in
sodium chloride. II. Influence of sodium bicarbonates
and sulphates at 20 deg. C, by J. Klimzak-Mathiew
and others. 24p. 1962 (1964) OTS. $2.60.
EURAEC-677: Behavior of steel alloys in sodium
chloride solutions. III. Influence of temperature on
"rupture" and "protection" potentials of steels and
on sodium chloride concentrations for "rupture" and
"protection" (sodium-bicarbonate solutions). Special
tech. rpt. 32p. 1962 (1964) OTS. S3.60.
59

EURAEC-729: Fundamental study on some forms
of embrittlement affecting welded joints in high
tensile steel. Qtly. rpt. no. 6, April 1-June 30, 1963.
31p. 1963. OTS. Ph. $3.60, Mf. $1.13.
EURAEC-762: Non-destructive weld examination.
Qtly. rpt. no. 8, April 1-June 30, 1963. 22p. 1964. OTS.
$1.
EURAEC-787: Welding of very thick steel. Qdy.
rpt. no. 7, April 1-June 30, 1963. 144p. 1963. OTS.
Ph. $11.. Mf. $4.52.
EURAEC-799: Study of transformation point variation.
Influnce of alloy elements and impurities on
the start of the gamma-alpha transformation. Tech.
rpt. no. 18-March-Junc 30, 1963. lOp. 1963. OTS. Ph.
$1.10, Mf. $0.S0.
EURAEC-S11: Welding of very thick steels. Qtly.
rpt. no. 8, July 1-Sept. 1963. 183p. 1963. OTS. Ph.
$13., Mf. $5.69.
EURAEC-813: Second report of conclusions and
hypo-theses. General outline of the results obtained
from September 1, 1962-Aug. 31, 1963 and the arrangements
made for executing global bend tests.
Special rpt. no. 6. 58p. 1963. OTS. Ph. $5.60, Mf. $1.94.
EURAEC-816: Reactor casing steels, Irradiation of
steel specimens in E13 at different temperatures, and
post-irradiation test. Special rpt. no. 2, 1962. OTS.
Ph. $1.60, Mf. $0.80.
EURAEC-827: Development of a new determination
of ductile-brittle transition temperature. Qtly.
rpt. no. M63-1209-26150. July 1-Sept. 30, 1963, by H.
C. VanElst. 44p. 1963. OTS. Ph. $4.60, Mf. $1.52.

EURAEC-829: Basic study of a few embrittlement
forms affecting joints welded on high-resistance steel.
Qtly, rpt. no. 7, July 1-Sept. 30, 1963. 12p. 1963. OTS.
Ph. $1.60, Mf. $0.80.
EURAEC-841: Investigation of thermal-stress fatigue
behavior of stainless steels. Qtly. rpt. no. 7, July-
Sept. 1963, by K. E. Horton. 29p. 1963. OTS. Ph. $2.60,
Mf. $1.07. (ATL-A-139).
EURAEC-864: Studies of steel corrosion in hightemperature
water and steam. Qtlv. rpt. no. 5, July 1-
Scpt. 30, 1963. 87p. 1962. OTS. Ph. $8.10, Mf. S2.81.
EURAEC-913: Development of a new determination
of the ductile-brittle transition temperature. Qtly.
rpt. no. 9, Oct.-Dec. 1963, by H. C. vanElst. 40p.
1964. OTS. Ph. $3.60, Mf. $1.40.
EURAEC-915: Welding of very thick steels. Qtlv.
rpt. no. 9, Oct. 1-Dec. 31. 1963. 214p. (1964) OTS.
Ph. $14.50, Mf. $6.62.
EURAEC-946: Investigation of thennal-strcss-fatigue
behavior of stainless steels. Qtly. Progress rpt.
no. 8, by K. E. Horton. 32p. 1963. OTS. Ph. $3.60.
Mf. $1.16. (ATL-A-140).
EURAEC-960: Studies of steel corrosion in hightemperature
water and steam. Qtly, rpt. no. 6, Oct. 1-
Dec. 31, 1963. 70p. 1964. OTS. Ph. $6.60, Mf. $2.30.
EURAEC-977: Study of the martensite mesh parameter.
Special rpt. no. 16, Jan. 1-March 31, 1963. 2Sp.
1903.
EURAEC-1118: Influence of work hardening in the
vicinity of point AG and AG during welding cycles
(RPI machine) Special rpt. no. 22, Sept. 1-Dec. 31,
1963. 18p. 1964. OTS. $1.
61

EURAEC-1119: Relationships between the austenitization
conditions, austenitic grain and embrittlement
in quenched state. Special rpt. no. 23, Oct. 1-Dec. 31,
1963. 16p. 1964. OTS. $1.
GEAP-4313: Sodium mass transfer. VIII. Corrosion
of stainless steel in isothermal regions of a flowing
sodium system, by J. D. Mottley. 40p. 1964. OTS.
Ph. $3.60, Mf. $1.40.
HW-74884: Review of the fatigue sensitivity of
steels to notches and cracks and application to NPR
primary pipe, by W. J. Love. 51p. 1962 (1964) OTS.
Ph. $5.60, Mf. $1.73.
HW-75208: Specification for type AM-355 alloy, bv
T. T. Claudson. Sp. 1962. OTS. Ph. $1.10. Mf. $0.80.'
HW-76573: Summary report, longitudinal weld quality.
NPR primary loop piping. Append. VIII. Statistical
analysis of flaw frequency and size distribution
in NPR primary loop pipe longitudinal welds, by A.
D. Wiggins. ISp. 1963. OTS. Ph. $1.60, Mf. $0.80.
HW-7904S: Descaling of various iron and nickel
base alloys, by H. P. Maffei. 23p. 1963.
IS-835: Thermal conductivitv of silicon and iron
from 300 to 1400 deg. K., by A. H. Klein and others.
17p. 1963. OTS. Ph. $1.60. Mf. $0.80.
IS-929: Tensile test to find endurance limit of
strain-ageable metals, by Knud Pederson and Glenn
Murphy. ISp. 1964. OTS. $1.
KAPL-2000-21 (p.IV): Fatigue properties of weld
deposited Ni-Cr-Fe alloy 600 cladding, by G. J. Sokol
and others, p.1-10. (1964) OTS. $2.25.

KAPL-M-MSB-1: Construction of potential-pHdiagrams
for the nickel-water, chromium-water and
iron-water systems at 25 deg. C. ed. by M. S.
Bushey and C. F. Cheng. ISp. 1963. OTS. Ph. $1.60,
Mf. $0.80.
LADC-5909: Effect of strain aging on the dynamic
elastic-plastic properties of iron, by John W. Tavlor
and Eugene G. Zukas. 29p. 1963. OTS. $1.10.
LADC-6463: Localized moments of very dilute Fe
impurities in metals from Mossbauer effect studies over
the range 9.5 to 300 deg. K.. by R. D. Taylor and
others. 9p. 1964. OTS. $1.
LAMS-3053: Search for the Mossbauer resonance
of the 137 keV* ray of Fep by T. A. Kitchens and
others. 16p. 1964. OTS. $0.50.
MCW-1483: Investigations of some experimental
fuel element alloys with the electron microprobe, by
L. A. Fergason and others. 19p. 1964. OTS. $0.50.
MIT-1310-1: Mechanical properties of metals at
low-temperature. Annual prog, rpt., Oct. 1963 to present.
8p. 1964.
Includes effect of neutron irradiation on the mechanical properties
of iron crystals. OTS. $1.
MND-2531-1: Investigation of allotropic transformation
in metals. Final rpt., March 1, 1960-March 1,
1964, by Henry M. Otte. 95p. 1964. OTS. Ph. $8.60,
Mf. $3.05.
Particular attention is given to the martensite reaction in
steels.
MCR-451: Apparatus for the study of solid state
electrolysis in high-purity iron. Qtly. rpt. no. 7, Oct.
1-Dec. 31, 1963, by E. J. Hughes and others. 13p.
1964. OTS. Ph. $1.60, Mf. $0.80.

MSAR-63-161: Effect of high-temperature sodium
on austenitic and fcrritic steels. Physical properties
of metals. Rpt. no. 1. SOp. 1963. OTS. Ph. $7.60, Mf.
$2.60.
NAA-SR-7544: Development of ferritic steels for
high temperature sodium service (Pt. II), by W. J.
Anderson and others. 65p. 1963.
NAA-SR-S702: Compatibility of boron carbide with
potential AOMR control rod cladding materials, by
R. D. Hahn. 24p. 1964. OTS. $0.50.
NASA-SP-41: Liquid-metal corrosion as a solution
phenomenon, by John R. Weeks, p.21-6, 1964.
Effects of impurities, C. carbon, by Leo F. Epstei
p.61-5, 1964. OTS. $5.
NP-13261: Corrosion of uranium steels, by G. J.
Biefcr. (28)p. (1964).
NP-13501: Determination of microgram quantities
of certain heavy metals, by D. B. Adams. 16p. 1963.
NP-13629: Iron plating: an annotated bibliography,
comp. by Jack B. Coldmann. 94p. 1963. OTS. (SB-63-
55).
NP-14102: Effect of nuclear radiation on materials
at cryogenic temperatures. Qtly. prog. rpt. no. 13,
Jan.-March 1964. 50p. 1964.
NRL-6127: In-reactor studies of low-cycle fatigue
properties of a nuclear pressure vessel steel, by J. R.
Hawthorne and L. E. Steele. 18p. 1964. OTS. $0.50.
NRL-Memo-1502: Effects of neutron irradiation on
the properties of reactor structural materials, by L. E.
Steele and others. ISp. 1964. OTS. $1.
64

NYO-10721: Radioisotope shielding design manual.
by William H. Stcigelmann. 140p. 1963. OTS. $2.50.
ORNL-3488: Electrochemical kinetics and its application
to corrosion. (5)p. (1964) OTS. $2.75, (for
set).
ORNL-3600: Effects of hydrogen on the high-temperature
flow and fracture characteristics of metals,
by H. E. McCoy, Jr. 289p. 1964. OTS. $3.50.
ORNL-3619: Clad fuel development, by A. Goldman
and others, p.123-46 (1964) OTS. $5.
Includes thermal conductivity tests on Armco iron.
ORNL-P-149: Comparison of the thermal conductivity,
electrical resistivity and seeback coefficient of a
high-purity iron and Armco iron to 1000 deg. C, by
J. P. Moore and others. 20p. 1964. OTS. Ph. $1.60,
Mf. $0.80. Addendum to ORNL-3556.
ORNL-RMIC-2(p.lO-16): Preparation of high purity
single crystals from electron beam zone refined
iron, by E. J. Hughes and P. W. Barton. (1961)
ORNL. Gratis.
ORNL-TM-539: Survey of the corosion of martcnsitic
and ferritic stainless steels in pressurized water,
by R. J. Beaver and C. F. Leitten, Jr. 34p. 1963. OTS.
$3.60.
ORNL-TM-815: Post irradiation evaluation of stainless
steel-clad plate-type specimens containing 3 wt.
% enriched boron in iron, by A. E. Richt and others. 14
p. 1961. OTS. Ph. $1.60, Mf. $0.80.
PAN-485/I-A: A fast and convenient method of
measuring the thickness of thin coatings on steel
sheets, by Adam Jasinski and others. 9p. 1962. (1964).

RCN-26: Norwegian-Dutch steel irradiation programme,
by H. Skreppcn and others. 17p. 1964.
RIA-63-1651: Multimetal coating process for composite
steel, magnesium and aluminum structures,
Tech. rpt., by Jodie Doss. 17p. 1963.
RIA-63-1S36: Use of volatile corrosion inhibitors
with ferrous and nonferrous metal finishes, by Robert
E. Johnson. 4Sp. 1963.
RSIC-41: Survey of spectrophotometric determination
of iron by complexing with pyridine and phenanthroline
compounds, by William P. McNutt. 15p. 1963.
RTD-TDR-63-3041 (v.4): Evaluation of tunnel liners
in granite shot hardhat. operation nougat. Static
tension tests of lining materials and static test of 8
gage tunnel liner plate. Final rpt., by J. L. Merritt.
42p. 1964. (AD-433192) OTS. $4.60.
SC-T-64-903: Electrolytical polishing application in
metallographv, by A. L. deSy and H. Haemers. 21p.
1964. JCL. Ph. $2.60, Mf. $0.83.
Methods of polishing iron and steel are included.
SCDR-82-63: Sputtering of cadmium coatings on
steel, by D.M. Mattox and J. E. McDonald. 9p. 1963.
OTS. $1.10.
SC-TM-40-59(51): Preliminary experiments in the
response of particles to magnetic and electric fields, by
J. M. Lohse. 22p. 1959 (1964) OTS. Ph. $2.60. Mf.
$0.86.
SCTM-59-63(25): Stress detection by infrared inspection.
Experimental data rpt., by L. J. Klamerus
and J. C. Dresser. 60p. 1963. OTS. $5.60.
T-3S7-R: An iron meteorite shower, by I. S. Astapovich.
3p. 1964.

TID-18904: Systematica of Mossbauer isomer shifts
of iron-organic compounds, by R. H. Herber and
others. 32p. 1963. OTS. $3.60.
TID-1S99S: Metallography of uranium containing
small additions of iron, silicon, or aluminum, by C. L.
Angerman and M. R. Louthan, Jr. 13p. 1963. OTS.
$1.60.
T1D-20463: Further study of the weld heat-affected
zone in A-2I2-B steel. Combined final rpt., by Warren
F. Savage and Fred C. Breismeister. 90p. 1964. OTS.
Ph. $8.10. Mf. 2.90.
TRG-Inf-Ser-330: On boiler operation. Recent observations
and knowledge concerning the behavior of
ferritic and austenitic boiler steels. I. Class. Translated
by G. G. Kinnans. 22p. 1960. (tr. 1963).
TT-63-41029 (p.52-53): Problems of direct steel
production. 2p. 1963. OTS. $1.75. (JPRS-21643).
TT-64-21710: X-ray diffraction research. 69p. OTS.
$2.
UCRL-7286-T (pt.2): Ionization equilibrium at
high densities. II. Application to high Z material, by
Carl A. Rouse. 9p. 1963. OTS. Ph. $1.10, Mf. $0.S0.
Results are presented for iron covering a density range of
O.lg/cc to I0*g/cc.
UCRL-7304: Stress-strain distribution in lap-jointed
thin shells, by S. A. Forsberg and others. 35p. 1963.
OTS. Ph. $3.60, Mf. $1.25.
UCRL-10811: Real and ideal strengths of the common
structural metals, by Victor F. Zackav. 41p. 1963.
OTS. Ph. $4.60, Mf. $1.43.
UCRL-10S99: Effect of very high pressures on the
Mossbauer spectrum of Fe47 in iron metal (thesis).
67

y Malcolm Focrtner Nicol. 77p. 1963. OTS. Ph. $7.60,
Mf. $2.51.
UCRL-11073: Diffusion of iron into single-crystal
MgO, by Stuart L. Blank. 30p. 1963. OTS. $0.75.
Thesis.
USRL-11116: Diffusion of iron into sodium disilicate
glass, by Marcus P. Borom. 41p. 1963. OTS. $1.
UCRL-11143: Polarization of silver nuclei in fcrromagnets
and the internal magnetic field, by Gene A.
Westernbarger. 104p. 1963. OTS. $2.25.
WAPD-T-1622 (rev.): Neutron spectral effects on
interpretation of radiation damage exposure, by K.
Shure. 18p. 1963. OTS. Ph. $1.10, Mf. $0.80. (CONF-
187-48).
UNITED STATES AREA REDEVELOPMENT ADMINISTRATION
Feasibility of Krupp-Rcnn process for treating lean
iron ores of Mesabi Range, digest. 3, 27p. 1964. $0.15.
Preliminary engineering studies for application of
R-N process to Lake Superior region iron ores: sec.
1, Sampling iron ores for R-N process tests, by L. F.
Heising and R. C. Briggs; sec. 2, Preliminary R-N
commercial facility projection and technical report.
6. 102p. 1964.
Role of ARA technical Assistance in major iron ore
problems of redevelopment areas, prepared by Wilbur
G. Fritz. 8p. 1964.
UNITED STATES BUSINESS AND DEFENSE SERVICES
ADMINISTRATION
Economic report (Industry outlook series)
No. 63-64: Steel forging industry, reivew of 1963,
outlook for 1964. 4p. 1964.

No. 63-72: Iron and steel industry, review of 1963,
outlook for 1964. 5p. 1964.
UNITED STATES DEPARTMENT OF COMMERCE. OFFICE OF
TECHNICAL SERVICES
PB-163838: Gamma-ray-albedo from iron. Interim
rpt., by R. B. Theus and F. A. Beach. 9p. 156 (1964)
OTS. $1.10. (NRL rpt. no. 4701).
PB-163850: Influence of speed of deformation on
strength properties in the post-lower yield stress-strain
curve of mild steel. Progress rpt. no. 2, by J. M. Krafft
and A. M. Sullivan 23p. 1960. (1964) OTS. $2.60.
(AD-249356: SSC#-127).
PB-163541: Welding metallurgy of steels. Progress
rpt. no. 1, by F. A. Calvo and others. 174p. 1961
(1964) OTS. $12.50.
PB-165031: Study on possible methods for improving
forging and extruding processes for ferrous and
non-ferroues materials. Pt. V. Study of lubricants for
hot-extrusion operations. Final engineering summary
report, 10 April 1956-10 April 1957, by H. L. Shaw and
others. 85p. 1957 (1964) OTS. $8.10.
PB-1650S7: Ultrasonic nondestructive measurement
of case depth. Final rpt., by Andrew M. Murdoch and
Richard A. Wilson. 74p. 1957 (1964) OTS. $7.60.
(TR-077).
PB-165088: 16p. 1957 (1964) OTS. $1.60. (TR-076)
PB-171809-6: Cryogenic materials data handbook.
Progress rpt. no. 14, by F. R. Schwartzberg and others.
130p. 1964.
PB-181505: Low-cycle fatigue behavior of axially

loaded specimens of mild steel, by T. P. Yao and \V.
H. Munse. 74p. 1963. OTS.
OTS-63-41300: Electroslag remelting of heat-resistant
stainless steel, USSR, by G. A. Khazin and others.
2, 8p., 1963. OTS. $0.50. (JPRS-22149).
OTS-63-41309: Investment casting, USSR, by Ya. I.
Shklennik and others. 2, a, 33p. 1963. OTS. SI. (JPRS-
22175).
OTS-64-21047: Studies in casting, production and
refining of high-temperature alloys, USSR. 2, 34p.
1963. OTS. $1. (JPRS-22336).
OTS-64-21052: Typical casting shop, USSR, by L. G.
Frumin. 2, 19p. 1963. OTS. $0.50. (JPRS-22342).
OTS-64-21159: Intricate investment casting, USSR,
by V. M. Korolev and V. M. Stepanov. 2, a-c, 178p.
OTS. $3. (JPRS-22509).
OTS-64-21972: Continuous casting and open hearth
computer controls, USSR, by N. B. Ceyro. 2, a, 13p.
1964. $0.50. (JPRS-24017).
OTS-64-31492: Materials, technology and production
economy welding of austenitic heat resisting steels
and alloys used in building gas turbines, USSR, by
B. I. Medovar. 2, 15p. 1964. $0.50.
OTS-64-31512: Problems of investment and chill
casting. USSR. 2, a, 22p. 1964. $0.75.
OTS-64-3I51S: Special steels and alloys, USSR. 2,
a, 49p. 1964. $1.50.
JPRS-17616: Corrosion of reinforcement steel in
porous concrete, by P. Mclcnevska. 6p. 1963. OTS.
$0.50. (OTS-63-21125).
TO

JPRS-17790: Hot pressing technology in the Soviet
machine building and metallurgical industries, USSR,
by G. V. Samsonov and M.S. Koval'chenko. 319p.
196s. OTS. $5. (OTS-63-21192).
JPRS-18245: Isothermal sintering of metallic powders
under pressure, by M. Yu. Bal'shin and A. A. Trofimova.
17p. 1962. OTS. $0.50. (OTS-63-21371).
JPRS-18465: Metal powders and welding. 19p. 1963.
OTS. $0.50. (OTS-63-21465).
Pt. 1: Certain problems on the welding of metal
powders, by L. A. Mel'nikov.
Pt. 2: Powder-plate electrode for electroslag facing,
by A. Ya. Shartser and others.
JPRS-18490: Role of electron beam and electroslag
refining in special weldments, by Ye Paton and B. I.
Medovar. lip. 1963. OTS. $0.50. (OTS-63-21474).
JPRS-21760: Effect of electroslag remelting on
technical plasticity of iron-nickel-chromium base alloys,
USSR, by M. V. Pridantsev and others. 2, 9p.
1963. OTS. $0.50. (63-41080).
JPRS-21896: Steel welding and welding equipment,
USSR, by A. A. Astafyev and others. 2, a, 29p. 1963.
OTS. $1. (63-41152).
JPRS-21912: Steel production by electroslag remelting,
by G. A. Khasin and others. 21p. 1963. OTS. $0.50.
(OTS-63-41161).
JPRS-22217: Electroslag remelting, by B. I. Medovar
and others. 171p. 1963. OTS. $13. (OTS-63-41334).
JBRS-22247: Strength of powder-metal materials
and alloys at normal and high temperatures, by G. S.
71

Pisarenko and others. 320p. 1963. OTS. $5. (OTS-63-
41347).
JPRS-22306: X-ray diffraction analysis of the first order
residual stresses which appear during fine machining
of metals, by A. V. Poltaskiy and Yu. S. Terminazor
9p. 1962 OTS. $0.50. (OTS-64-21033).
JPRS-22390: New casting method for ball-bearing
steel, by G. N. Oyks and others. 118p. 1963. $250.
(OTS-64-21079).
JPRS-22594: On the subject of prospects for the
developemnt of continuous teeming of steel, by B. V.
Filier and others. lOp. 1964. OTS. $0.50. (OTS-64-
21202).
JPRS-24113: USSR industrial development: Soviet
ferrous metallurgy, no. 182, Importance of shop in
steel mill operation. 2, 5p. 1961. OTS. $0.50. (OTS-
64-31033).
JPRS-24383: Effect of carbon content on diffusion
of hydrogen in carbon steels, USSR, by G. I. Batalin
and A. L. Balyasnyy. 2. Sp. 1964. OTS. $0.50. (OTS-
64-31172).
U. S. GEOLOGICAL SURVEY
Bulletin
No. 110S-D: Geology of North Bradford River iron
prospect, southeastern Alaska, by E. M. MacKevett.
Jr. and M. C. Blake, Jr., iii, 21p. 1963. $.65.
U. S. BUREAU OF LABOR STATISTICS
Professional Papers
No. 407: Geology and ore deposits of Cuyuna North
Range, Minn., by Robert Gordon Schmidt, v, 96p.
1963. $4.25.

Bulletin
No. 1375-100: Employment outlook in iron and
steel industry. 3,llp. 1964. $0.10.
U. S. BUREAU OF MINES
Bulletins
No. 614: Kinetics of Fischer-Tropsch synthesis on
iron catalysts, by R. B. Anderson and others, iv, 45p.
1964. $0.35.
Includes appendix: Tests of iron catalysts at pressures up
to 103 atmospheres, by S. Friedman and M. D. Schlesinger.
Information Circulars
No. 8190: Reconnaissance of iron resources in New
Mexico, by C. M. Harrer and F. J. Kelly. 2. vii. 112p.
1963.
Minerol Industry Surveys
Iron and Steel in 1963, prepared by Robert A.
Whitman. 12p. 1964.
Minerals yearbook. Preprint 1963, v.l: Iron oxide
pigments, by Horace T. Remo. 2, 5p. 1964. $0.05.
Reports of Investigation
No. 6338: Experimental conversion of hematite to
magnetite with solid reductants, by P. A. Wasson and
M. M. Fine. 13p. 1963.
No. 6377: Developing thermochemical model for
iron blast furnace, rate of reduction of oxide sphere in
stream of reducing gas, by Hillary W. St. Claire. 3,
22p. 1961.
73

No. 6394: Some iron phyllosilicates of Cuyuna and
Mesabi districts in Minnesota, by Rolland L. Blake.
3, 33p. 1964.
No. 6399: Anionic flotation of silica from wester
Mesabi and Menominee Range iron ores; by D. W,
Frommer and others. 3, 25p. 1964.
No. 6403: Uranium alloyed steels, their fabrication
and mechanical properties, by L. W. Higley, Jr. and K.
A. Fowler. 3, 16p. 1964.
No. 6405: Melting pyrophoric hydrogen-reduced
iron powder for production of steel, by Lloyd H. Banning
and Oliver C. Fursman. 2, ii, 27p. 1964.
No. 6425: Experiments with self-generated carbonexpanded
iron catalyst for synthesis of methane, by J.
J. Demeter and others. 2, ii, 37p. 1964.
No. 6481: Smelting copper reverberatory slags to
recover iron of low copper and sulfer content, by V.
E. Edlund. 3, 14p. 1964.
No. 6497: Electric smelting of titaniferous iron o
from Alaska, Montana and Wyoming; by Wesley T.
Holmes, II and Lloyd H. Banning. 2, ii, 23p. 1964.
No. 6515: Effect of uranium on isothermal transfo
mation and hardenability of low-alloy steel, bv K. A.
Fowler and L. W. Higley, Jr. 3, 18p. 1964.
U. S. SHIPS STRUCTURE COMMITTEE
Report
No. 162: Exhaustion of ductility and brittle fracture
of E-steel caused by prestrain and aging, by C. Mylovas.
35p. 1964.
74

REVIEW OF IRON A N D STEEL
LITERATURE FOR 1965
A CLASSIFIED LIST OF THE MORE
IMPORTANT BOOKS, SERIALS AND
TRADE PUBLICATIONS DURING THE
YEAR; WITH A FEW OF EARLIER
DATE NOT PREVIOUSLY ANNOUNCED
By ESTHER CHESIRE
Science and Technology Department.

CARNEGIE LIBRARY
OF PITTSBURGH
A free public library donated by
Andrew Carnegie and maintained by
the City of Pittsburgh.
A supplemental appropriation by the
County of Allegheny provides for free
service to County residents.

Review of Iron and Steel Literature for 1965
THIS BIBLIOGRAPHY, the forty-ninth annual
Review of Iron and Steel Literature compiled for
the Blast Furnace and Steel Plant, attempts to list
books and pamphlets published during 1965, with
some of earlier date not included in previous issues.
When possible, the compiler has examined the
publications listed. In some cases they were not accessible,
and the only information regarding them
was in technical journals and publishers' announcements;
unfortunately this information is not always
accurate or complete for bibliographic purposes.
Prices are difficult to verify and may vary from one
source to another so that those listed may he inaccurate
in some cases.
The Science and Technology Department, Carnegie
Library of Pittsburgh, receives the non-secret reports
issued by the Atomic Energy Commission (AEC), the
National Aeronautics and Space Administration
(NASA), and many other publications from various
government agencies. Complete translations and abstracts
of articles appearing in foreign language journals
are often included.
The Science and Technology Department is a partial
depository for atomic energy reports from Canada,
Great Britain, and Denmark. It also receives some
from Germany, Israel, Italy, Japan, the Netherlands,
Spain, Sweden, and Switzerland.
This list is concerned only with separately published
books and pamphlets. It is highly selective and makes
no attempt to be all inclusive.
Much of the important literature in the field appears
in current periodicals and journals which may

e approached through guides such as: Applied
Science and Technology Index, British Technology
Index, Chemical Abstracts, Engineering Index, In.
ternational aerospace abstracts, journal of the
Iron and Steel Institute, Review of Metal Literature,
and other abstracting and indexing services.
Comprehensive indexes of United States government
publications currently available for reference are the
Monthly Catalog of U. S. Government Publications,
Scientific and Technical Aerospace Reports,
Nuclear Science Abstracts, U. S. Government
Research and Development Reports, and the Government-Wide
Index to Federal Research and
Development Reports.
The Department provides photocopies, accessibility
to reports and journals, and reference assistance in
locating material. Comprehensive lists of books and
journal articles may be found and literature searches
conducted by means of the abstracts, indexes and
bibliographies available in the Department.
The compilation of this bibliography was undertaken
as a project by the Science and Technology Department
under the supervision of Miss Esther Chesire
with the cooperation and assistance of other staff members.
Daniel R. Pfoutz, Head
Science and Technology* Department
Carnegie Library of Pittsburgh

Page
Automation and Computers 7
Codes—Standards 7
Contents
Corrosion—Protective Coatings 11
Design and Construction 12
Economics, History, Statistics, Directories, Education 17
Foundry Practice 25
Metallurgy, Refractories, Testing, Working 26
Iron Ores 40
Welding 41
United Stales Government Publications 41

AUTOMATION AND COMPUTERS
Chelyustkin, A. B. Application of computing techniques
to automatic control systems in metallurgical
plant. 246p. 1964. Macmillan, N. Y. $10.
Dressier, Horst Wilhelm. Einflusc grossen auf die
Zerspanbarkat von Automaten stahl, lllp. 1964. Tech.
Hochsch. Aachen.
Dissertation. Great influence of machinabilily on automatic
steel.
Farmer, J. A. Planning and scheduling a steelworks
by electronic computer, iii, 37, 26, [18]p. 1965. B.I.S.
R.A., Sheffield. (OR/CA/17/62).
Theisges, Hans Wilhelm. Bestimmung der Reduzierbarkeit
von Eisenerzcn unter programmierten Hochofenbedingungen.
125p. 1964. Tech. Hochsch, Aachen.
Dissertation. Determination of iron ore reduction in pro*
grammcd blast furnace operation.
CODES - STANDARDS
All-Union Scientific Institution for Standardization.
Standardization of technological equipment for castings
production. 92p. 1963. Moscow. 76 k.
American Gear Manufacturers Association. AGMA
standard 241.02. Standard specification for general industrial
gear materials — steel (drawn, rolled and
forged) lOp. 1965. The Assn. Washington, D. C.
$2.50 (Members $1.25).
American Society for Testing and Materials.
ASTM Standards on iron-chromium, iron-chromiumnickel
and related alloys, comp. A10. 634p. 1965. $8.50.
(Members $5.95).

1965 Book of ASTM standards.
Pt. 1. Steel piping materials. 622p. $10. (Members
$7.70).
Pt. 2. Ferrous castings. 322 p. 1965. $8. (Members
$5.60).
Pt. 3. Steel sheet, strip, bar, rod, wire, metalliccoated
products. 742p. 1965. $13 (Members
$9.10).
Pt. 4. Structural and boiler steel, reinforcing steel,
ferrous filler metal, ferro-alloys. 760p. 1965. $13.
(Members $9.10).
Pt. 32. Chemical analysis of metals, sampling and
analysis of metal bearing ores. 852p. 1965. $15.
(Members $10.50).
British Iron and Steel Research Association. Plant
and Engineering Div., Control Eng'g. Comm. Working
Group on Electronic Equipment Standards. Recommendations
for specifying electronic and associated
equipment for the iron and steel industry. 31p. 1964.
The Assn., London. 10/-.
British Standards Institution.
No. 4: pt. 2: 1965: Structural steel sections. Pt. 2:
Hot-rolled hollow sections. 1st. rev. 35p. 1965. 6/-.
No. 41: 1964: Cast iron spigot and socket flue or
smoke pipes and fittings. 15p. 6s.
No. 78: Pt. 2: 1965: Specification for cast iron spigo
and socket-pipes (vertically cast) and spigot and
socket fittings. 73p. £1. 10s.

No. 122: 1964: Specification for steel fabric for
the reinforcement of concrete. 22p. 7s. 6d.
No. 131: Pt. 5: 1965: Methods of notched bar test
Pt. 5: Determination of crystallinity. 2nd. rev. 9p.
1965. 4/6.
No. 1408: 1964: Specification for patented cold
drawn steel spring wire. 25p. 1964. 7s. 6d.
No. 1501: 1964: Specifications for steels for fir
and unfired pressure vessels, plates. 45p. 1964.
£15s.
No. 1726: Pt. 1: 1964: Guide to the design and specifications
of coil springs. Pt. 1: Helical compression
springs. 36p. 10s.
No. 2569: Pt. 1: 1964: Protection of iron and steel
aluminum and zinc against atmospheric corrosion.
12p. 1964. 4/6.
No. 3191: Pt. 3D: 1964: Specification for fixed playground
equipment for schools: Special requirements
for steel tubular horizontal bars. 8p. 1964.
3/6.
No. 3592: Pt. 2: 1964. Specification for steel wire
for rubber hose reinforcement. Pt. 2: Patented
steel wire. 9p. 1964. 4s. 6d.
No. 3687: 1963: Specification for crane-suspended
hand-operated geared ladles for iron foundries.
22p. 1963. 7s. 6d.
No. 3799: 1964: Forged steel pipe fittings, screw
and socket-welding for the petroleum industry.
19p. 15s.
9

No. 3808: 1964: Cast and forged steel flanged
screwed and socket-welding wedge gate values
(compact design), sizes 2 in. and smaller for the
petroleum industry (4 to size) 15p. 12s. 6d.
No. 3847: 1965: General requirements for mash
seam welding in mild steel. lOp. 1965. 4/6.
No. 3894: Pt. 1: 1965: Method for converting elongation
valves for steel: Pt. 1: Carbon and low
alloy steels. 22p. 1965. 7/6.
Deutschen Normenausschuss and Verein Deutscher
Eisenhuttenleute, eds. Kurznamen und Werkstoffnummern
der Eisenwerkstoffe in DIN-Normen und Stahl-
Eisen-Werkstoff blattern. Ed. 4.108p. 1964. Verl Stahleisen,
Diisseldorf. 10 DM (DIN-Normenheft 3).
Short name and material numbers of iron materials in DIN
standards and steel iron materials sheets.
Deutscher Normenausschuss. DIN steel and iron,
1859-1963. Beuth-Vertrieb GmbH., Berlin. DM 104.20.
Great Britain Navy Dept. Advisory Comm. on Structural
Steel. Requirements for the use of notch tough
steels in engineering and structural specifications, vii,
19p. 1965. H.M.S.O., London. 8/6. (Reports no. P.7).
Gottsch, H., 6 Hasenjager. Technische Baubestimmungen:
Hochbau, Tiefbau, Baulenkung, Wiederaufbau.
1964.
Technical regulations for constructional engineering: Structural,
civil engineering works control, reconstruction. Pi-. 17-
20 of Ed. 5. PL 18: Standard specification 17 100 on structural
•teeU.
Iron and Steel Institute. National steel specifications.
Ill, 215p. 1964. The Institute, London. 65/-. (Special
rpt. No. 88) £3 5s.
10

Japan Society for Testing Materials, Japan. Congress
on Testing Materials. Science Council of Japan.
Proceedings of the Sixth Congress, Kyoto, 1962. viii,
). 1963. The Society, Kyoto.
United Steel Companies, Ltd. Steel specifications.
Ed. 2. 222p. 1964. The Company, Sheffield.
Woolman, J., 6 Motram, R. A., Comp. Mechanical
and physical properties of the British standard En
steels (B5970-1955) VI: Enl-En 20. xx, 442p. 1964.
Pergamon, Oxford. £7. 7s.
CORROSION - PROTECTIVE COATINGS
AkoVzin, P. A. 6 Gulyaev, V. N. Korrozionnoe Rastreskivanie
Austenitnysh Stalein V. Teploenorgeticheskam
Obor undovanii. 271p. 1963. Moscow. 79k.
Stress corrosion cracking of austenitic steels in generating
plant.
American Welding Society. Corrosion tests of metallized
coated steel. 6-year report. 23p. 1962 [1965] The
Society, N. Y. $2.
Corrosion Advice Bureau. Design and the prevention
of corrosion. 14p. 1964. BISRA, Sheffield. CMG/
B/25/64.
Engett, Hans Jurgen, and others. Die Spangsrisskorrosion
von Weicheisen in Kalziumnitrat-Losungen.
46p. 1964. Westdt. Verl, Kbln. 25.50 DM.
(Forsch. des Landes, Nord. — Westfalen No. 1384).
Stress corrosion cracks in soft iron in calcium nitrate solutions.
Evans, Ulick R. Introduction to metallic corrosion.
253p. 1965. St. Martins Pr., N. Y. $6.75.
n

Guzzoni, G., 6 Storace, G. Corrosione dei metalli
eloroprotezione. Ed. 2. xii, 728p. 1964. Hoepli, Milan
15.000L.
Metallic corrosion.
Institution of Metallurgists. Corrosion and protection
of metals. Lectures. Refresher course, 1964.103p
1965. Iliffe, London. £1 7s. 6d.
Levin, /. A., ed. Intercrystalline corrosion and corrosion
of metals under stress. 327p. 1962. Consultants
Bur., N. Y. $18.
Osterreichischer Stahlbauverband. Europaiscbes
symposium Schutz von stahlkonstruktionen durch metallische
Uberziige, 1964. 130p. 1964. Rudolf Bohmann,
Industrie-und Fachverlag, Vienna.
European symposium on protection of steel structures bj
metallic coatings.
Schaller, Ebertiard. Beitrag zur Untcrsuchung voo
Spannungen und dynamischen Torgangen in der
Grenzschicht zauischen Werkzeug und Span bci der
Stahl/ spanung mit Hartmetallwerkzeugen. 118p.
1964. Techn. Hochsch., Aachen.
Dissertation. Contribution on the examination of strain n
the boundary layers with cemented carbide steel machinist
tools.
Sippel, K. W., 6 Waasen, H. Vorberciten von Stahlflachen
zum Korrosions-schutz. 55p. 1964. Wiss. Verlgsges,
Stuttgart. 36 DM.
Preparation of steel surfaces for corrosion protection.
DESIGN AND CONSTRUCTION
American Society of Mechanical Engineers. ASME
handbook: Metals engineering-design, ed. by Oscar J.
Horger. 605p. 1965. McGraw-Hill. N. Y. $22.50.
12

American Water Works Association. Steel pipe design
and installation (Manual M.) 260p. 1964. The
Assn.. N. Y. $3.50.
Arya, Armand Swarup, 6- Ajmani, J. L. Design of
steel structures. 650p. 1964. Nem Chand & Bros., Roorkee,
U., India. Rs 17.50.
Association of Manufacturers of Steel Door and
Window Frames. Kwaliteitseisen Stahlen Ramen en
Deuren. 38p. 1964. The Assn., The Hague.
Quality requirements for steel windows and doors.
Atrops, Hans. Baustahl — ABC. Werkstoff-Fragen,
Werkstoff-Verhalten schweissen. 218p. 1964. Werner-
Verlag, Diisseldorf. 25 DM.
ABC of structural steels: Material problems, material behavior,
welding.
Baeschlin, M., comp. Contruire en Acier 2: halles
batiments a etages, ponts, constructions a usages divers.
509p. 1962. Chambre Suisse de la Construction
Mctalliquc, Zurich. 44 Sw. fr.
Steel construction 2: Single-story sheds, buildings of two
or more stories, bridges, structures for miscellaneous purposes.
Beedle, L. S., and others. Structural steel design.
xii, 829p. 1964. Ronald Pr., N. Y. $12.50.
Blumberg, Harry S. Type 316 for elevated temperature
power-plant applications. 51p. 1965. Climax Molybdenum,
N. Y.
British Constructional Steelwork Association. Handbook
on structural steelwork: properties and safe
loads; tables prepared and issued jointly by the association
and the British steel makers. Ed. 2. 376p.
1964. The Assn., London. 15s.
16

Buch, A., ed. Fatigue resistance of materials and
metal structural parts. 313p. 1965. Macmillan, N. Y.
$15.
Proceedings of an International Conference, Warsaw, I960.
Canada. Dept. of Mines 6 Technical Surveys.
Report.
No. 64-1: Mineral processing. [8]p. 1964.
Research Reports.
No. R-129: Uranium in alloy steel by C, E.
Makepease. x, 67p. 1964. $1.
No. R-137: Split fractures in tension tests of
steel, by H. H. Bleakney. iv, 16p. 1964. $50.
Canada. Dept. of Mines and Technical Surveys
Mines Branch.
Information Circular
No. 168: Notch toughness of ultra-high strength
steels in relation to design considerations, by
R. C. A. Thurston. 54p. 1964.
Canadian Institute of Steel Construction. Structural
steel for buildings. 341p. 1964. The Institute, Toronto.
(Steel Construction Ser., Bk. 3).
Centre Technique Industrial de la construction
Metallique. La gestion des stocks en construction
metallique. 12Sp. [1964] The Author, Paris. 29 Fr. fr.
Stocks management in metal [steel] construction,
Cliambre Syndicate des Fabricants de Tubes d'Acier.
Le tube d'acier dans la construction m&allique. 132p.
1964. The Author, Paris.
Steel tube in steelwork constructional engineering.
14

Cooper, G. E., b Farrell, J. Constructional steelwork
shop practice. A textbook for apprentices and
students. Ed. 2. 242p. 1964. Iliffe, London. £1 5s.
Deutschen Stahlbau. Stahlbau. Ein Handbuch fur
Studium und Praxis in 3 Banden. Ed. 2. xxiv, 840p.
1964. Stahlbau-Verlagses. Koln. 87.50 DM.
Steel construction handbook.
Duval, Claude. Dimensions optimales et adaptation
au marchedes entreprises de construction metallique.
109p. 1964. Centre Technique Industrial de la Construction
Metallique. 31 Fr. fr.
Optimum size and adaptation to steelwork contracting.
Franz, Gotthard. Konstruktionslchrc des Stahlbetons.
bd.l: Grundlagen und Bauelemente. xii, 421p.
1964. Springer, Berlin. 66 DM.
Steel concrete construction theory, v. 1: Basic and structural
elements.
German Steel Information Centre. Handbuch fur
die Berechnung von Bauteilcn aus kaltgeformten diinniwandgem
Stahlblech. 302p. 1965. Verlang Stahleisen,
Diisseldorf. 20 DM.
Design handbook for cold-formed shect-steel structural members.
German Structural Steelwork Association. Stahlbau-
Tagung, Aachen, 1964. 62p. 1964. Stahlbau-Verlag,
Cologne. 11 DM.
1964 Steel construction symposium.
Gotthard, Franz. Konstruktionslehre des Stahlbetons.
421, xiip. 1964. Springer, Berlin. 66 DM.
Steel concrete construction book.
Gutman, David. Estimating structural steelwork.
Serial 5750-4. 37p. 1963. Ed. 2. International Correspondence
Schools, Scranton, Pa.
15

Handbook of structural steel. 792p. 1964. Redpath,
Brown & Co., London.
Hill, David Young. Bridge calculations and design
for steel bridges. Ed. 2. viii, 295p. Griffin, London.
70s.
International Association for Bridge and Structural
Engineering. Congress 7th, 1964, Rio de Janeiro. Preliminary
pub. 1,01 lp. 1964. Verlag Leeman, Zurich.
Joint Committee of the Institution of Structural Engineers
and the Institute of Welding. Report on fully
rigid multi-story welded steel frames. 42p. 1964. The
Institution, London. £0.15.0.
Journees d'Information. Deuxieme programme de
constructions experimentales. Utilisation de lacier
dans le batiment 9 et 10 juin, 1964. lOOp. 1964. ECSC.
High Authority, Luxembourg.
Information Symposium. Second program of experimental
structures. Use of steel in building construction, 9-10. June.
1964.
Kasaikin, Boris Sergeeotch. Struktura i mikromekhanizm
Khrupkogo razrusheniniia, stali. 263p. 1964.
Texnika, Kiev.
Steel structures.
Kloth, H. C. Willi. Atlas der Spannungsfelder in
Technischen Bauteilen. 544. xxviiip. 1965. Verlag Stahleisen,
Diisseldorf.
Atlas of stress areas in engineering structural components.
Lothers, John Edmond. Design in structural steel.
Ed. 2. xiii. 585p. 1965. Prentice-Hall, Englewood Cliffs.
$17.35. (Schools $13.). (Civil Engg. and Engg. Mech.
ser.).

McCormac, Jack C. Structural steel design. 542p.
1965. Intn. Textbk., Scranton, Pa. $10.50.
Office Pour L'Utilisation de lAcier. L'Acier dans le
batiment elements d'emploi. 74p. 1964. OTUA, Paris.
Steel used in structural elements.
Papaspyrou, S. Diagramme zur Kippuntersuchung.
Auskragender Stahl I-Trager. 54p. 1964. \V. Emst,
Berlin. 19.80 DM.
Diagrams for the analysis of lateral instability of cantilevered
steel I-section girders.
Parker, Harry Ewing. Simplified design of structural
steel. Ed. 3. 307p. 1965. Wiley, N. Y. $7.75.
Parkes, E. W. Introduction to the theory of structures.
198p. 1965. Pergamon, Long Island City, N. Y.
21s.
Tall, Lambert, and others. Structural steel design.
xii, 829p. Ronald, N. Y. $12.50.
U. N. Economic Commission for Europe. Steel Committee.
Use of steel in construction. 2, vii, 198p. 1964.
11/6. H.M.S.O., London.
Walton, Thomas. Steel ships; their construction and
maintenance; a manual for shipbuilders, ship superintendents,
marine engineers and students. Ed. 9, rev.
by R. G. Lockhart and S. W. Bolwell. 353p. 1964.
Griffin, London. 90s.
ECONOMICS, HISTORY, STATISTICS, DIRECTORIES,
EDUCATION
American Iron and Steel Institute. Directory of iron
and steel works of the United States and Canada,
1964. Ed. 30. 409p. 1964. The Institute, N. Y. $10.
17

Bienfait, Jean. La siderurgie japonaise. 103p. 1965.
Centre de Recherches Europeennes. Lausanne. 21s. Fr.
Japanese iron and steel industry.
Brawn, Franz. Das Spiel mit Stahl. 128p. 1964. Wilmy-Verlag,
Nuremberg. 24 DM.
Playing with steel.
British Employers' Confederation, and others. British
industry and the proposal to nationalize steel. 2, 5p.
1965. Federation of British Industries, London. 1/-.
British Iron and Steel Federation. Research in the
U.K. steel industry. 1, 32p. 1964. The Author, London.
Gratis.
British Iron and Steel Federation. Simple guide to
basic processes in the iron and steel industry. Rev.
ed. 43p. 1964. The Federation, London. Gratis.
Centre de Reclierche de VHistoire de la Siderurgie.
Revue dTustoire de la siderurgie. v.5. 208p. 1964. The
Centre, Nancy, France.
Review of the history of iron and steel making. Special
issue.
Chambre Syndicate des Producteurs d'Aciers Fins et
Speciaux. Les aciers sp^ciaux a la pointe du progres.
1965. The Author, Paris.
Special steels, the present position.
Cold Rolling Steel Strip Association. Cold rolled
steel strip. 72p. 1965. Neame, London. Gratis.
Comite Europeen de la Chandronnerie et de la Tolere.
Internationale Stahl Werkstoff Tabellen. v. 1.
Kesselbleche. 1964. Beuth-Vertr. Berlin. 70 F.
International steel material tables, v.l: Boiler plate.
18

Comite Special de la Siderurgie. L'industrie sider
urogique en 1963 et tendances en 1964,170p. 1964. Organisation
de Cooperation et de Development Economique,
Paris.
Iron and steel industry in 1963 and trends in 1964.
Congress on the Use of Steel, Luxemburg, 1964.
Termcs techniques. 5v. 1964. ECSC. Terminology Bureau,
Luxemburg.
Technical terms.
Davis, Edward Wilson, Pioneering with taconite.
246p. 1964. Minn. Historical Society, Minneapolis. $5.
Dennis, William Herbert. Hundred years of metallurgy,
ix, 342p. 1964. Duckworth, London. 35/-.
Dolby, James. Steel navy; a history in silhouette,
1860-1963. Rev. ed. 168p. 1965. MacDonald. 21s.
European Coal and Steel Community. High Authority.
Investment in the Community coal mining and
iron and steel industries: report. S7p. 1964. HMSO.
London. 14/6.
Frumento, Armando. Imprese lombarde nella storia
della siderurgia Italiana. v. 2; II ferro Milanese tra il
450 e il 1796. xxix, 505p. 1963. Acciaierie e Ferriere
Lombarde Fald, Milano.
Influence of Lombardy on the story of Italian Metallurgy.
Cansauer, Karl Friedrich. Lagerung und Verflechrung
der Eisen schaffenden Industrie der Montanunionslander
in rauimlicher Sicht. 152p. 1964. Steiner,
Wiesbaden. 34 DM. (Kolner Forschungen zur Wirtschaftsund
Socialgeopraphie, v. 1).
Storage and complications in the iron production industry.
19

Geplante Schnell-lnstandsetzung und vorbeugende
Instandhaltung fiir Bergbau, Eisenhiitten-und ahnlich
gelagerte Industries 164p. 1964. W. Classen, Essen.
38 DM.
Planned rapid repairs and preventive maintenance for the
mining, iron and steel and similar industries.
Great Britain Ministry of Power. Steel nationalization.
24p. 1965. H.M.S.O. London. 1/9. (Cmnd. 2651).
Handbuch der europaischen Eisen-und Stahlwerke
Manuel des usincs curopeennes de la siderurgie.
Handbook of the European iron and steel works. Ed.
5. 1442p. 1964. Montan-U-Wirtschaftsverl, Frankfurt
(M) 109 DM.
Hanson, Albert, O Parr, J. Gordon. Engineers guide
to steel, viii, 406p. 1965. Addison-Wesley, Reading,
Mass. $13.75.
Heiler, Toni. Dictionnaire technique illustre des
outils coupants pour I'usinage des metaux. 474p. 1965.
Eyrolles, Paris. 99.66 Fr. fr.
Illustrated technical dictionary of metal-working cutting
tools. In French, German, English. Italian and Spanish.
Heller, Franz Friedrich, ed. Ix>b des Eisens. Ein
Mosaik der Welt literatur. 207p. 1965. Verlag Stahleisen,
Diisseldorf, 29 DM.
In praise of iron. A mosaic of world literature.
Herscu, George F., Corp. Elsevier's dictionary of
rolling mill terminology in four languages: English/
American, French, Spanish, German. 345p. 1965. Elsevier,
N. Y. $20.
Higham, A. A very scientific gentleman. The major
achievements of Henry Clifton Sorby. ix, 160p. 1963.
Oxford, London. £1 Is.
20

Hindustan Steel Co., Ltd. Statistics for iron and
steel industry in India, 1964. 137p. 1964. The Co.,
Hinoo, Ranchi, India. $4.
Hughes, Helen. Australian iron and steel industry,
1848-1962, xv, 213p. 1964. University Press, Melbourne,
Cambridge. $8.50.
Indian Institute of Metals. National Metallurgical
Laboratory. Iron and Steel Institute. Recent developments
in iron and steelmaking with special reference
to Indian conditions. 1963. The Institute. London.
1964. £5 5s. (Special rpt. no. 78).
Instituto Latinoamericano del Fierro y el Acero. L
normalizacion siderurgica en America Latino, 1960.
Ed. 2. 118p. 1960. The Author, Santiago, Chile. $5.
Standardization of steel in Latin America.
International Symposium on Recent Developments
in Iron and Steelmaking with Special Reference to
Indian Conditions, 1963, Jamsliedpur. Recent developments
in iron and steelmaking. 7, 239p. 1964. Iron &
Steel Institute, London. £5/5/-. (Iron and Steel Institute.
Special Rpt. No. 78).
Iron and Steel Board. Developments in the iron and
steel industry, v, 171p. 1964. HMSO, London, lis.
Jenkin, Alfred Kenneth Hamilton. Mines and miners
of Cornwall. 9v. 1961-1964. Truro Bookshop, Truro.
I Around St. Ives. 1961. 7s. 6d.
II St. Agnes — Perranporth. 1962. 8s. 6d.
Ill Around Redruth. 1962. 8s.
IV Penzance — Mounts Bay. 1962. 28s. 6d.
V Hayle Gwinear & Gwithian. 1963. 8s. 6d.
VI Around Givennap. 1963. 8s. 6d.
21

VII Perranporth — Newquay. 1963. 9s. 6d.
VIII Truro to the clay district. 1964. 9s. 6d.
IX Padslow, St. Columb and Boamin. 1964. 9s. 6d.
Jernkontoret. Swedish steel manual. lOOp. 1962. Th
Author, Stockholm. $5.25.
Keeling, B. S., £ Wright, A. E. G. Development of
the modern steel industry, viii, 240p. 1964. Longmans,
London. 25/-.
Lauersen, W. Stahlwirtschaftliche Landerberichte.
h. 9: Polen. viii, 116p. 1962. Institut fiir Weltwirtschaften,
Kiel. DM 14.
Economical steel region report, Poland.
Lindsay, J. A. An anatomy of English wrought iron.
vi, 57p. 1964. Alec Tiranti, London. £2.
Mayer, Karl Ernst. Was der Siemens-Martin-Stahlwerker
von seiner Arbeit wissen muss. 2. ed. 223p.
1963. Verl. Stahleisen, Diisseldorf. 15.80 DM.
What the Siemens-Martin steel worker should know about
his work.
Ministry of International Trade and Industry.
Agency of Industrial Science and Technology. Iron
steel industry and its standardization in Japan. 48p.
1965. The Agency, Tokyo.
National Productivity Council. Iron & steel indus
in USSR and Czechoslovakia. 283p. 1963. The Council,
New Delhi, India. Rs 5.00.
Norris, James D. Frontier iron: the Maramec Iron
works, 1825-1876. x, 206p. State Historical Society
of Wisconsin, Madison. $4.25.
22

O'Neill, Richard W. High steel, hard rock and deep
water; the exciting world of construction. 280p. 1965.
Macmillan, N. Y. $12.95.
Organisation for Economic Co-operation and Development.
Iron and steel industry; a study. 3,163p. 1964.
OEDC, Paris (A.M.S.O., London) 15/-.
Includes chaptors on Canada, Japan and the United States.
Pryke, Ricliard. Why steel? [2], 33p. 1965. Fabian
Society, London. 3/-. (Fabian Society Res. ser. no.
248).
Ross, George W. Nationalization of steel; one step
forward, 2 steps back? 162p. 1965. Intnl. Pub. $7.50.
Saksonoo, G. M. Anglo russkii slovar' po prokatke
metallov'. lSlp. 1963. Fizmatgiz, Moscow. 10s.
English-Russian dictionary on rolling of metals.
Salewski, Wilhelm. Mitteldentsche Eisenwerke in alter
zeit, Ein Beitrag zur eisengeschichtlichcn Bilddokumentation.
22p. 1964. Galt-garben-Verl., Holzminden.
95 DM.
Central German iron works in olden times.
Society of Automotive Engineers. Iron and steel-
Handbook supp. HS30. 174p. The Society, N. Y. $6.50.
(Members $3.25) 1965.
Stahlwirtscliaftliche Lander-berichte: Heft 10. Jugoslavia.
1964. Institute for World Economy, Kiel. 16
DM.
Economic reports on ferrous products: Book 10. Jugoslavia.
Talese, Gay. The bridge. 140p. 1964. Harper, N. Y.
$5.95.
Factual account of the building of the Verroiano-Narrows
Bridge.
23

Taylor, J. L. English-Portugese metallurgical dictionary.
299p. 1963. Stanford Univ. Pr. Stanford, California.
$5.
Temin, Peter, Iron and steel in nineteenth-centur
America; an economic inquiry. 304p. 1964. Mass. Inst.
of Technology. Cambridge. $7.50.
Thornes, V., & Kitts, A. Steel, the commanding
height of the economy, xvi, 48p. 1964. Lincolns-Prager,
London. 2s 6d.
U. N. Economic Commission for Europe. Statistics
of world trade in steel, vi, 43p. 1964. H.M.S.O. London.
5/6.
U. N. Economic Commission for Europe. Steel Committee.
European steel market. [2] v, 135p. 1965. H.M.
S.O. London. 7/6.
Voice, E. W. Ironmaking under Indian conditions.
19p. 1964/65. BISRA, London.
Watkins, Ralph James, and others. Market for steel
in Mexico, by principal markets. 1953-62 and demand
projections, 1963-70 Pub. for Surveys and Res. Corp.,
Washington, xxi, 91p. 1965. Praeger. $20.
Webb, Robert N., 6 Moss. Penrod. Magic of steel
and oils: history, development, and uses. 61p. 1965.
Crossct, N. Y. $1.95.
Wu, Yuan-li, Steel industry in Communist China,
with a contribution by Ronald Hsia. 334p. 1965. Praeger
on war. $7.50. (Stanford Univ. Hooner Inst, and
Peace Pub.).

FOUNDRY PRACTICE
American Foundrymens Society. Design of ferrous
castings. 123p. 1964. The Society, Des Plaines, 111. $7.
Balandin, G. F. Skin-freeze castings. 234p. 1964.
rael Program for Scientific translations. Daniel Davey,
N. Y. $11.50.
British Steel Castings Research Association. Recommended
procedure for the ultrasonic examination
of steel castings, vi, 49p. 1964. The Assn., Sheffield,
England. 30s.
Fachgemeinschaft Gusseiserne Rohre, Gussrohr
Handbuch. 164p. 1963. Vulkan-Verl Classen, Essen.
Cast iron pipe handbook.
Foseco International, Ltd. Information Dept. Fosec
foundryman's handbook; facts, figures and formulae.
Ed. 7, rev. 387p. 1965. Pergamon, Long Island City,
N. Y. $3.50.
Gulyaev, B. B., ed. Gases in cast metals. 258p. 19
Consultants Bur., N. Y. $35.
Iron and Steel Institute. Continuous casting of st
1959-1964. 33p. 1964. The Institute, London. 70s.
(Bibliographical ser. no. 21b).
Pearce, James George, 6 Bromage, K. Copper m
cast iron. 127p. 1964 [1965]. Hutchinson for Cooper
Development Assn. London. 30s. (Pub. no. 65).
Prokhorenko, K. K., at\d others. Vyplavka i razliv
kachestvenorykh stalei. 201p. 1964. Metallurgia, Moscow.
Production and casting of high-gmde steels.
25

Standard Catalogue Co., Ltd. Foundry directory.
Ed. 3. xxviii, 491p. The Co., London. £2 2s.
Steel Founders' Society of America. Flow of steel
in molds. 120p. 1958. Reprinted 1965. The Society,
Cleveland.
Taschenbuch der giesserei-Praxix, 1965. 464p. 1965
Schiele & Schon, Berlin. 10 DM.
Foundry practice handbook.
Ussack, P. A., comp. Continuous casting of steel.
[Ed. 3, rev.] [371] 1964. Crucible Steel Co., Pittsburgh,
Pa. (Bibliographical ser. 12).
Cast Metals Research Journal, v. 1, June, 1965. Am
erican Foundrymen's Society, Des Plaines, 111. $5. annually.
Russian Castings Production, v. 1, 1962. British C
Iron Research Assn., Birmingham. $35 annually.
Complete English translation of Liteinoe Proizvodstvo.
METALLURGY, REFRACTORIES, TESTING, WORKING
Albrecht, A., ed. Stahlschlussel. Nach-schlagewerk
Stahlschlussel, Ed. 7. 276p. 1964. Verlag Stahlschlussel,
Marbach/Neckar £4. 6s.
Key to steel.
Allan, R. K. Rolling bearings, Ed. 3. xv, 395p. 19
Pitman, London. 63s.
American Institute of Chemical Engineers. Recent
advances in ferrous metallurgy. 147p. 1963. The Institute,
N. Y. $15. (Chem. Engg. Prog. Symposium,
Ser. no. 43).

American Institute of Mining, Metallurgical and Petroleum
Engineers. Ironmaking conference. 1963. Ed.
by D. H. Regelin and W. D. Gifford. 1964. Gordon
& Breach. $15. (Members $10.50).
American Society for Metals. Furnace atmospheres
and carbon control, xiii, 200p. 1964. The Society.
Metals Park, Ohio. $5.
American Society for Metals. Committee on Gas
Carburizing. Gas carburizing. 191p. 1964. The Author.
Metals Park, Ohio. $5.
American Society for Metals. Committee on
Quenching. Quenching and martempering. 277p. 1964.
ASM. Metals Park, Ohio. $5.
American Society for Metals. Committee on Induction
Hardening. Induction hardening and tempering.
229p. 1964. ASM. Metals Park, Ohio. $5.
Arbiter, Nathaniel, ed. Milling methods in the
Americas. 500p. 1964. Gordon & Breach, N. Y. $9.50.
(Paper $5.).
Arkharov, V. L, 6 Gor'unova, K. M., eds. Surface
interactions between metals and gases. 155p. 1965.
Consultants Bur., N. Y. $25.
Association Beige de Galvanisation, comp. Fe-Zn
dictionary. 80p. 1964. Association Technique Francaise
de Galvanisation, Paris. 5 Fr.
Association of Iron and Steel Engineers. Yearly proceedings,
1965. HOOp. 1965. The Assn., Pittsburgh.
Austin, James Bliss. Trends in the metallurgy of lowalloy,
high-yield-strength steels, v. 1. 12p. [1964]
ASTM, Philadelphia. $1.
27

Barkow A. G. Welding of high strength pipeline
steels. 12p. 1964. ASM. Metals Park, Ohio. (ASM
Tech. Rept. no. P. 13-2-64).
Belyaev, Anatolii Ivanovich, ed. Surface phenomena
in metallurgical processes. 228p. 1965. Consultants
Bureau, N. Y. $27.50.
Originally published by Metallurgy zdat. Moscow. 1963.
Bemski, George, i? da Silva, Ximenes Alexandrine
Internal fields of iron in Fe Pd alloys. 8p. 1963. Centro
Brasileiro de Pesquisas Fisicas. Rio de Janeiro. 5
Fr.
Berger, G. La dilatometrie differentielle appliquiee
a l'etude des aciers. xiv, 132p. 1965. Dunod, Paris. 24
Fr.
Differential dilatometry applied to the study of steel.
Bewley, Simon. Steel: performance of some U. K.
manufacturers compared. 3, 14p. 1965. Aims of Industry,
London. Gratis.
Bradley, James W, Effects of porosity on highstrength
steel welds. 39p. A.S.M. (Tech. rept. no. SF-
1-64).
Braun, Martin. Uber die spezifische Warme von
Eisen, Kobalt und Nickel im Bereich hoher Temperaturen.
185p. 1964. Univ. Koln Mathcm. Naturwiss.
Fak., Koln.
Dissertation. On the specific heat of iron, cobalt and nickel
in high temperature zones.
Brick, Robert Maynard, et al. Structure and properties
of alloys; the application of phase diagrams to
the interpretation and control of industrial alloy structures.
Ed. 3. xvi, 503p. 1965. McGraw-Hill, New York.
$13.75.
28

Briggs, Charles W. Flow of steel in molds. 120p.
1958 [1965]. Steel Founders' Society, Cleveland. $3.
Reprint.
British Iron and Steel Research Association. Second
conference on rolling. 63p. 1964. The Association, London.
15s.
British Iron and Steel Research Association, Metallurgy
Div. Metallurgical research in the U. K., 1963/
64. 2, 6, xxxiv p. 1964. The Assn., London. Gratis.
Buhl International Conference on Materials, Pittsburgh,
1963. Transition metal compounds — transport
and magnetic properties, ed. by E. R. Schatz. 200
p. 1964. Gordon and Breach, N. Y. $9.50 (Paper $5).
Bukslttein, M. A. Proizoodstvo Stal'nykh Kanatov.
300p. 1963. Metallurgizdat, Moscow. 85k.
Production of steel wire rope.
Cfiater, William John Balenoch, O Harrison, John
Lawrence, eds. Recent advances with oxygen in iron
and steel making, vii, 402p. 1964. Butterworth, Washington,
D. C. $17.
Colombier, L., i? Hocknumn, J. Aciers refractories
inoxydables. Aciers refractories. Ed. 2. xv, 619p. 1965.
Dunod, Paris. 118 Fr.
Refractory steels.
Commonwealtli Economic Committee, Intelligence
Br. Iron and steel and alloying metals: a review. Ed.2.
v. 2. 21p. 1965. H.M.S.O, London. 51/-.
Conference on Fatigue of Metals, 2nd, Moscow,
1960. Fatigue strength of metals...ed. by Dr. P.
J. Forrest. 2, 419p. 1964. National Lending Library
for Science and Technology. Boston Spa. Yorks. £5.

Crawford, J. D., and others. Influence on alloying
elements on the cold deformation of steel. ISp. 1964.
American Society for Metals. Metals Park, Ohio.
(Tech. rpt. no. P. 16-1-64).
Crimes, P. B. Rates of mass transfer in electrosla
remelting. Pt. 1: Model studies. 38p. 1964. British
Iron and Steel Research Assn., London. (Rept. no.
MG/A.72/64).
Dardel, Yves. La transmission de la chaleur au cou
de la trempe de lacier. 266p. 1964. Revue de Metallurgie,
Paris. 70 Fr.
Heat transmission and the course of solidification, in the reheating
and tempering of steel.
Demol, L. £ Mas, E. Assemblages par boulons a
haute resistance. Essais statiques. 32p. 1964. C.R.I.F.,
Brussels.
High-strength bolted connections. Static tests.
Derge, Gerhard, ed. Basic open hearth steelmaking.
Ed. 3. With supplement on oxygen in steelmaking.
xxii, 1007p. 1964. AIM,M. and P.E., N. Y. $8.
Deriagin, Boris V., ed. Research in surface forces
v. 21. Three-dimensional aspects of surface forces.
290p. 1965. Consultants Bur., N. Y. $27.50.
Dorschu, K. E., £ Lesnewich, A. Development of a
filler metal for a high-toughness alloy plate steel with
a minimum yield strength of 140 KSI. 14p. 1964.
(ASM Tech. Rept. no. P-13-664).
Duckworth, W. E. Strength increases in steels. 4,
72p. 1964. British Iron and Steel Research Assn., London.
Gratis.
SO

Elliott, John F., £ Meadowcroft, T. R., eds. steelmaking:
the Chipman conference. 306p. 1965. M.I.T.
Pr., Cambridge, Mass. $20.
Everhart, J. L. Impact extrusion and metals. 199p.
1964. Chemical Pub. Co., N. Y. $8.50.
Gme/m-Dtirrer Metallurgie des Eisens: Iron v. lalb.
583, 344p. 1964. Verlag Stahleisen. Diisseldorf.
$211. (Gmelins Handbuch der anorganischen chemie,
v.59).
Metallurgy of iron.
Golden Gate Metals Conference, San Francisco,
1964. Materials science and technology, v. 2 [14].
736p. A.S.M. Golden Gate Chapter, Berkeley, Calif.
$12.50.
Great Britain. Navy Dept. Advisory Comm. on
Structural Steel. A further comparison of transition
temperatures determined by various tests on seven
steels, vii, 63p. 1965. 22/6. (Reports no. P-16).
Gregory, E., i? Simons, E. N. Steel working processes.
240p. 1964. Ohams, London. £1 5s.
Gronegress, Hans Willi. Flame hardening. 64p.
1964. Springer, Berlin. DM 4.50.
Gschneidner, Karl, Jr., and others. Metallurgy at
high pressures and high temperatures. 409p. 1964.
Gordon and Breach, N. Y. $19.50. (Paper $8.75).
Guthmann, Kurt 6- Mund, Alfred, eds. Bekampfund
des braunen Stahlwerksrauches. 48p. 1964. Verlag
Stahleisen, Dusseldorf. 21 DM.
Combating brown steel plant fumes.
31

Hausner, Henry H., ed. New types of metal powders.
167p. 1964. Gordon & Breach, N. Y. (Metallurgical
Society Conf. v. 23) $9.50. (paper $3.95).
Hempel, Max. Dauerschwigfestigkeit bei 20 und
500°C von Stahlen mil niedrigem Kohlenstoffgehalt
und verschiendenen Titan-zusatzen. 58p. 1964. Westdt
Verl., Koln. 34 DM. Forschungsberichte des Landes
Norrheim-Wesrfalen, no. 1379).
Fatigue strength of steel at 20 and 500 C. with low carbon
content and various titanium additions.
Hering, Helmut. ThermodifFusion und elektrolytische
Uberfiihrung in Eisen. 59p. 1964. Techn. Univ.,
Berlin.
Dissertation. Thermal diffusion and electrolytic transmission
in iron.
Hofmans, M. Examen d'un nouvel acier pour cures
de reacteurs (endustrie nucleaire) 32p. 1964. C.N.
R.M. Liege, Belgium.
Examination of a new steel for reactor vessels (nuclear industry).
Illinois University Engineering Experiment Station.
Bulletin.
No. 469: Studies of the behavior of high-strength
bolts and bolted joints, by E. Clesson, Jr. and W. H.
Munse. [6], 35, [24]p. 1965. $1.50.
Imperial Chemical Industries, Ltd. "Cassel" manual
of heat-treatment and casehardening. Ed. 7. vp.
1964. The Author, London. £2.12.6.
Instituto Latinoamericano del Fierro y el Acero
(ILAFA). Memoria technica del terca congreso Latin-
American dex Siderurgie, 1963. iv, 134p. 1964. ILAFA,
Santiago. $16.
Proceedings of conference, Maculo-Venezuela, 1963.
32

Iron and Steel Institute. Metallurgical development
in high-alloy steels. Proceedings of a joint Conference
held by the British Iron and Steel Research Assn. and
the Iron and Steel Institute, 1964. viii, 262p. 1964. The
Institute, London. 65s. (Special rpt. no. 86).
Iron and Steel Institute. Steelmaking in the basic
arc furnace. 181, [2]p. 1964. The Institute. London
65s. (Special rept. 87).
Jaoul, B. Etude de la plasticite et application aux
metaux. xvi, 600p. 1965. Dunod, Paris. 138 Fr.
Study of plasticity and its application to metals.
Japanese Standards Association. J.I.S. handbook,
1963. Ferrous materials and metallurgy. 578. 1963. The
Assn., Tokyo.
Jesper, IL, O Achtelik, K. Kaltzahe Stahle. 55p. 1964.
Nickel Information Bureau, Diisseldorf.
Steels: tough at subzero.
Johnson, A. E.f 6- Henderson, J. Complex stress
creep, relaxation, and fracture of metallic alloys, vi,
76p. 1962. H.M.S.O., Edinburgh. 7s. 6d. (National Engineering
Laboratory Dept. of Sci. & Ind. Res.).
Kaiser, Hans-Rolf. Uber die Einfliisse einer Hartnerchromung
auf die Festigkeitscigenschaften von Eisenwerkstoffen.
106p. 1964. Techn. Hochsch., Darmstadt.
Dissertation. On the influence of hard chromium deposits on
the physical properties of iron materials.
Kennedy, A. J. Materials background to space technology.
206p. 1964. Newnes, London. 50s.
Ktessling, Roland, & Lange, Nils. Non metallic inclusions
in steel, vii, 104p. 1964. Iron and Steel Institute,
London. 42s. (Spec. Rept. 90).

Koch, Walter, and others. Untersuchungen zur Kinetik
der Karbidbung in Chromstahlen. 21p. 1964.
Westd. Verl Koln. 12 DM. (Forschungs. des Nord:-
Westfalen, no. 1414).
Investigations on kinetics of carbide structure in chroma
steels.
Koepel, Edward, 6- Park, B. New method of using
the zone refining technique, lip. 1964. American Society
for Metals, Metals Park, Ohio. (Tech. Rpt. no.
P-17-3-64).
Kollbrunner, C. F., O Hajdin, N. Mitteilungen der
Technischen Kommission der Schweizer, 120p. 1964.
Verlag Schweizer Stahlbau Vereinigung, Zurich. 18 Sw.
fr. Stahlbau Vereinigung. No. 29.
Torsion with restrained warping of thin walled members of
open cross section.
Kossowsky, Ram. Microstrain studies in iron and
molybdenum between 5 and 298°K. 209p. 1963. U. of
Penn., Philadelphia.
Thesis.
Kurrein, M. Plasticity of metals, x, 270p. 1964. Griffin,
London. £3. 15s.
Likhtman, V. I., and others. Physico-chemical mechanics
of metals; Adsorption phenomena in the process
of deformation and failure of metals, iv, 244p. 1964. Israel
Program for Scientific Translations. Oldbourne Pr.,
London. £4. 19s.
Loscher, Werner. Die Schwefelverteilung zwiscben
flussigem Eisen und Kalkhaltigen Phosphatschlacken.
45p. 1964. Bergakad, Clausthal.
Dissertation. Sulphur distribution between molten iron and
lime containing phosphate slags.
34

McMahon, Charles J., Jr. Micromechanisms of cleavage
fracture in poly crystalline iron. 59p. 1964.
National Acad, of Sciences. Washington, D. C.
Makowski, Z. S. Raumliche Tragwerke aus Stahl.
207p. 1963. Verlag Stahleisen, Dusseldorf. 38 DM.
Special wing assembly of steel.
Marincek, Borut. Stoff und Warmeumsatz metallurgischer
Vorgange. xii, 222p. 1964. Springer, Berlin.
34.50 DM.
Massonnet, C. Resistance des materiaux. 592p. 1964.
Sciences et Lettres, Liege. 800 Belg. fr.
Strength of materials, v. 2.
Mazzoleni, Francesco. La Materia introduzione alle
technologie del Materiali. xv, 707p. 1965. Hoepli, Milan.
12,000 L.
Introduction of technology of materials.
Montgomery, W., 6- Sheplierd, N. W. Oxy/fuel
burners in open hearth furnaces. 17p. 1964/5. BISRA,
London.
Muan, Armulf, 6- Osborn, Elburnt, F. Phase equilibria
among oxides in steelmaking. xx, 236p. 1965. Addison-Wesley.
Reading, Mass. $17.50.
Naidu, D. S. Engineering materials and their testing.
Pt. 1: Iron, steel and their alloys, viii, 232p. 1964.
Asia Pub. London. 30s.
35

Neuhauss, Maximilian. Uber das Formanderungsverhalten
von Stahlen bein Walzen auf der Flachbahn
und in Kalibern. 25p. 1963. Tech. Hochsch., Aachen.
Dissertation on the distortion behavior of rolled steel on
the flat trajectory and caliber.
Oiks, G. N., O loffe, Kh. M. Proizvodstvo Stali (Raschety)
552p. 1964. Metallurgizdat, Moscow. 112.16K.
Production of steel (Calculations).
Osterreichisch-Alpine Montangesellschaft, ed. Alpine-handbuch
1962. 487p. 1964. Rheinhold Schmidt,
Vienna.
Alpine handbook (on manufacture of steel and steel construction).
Petersen, Jens. Ober die Formanderungen beim
Kaltwalzen von Bandern. 64s. 1964. Tech. Hochsch.,
Aachen.
Dissertation. On the distortion in cold rolled bands.
Phillips, R.f 6- Duckworth, W. E. Effect of alloying
additions on the ausforming response of steels. 24p.
1964. British Iron and Steel Research Assn., London.
(Rept. no. MG/A/108/64).
Poluchin, P. I., and others. Rolling mill practice.
510p. 1964. Peace Pub., Moscow. 17.50 DM.
Richter, Friedhelm. Die Warmeleitfahigkeit des reinen
Eisens zwischen —180 und 1000°C unter bcsonderer
Beriicksichtgung von Phasenumwandlungen.
109p. 1964. Univ. Koln, Mathem.-Naturwiss. Fak,
Koln.
Dissertation. Heat conductance of pure iron between —180
and 1000° C. particularly in regard to phase transformation.
Rogers, R. R., ed. Iron ore reduction. 359p. 1964.
Macmillan. N. Y. $12.50.
36

Salli, Ilya VasiVevich. Structure formation in alloys.
140p. 1964. Consultants Bureau, N. Y. $18.50.
Saylor, James E. Parameters and limitation of roll
forming. 14p. 1965. ASTME, Dearborn, Mich. (Paper
no. SP-65-40).
Scholes, P. IL, and others. Project MD/D/258-Development
of physico-chemical methods of analysis. A
scheme for the rapid analysis of iron and steelmaking
slags, [ii]. 21, 14, 2p. 1965. BISRA, Sheffield.
Schurmann, Eberhard, O Groth, H. C. Schmelzyleichgewichte
im System Eisen-Schwefel-Kohlenstoff-
Phosphor und Silizium bei 1400° C. 31p. 1964. Westdeutsche
Verlag, Koln. 15.50 DM (Landes Nordheim-
Westfalen, no. 1398).
Melting balance in the iron-sulphur-carbon-phosphorus and
silicon systems at 1400° C.
Sermin, D. F. Continuous monitoring of iron ores
and sinters. Progress rept. 12, [16]p. 1965. BISRA,
Sheffield.
Slianahan, C.E.A., comp. Chemical analysis of flat
rolled steel products, x, 115p. 1962. Richard Thomas
Baldwins, London. £2. 10s.
Simposium Eisenerzeugung und Braunkohlen, Portoroz,
18-22 Sept. 1960. 603p. 1963. Metallurgisches Institut,
Ljubljana.
Symposium on iron and lignite production. Organized by
Union of Jugoslawika metallurgists and others.
Skrebtsoo, Aleksandr Makhailovich. Radio-isotope
study of the open-hearth process, xxvi, 141p. 1965.
Arnold, London. 42/-.
37

Smallman, R. E. Modem physical metallurgy. Ed. 2.
1963. Butterworths, Washington, D. C. $9.50.
Society of Naval Architects and Marine Engineers.
Guide for the selection of high strength and alloy
steels. 1964. The Society, N. Y. $2.
Sommer, F., 6 Plockinger, E. Elektrostahl-Erzeugung.
Ed. 2. xxiii, 558p. 1964. Verl. Stahleisen, Diisseldorf.
DM 78.
Electric furnace production.
Sorby Centenary Conference, 1963. Metallography,
1963. [iv], 332p. 1964. Iron and Steel Institute, London.
63s. (Special Rept. 80).
Staub, F., and otliers, eds. Atlas metalograficzny
struktur stal. 218p. 1964. Wydawnictwa Naukowo-
Techniczne, Warsaw. £3. 5s.
Metallographic atlas of steels.
Straschill, M. Modem practice in the pickling of
metals and related processes. Rev. ed. xii, 196p. 1963.
Robert Draper, Ltd. Teddington, England. $9.75.
Tallmann, Heinz. Was der Hochofner von seiner arbcit
wissen muss 1. Ed. 2. 204p. 1965. Verl. Stahleisen,
Diisseldorf. $15.80.
Blast furnace operator and his work.
Tarnovski, 1. Ya,, and others. Prakatka no Blyuminge.
389p. 1963. Metallurgizdat, Moscow. 1 R. 37k.
Rolling in the blooming mill.
Thouret, L. Use of ferrites at microwave frequencies.
107p. 1964. Ecole National Superieure d'Aeronatique,
Paris. $6.50. (Dist. by Macmillan, N. Y.)
Tietz, Thomas Edwin, ir Wilson, Jess W. Behavioi
and properties of refractory metals, xi, 419p. 1965. Arnold,
London. 90/-.
38

Trudeau, L. P. Radiation effects on toughness of
ferritic steels for reactor vessels. 179p. 1964. Rowman
& LittleBeld, N. Y. $9.65.
Turner, Cedric Edward. Introduction to plate and
shell theory, xii. 208p. 1965. American Elsevier, N. Y.
$6.50.
Turovtseva, 7,. A/., ed. Analysis of gases in meta
382p. 1961. Consultants Bur., N. Y. $21.50.
Tweeddale, J. G. Mechanical properties of metals.
328p. 1964. American Elsevier, N. Y. $7.75.
U. N. International symposium on the application
of modem technical practices in the iron and steel
industry to developing countries, 11-26, Nov. 1963.
3v. 1964.
United States Steel Corp. Making, shaping and
treating of steel. Ed. 8. Ed. by Harold E. McGannon.
xi, 1300p. 1964. The Corp., Pittsburgh. $12.50.
United Steel Companies, Ltd. Elements of rolling
practice. 164p. 1963. The Co., Sheffield.
Universal-Cyclops Steel Corp. Thermal shock testing.
5p. 1964. The Corp., Bridgeville, Pa.
Uzhik, G. V. Strength and plasticity of metals at
temperatures. 208p. 1961. National Lending Library
for Science and Technology, Goston Spa, Yorkshire,
England.
Vasipari, Kutato Intezet. A vasipari Kutat6 inteze
evknyve. 741p. 1964. Akademiai Kiadno, Budapest.
Communications of the Research Institute for Ferrous Metallurgy.
39

Verein Deutscher Eisenhuttenleute. Die physikalische
chemie der Eisen und Stahlerzeugung. 380p.
1965. Verlag Stahleisen, Diisseldorf. DM 24.
Physical chemistry of iron and steel production.
Wayman, C. M. Introduction to the crystallography
of martensitic transformations. 193p. 1964. Macmillan,
N. Y. $4.40.
Wepner, Wolfgang. Restwiderstands-messungen an
reinen Eisen. 23p. 1964. Westd. Verl. Koln. $12.50
DM. (Forsch. des Landes Nord.-Westfalen, no. 1447).
Residual resistance measurement in pure iron.
Willingheam, R. C, c* Williams, J. Quantitative assessment
of scaling and other steel surface effects during
heating in oil fuel furnaces. 15p. 1964. BISRA,
London. (Paper no. BIS/4/64.)
Yavoisku, V. /. Teoriya protsessov proizvodstva stali.
820p. 1963. Metallurgizdat, Moscow. 2r. 77k.
Theory of steel production processes.
IRON ORES
Louisiana Geological Survey. Bulletin,
No. 41: Iron ores of central North Louisiana. Baton
Rouge. $1.
Mines de Fer de Mauritanie, SA. Mauritanian iron
ore project. 74p. 1963. MIFERMA, Paris.
Sokolova, Elema Ivanovna. Physicochemical investigations
of sedimentary iron and manganese ores and
associated rocks (oxidation-reduction and acid-alkaline
plexes). 220p. 1964. Davy. $6.25.
40

WELDING
British Steel Castings Research Association. Recommended
procedure for the welding of steel castings by
the metal-arc process, vi, 18p. 1964. The Assn., Sheffield.
15/-.
Delattre, F. Le soudage des aciers inoxydables. x,
190p. 1964. Dunod, Paris. 24 Fr. fr.
Stainless steel welding.
Lueb, Heinrich. Kleine Werkstoffkunde fiir das
Schweissen von Stahl und Eisen. Ed. 4. 90p. 1964.
Dt. Verl. f. Schweisstechnik, Diisseldorf. 12 DM.
Material information for the welding of steel and iron.
Munse, W. II. Fatigue of welded steel structures.
210p. 1964. Welding Res. Council, N. Y. $9.
Rathbone, A. M., and others. Weldability of a high
toughness alloy plate steel with a minimum yield
strength of 140 Ksi. 56p. 1964. ASM., Metals Park,
Ohio. (ASM Tech. Rept. no. P-13-5-64).
UNITED STATES GOVERNMENT PUBLICATIONS
AD-604052: Properties of welded 18 Ni-7 Co-5 Mo
plate, by Z. P. Saperstein and B. V. Whiteson. 60p.
1964. OTS. HC $3., Mf $.75.
AD-604125: Random fatigue failure of a multiple
load path redundant structure. Rept. for 1 Sept. 62—31
Jan. 64, by A. S. Heller and others. 39p. 196-1 OTS.
HC $2., Mf $.50.
AD-604440: Fracture characteristics of structural
metals. Qtly. prog. rept. no. 1, 22 Jan.—22 April 64,
by M. F. Amateau and others. 93p. 1964. OTS. HC $3.,
Mf $.75.
•a

AD-604570: Fracture characteristics of structural
metals. Qtly. prog. rept. no. 2, 22 April—22 July 64,
by M. F. Amateau and E. A. Steigcrwald. 86p. 1964.
OTS. HC $3., Mf $.75.
AD-604867: Effects of composition variations on the
properties of 5 Ni-Cr-Mo-V steel. Tech. rept., by S. J.
Manganello and L. F. Porter. 46p. 1964. OTS. HC $2.,
Mf $.50.
AD-604868: Metallographic investigation of the factors
affecting the notch toughness of maraging steels.
Tech. rept. by A. J. Birkle and others. 58p. 1964.
CFSTI. HC $3., Mf $.50.
AD-604869: Feasibility of developing an Hy-180/210
weldment. Qtly. prog. rept. no. 4,1 April—30 June 64,
by L. F. Porter and others. 50p. 1964. OTS. HC $2., Mf
$.50.
AD-604870: Development of an Hy-130/150 weldment.
Qtly. prog. rept. no. 4, 1 April—30 June 64, by
L. F. Porter and others. 82p. 1964. OTS. HC $3., Mf
$.75.
AD-604871: Development of a drop-weight-bulge
test I. Tech. rept. by S. T. Rolfe and L. P. Connor.
20p. 1964. OTS. HC $1., Mf $.50.
AD-604S72: Effect of carbon on the hardenability
and mechanical properties of 5 Ni-Cr-Mo-V steel.
Techn. rept. by S. J. Manganello and L. F. Porter.
50p. 1964. OTS. HC$2., Mf $.50.
AD-604873: Formability of experimental Hy-130/
150 steels. Tech. rept, by S. T. Rolfe, 86p. 1964. OTS.
HC $3., Mf $.75.

AD-604874: Production and properties of 180 Ksi
minimum-yield-strength maraging steels. Tech. rept.,
by D. S. Dabkowski and others. 94p. 1964. OTS. HC
$3., Mf $.75.
AD-604876: Effects of low-temperature tempering
on the properties of .25 per cent carbon Ni-Cr-Mo
steels. Tech. rept. by S. J. Manganello and L. F.
Porter, 44p. 1964. OTS. HC $1., Mf $.50.
AD-604877: Effects of vacuum-consumable electrode
remelting on the properties of 12 Ni-5 Cr-3 Mo steel.
Tech. rept. by D. S. Dabkowski and L. F. Porter. 42p.
1964. OTS. HC $1., Mf $.50.
AD-60487S: Welding characteristics of production
5 Ni-Cr-Mo-V steel. Tech. rept. by L. P. Connor. 60p.
1964. OTS. HC $3., Mf $.75.
AD-604S79: Evaluation of miscellaneous experimental
HY-130/150 steels. Tech. rept., by D. S. Dabkowski
and others. 30p. 1964. OTS. HC $2., Mf. $.50.
AD-604985: Weld cracking in submarine steels. Final
rept. by R. E. Travis and C. M. Adams, Jr. 126p.
1964. OTS. HC $4., Mf $.75.
AD-604994: Evaluation of vacuum arc melted vascojet-1000,
by H. O. Ewing. 6p. 1960 [1964J OTS.
HC $1., Mf $.50.
AD-605217: Application of Iamb waves to the examination
of steel strip for laminar defects, by H. P.
Hatch and K. A. Fowler. 30p. 1964. OTS. HC $2.,
Mf $50.
AD-605286: Development of welding procedures
and filler materials for joining high strength low alloy
43

steels. Rept. for June 63 — June 64, by J. M. Faulkner
and others. 266p. 1964. OTS. HC $6., Mf $1.25.
AD-605375: Tests of machined high-strength steel
spherical shells subjected to external hydrostatic
pressure. Res. and dev. rept. by Albert E. Dadley. 28p.
1964. OTS. HC $2., Mf $.50.
AD-605672: Investigation of the effects of stress
corrosion on high strength steel alloys. Rept. for
June 62 — Dec. 63, by Gary A. Dreyer and Wesley
C. Gallagher. 148p. 1964. OTS. HC $4., Mf $1.
AD-605881: Corrosion stability of low-carbon and
low-alloy steels in sea water, by G. G. Kosheler and
I. L. Rozenfeld. 24p. 1963. OTS. HC $1., Mf $.50.
AD-60650: Mechanical properties of metals and
their cavitation damage resistance. Tech. rept. 233-5,
by A. Thiruvengadam and Sophia Waring. 39p. 1964.
OTS. $2.
AD-60613S: Plastic design in high strength steel:
Experiments on high strength steel members, by Peter
F. Adams and others. 109p. 1964. OTS. HC $4.p
Mf $.75.
AD-60621S: Mechanical behavior of normalized cold
drawn AISI 4340 steel under biaxial stress and rapid
heating, by C. W. Austin, Jr. 99p. 1964. OTS. HC $3.,
Mf $.75.
AD-606257: Behavior of steel during pulsating
loading beyond the limit fluidity, by T. Sh. Chervis.
19p. 1963. OTS. HC $L, Mf $.50.
AD-60627S: Stress-rupture strength of steel in liquid
sodium containing oxygen, by V. I. Nikitin. 14p. 1963.
OTS. HC $1., Mf $.50.
44

AD-606564: Fracture toughness of D6AC steel
Shillelagh rocket motor case, by Robert N. Katz. 3p.
1964. OTS. HC $2., Mf $.50.
AD-606664: Evaluation of the precracked Charpy
test as a method of determining fracture toughness of
high strength steel alloys, by Keh Chang Wu and
Vito J. Colangelo. 50p. 1964. OTS. HC $2., Mf $.50.
AD-606696: In-depth embrittlement of simulated
pressure vessel wall of A302-B steel, by C. Z. Serpan,
Jr. and L. E. Steele. 4, 10, 4p. 1964. OTS. $1. (NRL
rept. no. 6151).
AD-606773: In-reactor studies of low cycle fatigue
properties of nuclear pressure vessel steel, by J. R.
Hawthorne and L. E. Steele, ii, 16, 4p. 1964. OTS. $2.
(NRL Rept. no. 6127).
AD-606884: Quantitative phase analysis in textured
materials, by Stanley L. Lopata and Eric B. Kula. 26p.
1964. OTS. HC $2., Mf $.50.
AD-607048: Fracture micromechanics in highstrength
steels and titanium. Rept. for 15 Dec.-15 May
64, by B. R. Banerjee and J. J. Hauser. 336p. 1964.
OTS. HC $7., Mf $1.75.
AD-607126: Influence of alloying elements on the
properties of steel, by M. P. Braun. 202p. 1964. OTS.
HC $6., Mf $1.25.
AD-607150: Investigation of remedial measures for
combating accelerated oxidation induced by vanadium
contamination. Rept. no. 2, by W. J. Greenert and L.
G. Richards. 19p. 1956, [1964] OTS. HC $L, Mf $.50.
45

AD-607188: Response of drag type structure to
blast, by L. A. Gore and J. J. O'Sullivan. 133p. 1953
[1964] OTS. HC $4., Mf $1.
AD-607236: Recrystallization kinetics of high purity
iron. Final tech. rept. for 1 Oct. 62—1 Oct. 63, by
E. J. Hughes and others. 33p. 1964. OTS. HC $.75,
Mf $.50.
AD-607314: Investigation of mechanism of failure
of high-strength materials. Pt. II: Effect of thickness
and tempering temperature on fracture appearance
transition temperature and critical fracture toughness
of high strength sheet steel. Tech. rept. no. 2 (final),
by Hal W. Maynor, Jr. and Ralph E. Blair. 56p. 1963.
OTS. HC $3., Mf $.50.
AD-607315: Investigation of mechanism of failure oi
high-strength materials. Pt. Ill: Comparison of fracture
toughness of high-strength sheet steel as determined
by compliance-gage and fracture-appearance
methods. Tech. rept. no. 2 (final), by Hal W. Maynor,
Jr. and Ralph E. Blair. 36p. 1963. OTS. HC $2.,
Mf $.50.
AD-607355: Polyurethane linings for steel fuelstorage
tanks, by J. R. Griffith and G. E. Rohl. 8,
14p. 1964. OTS. $.50 (NRL Rept. no. 6139).
AD-607390: Principles of magneto-heat treatment
of steel, by Roman Skorski. 39p. 1964. OTS. HC $2.,
Mf $.50.
AD-607494: New information on neutron embrittlement
relief of reactor pressure vessel steels, by L.
E. Steele and J. R. Hawthome. OTS. $1. (NRL rept.
no. 6160).
46

AD-607630: Pressure vessel design criteria. Semiannual
rept. for 1 Jan. — 30 June 59, by D. P. Fitzgibbon.
60p. 1959 [1964] OTS. HC $3., Mf $.75.
AD-607729: Thermomechanical treatments applied
to ultra-high strength steels. Prog. rept. no. 2, by D.
Kalish and S. A. Kulin. 43p. 1964. OTS. HC $2., Mf
$.50.
AD-607789: Strengthening iron-base alloys by shoc
waves. Rept. for 15 June 63—15 June 64, by B. G.
Koepke and others. 152p. 1964. OTS. HC $5., Mf $1.
AD-607902: GOST 2246-60 steel welding wire. 15p.
1964. OTS. HC $1., Mf $.50. (TT-64-71645).
AD-608120: Mechanics of iron inhibition during dis
solution of lithium fluoride clearages. Tech. rept. no.
3, by Marjorie S. Baskin and M. B. Ives. 34p. 1964.
OTS. HC $2., Mf $.50.
AD-608163: Tensile strength-hardness relationship
in thermomechanically treated steels, by Eric B. Kulo
and Albert A. Anctil. 29p. 1964. OTS. HC $.50, Mf
$.50.
AD-608334: Steel corrosion mechanisms; the growth
and breakdown of protective films in high temperature
aqueous systems, studies with 15% NaOH at 316C.
Interim rept., by M. C. Bloom and others. 18p. 1964.
OTS. HC $1., Mf $.50.
AD-608497: Development of dies for extrusion of
complex shapes of steel and refractory alloys. Final
rept. for July 62 — 30 June 64, by J. G. Hunt and
others. 133p. 1964. OTS. HC $4., Mf $1.
47

AD-608591: Fracture characteristics of structural
metals. Qtly. prog, rept., no. 3, 23 July — 22 Oct. 64,
by M. F. Amateau and E. A. Steigerwald. 28p. 1964
OTS. HC $2., Mf $.50.
AD-608891: Development of improved methods processes,
and techniques for producing steel extrusions.
Final rept. for April 58 — March 64, by L. M. Christensen.
339p. 1964. OTS. HC $7., Mf $1.75.
AD-608940: Metallurgical characteristics of high
strength structural materials. Qtly. rept. no. 5, May-
Aug. 64, by T. W. Crooker and others. 60p. 1964. OTS.
HC $1.50, Mf $.75.
AD-6091S5: Paramagnetic resonance absorption
spectra of divalent manganese and trivalent iron ir
calcite. Final rept., by James G. Constantine. 89p.
1984. OTS. HC $3., Mf $.75.
AD-609228: Improved method of determining metal
corrosion rate by weight loss. Rept. for May-Aug.
63, by E. S. Matsui. 19p. 1964. OTS. HC $.75, Mf
$.50.
AD-610293: Effect of thermomechanical treatment
on susceptibility to tempering brittleness, by L. G.
Sakvarelidze and F. N. Tavadze. 12p. 1964. OTS.
HC $L, Mf $.50.
AD-610299: High temperature arrangement for
testing long lasting strength and corrosion stability
of structural materials in liquid sodium, by V. I.
Nikitin. lip. 1965. OTS. HC $1., Mf $.50.
AD-610344: Tendency of steel toward corrosion
cracking in various media by F. F. Azhogin and Yu.
K. Pavlov. lOp. 1964. OTS. HC $1., Mf. $.50.

