chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLOWLINE ECHOPOD<br />
The Flowline EchoPod is an innovative level sensor that replaces fl oats, conductance and<br />
pressure sensors that fail due to dirty, sticking and scaling media in small tanks 49.2”<br />
(1.25m) or less. EchoPod, a general purpose sensor, combines non-contact switch, controller<br />
and transmitter capabilities in one multi-function sensor. Combining 4 relays, 4-20<br />
mA output and pump/valve control in one small sensor allows EchoPod to be your total<br />
solution. Maintenance free, EchoPod reduces tank system hardware through simplicity<br />
and consolidation. Additionally, EchoPod is well suited for corrosive and dirty applications<br />
with its non-metallic housing and transducer. EchoPod provides a total solution for<br />
fl uid handling and automation. The time to “Think Small and Win Big” is now, and it’s<br />
with EchoPod. It incorporates WebCal, an innovative PC user inter-face that provides<br />
fast and accurate confi guration of your EchoPod. The EchoPod enclosure is made of<br />
fl ame retardant Polycarbonate (PC/ABS FR). The transducer (black bottom) is made of<br />
Polyvinylidene Fluoride (PVDF) for maximum corrosion resistance. it is available with<br />
metric or imperial thread and with or without computer connection FOB.<br />
FLOWLINE ECHOSAFE<br />
The Flowline EchoSafe is an ultrasonic level transmitter designed for hazardous applications,<br />
where an agency certifi ed sensor is needed. A 2-wire (loop-powered) ultrasonic<br />
level transmitter that provides non-contact level measurement up to 10 m (32.8’) in<br />
hazardous (classifi ed) bulk storage, day tank, waste treatment and sump applications,<br />
and is well suited for challenging corrosive, slurry or waste media. EchoSafe utilizes<br />
Flowline’s patented digital surface processing (DSP) technology, enabling surface imaging<br />
that provides adaptive technology for obstructions that may enter the beam column.<br />
This allows for greater dependability and accuracy in installations where obstructions<br />
below the sensor can’t be avoided. It features accuracy of +/- 0.2% span in air, measurement<br />
range from 8” to 32.8’ , narrow beam diameter and minimum dead band. It is ideal<br />
for municipal water treatment, fuel oil storage, petrochemical refi nery, industrial waste<br />
treatment, bio-diesel process monitoring, chemical storage tanks, pharmaceutical and<br />
laboratory waste storage.<br />
FLOWLINE ECHOTOUCH<br />
The Flowline EchoTouch is offered in CSA and Cenelec approved intrinsically safe or<br />
general purpose confi gurations. The two-wire ultrasonic transmitter provides noncontact<br />
level measurement up to 18’ or 5.4m, and is ideally suited for challenging corrosive,<br />
slurry or waste liquids. The transmitter is typically selected for atmospheric bulk storage,<br />
day tank and waste sump applications located within a classifi ed hazardous area. Media<br />
examples include diesel fuel and hydrochloric acid. The transmitter is calibrated in less<br />
than a minute using the LCD display, 4-button interface and intuitive calibration menu.<br />
All user set points are held in non-volatile memory. In the event of acoustic signal loss,<br />
the transmitter will hold the current output at the user designated safe state. It is available<br />
in either metric or imperial mount thread.<br />
5-15<br />
5