chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Recommendations

Info

Applications • Chemical • Wastewater treatment • Chlorination • Pulp & Paper Slurries • Printing inks • Oil based fl uids • Gaseous fl uids • Shear sensitive fl uids • Caustics • Chemical Slurries • Food and Beverage FLEX-PRO TM PERISTALTIC PUMPS • Peristaltic pump design does not have valves that can clog requiring maintenance. • Self priming - even against maximum line pressure. • By-pass valves are not required. • Cannot vapour lock or lose prime. • Output volume is not effected by changes in back pressure. • Two pump tubes supplied with each pump. No extra tubing required. • Inputs include: 4-20mA, 0-10VDC, and Pulse inputs for external speed control and 0-30 VDC contact closure remote start/stop. • Operator friendly digital touch pad with menu driven software. • VGA Graphic backlit LCD displays motor speed, input signal values, service and alarm status. • Outputs include: Scalable 4-20mA and pulse, One 10 amp relay and three 30 VDC contact closures assignable to monitor TFD, FVS, motor on, operating mode error. • Two CNC machined squeeze rollers and two alignment rollers for optimum squeeze, unparalleled accuracy, and tube life. • Heavy duty rotor - single piece rotor design means no fl exing and increased accuracy • Pump can handle same maximum PSI in either direction . • Output rates to: 33.3 GPH (126 LPH) @ 125 PSI (8.6 Bar). • No maintenance, brushless variable speed motor. • Specially engineered tubing for long life at high pressures. • Motor reverse feature to increase tube life. • Patented Tube Failure Detection (TFD) system. Senses tube failure by detecting chemical in the pump head. Feed rate Part Numbers GPH LPH ML/Min Max Speed RPM tube type 115V AC 230V AC 220V AC .01 - 1.0 .03 - 3.9 .63 - 63.1 62 Norprene A3V14-SND A3V15-SND A3V16-SND .02 - 2.1 .07 - 7.8 1.32 - 132.5 125 Norprene A3V24-SND A3V25-SND A3V26-SND .04 - 4.0 .15 - 15.0 2.52 - 252.4 62 Norprene A3V14-SNF A3V15-SNF A3V16-SNF .07 - 7.9 .30 - 30.0 4.98 - 498.4 125 Norprene A3V24-SNF A3V25-SNF A3V26-SNF .09 - 9.0 .34 - 34.1 5.67 - 567.8 62 Norprene A3V14-SNH A3V15-SNH A3V16-SNH .12 - 12.7 .48 - 48.0 8.01 - <strong>80</strong>1.2 62 Norprene A3V14-SNJ A3V15-SNJ A3V16-SNJ .16 - 16.6 .63 - 63.0 10.47 - 1047.3 125 Norprene A3V24-SND A3V25-SND A3V26-SND .17 - 17.4 .66 - 66.0 10.97 - 1097.8 125 Norprene A3V24-SNH A3V25-SNH A3V26-SNH .25 - 25.3 .96 - 96.0 15.96 - 1596.2 125 Norprene A3V24-SNJ A3V25-SNJ A3V26-SNJ .33 - 33.3 1.2 - 126.0 21.00 - 2100.9 125 Norprene A3V24-SNK A3V25-SNK A3V26-SNK .02 - 2.4 .09 - 9.0 1.51 - 151.41 62 Tygothane A3V14-SGE A3V15-SGE A3V16-SGE .04 - 4.6 .17 - 17.4 2.90 - 290.2 125 Tygothane A3V24-SGE A3V25-SGE A3V26-SGE .05 - 5.0 .18 - 18.9 3.15 - 315.45 62 Tygothane A3V14-SGG A3V15-SGG A3V16-SGG .10 - 10.1 .38 - 38.4 6.37 - 637.2 125 Tygothane A3V24-SGG A3V25-SGG A3V26-SGG .12 - 12.0 .45 - 45.6 7.57 - 757.1 62 Tygothane A3V14-SGH A3V15-SGH A3V16-SGH .24 - 24.9 .94 - 94.2 15.70 - 1570.9 125 Tygothane A3V24-SGH A3V25-SGH A3V26-SGH 6-27 6