AD-610350: High strength steel by D. A. Prokoshkin.
25p. 1965. OTS. HC $1., Mf $.50.
AD-610358: Embrittlement of metals by organic
liquids. Qtly. rept. for 1 Sept. — 30 Nov. 64. 8p. 1965.
OTS. HC $1., Mf $.50.
AD-610399: Strain hardening properties of high
strength sheet materials. Mono. ser. for 16-19 Aug.
60, by Frank Larson and John Nunes. 43p. 1960.
[1965] OTS. HC $2., Mf $.50.
AD-610516: Cooperative program of fracture testing
of AISI-4340 steel plate: Charpy impact results. Mono.
ser., by E. E. Williams and F. R. Larson, lip. 1961
[1965] OTS. HC $1., Mf $.50. (WAL-MS-39).
AD-610551: Marine corrosion studies: Deep ocean
technology stress corrosion cracking, cathodic protection.
Interim prog. rept. no. 2, by B. F. Brown and
others. 51p. 1964. OTS. HC $3., Mf $.50. (NRL-
MR-1574).
AD-610652: Electrolytic method of brass plating
steel wire, by N. V. Sokolov and G. G. Burkov. 3p.
1965. OTS. HC $1., Mf $.50.
AD-610659: Unidirectional solidification in highstrength
steel castings. Mono, ser., by Paul J. Aheam
and Francis C. Quigley. 13p. 1964. OTS. HC $1.,
Mf $.50. (AMRA-MS-64-03).
AD-610750: Problems in the load-carrying application
of high-strength steels: a symposium sponsored by
the tripartite technical cooperation program (TTCP)
sub-group P on materials, working panel on metals
Oct. 26-28, 1964. 239p. 1964. OTS. HC $6., Mf $1.25.
(DMIC-210).

AD-610753: Mechanical properties of steels containing
low sulfur and phosphorus content, by Kenneth
D. Holmes. 9p. 1962 [1965] OTS. HC $1., Mf
$.50. (Mono. ser. no. 54).
AD-610793: Combining high-temperature plastic deformation
with hardening, by M. G. Lozinskii. 15p.
1965. OTS. HC $1., Mf $.50.
AD-610909: Heat-treatment of twinned iron crystal
by R. I. Garber and others. 5p. 1958 [1965] OTS.
HC $L, Mf $.50.
AD-611011: Effect of liquid sodium on relaxation
of stresses in steel, by V. I. Nikitin. lip. 1965. OTS.
HC $1., Mf $.50. (FTD-TT-65-123).
AD-611025: Thermomechanical treatments applied
to ultra-high strength steels. Prog. rept. no. 3, by D.
Kalish and S. A. Kulin. 30p. 1964. OTS. HC $2., Mf
$.50.
SEE ALSO: AD-607729.
AD-611092: Interface motion in phase transformations.
Bainite transformations in hypoeutectoid steels,
by R. H. Coodenow and others. 34p. 1965. OTS. HC
$2., Mf $.50.
AD-611105: Microstructure determination of molybdenum-chromium-vanadium
steel by magnetic analysis,
by Rudolph V. Ginangrande. 20p. 1964. OTS. HC
$.50. Mf $.50.
AD-611199: Discussion of the J. R. Low, Jr. paper
the deformation and fracture of iron, by R. W. Armstrong.
8p. 1961 [1965] OTS. HC $1., Mf $.50.

AD-611262: Comparison test of reinforcing steels,
by R. H. Carlson and J. P. Murtha. 108p. 1959 [1965]
OTS. HC $4., Mf $.75.
AD-611407: Effects of tempered nonmartensitic products
on the notch toughness and mechanical properties
of an HY-80 steel, by A. R. Willner and M. L.
Salive. 62p. 1965. OTS. HC $3., Mf $.75.
AD-611520: Sign of the magnetic hyperfinc field
in dilute iron alloys using the mossbauer effect, by
Norman Blum and Lee Grodzins. 5p. 1964. (AFOSR
65-0167).
AD-61153S: Development of superior steels for precision
gyro spin bearings. Final rept. for 3 Sept.—31
Dec. 60, by D. R. Poirier and others. 55p. 1964.
CFSTI. HC $3., Mf $.75.
AD-611799: Investigation on thermal and mechanical
stability of mold materials for steel castings. Interim
rept. for 28 June 63—27 June 64, by Charles
E. Bates and John F. Wallace. 48p. 1964. CFSTI.
HC $2., Mf $.50.
AD-611800: Control of cast grain size of steel
castings. Interim rept. for 16 Aug. 63—15 Aug. 64, by
P. Wieser and others. 82p. 1964. CFSTI. HC $3., Mf
$.75.
AD-611873: Fracture characteristics of structural
metals. Final rept. for 22 Jan. 64—22 Jan. 65, by M. F.
Amateau and E. A. Steigerwald. 126p. 1965. CFSTI.
HC $4., Mf $1.
AD-612010: Large booster weight comparison,
glass filament and steel, by Leo Schapiro and others.
28p. 1963 [1965] CFSTI. HC $2., Mf $.50.
51

AD-612123: Dendritic morphology of high-strength
steel castings, by Paul J. Ahearn and Francis C. Quigley.
15p. 1964. CFSTI. HC $1., Mf $.50.
AD-612462: Stress aging: a new treatment for alloys.
Pt. III. Effect on standard tensile properties of four
ultra-high-strength steels. Tech. rept., by R. H. Harrington.
38p. 1965. CFSTI. HC $1., Mf $.50.
AD-612620: Metallurgical characteristics of high
strength structural materials. Qtly. interim rept. no.
6, Sept.—Dec. 64, by W. S. Pellini and others. 97p.
1964. CFSTI. HC $2.25, Mf. $.75.
AD-612640: High energy rate forging development.
Final tech. rept. for Jan. 61—Sept. 64, by F. L. Parkinson.
162p. 1964. CFSTI. HC $5., Mf $1.
AD-612646: Steels for solid-propellant rocket-motor
cases. Rept. for July—Oct. 64, by Isaac Perlmutte and
Vincent De Pierre. 76p. 1965. CFSTI. HC $3., Mf $.75.
AD-612712: On second order strain accumulation in
torsion fatigue, by Maria Ronay. 60p. 1965. CFSTI.
HC $3., Mf $.75.
AD-613004: Oxidation of iron-aluminum alloys in
the temperature range 500-900C. Tech. rept., by F.
Saegusa and L. Lee. 29p. 1965. CFSTI. HC $1., Mf
$.75.
AD-613053: In-reactor fatigue tests of A 302-B steel
representing the Elk River reactor pressure vessel, by
J. R. Hawthorne and L. E. Steele. ISp. 1965. CFSTI.
HC $1.. Mf $.50.
AD-613159: Lubrication for the rolling of steel pipe,
by P. I. Chuiko and others. 5p. 1965. CFSTI. HC $1.,
Mf $.50.
52

AD-613160: On the problem of the nature of the
hardening of austenite steels, by V. I. Grigorkin. 6p.
1965. CFSTI. HC $1., Mf $.50.
AD-613261: Metal removal by electrochemical
methods and its effects on mechanical properties of
metals, by John A. Gurken. 36p. 1965. CFSTI $2.
(DMIC-213).
AD-613353: Strength of ductile metal motor cases.
Tech. rept., by G. Sachs and others. 43p. 1961 [1965]
CFSTI. HC $2., Mf $.50.
AD-613371: Interface motion in phase transformations
in iron and iron- 9 per cent nickel alloys, by
R. H. Goodenow and R. F. Hehemann. 40p. 1965.
CFSTI. HC $2., Mf $.50.
AD-613577: Mossbauer studies on iron in the perovskites
La 1-x Sr-x Fe 03 (0 < or = X < or =1.)
Condition for maximum resonance absorption peak in
a singleline Mossbauer absorption, by Uri Shimonv
and Jens M. Knudsen. 49p. 1965. CFSTI. HC $2..
Mf$.50.
AD-613644: Study of the mass effect and microsegregation
in a high-strength steel casting, by Paul J.
Aheam and Francis C. Quigley. 25p. 1964. CFSTI.
HC $L, Mf $.50.
AD-613652: Control of stress corrosion. Interim
rept. no. 2, by R. H. Wolff. 15p. 1965. CFSTI. HC
$.50, Mf $.50.
AE—155: Tests of neutron spectrum calculations
with the help of foil measurements in a D*0- and an
HrO- moderated reactor and in reactor shields of concrete
and iron, by R. Nilsson and E. Aalto. 23p. 1964.
53

AERE-Trans-1017: Studies on carbides in iron and
steel by electrolytic isolation. 4. Behavior of eemenute
during cold-working and annealing, by Thomoo Sato
and Taiji Nishizawa. lOp. [1965] BFS $.50.
ANL—6924: Nondestructive testing of brazed joints,
by Akira Kamo. 30p. OTS. $2.
AP-Note-418: Survey of strain-cycling data on typi
cal army-reactor vessel materials, by J. J. Waple. 9p.
1962 [1965] CFSTI. $1 (Cy).
Includes carbon steels.
APED-4773: Pressure vessel steel surveillance program
for General Electric power reactors, by F. A
Brandt. 55p. 1965 (65APE1).
BNL-7906: Calculations of the energy and migratio
characteristics of carbon and nitrogen in a-iron and
vanadium, by R. A. Johnson and others. 32p. 1964.
OTS. Cy $2.
BNL-7710: Interstitials and vacancies in a-iron,
by R. A. Johnson. 37p. 1962 [1965] OTS. Cy $2.
BNL-8418: Effect of neutron irradiation on precipi
tation of carbon in alpha iron, by A. C. Damask. 20p.
1964. OTS. Cy $1.
BNL-8435: Point defect calculations in «-iron, by
R. A. Johnson. 30p. 1964. OTS. Cy $2.
CEA-R-2485: Mesure des sections efficaces thermiques
d'absorption de I'Al, Cu, Mg, Fe et de Cu par
la methode doscillation, by Jean-Claude Carre and
Rene Vidal. 20p. 1964.
Measurements of thermal absorption cross sections of Al,
Me and Cu by the oscillation method.
54

CEA-R-2600: Problemes de corrosion aqueuse de
materiaux de structure dans les constructions nucleases,
by Henri Coriou and Lucien Grail. 71p.
1964. Centre d' Etudes Nuclcaires, Saclay.
Problems on the acqucous corrosion of structural materials
in nuclear engineering. Includes ferritic steels.
CON'F-543-17: Primary damage state in iron, by
J. R. Beeler, Jr. and D. G. Besco. 21p 1964. ORINS.
CONF-543-19: Displacement efficiency in iron by
J. R. Beeler and D. G. Besco. 14p. 1964. ORINS.
COO-623-102: Analysis of an interference technique
for thin film stress measurement, by Tatuichiro Nishiyama.
51p. 1964. OTS. Cy $3. (Tech. Rept. no. 34).
Thesis. Case Institute of Technology.
DMIC — Report.
No. 196: Hydrogen-induced, delayed brittle failures
of high-strength steels, by A. R. Elsea and E. E.
Fletcher. 154p. 1964. OTS. $3.
No. 197: Cracking in high-strength steel weldments,
a critical review, by P. A. Kammer and others. 94,
20p. 1964. OTS. $2.75. (AD-438432).
No. 200: Vacuum degassing in the production of
premium quality steels, by P. J. O'Reilly. 125p. 1964.
OTS. S2.75.
No.202: Effects of high pressure high-temperature
hydrogen on steel, by E. E. Fletcher and A. R. Elsea.
70p. 1964. OTS. $2.
DMIC-Memo-196: Report on the fourth maraging
steel project review, by A. M. Hall and J. E. Campbell.
17p. 1964.
99

DP-860: Stainless steel information manual for the
Savannah River plant. Comp. by W. C. Rion, Jr., v. 1.
Properties, v.p. 1964; v. 2: Fabrication. 176p. 1964.
OTS. v. 1. $3., v. 2. $4.
EUR-1819: Scanning microanalysis of low atomic
number elements in metals, by O. V. T. Ranzetta
and V. D. Scott.
EURAEC-882: Non-destructive welding research.
Qtly. rept. no. 9, July 1—Sept. 30, 1963. 35p. 1964.
OTS. Cy $2.
EURAEC-1097: Study on residual stresses generated
by the upward vertical welding process. Qtly. repts.
nos. 10-11, April 1—Sept. 30, 1964. 103p. 1964. OTS.
Cy$4.
EURAEC-1101: Development of a new determination
of the ductile-brittle transition temperature. Qtly.
rept. no. M-64-542-26150. No. 11, April 1—June 30,
1964, by H. C. van Elst. 41p. 1964. OTS. Cy $2.
EURAEC-1102: Study on plastic fatigue embrittlement
in reactor vessel steels. Qtly. rept. no. 2, April 1—
June 30. 1964. 46p. 1964. OTS. Cy $2.
EURAEC-1106: Welding of very thick steels. Qtly.
rept. no. 11, April 1—June 30, 1964. 228p. 1964. OTS.
Cy $6.
EURAEC-1151: Non-destructive welding. Qtly.
rept. no. 10, Oct. 1—Dec. 31, 1963. 25p. 1964. OTS.
Cy $1.
EURAEC-1152. Qtly. prog. rept. no. 11, Jan. 1
Mar. 31, 1964. 2Sp. 1964. OTS. Cy $2.
51 >

EURAEC-1166: Electro-slag weldings of reactor
steels. Tech. Qtly. rept. no. 12, April 1—June 30,
1964. 96p. 1964. OTS. Cy $3.
EURAEC-1192: Study of base metal to be used in
research on brittle fracture of large welded assemblies.
Qtly. rept. no. 1. 6p. 1964. OTS. Cy $1.
EURAEC-1195: Relation between twinning and
brittle fracture in iron and iron alloys, by E. Anderson
and J. Spreadborough. 45p. 1965. CFSTI. Cy $2.
EURAEC-1207: Study of the embrittlement by plastic
fatigue of steel used by reactor vessels. Qtly. rept.
no. 3, July 1—Sept. 30, 1964. 48p. 1964. OTS. Cy $2.
EURAEC-1209: Study of base metal to be used in
research on brittle fracture of large welded assemblies.
Qtly. rept. no. 2. 5p. 1964. OTS. Cy $1.
EURAEC-1217: Development of a new determination
of the ductile-brittle transition temperature. Qtly.
rept. no. M-64-890-26150, by H. C. van Elst. 41p. 1964.
OTS. Cy $2.
EURAEC-121S: Effect of radiation on the ductilebrittle
transition in pressure vessel steels. Qtly. rept.
no. xv, July 1—Sept. 30, 1964, by E. Anderson and
others. 44p. 1964. OTS. Cy $2.
EURAEC-1227: Welding of very thick steels. Qtly.
rept. no. 12, July 1—Sept. 30, 1964. 32p. 1964. CFSTI.
Cy$2.
EURAEC-1228: Stainless steel cladding of very
thick steels. Qtly. rept. no. 1, July 1—Sept. 30, 1964,
20p. 1964. CFSTI. Cy $1.
57

EURAEC-1237: Studies on the corrosion of steels
in high-temperature water and steam. Qtly. rept. no. 9,
July 1—Sept. 30, 1964, 48p. 1964. OTS. Cy $2.
EURAEC-1242: Electro-slag welding of reactor
steels. Qtly. rept. no. 14, July 1—Sept. 30, 1964. 93p.
1964. OTS. Cy $3.
EURAEC-1243: Research to determine the longterm
mechanical properties of metals subjected to
mechanical stress at elevated temperatures and neutron
irradiation. 7th Qtly. rept., by W. Siegfried and
S. Zimering. 52p. OTS. Cy $3.
EURAEC-1273: Determination of trace-elements in
iron samples by neutron-activation techniques. Tech.
rept. no. 2. 54p. 1964. OTS. Cy $3.
EURAEC-1275: Study of elementary cracking. Preliminary
qualification study of welding procedure.
Qtly. rept. no. 8, Oct. 1—Dec. 31, 1964. 9p. 1965.
CFSTI. Cy $1.
EURAEC-1276: Study on plastic fatigue embrittlement
in reactor vessel steels. Qtly. rept. no. 4, Oct. 1—
Dec. 31, 1964. 40p. 1965. CFSTI. Cy $2.
EURAEC-1280: Study of joints welded in very thick
steel plates. Qtly. rept. no. 2, Oct. 1—Dec. 31, 1964.
lOp. 1965. CFSTI. Cy $1.
EURAEC-1284: Development of a new method to
determine the brittle-ductile transition in steel. Report
no. M64-1227-26150, Nov. 1963—Nov. 1964, by
H. C. van Elst. 45p. 1964. OTS. Cy $2.
EURAEC-1308: Corrosion studies on steels in water
and steam at high temperature. Qtly. prog. rept. no. 10,
Oct. 1—Dec. 31. 1964. S2p. 1965. CFSTI. Cy $3.
58

EURAEC-1318: Influence of nitrogen in iron and
steel under fast neutron irradiation. Qtly. rept. no. 5,
Oct.l—Dec. 31, 1964, by F. Rossi. 28p. 1965. CFSTI.
Cy$2.
EURAEC-1343: Effect of radiation on the ductilebrittle
transition in pressure vessel steels. Qtly. rept.
no. 16, Oct. 1, 1964—Jan. 31, 1965, by E. Anderson
and others. 35p. 1965. CFSTI. Cy $2.
GA-5273: Effects of irradiation on a 302B steel
subjected to a multiaxial stress distribution, by T. A.
Trozera and P. W. Flynn. 23p. 1964. OTS. Cy $1.
GA-5636: Effects of neutron irradiation on materia
subjected to multiaxial stress distributions. Final rept.,
by T. A. Trozera and others. 78p. 196-1. OTS. Cy $3.
GEAP-4490: Electron beam microprobe studies of
oxidation behavior of iron-chromium-nickel system
in high-temperature steam: I: Trace interpretation
techniques, by E. G. Brush, iv, 53p. 1964. CFSTI. $3.
HW-75065: Subsurface discontinuities in N-reactor
carbon steel pipe welds. 37p. 1964. OTS. $1.
HW-SA-3770: High-speed testing, by R. G. Hoag-
Iand. 15p. [1964]) OTS. Cy $1.
A-302B steel is tested.
IS-985: High-field De Haas-Van Alphen effect in
iron and nickel whiskers, by A. V. Gold. lOp. 1963.
OTS. Cy $1.
IS-1016: Thermal diffusivity measurements with
radial sample geometery, by R. L. Carter and P. H.
Sidles. 6p. 1964. OTS. Cy $1.
59

IS-1105: Analysis of a Damascus steel by neutron
and gamma activation, by A. F. Voigt and A. Abu-
Samra. 12p. 1965. CFSTI. Cy $1.
KAPL-3031: Fracture toughness determinations of
A302-B and Ni-Mo-V rotor steel with various-sized
specimens, by D. F. Mowbray. 26p. 1964. OTS. Cy $2.
KAPL-3088: Fracture-toughness determinations of
A302-B and Ni-Mo-V forging steel with various-sized
specimens. Pt. II, by D. F. Mowbray and K. Minassian.
25p. 1964. CFSTI. Cy $1.
KR-79: Qtly. prog. rept. April-June 1964. 38p. 1964
Describes operation and development of th* VEEP, NORA
and JEEP II reactors. Includes studies of the corrosion of
mild steel in water and describes a new corrosion test loop.
LA-3215: Overdriving effect in dynamic polymorphism
by T. R. Loree and others. 20p. 1964. CFSTI.
Cy $2.
Three materials were: the binary alloy 20 wt. % nickel in
iron, and 4340 steel of various hardnesses.
MCW-1487: Equilibrium structures in the high uranium
iron alloy system. Topical rept. by J. A. Straatmann
and N. F. Neumann. 26p. 1964. OTS. Cy $2.
MG/E/10/64: Fracture toughness—a summary of
the present position, by W. E. Duckworth, lip. 1965.
British Iron and Steel Research Assn., London.
MRC-4S9: Iron single crystal preparation. Pt. II:
Preparation of the crystals and a study of their mechanical
and electrical experiments on the use of the
electrotransition of electron-beam zone refined irons.
Final rept., April 2, 1963—April 1, 1964, by E. J.
Hughes and others. 64p. 1965. CFSTI. $3. Cy.
GO

MSAR-61-42: Effect of 1200°F sodium on austenitic
and ferritic steels. Pt. 1: Physical properties of materials.
Pt. 2: Thermal shock. 7p. 1961, [1965] OTS.
Cy $1. (Prog. Rept. 7).
MSAR-61-60: Progress Rept. 8. 6p. 1961 [1965]
OTS. Cy $1.
MSAR-61-105: Progress Rept. no. 13. 6p. 1961
[1965] OTS. Cy $1.
MSAR-61-114: Progress Rept. no. 14. 29p. 1961
[1965] OTS. Cy $2.
MSAR-65-47: Effect of high temperature sodium
on austenitic and ferritic steels. Physical properties
of materials. Prog. rept. no. 55. 15p. 1965. CFSTI.
Cy $1.
NAA-SR-Memo-9866: Status report of aluminum/
steel radiator condensor test program, R/C-10, by W.
P. Engle. 41p. 1964. OTS. Cy $2.
NAA-SR-Memo-10704: Static structural test of the
aluminum steel radiation condenser (R/C-10), by W.
P. Engle. 25p. 1964. CFSTI. Cy $1.
NAEC-AML-1759: Hydrogen embrittlement susceptibility
of a high strength steel containing uranium,
by Edward J. Jankowsky. 9p. 1963. OTS. $1.10.
(AD-421434).
NASA Contractor reports no. 217: Operation of
forced circulation, Croley 9M, mercury loop to study
corrosion product separation techniques, by D. B.
Cooper and E. J. Fargo, viii, 96p. 1965. CFSTI. $4.
NASA-TN-D-2599: Fracture toughness testing, by
John E. Srawley and William F. Brown, Jr. 66p. 1965.
CFSTI. $3.
(il

NASA-TN-D-2659: Electron-bremsstahlung differential
cross sections for thin and thick targets, by
W. Wayne Scott. 58p. 1965. CFSTI. $3.
NASA-TN-D-2782: Backscattering and secondaryelectron
emission from metal targets of various thicknesses,
by Allan J. Cohen and Kenneth F. Koral. 34p.
1965. CFSTI. $2.
NASA-TN-D-2899: Fatigue of four stainless steels
and three titanium alloys before and after exposure to
550*F (561"K) up to 8800 hours, by Walter Illg and
Claude B. Castle. 57p. 1965. CFSTI. $3.
NLCO-923: Sink-reduction of heavy-walled steel
tubes, by Herbert Davis and Herbert W. Hesselbrock.
16p. 1964. CFSTI. Cy $1.
NRL-6160: New information on neutron embrittlement
and embrittlement relief of reactor pressure vessel
steels, by L. E. Steele and J. R. Hawthorne. 34p.
1964. OTS. Cy $2.
NRL-6179: Yankee reactor pressure vessel surveillance:
evaluation of specimens exposed during the
second core, by C. Z. Serpan and others. 16p. 1964.
OTS. Cy $1.
NRL-6258: Metallurgical characteristics of high
strength structural materials. Qtly. rept. no. 6, by W. S.
Pellini and others. 95p. 1964. CFSTI. $2.25.
NRL-Memo-1351: Irradiation effects on structural
materials. Qtly. prog. rept. no. 1, May 1—June 31,
1962, by L. E. Steele and J. R. Hawthorne. 14p. OTS.
Cy $1.

NRL-Memo-1468: Irradiation effects on structural
materials. Qtly. prog. rept. Aug. 1—Oct. 31, 1963, by
L. E. Steele and others. 33p. 1963. [1965] OTS. Cy $2.
NRL-Memo-1556: Irradiation effects on reactor
structural materials, by L. E. Steele and others. 40p.
1964. OTS. Cy $2.
ORNL-3679 [p.84-7]: Electrochemical kinetics and
its application to corrosion. [4p. 1964] OTS. Cy $4.
(set).
ORNL-3705: Mossbauer studies of the hyperfine
structure spectra of 57 Fe in FeRh alloys Fe£h and
FeNH* (SOi)i. 12HrO, by D. W. Forester. 104p.
1964. OTS. Cy $4. (Thesis).
ORNL-P-556: Effect of irradiation on precipitatio
of nitrides in iron by J. T. Stanley. 17p. 1964. OTS.
Cy$l.
ORNL-P-594: Comparison of the thermal conductivity
electrical resistivity, and Seebeck coefficient of
a high-purity iron and Armco iron to 1000°C. by J. P.
Moore and others. 29p. 1964. OTS. Cy $2.
ORNL-RM1C-2: Preparation of high purity single
crystals from electron beam zone refined iron, by E.
J. Hughes and P. W. Barton, p. 10-16. 1964.
ORNL-RSIC-7: Tabulated values of scattered gamma-ray
fluxes in iron interpolated from momentsmethod
calculations, by D. K. Trubey. 85p. 1965.
ORNL. Gratis.
ORNL-tr-406: Experiences in welding large thicknesses
of steel, by Miroslav Hauner. 18p. 1964. JCL.
Ph $1.60, Mf $.80.

ORNL-tr-407: Examples of the application of electroslag,
welding in large dimensional construction,
by Josef Becka. 13p. 1964. JCL. Ph $1.60, Mf. $.80.
PAN-527/XVII: Polarographic investigation of gar*
ma-radiation induced oxidation of iron (II) in neutral
aqueous solution, by Zbigniew P. Zagorski. 37p. 1964.
PG-Report-516: Analytical methods for the analyse
of uranium mono-and dicarbides (the determination
of iron, nickel and molybdenum) 28p. 1964. BIS. $1.
RT/CHI (64)-ll: Detenninazione per assorbimento
atomico di tracce di metalli in composti organici, by
C. Bordonali and others. 21p. 1964.
RTD-TDR-63-4050: Evaluation of high strength
steel forgings, by R. L. Jones and F. C. Nordquist. xiii,
142p. 1964. OTS. $3.
SGAE-IB/IA-5/1964: Determination of boron h
steel by neutron activation depression, by H. Spenke
and others. 7p. 1960 [1965].
SP-5012: Effects of low temperatures on structural
metals: 55p. 1964. $.55.
SWRI-1228-31: Study of methods of initiating a
crack in the PM 2A vessel. Special rept. by C. E.
Lautzenheiser. 27p. 1964. OTS. Cy $2.
SWRI-122S-37: Studies of the fatigue strength ol
pressure vessels. [1] Cyclic pressure tests of large size
pressure vessels. [2] Low cycle fatigue testing of onehalf
scale model pressure vessels. [3] Effect of weld
defects on the fatigue strength of A302B steel. Prog.
rept. no. 10, by A. C. Pickett and others. 43p. 1964
OTS. Cy $2.
64

SWRI-1228-43: Prog rept. no. 11, by A. G. Pickett
ind others. 68p. 1964. OTS. Cy $3.
SWRI-1228-51: Prog. rept. no. 12, by A. G. Pickett
ind others. 41p. 1965. CFSTI. Cy $2.
SWRI-1228-54: Evaluation of the serviceability of
[he Elk River reactor pressure vessel. Prog. rept. no. 9,
Oct. 1—Nov. 30, 1964, by Jose McDonald, Jr. and
Paul D. Watson. 8p. 1965. OTS. Cy $1.
SWRI-1228-57: Prog. rept. on tests of large pressure
vessels. Jan. 18—March 18, 1965, by Andres G.
Pickett, lip. 1965. CFSTI. Cy $1.
Cyclic pressure tests were made of large steel pressure vessels.
SWRI-1243-14 (a): Development of non-destructive
testing instrumentation for reactor pressure vessels.
Qtly. rept. no. 6, April 1—July 10, 1964, by John R.
Barton and Robert D. Wylie. 88p. 1965. CFSTI. Cy $3.
(EURAEC-1345).
TID-20387: Angular distribution of Gamma-rays
produced by fast neutron in-elastic scattering in Fe,
by R. W. Benjamin and others. 21p. 1959 [1965] OTS.
Cy$l.
TID-21011:Studies of the fatigue strength of pressure
vessels. 1. Cyclic pressure test of large size pressure
vessels. 2. Low cycle fatigue testing of one-half
scale models pressure vessels. 3. Effect of weld defects
on the fatigue strength of A302B steel. Prog.
rept. no. 9, by A. J. Pickett et al. 36p. 1964. OTS. $2.
TID-21143: Optimum conditions for heat-treated
steels, by Huai-Pu Chu. 73p. 196?. OTS. $3.
Thesis. Colo. School of Mines.
65

TID-21221 (p. 111-154): Causes of embrittlementin
steels for nuclear reactor vessels, by Jean Sebille.
[43p.] 1964. OTS. Cy $5. (set).
TID-21326: Annealing of stress anisotropy in thin
iron films. Tech. rept. no. 32, by J. Riesenfeld. 38p.
1964. OTS. Cy $2.
TRG-Report-511: Application of the equivalent dose
and temperature concepts to irradiation-induced
changes in the mechanical properties of steel, by
H. Bridge and B. T. Kelly. 20p. 1963 [1965] BIS $.70.
UCRL-10981: Potentiality of ausform steels for prestressing,
by V. F. Zackay and W. W. Gerberich. 28p.
1963. OTS. $2.
UCRL-11520: Structure and strength of some ausformed
steels, by G. Thomas and others. 78p. 1964.
OTS. Cy $3.
UCRL-11538: Nuclear and magnetic resonance
studies in S-state ions, [thesis] by H. Hollis Wickman.
157p. 1964. OTS. $5.
UCRL-11569: Elevated temperature strain aging of
conventional and ausform steels, by Virendra Singh
Goel. Thesis. 75p. 1965. CFSTI. Cy $3.
UCRL-11575: Vapor pressure determination of manganese
activities in iron-manganese alloys, by Prodyot
Roy. 90p. 1964. OTS. Cy $3. [Thesis].
UCRL-12029-T: Diffusion in magnetic materials, by
R. J. Borg. 15p. 1964. OTS. Cy $1.
UCRL-12223: Maraging steel. A bibliography, by
Penelope Bloom. 51p. 1964. CFSTI. Cy $3.
Covers period 1962-Oct. 1964.

ZFK-RN-27: Bestimmung Schncller Neutronspektren
in Eisen Mittels Schwelwertdetktoren, by Karlheinz
Faehrmann. 81p. 1964.
Determination of fast neutron spectra in iron by means of
threshold detectors.
U. S. AREA REDEVELOPMENT ADMINISTRATION
Pertinent characteristics of iron and steel industry
as related to area redevelopment, by John A. Flory.
v, 57p. 1965. U. S. Supt. Doc. $.25.
U. S. OFFICE OF AEROSPACE RESEARCH
Air Force Cambridge Research Laboratories
Special reports
No. 19: Study of ferromagnetic crystals by parallel
pumping, by James C. Sethares and Frank A. Olson.
ix. 117, 6p. 1965. CFSTI. (AFCRL-65-64).
U. S. CENSUS BUREAU
Current Industrial Reports
Commercial steel forgings, summary for 1964. 3p.
1965. $.15. (Series M33C(64)-13).
Inventories of steel mill shapes, summary for 1964.
2p. 1965. (Series M33-3(64)-13).
Steel mill products, 1963, change sheet, lp. 1965.
Iron and steel castings; summary for 1964. 2p. 1965.
The Bureau. $.15. (M33-l(64)-13).
U. S. DEPARTMENT OF COMMERCE
Office of Technical Services
TT: 64-31793: Theoretical bases of chemical heat
treatment of steel, USSR, by A. A. Popov. 2, vii, 133p.
1964. OTS. $2.75. (JPRS-25521).
67

TT:64-31796: Use of computer for calculating chem.
ical composition of iron being poured from mixer into
converter, USSR, by K. S. Garger and others. 2,5p. 1961.
OTS. $.50. (JPRS-25524).
TT: 64-41033: Algorithm for use with digital process
control computers for determining time at which blowout
should stop when given carbon content is reached
in Bessemer converter, USSR, by K. S. Garger and
others. 2, 8p. 1964. OTS. $1. (JPRS-25762).
TT: 64-41597: Phase transformations in iron-vanadium
system, USSR, by M. T. Zakharova et al. 2, 6p.
1964. OTS $1. (JPRS-26338).
TT: 64-51215: Carburizing and heat treatable steels
DI-2, DI-3, DI-3A (EP-176) and DI-4, USSR, by M.
F. Alekseyenko and others. 2, 7p. 1964. OTS. $1.
(JPRS-26959).
TT: 64-51371: Vacuum diffusion welding of metals
and electroslag welding of alloy steels, USSR. 2, a,
21p. 1964. OTS. $1. (JPRS-27115).
TT: 64-51840: Methods of increasing strength of
structural stels and alloys, USSR, by L. K. Gordiyenko.
2, 20p. 1964. OTS. $2. (JPRS-27636).
TT: 64-51880: Die steels and titanium alloys for
hot stamping, USSR. 2, a, 15p. 1964. OTS. $1. (JPRS-
27715).
TT: 64-51968: Conformities of tendency of steel to
brittle fracture at high and low temperatures, USSR,
by A. V. Stavynkovich. 2, lOp. 1964. OTS. $1. (APRS-
27905).
TT: 65-30154: Investigations of steel and alloys,
USSR. 2, a, SOp. 1965. OTS. $3. (JPRS-28358).

IT: 65-30314: Properties of heat-resisting steels
for heat and power engineering, USSR. 2, a, 77p.
1965. OTS. $3. (JPRS-28725).
TT: 65-30421: Welding austenitic steels and alloys,
USSR, by B. I. Medovar. 2, a-c, 139p. 1965. OTS. $4.
(JPRS-28963).
TT: 65-30472: Maraging steels and alloys, USSR.
2, a, 34p. 1965. OTS. $2. (JPRS-29054).
TT: 65-30520: Steels in power machinery, USSR. 2,
a, 23p. 1965. OTS. $1. (JPRS-29139).
TT-65-31355: Use of gold-iron electrode pair for
electrochemical recording of tissue oxygen in vivo, by
I. P. Berezin and others. 2, 4p. 1965. OTS. $1 (JPRS-
30818).
TT: 65-31722: Studies in structure of tungsten and
molten iron, cobalt and nickel borides, USSR. 2, a,
lOp. 1965. OTS. $1. (JPRS-31225).
U. $. GEOLOGICAL SURVEY
Professional Papers
No. 377: Ore deposits of St. Lawrence County magnetite
district, northwest Adirondacks, N. Y., by B. F.
Leonard and A. O. Buddington. ix, 260p. 1964. $10.
No. 498-C: Relation of electrochemical potentials
and iron content to ground-water flow patterns, by
William Bock and Kvan Barnes, iii, 16p. 1965. U. S.
Sup. Docs. $1.
U. S. BUREAU OF LABOR STATISTICS
Bulletin
Indexes of output per man-hour, steel industry,
1957-63. 1, iii, 17p. 1964.

U. S. BUREAU OF MINES
Bulletins
No. 628: Sulfur poisoning of fixed beds of iron catalysts
in Fischer-Tropsch synthesis, by R. B. Anderson,
et al. iii, 16p. 1965. $.20.
Information Circular
No. 8236: Reconnaissance of iron resources in Arizona,
by C. M. Harrer. xii, 204p. 1964.
No. 8243: Iron and steel scrap in Pacific Northwest.
by Gary A. Kingston. 5, 50p. 1964. $.35.
No. 8264: Brown iron ore resources, Quitman Co..
Ga.. by James F. O'Neill. 3, 29p. 1965.
Minerals Yearbook
Preprint, 1963
Iron and steel, by Robert A. Whitman. 2, 30p. $.15.
Iron and steel scrap, by Robert A. Whitman. 2, 25p.
1964. $.15.
Iron ore, by Horace T. Reno. 2, 31p. $.15.
Report of Investigations
No. 6495: Heats and free energies of formation of
sulfides of manganese, iron, zinc and cadmium, by
L. H. Adami and E. G. King. 3, lOp. 1964.
No. 6523: Experimental production and smelting of
prereduced iron ore pellets, by M. M. Fine and others.
2. ii. 28p. 1964.
No. 6532: Flotation treatment of experimental iron
ore tailing from Champion mine. Marquette Range,
Mich., by Roy T. Sorensen and others. 3, 13p. 1964.
70

No. 6564: Iron ore pellet binders from lignite deposits,
by M. M. Fine and W. C. Wall. 2, ii, 18p. 1964.
No. 6580: Recovery of scandium from uranium plant
iron sludge and from wolframite concentrates, by J. R.
Ross and C. H. Schack. 2, ii, 22p. 1965.
No. 6596: Recovery of manganese from open-hearth
slags and low-grade ores by smelting and selective
oxidation, by R. C. Buehl et al. 33p. 1965.
No. 6647: Removing copper from copper-clad steel
by oxidation, by R. J. Leary. 3, 12p. 1965.
No. 6649: Study of chlorination kinetics of german
ium, silicon, iron, tungsten, molybdenum, columbium
and tantalum, by Arne Landsberg and Frank E. Block.
3, 26p. 1965.
No. 6650: Lake Superior iron resources preliminary
sampling and metallurgical evaluation of central Mesabi
nonmagnetic (aconites, by L. F. Heising and D. W.
Frommer. 3, 28p. 1965.
U. S. NATIONAL BUREAU OF STANDARDS
Review of Selected USGRD Reports
No. 101: Hot machining (means of lower cost turning
and milling of hard steels and super alloys.) 9p.
1964. OTS. $.50.
Miscellaneous Publications
No. 260-3: Standard reference materials: Metallography
characterization of NBS spectromctric low-alloy
steel standard, by R. E. Michaelis and others, vi,
17p. 1964. $.20.
71

No. 260-6: Standard reference materials; methods
for chemical analysis of white cast iron standards, by
J. I. Shultz. iv, 62p. 1965. $.45.
U. S. NAVY DEPARTMENT
Progress Report
No. 1807: Factors influencing the fatigue life of an
Hy-80 composition steel fully quenched and tempered
to various strength levels, by A. R. Willner and M. L
Salive. 29p. 1964.
U. S. SHIP STRUCTURE COMMITTEE
SSC Seriei
No. 162: Exhaustion of ductility and brittle fracture
of E-steel caused by prestrain and aging, by C. Mylonas.
4, 35p. 1964.
No. 166: Reversed-bend tests of ABS-C steel with
as-rolled and machined surface, by K. Satch and C.
Mylonas.
No. 167: Restoration of ductility of hot or cold
strained ABS-B steel by heat treatment at 700 to 1150°
F. by C. Mylonas and R. J. Beaulieu. 3, 22, 2p. 1965.
No. 168: Rolling history in relation to toughness of
ship plate, by B. M. Kapadin and W. A. Backofen. 3,
10, 2p. 1965.
72

REVIEW OF IRON A N D STEEL
LITERATURE FOR 1966
A CLASSIFIED LIST OF THE MORE
IMPORTANT BOOKS. SERIALS AND
TRADE PUBLICATIONS DURING THE
YEAR; WITH A FEW OF EARLIER
DATE NOT PREVIOUSLY ANNOUNCED
By ESTHER CHESIRE and MARJORIE McCLELXAND
Science tad Technology Department, Carnegie Libiaiy o( Pittsburgh
Reprinted from
"The Blast Furnace and Steel Plant"
August 1967 - December 1967
CARNEGIE LIBRARY OF PITTSBURGH
]QB8

CARNEGIE LIBRARY
OF PITTSBURGH
A free public library donated by
Andrew Carnegie and maintained by
(he City of Pittsburgh.
A supplemental appropriation by the
County of Allegheny provides for free
sen-ice to County residents.

Review of Iron and Steel Literature for 1966
THIS BIBLIOGRAPHY, the fiftieth annual Review
of Iron and Steel Literature compiled for the
Blast Furnace awl Steel Plant, attempts to list
books, technical reports, and pamphlets published
during 1966, with some of earlier date not included
in previous issues.
When possible, the compilers have examined the
publications listed. In some cases they were not accessible,
and the only information regarding them was
in technical journals and publishers' announcements;
unfortunately this information is not always accurate
or complete for bibliographic purposes. Prices are difficult
to verify and may vary from one source to
another so that those listed may be inaccurate in
some cases.
The Science and Technology Department, Carnegie
Library of Pittsburgh, receives the non-secret,
research and development reports issued by the
Atomic Energy Commission (AEC), the National
Aeronautics and Space Administration (NASA), and
many other publications from various government
agencies. Complete translations and abstracts of articles
appearing in numerous foreign language journals
are received in the department.
Designated as a partial depository for atomic energy
reports from Canada, Great Britain, and Denmark, it
also receives publications from Germany, Israel, Italy,
Japan, the Netherlands. Spain, Sweden, and Switzerland.
This list is concerned only with separately pub-
3

lished books, reports, and pamphlets. It is highly
selective and makes no attempt to be all inclusive.
Much of the important literature relating to the
metallurgy and technology of iron and steel, including
raw materials, properties, processing, production, and
applications, appears in current periodicals and journals
which may be approached through guides such
as:Applied Science and Technology Index, British
Technology Index, Chemical Abstracts, Engineering
Index, International Aerospace Abstracts, Journal of
the Iron and Steel Institute, Review of Metal Literature
(now incorporated with Metallurgical Abstracts
as Metals Abstracts), and other abstracting and indexing
services.
Comprehensive indexes of United States government
publications currently available for reference
are the Monthly Catalog of U. S. Government Publications,
Scientific and Technical Aerospace Reports,
Nuclear Science Abstracts, U. S. Government Research
and Development Reports, and the Government-Wide
Index to Federal Research and Develo)m\ent Reports.
The Department provides photocopies, accessibility
to reports and journals, and reference assistance
in locating material. Comprehensive lists of
books and journal articles may be found and literature
searches conducted by means of the abstracts, indexes
and bibliographies available in the Department.
The compilation of the Review of Iron and Steel
Literature was undertaken as a project by the Science
and Technology Department. Published from the beginning
in Blast Furnace and Steel Plant, the bibliography
first appeared in volume 6, pages 33-35, of the
January 1918 issue. At that time, it was stated, this

"brief list of books and serials . . . includes only the
more important ones published in English during
1917, with a few which appeared in 1916." The introduction
further notes that the war influence reduced
the number of foreign publications that year. The compilation
originated with Mr. E. H. McClelland, Technology
Librarian, who compiled and edited the work
until his retirement in 194S. After that Mr. Morris
Schrero compiled the Review during 1949-1950 followed
by Mr. Victor Polansky for the years 1951-1956
and Miss Esther E. Chcsire from 1956-1966.
Meanwhile the Science and Technology Department
was building one of the most comprehensive libraries
on ferrous metallurgy in the country aided by considerable
financial assistance from the Association of Iron
and Steel Engineers and the Pittsburgh Section, American
Chemical Society for the purchase of reference
materials. As the Review increased in coverage along
with the expanding collection, requests for it came
from many different countries.
This bibliography could not have continued for half
a century without its initial publication each year in
Blast Furnace and Steel Plant; and its reprinting is
made possible by the editors of this journal who generously
supply their type for Carnegie library's print
shop. The Science and Technology Department is most
grateful for their continuing cooperation, advice, and
kindness over the years.
Daniel R. Pfoutz. Head
Science and Technology Department
Carnegie Library of Pittsburgh
5

CONTENTS
Automation and Computers 7
Codes—Standards 7
Corrosion—Protective Coatings 11
Design and Construction 14
Economics. History. Statistics. Directories,
Education 19
Foundry 27
Iron Ores 30
Metallurgy, Refractories, Testing, Working 30
Welding 60
United States Government Publications 62
Miscellaneous Translations ....112

AUTOMATION AND COMPUTERS
British Iron 6- Steel Researcli Association. Automation
Conference, Scarborough, Oct. 31-Nov. 1, 1963.
132p. 1964. Federation, London. [PE/Conf. Proc/4/
64]
Farmer, J. A. Planning and scheduling a steelworks
by electronic computer. 26p. 1962. BISRA, London.
OR/CA/17/62.
Pellike, Robert D. and Sinnott, Maurice J., eds.
Computer applications in metallurgical engineering, ix,
122p. 1964. American Society for Metals. Metals Park,
Ohio. $6.25.
Reutter, F. Betriebssysteme fiir Datenverarbeitungsanlagan.
Tagung vom 29. Juni 1965 in Haus der
Technik, Essen. 32p. 1965. Vulkan-Verl, Essen. 9.60
DM.
Management system for sequential computers.
Reutter, F. Prozessrechnen und ihre Andwendung in
Hiitten-und Kraftwerken, Tagung vom 24 Man* 1965
in Haus der Technik, Essen. 46p. 1965. Vulkan-Verl.,
Essen. 14 DM.
Process computer and its use in iron and power plants.
Schwab, Gunter. Rechenbuch fiir den Huttenfacharbeiter.
Ed. 2. 148p. 1966. Verl. Stahleisen, Diisseldorf.
14.80 DM.
Computer text for the foundry metallurgist.
CODES - STANDARDS
American Society for Testing and Materials.
1966 Book of ASTM Standards.
Pt. 1: Steel piping, tubing, and fittings, xvii, 656p.
1966. $11. (Members $7.70).

Pt. 2: Ferrous castings, xiv, 327p. 1966. S8. (Members
$5.60).
Pt. 4: Structural steels, xix, S99p. 1966. $13. (Members
$9.10).
Beratungsstelle fur Stahlverwendung in Zusammenarbeit.
IPE-Trager Mattelbreite Trager nach Euronorm 19.
Ed. by H. P. Witt and Rolf Oberschur. 69p. 1965. Verl.
Stahleisen, Diisseldorf. 9.S0 DM.
IPE-Carrier. Average width carrier European standard 19.
British Standards Institution.
No. 264: 1965: General requirements for the arc
welding of steel to B.S. 96S and similar steels.
1st. rev. 46p. 1965. 12/6.
No. 778: 1966: Specification for steel pipes and
joints for hydraulic purposes. 15p. 1966. 12s 6d.
No. 1121: 1966: Methods for the analysis of iron
and steel.
Pt. 1: Sulphur in iron and steel: Gravimetric. 2nd.
rev. 6p. 3/-.
Pt. 12: Silicon in acid resisting high silicon iron:
Gravimetric. 1st. rev. 6p. 3/-.
Pt. 13: Chromium in iron and steel. 8p. 2/-.
Pt. 16: Methods for the analysis of iron and steel.
Rev. 7p. 1966. 3s.
Pt. 22: Tin in ferro-tungsten and tungsten metal:
Volumetric. 1st. rev. lp. 3/-.
Pt. 44: Manganese in ferro-manganese and related
alloys: Volumetric. Sp. 3A.

Pt. 45: Phosphorus in iron and steel: Photometric.
9p. 4/-.
Pt. 46: Zirconium in steel: Gravimetric. 7p. 3/-.
Pt. 47: Titanium in iron, steel and permamagnet
alloys: Photometric. 9p. 4/-.
Pt. 48: Molybdenum in iron and steel: Photometric.
8p. 3/-.
Pt. 49: Boron in ferro-boron: Volumetric. 7p. 1966.
4/-.
No. 1202: Pt. 1: Steel nails. 1966. 10s.
No. 1501: 1964: Specifications for steels for fired
and unfired pressure vessels, plates. 45p. 1964.
l£5s.
No. 2569:
Pt. 2: 1965: Specification for sprayed metal coatings.
Protection of iron and steel against corrosion
and oxidation at elevated temperatures.
13p. 5s.
No. 2910: 1965: Recommendations for the radiographic
examination of fusion-welded circumferential
bolt joints in steel pipes.
No. 3889: Methods for non-destructive testing of
pipes and tubes.
Pt. 3A: Penetrant testing of ferrous pipes and
tubes. 9p.
Pt. 4A: Magnetic particle flow detection: Ferrous
pipes and tubes. lOp. 1965. 4s 6d each.
No. 3915: 1965: Specifications for carbon and low
alloy steel pressure vessels for primary circuits of
nuclear reactors. 84p. 1965. £2.

No. 3917: Pts. 1-3: Methods for the analysis of man
ganese ores.
Pt. 1: Manganese dioxide (active oxygen).
Pt. 2: Total Manganese.
Pt. 3: Iron.
7p. 1965. 4s each pt.
No. 3920: 1965: Method of certifying elevated-temperature
proof or yield-stress properties of steel
products by selective testing.
CP 2008: 1966: Protection of iron and steel structures
from corrosion. 205p. £2.
Deutsclter Normenausschuss. Werkstoffnormen Stahl
und Eisen. 1964. Beuth-Vertrieb. Berlin 38 DM.
Material standards for steel and iron, 4 Part A, 20th ed.
Frischherz, Adolf und Domayer, Rudolf. Maschinenclemente.
Einfuhrung, Normung, Industriewerte. Ed.
2, Pt. 1. Verbindungselemente. 186p. 1965. Hanser,
Munich. 34 DM.
Machine parts. Introduction, standardization, industrial
values. Ed. 2, Pt. 1. Connecting parts.
Glen, J. and Johnson, R. F. Elevated temperature
yield and 0.2% proof stress properties of carbon steel
plates with particular reference to the values specified
in B.S. 1501: 1964. 27p. 1965. BISRA, Sheffield (Paper
no. MG/Q/1/65).
Goottsch, IL and Hasenjager, S. Technische Baubestimmungen:
Hochhau, Tiefbau, Baulenkung, Wiederaufbau.
Ed. 5, Pt. 27. 1966. Rudolf Miiller. Cologne.
DIN Standard. Technical building regulations: Structural
engineering, civil engineering, works control, reconstruction.
Pt. 27: Hollow block*, wind action, specification* for structurtl
steelwork.
10

Japan, Ministry of International Trade and Industry,
Agency of Industrial Science and Technology, Standards
Division. Iron and steel industry and its standardization
in Japan. 48p. 1965. Agency, Tokyo, Japan.
Kollbrunner, C. F. Fiir Brandbelastungen bis zu 20
kg/m' muss der Stahl das Feuer nicht fiirchten. 95p.
1965. Verlag Schweizer Stahlbau-Vereingung, Zurich.
14 Swiss fr.
For fire loads up to 20 kg/m1 steel need not fear fire.
Verein Deutscher Etsenhuttenleute. Kurznamen und
Werkstoffnummem der Eisenwerkstoffe in DIN-Normen
und Stahl-Eisen-Werkstoffblattem. Ed. p. 1964.
DM 10.
Abbreviations and reference numbers for iron and steel
materials in the German standard system.
Woolman, J. and Mottram, R. A., comps. Mechanical
and physical properties of the British Standard on
En steels, v. 2: En 21 to En 39. xx, 488p. 1966. £7/7/-.
CORROSION - PROTECTIVE COATINGS
Bakhvalov, G. T., et al, eds. Corrosion and protection
of metals, xvi, 322p. 1965. Pergamon, Oxford.
£4 10s.
Berg, Frank F. Korrosionschaubilder. 41p. 1965.
VDI. Verl. Diisseldorf. 17.80 DM.
Corrosion diagrams.
Butler, G. and Ison, IL C. K. Corrosion and its
prevention in waters. 281p. 1966. Reinhold, N. Y. $12.
Canada Dept. of Mines and Technical Surveys.
Technical Bulletin. No. R-167: Corrosion fatigue of
structural metals in mine shaft waters, by G. J. Biefer.
25p. 1965.
Includes tests on 4 alloy and carbon steels.
11

Ceskoslovenka Vedecko-Technicka Spolecnost Vy.
zkummy Ustav Hutnictvi Zeleza. Symposium uber
korrosionsbestandige Stahle, Praha, 10-13, 9, 1961.
547p. 1963. Praha. 39, 50 DM.
Symposium on corrosion-resistant steel.
Colloque de Metallurgie, 8th 1964. Corrosion sous
con train te, ruptures differees, fatigue-corrosion et relations
entre ces phenomenes. 144p. 1965. Presses Universitaires
de France, Paris.
Stress corrosion, delayed failures, fatigue-corrosion and
relations between these phenomena. Ed. by Institute National
des Sciences et Techniques Nuclcaires; Centre d" Etudes Nudeaires
de Saclay.
Highway Research Board. Record: 140: Corrosion
and protection of metals. (4 reports) 56p. 1966. $1.20.
Hoare, W. E., et al. Technology of tinplate. xii,
420p. 1965. Arnold, London. £8 8s.
Hoare, W. E. Weissblech-IIandbuch. Wissenswertes
fiir Kaufer und Verbraucher. 2nd German ed. 62p.
1965. Zinn-Informationsburo, Diisseldorf. 62s.
Tinplate handbook.
Horn, Willi. Mcssen und Prufen von Oberllachen.
64p. 1964. Dt. Verlagsanst., Stuttgart. 10 DM.
Surface examination and testing.
International Congress on Metallic Corrosion, 2nd,
1963. Proceedings, [vi], 97Sp. 1966. National Assn.
Corrosion Engineers, Houston, Texas. $50.75.
International Nickel Co. Korrosionsbestaudigkeit
der austenitischen Chrom- Nickel -Stahle bei hohen
Temperaturen. 32p. 1965. International Nickel Deulschland,
Diisseldorf.
Corrosion resistance of austenitic chrome-nickel steels s'
high temperatures.

Kolbel, Joachim. Die Nitridschichtbildung bei der
Glimmnitrierung. 19p. 1965. Westdt. Verl. Koln. 10.50
DM. (Forsch. Landes Nordrheim Westfalen, no.
1555).
Nitride coating structure with nitriding glow.
Likhtman, V. L, et al. Der Einfluss grcnzflachenaktiver
Stoffe auf die Deformation von Metallen, xii,
237p. 1964. Akademie Verl., Berlin. M D M 36-.
Influence of surface active materials on metal deformation.
Mishra, Baikuntha Nath. Cber den Einfluss des
Kohlenstoff-und-S ticks toff gehaltes sowie der Warmebehandlung
auf die interkristalline Spannungsrisskorrosion
nicdriglegierte Stahle. 52p. 1965. Bergakad,
Clausthal.
Dissertation. Influence of carbon and nitrogen concentrations
under heat treatment of intercrystalline stress corrosion of
low-alloy steel.
Morgan, /. //. Protection cathodique dans la lutte
centre la corrosion. Theorie et pratique. 420p. 1966.
Dunod, Paris. 78 Fr. fr.
Cathodic protection in the fight against corrosion. Theory
and practice.
National Cooperative Highway Research Program.
Report No. 23: Methods for reducing corrosion of
reinforcing steel. 22p. 1966. $1.40.
Pfizer, Chas 6- Co., Inc. Chemical cleaning with
citric acid solutions. 4, [iv]p. 1960. The Co., Brooklyn,
N. Y. (Data sheet no. 557).
Deals with reactions on irons and iron oxide.
Pourbaix, M. Lessons in electrochemical corrosion.
86p. 1966. Centre Beige d'Etude de la Corrosion,
Brussels. (Tech. rept. no. 91).
13

Protection of Metals, v.l. Jan.-Feb. 1965. Consultants
Bur., N. Y. $80.
Translated from Zashchita Metallov.
Rosener, Karl Heinz. Das Korrosionsverhalten austenitischer
Chrom-Nickel-Stahle in Phosphorsaure.
87p. 1965. Techn. Hochsch., Munchen.
Corrosion behavior of austenitic chrome-nickel-steels in
phosphates.
Shea, E. P. and Hollingsliad, W. R. Corrosion in
carbon steel heat transfer surfaces. 130p. 1965. United
States, Office of Saline Water. Supt. of Docs., Washington,
D. C. $.65. (Saline water research and development
progress report, no. 166).
Society of Automotive Engineers. Iron and Steel
Technical Comm. Prevention of corrosion of metals.
SAE-J447a. Handbook supp. 17p. 1964. SAE, N. Y.
Spring, Samuel. Preparation of metals for painting.
31Sp. 1965. Reinhold, N. Y. $12.
TenJiaven, Ulrich. Ein Beitrag zur Untersuchung
des kathodischcn Schutzes von Zink auf Stahl. 24p.
1965. Bergakad, Clausthal.
Dissertation. Contribution on the investigation of cathodic
protection of zinc and steel.
Tomashov, N. D. Theory of corrosion and protection
of metals. The science of corrosion, xxx, 672p.
Macmillan, N. Y. $19.95.
Zaremski, D. R. Corrosion resistance of automotive
stainless steels. ISp. 1965. A.S.M., Metals Park. Ohio.
DESIGN AND CONSTRUCTION
Aclie, J. B. Acier et architecture. 142p. 1966. Arts &
Metiers Graphiques, Paris.
Steel and architecture. Published under the auspices of the
Technical Office for the use of Steel.
1-1

American Institute of Steel Construction. Manual of
steel construction. (Ed. 6] 750p. 1965. A.I.S.C., N. Y.
$7.
American Iron and Steel Institute. Tentative criteria
for structural applications of steel cables for buildings.
9p. 1967. The Institute, N. Y.
Beratungsstelle fur Stahlverwendung. Stahlerne
Strassenbruoeken. 50p. 1966. The Author, Diisseldorf.
(Merkblatt no. 380).
Steel highway bridges.
Bohringer, R., et al. Durchfuhrung von Anfahrversuclien
an Leitplanken zur Erziclung einer moglichst
hohen Verkehrssicherheit an Bundesfemstrassen. 94p.
1965, German Ministry of Transport.
Execution of collision tests on safety fences for achieving
the best possible road safety condition on German Federal
Truck Roads. Steel safety fences gave best results because of
elasticity and strength.
British Steel Producers Conference and British Iron
and Steel Federation. Steel designers' manual. Ed. 3.
1966. Crosby Lockwood. London. 75s.
Canadian Institute of Steel Construction. Properties
of shapes, plates, bars, and tubes. Ed. 2. 192p. 1965,
fcI963J The Institute, Toronto.
Carpentier, L. La construction metallique dans les
chemins de fer. 166p. 1965. Centre des Hautes Etudes
de la Construction, Paris. 35 Fr. fr.
Steel construction in railway engineering.
Chambre Suisse de la Construction Metallique.
Charpentes metalliques. Poids. 118p. 1965. Verlag
Schweizer Stahlbau-Vereinigung, Zurich. 29 Swiss Fr.
Steel-framed structures. Weights.
Daniels, Stuart R. Inelastic steel structures. 195p.
1966. U. of Tenn. Pr., Knoxville. $7.50.
15

Duval, Claude. Structure et direction des enterprises
de construction metalliques. 130p. 1965. Centre
Technique Industriel de la Construction Metallique,
Paris. 28 Fr. fr.
Structure and management of structural steelwork undertakings.
European Coal and Steel Community High Authority.
Stahlkongress, 1964. Fortschritte im Stahlbauwesen,
Luxemburg, 1964. 716p. [1965] The author,
Luxemburg.
Steel Congress. 1964. Progress in steel construction.
Faber, Oscar. Constructional steelwork simply explained.
Ed. 5. 133p. 1966. Oxford. Fairlawn, N. J.
$4.80.
Faltus, F. Pinostenne ocelove mosty tramove. 565p.
1965. Nakladatelstvi Ceskoslovenske Akademie VED.
Kes 44.50.
Web plate girder steel bridges.
Gregor, A. Der praktische Stahlbau-Berechnung der
statisch bestimmten Tragwerke. 730p. 1966. VEB. Verlag
fiir Bauwesen, Berlin.
Reissue of 1961 ed.
Practical steel construction. Analysis of statically determinate
structures.
Halperin, Don A. Building with steel; design, detailing
and erection. [Ed. 2] 267p. 1966. American Tech.
Soc, Chicago. $6.
Handbuch fur den Stahlbau. v. 1. 524p. 1965. VEB
Verlag fiir Bauwesen, Berlin. 42 MDN.
Steel construction manual.
Haus der Technik. Konstruieren mit gusswerkstoffen.
Tagung von Nov. u. Dec. 1965. 29p. 1966. Vulkan
Verl., Essen. 8 DM. (Vortrags. h.65).
Construction with cast iron raw materials.
16

Stahlkonstruktionen fiir den Strassenverkehr. 50p.
1966. Vulkan Verl., Essen. 12 DM (L.55).
Steel construction for highway traffic.
Heide, II. Praktische Statik nach Cross, Steinmann
und Kani. Ed. 3. 230p. 1966. Teubner, Leipzig DM
18.50.
Practical structural analysis according to Hardy Cross,
Steinmann and Kani.
Holtzhausen, Paul. Kleine Stahlkunde fiir den Maschinenbau.
96p. 1965. V.D.E., Diisseldorf. 4 DM.
(Monographien iiber Stahlverwendung, h.25).
Brief steel information for mechanical engineering.
Houy, A. Calcul des ouvrages en palplanches metalliques.
116p. 1965. Sidelor, Metz, France. 20 Fr. fr.
Design of steel sheet pile structures.
Johnston, Bruce G., ed. Guide to design criteria
for metal compression members. Ed. 2. xvii, 217p.
1966. Wiley, N. Y. $10. (Mich. U. Engineering Fd.
Column Research Council).
Kienert, Georges. Constructions metalliques rivees
soudees; livre III: Les charpentes. 194p. 1965. Publ.
Eyrolles. 37 Fr. fr.
Riveted and welded steel structures; book III: Frame works.
Kirsch, Helmut. Technische Mineralogie. Angewandte
Mineralogie fiir Ingenieure und Techniker. 211
p. 1965. Vogel-Vert, Wurzburg. 16.80 DM.
Technical mineralogy. Applied mineralogy for engineer and
technician.
McKaig, Thomas B, Applied structural design of
buildings. Ed. 3. viii, 499p. 1965. McGraw-Hill, N. Y.
$17.50.
Makowski, Zygmant Stanislao. Steel space structures.
2I4p. 1965. M. Joseph, London. 95s.
17

Massonnet, C. E. and Save, M. A. Plastic analyse
and design: v. 1: Beams and frames. 379p. 1965. Blaisdell,
N. Y. $10.50.
Mittag, Martin, ed. Stahlbau; eine Zusammenstellung
neuer Erkenntnisse sowie Ausfiihrungsbeispiele
zur Stahlverwendung im Hochbau mit den deutschen
technischen Stahlbau-Bestimmungen. 237p. 1963.
Deutscher Bauzentrum, Dermoid. (Schriftenreine
Kontruktionsgrundlagen und Konstruktionsberspiele,
v. 1.).
Steel construction; compiled analysis of new knowledge at
well as illustrated designs on steel applications in building
construction with the German technical steel construction code
Polakotvski, N. H. and Ripling, E. J. Strength and
structure of engineering materials. 535p. 1966. Prentice-Hall,
Englewood Cliffs, N. J. $17.35. (Text ed
$13.).
Siegel, Curt. Les formes structuralcs de l'architecture
modeme. 30Sp. 1965. Editions Eyrolles, Paris. 77
Fr. fr.
Structural forms of modern architecture.
Statische. Tabellensammlung. 448p. 1966. Werner
Verlag, Diisseldorf. 24 DM.
Collected structural tables. Ed. 12.
Turner, William Witt. Elements of graphic statics;
with applications to structural steel design. 95p. 1966.
Ronald. $4.50.
Verein Deutscher Giessereifachleute und Fachgruppe
Konstruktion, Verein Deutscher Ingenieure. Konstruieren
mit gusswerkstoffen. 466p. 1966. Gicsserei-
Verlag. Diisseldorf. 35 DM.
Construction with cast materials.
Vonsovskii, S. V., ed. Ferromagnetic resonance.
350p. 1965. Pergamon. N. Y. $10.
18

ECONOMICS, HISTORY, STATISTICS, DIRECTORIES,
EDUCATION
Agency of Industrial Science and Technology, Ministry
of International Trade and Industry. Iron and
steel industry and its standardization in Japan. 48p.
1965. The Author, Tokyo.
Alexander, William Oliver, ed. Metallurgical achievements.
ix 330p. 1965. Pergamon, N. Y. $12.75.
American Iron and Steel Institute. Charting steel's
progress during 1965. 63p. 1966. The Institute, N. Y.
$0.50.
American Iron and Steel Institute. Committee on Industrial
Health. Occupational health practices. Iron
and steel industry. 95p. 1965. The Institute, N. Y.
American Iron Ore Association. Iron ore, 1965. 135p.
1966. The Assn. Cleveland, Ohio.
American Metal Market. Metal statistics. 1966 ed.
400p. 1966. The Author, N. Y. $5.
Ammer, Dean S., et al. Mechanization and manpower
in gray-iron foundries, v, 234p. 1966. Northeastern
U., Bur. of Business and Economic Research, Boston.
Associacao Brasileira de Metais. 20 anos dc progresso
metalurgico. v.p. [1964] Assoc. Sao Paulo.
Twenty years of metallurgical progress.
Bonnekamp, Horst. Untersuchung des Einflusscs des
Kapazitat auf die Betriebskosten von Hochofenanlagen.
llSp. 1966. Techn. Hochsch., Aachen.
Dissertation. Investigations on the influence of capacity on
operating costs of a blast furnace installation.
British Iron and Steel Federation. Statistical handbook,
1964. 2 v. 1965. The Federation. London. 63s.
19

British Iron and Steel Research Association. Opera.
tional Research Dept. First twenty years operational
research by R. H. Collcutt. 97p. 1965. The Assn., 20s.
British Steel Founders' Association. Steel Foundry
costing. HOp. 1965. Gee, London. 37s 6d.
C.R./.F. Centre de recherchcs scientifiques et techniques
de l'industrie des fabrications metalliques. 48p.
1966. C.R.I.F. Brussels.
Scientific and Technical Research Center of the Metal Fabrication
Industry. (Annual Report for 1965).
Confederation of British Industry. Iron and steel
bill. 2, 12p. 1966. The Confederation, London. 2/-.
Cordero, Harry G., ed. Iron and steel works of the
world. Ed. 4. 850, [I]p. 1965. Metal Bulletin Books,
London. $22.35.
De Kun, Nicolas. Mineral resources of Africa. 740p.
1965. Elsevier, N. Y. $40.
Duval, Claude and Gamier, Edmond. Comptablite,
prix de revient, et devis en construction metallique.
190p. 1965. Centre Technique Industriel de la Construction
Metallique, Paris. 40 Fr. fr.
Accounting, costing and estimating in steel construction.
European Coal and Steel Community. Investment in
the community coal mining and iron and steel industries:
report. 92p. 1966. E.C.S.C. Luxembourg. 17/6.
European Coal and Steel Community. Steel Congress
1964, Luxembourg. Progress in steel construction
work. 716p. 1965. H.M.S.O., London. £5/8/.
European Coal and Steel Community. High Authority.
Steel Congress, 1965. Technical terms. (English
French, German, Dutch, Italian glossary) v.p. 1965.
The Author, Luxembourg.

Freeman, Henry G. Pocket dictionary-iron and steel.
2v. [311, 289p.] 1966. Hueber, Munich. About $3.20
each.
Gale, W. K. V. Black Country iron industry, a technical
report. 192p. 1966. Iron and Steel Institute, London.
100s.
Grandin, Friedricli-Hans, Einfluss der Losgrosse auf
die Wirtschaftlichkeit von Walzenstrassen. 189p.
Techn. Hochsch., Aachen.
Dissertation. Influence of lot size on the economics of rolling
mill trains.
Great Britain Commonwealth Economic Committee,
Intelligence Branch. Iron and steel and alloying metals;
a review. 221p. 1965. Her Majesty's Stationery Office,
London. $3.
Institution of Metallurgists. Management and cost
control in the metallurgical industry. Lectures. Refresher
course. 105p. 1964. Iliffe, London. £1. 5s.
Instrument Society of America. Proceedings. Fifteenth
national I.S.A. conference on instrumentation
for the iron & steel industry, Pittsburgh, Pa., 1965.
v.p. 1965. The Society, Pittsburgh. $8. (Members S6).
Proceedings. Sixteenth—1966. v. p. 1966. $10. (Members
$7).
Iron and Steel Board and British Iron and Steel
Federation. Joint Comm. on Statistics. Iron and steel:
annual statistics for the United Kingdom, vii, 164p.
1966. The Authors, London. 15/-.
Iron and Steel Holding and Realization Agency. Report
and statement of accounts, 1964-1965. 19p. 1966.
H.M.S.O., London. 2/-.
21

Iron and Steel Institute. Pilot plants in the iron and
steel industry. 351p. 1965. The Institute, London.
(Special report 96) $14.
Japan Iron 6- Steel Federation. The steel industry
of Japan. 29p. 1965. Federation, Tokyo, Japan.
Joint Conference on the Physical Properties of Martensite
and Bainite, Scarborough, 1965. Report of the
proceedings. 211p. 1965. Iron and Steel Institute. £5.
Klein, Martin. Einfuhrung in die DIN Nonnen.
5th ed. vi, 545p. 1965. Teubner, Stuttgart. 27.S0 DM.
Introduction to DIN standards.
Kravis, Irving Bertuird, et al. Measuring international
price competitiveness: a preliminary report.
18], 40p. 1965. National Bureau of Economic Research,
N. Y. S1.75.
Includes chapter on iron and steel products.
Lauersen, W'alther. Stahlwirtschaftlicher Landerhericht.
II. II. Spanier. x, 176p. 1966. Institut fiir Weltwirtschaft
an der Universitat, Kiel. 22 DM.
Statistical review of natural resources and production facilities
for the manufacture of iron and steel in Spain.
Leckebusch, Guntlier. Die Bezieehungen der deutschen
Seeschiffswcrften zur Eisenindustrie an der Ruhr
in der Ziet von 1S50-1930. 149p. 1963. Rheinisch Westfiilischen
Wirtschaftsarchiv, Koln. 9.50 DM. (Schriften...
YVirtschaftsgeschichte, bS).
Connection of the German naval shipyards with the iron
industry neat the Ruhr, 1850-1930.
Leitner, Franz and Plockinger, Erwin. Die Edelstahlcrzeugung.
Schmelzer, Giessen, Pfiifen. Ed. 2.
xvi, 477p. 1965.
High grade steel production. Smelting, casting, testing
22

Lindemann, Gerhard. Uber Betriebsgrosse und
Standort moderner Eisenhiittcnwerke unter Beriicksichtigung
von Neuanlagen in iibersceischen Gebieten.
119p. 1965. Techn. Hochsch., Aachen.
Dissertation. Important management and modern position
of ironworks in consideration of new installations in transoceanic
legions.
Mach, Manfred. YY'irtschaftliche Materialtransporte
in Neuzeitilichcn Stahlwerken. Berechnung und Betrieb.
144p. 1965. Kraussk*»ff-Verl., Mainz. 29.80 DM.
Economic transportation of materials in modern steel production.
Cost study and management.
Manuel des usines Europeennes de la Siderurgie.
Ed. 5. 1, 442p. 1965. Montan- und VVirtschaftsverlag,
Frankfurth-on-Main (Gennany) 109 DM.
Manual of European iron and steel works.
Marcus, Hermann and Oppenlander, Karlheinz. Eisen
und Stahlindustrie. Strukturelle Probleme und
Wachstumschancen. 145p. 1966. Duncker & Humblot,
Berlin. 28.60 DM. (Struktur und Wachstum. Reihe Industrie,
h.14).
Iron and steel industry. Structural problems and growth
outlook.
Max-Planck-Institut fur Eisenforschung. Bericht
uber die Jahre 1962-1964. 276p. 1965. Verl. Stahleisen,
Diisseldorf. 39.60 DM.
Report for 1962-1964.
Metal Finishing guidebook directory, 1966. Ed. 34.
7S6p. 1966. Metals and Plastics Pub., Westwood, N. J.
$2.50.
Metal Statistics, 1966. Ed. 59. 400p. 1966. American
Metal Market, N. Y. S5.

Michaelis, Hans, Der Einfluss umsatzsteuerlicher
ausgleichseinrichtungen auf die Wettbewerbsnerhallinsse
im gemeinsamen Markt, untersucht am Beisiel
des deutsch-franzosischen Stahlmarktes. 90p. 1965.
Verl. Stahleisen, Diisseldorf. 10.80 DM.
Effect of the tax exchange or the compensation trends on
competition in the common market; investigation into example
in the French-German steel market.
Nicholls, Henry George. Forest of Dean: a historical
and descriptive account, and, iron making in the
olden times. 402p. 1966. David J. Charles, Dawlish.
50/-.
Nicholls, Henry George. Iron making in olden times.
Rev. ed. with Forest of Dean. 286, 82p. 1966, Taplinger,
N. Y. $11.50.
Nunninghoff, Rolf. Einfluse der Herstellungsbedingungen
auf die Verwendbarkeit werzinkter Stahldrahte.
59p. 1965. Tech. Hochsch.. Aachen.
Dissertation. Influence of production requirements on the
utilization of galvanized steel wire.
Odenliausen, Helmuth and Steinert, Otto, eds. Ereignisse
in Stahl. Ein Bildband 7 gez. 136p. 1965. Verl
Stahleisen, Diisseldorf. 36 DM.
Steel achievements. Illustrations.
Organisation for Economic Co-operation and Development.
Iron and Steel Comm. Iron and steel industry
in 1964 and trends in 1965. 61p. 1965. OECD,
Paris. 10 F.
Organisation for Economic Co-operation and Development.
Iron and Steel Special Committee. Iron
and steel industrv: a study. 56p. 1965. H.M.S.O., London.
15/-.
Includes notes on Canada, U. S. and Japan.

Pelou, Maurice. Nomenclature de la technique des
metaux. v.p. [1965] Editions Science et Industrie,
Paris.
v. 1: Tableau Synoptique des Acieries Fransaises et
de leurs productions.
v. 1: Metals technology nomenclature. Synoptic '.ables of
French steels and their production.
Pounds, Norman John Greville. Geography of iron
and steel. Rev. ed. 192p. 1966. Hutchinson, London.
25s. (10s 6d paper).
Ransom, James M. Vanishing ironworks of the Ramapos.
3S2p. 1966. Rutgers U. Pr., New Brunswick, N. J.
S10.
Rupp, Hans-Joachim. Entwicklungstendenzen in der
internationalen Schrottwirtschaft. 227, xxip. 1964.
Wirtschafts-w Sozialwiss Fak Koln.
Dissertation Univ. Koln. Development outlook in the scrap
metal economy.
Schriftenreiclie des Wirtscluiftsvereinigung. Eisen
und Stahl industrie zur Wirtschafts-und Industriepolitik.
7 vol. 1962-1964. Verl. Stahleisen, Diisseldorf. v. 1,
3.60 DM; v. 2, 3.10 DM; v. 3, 4.30 DM; v. 4, 7 DM;
v. 5, 7.90 DM; v. 6, 8.20 DM; v. 7, 10.80 DM.
Iron and steel industry. Industrial and political economy.
Seiko, Ed. Die Eisen-und Stahl-und NE-Metal-Industrie
und ihre Heifer, v. p. 1966. Industrieschau-Verlagsges,
Darmstadt. 19 DM.
Iron and steel and NE metal industry and its assistant.
Selka, Kurt, ed. ABC edition 1966. Europe production.
Austria, Belgium, Bulgaria, Denmark, Finland,
France, Germany, Holland, Hungary, Italy, Luxembourg,
Norway, Poland, Rumania, Sweden, Switzerland,
Yugoslavia, v. p. 1966. Europe Export, Darmstadt.
39.90 DM.
25

Sorby Centennial Symposium on the History of
Metallurgy, Cleveland 1963. The Sorby Centennial
Symposium on the History of Metallurgy, Cleveland,
Ohio, October 22-23, 1963, edited by C. S. Smith.
55Sp. 1965. Gordon and Breach, N. Y. $29.00. (Metallurgical
Society Conferences v. 27).
Stellwaag, A. Vom Raderwerk der Eisenbahn. Eine
Studie uber das Wirken deutscher gemeinschaftsorganisationcn
bei der Lieferung von Radsatzen und
Radsatzteilen, 1850-1950. 12Sp. 1965. Hestra-Verl.
Darmstadt. 36 DM.
Railroad wheels, a study of the German community organization
operation cargo principle and distribution.
Stursberg, E. Erwin. Geschichte des Hutten- und
Hammcrwescns im ehemaligen Herzogtum Berg.
120p. 1964. Stadtarchiv Remscheid, Remscheid (Beitriige
zur Geschichte Remscheids H.8) 4.20 DM.
History of metallurgy and forging practice in the old duchy
Berg.
Thier, Manfred. Geschichte der Schwabischen Hiittenwerke.
Ein Beitrag zur wiirttembergischen Wirt.
schaftsgeschichte, 1365-1802. 360p. 1965. 27 DM.
History of Swabian ironworks. A part of the Wurtembcrg
economic history.
Tripp, Basil Howard. The Joint Iron Council, 1945-
1966: the origins and history of the Council and its
constituents, the Council of Iron Producers and the
Council of Iron Foundry Associations. 13Sp. 1966.
Allen S. Unwin, London. 45/-.
U. N. Economic and Social Control Economic
Comm. for Latin America. Manufacture of basic industrial
equipment in Argentina. II. Iron and steel
production. 23p. 1962 (E/CX. 12/629/Add. 3).

U. N. Economic Commission for Europe. Statistics
of world trade in steel, vi, 39p. 1965. H.M.S.O. London.
5/6.
U. N. Economic Commission for Europe. Steel Committee.
European steel market. 2, v, 126p. 1966. U. N.,
Geneva. 11/6.
Verein Deutscher Eisenhuttenleute. Stahleisen Kalender,
1966. Ed. by R. Arntzen and G. Bauhoff. 326p.
1965. Verl Stahleisen, Dusseldorf. 6 DM.
Steel calendar.
Vidal, A. D., ed. Mines register, 1965. Ed. 27. 604p.
1966. American Metal Market, N. Y. $36.
Werner, Kurt. Industriestatistik des Bundesrepublik
Deutschland. Ed. 2. 185p. 1965. Duncker & Humblot,
Berlin. 20.00 DM.
Industrial statistics of the German Alliance.
Wirtscliaftsvereinigung Eisen und Stahlindustrie.
Statistisches Jahrbuch der Eisen-und Stahlindustrie
fur 1965. xiv, 324p. 1966. Verlag Stahleisen, Dusseldorf.
20 DM.
Statistical yearbook of the iron and steel industry for 1965.
FOUNDRY
Briggs, Cliarles W. Solidification of steel castings.
127p. 1964. Steel Founders Society, Cleveland. $4.
British Steel Castings Research Association. Recommended
procedure for surface flaw detection of steel
castings by magnetic particle examination. 13p. 1966.
The Assn., Sheffield. 5s. [$0.70]
British Steel Castings Research Association. Recommended
procedure for the ultrasonic examination of
steel castings. 50p. 1964. The Assn., Sheffield. 30s.
27

BrunJiuber, Ernest. Leichtmetall-und Schwermetall-
Kokillenguss. Ed. 3. 367p. [1966] Shiele w. Scbon,
Berlin. 39 DM.
Light and heavy metal permanent mold castings.
Centre d Etudes Superieures de la Siderurgie, Metz,
1964. Coulee dc l'acier. Ed. 2 by P. Vallet. Loose-leaf.
[1965] CESSID, Metz. 82.50 F. (Cahiers, no. 15).
Steel casting.
Climax Molybdenum Co. Successful uses of castings
(ND) 20p. 1965. The Company, N. Y.
Donike, Wilhelm, ed. Schmelzen und Gattieren in
der Eisengiesserei. Ed. 2. 247p. 1965. Schiele & Schon,
Berlin.
Smelting and mixing in the iron foundry.
HalUday, Iain M. D. Continuous casting of steel
in the U.S.S.R. 2, 155, 175p. 1966. O.E.C.D., Paris.
H.M.S.O., London. 45/-.
Institute of British Foundrymen. Typical microstructure
of cast metals. Ed. 2. v.p. 1966. The Institute,
London. 84s. (Members 31s 6d) (Available from
American Foundrymen's Society $11.75).
Ostberg, Alrik. Konstniktions anvisningar for gjut
gods. Sandgjutgods. 190p. 1966. Utgiven av Sveriges
Mekanforbund. Jonkoping. 66 Sw. Kr.
Construction alignment for casting. Sand casting.
Plyatskit, Vladimir M. Extrusion casting. 316p. 1965.
Primary Sources, N. Y. $22.50.
Riedel, Gerhard. Einfluss der Vakuumbehandlung
in der Giesspfanne auf die Eigenschaften von Kugellagerstahl.
35p. 1964. Bergakad. Claustahl.
Dissertation. Influence of vacuum treatment in the casting
ladle on the characteristics of ball bearing steels.

Roesch, Karl and Zimmermann, Kurt. Stahlguss. xiv,
358p. 1966. Verl. Stahleisen, Diisseldorf. 74 DM.
Steel castings.
Schneider, Philipp, et al. Malleable iron castings.
xiv, 436p. 1966.
Selka, Ed. Die Giesserei-Industrie und ilire Heller
mit Einkaufsfuhrer 1966, Eisen-und Stahl-und Temperguss,
NE-und Edelmetallguss. v.p. 1966. Industrieschau-Verlagsges.
Darmstadt. 19 DM.
Foundry industry and its aid with management guidance,
iron and steel and malleable iron, NE and noble cast metals.
Verein Deutscher Eisenhuttenleute, Verband Deutscher
Elektroiechniker, Deutsch Gesellschaft fur Metallkunde
und Verband Deutscher Physikalischer Gesellschaften.
Berichte der arbcitsgemeinschaft Ferromagnetismus,
1964. 235p. 1965. Verlag Stahleisen,
Diisseldorf. DM 38-.
Information on the ferromagnetism working agreement, 1964.
Verein Deutscher Giessereifachleute. Einfluss der
Oberflachenbeschaffenheit auf die Dauerfestigkeit von
Stahlguss. 38p. 1965. Westdeutscher Verlag, Koln. DM
24.80. (Forschungsberichte, no. 1552).
Influence of surface conditions on the fatigue strength of
cast steel.
Veretn Deutscher Giessereifachleute. Giesserci-Kalender,
1966. Ed. by Ph. Schneider and others. 323p.
1965. Giesserei-Verl., Diisseldorf. 6 DM.
Foundry calendar.
Wallace, John F. Engineering properties of cast iron.
21p. 1966. ASTME., Dearborn, Mich.
Wlodawer, Robert. Directional solidification of st
castings, xiii, 242p. 1966. Pergamon, Long Island City,
N. Y. $18.50.

IRON ORES
Daeves, K., ed. Werkstoff-Handbuch Stahl und Eisen.
Ed. 4. 950p. 1965. Verlag Stahleisen, Diisseldorf.
DM 14S. (Members DM 133).
Iron and steel raw materials handbook.
Eisenkolb, Friedrich. Einfiihrung in die Werkstoffkunde.
v. 3. Eisenwerkstoffe. Ed. 4. 275p. 1961. Verlag
Technik, Berlin.
Introduction to raw materials science, v.3. Iron raw ma.
terials.
Pfleider, Eugene P. and Berger, Fred E., eds. Proceedings,
27th annual mining symposium and 39th annual
meeting of the Minnesota section. A.I.M.E. Duluth,
196p. 1966.
Iron ores, mining, beneficiation, pelletizing. etc.
Rosier, Hans Jurgen. Zur Entstehung der oberdevonischen
Eisenerze vom Typ Lahn-Dill in Ostthiiringen.
79p. 1962. Akad. Verlag. Berlin (Freiberger
Forschungshefte [Reihe] C. Geowissenschaften, 138:
Mineralogie, Lagerstattenlehre).
Origin of the upper Devonian iron ore of the Lahn-Dill type
in East Thuringia.
Mineralium. Deposita. v. 1- May 1966- Qtly. Springer,
N. Y. $2A (Members $16).
International journal for geology, mineralogy and geochemistry
of mineral deposits under the auspices of the Society
for Geology Applied to Mineral Deposits.
Winiberg, Frederick. Metalliferous mine surveying.
Ed. 5. xii, 456p. 1966. Mining Pub., London. 80/-.
METALLURGY, REFRACTORIES, TESTING, WORKING
Aleksantlrov, Nikolay Nikitich, and Klochnev, N. I
Production technology and properties of heat-resisting
cast iron. 146p. 1965. Israel Program for Sci. Trans.
thru Davey, N. Y. $7.50.
.in

American Society for Testing and Materials. Advances
in the technology of stainless steels and related
alloys. 355p. 1965. $21.50. (Members S15).
American Society for Testing and Materials. Chemical
analysis of metals; sampling and analysis of metal
bearing ores. 864p. 1966. Assoc, Philadelphia, Pa. $15
(Members $10.50). 1966 Book of ASTM standards, pt
32.
American Society for Testing and Materials. Deter
mination of nonmctallic compounds in steel. 102p
1966. The Society. $4.75. (Members $3.30).
American Society for Testing and Materials. Ele
vated-temperature properties of basic-oxygen steel
55p. 1965. $4. (Data series 40).
American Society for Testing and Materials. Special
Technical Publication.
No. 374: Irreversible effects of high pressure, and
temperature on materials, Symposium, 1964. vi, 173p.
1965. $8.50. (Members $5.95).
No. 378: Internal friction, damping and cyclic plasticity,
Symposium, 1964. vi, 149p. 1965. $7.50. (Members
$5.25).
No. 381: Fracture toughness testing and its applications.
Symposium. 1964. x, 409p. 1965. $19.50. (Members
$13.65).
No. 393: Determination of nonmetallic compounds
in steel. [3j, 96p. 1966. $4.75. (Members $3-30).
Aockerblom, Dieter. Zum Zunderverhalten warmfester
Turbinenstahle insbosondere von 12% Chromstahlen
unter uberhitztem Wasserdampf. HOp. 1966.
Techn. Hochsch., Aachen.
Dissertation. On heat resistant turbine steel shells of 12%
chrome steel under super-heated steam.
31

Arkulis, G. E. Compound plastic deformation of
layers of different metals, xiii, 223p. 1965. Davey for Israel
Program for Scientific Translations, Jerusalem.
$10.25.
Austin, J. B. Trends in the metallurgy of low-alloy,
high-yield-strength steels, lip. 1963. ASTM, Philadel.
phia. $.70.
Bailey, Glenn Cltarles. Ferromagnetic resonance of
3He-IR radiated thin metal films. 172p. 1965. Catholic
Univ. Washington, D. C.
Thesis.
Bain, Edgar C, and Paxton, Harold W. Alloying elements
in steel. 291p. 1966. A.S.M., Metals Park, Ohio.
$9.50. (Members $7.60).
Banks, Basil, et al. Ultrasonic flaw detection in metals:
Theory and practice. 256p. [1962] Prentice Hall,
Englewood Cliffs, N. J. $15.
Beckert, M., and Klemm, H. Handbuch der Metallographischen
Atzverfahren. 379p. 1963. VER Deutscher
Verlag fiir Grundstoffindustrie MDN 36.
Handbook of mctallographic etching processes.
Bemski, George, and Da SUva, X. A. Internal fields
of iron in Fe Pd alloys. 8p. 1963. Centro Brasileiro de
Pesquisas Fisicas, Rio de Janeiro.
Berger, G. La dilatometri differentielle appliquee a
1 etude des aciers. xiv, 132p. 1965. Dunod, Paris. 24 F.
Differential dilatometry applied to the study of steels.
Berkeley International Materials Conference. High
strength materials. 1964. Ed. by Victor F. Zackay. xiv,
879p. 1965. Wiley, N. Y. $22.
Birchon, D. Dictionary of metallurgy. 409p. 1965.
Philosophical Lib. N. Y. $15.

