Honda P50 Shop Manual [22 MB] - Project Moped Manual

In connect ion with the act ion of the rear brake
cam, the stop switch is actuat ed to light up the stop
lamp.
The stop switch is a self -adjusting type, which
does not require adjustment and lights up the stop lamp
by a specified movement of t he left brake lever regard ­
less of change in the c am lever posit ion due to wear
to the brake lining. (Fig. 4- 13)
Saddle
The saddle can be adjust ed t o any height. with
the bolt. w it hin the range of t he marking shown on t he
saddle pipe does not appear above the frame.
A hand g rip is provided to the rear and on the
underside o f t he saddle to use for raising the motor­
cycle on the stand. T he saddle also serves as a rear
cushion to dampen shocks. The saddle hinge is sup.
ported at t wo points to prevent the saddle from rolling.
(Fig. 4- 14. 15)
47
Fig. 4-13 OJ Stop switch spring
(?) Stop switch @ Rear brake cam
Fig. 4 -14 OJ Marking @ 8 X 42 hex bolt
Fig. 4-15 0,) Saddle cushion spring
@ Saddle hinge