Demag DR rope hoist - Demag Cranes & Components
Demag DR rope hoist - Demag Cranes & Components
Demag DR rope hoist - Demag Cranes & Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
20364044.p65/081105<br />
Technical data<br />
Transmission ratio:<br />
Switch contacts:<br />
Contact type:<br />
Cam disc:<br />
Switching point repeat accuracy:<br />
Electrical connection:<br />
Technical features:<br />
Compliance with standards<br />
Ambient temperature<br />
Type of enclosure<br />
Insulation class<br />
Approvals<br />
Technical features of<br />
switching elements:<br />
Positive opening to rated operating voltage<br />
Ui Thermal continuous current Ith Category acc. to VDE 0660:<br />
Mechanical service lives in switching<br />
cycles<br />
Terminal identification<br />
Approvals<br />
Current load to plug connector<br />
Outer dimensions:<br />
Length up to pinion cover<br />
Enclosure dimensions<br />
Overall height<br />
i = 205 with block setting of all cam disks designed for min. >1x10 6 switching<br />
operations<br />
4<br />
Change-over contact, snap-action contact, NC with automatic disconnection,<br />
contact material: silver/silver<br />
with 15° leading cams<br />
approx. +/-15 mm on hook, least favourable case for 2/1 reeving and hook path<br />
12 m. In this case, the 47 revolutions on the drive shaft result in an adjusting angle<br />
of 79,71° on the cam shaft for i = 205.<br />
Terminal strip direct connection on PCB.<br />
EN 60204-1 IEC 947-5-1 EN 60947-T5-1<br />
EN 60529 EN 50013 IEC 536<br />
Continuous operation -40 °C to +80 °C<br />
IP 54<br />
Class II<br />
CE and CSA<br />
VDE 0660 part 200 from 7/92<br />
250 V AC and 24/80 V DC<br />
6 A<br />
AC-15, 230 V AC/1,5 A<br />
DC-13, 60 V DC/0,5 A<br />
10 x 106 switching operations<br />
Acc. to EN 50013<br />
CE-UL/CSA<br />
6 A / 85 °C 250 V AC<br />
approx. 165 mm<br />
approx. 91 x 72 mm<br />
approx. 95 mm<br />
21
Change language