Die-Demounter Lit Rev 2.pub - Quasys

quasys.de

Die-Demounter Lit Rev 2.pub - Quasys

Die-Demounter

Model 2010SD shown

Dymatix’s Die-Demounters can easily remove fully sawn wafers

from a film frame in less than thirty seconds. Dymatix offers a full

line of Die-Demounters that can handle wafers as large as 300

mm (Model 3010) and die sizes down to .25 mm square (Model

1010SD and 2010SD).

During operation, the operator places each wafer on a transport. A

breaker bar separates the leading edge of the film and feeds it into

a film separator. The die while maintaining their original orientation

are separated from the tape and spread loosely on a removable

tray. The tray can then be taken to another station for manual

die sorting. Several of these trays can be used simultaneously to

allow a number of operators to sort die.

There are no machine adjustments required when changing wafer

or die size. The full line of Dymatix Die-Demounters are versatile,

easy-to-use and require little operator training.

Die-Demounter

Die are spread evenly after

demounting for ease of handling

Features

• 6", 8" and 12" wafer capability,

dependent on model type

• Semi-automatic operation insures

no yield loss

• One setup runs all die sizes

• Versatile, easy-to-use

• Safe handling of die

• No mechanical adjustments


Model Designations

Specifications

Die Material: Si, GaAs, and other sawn matl

• Wafer Tape: ≤0.07 mm thickness (0.003 in.)

• Electrical: 120 VAC, 50/60 Hz, 2.0 Amps

• Air: 30 psi CDA (50 psi for 3010)

• Dimensions 34" x 19" x 11" (high)

(86 x 48 x 28 cm)

56" x 27" x 11" (high) for 3010

(142 x 69 x 28 cm)

• Weight 60 lbs (27 Kg)

(100 lbs (45 Kg) for Model 3010)

Options

Model Max. Wafer

Size (mm)

Min. Die

Size (mm)

1010D 200 (8 in.) 1.78 (0.070 in.)

2010 150 (6 in.) 0.50 (0.020 in.)

2010SD 150 (6 in.) 0.25 (0.010 in.)

3010 300 (12 in.) 0.76 (0.030 in.)

Die-Demounter

Min. Die

Thickness (mm)

0.38 (0.015 in.)

71 Daggett Drive

San Jose CA 95134

Tel: (408) 416-2700

Fax: (408) 416-2710

www.dymatix.com

Max. Film Frame

Inner Dia. (mm)

245 (9.64 in.)

1010SD 200 (8 in.) 0.25 (0.010 in.) 0.10 (0.004 in.) 245 (9.64 in.)

• 220 volt 50/60 Hz

• Anti-static sheets for 1010D and 1010SD

• 150' (45.7 m) roll of anti-static tape for 2010, 2010SD

and 3010

• Trays (Base system is supplied with (1) tray)

• UV Tape Conversion Kit

Note: All models designed for NITO tape. Peeling UV cured tape

requires UV Tape Conversion Kit option.

0.10 (0.004 in.)

0.10 (0.004 in.)

0.25 (0.010 in.)

194 (7.64 in.)

194 (7.64 in.)

350 (13.8 in.)

*Die-Demounter smoothly

peels the wafer

*Output tray is removable for

manual die sorting

*Note: 1010D displayed in photos

5/05

More magazines by this user
Similar magazines