Biswas, A. K. Principles of steelmaking 412p. 1966.
Asia Pub. House, N. Y. $9.
Bock, Richard. Einfluss von Gefuge und chemischer
Zusammensetzung auf die Verformungs-und Vergutungsergenschaften
hiirtbarer Bandstahle. 33p. 1965.
Techn. Hochsch., Aachen.
Dissertation. Influence of grain and chemical composition on
the deformation hardening characteristics of hardenable steel
strip.
Bohm, Harald H. Kinetik Morphologic und Struktur
einiger ausscheidungshartender austenitischer Legierungen
auf Eisenbasis. 67p. 1966. Techn. Hochsch.,
Aachen.
Dissertation. Kinetic morphology and structure of some precipitated
quenched austenitic alloys of iron bases.
Borzdyka, E. M. Elevated-temperature testing of
metals. Ed. 2. vi, 418p. 1965. Israel Program for Scientific
Translations, Jerusalem. Available from Daniel
Davey & Co., N. Y. $16.50.
Bouiltet, Jean Pierre. La Coupe des Metaux t, 1.
L'outil — La formation du copeau. xii, 20Sp. 1963.
Dunod, Paris. $9.45.
Metal cutting, v.l. The tool-chip forming.
Bradbury, T. G., ed. Mechanical working of steel
-2. ix, 542p. 1965. Cordon and Breach, N. Y. $27.50.
($14.50 paperback) ($22. cloth, $11.60 paperback for
AIME members) (Metallurgical Society Conferences
v. 26).
Brandon, D. G. Modern techniques in metallography.
266p. 1966. Dekker & Nordemann, Holland.
$11.50.
Broun, Franz E. Das Spiel mit Stahl. 128p. 1964.
Willmy, Numberg. 24 DM.
Performance with steel.
33

Breuer, George. Beitrage zur Kenntnis der Entkohlung
von Eisen-Kohlenstoff-Schmelzen. 87p. 1966.
Bergakad., Clausthal.
Dissertation. Contribution to the knowledge of decarbonitg.
tion of iron carbon melting.
British Iron O Steel Research Association. Report.
So. MG/E/S9/65(ND): Tripartite technical cooperation
programme symposium on problems in the
load-carrying application of high strength steels, by
M. J. May. 26p. 1965. The Assn., London.
Bucher, J. II., and Grozier, J. D. Toughness of high
strength, hot rolled steels. 20p. 1965. A.S.M., Metals
Park, Ohio. (Tech. Rept. no. D5-11.4).
Buchtcald, Vagn F. Iron-nickel-phosphorus system
and the structure of iron meteorites. 46p. 1966. Acta
Polytechnica Scandinavica, Stockholm. 10 kr. (Chemistry
incl. metallurgy ser., no. 51).
Burke, J. Kinetics of phase transformations in metals.
226p. 1965. Pergamon, Long Island City, N. Y. $4.95.
Butcher, E. G., et al. Temperature attained by steel
in building fires, vi, 37p. 1966. HMSO, London. 4/6.
(Cr. Brit. Fire Res. Station. Tech. papers, no. 15).
Centre d' Etudes Superieures de La Siderurgie.
L'acierie electrique. Ed. 2. v. p. 1965. CESSID, Loseblattausg
79 Fr. F. (Cahiers, no. 14).
Electric steel.
Centre dlnformation "Cuivre, Laitons, Alliages'
et al. Les aciers au cuivre. 176p. 1966. Centre
d'Information du Cuivre, Bruxelles.
Copper steels.
34

Centre d'lnformation de la Tote d'Acier Galvanisse.
La t6Ie d'acier galvanisee. n.p. 1966? The Center, 21
rue d'Astorg, Paris.
Galvanised steel sheet.
Centre National de la Recherche Scientifique, Paris,
1959. C.N.R.S. New physical and chemical properties
of metals of very high purity. 504p. [ 1965] Gordon and
Breach, N. Y. $24.50.
Centre National de Recherches Metallurgiques.
Problemes fondamentaux de la deformation et de la
rupture de lacier. 159, 29, 32p. 1966. The Centre,
Bruxelles. 5000 F B.
Fundamental problems of deformation and rupture of steel.
Chater, W, J. B., and Harrison, J. L. Recent advances
with oxygen in iron and steel making. 402p.
1965. $17.
CJiaussin, Camille, and Hilly, G. Metallurgie. Ed. 6.
v. 1: Alliages metalliques. xiv, 297p. 1966. Ed. 5. v.2:
Elaboration des materiaux. xiv, 268p. 1965. Dunod,
Paris.
Metallurgy, v.l: Metallic alloys; v.2: Materials production.
Chekmarev, A. P., et al. Teoria prodol'noi. 21 lp.
1965. Metallurgiya, Moscow.
Production of relieved rolled profiles.
Chernov, N. N., and CJiechuro, A. N. Vedenie domennoi
pechi. 224p. 1965. Metallurgiya, Moscow.
Blast furnace operation.
Christian, J. W. Theory of transformations in metals
and alloys. 973p. 1965. Pergamon, Long Island City.
N, Y. 23: (International Ser. of Mono, on Metal Physical
Metallurgy, v. 7).
35

Colombier, L., and Hochmann, J. Aciers inoxydables.
Aciers refractaires. Ed. 2. 636p. 1965. Dunod,
Paris. 118 Fr. fr.
Stainless steels. Heat-resisting steels.
Compania de Acero del Pacifico S.A. Lexico siderurgico;
espaiiol-ingles, ingles-espanol, preparado pro
Comisi6n de terminologia siderurgica. 144p. 1965.
Huachipato, Chile.
Metallurgical dictionary; Spanish-English, English-Spanish.
Craik, D. J., and Tebble, R. S. Ferromagnetism and
ferromagnetic domains, xii, 337p. 1965. North-Holland,
Amsterdam. 4 10s.
Selected topics in solid state physics.
DVS-Sondertagung Loten, 1st, Augsburg, 1964. Vortrage.
52p. 1964? Dt. Verl. fiir Schweisstechnik, Diisseldorf.
19.50 DM. (Fachbuchreihe Schweisstechnik,
bd. 41).
Soldering.
Dardel, Y. La transmission de la chaleur au cours
de la solidification du rechauffage et de la trempe de
I' acier. 266p. 1964. Revue de Metallurgie. Paris. 70 F.
Heat transmission in the solidification, reheating and quenching
of steel.
Dasarathy, C, and Hume-Rothery, W. Melting and
freezing points of alloys—the system iron—gallium.
23p. BISRA, London. (Paper no. MC/A/113/64).
Daussy, R. Guide pratique de charpente metallique.
212p. 1965. Societe de Diffusion des Techniques du
Batiment et des Travaux Publics, Paris. 54 Fr. fr.
Practical steelwork guide.
Davies, D. Durof. Practical experimental metallurgy,
viii, 174, [3lp. 1966. Elsevier. N. Y. $7.
36

Dehousse, Nicolas Maurice. Determination experimentale
de la charge ultime des conduites en acier
doux sollicitees par une pression interne et par deux
charges lineaires diametralement opposees. 104p. 1966.
C.R.I.F., Brussels.
Experimental determination of the ultimate load of mild
steel pipelines loaded by internal pressure and two diametrically
opposed linear loads.
Dennis, W. IL Extractive metallurgy. 317p. 1965.
Philosophical Library, N. Y. $15.
Deutsche Akadcmie der Wissenschaften zu Berlin.
Neue Werkstoffe durch pulvermetallurgische Verfahrcn.
Vortragc gchaltcn auf der Konferenz der Forschungsgemeinschaft.
am 10. u 11. 6. 1963. ISSp. 1964.
The Academy, Berlin. 25.50 DM.
New raw materials through the powder metallurgy process.
Lectures presented at the community research conference 10-
11.6, 1963.
Dietz, Albert George Henry. Composite materials.
64p. 1965. ASTM, Philadelphia, Pa. $1.75. (Members
$1.25) (Marburg lecture).
Dove, A. B., ed. Steel wire handbook, v. 1. iii, 31Sp.
1965. Wire Assn., Stamford, Conn. $15.
Duren, Karl. Entstehungsbedingungen der verschiedenen
Sulfideinschlusstypen, ihr Verhalten bet der
Verarbeitung und ihr Einfluss auf die mechanischen
Eigenschaften. 62p. 1964. Techn. Hochsch., Aachen.
Dissertation. Origin of various sulphide inclusions, behavior,
treatment and influence on mechanical properties.
Durrer, Robert. Die Mctallurgie des Eisens. 4. vollig
neu bearb. aufl. 2v. 927p. Verlag Chemie, Weinheim
(Available from Walter J. Johnson, Inc., N. Y.)
$211.
Supplements Gmelin Handbook, volume on Iron (Syst. 59.
pt. A, issues 3-5.)
37

Edge, Charles Key. Mossbauer effect at high pressure.
99p. 1964. Univ. of HI., Urbana, III.
Thesis. Iron, copper, etc. were studied.
Elliot, Rodney P. Constitution of binary alloys. 877p.
1965. McGraw Hill, N. Y. $35.
Enoclts, D. J., and Gifford, W. D., eds. Iron making.
426p. 1964. Cordon & Breach, N. Y. $15.
Essen Engineering Centre. Pelletisieren und sintcm.
54p. 1965. Vulkan-Verlag Dr. W. Classen, Essen. 16
DM.
Pelletising and sintering.
European Coal and Steel Community High Authority.
De Ferri Metallographia. A metallographic atlas of
iron, steels and cast iron, v.l: Fundamentals of metallography.
431p. v.2: Structure of steels. 551p. v.3:
Solidification and deformation of steels. 310p. Available
from W. B. Saunders. Philadelphia. $116. (v.l
$39; v.2 $41; v.3 $36).
Atlas of ferrous metallurgy.
European Coal and Steel Community. High Authority
Steel Congress, 1965, Luxembourg. Progress in steel
processing. 717p. 1966. H.M.S.O., London. £5/8-.
Ferrante, John A,, and Swails, JosepJi T. Brazing
stronger, more reliable steel joints. 20p. 1965. ASTME,
Dearborn, Mich. (Paper no. 749).
Fishlock, David, and Hards, K. W. New ways of
working metals, ix, 136p. 1965. Ncwnes, London. 35s.
Fletcher, E. E., and Elsea, A, R. Hydrogen movement
in steel-entry, diffusion and elimination. 80p.
1965. Battelle Memorial Institute. Columbus. Ohio.
(DMIC Rept.: 219).
Foster, Arnold R., ed. Handbook of metal powders.
x, 274p. 1966. Reinhold, N. Y. $15.
38

France, Services Techniques et Industriels de I'Aeronautique.
Caracteristiques des aciers; resultats des essais
systematiques effectues par letablissement aeronautique
de Toulouse. 193p. 1958. Service de Documentation
et d'lnformation Technique de l'Aeronautique,
Paris. 14.40 nf.
Characteristics of steels.
Frommann, Khus. Cber die Formiinderungen beim
Richten von Schienen auf einer Rollenrichtmaschinc.
66p. 1965. Techn. Hochsch., Aachen.
Dissertation. Deformation with band straightener and roll
straightener.
Garofalo, Frank. Fundamentals of creep and creep
rupture in metals. 258p. 1965. Macmillan, N. Y. $4.95
Gemmill, M. G. Technology and properties of fer
rous alloys for high-temperature use. 239p. 1966
Chemical Rubber Co., Cleveland, Ohio. $16. Newncs
London. 70/.
Gentzsch, Gerhard. Fachbibliographie der Umformtcchnik.
Bd. 2. Walzen von Blcchcn und Bandem,
1955-1962. xxiv. S55p. 1965. Triltsch. Dusseldorf. 58
DM.
Bibliography and shaping practice, v. 2. Rolling sheet and
strip.
Gibson, Eleanor B., and Tapia, E. W., eds. Guide to
metallurgical information. Ed. 2. xvi, 222p. 1965.
S.L.A.. N. Y. $7.
Gibson, J. E. Linear elastic theory of thin shells.
194p. 1965. Pergamon. N. Y. $4.95.
Goncharov, Boris Fedorovich, and Snlomakhin. Ivan
S. Proizvodstvo chunguna. 36Sp. 1965 Metallurgiya,
Moscow.
Cast iron metallurgy.

Gorgen, Kurt, and Tiedtke, Alfred. Mechanik und
Festigkeitslehre. 200p. 1965. Hanser, Munich. 14.80
DM.
Mechanics and strength science.
Gosudarstvennye Standarty SSSR. 'Stal' Kacheitvennaya
i Vysokokachestvennaya Sortovoi i fasonnyj'
prokat i halibrovannaya stal. 128p. 1963. Standartgiz,
Moscow. SO kop.
Normal and high quality steel. Profile and shaped rolled
products and standard section steel.
Gross, J. H„ et al. Steels for hydro-space pressure
hulls. 46p. 1965. ASM, Metals Park, Ohio. (Tech.
Rept. no. W2-3-65).
Guiaux, P. Deformation et tensions residuelles dam
un joint soude par un precede automatique. ISp. 1965.
C.R.I.F. (Steelwork Research Institute of Fabrimetal)
Brussels.
Deformations and residual stresses in a joint welded by an
automatic process.
Guzzoni, G. Gli acciai comuni e speciali. v. 2: Trattamenti
tcrmiei. Ed. 6. 259p. 1966. v. 3: Acciai speciali
e inessidabili. Ed. 2. iii, 432p. 1966. v. 4: Acciai da
utensili. ii, 26Sp. 1966. Ultrico Hoepli, Milan, v. 2:
4500 L, v. 3: 7500 L, v. 4: 4500 L.
Ordinary and special steels, v.2: Heat treatment: v.3. Special
and stainless steels; v.4: Tool steels.
Habraken, L,. and de Brouwer, J. L., eds. De ferri
mctallographia. I: grudlagen der Metallographie. xvi,
481p. 1966. Presses academiques Europeennes, Bruxelles.
1920 bfr.
Ferric metallography. I: Fundamentals.
40

Hancart, J. Analyse molcculaire quantitative par
diffraction des rayons x. Dosage des oxydes de fer
dans les agglomeres de haut foumeau. 139p. 1965.
C.N.R.M., Liege. FB. 300.
Molecular quantitative analysis by x-ray diffraction. Preparation
of iron briquettes in the blast furnace.
. Handleiding voor het stralen van staalconstructies
met behulp van persluchtapparatuur. 51p. 1965. Stichting
Centrum Bauwcn in Staal, Rotterdam.
Manual for the abrasive blasting of steel structures with
pneumatic equipment,
Hanson, A., and Parr, J. G. Engineer's guide to steel.
406p. 1965. Addison Wesley, Reading, Mass. $13.75.
Hauffe, K. Oxidation of metals, xi, 452p. 1965. Plenum
Pr., N .Y. $19.50.
Haus der Technik. [Symposium 1966] Neue Stahle.
31p. 1966. Vulkan-Verlag. Classen, Essen.
New steels.
Haussmann, Michael. Elektrochcmische Mcssungen
an Eisen-Sauerstoff-Schmelzen. 2Sp. 1965. Techn.
Hochsch., Aachen.
Dissertation. Electrochemical measurements in iron-oxygen
smelting.
Helwig, M. W., and Archibald, P. A. Explosive
forming of heavy-walled forgings. 1965. A.S.M., Metals
Park, Ohio. (Tech. Rept. no. 5-6. 2).
Hempel, Max, and Hillnhagen, E. Einfluss der Erschmelzungsart
auf die Dauerschwingfestigkeit ungekerbier
und gekerbier Proben eines Walzlagenstahles.
63p. 1965. Westdeutscher Verlag Koln. 38 DM-.
(Forsch. Landes Nord.-Wcst. no. 1492).
Influence of smelting method on the fatigue strength of unnotched
and notched steel roller bearings.
•11

Hill, Mone. Relation between structure and toughness
in low alloy high strength steels. 24p. 1965. A.S.
M., Metals Park, Ohio. (Tech. Rept. no. D5-11-9).
Hinze, Horst. Die Gleichgewichte des Systems Eisen-
Kohlenstoff-Sauerstoff und ihrc Beeinflussung durch
die Elemente Phosphor, Mangan und Schwefel im
Temperatur-und Konzenlrations-bereich des fliissigen
Stahls. 63p. 1965. Techn. Hochsch., Aachen.
Dissertation. Equilibrium of iron-carbon oxygen systems
and their influence through the elements phosphorus, manganese
and sulfur in the temperature and concentration range
of liquid steels.
Hirsch, Joachim von. Beitrage zu den heterogenen
Gleichgewichtcn und zur Kalorimetrie des stabilen
Systems Eisen-Silizium-Kohlenstoff. Sip. 1965. Bergakademie,
Clausthal.
Dissertation. Contributions to the heterogeneous equilibrium
and calorimetry of stabile iron-sil icon-carbide systems.
Holtzliausen, P. Kleine Stahlkunde fiir den Maschinenbau.
96p. Verlag Stahleisen, Diisseldorf. 4 DM.
Short treatise on steel metallurgy for mechanical engineers.
Honke, Manfred. Vorgange in den grenzschichten
beim Warmstauchen metallischer zylinder. 53p. 1964.
Techn. Hochsch., Aachen.
Dissertation. Reactions in the boundary layers with hot ramming
metallic cylinder.
Horstmann, Dietrich. Der Einfluss des Blechwerkstoffes
und der Verzinkungsbedingungen auf die Eigenschaften
verzinkter Bleche und Bander. 33p. 1965.
West dt. Verl., Koln. 1880 DM (Forschungsberichte
des Landes Nordrhein-Westfalen, no. 14S6).
Influrnce of sheet metal raw materiats and galvanizing restrictions
on the sheet metal coatings and bands.

Hufnagel, Franz Josef. Stickstoffverteilung im Hochofen
und Stickstoffbewegung im Siemens-Martin-Ofen.
38p. 1966. Bergakad, Clausthal.
Dissertation. Nitrogen distribution in blast furnace and
nitrogen activity in the Siemens-Martin furnace.
Hull, Derek. Introduction to dislocations, xi, 259p.
1965. Pergamon, N. Y. $4.55.
Hume-Rothery, W. Structure of alloys of iron. 280p.
1965. Pergamon, N. Y. $4.95.
Illinois University. Bulletin.
No. 479: Causes and control of cracking in concrete
reinforced with high-strength steel bars. A review of
research, by Elmer E. Reis, Jr., et al. 61p. 1965.
Illinois University, Dept. of Theoretical and Applied
Meclianics. Report.
No. 289: Sixth student symposium on engineering
meclianics, by D. C. Holloway, et al. v.p. 1966.
Ineson, E. Bibliography on the effects of microstructure
of the mechanical properties of heat treated low
alloy wrought steels. 23p. 1965-66. B.I.S.R.A., London.
Rept. no. MG/A/136/62.
Institution of Mechanical Engineers. Lubrication
and Wear Group and Iron and Steel Institute. Iron
and steel works lubrication. Third annual meeting,
1964. vii, 420p. 1966. The Institute, London. £6.
Iron and Steel Institute. The blast furnace. A bibliography
of translated articles. 12p. 1966. The Institute,
London.
Iron and Steel Institute. Engineering experience in
basic oxygen steelworks. 117p. 1966. The Institute,
London. 100s. (Pub. no. 98).
•33

Iron and Steel Institute. Vacuum degassing of steel,
1965. 193p. 1965. The Institute, London. 100s. (Special
rept., no. 92).
Iron and Steel Institute and Institute of Metak
Heat Treatment Jt. Comm. Heat treatment of metals.
Proceedings, 1965. Ed. by T. L. Hughes. 9, 202p. 1966.
The Institute, London. £5. (Spec. Rpt. no. 95).
Italsider, Carmi E., and Fedeli, C, eds, I colon
del ferro. xxii, 115p. 1963. Italsider, Genoa.
Iron dyes.
Japan Society for the Promotion of Science. Standard
method of measuring the austenite grain size in
steel. 30p. 1965. The Society. (Special rpt. no. 5).
Kacanov, N. N. Prokalivaemost stali (Hartbarkeit
von Stahl) 251p. 1964. Izdatelstvo Metallurgija, Moskva.
92 kop.
Hardenability of steel.
Kaup, Konrad. Die Gleichgewichte zwischen Eisenschmelzen
und Schlacken des Systems FeOQ-CaO-
PiOs-MgO bei 1600° C. 29p. 1966. Bergakad, Clausthal.
Dissertation. Equilibrium between iron smelting and slags in
the FeO.-CaO-PjOj-MgO systems at 1600° C.
Kessel, Herbert. Untersuchungen iiber die Abschrechreckaltcrung
kohlenstoffhaltiger Eisen-Silizium-Legicrungen.
50p. 1963. Techn. Hochsch., Aachen.
Dissertation. Investigation into the carboniferous iron-silicon
alloys.
Khan, B. Kh, and Ishchuk, N. Ya. Riskislenie degazatsita
legirovanie stali. Ed. 2. 254p. 1965. Metallurgiya,
Moscow.
Deoxidation, degassing end alloying of steel.
44

Kieffer, R., and Benesovsky, F. Hartmetalle. Ed. 2.
ix, 541p. 1965. Springer, N. Y. $28.50. Wien. 134 DM.
Cemented carbide.
Kiessling, Roland, and I^ange, Nils. Non-metallic
inclusions in steel. Pt. 2: Inclusions belonging to the
systems. MgO-SiO* AbOs CaO-SiOi - Alt O* and related
oxide systems. Sulphide inclusions. 10, 162p.
1966. Iron and Steel Institute, London. 60/-. (Special
rpt. no. 100).
Kirko, Igor Mikhailovich. Magnetohydrodynamics
of liquid metals. SOp. 1965. Consultants Bur. N. Y.
$17.50.
Koelsch, Carl. Impact theory of energy transmission
relative to explosive forming. 12p. 1964. A.S.M., Metals
Park, Ohio. (Tech. Rept. no. D5-6.4).
Kohler, WilJielm. Beeinflussung der Sulfidausbildung
im Automatenstahl und ihre Auswirkung auf die
Zerspanbarkcit. 35p. 1965. Techn. Hochsch., Aachen.
Dissertation. Influence of sulfide formation in automatic steel
and its effect on machine working.
Kornilov, Ivan Ivanovich. Metallidy i zaidmodelstvie
mezhdu nimi. 179, [3]p. 1964. Nauka, Moscow.
Metallic! and interaction between metallics.
Kortzfleisch, Bernard von. Untersuchungen uber das
Greifen und Durchziehen bcim Walzen von Blocken
auf Umkehrstrassen. 92, 54p. Bcrgakad, Clausthal.
Dissertation. Investigations on the gripping and passing during
rolling by the block and reverse roll train.
Kramarov, A. D. Proizvodstvo stali v elektropechakh.
440p. 1964. Metallurgiya, Moskva. $2.90. DM 9.50.
Electrometallurgy in steel production.
45

Kunze, Hans-Dieter. Aquivalente W'irkung von Zusatzelementen
auf Loslichkeit, Aktivitiit und Aktivitats
Koeffizienten des Stickstoffs bzw: Schwefels in Eisen
schmelzen bei 1600° C. 34, 23, 42p. 1965. Bergakad.
Clausthal.
Dissertation. Equivalent action of additional elements of tbt
solubility activity and activity coefficients of nitrogen sal
sulfur in melted iron at 1600° C.
Lackmann, Heinz-Helmut. Einfluss der Zuschlagjtoffe
auf den Mineralbestand und die physikalischen
Eigenschaften von Eisenerzsinter. 179p. 1965. Techn.
Hochsch., Aachen.
Dissertation. Influence of material additions to the mineral
strength and physical properties for sintered iron ore.
Lange, Gunter. Zusammenhang zwischen Wasserstoffaufnahme
und Porositat von Eisen, 72p. 1965.
Techn. Hochsch., Braunschweig.
Connection between hydrogen absorption and porosity o!
iron.
Leitner, E. and Straube, H. Die Edelstahlerzeugung,
Schmelzen Giessen, Priifen. Ed. 2. xvi, 895p. 1965.
Springer, N. Y. $49.
High-grade steel, smelting, casting, testing.
Leontaritis, Charalampos. Glcich gewiehtsuntersuchungen
in kohlenstoffgesattigten. Eisen-Mangan-
Schwefel - Losungcn. 65p. 1963. Techn. Hochsch.,
Aachen.
Dissertation. Equilibrium research in saturated carbon-iron.
manganese, sulfur solutions.
Lirtlewood, R. Electrochemistry of slag-metal systems.
20p. BISRA. Sheffield, England. (SM/C/12/
64C/3/64).
46

Litzke, Horst. Untersuchnngen zum zcitabhangigen.
Bruch hockfester, verguteler Stahle. 66p. 1964. Techn.
Hochsch., Braunschweig.
Dissertation. Investigation on time dependence fracture
high tensile, heat treated steels.
McMaster, R. C. Magnetic reaction analyzer—a new
eddy current non-destructive test, 33p., 1955, ASM,
Metals Park, Ohio (Tech. Rept. no. D5-10.3).
Macquart, B. Abaques de flambement des nouvelles
portrelles Euronorm. 32p. 1965. Librairie des Sciences
Girardot et Cie, Paris. 28 French fr.
Buckling charts for the new Euronorm rolled steel joists.
Makepeace, Cliarles E. Mctallographic study of case
carburized ferro-uranium anodes. 34p. 1964. Canada
Mines and Tech Surveys, Ottawa, Canada. (Project no.
F-47-1).
Makepeace, CImrles E. Quantitative metallographic
study of the effect of austenitizing temperature and
uranium content on the frequency of occurrence of
uranium and other alloy phases in an alloy steel. 66p.
1964. Canada Dept. of Mines Tech. Surveys, Ottawa.
(Project no. F-47-3).
May, M. J. Fracture toughness testing. 12p. (1966).
BISRA, London (Rept. no. MG/E/160/64).
Melloy, G. F. Effect of compositional and processing
variables on the mechanical properties of highstrength
low alloy V and V-N steels, lOp. 1965. ASM,
Metals Park, Ohio. (Tech. Rept. no. D5-11.5).
Merriman, A. D. Concise encyclopedia of metallurgy.
Ed. 2, xiii, 1178p. 1965, Elsevier, Amsterdam
17.50 hfl.
47

Metal Bulletin Ferro-alloys. 158p. 1966. The Author,
London. $5.75.
Special issue of the Bulletin.
Milson, Anthony, Physical properties of coke and
their relationship to blast furnace performance. 20p.
1965. British Coke Research Assn., Leatherhead, Surrey,
England.
Morrish, Allan II. Physical principles of magnetism.
680p. 1965, Wiley, N. Y. $16.50.
Mueller, William M., ed. Energetics in metallurgical
phenomena. 203p. 1965. Gordon and Breach, \\ Y. $11.
Nachtergal, C. Charpentes metalliques; calculs et
construction. Ed. 6. 1048p. 1965. Maison d 'Edition A.
De Boeck, Brussels. 1,000 Belgian f.
Structural steelwork; design and construction.
Neumann, H., et al. Stahlrohrherstellunc. Ed. 2.
415p. 1965. Dt. Verl. f. grundstoffindustrie, Leipzig.
38 DM.
Steel tubing manufacture.
Neyret, M. Aciers speciaux 24p. 1964. Chambre
Syndicale des Producteurs d'Aciers Fins et Speciaux
(Monograph no. 13).
Heat resistant steels, stainless and refractory steels.
Nicholson, James C. Electropolishing, the space age
tool. lip. 1965. ASTME, Dearborn. (Paper no. 756).
Nutting, J. and Baker, R, G. Microstructure of metals,
xi, 235p. 1965. Institute of Metals, London. £2/5s
(Members £1 7s6d) (Mono, and Rept. Ser. no. 30).
Nutting, /. and Parsons, P. D. (Project MC/E/270)
Factors affecting the creep rate in austenitic steels.
Final report. 5 (12)p. 1965. BISRA, Sheffield. (MG/
E/93/65).
48

Oding, 1. A., et al. Creep and stress relaxation in
metals, x, 372p. 1965. Oliver S. Boyd, London. £5 5s.
Oehla, G. Biegen. 331p. 1963. Hanser, Munich.
DM 46.
Bending.
Oelsen, Volker. Die Verteilung von Mangan, Schwefel,
Silizium und Phosphor zwischen kohlenstoffgesattigten
Eisen-schmelzen und Silberoder Kupferschmelzen.
40p. 1966. Bergakad, Clausthal.
Dissertation. Distribution of manganese, sulfur, silicon and
phosphorus between saturated cnrbon materials, melted iron
and silver or melted copper.
Ohler, Reinald. Einflussc bei der Warmwalzung von
Stahldrahten auf ihr Verhalten beim Kaltziehen. 73p.
1965. Bergakademie., Clausthal.
Dissertation. Influence of hot rolling of steel wire on behavior
of cold drawing.
Oppenheim, R. Steels for high speed of light. 13p.
1964. Australian Defense Sci. Res. Labs., Melbourne
(Rept. no. ARL/SM22).
Parr, James Gordon and Hanson, Albert. Introduction
to stainless steel. 147p. 1965. ASM, Metals Park,
Ohio. $7.50 (A.I.M.E. Members S6.75).
Patterson, S., et al. Zerspanbarkeit von Grauguss.
109p. 1965. Westdeutscher Verlag, Koln. DM 59.50
(Forschungs-no. 1491).
Machinability of grey cast iron
Pechs, Martin. Das Maximum der mechanischen
Dampfung in N-haltigem, kalt verformtem o: Eisen.
59p. 1964. Univ. Saarlandes, Saarbrucken.
Dissertation. Maximum mechanical damping capacity in Nhandling,
cold deformed cc iron.

Peiter, A. Eigenspannungen 1. Art-Ermittlung und
Bewertung. 200p. 1965. Michael Triltsch Verlag, Diisseldorf.
57 DM.
Residual stress. 1. Investigative methods and evaluation.
Pfann, William G. Zone melting. Ed. 2. 310p. 1966.
Wiley, N. Y. $11.75.
Peilikainen, J. Effect of tempering on the toughness
of hardened steels. 80p. 1966. Acta Polytechnica Scandinavia,
Stockholm. 10 kr.
Pipkorn, David Nieman, Mossbauer effect in iron
under very high pressure. 60p. 1964. Univ. HI., Urbana,
111.
Thesis.
Plockinger, Erwin and Straube, Harold. Die Edelstahlerzeugung.
Schmelzen, Giessen, Priifen. xvi, S95p.
1965. Springer, N. Y. $49.
Fabrication of specialty steels—melting, casting and testint
Polgreen, G. R. New applications of modern magnets.
330p. 1966. MacDonald, London. 60s.
Polukhin, Petr Ivanovich, et al. Metal process engineering.
440p. 1966. Peace Publishers, Moscow. 21s.
Poster, Arnold R., ed. Handbook of metal powders.
x, 274p. 1966. Rcinhold, N. Y- $15.
Production Engineering Research Association. Cold
extrusion of carbon steels. Effect of component size and
punched speed. 20p. 1961. The Assn. £1 Is (Rept.
no. 93).
Cold extrusion of carbon steels. 31p. 1966. £ 1 Is.
(Rcpt.no. 102).
Prutton, M. Thin ferromagnetic films. 277p. 1964.
Buttcrworth, Washington, D. C. $14.75.
50

Rado, George T. and Suhl, Harry, Eds. Magnetism,
a treatise on modern theory and materials, V. 2A. 443
p. 1965. Academic Pr., New York. $15.
Rajatz, F. Die Edelstahle. 1040p. 1965. Springer Verlag,
Berlin. DM 142.5.
Fine steel.
Reinhard, Herbert. Uber die Natur der Einschlusse
im aluminothermisch erzeugten chrom und im technischen
Ferroclirom. 99p. 1965. Techn. Hochsch.,
Aachen.
Dissertation. On the nature of inclusions in thermal aluminum
chrome production and in technical ferrochrome.
Rengstroff, G. IV. P. High purity metals. 69p. 1966.
Battelle Memorial Institute, Columbus, Ohio (DMIC:
222).
Riebensahm, P. P. and Schmidt, Paul W. Werkstoffpriifung
(Metalle). 68p. 1965. Springer, Berlin.
DM6.
Material testing: metals.
Rogers, Bruce A. Nature of metals. Ed. 2. x, 324p.
1964. A.S.M. Metals Park, Ohio. $4.95.
Rosenblatt, D. N. Use of high strength low alloy
steels for abrasive applications. 12p. 1966. A.S.M.,
Metals Park, Ohio. (Tech. rept. no. C6-17.4).
Ryan, R. S. High strength pipe for cross-country
transmission pipelines. 13p. 1965. A.S.M. Metals Park,
Ohio. (Tech. rept. no. D5-9.1).
Sagamore Army Materials Research Conference Proceedings.
10th, 1963. Fatigue. An interdisciplinary approach,
x, 404p. 1964. Syracuse U. Pr., Syracuse, N. Y.
$18.
51

Saltonstali, R. B. Progress report on nickel-chromium
plated zinc die cast and steel automotive trim.
12p. 1965. ASM Metals Park, Ohio. (Tech. rept. do
D5-24.1).
Save, Marcel. Verification experimentale de l'analyse
limite plastique de plaques et des coques en acier
douz. HOp. 1966. CRIF (Steelwork Research Institute
of Fabrimetal) Brussels.
Experimental verification of the plastic-limit analysis o(
mild-steel plates and shells.
Scheel, Rudiger. Gleichgewichte zwischen fliissigem
Eisen und gesattigten Schlacken des Systems CaO-Fe,-
Si02 unter Beriichsichtigung der Schwefelverteilung.
24p. 1965. Bergakademie, Clausthal.
Dissertation. Equilibrium between liquid iron and saturaUd
precipitate of the systems CaO-Fe»-SiOj considering sulfur
distribution.
Schenck, Hermann and Steinmetz, Eberliard. Wirkungsparameter
von Begleitelementen fliissiger Eisenlosungcn
und ihre gegenseitigen Beziehungen. 36p.
1966. Verl Stahleisen, Diisseldorf. 14.40 DM.
Parametic effects in regard to liquid iron solutions and in
reciprocal relations.
Schlegel, F. Werner. Spanlos umformen auf neuen
Weggen von der gcgossenen Verform zur druckverguteten
Gestalt. 194p. 1965. VDI Verlag, Dusseldorf.
Noncutting transformation of new-process of cast formi
in heat treated shapes.
Scholes, P. H. Fast-neutron reactions and their
possible application to the activation analysis of steelworks
material. 14p. 1965. BISRA, Sheffield, (MG/
D/329/65).

Scholes, P. H. and Bramhall, P. S. Progress in mass
spectrometry for the analysis of steel and high-purity
iron. lip. 1965. BISRA, Sheffield. (MG/D/332/65).
Scholes, P. H., et al. Scheme for the rapid analysis
of iron and steelmaking slags. 35p. 1965. BISRA, Sheffield.
(Paper no. MG/D/245/63).
Schroder, Angelica and Rose, Adolf, Eds. De ferri
metallographia II. Gefiige der Stahle, xv, 559p. 1966.
Verl. Stahleisen, Diisseldorf, 136 DM.
In English. French and German. Ferric metallography II.
Steel Structure.
Schumann, H. Metallographie. 611p. 1966. VEB
Deutscher Verlag fiir Grundstoffindustrie, Leipzig.
1963(?) MDN 3S.
Metallurgy.
Seegar, Alfred, Ed. Probleme, moderne der Metallphysik,
V. 1: Fehlstellen, plastizitat, Strahlenschadigung
und Elektronentheorie, xvi, 445p. 1965. Springer,
N. Y. DM 59.
Modern problems in physical metallurgy, v. I: Failure, plasticity,
radiation damage and electron theory.
SeUin, Walter. Stanztechnik t.4: Formstanzen. Ed.
3.67p. 1965. Springer, Berlin. 6 DM (Werkstattbucher
fur Betriebsfachleute...h.60).
Die technique, V. 4: Forming dies.
Sltarp, John D. Elements of steelmaking practice.
248p. 1966. Pergamon, N. Y. $3.95.
Simmons, Ward Franklin and Van Echo, J. A. Report
on the elevated-temperature properties of stainless
steels. 208p. 1966. ASTM. Philadelphia. $6. (Members
$4.20).
Skrebtsov, Aleksandr Mikhailovich. Radioisotope
study of the open-hearth process. 141p. 1965. Arnold,
London. 42 s.
53

Societe de Chimie Industrielle et la Cliambre Syndicate
des Producteurs d' Aciers Fins et Speciaux. 107p.
1964. The Society, Pau, France.
Possibilities of use of fino and special steels in chemistry.
Spaeder, C. E. Elevated-temperature properties o!
basic-oxygen steel, v, 55p. 1965. ASTM, Philadelphia,
$4. (Members $2.80) (Data series DS40).
Speich, Gilbert R. and Clark, John B., Eds. Precipitation
from iron-base alloys, viii, 412p. 1965. Gordon
& Breach, New York. $21. (Paper $8.50) (Metallurgical
Society Conf., v. 28).
Proceedings of a Symposium sponsored by the Ferrous Metallurgy
Committee, Institute of Metals Div. of Metallurgical
Society of the AIME.
Springfield Armory, Springfield, Mass. Research and
Engineering Division. Technical reports.
No. SA-TR19-1508: Electromagnetic method of nondestructively
examining components for excessive decarburization,
by H. P. Hatch and K. A. Fowler.
No. SA-TR19-1509: Experimental electromagnetic
test methods for the nondestructive evaluation of carburized
steel parts, by K. A. Fowler and II. P. Hatch:
49p. 1964.
Studemann, Hans, et al. Untersuchungen iiber den
Einfluss der Zusammensetzung und GefugeaubUduug
auf das anlassverhalten des Stahles X40 Cr 13. 43p.
1965. Wcstdt. Verl Koln. 27.60 DM. (Forsch. Landes
Nordrhein Westfalen, no. 1579).
Investigations on the influence of composition and grain
structure on the behavior of steels.
54

Symposium on Fracture Toughness Testing and its
Applications, Chicago, 1964. Fracture toughness testing
and its applications. 409p. 1965. ASTM, Philadelphia.
$19.50 (Members $13.65) (Spec. Tech. Publication
no. 381).
Symposium on heat-resistant metallic materials,
organized by Czechoslovak Scientific and Tech. Soc.
and Iron and Steel Research Institute. 2v. Looseleaf
1964.
Symposium on Steels with Yield Strengths Over
200,000 psi, Cleveland, 1963. Structure and properties
of ultrahigh-strcngth steels. 221p. 1965. ASTM, Philadelphia.
$11. (Members $7.70) (Spec. Tech. Publication
no. 370).
Tache, A. J. and Cage, R. M. Tin-alloyed grey iron
cylinder blocks. 16p. 1964. Tin Research Institute,
Middlesex, England. (Pub. no. 342).
Tarnovskii, I. Ya. and otliers. Deformation of metals
during rolling. Trans, from the Russian, xii, 328p. 1965.
Pergamon, N. Y. $15.
Ternes. Helmut. Untersuchungen uber die transkristalline
Spannungsrisskorrosion austenitischer Chrom-
Nickel-Stiihle in heissen Chloridlosungen. 84p. 1963.
Bergakad, Clausthal.
Dissertation. Investigations on the transcrystalline stress
corrosion cracking of austenitic chromium nickel steel in hot
chloride solutions.
Thielsch, Helmut. Defects and failures in pressure
vessels and piping, xviii, 427p. 1965. Reinhold, N. Y.
$15.50.
Thomsen, Erich Gottfried, et al. Mechanics of plastic
deformation in metal processing, xviii, 4S6p. 1965.
Macmillan, N. Y. $16.50.
55

Tilly, G. P. Role of compressive strain in the load
and strain fatigue behavior of H.46 at room tempera
ture. l,25p. 1966. HMSO, London. 7/6. (Gt. Brit. Aero.
Res. Council, current papers no. 844).
Tobolski, Jurgen. Einfluss von Wasserdampf und
Kohlendioxyd auf die Oxydation von Reineisen, und
Eisem-Silizium-Legierungcn in Sauerstoff bei hobeu
Temperaturen. 84p. 1964. Techn. Hochsch., Aachen.
Dissertation. Influence of steam and carbon dioxide on u*
oxidation of pure iron and iron silicon alloys in oxygen with
high temperature.
Tottle, C. R. Science of engineering materials. 252p.
1966. Chem. Put. Co., N. Y. $0.75.
Tselikov, A. L and Smtrnov, V. V. Rolling mills. 405
p. 1965. Pergamon Press, Long Island City, New York.
$25.
Revised and enlarged edition of Tselikov's earlier booki
rolling mills and mechanisms of rolling mills. Translated from
the Russian by M. H. T. Alford.
Uhl, Ulrich. Wirtschaftliche und technologist
grundlagen ver Verwendung von Kohle als Hilfsprennstoff
fur den Hochofen. 109p. 1965. Techn. Hochsch.,
Aachen.
Dissertation. Economic and technical fundamentals of usage
of carbon as a combustion aid in the blast furnace.
Ullyett, Kenneth. Steel; it's made like this. (Juvenile)
72p. 1966. Roy, N. Y. $3.25.
Uys, J. M. and Bishop, H. L. Process simulation and
control in iron and steelmaking. x, 340p. 1966. Gordon
& Breach, X. Y. $19.50. (Metallurgical Soc. Conf. v.
32).

VEB Stahl-und W'alzwerke. Lieferprogramm Stahl,
erzugssortiment fiir Warm und Kalt geformte Erzegnisse
aus Stahl. v. 1-2. 323, 358p. 1965, VEB Deutchen.
Verlag fur Grundstoffindustrie, Leipzig 6 MDN,
i.50 MDN.
Steel production program. Recommended range for hot and
old formed steel products.
Verein Deutscher Eisenhuttenleute. Chemikerauss-
:huss Ed. Handbuch fiir das Eisenhiittenlaboratorum,
v. 2: Die Untersuchung der metallischen Stoffe.
Ed. 2. xxiii, 441p. 1966. Verlag Stahleisen, Diisseldorf.
38 DM.
Handbook for the iron metallurgy laboratory, V. 2. Investigation
of metallic materials.
Verein Deutscher Eisenhuttenleute. Metallhiittenkunde
fiir Eisenhuttenleute. 332p. 1965. Verlag Stahleisen,
Diisseldorf. DM 28-.
Metal science and technology for iron and steel metallurgists.
Verein Deutscher Eisenhuttenleute. Werkstoff
Handbuch Stahl und Eisen. Ed. 4. v.p. 1965. Verl.
Stahleisen, Dusseldorf. 148 DM.
Verein Deutscher Eisenhuttenleute, Ed. Internationale
Schmiedetagung, 1965. Berlin. Freiformachmieden
in der Entwicklung der neuen Technik. x, ISlp. 1966.
Verl. Stahleisen, Dusseldorf. 70 DM.
Free form machining in the development of new techniques.
Verein Deutscher Ingenieur - Tagung. Verbrennung
und Feuerungen. 142p. 1966. VDI-Verlag, Dusseldorf.
48 DM. (VDI Berichte, no. 95).
Combustion and heating.
Verriest, R. Evaluation rapide de 1'equivalent en
carbone des fontes. 46p. 1965. CRIF, Brussels.
Rapid evaluation of the carbon equivalent of cast iron.
57

Vidts, A. de Sy. J., and Dilewijns, J. Beginselen vaa
algemene metallurgie en siderurgie. 364p. 1965. MCI,
Ghent. 700 Belgian fr.
Principles of general metallurgy and of iron and steel metallurgy.
Vinokur, B. B. et al. Zaroprocnaja stal. Legirovanie,
modificirovanie i gorjacaja obrabotka. 265p. 1965. Institut
Problem Litza, Kiev. 1 Rub., 20 kop.
Heat resistant steel. Composition and heat treatment.
Vonsovskii, S. V. Ferromagnetic resonance. 303p.
1966. Pergamon Pr., N. Y. $10.
Wassermann, Gunter. Praktikum der Metallkunde
und Werkstoffprufung fiir Studierende des Fachrichtungen
Metallkunde und Metallphysik, Huttenwesen.
Maschinenkunde und Werkstoffkunde. xv, 272p. 1965.
Springer, N. Y.
Training in metallography and raw materials testing for
the professional courses in metal science, metal physics, metallurgical
engineering, machine science and raw materials science.
Webster, R. R., et al. "Automatic" flaw inspection,
19p. 1965. ASM, Metals Park, Ohio (Techn. Rept. no.
D5-10.1).
W'eigel, Hans-Ulrich. Untersuchung iiber den Einfluss
einer kurzzeitigen. rekristallisierenden glubehandlung
auf die mechanischen und technologischen Eigenschaftcn
kohlenstoffarmer unlegierter dtinner Stahlbander,
untcr bcsondcrer Beriicksichtigung der Abschreckalterung.
69p. 1964. Techn. Hochsch., Aachen.
Dissertation. Investigations on the influence of a temporary
recrystallizcd annealing of mechanical and technological characteristics
of unalloyed, low carbon thin steel strips.
White, E. L. and Ward, J. J. Ignition of metals in
oxygen. 46p. 1966. Battelle Mem. Inst., Columbus,
Ohio. (DMIC Rept. 224).
58

WUkening, Hermann. Die Ermittlung der radialen
laspelbelastung beim Wickeln von bandfbrmigem.
31p. 1965. Techn. Hochsch., Aachen.
Dissertation. Investigation of radial reel stress of band
haped coils.
Williams, R. V. and Dalton, B. L. Use of an electr
ield to accelerate oil quenching, 20p. 1965. BISRA,
London (P/l/65).
Willingham, R. C. and W;illiams, J. Quantitative
sessment of scaling and other surface effects during
heating in a furnace fired by town gas. 15p. 1965.
BISRA, London (DIS/18/65).
Willingliam, R. C. and Williams, J. Quantitative a
sessment scaling and other surface effects during heating
in an oil furnace. 44p. 1965. BISRA, London (DIS/
19/65).
WiVmer, A. and Salive, M. L. Factors influencing t
fatigue life of an Hy-80 composition steel fully
quenched and tempered to various strength levels. 29p.
1964. U. S. Navy, Washington, D. C. (Prog. rept. no.
1807).
Yokobori, T. Strength, fracture and fatigue of materials.
372p. 1964. Noordhoff, Groningen, The Netherlands.
$6.90.
Yutani, Nobuo. Factors influencing the degree of
surface effect resulting from EDM-example on AISI
4340 steel. 14p. 1965. ASM, Metals Park, Ohio (Tech.
Rept. no. D5-21-4).

Zahn, Rudiger. Stofftransport auf x-Eisen und seine
Abhangigkeit von Sauerstoffpotential der Atmosphare
Bestimmung der Oberflachenenergie und der Oberflachendiffusion
aus Beobachtungen der Korngrenzenfurchung
und Einebnung von Oberflachenprofilen, der
thermischen Atzung und des Sintems von Elektrotyteiscn.
176p. 1964. Bergakad, Clausthal.
Dissertation. Material transmission of x-iron and its relationship
to the oxygen potential of the atmosphere
Zbigniew, Bojarski and Leciejewicz, Janusz. Neutron
diffraction investigation of some iron-tungsten
carbides, lip. 1965. Institute of Nuclear Research,
Warsaw. (Rept. no. 665/II/PS).
Zimmermann, Ernst. Werkstoffkunde und Werkstoffpriifung.
Ein Lehrbuch fiir Ingenieurschulen und
ahnliche technische Lehranstalten und zum Selbstunterricht.
16th. ed. 286p. 1966. Schroedel-Hanover.
18.S0 DM.
Raw materials science and testing. Textbook for engineering
schools and similar technical professional and self study
schools.
Zukas, Eugene G. Shock wave strengthening. 46p.
1966. ASM, Metals Park, Ohio (Tech. rept. no. W6-
2.3).
WILDING
British Steel Castings Research Association. Recommended
procedure for the welding of steel castings by
the metal-arc process, vi. ISp. 1964. The Assn. "
field. 15/-.

Henry, Otto Hazelton. Welding metallurgy; carbon
and alloy steels. Ed. by George E. Linnert. Ed. 3. 484p.
1965. American Welding Soc, N. Y. $12.
Htckey, R. L., et al. Compatibility of structural steel
of different chemical compositions and strength levels
in weldments. 20p. 1965. ASM, Metals Park, Ohio.
(Tech. Rept. no. D5-11.7).
Lancaster, John Jr. Metallurgy of welding, brazing
and soldering. 291p. 1965. American Elsevier, N. Y.
Linnert, George E. Welding metallurgy, carbon and
alloy steels. V. 1: Fundamentals. (Ed. 3) 474p. 1965.
American Welding Society, N. Y. $12.
Linnert, George E. Welding metallurgy, rev. ed.
484p. 1966. American Welding Society, N. Y. $12.
Resistance Welder Manufacturers' Association. Annular
projection welding of tubular sections to low carbon
steel sheet. 1966. The Assn., Philadelphia. SI.
Travaux. La route (Special Issue) 148p. 1965
Science et Industrie, Paris. 25 Fr. fr.
The road. Includes present trends in steel bridge construe
tion and welded steel highway bridges.
Uchida, Jack M. Welding high-strength low alloy
and nickel-cobalt steels. 18p. 1965. ASTME. Dearborn
Mich. (Paper no. 747).
Zentralinstitut fur Schweisstechnik der DDR, Sch
weissbarkeit der Stahle 3. Internationales Kolloquim
Weimar, 1963. v. p. 1963. The Institute, Halle (Saale)
(Technisch wissenschaftliche abhl. no. 23).
Welding of steel. 3rd International Colloquim. Weimer, 1963
61

UNITED STATES GOVERNMENT PUBLICATIONS
Availability abbreviations for U.S. Government Report* and Mr*
laneous TramlaUons.
BIS SecHMSO
B1SI Iron and Steel Institute. 4 Crosveoor Gardens. London Stt*
CFSTI Clearinghouse for Federal Scientific and Technical I&fe.
mulion, V. S. Department of Commerce, SpnotSdd, Vt
221"!
According to a recent chance in policy. CFSTI doewnctn
are now sold al a standard price rather than the row
quoted below. All printed documents are priced at Sift)
Microfiche copies are available at SO.65 each.
ETC European Translations Centre. 101 Doclcn>traat. Drift,
Netherlands.
IIB Henry Bmtcher. Technical Translations, P.O. Box 1ST,
Aliadena. California 91001.
HMSO Her Majesty's Stationery Office, London.
JCI. Special Libraries Association Translation Center, Job
Crerar Library, 35 West 33rd Street, Chicago, Jllaoo
60616.
NLL National Lending Library for Science and Tcchnolojv.
Boston Spa. Yorkshire. England.
Sup.
AD-26S27:
of Doc. Superintendent
Influence
of
of
Document'.
mechanical
V. S.
fibering
Government
on
Prfflaaf,
brittle
fracture Office in hot-rolled Washington, steel D. C. plate, 20402. by B. M. Kapadia,
et al. Prog. rept. no. 2. 1961 (1966) CFSTI. He $2.60.
AD-269S62: On effects of carbon and manganese
content and of grain size on dynamic strength properties
of mild steel. Final rept., by J. M. Kraft and A. M.
Sullivan. 36p. 1961 (1966).
AD-443654: Plane strain fracture toughness by the
slow bend test and through thickness tensile propertics
of unwelded IS Ni (250) maraging steel plate
% inch thick being studied for use in large solidpropellant
booster rockets, by H. E. Romine. 4Sp.
1964. CFSTI. He $2.

AD-459403: Steels for piping systems with maximum
jressurcs of 10,000 psi, and operating between —150F
tnd +150F; by H. W. Mishler, 44p. 1964. CFSTI.
r!cS2.
AD-45295S: Experimental determination of the
•amma ray angular dose albedos of concrete, aluminum
and steel, by T. J. Jones, et al. 46p. 1964. (1966)
CFSTI. $4.60.
AD-453994: High-rate loading: effect on mechanical
properties of Cr-Mo-V and 4340 steel at ambient temperature.
Tech. Rept., by Hubert H. Cadler. 34p. 1964
(1966) CFSTI. $3.60.
AD-462S96: Structural studies of bearing steel un
dergoing cyclic stressing. Summary rept. no. 1, by J.
A. Martin, et al. 166p. 1965. CFSTI. He $4.
AD-466S05: Interpretative report on weldmetal
toughness. Final rept., by K. Masubuchi, et al. 86p.
1965. CFSTI. He $3., Mf $.75.
AD-46697S: Effects of ultrasound on deformation
characteristics of structural metals, 1 July 1963 — 30
June 1964. Pt. 3: Acoustic softening at high strain
rates. Tech. prog, rept., by S. R. Colberg and B. Langenecker.
13p. 1965. CFSTI. He $1., Mf $.50.
AD-467156: Rapid control analysis of lS-per cent
nickel maraging steels by x-ray spectrometry, by
Bernard J. Alley. 24p. 1965. CFSTI. He $2.60, Mf
$.50.
AD-467523: Effect of inelastic tensile prestrain
the brittle fracture properties of annealed 4140 steel,
by D. W. McLaughlin. 54p. 1965. CFSTI. He $5.60,
Mf $.50. (Tech. rept. MTI-65 TR21).
63

AD-470969: Protective coatings for steel piling;
correlation of results of parallel test exposures at Port
Hueneme and Guam, by C. V. Brouillette and R. L.
Alumbough. 29p. 1965. CFSTI. He $2., Mf $.50.
AD-473496: Micro and macrocrack formation. Piog.
rept. no. 7, by B. L. Averbach. 40p. 1965. CFSTI. He
$2., Mf $.50. (SSC-171).
AD-475863: Effects of three aqueous environment
of high-stress low-cycle fatigue of an 18% nickel
maraging steel. Memo, rept., by C. D. Beachem, et al.
29p. 1965. CFSTI. He $2.60, Mf $.50.
AD-608334: Steel corrosion mechanisms, growth ami
breakdown of protective films in high-temperature
aqueous systems, studies with 15% NaOH at —316°C,
by M. C. Bloom and others. 11, 2p. 1965. CFSTI. 1.
(NRL Rept. 6082).
AD-611S00: Control of cast grain size of steel castings.
Interim rept., August 16,1963 — August 15,1961,
by P. Wieser, et al. CFSTI. $3. Cy, 75 cents mn.
AD-612159: Effect of pressure on the structure and
properties of metals by T. E. Davidson, et al. I5p.
1964. CFSTI. $1. Cy, 50 cents mn.
AD-614451: Interactions of 14.6-Mev neutrons in
iron, li and carbon. Tech. rept., Oct. 1,1963 — Sept. 30,
1964. by G. T. Western, et al. 12Sp. 1965. CFSTI. S4
cy, $1. mn.
AD-614S99: Irradiation effects on reactor structural
materials. No. 1, 1964—Jan. 31, 1965, by L. E. Steele,
et al. 25p. 1965. CFSTI. $1. cy, $.50 mn.
AD-617319: Irradiation effects on reactor structural
materials. Feb. — 30 April 1965. Qtly. prog. rept. by
L. E. Steele, et al. 32p. 1965. CFSTI. $2. cy, $.50 mo.
64

AD-620136: Cooling transformations in certain uranum-bearing
steels, by E. P. Klier and J. R. Hawthorne.
\, 18, 4p. 1965. CFSTI. $1. (NRL Rept. no. 6240).
AD-62190: Occlusion of various refractory materia
a chromium plate on steel substrates, by Francis X.
Hassion and Joseph Szanto. 43p. 1965. CFSTI. $2. cy,
5.50 mn.
AD-623567: Electron microscope fracture examination
to characterize and identify modes of fracture, by
C. D. Beachem. 124p. 1965. CFSTI. $4. cy, $.75 mn.
AD-623844: Effect of elastic and plastic deformat
on the martensite transformation of 25% Ni maraging
.alloy single crystals. Final tech. rept., by J. D. Defilippi
and H. W. Paxton. ISSp. 1965. CFSTI. He $5., Mf $1.
AD-624017: Predicting the intergranular corrosion
of austenitic stainless steels. Tech. rept., by W. D.
France, Jr. and N. D. Greene. 27p. 1965. CFSTI. He
$2., Mf $.50.
AD-624267: Deformation characteristics of metals
and alloys. Final rept., by V. Weiss, et aJ 103p. 1965.
CFSTI. He $4., Mf. $.75.
AD-624691: Inverse magnetostrictive effect of ultrasonic
stress waves in steel. Research rept.. by B.
Langenecker. 9p. 1965.
AD-624872: Paramagnetic resonance of trivalcnt Fe
57 in double nitrate crystals, by J. W. Culvahouse and
L. C. Olsen. 6p. 1965.
AD-6249S0: Fe 54 (N, P), (N, Alpha) and (N, 2N)
cross section, by S. R. Salisbury and R. A. Chalmers.
6p. 1965.

AD-6249S7: Investigation of solidification of high.
strength steel castings. Interim rept.; 1 Oct. 1963-
30 Sept. 1964, by R. V. Barone, et al. S4p. 1964. CFSTI
He $3., Mf $.75.
AD-625156: Ferrous arc welding. Pt. I: A correla
tion of the literature on weldability. Rept. on welding
tests on structural and rail steel. 75p. 1951. (19661.
CFSTI. Mf $.75.
AD-625250: Auroras and iron deposits, by 0. Mot
skov and V. Lyustiberg. op. 1965. CFSTI. He $1., Mf
$.50.
AD-625293: Influence of heat treatment on thepby
siomechanieal properties of steels of the austenite-mar.
tensite class, by V. S. Postnikov, et al. 14p. 1965
CFSTI. He $1., Mf $.50.
AD-625374: Metallurgical characteristics of high
strength structural materials. Qtly. rept. no. 8, May -
July 1965, by P. P. Puzak, et al. 99p. 1965. CFSTI. He
$3., Mf $.75.
AD-625747: Total neutron cross sections of copper
iron and aluminum near 14 Mev, by Jesse C. Albergotti
and James M. Ferguson, lip. 1965. CFSTI. SI
cy. $.50 mn.
AD-625800: Plasma-jet coating of tungsten on steel
Final rept. 6 Feb. 1961 —30 April 1962, by Richard L.
Landingham, et al. 137p. 1962. CFSTI. He $4., Mf SI.
AD-625900: Occurrence and prevention of corrosion,
by Willard E. Edwards, lip. 1965. CFSTI. He SI
Mf $.50.
AD-625912: Anelastic techniques: iron, a case history.
Tech. rept., by Daniel N. Beshers. 55p. 1965
CFSTI. He $3.. Mf $.50.
69

AD-626013: Stress-corrosion susceptibility of ultrahigh
strength steel evaluated in terms of fracture
toughness. Tech. res. rept., by Joseph II. Mulherin
and Edward H. Hess. 35p. 1965. CFSTI. He $2., Mf
$.50.
AD-626186: Development of a rust removing corrosion
preventative. Final Tech. rept. 21 May 1964 —
20 May 1965, by David B. Boies. 44p. 1965. CFSTI.
He $2., Mf $.50.
AD-626225: Solidification of iron base alloys at
degrees of undercooling. Interim rept. 1 Oct. 1964 —
30 Sept. 1965, by T. Kattamis and M. C. Flemings.
120p. 1965. CFSTI. He $4., Mf $.75.
AD-626329: High field magnetic moment and antiferromagnetic
resonance measurements in alpha
Fe 203, CoF2, FeF2 and (MNF2) 1-X (ZNF2) X,
by S. Foner. 7p. 1965.
AD-626375: Investigation of fracture in connectio
with hot deformation processing of metals. Final rept.,
by Nicholas J. Grant, et al. 3Sp. 1965. CFSTI. $2. cy,
$.50 mn.
AD-626466: Irradiation effect on reactor structur
materials, 1 Aug. — 31 Oct. 1965, by L. E. Steele, et
al. 29p. 1965. CFSTI. He $2.. Mf $.50.
AD-626547: Chemical equilibrium of ferric iron in
sodium chloride medium, by Tsaihwa J. Chow. 4p.
1966.
AD-626602: Harmonic analysis method for the
nondestructive determination of case depth of carburized
steel. Tech. rept., by K. A. Fowler and H. P.
Hatch. 36p. 1965. CFSTI. He $2.. Mf $.50.
67

AD-626SS1: Experiments on high strength steel
members. The experimental behavior of restrained columns,
by Peter F. Adams, et al. 44p. 1965. Welding
Res. Council, N. Y. $2.
AD-626994: Welding tests on structural and rail
steel. (CW 1.018). Ferrous arc welding effects of hy.
drogen and related variations on the physical properties
of welds on structural steels. 146p. 1962.
(1966). CFSTI. $1.
AD-627111: Electroslag remelting deserves constant
attention. 7p. 1966. CFSTI. He $1., Mf $.50.
AD-627121: Heat treatment of high strength steels
with the use of electrical heating, by Yu. B. Andreev,
et al. 12p. 1966. CFSTI. He $1., Mf $.50.
AD-6271S0: Study of iron impurity in silver chloride
using mainly the mossbauer effect, by D. H. Lindley
and P. G. Debrunner. 43p. 1965. CFSTI. He $2.,
Mf $.50.
AD-627197: Low-temperature antiferromagnetic resonance
in alpha Fe 203, by Foncr, S. and Williamson,
S. J., 5p. 1964.
AD-627281: Mossbauer study of CO 57 (FE 57) in
cobaltous oxide at high pressure, by C. J. Coston, et
al. lip. 1965. CFSTI. He $1., Mf $.50.
AD-6273S2: Influence of test temperature and solute
additions on the plastic flow and strain hardening
of alpha iron, by John Nunes. 69p. 1965. CFSTI. He
$3., Mf $.75.
AD-627459: Mossbauer studies of spin flop in antiferromagnetic
hematite, by N. Blum, et al. 4p. 1965.

AD-627575: Notch strength of heat-treated 4340
steel as affected by subsequent cold drawing and
aging, by Eugene Di Pesare. 19p. 1965. CFSTI. He
$4., Mf $.50.
AD-62778S: Effect of iron vacancies on the diffusion
of interstitial carbon in Fe C alloys, by Arthur C.
Damask and Richard A. Arnd. 18p. 1964.
AD-627S11: Dislocation distributions in fatigued
single crystals of 3.25% silicon iron. Tech. rept., by
Kent Randall Carson. 119p. 1966. CFSTI. He $4., Mf
$.75.
AD-62S063: Dynamic tests of model steel structures.
Final rept. 18 March 64 — 30 Nov. 65, by Wayne L.
Stewart, et al. 140p. 1965. CFSTI. He $4., Mf $1.
AD-628154: Fatigue and static properties of butt
welds in structural steels, by L. A. Harris and G. E.
Nordmark. 113p. 1954 (1966) CFSTI. Mf $.75.
AD-628284: Ferrous arc welding. Pt. II: Selected abstracts
from the literature. Rept. on welding tests on
structural and rail steel, by L. A. Harris and W. C.
Hoeltje, Jr. 291p. 1951 (1966) CFSTI. He $28.70,
Mf $4.50.
AD-62S3S7: Investigation of thermal and mechanical
stability of mold materials for steel castings. Interim
tech. rept., 27 June 64 — 30 June 65. 45p. 1965. CFSTI.
He $4.60, Mf $.50.
AD-628538: Investigation of some techniques for
the nondestructive evaluation of sintered iron powder
compacts. Tech. rept., by R. H. Brockelman. 43p. 1966.
CFSTI. He $2., Mf $.50.
AD-628742: Specific heat of Fe 3 (P04) 2.8 HrO, by
H. Forstat, et al. 5p. 1965.

AD-62SS24: Internal conversion in Fe 57 from the
Mossbauer effect in iron, by R. M. Housley and R. H,
Nussbaum. lip. 1964.
AD-628S25: Mean-square nuclear displacement of
Fe 57 in Zn from the Mossbauer effect, by R. M.
Housley and R. H. Nussbaum. lip. 1964.
AD-62SS26: Iron (III) extraction by nitrobenzenebenzene
mixtures, by R. L. Erickson and R. L. Mc­
Donald, lp. 1963. (1966).
AD-62S979: Effects of tempering above the lower
critical temperature a sub CI on the properties of an
Hy-SO steel. Prog. rept. no. 6, by Abner R. Willner
and Marcel L. Saliv. 29p. 1966. CFSTI. He $2, Mf
$.50.
AD—629437: Atomic wave functions collision crosssections
and transition probabilities of Fe irons, by
T. K. Krueger and S. J. Czyzak. 40p. 1964 (1966>
(ARL-65-190).
AD-629753: Reduction of an iron core concentrate
with hydrogen in a screen packed fluidized bed, by G.
L. Osberg and T. A. Tweddle. 5p. 1965 (NRC8794).
AD-6297S7: On the fatigue limit behavior of iron
and mild steel. Final rept. June 62 — March 65, by
Attwell M. Adair and Harry A. Lipsitt. 23p. 1965.
CFSTI. He $1., Mf $.50.
AD-629912: Investigation of electropolishing solution.
Tech. rept., by William C. Jones. 37p. 1965.
CFSTI. Cy $2., Mf $.50.
AD-630048: (He3, T) Investigations of iron, nickel
and zirconium, by A. I. Yavin, et al. 15p. 1966. CFSTI.
He $1.60, Mf $.50.
70

AD-630464: Effect of tempering on the strength,
hardness and notch toughness of Hy 130/150, 5 Ni-Cr-
Mo-V steel. Phase rept., by W. H. Asche and M. R.
Cross. 22p. 1966. CFSTI. He $1., Mf $.50.
AD-630661: Relation of surface effects to the mec
anical behavior of metals. Tech. summary rept. 1
Feb. — 30 July 65, by I. R. Kramer. 77p. 1966. CFSTI.
He $3.,Mf $.75.
AD-630871: Starter cracks for fracture toughness
testing by a resonance fatigue technique. Final memo
rept., by M. R. Achtcr, et al. 9p. 1966. CFSTI. He $1.,
Mf $50.
AD-630937: Irradiation effects on reactor structural
materials. Qtly. prog. rept. 1 Nov. 65 — 31 Jan. 66,
by L. E. Steele, et al. 43p. 1966. CFSTI. He $4.60, Mf
$.50.
AD-630949: Effect of surface on the mechanical properties
of metals. Summary rept. 1 Feb. — 31 Oct. 65.
by Irving R. Kramer. 49p. 1966. CFSTI. He $2., Mf
$.50.
AD-630959: Microyielding in iron at low temperatures.
Rev. ed., by R. Kossowsky and N. Brown. lOp.
1965.
AD-631422: Stress aging: A new treatment for alloys.
Pt. 4: Comparison of standard tensile properties
for single vs duplex stress aging (three ultrahighstrength
steels). Tech. rept, by Richards H. Harrington.
35p. 1966. CFSTI. He $1., Mf $.50.
AD-631481: Mossbauer studies for divalent and tri
valent Fe 57 in CoSo4 and CoSo4.7 HzO, by R. Ingalls,
et al. 18p. 1966. CFSTI. He $1.60, Mf $.50.
71

AD-631632: Investigation of stiffened steel plates
Final rept., by Thein Wah. 186p. 1966. CFSTI. HcS5,
Mf $1.
AD-63170S: Influence of interstitial impurities oo
the low-temperature strength and ductility of bodycentered
cubic metals. Final rept. 14 May 63 — March
66, by D. F. Stein and J. R. Low, Jr. 28p. 1966. CFSTI.
He $2.60, Mf $.50.
AD-631792: Study of low-temperature failures in
high-purity iron single crystals, by D. S. Tomalin and
D. F. Stein. 8p. 1965. (CAROD-4074:4).
AD-631850: Application of the method of composition
to stress-rupture data on steel. Memo rept., by
James G. Faller. 14p. 1965. CFSTI. He $1., Mf $.50.
AD-631S51: Reports of the Academy of Sciences of
the Ukrainian SSR (Selected articles). 23p. 1966.
CFSTI. He $1., Mf $.50.
AD-631952: Chemical milling of alloy steels, by
Sara J. Ketcham. 23p. 1966. CFSTI. He $1., Mf $.50.
AD-632004: Fatigue of plates and weldments in
high strength steels. Qtly. rept. for 1 Dec. 65—28
Feb. 66. 36p. 1966. CFSTI. He $2., Mf $.50.
AD-632039: Effect of carbon on the strain rate sensitivity
of iron single crystals. Rev. ed., by D. F. Stein.
9p. 1965. (AROD-407401).
AD-632042: Das Dreistoffsystem Eisen-Aluminum-
Bor, H. H. Stadelmaier, et al. 2p. 1965.
Tertiary metallic system, iron-aluminum boron.
AD-632072: Properties of the weld heat affected zone
in Hy-130/150 steel. Research and dev. phase rept., by
P. W. Holsberg and W. G. Schreitz. 15p. 1966. CFSTI.
He $L, Mf. $.50.
72

AD-632355: Effect of thermal history on the yield
behavior of iron, by Attwell M. Adair, et al. 9p. 1965.
AD-632S31: Development of practice for composite
rolling of structural metal panels. Qtly. rept. no. 1,
by J. R. Van Orsdel, et al. 27p. 1966. CFSTI. $2. cy,
$.50 mn.
AD-632926: Fracture toughness evaluation of titanium,
aluminum, and steel. Memo, rept., by John
W. Forney. 16p. 1966. CFSTI. He $L, Mf $.50.
AD-633214: Interior corrosion of steel five gallo
military water cans. Tech. rept. July 65 — Feb. 66,
by Jo-*ph R. Urbanek. 24p. 1966. CFSTI. He $1.,
Mf $.50.
AD-633300: Yielding of steel studied by ultrasonics.
Tech. rept., by D. A. Koss and R. B. Gordon. 39p.
1965. CFSTI. He $2., Mf $.50.
AD-633664: Extrusion steel and field of their ope
tion, by L. A. Poznyak and A. M. Rogalev. 17p. 1966.
CFSTI. He $1., Mf $.50. (FTD-TT-65-1417; TT-66-
6142).
AD-633725: Mossbauer effect in iron-carbon and
iron-nitrogen alloys Tech. rept., by P. M. Gielen and
Roy Kaplov. 63p. 1966. CFSTI. He $3. Mf $.75.
(TR-10, DSR-7618).
AD-6337S5: Potential applications of radio-isotop
in the navy by L. B. Gardner, et al. 35p. 1966. CFSTI.
$2. cy, $.50 mn.
AD-633S86: Studies of metal-ceramic reactions in
high strength steel cast alloys. Interim tech. rept. for
Dec. 64 — 30 Nov. 65, by David R. Muzyka and
George A. Colligan. 72p. 1965. CFSTI. He $3., Mf $.75.
73

AD-634094: Metallurgical characteristics of high
strength structural materials. 9th Qtly. rept., by R. J.
Goode, et al. 104p. 1965. CFSTI. He $4., Mf $.75.
(NRL-6405).
AD-634156; Tropical exposure of finishing systems
for ferrous metals. Prog, rept., by Melvin H.
Sandler. 70p. 1966. CFSTI. He $2., Mf $.75.
AD-634220: Transformations in Fe-Cr alloys, by
J. N. Wallbridge and J. Gordon Parr. 4p. 1965.
In Jr. Iron and Steel Institute, 204:119-21, Feb. 1966.
AD-634343: Control of cast grain size of steel castings:
effect of grain refinement on properties. Interim
rept. 16 Aug. 64 — 30 Sept. 65. 81p. 1965. CFSTI.
He $3., Mf $.75.
AD-634697: Influence of impurities and rare-earth
elements on the properties of alloys, by M. V. Pridantsev.
230p. 1962. CFSTI. $6. cy, $1.25 mn.
AD-634747: Mechanical and metallurgical behavior
of restrained welds in submarine steels. Final rept., by
Clyde M. Adams, Jr. and D. A. Corrigan. 82p. 1966.
CFSTI. He $3., Mf $.75.
AD-635081: Investigation of the influence of deoxidation
and chemical composition on notched bar
properties of semi-killed ship steel. Final rept. and
prog, rept., by H. M. Banta, et al. 103p. 1952 (1969)
CFSTI. He S4., Mf $.75. (SSC-49).
AD-635082: Brittle fracture of mild steel in tension
at 196°C. Prog, rept., no. 3. by W. S. Owen, et al. 40p.
1957 (1966). CFSTI. He $2., Mf $.50.
AD-6350S7: Low cycle fatigue crack propagation
characteristics of high strength steels. Tech. res. rept.,
by Carl M. Carman and Jessie M. Katlin. 38p.
CFSTI. He $3., Mf $.50.
74

AD-635107: Evaluation of notch sensitivity of mild
teel plates by direct explosion test. Final rept., by G.
.. Mikhalapov. 29p. 1951. (1966). CFSTI. He $2.60,
.If $.50. (SSC-43).
AD-635108: Causes of cleavage fracture in ship
)late, high yield strength structural steel. Final rept.,
>y A. Boodberg and E. R. Parker. 92p. 1949. (1966).
;FSTI. He S3., Mf $.75. (SSC-28).
I AD-635109: Effect of cyclic-stress on the transition
•emperature of steel. Final rept., by II. E. Jacques.
I4p. 1949. (1966). CFSTI. He $4.60, Mf $.50.
AD-635149: Metallurgical quality of steels used for
lull construction. Prog, rept., by C. E. Sims, et al.
$4p. 1947. (1966). CFSTI. He $4., Mf $.75. (SSC-13).
AD-635172: Twelve inch flat plate tests. Prog, rept.,
>y Samuel T. Carpenter, et al. 121p. 1949. (1966).
CFSTI. He $4., Mf SI. (SSC-21).
AD-635182: Metallurgical quality of steels used for
steel construction. Final summary rept., by C. E. Sims,
ft al. 62p. 1947. (1966). CFSTI. He $3., Mf $.75.
(SSC-11).
AD-635300: Influence of alloying elements on the
carbon activity in steel. Final rept. 1 July 61 — 31
Dec. 65, by David A. Stevenson and Richard R. Zupp.
31p. 1965. CFSTI. He $2., Mf $.50. (AROD-3145:l).
AD-635466: Inoculation of nodular iron with yttrium
silicide nodulizing agent. Tech. rept., by Wade C.
Wurtz. 20p. 1966. CFSTI. He $1., Mf $.50. (RIA-66-
1190).
AD-635478: Determination of the isothermal transformation
diagram for high carbon M-2 tool steel, by
L. M. Markowitz and M. H. Richman. 14p. 1966.
CFSTI. He $1., Mf $.50.
75

AD-635630: Some effects of nitrogen on the resistance
to stress corrosion cracking of type 304 stainless
steel wires. Tech. paper, by Walter A. Mannheimer
and Harold W. Paxton. 16p. 1966. CFSTI. He $1,
Mf $.50.
AD-635696: Low-cycle fatigue behavior of axially
loaded specimens of mild steel. Prog. rept. no. 3, by
J. T. P. Yao and W. H. Munse. 80p. 1963. CFSTI. He
$3., Mf $.75. (SSC-151).
AD-636152: Role of oxygen in the brittle behavior
of metals. Prog. rept. no. 13,1 July 65 — 31 March 66.
by Edwin S. Tankins. S4p. 1966. CFSTI. He $3., Mf
$.75.
Includes iron alloys.
AD-6366S3: Study of the transformational characteristics
and the weldability of Hy-80 steel. Qtly. prog.
rept., 1 March — 1 June 1962. 16p. 1962. (1966). CF
STI. He $1., Mf $.50.
AD-636765: Corrosion and cathodic protection of
underwater surveillance systems — a general review
of the problem. Memo, rept., by B. F. Brown, et al.
lOp. 1963. CFSTI. He $1., Mf $.50.
Includes steel and iron alloys.
AD-6367S7: Comparison of theory and experiment
for shielding by a structure against fallout radiation.
Rept. no. 1, by K. Preiss and A. B. Chilton. 55p. 1966.
CFSTI. $3. cy, $.50 mn.
AD-636788: Monte Carlo calculation of self-shielding
by encapsulated gamma-rav sources. 50p. 1966.
CFSTI. $2. cy, $.50 mn.
AD-637044: Second corrosion survey of steel sheet
piling. Tech. rept., by C. V. Brouillette and A. E.
Hanna. ISp. 1966. CFSTI. He $1., Mf $.50.
7fl

; AD-637143: Exhaustion of ductility under notch
constraint following uniform prestraining. Prog. rept.
no. 5, by C. Mylonas, et al. 50p. 1966. CFSTI. He $2.,
Mf $.50. (SSC-173).
AD-637217: Effect of strain rate on yielding in highstrength
steels. Tech. rept., by David P. Kendall and
Thomas E. Davidson. 35p. 1966. CFSTI. He $2., Mf
$.50.
AD-638216: Short-range forces in alloys. Final rept.,
by Leonid V. Azaroff. 7p. CFSTI. He $1., Mf. $.50.
Includes iron alloys.
AD-637378: Investigation of steel and alloys: selected
articles, by L. N. Larikov, et al. 19p. 1966. CFSTI.
He $1., Mf $.50.
AD-637671: Effects of ferromagnetism and local order
on electrical resistivity of Au-Fe alloys. Tech.
rept, by R. Sundahl, et al. 5p. 1965.
In Jr. of Applied Physics. 37: 1024-25, March 1, 1966.
AD-63S506: Problems of pitting in austenitic Cr-Ni
steels, by H. Grafen. 22p. 1966. CFSTI. He $1., Mf
$.50. (TT-66-62165).
AD-638620: Effect of tungsten composition on the
mechanical properties of the W-Ni-Fe heavy alloy.
Interim sci. rept., by Joseph W. O'Neil and Phillip N.
Salyer. 37p. 1965. CFSTI. He $2., Mf $.50. (AFOSR-
66-1670).
AD-63S621: Operation of brittle fracture mechanisms
in ductile metal composites. Interim sci. rept., by
John P. Kershaw and Lawrence A. Shepard. 24p. 1965.
CFSTI. He $1., Mf $.50.
77

AD-638900: Statistical and mctallographical study
of mechanical properties of ferritic magnesium cast
iron, by A. M. Gupta, lip. 1966. CFSTI. He $1., Mf
$.50. (TT-66-62239).
AD-639001: Dislocations in martensite inherited
from austenite. Rev. ed., by J. C. Shyne and W. D. Nit.
3p. 1965. (AROD-3163:l).
AD-639195: Hydrogen, oxygen, and sub-critical
crack growth in a high strength steel. Final rept., bv
G. C. Hancock and H. H. Johnson. 21p. 1965. (NRL
TM-278).
AD-639216: Relationship of nitrogen content of a
high purity 20-20 austenitic stainless steel to stress
corrosion. Final rept., 1 July 1963 — July 1966, bv
John F. Eckel, et al. 25p. 1966. CFSTI. He $1., Mf $50.
(AROD-4099.2).
AE-221: Swedish work on brittle fracture problems
in nuclear reactor pressure vessels, by M. Grounes.
50p. 1966.
AECL-2566: Wear and corrosion in water. Sop.
1966. AECL $2.
AERE-R-4535: Angular distribution of neutrons
scattered at small angles by ferromagnetic spin waves,
by M. W. Stringfellow. 46p. 1966. BIS $1.20, HMSO
6s.
AERE-R-4942: Equilibrium oxygen pressure over
stainless steels and its relation to reactor fuel stability,
by E. J. Mclver and S. S. Teale. 30p. 1965. BIS $.90.
AERE-R-5097: Paper 14: Preparation of thin selfsupporting
enriched iron targets, by S. Gorodetzky and
R. S. Drouin. Sp. 1965. BIS $5.40. HMSO 27s Od.
7$

AERE-Trans-1035: Identification of kink bands in
plastically deformed laminer pearlite, by M. Proeger.
BIS $.30.
AES-3: Studium av straeekgraensen i mjukt stal, by
G. Oestberg and R. Attermo. 17p. 1963.
Study of the tensile strength in soft steel.
AFCRL-66-33: Growth of single crystals, by C. S.
Sahagian. 61p. 1966.
AFMDC-66-2: Grinding ratios for aerospace alloys,
by Michael Field and John F. Kahles. 14p. 1966.
AI-Trans-84: On the eddy current lag of magnetic
contact processes, by W. Wolman and R. Kaden. 13p.
(1965). JCL fs $1.60, Mf $.80.
AI-Trans-208: New intermetallic compound in the
binary system Fe, Mo, by R. P. Zaleteava, et al. 4p.
1951. (1966). CFSTI. $1. cy, $.50 mn.
AROD-4074:2: Influence of interstitial impurities on
the low-temperature strength and ductility of bodycentered
cubic metals. Final rept., by D. F. Stein and
J. R. Low, Jr. 25p. 1966.
ASRL-TR-132-2: Effect of tungsten composition on
the mechanical properties of the W-Ni-Fe heavy alloy,
by Joseph W. O'Neil and Phillip N. Salyer. 33p. 1965.
BAW-237: Steam cooled breeder reactor. Mechanical
and physical properties of selected high-temperature
materials, by A. L. Lowe, Jr. 50p. 1965.
BNL-8721: Passage of high-energy particles in matter-nuclear
cascades induced in dense media by 1- and
3- Gev protons, by S. P. Shen. 50p. 1964. CFSTI. $2.
cy, $.50 mn.
79

BNL-9264: Mobility of dislocations near the ductile
to brittle transition temperature in irradiated iron
by S. B. McRickard. 16p. 1965. CFSTI. He $1.60, U
$.50.
BNL-9644: Monte Carlo methods in resonance absorption,
by Melvin M. Levine. 30p. 1965. CFSTI. $2
cy, $.50 mn.
BNWL-154: Evaluation of iron and nickel base
alloys for medium and high temperature reactor applications.
Pt. II., by T. T. Claudson and H. J. Pessl
60p. 1965. CFSTI. $3. cy, $.75 mn.
BNWL-155: Evaluation of the corrosion resistance
of several high temperature alloys for nuclear ap
plications, by T. T. Claudson and R. E. Westerman.
26p. 1965. CFSTI. $2. cy, $.50 mn.
BNWL-1S4: Effect of temperature and strain-rale
of thermally activated deformation in high-purity alpha
iron, by F. A. Smidt, Jr. S4p. 1965. CFSTI. $3.
cy, $.75 mn.
CEA-R-27S3: Appareil de mesure du pouvoir tbermolectrique
et de la resistivite a haute temperature.
Resultats sur le fer Armco, by Michel Vandevyver, et
al. lip. 1965. Centre d'Etudes Nucleases. Saclay,
France.
Apparatus for measuring thermo-electric power and hitbtemperature
resistivity. Results concerning Armco iron.
CEA-R-2S40: Mesure des integrates de resonance
d'absorption (Mn, Fe, Co, Ni, Cu, Zr, Mo) by Rene
Vidal and Eduardo Cardoso Martinho. 43p. 1965.
Measurement of resonance absorption integrals.
80

CEA-R-2905: Etude au moyen de la resistivite d«s
•Icfauts ponctuels dans le fer pur, by Colette Minier-
Cassayre. 74p. 1965.
Thesis. Study of point defects in pure iron, by means of
•lectric resistivity.
CEA-R-2914: Dosage spectrographique de petites
cjuantites de bore dans le fer et les aciers a l'eide du
separateur d'ordes, by Jacques Emoult. 15p. 1966.
Spectrographs determination of small quantities of boron
in iron and steels by means of a predispersive spectrometer.
CONF-710: High-strength materials, ed. by Victor
F. Zackay. 879p. 1965. Wiley, N. Y. $22.
Proceedings of the Second Berkeley International Materials
Conference, 1964.
CONF-640818: Activation analysis principles and
applications, ed. by J. M. A. Lenihan and S. J. Thomson.
219p. 1965. Academic Pr., N. Y. $8.50.
CONF-650311-6: Determination of rare earth inclusions
in steel, by R. M. Raybeck and L. C. Pasztor.
24p. 1966.
CONF-650922: International Symposium on Magnet
Technology. Proceedings Sept. 8-10, 1965, ed. by H.
Brechna and H. S. Gordon. 856p. 1965. CFSTI. $8.50
cy, $3.50 mn.
CONF-660406-1: Fracture toughness determinations
of A-302B and Ni-Mo-V steels with various size specimens
by D. O. Mowbray. 37p. 1965. CFSTI. $2. cy,
$.50 mn.
COO-359-10: Diffusion in liquids and solids. Tech.
prog, rept., no. 1. 1963 — August 31, 1964, by Richard
E. Grace. 26p. 1964. CFSTI. $2. cy, $.50 mn.
COO-1198-230: Pressure and the electronic structure
of solids, by H. G. Drickamer. 21p. 1964. CFSTI. $1.
cy, $.50 mn.
81

COO-1198-237: Ferrous martensites, by C. M. Wayman.
3Sp. 1965. CFSTI. He $2., Mf $.50.
COO-119S-3S5: X-ray diffraction study of atomic
ordering in two sigma phases, by R. W. Spor, et al. 16
p. 1966. CFSTI. $1. cy, $.50 mn.
COO-1319-12: Study of the mechanism of stress
corrosion cracking in the iron-nickel-chromium alloy
system. Qtly. rept. 17 Dec. 63 — 16 Mar. 64, by F. H.
Beck, et al. 37p. 1964. CFSTI. He $2., Mf $.50.
COO-1319-15; Qtly. rept. 17 March — 16 June 64,
by F. II. Beck, et al. 56p. 1964. CFSTI. He $3., Mf
$.75.
COO-1319-27: Study of the mechanism of stress corrosion
cracking in the iron-nickel-chromium alloy system.
Qtly. rept. for 17 March — 16 June 1965. by R.
W. Staehle, et al. 43p. 1965. CFSTI. He $2., Mf $.50.
COO-1319-33: Microtopology of stress corrosion
cracking. Prelim, rept., bv T. J. Smith and R. W.
Staehle. 71p. 1965. CFSTI. $3. cy, $.75 mn.
COO-1319-34: Study of the mechanism of stress
corrosion cracking in the iron-nickel-chromium alloy
system. Qtly. rept. Sept. 17. 1965 — Dec. 16. 1965. by
R. W. Staehle. 41p. 1966. CFSTI. $2. cy, $.50 mn.
COO-1319-36: Microtopology of stress corrosion
cracking, by T. J. Smith and R. W. Staehle. 14p. 1966.
CFSTI. $1. cy, $.50 mn.
COO-1319-39: Study of the mechanism of stress corrosion
cracking in the iron-nickel-chromium system.
Qtly. rept. Dec. 17, 1965 — March 16, 1966. by R. W.
Staehle. 37p. 1966. CFSTI. $2. cy, $.50 mn.
62

COO-1477-1: Development of test procedures. Fracture
toughness of reactor pressure vessel steels. Prog.
rept. May 1 — July 31, 1965, by E. J. Ripling and
Phillip Crosley. 5p. 1965. CFSTI. $1. cy, $.50 mn.
COO-1477-2: Development of test procedures. Fracture
toughness of reactor pressure vessel steels, Aug.
1 _ Oct. 31,1965, by E. J. Ripling and Phillip Crosley.
14p. 1965. CFSTI. $1. cy, $.50 mn.
COO-1477-4: Fracture toughness of reactor pressur
vessel steels. Development of test procedures. May 1,
19r>4 _ May 1,1966, by E. J. Ripling and Phillip Crosley.
17p. 1966. CFSTI. $1. cy, $.50 mn.
CRDC-1216: Flame-in-tube atomic absorption spectrophotometry;
the determination of iron impurity in
terphenyl reactor coolant, by J. P. Mislan and S. J.
Mark. 20p. 1965. AECL $.50.
D-2734: Solubility of iron, nickel and cobalt in
liquid potassium and effect of oxygen gettering agents
on iron solubility, by James H. Swisher. 1, Up. 1965.
CFSTI. $1.
D-910092-6: Experimental refractive indices and
theoretical small-particle spectral properties of selected
metals, by P. J. Marteney, et al. 62p. 1965.
DMIC-219: Vacuum-degassed steels from the consumer's
viewpoint. 27 (3)p. 1966.
DMIC Report 219: Hydrogen movement in steel-entry,
diffusion, and elimination, by E. E. Fletcher and
E. R. Elsea. 8Qp. 1965.
EUR-2618f: Application de la coulometrie a potential
controle a des determinations dans des solutions
83

adioactive. Cas des solutions de produits de fission
et des combustibles irradies, by A. Denis. 33p. 1965.
Thesis. Application of controlled potential coulometry to
determinations in radioactive solutions. Case of fission product
and irradiated-fuel solutions.
EURAEC-1208: Methods for the fabrication of
pressure vessels. Qtly. rept. no. 11, Oct. 1 — Dec. 31,
1964. 69p. 1965. CFSTI. $3. cy, $.75 mn.
EURAEC-1252: Study of joints welded in very
thick steel plates. Qtly. rept. no. 1, July 1 — Sept 30,
1964. 14p. 1964. CFSTI. $1. cy, $.50 mn.
EURAEC-1277: Methods for the manufacture of
pressure vessels. Qtly. rept. no. 12, Jan. 1 — March 31,
1965. 76p. 1965. CFSTI. $3. cy, $.75 mn.
EURAEC-1296: Rustproof plating of heavy-gage
steels, Qtly. rept. no. 2, Oct. 1 — Dec. 31, 1964. lip.
1965. CFSTI. He $1., Mf $.50.
EURAEC-1297: Welding of very thick steels, Qtly.
rept. no. 13, Oct. 1 — Dec. 31,1964. 28p. 1965. CFSTI.
$2. cy.
EURAEC-1348: Study of base metal to be used
in research on brittle fracture of large welded assemblies.
Tech. rept. no. 4, Jan. 1 — March 31, 1965, 28p.
1965. CFSTI. $2. cyf $.50 mn.
EURAEC-1349: Study of embrittlement by plastic
fatigue of steels for reactor vessels. Qtly. rept. no. 5,
Jan. 1 — March 31, 1965. 47p. 1965. CFSTI. $2. cy.
Mf $.75.
EURAEC-1350: On the theory of notch brittleness
in steels occurring during time-to-rupture tests, by W.
Siegfried. 78p. 1965. CFSTI. $3. cy, $.75 mn.
84

EURAEC-1351: Stainless steel cladding of very
thick steels. Qtly. rept. no. 3, Jan. 1-March 31, 1965,
by S. A. Suodometal, Brussels, 34p. 1965. CFSTI. $2.
cy, $.50 mn.
EURAEC-1352: Welding of heavy-gage steels. Qtly.
rept. no. 14, Jan. 1-Apri] 15, 1965. 50p. 1965. CFSTI.
$2, cy, $50 mn.
EURAEC-1383: Influence of nitrogen in iron and
steel under fast neutron irradiation. Qtly. rept. no.
6, Jan. 1-March 31, 1965, by F. Rossi. 14p. 1965.
CFSTI. $1. cy, $.50 mn.
EURAEC-1387: Studies of steel corrosion in high
temperature water and steam. Qtly. rept. no. 11, Jan
1-March 31, 1965. 99p. 1965. CFSTI. $3. cy, $.75 mn
EURAEC-1394: Effect of radiation on the ductile
brittle transition in pressure vessel steels. Final rept
Dec. 15, 1960-Jan. 31, 1965, by E. Anderson, et al
52p. 1965. CFSTI. $3. cy.
EURAEC-1400: Study of the application of the
vertical welding process under electro-conducting slag
on thick steel plates in shop or field conditions. 68p.
1962. CFSTI. $3. cy, $.75 mn. (Special rept. no. 6).
EURAEC-1417: Development of a new method of
determining the brittle-ductile transition in steel
using small specimens, in particular with respect to
cmbrittlement by irradiation. Special tech. prog. rept.
M-65-876-30010, April 1, 1964-Sept. 30, 1965, by H. C.
van Elst. 28p. 1965. CFSTI. $2. cy, $.50 mn.
EURAEC-1424: Relationship of nitrogen content of
austenitic stainless steels to stress corrosion. Qtly. rept.
no. 4 by B. N. Ferry. 16p. 1965. CFSTI. He $1., Mf
$50.

