CafeRomatica Fully automatic coffee centre Operating ... - Nivona

nivona.cz

CafeRomatica Fully automatic coffee centre Operating ... - Nivona

... 4. Programming functions 4.6 Language You can set 14 different languages: German, English, French, Italian, Dutch, Polish, Russian, Estonian, Czech, Swedish, Danish, Lithuanian, Hungarian and Turkish. The default setting is German. ➔ Press the program key P to enter programming mode. ➔ Press the > key until “WÄHLE SPRACHE” (“SELECT LANGUAGE”) appears ➔ Press the ok key. ➔ Press the > key until your desired language appears. ➔ Confirm your selection by press ing ok. The display reads “SELECT LANGUAGE”. ➔ You can now either continue in programming mode to change other function settings or press exit to leave programming mode. 4.7 Statistics This program allows you to read how often the following functions have been used since the machine started operating: “1 CUP” / “2 CUPS” / “POWDER” / “TOTAL” (number of coffees served) “WATER” / “STEAM” / “CLEANING” / “DESCALING” / “FIL. CHANGES”. ➔ Press the program key P to enter programming mode. ➔ Press the > key until “SELECT STA- TISTICS” appears. ➔ Press the ok key. ➔ Press the > key until the desired statistic appears. ➔ You can return to “SELECT STATIST- ICS” at any stage by pressing ok. ➔ You can now either continue in 16 programming mode to change other function settings or press exit to leave programming mode. 4.8 Rinsing setting The rinsing program (manually activated) is pre-programmed and installed by the manufacturer. Each time the appliance is switched on when it is cold from not having been used for a while, it heats itself up again and requires rinsing, in order to be thoroughly clean and to boil fresh water. This rinsing requirement will be shown in the display and by pressing the “S” button it can be manually started (fig. 1/ I). Optionally, you can also program it to automatically rinse after switching the appliance off: ➔ Press the program key P to enter programming mode. ➔ Press the > key until “SELECT RINSING” appears. ➔ Press the ok key. ➔ Press the > key to select “OFF RINSE YES” or “OFF RINSE NO” . ➔ Press the ok key to confirm. The display reads “SELECT RINSING”. ➔ You can now either continue in programming mode to change other function settings or press exit to leave programming mode. Note: Programmed OFF rinse, will only be carried out if a coffee has been previously made. 4.9 Energy / ECO Mode Your appliance is equipped with a modern, programmable power saving function (ECO Mode). This is factoryset and means that the appliance

More magazines by this user
Similar magazines