Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tech Note: Adjust baud rate of the <strong>SLS</strong>-<strong>500</strong> <strong>PLCs</strong><br />
Products:<br />
Revision: R100<br />
System analogue memory<br />
SIO_RJ11_BAUDRATE<br />
For all <strong>SLS</strong>-<strong>500</strong> Main Controllers and all <strong>SLS</strong>-<strong>500</strong>-Configurator versions<br />
The system analogue memory is required <strong>for</strong> the<br />
baud rate configuration. It is a fixed component of the<br />
system and contains the so-called System Variables.<br />
Example <strong>for</strong> 9600 Baud<br />
Programming<br />
Title: Initialisierung mit 9600 Baud<br />
9600 SIO_RJ11_BAUDRATE<br />
Example <strong>for</strong> 19200 Baud<br />
Programming<br />
Title: Initialisierung mit 19200 Baud<br />
19200 SIO_RJ11_BAUDRATE<br />
HIQUEL ® GmbH Bairisch Kölldorf 266, A - 8344 Bad Gleichenberg<br />
Tel: +43-3159-3001, Fax: +43-3159-30014, e-mail: hiquel@hiquel.com http: www.hiquel.com<br />
In this case the system variable<br />
SIO_RJ11_BAUDRATE is responsible to initialise the<br />
baud rate.<br />
The name can not be chosen individually since it is<br />
fixed in the system analogue memory. If a false name<br />
or baud rate is chosen the port can not be initialised.<br />
1.<br />
1. initialisation<br />
1.<br />
1. initialisation