EURAEC-1430: Influence of nitrogen in iron and
steel under fast neutron irradiation. Qtly. rept. no. 7,
April 1-June 30, 1965, by F. Rossi. 15p. 1965. CFSTL
$1. cy, $.50 mn.
EURAEC-1441: Study of cmbrittlement by plastic
fatigue in reactor vessels. Qtly. rept. no. 6, April 1-
June 30, 1965. 18p. 1965. CFSTI. $1. cy, $.50 mn.
EURAEC-1461: Study on embrittlement by plastic
fatigue in reactor vessel steels. Spec. rept. no. 3, Dec.
15, 1963-Dec. 31, 1964. S8p. 1965. CFSTI. $3. cy, $.75
mn.
EURAEC-1468: Methods for the fabrication of pressure
vessels. Qtly. rept. no. 13, April 1-June 30, 1965.
13p. 1965. CFSTI. $2. cy, $.50 mn.
EURAEC-1473: Methods in the fabrication of pressure
vessels. Qtly. rept. no. 14, July 1-Sept. 30, 1965.
13p. 1965. CFSTI. $1. cy, $.50 mn.
EURAEC-1475: Study on plastic fatigue embrittlement
of reactor vessel steels. Qtly. rept. no. 7, July
1-Sept. 30, 1965. 49p. 1965. CFSTI. $2. cy, $.50 mn.
EURAEC-14S1: Stainless steel plating of very thic
steels. Qtly. rept. no. 4, April 1-Jan. 30,1965. 43p. 1965.
CFSTL $2. cy, $.50 mn.
EURAEC-1518: Welded joints on heavy-gage steel
streets. Qtly. repts. 4-5. 19p. 1965. CFSTI. $1. cy.
$.50 mn.
EURAEC-1520: Studies on the brittle fracture
strength of heavy-gage steel plate. Final rept. no. 1,
by Prudhomme Constant. 29p. 1965. CFSTI. $2. cy,
$.50 mn.

EURAEC-1529: Influence of nitrogen in iron and
steel under fast neutron irradiation. Qtly. rept. no. 8,
July 1-Sept. 30, 1965, by F. Rossi. 9p. 1965. CFSTI.
$1. cy, $.50 mn.
EURAEC-1547: Study of plastic fatigue embrittlemcnt
of reactor vessel steels. Qtly. rept. no. 8, Oct. 1-
Dec. 31,1965. 46p. 1966. CFSTI. $2. cy, $.50 mn.
EURAEC-1548: Welding of very thick steels. Final
rept. 135p. 1965. CFSTI. $4. cy, $1. mn.
EURAEC-1556: Stainless steel cladding of heavy
gage steel. Qtly. rept. no. 5, July 1-Sept. 30, 1965. 5p.
1965. CFSTI. $1. cy, $.50 mn.
EURAEC-1558: New determination of the embrittlement
in steel using small specimens (0.2cc) in particular
with respect to irradiation. Prog. rept. M66-
17-50005, Oct 1-Dec. 31, 1965, by H. C. van Elst. 21p.
1966. CFSTI. $2. cy, $.50 mn.
EURAEC-1562: Study on residual stresses set up by
the vertical rise welding process. Final rept. no. 1. 71p.
1964. CFSTI. $3. cy, $.75 mn.
EURAEC-1569: Study of the base metal intended
for research on the brittle fracture of large weldments.
Qtly. rept. no. 7, Oct. 1-Dec. 31, 1965. 22p.
1966. CFSTI. $1. cy, $.50 mn.
EURAEC-1612: Investigation with regard to the
breaking strength of weldments on heavy gage tensile
steels, on the basis of fracture criteria which are in
turn based on the effect of the deformation velocity.
Qtly. rept. no. I, Sept. 1-Dec. 31, 1965, by H. Schnad't.
10p. 1965. CFSTI. $1. cy, $.50 mn.
87

EURAEC-1616: Study of the influence of initia
stress on isothermal stress relief tests. Special rept
no. 9. 13p. 1966. CFSTI. SI. cy, $.50 mn.
EURAEC-1617: New determination of embrittle
ment in steel using small specimens (0.2cc) in par
ticular with respect to irradiation. Prog. rept. Jan. 1
March 31. 1966, by H. C. van Elst. 25p. 1966. CFSTI
SI. cy, $.50 mn.
EURAEC-1624: Study of plastic fatigue embrittle
ment of reactor vessel steels. Qtly. rept. no. 9. 37p
1966. CFSTI. $2. cy, $.50 mn.
EURAEC-1639 Plutonium purification with iron ex
change resins. Special rept. no. 1. 143p. 1965. CFSTI
$4. cy, $1. mn.
Iron was one of the elements studied.
EURAEC-1670: Investigation with regard to the
breaking strength of weldments on heavy-gage hightensile
steels, on the basis of fracture criteria which
are in turn based on the effect of the deformation velocity.
Qtly. rept. no. 2, Jan. 1-March 31, 1966. 9p.
1966. CFSTI. $1. cy, $.50 mn.
EURAEC-1676: Relationship of nitrogen content of
austenitic stainless steels to stress corrosion. Qtly.
rept. no. 438-8, March 1-May 31, 1966, by B. N. Ferry
and J. F. Eckel. 26p. 1966. CFSTI. $2. cy, $50 mn.
EURAEC-1684: Application of the submerged arc
welding process to thick plates. Qtly. rept. no. 5, April
1-June 30, 1966, by C. Leymonie. 6p. 1966. CFSTI. $1.
cy, S.50 mn.
EURAEC-16S5: Stainless steel cladding of heavygage
steels. Special rept. no. 1, 12p. 1965. CFSTI.
$1. cy, $.50 mn.
88

EURAEC-1686: Austenitisation of PM24 steel. Spec.
rept. no. 15, 16p. 1966. CFSTI. $1. cy, $.50 mn.
EURAEC-1691: New determination of the embrittlement
in steel using small specimens (0.2cc) in particular
with respect to irradiation. Prog. rept. no. M-
66-596-50005, April 1-June 30, 1966, by H. C. van
Elst. 41p. 1966. CFSTL $2. cy, $.50 mn.
GA-6454: Research program on the effect of substructure
on the irradiation stability of ASTM A302
grade B steel. Qtly. prog. rept. no. 1, by T. I. Trozera
and P. W. Flynn. 12p. 1965. CFSTL $1. cy.
GA-6724: Research program on the effect of substructure
on the irradiation stability of ASTM A302
grade B steel. Qtly. prog. rept. no. 2, by T. A. Trozera,
ct al. 14p. 1965. CFSTI. SI. cy, $.50 mn.
GEAP-4678: Fracture mechanics and the stability
of engineering structures, by M. B. Reynolds. 55p.
1965. CFSTL S3, cy, $.50 mn.
GEAP-5014: Fracture toughness of some engineering
alloys, by M. B. Reynolds. 12p. 1966. CFSTI. $1.
cy, $.50 mn.
CEMP-54A: High-temperature materials program.
Prog. rept. no. 54, Pt. A. 73p. 1965. CFSTI. $3. cy,
$.75 mn.
GEMP-59A: High-temperature materials program.
Prog. rept. no. 59, PSA. 66p. 1966. CFSTI. $3. cy,
$.75 mn.
GEMP-384: Neutron cross section library for Monte
Carlo codes FMC-N 18-0 and 18-1, by L. S. Burns.
104p. 1965. CFSTI. $4. cy, $.75 mn.

CEMP-414: Physical metallurgy and oxidation behavior
of Fe-Cr-Al-Y alloys, by C. S. Wukusick. 22p.
1966. CFSTL $1. cy, $.50 mn.
1EA-84: Magnetic scattering of neutrons in ferromagnetic
samples containing absorbed hydrogen, by
Achilles A. Suarez, et al. 21p. 1964.
IS-1266: Thermal diffusivity of Armco iron by
three methods, by A. II. Shanks, et al. Sp. 1965
CFSTL $1. cy, $.50 mn.
JEN-146-DG/147: Analisis espectroquinico de lectura
directa de alcaconcs de magnesio, by M. Roca
Adell. 9p. 1964.
Direct-reading spectrochemical analysis of magnesium alloys.
A quantometer was applied to the determination of aluminum—iron—in
Magnox alloys.
JINR-P-2359: Prokhozhdenie ncitronov vysokikh energii
v zhelezovodnvkh smesyakh, by B. S. Sychev, et
al. 14p. 1965.
Passage of high energy neutrons in iron-aqueous mixtures
JPRS-2S849(p264-71): Nonmetalh'c inclusions in
steels with additions of rare earth metals, by Yee I.
Rubenchik and others. 1965. CFSTI. $7.
JPRS-28S49(p272-8): Deoxidation of steel with
lanthanum, cerium, praseodymium and neodymium,
by G. Kinne and others. 1965. CFSTI. $7.
KAPL-3108: Fatigue characteristics of Ni-Cr-Fe al
loys with emphasis on pressure-vessels cladding, by
D. F. Mowbray, et al. SSp. 1965. CFSTI. $3. cy, $.75
mn.
KN-65-140(R): Fast neutron activation analysis for
silicon in iron, bv D. E. Wood and N. J. Roper. 39p.
1965.
90

LA-DC-6833: Hydrogen embrittlement tests of cryogenic
metals, by R. L. Mills and F. J. Edeskuty, 6p.
1963. CFSTI. $1. cy, $.50 mn.
LA-DC-7692: GMX-2 spalling calculations, by
Charles L. Mader. 31p. 1965. CFSTI. $2. cy, $.50 mn'.
MLM-1172: Differential thermal analysis study of
impurities in plutonium, by D. E. Etter and L. J.
Wittenberg. 17p. 1963 (1966). CFSTI. $1. cy, $.50
mn.
MSAR-65-194: Effect of high temperature sodium
on austenitic and ferritic steels. Topical rept. no. 4.
Results of mechanical properties tests of 316SS specimens
in 1200F sodium contaminated with carbon, by
R. C. Andrews, et al. 135p. 1965. CFSTI. $4. cy, $1.
mn.
N64-32896: Research on elemental abundances in
meteoritic and terrestrial matter. Summary prog. rept.
Sept. 1, 1963-Aug. 31, 1964, by R. A. Schmitt. 13p.
1965. CFSTI. $.50.
N66-16380: Effects of hydrostatic pressure on the
mechanical behavior of body centered cubic refractory
metals and alloys. Interim, tech. rept. no. 3, by S. V.
Radcliffe. 2Sp. 1965. CFSTI. He $2., Mf $.50.
N66-18329 Effect of silicon and iron content on embrittlement
of a cobalt-base alloy (L-605), by R. L.
Ashbrook, et al. 13p. 1965. CFSTI. He $1., Mf $.50.
N66-1S360: Effect of variations in silicon and iron
content on embrittlement of L-605 (HS 205). CFSTL
N66-22929: Mechanical properties of type 202 stain
less steel at cryogenic temperatures, by J. L. Christian.
12p. 1962 (1966). CFSTI. He $1., Mf $.50. (NASA-
CR-54627).

N66-22932: Effects of cold rolUng on the notched
and unnotched tensile properties of type 310 stainless
steel at plus 75 degrees F, minus 320 degrees F
and minus 423 degrees F, by J. D. Gruner. 20p. 1962
(1966). CFSTL He $1., Mf $.50. (NASA-CR-54747).
N66-22934: Effects of cold rolling on the mechanic
properties of type 310 stainless steel at room and cryogenic
temperatures by J. L. Christian and L. D. Girton.
31p. 1962 (1966). CFSTI. He $2., Mf $.50.
(NASA-CR-54614).
N66-23712: Application of diffuse x-ray scattering
to the study of the structures of binary alloys. Semiannual
prog. rept. 1 Sept. 1965-28 Feb. 1966, by J. E.
Spruiell. 22p. 1966. CFSTI. He $1., Mf $.50. (NASA-
CR-74171).
N66-23802: Recommended values of the thermophysical
properties of eight alloys, major constituents
and their oxides. Feb. 1, 1965-Jan. 31, 1966, by Y. S.
Touloukian. 574p. 1966. CFSTI. He $8.73, Mf $2.75.
(NASA-CR-71699).
Includes stainless steel.
N66-24243: Aciers pour caissons de reacteurs. Irradiation
d'eprouvettes d'aciers dans E 13 a differentes
temperatures et essais apres irradiation, by M. Cibois,
et al. 57p. 1966. CFSTI. He S3., Mf $.50. (EURAEC-
1502).
Steels for reactor vessels. Irradiation of steel samples an E
13 at various temperatures and testing after irradiation.
N66-24695: Effect of nuclear radiation on material
at cryogenic temperatures. Final rept., by C. A.
Schwanbeck. 303p. 1965. CFSTI. He $7., Mf $1.75.
(NASA-CR-54881).

N66-24897: Neutron diffraction investigation of
some iron-tungsten carbides, by Z. Bojarski and J.
Leciejcwicz. 19p. 1965. CFSTI. He $1., Mf $.50.
N66-25247: Evaluation of special 301-type stainless
steel for improved low temperature notch toughness of
cryoformed pressure vessels, by T. W. Orange. 20p.
1966. CFSTL He $1., Mf $.50. (NASA-TN-D-3445).
N66-26246: Experimental investigation of the reentry
behavior of metals and alloys, by J. M. Bridges
and R. N. Pinchok. 152p. 1964. CFSTL He $5., Mf $1.
(NASA-CR-75093; WANL-TNR-192).
N66-34864: Procedures of externally loading and
corrosion testing stress corrosion specimens, by T. S.
Humphries. 39p. 1966. CFSTI. He $2., Mf $.50.
(NASA-TM-X-53483).
N66-35175: Mechanisms of strengthening and fractures
in composite materials. Prog. rept. no. 4, Dec. 1,
1965-June 1, 1966, by A. S. Teteman. 12p. 1966.
CFSTI. He $1.. Mf $.50. (NASA-CR-77451. Grant
NSG-622).
NLCO-979: Determination of oxygen in magnesium,
steel and titanium: Internal standard techniques in 14-
Mev activation analysis, by Bruce L. Twitty and Kenneth
M. Fritz. 21p. 1966. CFSTI. $1. cy, $50 mn.
NP-15131: Uglovye i energetricheskie rasprcdeleniia-izlucheniia,
by Yu. A. Kazanskii. 20p. 1960.
Angular and energy distribution of emission scattered in
water and iron.
NP-15146: Gamma dose rates from ground and steel
activation following nuclear fission explosions in air,
by A. Bergstroem and M. Lcimdoerfer. 25p. 1964.
Supplementary calculation was made to analyse the gamma
dose rate contributions from a steel slab on the ground.
93

NP-15152: An absolute measurement of thermal
neutron albedo for several materials, by Duane Robert
Doty. 35p. 1965. CFSTL $2. cy.
Values of thermal neutron albedo for iron are included.
NP-15634: Comparison of neutron activation analysis
and vacuum fusion analysis of the oxygen content
of steel, by L. C. Pasztor and D. E. Wood. 36p.
1965.
NP-15926: Dose attenuation variation with incident
gamma-ray energy in two-legged concrete and steel
ducts, by J. M. Chapman. 30p. 1966. CFSTI. $2. cy,
$.50 mn.
NP-15933: Some thermodynamic properties of uranium,
molybdenum, iron and zirconium at high temperatures
and pressures, by P. Mamell, et al. 32p.
1961. (1966).
NP-16234: Differential neutron albedo for thin slabs,
by D. R. Doty. 78p. 1966. CFSTI. $3. cy, $.75 mn.
NRL-Memo-1596: In-reactor fatigue tests of A302-B
steel representing the Elk river reactor pressure vessel.
by J. R. Hawthorne and L. E. Steele. 17p. 1965.
CFSTI. SL cy.
NSJ-tr-37: Steel plate for nuclear power reactors.
by Tatuo Yoshida, et al. 30p. 1964. JCL $2.60.
NYO-2394-22: Continuum theory of plasticity on the
macroscale and the microscale. Tech. rept. no. 22,
by D. C. Drucker. 67p. 1966. CFSTI. $3. cy, $.75 mn.
NYO-3450-1: Marine geochemistry. Proceedings of
Symposium held at the University of Rhode Island,
October 29-30, 1964. Occasional Pub. no. 3. ed. by-
David R. Schink and James T. Corless. 371p. 1965.
CFSTI. $7. cy, $1.75 mn.
94

ORNL-3852: Calculation of the nucleon-meson cascade
in iron initiated by 1- and 3-Gev protous and
comparison with experiment, by R. G. Alsmiller, Jr.
and J. Barish. 15p. 1965. CFSTI. $1. cy, $.50 mn.
ORNL-3949: Radiation Metallurgy Section, Solid
State Div. Prog. Rept. for the period ending Feb. 1966.
49p. 1966. CFSTI. S3, cy, $.50 mn.
ORNL-P-1670: Pulse heating ealorimetric technique
for measuring the speciBc heat of electrical conductors
and its application to pure iron from 100 to 1400
degrees C, by T. G. Kollie. 51p. 1965. CFSTI. $3. cy,
$.50 mn.
ORNL-P-1733: Calculation of the nucleon-meson
cascade in iron initiated by 1 and 3-Gev protons and
comparison with experiment, by R. G. Alsmiller, Jr.
13p. 1965. CFSTI. $1. cy, $.50 mn.
ORNL-RSIC-9: Comparison of three methods used
to calculate gamma-ray transport in iron, by D. K.
Trubey, et al. 57p. 1965. ORNL. Gratis.
ORNL-TM-1121: Nucleon-meson cascade initiated
by 200-Bev protons, by R. G. Alsmiller, Jr. and J.
Barish. 19p. 1965. CFSTI. $1. cy, $.50 mn.
Calculations carried out for the case of 200-Bev protons
in iron.
ORNL-TM-1156: Fast-neutron scattering, from
small cylinders of steel, aluminum, and graphite steel,
by John C. Courtney, 104p. 1965. CFSTI. $4.
Thesis.
ORNL-TM-1187: Development of pulse heating
ealorimetric technique for measuring the specific heat
of electrical conductors and its application to pure
iron from 100 to 1400 degrees C. by Thomas Gilman
Kollie, 259p. 1965. CFSTI. $6. cy, $1.25 mn.
Thesis, U. of Tcnn.
95

ORNL-TM-1312(v. 2): Structural analysis of shipping
casks. Resistance to puncture, by A. E. Spallen.
57p. 1966. CFSTI. $3. cy, $.75 mn.
ORNL-TM-1420: (B-chloxoethyl) ether extraction
of iron(III) from hydrochloric acid solutions and the
effect of an inert diluent on the distribution coefficient,
by J. J. Pinajian. lip. 1966. CFSTI. $1. cy, $.50 mn.
ORNL-TM-1481: Methyl isobutyl ketone (4-methyl
2-pentanone) extraction of trivalent iron from hydrochloric
acid solutions and the effect of an inert diluent
on the distribution coefficient, by J. J. Pinajian. 9p.
1966. CFSTI. $1. cy, S.50 mn.
ORNL-TM-1612: Corrosion of carbon and alloy
steels in water and seawater, by S. A. Reed. 20p.
1966. CFSTI. SL cy, $.50 mn.
ORNL-tr-668: Study of point defects in pure iron
through electrical resistivity, by Colette Minier-Cassayre.
HOp. 1965. JCL Ph $9.10, Mf $3.50.
ORNL-tr-922: Influence of traces of lead and rare
earths on the structure and mechanical characteristics
of stainless steel, by P. Ravizza and W. Nicodemi.
lOp. 1965. JCL. $1.60 Ph, $.80 mf.
ORNL-tr-1060: Computation of the thickness of
steel shielding walls against gamma radiation, by Arnost
Hoenig. lip. 1965. JCL. S1.60 Ph, $.80 Mf.
ORNL-tr-1236: Length measurements on neutronirradiated
pure iron, by Emmanuel Bonjour, et al. 5p.
1966. JCL. $1.10 ft, $.80 mf.
ORNL-tr-1348: Effect of alternate temperature variations
on prestressing steels. Cancellation of relaxation,
by Dumas. 41p. 1965. JCL. $4.60 fs, $1.43 mf.

PG-Report-709: Analytical method for the determination
of iron in high purity plutonium, by G. A. Bell, et
al. lip. 1966. BIS $.50.
PG-Report-729: Analytical method for the absorptiometry
determination of iron in high purity plutonium
metal (bathophenanthroline method). 8p.
1966. BIS S.30, HMSO Is 3d.
PB-16S849 Short-time, high temperature properties
of heat-resisting alloy sheet, by W. F. Simmons, et al.
91p. 1949. (1966). CFSTI. He $3., Mf $.75.
PB-168S67: Air pollution aspects of the iron and
steel industry, by Jean J. Schueneman and W. E. Bye.
128p. 1963. CFSTI. He $4., Mf $1.
PB-169207: Nonlinear programming approach to the
minimum weight elastic design of steel structures, by
D. M. Brown and A. Ang. 123p. 1965. CFSTI. He $4.,
Mf $.75.
PB-169343: Contribution a 1'etude de leffet Szilard-
Chalmers dans le ferrocyenure de potassium, by Brigette
Meriadec. 34p. 1966. CFSTI. He $3.60, Mf $50.
Contribution to the study of the Szilard-Chalmers effect in
potassium ferro-cyanide.
PB-169524: Dosage spectrogiaphique de petites
quantites de bore dans le fer et les aciers a 1'arde dtt
separatens d'ordres, by Danh Tran Van and Jacques
Ernoult. 16p. 1966. CFSTI. Ho $1.60, Mf $.50.
Spectrographic determination of small quantities of boron
in iron and steels by means of order sorter.
PB-169640: Penetration of plane normal and plane
slant gamma-rays through slabs of aluminum and
steel. II. Angular and energy spectra (photon number
flux). Res. & dev. tech. rept., by N. E. Scofield and
L. G. Haggmark. 45p. 1960. (1966). CFSTI. He $.4.60.
97

PB-170709: Effect of tempering on the toughness of
hardened steel, by Juha Pietikainen. 80p. 1966. CFSTI.
He $1.50, Mf $.75.
Doctoral dissertation.
PB-171809: (Rev. Supp. 2): Cryogenic materials
data handbook. Prog. rept. no. 2. 270p. 1965. CFSTI.
He 6$., Mf $1.50 (AD-618065).
RFP-69S: Determination of iron and nickel in uranium
by atomic absorption spectrophotometry, by G. A.
Shepherd and A. J. Johnson. 23p. 1966. CFSTI. $1. cy,
$.50 mn.
RPI-328-49: Linear accelerator project. Progress
rept. Oct.-Dec., 1965. 82p. 1965. CFSTI. $3. cy, $.75
mn.
RTS-2899: On rupture following creep, by Yu. N.
Rabotnov. 20p. 1965. NIX. 27s. 6d (NCH-203 140).
SA-TR-19-1513: Ultrasonic attenuation studies of
die block steels technical report, by R. D. Korytoski
and R. H. Brockeman. Sp. 1964.
SWRI-1226-3-3: Nondestructive testing of plastic
fatigue pressure vessels. Final rept., by Clarence E.
Lautzenheiser and Allen R. Whiting. 112p. 1965.
CFSTI. $4. cy, $1. mn.
SWRM22S-61: Studies of the fatigue strength of
pressure vessels. 1: Cyclic pressure tests of large size
pressure vessels. 2: Low cycle fatigue testing on onehalf
scale model pressure vessels. 3: Effect of weld defects
on the fatigue strength of A302 B steel. Progress
rept. no. 14, by A. G. Pickett, et al. 47p. 1965. CFSTI.
$2. cy.

SWRI-1228-69: Studies of the fatigue strength of
pressure vessels. 1: Cyclic pressure tests of large size
pressure vessels. 2: Low cycle fatigue testing of onehalf
scale model pressure vessels. 3: Effect of weld
defects on the fatigue strength of A302 B steel, by A.
C. Pickett, et al. 21p. 1965. CFSTI. $1. cy, $.50 mn.
SWRI-1228 Pl-28: Studies of the fatigue strength
of pressure vessels. 1: Cyclic pressure tests of large
size pressure vessels. 2: Low cycle fatigue testing on
one-half scale model pressure vessels. 3: Effect of weld
defects on the fatigue strength of A302 B steel. Progress
rept. no. 19, by A. G. Pickett and S. C. Grigory.
76p. 1966. CFSTI. $3. cy, $.75 mn.
TC-1829: Formation of phosphate coatings on iron
and steel, by V. Cupr and J. B. Pelikan. 6p. 1966.
TC $5. (NCH-204 434).
TID-20343: Lattice parameter measurements of undoped
and chromium-doped wustite, by Roger L. Levin
and J. Bruce Wagner, Jr. 14p. 1964. CFSTL He $1.,
Mf $.50.
TID-22970: Research in materials science and engineering.
Annual rept., 1965-1966. 440p. 1966. CFSTI.
$7.40 cy, $2. mn.
TID-23138: Fatigue crack propagation in low-carbon
steels, by D. F. Mowbray. 9p. 1966. CFSTI. $1. cy,
$50 mn.
TRG-Report-840: Steels data manual. Properties on
interest in reactor design, comp. by, B. J. Scddon. 218
p. 1965. BIS $7.
TT-65-31123: Studies in low-alloy pearlitic steels
and highly coercive Fe-Ni-Al base alloys. USSR. 2, a,
20p. 1965. CFSTI. $1. (JPRS-30340).
99

TT-65-31722: Studies in structure of tungsten and
molten iron, cobalt and nickel borides. USSR. 2, a,
lOp. 1965. CFSTI. $1. (JPRS-31225).
TT-65-31771: Results of All-Union public review of
achievements in ferrous metallurgy, by S. M. Rigmant.
6p. 1965. CFSTI. He $L, Mf $.50. (JPRS-31274).
TT-65-32526: Electroslag remelting, USSR, by R. I.
Medovar, et al. 2, a, 66p. 1965. CFSTI. $3. (JPRS-
32032).
TT-65-32563: Handbook of Soviet steels and alloys.
8, l-5a, 6-47a, 4S-57p. CFSTI. $3. (JPRS-32070).
TT-65-32580: Clad stainless steels, USSR, by S. A.
Gladyrevskaya, et al. 2, a, 66p. 1965. CFSTL $3.
(JPRS-32087).
TT-65-32600: Possibility of strengthening steel by
electron bombardment, USSR, by B. D. Grozen, et al.
2p. 51. 1965. CFSTI. $1. (JPRS-32107).
TT-65-33346: Studies in strength and fatigue of
steel, USSR, ed. by S. V. Serensen. 2, a, 49p. 1965.
CFSTI. $3. (JPRS-32768).
TT-66-20620: Schevierigkeiten bei der prufung ion
Sehlaekcncinschlussen in der qualitat von stahl, by
Z. Hejedus. 2 M66, ETC. (DAW/WRZ).
TT-66-30239: USSR industrial development: Soviet
ferrous metallurgy, no. 31S, by V. Kazakov, et al. 20p.
1966. CFSTI, SLA, ETC. He $1., Mf $.50. (JPRS-
33796).
TT-66-30346: USSR industrial development: Soviet
ferrous metallurgy, no. 319, by V. Tcrekhov, et al. 14p.
1966. CFSTI, SLA, ETC. He $1., Mf $.50. (JPRS-
33903).
100

TT-66-34494: Change of mechamcal properties of
certain steels due to action of hydrogen at high temperatures
and pressures, USSR, by L. A. Glikman, et
al. 2, 23p. 1966. CFSTL $1 (JPRS-38067).
UCRL-11580: Apparatus for heat capacity measurements
in the range 0.24 to 20 deg. K; applications to
some transition-metal superconductors and ferromagnetic
superconductors, by Russell Howard Batt. 68p.
1964. CFSTL $3. cy, $.75 mn.
UCRL-11930: Viscosity of liquid metals, by Thomas
W. Chapman. 29p. 1965. CFSTI. $2. cy, $50 mn.
UCRL-12153: Fusion bonding of plasma-sprayed
tungsten coatings to steel, by Richard L. Landingham,
et al. 22p. 1964. CFSTI. $1. cy, $50 mn.
UCRL-14215: Influence of iron on oxygen grainboundary
diffuson in periclase crystals, by D. R.
McKenzie. 25p. 1965. CFSTL $2. cy, $.50 mn.
UCRL-14619: Effect of strain rate and specimen di
mensions on the yield point of mild steel, by Marvin
A. Hamstad. 46p. 1966. CFSTL He $2., Mf $.50.
Master's thesis.
UCRL-14752: Diffusion of Fe in an Fe-Al alloy, by
D. J. F. Lai and R. J. Borg. 5p. 1966. CFSTI. He $1.,
Mf $.50.
UCRL-14942: Investigation of threshold photoneutron
cross sections for iron and bismuth, by C. D. Bowman.
14p. 1966. CFSTI. $1. cy, $.50 mn.
UCRL-16121: Microstructure and properties of martensite
formed from cyclically transformed austenite,
by K. V. Ravi. 59p. 1965. CFSTI. $3. cy, $.75 mn.
Thesis.
101

UCRL-16299: Magnetic and electrical properties of
some metals at high pressures, by David B. Phillips. 5S
p. 1965. CFSTI. S3, cy, $.50 mn.
Thesis,
UCRL-16585: Strain aging of iron alloys, by Raymond
Andrew Busch. 53p. 1966. CFSTI. $3. cy, $.50
mn.
Thesis.
UCRL-16658: Inorganic Materials Research Div.
Annual report, 1965. 183p. 1966. CFSTL $5., SI. mn.
UCRL-16761: Dynamic strain aging of a high
strength steel, by V. Goel, et al. 32p. 1966. CFSTI.
$2. cy, $.50 mn.
UCRL-16770: Dislocation mechanisms in an ironmanganese
alloy at low temperatures, by Paul Pinhas
Wynblatt. 35p. 1966. CFSTI. $2. cy, $.50 mn.
Thesis.
UCRL-16S46: Calculation and measurement of the
yield stress of alloys with coherent lamellar microstructures,
by Shelly Dean Dahlgren. 53p. 1966.
CFSTI. $3. cy, $.50 mn.
Thesis.
UJV-1368: Stanoveni wolframu v zeleze aktivacni
analyzou, by J. Slunecko, et al. 16p. 1966.
Determination of tungsten in iron activation analysis.
UJV-1405/65: Specifikace nekterych oceli pro tlakove
nadoby jadermych reaktoru, by Jiri Cervasek. 27p.
1965.
Specifications of certain steels for nuclear reactor pressure
vessels.
UNC-5139: Neutron cross sections of nitrogen, oxygen,
aluminum, silicon, iron, deuterium and beryllium,
by J. H. Ray, et al. 211p. 1966. CFSTI. $6. cy, $1.25 mn.
102

UNC-5140: Gamma spectral data for shielding and
heating calculations. Summary rept. by J. Celnik and
D. Spielberg. 65p. 1965.
USNRDL-TR-S90: Determination of the total tritium
activity adsorbed on the surface of various metals,
by W. E. Balkwell and D. A. Kubose. 22p. 1965.
Includes structural steel, galvanized steel, etc.
USRL-11861: Structures and strength of ausforrncd
steels, by Om Johari. 117p. 1965. CFSTL $4.
Thesis.
WANL-TME-1153: Effectiveness of vertical shields
in a cluster of three nerva II modules by L. O. Ricks.
44p. 1965. CFSTI. $2. cy, $.50 mn.
Steel and lithium hydride steel were included in the
studies.
WAPD-T-1662: Spark source mass spectrographic
analysis of some nickel and iron base alloys, by H. D.
Cook, et al. 20p. 1964. CFSTI. $1. cy.
WAPD-TM-554: Effect of loading geometry on the
fracture toughness of biaxial brittle fracture specimens,
by James P. Romualdi. 45p. 1964. CFSTI. $2. cy, $.50
mn.
WAPD-TM-582: Removal of iron and boron during
fabrication of ceramic fuel pellets, by H. II. Crain,
Jr. 18p. 1966. CFSTI. $1. cy, S.50 mn.
WERL-8844-3: Plane strain fracture toughness measurements
of three A302 B materials by means of spin
test, by G. O. Sankey and J. H. Bitzer. 13p. 1964.
CFSTI.
WERL-8S44-4: Pt. I: Variations in the embrittlement
of irradiated pressure vessel steels, by E. T.
Wessel and T. W. Eichelberger. 41p. 1965. CFSTI. $2.
cy, $50 mn.
103

WERL-8844-5: Irradiation embrittlement of pressure
vessel steels. Pt. II: Transformations and microstructure,
by T. W. Eiehelberger and E. T. Wessel.
16p. 1965. CFSTI. $1. cy, $.50 mn.
WERMJS44-6: Variation in sensitivity in irradiation
damage, by E. T. Wessel, et al. 23p. 1965. CFSTI.
$6. cy, $1.25 mn.
WERL-8844-11: Investigation of the applicability
of the biaxial brittle fracture test for determining
fracture toughness. Final summary rept., by E. T. Wessel
and W. H. Pryle. 29p. 1965. CFSTI. $2. cy, $.50 mn.
Tests were mode on A302 B steel.
Y-1490: Penetration tests, by W. T. Carey. 17p. 1966.
CFSTI. He $L, Mf $.50.
Y-1542: Determination of aluminum, silicon, iron,
uranium and thorium in beryllium by x-ray fluorescence,
by G. E. Walden and Alma D. Condrey. 20p.
1966. CFSTI. $2. cy, $.50 mn.
Y-1543: Spark source mass spectrographic analysis
of steels and nickel alloys, by J. C. Franklin and E. B.
Griffin. 14p. 1966. CFSTI. $1. cy, $.50 mn.
U. S. AIR FORCE MATERIALS LABORATORY
Technical Report*
No. AFML-TR-65-114: Emerging aerospace materials.
105p. 1965. Author, Wright-Patterson, Air Force
Base, Ohio.
U S. AREA DEVELOPMENT ADMINISTRATION
Pertinent characteristics of the iron and steel industry
as related to area redevelopment, v., 57p. 1964.
1965. $.25.
104

U. S. BUSINESS AND DEFENSE SERVICES ADMINISTRATION
Iron and steel, industrial defense planning manual;
prepared by American Iron and Steel Institute. 36p.
1965. Sup. Doc. $.30.
Iron and steel scrap consumption problems, prepared
by Gardner F. Derrickson. vii. 52p. 1966. $.40.
U. S. CENSUS BUREAU
1963 Census of Transportation
No. Cl-14: Primary iron and steel products (group
14). lip. 1965. $.10.
Current Industrial Reports
Commercial steel forgings, summary for 1965. 3p.
1966. $.15. (Series M33C(65)-13).
Inventories of steel mill shapes, summary for 1965.
3p. 1966. $.15. (Series M33C-(65)-13).
Iron and steel foundries and steel ingot producers.
1964. iii. 17p. $.25.
Steel mill products, 1964. 2, 12p. 1966. $.25. (Series
M33B(64)-1).
Industry Reports
No. 33B: Iron and steel foundries, by Malcolm E.
Bernhardt, vi. 24p. 1965. Sup. Doc. $.25.
Industry Statistics
MC63(2)-series.
No. 33A: Blast furnaces, steel works and rolling and
finishing mills, prepared by Malcolm E. Bernhardt and
Leo Levi. vi. 52p. 1966. Sup. of Doc. $.40.
Preprints Industry Status
No. 10B: Iron ores, prepared by Wilhelmina F.
Whiting and Frank Roy. vi. 25p. 1966. $.25.
105

U. S. COAST AND GEODETIC SURVEY
Publications
No. 62-3: Bilby steel tower for triangulation, by
James K. Richards, x. 99p. 1966. $.70.
U. $ 89rh CONGRESS. HOUSE OF REPRESENTATIVES
House reports on public bills
No. 1609: Steel shipping container identification act.
17p.1966.
U. S. DEFENSE DEPARTMENT
Military Handbook
1C: Military standardization handbook; cross-index
of chemically equivalent specifications and identification
code (ferrous and nonferrous alloys), x, 601p.
1965. Sup. of Doc. $3.25.
U. S. ENGINEER CORPORATION WATERWAYS
EXPERIMENT STATION
Technical Reports
No. 6-518: Investigation of methods of preparing
horizontal construction joints in concrete. Rept. 3: Effects
of iron stain on joints, by J. E. McDonald and
E. F. Smith, iv. 16, 14p. 1966.
U. S. GEOLOGICAL SURVEY
Professional Paper
No. 440-W: Data of geochemistry, ed. 6, Chapter
W-: Chemistry of the iron-rich sedimentary rocks, by
H. L. James. 61p. 1966. $.45.
No. 473-C: Geologic and hydrologic studies in Birmingham
rcd-iron-ore district Ala., by Thomas A.
Simpson, iv. 47p. 1965. Sup. of Doc. $1.75.
106

U. S. BUREAU OF LABOR STATISTICS
Bulletin
No. 1450-81: Employment outlook for structural ornamental
and reinforcing iron workers, elevators, constructors.
2, 14p. 1966. U. S. Sup. of Doc. $.10.
No. 1450-106: Employment outlook in iron and
steel industry. 3, 12p. 1966. Sup. of Doc. $.10.
No. 1463: Industry wage survey; fabricated structural
steel, Oct.-Nov. 1964. iv. 42p. 1965. Sup. of Doc.
$.30.
U. S. BUREAU OF MINES
Preprint from Bulletin 630
Steel, by Robert A. Whitman. 2, 27p. 1965. $.20.
Bulletin
No. 631: Nature of carbides of iron, by L. J. E.
Hofer. v. 60p. 1966. $.40.
Information Circulars
No. 8261: Brown iron ore resources Barbour, Butler,
Crenshaw and Pike Counties, Ala., by James F. O'Ncil.
2, ii, 59p. 1965.
No. 8278: Iron resources of South Dakota, by C. M.
Harrer. 2, ix, 160p. 1966.
No. 8289: Iron and steel scrap in Arkansas, Kansas,
Louisiana, Mississippi, Missouri, Oklahoma, and Texas,
by Frank B. Fulkerson and Harry F. Robertson.
2, ii, 52p. 1966.
Preprints
Iron and steel scrap, by Robert A. Whitman. 2, 24p.
1966. $50.
107

Reports of Investigation
No. 6647: Removing copper from copper-clad steel
by oxidation, by R. J. Leary. 312p. 1965.
No. 6649: Study of clilorination kinetics of germa
ium, silicon, iron, tungsten, etc., by Ame Landsberg
and Frank E. Bloch. 3, 26p. 1965.
No. 6650: Lake Superior iron resources, preliminar
sampling and metallurgical evaluation of central Mesabi
nonmagnetic taconites, by L. F. Heising and D. W.
Frommer. 3, 28p. 1965.
No. 6696: Variables in use of hot-finished mild st
coupons for corrosion inhibitor testing, by Jerry B. F.
Champlin and Don E. Thompson. 3, 17p. 1965.
No. 6699: Adsorption phenomena and reduction of
iron oxides, relation of heat of adsorption to heat of
activation for reduction of wustite and magnetite, by
S. E. Khalafalla, et al. 3, ISp. 1965.
No. 6723: Use of diphenyl ether calorimeter in determining
heat of fusion of iron, by J. P. Morris, et al.
3, 14p. 1966.
No. 6754: Thermodynamic properties of ZnO-FerOi-
FiO( system at elevated temperatures. 1: Thermodynamic
properties as related to spinel structure.
No. 6764: Magnetic roasting of iron ores with ferrous
scrap, by M. M. Fine and Charles Prasky. 3, 23p.
1966.
No. 6775: Reduction roasting-acid solution techniques
in laboratory processing of Minnesota manganiferrous
ores, by P. L. Weston and M. M. Fine. 3, 22p.
1966.
108

No. 6814: Mechanical strength of coke and iron ore
pellets at elevated temperatures, by G. W. Birge, et al.
3, 16p. 1966.
No. 6827: Reaction interface speed as reducibility
index for iron ore, by J. P. Hansen, et al. 2, ii, 33p.
1966.
No. 6832: Adsorption phenomena and reduction of
iron oxides, mechanism of reduction of iron oxides
with carbon monoxide, by S. S. Khalafalla, et al. 3,
22p. 1966.
U. S. NATIONAL AERONAUTICS AND SPACE
ADMINISTRATION
Contractor Series
No. 302: Plane strain fracture touglmess of 18 Ni
(250) and 18 Ni (209) maraging welded steel plate,
by H. E. Romine. v, 47p. 1965. CFSTI. $3.
No. 334: Investigations of electron interactions with
matter: Pt. 1: Bremsstrahlung production in aluminum
and iron, by William E. Dance and Leo L. Baggerly.
90p. 1965. CFSTL $3.
NASA-CR-54356: Development and evaluation of
magnetic and electrical materials capable of operating
in the 800 degree to 1600 degree F. temperature range.
Third qtly. rept. June 1-Aug. 31, 1965, by P. E. Kueser,
et al. 175p. 1965.
NASA-SP-71; p. 449-453: Bremsstrahlung production
in thick aluminum and iron targets by 05 to 3.0mev.
electrons, by L. L. Baggerly, et al. 518p. 1965.
GPO $3.25.
Second symposium on protection against radiation in space,
1964.
109

Tech Briefs
No. 66-10097: Computer program simplifies selection
of structural steel columns, lp. 1966. (NU-0044).
No. 66-10110: Etching process mills PH 14-8 Mo
alloy steel to precise tolerances, lp. 1966. $.15.
No. 66-10262: Aluminum steel wire composite plates
exhibit high tensile strength. 2p. 1966. $.15.
Tech Notes
No. D-2989: Effect of variations in silicon and iron
content on embrittlement of a cobalt-base alloy (L-
605), by Gary D. Sandrock, et al. 24p. 1965. CFSTI.
$1. cy, $.50 mn.
No. D-3151: Fatigue-crack propagation and residual
static strength of PH 15-7 Mo (TH-1050) stainless
steel, by C. Michael Hudson. 1, 31p. 1965. CFSTI. $2.
No. D-3420: Photographic observations of low-density
iron artificial meteroid, by Gale A. Harvey. 1,16p.
1966. $1.
No. D-3426: Accelerated cavitation damage of steels
and superalloys in liquid metals, by Stanley G. Young
and James R. Johnston. 1, 24p. 1966. CFSTI. $2.
No. D-3468: Dimple spall, and perforation characteristics
in aluminum, columbium, and steel plates
under hyperveloeity impact, by Nestor Clough, et al.
1, 19p. 1966. $1.
No. D-3575: Kinetics of fluorination of iron, by Patricia
M. O'Donnell. 1. 12p. 1966. CFSTI. $1.
U. S. NATIONAL BUREAU OF STANDARDS
Commercial Standards
No. CS1S8-66: Cast iron soil pipe and fittings. 1966.
$.40.
110

Miscellaneous Publications
No. 260-3: Standard reference materials: Metallographic
characterization of NBS spectrometric lowalloy
steel standard, by R. E. Michaelis, et al. vi, 17p.
No. 260-6: Methods for the chemical analysis of
white cast iron standards, by J. I. Shultz. 62p. 1965.
$.45.
No. 260-10: Standard reference materials: Homogeneity
characterization of NBS spectrometric standards.
2: Cartridge brass and low-alloy steel, by H.
Yakowitz, et al. vi, 2Sp. 1965. Sup. of Doc. $.20.
No. 260-14: Standard reference materials: Determination
of oxygen in ferrous materials SRM 1090,
1091, and 1092, by Oscar Menis and J. T. Sterling.
vii. 28, lp. 1966. $.30.
U. S. NAVAL PERSONNEL BUREAU
Steelworker ISC. v, 304p. rev. 1966.
U. S. NAVAL RESEARCH LABORATORY
Reports
No. 6259: V-FerO» and passivity of iron, by M. C.
Bloom and L. Goldenberg. i, 10, 4p. 1965.
No. 6317: Conditions of failure in fatigue cracked
4340 steel, by E. P. Klier. ii, 14, 4p. 1965. CFSTI. $1.
U. S. SALINE WATER RESEARCH AND DEVELOPMENT
Progress Reports
No. 166: Corrosion in carbon steel heat transfer surfaces,
by E. P. Shea and W. R. Hollingshead. v, 130p.
1965. Sup. of Doc. $.65.
ill

U. S. SHIPS STRUCTURE COMMITTEE
SSC Series
No. 169: Interpretative report on weldmetal toughness,
by K. Masubuchi, et al. 78p. 1965.
No. 170: Study of some brittle fracture concepts, by
R. N. Wright, et al. 3, 86, 12p. 1965.
No. 171: Micro- and macrocrack formation by B. L.
Averbach. 32p. 1965.
No. 174: Investigation of residual stresses in steel
weldments, by Koichi Masubuchi and D. C. Martin.
4, 103, 2p. 1966.
No. 175: Mechanical properties of high manganese
low-carbon steel for welded heavy-section ship plate,
by R. D. Stout and C. R. Roper, Jr. 4, 20, 2p. 1966.
U. S. TARIFF COMMISSION
Publication
No. 186: Steel jacks from Canada, determination of
likelihood of injury in investigation no. AA1921-49
under Antidumping Act 1921, as amended 81. 1966.
MISCELLANEOUS TRANSLATIONS
BISI-3S55: High temperature decomposition of Alnico
(magnico) alloys, by Ya. M. Dovgalevskii and
E. G. Povolotskii. 1966. BISI £5. (NCH-204573).
BISI-4416: Solidification equilibria in the iron-rich
corner of the quaternary system iron-carbon-manganese-oxygen,
by E. Schurmann. 1966. BISI £-7. 10s.
(NCH-204 574).
BISI-4455: Application of statistical quality control
to iron and steel products, by W. Jaeniehe. 1965.
BISI £6. 10s. (NCH-203 238).
112

BISI-4460: Analysis of returns as a new tool of cost
accounting in the iron and steel industry, by G. Vogelsang.
1966. BISI £4. (NCH-204 576).
BISI-4576: Influence of water vapor and carbon dioxide
on oxidation of iron and iron-base alloys at elevated
temperatures, by A. Rahmel. 1966. BISI £6.
(NCH-204 450).
BISI-4593: Factors affecting the speed at which inclusions
in steel emerge, by S. I. Popel and A. A.
Derybin. 1966. BISI £4 10s. (NCH-204 397).
BISI-4597: Control of the oxygen content in steel at
different production stages in low-capacity melting
furnaces with basic linings, by P. Dctrez. 1966. BISI
£5.
BISI-4599: Analogue computers in the steel industry,
by L. Noronha. 1965. BISI £2 10s. (NCH-203
247).
BISI-4604: Historical development of the industrial
furnace and its place in the steel industry, by C. God.
BISI £12. (NCH-204 452).
BISI-4610: Vacuum treatment of steel used in the
production of high-strength rails, by Z. Motloch and
S. Horejs. 1966. BISI £6. (NCH-204 4.54).
BISI-4618: Electron-microscope observations of
magnetic domains in aged iron-nitrogen alloys, by W.
Pitsch. 1966. BISI £5 10s. (NCH-204 463).
BISI-4634: Slag practice in oxygen top blowing processes
for high-phosphorus pig iron, by J. Schoop and
K. K. Aschendorff. 1966. BISI £7. (NCH-204 464).
BISI-4635: Examination of macroscopic oxides in
killed steels, by J. Bruch. 1966. BISI £7 10s. (NCH-
204 577).
113

BISI-463S: Planning an iron ore transhipment and
pellctising plant as a European steelworks community
project, by P. Puhlmann. 1966. BISI £13. (NCH-204
465).
BISI-4671: Determination of redueibility of iron
ores using programmed blast furnace conditions, by H.
Schenck. 1966. BISI £5 10s. (NCH-204 467).
BISI-4702: Use of liquified gas in the iron and
steel industry. I: Conversion of an integrated steelworks
to the use of liquified gas, by R. Nikolie. 1966.
BISI £5 10s. (NCH-204 456).
BISI-4747: On the existance of a plastic deformation
in iron in the course of the alpha-gamma transformation,
by P. Lehr. 1966. BISI £1 10s. (NCH-204 593).
BISI-474S: On the dilatometric behavior of pure
iron, by P. Lehr. 1966. BISI £2. (NCH-204 594).
BISI-4779: Determination of traces of aluminum in
steel, by J. B. Nievas and M. H. Lancina. 1966. BISI
£4. (NCH-204 583).
IIB-5152: Electron beam treatment as a method
of work hardening steel surfaces, by G. T. Mazarenko
and C. Ya. Zafavura. 1966. HB $3. (NCH-204 221).
HB-6476: Effect of hard chromium plating on the
fatigue strength of (high and low) alloy steels and
gray cast iron, by H. Wiegand and H. R. Kaiser. 1966.
HB $14.50. (NCH-204 243).
IIIJ-651S: Direct electrochemical determination of
the oxygen concentration in liquid iron. Pt. 2: Effect of
phosphorus, sulfur, and carbon upon the activity of
the oxygen dissolved in liquid iron, bv W. A. Fischer
and W. Adkermann. 1966. HB $6.50. (NCH-204 20S).
114

HB-6624: Characteristics of the charging and heating
periods during intensive oxygen lancing of the
open hearth bath by L. M. Efimov. 1966. HB $4.90.
(NCH-204 203).
HB-6688: Titanium carbide coatings on steel, by
G. A. Semenova. 1966. HB $2.50. (NCH-204 206).
HB-6694: Behavior of dislocation in the (steel)
matrix around small nonmetallic inclusions. Pt. 4:
Deformation of nonmetallic inclusion in steel during
rolling, by L. Hchiyama and M. Sumita. 1966. HB
$6.30. (NCH-204 216).
HB-6695: Preliminary experiments on rate of solidification
and the fonnation of sulfide inclusions in resulfurized
steels. Pt. 1: Of investigation into the structure
of steel ingots, by H. Hirai. 1966. HB $6.30.
(NCH-204 215).
HB-6721: Properties of alloy steels produced in a
basic oxygen (LD) furnace. Pt. 3: Production of alloy
steels in a basic oxygen furnace, by K. Kawakami and
H. Nozaki. 1966. HB $5.60. (NCH-204 235).
HB-6723: Elimination of nitrogen from low-carbon
steel sheet by an aluminum diffusion treatment, by
T. Ando and E. Shuto. 1966. HB $7.50. (NCH-204
232).
HB-6734: Production of high-grade killed steels in
the basic oxygen LD furnace. Pt. 4 of Production of
alloy steels in the basic oxygen furnace, by Y. Mishio,
et al. 1966. HB $4.50. (NCH-204 245).
HB-6756: Nondestructive methods for the detection
of delta ferrite in austenitic steels, by K. Spiegelberg
and E. Haupt. 1966. HB $9.80. (NCH-204 218).
115

HB-6764: On the rate of deoxidation (of steel) by
silicon, Pt. 2: of kinetic researches on deoxidation of
steel, by T. Kawawa. 1966. HB $6.80. (NCH-204 232).
HB-6788: Determination of aluminum and its states
of combination in plain carbon steels by A. Neuberger.
1966. IIB $12.80 (NCH-204 230).
HB-679S: On electrolytic methods of extracting carbides
and intermetallic compounds from steels and
alloys, by M. P. Braum and M. E. Natanson. 1966.
HB'$3.S0 (NCH-204 246).
HB-6S01: On the possibility of improving the corrosion
fatigue strength of hardened steel, by I. V.
Karpenko. 1966. HB $3. (NCH-204 222).
HB-6S14: Improved final deoxidation of 16-25-6 Cr
Ni Mo and AISI 4340 type steels, by V. S. Vvedenskii.
1966. HB $6.80. (NCH-204 237).
HB-6819: Effect of inoculants on the viscosity of liquid
steels, by N. S. Kreshchanovskii and M. F. Sidorenko.
1966. HB $3.90. (NCH-204 236).
11G

REVIEW O F IRON A N D STEEL
LITERATURE FOR 1967
A CLASSIFIED LIST OF THE MORE
IMPORTANT BOOKS, SERIALS AND
TRADE PUBLICATIONS ISSUED DUR­
ING THE YEAR; WITH A FEW OF
EARLIER DATE NOT PREVIOUSLY
ANNOUNCED
By MARJORIE McCLELLAND
Science and Technology Department,
Carnegie Library o< Pittsburgh
Reprinted from
'Blast Furnace and Steel Plane'
August 1968-January 1969
Carnegie Library of Pittsburgh
1969

CARNEGIE LIBRARY
OF PITTSBURGH
A free public library donated by
Andrew Carnegie and maintained by
the City of Pittsburgh.
A supplemental appropriation by the
County of Allegheny provides for free
service to County residents.

Review of Iron and Steel Literature for 1967
THIS BIBLIOGRAPHY, the fifty-6rst annual Review
of Iron and Steel Literature compiled for
Blast Furnace and Steel Plant, attempts to list
books, technical reports, and pamphlets published during
1967, with some of earlier date not included in
previous issues.
When possible, the compiler has examined the
publications listed. In some cases they were not accessible,
and the only information regarding them was
in technical journals and publishers' announcements;
unfortunately this information is not always accurate
or complete for bibliographic purposes. Prices are
difficult to verify and may vary from one source to
another so that those listed may be inaccurate in some
eases.
The Science and Technology Department, Carnegie
Library of Pittsburgh, receives the non-secret, research
and development reports issued by the Atomic
Energy Commission (AEC), the National Aeronautics
and Space Administration (NASA), and many
other publications from various government agencies.
Complete translations and abstracts of articles appearing
in numerous foreign language journals are received
in the department.
Designated as a partial depository for atomic energy
reports from Canada, Great Britain, and Denmark, it
also receives publications from Germany, Israel, Italy,
Japan, the Netherlands, Spain, Sweden, and Switzerland.
This list is concerned only with separately published
books, reports, and pamphlets. It is highly selective
and makes no attempt to be all inclusive.

Much of the important literature relating to the
metallurgy and technology of iron and steel, including
raw materials, properties, processing, production, and
applications, appears in current periodicals and journals
which may be approached through guides such
as: Applied Science and Technology Index, British
Technology Index, Chemical Abstracts, Engineering
Index, International Aerospace Abstracts, Journal of
the Iron and Steel Institute, Metals Abstracts, and
other abstracting and indexing services.
Comprehensive indexes of United States government
publications currently available for reference
are the Monthly Catalog of U. S. Government Publications,
Scientific and Technical Aerospace Reports,
Nuclear Science Abstracts, U. S. Government Research
and Development Reports, and the U. S. Government
Research and Development Reports Index.
The Department provides photocopies, accessibility
to reports and journals, and reference assistance in
locating material. Comprehensive lists of books and
journal articles may be found and literature searches
conducted by means of the abstracts, indexes and bibliographies
available in the Department.
The compilation of this bibliography was undertaken
as a project by the Science and Technology
Department.
Daniel R. Pfoutz. Head
Science and Technology Department
Camegie Library of Pittsburgh

Contents
Kty lo Availability Designations for
Government Publications 6
Iron and Steel Industry 7
General Metallurgy 13
Ores; Ore Preparation 29
Extraction and Refining 31
Foundry 36
Mechanical Working 39
Powder Processing 46
Heat Treating 47
Joining SO
Cleaning, Coaling and Finishing 56
Metallography 60
Transformations and Resulting Structures 64
Physical and Mechanical Properties 67
Atomic and Nuclear Physics 87
Corrosion 94
Inspection and Control 105
Products and Parts 115
Design and Construction 119

Key To Availability Designations For Government
Publications
AECL
For sale by Atomic Energy of Canada, Ltd., Chalk
River, Ontario.
CFSTI
For sale by the Clearinghouse for Federal Scientific
and Technical Information, U. S. Dept, of Commerce,
Springfield, Va. 22151. All Documents sold by CFSTI,
except u few NASA publications, are priced at S3.00
for • printed copy or $0.65 for a micronegative (microfiche).
Prices for publications available from
CFSTI are not included in the entries unless they
differ from the standard price.
Dep.
Available at U. S. Atomic Energy Commission depository
libraries. A list of these may be found in issues
of ."«'(.•. v.i Science Abstracts.
DTTE
Available from the U. S. Atomic Energy Commission,
Div. of Technical Information Extension, P. O. Box
62, Oak Ridge, Tenn. 37830.
Gmehn
Available at a nominal charge from Atomic Energy
Documentation Center, Gmelin Institute, 40-42 Varrentroppstrasse,
Frankfurt (Main), West Germany.
Order by AED-number,
GPO
For sale by the Superintendent of Documents, Government
Printing Office, Washington, D. C. 20402.
HMSO
Available from Her Majesty's Stationery Office, London.
JCL
For sale by the Special Libraries Association Translation
Center, John Crerar Library, 35 West 33rd St.,
Chicago, 111. 60616. Prices are stated where known for
facsimile copies (facsim.) and/or for microfiche (mf.)
reproductions.
•
Items having technical report numbers, such as AD
from numbers the or issuing N numbers, agency.
but which are available only

IRON AND STEEL INDUSTRY
Adressbucht der Giesserei-Industrie in der Bundesrepublik
Deutschland, 1967. (1967). Giesserei-Verlag,
Dusseldorf.
Directory of the German foundry industry.
Akademischen Verein Hiitte. Taschenbuch der Werkstoffkunde
(Stoffhutte). xxiii, 1292p. 1967. Emst, Berlin.
160 DM.
Pockelbook of raw material information (metallurgical
materials).
American Iron and Steel Institute. Annual statistical
report, 1966. 112p. 1967. The Institute, New York.
. Charting steels progress during 1966. 63p.
1967. The Institute, New York.
American Metal Market Co. Metal statistics, 1967.
432p. 1967. The Company. S5.
Boas, E. La industria siderurgica en America Latina;
SU origen y su evolution. 137p. 1966. Hemisphere
Holding Co., Panama City.
Iron and steel industry in Latin America; its origin and
evolution.
British Iron and Steel Federation. Statistical liand
book, 1965. 2v. 1967. The Federation, London. 63/-
Brummet, Richard Lee, and H. E. Arnett. Business and
economic evaluation of the metal finishing industry
79p. 1967. University of Michigan. Bureau of Bus
iness Research. (Michigan business report no. 52)
$4.
Canadian mities handbook. 428p. 1967. Northern Min
er Press, Toronto. $6.
Cole, William Earle. Steel and economic growth in
Mexico. 173p. 1967. University of Texas Press, Aus-

tin, Tex. (Texas University Institute of Latin American
studies. Latin American monograph no. 7). S6.
Directory of iron and steel plants, 1967. 479p. 19
Steel Publications, Pittsburgh, Pa. $17.
European Coal and Steel Community. High Authority.
Investment in the community coalmining and iron
and steel industries; report. 3, 92p. Aug. 1967. The
author, Luxembourg. HMSO. 22/-.
1967 survey; position as at January 1, 1967.
Foundry directory and register of forges. Ed. 4. 500p.
1967. Standard Catalogue, London. 50s.
Gale, Walter Keith Vernon. British iron and steel
dustry: a technical history. 198p. 1967. David and
Charles, Newton Abbot (Devon). 35/-.
Granick, David. Soviet metal-fabricating and econo
development; practice versus policy. 367p. 1967.
University of Wisconsin Press, Madison, Wis. $8.50.
Great Britain. Statutes (Individual titles). Iron
Steel Act. 1967. Eliz. 2. 1967. Ch. 17, iii, 108p. Apr.
1967 HMSO. 8/-.
Holm, Bruno, ed. Funfzig Jahre Deutscher Normenausschuss.
1917-1967. 117p. 1967. Beuth-Vertrag,
Berlin. 48 DM.
Fifty years of the German Standards Association.
Industrial European guide, v.l. Steel, engineering,
nucleonics. Ed. 5. lOOOp. 1967. Publication Inter-
Europe II. E. Jaeger, Darmstadt. 58 DM.
Institut fur Weltwirtschaft an der Universitat Kei
Stahlwirtschaftliche Landerberichte.
No. 9, Polen. viii, 116p. 1962. The Institute, Kiel.
14 DM.

No. 10. lugoslawien. xi, 125p. 1963. 16 DM.
No. 11, Spanien. x, 176p. 1965. 22 DM.
Steel economy by country.
Iron and Steel Institute. Ironmaking tomorrow; proceedings
of the conference on ironmaking tomorrow
held at the Autumn General Meeting of the Iron
and Steel Institute on 22 and 23 November 1966,
London. 158p. (Apr.) 1967). The Institute, London.
(Publication no. 102). £5. (Members 80/-).
Ironmonger diary and hardware buyers guide, 1967;
incorporating the hardwareman yearbook. 1966.
Morgan, London. 30s.
Johnson, William Arthur. Steel industry of India.
1966. Harvard University Press. Cambridge, Mass.
$7.50.
Kawata, Sukeyuki, ed. Japans iron d- steel industr
1966 ed. 305p. 1966. Tokyo Foreign Service, Tokyo.
$6.
Le Bailly, William. What happens to free steel? 1
1967. Aims of Industry, London. 3/-.
Liith, A. K., and others. Planning of iron and ste
works. Ed. 3, rev. 208p. (1967). Springer-Verlag.
New York. ca. $12.
MeGarrity, W. F. Steel grows with the transportat
industry. 6p. 1966. American Society for Metals,
Metals Park, Ohio. (Report no. C6-14.2).
Middle East steel, 1967-69. 1967. Industrial Expor
Surveys, London. £ 10.10s.
Mining Journal, Ltd. Annual mining review, 1967.
(1967). The author, London. $4.25.

Mining yearbook, 1967. 80p. 1967. Skinner, London.
$10.50.
Mouzon, Olin T. Resources ami industries of the
United States. 486p. 1966. Appleton, N. Y. $7.95.
Musgrave, P. W. Technical change, the labor force
and education: a study of the British and German
iron and steel irulustries 1860-1964. 286p. 1967. Pergamon,
Long Island City, N. Y. $10.
Organization for Economic Co-operation and Development.
Iron and Steel Special Committee. Iron and
steel industry in 1965 and trends for 1966. 131p.
1966. The author, Paris. 12 Fr. fr.
Osbome, Alice Katherine. Encyclopedia of the iron
and steel industry. Ed. 2. Ixiii, 558p. 1967. Technical
Press, London. 84/-.
Quins metal handbook, 1965. 640p. (1966?). Metal
Bulletin, London. $7.
Ruist, E. Utvecklingstendenser for svensk stal-ind
142p. 1966. Almquish and Wiksell, Stockholm.
30Kr.
Trends in the future development of the Swedish steel
industry. English summaries.
Sehenck, H., and H. Ktippersbusch. Baukosten und
Leistungsfahigkeit von Hochofenanlagen. 50p. 1966.
Verlag Stahleisen, Dusseldorf. 8.40 DM.
Cost of construction and performance of blast furnace
plants.
Swank, James Moore. History of the manufacture of
iron in all ages and partictdarly in the United States
from colonial times to 1891 .. .xix, 554p. (1966?).
Burt Franklin, New York. (American classics of his-
10

tory and social science, series 6).
Originally published in Philadelphia, 1892.
United Nations. Economic Commission for Europe.
Aspects of competition between steel and otlxer materials.
Aluminum, plastics, timber, glass, asbestos,
cement, paper and paperboard, particle board, fibreboard.
121p. 1966. The author, New York. $2.
. European steel market in 1965. 1967. The
author. New York. $1.50.
International comparisons of labour productivity
in the iron and steel industry. The author,
New York. $0.50.
Williamson, J. M., and B. G. Turner. Operational research
study of ironmaking operations: introduction,
objectives and methods of approach. 1967. British
Iron and Steel Research Association, London. (OR/
2/67).
Wirtschaftsvereinigung Eisen- und Stahlindustrie.
Statistisches Jahrbuch der Eisen- und Stahlindustrie
fur 1966. 325p. 1967. Verlag Stahleisen, Dusseldorf.
20 DM.
Statistical yearbook of the iron and steel industry for
1966.
Government Publications
Canadian iron ore industry, 1965, by C. J. Cauvin and
V. B. Schneider. 149p. (1966?). Mineral Resources
Division. Department of Energy, Mines and Resources,
Ottawa. (MR-85). $1.
Current industrial reports: Inventories of steel mill
shapes, summary for 1966. 3p. July 1967. U. S. Census
Bureau, Suitland, Md. $0.15.
. Iron and steel foundries and ingot producers,
1965. I9p. 1966. (Series M33A (65)-l). $0.15.
n

-. Steel mill products, 1965. 2, 12p. June 1967.
$0.15.
Indexes of output per man hour: steel industry, 19
1965. 29p. 1966. U. S. Bureau of Labor Statistics,
Washington, D. C. (BLS report no. 306).
Iron and steel, by Robert A. Whitman. 25p. 1966. U
Bureau of Mines. (Minerals yearbook preprint).
GPO. $0.15.
Iron and Steel: annual statistics for the United K
dom, vii. 164p. 1967. Iron and Steel Board, London.
15/-.
Iron and steel scrap in the intermountain and northwestern
plains states, by Harold J. Bennett. 71p.
1967. U. S. Bureau of Mines, Washington, D. C.
(Information circular 8344). GPO. $0.45.
Iron oxide pigments, by F. E. Brantley. 7p. 1966 U
Bureau of Mines. (Minerals yearbook preprint).
GPO. $0.05.
Metallurgical works in Canada: primary iron and
steel, January 1966. 48p. (1966?). Mineral Resources
Division, Department of Energy, Mines and Resources,
Ottawa. (Operators list 1, part 1). $0.50.
Minerals yearbook, 1965. v.l. Metals and minerals
(except fuels), viii, 1095p. 1966. U. S. Bureau of
Mines. GPO. $4.25.
. v.3. Area reports: domestic, viii, 928p. 1967.
GPO. $3.75.
Mining yearbook, 1965. 544p. (1967). Department of
Energy, Mines and Resources. Mineral Resources
Division and Mines Branch. Ottawa. Queen's Printer,
Ottawa. $5.
12

Review of mineral industries (metal and nonmetals
except fuels), by Edward E. Johnson and Phillip N.
Yasnowsky. 35p. (1967). U. S. Bureau of Mines.
(Minerals yearbook, 1965. Preprint). GPO. $0.15.
Statistical summary of the mineral industry, 1960-1965.
415p. 1966. Institute of Geological Sciences. HMSO.
£1.7s. 6d.
Survey of ironfounding capacity, 1967, iv, 21p. 1967.
Iron and Steel Board. HMSO. 2/3.
Technologic trends in mineral industries (metals
nonmetals except fuels), by F. L. Wideman. 37p.
1966. U. S. Bureau of Mines. (Minerals yearbook,
1965. Preprint). GPO. $0.15.
Water requirements of the iron and steel industry
B. Walling Faulkner and Louis E. Otts, Jr. 58p.
1967. U. S. Geological Survey. (Water-supply paper
no. 1330-H). GPO. $0.65.
Welding equipment and materials in the United Kingdom.
74p. Aug. 1966. Barclay (B. H.), Product Sales
Analysis Ltd., London. CFSTI: PB-174 552.
Foreign market survey, prepared in cooperation with Business
and Defense Services Administration, Washington,
D.C
GENERAL METALLURGY
Alexander, W. O., ed. Metallurgical achievements, ix,
330p. 1965. Pergamon, New York. $12.75.
American Iron and Steel Institute. Regional technical
meetings, 1966. 301p. 1967. The Institute, New York.
Association of Iron and Steel Engineers. Yearly pr
ceedings, 1966. 976p. (1967). The Association, Pittsburgh,
Pa.
13

Baikov, A. A., and M. V. Pridantsev. St>oisft>a i primenenie
zharoprochnukh splavov. 300p. 1966. Nauka,
Moscow. 1R.85K.
Properties and use of high-temperature alloys.
Bannykh, O. A., and others. Khortnomargantsovistye
teploustoichivye stali s alyuminiem. 103p. 1965. Izdatel'stvo
Nauka, Moscow. 43K.
Chrome-manganese heat-resistant steels with aluminium
Beratungsstelle fiir Stahlverwcndung in Zusammenarbeit
and Verein Deutscher Eisenhuttenleute. Eisen
und Stahl; Kurze Einfuhrung in die Grundbegrifie
der Eisen- und StaJderzeugung. Ed. 5. 30p. 1967.
Verlag Stahleisen i. Komm., Dusseldorf. 1 DM.
Iron and steel; a brief introduction to the fundamentals of
iron and steelmaking.
Braun, M. P. Kompleksnolegirovannye konstruktsionnye
stali. 292p. 1965. Akademiya Nauk Ukrainskoi
SSR Institut Problem Lit'ya, Kiev. 1R.12K.
Complex-alloyed structure steels.
British Iron and Steel Research Association. Annual
report for the year ending December 31, 1965. 179p.
1966. The Association, London.
-. Summary of the proceedings of the sixteenth
chemists conference held at Scarborough, May 29-
30, 1963. 79p. (1963). The Association, London.
(MG/Conf. Proc./342/63).
Buchter, H. Hugo. Apparate und Armaturen der
chemischen Hoclidrucktechnik. Konstruktion, Berechnung
und HerseUung. xxiii, 672p. 1967. Springer-Verlag,
New York. 98 DM.
Apparatus and accessories for chemical high pressure techniques.
Design, cost, and manufacture.
14

Clason, W. E., comp. Dictionary of metallurgy. 634p.
1967. American Elsevier, New York. $25.
Multilingual dictionary covering English, French, Spanish,
Italian, Dutch and German.
Congreso Latinoamericano de Siderurgia (6th), Bogota
(Colombia), September 26-30, 1966. Memoria technics.
44p. 1967. Instituto Latinoamericano del Fierro
y el Acero, Santiago.
Proceedings of the 6th congress on ferrous metallurgy.
Cottrell, A. H. Introduction to metallurgy, x, 548p.
1967. St. Martins, New York. $12.
Das, R. K. Industrial cliemistry. Pt. 1 Metallurgy.
148p. 1966, Asia Publishing House, London.
Intended for technical students.
Delrancq, Ch., and others. Influence de la surcliauffe
et la teneur en oxygene sur la germination du graphite
dans la fonte grise. Correlation: surchauffe,
effet d'inoculation. 96p. 1967. Centre de Rcchcrches
Scientifiques et Techniques de l'lndustrie des Fabrications
Metalliques, Brussels.
Influence of overheating and oxygen content on nucleation
of graphite in gray cast iron. Correlation: overheating, effect
of inoculation.
Dempsey, Michael, and Clare Dover. Metallic skills.
Foundations of metallurgy. 127p. 1966. Ginn, Boston.
(Foundations of Science Library). $5.25.
Dennis, William Herbert. Foundations of iron and
steel metallurgy. 246p. 1966. American Elsevier,
New York. $7.50.
Donovan, B. Elementary theory of metals. 261p. 1967.
Pergamon, Long Island City, N. Y. (International
encyclopedia of physical chemistry and chemical
physics — topic II. The ideal crystalline state, v. 2).
$13.50.
IS

Drewes, Emst-Jiirgen. Untersuchungen uber den Einfluss
der Kieselsaure und des Oxydationsgrades auf
die Phasengrenzen, insbesondre der Mischungslucke,
im System CaO-PiOs-FeO-FetOi-SiOi bet
1600"C. 20p. 1965. Technisehe Hochschule, Aachen.
Dissertation. Research on the effect of silica and the degrees
of oxidation on the phase interfaces, in particular the
miscibility gap in the system CaO-PjOj-FeO-FejOrSiOj at
16001 C .
Emel'ianov, Vasilli Semenovich, and A. I. Evstiukhin.
High purity metals and alloys:fabrication, properties
and testing. 175p. 1967. Plenum, New York. $22.50.
Espe, Werner. Materials of high vacuum technology.
V. 1. Metals and metalloids. 912p. 1966. Pergamon,
Long Island City, N. Y. $45.
European Coal and Steel Community. High Authority.
Steel congress 1965 — progress in steel processing,
Luxembourg, October 26-29, 1965. 715p. 1966. The
Authority, Luxembourg. £5 8s.
Experimental methods of materials research V. 1. Advances
in materials research, by Herbert Herman,
ed. 316p. 1967. Wiley, New York. $14.95.
Topics include x-ray and neutron diffraction, electron and
field emission microscopy, electron probe microanalysis, anelastic
techniques as applied to iron, low temperature deformation
techniques, etc.
Fabian, K. Der Einfluss unterschiedlicher Niobgehalte
bei Halbberuhigten und beruhigten Stalden des
Streckgrenzebereiches von 36 bis 46 Kglmm1 auf die
Technologischen Eigenscliatten die Schweissbarkeit
bei Grobblechen. 157p. 1966. Bergakademie, Clausthal.
Dissertation. The effect of various niobium contents in semi-killed
and killed steels in the yield point range 36-46
Kglmm1 on the technological properties, deformability and
weldability of plate.
16

Fischer, Wilhelm Anton, and Michael Haussmann.
Elektrochemische Messungen an Eisen-Sauerstoff-
Schmelzen. 57p. 1967. Westdeutscher Verlang, Cologne.
(Forschungsberichte des Landes Nordrhein-
Westfalen, Nr. 1804). 37.40 DM.
Electrochemical measurements of iron-oxygen-smelts.
Gesellschaft Deutscher Metallhutten- und Bergleute.
Analyse der Metalle, Scheidsanalysen, V. 1. Ed. 3.
xii, 507p. 1966. Springer Verlag, Berlin. 57 DM.
Analysis of metals, separation methods.
Gohlke, Reiner. Untersuchungen zur Phosphoraktivitat
in flussigen Eisen-Phosphor und Eisen-Phosphor-
Kohlenstoff-Legierungen, 73p. 1965. Technische
Hochschule, Aachen.
Dissertation. Investigations on the phosphorus activity in
liquid iron-phosphorus and iron-phosphorus-carbon alloys.
Groenveld, T. P., and others. 9Ni-4Co steels. 14p. Oct.
1966. Battelle Memorial Institute, Columbus, Ohio.
(DMIC memo no. 220).
Haus der Technik. Feuerfeste Stoffe in Ofenbau und
Huttenwesen. Tagung vom 24 Januar 1966 im Haus
der Technik, Essen. 78p. 1966. Vulkan-Verlag, Essen.
(Vortragsveroffentlichungen. Haus der Technik,
H.77). 18.60 DM.
Refractory materials in oven construction and metallurgical
engineering.
Hoselitz, K., and others. Review of metal physics.
109p. 1966. American Elsevier, New York. $7.50.
Illinois University. Library. Racheff metallurgical
studies; index to collections in tlie University of Illinois
library. 214p. 1965. The University, Urbana,
111.
17

Institution of Metallurgists. Refresher Course 1966.
Modern theory in the design of alloys: lectures delivered
at the Institution of Metallurgists Refresher
Course, April 1966. 107p. Aug. 1967. Iliffe, London.
32/6.
International Nickel Company. Carburized nickel alloy
steels. 41p. (1967). The Company, New York.
. Nickel alloy steels for heavy forgings. 26p.
1967. The Company, N. Y.
Quenclied and tempered nickel alloy steels.
59p. n.d. The Company, N. Y.
Iron and Steel Institute. Control of composition in
steelmaking; papers and discussions from the annual
general meeting of the Iron and Steel Institute held
.. .(in) London, 4 and 5 May 1966. (6), 234p. 1967.
The Institute, London. (Publication no. 99). 80/-.
. Index to publications of the iron and steel
institute, 1966. 185p. 1967. The Institute, London.
Journees internationales detude sur roxydation des
metaux, Brussels, October 6-8, 1965. Proceedings.
309p. 1966. Societe d'Etudes de Recherches et ^Applications
pour 1' Industrie, Brussels.
International meeting for the study of oxidation of metals.
Kaes, H. Erfahrungen mit dem StaJil 14MoV63.
Bericht des VGB-Ausschusses fur Materialfragen.
80p. 1966. Vereinigung der Grosskesselbesitzer, Essen.
25 DM
Experiences with steel 14MoV63 (CrMoV steel).
Kaluza, Eberhard, Vom Eisenerz zum Fertigteil. (Einsatz-
und Verarbeitungsprobleme). 152p. (1965).
Cirardet, Essen. 19.80 DM.
From iron ore to finished parts. (Charge and processing
problems).
18

Khimushin, F. F. Zlxaroprochnye stali i splavy. 672p.
1964. Metallurgiya, Moscow. 2R. 21K.
High-temperature steels and alloys.
Kraup, K. Die Gleicligewichte zwischen Eisenschmelzen
und Schlacken des Systems FeO„-CaO-PiOi-
MgO bei 1600°C. 49p. 1966. Bergakademie, ClaustahJ,
Dissertation. Equilibria between iron melts and slags of
the system FeO..CaO.P,05-MgO bei 1600°C
Kriulin, A. V. SuTfotsianirovanie stali i chuguna. 223p.
1965. Mashinostroenie, Moscow. 82k.
Sulfocyaniding of steel and cast iron.
Kubaschewski, O. and others. Metallurgical thermochemistry.
Ed. 4. xix. 495p. 1967. Pergamon, Long
Island City, N. Y. (International series of monographs
in metal physics and physical metallurgy, v.
1). $11.75.
Kunze, H. D. Aquivalente Wirkung von Zusatzelementen
auf Loslichkeit, Aktivitat und Aktivitatskoeffinziernten
des Stickstoffs bzw. Schwefels in Eisenschmelzen
bei 1600"C. lOOp. 1965. Bergakademie,
Clausthal.
Dissertation. Equivalent effect of additional elements on
solubility, activity and activity coefficients of nitrogen and
sulphur in iron melts at 1600°C.
Lead Development Association. Bibliography of leaded
steels, 193S-1965. 8p. (1967). The Association,
London.
Mackowiak, J. Physical chemistry for metallurgists
311p. 1967. (c.1965). American Elsevier, New York.
$7.75.
Massalski Tadeusz Bronislaw, ed. Alloying behavior
and effects in concentrated soliil solutions. 445p.
19

1965. Gordon and Breach, New York. (Metallurgical
society conference, v. 29). $22.50. Paper $9.50.
Materials Technology Symposium, Billingham, England,
1964. Materials technology in steam reforming
processes; proceedings ed. by C. Edeleanu. 392p.
1966. Pergamon Press. Oxford. $14.
Materials selection, welding, corrosion and mechanical
properties of heat resistant alloy and steel tubing.
Metal Bulletin. Ferro-alloys. 158p. 1966. Metal Information
Bureau. London. £2.
Meyer, Jerome S. Iron and steel. 92p. 1966. World
Publishing, Cleveland, Ohio. $3.50.
Juvenile, grades 7-9.
Meyer, Peter Rudolf. Untersuchung uber die Eigtuing
einiger Heissextraktionsverfahren fur die Bestimmung
des Geshaltes in F.delstahlen. 80p. 1965. Technieshe
Hochschule, Aachen.
Dissertation. Research on the suitability of several hot
extraction procedures for the determination of gas content
in high grade steels.
National Metallurgical Laboratory. Annual report.
1965-1966. 231p. (1967). The Laboratory, Council
of ScientiBc and Industrial Research, Jamshedpur,
India.
Patterson, Wilhelm, and others. Einfluss der Eisenbegletter
auf Kohlenstoffloslichkeit, Kohlenstoffafoivitat
und Sattigungsgrad im Gusseisen. 30p. 1966. Westdeutscher
Verlag. Cologne. (Forschungsberichte des
Landes Nordrhein-Westfalen no. 1622). 24 DM.
Effect of inclusions on the carbon solubility, carbon activity
and degree of concentration in cast iron.
Phillips, C. S. G., and R. J. P. Williams, Inorganic
chemistry. V. 2 Metals. 683p. 1966 Oxford University
Press, New York. $8.
20

Priess, K. Kriechuntersuchungen an Technischen Kohlenstoffstahlen
in Temperaturbereich von 425" bis
620°C. 92p. 1965. Technische Hochschule, Aachen.
Dissertation. Carbon steels in the temperature range 425-
620 CC.
Putzier, Udo. Rcduktionskinetische Untersuchungen
an Eisenoxyden unter besonderer Berucksiclitigung
der Porigkeit sowie des Absolut- und Partialdruckes
der Komponenten der Gaspltase. Zusammenliange
zwischen Reduktionsgrad und -temperature, Porigkeit,
Festigkeit und Pliasenzusammensetzung. 70p.
1966. Technische Hochschule, Aachen.
Dissertation. Research on kinetic reduction of iron oxides
with particular consideration of the porosity at absolute and
partial pressures of the components of the gas phase; relation
between the degree of reduction and the temperature, porosity,
strength and phase formation.
Rogers, Bruce A. Nature of metals. Ed. 2. x, 324p.
1965. American Society for Metals, Metals Park,
Ohio. $4.95.
Samans. Carl H. Metallic materials in engineering.
532p. 1967. Maemillan, N. Y. $12.50.
Samarin, A. M., ed. Eksperimental-naya tekhnika i
metody vysokotemperaturnykh izmerenii. 235p.
1966. Ozdatelstvo Nauka. Moscow.
Experimental techniques and methods of high-temperature
measurement.
Schaeffer. H. D. Untersuchungen uber die Reduktion
von Eisenoxid mit Wasserstoff bei Niedrigen Temperaturen.
135p. 1966. Bergakademie, Clausthal.
Dissertation. Investigations on the reduction of iron oxide
with hydrogen at low temperatures.
Schenck, Hermann, and Franz Neumann. Uber den
Einfluss von Zusatzelementen auf das Verhalten des
21

Kohlenstoffes in flussigen Eisenlegierungen und die
Beziehung zu Hirer Stellung im Periodischen System.
29p. 1966. Westdeutscher Verlag, Cologne.
(Forschungsberichte des Landes Nordrhein-Westfalen
no. 1580). 23 DM.
On the influence of alloying elements on the behavior of
carbon in liquid iron alloys with reference to their position
in the periodical system.
Scholes, P. H. Review of tlie work of the analytical
cliemistry section. 1967. British Iron and Steel Research
Association, London. (MG/D/459/67).
Smithells, Colin J. Metals reference book. 3v. 1967.
Plenum, New York. $63.
Stahlberatungsstelle (Freiberg). Qualitats- und Edelstahle
der Deutschen Demokratischen Republik.
V. 2. Eigenscltaften, Beliandlung Versendung. Stahlgruppen
17 bis 29. 447p. 1966. Deutscher Verlag fur
Grundstoffindustrie, Leipzig. 32.-MDV.
Quality and special steels in the Democratic Republic of
Germany. V.2. Properties, treatment, uses. Steel divisions 17-
29.
Symposium on friction and lubrication in metal processing,
1966. 296p. 1966. American Society of
Mechanical Engineers, New York. $15.
Tweeddale, J. G. Metallurgical principles for engineers:
the control, manufacture, manipulation and
use of metals. 560p. 1967. Iliffe, London. 35s.
Vacuum metallurgy conference (9th), 1966. Transactions,
edited by M. A. Orehoski and R. F. Bunshah.
460p. (1967?). American Vacuum Society.
Boston, Mass.
Verein Deutscher Eisenhuttenleute. and Centro Nacional
de Investigaeiones Metalurgicas. Stahleisen-
22

Worterbuch Deutsch-SpaniscJt, Spanisch-Deutsch.
Ed. 2. 373p. 1966. Verlag Stahleisen, Dusseldorf.
20 DM.
Steel dictionary. German-Spanish, Spanish-German.
Wever, Hans. Denkschrift zur Lage der Metallforschung.
Im Auftrage der Deutschen Forschungsgemeinschaft,
Ausschuss fiir angewandte Forschung.
76p. 1966. Steiner, Wiesbaden. (Angewandte Forschung.
Denkschrift Teil 9). 12 DM.
Report on the state of metallurgical research; sponsored
by the German Research Association Committee on Applied
Research.
Zahn, R. Stofftransport auf « -Eisen und Seine Ab-
Itandigkeit vom Sauerstoff-Potential der Atmosplmre.
176p. 1964. Bergakademie, Clausthal.
Dissertation. Material transfer in or-iron and its dependence
on oxygen potential of the atmosphere.
Government Publications
Addition of Yttrium to stainless steels by P. D. Parsons.
8p. 1967. United Kingdom Atomic Energy
Authority, SpringBelds, England. (TRC-Report-
1345). CFSTI: N67-23684.
. 7p. 1967. CFSTI: N67-31373.
Basic types of deformation microcontours appearing
on the surface of commercial iron test-pieces during
fatigue testing under heating in vacuo, by M. G.
Lozinskii and A. N. Romanov. 15p. June 1967.
CFSTI: N67-36191.
Translation from the Russian. Originally published, 1965.
Bibliography and index of Naval Applied Science
Laboratory technical reports on high strength steels.
Progress report no. 5,1959-1966, by F. Ginsberg and
I. L. Stern. 68p. Feb. 1967. Naval Applied Science
23

Laboratory, Brooklyn, N. Y. CFSTI: AD-647 872;
N67-244S6.
Borbestimmung in Stahl mit Hilfe kernphysikalische
Untersuchungsmethoden, by T. Cless-Bemert. 20p.
1966. CFSTI: N67-26118.
Boron determination in steel using nuclear physics research
methods.
Chemical contouring of 3 per cent chromium-molybdenum-vanadium
and 5 per cent chromium-molybdenum
liigh-strength steel sheet. 49p. Mar. 1964.
Bristol Aerojet Ltd., Bamvell, England. CFSTI:
ARC-CP-811.
Contribution a Xetude du frittage du fer excarbony
en phases alpha et gamma par examen des surfaces
de rupture au microscope electronique, by Marie
Therese Oxely. 60p. 1966. Commissariat a l'Energie
Atomique, Saclay (France). Centre d'Etudes Nucleases.
CFSTI: PB 173 752.
Dissertation. Contributions to the study of the sintering of
excarbonyl iron in the alpha and gamma phases using the
microfractographical technique.
Determination of zirconium, niobium, and hafnium i
low alloy steels by x-ray spectrography, by Dorothy
J. Reed. 27p. Dec. 1965. Department of Mines and
Technical Surveys, Ottowa, Canada. NP-16396.'
$0.75.
Development and application of very-strong steels,
by E. Ineson. 82p. 1966. Inter-Service Metallurgical
Research Council. HMSO. 20s.
Equilibris de fases no sector uranio-UCot-UFei do
tema uranio-cobalto-ferro, by Gunter Petzow and
A. Oliveira Sampaio. 20p. 1965. Laboratorio de Fis-
24

ica e Engenharia Nucleares, Junta de Energia Nuclear,
Sacovem, Portugal. LFEN-39.*
Phase equilibria in uranium-cobalt-iron alloys in the
partial range U-UCorUFe,.
Etude des possibilites d'utilisation industrielle de
Vanalyse par activation pottr le dosage de I'oxygene
et eventuellement de Xazote et de Xhydrogene dans
les aciers. Premiere partie: rapport bibliographique,
by N. Stoll and others. 49p. Nov. 1966. CFSTI:
N67-19186.
. Deuxieme partie: description et restdtats des
essais. 69p. Nov. 1966. CFSTI: N67-19189.
-. Trosieme partie: discussion ses essais et conclusions
a tirer de I etude. 28p. 1966. CFSTI: N67-
19067.
Investigations on the industrial application possibilities of
activation analysis for the determination of oxygen and
eventually of nitrogen and hydrogen in steel, pt.l. Bibliographical
report, pt.2. Description and results of the test.
pt.3. Discussion of the tests and conclusions to be deduced
from the investigation.
Fabrication history of alloys used in the irradiation
effects on reactor structural materials program, by
T. T. Claudson. 140p. Oct. 1965. CFSTI: BNWL-
CC-236.
Handbook of binary metallic systems. Structure and
properties, v.2. Physicochemical properties of the
elements. Systems of bismuth, dysprosium, europium,
gadolinium, gallium, germanium, Itafnium, holmtum,
hydrogen, iron, tungsten, and vanadium, by A. E.
Vol. 888p. 1962. CFSTI: TT-66-51150.
Phase diagrams, crystal structures, and physical and
chemical properties of binary alloys and systems of the elements.
Translated from the Russian.
25