6 Applications • Chemical • Wastewater treatment • Chlorination and Caustics • Pulp & Paper Slurries • Oil based fl uids • Gaseous fl uids • Shear sensitive fl uids • Chemical Slurries • Food and Beverage Selection Process 1. Select Maximum Motor RPM (See Below) 0 = 14 RPM 1 = 30 RPM 2 = 45 RPM 3 = 60 RPM 2. Select Power Supply 0 = 115V60Hz 1 = 220V50Hz 2 = 230V60Hz 8 = 240V50Hz 3. Select Pump Tube Size and Material (see below) 1 = 1/4” OD Tygothane 2 = 3/8” OD Tygothane 3 = 7/16” OD Tygothane 4 = 1/4” OD Norprene 5 = 5/16” OD Viton 6 = 3/8” OD Norprene 7 = 7/16” OD Norprene 4. Select Tubing Connection Type T = Compression tube nuts Q = Push-on quick connect 5. Select Miscellaneous Options if required 6-28 A-100N PERISTALTIC PUMPS • Peristaltic pump design does not have valves that can clog requiring maintenance. • Self priming - even against maximum line pressure. By-pass valves are not required. • Cannot vapour lock or lose prime. • Outputs to 250 ml/min (95.1 GPD). • Output pressures to 100 PSI. • Output volume is not effected by changes in back pressure. • Patented pump tube design installs easily and stays centered on the rollers without manual adjustment. • Two pump tubes supplied with each pump. No extra tubing required. • Easy to use dial knob speed adjustment. • Built-in Tube Failure Detection system (TFD). Senses chemical in the pump head, shuts off the pump and activates an NPN open collector output. • Compatible with Blue-White’s output fl ow verifi cation sensor system. • Durable housing of chemical resistant Valox (PBT) thermoplastic. Specifi cations Max. working pressure: 100 psig (6.9 bar) Max. fl uid temperature:130 °F (54 °C) Max. ambient temperature: 14 to 110 °F/-10 to 43 °C Output adjustment range: 5-100% in 1% increments Duty cycle: Continuous Maximum viscosity: 5,000 Centipoise Maximum suction lift: 30 ft. Water 0 psig Maximum Solids: 50% by volume Enclosure: NEMA type 2, (IP21) Voltage (amp draw): 115VAC/60Hz, 1ph (.513 amp max) 230VAC/60Hz, 1ph (.563 amp max) 220VAC/50Hz, 1ph (.660 amp max) 240VAC/50Hz, 1ph (.585 amp max) Power Cord Plug Type: 115V60Hz = NEMA 5/15 (USA) 230V60Hz = NEMA 6/15 (USA) 220V50Hz = CEE 7/VII (EUROPE) 240V50Hz = CEE 7/VII (U.K) Approximate shipping wt: 12 lb. (5.4 kg) 14 RPM Model 30 RPM Model 45 RPM Model 60 RPM Model Tubing Material GPH GPD psi GPH GPD psi GPH GPD psi GPH GPD psi 1 = 1/4” OD Tygothane 0.24 