chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Notes:<br />
WEBSTER C5, C7, C8 AND C10 CENTRIFUGAL PUMPS<br />
APPLICATIONS<br />
• Pumping for aeration, agitation, fi ltration, recirculation,<br />
spraying, transfer in the following industries:<br />
• Plating<br />
• Electronics<br />
• Photo processing<br />
• Pollution control<br />
• Chemical processing<br />
• Water treatment<br />
• 575 Volt motors available upon request.<br />
• Standard impeller diameters are C5(2.7”), C7(3.7”), C8(4.2”), 3hp C10(5.2”),<br />
&5hp C10(5.7).<br />
• For variations on impellers, contact customer service.<br />
• Carbon/ceramic seals are standard. special seals( PTFE/ceramic, PTFE/pink<br />
ceramic,<br />
PTFE/carpenter 20) are available upon request.<br />
• Water fl ushed seals available upon request.<br />
• FPM is standard elastomer. EPDM available upon request.<br />
The C5, C7 and C8 Series pumps are designed specifi cally for continuous<br />
chemical duty service. They are rugged, precision molded, and feature dynamically<br />
balanced, enclosed impellers. Units are available in CPVC (Corzan®),<br />
fi berglass reinforced Polypropylene, and PVDF (Solef® ) with ratings<br />
of 1/3, 1, 1-1/2, 3 and 5 horsepower. The standard mechanical seal is a John<br />
Crane Type 21 single seal, carbon/ceramic. Other seal materials are available<br />
depending on the process fl uid. And, water-wash seals are available for especially<br />
aggressive or “crystallizing” liquids. Pump models are also available<br />
with a rugged cast iron bearing frame for belt-drive or other coupled drivers.<br />
Features<br />
• No metal in contact with fl uid being pumped<br />
• Viton seal elastomers and o-rings standard, EPDM available<br />
300 series stainless steel shaft with belt-drive or direct<br />
coupled drivers<br />
• Dynamically balanced, enclosed impellers<br />
• Totally enclosed motors<br />
• Available with bearing frame for belt drive or direct coupled<br />
driver<br />
(FNPT) (MNPT)<br />
Item Number Material H.P. Volts Phase Suction Discharge<br />
1C5GX0200 CPVC 1/3 115/230 1 3/4" 1/2"<br />
1C5HX0200 CPVC 1/3 208-230/575 3 3/4" 1/2"<br />
1C7GX0400 CPVC 1 115/230 1 1" 3/4"<br />
1C7HX0400 CPVC 1 208-230/575 3 r 3/4"<br />
1C8GX0600 CPVC 1 1/2 115/230 1 1 1/4" 1"<br />
1C8HX0600 CPVC 1 1/2 208-230/575 3 1 1/4" 1"<br />
1C5GX0203 FRPP 1/3 115/230 1 3/4" 1/2"<br />
1C5HX0203 FRPP 1/3 208-230/575 3 3/4" 1/2"<br />
1C7GX0403 FRPP 1 115/230 1 1" 3/4"<br />
1C7HX0403 FRPP 1 208-230/575 3 1" 3/4"<br />
1C8GX0603 FRPP 1 1/2 115/230 1 1 1/4" 1"<br />
1C8HX0603 FRPP 1 1/2 208-230/575 3 1 1/4 1"<br />
1C1HX0500 FRPP 3 208-230/575 3 1 1/2 1"<br />
1C4HX0700 FRPP 5 208-230/575 3 1 1/2 1"<br />
1C5GX0209 PVDF 1/3 115/230 1 3/4" 1/2"<br />
1C5HX0209 PVDF 1/3 208-230/575 3 3/4" 1/2"<br />
1C7GX0409 PVDF 1 115/230 1 1" 3/4"<br />
1 C7HX0409 PVDF 1 208-230/575 3 1" 3/4"<br />
1C8GX0609 PVDF 1 1/2 115/230 1 1 1/4" 1"<br />
1C8HX0609 PVDF 1 1/2 208-230/575 3 1 1/4" 1"<br />
6-3<br />
6