High purity austenitic alloy fabrication procedures, by
J. S. Armijo. and others. Up. June 1966. CFSTI:
CEAP-5026.
Initial evaluations of metallurgical variables as
sible factors controlling radiation sensitivity of structural
steels, by J. R. Hawthorne and L. E. Steele.
40p. 1966. U. S. Office of Naval Research. (NRL
report no. 6420). CFSTI: AD 642 290.
Investigation of the frequency of annealing twins
the iron-nickel-chromium alloy system, by R. L.
Cowan and R. W. Staehle. 84p. Oct. 1966. CFSTL
N67-25940.
Investigations of magnetically soft, high-temperat
cobalt-iron alloy, by John Barranger. 7p. 1966. U. S.
National Aeronautics and Space Agency. CFSTI:
NASA-TN-D-3693. $1.
Iron and iron-chromium alloy silica reaction studi
Interim report no. 1, Dec. 1965-Nov. 1966, by D. R.
Muzyka, and G. A. Colligan. 143p. Nov. 1966.
Dartmouth College. Thayer School of Engineering,
Hanover. N. H. CFSTI: AD-655 584.
Materials data handbook. Type 301 stainless steel,
John Sessler and Volker Weiss, eds. 157p. June 1966.
CFSTL N67-27516.
Metastable beta sheet alloy Ti-SMo-8V-2Fe-3Al, pt.
Final technical report, by Donald B. Hunter. lOlp.
Oct. 1966. CFSTI: N67-26780.
On the effect of nitrogen on tlie mecltanical prop
of neutnm irradiated pure iron, by A. Ferro and
others. 34p. Dec. 1966. CFSTI: N67-21157
EURAEC-1472.
26

Permeation and diffusion of fiydrogen isotopes
through stainless steels. Pt. 4. The diffusion of titrium
through S110 and En58E steels at 80 deg. C,
by P. M. S. Jones and R. Gibson. 20p. Sept. 1966.
Atomic Weapons Research Establishment, Aldermaston,
England. CFSTI: AWRE-0-58/66. $0.60.
HMSO. 3s.
Preparation and properties of stai'tless steels. Q
ly report no.3, January 1-March 31, 1966, by G.
Chaudron. 13p. Centre National de la Recherche
Scientifique, Paris. CFSTI: EURAEC-1642.
. Quarterly report no.4, April 1-June 30, 1966.
21p. CFSTI: EURAEC-1678.
Primera conferencia de expertos Latinoamericanos e
metalurgia de transformacion, Buenos Aires, Aug.
18-23, 1964. v.l. 436p. Aug. 1966. CFSTI: N67-
14801. v.2. 399p. Aug. 1966. CFSTI; N67-15501.
First Latin American conference on process metallurgy and
metal working.
Progress in mass spectrometry for the analysis of steel
and high purity iron, by P. H. Scholes and P. S.
Bramhall. 14p. Nov. 1965. CFSTI: MG/D-312/65.
Quarterly metallurgy progress report 31, Apr. 1-J
30, 1966. 44p. 1966. U. S. Bureau of Mines. Albany
Metallurgy Research Center, Albany, Oregon.
CFSTL USBM-RC-1249.
Quarterly metallurgy progress report 32, July 1-Se
30, 1966. 36p. 1966. CFSTI: USBM-RC-1264.
Radiochemical aiwlysis: activation atuUysis, instr
tation, radiation techniques, and radioisotope techniques,
July 1965-June 1966, by James R. DeVoe,
27

ed. 238p. 1966. U. S. National Bureau of Standards.
GPO: NBS-TN-404. $1.25.
"A number of analyses of standard reference materials by
activation analysis are described (e.g. Cu in cast iron,
SRM82b; Se in selonium steel, SRM1170; Al in steel,
SHM14e; and V in stainless steel, SRM73c)."
Research on meclmnisms of alloy strengthening. 1.
loy strengthening by fine oxide particle dispersion.
2. The splat cooling process for alloy development,
by Nicholas J. Grant. 12p. Dec. 1966. Massachusetts
Institute of Technology, Department of Metallurgy,
Cambridge. CFSTI: N67-19961.
. Semiannual report. 19p. June 1967. CFSTI:
N67-35349.
Residual resistance ratio of pure iron, by A. I. S
ler and B. C. La Roy. 8p. 1966. U. S. OfFice of Naval
Research (NRL report no. 6395). CFSTI: AD 640
068.
Some observations on niobium in steel, by D. R. Be
and C. P. Contractor. 54p. (1966). Physical Metallurgy
Division. Mines Branch. Department of Energy,
Mines and Resources, Ottawa. (RS-11). $0.25.
Some physical characteristics of A1S1 type 304 con
taining nitrogen. Report 43S-B, The relationship of
nitrogen content of austenitic stainless steels to stress
corrosion. 34p. Sept. 1966. Virginia Polytechnic Institute,
Dept. of Metals and Ceramic Engineering
Blacksburg, Va. CFSTI: EURAEC-1732.
(Studies of stainless steels). Anntial report, Jul
June 30. 1966. Special report no.2, by G. Chaudron.
Centre National de la Recherche Seientifique, Paris
France. lOp. 1966. CFSTI: EURAEC-1797.
2$

Study of as-rolled carbon steels over ranges of uranium,
sulfur and carbon contents, by D. K. Faurshou.
54p. May 1966. Department of Mines and Technical
Surveys, Mines Branch, Ottawa. $1.
Sttuly of parent metal for use in research into br
fracture of large weldments. Quarterly report no.6,
July 1-Sept. 30, 1965. 20p. Oct. 1965. Institute de
Recherches de la Siderurgie, St. Gcrmaine-en-Laye,
France. (EUR-2657). CFSTI: EURAEC-1499; N67-
27920.
Study of the base metal intended for research on t
brittle fracture of large weldments. Quarterly report
no.9, April 1-June 30, 1966. 7p. Institute de Recherches
de la Siderurgie, St. Germaine-en-Laye,
France. CFSTI: EURAEC-1700; N67-20987.
. Quarterly report noJO, Jtd. 1-Sept. 30, 1966.
lOp. Nov. 24, 1966. CFSTI: EURAEC-1756; N67-
23219.
-. Technical report. May 1, 1965-Apr. 30, 1966.
31p. Apr. 1966. CFSTI: EURAEC-1669; N67-14094.
Final report no J. 62p. Dec. 1966. CFSTI:
EURAEC-1788; N67-29734.
ORES; ORE PREPARATION
Al-Shanti, Ahmed M. S. Oolitic iron ore deposits o
Wadi Fatima between Jeddah and Mecca, Saudi
Arabia. 51p. Ministry of Petroleum and Mineral
Resources, Jedda, Saudi Arabia.
American Iron Ore Association. Iron ore 1966. 135p
cl966. The Association- Cleveland, Ohio.
Borkowski, E. D. Lagerstattenkudliclte Untersuchun
gen an den Eisenerzvorkommen von Acari Pent.
29

169p. 1966. Bergakademie, Clausthal.
Dissertation. Stratigraphical investigations on the iron ore
deposits in Acari (Peru).
Flawn, Peter T. Mineral resources. Geology, engineering,
economics, politics, law. 432p. 1966. Rand
McNally, Chicago. $8.
North, Oliver. Mineral processing patents issued d
ing 1965. 139p. (1967?). Noyes Development Corp.,
Park Ridge, N. J. $15.
United Nations. Economic Commission for Europe.
Economic aspects of iron-ore preparation, xiv, 280p.
1966. The author. New York. $4.
Government Publications
Development of method to improve the quality of
conventional Michigan iron ores, by J. C. Nigro and
M. E. Volin. 61p. Dec. 1965. CFSTI: PB 174 055.
Iron ore, by F. E. Brantley. 35p. 1967 (Minerals y
book. 1965. Preprint). GPO. $0.15.
Iron resources of South Dakota, by C. M. Harrer. 1
1966. U. S. Bureau of Mines, Pittsburgh, Pa.
Laboratory and pilot plant development of flotatio
procedures for fine-grained hematitic ores of Marquette
Range, Michigan, by R. T. Sorensen and D.
W. Frommer. 34p. 1967. U. S. Bureau of Mines,
Pittsburgh, Pa. (Report of investigations, no. 6976).
Lake Superior iron resources, preliminary samples
and metallurgical evaluation of selected Michigan-
Wisconsin iron formations, by L. F. Heising and D.
W. Frommer. 35p. 1967. U. S. Bureau of Mines,
Pittsburgh, Pa. (Report of investigations no. 6895).
30

Irfke Superior iron resources, reexamination of nonmagnetic
taconite occurrences in Hibbing, Minn.,
area by flotation, magnetic separation, and petrographic
methods, by L. F. Heising, and others. 24p.
July 1967. U. S. Bureau of Mines, Pittsburgh, Pa.
(Report of investigations, no. 6991).
Study on iron ore in India, vi, 92p. 1966. Committ
Natural Resources, New Delhi.
Wyoming iron-ore deposits, description, beneficiat
processes and economics, by C. M. Harrer. 122p.
(1966). U. S. Bureau of Mines, Pittsburgh, Pa. (Information
circular no. 8315).
EXTRACTION AND REFINING
American Institute of Mining, Metallurgical and Petroleum
Engineers. Iron and Steel Division. Ironmaking
proceedings, 1964. 426p. 1966. Gordon and
Breach, New York. $15.
American Institute of Mining, Metallurgical, and P
troleum Engineers. Iron and Steel Division. National
Open Hearth and Basic Oxygen Steel Committee.
National open hearth and basic oxygen steel conference,
49th, held in Chicago, Apr. 18-20,1966. 100,
250p. 1967. The Institute, New York.
American Society for Testing and Materials. Compar
son of the properties of open hearth and basic oxygen
alloy steels. 20p. 1966. The Society, Philadelphia.
(ASTM Data Series, DS 42). $1.50.
Australasian Institute of Mining and Metallurgy an
the University of New South Wales. Research in
chemical and extraction metallurgy; proceedings of
a symposium of the Sydney branch of the Australian
31

Institute of Mining and Metallurgy and the University
of New South Wales. 1967. The Institute, Melbourne.
$7.12.
Blume, Helmut. Einfluss der Erzeugungsbedingungen
in Sauerstoffaufblas-Staldwerken auf Konstruktion
und Gewicht der Hallenbauten. 37p. 1966. Technische
Hochschule, Aachen.
Dissertation. Effect of production conditions in oxygen
converter steelmaking on design and stress of hangar structures.
Bogdandy, Ludwig von and Hans-Jurgen Engell. Die
Reduktion der Eiseneze. xvi, 539p. 1967. Verlag
Stahleisen, Dusseldorf. 135 DM. Springer, New
York. $33.75.
Reduction of iron ores.
British Iron and Steel Research Association. Steelmaking
Division. Nomenclature of Continuous Casting
Defects Group. Definitions and causes of continuous
casting defects. (8), 39p. 1967. Iron and Steel Institute,
London. (Publication no. 106). 30/-.
This work lists definitions and causes of defects in an
attempt to promote the standardization of nomenclature.
Engels, A. Quantitative Untersuchungen uber die Einflusstaktoren
auf die Graphitisierung von Temperguss.
62p. 1966. Bergakademie, Clausthal.
Dissertation. Quantitative investigations of the factors
affecting the graphitization of malleable cast iron.
Gilchrist, James Duncan. Extraction metallurgy. 291p.
1967. Pergamon, Long Island City, N. Y. $6.
Heyer, Klaus. Reaktionem des Kohlenstoffs im flussigen
Eisen unter vermindertem Druck bei silizium- und
chromlegierten Stahlen. 49p. 1966. Technische
Hochschule, Clausen.
32

Dissertation. Carbon reactions with silicon and chromium
steel alloys in molten iron under reduced pressure.
Hills, Arthur William David. Heat and mass transfe
in process metallurgy. 252p. 1967. Institution of Mining
and Metallurgy, London. 60s.
Hoenie, A. F., and others. Vacuum-degassed steels
from the consumers viewpoint. 27p. Sept. 1966.
Battelle Memorial Institute, Columbus, O. (DMIC
memo no. 219).
Hoyle, C. and others. Electro-slag refitting techn
64p. 1967. British Iron and Steel Research Association,
London. (Report no. MG/A/416/66).
Hufnagel, F. J. Stickstoffverteilung in Hochofen S
stoffbewegung im Siemens-Martin-Ofcn. 92p. 1966.
Bergakademie, Clausthal.
Dissertation. Nitrogen distribution in the blast furnace
and nitrogen movement in the open hearth furnace.
Iron and Steel Engineer. Continuous and pressure c
ing. 128p. cl964. Association of Iron and Steel
Engineers, Pittsburgh, Pa.
Jackson, A. Modern steelmaking for steelmakers. Re
ed. xii, 323p. 1967. Newnes, London. $10.40.
Jecht, Rudi. ed. Fachkunde fur den Siemens-Martin-
Stahlwerker. 231p. 1966. Deutscher Verlag fiir
Grundstoffindustrie, Leipzig. 17.50 DM.
Science and technology for the open hearth steelworker.
Kitaev, Boris Ivanovich, and others. Heat exchange
shaft furnaces; translated from the Russian by M.
M. Page and H. Simons, xviii, 301p. Oct. 1967. Pergamon,
London. 90/-.
Originally published in Moscow, 1957.
33

Koch. Walter, and Gunther Holec. Isolierung und Untersuchungen
der Oxydeinschlusse in unberuhigten
und teilberuhigten Stahlen. 44p. 1967. Westdeutscher
Verlag, Cologne. (Forsehungsberichte des
Landes Nordrhein-Westfalen, Nr.lS02). 31.60 DM.
Isolation and analysis of oxide inclusions in unkilled and
partly killed steels.
Kocho, Valentyn Stcpanovych, ed. Continuous control
of the temperature of molten steel during the refining
period of the open-hearth process, iii, 237p. 1967.
National Lending Library for Science and Technology.
Boston Spa, Yorks, England. 21/6.
Translated from Nepreryvnyi kontroV lemperatury zhidkoi
slali v period dovodki martcnovskoi ptavki.
Melford, D. A. Comparison of automatic inclusioncounting
techniques developed in the United Kingdom.
6p. (1965). British Iron and Steel Research Association,
London. (SM/BE/125/65).
Montgomery, W., and N. W. Shepherd. Oxy/fuel burners
in an open hearth furnace. (18) p. 1965. British
Iron and Steel Research Association, London.
(SM/Conf/127/63).
Schulz. Karl Dieter. Uber die Einstellung der "berichtigten
Schwefelverteilung" im Hochofenprozess. 2Sp.
1964. Technische Hochschule. Aachen.
Dissertation. On the control of the "corrected sulfur distribution"
in the blast furnace process.
Sharp, John David. Electric steelmaking. 136p. 1966.
Uiffe, London. (Modern steelmaking practice series).
37/6.
Soen, Oen. and Hans Pauly. Sulphide paragenesis
With pyrrhotite and marcasite in the siderite-cnjolite
34

ore of Ivigtut, South Greenland. 55p. 1967. C. A.
Reitzel, Copenhagen. 20 kr.
Tcichert, E. Untersuchungen uber Aufnalime von
Kohlenstoff, Wasserstoff, Sauerstoff und Stickstoff im
Flussigen Thomasroheisen in Abhangigkeit von den
Bedingungen im Hochofen. 123p. 1965. Technische
Hochschule, Aachen.
Dissertation. Investigations on the absorption of carbon,
hydrogen, oxygen and nitrogen in liquid basic Elessemer pig
iron as a function of conditions in the blast furnace.
Wysocki, H. Bcitrag zur Kenntnis der Vorgange vor
den Blasformen des Hochofens. S5p. 1966. Bergakademie,
Clausthal.
Dissertation. Contribution to knowledge of the processes
in front of the tuyeres in the blast furnace.
Younis, Abdel-Fattah Ahmed. Untersuchung uber die
Bedeutung des Sauerstoffumsatzes beim Abstich, Abgiessen,
Auskoclien und Erstarren von unberuhigtem
Stahl. 42p. 1966. Technische Hoschule, Aachen.
Dissertation. Examination of the significance of oxygen
reactions during pouring, casting, boiling and solidification
of rimmed steel.
Government Publications
Blast furnace operation with natural gas injectioit and
oxygen-enriched blast, by R. J. Leary and P. L.
Woolf. 24p. 1967. U. S. Bureau of Mines. Pittsburgh,
Pa. (Report of investigations, no. 6977).
Developing a thermochemical model for the iron blast
furnace. Mathematical model of the reduction zone,
by Hillary W. St. Clair. 35p. 1967. U. S. Bureau of
Mines, Pittsburgh, Pa. (Report of investigations
no. 6975).
Developing a thermochemical model for the iron blast
furnace. Measurement of rate coefficient for reduc-
35

Hon of iron ore pellets in a packed bed, by Hillary
W. St. Clair. 25p. Oct. 1967. U. S. Bureau of Mines,
Metallurgy Research Center, College Park, Md.
N67-37417.0
Effect of lime structure in oxygen steelmaking, by
F. X. Tartaron and J. D. Ruschak. 41p. 1967. U. S.
Bureau of Mines (Report of investigations no. 6901).
CFSTI: N67-2344L
Electroslag remelting and quality of metal, by S.
Leibenzon. (Mp. Apr. 1967. CFSTI: AD-656 561.
Translation of Russian monograph: Elcklroshlakovyi pereplav
i kachestvo me7a//a. Moscow, 1965.
Investigations of foamed metals for launch and spa
vehicle applications, by Edward R. Byrnes and
Charles J. Twine. 131p. May 1966. CFSTI:
N66-29907.
Investigations of methods for production of porous metals
(A). Ti. Ni. 316 stainless steel, steel and Mo).
Preparation of CrFe alloys, by J. E. Cox. 18p. 196
U. S. Office of Naval Research (NRL report no.
6457). CFSTI: AD-641 896.
FOUNDRY
American Foundrymen's Society. Analysis of casting
defects, vi, 138p. 1966. The Society, Des Plaines, QL
$12.
. Basic principles of gating; programmed learning
course. 78p. 1967. Addison-Wesley, Reading,
Mass. $5.
-. Casting and annealing of heavy section white
iron. 38p. 1966. The Society, Des Plaines, 111. $8.
. Developments for eliminating deformation
36

and cracking in shell molds and cores during casting.
(1965?). The Society, Des Plaines, 111. $5.
-. Effect of green sand additives on mold cavity
enlargement in gray iron castings. 1965. The Society,
Des Plaines, 111. $5.
-. Fertilization of ductile iron. 9p. (1967?). The
Society, Des Plaines, 111. $5. (Members $2.50).
-. Foundry air pollution control manual. Ed. 2.
66p. 1967. The Society, Des Plaines, III. $15. (Members
$7.50).
-. Foutulry noise manual. Ed.2. 1966. The Society,
Des Plaines, III. $12. (Members
Gating of die castings. 87p. 1965. The Society,
Des Plaines, III. $6.
-. Macroinclusions in steel castings. 28p. 1966.
The Society, Des Plaines, III. $10. (Members $5).
-. Temperature loss from gating systems. 6p.
1966. The Society, Des Plaines, 111. $5. (Members
$2.50).
. Trace elements and pinlioles in gray iron. 33p.
1965. The Society, Des Plaines, 111. $5.
-. Water pollution from foundry wastes. 58p.
1967. The Society, Des Plaines, 111. (Publication no.
14). $18. (Members $9).
American Foundrymen's Society. Training and Research
Institute. Metalcasting—instructors guide.
Ed.2. lllp. 1967. The Society, Des Plaines, III. $15.
(Members $7.50).
British Cast Iron Research Association Cupola oper
tion and control. 59p. (1965). The Association, Alvechurch,
Birmingham. 20/-.
37

Congresso nacional de fundicao, Opporto, 1965. ca.
200p. 1967. Associacao Portuguesa de Fundicio, Lisbon.
National foundry congress proceedings.
Dietert, Harry W. Foundry core practice. Ed. 3. 281p.
1966. American Foundrymen's Society, Des Plaines,
111. $20. (Members $10).
Formation Professionelle du Syndicat General des
Fondeurs de France. Commission Nationale. Technology
of gravity die casting; translated from the
French by B. Haracopos. xii, 243p. 1967. Newnes,
London. 63s.
Gerhard, Engels, and Ekkehard Weber. Kupolofenentstaubung.
Ein Leitfaden fur Planung, Bau und Betrieb
von Kupolofenentstaubungsanlagen. 167p.
1967. Giesserei-Verlag, Dusseldorf.26 DM.
Cupola oven dust removal. A manual for design, construction,
and operation of cupola oven dust removal installations.
Giesserei-Kalciuier, 1967. 362p. 1967. Verein Deutscher
Giessereifachleute. Dusseldorf. 6 DM.
Foundry calendar. Reviews developments in foundry work.
Includes a comprehensive survey of German specifications
for cast steel.
Heine. Richard W., and others. Principles of metal
casting. Ed.2. 736p. 1967. McGraw-Hill. New York.
$16.50.
Roesch, Karl, and Kurt Zimmermann. Stahlguss. xiv,
358p. 1966. Verlag Stahleisen, Dusseldorf. 74 DM.
Steel castings.
Schmidt, K. G. Staubbeliompfung in der Giesserei Industrie.
Ed. 2. 1967. VDI-Verlag. Dusseldorf.
The struggle against dust in the foundry industry.
38

Schneider, Philipp, and others, eds. Temperguss. xiv,
436p. 1966. Geisserei-Verlag, Dusseldorf. 86 DM.
Malleable iron castings.
Verein Deutscher Giessereifachleute. Jaliresubersichten
des Giessereiwensens 1965. 153p. (1967?). The
Federation, Dusseldorf. 22 DM.
Annual review of foundry practice 1965. 27 articles from
Cidsscrci plus critical summaries of 1350 articles published
in German and foreign foundry publications during 1965.
Government Publications
Casting science, by M. J. Hillier. 250p. 1967. CFSTI:
N67-36119.
Investigation of solidification of high-strength steel
casting. Interim report, Oct. 1, 1964-Sept. 30, 1965,
by D. R. Poirier and M. C. Flemings. 122p. Sept.
1965. CFSTI: N67-23626.
Steel casting ami foundry work in the USSR. 39p. Nov.
1966. CFSTI: N67-12810.
Translated from the 18rh Vsesoyuznnya konterentsiya Iiteyshcfiikov.
Machine Building Press. Moscow. 1966.
MECHANICAL WORKING
American Society for Metals. Metals handbook, v.3.
Machining. 552p. (1967). The Society, Metals Park,
Ohio. $35. (Members $17.50).
American Society for Testing and Materials. Correlation
of deep drawing press performance with tensile
properties. 3Sp. 1966. The Society, Philadelphia.
(ASTM special technical publication, no. 390).
$1.75.
American Society of Tool and Manufacturing Engineers.
Cold bending and forming tube and other
sections. 304p. 1966. The Society, Dearborn, Mich.
39

. High-velocity forming of metals, xiii, 188p.
cl964. Prentice-Hall, Englewood Cliffs, N. J. $7.50.
•. Machining the space age metals. 165p. 1965.
The Society. Dearborn. Mich. $3.75.
Non-traditional machining processes, 178p.
(1967). The Society. $3.75. (Members $2.75).
Asemann, Heinz. Die Entwiclilung der elektrischen
Walzwerks-Umkehrantriebe in Deutschland und in
den Vereinigten Staaten. 137p. 1965. Technische
Hochschule, Aachen.
Dissertation. The development of electric reverse drive
rolling mills in Germany and the United States.
Bohr, Horst. Gezogener und kalt gewalzter Edelstahl
in den Jahren 1952-1967, dargestellt in Vortragen.
220p. 1967. Edelstahl-Ziehereien-Vereinigung; Edelbandstahl-Vereinigung.
Diisseldorf. 12 DM.
Drawn and cold rolled high-alloy steel in the years 1952-
1967. presented in lectures.
Bowden, F. P., and D. Tabor. Friction and lubrication.
166p. (1967). Methuen, London. 21s.
British Iron and Steel Research Association. Conference
on heating for forging, and press and manipulator
control held at Harrogate in April 1964. The
Association, London. (MW/Conf. Proc/33/64).
Chamouard, A. Estampage et forge. V.l Statique appliquee
aux deformations a chaud par forgeage, filage
et matricage. xii, 194p. 1964. Dunod, Paris.
. V.2 Dynamique appliquee aux deformations a
chaud par forgeage, filage et matricage. x, 346p.
1966.
Stamping and forge: applied statics in hot deformations
in forging, extrusion and die work. Stamping and forge, v.l.
40

Applied statics. . .v.2. Applied dynamics. . .Applied dynamics
in hot deformations in forging, extrusion and die work.
Chizhikov, Yu. M. Protsessy obrabotki davlenien legirovannykh
stalei i splavov. 499p. 1965. Metallurgiya,
Moscow. 1R.67K.
Processes in the pressure working of alloy steels and
alloys.
Cook, Nathan II. Manufacturing analysis, viii, 229p.
cl966. Addison-Wesley, Reading, Mass. $9.75.
Cooley, R. H. Complete metalworkmg manual. 286p.
1967. Arco, New York. $10.
Cordes. H. Sonderprobleme der numerischen Steurung
in Walzwerken. 13p. 1966. Verein Deutscher Ingenieure,
Dusseldorf. 8 DM.
Special problems in numerical control in rolling mills.
Datsko, Joseph. Material properties and manufactur
ing processes. 543p. 1966. Wiley, New York. $11.95.
Feirer, John Louis. General metals. Ed.3. 470p. 196
McGraw-Hill, New York. $6.40.
Fuchs, F. J., and J. W. Archer. Deep drawing with
trahiglt pressure. 17p. 1967. American Society for
Metals, Metals Park, Ohio. (Technical report no.
C7-13.2).
Galimberti. James M. Carbide machining of superalloys.
22p. 1966. American Society of Tool and
Manufacturing Engineers, Dearborn, Mich. (Paper
no. MR 66-832).
Cavryushin, Y., and others. Metal-cutting machine
tools. 383p. 1967. Central Books, London. 21s.
Translated from the Russian; published in Moscow in
1965.
41

Internationale Schmiedetagung 1965, Berlin. Freiform-
Schmieden in der Entwicklung der ncuen Technik.
lSlp. 1966. Verlag Stahleisen, Dusseldorf. 70 DM.
International forging congress 1965, Berlin. Hammerforging
in the development of the new technology.
Jenson, Jon E., ed. Forging industry handbook, ca.
500p. (1967). Forging Industry Association, Cleveland,
Ohio. $15.50.
Jentzsch. Siegfried, and Alfred Steinegger. Der Einfluss
chemisch aktiver und inaktiver Gase bei der
Behandlung von Staliloberflachen in der Glimmentlathing.
33p. 1966. Westdeutscher Verlag, Cologne.
(Forschungsberichte des Landes Nordrhein-Westfalen
no. 1786). 22.60 DM.
The influence of chemically active and inactive gases on
the treating of steel surfaces in the glow discharge.
Knodel, C. H. New techniques in rigid metal container
manufacture. 13p. 1966. American Society for Metals.
Metals Park, Ohio. (ASM Technical report no.
C6-8.5).
New processes for producing metal containers from tin
plate, Al, and Sn-free steel.
Krantz, Donald E. Explosive forming at North American
Aviation. 8p. 1967. American Society for Metals,
Metals Park, Ohio. {Technical report no. C7-2.4).
. Explosive forming at North American Aviation.
lOp. 1967. American Society- for Metals, Metals
Park, Ohio (Technical report no. W7-4.1).
Krizan, Igor E. Precision chemical milling of aerospace
compoiwnts. 14p. 1966. American Society of
Tool and Manufacturing Engineers, Dearborn, Mich.
(Paper no. MR 66-819).
•12

Kronenberg, Max. Machining science and application;
tlteory and practice for operation and development
of machining processes, xxi. 410p. 1967. Pergamon,
Long Island City, N. Y. $25.
Kuznetsov, Vladimir Dmitricvich. Metal transfer and
build-up in friction atul cutting; translated from the
Russian; ed. by E. H. Freitag. 360p. 1966. Pergamon,
Long Island City, N. Y. $17.50.
Langenecker, B., and others. Critical look at ultrasonic
metalworking processes. lOp. 1966. American Society
for Metals, Metals Park. Ohio. (ASM technical
report no. C6-26.1).
Effects of ultrasound on mechanical properties of Al. Cu
steels and other metals.
Lippmann, Horst, and Oskar Mahrenholtz. Plastomecltanik
der Umfortnung metallischer Werkstoffe.
v.l. 406p. 1967. Springer-Verlag, New York. $17.25.
Plasticity mechanisms of the shaping of metallic materials.
NATO Advanced Study Institute, Sadefjord and Lillehammer,
September 14-25, 1964. High energy rate
working of metals. 2v. (1965). North Atlantic Treaty
Organization, Paris.
Nicholai, Klaus. Lehrbuch der Umform- und Fertigungsverfahren.
v.l. Umformtechnik. 207p. 1967.
Hueber, Munich.
Textbook of mechanical working and fabrication procedures,
v.l. Mechanical working techniques.
Oehler.Gerhard. Gestaltung gezogencr Blechteile. Ed.
2. 152p. 1966. Springer, New York.
Shaping, drawing out sheet sections.
Opitz, Herwart, and others. Verbesserung der Zerspanbarkeit
von unlegierten Battstalden durch nich-
41

metaUische Einscldusse bei Verwendung bestimmter
Desoxydationslegierungen. 75p. 1967. Westdeutscher
Verlag, Cologne. 53.90 DM.
Improvements in machinability of mild steel by means
of nonmetallic inclusions with application to certain deoxidation
alloys.
Parkins, Redvers. Meciianical treatment of metals.
320p. 1967. American Elsevier, New York. $9.
Peschke, Gunther. Rontgenographische Untersuchungen
des Martensit- und RestaustenitzerfaUes beim
Anlassen geltarteter Werkzeugstahle. 97p. 1966.
Technische Hochschule, Munich.
Dissertation. Radiographic examination of the disintegration
of martensite and austenite caused by indurated machine
tools.
Sachs, Ceorg. Principles and methods of sheet metal
fabricating. Ed.2; revised and enlarged by Henry E.
Vocgeli. 556p. 1966. Reinhold, New York. $15.
Springborn, R. K., ed. Cuffing and grinding fluids:
selection and application. 172p. 1967. American Society
of Tool and Manufacturing Engineers, Dearborn,
Mich. $3.75.
Taylor. P. R. Equipment, techniques and uses of thermo-meclianical
treatments. 19p. 1967. British Iron
and Steel Association. London. (Report no. MG/A/
414/66).
Verein Deutscher Kisenhiittenleute. Grundlagen der
bildsamcn Formgebung. 508p. 1966. Verlag Stahleisen,
Dusseldorf. 46 DM.
Principles of plastic deformation.
Zorev, Nikolai Nikoloevieh. Metal cutting meclianics,
translated by H. S. H. Massey. 526p. 1966. Pergamon,
New York. $21.50.
44

Government Publications
Ad hoc committee on metalworking processes and
equipment. Progress report. 25p. Apr. 1967. National
Academy of Sciences—National Research Council,
Washington, D. C. N67-30467.*
Basic electrical discharge machining characteristi
and associated electrode materials and coolants, by
D. R. Alford. 42p. Sept. 1967. CFSTI: Y-1582.
Deformation processing of stainless steels, by D.
Strohecker, and others. 355p. Oct. 1966. Battelle
Memorial Institute, Columbus, Ohio. N67-32031.0
Explosive hardening of iron and low carbon steel,
L. A. Potteiger. 57p. Oct. 1964. CFSTI: AD-453 901.
Feasibility study of the forming of ductile iron,
Duane O. Custad. 31p. June 1967. CFSTI: AD-656
457.
High-velocity metalworking, survey by Michael C. N
land, and others, ix, 183p. 1967. GPO: NASA-SP-
5062. $1.25.
(Metalworking processes and equipmettt). Fifth progress
report, June 1966-April 1967. 20p. Apr. 1967.
National Academy of Sciences—National Research
Council, Materials Advisory Board, Washington,
D. C. CFSTI: MAB-206-M(5).
Novelties in forging and stamping production: sele
articles, by Yu. P. Sogrishin, and others. 42p. Mar.
1967. CFSTI: AD-653 505.
Edited translation of monograph: Novoe v kuznechnoshtampovochnom
proizvodstvif. 1964. Determination of basic
parameters of machines for high-speed metal forming. Study
45

of pressworking of steels in the semi-hot state. Rubber pad
method for high-speed stamping of sheet metal.
Rolling recrystallization textures of commercial g
of low carbon steels, by T. Flavell. 19p. Feb. 1966.
College of Aeronautics, Dept. of Materials, Cranfield,
England. GOA-NOTE-MAT-8."
Selected machining and metal fabricating technolog
compilation. 30p. 1967. GPO: N67-25855. $0.25.
Stretch forming of very long stainless steel skins, by
N. Padley and J. Fray. 22p. Feb. 1967. CFSTI:
AD-649 708.
Warm working of armor plate. Final technical repor
by R. P. O'Shea, and others. 140p. Mar. 1967.
CFSTI: N67-32679; AD-652 079.
POWDER PROCESSING
Beyer, Ernst. Einfluss der Gestalt und Porigkeit kleiner
Eisenteilchen auf Verpressbarkeit und technologische
Eigenschaften der daraus hergestellten Sintcrteile,
43p. 1965. Technische Hochschule, Aachen.
Dissertation. Effect of shape and porosity of small iron
particles on compressibility and technological quality of the
then prepared sintered part.
Hausner, Henry H.. Ed. Modem developments in powder
metallurgy. 3v. 1966. Plenum, N. Y. $80. set.
Hausner. Henry H., and others, eds. New methods fo
the consolidation of metal powders. 260p. 1967.
Plenum, New York. (Perspectives in powder metallurgy,
v.l). $15.
. Vibratory compacting. 306p. 1967. Plenum,
New York. (Perspectives in powder metallurgy,
v.2). $17.50.
46

Internationale Pulvermetallurgischc Tagung (3rd), Eisenach,
13-15 Mai 1965. Bericht. 316p. 1966. Akademie
Verlag, Berlin. 55 DM.
International powder metallurgy conference held in Eisenach,
May 13-15, 1965.
Metal Powder Industries Federation. Progress in powder
metallurgy 1967; proceedings of the twentythird
Annual Powder Metallurgy Conference.
(1967). The Federation, New York. $12.
Sands. R. L.. and C. R. Shakespeare. Powder metallurgy—practice
and applications. 261p. 1966. CRC
Press, Cleveland, Ohio. $19.50.
Wild. R. Fundamental aspects of iron ore sintering.
British Iron and Steel Research Association. London.
(IM/S/65/66).
Government Publications
Making of stainless steel shapes by casting and powder
metallurgy, by J. G. Kura, and others. 217p. Feb.
1967. Battelle Memorial Institute, Columbus, Ohio.
N67-29437.0
Sintering of cermet products compressed by impact
loads, by O. V. Roman and Ye. A. Doroshkevich. 6p.
Jan. 1967. CFSTI: N67-25029.
Properties of cermet products obtained by sintering powdered
iron at temperatures up to 1100°C. under dynamic impact
compression. Translated from Russian.
Strength of sintered ferrous parts with interconnected
porosity. Summary report, July 1, 1966-June 29,
1967. 89p. July 1967. CFSTI: AD-656 622.
HEAT TREATING
American Institute of Mining, Metallurgical, and Petroleum
Engineers. Iron and Steel Division. Electric
47

Furnace Committee. Electric furnace conference
proceedings, v. 23; proceedings of the Metallurgical
Society meeting held in Pittsburgh, Nov. 29-Dec. 3,
1965.187p. cl966. The Society, New York.
Breuer, G. Beitrage zur Kenntnis der EntkoJtlung v
Eisen-Kohlenstoff-Schmelzen. 88p. 1966. Bergakademie,
Clausthal.
Dissertation. Contributions to knowledge of the decarburization
of iron-carbon melts.
Edison Electric Institute. Final report on stress
ing of carbon steel and chrome-molybdenum welds.
3Gp. Sept. 1966. The Institute, New York. (EEI publication
no. 66-71).
Forbes-Jones, R. M., and others. Precipitation har
ing in BCC binary alloys. Progress report to March
1966. 20p. 1966. British Iron and Steel Research Association,
London. (MG/A/78/66).
Heilgenstaedt, Werner. Warmetechnische Reohnungen
fur Industrieofcn. Ed.4. xiv, 600p. 1966. Verlag
Stahleisen, Dusseldorf. 82 DM. (Stahleisen-Bucher,
v.2).
Pyrometric calculations for industrial ovens.
Howes, Maurice A. H. Getting the most out of carbo
triding. 13p. 1966. American Society for Metals,
Metals Park, Ohio. (Technical report no. C6-27.1).
Hughes, T. L., ed. Heat treatment of metals; proce
ings of the inaugural meeting of tfie Heat Treatment
Joint Committee of the Iron and Steel Institute and
the Institute of Metals, held.. .(in) London on 14-
15 Dec. 1965. 202p. 1966. Iron and Steel Institute,
London. £5.
48

Jablonski, Stanislaw. Maly poradnik liartownika. Ed. 3.
466p. (1964). Wydawnictwa Naukowo-Techniczne,
Warszawa. $3.25.
Heat treatment of steel.
Kelir, W. D., and others. Surface attack in carbonitr'tded
ingot iron and A1SI 8620 steel. 13p. 1967.
American Society for Metals, Metals Park, Ohio.
(Technical report no. C7-24.4).
Stiidemann, Hans. Warmebehandlung von Stahl, Gusseisen
und Nichteisenmetallen. Ed.2. 303p. 1967.
Hanser, Munich. 19.80 DM.
Heat treatment of steel, cast iron and non-ferrous metals.
Stiidemann, Hans, and Hans Brundliek. Vergletclt von
Harten, Anlassen, Warmbadharten und Unterkuhlen
in ihren Einfluss auf die technologischen Eigenscliaften
des Stahles X40 Cr 13. 47p. 1967. Westdeutscher
Verlag, Cologne. (Forschungsberichte des Landes
Nordrhein-Westfalen, ne. 1798). 29.30 DM.
Comparison of hardening, tempering, martempering and
supercooling in their influence on the technological properties
of X40 Cr 13 steel.
Swiss Association for the Study of Heat Treatment.
Heat treatment of machinery steels and of tool
steels, v.l. 138p. 1967. The Association, Zurich.
38 S.Fr.
Trinks, Willibald, and Matthew Holmes Mawhinney.
Industrial furnaces, v.2. Ed.4. 35Sp. 1967. Wiley,
New York. $17.
Government Publications
Combination of higli^temperature plastic deformation
and quench hardening, by M. G. Lozinskii and
others. 14p. 1966. CFSTI: N67-34047.
First published in Moscow. 1962.
49

Considerations on the annealing of irradiated pressure
vessel steel, by D. J. Seman and E. J. Pasierb. 12p.
Oct. 1965. CFSTI: WAPD-T-1834.
Dimensional changes resulting from the heat treatm
of EN 30B and NIMAR 125, by C. F. Noble. 29p.
Dec. 1966. College of Aeronautics, Department of
Production and Industrial Administration, Cranfield,
England. N67-3011L*
Heat treatment and properties of iron and steel, b
Thomas G. Digges and others. 48p. 1966. U. S. National
Bureau of Standards (Monograph no. 88).
GPO $0.35.
Pack carburization of iron under vacuum conditions
by George Charles Carter. 94p. July 1966. CFSTI:
N67-18598.
Dissertation.
Stress-grain size analysis of the brittle fracture transition
of steel, by R. W. Armstrong. 26p. Feb. 1967.
CFSTI: N67-30424; AD-651322.
Symposium On heat-treated steels for elevated temp
ature service, Sept. 19-20, 1966, New Orleans, La,held
as part of the 21st annual Petroleum-Mechanical
Engineering Conference. 177p. 1966. American
Society of Mechanical Engineers. New York. $8.50.
Vacuum heat treating of high-strength steel castin
. by Arthur Ayvazian. 22p. Aug. 1966. CFSTI:
N67-15332; AD-640 376.
JOINING
American Fonndrymen's Society. Welding of iron castings
(a test program). 27p. 1965. The Society, Des
Plaines, III. $2.00.
50

American Welding Society. Welding handbook, pt.5.
Applications. Ed.5. (1967?). Macmillan, London.
80s.
British Welding Research Association. Joint prepar
tions for fusion welding of steel. (1967?). The Association,
Cambridge, England. 12s.6d.
Ceuyk, Gerd van. Die Eigenscliaften des hochfrequenzgeschweissten
Spiralrohres. 78p. 1965. Technische
Hochschule, Aachen.
Dissertation. The physical properties of high frequency
welded pipe coils.
Hazlett, T. H. Fundamentals of friction welding. 22p.
1966. American Society for Metals. Metals Park,
Ohio.
Includes iron alloys.
Henning, Alfred H., and others. Widerstands-Stumpfschweissversuche
an kalt verfestigtem Stahl. 89p.
1966. Westdeutscher Verlag, Cologne. (Forschungsberichte
des Landes Nordrhein - Westialen, Nr.
1603). 67.80 DM.
Resistance butt welding tests on cold hardened steel.
Heme, Lorenz. comp. ABC fur Stahlschweisser. 34Sp.
1966. Deutscher Verlag fiir Schweisstechnik, Diisseldorf.
(Fachbuchreihc Schweisstechnik, Bd. 48).
19.50 DM.
ABC for steel welders.
Institute of Welding, Ltd. Handbook for welding design,
v.l Fundamentals. Ed.2. 250p. (1967). Pitman,
London. 52s 6d.
. Welding of BS 968: 1962 steel, ii, 69p. 1965.
The Institute, London. 21s.
Jackson, M. D. Welding methods and metallurgy; a
51

textbook of weUling technology, ix, 422p. 1967. Gritfin.
London. 64/-.
Leake. Kenneth, and Norman J. Henthorne. Welding
craft science. 160p. 1967. Cassell, London. 22/6.
Linnert, George E. Welding metallurgy; carbon and
alloy steels, v.2. Technology. Ed.3. xii, 674p. cl967.
American Welding Society, New York.
Lloyd, C. D., and others. Inertia welding dissimilar
metals. lOp. 1967. American Society for Metals,
Metals Park, Ohio. (ASM Technical report no.
W7-1.1).
Mendel, L. Manuel pratique de soudage a Tare. Ed.5,
208p. 1967. Dunod. Paris. 7.80 Fr. fr.
Practical manual of arc welding.
Patton, W. J. Science and practice of welding. 524p.
1967. Prentice-Hall, Englewood Cliffs, N. J. $12.
Resistance Welder Manufacturers' Association. Resistance
welding manual. 2v. n.d. The author, Philadelphia.
$5.
Shorshorov, M. Kh. Metallovedenie svarki stalii splavov
titana. 336p. 1965. Nauka, Moscow. 2R.16K.
The metallurgy of the welding of steel and titanium
alloys.
West, W. E. Fabricator looks at solid and composite
electrode gas metal arc welding. 9p. 1966. American
Society for Metals, Metals Park, Ohio. (ASM technical
report no. C6-23.2).
Wirtz, Heribert. Das Verhalten der Stable beim
Schtveissen. v.l. 265p. 1966. Deutscher Verlag fiir
Schweisstechnik, Dusseldorf. (Fachbuchreihe
Schweisstechnik, v.44). 34 DM.
Behavior of welded steel.
52

Government Publications
Adhesive bonding of stainless steels, by R. E. Keith,
and others. 64p. Feb. 1967. CFSTI: N67-28756.
Cold molecular welding study. Final report June 15,
1966-June 14, 1967, by C. Eugene Moeller and Michael
Noland. 15p. June 1967. CFSTI: N67-31501.
Experiments on the reliability of acoustical scale models.
Simple steels sections welded or glued, by P. C.
Williams. 29p. 1966. CFSTI: N67-10464.
Inter molecular bonding of various metals and alloys
by thermochemical vapor deposition. Final report,
Apr. 15, 1965-Oct. 31, 1966, by R. Wilson. 145p.
Nov. 1966. CFSTI: N67-13671; NASA-CR-80721.
Includes stainless steel alloys.
Investigation of pressure welding of A-55 commercially
pure titanium to type 303 stainless steel, by Clay
W. G. Fulcher. 71p. May 1959. CFSTI: AD-654 431.
Investigation of the reliability of prequalified fillet
welding procedures for welded steel bridges, by
Davis S. Berger and others. 45p. Sept. 1966. CFSTI:
PB 173 910.
Joining dissimilar metals by utilizing explosive welded
inserts, by Donald L. Gibson and Kenneth E. Yager.
49p. July 1965. CFSTI: NP-16491.
Literature review of the welding of 3% per cent and 9
per cent nickel steels, by M. B. Watson. 105p. Sept.
1966. CFSTI: AECL-2630.
Magnetic force welding applications at Bartelle Northwest,
by R. F. Boolen. ISp. May 1967. CFSTI:
BNWL-422; N67-34785.
53

NASA contributions to metals joining, by W. J. Reichenecker
and J. Heuschkel. 148p. 1967. GPO: NASA-
SP-5064. $0.60.
Permanent joining of stainless steel tubing by aut
nmtic fusion welding, by R. C. Baumann. 32p. Dec.
1966. General Dynamics/Convair, San Diego, Calif.
N67-27210.•
Polybenzimicadole structural adhesives for bonding
stainless steel, beryllium and titanium alloys. Technical
report, Feb.-May 1965, by Sidney Litvak. 43p.
Mar. I960. CFSTI: N67-21848; AD 645241.
Reactions of selected metal-metal couples at 1100°
by L. J. Kirby and H. T. Fullam. 20p. June 1967.
CFSTI: BNWL-421; N67-37472.
Strength of bonded single lap metal joints subject
to fatigue loading at room temperature and at
100"C, by W. Althof. 49p. Dec. 1966. CFSTI:
N67-27793.
Single lap joints of aluminum alloys and stainless steel
bonded with an epory-phenol adhesive subjected to fatigue
loading. Translated from German.
Study of dissimilar metal joining by solid state w
ing. Final report, by C. H. Crane and others. 199p.
Oct. 1966. CFSTI: N67-19274.
Study of the effects of various heat input rates o
steel welds, by S. W. Worden and others. 39p. Nov.
1966. CFSTI: N67-16541.
Techniques for hot-press-bonding dissimilar metal
combinations, by R. D. Watson. 20p. May 1966.
AECL: AECL-2583. $1. (Also available from
CFSTI).
54

Hot-press techniques used to join Zircaloy-2. stainless
steel, and mild steel to aluminum.
Tee drawing for tubular vacuum systems, by Hermann
M. Ruess and others. 34p. Mar. 1966. CFSTI: LA-
3517.
Fabrication procedures, tooling, and equipment for welded
tee connections for stainless steel tubing.
Thermal fatigue testing of selected dissimilar metal
welds, by B. D. Hackney, and others. 95p. Mar. 1966.
General Electric Co., San Jose, Calif. APED-4948/
Welded connection made from thick high-strength
steel; tests using fracture criteria based on new concepts
and the influence of strain rate. Quarterly report
no3, Apr.-June 1966. 126p. 1966. Oerlikon
Elektrodenfabrik Eisenberg, West Germany. CFSTI:
EURAEC-1712; N67-23589.
. Quarterly report no. 4, July 1-Sept. 30, 1966.
94p. 1966. CFSTI: EURAEC-1761; N67-25601.
Welded transition joints of 9 Cr-1 Mo alloy steet/
for short life (100 hours maximum) application, by
R. A. Mendelson. 24p. Feb. 1964. CFSTI: N67-
22841.
Welding of precipitation-hardening stainless steels, by
J. J. Vagi and others. 195p. Feb. 1967. Battelle Memorial
Institute, Columbus, Ohio. CFSTI: N67-
29176; AD-654 806.
Welding of stainless steels, by H. W. Mishler, and
others. 214p. Feb. 1967. Battelle Memorial Institute,
Columbus. Ohio. CFSTI: N67-29179; AD 654 805.
WeWing techniques for small capsules, by F. T. Ewa
and R. A. Carney. 6p. Sept. 1966. CFSTI: AERE-M-
1801. $0.50. (HMSO, 2s 6d).
55

Method originally developed for stainless steel. Also includes
Mo alloys and W.
CLEANING, COATING AND FINISHING
Bakhvalov, G. T, and A. V. Turkovskaya. Corrosion
and protection of metals. Ed. by G. Isserlis. 322p.
1965. Pergamon, Long Island City, N. Y. $17.50.
Bockris, J. O'M., and G. A. Razumney. Fundamental
aspects of electrocrystallization. 155p. 1967. Plenum,
New York. $7.50.
Burns, R. M., and W. W. Bradley. Protective coatin
for metals. Ed.3. 735p. 1967. Reinhold, New York.
(American Chemical Society Monograph no. 163).
$25.
Einsatz von kunststoffbeschichteten Blechen, Rohre
und Drahten. 50p. 1966. Vulkan-Verlag Dr. W. Classen,
Essen. 12.80 DM.
The use of plastics-coated metal sheets, tubes and wires.
A symposium held at Essen, Apr. 19, 1966.
Finishing handbook and directory, 1967, 644p. 1967.
Sawell Publications, London. 4Ss.
Includes finishing of wood and plastics, but has large
section on metals finishing.
Hot Dip Galvanizers Association. General galvanizing;
users guide and directory 1967. 40p. (1967?). The
Author, London.
. General galvanizing practice. 67p. 1966. The
Association, London. £2. 10s.
International Conference on Hot Dip Galvanizing
(7th) Paris, 1964, 524p. (1967). Pergamon, London.
$20.60.
International Lead Zinc Research Organization. Zin
56

for corrosion protection, pt.2. 30p. Apr. 1967. The
author. New York. (Ilzro digest no.19).
Isserlis, George, ed. Quality control in metal finishing.
118p. 1967. Columbine Press, Manchester, England.
$4.20.
Jahrbuch der Oberflachentechnik. v.23. 1967. 552p.
1966. Metall-Verlag, Berlin. 28.60 DM.
Surface technology yearbook, v.23, 1967.
Jahrbuch der Schleif- und Poliertechnik und der Oberflachenbehandlung,
1967. 456p. 1967. Vulkan-Verlag,
Essen. 24 DM.
Yearbook of grinding and polishing technique and surface
treatment.
Laubscher, A. N. New metallic coatings and treatments
for container steel surfaces. 20p. 1966. American
Society for Metals, Metals Park, Ohio. (Technical
report no. C6-8.2).
Metal finishing guidebook directory for 1967. v.35.
850p. 1966. Metals and Plastics Publications, Inc.,
Westwood, N. J. $2.50.
Nisbet, D. F. Cladding metlwds used by an oil company
for base metal protection. 12p. 1966. American
Society for Metals, Metals Park, Ohio. (ASM technical
report no. GG 6-1.9).
Raub, E. and K. Muller. Fundamentals of metal deposition,
viii. 268p. 1967. Elsevier, New York. $21.50.
Safranek, W. IL Design precepts for quality plating.
8p. 1967. American Society for Metals, Metals Park,
Ohio. (Report no. C7-15.2).
Samsonov, Grigorii V., ed. Diffusion cladding of metals,
x, 89p. 1967. Consultants Bureau, New York. $15.
57

Tenhaven, U. Ein Beitrag zur Untersuchung des Kathodischen
Schutzes von Zink auf Stahl. 49p. 1965.
Bergakademie, Clausthal.
Dissertation. Contribution to the investigation of the
cathodic protection of zinc on steel.
Wiederholt, Wilhelm. Chemical surface treatment of
metals. Ed. by William E. Cattley. 227p. 1965. Robert
Draper, Middlesex, England. $13.
Government Publications
Cesium deposition on stainless steel, by C. E. Milstead
and L. R. Zumwalt. 15p. Sept. 1966. CFSTI: GA-
7433; N67-23687.
Effects of surface preparation in tlte stress corr
cracking of stainless steel, by R. W. Cochran and
R. W. Staehle. 117p. Oct. 1966. CFSTI: COO-1319-
48; N67-29713.
Electrodeposition of thick coatings of platinum an
palladium on refractory metals from aqueous electrolytes,
by Stephen D. Cramer, and others. 64p.
Sept. 1967. U. S. Bureau of Mines, Washington, D.
C. (Report of Investigations no. 7016).
Hot-dip galvanizing. 14p. 1966. CFSTL PB 173 556.
Bibliography containing abstracts of 64 articles on hot-dip
galvanizing from publications of many countries.
Hydrogen embrittlement of steel in metal finishing
processes of black oxide and zinc phosphatize, by
Russell H. Wolff. 27p. June 1966. CFSTI: N67-
14711; AD-&40176.
New method of production of clad plate rolled products
for pressure vessels, by V. A. Lutsyuk-Khudin.
54p. July 1966. CFSTI: AD 654 787.
Edited machine translation of Navyi sposob proizvodstva
5S

tolatoliatovoio dvukhaloinoio prokata dlya aoaudor vysokogo
davleniya, Kiev. 1965.
Onderzoek naar de invloed van fosfateerbehandelingen
op het gedrag van verflagen op staal bij kathodische
bescherming. 21p. Apr. 1967. Metaalinstituut
TNO, Delft, Netherlands. N67-30794.*
Effects of cold phosphate treatment on the behavior of
paint coatings on steel protected by cathodic action.
Optimale condities voor het reinigen von stahlplaat
door stralen, by J. Remmelts. 21p. Apr. 1967.
CFSTL N67-34091.
Optimum conditions for blast cleaning of steel plate.
Prevention of significant embrittlement in certain types
of high-strength steels, prior to and during cadmium
electroplating, by J. Bednar and others. 5p. (1966).
Dept. of Energy, Mines and Resources, Extraction
Metallurgy Division, Mines Branch, Ottawa.
(RS-14). $0.25.
Speurwerk warm fosfateren, by M. J. Reidt. 15p. May
1967. CFSTI: N67-34120.
Investigation of hot phosphates for treating steel parts
prior to painting.
Stitdy of hydrogen embrittlement of various alloys.
Annual summary report, June 24, 1966-June 23,
1967, by T. P. Groeneveld. 83p. June 1967. CFSTI:
N67-32396.
Surface treatments for precipitation-hardenable stainless
steels, by A. M. Hall. 62p. Apr. 1967. Battelle
Memorial Institute. Columbus, Ohio. CFSTI: N67-
29177; AD-654 809.
Vergelijkend onderzoek van een aantal voorbehandelingen
van staal, dat wordt geschilderd. 27p. Jan.
59

1967. Verfinstituut TNO, Delft, Netherlands.
CFSTI: N67-26040.
Comparison of several methods for treating steel prior to
painting.
METALLOGRAPHY
Advances in electron metallography, v.6. A symposium
presented at the Sixty-eighth Annual Meeting (of
the) American Society for Testing and Materials
(at) Lafayette, Ind., June 13-18,1965. 5, 131p. 1966.
The Society, Philadelphia. (ASTM special technical
publication no.396). $7. (Members $4.90).
Advances in x-ray analysis, v.9; proceedings of the
fourteenth annual conference on applications of
x-ray analysis held August 25-27, 1965. ix, 544p.
1966. Plenum, New York. $22.50.
American Foundrymen's Society. Microstruciure of
ductile iron. 64p. 1965. The Society, Des Plaines, 111.
(Publication no.55). $8. (Members $4).
Barrett. Charles S.. and T. B. Massalski. Structur
metals. Ed.3. 654p. 1966. McGraw-Hill, New York.
$15.75.
Bokshtein, S. Z., and E. F. Trusovaya, eds. Fazovyi
sostav struktura i svoistva legirovannykh stalei i
sj>lavoa. 232p. 1965. Mashinostroenie, Moscow. 86K.
Phase composition, structure and properties of steels and
alloys.
Brammer, I. S., and M. A. P. Dewey. Specimen preparation
for electron metallography. HOp. 1966. American
Elsevier, New York. $6.
Brothers, A. J., and S. Yukawa. Engineering applic
tions of fractography. 26p. n.d. American Society for
Testing and Materials, Philadelphia. Pa. (Paper no.
45).
60

Butenuth, Edith. Elektronenbeugungs- und elektronenmikroskopische
Untersuchungen an naturlichen
und synthetischen Eisen(Ill)-oxiden verschiedener
Herkunft. 33p. 1965. Technische Hochschule,
Aachen.
Dissertation. Electron diffraction and electron microscope
analysis of natural and synthetic iron oxides of various
origin.
Fischmeister, H. F. Scanning methods in quantitative
metallography (counting, sizing, integration). 50p.
1966. Acta Polytechnica. Seandinavica, Stockholm.
(Chemistry including metallurgy series no. 56).
10 kr.
Freund, Hugo, ed. Applied ore microscopy. 6S3p. 1966.
Macmillan, New York. $8.40.
Friedel, Jacques. Dislocations. 491p. 1964. Paris
of Mines. $17.00.
Greaves, Richard Henry, and Harold Wrighton. Practical
microscopical metallography. 221p. 1967.
Barnes and Noble, New York. $6.75.
Greenwood, Geoffrey Wilson. Atomic processes in
metallurgy: inaugural lecture delivered 25 January,
1967. 25p. Oct. 1967. Sheffield University, Sheffield,
England. 1/-.
Henry, G., and J. Plateau. Microfractography; an i
troduction to the techniques and applications. Translated
from the French by B. Thomas. (1966). Metaux,
Saint-German-en-Laye, France. 345 fr.
Hornbogen, Erhard, and Hans Warlimont Metallkunde.
Eine kurze Einfuhrung in den Aufbau und
die Eigenschaften von Metallen und Legierungen.
200p. 1967. Springer-Verlag, New York. 26.40 DM.
61

Metallography. A brief introduction to the composition of
metals and alloys.
Institute of British Foundrymen. Typical microstructures
of cast metals. Ed.2, edited by G. Lambert.
274p. 1966. The Institute, London. 84s. American
Foundrymen's Society, Des Plaines, III. $11.75.
Metallurgical Society of AIME. Institute of Metals
Division. Chemistry and Physics of Metals Committee.
Local atomic arrangements studied by x-ray
diffraction; proceedings of a symposium held in Chicago,
Feb. 15, 1965, under the sponsorship of the
Chemistry and Physics of Metals Division, The Metallurgical
Society, American Institute of Mining,
Metallurgical, and Petroleum Engineers; edited by
Jerome Bernard Cohen and J. E. Hilliard. 381p.
1966. Gordon & Breach, New York. (Metallurgical
Society conference, v.36). $22.
Pearson, W. B. Handbook of lattice spacings and
structures of metals and alloys, v.2. 1446p. 1967.
Pergamon, Long Island City, N. Y. $75.00.
Reimer, Ludwig. Elektronenmikroskopische Untersuchungs-
und Praparationsmethoden. Ed.2. xii, 598p.
1967. Springer-Verlag, New York. 98 DM.
Electromicroscopic tests and preparation methods.
Smallman, R. E., and K. H. G. Ashbee. Modern metallography,
ix. 21 lp. 1966. Pergamon, New York. $3.25.
Warke, W. R., and others. Techniques for electron
microscope fractography. 25p. n.d. American Society
for Testing and Materials, Philadelphia, Pa.
Weidermann, Wolfgang. Zur Versetzungsstruktur von
plastisch verformtem a-Eisen. 89p. 1966. Technische
Hochschule, Aachen.
On dislocation structure of plastically deformed alpha iron.
62

Government Publications
Advances in metallography, by Ross J. Jackson and
Art E. Calabra, eds. 225p. Oct. 1966. CFSTI: N67-
24241.
Twelfth Metallographic Conference, held in Denver. May
18-20, 1966.
Applications of a portable radioisotope x-ray fluorescence
spectrometer to analysis of minerals and alloys,
by J. R. Rhodes and T. Furuta. 61p. July 1967.
CFSTL ORO-3224-11.
Crystal morphology and mechanism of growth of « -
FerOj blade-like platelets on iron, by Richard L.
Tallman and Earl A. Gulbransen. 27p. Dec. 1966.
CFSTI: N67-25402.
Deformation twinning in Ni and F.C.C. Fe-Ni alloys,
by R. P. Reed. 5p. Jan. 1967. CFSTI: PB-175 619.
Electron microscope investigation of the high-temperature
embrittlement of irradiated stainless steel,
by G. J. C. Carpenter and others. 40p. 1966. CFSTI:
N67-12700.
Electron microscopic examination of high power density
stainless steel cladding, by U. E. Wolff and
others. 27p. Jan. 1966. CFSTI: GEAP-5003.
Electron microscopic study of maraging steel, by I
Cheng. 44p. Jan. 1967. CFSTI: UCRL-17334; N67-
35853.
Dissertation.
Metallography (collection of articles). 463p. May
1960. CFSTI: AD-649 486.
Translated from Melallovedcniya, Sbornik Statey 2, Sudpromgiz.
Mossbauer study of hydrogen diffused in iron and
63

steels, by Michael Bielefeld. 6p. 1967. CFSTI: N67-
31353.
On the existence of cubic iron-carbon martensite, by
N. N. Breyer and E. S. Nachtman. 27p. Dec. 1966.
CFSTI: AD 651 991; N67-32990.
Phase composition, structure, and properties of alloy
steels and alloys. (Selected articles). 59p. Aug. 1966.
CFSTI: AD-644 036.
Translation of Fazovyi soslav, siruktura, i aovoiatva legirovannykh
slaldi i splavov, Moscow, 1965.
Phase studies of the uranium-iron-aluminum ternary
system with the electron microprobe, by R. G.
Schierding and L. A. Fergason. 20p. Aug. 1966.
CFSTI: MCW-1503; N67-20214.
Present status of metallography, by R. J. Gray. 76p.
July 1967. CFSTI: ORNL-TM-1733.
From American Society for Testing and Materials 69th
Annual Meeting, Atlantic City, N. J.
Simplified metallographic techniques for uranium alloys
and other metals, by Ross J. Jackson, and others.
12p. Jan. 1967. CFSTI: N67-24551.
Simplified X-ray analysis of retained austenite, by H.
R. Erard. 52p. 1964. CFSTI: AD 451 253.
TRANSFORMATIONS AND RESULTING STRUCTURES
American Society for Metals. Recrystallization, grain
growth and textures; papers presented at a seminar
of the American Society for Metals, Oct. 16-17,
1965. 617p. 1966. The Society, Metals Park, Ohio.
$24.
Battelle Memorial Institute. Materials Science Col
quia (1st), 1966, Geneva and Villars. Phase stability
in metals and alloys; (proceedings of tlte) Battelle
64

Institute Materials Science Colloquia, Geneva and
Villars. Sioitzerland, March 7-12, 1966. xiv, 594p.
1967. McGraw-Hill, New York. $21.50.
Brinker, Manfred. Untersuchungen des Umwandlungsverltaltens
von Eisen-Mangan-Legierungen durch
Dampfungemessungen im Hertzbereich. 54p. 1965.
Technische Hochschule, Aachen.
Dissertation. Investigations on the transformation changes
of iron-manganese alloys during damping capacity measurement
in cycle frequencies.
Irani, J. J. Structural changes occurring during isoforming.
(Deformation during isothermal transformation
to pearlite). 1966. British Iron and Steel Research
Association, London. (REP/29/66).
Irani, J. J., and O. Dulieu. Morphology and identity of
pliases formed in austenitic steels containing tantalum.
1966. British Iron and Steel Research Association,
London. (REP/30/66).
Rademacher, Leo. Austenitzerfall und Karbidbildung
warmfester Stalile im Temperaturbereich der Perlitstufe.
145p. 1966. Technische Hochschule, Aachen.
Dissertation. Austenite decomposition and carbide formation
heat resistant steel in pearlite stages.
Vogt, Klaus. Beitrag zur Kenntnis der isothermen Martensitbildung
in Fe-Mn-C-Legierungen. 42p. 1965.
Technische Hochschule. Aachen.
Dissertation. A contribution to the knowledge of isothermal
martensite formation in Fe-Mn-C-alloys.
Government Publications
Accommodation faulting in Fe-Ni martensitic transformation,
by R. P. Reed. 3p. 1966. CFSTI: PB-
173 791.
Austenitization of Wel-Monix steel. Study no. 1018.
65

8p. June 1966. Chantiers de 1' Atlantique Saint-Nazaire,
France. CFSTI: EURAEC-1711; N67-28215.
Dislocation mobility and multiplication during str
ageing of iron, by Y. Bergstroem and O. Vingsbo.
25p. Apr. 1967. Uppsala University. Institute of Physics,
Sweden. Dep: UUIP-528.
Effect of thermal history on composition changes and
hardness in a maraging steel, by Alfred Goldberg.
35p. Mar. 1967. CFSTI: UCRL-50207.
Effects of irradiation, coUl work, and annealing on the
martensite content of two austenitic stainless steels,
by J. W. Carter. 22p. Aug. 1966. CFSTI: N67-16384.
Equation of state for iron assuming an instantaneo
phase change, by Charles L. Mader. 20p. Dec. 1966.
CFSTI: N67-21154; La-3599.
Interface motion in displacive phase transformations.
Final report, 1962-1967, by R. F. Hehemann. 17p.
Julv 1967. Case Institute of Technology, Department
of Metallurgy, Cleveland, Ohio. N67-35941."
Microstructure and properties of metastable austen
high-strength steels, by John S. Dunning. 42p. Dec.
19*36. CFSTI: UCRL-17215.
Dissertation.
Plotting of 1.2 MD 0.7 steel transformation curves for
austenitization temperatures of 900° and 1100"C.
Special report no. 16, Apr. 1-June 30, 1966. 9p. June
1966. Chantiers de 1' Atlantique Penhoet-Loire, Paris.
CFSTI: EURAEC-16S7; N67-39046.
Solidification of iron base alloys at large degrees of
undercooling. Interim report no. 1, Oct. 1 1965-
Sept. 30, 1966, by T. Z. Kattamis, and M. CElem-
66

ings. 80p. Sept. 1966. Massachusetts Institute of
Technology, Dept. of Metallurgy. Cambridge, Mass.
CFSTI: AD-654 769; N67-35355.
Structure and growth of Widmanstaetten ferrite and
bainite, by J. M. Oblak and R. F. Hehemann. 57p.
Feb. 1967. CFSTI: N67-24955; AD-647298.
Study of the austenitic grain growth of five steels under
the influence of heat cycles simulating vertical
slag welding conditions. Special report no.ll, Jan.
J-Mar. 31,1966.15p. (1966). Chantiers de 1' Atlantique
Saint-Nazaire, France. CFSTI: EURAEC-1648.
. Special report. Apr. 1-June 30, 1966. 20p. Juno
1966. EURAEC-1668; N67-23184."
Transformation kinetics, microplasticity and aging of
martensite in Fe-31Nt. Final technical report, by
Christopher L. Magee and Harold W. Paxton. 309p.
Sept. 1966. CFSTI: N67-15975; AD-61142S.
Dissertation.
PHYSICAL AND MECHANICAL PROPERTIES
American Society for Testing and Materials. References
on fatigue, 1964. iv, 97p. 1967. The Society,
Philadelphia, Pa. (ASTM special technical publication
no.9-o). $7.50. (Members $5.25).
Baikov, A. A., and I. M. Pavlov, eds. Napryazhennoe
sostoyanie i plastichnost' pri deformirovanii metallov.
204p. 1966. Nauka, Moscow. 1R 27K.
Stress state and plasticity in the deformation of metals.
Baikov, A. A., and others, eds. Vnutrennee trenie v
metallkh i splavakh. 243p. 1966. Nauka, Moscow.
1R. 56K.
Internal friction in metals and alloys.
Behrcns, Hubertus. Untersuchungen uber das Slreckgrenzenund
Sprodbruchverhalten von niedriglegier-
67

ten Baustahlen in Abhangigkeit von Korngrosse,
Temperatur, V'orverfestigung und Atterung. 102p.
1965. Technische Hochschule, Aachen.
Dissertation. Research on the yield strength and brittle
fracture of low alloy structural steels in relation to grain
size, temperature, strain hardening and aging.
Bluhm, Peter. Der nichtmagnetisierbare Stahl und
seine Anwendung. 185p. 1967. Decker, Hamburg.
38 DM.
Non-magnetic steel and its applications.
British Iron and Steel Research Association, and Iron
and Steel Institute. Joint conference on high temperature
properties of steels, 1966, Eastbourne, vii,
612p. 1967. Iron and Steel Institute, London. (Publication
no.97). £12.
Bucher, J. II. and Grozier, J. D. Toughness of high
strength Iwt rolled steels. 20p. 1965. American Society
for Metals, Metals Park, Ohio. (Tech. Rept. no.
D5-11.4).
Cammett, J. and others. Residual strains and displacements
within the plastic zone altead of a crack. 16p.
1966. National Research Council, Washington, D. C.
Christian, Jack L. Problems, properties and selection
of structural metals for use in cryogenic environment.
19p. 1967. American Society for Metals, Metals
Park, Ohio. (ASM Technical report no. W7-6.1).
El Abd, Talaat. VcrJialten von aufgestickten, nach verscheidcnen
Verfahren hergestellten Sonderstahlen
im Hinblick auf Schmeidbarkeit, Korrosionsbestandigkeit
und mechanisch-technologische Eigenschaftcn.
53p. 1967. Technische Hochschule, Aachen.
Dissertation. Results of nitriding special steels produced
by various methods in regard to malleability, corrosion resistance
and mechanical-technological properties.
OS

Garofalo, Frank. Fundamentals of creep and creeprupture
in metals. 258p. (1967). Collier-MacmUlan,
London. 70s.
Gleich, Dietrich. Uber das Festigkeits verhalten v
gegossenen Hohlwalzen. 174p. 1966. Technische
Hochschule Stuttgart.
Dissertation. Strength behavior of cast cylinders.
Coel. V. S., and others. Effects of biaxial strain on material
properties. 16p. 1967. American Society for
Metals, Metals Park, Ohio. (Technical report no.
C7-13.4).
Greenberg, H. D., ed. Application of fracture toughness
parameters to structural metals, x, 406p. 1966.
Blackie and Son, London. 200s.
Grigull, Ulrich. Technische Thermodynamic 171p.
1966. deGruyter, Berlin (Sammlung Gbschen, v.
1084/1084a).5.80DM.
Technical thermodynamics. (Metallurgy of iron).
Heck, Carl. Magnelische Werkstoffe und ihre technische
Anwendung. 71 lp. 1967. Huthig, Heidelberg.
108 DM.
Magnetic materials and their technical applications.
Hydrean, P. P., and others. Properties of nickel-molybdenum-aluminum
age hardening steels. 20p. 1967.
American Society for Metals, Metals Park, Ohio.
(ASM Technical report no. C7-4.5).
International conference on fracture (1st), Sendai,
tember 12-17, 1965. Proceedings. 3v. 1966. Japanese
Society for Strength and Fracture of Materials, Sendai.
$25.
Irani, J. J. Application of thermomedianical treatments
69

to steels. 38p. 1967. British Iron and Steel Research
Association, London. (Report no. MG/A/60/67).
Irani. J. J., and P. R. Taylor. Effect of thermomechanical
treatments on the properties and structures of
alloy steels. (1966). British Iron and Steel Research
Association, London. (MG/E/185/66).
Ivanova, Vera Sememovna, ed. Role of dislocations in
the strengthening and failure of metals; translated
from the Russian by J. E. Baker. 2v. 1967. National
Lending Library for Science and Technology, Boston
Spa, England. 13/6 each volume.
Originally published as Rol' dislokatsii v uprochnenii i
razrushenii me'Iallov.
Kachanov, Lazar' Markovich. Tfieory of creep. 2v.
1967. National Lending Library for Science and
Technology, Boston Spa, England, v.l, 24/-. v.2,
26/-.
Originally published as Teoriia polzuchesti. Moscow, 1960.
Knof. Hans. Thermodynamics of irreversible processes
in liquid metals. 12, 95p. 1966. Hevwood. London.
25s.
Kochendorfer, Albert. Physikalische Grundlagen der
Formaiulerungsfestigkeit der MetaUe. Erganzung
1966. 1967. Verlag-Stahleisen, Diisseldorf. 7.80 DM.
Physical principles of the mean tensile strength of metals.
Lagneborg. R. Yielding and fracture of Fe-30% Cr alloys
subjected to 475"C-embrittlement. 40p. 1967.
Acta Polytechnica Scandinavica. Stockholm. (Chemistry
including metallurgy series no. 62). 10 kr.
Lamvermeyer, D. J., and C. W. Funk. Failure analysis
of a gaseous hydrogen heat cxclianger-liquid metal
embrittlement. lOp. 1966. American Society for
Metals, Metals Park, Ohio. (ASM technical report
no. GG6-1.2).
70

Embrittlement of AISI 321 stainless steel by molten Zn
exposed to service temperature in the 900° to 1200°F. range.
Mann, J. Y. Fatigue of materials, xv, 155p. Melbourne
University Press, Melbourne. $2.60.
Manson, S. S. Thermal stress and low-cycle fatigue, xi,
404p. 1966. McGraw-Hill, New York. $16.50.
Mason, Warren P., ed. Physical acoustics; principles
and methods. vJ, pt.A. The effect of imperfections.
512p. 1966. Academic Press, New York. $18.50.
Includes iron and steel.
O'Neill, Hugh. Hardness measurement of metals and
alloys. Ed.2. 238p. 1967. Barnes and Noble, New
York. $11.
Pellissier, G. E., and others. Fractographic analysis of
the relationships between fracture toughness and
surface topography in ultrahigh-strength steels. 25p.
n.d. American Society for Testing and Materials,
Philadelphia. Pa. (Paper no.39).
Purdue University. Thermophysical Properties Research
Center. Tliermophysical properties of Jiigh
temperature solid materials, v.3. Ferrous alloys, edited
by Y. S. Touloukian. 593p. 1967. Macmillan,
New York. $60.
Raymond. L., and Kendall, E. G. Failure analysis of
high strength stainless steels in space launch vehicles.
14p. 1966. American Society for Metals, Metals
Park. Ohio. (ASM technical report no. GG
6-1.8).
Riedel, J. Y. Analysis of tool and die failures. 16p. 1967.
American Society for Metals, Metals Park, Ohio.
Sokolov, A. V. Optical properties of metals, xvii, 472p.
1967. American Elsevier, New York. $22.75.
71

Stoloff, N. S., and R. G. Davtes. Mechanical properties
of ordered alloys, iii, 86p. 1966. Pergamon, Long Island
City, N. Y. (Progress in materials science, v.13,
no.l). $4.
Taylor P. R. and G. Hoyle. Improvement in mechanical
properties by thermo-meohanical treatment and
its application to tool materials. 9p. 1965. British
Iron and Steel Research Association, London.
(BISRA report no. MG/E/172/65).
Tetclman, A. S., and A. J. McEvily, Jr. Fracture of
structural materials. 697p. 1967. Wiley, New York.
$17.95.
Van Echo, John A., and Ward F. Simmons. Supplemental
report on the elevated-temperature properties
of chromium-molybdenum steels. 66p. 1966.
American Society for Testing and Materials, Philadelphia.
(ASTM data series no. DS 6 SI). $2.25
Van Echo, John A., and others. Short-time tensile and
long-time creep-rupture properties of the HF and
HH alloys. 36p. American Society for Testing and
Materials, Philadelphia, Pa.
Varga, Tamas Gybrgy. Beitrag zur Kerbschlagprufung
von Baustahlen. 112p. 1966. Eidgenossiche Technische
Hochschule. Zurich.
Dissertation. The role of the notch impact-bending test in
structural steels.
Zeuncr, Hans. Warmfeste Gusswerkstoffe. 59p. 1967.
Zentrale fiir Cussverwendung, Dusseldorf. (Schriftenreihe
Cuss und seine Vcrwendung. H. 11). 2 DM.
Heat-resisting cast materials.
Government Publications
Applications of fracture mechanics in evaluating the
initiation and propagation of brittle fracture in re-
72

actor structural components, by R. G. Hoagland,
and others. 30p. Mar. 1966. CFSTI: BNWL-SA-377.
Axial fatigue of pre-and post-irradiated A302 and
A2I2B steels, by C. R. Brinkman and J. M. Beeston.
35p. Jan. 1967. CFSTI: IN-1052; N67-25437.
Characterization of fatigue-crack growth by stress
wave emission. Final report, by C. E. Hartbower
and others. 105p. June 1966. CFSTI: N67-19864.
Comparative ductility of brittle metals by a preci
elongation technique, by Edward P. Patterson. 17p.
Dec. 1966. CFSTI: BDX-613-92.
Control of cast grain size of steel castings—effec
structure and nonmetallics on properties. Interim report,
Oct. 1, 1965-Sept. 1966, by Peter F. Wieser and
John F. Wallace. CFSTL AD 656 476.
Crack propagation, delayed failure, and residual s
strength of titanium, aluminum, and stainless steel
alloys in aqueous environments, by I. E. Figge and
C. Michael Hudson. 42p. Feb. 1967. U. S. National
Aeronautics and Space Administration. CFSTL
NASA-TN-D-3S25. $2.
Detection of fatigue using ultrasonic surface wave
N. E. Dixon. 22p. (1967). CFSTL BNWL-SA-940.
From the 6th Symposium on Nondestructive Testing, San
Antonio, Tex.
Determination of the emissivity of materials. Semi
nual progress report, Nov. 15, 1965-May 14, 196V5,
by W. L. Luoma and W. J. Walek. 83p. June 1966.
Pratt and Whitney aircraft, East Hartford, Conn.
PWA-2877; NASA-CR-72058.*
73

Determining the dynamic elastic modulus at elevated
temperatures using rapid heating techniques, by A.
L. Austin and R. Parker. 22p. Dec. 1965. CFSTI:
UCRL-14570.
Development and evaluation of magnetic and electri
cal materials capable of operating in the 800° to
1600"F. temperature range. Quarterly report no. 5,
Dec. 1, 1965-Feb. 28, 1966, by P. E. Kueser and
others. 263p. Mar. 1966. Westinghouse Electric
Corp., Aerospace Electrical Div. Lima, Ohio.
NASA-CR-54358.'
. Quarterly report no. 6, Mar. 1-May 31, 1966.
175p. June 1966. NASA-CR-54359.#
Effect of drilled holes on notch toitghness, by Ch
Alfred Ran. Jr. 267p. Apr. 1967. CFSTL N67-26455.
Effect of high temperature sodium on austenitic an
ferritic steels. Mechanical properties of materials.
Quarterly progress report, Apr.-June, 1966, by R. C.
Andrews and K. R. Barker. 66p. Julv 1966. MSA Research
Corp.. Evans City, Pa. CFSTI: N67-14684.
. Quarterly progress report, July-Sept. 1966.
30p. Oct. 1966. CFSTI: MSAR-66-220; N67-21786.
Quarterly progress report, Oct.-Dec. 1966, 22p.
Feb. 1966. CFSTL MSAR-67-17.
-. Topical report no. 7. Design properties of one
heat of 2% Cr-lMo steel and 316 stainless steel in
high temperature air, helium and sodium environments,
by R. C. Andrews and L. H. Kirschler. 78p.
Sept. 1966. CFSTI: MSAR-66-174; N67-17883.
-. Topical report no. 8. Results of mechanical
properties tests of 304 (stainless steel) specimens
conducted in: 1. 1200°F. sodium contaminated
74

with oxygen (**300ppm); 2. 1200"F. sodium contaminated
with carbon, by R. C. Andrews and
others. 168p. July 1967. CFSTL MSAR-67-103.
Effect of intermediate conditioning in the process
steel fatigue on steel durability, by L. A. Glickman
and V. P. Tekht. 12p. Feb. 1967. CFSTI: AD-
658 879.
Translated from the Russian.
Effect of mold-steel interface reactions on castin
face and properties. Final report July 1, 1965-Sept.
30, 1966, by Rodney L. Naro and John F. Wallace.
73p. May 1967. CFSTI: AD-656 475; N67-36745.
Effect of nitrogen on the mechanical properties of
neutron irradiated pure iron, by M. Castagna. and
others. 32p. 1966. CFSTI: EURAEC-1472.
From 3rd International Symposium on the Effects of Irradiation
on Structural Metals. Atlantic City.
Effect of nitrogen on the mechanical properties of
neutron irradiated pure iron, by A. Ferro. and
others. 34p. 1966. Societa Ricerche Impianti Nucleari.
Ccntro Ricerche Nucleari, Saluggia, Italy.
N67-30096.*
Effect of pre-straining on the tensile properties
stainless steel EN 58 B at 20°C and —196° C, by P.
Midgley. 26p. Apr. 1966. CFSTI: N67-14126.
Effect of strain rate on the yield stress of struc
steels, by N. R. Nagarajo Rao and others. 23p. 1966.
CFSTL PB 173 413.
Effect of stress state on flow and fracture of sev
high-strength alloys, by Maurice Zaslawsky. 38p.
April 1966. CFSTI: UCRL 14863.
75

Effect of stress system on the workability of metals,
by D. J. Latham and M. G. Cockcroft. 60p. Feb.
1966. CFSTI: N67-26199.
Effect of surface reactions on fatigue failure. Fi
port, by T. R. Shives and J. A. Bennett. 18p. 1967.
CFSTI: N67-19962.
Effect of temperature step during fatigue testing of
L65 aluminum alloy and a carbon manganese steel,
by A. A. Beveridge and M. Ormiston. 36p. Mar.
1966. CFSTI: N67-22129.
Effect of titanium additions on the stress-rupture properties
of type 304 stainless steel, by E. E. Bloom.
24p. June 1967. CFSTI: ORNL-TM-1807; N67-
36293.
Effect of uranium on the transverse ductility of resulphurized
chromium stainless steel rolled plate, by
W. M. Crawford. 40p. July 1966. Department of
Mines and Technical Surveys, Mines Branch. Ottawa.
(Technical bulletin no. R179). $0.75.
Effects of rare-earth additions on plain-carbon st
by P. G. Barnard. 29p. 1967. U. S. Bureau of Mines,
Pittsburgh, Pa. (Report of investigations no. 6907).
CFSTI: N67-23446.
Effects of shot peening on the fatigue properties of
damaged bare and damaged chrome plated high
strength 4340 steel, by Joseph Viglione. 54p. July
1965. CFSTI: AD-470 417.
Einfluss unterschiedlich hoher und haeufiger Vorbe
tastungen auf die Schwingfestigkeit gebohrter
Flachstaebe aus ST 37. Teil A: Woehlerversuche,
by H. Ostermann and W. Schuetz. 106p. 1964.
CFSTI: N67-26192.
76

Effect of prestressea of varying magnitude and frequency
on the fatigue strength of drilled flat bars of mild steel
(ST 37). Part A: S-N tests.
Etude du frottenment interieur d' alliages feraluminium
a forte teneur en aluminium, by Jacques Hillairet,
and others. 35p. 1966. Commissariat a l'Energie
Atomique. Centre d' Etudes Nucleaires, Saclay,
France. N67-33226.0
Internal friction in iron-aluminum alloys having a high
aluminum content. Summary in English.
Etude du metal de base destine a une recherche sur la
rupture fragile des gros assemblages sondes. 52p.
May 1967. Institut de Recherches de la Siderurgie,
Saint-Germain-en-Laye, France. N67-35274.0
Study of base metal for research on brittle fracture in
large weldments.
Evaluation of the serviceability of the Elk River Reactor
pressure vessel. Quarterly report, July 1-Sept.
30, 1966, by C. E. Lautzenheiser and E. B. Norris.
33p. Oct. 1966. Southwest Research Institute, San
Antonio, Tex. CFSTI: SWRI-1228P4-25.
Determination of the effects of neutrons on the nilductility
transition temperature and fatigue of pressure vessel steels
(A-302-B, A-105-II, and A-212-B steels).
Experimental developments in low-cycle fatigue research
on pressure vessel steels at elevated temperatures,
by T. Slot. 26p. June 1966. CFSTL CONF-
660 647-1.
Fatigue apparatus for use in studies of crack propagation
and dislocation morphology in fatigue. Technical
report no. 3, by Thomas B. Wade. 81p. Jan.
1967. Northwestern University, Dept. of Materials
Science, Evanston, 111. NP-16743.°
77

Fatigue crack growth rates in unirradiated pressure
vessel steel, by E. E. Baldwin and D. F. Mowbray.
18p. CFSTI: KAPL-P-3362.
Fatigue crack propagation in low-carbon steels, by
D. F. Mobrary. 9p. 1966. CFSTL N67-10712; T1D-
23138.
Fatigue of hydraulic tubing, by J. E. Hall. 73p. 1
CFSTL N67-26216.
Fatigue of metals—where it stands today, by J. Y.
Mann. 42p. Mar. 1966. CFSTI: N67-35135.
Fatigue of plates and weldments in HY-100 and HY-
130/150 steels, by W. II. Munse and others. 121p.
Nov. 1965. CFSTI: AD-480 198.
Fatigue of structural elements. Study of residual
stresses in linearly varying biaxial stress fields, by
H. V. Cordiano and V. L. Salemo. 63p. Apr. 1967.
CFSTI: AD-653 068.
The measurement of residual stresses in tee fillet welds in
\Vi in. HY-80 steel.
Fatigue on large scale uniformly loaded simply sup
ported tee-fillet welded rectangular rib-stiffened
plates, by M. Rosen. ISp. Mar. 1967. CFSTI: N67-
27180.
Fatigue end crack growth data of specimen (56 by 28 by
\Vi in.) fabricated from HY-80 steel.
Fatigue properties of irradiated pressure vessel steels,
by W. C. Gibbons and others. 46p. 1966. CFSTI:
N67-13379; WAPD-T-1S64.
Ferromagnetic resonance of He3-irradiated thin met
films, by Glen C. Bailey, and others. 25p. June 1967.
CFSTI: AD-655 234.
78

Fracture toughness of reactor pressure vessel steels.
Development of test procedures, June 1 to July 31,
1966, by E. J. Ripling and Phillip Crosley. 8p. Aug.
1966. Materials Research Laboratory, Inc., Richton
Park, III. CFSTL COO-1477-5; N67-14096.
. Progress report, Aug. 1-Oct. 31, 1966. 14p.
Nov. 1966. CFSTI: COO-1477-6; N67-216S8.
. Progress report, Nov. 1, 1966-Jan. 31, 1967.
12p. Mar. 1967. CFSTL COO-1477-7; N67-32909.
Progress report, Feb. 1-Apr. 30, 1967, 14p.
May 1967. CFSTL COO-1477-J
Het bepalen van de Charpy-V kerfslagwaarden van
stolen staafjes volgens het NATO - voor - schrlft
STANAG 4020, by L. D. B. van don Burg. 18p. Jan.
1967. CFSTI: N67-26024.
Charpy V notch impact data for steel bars obtained according
to NATO regulation STANAG 4020.
High temperature tensile properties of unirradiated
and neutron irradiated 20 Cr-35 Ni austenitic steel,
by R. B. Roy and B. Solly. 26p. Dec. 1966. CFSTI:
N67-22957.
Inelastic buckling strength of fabricated HY-80 steel
hemispherical shells, by Malcolm G. Costelle and
Kanehiro Nishida. 50p. Apr. 1967. Naval Ship Research
and Development Center, Washington, D. C.
N67-37188.*
Influence of boron on the creep-rupture properties of
a netUron irradiated precipitation hardening iron
base alloy, by J. Moteff and others. 62p. 1966.
CFSTI: CONF-660627-14; N67-29712.
Influence of chemical contouring on the fatigue an
sustained load properties of high tensile steel sheet.
. 29p. May 1964. CFSTI: N67-22798.
79

Influence of hydrogen on the mechanical properties of
Cliarpy V-notch specimens of low carbon steel, by
Arnaud P. Fayet, 54p. Sept. 1966. CFSTI: AD.643
944; N67-21699.
Dissertation.
Influence of tempering, prestraining, and retempering
on the strength and toughness of higlt-strength 4340
steel, by Eugene Dicesare. 29p. Aug. 1967. CFSTI:
AD-659 003.
Influence of thermal and strain cycling on fracture
susceptibility of mild steel, by J. F. Kiefner and W,
H. Munse. 131p. Feb. 1967. CFSTI: AD 647 906;
N67-26S90.
Investigation of embrittlement of reactor vessel steels
through plastic fatigue. Quarterly report no. 10,
Apr. 1-June 30, 1966. 22p. Dec. 1966. Centre National
de Recherches Metallurgiques, Liege, Belgium.
CFSTL EURAEC-1799; N67-33838.
Investigation of fracture in connection with hot deformation
processing of metals. Final report, by Nicholas
J. Grant, and others. 29p. Dec. 1966. Massachusetts
Institute of Technology, Cambridge, Mass.
CFSTI: AD-648 451.
Investigation of phenomenon of superplasticity in
metals. Final report, by Volkcr Weiss and others.
102p. Oct. 1966. Syracuse University Research Institute,
Department of Chemical Engineering and
Metallurgy. New York. CFSTL AD-S07 264.
Investigation of the effect of surface conditions
radiant properties of metals, pt. II. Measurements on
roughened platinum and oxidized stainless steel.
Technical report no. 1, Jan. 1-Sept. 15, 1966, by R.
80

W. Rolling and A. I. Funai. 264p. Apr. 1967. Lockheed
Missiles and Space Co., Lockheed Palo Alto
Research Laboratory, Palo Alto, Calif. CFSTI: AD-
655 384.
/ninstigation of the effects of solute elements on
magnetoelastic damping and coercivity in very pure
iron. Final report, by R. E. Maringer. 24p. Feb.
1967. CFSTL N67-24917; AD-646 513.
Literature survey on the fatigue properties of wel
chromium-molybdenum steel tubing, by R. Simpson.
49p. Mar. 1966. Aeronautical Research Laboratories,
Melbourne, Australia. N67-34620.0
Loiv-cycle fatigue strength reduction in notched flat
plates, by E. Krempl. 32p. Jan. 1967. CFSTI: GEAP-
5410.
Low endurance fatigue behavior of 20/25/NB stainless
steel at 25\ 650° and 750°C, by G. Sumner.
22p. 1966. CFSTI: N67-12831.
Lubrication of bearing steels with electroplated gold
under heavy loads. Technical report Jan.-Sept. 1966,
by Riitsu Takagi and Tung Lui. 23p. Mar. 1967.
CFSTI: N67-33572; AD-653 974.
Magnetic properties of thin films of nickel-iron-molybdenum,
by Guy H. Frindell. 58p. May 1966. CFSTI:
AD-641 180.
Material properties handbook, v.4. Heat resisting alloys.
261p. May 1966. Advisory Group for Aerospace
Research and Development, Paris, France. CFSTI:
NP-16411 (v.4).
Materials covered in this volume are heat-resisting alloys
of Fe. Ni and Co base. The data are divided into national
sections (French, German. United Kingdom and United
States).
81

Materials in electromagnets and their properties, by H.
Brechna. 47p. June 1967. CFSTI: SLAC-PUB-320;
N67-39255.
Mechanical behavior of heat-treated A1SI 4340 stee
under biaxial stress and rapid heating, by C. W.
Austin, Jr. 55p. Sept. 1964. CFSTI: AD-453 415.
Mechanical characteristics of austenitic steels. Q
ly report no. 7, April-June 1966. Compagnie des
Ateliers et Forges de la Loire, Paris, France. 76p.
1966. CFSTI: EURAEC-1783; N67-34140.
Mechanical properties and fracture surface topogra
of a thermally embrittled steel, by Frank II Can
and others. 36p. Sept. 1966. Army Materials Research
Agency, Watertown, Mass. (AMRA-TR-66-
28). CFSTI: AD-643 082.
Mechanical properties of a high-manganese, low-car
bon steel for welded heavy-section ship plate. Progress
report, by R. D. Stout and C. R. Roper, Jr. 27p.
Aug. 1967. Lehigh University, Bethlehem, Pa.
CFSTI: AD-637 211.
Mechanical properties of 9% Cr, 1% Mo (9M) steel a
by Carlos J. Romero. 43p. May 1963. CFSTI: N67-
22893.
Mechanical properties of steels. Quarterly report
Jan.-Mar. 1966. 125p. 1966. Compagnie des Ateliers
et Forges de la Loire. Department des Recherches,
Paris. (EUR-2843). CFSTL EURAEC-1645.
Mechanism of hydrogen embrittlement in steel, by A
S. Tetelman. 63p. July 1967. CFSTI: N67-30934.
Mechanisms of environment induced subcritical flaw
82

growth in AISI 4340 steel, by William Alan Van Der
Sluys. 47p. Sept. 1966. CFSTL N67-25185.
Metallurgical characteristics of high strength structural
materials. Quarterly report no. 10, Dec. 1965-
Mar. 1966, by R. J. Goode and others. 104p. Apr.
1966. Naval Research Laboratory, Washington, D.
C. (NRL-6454). CFSTI: AD-641262.
. Quarterly report no. 11, Apr.-June 1966, by P.
P. Puzak and others. 91p. Aug. 1966. CFSTI: NRL-
6513; N67-24914.
Methods for minimizing the embrittling effect of h
drogen in electroplated high strength alloy steel
items, bv Edward E. Dougherty. 37p. Mar. 1963.
CFSTL AD 653 156.
Metlwds of improving the heat-resistant properties
materials, by I. A. Oding and P. V. Zubarev. lOp.
Aug. 1966. CFSTI: N67-19823; AD-643726.
Translated from Russian. Includes steels and alloys.
Notched properties of high-strength alloys at various
load rates and temperatures, by Armando A. Iannelli
and F. J. Rizzitano. 25p. July 1966. CFSTI: AD-
647 884; N67-24412.
Odksztalcenia ptastyczne stopow Al Ni Fe wskutek
cyklicnych zmian temperatury. by Feliks Seyna. 24p.
Dec. 1966. Dep.: INR-768/.xiv/PS.
The plastic deformation of Al-Ni-Fe alloys on thermal
cycling.
On the influence of some killing elements on the mechanical
properties of neutron irradiated iron, by F. S.
Rossi and M. Castagna. 22p. 1966. Societa Ricerche
Impianti Nucleari. Centro Ricerche Nucleari, Saluggia,
Italy. N67-30097.'
83

Parametric study of flash thermal diffusivity measurements,
by B. H. Morrison and others. 26p. 1965.
CFSTL LA-DC-8300.
Thermal diffusivity measurements of two types of Armco
iron.
Random and systematic factors in the scatter of creep
data, by K. F. A. Walles. 17p. July 1966. CFSTI:
N67-19971.
Includes data on 18-12-Nb steel.
Reactor primary coolant system rupture study. Quarterly
progress report no. 4, Jan.-Mar. 1966. 120p.
Apr. 1966. General Electric Co., San Jose, Calif.
CFSTI: GEAP-5147.
. Quarterly progress report no. 5, April-June
1966. 65p. Aug. 1966. CFSTI: CEAP-5192.
-. Quarterly progress report no. 6, July-Sept.
1966. HOp. Nov. 1966. CFSTL GEAP-5279.
-. Quarterly progress report no. 7, Oct.-Dec,
1966. 51p. Feb. 1967. CFSTL GEAP-5427.
-. Quarterly progress report no. S, Jan.-Mar.
1967. 95p. May 1967. CFSTI: GEAP-5474.
Reduction of ductility by prestraining of maraging
steel and two Ti-alloys. by A. E. Armenakas and C.
Mylonas. 34p. Dec. 1965. CFSTI: SC-CR-67-2539.
Relationship bettveen microstructure and magnetic
properties of alnico alloys, by Krijn Jacobus de Vos.
127p. 1966. CFSTL N67-128S7.
Dissertation.
Report guide to fatigue testing literature, by Charles
P. Mcrhia. 69p. May 1967. CFSTL N67-3285S; AD-
652 881.
Rolling history in relation to the toughness of sh
84

plate, by B. M. Kapadia and W. A. Backofen. 46p.
May 1965. Ship Structure Committee, U. S. Coast
Guard Headquarters, Washington, D. C. (SS
C-168).
Solutions to the problems of high-temperature irra
tion embrittlement, by W. R. Martin and J. R. Weir.
29p. June 1966. CFSTI: N67-17422; ORNL-TM-
1544.
Some effects of temperature and frequency on the d
formation and fatigue rupture behavior of H46, by
G. P. Tilly, 49p. Jan. 1966. CFSTI: N67-27792.
Strengthening mechanisms of ultra-high-strength aus
tenitic steel, by Dieter Fahr. 51p. June 1966. CFSTI:
UCRL-16922.*
Dissertation.
Stress-strain characteristics of 321 stainless ste
nealed) at room and cryogenic temperatures, by W.
E. Witzell. 16p. Mar. 1966. General Dynamics/Convair,
San Diego, Calif. N67-17098.0
Structural strength of light alloys and steels. 16
1966. Air Force Systems Command, Foreign Technology
Div. Wright-Patterson Air Force Base, Ohio.
N67-2352Le
Translated from Konsfi-ufcrsionnaya ptochnost te&kikh
spavlovi stalcy. 1964. Mashinostroyeniye. Moscow.
(Structure dependence of viscous deformation in me
6 alloys). Progress report, June 1, 1966-Mar. 30,
1967, by Craig R. Barrett and William D. Nix. 21p.
Mar. 1967. Stanford University. Dept. of Materials
Science, Calif. CFSTI: N67-33881.
85

(Studies of steels). Quarterly report no. 8, July-Sept.
1966. Compagnie des Ateliers et Forges de la Loire,
Paris, France. 77p. 1966. CFSTL EURAEC-1800.
Studies of the fatigue strength of pressure vessel
Cyclic pressure tests of large size pressure vessels.
(2) Fast fracture tests of one-half scale pressure vessels.
(3) Effect of weld defects on the fatigue
strength of A 302B steel. Progress report no. 21, Oct.
1. 1966-Jan. 1, 1967, by A. G. Pickett and S. C
Crigory. 21p. Feb. 1967. CFSTI: SWRI-1228P1-37.
Study of hot cracking in welded high-strength stee
using the Varestraint test, by R. E. Thompson. 49p.
Mar. 1967. CFSTL N67-28246; AD-649 137.
Study of plastic fatigue embrittlement of reactor
sel steels. Quarterly report no. 9. 32p. May 1966.
Centre National de Recherches Metallurgiques, Division
Application des Metaux, Liege. Belgium.
CFSTL N67-14095.
Study of the early stages of plastic deformation.
report, by Norman Brown. 16p. Mar. 1967. CFSTI:
N67-28569; AD-649 168.
Review of research on microplasticity from 1956 to 1965.
Survey of some recent British work on the behavior of
warship structures, by J. Clarkson. 20p. Nov. 1966.
Ship Structure Committee, U. S. Coast Guard Headquarters,
Washington. D. C. CFSTI: SSC-178.
Survey of the mechanics of uniaxial creep deformat
of metals, by J. W. L. Warren. 42p. 1967. Aeronautical
Research Council. Teddington, England, (Current
papers no. 919). HMSO. 8/6.
Temperature and time dependence of the hardness of
86

iron and nickel, by J. Larsen-Badse. 25p. July 1967.
CFSTI: ORNL-TM-1861.
Tempered martensite embrittlement and fracture
toughness in 4340 steel, by Eric B. Kula and Albert
A. Anctil. 29p. Jan. 1967. CFSTI: N67-28613; AD-
651066.
Thermal and meclianical treatments for precipitationhardenable
stainless steels and their effect on mechanical
properties, by C. J. Slunder. and others. 204p.
Feb. 1967. CFSTI: N67-29173.
Thermodynamic properties of HCP iron and iron
ruthenium alloys, by Gerald L. Stepakoff and Lany
Kaufman. 37p. Apr. 1967. CFSTI: AD-650 151;
N67-2908L
Warm prestressing of pressure vessel steels, by W.
Andrews and others. I3p. CFSTI: KAPL-P-3350.
Wear rates of metals and oxides in 80° and 160" F.
purity water, by J. T. Dunn. 78p. Aug. 1966. CFSTI:
AECL-2602.
Zmiany wlasnosci stali nierdzewnej 1H18N9T starzon
w warunlutch temperaturowych reaktorow energetycznych.
Czescl: zmiany wlasnosci mechanicznych,
by F. Seyna and M. Chyczewski. 26p. Dec. 1966.
Dep: INR-770/xiv/PS.
The properties of stainless steel 1H18N9T after aging in
the power reactor temperature ranges. Part 1: Mechanical
properties.
ATOMIC AND NUCLEAR PHYSICS
American Society for Metals. Atomic and electronic
structure of metals; compilation of twelve papers
presented at a 1966 seminar. 259p. (1967?). The
Society, Metals Park, Ohio. $12.50.
37

Government Publications
Compatability of stabilized hypostoichiometric uranium-plutonium
monocarbide fuels with stainless
steel, by W. R. Jacoby, and others. 36p. Apr. 1967.
CFSTI: WCAP-3791-3.
Control specimen data for structural material irradiation
test program. 476p. Nov. 1964. CFSTI: N66-
20135.
Studies of radiation effects on structural materials at cryogenic
temperatures. Includes stainless steels and ferrous alloys.
Damaging neutron exposure criteria for evaluating
embrittlement of reactor pressure vessel steels in different
neutron spectra, by C. Z. Serpan, Jr. and L. E.
Stellc. 34p. 1966. U. S. Office of Naval Research
(NRL report no. 6415). CFSTI: AD-639 748.
Effect of charged-particle slowing down on the nuclear
cascade in steel initiated by 19.2-GeV/c protons, by
R. G. Alsmiller, Jr.. and others. 15p. Jan. 1967.
CFSTI: N67-24157; ORNL-3854.
Effect of neutron irradiation in 550°F. loop water on
the mechanical properties of Ni-Cr-Fe alloy 600, Ni-
Cr-Fe weld metal, and type 347 stainless steel. Final
report, by A. E. Powers and E. E. Baldwin. 31p.
Jan. 1967. CFSTI: KAPL-3161; N67-39025.
Effects of minor constituents on the irradiation damage
to austenitic stainless steels, by A. L. Bement. 62p.
Apr. 1966. CFSTI: BNWL-SA-492.
Engineering significance of ferrite grain size on the
radiation sensitivity of pressure vessel steels, by G.
M. Gordon and H. H. Klepfer. 30p. 1966. Gmelin:
AED-CONF-66-198-5.