5.7 65 0.55 13.3 65 0.86 20.5 65 1.06 25.5 65 2 = 3/8” OD Tygothane 0.51 12.2 65 1.19 28.5 65 1.82 43.7 65 2.22 53.2 65 3 = 7/16” OD Tygothane 1.16 27.8 50 2.74 65.8 50 4.14 99.2 50 5.17 124 50 4 = 1/4” OD Norprene 0.1 2.3 100 0.21 4.9 100 0.1 8 100 0.4 9.5 75 5 = 5/16” OD Viton 0.17 4.2 25 0.41 9.9 25 0.62 14.8 25 0.76 18.3 25 6 = 3/8” OD Norprene 0.29 6.8 100 0.67 16 100 1 24 100 1.25 30 75 7 = 7/16” OD Norprene 0.9 21.7 50 2.19 52.5 50 3.17 76.1 50 3.96 95.1 50
Page 1 and 2:
PLASTICS FOR TODAY’S INDUSTRY CHE
Page 3 and 4:
TABLE OF CONTENTS PVC, C, CCPV PVC,
Page 5 and 6:
1 1-2 CHEMKOR SCHEDULE 80 FITTINGS
Page 7 and 8:
1 1-4 CHEMKOR SCHEDULE 80 FITTINGS
Page 9 and 10:
1 1-6 Applications • Swimming Poo
Page 11 and 12:
1 1-8 CHEMKOR SCHEDULE 40 GRAY FITT
Page 13 and 14:
1 1-10 NOMINAL PIPE SIZE CHEMKOR SC
Page 15 and 16:
1 1-12 Part Number Nominal Pipe Siz
Page 17 and 18:
1 1-14 20º BEND 90º SOCKET ELBOW
Page 19 and 20:
1 1-16 CHEMKOR SCHEDULE 80 CPVC FIT
Page 21 and 22:
1 1-18 NOMINAL PIPE SIZE CHEMKOR SC
Page 23 and 24:
1 1-20 Part Number MM Nominal Pipe
Page 25 and 26:
1 1-22 Relative Humidity 60% or Les
Page 27 and 28:
1 1-24 PVC AND CPVC S80 EXPANSION J
Page 29 and 30:
1 1-26 NATURAL POLYPROPYLENE SCHEDU
Page 31 and 32:
1 1-28 Applications • Semi-conduc
Page 33 and 34:
1 1-30 SOCKET TEES 90° SOCKET ELBO
Page 35 and 36:
2 2-2 LXT ® SCHEDULE 80 PIPE Ultra
Page 37 and 38:
2 Notes: • IN HG refers to inches
Page 39 and 40:
2 2-6 Applications • Corrosive wa
Page 41 and 42:
2 2-8 FEATURES • Split pipe and f
Page 43 and 44:
2 Notes: • The data contained her
Page 45 and 46:
2 2-12 IPS Pipe Size Actual OD (IN)
Page 47 and 48:
2 2-14 Applications • Low-grade D
Page 49 and 50:
2 2-16 Applications • Ultra-Pure
Page 51 and 52:
2 2-18 SG 110 SOCKET FUSION MACHINE
Page 53 and 54:
2 2-20 MCELROY 824 FUSION MACHINE
Page 55 and 56:
3 3-2 +GF+ 375 TRUE UNION BALL VALV
Page 57 and 58:
3 3-4 CHEMKOR BUTTERFLY VALVES Chem
Page 59 and 60:
3 3-6 SUPER C COMPACT BALL VALVES T
Page 61 and 62:
3 3-8 CALIBRATED NEEDLE VALVES The
Page 63 and 64:
3 3-10 Notes: • The 4” valve ha
Page 65 and 66:
3 3-12 PRESSURE REGULATORS The pres
Page 67 and 68:
3 3-14 Notes: • Size range 3/8”
Page 69 and 70:
3 3-16 +GF+ PNEUMATIC ACTUATED BALL
Page 71 and 72:
3 3-18 +GF+ ELECTRIC ACTUATED BALL
Page 73 and 74:
3 3-20 +GF+ PNEUMATIC ACTUATED DIAP
Page 75 and 76:
3 3-22 HAYWARD BUS CONTROL SYSTEM S
Page 77 and 78:
3 3-24 HAYWARD EAU ELECTRIC ACTUATO
Page 79 and 80:
4 4-2 SIMONA® PVC TYPE I SHEET TEC
Page 81 and 82:
4 4-4 SIMONA® PVC TYPE II SHEET TE
Page 83 and 84:
4 4-6 SIMONA® CLEAR PVC SHEET TECH
Page 85 and 86:
4 4-8 Application • Semiconductor
Page 87 and 88:
4 4-10 Applications • Food proces
Page 89 and 90:
4 4-12 ULTRA HIGH MOLECULAR WEIGHT
Page 91 and 92:
4 4-14 Applications • Sanitary we
Page 93 and 94:
4 4-16 PVDF Natural Extruded Sheet
Page 95 and 96:
4 4-18 Diameter (Inches) PVC-CAW 15
Page 97 and 98:
4 4-20 Hollow PVC and CPVC O.D. (in
Page 99 and 100:
4 4-22 RESIN CODE DESCRIPTION BASE
Page 101 and 102:
4 4-24 PULTRUDED GRATING DURADEK®
Page 103 and 104:
4 4-26 FIBERGLASS STRUCTURAL SHAPES
Page 105 and 106:
4 4-28 FIBERGLASS STRUCTURAL SHAPES
Page 107 and 108:
4 4-30 SAFRAIL FIBERGLASS LADDERS S
Page 109 and 110:
4 4-32 ZINZER WELDING ACCESSORIES P
Page 111 and 112:
4 4-34 LARAMY ECONOMY COMPRESSOR/TO
Page 113 and 114:
4 4-36 WEGENER AIRTHERM HOT AIR WEL
Page 115 and 116:
4 4-38 FIBERGLASS THREADED ROD AND
Page 117 and 118:
AQUAMETRIX SHARK 120/240 CONTROLLER
Page 119 and 120:
Applications • Municipal Water an
Page 121 and 122:
Applications • Municipal Water an
Page 123 and 124:
IP80 SERIES PADDLE WHEEL FLOW SENSO
Page 125 and 126:
AVFM-II AREA VELOCITY FLOW LEVEL MO
Page 127 and 128: SIGNET 8900 MULTI-PARAMETER CONTROL
Page 129 and 130: SIGNET 2450 PRESSURE SENSOR The 245
Page 131 and 132: FLOWLINE ECHOPOD The Flowline EchoP
Page 133 and 134: Part # Material FC-MT-1 CPVC/POLYPR
Page 135 and 136: Notes: • For the sensor type of p
Page 137 and 138: Part # Pipe Size GPM LPM Flow Direc
Page 139 and 140: F-410N MACHINED ACRYLIC TUBE FLOWME
Page 141 and 142: F-430N MACHINED ACRYLIC TUBE FLOWME
Page 143 and 144: Materials of Construction Meter Bod
Page 145 and 146: Materials of Construction Meter Bod
Page 147 and 148: Materials of Construction Pipe fi t
Page 149 and 150: Specifi cations Max. Working Pressu
Page 151 and 152: UNI-SPRAY NOZZLES Uni-Spray Nozzles
Page 153 and 154: 6 6-2 APPLICATIONS • Pumping for
Page 155 and 156: 6 Features • Leak-proof, seal-les
Page 157 and 158: 6 6-6 WEBSTER IN-TANK FILTRATION SY
Page 159 and 160: 6 6-8 APPLICATIONS • Transferring
Page 161 and 162: 6 6-10 Features • Leak-Resistant
Page 163 and 164: 6 6-12 Features • True Depth Filt
Page 165 and 166: 6 6-14 Features • Recovers 99% of
Page 167 and 168: 6 6-16 PENGUIN HF IN-TANK FILTRATIO
Page 169 and 170: 6 6-18 Options • Flanged connecti
Page 171 and 172: 6 6-20 Features • PPL or PVDF Con
Page 173 and 174: 6 6-22 Options • Stainless steel
Page 175 and 176: 6 Notes: • Other perforations may
Page 177: 6 6-26 MAZZEI INJECTORS Mazzei® In
Page 181 and 182: 6 6-30 C-1500N CHEM-FEED DIAPHRAGM
Page 183 and 184: 6 CENTRIFUGAL PUMPS Ideal type for
Page 185 and 186: 7 Notes: • Tanks must be placed o
Page 187 and 188: 7 Notes: • Tanks must be placed o
Page 189 and 190: 7 7-6 DOUBLE WALL CONTAINMENT TANKS
Page 191 and 192: 7 Notes: • Standard colour is nat
Page 193 and 194: 7 7-10 Chemical resistance (general
