chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

5
5-18
HANNA HI504 PH/ORP CONTROLLER
HI 504 introduces an innovative means of pH and ORP control which enhances the
entire line of process controllers. This technology supplies the means to control, from
any distance and in real time, one or more installations, allowing the user to optimize
operations such as maintenance cycles. RS485 and Windows® compatible software
provides for two-way communication where the user can control the complete regulation
process from the convenience of a PC or through his cellular phone with SMS. A battery
of self-diagnostic and troubleshooting functions, such as our innovative “sensor check”
feature, guarantees reliability. Any type of industrial probe with a BNC connector can be
used with this controller. The exclusive fail-safe alarm system protects against problems
caused by power supply failure or signal interruption. HI 504 Process Controller Series
complies with the production standards required by the Underwriters Laboratories (UL).
It is available with single setpoint, dual setpoint, single setpoint & advanced cleaning, or
dual setpoint & advanced cleaning. It is available with single or dual analog output. It is
available with 115VAC, 230 VAC and 100VAC power supply.
HANNA HI700 EC CONTROLLER
The HI 700 series of regulators offer state-of-the-art specifi cations for your process control.
They can be confi gured for ON/OFF, Proportional, PI or PID control. They can be
customized to best fi t your application. A menu-driven display aids the user throughout
the operations with running messages and clear prompts. All relevant parameters can be
simply adjusted and will remain memorized until overwritten. Bright LED’s show the
current status even from a distance. With self-diagnostic features and extractable terminals,
installation and maintenance are rapid and simple. Password protection guarantees
that the calibration and predetermined parameters cannot be altered unnecessarily. The
controllers can operate with 4-ring probe or 4-20 mA signal. They accept probes with or
without a built-in Pt100 temperature sensor. HI 710 monitors and controls both conductivity
and TDS. It is available with 115VAC or 230 VAC power supply.
HANNA PH, ORP, FREE/TOTAL CHLORINE ANALYSER
The PCA 310 series of analyzers check chlorine levels in applications such as pools and
spas, drinking water and infl uent and effl uent discharge of water to ensure public safety,
prevent waste and protect the environment by reducing over dosage. Features include
alarms that can be set for chlorine control, parameters that can be sent through SMS,
large graphical display with backlight, user-friendly interface, and it can store up to 3500
pieces of data, that can be displayed or downloaded to a PC. PCA 320 also measures pH
and temperature. PCA330 also measures pH, temperature and ORP.