From American Society for Testing and Materials, 69lh
Annual Meeting, Atlantic City.
Etude au moyen du trainage magnetique de diffusion
des defaults crees par irradiation dans le fer, by
Pierre Moser. 183p. (1965). DTIE: NP-16837.
Study by means of magnetic ordering of diffusion defects
created by irradiation of iron.
Fission fragment damage to type-304 stainless steel
fuel cladding, by H. S. Rosenbaum and others. 33p.
Jan. 1966. CFSTI: CEAP-5002; N67-20775.
Fracture mechanics evaluation of reactor vessel st
Quarterly progress report for the period ending Dec.
31, J966. 7p. Jan. 1967. Westinghouse Electric
Corp., Atomic Power Div., Pittsburgh, Pa. CFSTI:
WCAP-3677-2; EURAEC-1780.
. Quarterly progress report for the period ending
Mar. 31,1967, by L. F. Cochrun. 34p. Apr. 1967.
CFSTI: WCAP-3677-3; N67-36199.
. Quarterly progress report for the period ending
June 30, 1967. 22p. July 1967. CFSTL WCAP-
3677-4.
. Technical progress report, period ending Sept.
30, 1966. 21p. Oct. 1966. CFSTI: N67-27904;
EURAEC-1720.
Hydrogen embrittlement in irradiated steels, by A.
Rossin. 73p. Feb. 1967. CFSTI: ANL-7266; N67-
34900.
Influence de la composition stir la fragilite du fer pur
irradie, by J. Sebille, and others. 26p. 1966. Societa
Ricerche Impianti Nucleari. Centro Ricerche Nucleari,
Saluggia, Italy. N67-30097.0
Influence of composition on the brittleness of irradiated
pure iron.

Influence of neutron irradiation on the properties of
steels and welds typical of the ERR pressure vessel.
Topical report no. 4, by E. B. Norris. 90p. Jan. 1967.
Southwest Research Institute, San Antonio. Tex.
CFSTI: SWRI-1228P4-28.
Irradiation effects on steels and welds typical of those in
the Elk River Reactor pressure vessel.
Influence of nitrogen iron and steel under fast neutron
irradiation. Quarterly report no. 1, Oct. 1-Dec. 31,
1965. lOp. Sept. 1966. Societa Ricerche Impianti
Nucleari, Saluggia, Italy. CFSTI: EURAEC-1726;
N67-2368L
. Quarterly report no. 2, Jan. 1-Mar. 31, 1966.
9p. Sept. 1966. CFSTI: EURAEC-1727; N67-23590.
-. Quarterly report no. 3, Apr. 1-June 30, 1966.
lip. Sept. 1966. CFSTI: EURAEC-1728; N67-25994.
-. Quarterly report no. 5, Oct. 1-Dec. 31, 1966.
12p. Feb. 1967. CFSTL EURAEC-1816.
-. Quarterly report no. 6, Jan. 1-Mar. 31, 1967.
15p. May 1967. CFSTI: EURAEC-1864.
Annual report. 77p. Nov. 1966. CFSTI:
EURAEC-1773.
Irradiated effects on reactor structural materials
Quarterly progress report, May-July 1964. 373p.
Aug. 1964. General Electric Co.. Hanford Atomic
Products Div.. Richmond, Wash. CFSTI: HW-
83398.
Irradiation effects in Fortiweld steel containing different
boron isotopes, by M. Grounes. 22p. Jul. 1967.
Aktiebolaget Atomenergi. Stockholm, Sweden. N67-
36750.°
Irradiation effects on reactor structural material
Quarterly progress report. Nov. Dec, 1965-Jan.
90

1966. 279p. Feb. 1966. Battelle Northwest, Pacific
Northwest Laboratory, Richland, Wash. CFSTI:
BNWL-CC-510.
Quarterly progress report, Feb.-Apr. 1966.
224p. May 1966. CFSTI: BNWL-CC-658.
-. Quarterly progress report, Nov., Dec. 1966-
Jan. 1967. 203p. Feb. 1967. CFSTI: BNWL-CC-
1053.
Irradiation effects on reactor structural material
Quarterly progress report, Aug.-Oct. 1966, by L. E.
Steele and others. 30p. Nov. 1966. U. S. Naval Research
Laboratory (NRL-MR-1731). CFSTL AD-
646 662. N67-24S94.
. Quarterly report no. 1, Nov. 1-Jan. 31, 1967,
by J. R. Hawthorne and others. 45p. Feb. 1967.
(NRL-MR-1753). CFSTI: AD-650 349.
. Quarterly progress report Feb. 1-Apr. 30,1967.
62p. May 1967. CFSTI: AD-656 578.
Low temperature irradiation of steels for reactor
sure vessels, by A. Hanevik and T. Larsen. 40p. July
1966. Institutt for Atomenergi, Kjeller, Norway.
Messung der magnetischen Kleinwinkelstreuung thermischer
Neutronen an unmagnetisiertem Eisen, by
J. N. Mathur. 26p. Apr. 1967. Kiel University Institut
fuer Reine und angewandte Kemphysik. West
Germany. N67-38418.°
Magnetic small angle scattering of thermal neutrons in
unmagnetized iron.
Neutron irradiation embrittlement of several highe
strength steels, by L. E. Steele and others. 20p. 1966.
U. S. Office of Naval Research (NRL report no.
6419). CFSTI: AD-640 615.
91

From 3rd International Symposium on the Effects of Irradiation
on Structural Metal, Atlantic City.
New determination of the embrittlement in steel using
small specimens (=*0,22 cc.) in particular with respect
to irradiation. Progress report, Apr. 1-June 30,
1966, by H. C. van Elste. 42p. July 1966. Organization
for Industrial Research, TNO. The Hague,
Netherlands. CFSTI: N67-17544; EURAEC-1691.
. Progress report, M-66-875-50005, July 1-Sept.
30, 1966. 22p. Oct. 1966. CFSTI: EURAEC-1743;
N67-25602.
-. Progress report, M67-71-50005, Oct. 1-Dec. 31,
1966. 36p. Jan. 1967. CFSTI: EURAEC-1794;
N67-29735.
-. Progress report M67-403-50005, Jan. 1-Mar. 31,
1967. 72p. Apr. 1967. CFSTI: EURAEC-1857.
Radiation metallurgy section solid state division progress
report for period ending July 1966. 64p. Sept.
1966. Oak Ridge National Laboratorv, Tenn. CFSTI:
ORNL-4020.
Investigations on the response of weld heat-affected-zone
samples of ASTM A-212B pressure-vessel steel.
Radiation metallurgy section, solid state division progress
report for period ending January 1967, by
D. S. Billington and M. S. Wechsler. 53p. Apr. 1967.
CFSTI: ORNL-4097; N67-33202.
Research program on the effect of substructure on the
irradiation stability of ASTM A302 grade B steel
Quarterly progress report, by T. A. Trozera and P.
W. Flynn. 15p. Apr. 1966. General Dvnamics Corp.,
San Diego, Calif. CFSTI: N67-21801; EURAEC-
1634.
-. Quarterly progress report no. 5, July 1966. Sp.
1966. CFSTI: EURAEC-1696.
93

. Quarterly progress report no, 6. 13p. Oct. 1966.
CFSTI: EURAEC-1741; N67-28311.
-. Quarterly progress report no. 7. 14p. Jan. 1967.
CFSTI: GA-761S; EURAEC-1807; N67-29728.
-. Quarterly progress report no. 8.17p. Apr. 1967.
CFSTI: GA-7S95; N67-36239.
Research to determine the long-term meclianical properties
of metals subjected to mechanical stress at
elevated temperatures and neutron irradiation.
Quarterly report no. 17, Jan. 1-Mar. 31, 1967, by
W. Siegfried. 39p. 1967. CFSTI: EURAEC-1SS1.
Stress corrosion of irradiated type 316 stainless steel,
by C. F. Knights, lip. June 1967. HMSO: N67-
37631. Is. 9d.
Studio die fenomeni connessi con il danno da radiazione
net ferro: interazione fra difetti xntrodotti ed
atomi in soluzione interstiziale, by M. Castagna and
others. 13p. 1967. CFSTI: N67-27250.
Study of phenomena connected with radiation damage of
iron: interaction between defects introduced and atoms in
interstitial solution.
Study of the creep behavior of can materials under irradiation,
by K. Gast and W. Kramer. 48p. n.d.
CFSTL EUR FNR-129F.
Through-thickness notch ductility and tension properties
as a function of neutron exposure to a simulated
pressure vessel wall of a 302-B steel. Final report,
by Charles Z. Serpan, Jr., and J. Russell Hawthorne.
18p. June 1967. CFSTI: AD-658 019.
CORROSION
Agricola, K. R., and J. T. Snyder. Stress-corrosion of
explosively deformed high strength alloys. 16p. 1967.

American Society for Metals, Metals Park, Ohio.
(ASM-ASTME technical report no. WES 7-63).
Ahlquist, C. N. Influence of ausforming on the stress
corrosion susceptibility of some high-strength steels.
9p. 1967. American Society for Metals, Metals Park,
Ohio. (ASM technical report no. W 7-2.3).
Aockerblom, D. Zum Zunderverhalten warmfeste Turbinenstahle
insbesondere von 12-chromstahlen unter
uberhitztem Wasserdampf. lllp. 1966. Technische
Hochschule, Aachen.
Dissertation. On the oxidation behavior of high temperature
turbine steels especially 12-Cr steels in superheated
steam.
Balala, Ben. Prevention of corrosion failures in bridge
members. 13p. 1966. American Society for Metals,
Metals Park. Ohio. (Technical report no. GG 6-1.3).
Briggs, C. W. Atmospheric corrosion of carbon and low
alloy cast steels. 2p. n.d. American Society for Testing
and Materials, Philadelphia. Pa. (Paper no. 37).
British Iron and Steel Research Association. Corrosion
Advice Bureau. Background to the corrosion of steel
and its prevention. (1967?). (Booklet no. 3). The
Association. London.
. Preventing the corrosion of steel in supply
waters. (1967?). (Booklet no. 4). The Association,
London.
Fletcher. E. E. Stress corrosion cracking and hydrogen
stress cracking of high-strength steel. 20p. July 1966.
Battelle Memorial Institute. Defense Metals Information
Center, Columbus, Ohio. (DMIC report no.
232).
94

Guttman, H., and P. J. Sereda. Measurement of atmospheric
factors affecting the corrosion of metals. 47p.
n.d. American Society for Testing and Materials,
Philadelphia, Pa. (Paper no. 18).
Highway Research Board. Corrosion and protection of
metals: four reports. 56p. 1967. The Board, Washington,
D. C. (Highway research record no. 140).
$1.20.
Hissel, J., and L. Lilet. Etude de la composition des
rouilles en relation avec le mecanisme de la corrosion
atmospherique. 24p. 1966. Centre National de
Recherehes Metallurgiques, Liege.
Study of the composition of rusts in connection with the
mechanism of atmospheric corrosion.
Jones, Richard T. Applications of steels for desalination
plants, 23p. 1966. American Society for Metals,
Metals Park, Ohio. (ASM technical report no.
C 6-20.6).
Joumees internationales detttde sur Voxydation des
metattx, Brussels, October 6-8, 1965. Proceedings.
309p. 1966. Societe d' Etudes de Recherehes et d'
Applications pour l'lndustrie, Brussels.
International meeting for the study of oxidation of metals.
Kaesche, Helmut. Die Korrosion der Metalle. Physikalisch-
chemische Prinzipien und aktuelle Probleme.
viii, 374p. 1966. Springer-Verlag, New York. 66 DM.
Corrosion of metals. Physical-chemical principles and
topical problems.
Kofstad, Per. High temperature oxidation of metals.
340p. 1966. Wiley, New York. (Electrochemical Society
corrosion monograph series). $13.50.
'15

Logan, H. L. Stress corrosion of metals. 306p. 1966.
Wiley, New York. (Electrochemical Society corrosion
monograph series). $13.95.
Scully, J. C. Fundamentals of corrosion. 199p. 196
Pergamon, Oxford. $3.95.
T.N.O. Metal Research Institute. Corrosion Dept.
Specifications for the protection with asplxaltic bitumen
of cast iron and steel pipes and vessels to be
laid underground. S8p. (1966). The Institute, Delft,
Netherlands. D. f. 12.50.
English version of 1962 ed.
Wiederholt, Wilhelm, and J. Sonntag. Korrosion von
Metallen im Bauwesen. 62p. 1965. Ernst and Sohn,
Berlin. (Berichte aus der Bauforschung, v.44).
17.60 DM.
Corrosion of metals in construction engineering.
Government Publications
Additives prevent low-carbon steel corrosion in sulfurous
acid, by W. McLeod and R. R. Rogers. (2)p.
Dec. 1966. Dept. of Energy, Mines, and Resources,
Extraction Metallurgy Div., Mines Branch, Ottawa.
(No. RS-30).$0.25.
(Behavior of stainless steels in superheated steam
Quarterly report no. 5, July 1-Sept. 30, 1966, by G.
Chaudron. 18p. 1966. Centre National de la Recherche
Scientifique, Paris, France. CFSTI:
EURAEC-1749.
. Quarterly report no. 6, Oct. 1-Dec. 31, 1966,
18p. (1967). CFSTL EURAEC-1S04.
Cavitation-erosion characteristics of selected mat
in mercury at 500°F, by D. J. Kemppaincn and F. C.
96

Hammitt. 25p. Apr. 1967. Michigan University. Laboratory
for Fluid Flow and Heat Transport Phenomena,
Ann Arbor, Mich. NP-16858.°
Chemical physics of surface reactions of metals. F
report, June 1, 1965-May 31, 1965, by Earl A. Gulbransen,
and Richard L. Tallman. 127p. May 1967.
CFSTI: AD 653 723; N67-34054.
Correlations between sensitization and stress corr
cracking of 300 series stainless steels. Final summary
report, by J. J. Koziol and S. S. Christopher. 82p.
Sept. 1966. CFSTI: EURAEC-1568; N67-21567.
Corrosion behavior of stainless steels in sea wate
M. H. Peterson and T. J. Lennox, Jr. 33p. June 1967.
CFSTI: AD-657 938.
Corrosion behavior of steels and nickel alloys in
temperature sodium, by A. W. Thorley and C. Tyzack.
28p. (1966). CFSTI: NP-16413.
Corrosion of boron-stainless steel by nitric acid,
O. S. Irwin. 14p. July 1966. CFSTI: RFP-781.
Corrosion of iron- and nickel-base alloys in highperature
sodium and NaK, by J. H. DeVan. 25p. n.d.
DTIE: ORNI^P-2704.
From International Atomic Energy Agency Symposium on
alkali metal coolants, corrosion studies, and system operating
experience, Vienna, Austria.
Corrosion of materials in hydrospace, by Fred M.
Reinhart. 117p. Dec. 1966. CFSTI: AD-644 473.
Corrosion of stainless steels. Quarterly report no. 12,
October 1-December 31,1965, by G. Chaudron. 49p.
1965. Commissariat a l'Energie Atomique, Paris
(EUR-2691). CFSTI: EURAEC-1549.
97

Corrosion of stainless steels in high temperature water
and steam, by M. Warzee, and others. 14p. Feb.
1966. CFSTL EURAEC-1665; N67-25993.
Corrosion studies of Haynes 25 alloy in seawater u
electrochemical techniques, by Donald A. Kubose
and Herman L Cordova. 31p. Aug. 1967. CFSTI:
AD-656 897.
Development of an accelerated stress corrosion tes
for ferrous and nickel alloys. Annual summary report.
Mar. 17-Jan. 17,1967, by A. H. Freedman. 64p.
Feb. 1967. CFSTI: N67-26161.
Dynamic mass transfer of stainless steel in sodium
under high-heat-flux conditions, bv J. Hopenfeld
and D. Darlev. 54p. July 1967. CFSTL NAA-SR-
12447.
Effects of impurity additions on the intergranular
rosion of high purity Fe-Cr-Ni austenitic alloys, bv
J. S. Armijo. 20p. Oct. 1966. CFSTL CFAP-5047.'
Effects of notches and saltwater corrosion on the
ural fatigue projierties of steels for hydrospace vehicles,
by M. R. Cross and E. J. Czyryca. 42p. Oct.
1966. CFSTI: N67-21738; AD-644 147.
Electron optical survey of iron oxide films produc
in HjO, 1.5% JAOH, and LiOH/EDTA (pHll) solutions
at 316°C. Interim report, by R. L. Jones and
M. C. Bloom. 26p. Sept. 1966. U. S. Naval Research
Laboratory, Washington, D. C. (NRL-6442).
CFSTI: AD-643 401.
Exploration of steel corrosion mechanisms pertinent to
steam power generation.
Elk River Reactor operations analysis program final
98

eport: task 615. Corrosion samples and tests evaporator
water boxes, by C. R. Bergen. 34p. June 1966.
Allis-Chalmers Mfg. Co., Bethesda, Md. CFSTI:
ACNP-66542.
Formation of alkali iron sulfates and other compou
causing corrosion in boilers and gas turbines. Summary
report no. 1, July 1-Dec. 31, 1966. 51p. Dec.
1966. Battelle Memorial Institute, Columbus, Ohio.
CFSTI: AD-647 777; N67-24365.
. Summary report no. 2, Jan, 1-June 30, 1967.
57p. June 1967. CFSTI: N67-37044; AD-656 366.
Hydrogen embrittlement resulting from corrosion, c
thodic protection, and electroplating. Final report,
by E. Gileadi. 36p. Sept. 1966. Pennsylvania University.
Electrochemistry Laboratory, Philadelphia, Pa.
CFSTI: N67-17663; AD-641 089.'
Imperfections in metals. II: corrosion and oxidati
Quarterly report, July 1-Sept. 30, 1965. 18p. Mar.
1966. Centre d' Etude de 1'Energie Nucleaire, Mol,
Belgium. CFSTI: N67-25991.
. Quarterly report, Oct. 1-Dec. 31, 1965. 15p.
Apr. 1966. CFSTI: N67-25992.
. Quarterly report no. 14, Dec. 31, 1965-March
31, 1966. 14p. CFSTI: EURAEC-1701; N67-18523.
. Quarterly report no. 15, Apr. 1-June 30, 1966.
17p. 1966. CFSTI: EURAEC-1757.
-. Quarterly report no. 16, July-Sept. 30, 1966.
20p. 1966. CFSTI: EURAEC-1758.
In-pile corrosion of nuclear materials. Quarterly
port no. 3, Sept. 1-Noo. 30, 1965. 18p. Centre
d'Etude de 1'Energie Nucleaire, Mol. Belgium.
CFSTI: EURAEC-1652.
99

. Quarterly report no. 4, December 1,1965-February
28, 1966. 19p. CFSTI: EURAEC-1702; N67-
18601.
-. Quarterly report no. 5, June 1-Aug. 31, 1966.
35p. 1966. CFSTI: EURAEC-1784; N67-33014.
Influence of nitrogen additions on pliase relation
AIS1 type 304, Summary report 438-A. 32p. Aug.
1966. Virginia Polytechnic Institute. Dept. of Metals
and Ceramic Engineering, Blacksburg, Va. CFSTI:
EURAEC-1716.
Influence of surface treatment on corrosion of car
and stainless steels in high temperature water and
steam. Part II: corrosion evaluation through determination
of the hydrogen formed in the reaction.
Special report no. 6, by C. Sonnen and M. Warzee.
35p. Dec. 1966. CFSTI: N67-25901.
Influence of surface treatment on various types of
stainless steels corrosion, by J. Ph. Berge. 16p. Dec.
1966. CFSTL N67-21055; EURAEC-1709.
Presented at the 3rd International Congress on Metallic
Corrosion, Moscow. May 16-25, 1966.
Initiation and inhibition of corrosion of iron in neutral
aqueous solutions, by K. F. Lorking. 19p. Sept.
1966. Australian Aeronautical Research Committee.
Department of Supply, Melbourne. N67-30105.0
Intergranular corrosion of austenitic stainless st
highly oxidizing acid media, by H. Coriou. and
others. 16p. 1966. CFSTL ORNL-'tr-1623. JCL. $1.60
fascim., $0.80 mf.
Investigation of biaxial stress corrosion in two a
Final report, June 29. 1966-May 28, 1967, by A J
Jacobs. 49p. June 1967. CFSTI: N67-32634.
100

Investigation of long-term exposure effects under stress
on supersonic transport structural alloys, by George
Martin, lllp. 1966. CFSTI: N66-30400.
Investigation of several ferritic steels for high
ture service and their applicability in sodium systems
up to temperatures of about 600°C, by Juergen
Motz. lip. 1964. CFSTL AI-TRANS-233.
Koroze oceli vodou o radiacnich podminkach, by V.
Rypar and V. Zajic. 49p. Nov. 1966. Dep: UJV-1638.
Corrosion of steel by irradiated water.
Mass transfer effects in some refractory-metal-alkalimetal-stainless
steel systems, by J. R. Di Stefano.
28p. Nov. 1966. CFSTI: ORNL-4028; N67-22333.
Materials examination of a model sodium heated ste
generator. Final report, by D. W. Koch and P. J.
Kovach. 75p. June 1966. Babcock and Wilcox Co.,
Alliance, Ohio. CFSTI: N67-20831.
Metal corrosion in deep-ocean environments, by W.
Wheatfall. 31p. Jan. 1967. CFSTI; N67-21875; AD-
645 481.
Microbial corrosion of iron. Final report, Nov. 1953-
Dec. 1964, by Carl H. Oppenheimer. ISp. Mar.
1967. CFSTI: AD 653 368; N67-32519.
Microbial-metat corrosion — literature report. Fin
technical report, by Van Y. S. Hong. 33p. Feb. 1967.
CFSTI: AD-655 274.
Nitrogen tetroxide-stainless steel cryopanel corrosion
and coating degradation in space cliamber propulsion
testing, by P. G. Waldrep. 34p. Apr. 1967.
CFSTL AD-650 690; N67-29070.
101

Performance of types 304,, 316 and 34S stainless steel
in NoK at high temperatures, by T. L. Hoffman.
lip. May 1967. CFSTI: IN-1089; N67-34786.
Polarization cliaracteristics of high purity nicke
iron-chromium-nickel alloys in sulfuric acid solutions,
by D. O. Condit and R. W. Staehle. 63p. Sept.
1966. CFSTI: COO-1319-46.
Potentiodynamic investigation of tlte corrosion of
by Howard A. Porte. 16p. Sept. 1964. CFSTI: AD-
450 221.
Relationship of nitrogen content of austenitic sta
steels to stress corrosion. Quarterly report no. 9,
July 1-Sept. 30,1966, by Thomas B. Cox. ISp. 1966.
Virginia Polytechnic Institute, Blacksburg, Va.
CFSTI: EURAEC-1755; N67-23182.
. Quarterly report no. 10, Oct. 1-Dec. 31, 1966,
by Thomas B. Cox and John F. Eckel. 24p. CFSTI:
EURAEC-1806; N67-28600.
Quarterly report no. 11, Jan. 1-Mar. 31,
1967. by Thomas B. Cox. 32p. Mar. 1967. CFSTI:
EURAEC-1S38; N67-36629.
-. Quarterly report no. 12, by Thomas B. Cox.
14p. June 1967. CFSTI: EURAEC-1902.
Sodium mass transfer. 11. Screening test data attd
alysis: mass transfer results, by R. W. Lockhart,
comp. and ed. 131p. April 1962. General Electric
Co., San Jose, Calif. CFSTL CEAP-3726. (v.l).
. IX. The effect of carbon and carbonate additions
in a sodium test loop. 48p. May 1966. CFSTI:
GEAP-4436.
XII. 1963 test run report, July-December.
170p. Oct. 1964. CFSTI: GEAP-4439.
102

. XIV. Statistical analysis of 1961 to 1964 sample
weight change data, by J. L. Jaech and others. 44p.
Oct. 1965. CFSTI: GEAP-4830.
-. XVIII. Extended studies of carbon movement
in pumped sodium test loops, by D. E. Plumlee and
others. 82p. June 1965. CFSTL GEAP-4834.
XXII. Metallurgical examination of the test
loops, by M. C. Rowland and D. E. Plumlee. 520p.
October 1965. CFSTL GEAP-4838.
Stabilization of carbon and nitrogen in stainless
and its effect on mass transfer in stainless steel-Cb-
IZr-potassium system, by R. W. Harrison, v, 33p.
June 1967. CFSTL NASA-CR-806; N67-29031.
Stainless steel failure investigation program. Qua
progress report, Jan.-Mar. 1966, by R. N. Duncan,
comp. 42p. Apr. 1966. General Electric Corp.. Vallecitos
Atomic Laboratory. San Jose, Calif. CFSTL
N67-1397L
. Quarterly report no. 6, July 1-Oct. 31, 1966.
58p. Dec. 1966. General Electric Co., Nuclear
Technology Dept., Pleasanton, California. CFSTL
GEAP-5281; N67-38574.
Stainless steels with a silicon addition: general
of their behavior in highly oxidizing acid media, by
H. Coriou. and others. 22p. 1965. CFSTI: ORNL-tr-
1626. JCL, $2.60 fascim., $0.86 mf.
Stress-corrosion cracking of carbon steel in simul
waste solutions, by L. P. Costas and others. 33p.
1966. CFSTL N67-10775.
Stress-corrosion cracking resistance of an 18Ni 20
grade maraging steel base plate and weld, by G.
103

Sandoz and R. L. Newbegin. 13p. Mar. 1967. CFSTL
N67-33575; AD-654 161.
Structural clianges in higlt-strength steel associated
with stress corrosion and its relationship to delayed
failure. Summary research report, by D. I. Phalen
and others. 23p. July 1965. CFSTL AD-468 171.
Studies of steel corrosion in high temperature water
and steam. Quarterly report no. 15, April 1-June 30,
1966. 79p. July 1966. Societe d'Etudes, de Recherehes
et d'Applications pour I'lndustrie, Brussels
(EUR-2876). CFSTI: EURAEC-1689.
. Quarterly report no. 16, July 1-Sept. 30,1966.
89p. Oct. 1966. CFSTL EURAEC-1744; N67-23186.
-. Quarterly report no. 17, Oct. 1-Dec 31, 1966.
112p. 1966. CFSTI: EURAEC-1796; N67-31467.
-. Quarterly report no. 18, Jan. 1-Feb. 28, 1967.
102p. May 1967. CFSTI: EURAEC-1850.
Study of chrome-nickel-iron austenites for their c
rosion behavior from the standpoint of their application
in the nuclear field, by H. Coriou, and
others. 33p. 1966. CFSTI: ORNL-tr-1628. JCL.
$3.60 fascim., $1.19 mf.
Study of the mechanism of stress corrosion cracking
of the iron-nickel-chromium alloy system.
Quarterly report, March 17, 1966 —June 16,
1966, by R. W. Staehle. 56p. August 1966. Ohio
State University Research Foundation. Columbus,
Ohio. CFSTL COO-1319-42; N67-20890.
. Quarterly report, Dec. 17, 1966 — Afar. 16,
/967. 27p. June 1967. CFSTI: COO-1319-56.
(Testing of stainless steels). Summary of quarterl
report no. 9, Oct.-Dec. 1966. 124p. (1967). Com-

pagnie des Ateliers et Forges de la Loire. Centre
de Recherehes, Paris, France. CFSTL EURAEC-
1865.
Tests for hydrogen embrittlement of steels used in
tank farm cylinders, by R. L. Mills and F. J. Edeskuty.
15p. Oct. 1966. CFSTI: LA-3602.
INSPECTION AND CONTROL
American Foundrymen's Society. Microstructure standards
for malleable iron. 31p. 1966. The Society, Des
Plaines. 111. $5. (Members $2.50).
American Institute of Steel Construction. Standard
specifications and load tables for long-span steel
joists, open web steel joists. 52p. 1967. The Institute,
N. Y.
American Society for Testing and Materials. Book
of ASTM standards, 1967.
Pt. 1. Steel piping, tubing, and fittings, xviii, 660p.
1967. The Society, Philadelphia, Pa. $10. (Members
$7).
Pt. 2. Ferrous castings, xiv, 418p. 1967. $8. (Members
$5.50).
Pt. 3. Steel sheet, strip, rod, wire, chain, and spring;
wrought iron bar and sheet; metallic coated products;
ferrous surgical implant materials, xxi, 834p.
1967. $14. (Members $9.80).
Pt. 4. Structural steel; concrete reinforcing steel;
boiler and pressure plate; steel rails, wheels, and
tires; bearing steel; steel forgings; ferrous filler metal;
ferro-alloys, xxi, 920p. 1967. $16. (Members
$11.20).
Pt. 31. Physical and meclianical testing of metals—
metallography, nondestructive testing, fatigue, ef-
105

feet of temperature, xvii, 972p. 1967. $16. (Members
$11.20).
Pt. 32. Chemical analysis of metals, sampling and
analysis of metal bearing ores, xvii, 914p. 1967. $16.
(Members $11.20).
-. Fatigue crack propagation. 1967. The Society,
Philadelphia. (ASTM special technical publication
no. 415).
Baikov, A. A., and A. I. Ponomarev, eds. Khimiches
i specktraTnyi analiz v metallurgii. 38p. 1965. Nauka,
Moscow. 2R.32K.
Chemical and Bpectrographical analysis in metallurgy.
Betz, Carl E. Principles of magnetic particle testing.
525p. 1966. Magnaflux Corp., Chicago. $7.35.
British Iron and Steel Research Association, Recom
mended A.S.T.M. practice for plane-strain fracture
toughness testing of high strength metallic materials
using a fatigue-cracked bend specimen. 8p. 1967.
The Association, London, (Report no. MG/EB/312/
67).
British Iron and Steel Research Association. Metal
lurgy Division. Analysis of highly-alloyed steels by
x-ray fluorescence using a solution technique. 17p.
(1964). The Association. London. (Report no. MG/
D/28I/64).
British Standards Institution. Cast iron check val
for general purposes. 1966. The Institution, London.
(CP 4090: 1966). 8s.
. Cast iron spigot and socket soil, waste and
ventilating pipes (sand cast and spun) and fittings.
1967. (BS 416: 1967). 20s.
. Coal tar based hot applied coating materials
106

for protecting iron and steel including suitable primer
where required. 41p. 1967. (BS 4164: 1967).
15/-.
-. Cold worked steel bars for the reinforcement
of concrete. Rev. 1.12p. Mar. 1967. (BS 1144: 1967).
5/-.
-. Electrode wires and fluxes for the submerged
arc welding of mild steel and medium-tensile steel.
1967. (BS 4165: 1967). 10s.
-. General requirements for the flash welding of
steel pipes and tubes for pressure and other high
duty applications. Metric units. 1967. (BS 4204:
1967). 10s.
-. Hot applied bitumen based coatings for ferrotts
products. 19p. Mar. 1967. (BS 4147: 1967). 7A.
-. Hot rolled bars and hard drawn wire for the
reinforcement of concrete. 15p. 1967 (BS 785: Pt. 1:
1967). 6s.
. Metal scaffolding. 1967. (CP 97: Pt. 1: 1967).
15s.
. Methods for non-destructive testing of steel
castings. 26p. 1966. (BS 4080: 1966). 7s.
-. Methods for non-destructive testing of steel
forgings. Pt, 1. Ultrasonic flaw detection. 15p. Feb.
1967. (BS 4124: Pt. 1: 1967). 6A.
. Methods for the analysis of iron and steel.
Pt. 6. Nickel in iron, carbon steel and low alloy
steel: pltotometric. Rev. 1. 7p. Mar. 1967. (BS 1121:
Pt. 6: 1967). 4/-.
Pt. 10. Silicon in iron and steel: gravimetric. 6p.
1967. (BS 1121: Pt. 10: 1967). 4s.
Pt. 11, Carbon (total, graphitic and combined) in
iron, steel and ferro-chromium: gravimetric, lip.
1967. (BS1121: Pt. 11: 1967). 5s.
107

Pt. 24. Chromium in iron and steel: photometric.
6p. 1967. (BS 1121: Pt. 24: 1967). 4s.
Pt. 35. Aluminum in iron, steel and low-carbon ferro-chromium.
1967. (BS 1121: Pt. 35: 1967). 5s.
Pt. 38. Arsenic in iron and steel: volumetric. 7p.
1967. (BS 1121: Pt. 38: 1967). 4s.
Pt. 39. Nitrogen in steel: volumetric. Rev. 1. 12p.
Mar. 1967. (BS 1121: Pt. 39: 1967). 5/-.
Pt. 40, Tungsten in steel: gravimetric. Rev. 1. 7p.
Mar. 1967. (BS 1121: Pt. 40: 1967). 4/-.
Pt. 41. Lead in carbon steel and low alloy steel: gravimetric.
Rev. 1. 6p. Mar. 1967. (BS 1121: Pt. 41:
1967). 4A.
Pt. 50. Magnesium in cast iron: volumetric. 8p. Jan.
1967. (BS 1121: Pt. 50: 1967). 3A-
-. Methods for the analysis of iron ores. Pt. 1:
Method for the determination of iron in iron ores.
8p. Mar. 1967. (BS 4158: Pt. 1: 1967). 4A.
-. Methods for the /ton-destructive testing of
pipes and tubes. Pt, 2A: Eddy current testing of ferrous
pipes and tubes. lOp. 1965. (BS 3889: Pt. 2A:
1965).
-. Methods for the sampling of iron and manganese
ores. Pt. 1: Manual sampling. 9p. 1967. (BS
4103: Pt. L 1967). 4A.
-. Methods for the sampling of iron, steel, permanent
magnet alloys and ferro-alloys. Rev. 1. 18p.
1966. (BS 1837: 1966). 6A.
Self-tapping screws and metallic drive screws.
1967. (BS 4174: "1967). 25s.
. Specification for cast and forged steel wedge
gate, globe, check and plug valves screwed and
socket-welding sizes 2 in. and smaller for the petroleum
industry. 16p. 1966. (BS 2995: 1966). 15s.
[08

. Specification for Class 1 arc welding of ferritic
steel pipework for carrying fluids. 86p. 1966. (BS
2633: 1966). £1 10s.
Specification for dimensional tolerances for
steel drop and press forgings and for upset forgings
made on horizontal forging machines. Metric and
inch units. 33p. 1967. (BS 4114: 1967). 15s.
-. Specification for flanged steel parallel slide
valves for general purposes. 19p. 1967. (BS 4133:
1967). 7s.
-. Specification for H-section steel arches for use
in mines. 24p. 1966. (BS 227: 1966). 7s.
-. Specification for light gauge stainless steel
tubes, lip. 1967. (BS 4127: 1967). 5s.
-. Specification for stainless steel mild pipes and
fittings (recessed ring joint types). 25p. 1966. (BS
1864: 1966). 8s.
-. Steel pipes, fittings ami specials for water, gas
and sewage. 1966. (BS 534: 1966). 8s.
-. Steel roller chains for conveyors: cluiins and
chainwheels. 1967. (BS 4116: Pt. 1: 1967). 6s.
-. Steel tubes and tubulars suitable for screwing
to BS 21 pipe threads. Metric and inch units. 1967.
(BS 1387: 1967). 8s.
-. Steel wire for fences. 1967. (BS 4102: 1967).
7s.
British Steel Castings Research Association. Non-d
structive Testing Committee. Recommended procedure
for the non-destructive testing of steel castings
by visual examination, acid pickling and etching,
pressure testing and penetrant flaw detection, iv,
19p. July 1967. The Association, Sheffield. 15A.
. Recommended procedure for the radiographic
109

flaw detection of steel castings, iv, 14p. July 1967.
The Association, Sheffield. 15A.
Brown, William F., Jr., and John E. Srawley. Plane
strain crack toughness testing of high strength metallic
materials. 134p. 1967. American Society for Testing
and Materials. Philadelphia, Pa. (ASTM special
technical publication no. 410). $5.50.
DIN-Taschenbuch 4. Teil A, Werkstoffnormen. Stahl
und Eisen. Technische Lieferbedingungen, Eigenschaften,
Abmessungen. 424p. 1967: Beuth-Vertrag,
Berlin. 43 DM.
DIN-notebook 4. Part A. Material standards. Iron and
steel. Technical sales stipulations, quality and dimensions.
Deutscher Normenausschuss and Verein Deutscher
Eisenhuttenleute. Kurznamen und Werkstoffnummern
der Eisenwerkstoffe in DIN-Normen und
Stahl-Eisen-Werkstoffblattern. Ed. 4. lOSp. 1966.
Beuth-Vcrtrieb, Berlin. DM 10.
Abbreviations and numbers of the ferrous materials in
Din standards and iron and steel specifications.
Filipczynski, Leszek. and others. Ultrasonic methods
of testing materials, viii, 2-SOp. 1966. Butterworth,
London. $13.
Originally published as Uttradrwiekowe metody badania
materialow, Wydawnictwa. Warsaw. 1959.
Franklin, A. G. Electron probe microanalyzer. 4p.
1966. British Iron and Steel Research Association,
London. (Report no. SM/B/16/66).
. Progress with the electron probe microanalyzer—1966.
Quantitative x-ray microanalysis. lOp.
1967. British Iron and Steel Research Association.
London. (Report no. SM/B/108/67).
Hall, G, D., and P. H. Scholes. Nitrogen determina
no

in steel using automatic titration. 1967. British Iron
and Steel Research Association, London. (MG/D/
460/67).
Haussmann, M. Elektrochemische Messingen an Eisen-Sauerstoff-Schmeltzen.
71p. 1965. Technische
Hochschule, Aachen.
Dissertation. Electrochemical measurements on iron-oxygen
melts.
Jernkontoret Research Organization. Examination of
steels for slag inclusions. 66p. 1966. Almqvist, Stockholm.
15 kr.
McKinley, T. D. and others. Electron microbe; symposium
sponsored by the Electrochemical Society
held in Washington, D. C, Oct. 1964. 1035p. 1966.
Wiley, New York. $27.50.
Progress in applied materials research, v. 7. 355p
Heywood, London.
Review of non-destructive test methods.
Scholes, P. H. Wosthoff automatic carbon determination
apparatus. 19p. 1966. British Iron and Steel
Research Association, London. (Report no. MG/D/
244/62).
Scholes, P. H., and R. V. Williams. Spectrographs
analysis of molten steel: a review. British Iron and
Steel Research Association, London. (MG/D/302/
66).
Smothers, W. J., and Yao Chiang. Handbook of differential
thermal analysis. 633p. 1966. Chemical
Publishing Co., New York. $17.50.
Verein Deutscher Eisenhuttenleute. Handbuch fur
das Eisenhuttenlaboratorium, Bd. 2: Die Untersuch-
lll

ung der metallischen Stoffe. Ed. 2, revised and enlarged,
xxiii, 441p. 1966. Verlag Stahleisen, Dusseldorf.
88 DM.
Handbook for the iron and steel works laboratory, v. 2:
investigation of metallic materials.
. Oberflachenfehler an kalt gewalztem Band
und Blech. 4Sp. 1967. Verlag Stahleisen, Dusseldorf.
28 DM.
Surface defects in cold rolled strip and sheet.
Verein Deutscher Ingenieure. Harteprufung in Theor
und Praxis; Vortrage der VDI-Tagung, Dortmund
1965. 160p. 1967. VDI-Verlag, Dusseldorf. (VDI-
Berichtc Nr. 100). 66 DM.
Hardness testing in theory and practice; report of VDI
meeting at Dortmund, 1965.
Verein Deutscher Ingenieure, Ruhrbezirksverein and
. Arbeitskreis Energietechnik. Kontinuierliche Messung
der Staub- und Gas-Emission. Tagung vom
23 November 1965 in Haus der Technik. 48p. 1966.
Vulcan-Verlag, Essen. (Haus der Technik Vortragsveroffentlichungen,
H. 71). 12 DM.
Continual measurement of dust and gas emission. Meeting
held at the Haus der Technik. November 23. 1965.
Government Publications
Advancement of ultrasonic techniques using reradiated
sound energies for nondestructive evaluation of
weldments. Quarterly progress report no. 3, Jan-
Mar. 1966, by B. T. Cross and W. M. Tooley, 26p.
Apr. 1966. Automation Industries, Inc. Boulder,
Colo. CFSTI: AD-641 025.
. Quarterly progress report no. 4, Apr.-June
1966. 21p. July 1966. CFSTL AD-641 026.
. Quarterly progress report no. 5, July-Sept.
1966. 23p. Oct. 1966. CFSTL AD-641 354.
112

-. Quarterly progress report no. 6, Oct. 1-Feb.
15,1967. 23p. Mar. 1967. CFSTI: AD-650 282.
Developments in the harmonic analysis method for t
nondestructive determination of case depth of carburized
steel, by H. P. Hatch and K. A. Fowler.
26p. May 1966. CFSTI: N67-14707; AD-640 052.
Electromagnetic inspection of hardened steel, by T
odore A. Cox. 63p. Apr. 1967. CFSTL AD-653 007;
N67-32844.
High-temperature vacuum fatigue testing of type 31
stainless steel and incone! X with a reasonance-type
machine, by H. H. Smith and others. 17p. Mar. 1967.
CFSTI: AD- 650 934; N67-29490.
High volume nondestructive test applications at th
Hanford atomic products operation, by D. C. Worlton.
29p. 1965. CFSTL BNWL-SA-97.
Improved instrumental methods for rapid analysis o
stainless and maraging steels, by W. D. McHenry
and O. J. Littig. 20p. June 1967. CFSTI: AD-658
074.
Inspecao ultra-sonica de chapas de aco ASTM-A-212-
B-FB, segundo ASTM A-435/59T, by L. X. Nepomuceno.
19p. Feb. 1967. Laboratorio de Acoustica
e Sonica, Sao Paulo, Brazil. N67-37770.®
Ultrasonic inspection of ASTM-A-212-B-FB steel plates
according to ASTM A-435/59T. Summary in English.
Inspecao ultra-sonic de chapas de aco de conformid
com ASTM A-435/57T e VDE-072/57 — entwurf e
de pecas avulsas, by L. X. Nepomuceno and others.
38p. Feb. 1967. Laboratorio de Acoustica e Sonic,
Sao Paulo, Brazil. N67-38496.*
113

Ultrasonic inspection of steel plates according to ASTM
A-435/57 T and VDE-Entwurf 072/57 and of arbitrary
parts.
Inspecao ultra-sonica de chapas de aco especial, by
L. X. Nepomuceno. 38p. Aug. 1966. Laboratorio de
Acustica e Sonica, Sao Paulo, Brazil.
Ultrasonic inspection of special steel plates. Summary in
English,
Mechanical properties and bonding efficiency of st
composites, by Charles F. Hickey, Jr. lOp. May 1967.
CFSTI: N67-33979; AD-653 545.
Nondestructive evaluation of metal fatigue. Scient
report 1966-1967, by Felix N. Kusenberger, and
others. 92p. Apr. 1967. CFSTI: AD- 653 587; N67-
34867.
Nondestructive examination of welds. Final report
1. lip. Apr. 1967. Roentgen Technische Dienst N.
V., Rotterdam. CFSTI: EURAEC-1859.
Nondestructive flaw detection by use of acoustic e
issions, by D. L. Parry. 44p. May. 1967. Phillips
Petroleum Co., Atomic Energy Div., Idaho Falls,
Idaho. CFSTI: N67-35849.
Onderzoek van lasen lijmverbindingen voor a koestische
scliaalmodellen, by T. ten Wolde and W. H.
Suite Maartensdijk. 37p. May 1967. Technisch Physische
Dienst TNO-TH, Delft, Netherlands. N67-
34323.°
Testing of welded and bonded joints for acoustic scale
models.
Standard reference materials. Determination of oxy
in ferrous materials, SRM 1090, 1091 and 1092, by
Oscar Menis and J. T. Sterling. 28p. 1966. U. S.
114

National Bureau of Standards. (Miscellaneous publication
no. 260-14). GPO. $0.30.
Homogeneity characteristics of NBS spectrometric
standards 3, white cast iron and stainless
steel powder compact, by H. Yakowitz and others.
19p. 1966. U. S. National Bureau of Standards (Miscellaneous
publication no. 260-12). GPO. $0.20.
Steel, chemical composition and hardenability. 82p
Apr. 1967. Federal Supply Service, General Services
Administration, Washington, D. C. (Federal
standard 66c). $0.50.
Stress-relaxation tests with elastic follow-up on
steels, by M. F. Day and F. R. Ferguson. 16p. Jan.
1966. CFSTI: N67-13597.
Ultrasonic examination of welded joints in steel p
of thicknesses up to 300 mm. Quarterly progress report
no. 18, by A. Sterke. 31p. Aug. 1966. Roentgen
Technische Dienst N. V.. Rotterdam (EUR-2883).
CFSTI: EURAEC-1695; N67-20876.
Ultrasonic spectroscopy, by Otto R. Gericke. 19p.
1966. CFSTI: N67-26743.
PRODUCTS AND PARTS
American Iron and Steel Institute. Sheet Committees.
Handbook of steel and highway construction products.
368p. (1967). The Institute, New York. $1.75.
American Iron and Steel Institute. Stainless Steel
ducers Committee. Stainless steel and tlie chemical
industry. 1966. The Institute, New York.
. Stainless steel data manual; suggested practices
for roofing, flashing, copings, fascia, gravel
stops, drainage. 28p. Sept. 1966. The Institute, New
York.
115

Bernick, L. M., and W. H. McFarland. High strength
low carbon steels in rigid packages. 32p. 1966. American
Society for Metals, Metals Park, Ohio. (ASM
technical report no. C 6-8.1).
Cannon, H. S. New metal substrates from the can
makers viewpoint. 14p. 1966. American Society for
Metals, Metals Park, Ohio. (ASM technical report
no. C 6-8.4).
Chambre Syndicale des Fabricants de Tubes d'Acier.
Tube dacier dans la construction metallique, 96p.
1966. The Federation, Paris.
Steel tube in steel construction.
Chosy, Eugene. Use of high strength steel in the
trailer industry. 14p. 1966. American Society for
Metals, Metals Park, Ohio. (ASM technical report
no. C 6-14.3).
Hamaker, J. C, Jr. New steels for aerospace toolin
22p. 1967. American Society for Metals, Metals
Park, Ohio. (ASM—ASTME Technical report no.
WES 7-80).
Hot Dip Galvauizers Association. Hot galvanized st
in agriculture. 16p. (1967?). The Association, London.
Kollbrunner, C, and S. Milosavljevic. Vcrschlussar
beim Stahlwasserbau. Einteilung nach kennzeichnenden
Merkmalen und Ubersichten. 36p. 1966. Verlag
Leeman, Zurich. 6 Swiss francs.
Types of closing devices in steel hydraulic engineering
construction. Classification according to distinctive features
and surveys. Part 1.
Langton, John William. Sheet metal production.
xi. 191p. 1967. Pitman. London. 35/-.
116

Lickteig. E. SchraubenhersteUung. 231p. 1966. Verlag
Stahleisen, Dusseldorf. 42 DM.
Manufacture of bolts.
Nunninghoff, R. Einfluss der Hertsellungsbedingungen
auf die Verwendbarkeit verzinkten Stahldrahte. 99p.
1965. Technische Hochschule, Aachen.
Dissertation. Effect of production conditions on the applicability
of galvanized steel wire.
Perfetti. Bruno M. Properties and some uses of steel
foils and steel foil composites. 18p. 1966. American
Society for Metals, Metals Park, Ohio. (ASM technical
report no. C6-9.1).
Society of Automotive Engineers. Evaluating the surface
texture of cold roll sheet steel for automotive
panels. 29p. 1965. The Society, New York. (SP-268).
$4. (Members $3).
Taschinger. Otto. Stahl im Leichtbau vom Eisenbahnwagen.
180p. 1967. Verlag Stahleisen Dusseldorf.
(Monographien liber Stahlvcrwendung, H. 26). 5
DM.
Steel in light construction of iron railroad cars.
Wilkening. Hermann. Die Ermittlung der radialen
Haspelbelastung beim Wickeln von bandformingem.
131p. 1965. Technische Hoschule, Aachen.
Dissertation. Investigation of radial reel stress of band
shaped coils.
Wire Reinforcement Institute. Welded wire fabric
general information manual. Rev. ed. 40p. (1967).
The Institute, Washington, D. C.
Government Publications
Buckling strength of fabricated HY-80 steel spherical
shells. Final report, by Thomas J. Kiernan and Kane-
117

hiro Nishida. 153p. July 1966. CFSTL N67-12196;
AD-637 791.
Cost effectiveness in sheet-steel bulkhead replacement,
maintenance, and repair. Final report, Aug.
31-Dec. 31, 1966, by Kenneth G. Fettig and Russel
L. Jones. 188p. Dec. 1966. CFSTI: AD-647 228.
Emerging aerospace materials and fabrication techniques.
190p. Jan. 1967. Air Force Materials Laboratory,
Research and Technology Div., Air Force Systems
Command, Wright-Patterson Air Force Base,
Ohio. (Technical report no. AFML-TR-67-1).
Indentification symbols for iron and steel, nonfer
metals, and alloy products. 35p. Mar. 1967. CFSTI:
N67-27382.
Translated from Chung-hua Jen-min Kung.ho-kuo Kuochia.
Peiping, Dec. 1963. Standard identification symbols
adopted by the metallurgical industry of the Chinese
People's Republic are presented in tables by categories and
groups.
Investigation to determine the applicability of high
yield steel in the construction of transversely
framed ships, by Ronald K. Kiss. 72p. 1966. CFSTI:
PB 174022.
Iron-chromium-aluminum-yttrium alloy for electrical
heating elements, by H. R. Stcphan and J. F.
Collins. 7p. October 18. 1966. CFSTI: GEMP-440.
Low-cycle fatigue testing of partial penetration w
ed reactor vessel nozzle connections. Pt. 1. Testing
technique, by B. D. Hackney and others. 33p. June
1965. General Electric Co., San Jose, Calif. APED-
4904.°
. Pt. 2. Fabrication aspects, by B. D. Hackney
and C. J. McDaniel. 25p. July 1966. APED-4923."
118

New stainless steels for sttrgical cutting instruments,
USSR, by Ye. Ya. Rauzina and others. lOp. Feb.
1967. CFSTI: TT-67-30623; JPRS-39976; N67-27760.
Rolling element fatigue life of SAE 52100 steel ho
balls, by Herbert W. Scibbe and others. 16p. Feb.
1967. U. S. National Aeronautics and Space Administration.
CFSTI: NASA-TN-D-3832. $1.
Study of the operating characteristics of the heat
Quarterly progress report, by J. K. Ferrel and A.
Camesale. 20p. Oct. 1966. CFSTI: N67-25558.
Testing and design of stainless steel heat pipe.
Study of weldments and pressure vessels made of HY
150 steel plates. Final report, Nov. 1965-Dec. 1966,
by C. F. Tiffany and others. 178p. Jan. 1967.
CFSTI: N67-19872.
DESIGN AND CONSTRUCTION
American Iron and Steel Institute. Hot Rolled and
Cold Rolled Sheet and Strip Producers Committee
and the Galvanized Steel Producers Committee.
Steel architectural products — the new generation.
21p. Apr. 1967. The Institute, New York.
Arutyunyan, N. Kh. Some problems in tlie theory of
creep. 290p. 1966. Pergamon Press, London. £. 4.
Intended for reinforced concrete designers: also of interest
to engineers concerned with steel -and -concrete composite
construction.
Bares, R., and Ch. Massonnct. Le calcul des grilla
de poutres et dalles orthotropes selon la methode
Guyon-Massonnet-Bares. 432p. 1966. Dunod, Paris.
84 Fr. fr.
Analysis of beam grillages and orthotropic plates by the
Guyon-Massonnet-Bares method.
119

Beratungstelle fiir Stahlverwendung. Stahl und Form.
Hallenkirche in Stahlrohrbauweise. Einfuhrung:
Wolfram A. Wienhold. 32p. 1966. Verlag Stahleisen
i. Komm., Dusseldorf. 3 DM.
Steel and form. Church construction in steel tubular
construction.
Gatz, K., and F. Hart. Stahlkonstruktionen im Hochbau.
192p. 1966. Verlag Georg D. W. Callwey, Munich.
48 DM.
Steel structural engineering.
Greenberg, Herman D., ed. Application of fracture
toughness parameters to structural materials. 416p.
1966. Gordon & Breach, New York. $24.95 (Paper
$10.50).
Cregor, A. Der praktische Stahlbau. Tragerbau. Ed. 4.
606p. 1966. VEB Verlag Technik. Berlin.
Practical steel construction. Girders.
Holtzhausen, Paul, and others. Kleine Stahlkunde
fur das Bauwesen. HOp. 1966 Verlag Stahleisen i.
Komm., Dusseldorf. (Monographien uber Stahlverwendung,
IL 27). 4 DM.
Concise steel information for the construction industry.
Institut Technique der Batiment et des Travaux Publics
and Centre Technique Industrie] de la Construction
Metallique. Regie de calcul des constructions
en acier. 310p. 1966. Societe de Diffusion des Techniques
du Batiment et des Travaux Publics, Paris.
55.70 Fr. fr.
Design rules for steel structures.
Kerkhofs, W. Stabilite des constructions, v.l. Constructions
metalliques. Ed. 6. 204p. 1966. The Author.
350 Bel. fr.
Stability of suucturcs, v. 1. Steel structures.
120

Lipson, Charles. Wear considerations in design. 148p.
1967. Prentice-Hall, Englewood Cliffs, N. J. $6.50.
Macquart, B. Baremes et abaques de construction metallique.
v.2. Ed. 2. 216p. 1967. Belgo-Luxemburg
Steel Information Centre, Brussels. 550 Belgian fr.
Structural steelwork graphs and charts.
Makowski, Z. S. Steel space structures. 214p. 1964.
Michael Joseph, London. 42s.
Massonnet, C, and M. Save. Calcul plastique des constructions,
v.l. Ed. 2. 548p. 1967. Belgo-Luxemburg
Steel Information Centre, Brussels. 750 Belgian fr.
Plastic design of structures.
Mayer, M. Die statische Berechnung. v.2. 187p. 1966.
Verlag Ullstein, Berlin. 52 DM.
Structural calculations.
Staldbau-Tagung, Munich, 1966. 187p. 1966. Stahlbau-
Verlag, Cologne.
Steel construction symposium, Munich, 1966.
Steel designers' manual; prepared for the British Steel
Producers Conference in conjunction with the British
Iron and Steel Federation, xiii, 1086p. 1966.
Crosby Lockwood, London. 75s.
Stichting Centrum Bouwen in Staal. Brandveiligheid
staal-constructies. lOOp. 1966. The Center, Rotterdam.
Safety of steel structures with regard to fire.
Symposium on the incorporation of castings in welded
fabrications. Sheffield, 1966; proceedings of the
symposium held by the Institute of Welding, the
British Steel Castings Research Association, the
Sheffield branch of the Institute of British Foundry-
121

men, and the Sheffield Metallurgical and Engineering
Association. 1967. Institute of Welding, London.
20s.
Verein Deutscher Eisenhuttenleute. Stahl im Hochbau.
Handbuch fur Entwurf Berechnung und Ausfuhrung
von Stahlbauten. Ed. 13. 1288p. 1967. Verlag Stahleisen,
Dusseldorf. 84 DM.
Steel in structural engineering. Handbook for design cost
estimates and construction of steel frame structures.
Zentrale fur Gussverwendung. ZGV-Lehrtafeln: Erfahrungen,
Untersuchungen, Erkenntnisse fur das Konstruieren
vom Bauteden aus Gusswerkstoffen, 83p.
1966. Giesserei Verlag, Dusseldorf. 16 DM.
ZGV instructional chart. Experience, investigations, knowledge
for the construction of cast iron raw materials structural
members.
Government Publications
Entwicklung grosser Stahlbeliaelter in Mehrlagen bauweise.
Annual repoit, Jul. 1965-Jul. 1966. 53p. May
1967. Zentralinstitut fuer Forschung und Entwicklung.
Essen. West Germany. N67-35003.* Dep.
Development of multilayer large steel vessels.
Experimental use of high strength reinforcing steel,
by Jere G. Newton, and Larry G. Walker. 74p. May
1967. CFSTL PB 174 964.
Technical basis of steel specifications, by A. I.
and D. Scott. 37p. Sept. 1966. CFSTL N67-39031.
Verein Deutscher Giessereifachleute and Verein Deu
scher Ingenieure. Konstruieren mit Gusswerkstoffen.
xi. 466p. 1966. Giesserei Verlag, Dusseldorf.
Construction with cast materials.
Wanke, J. Stahlrohrkonstruktionen. 386p. 1966. Springer-Verlag.
New York. S19.75.
122

Tubular steel structures. Translated from Stavby i
ocelovych trubek. Prague. 1964.
Wright, John. Universal beam and column design
charts. 194p. 1967. J. Wright, c/o School of Engineering
Science, University of Warwich, Coventry.
123

REVIEW OF IRON A N D STEEL
LITERATURE FOR 1968
A CLASSIFIED LIST OF THE MORE
IMPORTANT BOOKS. SERIALS AND
TRADE PUBLICATIONS ISSUED DUR­
ING THE YEAR; WITH A FEW OF
EARLIER DATE NOT PREVIOUSLY
ANNOUNCED
By MARJORIE McCLELLAND
Science and Technology Department.
Carnegie Library of Pittsburgh
Reprinted trom
"Blast Furnace and Steel Plant"
July 1969 - December 1969
Carnegie Librarv of Pittsburgh
1970

CARNEGIE LIBRARY
OF PITTSBURGH
A free public library donated by
Andrew Carnegie and maintained by
the City of Pittsburgh.
A supplemental appropriation by the
County of Allegheny provides for free
service to County residents.

Review of Iron and Steel Literature for 1968
THIS BIBLIOGRAPHY, die fifty-second annual
Review of Iron and Steel Literature compiled for
the Blast Furnace and Steel Plant, attempts to
list books, technical reports, and pamphlets published
during 1968, with some of earlier date not included
in previous issues.
When possible, the compiler has examined the publications
listed. In some cases they were not accessible,
and the only information regarding them was in technical
journals and publishers' announcements; unfortunately
this information is not always accurate or
complete for bibliographic purposes. Prices are difficult
to verify and may vary from one source to
another so that those listed may be inaccurate in some
cases.
The Science and Technology Department, Carnegie
Library of Pittsburgh, receives the non-secret, research
and development reports issued by the Atomic Energy
Commission (AEC), the National Aeronautics and
Space Administration (NASA), and many other publications
from various government agencies. Complete
translations and abstracts of articles appearing in
numerous foreign language journals are received in
the department.
Designated as a partial depository for atomic energy
reports from Canada, Great Britain, and Denmark, it
also receives publications from Germany, Israel, Italy,
Japan, the Netherlands, Spain, Sweden, and Switzerland.
This list is concerned only with separately published
books, reports, and pamphlets. It is highly selective
and makes no attempt to be all inclusive.

Much of the important literature relating to the
metallurgy and technology of iron and steel, including
raw materials, properties, processing, production, and
applications, appears in current periodicals and journals
which may be approached through guides such
as: Applied Science and Technology Index, British
Technology Index, Chemical Abstracts, Engineering
Index, International Aerospace Abstracts, Journal of
the Iron and Steel Institute, Metals Abstracts, and
other abstracting and indexing services.
Comprehensive indexes of United States government
publications currently available for reference
are the Monthly Catalog of U. S. Government Publications,
Scientific and Technical Aerospace Reports,
Nuclear Science Abstracts, U. S. Government Research
and Development Reports, and the V. S. Government
Research and Development Reports Index.
The Department provides photocopies, accessibility
to reports and journals, and reference assistance in
locating material. Comprehensive lists of books and
journal articles may be found and literature searches
conducted by means of the abstracts, indexes and
bibliographies available in the Department.
The compilation of this bibliography was undertaken
as a project by the Science and Technology
Department.
Daniel R. Pfoutz, Head
Science and Technology Department
Carnegie Library of Pittsburgh

Contents
Key to Availability Designations for
Government Publications and
Doctoral Dissertations 6
Iron and Steel Industry 7
Metallurgy 14
Ores; Ore Preparation 37
Extraction and Refining 39
Refractories 46
Foundry 46
Mechanical Working 50
Powder Processing 57
Heat Treating 58
Joining 60
Cleaning. Coating, Finishing 68
Metallography 71
Transformations 74
Properties 77
Atomic and Nuclear Physics 95
Corrosion 102
Inspection and Control 114
Products and Ports 125
Design and Construction 127

Key to Availability Designations for Government
Publications and Doctoral Dissertations
CAN
For sale by the Scientific Document Distribution Office,
Atomic Energy of Canada, Ltd., Chalk River.
Ontario.
CFSTI
For sale by the Clearinghouse for Federal Scientific
and Technical Information. U. S. Dept. of Commerce.
Springfield, Va. 22151. All documents sold by CFSTI.
except a few NASA publications, are priced at $3.00
for a printed copy or $0.65 for a micronegative (microfiche).
Prices for publications available from CFSTI
are not included in the entries unless they differ from
the standard price.
Dep.
Available at U. S. Atomic Energy Commission depository
libraries. A list of these libraries may be found
in issues of Nuclear Science Abstracts.
DTIE
Available from the U. S. Atomic Energy Commission,
Div. of Technical Information Extension, P. O. Box
62, Oak Ridge. Tenn. 37830.
GPO
For sale by the Superintendent of Documents, Government
Printing Office, Washington. D. C. 20402.
HMSO
Available from Her Majesty's Stationary Office, London.
JCL
For sale by the Special Libraries Association Translation
Center. John Crerar Library. 35 West 33rd St.,
Chicago, III. 60616. Prices are stated where known for
fascimile copies (fs) and/or for microfiche (mf) reproductions.
NLL
For sale by the National Lending Library for Science
and Technology, Boston Spa, England.
SWED
AE reports are for sale from Aktiebolaget Atomenergi.
UM *• • Library University Mich. and of Available Mines. Available for 48106. Section, microform 4800 Microfilm, from Prices Forbes Box the copies are 43041. 300 issuing Ave., Publications given (mf). N. Pittsburgh, Stockholm for Zeeb agency. fascimile Dept, Rd.( 43, Pa. Ann copies U. Sweden. 15213.
S. Arbor. (fs) Bur.

IRON AND STEEL INDUSTRY
Allen, James Albert. Studies in innovation in the steel
and chemical industries, x, 246p. cl967. Manchester
University Press, Manchester. 45/-. Kelley. New
York. $10.
Berg, Hans-Jurgen. Marktforschung als Hilfsmittel tinternehmerischer
Entscheidungen in der Stahlindustrie.
324p. 1966. University of Cologne, Cologne.
Dissertation. Market research as an aid to decision making
in the steel industry.
Birch, Alan. Economic history of the British iron and
steel industry, 1784-1879; essays in industrial and
economic history with special reference to the development
of technology, xv. 398p. 1967. Cass, London.
90s.
British Iron and Steel Federation. U. K. iron ami steel
industry uniform cost system. Rev. ed. 2v. 1967. The
Federation. London. £6. 6s.
. Development Co-ordinating Committee. Steel
industry; the stage 1 report of the Development Coordinating
Committee. 139p. 1966. The Federation,
London.
British Iron and Steel Research Association. Aid to the
selection of mechanical equipment for steelworks
automatic control systems, 39p. 1967. The Association,
London. (PE/BE/32/67). 10s.
. Plant design and maintenance. Conference
report. 1967. The Association, I-ondon. (PE/Conf.
Proc/8/67). £3.3s.
Conference held at Eastbourne, March 23-25, 1966.
Clarke, Mary Stetson. Pioneer iron works. 80p. 1968.
Chilton, Philadelphia. Pa. $4.25.

Eisen- und Stahlindustrie in Nordrhein - Westfalen
1958-1966. S5p. 1967. Statistichen Landesamt Nordrhein-Westfalen,
Dusseldorf. (Bcitrage zur Statistik
des Landes Nordrhein-Westfalen, v.233). 4 DM.
Iron and steel industry in Nordrhein-Westfalen 1958-1966.
European metals directory. 375p. (1967). Quin Press,
London. £3.
Fell, Alfred. Early iron industry of Furness and district.
483p. 1968. Cass, London. £6/6/-.
Originally published in 1908.
Geleji, Alexander. Forge equipment, rolling mills and
accessories. 847p. 1967. Akademiai Kiado, Budapest.
S24.
English translation of German monograph published in
1961.
Greene, David G. Steel and economic development;
capital output ratios in 3 Latin American steel plants.
124p. 1967. Michigan State University Graduate
School of Business Administration, East Lansing.
Mich. (MSU international business and economic
studies). $4.50.
Griffiths. Samuel. Guide to the iron trade of Great
Britain. 504p. 1967. David and Charles. Newton
Abbot (Devon). England. 75s.
Hashimoto, t'ichi. Die Eisen- und Stahlindustrie in
Japan. Stand der Erzeugung und Technik; Einsatz
der Forschung; 7.ukunftige Enttvicklung. 62p. 196S.
Westdcutscher Verlag, Cologne. (Arbeitsgemeinschaft
fiir Forschung des Landes Nordrhein-Westfalen,
v.178).
The iron and steel industry in Japan. The state of production
and technology: the extent of research; future developments.