Page 195 and 196: 7 7-12 BOLTED FLANGE FITTINGS Bolte
Page 197 and 198: Applications • Swimming Pools •
Page 199 and 200: APPLICATIONS • Food & beverage di
Page 201 and 202: Applications • Food & beverage di
Page 203 and 204: Notes: • Suggested operating temp
Page 205 and 206: Notes: • Dimensions in brackets i
Page 207 and 208: Size (IN) Insert Tee (Insert x Inse
Page 209 and 210: Approx. Length (IN) Max Bundle Diam
Page 211 and 212: Male Connector (Tube x MPT) Part #
Page 213 and 214: Notes: • Available in 20ft length
Page 215 and 216: INSTADUCT® PVC VENTILATION DUCT FI
Page 217 and 218: INSTADUCT® PVC VENTILATION DUCT PI
Page 219 and 220: Branches shall not be positioned di
Page 221 and 222: Notes: • Available in 10 ft and 2
Page 223 and 224: K G a, lbs-moles/hr-ft 3 -mole frac
Page 225 and 226: MASS TRANSFER TOWER PACKING Mass Tr
Page 227 and 228: Notes: • Other plastics are avail
Page 229 and 230:
APPLICATIONS • Downstream of scru
Page 231 and 232:
B HF THERMOPLASTIC CENTRIFUGAL FANS
Page 233 and 234:
PVC (Polyvinyl Chloride) conforming
Page 235 and 236:
Handling strength, however, is not
Page 237 and 238:
GUIDELINES FOR PROCESSING AND MACHI
Page 239 and 240:
INSTALLATION INSTRUCTIONS SOLVENT W
Page 241 and 242:
JOINING 1. Immediately upon fi nish
Page 243 and 244:
Number of Joints Per...* PIPE SIZE
Page 245 and 246:
INSTALLATION INSTRUCTIONS 3. Simult
Page 247 and 248:
INSTALLATION INSTRUCTIONS DIMENSION
Page 249 and 250:
CAUTION: THE METAL BARREL OF THE WE
Page 251 and 252:
2. A tapered plug must be inserted
Page 253 and 254:
TRENCHING The trench should be of a
Page 255 and 256:
condition. Where water fl ooding is
Page 257 and 258:
Temperature Correction Factors Oper
Page 259 and 260:
4. A check valve installed near a p
Page 261 and 262:
Normally, piping systems are design
Page 263 and 264:
Many commercial, industrial and gov
Page 265 and 266:
CHEMICAL RESISTANCE GUIDE FOR VALVE
Page 267 and 268:
PLASTICS AND ELASTOMERS AT MAXIMUM
Page 269 and 270:
CHEMICALS AND FORMULA CONCENTRATION
Page 271 and 272:
Page 273 and 274:
CONCENTRATION CHEMICALS AND FORMULA
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
COLLAPSE PRESSURE - PVC DUCT Graph
Page 289 and 290:
I. STANDARDS FOR MEASURING HEADS AN
Page 291 and 292:
HEAD - The ability of a pump to pus
Page 293 and 294:
CORRECTION FACTORS CAPACITY AND EFF
Page 295 and 296:
Symbols 60 Series Hot Tap Ph / ORP
Page 297 and 298:
Hayward EVR Electric Actuator 3-24
Page 299 and 300:
PVC And CPVC S80 Expansion Joints 1
Page 301 and 302:
TERMS PRICES All prices shown are s
Page 303 and 304:
NOTES 10 10-71
Page 305 and 306:
NOTES 10 10-73
Page 307 and 308:
HWY. 27 176 ST. (HWY 15) 149 ST. MA
show all

chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?