chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6<br />
6-8<br />
APPLICATIONS<br />
• Transferring<br />
• Filtering<br />
• Recirculation<br />
• Mixing<br />
• Replenishment<br />
APPLICATIONS<br />
• Plating Solution Filtration<br />
• Circuit Etching<br />
• Recirculation Pumps/ Water Treatment<br />
• Fume Scrubbing/ Pollution Control<br />
PENGUIN MAGNETIC DRIVE PUMP<br />
Penguin magnetic-driven pumps are designed to handle a wide range of chemicals without<br />
diffi culty. Constructed of polypropylene, Kynar, or stainless steel, Series M pumps have<br />
an upper working temperature of 190/220/250°F, respectively, and thus can handle highly<br />
corrosive or mild chemicals, acids, or solvents. Series M pumps eliminate the conventional<br />
shaft seal found in most pumps. This means that there is no rotating seal to wear out<br />
and allow the liquid being pumped to leak out. The pumping action may eventually fail,<br />
however, the liquid can never leak out. Series M pumps are easy to install and operate, and<br />
are virtually maintenance-free. Available options include:<br />
Horsepower: 1/15, 1/10, 1/5, 1/3, 1/2, 3/4, 2, 3, 5<br />
Construction Material/ O-Ring: Polypropylene, PVDF/Kynar, 316SS, Hastelloy<br />
Self Primer: Self Priming Pump and 1 HP Motor<br />
Please contact customer service for assistance in sizing your pump.<br />
Features<br />
• Sealless<br />
• No Metal Contact<br />
• Bearing-Free<br />
• Chemical-Resistant<br />
• Leak-Resistant<br />
• Available in 316SS, Kynar, and Hastelloy<br />
PENGUIN HORIZONTAL VOLUTE PUMP<br />
Penguin horizontal volute pumps are designed for larger volume than the Series<br />
HV and are able to handle a wide range of chemicals without diffi culty. Completely<br />
constructed of CPVC where in contact with the solution being pumped, Series HN<br />
pumps have an upper working temperature of 1<strong>80</strong>°F, and thus can handle most corrosive,<br />
slurries, and abrasive solutions. For high temperatures and very corrosive<br />
abrasive solutions, a double mechanical seal and water fl ush are supplied. Available<br />
options include:<br />
Horsepower: 3, 5, 7 1/2<br />
Seal: Single Seal or Double Seal<br />
Seal Material: Ethylene/Propylene Carbon/Ceramic, Viton Carbon/Ceramic, Viton<br />
Silicon Carbide / Silicon Carbide<br />
Please contact customer service for assistance in sizing your pump.<br />
Features<br />
• Corrosion Resistant<br />
• Very High Effi ciency<br />
• True Volute Design with Center Discharge<br />
• No Metal Contact<br />
• High Flow Rates