Haus der Technik. Prozessrechner in Bergbau und
Huttenwesen; Vortragsreihe vom 10 Mai 1966 im
Haus der Technik, Essen. 61p. 1966. Vulkan-Verlag,
Essen. (Vortragsveroffentliehungen. Haus der Technik,
v.98). 18.80 DM.
Computer methods in mining and metallurgy.
Hindustan Steel Ltd. Statistics for iron and steel in
India — 1966. 434p. (1967?). The Company, Ranchi,
India. $6.
International Congress on Coke in the Iron and Ste
Industry, Charleroi, September 19-22, 1966. 543p.
1967. Centre National de Recherehes Metallurgiques,
Liege. 1000 Belgian fr.
International Iron and Steel Institute. Annual con
ference (1st), Nov. 1967. 69p. 196S. The Institute,
Brussels. $4.
Iron ami steel annual statistics for the United Ki
dom, vii, 164p. (1968). Iron and Steel Statistics
Bureau, London. 15/-.
Iron and Steel Institute. Energy management in iro
and steelworks; papers and discussions from the
meeting of the Iron and Steel Engineers Group of
the Iron and Steel Institute.. .4-5 April 1967. 359p.
1968. (Iron and steel institute publication no. 105).
£5.
. List of members. 116p. 1968. The Institute,
London. 63/-.
Corrected to January 31, 1968.
Kohler, H. W. Walzstahlkontore Neuartige Vertriebs-
Investitions - und Produktionsgemeinschaften der
Deutschen Stahlindustrie. 210p. 1967. Verlag Stahl-

eisen Dusseldorf. (Schriftenreihe der Wirtschaftsvereinigung
Eisen-und Stahlindustrie zur Wirtschafts-und
Industriepolitik, v.8).
The rolled steel industry, new sales, investment and production
companies of the German steel industry.
Lassman, Gert. Die Kosten- und Erlosrecftnung als Instrument
der Planung und Kontrolle in Industriebetrieben.
Ed. by Bctriebswirtschaftliches Institut der
Eisenhuttenindustrie. 168p. 1968. Verlag Stahleisen,
Dusseldorf. 22 DM.
The cost and profit statement as an instrument of planning
and control in engineering operations.
Menges, G., and J. Gossman. Okonometrisclie Untersuchungen
der Preisentwicklung in der Bundesrepublik
Deutschland. 179p. 1968. Verlag Stahleisen,
Diisseldorf. (Schriftenreihe der Wirtschaftsvereinigung
Eisen- und Stahlindustrie zur Wirtschafts- und
Industriepolitik. v.9). 12.50 DM.
Economic study of price trends in West Germany.
Metal statistics, 1968. Ed. 61. 432p. 1968. American
Metal Market Co.. Somerset, N. J. $5.
Oakeshott, Wulstan d' Ivry. New battle for steel. 23p.
1968. Aims of Industry. London. 2/-.
Organization for Economic Co-operation and Development.
Iron and Steel Special Committee. Iron
and steel industry. 145p. 1967. HMSO. 21/-.
Steel industry in 1966 and trends in 1967.
Ozdogan, Ruhi. Die Eisen- und Stalilindustrie im
Industrialisierungsprozess der Turkei. Eine Untersuchung
uber die gegenwartige Stellung und zukunftige
Entwicklung der Eisen- und Stahlindustrie
der Turkei und ihrer Eisenerzgrundlagen. 251p.
1967. Technische Hochschule. Clausthal.
10

Dissertation. The iron and steel industry in the industrialization
process of Turkey, A study of the current situation
and future development of the iron end steel industry of
Turkey and its iron ore resources.
Scrivenor, Harry. History of the iron trade. Ed. 2. viii,
327p. 1967. Cass, London. 74/-.
Originally published, London, 1854.
Smiles, Samuel. Industrial biography: iron workers and
tool makers; a reprint of the 1863 edition with additional
illustrations and a new introduction by L. T.
C. Rolt. 342p. 1967. David and Charles, Newton
Abbot (Devon). 50/-.
Smith, Alan R. Air pollution; a survey, carried out for
the Society of Chemical Industry, into the causes,
incidence and effects of air pollution, x, 203p. 1966.
Pergamon, Long Island City, N. Y.
Smith, Cyril Stanley, ed. Sources for the history of the
science of steel 1532-1786. xvi, 357p. 1968. Society
for the History of Technology, London, and M.I.T.
Press, Cambridge, Mass. (Society for the history of
technology monograph no. 4). £5/12/-.
Statistisclies Jahrbuch der Eisen- und Stahlindustrie
fur 1967. 324p. 1968. Verlag Stahleisen, Dusseldorf.
Statistical yearbook of the iron and steel industry.
Steel castings directory 1967. 62p. 1967. Indian Engineering
Association, Calcutta. RS.5.
Strauss, Werner. Industrial gas cleaning; principles
and practice of the control of gaseous and particulate
emissions, xix, 471p. 1966. Pergamon, New York.
$15.
Verein Deutscher Eisenhuttenleute. Liste der in der
Bundesrepublik Deutschland hergestellten Eisen-
ii

werkstoffe. Ed. 2. vii, 436p. 1967. Verlag Stahleisen,
Dusseldorf. 68 DM.
Catalog of manufactured iron and steel products in the
Federal Republic of Germany.
. Stahleisen-Kalender 1968. 320p. 1967. Verlag
Stahleisen, Dusseldorf. 7.50 DM.
Iron and steel yearbook.
Wistreich, J. G. Automation in the iron and steel
dustry. 13p. 1967. British Iron and Steel Research
Association, London. (PE/B/22/67).
Government Publications
Case and Company, Inc., Cleveland (Ohio). Redevelopment
study of the Greater Pittsburgh foundry
industry. Phase II and III. The workshop sessions.
90p. July 1967. CFSTI: PB-176 512.
Economic study of the foundry industry.
Northeastern University. Bureau of Business and Ec
onomic Research. Mecltanization and manpower m
gray-iron foundries, by Dean S. Ammer. 240p. Sept.
1965. CFSTL PB-177 349.
U. S. Bureau of the Census, Suitland (Md.). Curren
industrial reports: commercial steel forgings, 1966.
2p. Dec. 1967. The Bureau. (Series MA-33C(66)-1).
. Current industrial reports: inventories of steel
mill sliapes, summary for 1967. 3p. July 1968. The
Bureau. $0.15.
. Current industrial reports: iron and steel
foundries and steel ingot producers, 1966, report on
products shipped and materials used, iii, 16p. Feb.
1968. The Bureau. (Series M33A(66)-13). $0.15.
12

. Current industrial reports: steel mill products,
1966. 16p. Feb. 1968. The Bureau. (Series MA-33B
(66)-l).
U. S. Congress. Senate. Finance Committee, Washington
(D. C). Steel imports, staff study, by Robert
M. Weidenhammer and others, xxix, 523p. Dec.
1967. GPO. $1.50.
U. S. Federal Water Pollution Control Administrati
Washington (D. C). Cost of clean water, v.3: industrial
waste profiles, no. 1: blast furnaces and steel
mills. lOOp. 1968. GPO. $0.60.
U. S. Joint Publications Research Service, Washing
(D. C). East European materials industries. Translations
no. 407. 46p. Nov. 1967. CFSTI: JPRS-43247.
Analysis of demand for structural steel and review of
steel industry in Hungary.
. USSR industrial development: metallurgy and
minerals no. 76. 7p. Nov. 1967. CFSTI: JPRS-43423.
Translated from the Russian.
. USSR industrial development: metallurgy
and minerals no. 79. 26p. Dec. 1967. CFSTI: JPRS-
43608.
. USSR industrial development: metallurgy and
minerals no. 81. 16p. Dec. 1967. CFSTI: JPRS-
43797.
U. S. Bureau of Labor Statistics, Washington (D. C
Employee earnings in basic iron and steel, Sept.
1967, advance tabulations. 9p. Apr. 1968. The Bureau,
Washington, D. C.9
. International comparison of unit labor cost in
iron and steel industry, 1964: United States, France,
13

Germany, United Kingdom, by David A. Weiss, viii,
64p. 1968. (BLS bulletin no. 1580). GPO. $0.40.
U. S. Bureau of Mines, Washington (D. C). Iron and
steel scrap survey in Illinois, Indiana, Iowa, Michigan,
Minnesota and Wisconsin, by Walter Pajalich.
54p. (1967). (Information circular no. 8342). GPO.
$0.35.
. Minerals yearbook 1966. V. 1-2. Metals, minerals
and fuels, xi, 1352p. 1967. GPO. $5. Dep.
-. Minerals yearbook 1966. V.3. Area reports:
domestic. 891p. 1967. GPO. $3.75. Dep.
—. Slag-iron and steel, by William R. Barton. 6p.
(1968). GPO. $0.05.
Preprint from Minerals Yearbook, 1967.
U. S. National Bureau of Standards, Office of Commodity
Standards, Washington (D. C). Packaging,
marking, and loading methods for steel products for
domestic shipment. l20p. Apr. 1962. CFSTI: SPR-
R-247-62.
Includes Amendments 1-3 published from Dec. 1962 to
Jan. 1967.
U. S. Public Health Service, Washington (D. C). Air
pollution aspects of iron and steel industry, by John
J. Schueneman and others. 138p. June 1963. (Environmental
health series publication no. 999-AP-l).
Available from Publications Office, Robert A. Taft
Sanitary Engineering Center. 4676 Columbia Parkway,
Cincinnati. O. 45226.
METAUURGY
Adda, Y., and L. Philibert. Le diffusion dans les
solides. 2v. 1966. Institut National des Sciences et
Techniques Nucleases, Saclay, France. 212 Fr. fr.
Diffusion in solids.
14

Akademiia Nauk SSSR. Institut Metallurgii. Internal
friction in metals and alloys, ed. by V. S. Postnikov
and others, x, 266p. 1967. Consultants Bureau, New
York. $27.50.
Translated from the Russian; published in Moscow, 1966.
American Iron and Steel Institute. Regional technical
meetings, 1967. 399p. 1968. The Institute, New
York.
American Society for Metals. ASM thesaurus of metallurgical
terms. (8), 244p. 1968. The Society, Metals
Park, Ohio. $15.
American Society for Testing and Materials. Effects of
residual elements on properties of austenitic stainless
steels; a symposium presented at the 69th meeting,
American Society for Testing and Materials, Atlantic
City, June 26-July 1, 1966. 136p. 1967. The
Society, Philadelphia. Pa. (Special technical publication
no. 418). $7.25.
Argall, George O., Jr., ed. International glossary of
technical terms. 266p. (1968). World Mining, San
Francisco. $20.
Includes most commonly used terms in geology, mining,
extraction, refining, etc. English, Swedish, German, French
and Spanish.
Arkharov, V. I., and K. M. Gorbunova, eds. Surface
interactions between metals and gases, viii. 163p.
1966. Consultants Bureau. New York. $25.
Bailey, Alan Robert. Structure atul strength of metals.
122p. 1967. Metallurgical Services Laboratories Ltd.,
Betchworth, Surrey (England). £1.12.0.
. Textbook of metallurgy. Ed. 2. Reprint. 561p.
1968. Macmillan, London. 20s.
15

Bailey, Francis Walter John. Fundamentals of engineering
metallurgy. Ed. 3. xii, 198p. 1965. Cassell,
London. 21/-.
Bain, E. C, and H. W. Paxton. Les elements oVaddi-
Hon dans lacier. 270p. 1968. Dunod, Paris.
French translation of American publication. Alloying elements
in steel. 1966.
Baker, H. Wright. Modern workshop technology, pt. 1.
Materials: primary and intermediate. Ed. 3. viii,
792p. 1966. Macmillan, London. £3 3s.
Battelle Institute Materials Science Colloquia (1st),
Geneva and Villars, 1966. Phase stability in metals
and alloys, edited by Peter S. Rudman and others.
xiv, 594p. 1967. McGraw-Hill, New York. $21.50.
Battelle Institute Materails Science Colloquia (2d),
Seattle (Washington) and Harrison (British Columbia),
May 1-6, 1967. Dislocation dynamics, xxiii,
776p. cl968. McGraw-Hill, New York. $25.
Benser, E. Stahl und Eisengusslegierungen. 2v. 1967.
VEB Deutscher Verlag fur Grundstoffindustrie,
Leipzig. V.l, 4.35 DM; V.2, 5.60 DM.
Steel and cast iron alloys.
Bilby, B. A., and others. Modern theory in the design
of alloys. 107p. (1967). Uiffe. London. 32s.6d.
Boeck, H. Beitrag zur qualitativen Verbesserung unberuhigter
kaltgewalzter Tiefziehbleche unter besonderer
Berucksichtigung der Alterung. 56p. 1967.
Technische Hochschule, Clausthal.
Dissertation. Contribution on qualitative improvement
of rimmed, cold rolled sheet metal with particular regard
to aging.
British Iron and Steel Research Association and the
16

Iron and Steel Institute. Sfrotig tough structural
steels; proceedings of the joint conference... at
Scarborough, Apr. 4-6, 1967. iii, 256, 24p. 1967. Iron
and Steel Institute, London. (Publication no. 104).
£7.
Cain, William McCandlcss, III. Temperature and
strain rate dependence of the deformation characteristics
of austenitic stainless steels, 62p. 1967.
UM: Order no. 67-16063.
Dissertation. Case Institute of Technology. Cleveland,
Ohio.
Cliffe, D. R. Technical metallurgy, x, 414p. 1968. Edward
Arnold, London. 45/-.
Colombier. Louis, and Joseph Hochmann. Stainless
and heat resisting steels; translated by Scripta Technics!,
Ltd. xix. 545p. 1967. Edward Arnold, London.
£7.
Originally published as Aciers inoxydablcs aciers relraclaires.
Ed. 2. Dunad, Paris, 1965.
Commonwealth Mining and Metallurgical Congress
Australia and New Zealand (8th). 8v. 1965. Australasian
Institute of Mining and Metallurgy, Melbourne.
Conference on the Thermodynamic Properties of Materials
(1st), University of Pittsburgh, 1964. Applications
of fundamental thermodynamics to metallurgical
processes. 424p. 1967. Gordon & Breach,
New York. $26. (pa. $12).
Coupette, Werner. Die Vacuumbehandlung des flussigen
Stahles. 176p. 1967. Lang, Wiesbaden. 33
DM.
The vacuum processing of molten steels.
17

Dorlot, J. M. Le vieillissement apres ecrouissage dalliages
fer-carbone. 117p. 1967. Centre National de
Recherehes Metallurgiques, Brussels. 500 Belgian fr.
Ageing after work hardening of iron-carbon alloys.
Driessche, E. F. van den. Fysische metaalkunde: metallografie
en thermische behandelingen. 223p. 1967.
Standard Uitgeverij, Antwerp.
Physical metallurgy: metallography and heat treatments
Dubrov, N. F.. and N. I. Lapkin. Elektrotechnicheskie
stali. 384p. 1963. Metallurgizdat, Moscow. 1 R.
40 K.
Electro-technical steels.
Etewa, M. Sami. Der Einfluss der Zusatzelemente auf
die Aktivitat des Schwefels in kohlenstofffreiem
sowie in kohlenstoffhaltigem Eisen bei 1550°C. 47p.
1967. Technische Hochschule. Aachen.
Dissertation. The influence of alloying elements on the
activity of sulfur in carbon free as well as carbon containing
iron at !550°C.
Evsecv, A. M., and G. F. Voronin. Termo dinamika i
struktura zhidkikh metallicheskikh splavov. 131p.
1966. Izdatel'stvo Moskovskogo Universiteta, Moscow.
52 K.
Thermodynamics and structure of molten metal alloys.
Farris, Robert Eugene. Interfacial reactioits resulting
from precision casting chrome steel in zircon molds.
115p. 1966. Illinois University, Urbana. III. UM:
Order no. 67-6607. $5.60 (fs). $3 (mf).
Dissertation. Illinois University. Urbana, III.
Felbeck, David K. Introduction to strengthening
mechanisms, x, 146p. cl96S. Prentice-Hall, Englewood
Cliffs, N. J. $6.95.
Feltham, P. Deformation and strength of materials.
135p. 1966. Buttcrworths, London. £1 5s.
18

Fritzsche, C. Worterbuch des Hutten- und Walzwerkwesens.
Russisch-Deutsch. Ed. 3. n.p. 1967.
VEB Verlag Technik, Berlin. 33 MDN.
Dictionary of metallurgy and rolling. Russian-German.
Geleji, Alexander. Bildsame Formgebung der Metalle;
Theorie, Experiment und Amvendung. Ed. 2. xvi,
865p. 1967. Akademie-Verlag, Berlin. 115.50 DM.
Plastic deformation of metals; theory, experiment and
applications.
Gerhardt, A. Entwicklung einer Methode zur Scltnellbestimmung
des Stickstoffgehaites von Stahlen nach
dem Vakuumschmelzverfahren unter besonderer
Berucksichtigung der Metallurgischen Vorgange bei
der Entgasung Kohlenstoffgesattigter Eisenschmelzen.
160p. 1965. Technische Universitat, Berlin.
Dissertation. Development of a method for rapid determination
of the nitrogen content of steels after vacuum
melting with special regard to the metallurgical processes
in the degassing of carbon saturated iron melts.
Graf, Dieter. Diffusion von Eisenbegleitern in flussigem
Eisen. 42p. 1968. Technische Hochschule,
Aachen.
Dissertation. Diffusion of iron inclusions in liquid iron.
Gray, Hugh R. Hydrogen embrittlement of maraging
steel. 68p. 1967. UM: Order no. 67-16074. $3.80 (fs).
$3 (mf).
Dissertation. Case Institute of Technology. Cleveland,
Ohio.
Greenough. A. P. Interfacial cohesions. 38p. Inter-
Service Metallurgical Research Council, London.
18s.6d.
Groenveld, T. P. High-strength steels. 2p. 1967. Battelle
Memorial Institute, Columbus, Ohio. (DMIC
review).
19

Gulyaev, A. P., and N. A. Kozlova. Influence of delta
ferrite on the stability of austenite and the properties
of stainless steel at subzero temperatures. 8p. 1968.
Brutcher, Altadena, Cal. (HB-7425). $4.80.
Translated from the Russian.
Gulyaev, A. P., and others. Vysokoproclinye armaturnye
stali. 139p. 1966. Metallurgiya, Moscow. 41 K.
High-strength reinforcing steels.
Heisterkamp, F. Uber die Diffusion des Kohlenstoffs in
Flussigen Eisen-Kohlenstoff-SchwefeUtnd Eisen-
Kohlenstoff-Silizium-Legierungen. 49p. 1965. Technische
Universitat, Berlin.
Dissertation. Diffusion of carbon in liquid iron-carbonsulphur
and iron-carbon-silicon alloys.
Higgins, R. A. Engineering metallurgy. Part 1: Applied
physical metallurgy. Ed. 2. xii, 467p. 1968.
English Universities Press. London. 30s.
Hopkins, A. D. Training of professional metallurgists.
230p. 1967. Lancaster University, Bailrigg, England.
(Lancaster studies in higher education no. 2).
fills.
Hosick, William LeRoy. Effect of precipitation on
orientation in low-carbon steels. 172p. 1966. UM:
Order no. 67-19S8. $8 (fs). $3 (mf).
Dissertation. Cincinnati University, Cincinnati, Ohio.
Houck, Charles Eugene. Effects of orientation and domain
configuration on the magnetostriction of Supermendur.
93p 1966. UM: Order no. 67-4868. $4.80
(fs). $3 (mf).
Dissertation. Lehigh University, Bethlehem. Pa.
Hind, Paul S. Metallic materials; an introduction to
metallurgy, xxi, 3Slp. Holt, Rinehart and Winston.
New York. $9.
20

Institution of Metallurgists. Modern theory in the design
of alloys. 107p. 1967. Iliffe, London.
Irani, J. J., and G. Tither. Controlled processing
low-carbon structural steels. 12p. 1967. British Iron
and Steel Research Association, London. (MG/A/
SO/67).
Irani, J. J., and others. Observations on the reco
and recrystallisation processes in steel. 14p. 1968.
British Iron and Steel Research Association, London.
(MG/C/31/68).
Iron and Steel Institute. Optimization of steel pr
yield; proceedings of the Conference on Optimization
of Steel Product Yield held at tlte annual general
meeting of the Iron and Steel Institute, May
3-4, 1967. 122p. 1967. The Institute, London. (Publication
no. 107) £5.
Ivanova, Vera Semenovna, and L. K. Gordienko. New
ways of increasing the strength of metals, xvii, 90p.
1968. Iron and Steel Institute, London. (Publication
no. 109). £6.
Translated from the Russian.
Kachanov, N. N. Prokalivaemost stali. 251p. 1964.
Metallurgiya, Moscow. 92 K.
Hardenability of steel.
Kastanek, O. Problems of increasing tlte toughness of
cast tools made from 9% tungsten high-speed steel.
15p. 1967. Iron and Steel Institute, London. (BISI-
5645). £4.
Translated from the Czech.
Kazamovskii, D. S. Vliyonie mysh'yka, fosfora i ugleroda
na svoistva stali. 295p. 1966. Metallurgiya, Moscow.
1 R. 14 K.
21

The effects of arsenic, phosphorus and carbon on the
properties of steel.
Kienzle, Otto, and Klaus Mietzner. Atlas umgeformter
metallischer Oberflachen. 186p. 1967. Springer-Verlag,
New York. 78 DM.
Atlas of transformed metollic surfaces.
Kiessling. Roland. Non-metallic inclusions in steel,
(part 3). x. llSp. 1968. Iron and Steel Institute,
London. (Publication no. 115). 60s.
Koch, Klaus. Die Gleicltgewichte zwischen Eisenschmeltzen
und Schlacken des Systems CaO-FeOD-
PrOi-SiOi bei 1600"C. 34p. 1967. Technische Hochschule,
Clausthal.
Dissertation. Equilibrium between molten iron and slag
in systems of CaO-FeO„-PrO,-SiO, at 1600°C.
Lakhtin, I. M. Y. Engineering physical metallurgy.
471p. 1965. Gordon and Breach, New York. $14.50.
Moll, Richard Allen. Impurity effects in iron base weld
metal. 97p. 1966. UM: Order no. 67-4874. $5 (fs).
$3 (mf).
Dissertation. Lehigh University, Bethlehem, Pa.
Moss, John Barry. Science and metallurgy for students
of welding. 2v. 1967. Butterworths, London, v.l,
18/-. v.2, 28/-.
Nutt, Merle C. Principles of modern metallurgy, 608p.
1968. Merrill. Columbus, Ohio. $10.95.
Ormandy, P. G. Introduction to metallurgical laboratory
techniques. 248p. 1968. Pergamon, Long Island
City, N. Y. $5.
Parker, Roger Hill. Introtluction to chemical metallurgy.
361p. 1967. Pergamon, Long Island City,
N. Y. $7.50. $6 (pap).
22

Pearson, T. F. Technology of ferrous alloys for ambient
and low-temperature use. 240p. 1968. Newnes,
London. 70s.
Pepe, Joseph J. Mechanism of heat-affected-zone hot
cracking in 18-Ni maraging steel. 106p. 1966. UM:
Order no. 67-9295. $5.40 (fs). $3 (mf).
Dissertation. Rensselaer Polytechnic Institute, Troy, N. Y.
Peterson, John Adolf. Internal friction and embrittlement
in hijdrogen cltarged austenitic steel. 74p.
1967. UM: Order no. 67-16095. $4 (fs). $3 (mf).
Dissertation. Case Institute of Technology, Cleveland,
Ohio.
Petty, E. R. Physical metallurgy of engineering materials.
320p. 1968. Allen and Unwin, London. 45s.
($6).
Pisek, Frantisek. Nauka o moterialu. 1. Nauka o koveclu
1 svazek. 632p. 1966. Academia, Prague.
Science of materials, v. 1, pt. I. General metallurgy.
Rachmantio, H. Untersuchung uber die Magnetische
Alterung Niob- Titan- und Zirkon-Haltiger Weicher
Stahle. 80p. 1967. Technische Universitiit, Berlin.
Dissertation: Experiments on magnetic aging in niobium,
titanium and lirconium-containing soft steels.
Razim, C. Einfluss von Restaustenit und Netzformigen
Karbiden auf die Neigung zur Grubchenbildung in
Einsatzgeharten Stahlen. 99p. 1967. Stuttgart Technische
Hochschule, Stuttgart.
Dissertation. Effect of residual austenite and reticular carbides
on the tendency to pitting of case-hardened steels.
Renner, Klaus. Untersuchungen zum Stoffubergang
des Mangans und des Schwefels zwisclten flussigem
Eisen und flussiger Schlacke bei verschiedenen Ver-
23

fahrensweisen. 54p. 1967. Technische Hoehschule,
Aachen.
Dissertation. Research on the transition substances of
manganese and sulfur in liquid slag, by various methods.
Rhee, Peter Chang-Hee. Die Beeinflussung der
Gleicligewichte zwischen Kohlenstoff und Sauerstoff
im flussigen Eisen durch Nickel, Chrom und
Silizkim im Temperaturbereich des ftussigen Stahls.
38p. 1967. Technische Hochschule, Aachen.
Dissertation. The modification of the equilibrium between
carbon and oxygen in molten iron by means of nickel,
chromium and silicon in the temperature range of molten
steels.
Richman. M. IL An introduction to tlte science of
metals. 400p. 1967. Blaisdell Publishing Co., Waltham,
Mass. $11.50.
Rohdc, Walter. Ausscheidungsverlialten und mechanische
Eigenschaften verschiedener warmfester Legierungen
mit Kobaltgehalten bis 35%. 177p. 1967.
Technische Hochschule, Aachen.
Dissertation. Precipitation behavior and mechanical properties
of various high-temperature alloys with a cobalt
content up to 35%.
Roser, Walter Ray. Investigations of ordering phenomena
in austenitic alloys. 91p. 1967. UM: Order no.
67-16512. $4.60 (fs). $3 (mf).
Dissertation. Arizona University, Tucson, Ariz.
Ross, Robert B. Metallic materials, xviii, 936p. 1966.
Chapman & Hall, London. £6/6/-.
Russell. Robert Joseph. Strain induced reversal of martensile
to austenite in Fe-Ni-C alloys. 200p. 1967.
UM: Order no. 67-16704. $9 (fs). $3 (mf).
Dissertation. Purdue University, Lafayette. Ind.
24

Schulze, Gustav E. R. Metallpliysik. 458p. 1967. Akademie-Verlag,
Berlin. 48 MDN.
Metal physics.
Seminar on Energetics in Metallurgical Phenomenon.
V.3, ed. by William M. Mueller. 193p. 1967. Gordon
and Breach, New York. $12.50.
Shively, Jon Henry. Hydrogen permeability in a stable
austenitic stainless steel. 77p. 1967. UM: Order no.
67-16102. $4.20 (fs). $3 (mf).
Dissertation. Case Institute of Technology, Cleveland,
Ohio.
Simons, Eric N. Outline of metallurgy. 1968. Frederick
Muller, London. 50s.
Sittig, Marshall. Inorganic chemical and metallurgical
process encyclopedia, 1968. 8S3p. 1968. Noyes Development
Corp., Park Ridge, N. J. $35.
Slade, Edward. Metals in the modern ivorld: a study
in materials development. 192p. 1968. Doublcday,
Garden City, N. Y. $5.95.
Soeicte de Chimie Industrielle and Chambre Syndicale
des Producteurs d'Aciers fins et speciaux. Colloque
regional (We): Les possibilitcs d'emplois des aciers
fins et speciaux dans la chimie. 268p. 1967. The
Authors, Lille and Paris
Fourth regional symposium on the possibilities for the
use of high-grade and special steels in chemistry.
Sokolovskii, P. I. Armatumyc stali. 208p. 1964. Metallurgiya,
Moscow. 80 K.
Reinforcing steels.
. Malouglerodistye i Nizkolegirovannyc stali.
216p. 1966. Metallurgiya, Moscow. 80 K.
Low carbon and low alloy steels.
25

Stainless Steel Development Association. Introducing
stainless steel. 20p. (1968?). The Author, London.
Stanley, Delmar O'Daniel. Effect of solidified structures
on mechanical properties of cast high temperature
alloys. 125p. 1967. UM: Order no. 67-16104.
$6 (fs). $3 (mf).
Dissertation. Case Institute of Technology, Cleveland,
Ohio.
Sun. Richard Ching-an. Study of the condition of boron
in alpha iron by internal friction. 146p. 1967.
I'M: Order no. 67-524. $7 (fs). $3 (mf).
Dissertation. Wisconsin University. Madison, Wis.
Techniques of metals research, v.l, pt. I: techniques
of materials preparation and handling, ed. by R. F.
Bunshah. 385p. 1968. Wiley. New York. $16.95.
Thier, Hermann. Der Einfluss von Stickstoff auf das
Ausscheidungsvcrhalten des austenitischen Chrom-
\'ickel-Stahles X5 CrNiMo 1713. 63p. 1967. Technische
Hochschule. Aachen.
Dissertation. The influence of nitrogen on the precipitation
behavior of austenitic chrom-nickel-steels X.S CrNiMo
1713.
Vasipari Kutato Intezet. A Vasipari Kutato Intezet
Eokonyve. V.3. 7S8p. 1967. Akademiai Kiadno.
Budapest.
Communications of the Research Institute for Ferrous
Metallurgy.
Vygen, Johann Peter. Der Oxidationsgrad und die
elektrische Leitfahigkeit im System FcO-Fe^Ot-
CaO-SiO, bei 1600*6. 63p. 1967. Technische Hochschule,
Clausthal.
Dissertation. The degree of oxidation and the electrical
conductivity in the system FeO-FerOj-CaO-SiO, at 16O0°C.
26

Watson, Hal, Jr. Effects of strain-rate and temperature
on the stress-strain cliaracteristics of copper and
iron. 190p. 1967. UM: Order no. 67-14899. $8.60
(fs). $3 (mf).
Dissertation. Texas University, Austin, Tex.
Weber, J. Wasserstoff im Gusseisen. 115p. 1966. Juris
Druck Verlag, Zurich.
Dissertation. Eidgenossische Technische Hochschule, Zurich.
Hydrogen in cast iron.
Wiedermann, G. Der Einfluss des Schwefels bei der
Herstellung von Unberuhigten Tiefziehsonder-Stahten
auf die Wirtschaftlichkeit. 64p. 1965. Technische
Universitiit, Berlin.
Dissertation. The effect of sulphur on the economy of
the production of rimming special deep-drawing steels.
Wiemer, Hans-Eike: Untersuchungen im System FeOu-
MnOa-CaO-P£>i an Luft bei 1600°C. 23p. 1967.
Technische Hochschule, Clausthal.
Dissertation. Research on the system FeO--MnO.,-CaO-
PiOs in air at 1600°C.
Wojcik, Witold Marian. Mechanism of interface reactions
between silica and aluminum dissolved in
iron melts. 75p. 1966. UM: Order no. 67-9734. $4
(fs). $3 (mf).
Dissertation. University of Pittsburgh, Pittsburgh, Pa.
Zief, Morris, and William R. Wilcox. Fractional solidification,
xvi, 714p. 1967. Edward Arnold, I^ondon.
230s. Stechert-Hafner, New York. $28.75.
Materials in general, but some chapters on metals.
Zupp, Richard Robert. Influence of substitutional solutes
on the carbon activity in austenitic, ternary,
iron-base alloys. 180p. 1966. Stanford University,
Stanford, Calif. UM: Order no. 67-4457. $8 (fs).
$3 (mf).
Dissertation. Stanford University, Stanford, Calif.
27

Government Publications
Acta Polytechnica Scandinavica, Stockholm (Sweden).
Carbon strengthening of martensite in relation to
thermally activated deformation, by O. Krister Kallstrom.
29p. 1967. CFSTI: PB-177 683.
. On the recrystallization of austenite in connection
ivith hot-working in slightly hypoeutectoid
carbon steel, by Toivo Jormalinen and Juha Pietikainen.
25p. 1968. CFSTI: PB-179 003.
Zero change in length at the liardening and
austempering of steel, bv Juha Pietikaincn. 33p.
1968. CFSTL PB-179 002.'
Ames Laboratory, Iowa. Sessile drop test to study
ting by liquid metals in metallic systems, by Robert
Craig Maze. 60p. Nov. 1967. CFSTI: IS-T-205.
Dep.
Dissertation. The wetting of 316 stainless steel by leadbismuth
eutectic determined using a sessile drop test.
Argonne National Laboratory, Lemont (111.). Isotope
exchange of Fe in the two-phase system solid metalliquid
slag, by Chi-yun Khan and others. 16p.
CFSTI: ANL-Trans-559. Dep. JCL. $1.60 (fs). $0.80
(mf).
Translated from the Russian. Originally published in 1961.
Atomics International, Canoga Park (Calif.). Biaxial
stress-rupture properties of austenitic stainless steels
in zirconium-getter ed sodium, by W. T. Lee. 40p.
Oct. 1967. CFSTL NAA-SR-12353. Dep.
Boeing Company. Commercial Airplane Division, Renton
(Wash.). Internal friction measurements for the
analysis of hydrogen in steel parts, by S. H. A.
Begemann. 24p. 1968. CFSTL AD-672 217.
28

. Process for increasing the strength and toughness
of AFC 77 by austenite grain refinement, by
D. Webster. 24p. Apr. 1968. CFSTI: AD-670 462.
Bristol Aerojet, Ltd., Banwell (England). Chemical
contouring of 18 per cent nickel maraging steel
sheet. 27p. 1967. CFSTL N68-24902.
California University. Lawrence Radiation Lab-, Li
ermore (Calif.). Diffusion of iron in various ferrous
alloys, by D. Y. F. Lai and R. J. Borg. 6p. Sept. 1967.
CFSTL UCRL-50314. Dep.
. On the metallurgy of electron-beam melting.
Pt, 1. Measurement of steel bath temperature with
an objective color pyrometer, by Fred Esser and
others. 21p. 1965. CFSTI: UCRL-Trans-10215. Dep.
JCL, $2.60 (fs). $1.10 (mf).
-. On the metallurgy of electron-beam melting.
Pt. 2. Volatilization processes in the 200-kw multicliamber
electron-beam furnace, by Gerhardt Scharf
and others. 34p. 1966. CFSTI: UCRL-Trans-10220.
Dep. JCL. $3.60 (fs). $1.25 (mf).
Chantiers dc 1'Atlantique Saint-Na/aire (France).
reactor materials. Quarterly report, Jul. 1-Sept. 30,
1967. 5p. Jan. 196S. CFSTI: N6S-22647.
Investigation of two new steels, MANNESMANN WB 35
and vacuum degassed Mn Mo.
Danish Atomic Energy Commission. Research Establishment,
Riso, Roskildc (Denmark). Metallurgy
department annual progress report for the period
ending March 31, 1967. 42p. July 1967. RISO-151.
Dep.
European Atomic Energy Community, Brussels (Belgium).
Steel program at EUR ATOM — outline of
29

esults obtained in the period 1961 to 1964, adapted
from a compilation in French by J. Sebtile. 231p.
June 1968. CFSTI: EURAEC-1986.
. La zone de la tole influencee tltermiquement
par le soudage. Son importance du point de vue
fragilisation de la cuve en fabrication et en service,
by J. Sebille. 36p. Dec. 1966. CFSTI: EURAEC-
1751. Dep.
The heat-affected zone of the plate and its importance
as regards vessel embrittlement during fabrication and in
service.
France. Commissariat a 1'Energie Atomique, Fontenay-aux-Roses
(France). Reaction des carbures duranium
et de plutonium avec des aciers austenitiques,
by Michel Mouchnino. 38p. Oct. 1967. CFSTI:
N6S-23019.
Reaction of uranium and plutonium carbides with austenitic
steels.
France. Office National d'Etudes et de Recherehes
Aerospatiales, Paris (France). Analyse quantitative
absolue des fortes tcneurs par spectrographie de
masse a etincelles haute-frequence. Application a
lacier inoxydable 18/10, by George Vidal and
others. 27p. 196S. CFSTL N6S-25303.
Absolute quantitative analysis of high concentrations by
high-frequency spark-source mass spectrography. Application
to an 18/10 stainless steel.
Ceni'ral Electric Company, Nuclear Materials and
Propulsion Operation, Cincinnati (Ohio). AEC fuels

Hawker Siddeley Aviation, Ltd., Brough (England).
Chemical contouring of corrosion resisting steels
and of a nickel base alloy, by R. Boler, 37p. Apr.
1967. CFSTI: N68-25289.
Iowa State University of Science and Technology,
Ames (Iowa). Plastic deformation behavior of long
range ordered iron-aluminum alloys, by Harry John
Leamy. 166p. Aug. 1967. CFSTL N68-12710.
Dissertation.
Israel Institute of Technology. Material Mechanics
Laboratory, Haifa. Discontinuous yielding of metastable
austenitic staiidess steel, by J. Baruch and
others. 31p. Aug. 1967. CFSTI: AD-659 368.
Knolls Atomic Power Laboratory, Schenectady (N.
Y.). Study of boron segregation in boron-stainless
steel alloy, by R. F. Dufour. 12p. Sept. 1967.
CFSTI: KAPL-M-673L Dep.
Massachusetts Institute of Technology. Cambridge
(Mass.). Metallurgical structure and the brittle behavior
of steel. Final report 1954-1966, by Morris
Cohen. 32p. May 1968. CFSTL AD-670 574.
. Department of Metallurgy and Materials
Science, Cambridge (Mass.). Research on mechanisms
of alloy strengthening. I. Alloy strengtltening
by fine oxide particle dispersion. 2. Splat cooling
process for alloy development. Semiannual report,
by Nicholas J. Grant. 29p. Doc. 1967. CFSTI: N6S-
18549.
. Department of Metallurgy and Materials
Science, Cambridge (Mass.). Research on mechanisms
of alloy strengthening. Semiannual report,
by Nicholas J. Grant. 18p. June 1968. CFSTI: N68-
30233.
31

. Metallurgy Department, Cambridge (Mass.).
Investigation of solidification of high-strength steel
castings. Interim report, Oct. 1, 1965-Sept. 30,1966,
by M. C. Flemings and others. 97p. Oct. 1967.
CFSTI: AD-661 056.
Sweden. Aeronautical Research Institute of Sweden,
Stockholm. Undersoekningens andamal och omfattning.
43p. (1968). CFSTI: N68-33858. $3.
Fatigue tests on a 5% Cr-steel. English summary.
Technische Hochschule. Institut fiir Technische Mechanik,
Munich (West Germany). Theoretical determination
of fatigue strength at stress concentration,
by Heinz Neuber. 32p. June 1967. CFSTI: AD-670
857.
Techtran Corporation, Glen Bumie (Md.). Infrared
absorption spectra of metal oxides, by Ohiko Kammori
and others. lOp. Feb. 196S. CFSTI: N68-15S68.
Translated from the Japanese.
Texas Nuclear Corporation, Austin (Tex.). Applications
of neutron activation to onstream analysis,
by J. R. Rhodes. 31p. Oct. 1967. CFSTI: ORO-29S0-
17. Dep.
Includes determination of oxygen in steel, silicon in iron.
U. K. National Lending Library lor Science and Technology,
Boston Spa (England). Description of the
creep of metals, with allowance for elastic aftereffect,
by E. A. Khein. Sp. Mav 196S. NLL: RTS-
4546. 7s 6d.
Translated from the Russian.
. Development of high-strength maraging steel,
by J. L. Castagne and Y. Cazin. lip. May 1968.
NLL: Transl. 68/210.
Translated from the French.
32

. Influence of carbon content on fatigue
strength of commercial grades of pure iron, by Max
Hempel and Emil Hillnhagen. 29p. July 1968. NLL:
Transl. 68/183.
Translated from the German.
. Influence of ferrite on the resistance to corrosion
of Cr-Ni stainless steels, by S. Henrickson.
4p. Aug. 1968. NLL: CE-TRANS-4801.
Translated from the Italian.
-. Influence of residual austenite on the strengt
of case-hardened specimens under conditions of fluctuating
stress, by C. Razim. 39p. Mar. 1968. NLL:
TRANS-68/67.
Translated from the German.
-. Influence of structure on hardness and ductility
of constructional steels, by Alois Legat and
Alfred Moser. 12p. July 1968. NLL: Transl. 68/143.
Translated from the German.
-. Nonuniformity of titanium distribution in a
nickel-titanium steel, by A. G. Yakhontov and others.
op. Oct. 1967. NLL: Transl. 67/233.
Translated from the Russian.
-. Possibilities of improving hot-ductility of al
loy steels, by G. Kuhnclt. 24p. July 1968. NLL:
Transl. 68/174.
Translated from the German.
-. Strength and ductility of metals and alloys.
by Ya. V. Mil'man. 29p. June 1968. NLL: RTS-4599.
40s.
Translated from the Russian.
-. Studies of the relationship between fatigue
strength and internal stress distribution in case-
33

hardened steel, by K. Hammer. 8p. Oct. 1967. NLL:
Transl. 67/258. '
Translated from the German.
Study of a Mo-W stainless steel with outstanding
creep properties, by J. DeCroix. 7p. Feb.
1968. NLL: Transl. 67/367.
Translated from the French.
U. K. Royal Aircraft Establishment, Famborough
(England). Concerning tlte question of methods of
reducing the grain size of cast alloy steel by thermal
treatment, by V. D. Sadovskii and others. 26p. Oct.
1967. RAE-LIB-TRANS-1256.*
Translated from the Russian.
U. K. Royal Armament Research and Development Establishment.
Basic Techniques Div., Fort Halstead
(England). Influence of copper, silicon and manganese
on the strengthening mechanisms in a medium
carbon steel, by A. R. Cox. 29p. Nov. 1967.
CFSTL N68-15663.
U. S. Aerospace Research Laboratories, Wright-Patterson
Air Force Base (Ohio). Effect of hydrogen
charging on the Petch relationship for zone-refined
iron. Interim report, by A. M. Adair. 7p. June 1966.
CFSTL AD-660 753.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Certain possibilities of using irradiation for
surface hardening of metals, by P. E. Dyachenko
and others. lOp. Oct. 1967. CFSTI: AD-670 291.
Translated from Che Russian.
. Readily available hydrogen-resistant steel, by
Yu. I. Archakov and I. D. Grebeshkova. 37p. Sept.
34

1967. CFSTI: AD-671 144.
Translated from the Russian.
U. S. Army Materials and Mechanics Research Center
Watertown (Mass.). Literature survey of the effects
of certain minor elements on the properties of nodular
iron, by Edward L. Wyatt and Kenneth D.
Holmes. 19p. May 1968. CFSTI: AD-670 092.
U. S. Joint Publications Research Service, Washing
ton (D. C). East European scientific abstracts: materials
science and metallurgy no. 20. 73p. Dec.
1967. CFSTI: JPRS-43567.
• East European scientific abstracts: materials
science and metallurgy no. 21. 57p. Jan. 1968.
CFSTI: JPRS-43919.
USSR scientific abstracts: materials science
and metallurgy no. 41. 158p. Nov. 1967. CFSTI:
JPRS-43451.
Translated from the Russian.
USSR scientific abstracts: materials science
and metallurgy no. 42. 150p. Nov. 1967. CFSTI:
JPRS-43509.
U. S. Bureau of Mines, Minneapolis (Minn.). Kinetics
of the initial reduction stages of magnetite in
hydrogen, by Tom N. Rushton and S. E. Khalafalla.
32p. Feb. 1968. BM-R1-7080.* *
. Parameters affecting reduction-induration of
unfired magnetite pellets, by R. B. Schluter and
M. M. Fine. 24p. Jan. 1968. BM-RI-7069.**
-. Rare-earth silicide additions to an alloy ste
to increase toughness and ductility by H. A. Tucker
and others. 35p. June 1968. BM-RI-7153."
35

U. S. Bureau of Mines, Pittsburgh (Pa.). Effects of
adding rare-earth silicides, aluminum and cryolite
to molten steel, by R. J. Leary and others. 46p. Mar.
1968. BM-RI-7091.00
Reaction rate of titanium-iron alloys and
titanium trichloride in molten sodium chloride, by
E. K. Kleespies and T. A. Henrie. 14p. (Oct. 1967).
BM-RI-7039.**
U. S. Bureau of Mines, Rolla (Mo.). Effects of cobalt
on precipitation hardening of AM 350 stainless steel,
by Milton M. Tilman. lOp. Apr. 1968. BM-RI-
7121.°"
-. Ferrite control by cobalt additions to a semiaustenitic
stainless steel, by M. M. Tilman. 16p.
Apr. 1968. BM-RI-7107.#*
U. S. National Bureau of Standards. Metallurgy Division,
Washington (D. C). NBS alloy data center:
function, bibliographic system, related data centers,
and reference books, by Gesina L. Carter and
others. 199p. Aug. 1968. GPO: NBS-TN-4&L $1.25.
U. S. Naval Research Laboratory, Washington (D.
C). DSSP program on high-strength materials
(evaluation of an experimental titanium-free maraging
steel). Memorandum report, by Fred R. Stonesifer
and others. 31p. Apr. 1968. CFSTI: AD-670
484.
Deep submergence systems project experimentol titaniumfree
alloy.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). Spectrographic determination of small
quantities of boron in iron and steels by means of
a predispersive spectrometer, by Danh Tran Van
36

and Jacques Ernoult. 15p. Jan. 1966. ORNL-TR-
1339.°
Translated from the French.
Uppsala University. Institute of Physics, Uppsala
(Sweden). Dislocation structure of an austenitic
stainless steel in different stages of fatigue, by O.
Vingsbo and others. 34p. Aug. 1966. UUIP-493.
Dep.
Westinghouse Electric Corporation. Advanced Reactors
Division, Madison (Pa.). Vanadium cladding
alloy development. Quarterly progress report for the
period ending Dec. 31, 1967, by E. C. Bishop and
others. 57p. Jan. 1968. CFSTI: WARD-3791-13.
Dep.
ORES; ORE PREPARATION
American Iron Ore Association. Iron ore news — highlights
of 1967. (1967). The Association, Cleveland,
Ohio.
Financial Post survey of mines, 1968. Ed. 42. 481p.
1968. Financial Post, Toronto.
Grunder, W. Aufbereitungskunde. xvi, 622p. 1965.
Herman Hubner Verlag K G, Goslar, Germany. 96
DM.
Ore preparation.
Haus der Technik. Maiden und Ktassieren mineralischer
Rohstoffe; Tagung vom 19 Januar 1966. 37p.
1966. Vulkan-Verlag, Essen. (Vortragsverbffentlichungen.
Haus der Technik, v.96). 10 DM.
Pulverizing and separation of mineral ores.
Iron and Steel Institute of Japan. World iron ore resources
— general survey. 144p. (1966). The Institute,
Tokyo.
37

Miller, Eugene Willard. Mineral resources of the
United States. 64p. 1967. Rand McNally, Chicago.
$L
Mining year book; incorporating the mining manual,
1968. (82d year). 5, 816p. 1968. Walter R. Skinner,
London. $21.
North, Oliver. Mineral exploration, mining and processing
patents 1967. 279p. (1968). The Author, 812
S. Ode St., Arlington, Va. 22204. $25.
Covers U. S., Conadion and British patents.
Wenzel, W., and H. W. Gudenau. Pelletizing iron ores
using preroasted material. 14p. 1967. Brutcher, Altadena,
Calif. (HB-7233). $9.80.
Translated from the Germon.
Government Publications
Canada. Department of Energy, Mines and Resources.
Geological Survey, Ottawa. Geology of iron deposits
in Canada, v2: iron deposits in the Appalachian and
Grenville regions of Canada, by G. A. Gross, lllp.
1967. Queen's Printer, Ottawa. (Economic geology
report no. 22). $3.
Canada. Department of Energy, Mines and Resources.
Mineral Resources Division, Ottawa. Canadian iron
ore industry, 1966, by V. B. Schneider. 74p. (1968?).
(Mineral information bulletin, MR 89). Queen's
Printer, Ottawa. $1.
Minnesota University. Mines Experiment Station, Mi
neapolis (Minn.) Concentration of nonmerchantable
iron-bearing materials from the Mesabi range.
Final report. 238p. Dec. 1967. CFSTI: PB-177 405.
U. S. Geological Survey, Washington (D. C). Geolog
and ore deposits of Iron River-Crystal FaUs District,
36

Iron County, Michigan, by II. L. James and others.
vi,134p. 1968. (U.S.G.S. professional paper no. 570).
GPO. $3.25.
U. S. Bureau of Mines, Minneapolis (Minn.). Physica
strength of iron ore pellets at elevated temperatures,
by J. L. Reuss and M. M. Fine. 29p. Jan. 1968.
BM-RI-7060."
U. S. Bureau of Mines, Pittsburgh (Pa.). Physical
strength of iron ore pellets at elevated temperatures,
by J. L, Reuss and M. M. Fine. 27p. Jan. 1968.
BM-RI-7060."
Western Australia Geological Survey. Geology of ir
deposits of the Hammersly Range area. Western
Australia, by W. N. MacLeod. 170p. 1966. The Geological
Survey, Perth. (Bulletin no. 117).
. Mineral resources of Western Australia. 83p.
1966. The Survey, Perth.
EXTRACTION AND REFINING
American Institute of Mining, Metallurgical and Petroleum
Engineers. National Open Hearth and Basic
Oxygen Steel Committee. National open hearth and
basic oxygen steel conference (50th), April 10-12,
1967, St. Louis. 260p. cl967. The Institute, New
York.
Arakawa, H„ and R. Iyoda. Pre-reduction of iron sand
in a rotary kiln. 76p. Oct. 1968. Iron and Steel
Institute, London. (BISI-5807). £25.
Translated from the Japanese.
Borggrefe, H. Die Kornverteilung im Abgas vom
Thomas-Konvertern in AbhangigkeH von der Breen-
39

flecktemperatur. 62p. 1967. Technische Universitat,
Berlin.
Dissertation. Particle size in effluent gas from the basic
Bessemer converter in relation to the combustion zone
temperature.
Borowski, K., and others. Decarburisation rate and deearburisation
during the manufacture of steel by
oxygen top blowing, 21p. 196S. Iron and Steel
Institute, London. (BISI-5S78). £5.10$.
Translated from the German.
Forschungsinstitut fiir Roheisenerzeugung Unterwellenhorn.
Neueste Technik auf den Gebieten der Roheisenerzeugung.
Beitrage der Vortragsreihen I-VI,
1960-1965 in Untcrwellenborn. 781p. (1966). The
Institute, Unterwellenborn (Thiir.). 50 DM.
Recent developments in the field of pig iron production.
Ceisler, Jiirgen. Die Gleichgewichte zwischen Eisen
und kalkgesattigten, schwefelhaltigen Eisenoxydulschlackenbei
1400°C und 1600°C. 29p. 1967. Technische
Hochschule, Clausthal.
Dissertation. The equilibrium between iron and lime
saturated, sulfur containing ferrous oxide slag at 1400°C.
and !600°C.
Grundmann, Rolf. Untersuchungen der Gleichgewichte
und Aktivitaten in den Metall- und Schlackcnplwsen
des Systems Eisen-Nickel-Sauerstoff bie
Temperaturen der Stahlerzeugung. 43p. 1967. Technische
Hochschule, Aachen.
Dissertation. Research on the equilibrium and the reactions
in the metal and slag phases of the systems ironnickel-oxygen
at steelmaking temperature.
Grzyb, J. Trial runs in a pilot basic oxygen furnace (at
a steelworks in Poland). 18p. cl966. Brutcher, Altadcna,
Calif. (HB-6677). $19.50.
Translated from the Polish.
40

Horgas, Mihael. Das Aluminium als Reduktionsmittel
bei den Reaktionem ztvischen Eisenschmelzen und
Hochofcnschlackcn im Graphittiegel. 38p. 1966.
Technische Hochschule, Clausthal.
Dissertation. Aluminum as a reducing agent in the reaction
between iron melts and furnace slags in a graphite
crucible.
Husson, G. Equilibria between manganese in the hot
metal ami slags in open hearth furnaces. 21p. 1967.
Iron and Steel Institute, London. (BISI-5436). £6.
Translated from the French.
Institution of Mining and Metallurgy. Advances in extractive
metallurgy; proceedings of a symposium
held in London, April 17-20, 1967. 1023p. 1968. The
Institution, London. $25.
Iron and Steel Engineer. Oxygen steelmaking; a collection
of articles previously published in Iron and
Steel Engineer. 31Sp. Association of Iron and Steel
Engineers, Pittsburgh, Pa. $4.
Iron and Steel Institute. Library and Information Department.
Ironmaking in the blast furnace. 1966.
The Institute. London. 95s.
Kallfelz, Peter L. Das Elektrofliessbett-Verfahren—ein
Beitrag zur Elektroierhuttung. 9Sp. 1967. Technische
Hochschule. Aachen.
Dissertation. Electric fluidized bed procedure — a contribution
on electric smelting.
Kdnig, G., and others. Processes taking place in the
dissolution of hard and soft-burnt lime in the slags
from the basic oxygen furnace. 17p. 1967. Brutcher,
Altadena, Calif. (HB-7264). $12.50.
Translated from the German.
41

Mix. C. Die Entstehung Makroskopischer Einschlusse
im Unberuhigten Stahl und Moglichkeiten ihrer
Vermeidung. 52p. 1966. Technische Universitat,
Berlin.
Dissertation. The occurrence of macroscopic inclusions
in rimming steel and the possibilities of avoiding them.
Muller, Klaus. Untersuchung uber den Temperaturverlauf
in bemhigt vergossenen Staldblochen wdhrend
der Erstarrung, Abkuhlung und Wiedererwarmung
im Tiefofen. 86p. 1967. Technische Hochschule,
Clausthal.
Dis- ertation. Research on the temperature pattern in
killed cast steel ingots during solidification, quenching and
reheating in the pit heating furnace.
Oberhanser, P. G. Scliallintensitatsmessung zur Uberwachung
der Schlackenbildung und die Reaktionmblaufe
beim Aufblasen von reinem Sauerstoff auf
phosphorarmvs Rohrisen. Sip. 1967. Technische
l'ni\ ersitiit. Berlin.
Dissertation. Measurement of sound intensity for the
control of slag formation and the course of the reaction
in the blowing of pure oxygen through low-phosphorus pig
iron.
Pcrlmv, \. I., and M. P. Kwitko. Die Stahlerzeugung
in Sauerstoffkonvcitern. 365p. 1967. VEB Deutscher
Verlag fiir Cjundstoffindustrie, Leipzig. 29.80 MDN.
Steelmaking in oxygon-blown converters.
Popov, D. I. Ekonotniya metalla v staleplavil'nom
proizvodstve. 115p. 1966. Metallurgiya, Moscow.
35 K.
Saving metal in steelmaking.
Prokhorenko. K. K.. and others. Vyplavka i razlivka
kachestvennykh stalei. 201p. 1964. Metallurgiya,
Moscow. 79 K.
The melting and teeming of high-quality steels.
43

Schafer, K. Beitrage zum Verluilten des Schwefels
in Kohlenstoff - Phosphor - Siliziumhaltigen Eisenschmelzen.
102p. 1966. Technische Hochschule,
Clausthal.
Dissertation. Contributions on the behaviour of sulphur in
carbon-phosphorus-silicon-contoining iron melts.
Seeger, Manfred. Untersuchungen uber den Koks-und
Energieverbrauch der Roheisenerzeugung unter besonderer
Berucksicfttigung von Hochofengrosse,
Letstung, Mollerzusammensetzung und Windtemperatur
an Hand eines Mehrstufenmodelles. 58p.
1967. Technische Hochschule, Aachen.
Dissertation. Research on coke and power consumption
in pig iron production with particular regard to blast furnace
size, load, burden composition and blast temperature
by means of a multistage model.
Simon, R. Die Entschwefelung beim Sauerstofffrischen
von Stahlroheisen und Thomasroheisen. 36p. 1967.
Technische Universitat, Berlin.
Dissertation. Desulphurization in oxygen refining of pig
irons for steel and for the basic Bessemer process.
Sladkoshteev, V. T., and others. Kachestvo stali pri
nepreryvnoi razlivke. 174p. 1964. Metallurgiya, Moscow.
53 K.
Quality in steel in continuous casting.
Symposium on Heat and Mass Transfer in Process
Metallurgy; proceedings of a symposium held by
the John Percy Research Group in Process Metallurgy,
London, April 19-20, 1966. ix, 252p. 1967. Institution
of Mining and Metallurgy. London.
Tiwary, Sushil Kumar. Untersuchung der Granalie,.bildung
in der Schlacke bei der Stahlerzeugung an
Hand von Modellversttchen. 56p. 1967. Technische
Hochschule, Aachen.
43

Dissertation. Research on granular formations in the slag
in steelmaking by means of test models.
United Nations. Economic Commission for Europe.
Economic aspects of continuous casting of steel.
210p. 1968. The U. N., New York. $2.50.
Verein Deutscher Eisenhuttenleute. Anhaltszalilen fur
die Warmewirtschaft in Eisenhuttenwerken. Ed. 6.
xiii, 601p. 1968. Verlag Stahleisen, Dusseldorf.
132 DM.
Calculations and numerical values for heat economy in
iron and steelworks.
Ausschuss fur metallurgische Grundlagen.
Giessen und Erstarren von Stahl. 141n. 1967. Verlag
Stahleisen, Dusseldorf. 27 DM.
Casting and solidification of steel.
Wartmann, R., and others. Temperature distribution
in the hearth of a blast furnace with an air-cooled
hearth bottom. 21p. 1967. Brutcher. Altadena, Calif.
(HB-7252). $14.50.
Translated from the German.
Weinreich, W. Beitrag zur Kenntnis der Kuhlungsund
Erstarrungsvorgange beim Stranggiessen von
Stahl. 70p. 1967. Technische Universitat, Berlin.
Dissertation. Contributions on cooling and solidification
in continuous casting of steel.
White, John Henry. Extraction of metals, vii, 91p.
1968. Macmillan. London. 16/-.
Wick, K. Untersuchungen uber die Art und Verteilung
oxydischer Einschlusse bei unterschredlich tedberuhigten
Stahlen. 52p. 1967. Technische Universitat.
Berlin.
Dissertation. Investigation of the type and distribution of
oxide inclusions in various partly killed steels.
Wohlbier, Friedrich. 7.ur Kinetik der Ahiminiumdes-

oxydation von Stahl. 63p. 1967. Technische Hochschule,
Clausthal.
Dissertation. On the kinetics of aluminum deoxydation of
steel.
Woite. II. Einfluss der Auslegung von Siemens-Martin-
und Sauerstoffaufblas-Stahlwerken auf die
Invest it ions-und Selbstkosten bei unterschiedlichen
Rohstahlkapaziatten. 163p. 1967. Technische Universitat,
Berlin.
Dissertation. The effect of the layout of open hearth
and oxygen converter steelworks on the investment and
prime cost for various crude steel capacities.
Government Publications
U. K. Inspector of Explosives. Report on a fatal accident
in a blast furnace at Scunthorpe, Lincolnshire,
on 17th July 1965. 28p. 196S. HMSO. 3/9.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Effect of new methods of remelting and of
argon purging on the properties of EP-65 stainless
steel, by P. I. Melikhov and A. V. Stepanov. 12p.
Aug. 1967. CFSTL AD-673 753.
Translated from the Russian.
-. Peculiarities of refining and hardening of metal
during electroslag remelting, by V. V. Panin and
others. 20p. Sept. 1967. CFSTI: AD-66S 059.
Translated from the Russian.
U. S. Bureau of Mines. Albany (Oreg.). Study of heat
transfer to water-cooled cojnter crucibles during
vacuum arc melting, by P. G. Clites and R. A. Beall.
36p. (1967). CFSTL BM-RI-7035.*0 Dep.
U. S. Bureau of Mines, Minneapolis (Minn.). Kinetics
of formation of carbon dioxide and carbon from
45

carbon monoxide in presence of iron pellets, by
Larry A. Haas and others. 35p. Jan. 1968. BM-RI-
7064.* •
U. S. Bureau of Mines, Pittsburgh (Pa.). Cause of
fuming in oxygen steelmaking, by J. P. Morris and
others. 27p. (Nov. 1967). BM-RI-7047."
. Developing thermocltemical model for iron
blast furnace, measurement of rate coefficient for
reduction of iron ore pellets in packet bed, by Hillary
W. St. Clair. 23p. Oct. 1967. BM-RI-703L**
REFRACTORIES
British Iron and Steel Research Association. Steelmaking
furnace refractories; proceedings of the 68th
steelmaking conference, Scarborough, April 1967.
136p. (1968?). The Association, London. 30s.
Norton, F. H. Refractories, Ed. 4. x, 450p. 1968.
McGraw-Hill, New York. $18.50.
Has chapter on refractories in the iron and steel industry.
Ziemck, Gerhard. Zur Haltbarkeit von Konvertergefassen
unter besonderer Berucksichtigung des Futterdruckes.
lOSp. 1966. Technische Hochschule,
Aachen.
Dissertation. On the durability of converter receptacles
with particular regard to lining pressure.
FOUNDRY
American Foundrymen's Society. AFS metalcasting
dictionary. 203p. (1968?). The Society, Des Plaines,
HI. $18.50. (Members. $9.25).
. Basic principles of risering. 96p. 1968. Addison-Wesley,
Reading, Mass. (Cast metals technology.
v.2). $6.
46

British Cast Iron Research Association. Conference on
electric melting and holding furnaces in the ironfounding
industry, 1967. 463p. (1968). The Association,
Birmingham, England. £6.
British Steel Castings Research Association. Data
sheets on molding materials. Ed. 3. xviii, 90p. 1967.
The Association, Sheffield, England. 20s.
Copper Development Association. Copper in iron
castings. 12p. 1967. The Association, London. (Publication
no. 72). 2/-.
Coppolani, J., and J. C. Margerie. Thermal analysi
cast iron as a quality control tool. 34p. 1968. Iron
and Steel Institute. London. (BISI-5673). £I0.10s.
($25.20).
Translated from the French.
Council of Ironfoundry Associations. Costing and estimating
for the ironfoundry. 72p. 1967. The Council,
London. 63s.
Cratchley, D. Exploiting the advantages of todays
cast irons. (196S?). Council of Ironfoundry Associations.
London.
Gulyaev. B. B., ed. Gases in cast metals. 257p. 196
Consultants Bureau, New York. $27.50.
Kondic, Voya. Metallurgical principles of founding
x, 286p.' 196S. Edward Arnold. London. 50/-.
American Elsevier, New York. $9.
Lamp, J. D. S. Casting pit practice. Iliffe, Londo
(Modem steelmaking practice series). 28s.6d.
Logothetis, D. Metallurgy and melting technique of
water-cooled hot-blast cupola. Part I. 19p. 1966.
47

Brutcher, Altadena, Calif. (HB-6639-I). $14.50.
Translated from the German.
Merchant. Harish D., ed. Recent research on cast
iron. S31p. (1968?). Gordon and Breach, New York,
$51.
Patterson, Wilhelm, and Reinhard Dopp. Untersuchungen
zur Erstarrung von Temperguss. 117p. 1968.
Westdeutscher Verlag, Cologne. (Forschungsberichte
des Landes Nordrhein-Westfalen, no. 1858).
83.30 DM.
Research on hardening of malleable cast iron.
Reifferscheid, K. Methods for innoculation of liquid
cast irons. 13p. 1967. Brutcher, Altadena. Calif.
(HB-7352). $8.50.
Translated from the German.
Sarkar. Ananda Dulal. Mould and core material for
the steel foundry. 161p. 1967. Pergamon, Long Island
City. N. Y. $5.50. (pap. $4).
Sharp, John David. Casting pit practice. 141p. 196S.
Iliffe. London. 42/-.
Veinik, Albert I. Thermodynamics for the foundryman,
xx, 353p. 1968. Maclaren, London. £6/10/-.
Originally published as Raschet otlivki. Mashinostroenie,
Moscow. 1964.
Verein Deutscher Eisenhuttenleute. Chemikcrausschuss
and Vereins Deutscher Giessereifachleute,
Fachausschuss Werkstoffprufung. Cliemische Untersuchungsverfahren
fur Eisengicsserei-Laboratorien.
104p. 1967. Verlag Stahleisen, Dusseldorf. 19 DM.
Chemical test methods for iron foundry laboratories.
4X

Verein Deutscher Giessereifaclileute. Giesserei-Kalender
1968. 28Sp. 1967. Giesserei-Verlag, Diisseldorf.
7.50 DM.
Foundry yearbook.
Wallace, John F., and others. Mecltanism of graphite
formation. Sip. (1968?). Malleable Founders Society,
Cleveland. Ohio. $3.50.
Wieser. P. F., and others. Mechanism of graphite f
mation in iron-silicon-carbon alloys. Sip. 1967.
Malleable Founders Society, Cleveland. Ohio. $3.50.
Wlodawer, Robert. Die gelenkte Erstarrung von
Stahlguss. Ed. 2, rev. and enlarged. 285p. 1967.
Giesserei-Verlag. Diisseldorf. 138.60 DM.
The directional solidification of steel castings.
World Conference on Investment Casting (1st), London,
1966. Proceedings. (135)p. (1967). British
Investment Casters* Technical Association, Sheffield.
England.
Government Publications
Battelle Memorial Institute, Columbus (Ohio). Shaping
of precipitation-hardening stainless steels by
casting and powder-metallurgy, by J. G. Kura and
others. 50p. Apr. 1966. CFSTI: NASA-SP-5086. Dep.
U. S. Agency for International Development. Communication
Resources Division, Washington (D.
C). Plant requirements to set up and operate a gray
iron jobbing foundry. Rev. ed. 40p. Apr. 1959.
CFSTL PB-177 920.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Bimetallic castings, by A. V. Lakedemon-
41

skiy. 149p. Apr. 1967. CFSTI: N68-13738; AD-661
440.
Translated into English from Bimetallichfakiye, TJkrania.
1964.
MECHANICAL WORKING
American Iron and Steel Institute. Cold finished steel
bar handbook. 152p. (1968?). The Institute, New
York.
Avitzur, Betzalel. Metal forming: processes and an
alysis. 500p. 1968. McGraw-Hill, New York. $17.50.
Braun, H., and W. Schultze. Molybdenum dies for th
extrusion of steel sections. 31p. 1967. Iron and Steel
Institute, London. (BISI-5861). £ 10.10s.
Translated from the German.
British Iron and Steel Research Association. Conference
on rolling (4th), Scarborough, 1967. 88p. 1968.
Inter-Group Laboratories. British Steel Corp.,
London. 42s. ($5.04).
Ditges, G. Beitrag zur Bestimmung von Einformgeometrie
und Umformenergie bei der Rohr-ProfQierung.
145p. 1966. Technische Hochschule, Aachen.
Dissertation. Contribution to the definition of shaping
geometry and deformation energy in tube shaping.
Ditges, Gtinter. Roll-forming of tubes and experimental
investigation of the stresses in the strip. 26p.
1967. Iron and Steel Institute. London. (BISI-
5923). £9.
Translated from the German.
Ebertshiiuser, Hans. Technologie der Blechverarbeitung.
Grundlagen der Verfahren und Bibliographie
der Veroffentlichungen aus den Jahren 1954-1964.
lOOp. 1967. Triltsch, Dusseldorf. 19.80 DM.
50

Technology of sheet manufacture. Fundamentals of the
processes end bibliography of publications for the period
1954-1964.
Fazan, B., and P. Blain. Tube rolling on stretch reducing
mills. 35p. 1968. Iron and Steel Institute,
London. (BISI-5702). £9.
Translated from the French.
Gebtzach, G. Fachbibliographie der Umformtechnik,
v2: Walzen von Blechen und Bandern 1955-1962.
xxiv, 855p. 1965. Michael Triltsch Verlag, Diisseldorf.
Rolling of sheet and strip bibliography 1955-1962.
Gentzch, G. Umformtechnik. Dissertationsreferate
1945-1967. 160p. 1968. VDI-Verlag, Dusseldorf.
Deformation technology. Abstracts of dissertations 1945-
1967.
Gorecki, W., and J. Madejski. Selection of emulsified
lubricants for the cold rolling of steel strip. Part 11:
Experimental. 18p. 1967. Brutcher, Altadena, Calif.
(HB-6866-II). $12.50.
Translated from the Polish.
Grosch, J. Der Einfluss des Werkstoffs auf das Verhalten
Unberuhigter Bleche beim Tiefziehen im Anschlag
in der Fertigung. 132p. 1967. Technische
Universitat, Berlin.
Dissertation. The influence of the materials on the behaviour
of rimming steel sheet in deep drawing in impact
shaping.
Grotz, Hermann. Warmfliesspressen von Stahl. 89p.
1966. Technische Hochschule, Hannover.
Dissertation. Hot extrusion molding of steel.
Grunhofer, H. G., and others. Surface defects on cold
rolled strip and sheet. 48p. 1967. Verlag Stahleisen,
Dusseldorf.
In German, French and English.
51

Haus der Technik. Eigenschaften und Anwendung von
Festschmierstoffen. Vortragsreihe vom 31 Januar
1967. 57p. 1967. Vulkan-Verlag, Essen. (Vortragsveroffentlichungen.
Haus der Technik. v.127). 16
DM.
Properties and applications of solid lubricants. Lectures
given Jan. 31, 1967.
Iron and Steel Institute. Deformation under hot-working
conditions; proceedings of a conference lield at
the Department of Metallurgy, University of Sheffield
on 5 and 6 July 1966. viii, 189p. 196S. The
Institute. London. (Publication no. 108). £7.
. Machinability, proceedings of a conference
organized by the Iron and Steel Institute and the
Institute of Metals.. .held in London, October 4-6,
1965. 251p. 1967. The Institute, London. (Special
report no. 94). £6.
. Reheating for hot working. 196p. 1968. The
Institute, London. (Publication no. 111). £8.
Proceedings of a conference held in London, December
19-20. 1967.
Kalpakjian, Serope. Mechanical processing of materials,
xvi, 347p. 1967. Van Nostrand, Princeton, N. J.
ca. $10.
Laws, W. R., and F. M. Salter. Future trends in the design
of continuous pusher furnaces for the hot strip
mill. 1967. British Iron and Steel Research Association,
London. (PE/A/29/67).
Monday, Cyril. Milling. 180p. 1967. Machinery Publishing
Co.. Ltd., Brighton (England). 25/-.
Muller, H. G. Achievements and prospects in rolling
mill automation. 15p. 1968. Iron and Steel Institute,
52

London. (BISI-6473). £8.
Translated from the German.
Organization for Economic Cooperation and Development.
Seminar on metal cutting; proceedings of tlte
seminar held in Paris, September 1-2, 1966. 385p.
1967. OECD, Paris. 30fr.
Parkins, Redvers Nicholson. Mechanical treatment of
metals. 352p. 1968. Allen & Unwin, London. 55s.
Pawelski, O., and E. Neuschutz. Beitrag zu den Grundlagen
des Walzens in Streckkalibern. 91p. 1967.
Westdeutscher Verlag, Cologne. (Forschungsberichte
des Landes Nordrhein-Westfalen Nr. 1775).
65.20 DM.
Contribution to the fundamentals of rolling in breakingdown
passes.
Pierce, Cyril Marvin. Forces involved in the axisymmetric
extrusion of metals through conical dies.
144p. 1966. UM: Order no. 67-6357. $6.80 (fs). $3
(mf).
Dissertation. Ohio State University, Columbus, Ohio.
Rozov, Nikolai Vasilevich. Cold drawing of steel tubes.
216p. 1968. National Lending Library for Science
and Technology, Boston Spa, England. 17/6.
Translated from the Russian.
Sabroff, A. M., and others. Forging materials and
practices. 432p. 196S. Reinhold. New York. $16.50.
Schroeder, Hermann. Uber die elastische Verformung
von Kaltwalzen und ihren Einfluss auf den Walzvorgang.
53p. 1967. Technische Hochschule, Clausthal.
Dissertation. On the elastic deformation resulting from
cold rolling and its influence on rolling operations.
53

Semlinger, Erwin. Stanztechnik. viii, 247p. 1967. Viewig,
Braunschweig. 16.80 DM.
Stamping technology.
Sheftel', N. L Kliolodnaya prokatka listovoi stali. 324p.
1966. Metallurgiya, Moscow. 1 R. 17 K.
Cold rolling of sheet.
Standlcy, D. J., and others. High temperature telemetry
equipment for relteating furnace studies.
1967. British Iron and Steel Research Association,
London. (PE/A/45/67).
Tarmann, IL, and others. On the technology of forging
steels difficult to work. 24p. 1967. Brutcher, Altadena,
Calif. (HB-7247). $16.50.
Translated from the German.
Townsend, N. A. Physical metlwds of identification
marking. lOp. 1967. British Iron and Steel Research
Association. London. (PE/C/39/67).
Tselikov. A. Stress and strain in metal rolling. 475p.
1967. MIR Publishers, Moscow. £l.ls.
Translated from the Russian.
Weimer. G. State of development of cold roll forming.
3 pts. 1967. Iron and Steel Institute, London. (Pt. I,
BISI-5863. Pt. II and HI. BISI-6048). Pt. 1. £11. Pt.
II and III, £15.
Translated from the German.
Weimar, Gerhard. Langsdehnungen und Verwerfungen
beim Bandprofilwalzen, (Walzprofilieren). 62p.
1966. Technische Hochschule, Hannover.
Dissertation. Linear expansion and dislocations in connection
with section rolling. (Profile milling).
Government Publications
Battelle Memorial Institute. Columbus, Ohio. Development
of practice for composite rolling of struc-
M

tural metal panels. Quarterly report no. 15, Nov. 15,
1966-Aug. 15, 1967. 16p. Aug. 1967. CFSTI: N68-
10573.
-. Development of practice for composite rolling
of structural metal panels. Quarterly progress report,
15 Aug.-15 Nov. 1967, by J. R. van Orsdel and
others. 19p. Feb. 1968. CFSTL AD-666 751.
Missouri University. Department of Mechanical Engineering,
Columbia (Mo.). Strengthening of steel
by marstraining with high-energy-rate forming
equipment, by Donald L. Gibson and Charles A.
Stevens. 130p. May 1967. CFSTL BDX-613-103.
Dep.
U. K. National Engineering Laboratory. Materials
Group, Glasgow (Scotland). Feasibility study on
cold extruding cast iron, by E. Whitfield. 23p. Jan.
1967. CFSTI: N6S-31628.
U. K. National Lending Library for Science and Tec
nology, Boston Spa (England). Fatigue studies on
the high-strength steel 35 NCD 16 (AFNOR), by G.
Ledoux. 18p. July 1968. NLL: Transl. 68/144.
Translated from the German.
. Hot-torsion test, a suitable technique for assessment
of hot-workability, by J. Langerweger and
H. Trenkler. 20p. July 1968. NLL: Transl. 68/143.
Translated from the German.
U. S. Air Force Materials Laboratory, Wright-Patterson
Air Force Base (Ohio). Effect of specimen size
and interface lubrication on the compressive fUnv
stress of copper and steel, by Charles S. Cook and
Joseph W. Spretnak. 46p. Nov. 1967. CFSTI: AD-
663 426.
Dissertation.
55

U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Forging and stamping, by G. F. Degtev
and others. 29p. Aug. 1967. CFSTI: AD-666 063.
Translated from the Russian.
New technological processes in the pressure
treatment of metals. 189p. June 1967. CFSTI: AD-
673 197.
Translated from the Russian.
-. Problems of friction theory, wear and lubrication
action, by N. D. Donchcnko. 6p. Mar. 1967.
TT-67-63212; AD-660 344."
Translated from the Russian.
-. Rolling of metals and bimetals in vacuum, by
A. V. Krupin and N. V. Yudina. 38p. Sept. 1967.
CFSTI; AD-670 074.
Translated from the Russian.
U. S. Joint Publications Research Service. Washington
(D. C.) Thermomechanical treatment of rail
and high-manganese steel, (\SSR. 9p. May 1968.
CFSTL JPRS-45437.
Translated from the Russian.
U. S. National Aeronautics and Space Administration.
Lewis Research Center. Cleveland (Ohio). Study of
residual stress induced during rolling, by E. V.
Zaretsky and others. 21p. 1968. CFSTI: N6S-30955.
U. S. National Aeronautics and Space Administratio
Marshall Space Flight Center, Huntsville (Ala.).
Deformation processing of precipitation-hardening
.stainless steels, by D. E. Strohecker and others. 278p.
(1968). CFSTL N6S-21917.
Machining and grinding of ttltrahigh-strength
56

steels and stainless steel alloys, by C. T. Olofson
and others. 217p. 1968. CFSTI: N68-21241.
POWDER PROCESSING
Borok, B. A., ed. Researclies in powder metallurgy.
viii, 148p. 1966. Consultants Bureau, New York.
Hausner, Henry Herman, and others, eds. Iron powde
metallurgy. 379p. 1968. Plenum, New York. (Perspectives
in powder metallurgy, v. 3). $17.50.
Mauer, K., and II. Grewe. Contribution to the theo
of sintering behaviour of compacts of pure iron
powders and iron-manganese powder mixtures. 17p.
196S. Iron and Steel Institute, London. (BISI-6513).
£5.
Translated from the German.
New and Exotic P/M Materials Clinic Conference.
Proceedings. Sponsored by In-PIant Powder Metallurgy
Association, Spring 1967. 57p. 1968. Metal
Powder Industries Federation, New York. $10.
(Members $5).
Government Publications
Los Alamos Scientific Laboratory, Los Alamos (N.
Mex.) Friction index and pressing characteristics of
spherical stainless steel powder and oxidized copper
powder, by H. Sheinberg. 9p. June 1967. CFSTI:
N68-14022.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Investigation in region of frictional materials,
by I. M. Fedorchenko and others. lOp. Oct.
1967. CFSTI: AD-672 695.
Friction testing of iron phosphorus powder-metallurgy alloys,
Translated from the Russian.
57

. Rolling of metal powders, by G. A. Vinogradov
and Yu. N. Semenov. 94p. June 1967.
CFSTL AD-668 029.
Edited machine translation of the monograph, Prokatka
gallicheskihk poroshkov. Moscow. I960.
HEAT TREATING
American Society for Testing and Materials. Temper
embrittlement in steel. 255p. (1968). The Society,
Philadelphia. Pa. (Special technical publication no.
407). $21.
Bobliert, D. On the usefulness of TTT diagrams for
the heat treatment of (steel) forgings. 17p. 1967.
Brutcher, Altadena, Calif. (HB-7042). $11.50.
Translated from the German.
Dulicu. D., and J. J. Irani. Low temperature rolling of
upper bainitic structures. 20p. 1968. British Iron and
Steel Research Association, London. (MG/A/30/
68).
Geisel, Herbert. Grundlagen der unmittelbaren Widerstandserwarmung
langgestreckter Werkstucke.
116p. 1967. Vulkan-Verlag, Essen. 40 DM.
Fundamentals of direct resistance heating of elongated
worked parts.
Herbsleb, G., and W. Schwenk. Study of the susceptibility
to grain disintegration of a non-stabilized
17% chromium steel and the elimination of this susceptibility
by stabilizing annealing. 31p. 1968. Iron
and Steel Institute, London. (BIS1-6471). £8.
Translated from the German.
Hrinevich, John, Jr. Study of tlte relationship between
the yield point, delay time and the brittle to ductile
transition in a low carbon alloy. 148p. 1967. UM:
Order no. 67-10534. $7 (fs). $3 (mf).
Dissertation. Michigan State University, East Lansing,
Mich.

Irani, J. J., and others. Effect of thermal and thermomechanical
treatments on tlte temper embrittlement
of low alloy steels. 1967. British Iron and Steel Research
Association, London. (MG/A/81/67).
Koebel, Norbert K. Surface activation in the heat
treatment of metals. 12p. 1967. American Society
for Metals, Metals Park, Ohio. (Technical report
no. C7-24.2).
Langer, E. W. An investigation of the quench ageing
process in iron. 213p. 1967. Technical University,
Copenhagen.
Dissertation.
Martin, John Wilson. Precipitation liardening. xii,
231p. 1968. Pergamon, New York. $6.50.
Mehrkam, Quentin D. New developments in salt bath
heat treating, lip. 1967. American Society for Metals,
Metals Park, Ohio. (Technical report no. C7-
7.4).
Napf, G., and others. Studies relating to the heat-treatment
of alloyed sintered steels containing copper
and nickel as alloying additions. 23p. Oct. 1968. Iron
and Steel Institute, London. (BISI-5985). £8.
Translated from the German.
Rekristattisation metallischer Werkstoffe; Vortrage,
gehalten auf der 4. Gemeinschaftskonferenz "MetalV
am 1. und 2. April 1965 in Berlin Aldershaf.
208p. 1966. VEB Deutscher Verlag fiir Grundstoffindustrie,
Leipzig.
Recrystallization of metallic materials: Lectures held at
the 4th joint conference "Metall," April 1-2, 1965, Berlin.
Government Publications
Case Institute of Technology, Cleveland (Ohio).
Effect of ultrasonic vibration on precipitation hard-
50

cning of steels and superalloys, by Stanley G.
Young. 126p. June 1968. CFSTI: N68-16667.
Dissertation.
New Zealand. Scientific and Industrial Research Department.
Heat treatment of steels, by S. Nicholson.
40p. 1967. The Department, Wellington. (Information
series report no. 61).
Stanford University. Department of Materials Science,
Stanford (Calif.). Effect of microstructure on the
cleavage strength of quenched and tempered steels,
by A. S. Tetelman. 20p. 1968. CFSTI: N68-36288.
Technische Hochschule, Munich. Eigenspannungs-
Untersuchungen mittels elektrischer Dehnungsmessstreifen
an einsatzgeharteten Rotten des Stahh 18 Ni
Cr Mo 14, by Eckhard Tiemann. 126p. Mar. 1968.
CFSTL N68-36389.
Dissertation. Residual stress testing by means of electrical
strain gauge strips on case hardened rolls of steel 18 Ni Cr
Mo 14.
United Kingdom. National Lending Library for
Science and Technology, Boston Spa (England).
Increasing the reliability of austenitic steel superheaters,
by V. N. Gulyavev and others. lOp. May
1968. NLL: CE-TRANS-'4745.
Translated from the Russian.
U. S. National Aeronautics and Space Administration.
Washington (D. C.). Thermal and mecltanical
treatment for precipitation - hardening stainless
steels, by C. J. Slunder and others. 207p. 1968.
CFSTL NASA-SP-50S9.
JOINING
Althouse, Andrew D., and others. Modern welding;
complete coverage of the welding field in one easy-
60

to-use volume. 712p. cl967. Good heart-Wilcox,
Homewood, 111. $8.50.
American Welding Society. Welding liandbook. V.l.
Ed. 6. 600p. 1968. The Society, New York. $12.
Blodgett, Omer W. Design of welded structures, v.p.
1966. James F. Lincoln Arc Welding Foundation,
Cleveland, Ohio. $7.
Castro, R.. and J. J. de Cadcnet. Metallurgie du soudage
des aciers inoxydables et resistant a chaud.
196p. 1968. Dunod, Paris. 36 Fr. fr.
Metallurgy of the welding of stainless and heat resisting
steels.
Dessel, Ernst-Otto. Beitrag zum Schweissen von Nickellegierungen
und austenitischen Chrom - Nickel-
Stahlen mit Elektronenstrahlen unter besonderer
Berucksichtigung des Einbrandverhaltens. 136p.
1967. Technische Hochschule, Aachen.
Dissertation. Contribution on the welding of nickel alloys
and austenitic chrome-nickel-steel alloys by electron beams
with particular regard to penetration behavior.
Engquist, R. D. Parameters affecting electron beam
welding. 23p. 1967. American Society for Metals,
Metals Park, Ohio. (Technical report no. C7-19.2).
Evans, R. M. Metals joining. 4p. 1967. Battelle Memorial
Institute, Columbus, Ohio. (DMIC review).
Giachino, Joseph William, and others. Welding skills
and practices. Ed. 3, rev. 342p. (cl967). American
Technical Society, Chicago, ca. $7.
. Welding technology, v, 474p. cl968. American
Technical Society, Chicago. $7.50.
Gorissen, E. Schweisstemperatur und Schweisseigenspannungen
bei Grossrohren. 212p. 1965. Tech-
61

nische Hochschule, Aachen.
Dissertation. Welding temperature and residual stresses
in large tubes.
Gunia, R. B., and G. A. Ratz. Measurement of delta
ferrite in austenitic stainless steels. 22p. 1968. Welding
Research Council, New York. (Bulletin no. 132).
$1.
Gumey, Timothy Russell. Fatigue of welded structures,
xii, 294p. 1968. Cambridge University Press,
London. (British Welding Research Association
Series). 70/-. ($11.50).
Houldcroft. P. T. Welding processes. 194p. 1967.
Cambridge University Press, London. $7.50.
Hummitzsh, W., and G. Juretzko. Welding of spheroidal
graphite cast iron. 21p. 1967. Brutcher. Oltadena
Calif. (HB no. 7285). $14.50.
Translated from the German.
International Institute of Welding. Fatigue fractures
in welded constructions; case studies collected by
tlte Intertwtional Institute of Welding dealing
with constructions in which welding or allied processes
were used. 287p. 1967. Institute of Welding,
I-ondon. £5.5s.
Jefferson, T. B. Welding encyclopedia. Ed. 16. 1070p.
1968. Monticello Books, Morton Grove, 111. $10.
. Welding encyclopedia study guide and workbook.
224p. 1968. Monticello Books, Morton Grove,
III. $3.50.
Leake, Kenneth, and Norman J. Henthorne. Welding
science and metallurgy, viii. 168p. 1968. Cassell,
London. 30/-.
62

Linse, V. D., and others. Explosive bonding. 30p. 1967.
Battelle Memorial Institute, Columbus, Ohio.
(DMIC memo no. 225).
MacKenzie, L. B. Welding encyclopedia. Ed. 16, com
pletely revised and re-edited by Ted B. Jefferson.
1065p. c!96S. Monticello Books, Morton Grove.
III.
Matting, Alexander, and others. Metallkleben. 76p.
1966. Westdeutscher Verlag, Cologne. 55.70 DM.
Metal bonding.
Milner, D. R., and R. L. Apps. Introduction to welding
and brazing. 222p. 1968. Pergamon, Long Island
City, N. Y. 35s.
Pfluger, Allan R., and Richard E. Lewis. Weld imperfections.
652p. (1968). Addison Wesley, Reading,
Mass. $16.50.
Proceedings of a symposium held at Lockheed Palo Alto
Research Laboratory, Palo Alto. Calif., September 19-21,
1966.
Richards, K. G. Weldability of steel. 26p. British
Welding Research Association, Cambridge. 12s.6d.
Schmidt, W. Welded steel pipes subjected to high
stresses. ISp. 1967. Iron and Steel Institute. London.
(BISI-5551). £7. ($16.80).
Translated from the German.
Special Symposium on Electron Beam Welding, Nov.
7-8, 1966, Ohio State University. Proceedings, ed.
by Edward R. Funk. 269p. 1967. The University,
Department of Welding Engineering, Columbus,
Ohio.
Tylecote, R. F. Solid phase welding of metals. 300p.
1968. St. Martin's, New York. $18.
63

Vallini, A. Joints sondes, controle, metallurgie. 224p.
196S. Dunod, Paris. 38 Fr. Fr.
Welded joints, examination, metallurgy.
Welding Institute. Control of distortion in welded
fabrications. Ed. 2. x, 70p. 1968. The Institute, London.
16/6.
-. Physics of the welding arc; a symposium organized
by the Institute of Welding, London, Oct.
29-Nov. 2, 1962. 240p. cl966. The Institute, London.
-. Significance of defects in welds: proceedings
of the first conference, (London, 23-24 February
1967). 96p. 1968. Institute of Welding, London.
Wirtz, Heribert. Das Verltalten der Stahle beim
Schweissen. Teil 2. Anwendung. 205p. 1968. Deutscher
Verlag fiir Schweisstechnik. Dusseldorf.
(Fachbuchreihe Schweisstechnik, v.44). 29.50 DM.
The behavior of steel alloys during welding, v.2. Application.
Government Publications
Advisory Group for Aeronautical Research and Development,
Paris (France). Resistance a la fatigue
dun collage metal-metal a simple recouvrement, bv
L. Locati. 30p. Apr. 1958. CFSTL AD-661 938.
Resistance to fatigue of a metal-to-metal glued joint with
a single amount of overlap.
Air Reduction Company. Research and Engineering
Department, Murray Hill (N. J.). HY-130/150
weldments: development of filler metals and joining
procedures. Summary report, June 1963-Dec. 1965.
74p. Jan. 1966. CFSTL AD-4S3 629.
Battelle Memorial Institute, Columbus (Ohio). Ad-
64

hesive bonding of stainless steels: including precipitation-hardening
stainless steels, by R. E. Keith and
others. 125p. Feb. 1967. CFSTI: NASA-SP-5085.
Dep.
-. Feasibility study of resistance welding of aluminum
alloys, stainless steel, and titanium in a
hard vacuum. Final report, 27 June, 1967-29 Feb.
1968, by D. L. Cheever and others. 3Sp. Feb. 1968.
CFSTL N6S-26510.
Bettis Atomic Power Laboratory. West Mifflin (Pa.).
Some problems and new welding techniques applied
to the construction of nuclear reactors, by Henri
Foulquier. 27p. 1967. CFSTL WAPD-Trans-76.
Dep. JCL. $2.60 (fs).
Boeing Company. Aerospace Group, Seattle (Wash.).
Study of dissimilar metal joining by solid state
welding. Final report, by C. N. Crane and others.
Sip. Nov. 1967. CFSTL N68-I3219.
College of Aeronautics, Cranfield (England). Influence
of nitrogen on the properties of mild steel
weld metal deposited from covered electrodes, by J.
Wegrzyn and R. L. Apps. 30p. 1967. CFSTL N68-
30510; COA-MAT-4.
. Weld heat affected zone structure and properties
of two lotc carbon Mn-Cr-Mo-V steels, by E.
Smith and others. 49p. Feb. 1968. CFSTL N68-
30576; COA-MAT-3.
. Welti heat affected zone structure and properties
of two mild steels, by E. Smith and others.
44p. Jan. 1968. CFSTI: N6S-32569.
-. Department of Materials, Cranfield (England.
Measurement of thermal cycles in the weld
65

heat affected zone of mild steel, by M. D. Coward
and R. L. Apps. 15p. Sept. 1967. CO A-Note-Mat.-
13-#
Department of Materials, Cranfield (England).
Welding embrittlement of the parent plate
outside the visible heat affected zone region, by
M. D. Coward. Sp. Apr. 1968. CFSTI: COA-NOTE-
MAT-19; N68-30473.
Deutsche Forschungsanstalt fiir Luft-Raumfahrt. In
stitut fiir Flugzeugbau, Brunswick (West Germany).
Zeitstandfestigkeiten und Kriechverformungen
von uberlappten Metallklebungen im Temperaturbereich
von plus 20°C bis plus 175eC, by W.
Althof. 51p. Nov. 1967. CFSTI: N68-17490.
Creep rupture strengths and creep deflection of overlapped
metal bonded joint; in the temperature region from plus
20°C. to plus 175°C.
Institut du Soudure, Paris (France). Study of weld
joints on very thick steel plates. Special report no.
2, by Granjon and others. 48p. Sept. 1967. CFSTI:
EURAEC-1927. Dep.
Lehigh University. Fritz Engineering Laboratory,
Bethlehem (Pa.). A514 steel joints fastened by A490
bolts, by Geoffrey L. Kulak and John W. Fisher.
55p. June 1967. CFSTL PB-176 396.
Lockheed-Georgia Co.. Marietta (Ga.). Nondestructive
testing for evaluation of strength of bonded
materials (metallic), by Sherman E. Cohen, lip.
Sept. 1966. CFSTI: N6S-22767.
Bibliography.
•—. Nondestructive testing for evaluation of
strength of bonded materials (metallic), by Sherman

E. Cohen. 8p. Feb. 1968. CFSTI: N68-22766.
Selected abstracts from a bibliographic list.
Sun Shipbuilding and Dry Dock Company. Aero/Hydro
Space Division, Chester (Pa.). Study of welding
procedures for fabricating large structures of 18
per cent nickel 200 grade (var) maraging steel. Final
report, by Harold Disman. 139p. Oct. 1967.
CFSTI: N68-10815.
Union Carbide Corporation. Y-12 Plant, Oak Ridge
(Tenn.). Resistance spot welding stainless steel foil
by the expendable-wire technique, by C. L. Estes.
17p. Apr. 1968. CFSTI: Y-1613. Dep.
U. K, Atomic Energy Authority. Reactor Group, Culcheth
(England). Preliminary investigation into
welding by friction. 13p. Dec. 1965; reprinted 1968.
CFSTL TRG-Report-1157. Dep.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Hot rolling of bimetallic sheet with a thick
copper coating, by V. N. Klimov. 23p. Sept. 1967.
N68-12784."
Production of steel-copper bimetal by means of hot rolling.
Tronslated from the Russian.
. Influence of plastic deformation in the welding
process on the strength of welded joint connections,
by I. P. Zamyatin. 17p. Aug. 1967. CFSTI:
AD-673 412.
Edited machine translation from the Russian.
U. S. National Aeronautics and Space Administratio
Washington (D. C). Metlwd of brazing aluminum
to stainless steel for high-stress-fatigue applications,
by D. C. Martin. 16p. 1968. CFSTL N68-22778.
67

. Lewis Research Center, Cleveland (Ohio).
Evaluation of tantalum-to-stainless-steel transition
joints, by Adolph C. Spagnuolo. 29p. 1968. CFSTI:
N68-21898.
. Marshall Space Flight Center, Huntsville
(Ala.). Welding of precipitation-Iiardening stainless
steels, by J. J. Vagi and others. 194p. 1968. CFSTL
N68-21429.
U. S. Naval Research Laboratory, Washington (D.
C). Fracture properties of quenched and tempered
steel weldment specimens, by L. J. McGeadv. 18p.
Oct. 1967. CFSTI: AD-663 558.
CLEANING, COATING, FINISHING
Becker-Bar brock, V. Untersuchung des Elektrochemischen
Schleifens von Hartmetall und Schnellarbeitsstahl.
143p. 1966. Technische Hochschule, Aachen.
Dissertation. Investigation of the electrochemical polishing
of cemented carbide alloys and high-speed tool steel.
Burns, Robert Martin, and W. W. Bradley. Protective
coatings for metals. Ed. 3. xii, 735p. cl967. Reinhold.
New York. (American Chemical Society Monograph
no. 163). $25.
Deichelmann, Herman. Die elastischen Spannungen
in Stahlgrobblechemaillierungen. 206p. 1967. Technische
Hochschule, Clausthal.
Dissertation. The elastic stress in steel sheet enamel.
Dictzcl. A. Einfluss des Wasscrdampfgeltaltes der Ofcnatmospliare
auf den Stahlblech-Emaillierprozess.
22p. 1966. Wcstdeutscher Verlag, Cologne. 14.80
DM.
Effect of humidity of the furnace atmosphere on the steel
plate enamelling process.
68

Fancutt, Frank, and J. C. Hudson. Protective painting
of structural steel. Ed. 2, rev. iii-xxii, 137p. 1968.
Chapman & Hall, London. 35/-.
Finishing handbook and directory, 1968; ed. by J. E.
Bean assisted by the staff of the journal "Product
Finishing." 656p. 1968. Sawell Publications. London.
48/-.
Hausnei, Henry Herman, ed. Coatings of high-temperature
materials, ix, 296p. 1966. Plenum, New
York. $15.
Hoare, William Edward, and B. T. K. Barry. Properties
and application of tin-coated steel slwet and
strip. 15p. 11967J. Tin Research Institute, Greenford,
England. (Publication no. 377).
International conference on protection against cor
rosion by metal finishing, Basle, 1966; proceedings
of a conference organized by the Schweizerisclte
Galvanotechnische Gesellschaft and the Schweizerischen
Vereinigung der Lack- und Farbenchemiker
as the 31st meeting of tlie European Federation of
Corrosion. 345p. 1967. Forster-Verlag, Zurich.
Kammori, O., and others. X-ray fluorescence method
for determination of the thickness of coating materials
on steel. 9p. 1967. Brutcher, Altadena, Calif.
(HB-7336). $8.30.
Metal finishing guidebook directory for 1968. 874p.
1967. Metals and Plastics Publications, Westwood,
N. J. $2.50.
Mosle, H. G. Anstrichtechnik, v.l: Vorbehandlung
75p. 1967. Hanser, Munich. 7.80 DM.
Coating technique, v.l: preliminary treatment
69

Rathsack, H. A. Schiffsanstriche Korrosion- und Bewuchsschutz
am Schiffsboden. 268p. 1967. Akademie-Verlag,
Berlin.
Coatings of ships corrosion and growth protection of ships
bottoms.
Welding Institute. Protection by sprayed metal coatings,
viii, 61p. 1968. The Institute, London. 15/-.
Wiederhtolt, W., ed. Jahrbuch der Oberflachentechnik,
196S. v.24. 530p. 1967. Metall-Verlag, Berlin.
28.60 DM.
Yearbook of surface technology.
Government Publications
Battelle Memorial Institute, Columbus (Ohio). Surface
treatments for precipitation-hardening stainless
steels, by A. M. Hall. 62p. Apr. 1967. CFSTI:
NASA-SP-5090. Dep.
National Science Foundation. Special Foreign Currency
Science Information Program. Protective metallic
and oxide coatings, metal corrosion and electrochemistry,
by N. P. Fedotev. 532p. 1968. CFSTI:
TT-67-51361.
Picatinny Arsenal. Feltman Research Laboratories,
Dover (N. J.) Fluidized bed polymeric coating of
large steel missile container. Technical report, by
John J. Veliky. 13p. Oct. 1967. CFSTI: AD-661 290:
N68-I2122.
Rensselaer Polytechnic Institute, Troy (N. Y.). Passivation
of crevices during anodic protection, by
W. DeWayne France, Jr. and Norbert D. Greene.
25p. Feb. 1968. CFSTI: AD-665 788.
Anodic coating of stainless steel.
70

V. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Protective action of calcium-magnesium
coating during cathodic protection of steel and iron
in sea water, by Chung-Tao Tai and others. 24p.
Sept. 1967. CFSTL AD-670 297.
U. S. Naval Weapons Laboratory, Dahlgren (Va.).
Explosive welding (cladding) of high temperature
metals to high strength steels: first pltase report.
Technical memo, by R. William Breitzig. 25p. Jul.
1965. CFSTL AD-668 021.
U. S. Office of Saline Water, Washington (D. C).
Study of stabilized spinel films for protection of
mild steel, by N. Michael and others. 31p. Aug.
1967. (Saline water research and development progress
report no. 275). GPO. $0.25.
METALLOGRAPHY
Aaronson, Hubert I., and George S. Ansell, eds. Hightemperature
high-resolution metallography. V.l.
382p. 1966. Cordon and Breach, New York. (Metallurgical
Society Conference no. 38). $25.
Alisova, S. P., and P. B. Budberg. Diagrammy sosto
yaniga metallicheskikh sistem, 1965. 270p. 1968. All-
Union Institute of Scientific and Technical Information,
Moscow. 1R 8K.
Phase diagrams of metallic systems; a collection of diagrams
published in Russian and other scientific journals in
1965.
American Society for Testing and Materials. Fifty
years of progress in metallographic techniques.
408p. 1968. The Society, Philadelphia, Pa. (Special
technical publication no. 430). $25.75.
71

Beachem, C. D. Usefulness of fractography. 21p. n.d.
American Society for Testing and Materials, Philadelphia.
Pa. (Paper no. 46).
Cherepin, Valentin Tikhonovich and A. K. Mallik.
Experimental techniques in physical metallurgy, xi,
428p. 1967. Asia Publishing House, London. (Indian
Institute of Technology. Bombay Series). 60/-.
Dahl, W. Metallographical problems with the hot
working of steels. 32p. 1967. Iron and Steel Institute,
London. (BISI-55S3). £10.
Translated from the German.
Dehlinger, Ulrich. Theoretische ntetallkunde. Ed. 2.
vi, 224p. 1968. Springer-Verlag, Berlin. (Reine und
angewandte Metallkunde in Einzeldarstellungen,
v.13). 38 DM.
Theoretical metallography.
Samuels, L. E. Metallographic polishing by meclianical
methods. 189p. 1967. Pitman, London. $8.40.
Schmidtmann, E., and others. Investigation of the
transformation behavior of iron-manganese alloys
by damping measurements in tlte region of 1 cycle/
sec. 16p. 196S. Iron and Steel Institute, London.
(BISI-5535). £5.10s. ($13.20).
Translated from the German.
Schumann, Hermann. Metallographic. 612p. 1967.
VEB Deutscher Verlag fur Grundstoffindustrie,
Leipzig.
Metallography.
Symposium on Mossbauer effect methodology (3rd),
New York, 1967. 250p. 1967. Plenum, New York.
$12.50.
Wintcrhager. Helmut, and others. Anwendungcn des
72

Elektroncnstrald-Mikroanalysators bei der metallurgischen
Untersuchung von Erzen und Metallen.
24p. 1968. Westdeutscher Verlag, Cologne. (Forschungsberichte
des Landes Nordrhein-Westfalen,
no. 1880). 17 DM.
Application of the electron beam microanalyzer to metallurgical
research on ores and metals.
Government Publications
Atomic Energy Research Establishment, Harwell
(England). Electron probe microanalysis of thin
ox'ule films, by M. J. Bennett and others. 7p. Mar.
1968. CFSTI: AERE-R-5756. Dep. UK.
Boeing Company. Airplane Division. Renton (Wash.).
Micro voids influence metal properties, bv D. Webster.
24p. Jan. 1968. CFSTI: AD-669 212.
Kernforschungszentrum. Institut fiir Reaktorbauele
mcnte. Karlsruhe (West Germany). Physiko-chemische
Beitrage zur metallkundUchen Analyse, by H.
Sundermann. 7Sp. Apr. 1968. KFK-692." Dep.
Physiochemical report on metallurgical analysis.
Louisiana State University, Baton Rouge. Study of
sensitization in types 301 and 304L stainless steels
using Mossbauer spectroscopy, by O. W. Albritton.
23p. June 1968. CFSTI: N68-2531S.
Stanford University. Department of Materials Scien
Stanford (Calif.). Effects of various types of fluid
motion on the structure of ingots, by Sydney O'Hara.
26p. 1966. CFSTL AD-666 046.
U. S. Army Weapons Command. Research and Engineering
Division. Rock Island (III.). Evaluation of
the x-ray diffraction method for determining volume
73

percent of retained austenite in carbon steel. Technical
report, by Richard J. Brinks. 20p. May 1968.
CFSTI: AD-669 243.
U. S. Naval Weapons Laboratory, Dahlgren (Va.).
Investigation of 18 percent nickel maraging steel
welds by transmission electron microscopy, by
Robert W. Lowry. 54p. Oct. 1967. CFSTI: AD-
660 177; N68-11208.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). Potentiostatic metallographic etching experiments,
bv J. B. Buhr and others. 34p. (1965).
CFSTI: ORNL-P-3327. Dep.
TRANSFORMATIONS
Jormalainen, Toivo, and Juha Pietikiiinen. On the
recrystallization of austenite in connection with hotworking
in slightly hypoeutectoul carbon steel. 22p.
1968. Acta Polvtechnica Scandinavica. Stockholm.
lOkr.
Kesslor, Hans. Uber die Natur der Martensit-Austenit-Ritekumwandlung
in einer Fe-Ni-Legierung
mit 32.5% Ni. 134p. 1966. Technische Hochschule.
I lannnver.
Dissertation. On the nature of martensite-austenite transformation
in an Fe-Nt-alloy with 32.5% Ni.
Loreivz. Joachim. Einfluss von Bor, Zirkon und Titan
ttuf die Austenitumwandlung von Chrom-Molybdan-
Stahlen in Zwischcnstufe und Martensitstufe. 45p.
1967. Technische Hochschule, Aachen.
Dissertation. Influence of boron, zirconium and titanium
on the austenite transformation of chromium-molybdenum
steels in the intermediate and martensite stages.
Murry, G.. and A. Constant. Study of the transforma-
74

tion of steels in relation to heat treatment problems.
41p. 1968. Iron and Steel Institute, London. (BISI-
5897). £9.10s.
Translated from the French.
Ovsienko, D. E., ed. Growth and imperfections of
metallic crystals. 268p. 1968. Consultants Bureau,
New York. $30.
Rose, A., and L. Rademacher. Umwandlungen in
Warmfesten Stahlen, Versttcheiner Gleichuichtsdarstellung
der Karbidphasen. 142p. 1967. Westdeutscher
Verlag, Cologne. (Forschungsberichte des
Landes Nordrhein-Westfalen, Nr. 1819). 77.50 DM.
Transformations in high temperature steels, investigation
of an equilibrium representation of the carbide phases.
Shapiro, Stanley. Crystallography of the reverse martensitic
transformation in an iron-nickel alloy. 72p.
1966. UM: Order no. 67-4877. $4 (fs). $3 (mf).
Dissertation. Lehigh University, Bethlehem, Pa.
Symposium (on) transformation and Iiardenability in
steels. 212p. 1967. Climax Molybdenum Co.. New
York.
United States Steel Corporation. Isothermal transformation
diagrams. Ed. 3. 183p. 1966. The Corp.,
Pittsburgh, Pa.
Government Publications
California University. Lawrence Radiation Laboratory,
Berkeley (Calif.) Quantitative investigation of
strain induced strengthening in steel, by Bertrand
de Miramon. 48p. Sept. 1967. CFSTI: UCRL-17849.
Dep.
Dissertation.
California University. Lawrence Radiation Labora-
75

tory, Livermorc (Calif.) Effect of the form of ferrite
on the recrystallization of steel in fractures, by N. N.
Lipchin and others. CFSTI: UCRL-Trans-10227.
Dep. JCL, $1.10 (fs). $0.80 (mf).
Effects of thermal pretreatment and aluminum
nitride on the austenite grain size, by Ladislav
Bezdek. 24p. 1966. CFSTL UCRL-Trans-10228.
Dep. JCL, $2.60 (fs). $1.10 (mf).
•. Oscilloscope investigation of martensite formation
in iron-nickel alloys — explanation of anomalous
potentials, by Heinz Kimmich and Emst
Wachtel. 45p. n.d. CFS'H: UCRL-Trans-10137.
Dep. JCL, $4.60 (fs). $1.55 (mf).
Lehigh University. Department of Metallurgy and
Materials Science. Bethlehem (Pa.). Fine structure
produced by cyclic martensitic transformation. Final
report, bv George Krauss. 6p. Sept. 1967. CFSTI:
AD-659 405; N68-10491.
Tronsformations in iron-nickel alloys.
Mound Laboratory, Miamisburg (Ohio). Carbonyl
process and the evaporation process for the determination
of phase equilibria in the temperature
range of low mobility, toith iron-nickel alloys as
example, bv Theo Heumann and Gerhard Karsten
Muenster. 24p. CFSTL MLM-13S1 (tr). Dep. JCL.
$2.60 (fs).$L10(mf).
Translated from the German (1963).
U. S. Air Force Systems Command. Foreign Technology
Division. Wright-Patterson Air Force Base
(Ohio). Investigation of structural clianges in high
alloy ferrite austenitic steels, bv Sie-si-san and J.
Cadek. 51p. Sept. 1967. CFSTI: N6S-14355; AD-
662 212.
76

Translated from the Russian paper presented at the Symposium
on Stainless Steels, Proguc. Sept. 10-13, 1961.
U. S. National Bureau of Standards, Cryogenics Division.
Boulder (Colo.). Plate-like martensite transformation
in Fe-Ni alloys, bv R. P. Reed. lip. Jan.
1967. CFSTL PB-176585.
Dissertation.
PROPERTIES
Abdallah. Mohamed Joussef. '/-usammenliange zwischen
den mechanischan Eigenschaften und der Gefugeausbildung
von siliziumlegiertem Gusseisen mit
Lamellengraphit nach unterschiedlicher Temperaturfuhrung
und Behandlung der Schmelze. 118p.
1967. Technische Hochschule, Aachen.
Dissertation. The relationship between the mechanical properties
and structure of silicon cast steels containing flake
graphite resulting from varied temperatures and treatment
of the melt-
American Society of Mechanical Engineers. Properties
of weldments at elevated temperatures. 124p.
196S. The Author, New York. $7. (Members $5.60).
. Research Committee on High Temperature
Steam Generation. Behavior of superlteater alloys in
high temperature, high pressure steam; ed. by
George E. Lien. 113p. 1968. The Society, New York.
$6.
Barbadillo. John Joseph de, II. Effect of substitutional
alloying elements on the elevated temperature meclianical
properties of alpha iron. 115p. 1967. UM:
Order no. 67-14932. $5.60 (fs). $3 (mf).
Dissertation. Lehigh University, Bethlehem, Pa.
Bugarcic, H. Einfluss der Feuchtigkeit auf Mechanisch-Chemische
Vorgange bei Reibungs-be-anspruchungen
von ARMCO-Eisen, Einsatz-und Rad­
ii

eifenstald — unter Verwendung einer Neukonstruierten
Reibungsprufmaschine. 122p. 1964. Technische
Hochschule, Aachen.
Dissertation. The effect of moisture on the mechanicalchemical
processes of friction stresses in ARMCO-iron, case
hardening and tire steels using a newly designed friction
tester.
Chimusin, F. F. Nerzavejuscie stali. 797p. 1967. Izdatelstvo
Metallurgiya, Moscow. 3R. 21k.
Stainless steels.
European Atomic Energy Community. Colloquium on
brittle fracture and safety problems in nuclear pressure
vessels, Jan. 11-13, 1966. xxiv, 767p. 1966. The
Author, Brussels. 600 Belgian fr.
Fruehan, Richard James. Thermodynamic properties
of various liquid ferrous alloys. 219p. 1966. UM:
Order no. 67-3069. $9.90 (fs). $3 (mf).
Dissertation. University of Pennsylvania, Philadelphia. Po.
Hall, W. J., and others. Brittle fracture of welded
plate. 360p. 1967. Prentice-Hall, Englewood Cliffs,
N. J. 815.
Iliutsaw, William Olga. Low cycle fatigue strength
investigation of a high strength steel. 54p. 1966. Illinois
University, Urbana. III. UM: Order no. 67fi624.
$3 (fs). $3 (inf).
Dissertation. Illinois University. Urbana. III.
Heck, Carl. Magnetische Werkstoffe und ihre technische
Anwendung. 711p. 1967. Hiithig, Heidelberg.
108 DM.
Magnetic materials and their technical applications. Deals
mainly with non-%ilica and iron-nickel alloys.
llempel, M. Yerformungserscheinungen an der Oberflache
biegcwechselbeanspruchter Austenitischer
78

Stahlproben bei Raumtemperatur. 59p. 1967. Westdeutscher
Verlag, Cologne. (Forschungsberichte
des Landes Nordrhein-Westfalen Nr. 1826). 46.90
DM.
Deformation phenomena on the surface of bending fatigue
stressed austenitic steel test pieces at room temperature.
Hinton, Robert William. Metallurgical studies of fatigue
damage in maraging steel. 123p. 1967. UM:
Order no. 67-11S66. $6 (fs). $3 (mf).
Dissertation. Illinois University, Urbana, 111.
Honeycombe, Robert William Kerr. Plastic deformation
of metals, xiv. 477p. (1968). Edward Arnold,
London. 90/-.
Huizinga, M. Review of high yield steels for welded
structures and pressure vessels. 52p. 1967. Iron and
Steel Institute, London. (BISI-5307). £10. ($24.).
Translated from the Dutch.
Institute of Physics and the Physical Society. Physical
basis of yield and fracture; proceedings of the
second conference on the physical basis of yield and
fracture held at Oxford, Sept. 28-30, 1966. vii. 303p.
The Institute. London. .£4 10s.
International conference on the properties of liquid
metals, Brookhaven, 1966. Parts 1-3. 746p. 1967.
Taylor & Francis, London. (Advances in physics,
v.16, nos. 62-64). £-2. 15s per part.
Kloppel, K., and T. Seeger. Experimentelle und theoretische
Beitrage zum Schadigungsverhalten daucrbeansjnuchter
Vollstabe und Kerbstabe aus St 37
und St 52. iii, 174p. 1967. Technische Hochschule,
Darmstadt. (Veroffentlichungen des Institutes fiir
Statik und Stahlbau der Technische Hochschule,
Darmstadt, v.3). 30 DM.
79

Experimental and theoretical contributions on damage behavior
of notched and unnotched steel specimens (St 37 and
St 52) under continuous load.
Kolb, K., and E. Macherauch. Development of internal
stresses in deformed steels. Pt. I, 24p. Pt. II, 22p.
1967. Iron and Steel Institute, London. (BISI-5405).
Pt. I, £8. ($19.20). Pt. II, £9. ($21.60).
Translated from the German.
Koves, William John. Comparison—plane strain fracture
toughness and the isothermal flow properties
of a structural steel. 43p. n.d. University of Illinois,
Theoretical and Applied Mechanics Dept., Urbana,
111. (Report no. 302).
Krumpholz, R. Vcrschleissversuche zur Frage des Einfhisses
der Meclianisclten Werkstoffeigenschaften
auf das Schleifvarhalten von Schnellarbeitsstahlen.
88p. 1967. Technische Universitat, Berlin.
Dissertation. Wear studies on the question of the influence
of the mechanical properties of materials on the wear of
high-speed steels.
Lettmann. T. '/Aisammcnhang Zwischen Sprodbruchubergangstemperatur.
Probenstarke und Spannungszustand
fur Allgemeine Baustahle. 50p. 1967. Technische
Universitat, Berlin,
Dissertation. Relationship between embrittlement temperature,
tensile strength and stress conditions of general structural
steels.
Maiss, M. Vergleich der Aussagcfahigkeiten von Versuchen
mit Konstanter und mit steigender Belastung
zur Abschatzung des Dauerfestigkeitsverlialtens bei
Stahl. 228p. 1965. Technische Universitat, Berlin.
Dissertation. Comparison of the predictability of experiments
with constant and increasing stress in the evaluation
of fatigue strength behavior in steel.
Metals and Metallurgy Trust. Thermal and high-strain

fatigue; proceedings of an international conference
organized by tlte Institute of Metals in association
with tlte Iron and Steel Institute, .. .London, June
6-7, 1967. vii, 425p. 1967. The Author, London.
(Monograph and report series no. 32). £5/5/-.
Netthoefel, Felix Theodor. Beitrage zur Kenntnis des
Verschleissverlialtens von Gesenstahlen. 112p. 1965.
Technische Hochschule, Hannover.
Dissertation. On the wear properties of die steels.
O'Shea, Robert P. Effects of strain tempering on tlie
toughness of martensitic steels. 157p. 1967. UM:
Order no. 67-13727. $7.40 (fs). $3 (mf).
Dissertation. I IT Research Institute, Chicago, III.
Patterson, W., and G. Dietzel. Beitrag zur Frage von
Eigenspannungen im Grauguss. 78p. 1967. Westdeutscher
Verlag, Cologne. (Forschungsberichte des
Landes Nordrhein-Westfalen no. 1818). 53 DM.
Contribution on the question of residual stresses in grey
cast iron.
Patterson, W., and W. Standke. Bestimmungsverfahren
und Grosse der Schlagzahigkeit von Gusseisen
mit Lamellengraphit. 41p. 1967. Westdeutscher
Verlag, Cologne. (Forschungsberichte des Landes
Nordrhein-Westfalen Nr. 1808). 26.60 DM.
Methods to determine and values of the impact strength
of cast iron with lamellar graphite.
Speckhardt, Helmut. Uber den Einfluss spangebender
und elektrochemisclter Bearbeitung auf das Verhalten
eineger Stahle unter mechanisclier und chemischer
Beanspruchung. 49, viiip. 1967. Technische
Hochschule, Darmstadt.
Dissertation. On the influence of machining and electrochemical
processing on the behavior of steel alloys under
mechanical and chemical stress.
31

Terrington, John Stanley. Combined bending and torsion
of beams and girders: the calculation of stresses
in beams and girders due to simultaneous transverse
bending and torsion. Pt. 1. 103p. 1968. British Constructional
Steelwork Association, London. (Publication
no. 31, pt. 1). 5/-.
Thygesen, Kenneth Helmer. Effect of plastic deformation
on the electrical resistivity of nickel and iron.
86p. 1967. UM: Order no. 67-12511. $4.60 (fs). $3
(mf).
Dissertation. Clarkson College of Technology, Potsdam.
N. Y.
Timoshenko, Stephen, and D. H. Young. Elements of
strength of materials. Ed. 5. x, 377p. cl968. Van
Nostrand, Princeton, N. J. $7.75.
Touloukain. Y. S., and others. Tltermophysical properties
research literature retrieval guide. Ed. 2. 3v.
(1968?). Plenum, New York. $275.
Uebing, Dietrich. Werkstoffverlmlten bei ruhender
und schwellcnder Inendruckbeanspruchung. 40p.
1967. Verlag Stahleisen. Dusseldorf. 24 DM.
Material behavior under constant and increasing internal
stress.
Van der Sluys, William Alan. Mechanisms of environment
induced subcritical flaw growth in AIS1 4340
steel. 45p. 1966. UM: Order no. 67-6761. $3 (fs).
$3(mf).
Dissertation. Illinois University. Urbana, III.
Walker, E. F., and M. J. May. Single-edge notch specimens
of two high strength martensitic steels tested
in tension and bending. 1967. British Iron and Steel
Research Association, London. (Collaborative fracture
toughness test programme). (MG/EB/337/67).
82

Wobst, K. Untersuchungen zur Sprodlruchneigung
von unlegierten kohlenstoffarmen Baustahlen unter
besonderer Berucksichtigung Hirer Korngrossen und
Hires mecltanisclten Dampfungsverlialtens im kHz-
Bereich. 126p. 1967. Technische Universitat, Berlin.
Dissertation. Studies on brittle fracture tendency of unalloyed
low-carbon structural steel with special reference
to grain size and mechanical damping in the kHz-range.
Government Publications
Aerospace Corporation. Lab Operations, El Segundo
(Calif.). Dynamic sliear stress-strain-strain rate relations
of iron, by Charles C. S. Yen and Ching H.
Yew. 27p. Nov. 1967. CFSTI: AD-664 888.
. Hydrogen-stress cracking of 17-4PH stainless,
by Louis Raymond and Ernest G. Kendall. 26p.
Aug. 1967. CFSTI: AD-661 958.
American Optical Company. Space Defense Group,
Pittsburgh (Pa.). Study of the use of 304L stainless
steel as an optical reflecting element. Final report.
lip. 1967. CFSTI: N68-17616.
Ames Laboratory, Ames (Iowa). Plastic deformation
behavior of long range ordered iron-aluminum alloys,
by Harry John Leamy. 166p. Aug. 1967.
CFSTI: IS-T-180. Dep.
Dissertation. Iowa State University of Science and Technology,
Ames, Iowa.
Argonne National Laboratory, Lemont (111.). Stress
rupture and creep behavior of austenitic Cr-N\
steels in the presence of Na, by H. Boehm and II.
Schneider. 14p. 1967. CFSTI: N68-35724.
Translated from the Dutch.
83

Atomits International, Canoga Park (Calif.). Biaxial
stress-rupture properties of austenitic stainless steels
in static sodium, by W. T. Lee. 52p. June 1968.
CFSTI: AI-AEC-12694. Dep.
. Helium embrittlement in type 304 stainless
steel, by D. Kramer and others. 31p. Dec. 1967.
CFSTI: NAA-SR-12601. Dep.
Aztec School of Languages, Inc., Acton (Mass.).
Structural factors responsible for the selectivity of
the adsorption mecltanism producing a loss of
strength in metals, by V. M. Zalkin. 5p. Oct. 1968.
CFSTI: N68-36320.
Translated from the Russian.
Battelle Memorial Institute, Columbus (Ohio). Effects
of low temperatures on mechanical properties of
structural metals, by H. L. Martin and others. Rev.
and enlarged ed. 70p. 1968. (NASA-SP-5012(01).
GPO. $0.50.
. Investigation of tlte initiation and extent of
ductile pipe rupture. Quarterly progress report, July-
Sept. 1967, by Robert J. Eiber and others. 16p. Oct.
1967. CFSTI: BMI-1817. Dep.
Tests conducted on 24 in. OD A106B carbon steel pipe.
-. Defense Metals Information Center, Columbus
(Ohio). Rupture strengtlis of selected high-iron
nickel-base, cobalt-base, and refractory metal alloys,
by W. F. Simmons. 18p. May 1968. CFSTI:
AD-670 153.
Battelle-Northwest. Pacific Northwest Laboratory,
Richland (Wash.). Subcritical cracking of titanium
alloys and high-strength steels in organic environments,
by R. G. Rowe. 12p. July 1967. DTIE-
BNWL-SA-1134.
84

From Seminar on Accelerated Cack Propagation in Titanium,
Columbus, Ohio.
Bettis Atomic Power Laboratory, Pittsburgh (Pa.).
Fracture toughness of non-irradiated and irradiated
reactor vessel steels, by M. L. Parrish and D. J.
Seman. 92p. Mar. 1968. CFSTI: N68-28987.
Boeing Company. Commercial Airplane Division, Renton
(Wash.). Investigation into the relationship between
precracked Cltarny W/A and plane strain
fracture toughness for /tig/i strength steels, by C. S.
Carter. 22p. May 1968. CFSTI: AD-671 439.
Boeing Scientific Research Laboratories. Solid Sta
Physics Laboratory, Seattle (Wash.). Crack extension
by alternating shear, by F. A. McClintock and
R. M. N. Pelloux. 32p. Feb. 1968. CFSTI: AD-669
531.
Brookhaven National Laboratory, Upton (N. Y.). Effect
of microstructttre on the elevated temperature
ductility of irradiated austenitic stainless steels, by
J. G. Y. Chow. 13p. (1967). CFSTI: BNL-12439.
Dep.
Brown University, Providence (R. L). Effect of sur
face condition on the exltaustion of ductility by cold
or hot straining. Progress report no. 7, by J. Dvorak
and C. Mylonas. 46p. July 1968. CFSTI: AD-672
897.
Brown University. Division of Engineering, Provide
(R. I.). Combined macroscopic and microscopic approach
to the mechanical properties of metals. Technical
progress report, Feb. 1967-Jan. 1968, by D. C.
Drucker and others. lOp. Jan. 1968. CFSTI: N68-
23789.
85

. Experimental study of the strengtltening mechanism
and fracture beltavioi of splteroidized carbon
steels, by C. T. Liu. CFSTI: NYO-2394-28. Dep.
. Notch brittleness after prestraining. Final
technical report (fxirt 3), by C. Mylonas and S.
Kobayashi. 56p. June 1968. CFSTI: AD-673 089.
Plastic deformation in brittle and ductile
fracture, by D. C. Drucker and J. R. Rice. 56p. Julv
196S. CFSTL AD-674 852.
California Institute of Teclmology. W. M. Keck Lab
oratory of Engineering Materials, Pasadena (Calif.).
Temperature dependence of the magnetization of
an amorphous ferromagnet. Research and development
report no. 53, by C. C. Tsuei and others. 17p.
Jan. 196S. CFSTL CALT-221-38. Dep.
California Univ. Lawrence Radiation Lab., Berkeley
(Calif.). Effect of a strain induced transformation
on the toughness of high strength materials, by
Christian Pierre Laporte. 50p. Sept. 1967. CFSTL
UCRL-i.7810. Dep.
. Strength and ductility of metastable austenitic
steels as a function of composition and test temperatures,
by Govind Ram Chanani. 74p. Sept. 1967.
CFSTI: UCRL-17S05. Dep.
Centre National de Recherehes Metallurgiques, Lieg
(Belgium). Study of embrittlement by plastic fatigue
of steels for reactor vessels. Final report no. 1,
v.2, by R. V. Salkin and P. E. Lagasse. 128p. July
1967. CFSTL EURAEC-1892. Dep.
Chantiers de l'Atlantique Saint-Nazaire (France).
Mechanical properties of steels. Quarterly report
86

Apr. 1-June 30, 1967. 3p. July 1967. CFSTL N68-
10858.
College of Aeronautics, Cranfield (Eng.). Weld heat
affected zone structure and properties of QT 35
steel, by M. D. Coward and others. 25p. Mar. 196S.
CFSTI: N68-28384.
Columbia University. Department of Civil Engineering
and Engineering Mechanics, New York. Investigation
of high strength steels under history program
fatigue, part 1, by J. Branger and M. Ronay.
129p. Feb. 1968. CFSTL AD-674 880.
Columbia University. Henry Kruinb School of Mines,
New York. Damping in deformed iron containing
interstitial impurities. Technical report, by Birendra
N. Agarwala. 145p. Mar. 1968. CFSTI: AD-66S
173.
France. Commissariat a 1'Energie Atomique. Centre
d'Etudes Nucleaires. Grenoble (France). Contribution
a letude de la diffusivite thermique des
solides, by Karl Zankel. 52p. 1967. CEA-R-3150.
Dep.
Dissertation. Contribution to the study of thermal diffusivity
of solids.
Frankford Arsenal. Pitman-Dunn Research Labs,
Philadelphia (Pa.). Some fractographic observation
of fatigue crack growth in maraging steel, by
Carl M. Carman and Mary F. Schuler, 39p. Nov.
1967. CFSTL AD-666 187.
General Dynamics/Convair, San Diego (Calif.).Onset
of creep stress measurement of metallic materials:
creep tests with titanium alloys, precipitation hardening
stainless and maraging steels. 423p. Nov. 1967.
CFSTI: N68-11935.
87

General Electric Company. Atomic Power Equipment
Department, San Jose (Calif.). Fatigue crack
growth in nuclear reactor piping steels, by A. J.
Brothers. 56p. Mar. 1968. CFSTI: GEAP-5607. Dep.
. Reactor primary coolant system rupture study.
Quarterly progress report no. 9. S8p. Aug. 1967.
CFSTI: GEAP-5512. Dep.
•. Reactor primary coolant system rupture study.
Quarterly progress report no. 10, Jul.-Sept. 1967.
134p. 1967. CFSTI: GEAP-5554. Dep.
Georgia Institute of Technology. Engineering Experiment
Station. Atlanta (Ga.). Study of impact
effects on spherical shells. Part II. A theoretical and
experimental study of the response of spherical
shells to impact loads, by John C. Simonis and
Charles E. Stoneking. 2S4p. Dec. 1966. CFSTI: SC-
CR-67-2540. Dep.
Government Publications
Illinois University. Department of Civil Engineering,
Urbana (III-). Effect of repeated loads on the low
temperature fracture behavior of notched and welded
plates. Final report, bv W. H. Munse and others.
56p. Nov. 1967. CFSTL AD-663 572.
Illinois Univ. Department of Theoretical and Appli
Mechanics. Urbana (111.). Cumulative fatigue damage
under cyclic strain control. Final report, Feb. 1-
Apr. 30, 1967. by T. H. Topper and others. 35p.
June 1967. CFSTI: AD-659 302.
. Environmental cracking in AISl 4340 steel.
Final report, by W. A. Van Der SIuvs. 20p. Feb.
1968. CFSTI: AD-669 255.

Iowa State University of Science and Technology,
Ames (Iowa). Plastic deformation behavior in ironsilicon
alloys, by Gordon Everett Lakso. 118p. Nov,
1966. CFSTL N6S-12723.
Dissertation.
Knolls Atomic Power Laboratory, Schenectady
(N. Y.). Fatigue-crack growth rate studies of low
alloy pressure-vessel steels, by D. F. Mobray and
others. 29p. Feb. 1968. CFSTI: KAPL-P-3439. Dep.
. Fatigue crack growth rate studies of nuclear
pressure-vessel steels, by D. F. Mobray and W. R.
Andrews. 23p. Aug. 1967. CFSTL KAPL-3383. Dep.
Lehigh University. Fritz Engineering Laboratory,
Bethlehem (Pa.). Beltavior of large A514 steel
bolted joints, by Goeffrey L. Kulak and John W.
Fisher. 36p. Feb. 1968. CFSTI: PB-178 853.
Girder web boundary stresses and fatigue.
Progress report, by J. A. Mueller and B. T. Yen. 84p.
Jul. 1967. CFSTI: N68-21389.
-. Welded built-up columns, by Lambert Tall.
). Apr. 1966. CFSTI: PB-176 714.
Study of strength and mechanical properties of welded
columns of structural carbon steel.
Lockheed-California Company, Burbank (Calif.).
Fracture toughness aiul crack propagation of 300 M
steel, by S. L. Pendleberry and others. 258p. Aug.
1968. DS-68-18.#
Los Alamos Scientific Laboratory, Los Alamos (N.
Mex.). Permeation and diffusion of nitrogen, oxygen,
and rare gases through stainless steel: a bibliography,
bv Jean Furnish, comp. 5p. Jan. 1968.
CFSTI: LA-3909. Dep.
89

Martin, Company, Denver (Colo.). Effect of vacuum
environment on the meclianical beltavior of materials.
Annual report, by Harold Shen. 36p. Dec. 1967.
CFSTI: AD-665
Experiments with aluminum and titanium alloys and
Armco iron.
Massachusetts Institute of Technology, Cambridge,
Mass. Investigation of fracture in connection with
hot deformation processing of metals. Final report,
bv Nicholas J. Grant and others. 29p. Dec. 1966
CFSTL AD-64S 451.
Materials Research Laboratory, Inc., Glenwood (III.
Development of test procedures. Fracture toughness
of reactor pressure vessel steels, by E. J. Ripling and
P. B. Crosley. 24p. Dec. 1967. CFSTI: COO-1477-9.
Dep.
Mechanical Properties Data Center, Traverse City
(Mich.). Aerospace structural metals liandbook.
Volume 1: ferrous alloys, by William F. Brown, Jr.
81p. Mar. 1968. Materials Engineering, New York.
Mctaalinstituut TNO, Delft (Netherlands). Influenc
of plate thickness, applied stress, and temperature
on brittle fracture beltavior in the Robertson test.
Progress report, Oct. 1-Dec. 31, 1967, by B.Q. M.
Westgeest and H. C. van Elst. 19p. Jan. 1968.
CFSTL EURAEC-1987. Dep.
Montreal University. Division of Applied Mechanics
Quebec. Creep fatigue of pressure vessel steel, by
J. Dubuc and A. Biron Risley. 63p. 1967. TRG-1537
(C/X).«
National Science Foundation. Special Foreign Currency
Science Information Program, Washington
90

(D. C). Effect of high hydrostatic pressures on the
yield stress of stretched carbon steel specimens, by
Marek Brandes. 9p. 1968. CFSTI: TT-67-56038.
Translated from the Polish
National Technical University. Laboratory for Test
ing Materials, Athens (Greece). Effect of torsional
prestrain on the embrittlement of mdd steel, by
Pericles S. Theocaris. 24p. June 1967. CFSTI: AD-
664 598.
Saarland University. Institute for Metal Physics a
Metallurgy, Saarbrucken (West Germany). Tensile
properties of nearly interstitial-free sttbstitutional
iron alloys. Technical report, 1 Sept. 1962-31 Dec.
1966, by W. Dickenscheid. 92p. Feb. 1968. CFSTI:
AD-670 208.
Stanford University. Department of Materials Scien
Stanford (Calif.). Meclianics of crack arrest in
mild steel, by T. R. Wilshaw and D. O. Harris. 16p.
Nov. 1967. CFSTI: AD-664 174.
TRW, Inc., Cleveland (Ohio). Literature survey on
the influence of alloy elements on tlte fracture
toughness of high strength steels. Interim report,
Jul.-Sept. 1967, by E. A. Steigerwald and C. Vishnevsky.
67p. Feb. 1968. CFSTI: AD-665 432.
Technion-Israel Institute of Technology. Material
chanics Laboratory, Haifa. Discontinuous yielding
of metastable austenitic stainless steel, by J. Barucn
and others. 31p. Aug. 1967. CFSTI: AD-659 368.
Technische Hochschule Munich. Institut fur Technische
Mechanik, Munich (West Germany). Stress
concentration with fatigue loading. Final report
91

Jan.-Dec. 1966, by Heinz Neuber and Ludwig
Bertele. 52p. Jan. 1967. CFSTI: AD-668 774.
U. K. National Engineering Laboratory, Glasgow
(Scotland). Correlation of a fracture mechanics
parameter with mecltanical properties for highstrength
steels, by L. P. Pook. 46p. Apr. 1966. NEL-
225."
U. K. National Lending Library for Science and Tec
nology, Boston Spa (England). Coefficient of thermal
expansion of constructional materials at low
temperatures, by A. K. Belov. 5p. July 1968. NLL:
Transl. 68/217.
Translated from the Russian.
Develojyment of dislocation structure in the
surface layers of metals under some types of load,
by B. I. Kostetskii and V. V. Shevelya. 9p. July
1968. NLL: Transl. 68/157.
Translated from the Russian. Studies performed on 18/9/
Ti stainless steel.
Investigations into tlte influence of surface
treatment on fatigue properties of steel, by A. Buch
and J. Chodorowski. 3p. Oct. 1967. NIX: Transl.
67/257.
Translated from the German.
-. Theoretical study of the mechanical propertie
of sintered steel, bv M. Eudier. 20p. July 1968.
NLL: Trans. 68/190.
Translated from the German.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Experimental investigation of effect of vacuum
on process of contact failure of steels, by S. V.
9?

Pinegin and V. M. Cudchenko. 18p. June 1967.
CFSTL AD-668 926.
•. Experimental investigation of plastic deformations
under complex loads, by G. A. Doshchinskii
and V. I. Maksak. 14p. Dec. 1967. CFSTI: AD-674
699.
Translated from the Russian.
Selection of die steels for high-speed metalforming
tools, by Yu. P. Sogrishin and others. 13p.
Sept. 1967. CFSTI: AD-673 821.
Translated from the Russian.
U. S. National Aeronautics and Space Administration.
Langley Research Center, Langley Station
(Va.). Effects of long-time environmental exposure
on mechanical properties of sheet materials for a
supersonic transport, by Richard A. Pride and others.
26p. Mar. 1968. CFSTI: N68-17897.
U. S. National Aeronautics and Space Administration.
Lewis Research Center, Cleveland (Ohio). Application
of a meiftod of estimating high temperature
low cycle fatigue behavior of materials, by
C. R. Halford and S. S. Manson. 26p. 1967. CFSTI:
N67-29653.
-. Effect of residual stress on fracture strength
AIS1 301 stainless-steel and Ti-5 Al-2.5Sn ELI titanium
cracked thin-wall cylinders, by Frederich D.
Calfo. 24p. 1968. CFSTI: NASA-TN-D-4777.
U. S. Naval Research Laboratory, Washington (D. C)
DSSP program on high-strength materials evaluation
of 350 Ksi, 18% nickel maraging steel. Memorandum
report, by F. R. Stonesifer and H. L. Smith. 14p.
Dec. 1967. CFSTI: AD-664 944.
93

Deep Submergence Systems Project study of a material
for possible use in the pressure hull of a deep submergence
vehicle at depths up to 20,000 ft
. Effect of side grooves and fatigue crack length
on plane-strain fracture toughness, by C. N. Freed.
20p. Dec. 1967. CFSTI: AD-663 884.
-. Fatigue crack propagation and fracture studie
of a pressure vessel steel temper embrittled to simulate
irradiation damage. Memorandum report, by
T. W. Crooker and others. 17p. Oct. 1967. CFSTI:
AD-663 133.
Fracture development and material properties
in PVRC-Penn State pressure vessel. Memorandum
report, by L. A. Cooley and E. A. Lange. 26p.
Oct. 1967. CFSTI: AD-663 203; N68-15553.
Metallurgical characteristics of high strength
structural materials. Progress report no. 12, Jul.
1966-Jan. 1967, by R. J. Goode and others. 137p.
Sept. 1967. CFSTI: AD-662 189.
Tensile properties of selected steels for use
in nuclear reactor pressure vessels. Phase I of final
report. 59p. Dec. 1967. CFSTI: AD-664 460.
U. S. Department of the Navy. Washington (D. C).
Cold brittleness and maximum plasticity of metals in
shipbuilding, by E. M. Shevandin and I. A. Razov.
356p. Aug. 1967. CFSTL AD-659 191.
Translated from the Russian.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). In-reactor and post-irradiation creep-rupture
properties of type 304 stainless steel at 650"C,
by E. E. Bloom. 23p. Mar. 1968. CFSTI: ORNL-
TM-2130. Dep.
94

U. S. Ship Structure Committee, Washington (D. C).
Metallurgical structure and brittle beltavior of steel,
by Morris Cohen. 30p. May. 1968. CFSTI: SSC-183.
Westinghouse Electric Corporation, Lima (Ohio).
Properties of magnetic materials for use in hightemperature
space power systems, by P. E. Kueser
and others. 325p. 1967. CFSTI: N68-17624. $0.65
(mf). GPO. $2.25 pa.
. Aerospace Electrical Division, Lima (Ohio).
Development and evaluation of magnetic and electrical
materials capable of operating in the 800° F to
16O0°F temperature range. Quarterly report, June
1-Aug. 31, 1966, by P. E. Kueser. 127p. Sept. 1966.
CFSTI: N67-39389.
Atomic Power Division, Pittsburgh (Pa.).
Fracture mechanics evaluation of reactor vessel
steels. Quarterly progress report period ending
Sept. 30, 1967. 22p. Oct. 1967. CFSTI: N68-16832.
-. Atomic Power Division, Pittsburgh (Pa.).
Fracture mechanics evaluation of reactor vessel
steels. Quarterly progress report, period ending 31
Dec. 1967. 18p. Jan. 1968. CFSTI: N68-23424.
-. Atomic Power Division, Pittsburgh (Pa.).
Fracture mechanics evaluation of reactor vessel
steels. Quarterly progress report for the period
ending March 31, 196S. 12p. Apr. 1968. CFSTI:
WCAP-3677-7. Dep.
ATOMIC AND NUCIEAR PHYSICS
American Society for Metals. Atomic aitd electroni
structure of metals; papers presented at a seminar of
the American Society for Metals, Oct. 29-30,1966. x,
259p. 1967. The Society, Metals Park, Ohio. $12.50.
95

Battelle Memorial Institute, Columbus (Ohio). Irradiation
effects in reactor cladding materials. 42p.
n.d. BMI-1809, Sect. B.e
Colloque de Metallurgie, 10th, June 23-24, 1966.
Fragilite et effets de Tirradiation. iv, 246p. 1967.
Presses Universitaires de France, Paris.
Brittleness and irradiation effects.
European Atomic Energy Community. Kolloquiums
uber Sprodbruch und die Sicherlteit in Kernreaktordruckbehaltern,
Brussels, January 11-13, 1966.
SUzungsberichte. xxiv, 765p. 1966. The Author,
Brussels. 600 Belgian fr.
Colloquium on brittle fracture and safety problems in
nuclear reactor pressure vessels.
Holden, Abe Noel. Dispersion fuel elements, x, 255p.
cl967. Gordon and Breach, New York. (Monograph
series on metallurgy in nuclear technology). $10.50.
Prepared under the direction of the American Society for
Metals for the Division of Technical Information. United
States Atomic Energy Commission.
Kaminsky, Manfred. Atomic and ionic impact phenomena
on metal surfaces, xii, 402p. 1965. Academic
Press, New York. (Struktur und Eigenschaften der
Materie no. 25). $14.50.
Translated from the German.
Konobeevskii, S. T., ed. Deistvie ioniziruyuschchikh
izluchenii na metally i splavy, 116p. 1967. Atomizdat,
Moscow.
Ionising radiation effects on metals and alloys.
Salkin, R. Aspects pratiques de leffet des radiations
neutroniques sur les proprietes des metaux. 28p.
(1967?). Institut Beige de la Soudure, Brussels.
Practical aspects of the effect of neutron radiation on the
properties of metals.
96

Government Publications
Akticbolaget Atomenergi, Stockholm (Sweden). Irradiation
effects at 160°C to 240"C in some Swed­
ish pressure vessel steels, bv M. Grounes and othe
3So. Sept. 1967. CFSTI: AE-298; N67-40143. Dep.
SWED.
Atomics International, Canoga Park (Calif.). Heliu
embrittlement of type 316 stainless steel, by D.
Kramer and others. 31p. Apr. 1968. CFSTI: AI-
AEC-12670. Dep.
Battelle Institute, Geneva (Switzerland). New meth
ods for physical interpretation of time-to-rupture
tests. Special report no. 3, by W. Siegfried. 165p.
Aug. 1967. CFSTL EURAEC-1908. Dep.
. Research to determine the long-term mechanical
properties of metals subjected to mechanical
stress at elevated temperatures and neutron irradiation.
Final report, by W. Siegfried and S. Zimering.
61p. July 1967. CFSTL EURAEC-1921. Dep.
Battelle Memorial Institute, Columbus (Ohio). Effe
of large fast fluenccs on mechanical properties of
type 347 stainless steel and aluminum, by Mihkel
Kangilaski and others. 36p. Mar. 1968. CFSTI: BMI-
1S34. Dep.
. Radiation Effects Information Center, Columbus
(Ohio). Effects of neutron radiation on structural
materials, by M. Kangilaski. 245p. June 1967.
CFSTI: N68-16S76.
Battelle-Northwest. Pacific Northwest Laboratory,
Richland (Wash.). Irradiation effects on reactor
97

structural materials. Quarterly progress report, Feb.-
Apr. 1967. 272p. May 1967. CFSTI: BNWL-455.
Dep.
Irradiation effects on reactor structural materials.
Quarterly progress report, May-July 1967, ed.
by T. T. Claudson. 241p. Aug. 1967. CFSTI: BNWL-
532. Dep.
Irradiation effects on reactor structural materials.
Quarterly progress report, Nov.-Dec. 1967
ami Jan. 1968, by T. T. Claudson, ed. 257p. Apr.
196S. CFSTI: BNWL-710. Dep.
. Irradiation-induced embrittlement in stainless
steel at elevated temperature, by M. Kangilaski
and others. 6p. July 1968. CFSTL BNWL-SA-1996.
Dep.
Postirradiation tensile beltavior of 300 series
stainless steels, by J. J. Holmes and others. 27p.
May 1968. CFSTI: BNWL-SA-1455. Dep.
European Atomic Energy Community, Brussels (B
gium). Steels with reduced sensitivity to neutron-embrittlcment:
a safety factor, by J. Sebille. 42p. Sept.
1967. EUR-339e/
France. Commissariat a 1'Energie Atomique. Centre
d'Etudes Nucleaires. Grenoble (France). Interactions
entrc les impuretes et les defauts crees par
irradiation dans le fer. 105p. Jan. 1968. CEA-R-
3280. Dep.
Interactions between impurities and defects created by
irradiation in iron.
General Dynamics Corporation. General Atomic Division,
San Diego (Calif.). Research program on the

effect of substructure on the irradiation stability of
ASTM A302 grade B steel. Final report, by T. A.
Trozera and P. W. Flynn. CFSTI: GA-8064. Dep.
General Electric Company. Vallecitos Nuclaar Center,
Pleasanton (Calif.). Grain boundary studies of
austenitic stainless steels, by J. S. Armijo. 20p. Sept.
1967. CFSTI: GEAP-5503. Dep.
Grumman Aircraft Engineering Corporation. Research
Department, Bethpage (N. Y.). Nuclear probe
microanalysis of carbon in steel: an experimental
study of the applicability of the C"(p,

. Research on high-temperature embrittlement
of 16/13 CrNi steels after neutron irradiation, by
H. Boehm and others. 18p. n.d. CFSTI: EURFNR-
464. Dep.
Societa Ricerche Impianti Nucleari. Centro Ricerch
Nucleari, Saluggia (Italy). Influence of nitrogen in
iron and steel under fast neutron irradiation. Quarterly
report no. 7, Apr. 1-June 30, 1967, by F. S.
Rossi. 8p. July 1967. CFSTI: EURAEC-1919. Dep.
Influence of nitrogen in iron and steel under
fast neutron irradiation. Quarterly report no. 8, July
1-Sept. 30,1967. 7p. March 1968. CFSTI: EURAEC-
2028. Dep.
Influence of nitrogen in iron and steel under
fast neutron irradiation. Quarterly report no. 9,
Oct. 1-Dec 31, 1967. 9p. May 1968. CFSTI:
EURAEC-2037. Dep.
U. K. Atomic Energy Authority. Reactor Group,
Springfields (England). Review of tlte likely fatigue
behavior of irradiated stainless steel, etc., by J. H.
Gittus. lOp. Oct. 1966. (Reprinted 1968). CFSTI:
TRC-IUport-1353. Dep. U. K. Is 9d.
U. S. Air Force Systems Command. Foreign Technology
Division, Wright-Patterson Air Force Base
(Ohio). Effect of neutron radiation of certain
mechanical and structural properties of austenitic
chrome nickel steel, by Jiri Cervasek and Jan Kutka.
14p. 1965. CFSTI: AD-467 249.
Translated from the Czech.
. Softening of cast iron by irradiation with neutrons,
by Ye. A. Markovskii and M. M. Krassnosche-
100

kov. 8p. Aug. 1967. CFSTL AD-662 789; N68-
15895.
Translated from the Russian.
U. S. National Aeronautics and Space Administration,
Langley Research Center, Langley Station (Va.).
Experimental study of transmission and backscatter
of 0.075 to 1.0 MeV electron by aluminum and
stainless steel, by William E. Miller and Herbert D.
Hendricks. 22p. Mar. 1968. CFSTI: N68-17898.
U. S. Naval Research Laboratory, Washington (D. C.).
Availability of data on irradiated materials as related
to design requirements for water cooled reactor
pressure vessels. Final report, by J. R. Hawthorne
and F. S. Loss. 31p. Aug. 1967. CFSTL AD-
663 879.
. Effects of coupling nuclear radiation with
static and cyclic service stresses and of periodic
proof testing on pressure vessel material behavior,
by J. R. Hawthorne and F. J. Loss. 39p. July 1967.
CFSTI: NRL-6620. Dep.
-. Irradiation effects on reactor structural materials.
Quarterly progress report, Aug. 1-Oct. 31,
1966, by L. E. Steele and others. 30p. Nov. 1966.
CFSTI: AD-646 662.
-. Irradiation effects on reactor structural materials.
Quarterly progress report. May 1-July 31,
1967, by J. Russell Hawthorne and others. 47p. Aug.
1967. CFSTI: AD-661 229.
Irradiation effects on reactor structural materials.
Quarterly progress report, Aug. 1-Oct. 31,
1967 by J. Russell Hawthorne and others. 52p. Nov.
1967' CFSTI: AD-663 888.
101

. Irradiation effects on reactor structural materials.
Quarterly progress report, Nov. 1, 1967-Jan.
1968, bv J. Russell Hawthorne and others. 51p. Feb.
1968. CFSTL AD-667 464.
•. Yankeee reactor pressure-vessel surveillance:
notch ductility performance of vessel steel and maximum
service fluence determined from exposure
during cores II, III, and TV, by Charles Z. Serpan,
Jr., and J. R. Hawthorne. 38p. Sept 1967. CFSTI:
AD-661 803.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). Program of the radiation metallurgy section,
solid state section. Oak Ridge National Laboratory,
by M. S. Wechsler. 49p. Feb. 1968. CFSTI:
ORNL-TM-2059. Dep.
Research on radiation damage of pressure vessel steels.
iron alloys and refractory metals.
. Radiation metallurgy section, solid state division
progress report for period ending July 1967.
63p. Nov. 1967. CFSTI: ORNL-4195. Dep.
Investigation of radiation embrittlement of weld heat-affected-zone
samples and base-plate samples of ASTM A-
212B pressure vessel steel as a function of radiation dose
and temperature.
-. Radiation metallurgy section, solid state division
progress report for period ending January
1968. 116p. Apr. 1968. CFSTI: ORNL-4246. Dep.
CORROSION
American Society for Testing and Materials. Metal
corrosion in the atmospltere. 391p. 1968. The Society,
Philadelphia, Pa. (Special technical publication
no. 435). $30. (Members $24.).
. Stress corrosion testing. 338p. 1967. The So-
102

ciety, Philadelphia, Pa. (Special technical publication
no. 425). $25.
Bartonicek, R., and others. Koroze a protikorozni
ochrana kovu. 719p. 1966. Ceskoslovcnske Akademie
Ved, Prague. 64 Kcs.
Corrosion and protection of metals.
Cleary, Harold Joseph. Electrochemical corrosion properties
of iron and steel. 57p. 1967. UM: Order no.
67-12833. $3 (fs). $3 (mf).
Dissertation. Rensselaer Polytechnic Institute, Troy, N. Y.
Corrosion of metals and alloys. Collection no. 2; translated
by A. D. Mercer; ed. by C. J. L. Booker. 2v.
458p. 1967. National Lending Library for Science
and Technology, Boston Spa. Yorks (England).
(Translations of Russian books). 21/3 each volume.
Originally published as Korroziia metaltov i sptavov,
sbornik 2. Metallurgizdat, Moscow. 1965.
Dufils, M., and R. Tournier. Protection des materiaux:
annee technique de lanticorrosion 1968. Ed. 5. 522p.
1968. Synthese Editeur, Paris.
Protection of materials: anticorrosion technical year 1968.
Eberius, E., and W. Schwenk, eds. Elementbildung
und korrision; Bericht uber die Diskussionstagung
1965 des Korrosionsausschusses der Deutschen Gesellschaft
fur Metalkunde. A4. 171p. 1967. Verlag
Chemie, Weinheim/Bergstrosse. 48 DM.
Microstructure and corrosion.
Edstrom, J. O., and B. Lofblad. Steels for intricate
corrosion problems in tlte cltemical industry. 21p.
1968. Iron and Steel Institute, London. (BISI-6525)
£7.
Translated from the German.
103

European Federation of Corrosion. Symposium Europeen
stir les inhibiteurs de corrosion, 2v. 1966. Universita
Degli Studi de Ferrara. Ferrara, Italy.
Fontana, Marsello Guldo, and N. D. Greene. Corrosion
engineering. 391p. 1967. McGraw-Hill, New York.
$12.50.
France, Walter de Wayne, Jr. Controlled potential investigations
of localized corrosion pltenomena. 79p.
1966. Rensselaer Polytechnic Institute, Troy, N. Y.
UM: Order no. 67-4167. $4.20 (fs). $3 (mf).
Dissertation.
Gnnther, Henry Herman. Attack of steel by hydrogen
at high temperature and high pressure. 225p. 1967.
UM: Order no. 67-12748. $10.15 (fs). $3 (mf).
Dissertation, Pennsylvonia University, Philadelphia.
Haus der Technik. Korrosiotisschutz von Stahlbauwerken
durch Anstricltstoffe; Tagung vom 4 April 1967.
S2p. 1967. Vulkan-Verlag, Essen. (Vortragsverdffentlichungen.
Haus der Technik no. 138). 18.60
DM.
Corrosion protection of steel structures by means of coatings.
International Atomic Energy Agency. Alkali metal
coolants; proceedings of the symposium on alkali
metal coolants — corrosion studies and system operating
experience.. .Vienna, Nov. 28-Dec. 2, 1966.
xi. 786p. 1967. The Agency, Vienna. $16.
International Metal Finishing Conference (7th), Hannover,
1968. 1968. Deutsche Messe- und Ausstellungs,
Hannover.
Includes the 36th meeting of the European Federation for
corrosion.
Korrosion 18: Korrosion durch heisse Gase und Ver-
104

ennungsprodukte; bericht uber die Korrosionstagung
1965 in Frankfurt/Main vom 31 Marz bis 2
April. 213p. 1966. Verlag Chemie, Weinheim/Bergstr.
33 DM.
Corrosion by means of hot gases and combustion products.
Oetcren, K. A. van. Konstruktion und Korrosionsschutz.
232p. 1967. Vincentz. Hannover. 48 DM.
Construction and corrosion protection.
Piltz, H. H. Werkstoffzerstorung durch Kavitation.
viii, 92p. 1966. VDI-Verlag, Dusseldorf.
Cavitation damage of materials. Literature review.
Itabald, Erich. Corrosion guide. Ed. 2, rev. 629p.
1968. Elsevier, New York. $60.
Rogers, Thomas Howard. Marine corrosion, xii, 307p
196S. G. Ncwnes, London. 63/-.
Sayano. Reizo Ray. Electrochemical behavior of nic
iron and nickel-iron alloys in sulfuric acids. Parts I
and 2. 200p. 1967. UM: Order no. 67-7399. $9 (fs).
$3 (mf).
Dissertation. University of California. Los Angeles.
Science Museum, London. Some references on marine
corrosion of metals 1960-1965. 7p. 1966. Science
Museum. London. (Science Library bibliographical
series no. 791).
Spatig.. D. O.. and W. H. Ailor. Computerized long
term corrosion data. 21p. n.d. American Society for
Testing and Materials. Philadelphia. Pa. (Paper no.
21).
Springe, G. Untersuchungen uber die Ursaclien der
SjHtnnungskorrosionsempfindlichkeit von Nichtrostenden
Stahlcn. 106p. 1966. Technische Hochschule,
Stuttgart.
105

Dissertation. Investigations on the causes of stress corrosion
sensitivity of stainless steels.
Stewart, D., and D. S. Tulloch. Principles of corrosion
and protection. HOp. 1968. Macmillan, London.
21/-. ($2.20).
Thomas, Harry E., and Harry N. Alderson. Corrosion
rates of mild steel in coastal, industrial, and inland
areas of Northern California. 14p. n.d. American
Society for Testing and Materials, Philadelphia, Pa.
(Paper no. 32).
Tomashov, Nikon Danilovich, and G. P. Chernova.
Passivity and protection of metals against corrosion.
20Sp. 1967. Plenum, New York. $14.
Translated from the Russian.
Government Publications
Advisory Group for Aerospace Research and Development,
Paris (France). Stress corrosion cracking in
aircraft structural materials, bv H. G. Cole, ed. 251p.
1967. CFSTI: N68-24397.
Aeronautical Research laboratories, Melbourne (Australia
). Effect of solution composition on aiwdic processes
and corrosion of iron, by K. F. Lorking. 9p.
Mar. 1967. CFSTI: N6S-3185L
Atomic Energy of Canada, Ltd., Chalk River (Ontario).
Some observations of httergranular corrosion
on iron and nickel, b\ P. E. C. Bryant and J. E. Le
Surf. 31p. Apr. 1968. CFSTL AECL-2S00. Dep.
CAN. $1.
Atomies International, Canoga Park (Calif.). Evaluation
of ferritic steel in the secondary sodium system,
by R. L. Cummings. 21p. Oct. 1966. CFSTI:
NAA-SR-Mcmo-11986(rev.).
106

Battelle - Northwest, Richland (Wash.). Corrosion
problems posed by the use of austenitic "chromenickel-iron"
in the nuclear environment, by IL
Coriou and others. 42p. 1967. CFSTI: BNWL-tr-25.
Dep. JCL. $4.60 (fs). $1.46 (mf).
Battelle-Northwest. Pacific Northwest Laboratory,
Richland (Wash.), lidtibttion of stress corrosion
cracking with phosplwte solutions, by Alvin P. Larrick.
22p. Apr. 1968. CFSTI: BNWL-753. Dep.
. Laboratory investigation on controlling cast
iron galvanic corrosion in Columbia River water,
by Alvin P. Larrick. 27p. Apr. 1968. CFSTI: BNWL-
763. Dep.
California Institute of Technology. Jet Propulsion Laboratory,
Pasadena (Calif.). Effects of alkali metal
gettering agents on stainless steel corrosion, by
Wayne Phillips. 32p. Apr. 1968. CFSTI: N68-1980L
Centre d'Etude de 1'Energie Nucleaire, Mol (Belgium).
In-pile corrosion of nuclear materials. Final
report. 73p. (1968). CFSTI: EURAEC-2010. Dep.
Compagnie des Ateliers et Forges de la Loire. Cent
de Recherehes. Paris (France). Study of stress corrosion
and of general corrosion of stainless steels
in dilute solutions of chlorides at 350°C to 360°C
and in steam at 500"C. Evolution of the meclianical
properties and of the structure at these temperatures.
Possibility of making use of protection by surface
chromization. Final report by A. Badart and others.
71p. Oct. 1967. CFSTI: EURAEC-1947 (Pt. 2).
Dep.
107
. Study on the stress corrosion of stainless steels
in chloride solutions, part 1. Final report, by A.

Desestret and G. H. Wagner. 122p. Oct. 1967.
CFSTI: EURAEC-1947 (Pt. 1). Dep.
DuPont de Nemours (E. I.) and Company. Savann
River Laboratory, Aiken (S. C). Analysis of failed
17-4 PH bolts from the HWCTR, by Robert P.
Marshall. 20p. Sept. 1967. CFSTL DP-1102. Dep.
Analysis of 17-4 PH stainless steel bolts from the Heavy
Water Components Test Reactor: failure of bolts in service
due to stress corrosion.
European Atomic Energy Community, Brussels (Belgium).
Influence des traitements de surface sur la
resistance a la corrosion des aciers itw>xydables, by
Ph. Beige. 143p. Apr. 1968. CFSTI: N68-25815.
Effect of surface treatment on the corrosion resistance of
stainless steels. In French with English summaries.
Farnham (Frank C.) Company, Philadelphia (Pa.).
On the role of hydrogen in the process of steel failure
in neutral corrosive media, by V. I. Tkachev and
R. I. Kripyakevich. 8p. 1967. CFSTL N67-40088.
Translated from the Russian.
France. Centre National de la Recherche Scientifique,
Paris (France). (Corrosion of stainless steel). Quarterly
report no. 17, Jan. 1-Mar. 31, 1967, by G. Chaudron.
21p. 1967. CFSTI: EURAEC-1918. Dep.
. (Stress corrosion of stainless steels). Quarterly
report no. 18, April 1-June 30, 1967, by G. Chaudron.
15p. 1967. CFSTL EURAEC-1932. Dep.
General Electric Company. Atomic Power Equipm
Department, San Jose (Calif.). Investigation of intergranular
cracking of nonsensitized austenitic
stainless steels in circulating autoclaves, bv A. E.
Pickett, 36p. June 1967. CFSTL GEAP-5495. Dep.
I OS

General Electric Company. Nuclear Technology Department,
Pleasanton, (Calif.). Effect of cathodically
charged hydrogen on crack generation in type-304
stainless steel, by E. G. Brush. 42p. Mar. 1967.
CFSTI: CEAP-5415; N68-12686.
General Electric Company. Nucleonics Laboratory,
Pleasanton (Calif.). Stainless steel failure investigation
program. Final summary report, by R. N. Duncan.
SOp. Feb. 1968. CFSTI: CEAP-5530. Dep.
General Electric Company. Research and Development
Center, Schenectady (N. Y.). Intergranular
corrosion and electron microscopic studies of attstenitic
stainless steels, by K. T. Aust and others.
24p. 1967. Rept.-67-C-164.°
Hydronautics, Inc., Laurel (Md.). Cavitation damage
in liquid metals (potassium studies). Technical progress
report, Aug. 1-Oct. 31, 1966, by H. S Preiser
and S. L. Rudy. 16p. Nov. 1966. CFSTI: N67-16606.
MSA Research Corporation, Evans City (Pa.). Limited
comparison of the relative merits of 304 versus
316 stainless steel for liquid metal service. Topical
report no. 10, by R. C. Andrews and others. 66p.
Dec. 1967. CFSTL MSAR-67-216. N68-19053. Dep.
Missouri University, Rolla (Mo.). Mechanisms of
metallic corrosion processes and hydrogen embrittlement.
Final report, 1962-1968. by M. E. Straumanis.
26p. Apr. 1968. CFSTL AD-669 006.
National Research Council of Canada, Ottawa (Ontario).
Studies on atmospheric corrosion of steels
related to meteorological factors in Japan. 2. Multiple
correlation of meteorological factors and at-
109

mosplteric pollution substances on corrosion of steel,
by Kazuhiko Oma and others. 14p. 1967. CFSTI:
N68-22528.
Ohio State University Research Foundation, Columbus
(Ohio). Stress corrosion cracking of iron-nickelchromium
alloys, by R. M. Latanision and R. W.
Staehle. 175p. Oct. 1967. CFSTI: COO-1319-61.
Presented at the Conference on Fundamental Aspects of
Stress Corrosion Cracking, At-hens. Ohio, 11-15 Sept. 1967.
Study of tlte mechanism of stress corrosion
cracking in the iron-nickel-chromium alloy system.
Quarterly report, June 17-Sept. 16, 1966, by R. W.
Staehle. 52p. Dec. 1966. CFSTI: COO-1319-5L Dep.
Study of tlte mechanism of stress corrosion
cracking in the iron-nickel-chromium alloy system.
Quarterly report, Sept. 17-Dec. 16, 1966. by R. W.
Staehle. 34p. Jan. 1967. CFSTL COO-1319-53. Dep.
Study of the mechanism of stress corrosion
cracking in the iron-nickel-chromium alloy system.
Quarterly report, Mar. 17-June 16, 1967, by R. W.
Staehle. 57p. July 1967. CFSTL COO-1319-57.
N68-19073. Dep.
Societe d'Etudcs de Recherehes et d'Applications pour
1'Industrie, Brussels (Belgium). Corrosion des aciers
au carbone et des aciers inoxydables dans Teau
sous pression a liaute temperature, by M. Warzee
and others. 44p. Oct. 1967. EUR-338SF.°
Corrosion of carbon steel and stainless steels in pressurized
water at high temperature. In French with summaries in
English.
. Corrosion of carbon steels and stainless steels
in pressurized water at high temperatures. Special
110

eport no. 9. 40p. July 1967. CFSTI: EURAEC-
1896. Dep.
Translated from the French. (EUR-3388F).
-. Corrosion of stainless steel and high nickel
content alloys in high-temperature superheated
steam. Special report no. 8, by M. Warzee and
others. 74p. July 1967. CFSTI: EURAEC-1S95. Dep.
Techtran Corporation, Glen Burnie (Md.J. On the
corrosion resistance of metals in freon, by G. V.
Karpenko and others. 3p. July 1968. CFSTI: N68-
30221.
U. K. National Lending Library for Science and Tec
nology, Boston Spa (England). Corrosion resistance
of nickel-copper-chromium cast iron, by L N. Yukalov
and others. 5p. July 1968. NLL: Transl. 68/159.
Translated from the Russian.
U. S. Air Force Materials Laboratory. Wright-Patterson
Air Force Base (Ohio). Conference on corrosion
of military and aerospace equipment held in Denver,
23-25 May, 1967. 2051p. Nov. 1967. AFML-TR-67-
329.*
U. S. Air Force Systems Command. Foreign Technology
Division. Wright-Patterson Air Force Base
(Ohio). Corrosion of chromium-nickel stainless steel
in lithium, by N. M. Beskorovanynyi and others. 12p.
Sept. 1967. CFSTI: AD-672 704.
Translated from the Russian.
. Relation of the precipitation processes to the
properties of corrosion-resistant steels, by V. Cihal
and O. Vanicek. 17p. Nov. 1967. CFSTI: AD-670
100.
Translated from the Czech.
Ill

U. S. Army Weapons Command. Research Engineering
Division, Rock Island (111.). Effects of pressure and
vibration rates upon fretting damage. Technical report,
by S. Fred Calhoun. 14p. April 1968. CFSTI:
AD-668 658.
. Study of corrosion and porosity of electrodeposited
coatings by hydrogen diffusion technique,
by Russell IL Wolff. 16p. Mar. 196S. CFSTI:
AD-668 657.
U. S. National Aeronautics and Space Administratio
Goddard Space Flight Center, Greenbelt (Md.).
Heat treatment for improved stress-corrosion resistance
of 17-7 ph stainless, by Carl R. Johnson and
John D. Grimsley. lip. July 196S. CFSTI: N68-
29379.
U. S. National Aeronautics and Space Administratio
Langley Research Center, Langley Station (Va.).
Hot salt stress corrosion cracking of sheet materials
for a supersonic transport, by George J. Heimerl
and Dick M. Royster. 19p. (1967). CFSTL N6S-
25324.
U. S. National Aeronautics and Space Administratio
Lewis Research Center, Cleveland (Ohio). Effect
of cover gas pressures on accelerated cavitation
damage in sodium, bv Stanley G. Young and James
R. Johnston. 24p. Nov. 1967. NASA-TN-D-4235.'
. Effect of cover gas pressures on accelerated
cavitation damage, by J. R. Johnston and S. G.
Young. 33p. 1968. CFSTI: N6S-19745.
-. Meclianism and kinetics of corrosion of selected
iron and cobalt alloys in refluxing mercury, by
112

Louis Rosenblum and others. 54p. Apr. 196S.
CFSTI: N68-21654.
U. S. National Bureau of Standards. Corrosion Sect
Washington (D. C). Microbial corrosion. Technical
summary report, 1 May 1967-30 Apr. 1968, by
Warren P. Ivcrson. 48p. Apr. 1968. CFSTL AD-670
.501.
Studies of the effect of microorganisms, particularly sulfate
reducers, on marine corrosion.
U. S. Naval Research Laboratory, Washington (D. C.
ARPA coupling program on stress corrosion cracking.
Quarterly report, by E. P. Dahlberg. 79p. Aug.
1967. CFSTL AD-659 958; N68-11302.
. ARPA coupling program on stress-corrosion
cracking. Quarterly report no. 4, by E. P. Dahlberg.
53p. Nov. 1967. NRL-MR-1834.°
. ARPA coupling program on stress-corrosion
cracking. Quarterly report noJ>, by E. P. Dahlberg.
34p. Feb. 1968. CFSTI: AD-669 487.
•. Growth of oxide films in high temperature
aqueous environment. Part 1. Growth characteristics
of iron oxide films generated in dilute lithium hydroxide
solution at 300°C, by John B. Moore, Jr., and
Robert L. Jones. 21p. June 1968. CFSTL AD-673
401.
Virginia Polytechnic Institute. Department of Meta
and Ceramic Engineering, Blacksburg (Va.) Relationship
of nitrogen content of austenitic stainless
steels to stress corrosion. Quarterly report no. 483-15,
by Thomas B. Cox and John F. Eckel. 22p. Apr.
1968. CFSTI: EURAEC-2026. Dep.
113

. Relationship of nitrogen content of austenitic
stainless steels to stress corrosion. Quarterly report
no. 483-16, by Thomas B. Cox. 17p. July 1968.
CFSTI: TID-24567. Dep.
Westinghouse Research Laboratories, Pittsburgh
(Pa.). Hydrogen accumulation rates within thickwalled
tubes of Fe-Cr and Fe-Cr-Ni alloys during
exposure to high-pH, high-temperature, pressurized
water containing dissolved hydrogen, by F. W.
Pement. 4Ip. June 1967. CFSTI: WERL-1114-3.
Dep.
Wisconsin University. Department of Minerals and
Metals Engineering, Madison (Wis.). Transgranular
stress-corrosion cracking mechanisms in high-purity
austenitic stainless steels, by M. N. Saxena and
R. A. Dodd. 28p. Jan. 1968. CFSTI: AD-671 453.
INSPECTION AND CONTROL
American Society for Testing and Materials. Book of
ASTM standard's. 1968. The Society, Philadelphia.
Pa.
Pt. 1: Steel piping, tubing and fittings, xviii, 660p.
$13.
Pt. 2: Ferrous castings; ferro-alloys, xiv. 474p. $9.
Pt. 3: Steel sheet, strip, bar, rod, wire, chain,
spring; wrought iron; metallic coated products; ferrous
surgical implant materials, xxi, 878p. $15.
Pt. 4: Structural steel; concrete reinforcing steel;
boiler and pressure vessel plate; steel rails, wheels,
and tires; bearing steel; steel forgings; ferrous filler
metal, xxi, 922p. $17.
Pt. 31: Physical and mecltartical testing of metals
— general methods, metallography, nondestructive
114

testing, fatigue, corrosion testing, effect of temperature,
xvii, 1044p. 1968. The Society, Philadelphia.
$19.
Pt. 32: Chemical analysis of metals; sampling and
analysis of metal bearing ores, xvii, 909p. 1968. The
Society, Philadelphia. $18.
. Electron fractography. 230p. 196S. The Society.
Philadelphia, Pa. (Special Technical Publication
no. 436). $11. (Members $8.80).
. Methods for emission spectrochemical analysis.
Ed. 5. 946p. 1968. The Society, Philadelphia,
Pa. $17.25.
Test methods for compression members; a
symposium presented at the 69th annual meeting,
American Society for Testing and Materials, Atlantic
City, June 26-July 1, 1966. 213p. 1967. The
Society, Philadelphia, Pa. $11.50.
Association Francais de Normalisation. Recueil de
normes des produits siderurgiques. xvi, 382p. 1967.
The Association, Paris. 32 F.
A collection of standards on iron products.
British Cast Iron Research Association. Cliemical analysis
for iron foundries: selected methods. 215p.
1967. Allen and Unwin, London. 42s. $6.30.
British Standards Institution. Carbon and low allo
steel containment structures for stationary nuclear
power reactors. 91p. 1967. The Institution, London.
(BS 4208: 1967). 60/-.
. Comparison of British and overseas standards
for steels. Part 1: Chemical compositions of wrought
carbon steels: British standards, American (S.A.E.
115

and AISI) and German (DIN and Werkstoff). Rev.
1. 34p. 1967. The Institution, London. (BS 3179:
Pt. 1: 1967).
. Metlwd for tlte technical assessment of coke
for use in blast furnaces. 30p. 1968. The Institution,
London. (BS 4262: 1968). 12/-.
. Methods for nondestructive testing of steel
forgings.
Pt. 2. Magnetic flaw detection. 16p. 1968. The
Institution, London. (BS 4124: Pt. 2: 1968). 6s.
Pt. 3. Penetrant flaw detection. lOp. 1968. (BS
4124; Pt. 3; 1968). 5s.
. New designation system for carbon steels. 7p.
1968. The Institution, London. (PD 6423: 1968).
4/-.
-. New designation system for stainless steels.
9p. 1967. The Institution, London. (PD 6290). 5s.
New six digit designation system for stainless steels which
will replace the En numbering system in BS 970 and other
steel specifications.
•. Report on reproducibility of methods of chemical
analysis used in the iron and steel industry. 30p.
1967. The Institution. London. (BS 4237: 1967).
10/-.
-. Round steel wire for ropes. 1968. The Institution.
London. (BS 2763: 1968). 8s.
Sjtecifioation for bending dimensions and
scheduling of bars for the reinforcement of concrete.
21p. 1967. The Institution, London. (BS 1478:
1967). 8s.
-. Specification for ferrous pipes and piping installations
for and in connection with land boilers.
116

Rev. 3. 36p. 1967. The Institution, London. (BS 806:
1967). 25/-.
•. Specification for fusion welded pressure vessels
for use in the cltemical, petroleum and allied
industries. Pt. 2: Austenitic stainless steel 200p.
1968. The Institution. London. (BS 1515: Pt. 2:
196S). 100s.
. Specification for hot-dip galvanized plain
steel sheet and coil. lip. 1967. The Institution,
London. (BS 2989: 1967). 6s.
•. Specification for steel castings for general
engineering purposes. Rev. 1. 65p. 1967. The Institution,
London. (BS 3100: 1967). 25/-.
-. Specification for steel plate, sheet and strip.
Pt. 4: Stainless and heat resisting plate, sheet and
strip. 61p. 1967. The Institution, London. (BS 1449:
Pt. 4: 1967). 20s.
-. Specification for surface finish of blast-cleaned
steel for painting. Metric units. 13p. 1967. The Institution,
London. (BS 4232: 1967). 6s.
-. Specification for steel butt-welding pipe fittings
for the petroleum industry.
Pt. 3. Wrought carbon and ferritic alloy steel fittings.
17p. 1968. The Institution. London. (BS 1640:
Pt. 3: 1968). 15s.
Pt. 4. Wrought and cast austenitic chromiumnickel
steel fittings. 16p. 1968. The Institution, London.
(BS 1640: Pt. 4: 1968). 15s.
-. Steels for fired and unfired pressure vessels.
Sections and bars. 1968. The Institution, London,
(BS: 1502: 1968). 20s.
117

. Weldable structural steels. 1968. The Institution,
London. (BS 4360: 1968). 15s.
British Steel Castings Research Association. Recom
mended procedures for the radiographic flaw detection
of steel castings. 14p. 1967. The Author,
Sheffield (England). 15s.
Conference on nondestructive examination applied t
process control in the steel industry; papers and discussions
from tlte conference... held at the University
College of Swansea Jan. 3-5, 1967. 194p.
1967. Iron and Steel Institute. London. (Publication
103). 60/-. $7.20.
Glen, J., and R. F. Johnson. Some aspects concerni
the extrapolation of rupture data. 9p. 1967. British
Iron and Steel Research Association, London.
(MC/Q/152/67).
Haus der Teclmik. Warmetechniscltes Messwesen.
Teil 1. Temperatur und Druck. 55p. 1967. Vulkan-
Verlag, Essen. (Nortragsveroffentlichungen, v. 114).
12.80 DM.
Pyrometric measuring technique, v.l: temperature and
pressure. Seminar held October 4-17. 1966.
. Zerstorungsfreie Prufung dicker Werkstucke
und Schweissnahte. Ultraschall, Betatron, Linearbeschleuniger
und Isotope; Vortragsreihe vom 23
Januar 1967. 3Sp. 1967. Vulkan-Verlag. Essen. (Vortragsverbffentlichungen
Haus der Technik. no. 125).
12 DM.
Nondestructive testing of thick worlcpieces and joints.
Ultrasonics, betatron, linear accelerator and isotope.
Hayer, M., and others. Equipment for sampling and
analyzing metallurgical furnace atmospheres. 17p.
118

1967. Brutcher. Altadena, Calif. (HB-7000). $18.50.
Translated from the Czech.
Institution of Mechanical Engineers. Machines for
materials and environmental testing, x, 471p. 1966.
The Institution, London. (Proceedings, v.180, pt.
3A). £7.
International Atomic Energy Agency. Recurring inspection
of nuclear-reactor steel pressure vessels;
report of a panel., .held in Pilsen, Czechoslovak
Socialist Republic, 3-7 October 1966. vi, 239p.
196S. The Agency, Vienna. (Technical report series
no. 81). HMSO. 42s. ($5.).
Iron and Steel Institute. Automatic cleanness asse
ment of steel. 80p. 1968. The Institute, LonHc:,
(Publication no. 112). £4.
Kenny, P., and J. D. Campbell. Fracture toughness—
an examination of the concept in predicting the
failure of materials. 46p. 1968. Pergamon, New
York. (Progress in materials science no. 13). 21s.
(ca.$3.).
Lister, E., and R. P. Harvey. Importance of accurate
testing for determining standard high temperature
properties of steels. 13p. 1967. British Iron and
Steel Research Association, London. (MG/Q/153/
67).
McGomiagle. Warren J. Essais rum destructifs. Metaux
et materiaux divers. 550p. 1967. Eyrollcs, Paris.
123.30 Fr. fr.
Non-destructive testing. Metals and miscellaneous materials.
McCowan, N. Non-destructive testing of forgings.
119

48p. (1967). Drop Forging Research Assn., Sheffield,
England. 3. 7s. 6d.
Maenning, Wolfgang-Werner. Untersuchungen zur
Planting und Auswertung von Dauerschwingversuchen
und Stahl in den Beretchen der Zeitund der
Dauerfestigkeit. ISSp. 1967. VDI-Verlag, Dusseldorf.
(Fortschritt-Berichte VDI-Zeitshrift. Reihe 5.
Crund-und Wcrkstoffe Nr. 5). 44.25 DM.
Research on the design and evaluation of fatigue tests on
steel in the fatigue limit zone.
May. M. J., and E. F. Walker. A linear displacement
gauge for use in fracture toughness testing. 5p.
1967. British Iron and Steel Research Association,
London. (MG/E/308/67).
National Conference on Instrumentation in the Iron
and Steel Industry (18th), 1968. 133p. 1968. Instrument
Society of America. Pittsburgh, Pa. $9.
Rose. B. IL. and IL G. Thurston. Confidence in proof
stress properties. 1967. British Iron and Steel Research
Association, London. (MG/Q/151/67).
Schack, K. Berechnung von Warnwaustauschern unter
besonderer Berucksichtigung der Verwendung
von Rechenautomatcn. 1967. Verlag Stahleisen.
Dusseldorf. 27.40 DM.
Calculation of heat exchangers with particular consideration
to the use of computers.
Schall, William E. Non-destructive testing. 210p. 1968.
Machinery Publishing Co., Brighton. England. 42s.
Spauszus, Sigmar. Methoden der chemischen Stahlund
Eisenanalyse. 252p. 1967. Deutscher Verlag fiir
Grundstoffindustrie, Leipzig. (Analvtische Berichte
fiir die metallurgische Praxis, v.l). 20.20 DM.
Methods of chemical analysis of iron and steel.
120

Springmann, Klaus. Die Messung der Oberflachenrauhett
mit Tastschnittgeraten. Untersuchungen am
Beispiel der Stabstahloberflachcn. 175p. 1967. Technische
Hochschule, Hannover.
Dissertation. Measurement of surface roughness with a
profile caliper. Sample studies on steel rod surfaces.
Steel Castings Research and Trade Association, Atlas
of some steel castings flaws as sltown by non-destructive
testing. 36p. 1968. The Association, Sheffield,
England. 25s.
Verein Deutscher Eisenhuttenleute. Die analytische
Chemie in der erzeugenden und verarbeitenden Huttenindustrie;
Vortrage einer vom Verein Deutscher
Eisenhuttenleute zusammen mit dem Haus der
Technik, Essen. 391p. 1968. Verlag Stahleisen. Diisseldorf.
59 DM.
Analytical chemistry in the metallurgical production and
fabricating industry.
Walker, E. F., and M. J. May. Compliance functions
for various types of test specimen geometry. 15p.
1967. British Iron and Steel Research Association,
London. (MG/E/307/67).
Welding Institute. Recommendations for ultrasonic
testing of butt welds. (1968?). Krautkramer Ultrasonics.
Inc., Stratford, Conn. $2.
Government Publications
Acieries Reunies de Burbach-Eich-Dudelange S. A.,
Luxembourg. Applications des isotopes radioactifs
dans la fonderie. Final report, by H. Hencks and
others. 28p. Nov. 1967. EUR-3645f.° N68-17126.
Dep.
The use of radioisotopes in the foundry.
121

Aerojet-Genera I Corporation, Sacramento (Calif.).
Stress-wave characteristics of fracture instability in
constructional alloys, by C. E. Hartbower and
others. 66p. July 1968. CFSTI: AD-674 881.
Battelle-Northwest, Pacific Northwest Laboratory,
Richland (Wash.). Acoustic emission in metals as a
NDT tool, by Philip II. Hutton. 15p. Sept. 1967.
CFSTI: BNWL-SA-1262. Dep.
Acoustic emission as a nondestructive testing and metallurgy
research tool.
. Ultrasonic method for nondestructively detecting
radiation induced embrittlement in pressure
vessel steels, by David O. Hunter. 24p. Oct. 1967.
CFSTI: BNWL-SA-1467. Dep.
Brown University. Metals Research Laboratory, Providence
(R. I.j. Hydrogen in alplta iron determined
via ultrasonic Snoek effect and related measurements.
Final technical report, Jan. 1-Dec. 31, 1967,
by Arthur E. Lord and others. 41p. Jan. 1968.
CFSTI: AD-665 OIL
California University. Lawrence Radiation Laboratory,
Livermore (Calif.). Small-diameter tube evaluation
with eddy currents and ultrasonics, by H. E. Peck
and B. J. McKinley. 8p. Sept. 1967. CFSTI: UCRL-
70632. Dep.
Non-destructive evaluation of 1/16 and 1/8 inch o.d.
stainless steel tubing.
Ghent Rijksuniversiteit (Belgium). Determination of
oxygen in metals by 14-MeV neutron activation analysis,
by J. Hoste and others. 72p. June 1967.
EUR-3565e. Dep.
An automated oxygen analysis system for steel and other
metals.
122

Italy. Comitato Nazionale per l'Energia Nucleare,
Rome (Italy). Determination of uMn and iron in
long irradiated steel samples. Application of a lithium-drifted
germanium detector, by A. Moauro.
16p. 1967. CFSTI: N68-11852; RT/CHI(67) 16. $3.
Dep.
Laboratorio de Acustica e Sonica, Sao Paulo (Brazil).
Inspecao ultra-sonica de chapas de aco de alta
qualidade, by L. X. Nepomuceno and others. 23p.
Sept. 1966. TN-6608.263.0
Ultrasonic inspection of high quality steel sheets and
plates. Summary in English.
. Inspecao ultra-sonica de cltapas de aco de
alta qualidade tipo ASTM A-204 GR B, by L. X.
Nepomuceno and others. lOp. Oct. 1966. TN-6610.
271.'
Ultrasonic inspection of special quality steel plates type
ASTM A-204 GR B. Summary in English.
. Inspecao ultra-sonica de cilindros de aco forjado.
by L. X. Nepomuceno and M. F. Barbosa. 19p.
Mar. 1967. TR-6703.285.*
Inspection of forged steel cylinders. Summary in English.
-. Inspecao ultrasonica de mancais para verificacao
da aderencia metal-base de aco, by L. X. Nepomuceno
and M. F. Barbosa. 8p. July 1967. TN-
6707.292.°
Ultrasonic inspection for evaluating bonding in large
metallic bearings. Has English summary.
Mithras, Inc., Cambridge (Mass.). Studies of stress
corrosion cracking by tlte Mossbauer effect. Final
technical report, Feb. 1-Jul. 31, 1967, by J. H. Terrell
and others. 33p. July 1967. CFSTI: AD-660 038.
Southwest Research Institute, San Antonio (Texas).
Nondestructive evaluation of metal fatigue. Scien-
123

tific report, 1967-68, by Felix N. Kusenberger and
others. 75p. Apr. 1968. CFSTI: AD-669 926.
U. S. Army Engineer Waterways Experiment Station,
Vicksburg (Mass.). Rapid tensile tests of six intermediate-grade
steel reinforcing bars, by James T.
Ballard and James R. Hossley. 25p. Sept. 1967. AD-
659 263. (Miscellaneous paper no. 1-837).°
U. S. Joint Publications Research Service, Washing
(D. C.). Requirements for ship steel imposed by
Register of Shipping of USSR, by I. P. Boyarintsev.
12p. Feb. 1968. CFSTL JPRS-44461.
Translated from the Russian.
. Steel welding tests and standards, USSR.
9p. June 1968. CFSTI: JPRS-45704.
Translated from the Russian.
U. S. National Aeronautics and Space Administration,
Washington (D. C). Influence of initial loading of
differing degree and differing frequency on the
fatigue strength of drilled flat bars of steel ST 37.
Part B: Multistage and service strength tests, by E.
Gassner and W. Shuetz. 17p. Dec. 1967. CFSTI:
N68-17047.
Translated from the German.
U. S. National Aeronautics and Space Administration.
Lewis Research Center, Cleveland (Ohio). Cavitation
damage of stainless steel, nickel and an aluminum
alloy in water for ASTM round robin tests,
by Stanley G. Young. 20p. Oct. 1968. CFSTI:
N68-36076.
. Plane strain fracture toughness tests on twoinch-thick
nwraging steel plate at various strength
levels, by J. E. Srawley. 25p. 1968. CFSTL N68-
29972.
124

. Ultrasonic detection and measurement of fatigue
cracks in notched specimens, by Stanley J.
Klima and John C. Freche. 28p. 1968. CFSTI:
NASA-TN-D-4782.
U. S. Naval Research Laboratory, Washington, D. C.
Mechanical aspects of the dynamic tear test specimen.
Memorandum report, by G. E. Nash and E. A.
Lange. 58p. Sept. 1967. CFSTL AD-663 272.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). Heavy-section steel technology program.
Semiannual progress report for period ending Aug.
31, 1967. 85p. Jan. 1968. CFSTI: ORNL-4176. Dep.
U. S. Public Roads Bureau. Transportation Department,
Washington (D. C). Ultrasonic testing inspection
for butt welds in highway 6- railway
bridges. 54p. 1968. GPO. $0.40. Dep.
PRODUCTS AND PARTS
Cold Rolled Steel Strip Association. Cold rolled steel
strip; handbook supplement, buyers guide 1967.
72p. 1967. Newman Neame. London.
Cross, Siegfried. Calculation and design of metal
springs, x, 222p. 1966. Chapman and Hall, London.
£2 10s.
Haus der Technik. Rohrleitungstechnik. Korreferate.
Symposium vom 13 und 14 Oktober 1966 im Haus
der Technik. Essen. 71p. 1967. Vulkan-Verlag, Essen.
18.60 DM.
Pipeline engineering. Selected lectures.
Mang, F. Baustatische Untersuchung der auflagerrinse
Stahlerner Druckrohrleitungen. 140p. 1965.
Technische Hochschule, Karlsruhe.
125

Dissertation. An investigation by structural statistics of
the support rings of steel pressure pipelines.
Miles, R. C. Sound control in design through tlte use
of steel laminates. 13p. 1967. American Society for
Metals, Metals Park, Ohio. (Technical report no.
C7-22.1).
Nachschlagewerk Stahlschlussel. Ed. 8. 295p. 1968.
Verlag Stahlschlussel Wegst KG, Marback/Neckar
(West Germany).
Steel reference book. A compilation of tables giving specifications
for thousands of brands of steel produced in Germany
and other countries. Text in German and English with
a seven language glossary.
National Research Council. Building Research Advisory
Board. Federal agency practices on use of piping,
ix, 99p. 1967. The Author, Washington, D. C.
(Survey or practice report no. 7; NRC publication
no. 1572). $5.
Schwaigerer, S. Rohrleitungen. 709p. 1967. Springer-
Verlag, Berlin. 142 DM. $35.
Pipeline.
Schwartzkopff, K. Eine Untersuchung uber den Mechanismus
von Rollreibung und-Verschleiss an-Niedrig
Belasteten Stalilkugeln. 48p. 1965. Technische
Universitat. Berlin.
Dissertation. An investigation of the mechanism of roll
friction and wear in low-stressed steel balls.
Shapiro, Leo. High strength steels in deep submersibles.
14p. 1967. American Society for Metals,
Metals Park. Ohio. (Technical report no. C7-1.4).
Verein Deutscher Eisenhuttenleute. Stahl-Eisen-Liste.
Ed. 2. 436p. 1967. Verlag Stahleisen, Dusseldorf.
68 DM.
126

Iron and steel catalog. A classified list of steels and steel
products manufactured in the Federal Republic of Germany.
Welded Steel Tube Institute. Handbook of welded
steel tubing. 186p. The Institute, Cleveland, Ohio.
$10.
Government Publicotions
Atomics International, Canoga Park (Calif.) and
Combustion Engineering, Inc., Nuclear Division,
Windsor (Conn.). Heavy water organic cooled reactor.
Development of a stainless steel-aluminum
transition joint for high-temperature service, by
W. R. Jackson. 32p. Sept. 1967. CFSTI: AI-CE-72.
Dep.
Frankford Arsenal. Pitman-Dunn Research Labora
tories, Philadelphia (Pa.). Evaluation of high per
formance rocket motors using subscale precracked
cases, by Carl M. Carman. 31p. Aug. 1967. CFSTI
AD-660 335; N68-12802.
Testing of stainless steel and maraging steel rocket cases
Value Engineering Company, Alexandria (Va.). Met
allurgical evaluation of aircraft exhaust system com
ponents which failed during ground test program.
Final report, by J. R. Kaye and others. 72p. Apr.
1968. CFSTI: AD-672 034.
DESIGN AND CONSTRUCTION
American Institute of Steel Construction. Plastic design
of braced multuitory steel frames. The Institute,
New York $6.
Association Internationale des Ponts et Charpentes.
Memoires. 637p. 1966. The Association, Zurich
(Publications v.26). 100 Swiss fr.
127

Publications of the International Association for Bridge
and Structural Engineering, v.26.
Blanchard. Guy. Protection des cliarpentes metalliques
centre lincendie. 64p. 1967. Centre Technique Industriel
de la Construction Metallique, Paris.
Fire protection of steel structural frameworks.
Bresler, Boris, and others. Design of steel structures.
Ed. 2. xvii, 830p. cl96S. Wiley, New York. $16.50.
British Constructional Steelwork Association. Conference
on structural steelwork, London, September
26-28, 1966. 248p. 1967. The Association, London.
63s.
. Safe loads and moments for stanchions to B. S.
449, by R. Gray. 39p. 1967. The Association, London.
(Publication no. 30). 15/-.
Chambre Suisse de la Construction Metallique. Tables
pour la construction metallique. Ed. 4. 76p. 1967.
The Author, Zurich.
Tables for steelwork design. (Text in German and
French).
Conference on Structural Steelwork. Proceedings.
248p. 1966. Sir Joseph Causton & Sons, London.
£3.3.0
Council for Codes of Practice. Committee for Building
and Committee for Civil Engineering. Composite
construction in structural steel and concrete, pt. 2:
beams for bridges. 32p. 1967. British Standards Institution.
I.ondon. (CP 117: Pt. 2: 1967). 10/-.
Dibley, J. E., and J. S. Sowter. Tests on laterally unsupported
beams of steel to BS 15. 14p. 1967. British
Iron and Steel Research Association, London.
(PE/E/31/67).
128

Galambos, Theodore V. Structural members and
frames. 373p. 1968. Prentice-Hall, Englewood Cliffs,
N. J. $16.
Juvinall, Robert C. Engitwcring considerations of
stress, strain and strength. 5S0p. 1967. McGraw-
Hill, New York. $15.
McGuire, William. Steel structures. 1112p. 1968. P
tice-Hall. Englewood Cliffs, N. J. $24.
Robb, Ian. More steel frame design examples. 158p.
1968. Macmillan, London. 35/-.
Sharp, II. J., ed. Engineering materials; selectio
value analysis. 428p. 1966. American Elsevier, New
York. $16.
Simha, D. A., and G. Fonder. Dimensionnement optimum
de portigues en acier. 38p. 1967. Centre de
Recherehes Scientifiques et Techniques de l'lndustrie
des Fabrications Metalliques. Brussels.
Optimum design of steel portal frames.
Symposium on the Behavior of Structural Steel in
Fire, Boreham Wood, 1967; proceedings of the symposium
held at the Fire Research Station, Boreltam
Wood (Herts.) on 24th January 1967. vi, 135p. 1968.
(Joint Fire Research Organization. Symposia no. 2).
H.M.S.O.. London. 60/-.
Zbirohowski-Koscia. K. Thin walled beams, xi. 100p
cT967. Crosby Lockwood. London. 35s.
Government Publications
U. S. Air Force Systems Command. Foreign Technology
Division. Wright Patterson Air Force Base
(Ohio). Steel structural designers handbook, by
129

N. P. Melnikov. 575p. July 1967. CFSTI: AD-664
539.
Translation of the Russian monograph.
U. S. Naval Research Laboratory, Washington
(D. C). Advances in fracture toughness cltaracterization
procedures and in quantitative interpretations
to fracture-safe' design for structural steels. Special
summary and interpretative report, by William S.
Pellini. 88p. Apr. 1968. CFSTL AD-669 690.
U. S. Oak Ridge National Laboratory, Oak Ridge
(Tenn.). Technology of steel pressure vessels for
water-cooled nuclear reactors, by G. D. Whitman
and others. 675p. Dec. 1967. CFSTI: ORNL-NSIC-
21. Dep.
A review of current practice in design, analysis, materials.
fabrication, inspection and testing.
130

•BBMsBaaaaB*S^BSBBBBaaanEB*l